CB140-DM45: Camera Bracket
Transcript of CB140-DM45: Camera Bracket
CB140-DM45: Camera Bracket
General Information/Key Features
• UPC: 0842571125306• UNSPSC: 31162506• Harmonization Code: 8471900000• Country of Origin: CN
Related Pages (Right click to open in new tab)
Shop Now. Visit the CB140-DM45 product page for detailed information
View other Hikvision Camera BracketsView over 1300 video surveillance products from Hikvision
Scroll down to view the Hikvision CB140-DM45 specification sheet
© 2019 Hikvision USA Inc. • All Rights Reserved • Specifications subject to change without notice. Hikvision USA Inc., 18639 Railroad Street, City of Industry, CA 91748, USA • Hikvision Canada, 4848 rue Levy, St-Laurent, Quebec, Canada, H4R 2P1 Tel: +1-909-895-0400 • Toll Free in USA: +1-866-200-6690 • E-Mail: [email protected] • www.hikvision.com Rev. 091819NA
CB140-DM45 Junction Box
• Aluminum Alloy with Surface Spray Treatment
• Side and Bottom Inlets
• Interchangeable Bottom, Water-Resistant Cover, and Side Gland Nut
• Applies to Indoor and Outdoor Conditions
Install the junction box on a flat surface.
The included waterproof rubber gasket is necessary for outdoor applications.
The wall must be capable of supporting at least three times as much as the total weight of the camera and the junction box.
The maximum load capacity of the junction box is 3 kg (6.6 lb).
Available Models: CB140-DM45
Specifications Parameters CB140-DM45 Junction Box
Appearance Hikvision white Material Aluminum alloy
Dimension Φ140 mm × 40 mm (Φ5.51" × 1.57") Weight Approximately 237 g (0.52 lb)
Dimensions