CBI Additive Jet Fuel Injection System in CSC Approved …cbi.dk/documents/Go4 NATO Additive...
Transcript of CBI Additive Jet Fuel Injection System in CSC Approved …cbi.dk/documents/Go4 NATO Additive...
Additive Jet Fuel Injection
CBI Additive Jet Fuel Injection Systemin CSC Approved 20´ ContainersNATO Code 4235-22-607-9088t
Automated InjectionThe CBI Additive Injection Container unit has been developed specifically for military pur-poses and over the past decade it has proven its stability in harsh conditions around the world, in which all the components has been working flawlessly.
The unit has been developed in accordance with NATO specifications and has been ap-proved by NATO for use with Aviation type Turbine Fuels (Kerosene) such as • NATO F-34 (JP-8)• NATO F35• JP-8+100 (B-fluid)
Injection Additives (others available)Additive one FSll anti-icing additive
(assumed) ≤ 2.000 PPM Additive two Corrosion inhibitor
(assumed) ≤ 120 PPMAdditive three SDA Stadis 450
(assumed) ≤ 36 PPM
All the equipment is fitted into a standard CSC approved (ISO 668, ISO 1161) container. Ac-cess is provided through two standard con-tainer doors in one end to enter the contain-er, and one door on the side to allow access for pallet tanks (1,000 liter) by forklift, and a window to oversee the operation.
Furthermore there is a bracket for one 200 lit-er Chemical Drum with Corrosion Inhibitor; a 20 liter drum of SDA Stadis and a sump inside the container to take any unwanted of the ad-ditives or from the pallet tank. The sump has a drain valve.
The container is insulated with 45 mm pre-in-sulated plates covered with galvanized sheets and have self-regulated electrical heating el-ements (EEx) and light (Ex) installed with EU connection outside the container.
Using the customized con-trol unit the Additive Fuel Injection offers the follow-ing advantages
• Fully automated Injection • Easy to operate• Easy to install• Fitted into a 20´ CSC ap-
proved container• Blending to exact specifi-
cation
TURNKEY SOLUTIONS
There are many variables to take into account when fitting an Additive Injec-tion System and our highly skilled engineers will adapt our system to fit your exact requirements.
TECHNICAL SUPPORT
We are with you all the way. Before, during and after the installation to secure a flaw-less integration and opera-tion.
ZERO DOWNTIME
As a central part of a fuel delivery system; mechanical stability, toughness and dura-bility is an important aspect of the manufacturing and design philosophy.
For more information on these or other of our prod-ucts or services please visit us on the Web at:
www.cbi.dk
The specifications are based on specific requirements for injection.
Other injection specifications are available on request.
Additive Jet Fuel Injection
Technical Specifications
Go4 Bunker ApSLille Blodevej 3
3600 FrederikssundDenmark
+45 4731 3388www.cbi.dk
SERVICES AVAILABLE
Consulting ServicesTechnical SupportInstallation and SetupMaintenanceWarranty
Hammonds Additive Injector Unit – Modified ISOIL - Flow MeterModel 800 – 1L – 1S – 1P7 Model BM400
Driver Positive displacement Size 4”
Connections 4” flanged ANSI 150 lbs Flanges ANSI 150
Housing Material Aluminium Working pressure ≤ 10 bar
Rotor material Aluminium Manifold and flanges Carbon Steel
Drive Direct and through reduc-tion gearbox
Body Ni-Resist
Min. product flow 285 liter per minute Rotor Aluminium
Max. product flow 2,850 liter per minute Vanes Carbon
Max. line pressure ≤10 barG Seals Viton
Max. operating pressure ≤10 barG (at point of injection) Bearings Stainless Steel
Additive one Range 200 @ 1,500 PPM
Additive two Range 30 @ 120 PPM
Additive three Range <10 @ 36 PPM
VAF Instrument - Flow MetersModel M32 for FSII (1 ea.)
M31 for Corrosion Inhibitor/SDA Stadis (2 ea.)
Connection size M31 – DN8 (1/4”)M32 – DN12 (3/8”)
Mounting Horizontal with counter on top (required at low pressure)
Flow direction From left-to-right (can be switched)
Material housing Stainless Steel 316
Pistons Stainless Steel
Flow range M31 0..16 liter/hr (24 hr/day)0..20 liter/hr ( 8 hr/day)
Flow range M32 0..160 liter/hr (24 hr/day)0..200 liter/hr ( 8 hr/day)
Accuracy Better than 0.5 %
Actual flow Range 1:10
Repeatability Better than 0.05 %
Working pressure Maximum 25 bar
Working temperature -15oC to +75oC
Counter Mechanical 6 digits, not reset able
Smallest read-out M31 – 0.01 literM32 – 0.1 liter
Material certificate According to EN 10204-3.1.B
Factory Test cert. According to VAF-standard
Other specifications available on request.