Catalogue Supplement

© 2014 KLANN-Spezial-Werkzeugbau-GmbH, Germany Chapitre 6 Cat. Supplement 8.12 0186-22Ke140709.doc hu-gm

1/1

KL-0186-22 K - Injector Nozzle Puller Set, Vauxhall/Opel 1.3*; 1.6; 1.7; and 2.0 (German Utility Model)

Suitable for Vauxhall/Opel, Saab and Fiat 1.3*; 1.6; 1.7 and 2.0 Common-Rail Diesel engines.

Found in: Vauxhall/Opel (1.3*; 1.6; 1.7 and 2.0 engines) Agila, Insignia, Combo, Corsa C, Corsa D, Meriva A, Astra H, Astra J, Meriva B, Zafira A, Zafira B, Tigra B; Fiat (1.3* and 1.6 engines) Punto (188), Idea (135), Doblo (223), Linea (110), Bravo (198), Doblo (263); Saab (2.0 engines) 9-5 (9650)

Engine codes: Vauxhall/Opel: Z13DT*, Z13DTH*, Z13DTC*, Z13DTJ*, A16FDH, A16FDL, A17DT, A17DTC, A17DTJ, A17DTR, A20DT, A20DTC, A20DTH, A20DTJ, A20DTR Fiat: 188A9.000*, 198A3.000 Saab: A20DTH, A20DTR

*Note: On the 1.3 engines, always two injectors need to be extracted simultaneously (please, refer to KL-1683-10 K).

Field of Application

The KL-0186-22 K injector nozzle puller set enables the removal of very tight-fitting or stuck injector nozzles to be performed directly on the vehicle without having to dismount the cylinder head. The special extraction bridge and pull spindle allow the user to extract injector nozzles quickly and easily.

- The injector nozzle needs to be opened for this. Note: Before reinstalling an opened injector nozzle, it is important that you to read and observe the injector nozzle manufacturer's directions and specifications. If necessary, have the injector nozzle tested and checked by an authorized workshop.

Scope of Delivery Pos. Part No. Description

- KL-0186-22 K Injector Nozzle Puller Set, Vauxhall/Opel 1.3*; 1.6; 1.7; and 2.0

Composed of:

1 KL-0186-1214 Adaptor with thrust bearing 2 KL-0186-1211 Base plate 3 KL-0186-1212 Support bar (2 units) 4 KL-0186-1213 T-slot screw M8 (2 units) 5 KL-0206-1011 Shoulder nut M8 (6 units) 6 KL-0583-1005 Pull spindle M17x1, 200mm long 7 KL-0186-1611 Pull spindle M20x1, 145 mm long 8 KL-1383-1113 Pull spindle M14x1.5 mm, 132 mm long 9 KL-0186-1215 Shoulder nut M16x1.5 mm 10 KL-0186-2201 Special insert 11 KL-0369-4505 A Special bit insert, size (waf)10mm 12 KL-0369-461 A Special socket, size (waf) 29mm, ½“ drive 13 KL-1383-1222 A Special Socket, size (waf) 27 mm, ½" drive 14 KL-0014-0030 Molybdenum disulphide paste 15 KL-0126-221 Magnetic Valve Collet Lifter (flexible) 16 KL-0186-1238 Set of support bolts M6, 145 mm (4-pc. set) 17 KL-0186-1239 Set of support bolts M7, 132.5 mm (4-pc.set) 18 KL-0186-1232 Set of support bolts M8, 120 mm (4-pc set) 19 KL-0186-1261 Set of spacer nuts, 10 mm (4-pc set) - KL-0186-1290 Plastic storage case

Technical Data

Max. load capacity of extraction bridge: .....................................12 t

Pull spindle “6“ ........................................M17x1 mm, 200 mm long

Pull spindle “7“ ........................................M20x1 mm,145 mm long

Pull spindle “8“ ....................................... M14x1.5 mm,132 mm long

KL-0186-22 K

Scope of delivery:

Application example:

2

3

1

5 4

6

7 8

9 10 11 12 13 14 15

16

17 18

19