Catterick Tel: 01748 832800 Huddersfield Tel: 01484 539699 ... · Unique frame design ensuring...
Transcript of Catterick Tel: 01748 832800 Huddersfield Tel: 01484 539699 ... · Unique frame design ensuring...
www.chippindaleplant.com
Leeds Tel: 0113 263 2344Catterick Tel: 01748 832800
Huddersfield Tel: 01484 539699Keighley Tel: 01535 606135
Manchester Tel: 0161 406 0666Newcastle Tel: 0191 274 4441Sheffield Tel: 01909 568855
York Tel: 01904 636977 ATTACHMENTS BROCHURE
www.chippindaleplant.com
ABOUT US CONTENTS
PAGE 3 PAGE 4
We’re a constantly evolving business, every day we improve and with 70 years of experience under our belt we know we can exceed your expectations!
Here at Chippindale Plant, we provide the complete hire & sales service for plant, tools, attachments and site accommodation throughout the entire North of England and beyond. We take real pride in our exceptional service and maintaining our state of the art hire fleet to the highest standards.
EXCAVATOR ATTACHMENTS
5 Breakers 7 Compactor Plates9 Sheet Pile Drivers11 Rotational Grapples13 Fixed Pulverisers15 Multi Processors17 Clam Shell Bucket19 Bucket Crushers21 Screening Buckets23 Augers25 Post Drivers26 Riddle Buckets27 Land Rakes28 Ripper Teeth29 Round Pile Croppers30 The ‘Cruncher’ Pile Cropper31 Square Pile Croppers32 Tilting Buckets33 Pallet Forks34 ‘V’ Buckets
35 Awards & Accreditations 36 Contact Us 37 Depot Locations41 HAE HireGuard Insurance44 Notes48 Other Services
OTHER
• We have a huge availability of attachments and head brackets to fit almost any excavator
• Industry leading equipment selected for its reliability, performance and outstanding productivity.
• Highly trained engineers who will fit and test equipment for optimum performance before leaving your site.
• A specialist attachment team with years of experience to support you.
• Large fleet of fully equipped service vans for rapid response in the event of a breakdown.
• We can offer full repair and maintenance services from our manufacturer approved workshops. All repairs are fully tested and checked before being returned to the customer.
We are also a main dealer for Bomag, Atlas Copco, Epiroc Volvo, Mecalac, Stihl, Viking and Belle Group.
Our Plant, Tools and Site Accommodation divisions are also available for all your other hire requirements, just ask!
COMPANY PROFILE
WHY CHOOSE CHIPPINDALE’S
BREAKERS
PAGE 5 PAGE 6
Epiroc transformed the construction and mining industries with these efficient and highly adapatable breakers. Combining superior efficiency and performance with high durability and a low impact on the environment.
▶ Available for excavators from 0.5 to 46 tonnes ▶ Low noise & vibration ▶ Suitable for a wide range of carriers ▶ High productivity in the toughest working environments ▶ Very easy to setup and use ▶ Epiroc is part of the Atlas Copco group
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20t
SB52
SB102
SB152
SB202
SB302
SB702
At a glance which attachment is right for your excavator:-
10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 42 44 46 48 50t
MB1200
MB1700
HB2500
HYDRAULIC BREAKERS
LIGHT BREAKERS
HEAVY BREAKERS
COMPACTOR PLATES
PAGE 7 PAGE 8
Compactor Plates HC 450 HC 850 HC1050
Carrier Class (tonnes) 4 to 9 9 to 20 20 to 40
Operating Weight (kg) 430 880 1130
Oil Flow (l/min) 76 114 151
Operating Pressure (bar) 150 150 150
Vibrating force (t) 3.6 7.3 10.5
Vibrating frequency (n/min) 2200 2200 2200
Baseplate width (mm) 610 710 864
Baseplate length (mm) 929 1272 1364
Height (mm) 622 764 786
Plate coverage (m2) 0.4 0.68 0.90
Hydraulic compactors are designed for compacting soil, trenches and embankments, as well as driving in and pulling out posts and formwork. Excavator-driven soil compactors work quickly, economically and are easy to operate.
Specially designed to maximise productivity by protecting the operator and machine from vibrations.
▶ Available for excavators 4 to 40 tonnes ▶ Simple and easy to use ▶ Practically maintenance free ▶ Minimises downtime
At a glance which attachment is right for your excavator:-
0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40t
HC450
HC850
HC1050
DIMENSIONS
COMPACTOR PLATES
0 5 10 15 20 25 30 35 40 45 50t
EMV220
EMV300
EMV450
SHEET PILE DRIVERS
PAGE 9 PAGE 10
Sheet Pile Drivers EMV 220 EMV 300 EMV 450
Carrier Class (tonnes) 7-18 12-35 25-45
Dynamic Mass (kg) 370 625 1008
Total Mass (kg) 525 965 1275
Centrifugal Force (kn) 220 300 453
Max Hydraulic Pressure (bar) 350 350 350
Max Push/Pull Force (kg) 7500 15000 15000
Max Pile Mass (kg) 800 800 1000
Frequency (rpm) 3000 2400 2460
Clamp Force (tonnes) 26.5 36 54
Dawsons sheet pile drivers have been designed specifically to drive and extract piles. The pile can be lifted to vertical using the built-in lifting chain where it is then gripped tightly in a powerful hydraulic jaw.
These are a very effective solution when large, dedicated piling rigs are unable to access a work site.
▶ Available for excavators 7 to 45 tonnes ▶ High power to weight ratio ▶ Universal joint for accurate pile positioning ▶ Simple and fast to setup ▶ Can be used on sheet piles, steel beams and girders
At a glance which attachment is right for your excavator:-
DIMENSIONS
SHEET PILE DRIVERS
These robust MG multi grapples are suitable both for sorting and loading demolished materials as well as for demolishing light buildings (masonry, wooden structures).
Atlas Copco’s multi grapple concept is offering low operating weight with high gripping volume. Maximum loading performance and high gripping force.
▶ Available for excavators 5 to 28 tonnes ▶ Low weight and short height ▶ Unique frame design ensuring maximum protection ▶ Long hinge arms for greater closing power ▶ Grapple and wear parts made from carbon steel
ROTATIONAL GRAPPLES
PAGE 11 PAGE 12
Multi Grapples MG 500 MG 1000 MG 1500
Carrier Class (tonnes) 5-9 12-20 17-28
Operating Weight (kg) 460 1150 1700
Max. Closing Force (tonnes) 2.4 4.6 6.8
Oil Flow (l/min) 35-50 85-120 120-170
Operating Pressure (bar) 300 350 350
Oil flow, rotation 35-50 20-25 20-25
Operating pressure, rotation 150-170 190-210 190-210
Capacity (l) 200 500 800
Jaw Opening Max 1500 1950 2100
Grapple Width 700 800 1000
At a glance which attachment is right for your excavator:-
*Grapples are available for use with OR without rotation lines, just ask!
DIMENSIONS
ROTATIONAL GRAPPLES
FIXED PULVERISERS
PAGE 13 PAGE 14
Fixed Pulverisers F 07 F 12RD
Carrier Class (tonnes) 6 to 10 13 to 18
Operating Weight (kg) 550 1190
Total Length (mm) 1330 1740
Total Width (mm) 330 420
Crushing Force (tonnes) 70 150
Steel Cutting (mm) 140 220
Max Jaw Opening (mm) 475 690
Max Cutting Diameter (mm) 20 30
Excavator Oil Flow (l/min) 40 / 60 120 / 200
Manufactured with increased power and durability using state-of-the-art technology. Designed for both demolition work, concrete reduction and material sorting.
▶ Available for excavators 6 to 18 tonnes ▶ Hardened teeth made of special materials ▶ Integrated speed-up valve for increased speed ▶ Bolt on tooth style for quick and effective replacement ▶ Unique hook shape makes it extremely versatile ▶ Designed for lifting and crushing concrete slabs
At a glance which attachment is right for your excavator:-
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20t
F 07RD
F 12RD
DIMENSIONS
FIXED PULVERISER
MULTI PROCESSORS
PAGE 15 PAGE 16
At a glance which attachment is right for your excavator:-
The all new MK Series multi processor offers incredible versatility by allowing for the use of 6 interchangeable jaw kits, which can be safely and efficiently changed in under 5 minutes. Designed for speed and power this all-in-one tool is essential for any demolition fleet.
▶ Available for excavators 18 to 35 tonnes ▶ Innovative hydraulic quick changing system ▶ Change jaws in under 5 minutes ▶ Interchangeable teeth, can be easily replaced ▶ Eliminates hours of potential lost productivity ▶ Saves the cost of having to hire multiple attachments
0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40t
MK15
MK20
Pulveriser Jaw
Tankshear Jaw
Steel Jaw
Universal Jaw
Combi Jaw
Demolition Jaw
JAW KITS AVAILABLE
MULTI PROCESSOR
CLAM SHELL DIGGING BUCKETS
PAGE 17 PAGE 18
Ideal for moving large amounts of spoil including compact soil. Very robust and can be mounted on a wide variety of construction equipment including:- excavators, wheeled loaders, stationary cranes and truck cranes.
▶ Available for excavators 13 to 18 tonnes ▶ High closing force ▶ Shells can be exchanged in under 4 minutes ▶ Used mainly for rail & road construction, civil engineering,
landscaping, trenching and excavation.
CLAM SHELL DIGGING BUCKETS
*Extension shafts are available
Clam Shell Digging Bucket C18VE (80) / (100)
Carrier Class (tonnes) 13 to 18
Operating Weight (kg) 705 / 755
Total Height (mm) 1595 / 1595
Total Width (mm) 800 / 1000
Total Length (mm) 1360 / 1360
Volume (litre) 330 / 415
Load Capacity (kg) 4500 / 4500
Closing Force (kN) 42
Maximum Opening Width (mm) 1650 / 1650
DIMENSIONS
Bucket Style/Sizes No. Teeth Weight (kg) Volume (litre)
80S Clamshell Bucket 9 275 330
100S Clamshell Bucket 9 325 415
SHELL SIZES AVAILABLE
BUCKET CRUSHERS
PAGE 19 PAGE 20
Agile and powerful our selection of “MB Crushers” make light work of any material on site. On-site crushing requires less equipment, less transport, lower overall costs and it only requires one operator.
▶ Available for excavators 4 to 20 tonnes ▶ Solves the problem of disposal, saving signicant costs ▶ Compact and light build, allows for easy transportation ▶ Ideal for all types of site and urban city work
BUCKET CRUSHERS
Bucket Crushers MB C50 BF 60.1
Carrier Class (tonnes) 4 - 10 10 - 20
Operating Weight (kg) 750 1500
Load Capacity (m3) 0.25 0.6
Opening Dimensions (mm) 540 x 250 (L x H) 610 x 510 (L x H)
Operating Pressure (bar) 200 210
Counter Pressure (bar) 10 10
Max Production (m3/h) 10 19,80
Oil Flow (litre) 90 98
DIMENSIONS
*BF60.1 is also available with a magnet attachment
At a glance which attachment is right for your excavator:-
CROSSOVER / SCREENING BUCKETS
PAGE 21 PAGE 22
This new innovative attachment comes in two parts, the crossover bucket which links to a specific module. We have different modules for different applications, allowing multiple jobs to be completed with ease.
▶ Available for excavators 4 to 18 tonnes ▶ Extremely versatile multi-function attachment ▶ Perfect for landscaping, groundworks, mixing and more! ▶ Module changeovers take less than 10 minutes
REMU CROSSOVER XO BUCKETS
CROSSOVER BUCKET XO 2150
Carrier Class (tonnes) 4 - 18
Operating Weight (kg) 315
Bucket Volume (m3) 0.55
Opening Dimensions (mm) 88 x 185 x 97 (L x W x D)
DIMENSIONS
BLADE SCREENER MODULE SCREENER CRUSHER MODULE
Ideal for screening top soil or padding pipelines and cables.
The rotating blades process even the most moist top soil and are available in multiple sizes. Also work great for mixing materials like adding sand or fertilisers.
Ideal for more heavy duty screening such as lumpy top soil, will grind through materials.
The crushing blades process through materials to make them finer. Great for grinding packed matierals, roof tiles, wood and even mixing/aerating compost.
AVAILABLE MODULES:-
AUGERS
PAGE 23 PAGE 24
Our high quality augers are designed with the unique Auger Torque planetary gearbox© ensuring maximum output torque and efficiency. Made with the highest quality components these are the best quality augers available today.
▶ Available for excavators 1 to 20 tonnes ▶ 2-Way valve for single circuit and auxiliary flow ▶ Safe and easy to use ▶ Retains spoil on flights on exit ▶ Extremely durable and reliable ▶ Single piece drive shaft to ensure performance and safety ▶ Various sizes of flights & extensions are available
AUGERS
Augers 1200 3000 MAX
7000 MAX
17000MAX
Carrier Class (tonnes) 1 - 2 2 - 5 5 - 10 10 - 20
Operating Weight (kg) 35 71 112 267
Oil Pressure (bar) 30 - 185 80 - 240 80 - 260 160 - 260
Oil Flow Range (lpm) 15 - 32 27 - 75 60 - 135 80 - 170
Torque Range (Nm) 189 - 1164 959 - 2877 2133 - 6931
10381 - 16869
Drilling Diameter (mm) 100 - 300 100 - 600 150 - 900 150 - 1000
Speed Range (rpm) .5 .5 .5 .5
DIMENSIONS
At a glance which attachment is right for your excavator:-
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20t
7000 MAX
3000 MAX
17000 MAX
1200
POST DRIVERS
PAGE 25 PAGE 26
RIDDLE BUCKETS
Riddle buckets (aka shaker buckets) are an essential tool for anyone involved in sorting or processing materials. They allow brick, debris, concrete and all other contaminates to be quickly seperated from top soil.
▶ Available for excavators 5 to 30 tonnes ▶ Suitable for heavy duty work ▶ Used in demolition, quarrying and landscaping
RIDDLE BUCKETS
Increase your productivity with this extremely easy to use drop weight post driver, it only requires a single person to setup and use. Drives posts effortlessly, accurately and safely every time.
▶ Available for excavators 3 to 8 tonnes ▶ Unique throat gripper plate to hold posts securely ▶ Optional side to side mast tilt ▶ Excellent visibility with the offset mounting bracket
POST DRIVERS
LAND RAKES
PAGE 27 PAGE 28
RIPPER TEETH
These powerful and heavy duty ripper teeth are a very effective method for removing stubborn materials and objects.
▶ Available for excavators 8 to 45 tonnes ▶ Powerful, Reliable, Heavy Duty ▶ Used in demolition, quarrying and landscaping ▶ Unique hook shape makes it extremely versatile ▶ All the piercing teeth are replaceable to extend service life
RIPPER TEETH
Very effective solution for clearing land from materials such as vegetation, plant roots and rocks whilst leaving behind soft soil. Can also be used to clear ponds and waterways.
▶ Available for excavators 5 to 20 tonnes ▶ Strong and effective ▶ Ideal for breaking up hard compacted materials ▶ Used in landscaping, groundworks and agricultural work
LAND RAKES
ROUND PILE CROPPERS
PAGE 29 PAGE 30
THE CRUNCHER
These powerful hydraulic pilebreakers can be used to quickly and efficiently crop piles between 300mm to 900mm in diameter. Cropped piles are cleanly trimmed, leaving sound concrete and no cracks below the cut-off level.
▶ Available for excavators 8 to 20 tonnes ▶ Time saving and economic in use ▶ Vibration free ▶ Reduces health and safety risks ▶ Certified chains are supplied with all pile croppers
The Cruncher is the worlds fastest pile breaker, specifically designed to break piles up to 350mm square. Cleanly cuts piles and retains the debris within the body of The Cruncher, allowing for easy disposal.
▶ Available for excavators 13 tonnes and above ▶ Small size and lightweight with high breaking force ▶ Can cut reinforcing bars or leave them intact ▶ The worlds fastest pile breaker ▶ Easy to use and very reliable
ROUND PILE CROPPERS THE CRUNCHER
SQUARE PILE CROPPERS
PAGE 31 PAGE 32
TILTING BUCKETS
Ideal for all forms of general landscaping work, with 45º of tilt angle you will be able to reach all those awkward spots without need for excavator repositioning, increasing productivity and accuracy.
▶ Available for excavators 5 to 20 tonnes ▶ Can quickly tilt 45º left or right ▶ Used mainly for clearing, ditching, trenching, level grading,
profiling and backfilling
TILTING BUCKETS
These square pile croppers are suspended by a 4 leg chain from the excavator and lowered over the pile, it then has 4 rams that cut the pile to the desired height leaving all the rebar intact.
▶ Available for excavators 8 tonnes and above ▶ For 250 - 350 mm square piles ▶ Certified chains are supplied with all pile croppers
SQUARE PILE CROPPERS
‘V’ BUCKETS
PAGE 33 PAGE 34
Essential tool for digging a stable ditch in a wide variety of ground conditions. The shape has been designed for optimum digging ability and increased strength.
▶ Available for excavators 5 to 20 tonnes ▶ Gives a clean taper-sided ditch ▶ Used mainly for trenching, drainage ditches ▶ Various sizes are available
‘V’ BUCKETS
Pallet forks give your excavator the material handling capability of a telehandler without the high cost. Coupled with the superior accessibility of a tracked machine and 360° rotation you can quickly manoeuvre palletised materials in all conditions.
▶ Available for excavators 5 tonne and above ▶ Adjustable tines to fit different pallet dimensions ▶ Transform your excavator into a telehandler ▶ Versatile and cost-effective
PALLET FORKS
PALLET FORKS
CONTACT US
PAGE 35 PAGE 36
Email: [email protected]
Tel: 07715 091535
Web: www.chippindaleplant.com
Hire: [email protected]: [email protected]: Call your local depot (see next pages)
Follow us on social media for all the latest news & offers:
www.twitter.com/ChippindaleHire
www.facebook.com/ChippindalePlantLtd
www.instagram.com/Chippindale_Plant
www.linkedin.com/company/Chippindale-plant
AWARDS & ACCREDITATIONS
ACCREDITATIONS
We are committed to providing exceptional quality of service, so we maintain a number of respected accreditations to ensure we continually improve the way we do business.
AWARDS
11000 COMPANIES TO INSPIREBRITAIN 2017 - LSE
YORKSHIRE FASTEST 50 2017YORKSHIRE POST / WARDHADAWAY
YORKSHIRE FASTEST 50 2016YORKSHIRE POST / WARDHADAWAY
DEALER OF THE YEAR 2014
DEALER OF THE YEAR 2014PARTS & AFTERSALES SERVICE
For any attachments enquiries or to hire today contact us on:
For any plant, tool or accommodation enquiries contact us on:
DEPOT LOCATIONS
PAGE 37 PAGE 38
DEPOT LOCATIONS
HuddersfieldHillhouse LaneHuddersfieldHD1 6JT
Tel: 01484 539699
Fax: 01484 428826
Email:[email protected]
KeighleyValley RoadKeighleyWest YorkshireBD21 4LY
Tel: 01535 606135
Fax: 01535 690303
Email:[email protected]
Leeds &Head OfficePRIMA HOUSERing Road Lower Wortley Leeds LS12 5PX
Tel: 0113 263 2344
Fax: 0113 279 1710
Email:[email protected]
CatterickUnit 7A Easton WayCatterick RoadColburnDL9 4GA
Tel: 01748 832800
Fax: 01748 832231
Email:[email protected]
DEPOT LOCATIONS
PAGE 39 PAGE 40
SheffieldUnit 5West Carr RoadBrooklands Ind. EstateDinningtonSheffieldS25 2JZ
Tel: 01909 568855
Fax: 01909 561144
Email:[email protected]
YorkHospital Fields RoadFulfordYorkY010 4EW
Tel: 01904 636977
Fax: 01904 620829
Email:[email protected]
ManchesterOmega WorksStuart RoadBredburyStockportSK6 2SR
Tel: 0161 406 0666
Fax: 0161 406 0777
Email:[email protected]
NewcastleUnit 6 Whickham BankSwalwellNewcastle-Upom-TyneNE16 3BP
Tel: 0191 274 4441
Fax: 0191 274 4449
Email:[email protected]
Principal Exclusions (Continued)
• Loss or damage due to:- a) Cleaning and conduct of routine maintenance of the property b) Breakdown or wear and tear c) Treatment of foreign bodies d) Willful act
• Loss or damage due to fraud or dishonesty of employees• Equipment not collected 48 hours after being off hired (exc. Sundays)• Loss or damage in Northern Ireland resulting from riot or civil commotion• Motor vehicles other than unlicensed or designed for use as a tool of trade• Inventory losses• Legal liability for injury to third parties or damage to their property• Use of plant underground• Loss by fraud or theft if security conditions and checks have not been complied with• Any difference between the amount of any claim payment any sum payable under Hire Association Europe Terms and Conditions
FAQs
1. The Financial Services Authority (FSA) The FSA is the independent watchdog that regulates financial services. It requires us to give you this information. Use this information to decide if our services are right for you.
2. Whose products do we offer? We only offer a single insurance product. HAE HireGuard from Zurich Insurance Company, to cover hired equipment.
3. Which service will we provide you with? We will not offer any advice and you will need to make your own decision regarding the suitability of any policy of insurance purchased.
4. What will you have to pay for our services? We normally recieve a commission from the insurer with whom we place your business.
Chippindale Plant are authorised to offer Hireguard Insurance on all items hired. Subject to the terms and conditions detailed below.
A premium will be charged on top of the normal hire rate which will be clearly itemised on your hire contract and invoice.
WHAT YOU NEED TO KNOW
HAE HireGuard Customer Summary of Cover
Property hired out under HAE terms and conditions and Insured under HAE HireGuard is covered for:-
• Loss or damage at any situation in the United Kingdom including whilst in transit between such situations other than by sea and air• A Limit of liability up to £50,000 in any one occurrence no single article limit• Full replacement value for property less than 24 months old
Principal Exclusions
• Policy Excess• Continuing hire charges and consequential losses• Recovery costs when accidently immobilized• Loss or damage whilst in a vehicle unless:- a) All doors are locked and windows/openings are securely fastened whilst unattended b) Property is securely mounted or fixed to the vehicle or kept in a suitable container whilst in transit• Loss or damage to cutting edges (other than diamond cutting wheels) tools, trailing cables or fixing pipes other than when loss or dam age results from the loss of the complete item or items of property insured
PAGE 41 PAGE 42
HAE HireGuard Insurance Services HAE HireGuard Insurance Services
NOTES
PAGE 43 PAGE 44
NOTES
FAQs (Continued)
5. Who regulates us? We are an Appointed Representative of The Insurance Partnership Services Limited via its trading arm HAE Insurance Services, which is authorised and regulaed by the Financial Services Authority. Their FSA Register number is 312916. You can check this on the FSA’s Register at www.fsa.gov.uk/register or by contacting the FSA on 0845 606 1234. 6. What to do if you have a complaint? Our aim to provide a first class service, however if you wish to register a complaint, please contact the Insurance Partnership Services Limited.
Write to: M J Green ACII FCILA, Operations Director The Insurance Partnership Services Ltd. Partnership House, Priory Park East, Kingston Upon Hull, HU4 7DY
7. Are we covered by the Financial Services Compensation Scheme (FSCS)? We are covered by the FSCS. You may be entitled to compensation from the scheme if we cannot meet our obligations. This depends of the type of business and the circumstances of the claim. Insurance advice and arrangement is covered for 100% of the first £2,000 and 90% of the remainder of the claim, without any upper limit.
8. Demands & Needs Statement (Non-Advised) The HAE HireGuard policy is designed to meet the demands and needs of Plant & Equipment hirers who wish to insure on an ‘All Risks’ basis against their contractual liability, arising as a result of loss and damage, for the replacement cost of the equipment hired up to 2 years old, thereafter replacement less depreciation subject to the principal exclusions detailed above.
9. Treating Customers Fairly We treat clients as we ouselves would wish to be treated in a fair and supportive way with customer service at the cornerstone of our proposition.
NOTES
PAGE 45 PAGE 46
NOTES
PAGE 47 PAGE 48
NOTES
PLANT HIRE TEL: 0113 263 2344
TOOL HIRE TEL: 01484 539699
SITE ACCOMMODATION TEL: 0161 775 8001
OTHER AVAILABLE SERVICES