L a m i n a t e P l a s t e r b o a r d sCanBerra

etf yaxley reserve the right to make substitutions and modifications to the specifications of any of its products without prior notice. It is the customer’s responsibility to ensure that the Company’s productsare correctly installed and that they are suitable for the customer’s particular requirements and application. The Company undertakes business only upon its standard terms and conditions.

For further information please contact:etf yaxley

Yaxley, Eye, Suffolk IP23 8BWTel: 01379 783465Fax: 01379 783659

email: sales@stramit.comweb: www.eleco.com

L a m i n a t e P l a s t e r b o a r d sCanBerra

CanBerra Laminate Plasterboards create a new reference standard in partitioning finishes. Using the finestcomponents, they are made from either 9.5mm, 12.5mm or 15mm high-quality plasterboard substrate,faced with a carefully selected 0.9mm thick decorative laminate to both sides or single-sided with a balancer.

Application: Wall linings, stud partitioning and clean rooms.

Standard high pressure laminate (HPL) used is 0.9mm thickness from two colourranges (Polyrey and Arpa). Other quality brands can also be accommodated.

• All laminates finish 0-3mm from any edge

• Fire-rated option

• Colour swatches available

• Standard board sizes 1981, 2400, 2700, 3000mm

• Board thickness nominal (+1mm -0mm)11.3mm (9.5mm) 14.3mm (12.5mm) 16.8mm (15mm)

• Cutting service

• ISO 9001

Panel Sizes 1981mm x 1200mm 2400mm x 1200mm 2700mm x 1200mm 3000mm x 1200mm

Weightper m2

(nominal)

9.5mm 22kg 26kg 29kg 33kg

12.5mm 26kg 32kg 36kg 40kg

15.0mm 31kg 38kg 42kg 47kg

etf yaxleyan Eleco plc company