ca_vcb_mv_eng
description
Transcript of ca_vcb_mv_eng
-
For your safety, please read user's manual thoroughly before operating.Contact the nearest authorized service facility for examination, repair, or adjustment.Please contact qualified service technician when you need maintenance.
Do not disassemble or repair by yourself!Any maintenance and inspection shall be performed by the personnel having expertise concerned.Safety Instructions
LS Industrial Systems (Middle East) FZE Dubai, U.A.E. Address: P.O.Box-114216, API World Tower, 303B, Sheikhe Zayed Road, Dubai, U.A.E. Tel: 971-4-886 5360 Fax: 971-4-886-5361 e-mail: [email protected] LS Industrial Systems Co., Ltd. Dalian, China
Address: No.15, Liaohexi 3-Road, Economic and Technical Development zone, Dalian 116600, ChinaTel: 86-411-8273-7777 Fax: 86-411-8730-7560 e-mail: [email protected] Industrial Systems (Wuxi) Co., Ltd. Wuxi, China
Address: 102-A , National High & New Tech Industrial Development Area, Wuxi, Jiangsu,214028, P.R.ChinaTel: 86-510-8534-6666 Fax: 86-510-522-4078 e-mail: [email protected] Industrial Systems Co., Ltd. Hanoi, Vietnam
Address: Nguyen Khe - Dong Anh - Ha Noi - Viet NamTel: 84-4-882-0222 Fax: 84-4-882-0220 e-mail: [email protected] Industrial Systems Co., Ltd. Hochiminh , Vietnam
Address: 41 Nguyen Thi Minh Khai Str. Yoco Bldg 4th Floor, Hochiminh City, VietnamTel: 84-8-3822-7941 Fax: 84-8-3822-7942 e-mail: [email protected] Industrial Systems Tokyo Office Tokyo, Japan
Address: 16FL, Higashi-Kan, Akasaka Twin Tower 17-22, 2-chome, Akasaka, Minato-ku Tokyo 107-8470, JapanTel: 81-3-3582-9128 Fax: 81-3-3582-2667 e-mail: [email protected] LS Industrial Systems Shanghai Office Shanghai, China
Address: Room E-G, 12th Floor Huamin Empire Plaza, No.726, West Yan'an Road Shanghai 200050, P.R. ChinaTel: 86-21-5237-9977 (609) Fax: 89-21-5237-7191 e-mail: [email protected] Industrial Systems Beijing Office Beijing, China
Address: B-Tower 17FL.Beijing Global Trade Center B/D. No.36, BeiSanHuanDong-Lu, DongCheng-District,Beijing 100013, P.R. ChinaTel: 86-10-5825-6025,7 Fax: 86-10-5825-6026 e-mail: [email protected] Industrial Systems Guangzhou Office Guangzhou, China
Address: Room 1403,14F,New Poly Tower,2 Zhongshan Liu Road,Guangzhou, P.R. ChinaTel: 86-20-8326-6764 Fax: 86-20-8326-6287 e-mail: [email protected] Industrial Systems Chengdu Office Chengdu, China
Address: 12Floor, Guodong Building, No52 Jindun Road Chengdu, 610041, P.R. ChinaTel: 86-28-8612-9151 Fax: 86-28-8612-9236 e-mail: [email protected] Industrial Systems Qingdao Office Qingdao, China
Address: 7B40,Haixin Guangchang Shenye Building B, No.9, Shandong Road Qingdao 26600, P.R. ChinaTel: 86-532-8501-6568 Fax: 86-532-583-3793 e-mail: [email protected]
HEAD OFFICELS Tower, 1026-6 Hokyeh 1dong, Dongan-gu, Anyang, Kyonggi-Do, 431-848, KoreaTel. (82-2)2034-4870Fax. (82-2)2034-4713
CHEONG-JU PLANTCheong-Ju Plant #1, Song Jung Dong, Hung Duk Ku,Cheong Ju, 361-720, Korea
Global Network
Electric Equipmentwww.lsis.biz
Specifications in this catalog are subject to change without notice due to continuous product development and improvement.
2008. 11 Vacuum Circuit Breakers/Vacuum Interrupter(E) 2008. 11/(01) 2008. 11 Printed in Korea STAFF
V
a
c
u
u
m
C
i
r
c
u
i
t
B
r
e
a
k
e
r
s
V
a
c
u
u
m
I
n
t
e
r
r
u
p
t
e
r
2008.11 LS Industrial Systems Co.,Ltd. All rights reserved.
Pro-MECVacuum Circuit Breakers
Vacuum Interrupter
VCB_E__0811 2008.11.25 11:38 PM 1
-
Ratings H1-4Constructional and operating characteristics H1-10Control circuit diagram H1-117.2kV dimension H1-1212kV dimension H1-2317.5kV dimension H1-2424kV dimension H1-36Accessories H1-44Types and ordering information H1-49
Vacuum Circuit Breaker
Features & Ordering information H1-52Structure H1-53Operating characteristics H1-54Ratings and Specifications H1-55Dimensions H1-58
Vacuum Interrupter
Pro-MEC VCB/VI
H1Contents
-
Key Lock Padlock of earthing switch Button padlock Position switch of the earthing switch Button cover Locking coil of earthing switch Position switch (Cell switch) Shutter padlock Preparatory trip coil (Secondary trip coil) MOC (Mechanically operated cell switch)
Latch checking switch TOC (Truck operated cell switch) Charge indicator Code plate (Miss insertion prevention) Position padlock Capacitor trip device Earthing switch Note 1) Rectifier
Note 1) The earthing switch is not available for 17.5kV VCB.
Wide range of accessories (optional)
LS Pro-MEC VCB is user-friendly to give more convenience and safety by providing high speed interrupting time (3cycles), adopting the rapid auto-reclosing method, and having wide range of accessories.
7.2kV Draw-out (F class)24kV Draw-out (F class)
Vacuum Circuit BreakerVacuum Circuit Breaker
H1-2
-
High reliability of the operating mechanism- Separate design of the main circuit from theoperating mechanism.
- Adopt the toggle link method.- Improved the reliability of electric circuit.- Adopt the rapid auto-reclosing method as a standard option. (O-0.3sec.-CO-3min.-CO)
Make short of the interrupting time. (3cycles)Increase the rated short-circuit withstand
characteristics. (1sec. to 3sec.)
Reinforce the insulation in the conduct, by adopting the molded housing in each phase. Built in the device making the contacts open first when draw in and out. Adopt the tulip-shape connection between the cradle and the VCB.
High interrupting performance Great operational safety
Compasion table for VCB (Short circuit test)[ ]
Compasion table for VCB (Short circuit test)
VACUUM CIRCUIT BREAKER
H1-3
-
Vacuum Circuit Breaker
H1-4
Ratings
Type LVB-06-20D LVB-06-25DRated voltage (kV) 7.2 7.2Rated normal current (A) 630 1250 2000 630 1250 2000Rated frequency (Hz) 50/60 50/60 Rated short-circuit breaking current (kA) 20 25Rated short-circuit breaking capacity (MVA) 250 310Rated short-time withstand current (kA/3sec) 20 25Rated short-circuit making current (kAp) 52 65Rated breaking time (Cycle) 3 3Rated opening time (sec) 0.04 0.04No-load closing time (sec) 0.06 0.06Withstand Power frequency (kV/min) 20 20voltage Impulse (kV/1.250) 60 60Rated operating sequence O-0.3s-CO-3min-CO O-0.3s-CO-3min-CO
TypeMechanical M2 (10,000 times) M2 (10,000 times)
test Electrical E2 (List1) E2 (List1)Capacitive current switching Note 1) C2 C2
MechanicalWithout maintenance (Time) 20000 20000
LifetimeMaintenance (Time) 30000 30000
ElectricalWithout maintenance (Time) 20000 20000Maintenance (Time) 30000 30000
Auxiliary switch 4a4b, 10a10b 4a4b, 10a10bFixed Visible, Fixed Visible, Fixed Visible, Fixed Visible, Fixed
E-type Visible, Clip Visible, Tulip Visible, Clip Visible, TulipInstalling
Draw-out F-type Visible, Clip Visible, Tulip Visible, Clip Visible, Tulip
methodtype G-type Note 2)
- Visible, Clip Visible, Tulip Visible, Clip Visible, TulipT Enclosed, Tulip Enclosed, Tulip Enclosed, Tulip Enclosed, Tulip
M-type Note 2) Enclosed, Tulip Enclosed, TulipE-type (kg) 94 99 134.5 94 99 134.5
VCB F-type (kg) 95 100 135.5 95 100 135.5Weight G, M-type (kg) 95 (137) 100 (147) 135.5 (163.5) 95(137) 100(147) 135.5(163.5) Note 3) E-type (kg) 37 39.5 60 37 39.5 60
Cradle F-type (kg) 39 41.5 62.5 39 41.5 62.5G-type (kg) 39(103) 41.5(107) 62.5(117) 39(103) 41.5(107) 62.5(117)
Applied standard IEC 62271-100 IEC 62271-100Test laboratory KERI Note 4)
Note 1) Applied cable-charging current switching test2) In the event of ordering Enclosed Tulip type for G class VCB, please add T in the end of type name. (Ex: LVB-06G-20D/06-1A2B-T)3) ( )* indicates the weight of Enclosed Tulip installing method VCB.4) KERI: Korea Electrotechnology Research Institute.
Visible VCB(Draw-out type)
E-type cradle(Visible, Clip contact)
E-type cradle(Visible, Tulip contact)
F -type cradle (Visible, Clip contact)
G-type cradle (Visible, Tulip contact)
-
H1-5
Type LVB-06-32D LVB-06-40DRated voltage (kV) 7.2 7.2Rated normal current (A) 1250 2000 3150 1250 2000 3150Rated frequency (Hz) 50/60 50/60 Rated short-circuit breaking current (kA) 31.5 40Rated short-circuit breaking capacity (MVA) 390 500Rated short-time withstand current (kA/3sec) 31.5 40Rated short-circuit making current (kAp) 82 104Rated breaking time (Cycle) 3 3Rated opening time (sec) 0.04 0.04No-load closing time (sec) 0.06 0.06Withstand Power frequency (kV/min) 20 20voltage Impulse (kV/1.250) 60 60Rated operating sequence O-0.3s-CO-3min-CO O-0.3s-CO-3min-CO
TypeMechanical M2 (10,000 times) M2 (10,000 times)
test Electrical E2 (List1) E2 (List1)Capacitive current switching Note 1) C2 C2
MechanicalWithout maintenance (Time) 20000 20000
LifetimeMaintenance (Time) 30000 30000
ElectricalWithout maintenance (Time) 20000 20000Maintenance (Time) 30000 30000
Auxiliary switch 4a4b, 10a10b 4a4b, 10a10bFixed Visible, Fixed Visible, Fixed Visible, Fixed Visible, Fixed
E-type Visible, Tulip Visible, Clip Visible, Tulip Visible, TulipInstalling
Draw-outF-type Visible, Tulip Visible, Tulip Visible, Tulip Visible, Tulip
methodtype G-type Note 2)
- Visible, Tulip Visible, Tulip Visible, Tulip Visible, TulipT Enclosed, Tulip - Enclosed, Tulip -
M-type Enclosed, Tulip - Enclosed, Tulip -E-type (kg) 131.5 134.5 210 135 138 210
VCB F-type (kg) 132.5 135.5 211 136 139 211Weight G, M-type (kg) 132.5(159) 135.5(160) 220 136(162.5) 139(163.5) 220 Note 3) E-type (kg) 52 60 131 52 60 131
Cradle F-type (kg) 54.5 62.5 135 54.5 62.5 135G-type (kg) 62.5(110) 135(117) 155 62.5(110) 135(117) 155
Applied standard IEC 62271-100 IEC 62271-100Test laboratory KERI Note 4)
Note 1) Applied cable-charging current switching test2) In the event of ordering Enclosed Tulip type for G class VCB, please add T in the end of type name. (Ex: LVB-06G-20D/06-1A2B-T)3) ( )* indicates the weight of Enclosed Tulip installing method VCB.4) KERI: Korea Electrotechnology Research Institute
Enclosed VCB(Draw-out type, G-type)
G-type Cradle(Enclosed, Tulip contact)
Visible, Clip contact Visible, Tulip contact Enclosed, Tulip contact
-
Vacuum Circuit BreakerRatings
H1-6
Type LVB-12-25D/06, 12, 20-T LVB-12-32D/12, 20-T, 30 LVB-12-40D/12, 20, 30Rated voltage (kV) 12 12 12Rated normal current (A) 630 1250 2000 1250 2000 3150 1250 2000 3150Rated frequency (Hz) 50(E1,C2: KEMA), 60(E2: PT & T) 60(E1,E2,C2: PT & T) 50(E1,C2:KEMA), 60(M2,E2,C2: PT & T)Rated short-circuit breaking current (kA) 25 31.5 40Rated short-circuit breaking capacity (MVA) 500 650 831Rated short-time withstand current (kA/3sec) 25 31.5 40Rated short-circuit making current (kAp) 62.5 81.9 104Rated breaking time (Cycle) 3Rated opening time (sec) 0.04No-load closing time (sec) 0.06Withstand Power frequency (kV/min) 28voltage Impulse (kV/1.250) 75Rated operating sequence O-0.3s-CO-3min-CO
TypeMechanical M2 (10,000 times)
test Electrical E2 (List 1)Capacitive current switching Note 1) C2
MechanicalWithout maintenance (Time) 20,000
LifetimeMaintenance (Time) 30,000
ElectricalWithout maintenance (Time) 20,000Maintenance (Time) 30,000
Auxiliary switch 4a4b, 10a10bFixed -
Installing E-TYPE -
Method Draw-out F-TYPE -type G-TYPE Enclosed, Tulip Visible, Tulip Enclosed, Tulip Visible, Tulip
M-TYPE Enclosed, Tulip -E-TYPE (kg) -
VCB F-TYPE (kg) -
WeightG, M-TYPE (kg) 137 147 163.5 159 160 220 162 163 220E-TYPE (kg) - - - - - - - - -
Cradle F-TYPE (kg) - - - - - - - - -G, M-TYPE (kg) 103 107 117 110 117 155 110 117 155
Applied standard IEC 62271-100Test laboratory KEMA: E1, C2 PT & T: E2 Note 2) PT & T: E1, E2, C2, M2
Note 1) Applied cable-charging current switching test2) PT&T: Power Testing & Technology Institute (LSIS high-power laboratory)
-
H1-7
Type LVB-17-25D/06, 12, 20, 25 LVB-17-40D/12, 20,30 Rated voltage (kV) 17.5 17.5Rated normal current (A) 630 1250 2000 2500 1250 2000 3150Rated frequency (Hz) 50/60 60Rated short-circuit breaking current (kA) 25 40Rated short-circuit breaking capacity (MVA) 750 1200Rated short-time withstand current (kA/3sec) 25 40Rated short-circuit making current (kAp) 65 104Rated breaking time (Cycle) 3Rated opening time (sec) 0.04No-load closing time (sec) 0.06Withstand Power frequency (kV/min) 38voltage Impulse (kV/1.250) 95Rated operating sequence O-0.3s-CO-3min-CO
TypeMechanical M2 (10,000 times)
test Electrical E2 (List1)Capacitive current switching Note 1) C2
MechanicalWithout maintenance (Time) 20000
LifetimeMaintenance (Time) 30000
ElectricalWithout maintenance (Time) 20000Maintenance (Time) 30000
Auxiliary switch 4a4b,10a10bFixed Visible, Fixed -
InstallingDraw-out
E-TYPE Visible, Tulip -method
type F-TYPE Visible, Tulip -G-TYPE Visible, Tulip Visible, Tulip
Fixed type VCB (kg) 115 125 135 165 - - -E-TYPE (kg) 130 140 155 195 - - -
VCB F-TYPE (kg) 130 140 155 195 - - -
WeightG-TYPE (kg) 160 170 190 220 200 205 260E-TYPE (kg) 65 67 78 165 - - -
Cradle F-TYPE (kg) 75 77 88 172 - - -G-TYPE (kg) 100 105 115 185 175 175 200
Applied standard IEC 62271-100Test laboratory KEMA , PT&T
Note 1) Applied cable-charging current switching test.
-
Vacuum Circuit BreakerRatings
H1-8
Fixed type VCB E-type cradle F-type cradle G-type cradle(Withdrawable by screw)
G-type cradle(Withdrawable by lever)
Type LVB-20-13D LVB-20-13D/T LVB-20-16D LVB-20-16D/T LVB-20-25D LVB-20-25D/TRated voltage (kV) 24 24 24Rated normal current (A) 630 630 630
1250 1250 12502000
Rated frequency (Hz) 50/60 50/60 50/60Rated short-circuit breaking current (kA) 12.5 16 25Rated short-circuit breaking capacity (MVA) 520 665 1000Rated short-time withstand current (kA/3sec) 12.5 16 25Rated short-circuit making current (kAp) 32.5 40 65Rated breaking time (Cycle) 3 3 3Rated opening time (sec) 0.04 0.04 0.04No-load closing time (sec) 0.06 0.06 0.06Withstand Power frequency (kV/min) 50 50 50voltage Impulse (kV/1.250) 125 125 125Rated operating sequence O-0.3s-CO-3min-CO O-0.3s-CO-3min-CO O-0.3s-CO-3min-CO
TypeMechanical M2(10,000 times) M2(10,000 times) M2(10,000 times)
test Electrical E2 (List1) E2 (List1) E2 (List1)Capacitive current switching Note 1) C2 C2 C2
MechanicalWithout maintenance (Time) 20000 20000 20000
LifetimeMaintenance (Time) 30000 30000 30000
ElectricalWithout maintenance (Time) 20000 20000 20000Maintenance (Time) 30000 30000 30000
Auxiliary switch 4a4b, 10a10b 4a4b, 10a10b 4a4b, 10a10bFixed Visible, Fixed - Visible, Fixed - Visible, Fixed -
E-type Visible, Clip Enclosed, Tulip Visible, Clip Enclosed, Tulip Visible, Clip Enclosed, TulipInstalling
Draw-out F-type Visible, Clip Enclosed, Tulip Visible, Clip Enclosed, Tulip Visible, Clip Enclosed, Tulipmethod
type G-type Note 2) Visible, Tulip Enclosed, Tulip Visible, Tulip Enclosed, Tulip Visible, Tulip Enclosed, TulipM-type - Enclosed, Tulip - Enclosed, Tulip - Enclosed, TulipE-type (kg) 145 145 145 145 145 145
VCB F-type (kg) 145 145 145 145 145 145
Weight G, M-type (kg) 155 187 155 187 155 187/218 (2000A)E-type (kg) 80 80 80 80 80 80
Cradle F-type (kg) 82 82 82 82 82 82G-type (kg) 110 120 110 120 110 120
Applied standard IEC 62271-100 IEC 62271-100 IEC 62271-100
Test laboratory KERI - KEMA -
Note 1) Applied cable-charging breaking current2) In the event of ordering Enclosed Tulip type for G class VCB, please add T in the end of type name. (Ex: LVB-06G-20D/06-1A2B-T)
-
H1-9
VCBON OFF
a contactON OFF
bcontactOFFON
Motor
Closing Coil (C)The coil operated only when the power is applied continuouslyover 45ms. It has built-in electrically anti-pumping circuit.
Position of the Aux.contact switch
Note 1) Range of the normal operating voltage: 85~110%2) DC 24V is the underdeveloped rating.
Shunt coil (TC)When the VCB is 'ON' position, even though the control powerof a shunt coil is 'OFF', the VCB maintains the 'ON' position.
Note 1) Range of the normal operating voltage: 70~110%2) DC 24V is the underdeveloped rating.
Auxiliary switchStandard 4a4b / Optional 10a10b
Charge indicator ofthe closing springIndicating the condition of the closing spring.
Position indicator of the main contactsIndicating the 'Close' or the 'Open' of the main contacts.Close position: ON Open position: OFF
CounterMechanically counts the switching of the VCB by 5digits analog type counter (Standard option)
Charged Discharged
Close position Open position
When the closing spring is charged, the control power of motor is turned off by the built-in limit s/w.
Note 1) Range of the normal operating voltage: 85~110%2) DC 24V is the underdeveloped rating.
Note) The contact capacity of the following accessories are the same with that of the Aux. switch. Position switch, Closing springcontact, Charging complete indicating contact, Position switch of the earthing switch, Mechanically operated cell switch,Truck operated cell switch.
The peak value of the Consumption Charging timeRated voltageinrush current (A) Rated current (A) power (W) (Sec.)
DC 48V 21 4 350 13DC 110V 20 3 330 12DC 125V 20 3 330 12DC 220V 17 2.6 374 12
Classification General Inductive Contact load (A) load (A) configuration
AC250V 10 5125V 10 5
Contact Ratings 250V 10 5 4a4b
DC 125V 10 5 10a10b
30V 10 5
Rated voltage Rated current (A)
DC 48V 6DC 110V 3DC 125V 3DC 220V 2.5
Rated voltage Rated current (A)
DC 48V 6DC 110V 3DC 125V 3DC 220V 2.5
-
Vacuum Circuit Breaker
H1-10
Constructional and operating characteristics
Manual chargeInsert the charge handle into the manual charge hole in the front of aVCB, and rotate it to clockwise over 40times and the chargecomplete with a metal sound.
Motor chargeIf you apply the control power to a VCB, the closing spring will becharged automatically by a motor and then the control power will beturned off by the built-in limit s/w. Please use the same controlvoltage for motor, Closing coil, Trip coil.
Sequence of the switching mechanism
Charge Indicator of the closing spring
Close button Key lock (Optional) Trip buttonManual charge hole Position indicator
of the main contacts Counter Screw hole for draw-in
and draw-out NameplateMounting hole Safety cover
-
H1-11
Control circuit diagram
: E
xtern
al te
rmina
l of V
CB52
: Vac
uum
circ
uit b
reak
erM
: Spr
ing ch
argin
g moto
rTC
: Trip
coil
TC1:
Seco
ndar
y Trip
coil
C: C
losing
coil
Y: A
nti-p
ump r
elay
52a:
Aux
iliary
switc
h (N
O)
52b:
Aux
iliary
switc
h (N
C)LS
1: Cl
osing
inter
lock l
imit s
witch
(only
withd
rawab
le typ
e)LS
2: M
otor s
toppin
g, clo
sing s
pring
char
ged i
ndica
tion
LS3:
Anti-c
losing
, anti
-pum
ping l
imit s
witch
LCS1
: Ope
ning
latch
che
cking
swi
tch(pr
even
ting c
losing
unles
s the
trip
latch
is pr
oper
ly re
set)
LS4,
LS5:
Posit
ion s/
w (clo
se in
test p
ositio
n)LS
6, LS
7: Po
sition
s/w
(close
in run
positi
on)
Note
1) LC
S1: La
tch ch
ecking
switch
2) Tr
ip coil
superv
ision (
Trip c
oil mo
nitoring
conta
ct)3)
Positi
on sw
itch: 4a
(Term
inal N
o.: 1, 2
, 3, 4,
5, 6, 7,
8)4)
TC1: S
econd
ary trip
coil (P
repara
tory tr
ip coil
Term
inal N
o.: 82
,83)
5) In
fixed ty
pe VC
B, LS
1 (Clo
sing-c
oil lim
it swit
ch) is
not av
ailable
.
Abov
e circ
uit di
agram
is ba
sed o
n OF
F sta
tus of
VCB
. and
clos
ing sp
ring i
s cha
rged.
Optio
nal a
cces
sorie
s
Conn
ectin
g ter
mina
l arra
ngem
ent
B Ty
peA
Type
-
H1-12
Vacuum Circuit Breaker7.2kV dimension (VCB)
LVB-06P-20D, 25D, 32D, 40D (Visible, Fixed) - (630/1250/2000A)
LVB-06P-32D, 40D (Visible, Fixed) - (3150A)
Rating 630A 1250AA 6 10
Top
Top
SideFront
SideFront
*125.5 applied to all 7.2kV VCB.
(Unit: mm)
-
H1-13
LVB-06E, F, G-20D, 25D, 32D, 40D E, F, G class - (630/1250/2000A)
LVB-06G-20D/T, 25D/T, 32D/T, 40D/T G class (Enclosed, Tulip contact) - (630/1250/2000A)
Rating 630A 1250AA 6 10
SideFront
Top
SideFront
(Unit: mm)
-
Vacuum Circuit Breaker7.2kV dimension (VCB)
H1-14
LVB-06E-32D, 40D E class (Visible, Tulip contact) - (3150A)SideFront
LVB-06F-32D, 40D F class (Visible, Tulip contact) - (3150A)SideFront
Top
Top
(Unit: mm)
-
H1-15
LVB-06G-32D, 40D G class (Visible, Tulip contact) - (3150A)SideFront
Top
(Unit: mm)
-
Vacuum Circuit Breaker
H1-16
7.2kV dimension (Cradle)
(Unit: mm)LCL-06E-20D, 25D E class (Visible, Clip contact) - (630/1250A)
Rating 630A 1250AA 6 10B 55 60C 95 90
SideFront
Top
-
H1-17
LCL-06E-32D, 40D E class (Visible, Tulip contact) - (3150A)Side TopFront
LCL-06E-20D, 25D, 32D, 40D E class (Visible, Tulip contact)Front
Top
(Unit: mm)
SideRating 1250A 2000A
A 10 20
-
Vacuum Circuit Breaker7.2kV dimension (Cradle)
H1-18
LCL-06F-20D, 25D F class (Visible, Clip contact) - (630/1250A)(Unit: mm)
Rating 630A 1250AA 6 10B 55 60C 95 90
Side
Side
Front
Top
LCL-06F-20D, 25D F class (Visible, Tulip contact) - (2000A)Front
Top
-
H1-19
LCL-06F-32D, 40D F class (Visible, Tulip contact) - (3150A)SideFront
Top
LCL-06F-32D, 40D F class (Visible, Tulip contact) - (1250/2000A)Front
Top
(Unit: mm)
SideRating 1250A 2000A
A 10 20
-
Vacuum Circuit Breaker7.2kV dimension (Cradle)
H1-20
LCL-06G-20D, 25D, 32D, 40D G class (Visible, Clip contact) - (630/1250/2000A)(Visible, Tulip contact) - (31.5/40kA 1250/2000A)
Rating 630A 1250A 2000AA 6 10 20
SideFront
Top
(Unit: mm)
-
H1-21
LCL-06G-20D/T, 25D/T, 32D/T, 40D/T G class (Enclosed, Tulip contact) - (630/1250/2000A)
Rating 20/25kA 31.5/40kA630A 1250A 2000A 1250A 2000A
A 6 12 25 12 25B 29 48 48
SideFront
Top
(Unit: mm)
-
Vacuum Circuit Breaker7.2kV dimension (Cradle)
H1-22
LCL-06G-32D, 40D G class (Visible, Tulip contact) - (3150A)(Unit: mm)
Side
Top
*To connect with VCBs bushing terminalsuser busbar should have below dimensionsand two holes.
-
H1-23
Top
12kV dimension (VCB)
LVB-12G-25D/T, 32D/T G class (Enclosed, Tulip contact) - (630/1250/2000A)
LVB-12G-40D G class (Enclosed, Tulip contact) - (1250/2000A)
(Unit: mm)
SideFront
470
668
496
150 150
549
726.
5
295
330325
33.5 10288
438
69
355
40kA 1250/2000A G class
SideFront
-
Vacuum Circuit Breaker12kV dimension (VCB)
H1-24
LVB-12G-40D G class (Enclosed, Tulip contact) - (3150A)
40kA 3150A G class
714
620
360
336
210210
325
290
502747
676
1034
8.5
806.
6
SideFront
Top
(Unit: mm)
-
H1-25
12kV dimension (Cradle)
LCL-12G-25D/T, 32D/T G class (Enclosed, Tulip contact) - (630/1250/2000A)
Rating 25kA 31.5kA630A 1250A 2000A 1250A 2000A
A 12 25 12 25B 29 48
SideFront
Top
(Unit: mm)
-
Vacuum Circuit Breaker12kV dimension (Cradle)
H1-26
LCL-12G-40D G class (Enclosed, Tulip contact) - (1250/2000A)
RUN
731.5
94663
029
5
1235
150
150
560
600
100 662
26
8326
60
150150
1250A:12t2000A:25t
40kA 1250/2000A G class
4-14 Mount hole
SideFront
Top
(Unit: mm)
-
H1-27
LCL-12G-32D/LCL-12G-40D G class (Enclosed, Tulip contact) - (3150A)
40kA 3150A G class
1014
230 230
120
3514
5
70
12 12
764
439
360
1100
210
724100
210
760
800
4-14 Mount hole
SideFront
Top
(Unit: mm)
-
Vacuum Circuit Breaker
H1-28
17.5kV dimension (VCB)
LVB-17P-25D (Visible, Fixed) - (630/1250/2000A)(Unit: mm)
Side
Top
Front
LVB-17P-25D (Visible, Fixed) - (2500A)Side TopFront
Rating 630A 1250A/2000AA 6 20
-
H1-29
LVB-17E, F-25D E, F class (Visible, Tulip contact) - (630/1250/2000A)
Top
SideFront
LVB-17E, F-25D E, F class (Visible, Tulip contact) - (2500A)
(Unit: mm)
Side TopFront
-
Vacuum Circuit Breaker17.5kV dimension (VCB)
H1-30
LVB-17G-25D G class (Visible, Tulip contact) - (2500A)
(Unit: mm)
SideFront Top
LVB-17G-25D G class (Visible, Tulip contact) - (630/1250/2000A)
Top
SideFront
-
H1-31
(Unit: mm)LVB-17G-40D G class (Visible, Tulip contact) - (1250/2000A)
Front Side
Front Side Top
Top
LVB-17G-40D G class (Visible, Tulip contact) - (3150A)
-
H1-32
Vacuum Circuit Breaker17.5kV dimension (Cradle)
(Unit: mm)LCL-17E-25D E class (Visible, Tulip contact) - (630/1250/2000A)
Rating 630A 1250A 2000AA 6 10 20
SideFront
Top
-
H1-33
LCL-17E-25D E class (Visible, Tulip contact) - (2500A)(Unit: mm)
Front Side
Top
-
Vacuum Circuit Breaker17.5kV dimension (Cradle)
H1-34
(Unit: mm)LCL-17F-25D F class (Visible, Tulip contact) - (630/1250/2000A)
Rating 630A 1250A 2000AA 6 10 20
SideFront
Top
-
H1-35
(Unit: mm)LCL-17F-25D F class (Visible, Tulip contact) - (2500A)Front Side
Top
-
Vacuum Circuit Breaker17.5kV dimension (Cradle)
H1-36
LCL-17G-25D G class (Visible, Tulip contact) - (630/1250/2000A)(Unit: mm)
Rating 630A 1250A 2000AA 6 10 20
SideFront
Top
-
H1-37
LCL-17G-25D G class (Visible, Tulip contact) - (2500A)(Unit: mm)
SideFront
Top
-
Vacuum Circuit Breaker17.5kV dimension (Cradle)
H1-38
LCL-17G-40D G class (Visible, Tulip contact) - (1250/2000A)Side
Top
(Unit: mm)
-
H1-39
LCL-17G-40D G class (Visible, Tulip contact) - (3150A)Side
Top
(Unit: mm)
-
Vacuum Circuit Breaker
H1-40
24kV dimension (VCB)
LVB-20P-13D, 16D, 25D (Visible, Fixed) - (630/1250/2000A)
LVB-20E, F-13D/(T), 16D/(T), 25D/(T) E, F class - (630/1250/2000A)
Front Side
Front Side
Note ) In case of 12.5kA & 16kA 630A, the dimension shown in parenthesis should be applied.
(Unit: mm)
-
LVB-20G-13D, 16D, 25D G class (Visible, Tulip contact) - (630/1250A)Front Side
LVB-20G-13D/T, 16D/T, 25D/T G class (Enclosed, Tulip contact) - (630/1250/2000A)Front Side
Note 1) ( ): The dimension shown in parenthesis should be applied to LVB-20G-13E/T or LVB-20G-16E/T, LVB-20G-25E/T for 630A and 1250A in case that distance between phase & phase is 210mm.
2) IP Cover applied both sides in case of 265mm phase distance.
(Unit: mm)
H1-41
-
Vacuum Circuit Breaker
H1-42
24kV dimension (Cradle)
Note) Insulation barrirer is not used for rating 12.5kA 630A and 16kA 630A
LCL-20E-13D, 16D, 25D E class (Visible, Clip contact) - (630/1250/2000A)Front Side
Top
Rating A B T630, 1250A 768 190.5 10
2000A 778 185.5 20
(Unit: mm)
-
H1-43
(Unit: mm)LCL-20E-13D/T, 16D/T, 25D/T E class (Enclosed, Tulip contact) - (630/1250/2000A)
145
97.5
972
280
15
115
660
40 40
25
20 67 47 45
42
40.5
2-14
20
4-14
20
4-14
20
947.5
1167
1120
265 265
110 400
265
400
820
ST: 260
265
404.
5
10(63
0/125
0A)
20(20
00A)
340
1033
245
40
210
210.
590
202
100
300
6.5
40
40
40
40
1250A
40
9080
2000A
8010
0
300
730960
630A
7-14
Front Side
Top
Rating A B T630, 1250A 768 190.5 10
2000A 778 185.5 20
Note) Insulation barrirer is not used for rating 12.5kA 630A and 16kA 630A
-
Vacuum Circuit Breaker24kV dimension (Cradle)
H1-44
LCL-20F-13D, 16D, 25D F class (Visible, Clip contact) - (630/1250/2000A)
Top
Front(Unit: mm)
SideRating A B T
630, 1250A 768 190.5 102000A 778 185.5 20
Note) Insulation barrirer is not used for rating 12.5kA 630A and 16kA 630A
-
H1-45
(Unit: mm)LCL-20F-13D/T, 16D/T, 25D/T F class(Enclosed, Tulip contact) - (630/1250/2000A)Front Side
Rating A B T630, 1250A 768 190.5 10
2000A 778 185.5 20
Top
Note) Insulation barrirer is not used for rating 12.5kA 630A and 16kA 630A
-
Vacuum Circuit Breaker24kV dimension (Cradle)
H1-46
LCL-20G-13D, 16D, 25D G class (Visible, Tulip contact) - (630/1250A)Front Side
Top
(Unit: mm)
-
H1-47
210mm
LCL-20G-13D/T, 16D/T, 25D/T G class (Enclosed, Tulip contact) - (630/1250/2000A)Front Side
Top
Earthing Switch
Note) ( ): The dimension shown in parenthesis should be applied to LVB-20G-13E/T or LVB-20G-16E/T, LVB-20G-25E/T for 630A and 1250A in case that distance between phase & phase is 210mm.
(Unit: mm)
-
Vacuum Circuit Breaker
H1-48
Accessories
Note) In case that position of VCBchanged to Run or Test position,a contact will be closed.
Accessories for VCB
Key lock When it is locked by a key, the closing operation is not available(electrically and mechanically) without a Key.
Button padlock Button padlock protects 'ON' or 'OFF' button when accident is occurredby operation at discretion.It is available to operate after release button padlock.
Button coverButton cover protects 'ON' of 'OFF' button when accident isoccurred by operation at discretion. It is available to operate by pushbar.
Position switch (Cell switch)Indicating the position (Run or Test) of a VCB, by mechanicallypressing the switch when a VCB change the position. - RUN: 2a- TEST: 2a
-
H1-49
Accessories
Accessories for VCBSecondary coil (Preparatory trip coil)The main coil and the preparatory coil is connected in parallel. Soeven though there happens a fault in the trip coil, the VCB can betripped by one of the two trip coils.
Latch checking switchWhen the Latch is in abnormal position, the Latch checking switchprevents the closing operation even though there is the 'Closing'signal.
Charge indicatorRemotely indicates the charging is completed. (Standard Feature) - Terminal No.: 9, 10
Position padlockThe hole to prevent the draw-in and out of a VCB from the presentposition.('Run' or 'Test') Standard option in the interlock lever of the E, F class draw-out typeVCB. (Hole size = 8)
-
Vacuum Circuit BreakerAccessories
H1-50
Accessories for CradleEarthing switch (for G class draw-out type only)For the safety during the maintenance of a VCB panel, discharge thecharging current in the load side of a VCB with this earthing switch.
Padlock of earthing switch (for G class draw-out type only)The hole to prevent the accident through carelessness earthingswitch operation, the locking of the earthing switch is available whenthe switch is in 'OFF' position. (Hole size = 8)
Position switch of the earthing switch (for G class draw-out type only)Indicates the 'ON' or 'OFF' status of the earthing switch. (5a5b)
Locking coil of earthing switch (for G class draw-out type only)To prevent the accident through carelessness earthing switchoperation, the earthing switch can be changed to 'ON' position afterreleasing the lock by magnetizing the coils.
-
H1-51
Accessories for CradleShutter padlock The hole to lock the shutters (load and line side) in close position, toincrease the safety during the maintenance of a VCB draw-outposition.(Hole size = 8)
Mechanically operated cell switch (MOC)-for G class draw-out type onlyThe auxiliary switch (3a4b), which Indicate the 'ON' or 'OFF' conditionof a VCB, but operated only when the VCB is in 'Run' state. (Installedin the bottom of a cradle)
Truck operated cell switch (TOC) -for G class draw-out type onlyThe auxiliary switch (3a4b), which indicate the 'Run' state of a VCBand is operated by the movement of a VCB frame. (Installed in thebottom of a cradle)
Code plate (Miss insertion prevention) -for E, F class draw-out type onlyTo prevent the insert a VCB to a cradle, when the ratings of VCB andcradle are different.
PadlockTo prevent the insert draw-in/out handle to a screw hole by operatingG class VCB temporarily
Note) #11, 21 are Early b contact
Note) #11, 21 are Early b contact
-
Vacuum Circuit BreakerAccessories
H1-52
Dimension
Connection diagram
Standard tool
When the control power is off, theCTD supply the power for trippinga VCB.
Capacitor trip device (CTD)
When the DC power is not available, rectify the AC power andget the DC power for closing coil.
Rectifier
Optional accessories
Manual charging handleHandle for charging the spring manually.(Standard feature)
Handle for draw-in and outHandle for draw-in and out the VCB(Standard feature in the draw-out type)
E, F class G class
Ratings SpecificationType CB-T1 CB-T2
Rated input voltage AC100/110V AC200/220VFreguency (Hz) 50/60 50/60Charging volt(V) 140/155 280/310Charging time Within 10 Sec. after the AC power offTripping time Within 30 Sec. after the AC power off
Allowable Input 85% ~ 100% 85% ~ 110%voltage range
Capacitor rating(F) 1000 560
Type AC Input voltage Output current Rating time
VCB-X 1 100/110V 40A DC 10 sec.1 200/220V
+
- ~ ~
150
80 40
29.570
100
25
Dimension
Connection diagram CDT
-
H1-53
Types and ordering information
B Position Switch (RUN/TEST:2a2a)C1 Button Padlock (ON) C2 Button Padlock (OFF)C3 Button Padlock (ON/OFF) D1 Button Cover (ON)D2 Button Cover (OFF) D3 Button Cover (ON/OFF)E
Button padlock (ON)+ Button cover (OFF)
FButton padlock (OFF)+ Button cover (ON)
G Key Lock
HSecondary Trip Coil(Preparatory trip coil)
J Fire-endurable wiring cable assyK Opening Latch Checking SwitchP1 Dummy VCB(AMP Jack)P2 Dummy VCB(Phoenix Jack)Q Earthing Truck(Lower terminal earthing)R Earthing Truck(Upper terminal earthing)S Pad Lock (G class)T Enclosed type, Tulip contact Note4)
N CTD(Capacitor Trip Device)O Rectifier
Cradle
7.2kV & 24kV
Note) 1. 12.5kA, 16kA and 25kA are available at 24kV class.2. Version E is available only at 24kV G class and its distance between phases is 210mm.3. "00" is used for ordering Earthing Truck and Dummy VCB4. Accessory only for versions D and E5. 1F,1H and 1T are only available at 24kV class
Note) 1. 12.5kA, 16kA and 25kA are available at 24kV class.2. Version E is available only at 24kV G class and its distance between phases is 210mm.3. Versions A, B and C are available only at G class VCB.
Note3)
Note2)
Note3)
Note3)
Note3)
Note5)
Note2)
LS VCB
Rated voltage06 7.2kV20 24kV
Installation methodP Fixed typeE E class draw-out typeF F class draw-out typeG G class draw-out type
M G class draw-out type+ Bushing
Revision No.D Pro-MEC
E Pro-MEC(Minimized type)
Control voltage00 -1A DC110V1B DC220V1C DC48V1E DC125V
1FAC220(M),DC110(TC)
1HAC220(M),DC220(TC)
1TAC110(M),DC110(TC)
Rated current04 400A06 630A12 1250A20 2000A30 3150A
Breaking current Note1)8 8kA13 12.5kA16 16kA20 20kA25 25kA32 31.5kA40 40kA
Auxiliary switch00 -2B 4a4b(A type connector)2E 10a10b(A type connector)2G 4a4b(B type connector)2H 10a10b(B type connector)
Accessories
Option
LS Cradle Installation methodE E class draw-out typeF F class draw-out typeG G class draw-out type
AccessoriesA MOS(3a4b)+ TOC(3a4b)B Earthing Switch
CEarthing Switch Position Switch+Earthing Switch Locking coil
T Enclosed type, Tulip contact
PS Position S/W Block(24kV E/F class only)
Revision No.A ConventionalD Pro-MEC
EPro-MEC
(Minimized type)
Breaking current Note1)8 8kA13 12.5kA16 16kA20 20kA25 25kA32 31.5kA40 40kA
Rated current04 400A06 630A12 1250A20 2000A30 3150A
Rated voltage06 7.2kV20 24kV
20 G 13 D 06 1A 2B B, C, DLVB
20 G 13 D 06 A, B, CLCL
-
Cradle
12kV
LS VCB
Rated voltage12 12kV
Installation methodG G class draw-out type
MG class draw-out type+ Bushing
Revision No.D Pro-MEC
Rated current06 630A12 1250A20 2000A30 3150A
Breaking current25 25kA32 31.5kA40 40kA
Breaking current25 25kA32 31.5kA40 40kA
Auxiliary switch2B 4a4b(A type connector)2E 10a10b(A type connector)2G 4a4b(B type connector)2H 10a10b(B type connector)
LS Cradle Installation method
GG class draw-out type
Rated current06 630A12 1250A20 2000A30 3000A
Revision No.D Pro-MEC
Rated voltage12 12kV
Control voltage1A DC110V1B DC220V1C DC48V1E DC125V
AccessoriesB Position Switch (RUN/TEST:2a2a)C1 Button Padlock (ON) C2 Button Padlock (OFF)C3 Button Padlock (ON/OFF) D1 Button Cover (ON)D2 Button Cover (OFF) D3 Button Cover (ON/OFF)E Button padlock (ON)+ Button cover (OFF)F Button padlock (OFF)+ Button cover (ON)G Key Lock H Secondary Trip Coil(Preparatory trip coil)J Fire-endurable wiring cable assyK Opening Latch Checking SwitchS Pad Lock (G class)T Enclosed type, Tulip contact
AccessoriesT Enclosed type, Tulip contact
12 G 25 D 06 1A 2B B, C1, D1LVB
12 G 25 D 06 A, B, CLCL
Vacuum Circuit BreakerTypes and ordering information
H1-54
-
H1-55
Vacuum Circuit BreakerTypes and ordering information
Cradle
17.5kV
LS Cradle
Rated voltage17 17.5kV
Installation methodP Fixed typeE E class draw-out typeF F class draw-out typeG G class draw-out type
Revision No.D Pro-MEC
Control voltage1A DC110V1B DC220V1C DC48V1E DC125V
Breaking current25 25kA40 40kA
Auxiliary switch2B 4a4b(A type connector)2E 10a10b(A type connector)2G 4a4b(B type connector)2H 10a10b(B type connector)
LS VCB
Rated voltage17 17.5kV
Note) A is for G class only
AccessoriesA MOC (3a4b) + TOC (3a4b)
B Position Switch (RUN/TEST:2a2a)C1 Button Padlock (ON) C2 Button Padlock (OFF)C3 Button Padlock (ON/OFF) D1 Button Cover (ON)D2 Button Cover (OFF) D3 Button Cover (ON/OFF)E Button padlock (ON) + Button cover (OFF)F Button padlock (OFF) + Button cover (ON)G Key Lock H Secondary Trip Coil(Preparatory trip coil)K Opening Latch Checking SwitchS Pad Lock (G class)J Fire-endurable wiring cable assy
AccessoriesRated current
06 630A12 1250A20 2000A25 2500A30 3150A
Installation methodE E class draw-out typeF F class draw-out typeG G class draw-out type
Breaking current25 25kA40 40kA
Revision No.D Pro-MEC
Rated current06 630A12 1250A20 2000A25 2500A30 3150A
17 G 25 D 06 1A 2B B, C1, D1LVB
17 G 25 D 06 A, B, CLCL
-
H1-56
Vacuum InterrupterFeatures & Ordering information
FeaturesSmall Size and Light Weight High performance, reliability, and
long life are assured.
Maintains High Vacuum High-alumina ceramics provide
superior mechanical strength and
easy degassing.
High speed interruption and shortarcing time.
The LS Vacuum Interrupter canmeet all IEC, ANSI and NEMA
performance standards.
Ordering Information
Basic type
L LSV Vacuum
Rated voltage
07 7.2kV/ 12kV
10 15kV24 24kV
Rated shortcircuit current04 4.5kA08 8kA12 12.5kA16 16kA20 20kA25 25kA31 31.5kA40 40kA50 50kA
Ampere
0 Below630A1 1250A2 2000A3 3150A
Revision No.
LV 07 08 0 A
-
H1-57
Structure
The internal components of a typical Vacuum Interrupter are shown in Figure1. LS Vacuum Interrupter consists of a ceramic insulator, two end plates, arc shield,bellows, a movable and fixed electrode, and contact set. The ambient gas pressure within the evacuated tube is approximately 10-6 torr.
Figure 1. Vacuum Interrupter Schematic
Movable Electrode
Movable End Plate
Bellows
Bellows Shield
Ceramic
Arc Shield
Contacts
End Shield
Fixed End Header
Fixed Electrode
-
H1-58
Vacuum InterrupterOperating characteristics
Current path
Driving force onthe high currentARC
ARC
Figure 2. Current flow and driving forceon arc for spiral contact
In the closed position, normal current flows throughthe interrupter. When a fault occurs and interruptionis required, the contacts are quickly separated. The arc drawn between the surfaces of contacts israpidly moved around the slotted contact surfaceby self induced magnetic effects, preventing grosscontact erosion and the formation of hot spot onthe surface. The arc burns in an ionized metal vapor, whichcondenses on the surrounding metal shield. Atcurrent zero the arc extinguishes and vaporproduction ceases. The metal vapor plasma is very rapidly dispersed,cooled, recombined, and deionized, and the metalvapor products are quickly condensed so that thecontacts withstand the transient recovery voltage.
() Weld() Bridge explosion
() Contact jets() Shield involvement
() Arc instability() Interruption
Current zero
Recoveryvoltage
Voltage Phenomena() Arc reignition() Restrikes() B. I. L() AC voltage
withstand
Arc initiationHigh current arc mode
Fault current
Time (ms) Time ()
Figure 3. AC arcing and interruption phenomena in vacuum.
-
H1-59
Ratings and Specifications
Type LV-07040A LV-07080A LV-07130A LV-07251B
Electr
ical ra
tings
Mech
anica
l data
Mech
anica
l requ
ireme
nts
Rated voltage (kV)Rated power frequency withstand voltage (kV, rms)Rated impulse withstand voltage (kV, crest)Rated frequency (Hz)Rated normal current (Amp)Rated short circuit current (Sym.) (kA)Rated short circuit making current (kA, peak)Rated duration of short-circuit (sec)Interrupter weight (kg)Moving part weight (kg)Outline dimension (mm) a
b
c
Contact stroke (mm)Opening speed, average 0 to 75% of full stroke (m/s)Overtravel during opening, Max. (mm)Closing speed, average last 33% of full stroke (m/s)Contact bounce duration, Max. (sec)Added force from atmospheric pressure (kgf)Contact force from atmospheric pressure (kgf)Contact erosion limit (mm)Mechanical life (104, Operations)
3.6 7.2 7.2 7.2 7.2
11.5 20 20 20 20
60 60 60 60
50/60 50/60 50/60 50/60
400 630 630 1,250
4.5 8 12.5 20 25
- 20.8 32.5 52 65
- 3 3 3
0.48 0.83 0.85 1.8
0.19 0.4 0.4 0.6
114 132 132 190
78 92 92 123
62 62 62 79
3 5 6 6 8
0.6 0.7~1.0 0.7~1.0 0.7~1.0
1 2 2 2
0.3 0.7~1.0 0.7~1.0 0.7~1.0
0.002 0.002 0.002 0.002
5 50 80 154 227
9 9.1 9.1 15.9
1 3 3 3
100 3 3 3
Outer view
-
H1-60
Vacuum InterrupterRatings and Specifications
Type LV-07251 LV-10252 LV-10312 LV-10403
Electr
ical ra
tings
Mech
anica
l data
Mech
anica
l requ
ireme
nts
Rated voltage (kV)Rated power frequency withstand voltage (kV, rms)Rated impulse withstand voltage (kV, crest)Rated frequency (Hz)Rated normal current (Amp)Rated short circuit current (Sym.) (kA)Rated short circuit making current (kA, peak)Rated duration of short-circuit (sec)Interrupter weight (kg)Moving part weight (kg)Outline dimension (mm) a
b
c
Contact stroke (mm)Opening speed, average 0 to 75% of full stroke (m/s)Overtravel during opening, Max. (mm)Closing speed, average last 33% of full stroke (m/s)Contact bounce duration, Max. (sec)Added force from atmospheric pressure (kgf)Contact force from atmospheric pressure (kgf)Contact erosion limit (mm)Mechanical life (104, Operations)
12 15 7.2 12 15 17.5 7.2 12 15 17.5
28 36 20 28 36 50 20 28 36 50
95 60 95 95 60 95
50/60 50/60 50/60 50/60
1,250 2,000 2,000 3,150
25 20 25/31.5 25 31.5 40
65 52 65/81.9 81.9 104
3 3 3 3
1.9 4.1 4.3 6.4
0.7 0.84 0.9 1.7
209 230 230 257(272)169 181 181 213
79 103 108 135
8 12 8 10 12 8 12
1.0~1.3 0.7~1.0 1.0~1.3 1.2~1.6 0.7~1.0 1.0 1.2
2 2 1.5 3 3 1.5
0.7~1.0 0.7~1.0 0.7~1.0 0.7~1.0
0.002 0.002 0.002 0.002
227 154 227/306 306 367
15.9 16.8 16.8 25
3 3 3 3
3 1 5 3 1 5 2
Outer view
-
H1-61
LV-24120 LV-24121A LV-24252A LV-24403 LV-12503 LV-25000
24 24 24 25.8 7.2 24 25.8 4.76 12 25.8
50 50 50 70 20 50 70 19 48 60
125 125 125 150 60 125 150 60 95 125
50/60 50/60 50/60 50/60 50/60 50/60
630 1,250 2,000 3,150 3,150 600
12.5 12.5 16 25 60 40 31.5 50 0.6
32.5 32.5 41.6 65 130 101 81.9 130 32.5
3 3 3 3 3 1
1.7 2.6 5.0 6.4 7.6 0.91
0.4 0.7 1 1.7 2.9 0.36
235 235 270 272 272 212
163 174 225 213 213 145
75 95 108 135 135 62
15 15 17 17 10 9.5
1.0~1.3 1.0~1.3 1.0~1.3 1.0~1.3 1.2~1.5 0.9~1.1
2 2 1.5 1.5 3 1.5
0.7~1.0 0.7~1.0 0.7~1.0 1.0~1.3 0.7~1.0 0.76
0.002 0.002 0.002 0.002 0.002 1.002
80 80 120 227 420 367 306 380 57
9.1 15.9 16.8 25 25 9.1
3 3 3 3 2 2.54
1 1 1 1 2 1
1) 1) 1)
1) Only with additional external insulation
-
H1-62
Vacuum InterrupterDimensions
LV-07040A LV-07080/LV-07130A LV-07251
LV-07251B LV-10252/LV-10312 LV-10403
Note) LV-10312 108
Note)
-
H1-63
LV-12503
49.5
LV-24120 LV-24121A
LV-24252A LV-24403 LV-25000
-
Contents
Features and Structure H2-2Control circuit diagram H2-4Dimensions H2-5
Vacuum Circuit Breaker for MCSG
Pro-MEC MCSG VCB
H2
-
H2-2
Vacuum Circuit Breaker for MCSGFeatures and Structure
FeaturesModule type VCBConvenient especially for fabricating MCSG
- Housing is designed like VCB compartment style- MCSG panel can be easily constructed if combined with Low voltage compartment, Busbar
compartment and Cable compartment.
Convenient for maintenance and offering high safely- Earthing switch can be operated from outside of the panel, and which makes earthing of 3 phases at the
same time.- Without opening the compartment panel door, breaker can be drawn in or out electrically or manually
Main functions- Breaker : draw- in or out electrically or manually- Compartment : 3-positions
Standard- IEC 62271-100
Name plate Manual closing button Keylock Manual trip button Manual charging hole Contact position
indicator Closing spring
charge indicator Operation counter Insertion &
Draw-out screw Geared Mechanism
Compartment Earthing switch Bushings Shutter
Electricaldrive unit
-
H2-33
Ratings
Rated voltage (kV) 25.8Rated normal current (A) 630 2000Rated frequency (Hz) 60Rated short-circuit breaking current (kA) 25Rated short-circuit breaking capacity (MVA) 1100Rated short-time withstand current (kA) 25/3sRated short-circuit making current (kA) 65Rated breaking time (Cycles) 3Withstand Power frequency (kV) 50/1minvoltage Impulse (kV/1.250 ) 125TRV rising rate (kV/ ) 0.47TRV max. (kV) 41Rated operating sequence O-0.3s-CO-3min-COMechanical lifetime 10,000operationsElectrical lifetime 10,000operationsRated control voltage (V) DC 110VRated trip voltage( V) DC 110VStandard auxiliary switch 4a4b, 8a8bRated opening time (s) 0.04No-load closing time (s) 0.06Rated charging motor current (A) 7Rated closing coil current (A) 5Rated trip coil current (A) 5Closing spring charging time (s) 12Draw-in/out motor voltage (V) DC 110VDraw-in/out motor current (A) 5Distance between phases (mm) 265Weight (kg) breaker 205 236.5
compartment 281 293Installing GApplied standard IEC 62271-100
LVB25-25/06 LVB25-25/20Type
Rated voltage25 25.8kV
Installation methodG Gclass draw-out
Auxiliary switch2G 4a4b(B type connector)2H 8a8b(B type connector)
Breaker
25 G 25 I 06 1A 2B B,C,DLVB
CCrraaddllee((CCoommppaarrttmmeenntt))
LS VCB
Breaking current25 25kA
Version
Rated current06 630A20 2000A
AccessoriesB Position SwitchC1 Button Padlock(ON) C2 Button Padlock(OFF)C3 Button Padlock(ON/OFF) D1 Button Cover(ON)D2 Button Cover(OFF) D3 Button Cover(ON/OFF)E Button Padlock(ON)+Button Cover(OFF)F Button Padlock(OFF)+Button Cover(ON)G Key Lock H Secondary Trip Coil
Rated voltage25 25.8kV
LS VCB
25 C 13 D 06 A,B,CLCL
Version Rated current06 630A20 2000A
Breaking current25 25kA
Installation methodC Bushing
AccessoriesB Earthing SwitchE Door
Control voltage1A DC110V1B DC220V1C DC48V1E DC125V1F AC220(M), DC110(TC)1H AC220(M), DC220(TC)1T AC110(M), DC110(TC)
-
H2-4
Vacuum Circuit Breaker for MCSGControl circuit diagram
MOTOR POWER SOURCE
A1 A2
P NN
N
M
CA3 A4CS
TRIP POWER SOURCE
CLOSING POWER SOURCE
A5 A6CS
CW ()
CCW
()
PP
PAu
xilia
ry s
witc
h
Posi
tion
S/W
Indi
catio
n fo
r clo
sing
spr
ing
"cha
rged
" is
avai
labl
e.
913
14 4389
X44
1LS
62
3452
b35
3389
Y34
3389
X34
652
a
6'
4389
Y89
X89
Y44
2189
Y22
1516
1722
2426
2840
4244
46
2325
2729
4143
4547
2325
2729
4143
4547
3638
5052
5456
5870
13
1PS
1PS
23
24
24
3638
5052
5456
5870
3739
5153
5557
5971
3739
5153
5557
5971
2224
2628
4042
4446
13 14
13 14
10
1D C B A
D C B A
23
41
23
4
5051
5253
5
1314
1516
17
67
89
109
1011
1213
1415
16
3637
3839
12
34
56
A1A2
A3A4
A5A6
78
910
1112
1314
2223 ( 4
a 4b )
( 8a 8
b )SE
COND
ARY
DISC
ONN
ECT
WIR
ING
( TOP
VIE
W )
2425
2627
2829
1516
1D C B A
D C B A
23
41
23
4
5051
5253
5
1314
1516
17
67
89
109
1011
12
5455
5657
5859
70
4243
4445
4647
71
1314
1516
3637
3839
4041
12
34
56
A1A2
A3A4
A5A6
78
910
1112
1314
2223
2425
2627
2829
1516
4 5Yb
Ya
52b
LS1
63 4
7 8
343
64
2121 1 5 1 230 31
LS2
LS3
TC1 2
89X
8 9
1LS
52 21
89X
22 89Y8 9
89M
4a4b
8a8b
1 2
Y
Run
Test
: E
xtern
al te
rmina
l of V
CB52
: Vac
uum
circ
uit b
reak
erM
: Spr
ing ch
argin
g moto
rTC
: Trip
coil
TC1
: Sec
onda
ry trip
coil
C: C
losing
coil
Y: A
nti-p
ump r
elay
52a
: Aux
iliary
switc
h (N
O)52
b: A
uxilia
ry sw
itch
(NC)
LS1
: Clos
ing in
terloc
k lim
it swi
tch(on
ly withd
rawab
le typ
e)LS
2: M
otor
stop
ping,
closin
g spr
ing ch
arge
d ind
icatio
nLS
3: A
nti-c
losing
, Anti
-pum
ping l
imit s
witch
LS5
: "Of
f" at
Test
Posit
ionLS
6: "
Off"
at Ru
n Pos
ition
PS1 :
Pos
ition S
/W("O
n" at
Test P
ositio
n)PS
2 : P
ositio
n S/W
("On"
at Ru
n Pos
ition)
89X
: Aux
iliary
Rela
y for
Inse
rting
89Y
: Aux
iliary
Rela
y for
with
draw
ing89
M : M
otor
for w
ithdr
awing
and I
nser
ting
Note.
Diag
ram sh
ows t
he ci
rcuit b
reake
r in po
sition
OFF
with
clos
ing sp
ring
Charg
ed
-
H2-5
Dimensions10
82
1365
7010
375
A
A
35
53 538941000
15.4
265 265
(183.4
)
(212.4
)
963553 1
95
652.
4
183.
4
1365
340
372.
6
26.8
st:31010
263.8180Lead wire(2m)
293.8
410
B B
C
1
TEST RUN
Earthing
45
3086
3060
60
8634
0
45 95
9681000
425
425
190
265 265175
425
2-13
(Earthing)6.5
3-10
5012
8
844
700
265
205
600
50
20
41065
513 16.8370 40
340 40 483963
50
950 1
7510
3
15 933 (15)
700
3-11(Mounting Hole)
3-1122(Mounting Hole)
20-M8 POP NUT(DP:18)
User Bus
Cradle(Compartment) - w/o Earthing Switch
630A
2000A
265 265
860 350 50
445
445
481785
886912
1013
340
340
608
G type breaker + track(electric draw-in/out)
RearFront
Top
-
H2-6
Vacuum Circuit Breaker for MCSGDimensions
2525
600
1717
8383
340
2626
20
340 40 483 50 70
700
950
50
100 100763
140 150
1565 19
9-11Mounting Hole
50
370 40 16.8513
20-M8 POP NUT(DP:18)
2-1360
60
26
26
A
(Door)**Option
1750
125
500
500
767.
424
434
039
8.6
4541
5
190
454
415
415
415
45
500
125
A
Test B
1000 39 963 320.935
16-10(Mounting Hole Side) 10-M8 POP NUT(DP:18)
25t(2000A)10t(630/1250A)
st:310
M12 TAP(DP:24)
3-10
(Earthing)6.5
35
74
36
User Bus
968
265 265
265 265175
(Earthing S/W)**Option
35
Test Run
Test
238.8
Cradle(Compartment) - w/ Earthing Switch
Side RearFront
Top
-
Contents
Ratings H3-4Ratings of Accessories H3-5Accessories H3-6Control circuit diagram H3-8Dimensions H3-9Types and ordering information H3-14
Vacuum Circuit Breaker for Power Plants
Power Plants VCB
H3
-
A product developed for water and thermal power plants dueto the revision and application of Kepcos standard (ES150)followed by the IEC standard revision. It has completed thehigh capacity (40~50kA) VCB series for power plants bysecuring higher breaking capacity, safety and reliability.
VCB Full OptionTo prevent fatal error, property and life loss caused from operator duringoperation, it is equipped with safety mechanisms such as shutter padlock.
Bushing applied for Window CT adaptation The bushing provides sufficient strength to collaborate with the internal insulation and isadaptable with CT offering safety mechanically and electrically when applying large current.
H3-2
Power PlantsVacuum Circuit BreakerVacuum Circuit Breaker
-
Vacuum Circuit Breakersfor Power Plants
It is recognized for reliability by acquiring newIEC 62271-100 and ES150 (KEPCO standardspecification on AC breakers)
H3-3
-
Vacuum Circuit Breaker for Power PlantsRatings
H3-4
Type LVB-06G-40H LVB-06G-40J LVB-06G-50J
Rated voltage (kV) 7.2Rated normal current (A) 1200 2000 3000 1250 2000 2500 3150 1250 2000 3150Rated frequency (Hz) 60Rated short-circuit breaking current (kA) 40 50Rated short-circuit breaking capacity (MVA) 500 624Rated short-time withstand current (kA/3sec) 40 50Rated short-circuit making current (kAp) 104 130Rated breaking time (Cycle) 3Rated opening time (sec) 0.04No-load closing time (sec) 0.06Withstand Power frequency (kV/min) 20voltage Impulse (kV/1.250 ) 60Rated operating sequence CO-15s-CO O-0.3s-CO-3min-CO
Rated charging motor current (A) 5 (at DC125V) 5 (at DC110V)Rated closing coil current (A) 3 (at DC125V) 3 (at DC110V)Rated shunt coil current (A) 3 (at DC125V) 3 (at DC110V)Type Mechanical M2
test Electrical E2 (Maintenance free) E2 (List1)Capacitive current switching C2
Lifetime Mechanical Without maintenance 10000 operations
Maintenance 20000 operations
Electrical Without maintenance 10000 operations
Maintenance 20000 operations
Auxiliary switch 3a3b
Installing Draw-out G-type Visible, Tulip
Weight Breaker G-type (kg) 200 260 200 260 200 260Cradle G-type (kg) 190 230 190 230 190 230
Applied standard ES150 NOTE) IEC 62271-100
Type test laboratory KERI
Note) ES150: KEPCO's standard in which IEC62271-100 is appliedKERI: Korea Electrotechnology Research Institute
-
H3-5
Ratings and auxiliary devices
Note) * applied in the VCB of which MOC is operable at the TEST position.
Switch Mechanism MOC TOC
Breaker a b a b a b
CLOSE ON OFF ON OFF ON OFFRUN
OPEN OFF ON OFF ON OFF ON
CLOSE ON OFF ON * OFF * ON OFFTEST
OPEN OFF ON OFF * ON * OFF ON
Position of the Auxiliary switch
Motor
Closing Coil (C)When the rated volt is applied to the coil the breaker is closed.The electrical anti-pumping circuit is built-in it.
Note) Range of the normal operating voltage: 75~125% of rated voltage
Shunt coil (TC)When the rated volt is applied to the coil the breaker is opened.
Note) Range of the normal operating voltage: 60~125% of rated voltage
Auxiliary switchStandard configuration : 3a3b1b of early-b contact function exists inside
Charge indicator ofthe closing springIndicating the condition of the closing spring.
Position indicator of the main contactsIndicating the 'Close' or the 'Open' of the main contacts.Close position: ON Open position: OFF
CounterMechanically counts the operation of the VCB by 5digits
Charged Discharged
Close position Open position
When the closing spring is charged, the control power of motor is turned off by the built-in limit s/w.
Note) Range of the normal operating voltage: 85~110% of rated voltage
Note) The contact ratings of Mechanical Operated Cell Switch(MOC)are the same with that of the Aux. switch.
The peak value of the Consumption Charging timeRated voltageinrush current (A) Rated current (A) power (W) (Sec.)
DC 110V 20 3 330 12DC 125V 20 3 330 12
Classification Resistive Inductive Contact load (A) load (A) configuration
Contact Ratings DC110V 10 5
3a3b125V 10 5
Rated voltage Rated current (A)
DC 110V 3DC 125V 3
Rated voltage Rated current (A)
DC 110V 3DC 125V 3
Classification Resistive Inductive Contact load (A) load (A) configuration
Contact Ratings DC110V 10 5
3a3b125V 10 5
Truck Operated Cell Switch(TOC)
-
Vacuum Circuit Breaker for Power PlantsAccessories
H3-6
Accessories for breakers
Position padlockIt is located at the screw hole to prevent the draw-in and out of a breakerfrom the present position(Disconnected, Test or Connected)
Mechanical position indicatorIt is located in the lower part of a breaker to check the present position -Disconnected, Test or Connected- easily.
Position interlockThe breaker is locked in each position-Disconnected, Test or Connected,thus it is necessory to release the lock before draw-in or out of a breakerfrom the present position.
Auto connectionWhen the breaker is moved to Test position from Disconnected positionthe connector for control powers is automatically connected. In case ofreverse moving of the breaker the connector is automaticallydisconnected.
Code plateWhen the breaker is inserted to the cradle, if the ratings does not matchwith the cradle, it mechanically prevents the breaker from being insertedinto the cradle.
-
H3-7
Mechanically operated cell switch (MOC)It is auxiliary switch (6a6b), which indicates the 'ON' or 'OFF' condition of aVCB, and operated when the VCB is in 'Run' state.
Truck operated cell switch (TOC)It is auxiliary switch (6a6b), which indicates the 'Run' state of a VCB and isoperated by the movement of a VCB frame.
Accessories for breakers
-
Vacuum Circuit Breaker for Power PlantsControl circuit diagram
H3-8
NA2
A4N
A6
MOTOR POWER SOURCE
M
A1
P
8
A3CS
TRIP POWER SOURCE
CLOSING POWER SOURCE
TC
52a
A5CS
P
N
3a
2322
2524Aux
iliar
y sw
itch
P
Y
2422
54
2523
5559
58 59
58
2726
272654 55
57
56 57
56
3 44 6
1 26 77
C3130511 2 1 2
Ya
Yb 52b
LS1
LS3 3 4
5 6
Early
b
235756
A2 22A1
2725
59585554
B
A4A6 26
24
A5A3 A
17
(FRON
T VI
EW O
F RE
CEPT
ACLE
PLU
G)
2425
SECO
NDAR
Y D
ISCO
NNEC
T W
IRIN
G5
34
21A1
A3
A2A4
22A5
23A6
1314
1615
1211
89
76
10
22
5455
26271819
2120
5658
5759
2324
(12P T
AP P
LUG)
LS2 43
LS4
21
3b
Cell
switc
h in
ser
vice
pos
ition
3130
3534
3736
3938
5150
76
2322
2524
2726
2928
2515
2616
2717
2212
2313
2414
5352 4140
2515
2616
2717
2212
2313
2414A B
Note)
Diag
ram sh
ows th
e circu
it brea
ker in
positi
onOF
Fw
ith cl
osing
sprin
gCh
arged
: E
xterna
l terminal o
f VCB
52: V
acuu
m c
ircuit b
reak
erM
: Spr
ing
charging
motor
TC: T
rip c
oil
C: C
losing
coil
Y: A
nti-pu
mp
relay
52a
: Aux
iliary switc
h (N
O)
52b
: Aux
iliary switc
h (N
C)LS
1: C
losing
interlo
ck limit sw
itch
LS2
: Motor stopp
ing
LS3
: Anti-clos
ing, A
nti-pu
mping
limit sw
itch
LS4
: Motor C
harg
ing
interlo
ck limit sw
itch
-
H3-9
Dimensions - Breakers
LVB-06G-40H, 40J G class (Visible, Tulip contact)-(1200, 1250, 2000A) (unit : mm)
336
717
745
685.
2
58453
2
686.2
60
10
368.
236
0
722
254254
130
351.
3
815.
2
696
1200/1250/2000A
54(m
ale
cond
ucto
r)SideFront
Top
-
Vacuum Circuit Breaker for Power PlantsDimensions - Breakers
H3-10
LVB-06G-40H, 40J G class (Visible, Tulip contact)-(2500, 3000, 3150A) (unit : mm)
60
10
686.2
336
130
349.
8
815.
2
360
368.
2
254254
722
685.
2
58453
2
745
717
696
2500/3000/3150A
Heat sink(only for 3150A)
79(m
ale
cond
ucto
r)SideFront
Top
-
H3-11
LVB-06G-50J G class (Visible, Tulip contact)-(1250, 2000A) (unit : mm)
336
717
745
58453
2
677.2
60
10
368.
236
0
722
254254
130
815.
7
696
Fixed contact
115.5 140
403.
8
341.
3
Moving contact
54(m
ale
cond
ucto
r )
676.
2
SideFront
Top
-
Vacuum Circuit Breaker for Power PlantsDimensions - Breakers
H3-12
LVB-06G-50J G class (Visible, Tulip contact)-(3150A) (unit : mm)
254 254
815.
7
722
115.5 140
267.
813
6.5
336
360
358.
710
150.
2
445.8
541
677.2
58453
2 676.
2Moving contact Fixed contact
79(m
ale
cond
ucto
r)
696
717
130
341.
8
107
SideFront
Top
-
H3-13
252
252
37450 24035
374
235.5
150 500 361
Autocon(3a3b)M.O.C(6a6b)
1134
436.5544
338
1038.5T.O.C(6a6b)
644
24035
310
816
776
254
254
360
449.
5
75.815
1.5
59 61(
)10
35
61
175
103.
5
310
79
54
14
8 14(Earthing)
Mounting 6-12
14
8
21
8
218
5036
140 123
140 123
4-M12 DP20
2-M12 DP20
2500/3000/3150A
1200/1250/2000A
Cradles (unit : mm)
-
Vacuum Circuit Breaker for Power PlantsTypes and ordering information
H3-14
OptionMOC(6a6b)+TOC(6a6b)
A1 MOC active only at RUN positionMOC(6a6b)+TOC(6a6b)
A2 MOC active only at TEST and RUN position
Note) 1.Rated current 2500A is available only at 7.2kV 40kA, IEC version(J)2.Control voltage and Auxiliary switch are not applied to Dummy VCB and Earthing Truck
LS VCB
Cradle
Breaker
LCL 06 G 40 J 12
LS Cradle
Rated voltage
06 7.2kV
Installation method
G G class draw-out
Breaking current40 40kV
50 50kV
Rated current
12 1200/1250A20 2000A
25 2500A
30 3000/3150A
A1, A2
Rated voltage06 7.2kV
Installation methodG G class draw-out
Breaking current40 40kA
50 50kA
StandardH ESB150J IEC
Control voltage1A DC110V 1B DC220V1E DC125V
Auxiliary switch2L 3a3b(Autocon)
OptionC1 Button padlock(ON) C2 Button padlock(OFF) C3 Button padlock(ON/OFF) D1 Button Cover(ON) D2 Button Cover(OFF) D3 Button Cover(ON/OFF)
EButton padlock(ON)+Button cover(OFF)
FButton padlock(OFF)+Button cover(ON)
G Key Lock P3 Dummy VCB Q Earthing Truck(lower terminal)R Earthing Truck(upper terminal)
LVB G 40 J 12 1A 2L P3,Q,R06
standardH ESB150J IEC
Rated current
12 1200/1250A 20 2000A 25 2500A 30 3000/3150A
NOTE1)
NOTE2)
-
Contents
H4
Nuclear Power Plants VCB
Ratings H4-4Ratings of Accessories H4-5Accessories H4-6Control circuit diagram H4-8Dimensions H4-9Types and ordering information H4-11
Vacuum Circuit Breaker for Nuclear Power Plants
-
H4-2
It was developed for KEPCO nuclear power stations. This breakersatisfies quality, safety measures (secure from earthquake andother environments), and surge protection class complies with1E-CLASS provisions. It is featured with high breakingtechnologies, safety, and reliability by applying our own vacuuminterrupters (50KA) approved by ANSI standard tests.
Nuclear Power PlantsVacuum Circuit BreakerVacuum Circuit Breaker
-
VCB Full OptionTo prevent fatal error, property andlife loss caused from operatorduring operation, it is equippedwith safety mechanisms such asshutter padlock.
Bushing applied forWindow CT adaptationThe bushing provides sufficientstrength to collaborate with theinternal insulation and is adaptablewith CT offering safety mechanicallyand electrically when applyinglarge current.
Satisfies earthquake andother internal environmentspecifications During the lifespan of power stations (40yrs),it is designed to operate its fundamentalbreaking functions even under the mostsevere conditions like earthquake, which iscritical from safety perspectives. Thesetechnologies proven through tests thatcomply with KEPIC standard and relevantspecifications are to guarantee nuclearreactor safety.
H4-3
Vacuum Circuit Breakersfor Nuclear Power Plants
-
Vacuum Circuit Breaker for Nuclear Power PlantsRatings
H4-4
Type LVB-05G-50B LVB-15G-40B
Rated voltage (kV) 4.76 15
1200 1200
Rated normal current (A) 2000 2000
3000 -
Rated frequency (Hz) 60 60
Rated short-circuit breaking current (kA) 50 40
Rated short-circuit breaking capacity (MVA) 410 1040
Rated short-time withstand current (kA/3sec) 50 40
Rated short-circuit making current (kA) 130 104
Rated breaking time (Cycle) 3 3
Rated opening time (sec) 0.04 0.04
No-load closing time (sec) 0.06 0.06
Withstand Power frequency (kV/1min) 19 36
voltage Impulse (kV/1.250 ) 60 95
Rated operating sequence 0-0.3s-CO-3min-CO
Rated charging motor current DC 125V (A) 5 5
Rated closing coil current DC 125V (A) 3 3
Rated shunt coil current DC 125V (A) 3 3
LifetimeMechanical(w/o maintenance) 10000 operations 10000
Electrical(w/o maintenance) 10000 operations 10000
Auxiliary switch 5a3b 5a3b
Installing G-type G-type
Weight1200,2000A (kg) 300 300
3000A (kg) 350 -
Applied standard ANSI C37 ANSI C37
Type test laboratory KERI KERI
-
H4-5
Ratings of Accessories
Note) The contact ratings of Mechanical Operated Cell Switch(MOC)are the same with that of the Aux. switch.
MotorWhen the closing spring is charged, the control power of motor is turned off by the built-in limit s/w.
The peak value of Ratedcurrent(A)Rated voltage
the inrush current (A) Range of the normal Consumption Charging time4.76kV 15kV 4.76kV 15kV operating voltage power (W) (sec)50kA 40kA 50kA 40kA
DC 125V 15 15 5 5 90~140 360 8
Closing Coil (C)When the rated volt is applied to the coil the breaker is closed.The electrical anti-pumping circuit is built-in it.
The peak value of
Rated voltagethe inrush current (A)
Range of the normal4.76kV 15kV operating voltage
50kA 40kA
DC 125V 3 3 90 ~ 140
The peak value of
Rated voltagethe inrush current (A)
Range of the normal4.76kV 15kV operating voltage
50kA 40kA
DC 125V 3 3 70 ~ 140
Auxiliary switchStandard configuration : Reversible 8C(5a3b)and 2c(2b) with early-b contact function
CounterMechanically counts the operation of the VCB by 5digits
Shunt Coil (TC)When the rated volt is applied to the coil the breaker isopened.
Switch Mechanism MOC TOC
Breaker a b a b a b
CLOSE ON OFF ON OFF ON OFFRUN
OPEN OFF ON OFF ON OFF ON
CLOSE ON OFF ON OFF ON OFFTEST
OPEN OFF ON OFF ON OFF ON
Position of the Auxiliary switch
Classification Resistive Inductive Contactload(A) load(A) configuration
AC250V 10 5
125V 10 5
Contact Ratings 250V 10 5 8c
DC 125V 10 5
30V 10 5
Charge indicator ofthe closing springIndicating the condition of the closing spring.
Position indicator of the main contactsIndicating the 'Close' or the 'Open' of the main contacts.Close position: ON Open position: OFF
Charged Discharged
Close position Open position
-
Vacuum Circuit Breaker for Nuclear Power PlantsAccessories
H4-6
Position padlockIt is located at the screw hole to prevent the draw-in and out of a breakerfrom the present position(Disconnected, Test or Connected)
Mechanical position indicatorIt is located in the lower part of a breaker to check the present position -Disconnected, Test or Connected- easily.
Auto connectionWhen the breaker is moved to Test position from Disconnected position theconnector for control powers is automatically connected.In case of reverse moving of the breaker the connector is automaticallydisconnected.
Reversible contact10 auxiliary switches are provided. 8 of them consist of reversible 8c whichcan be changed from a(b) to b(a). Factory composition is 5a3b. And theother 2 switches are supplied as 2b with early-b contact function
Code plateWhen the breaker is inserted to the cradle, if the ratings does not matchwith the cradle, it mechanically prevents the breaker from being insertedinto the cradle.
Auto dischargeIn case the breaker is drawn-out when the closing spring is charged in theposition-Disconnected, Test or Connected, or the breaker is moved toDisconnected position from Test position the closing spring shall beautomatically released.
Accessories for breakers
-
H4-7
Mechanically operated cell switch (MOC)This 6a6b switch indicates the 'ON' or 'OFF' condition of a VCB and isoperated in the positions of 'Run' and 'Test"..
Truck operated cell switch (TOC)This 6a6b switch indicates the 'Run' state of a VCB and is operated by themovement of a VCB frame.
Accessories for cradles
-
Vacuum Circuit Breaker for Nuclear Power PlantsControl circuit diagram
H4-8
P NN
N
PP
22 22
LS2
MOTOR POWER SOUREC
CLOSING POWER SOURCE
TRIP POWER SOURCE
3 4
1 1 5 30 313 4
7
6 6 1 2
81 22
3 4
4 6
5 6
LS3 L
S1
Ya
Yb 52b
52a
3524
3726
3928
5140
5343
5445
5647
58
2334
2536
2738
2950
41
2325
2729
41
5242
5544
5746
59
5557
59
2426
2840
5456
58
Auxil
iary s
witch
early
b
5a3b
A1
M
CY
TC
A2A4
A6
A3A5
CSCS
SECO
NDAR
Y DI
SCON
NECT
W
IRIN
G(FR
ONT V
IEW
OF
RECE
PTAC
LE P
LUG)
13 1A2 A1A3
A522
2426
2840
5456
58
A4A6
2325
2729
4155
5759
23
45
67
89
1011
12
1415
1617
1819
2021
2223
24
: E
xterna
l terminal o
f VCB
52 :
Vacu
um c
ircuit b
reak
erM :
Sprin
g ch
arging
motor
TC :
Trip c
oil
C : C
losing
coil
Y : A
nti-pu
mp
relay
52a
: Aux
iliary switc
h (N
O)
52b
: Aux
iliary switc
h (N
C)LS
1 : C
losing
interlo
ck limit sw
itch
(only
with
draw
able ty
pe)
LS2
: Motor stopp
ing, c
losing
spr
ing
charge
d indica
tion
LS3
: Anti-clos
ing, A
nti-pu
mping
limit sw
itch
Note)
Diag
ram sh
ows th
e circu
it brea
ker in
positi
onOF
Fw
ith cl
osing
sprin
gCh
arged
-
H4-9
Dimensions
1200/2000A
3000A
722
254 254
722745
109 228 109 228
817
109.5 442.586.5
713
369
360
360
816
Breaker
-
Vacuum Circuit Breaker for Nuclear Power PlantsDimensions
H4-10
936
254 254
644850
343 137
100
1070
360
449
157
195 630
1020
252213
50
310
203
36
4-M12 DP18
2-M12 DP24
2-M12 DP24
1200/2000A
3000A
Cradle
-
H4-11
Types and ordering information
Breaker
LVB 05 G 40 B 20 1A 2K
LS VCB
Rated voltage05 4.76kV
15 15kV
Installation method
G G class draw-outVersion
B Pro-MEC
Control voltage1A DC110V1B DC220V1C DC48V1E DC125V
1
Nuclear class
1 1E class
2 Non 1E class
Nuclear class
1 1E class
2 Non 1E class
Breaking current40 40kA
50 50kA
Rated current
12 1200A
20 2000A
30 3000A
Auxiliary switch
2K 8c
Cradle
LCL 05 G 40 B 20 1
LS Cradle Installation method
G G class draw-out
Rated current
12 1200A
20 2000A
30 3000A
Rated voltage05 4.76kV
15 15kV
Breaking current40 40kA
50 50kA
Version
B Pro-MEC
Note) 1A,1B,1C are only availableat 15kV class
Note)
-
H4-12
Memo
-
For your safety, please read user's manual thoroughly before operating.Contact the nearest authorized service facility for examination, repair, or adjustment.Please contact qualified service technician when you need maintenance.
Do not disassemble or repair by yourself!Any maintenance and inspection shall be performed by the personnel having expertise concerned.Safety Instructions
LS Industrial Systems (Middle East) FZE Dubai, U.A.E. Address: LOB 19 JAFZA VIEW TOWER Room 205, Jebel Ali Freezone P.O. Box 114216, Dubai, United Arab Emirates Tel: 971-4-886 5360 Fax: 971-4-886-5361 e-mail: [email protected] LS Industrial Systems Co., Ltd. Dalian, China
Address: No.15, Liaohexi 3-Road, Economic and Technical Development zone, Dalian 116600, ChinaTel: 86-411-8273-7777 Fax: 86-411-8730-7560 e-mail: [email protected] Industrial Systems (Wuxi) Co., Ltd. Wuxi, China
Address: 102-A , National High & New Tech Industrial Development Area, Wuxi, Jiangsu, 214028, P.R.ChinaTel: 86-510-8534-6666 Fax: 86-510-522-4078 e-mail: [email protected] Industrial Systems Co., Ltd. Hanoi, Vietnam
Address: Nguyen Khe - Dong Anh - Ha Noi - Viet NamTel: 84-4-882-0222 Fax: 84-4-882-0220 e-mail: [email protected] Industrial Systems Co., Ltd. Hochiminh , Vietnam
Address: 41 Nguyen Thi Minh Khai Str. Yoco Bldg 4th Floor, Hochiminh City, VietnamTel: 84-8-3822-7941 Fax: 84-8-3822-7942 e-mail: [email protected] Industrial Systems Tokyo Office Tokyo, Japan
Address: 16FL, Higashi-Kan, Akasaka Twin Tower 17-22, 2-chome, Akasaka, Minato-ku Tokyo 107-8470, JapanTel: 81-3-3582-9128 Fax: 81-3-3582-2667 e-mail: [email protected] LS Industrial Systems Shanghai Office Shanghai, China
Address: Room E-G, 12th Floor Huamin Empire Plaza, No.726, West Yan'an Road Shanghai 200050, P.R. ChinaTel: 86-21-5237-9977 (609) Fax: 89-21-5237-7191 e-mail: [email protected] Industrial Systems Beijing Office Beijing, China
Address: B-Tower 17FL.Beijing Global Trade Center B/D. No.36, BeiSanHuanDong-Lu, DongCheng-District,Beijing 100013, P.R. ChinaTel: 86-10-5825-6025,7 Fax: 86-10-5825-6026 e-mail: [email protected] Industrial Systems Guangzhou Office Guangzhou, China
Address: Room 1403,14F,New Poly Tower,2 Zhongshan Liu Road,Guangzhou, P.R. ChinaTel: 86-20-8326-6764 Fax: 86-20-8326-6287 e-mail: [email protected] Industrial Systems Chengdu Office Chengdu, China
Address: 12Floor, Guodong Building, No52 Jindun Road Chengdu, 610041, P.R. ChinaTel: 86-28-8612-9151 Fax: 86-28-8612-9236 e-mail: [email protected] Industrial Systems Qingdao Office Qingdao, China
Address: 7B40,Haixin Guangchang Shenye Building B, No.9, Shandong Road Qingdao 26600, P.R. ChinaTel: 86-532-8501-6568 Fax: 86-532-583-3793 e-mail: [email protected]
HEAD OFFICELS Tower 1026-6, Hogye-dong, Dongan-gu, Anyang-si, Gyeonggi-do 431-848, KoreaTel. (82-2)2034-4870Fax. (82-2)2034-4713
CHEONG-JU PLANTCheong-Ju Plant #1, Song Jung Dong, Hung Duk Ku,Cheong Ju, 361-720, Korea
Global Network
www.lsis.biz
Specifications in this catalog are subject to change without notice due to continuous product development and improvement.
2009. 02 Vacuum Circuit Breakers/Vacuum Interrupter(E) 2008. 11/(02) 2009. 02 Printed in Korea STAFF
2008.11 LS Industrial Systems Co.,Ltd. All rights reserved.