Catalogue

Copyright 2010

PRICE LISTand technical guide

www.spinnythings.com.au

EFFECTIVE: 1 MAY 2010

1

http://www.spinnythings.com.au/

This price list supersedes all previous price lists

Prices are subject to change without notice

All Rights Reserved.

ALL PRICES INCLUDE GST.

Prices do not include freight.

How to Order:1) Fax or e-mail the below order form, or call us direct (9AM - 6PM WEEKDAYS),

2) On the order, include:

If you would like to use our freight method, or your own transport and account number.

3) Any backorders and a total amount will be advised by your preferred method fax / phone / e-mail,

4) Items will be shipped,

OR for pick up:

Pick ups are from our Pakenham warehouse - WEEKDAYS. We can be in

and out throughout the day. For your sake, please call us before coming,

this will ensure there will be someone at the warehouse to help you.

How to Pay:Payment to be received before goods are dispatched, unless otherwise arranged.

Payment can be made via:

Internet Banking

Please use your quote number as the reference.

BSB: 083 214

A/C No.: 209 88 11 44

Unless your account is with the National Australia Bank it usually takes overnight

for the money to go in (but can take up to 3 working days).

Cash (pick up)

Money Order

EFTPOS - Cheque or Savings accounts (pick up)

Credit Card (pick up or over the phone) - extra 3% charged,

maximum of $100 over the phone

(Different standard amounts of insurance apply - depending on the freight

method used. Please ask at time of order. Please advise if extra insurance is

required and this will be charged at an extra cost, if available.)

2

Contact: David & Tanya Platt

Phone: 0412 636 376

Fax ONLY: 03 5941 5701

Order Sheet e-mail: [email protected]

ABN: 98 020 828 626

110 Brown Road,

Pakenham VIC 3810

Name:

Phone:

Fax:

e-mail:

Ship to address:

Freight method:

Insurance required:

QTY Part No. Description Price

Freight

Total

3

AXLE SIZING

TECHNICAL GUIDE

************

YOU MUST HAVE YOUR RIMS & TYRES BEFORE SELECTING YOUR AXLE

LENGTH!!!

************

There are so many different rim widths and offsets out there. If you get your axle

and THEN your rims, 9 out of 10 times the axle will be wrong -

by up to 4 INCHES!

Use our EXPERIENCE and fill out one of the Axle Measurement Worksheets below

- it will save you TIME and MONEY!

4

AXLE SIZING - cont.

AXLE SPECIFICATIONS

Axle length is measured from tip to tip of the bare axle

39mm Round Axles - 750kg maximum operating weight per Axle. Runs LM (Holden) bearings

40mm Square Axles - 1000kg maximum operating weight per Axle. Runs LM (Holden) bearings

45mm Square Axles - 1400kg maximum operating weight per Axle. Runs SL (Ford) bearings

5

BEARINGS

LM (Holden bearings) suit 39mm Round & 40 mm Square Axles.

· Outer (small) bearings # LM 11949 - Bearing

# LM 11910 - Cup

· Inner (large) bearings # LM 67048 - Bearing

# LM 67010 - Cup

SL "Slimline" (Ford bearings) suit 45mm Square Axles

· Outer (small) bearings # L 12749 - Bearing

# L 12710 - Cup

· Inner (large) bearings # L 68149 - Bearing

# L 68110 - Cup

6

STUD PATTERNS / PCD(for all hubs / hub drums / hub discs)

Ford - 1/2" UNF studs - 5 Studs - PCD 114.3 - 68mm from stud to stud

Holden HT - 7/16" UNF studs - 5 Studs - PCD 108 - 65mm from stud to stud

Holden HQ - 7/16" UNF studs - 5 Studs - PCD 120.6 - 72mm from stud to stud

Commodore - 7/16" UNF studs - 5 Studs - PCD 120 - 72mm from stud to stud

Gemini - 7/16" UNF studs - 4 Studs - PCD 100 - not available in braked kits

Toyota - 7/16" UNF studs - 4 Studs - PCD 114.3 - not available in braked kits

Mini - 7/16" UNF studs - 4 Studs - PCD 101.6 - not available in braked kits

Landcruiser 100 series - 9/16" UNF studs - 5 Studs - PCD 150

BRAKES

All trailers over 750kg GVM require brakes on at least one axle

All trailers over 2.0T to 4.5T require brakes on all axles and a breakaway system.

Minimum inside diameter of rim for brakes to fit

Disc brake systems (hydraulic or mechanical) - 11.5" or 292mm

9" Drum Brake systems (hydraulic or mechanical) - 11" or 280mm

10" Drum Brake systems (electric) - 10.6" or 270mm

Landcruiser 80 series,

F100 - 1/2" UNF studs - 6 Studs - PCD 139.7 - 70mm between studs

(You will need to use Velox discs if

your rims are smaller than this)

7

BRAKES - cont.

MECHANICAL BRAKE SET-UP WITH BOAT TRAILER HANDBRAKE(we recommend you make your own bar to suit your drawbar - as shown in red on the under-side of the drawbar -

so cable remains within the confines of the trailer)

MECHANICAL BRAKE SET-UP WITH A-FRAME HANDBRAKE(Please note: this picture incorrectly shows the caliper mounting bracket mounted to the wrong side of the caliper.

The caliper will only bolt on one way - and that is where the mounting bracket is between the disc and the caliper.

However, it still gives a good idea of how the system fits together)

8

COUPLINGS & BASE PLATES

NON-BRAKED COUPLINGS

BRAKED COUPLINGS

Standard bolt position for 4 hole mount

CBPV3

CBPV2CBP2

CBPVA4

CBP4

9

PLASTIC MUDGUARDS

Sorry - we DO NOT sell the brackets for these mudguards because they cost more than the

mudguards! However, they are VERY easy to make if you're handy with a welder. Here are some

pictures and a diagram to help you out:

10

TANDEM PLASTIC MUDGUARDS

All tandem Plastic Mudguards are 2 singles put together. This is generally done by cutting the middle

steps out and making up a bracket that both joins the 2 Mudguards together and covers the cut area.

Below is a suggestion:

11

ROCKER ROLLER SPRINGS

12

SLIPPER SPRINGS

45mm wide

60mm wide

EYE TO EYE SPRINGS

45mm wide

OFFROAD SPRINGS

13

CHROME MAG & LUG NUTS

Available sizes:

Lug Nuts 1/2", 7/16", 12 x 1.25mm

Mag Nuts 1/2", 7/16", 12 x 1.25mm, 12mm x 1.5mm

14

PRICE LIST

DIY TRAILER KITS

PRICE EA

ITEM No. DESCRIPTION INCL. GST

KIT-S750 DIY Single Axle Trailer Kit - 750kg capacity 232.85$

- state what size/length axle, the stud pattern and bearings you need, how many holes you want in the

coupling, and any OPTIONS you want

INCLUDES:

1x 39mm round Axle, 750kg capacity - choose from 59" - 69"

2x 5-Leaf, 45mm wide Slipper Springs

2x Hubs - Ford/Holden 5-Stud - complete with studs, nuts, bearings, seals & dust caps (please specify

stud pattern needed)

1x Spring Ubolt & Hanger Kit - suit 39mm round axle

1x 2 or 3-hole quick-release 50mm Coupling (please specify)

1x 2 or 3-hole Coupling base plate

2x or 3x High-Tensile 1/2" x 1-1/2" Coupling Bolts

UPGRADE OPTIONS: ADD:

Longer 39mm round Axle - choose from 70" - 79" 8.55$

6 Stud 4WD Landcruiser Hubs instead of 5 stud Ford/Holden Hubs 25.85$

GALVANISED 5 stud Hubs, Springs, Ubolt/Hanger Kit and ZINC coupling

(NB - hangers & spring pads in Ubolt/Hanger kit are still black for welding)47.80$

Price for galvanised axles on application

EFFECTIVE

FROM:

1 MAY 2010

PRICES

INCLUDE

GST

KITS

KIT-S750

15

DIY TRAILER KITS - cont.

PRICE EA


KIT-S1000 DIY Single Axle Trailer Kit - 1000kg capacity 266.85$

- state what size/length axle, the stud pattern and bearings you need, how many holes you want in the

coupling, and any OPTIONS you want

INCLUDES:

1x 40mm square Axle, 1000kg capacity - choose from 59" - 69"




1x Spring Ubolt & Hanger Kit - suit 40mm square axle

1x 2 or 3-hole quick-release 50mm Coupling (please specify)

1x 2 or 3-hole Coupling base plate

2x or 3x High-Tensile 1/2" x 1-1/2" Coupling Bolts


Longer 40mm square Axle - choose from 66" - 75" 9.50$



6 Stud 4WD Landcruiser Hubs instead of 5 stud Ford/Holden Hubs 25.85$

GALVANISED 5 stud Hubs, Springs, Ubolt/Hanger Kit and ZINC coupling


Mechanical Disc Brake Kit - Galvanised - instead of standard hubs and standard coupling

(see all inclusions under MDBK, further down)307.50$


KITS

KIT-S1000

16


PRICE EA


KIT-T1665-SS DIY Tandem Axle Trailer Kit - 1665kg capacity 775.10$

- state what size/length axle, the stud pattern you need, and any OPTIONS you want

INCLUDES:

2x 40mm square Axle, 1000kg capacity - choose from 59" - 69"


1x Mechanical Disc Brake Kit - Galvanised (see inclusions under MDBK, further down)



1x Tandem U-bolt & Hanger Kit - suit 40mm square axle

1x 4-hole Coupling Base Plate to suit A-frame or straight drawbar (depending on what handbrake you

choose)

4x High-Tensile 4" x 1/2" Coupling Bolts


Longer 40mm square Axle - choose from 66" - 75" $ 19.00



GALVANISED 5 stud Hubs, Springs, Ubolt/Hanger Kit

(NB - hangers & spring pads in Ubolt/Hanger kit are still black for welding) $ 79.00


KITS

KIT-T1665-SS

17


PRICE EA


KIT-T2000-SS DIY Tandem Axle Trailer Kit - Slipper Spring Suspension - 2000kg capacity 858.30$

- state what size/length axle, the stud pattern and bearings you need, which handbrake you

need - A-frame or for Boat Trailer, and any OPTIONS you want

INCLUDES:


2x 45mm square Axle 1400kg rated (higher rating legally required to compensate for non

load-sharing springs) - available from 62" to 65" long (please specify) - longer axles available

from UPGRADES below

4x 7 leaf, 45mm wide Slipper Springs

2x Hubs - Ford/Holden 5-Stud - complete with studs, nuts, bearings, seals & dust caps

(please specify stud pattern needed)

1x Tandem U-bolt & Hanger Kit - suit 45mm square axle

1x 4-hole Coupling Base Plate to suit A-frame or straight drawbar (depending on what handbrake you

choose)



Longer 45mm square Axles - choose from 66" - 75" 22.80$



GALVANISED 5 stud Lazy Hubs, 7 leaf Springs, and Ubolt/Hanger Kit


6 Stud 5/8" Landcruiser Discs & 7-1/2" Hubs instead of standard 5 stud Discs & Hubs 167.00$


KITS

KIT-T2000-SS

18


PRICE EA


KIT-T2000-RR DIY Tandem Axle Trailer Kit - Roller Rocker Suspension - 2000kg capacity 938.00$

- state what size/length axle, the stud pattern and bearings you need, which handbrake you

need - A-frame or for Boat Trailer, and any OPTIONS you want

INCLUDES:


2x 40mm square Axle, 1000kg rated each - available from 58" to 65" long (please specify)

- longer & bigger axles available from UPGRADES below

1x COMPLETE 5-Leaf Rocker Roller Tandem LOAD-SHARING Springs Assembly - 2000kg rated

1x Tandem U-bolt Kit - suit 40mm square axle

2x Hubs - Ford/Holden 5-Stud - complete with studs, nuts, bearings, seals & dust caps

(please specify stud pattern needed)

1x 4-hole Coupling Base Plate to suit A-frame or straight drawbar (depending on what handbrake

you choose)






45mm square Axle, 1400kg (instead of 40mm square axles) - choose from 58" - 61" $ 64.60





GALVANISED 5 stud Lazy Hubs, Rocker Roller Springs, and Ubolts

(NB - hangers on Rocker Roller Spring Assembly are still black for welding) $ 204.25

6 Stud 5/8" Landcruiser Discs & 7-1/2" Hubs instead of standard 5 stud Discs & Hubs

(NB - 6 Stud Discs & Hubs are ONLY available if purchasing WITH 45mm square axle Upgrade) $ 165.85


KITS

KIT-T2000-RR

19

MECHANICAL DISC BRAKE KITS

PRICE EA


Marine mechanical disc brake kit - Galvanised 363.00$

- state what size axle you have 39mm round, 40mm or 45mm square, 45mm round or drop axle,

A-frame handbrake or boat trailer handbrake (single drawbar), and the stud pattern and

bearings you need

INCLUDES:

- 2x Galvanised 1/2" disc hubs (5 stud - Ford, HT Holden, HQ Holden/Commodore) with bearings,

nuts and marine seals

- 2x Galvanised mechanical brake calipers with brake pads and mounting bolts

- 1x Galvanised 2000kg over-ride coupling

- 1x Galvanised standard handbrake OR galvanised boat trailer handbrake

- 2x Caliper mounting plates, black - available in 39mm round, 40mm or 45mm square, 45mm round

or drop axle

- 1x Galvanised 8mtr brake cable with 4x clamps

- 1x Galvanised cable adjuster with s/steel workings

THE ABOVE DISC KITS ARE ALSO AVAILABLE WITH VELOX DISCS (galvanised,

not Landcruiser) - ADD $87.20 TO THE ABOVE PRICES

Marine mechanical disc brake kit - Galvanised - suit LANDCRUISER & other 6-stud 4WD 510.40$

- state what size axle you have 45mm square or 50mm round, A-frame handbrake or boat

trailer handbrake

INCLUDES:

- 2x 5/8" Galvanised disc hubs (6 stud - Landcruiser) with Ford (slimline) bearings, nuts and

marine seals

- 2x Galvanised mechanical brake calipers with brake pads and mounting bolts


- 1x Galvanised standard handbrake OR galvanised boat trailer handbrake

- 2x Caliper mounting plates, black - available in 45mm square, or 50mm round



Same kit to suit 5 stud Landcruiser, and various (NON-GAL DISCS) $ 474.60

KITS

MDBK

MDBK-LCG

OR

MDBK

20

HYDRAULIC DISC BRAKE KITS

PRICE EA


Hydraulic disc brake FULL kit - Galvanised 495.80$


and what stud pattern & bearings you need - kit does not include hose fittings or tube work

INCLUDES:

- 2x Galvanised disc hubs (5 stud - Ford, HT Holden, HQ Holden/Commodore) with bearings,

nuts and marine seals

- 2x Galvanised hydraulic brake calipers with brake pads and mounting bolts

- 2x Caliper mounting plates, black - available in 39mm round, 40mm or 45mm square, 45mm round

or drop axle


- 1x Galvanised hydraulic handbrake assembly

- 1x 3/4" master cylinder (can be upgraded to 7/8" - for tandem)



HDBK-FULL-LCG Hydraulic disc brake FULL kit - Galvanised - suit LANDCRUISER & other 6-stud 4WD 643.20$

- state what size axle you have 45mm square or 50mm round - kit does not include hose fittings

or tube work

INCLUDES:


standard seals


- 2x Caliper mounting plates, black - available in 45mm square or 50mm round



- 1x 3/4" master cylinder (can be upgraded to 7/8" - for tandem)


KITS

HDBK-F

FULL KIT

21

HYDRAULIC DISC BRAKE KITS - cont.

PRICE EA


Hydraulic disc brake HALF kit - Galvanised 381.60$


and what stud pattern & bearings you need - kit does not include hose fittings or tube work

INCLUDES:

- 2x Galvanised disc hubs (5 stud - Ford, HT Holden, HQ Holden/Commodore) with bearings, nuts

and marine seals


- 2x Caliper mounting brackets, black - available in 39mm round, 40mm or 45mm square, 45mm

round or drop axle



HDBK-LCF-HALF Hydraulic disc brake HALF kit - Galvanised - suit LANDCRUISER & other 6-stud 4WD 529.00$

- state what size axle you have 45mm square or 50mm round - kit does not include hose fittings

or tube work

INCLUDES:


standard seals


- 2x Caliper mounting plates, black - available in 45mm square or 50mm round


HYDRAULIC DISC LINE KITS

PRICE EA


BRAKE-HLK-SING-DISC Hydraulic Line Kit Single Disc 56.15$

INCLUDES:

2x Inverted Flare Female x Copper Seal Male 3/8 UNF

2x Copper Washer 3/8

1x Inverted Flare T-piece

5x Inverted Flare Nut 3/8 short

1x Hydraulic Brake Hose 400mm (500mm for Landcruiser)

1x Inverted Flare Nut 3/8 long

8x metres Bundy Tube 3/16

BRAKE-HLK-TAN-DISC Hydraulic Line Kit Tandem Disc 111.80$

4x Inverted Flare Female x Copper Seal Male 3/8 UNF

4x Copper Washer 3/8






HDBK-HALF

KITS

HALF KIT

22

MECHANICAL DRUM BRAKE KITS

PRICE EA


Mechanical Drum Brake FULL Kit 9" 429.60$

- state what size axle you have 39mm or 45mm round, 40mm or 45mm square - and the stud

pattern & bearings you need

INCLUDES:

- 1x 9" Mechanical Backing Plate - right hand side

- 1x 9" Mechanical Backing Plate - left hand side

- 2x 9" x 1 3/4" Hub Drums (5 stud - Ford, HT Holden, HQ Holden/Commodore, and various) with

bearings, nuts & seals

- 2x Weld rings with nuts - to suit mechanical backing plate - available in 39mm or 45mm round,

40mm or 45mm square


- 1x Galvanised standard handbrake



Same kit to suit 6 stud Landcruiser, and various $ 439.00


PRICE EA


Mechanical Drum Brake HALF Kit 9" 315.60$

- state what size axle you have 39mm or 45mm round, 40mm or 45mm square - and the

stud pattern & bearings you need

INCLUDES:

- 1x 9" Mechanical Backing Plate - right hand side

- 1x 9" Mechanical Backing Plate - left hand side



- 2x Weld rings with nuts - to suit mechanical backing plate - available in 39mm or 45mm round,

40mm or 45mm square


Same kit to suit 5 Stud Landcruiser, and various $ 362.20

KITS

M9BK-F

M9BK

M9BK

M9BK-F

23

HYDRAULIC DRUM BRAKE KITS

PRICE EA


Hydraulic Drum Brake FULL Kit 9" 397.80$


pattern & bearings you need - does not include hose fittings or tube work

INCLUDES:

- 1x 9" Hydraulic Backing Plate - right hand side

- 1x 9" Hydraulic Backing Plate - left hand side



- 2x Weld rings with nuts - to suit hydraulic backing plate - available in 39mm or 45mm round,

40mm or 45mm square



- 1x 3/4" master cylinder (can be upgraded to 7/8" master cylinder)

Same kit to suit 6 stud Landcruiser, and various 407.20$


PRICE EA


H9BK-H Hydraulic Drum Brake HALF Kit 9" 283.60$


pattern & bearings you need - does not include hose fittings or tube work

INCLUDES:

- 1x 9" Hydraulic Backing Plate - right hand side

- 1x 9" Hydraulic Backing Plate - left hand side



- 2x Weld rings with nuts - to suit hydraulic backing plate - available in 39mm or 45mm round,

40mm or 45mm square



KITS

H9BK-F

H9BK-H

H9BK-F

24

HYDRAULIC DRUM LINE KITS

PRICE EA


BRAKE-HLK-SING-DRUM Hydraulic Line Kit Single Drum 44.05$

INCLUDES:






BRAKE-HLKT-DRUM Hydraulic Line Kit Tandem Drum 87.60$






KITS

25

ELECTRIC DRUM BRAKE KITS

PRICE EA


Electric Drum Brake Kit 10" 377.10$

- state what size axle you have 39mm or 45mm round, 40mm or 45mm square - and the stud pattern &

bearings you need

INCLUDES:

- 1x 10" Electrical Backing Plate - right hand side

- 1x 10" Electrical Backing Plate - left hand side

- 8x Zinc plated Nyloc Nut 7/16 UNF - Suits Electric Backing Plate



- 2x Weld rings with nuts - to suit electric backing plate - available in 39mm or 45mm round, 40mm or

45mm square



ADDITIONS TO ELECTRIC KIT

PRICE EA


BCK Brake Cable Kit - suit mechanical & electric brake set-ups 20.00$

INCLUDES:



EC35Z 3500kg Electric coupling zinc plated with adjustable screw & handbrake 75.00$

SEE DETAILED DIAGRAM OF COUPLING BOLT HOLE CONFIGURATION IN THE TECHNICAL GUIDE - PAGE 9

E10BK

KITS

EC35ZBCK

E10BK

26

SPRING U-BOLT/HANGER KITS - SINGLE AXLE

PRICE EA


SSHKSingle Spring U-Bolt & Hanger Kit (single axle) - State if you have a 39mm round, 40mm square or

45 mm square axle (suit slipper type)27.00$

INCLUDES:

- 4x U-bolts with nyloc nuts - black

- 2x Eye bolts with nyloc nuts - black

- 2x Fishplates - black

- 2x Spring pads - black

- 2x Front spring hangers - black

- 2x Rear spring hangers - black

PRICE EA


SSHK-PGSingle Spring U-Bolt & Hanger Kit - Part Galvanised - (single axle) - State if you have a 39mm

round, 40mm square or 45 mm square axle (suit slipper type)40.70$

INCLUDES:

- 4x U-bolts with nyloc nuts - galvanised

- 2x Eye bolts with nyloc nuts - galvanised

- 2x Fishplates - galvanised




Black is easier to weld and is required if you are hot-dip galvanising your trailer (anything

galvanised will need to be stripped before hot-dipping)

KITS

SSHK

SSHK-PG

27

SPRING U-BOLT/HANGER KITS - SINGLE AXLE - cont.

PRICE EA


SSHK-FGSingle Spring U-Bolt & Hanger Kit - Fully Galvanised - (single axle) - State if you have a 39mm

round, 40mm square or 45 mm square axle (suit slipper type)48.30$

INCLUDES:




- 2x Spring pads - galvanised

- 2x Front spring hangers - galvanised

- 2x Rear spring hangers - galvanised

KITS

SSHK-FG

28

SPRING U-BOLT/HANGER KITS - TANDEM AXLE

PRICE EA


TSHKTandem Spring U-Bolt Hanger Kit (double axle) - State if you have a 39mm round, 40mm square or

45 mm square axle (slipper type)54.30$

INCLUDES:







- 2x Middle deep hangers - black

PRICE EA


TSHK-PGTandem Spring U-Bolt & Hanger Kit - Galvanised - (double axle) - State if you have a 39mm round,

40mm square or 45 mm square axle (slipper type)85.70$

INCLUDES:







- 2x Middle deep hangers - black

Black is easier to weld and is required if you are hot-dip galvanising your trailer (anything

galvanised will need to be stripped before hot-dipping)

KITS

TSHK

TSHK-PG

29

SPRING U-BOLT KITS

PRICE EA


SUBK Spring U-Bolt Kit - State if you have a 39mm round, 40mm square or 45 mm square axle 17.80$

INCLUDES:





PRICE EA


SUBK-PGSpring U-Bolt Kit - Part Galvanised - State if you have a 39mm round, 40mm square or 45 mm square

axle31.50$

INCLUDES:





Black is easier to weld and is required if you are hot-dip galvanising your trailer (anything galvanised will

need to be stripped before hot-dipping)

KITS

SUBK

SUBK-PG

30

SPRING U-BOLT KITS - cont.

PRICE EA


SUBK-GALSpring U-Bolt Kit - Fully Galvanised - State if you have a 39mm round, 40mm square or 45 mm square

axle33.50$

INCLUDES:





PRICE EA


SUBK60Spring U-Bolt Kit, suit 60mm wide spring - State if you have a 39mm round, 40mm square or 45mm

square axle18.50$

INCLUDES:




Same kit with 50mm u-bolts 23.35$

SUBK60-GSpring U-Bolt Kit, suit 60mm wide spring - State if you have a 45mm square axle or 50mm square

axle32.45$

INCLUDES:




KITS

SUBK-GAL

31

AXLES - BLACK - 39MM ROUND- SUIT LM/HOLDEN BEARINGS

PRICE EA


AXS3959-1498 Axle 39mm Round - solid steel - 59" - 1498mm, complete with nut, split pin and washer, 750kg 68.00$


AXS3961-1549A Axle 39mm Round - solid steel - 61" - 1549mm, complete with nut, split pin and washer, 750kg 68.00$








AXS3969-1753T Axle 39mm Round - solid steel - 69" - 1753mm, complete with nut, split pin and washer, 750kg 68.00$











AXLES

32

AXLES - BLACK - 40MM SQUARE- SUIT LM/HOLDEN BEARINGS

PRICE EA


AXS4058-1473A Axle 40mm Square - solid steel - 58" - 1473mm complete with nut, split pin and washer, 1000kg 94.00$

AXS4059-1499A Axle 40mm Square - solid steel - 59" - 1499mm, complete with nut, split pin and washer, 1000kg 94.00$






AXS4065-1651 Axle 40mm Square - solid steel - 65" - 1651mm, complete with nut, split pin and washer, 1000kg 94.00$

































AXLES

33

AXLES - BLACK - 45MM SQUARE- SUIT SL/FORD BEARINGS

PRICE EA

























AXS4581.5-2070A Axle 45mm Square - solid steel - 81.5" - 2070mm, complete with nut, split pin and washer, 1400kg 156.00$



AXS4585.5-2172A Axle 45mm Square - solid steel - 85.5" - 2172mm, complete with nut, split pin and washer, 1400kg 163.00$












AXLES

34

AXLES - GALVANISED

PRICE EA


AXS3960G-1524 Axle 39mm Round - solid steel - 60" - 1524mm, complete with nut, split pin and washer, 750kg GAL 85.00$









AXS4068G-1727 Axle 40mm Square - solid steel - 68" - 1727mm, complete with nut, split pin and washer, 1000kg GAL 143.00$












AXLES

35

STUB AXLES & AXLE ACCESSORIES

PRICE EA


SAX3910 Stub Axle 39mm Round X 10", complete with nut, split pin and washer 12.50$

SAX4010 Stub Axle 40mm Square X 10", complete with nut, split pin and washer 19.70$

SAX4510 Stub Axle 45mm Square X 10", complete with nut, split pin and washer 22.40$

AN34 Axle Nuts 3/4" 0.90$

AW34 Axle Washer 3/4" 0.65$

ASPL Axle Split Pin 0.20$

SPM3.2X36-304S/S Split Pin 3.2mm x 36mm 304 s/steel 0.63$

SPM4X40-304S/S Split Pin 4mm x 40mm 304 s/steel 0.80$

AXLES

SAX3910 SAX4010 SAX4510

AN34

AW34

ASPL

36

SLIPPER SPRINGS - 45mmCentre of eye-bolt hole to tip of spring 765mm unloaded, 6mm thick leafs & 45mm wide

PRICE EA


SS313 Slipper Spring, 3 leaf - black - with 1/2" nylon bush (load rating 600kg per pair) 22.70$





SS313G Slipper Spring, 3 leaf - galvanised - with 1/2" nylon bush (load rating 600kg per pair) 29.10$





SEE DETAILED DIMENSIONS OF THESE SPRINGS IN THE TECHNICAL GUIDE - PAGE 13

SHOCK ABSORBERS

PRICE EA


SHOCKAB-BLKx2 Shock absorber kit (kit of 2) for beam axles - includes left, right & top brackets 178.90$

SPRINGS

SS313 SS513 SS713

SS313G SS513G SS713G

37

EYE TO EYE (SHACKLE) SPRINGS - 45mmCentre of eye to centre of eye 630mm unloaded, 8mm thick leafs & 45mm wide

PRICE EA


EE516-45-630 Eye to Eye Spring, 5 leaf - black - with 5/8" nylon bush (load rating 1200kg per pair) 39.00$

EE616-45-630 Eye to Eye Spring, 6 leaf - black - with 5/8" nylon bush (load rating 1350kg per pair) 41.30$


SLIPPER SPRINGS - 60mmCentre of eye-bolt hole to tip of spring 765mm unloaded, 6mm thick leafs & 60mm wide

PRICE EA


SS513-60 Slipper Spring, 5 leaf - black - with 5/8" nylon bush (load rating 1100kg per pair) 59.90$




OFFROAD SPRINGSCentre of eye to centre of eye 852mm unloaded, 6mm thick leafs & 60mm wide

PRICE EA


EE713-60-OFFROAD 7-Leaf Off Road Spring Set with Anti-Rebound Springs 282.00$

INCLUDES:

1x Left & 1x Right 7-leaf off road spring

4x 5/8" heavy duty 45mm ubolts with nuts & spring washers - black

2x Fishplates - black

2x Spring pads - black

6x Shackle Pins - greaseable

4x Shackle Plates - black

2x Dumbjacks - black

2x Hangers - black


SPRINGS

38

ROCKER ROLLER LOAD-SHARING SPRINGS - TANDEM AXLES

PRICE EA


S5RRA607BRocker Roller Spring Assembly (Full Pair), 5 leaf tandem - black - with shackles and hangers, load rating

2000kg per pair335.00$


2500kg372.00$



S5RRA607GRocker Roller Spring Assembly (Full Pair), 5 leaf tandem- galvanised - with shackles and hangers, load

rating 2000kg per pair521.00$


rating 2500kg582.00$




ROCKER ROLLER LOAD-SHARING SPRINGS - TRI-AXLES

PRICE EA


S5RRA607TBRocker Roller Spring Assembly (Full Pair), 5 leaf tri-axle - black - with shackles and hangers, load rating


S7RRA607TBRocker Roller Spring Assembly (Full Pair), 7 leaf tri-axle - black - with shackles and hangers, load rating


S5RRA607TGRocker Roller Spring Assembly (Full Pair), 5 leaf tri-axle - galvanised - with shackles and hangers, load

rating 2800kg per pair

S7RRA607TGRocker Roller Spring Assembly (Full Pair), 7 leaf tri-axle - galvanised - with shackles and hangers, load


SPRINGS

39

SPRING / AXLE ATTACHMENTS

PRICE EA


FTR-SP916 Shackle Pin 9/16" black with nyloc nut 1.60$

FTR-SP916G Shackle Pin 9/16" black Greaseable with nyloc nut 2.30$

FTR-SP58-45G Shackle Pin 5/8 Greaseable suits 45 & 50mm Springs 3.00$

FTR-SP58-60GM Shackle Pin 5/8 Greaseable suits 60mm Springs 6.05$

SPL50x14-32x8B Shackle Plate 63mm C to C or 50mm RHS x 14mm Holes - Flat 32mm x 8mm - Black 2.20$




SPL78x16-40x8BSSShackle Plate 94mm C to C or 78mm RHS x 16mm Holes - Flat 40mm x 8mm - Black suits

60mm eye to eye springs2.20$

DJ45x7/8 Dumjack - Suits 45mm Wide Spring x 7/8 Nylon Bush 8.25$

DJ60x7/8 Dumjack - Suits 60mm Wide Spring x 7/8 Nylon Bush 8.25$

FSH45 Front Spring Hanger for 45mm wide spring, black 2.70$

FSH50x16 Front Spring Hanger for 45mm wide spring x 5/8 bolts, black 2.70$

FSH60 Front Spring Hanger for 60mm wide spring, black 3.20$

RSH45 Rear Spring Hanger for 45mm wide spring, black 1.90$

RSH60 Rear Spring Hanger for 60mm wide spring, black 2.25$

MSH45 Hanger Deep 1.75" for 45mm wide spring, black 4.75$

SHK45GBGalvanised Spring Hanger Pack for 45mm wide spring - 1x front hanger, 1x rear hanger,

1x eye bolt with nyloc nut9.50$

SP45 Spring Pad - black 0.80$

SP45GB Spring Pad - galvanised 1.80$

NB1/2x7/8x45mm Nylon Bush 1/2 inch x 7/8 inch x 45mm 2.00$

NB5/8x7/8x45mm Nylon Bush 5/8ID x 7/8OD x 45mm Long 2.00$



NB9/16x7/8x45mm Nylon Bush 9/16ID x 7/8OD x 45mm long 2.00$

SPRINGS

SHK45GB MSH45

FSH45

RSH45

SPL78x16-40x8BSS

SP916

SP916G

DJ60x5/8

40

SPRING / AXLE ATTACHMENTS - cont.

PRICE EA


UB24x60SQ-G U-bolt 25mm x 60mm long Square, with nyloc nuts, galvanised 2.50$

UB39 U-bolt 39mm to suit 39mm round axle, with nyloc nuts, black 2.00$

UB39G U-bolt 39mm to suit 39mm round axle, with nyloc nuts, galvanised 115mmL 3.80$

UB40x125SQ-G U Bolt 40mm x 125mm long Square, with nyloc nuts, galvanised 3.80$

UB40 U-bolt 40mm to suit 40mm square axle, with nyloc nuts, black 2.00$

UB40G U-bolt 40mm to suit 40mm square axle, with nyloc nuts, galvanised 115mmL 3.80$

UB45 U-bolt 45mm to suit 45mm square axle, with nyloc nuts, black 2.00$

UB45G-SHT U-bolt 45mm to suit 45mm square axle, with nyloc nuts, galvanised 115mmL 3.80$

UB45G-LNG U-bolt 45mm to suit 45mm square axle, with nyloc nuts, galvanised 130mmL 3.80$




UB50x140SQ U-bolt 50mm x 140mm long Square, with nyloc nuts, black 4.00$



UB50x170SQ-16G U-bolt 50mm x 170mm long Square, 9/16" thick, galvanised 12.10$



UB65x100R-G U-bolt 65mm x 100mm long Square, with nyloc nuts, galvanised 3.90$






NN1/2WHITG Galvanised nyloc nut - 1/2" 0.55$

FTR-BT1235 Bolt 1/2" x 3 1/2" length x 1 1/2" thread Zinc plated with nyloc nut - eye bolt for slipper springs 0.80$

FTR-BT1235G 1/2" x 3 1/2" Galvanised bolt - eye bolt for slipper springs 2.10$

FTR-BT12x160mm Bolt 12mm x 160mm - Stainless Steel grade 8.8 6.05$

FP3950 Fish plate suit 39mm, 40mm & 45mm axles / 45mm springs, black 3.30$

FP3950GFish plate suit 39mm, 40mm & 45mm axles with 45mm springs OR 45mm axle with 60mm springs,

galvanised5.25$

FP3960 Fish plate suit 39mm, 40mm axles / 60mm springs, black 3.90$

FP4560 Fish plate suit 45mm axles / 60mm springs, black 3.90$

FP5060-1/2 Fish Plate suit 50mm axle / 60mm spring, black - suits 1/2 inch U-bolts 3.90$

FP5060-5/8 Fish Plate 50mm axle / 60mm spring, black - suits 5/8 inch U-bolts 8.70$

FP5060-5/8G Fish Plate 50mm axle / 60mm spring, Galvanised - suits 5/8 U-bolt 8.80$

SPRINGS

BT1235

U-BOLTSFISHPLATES

41

50MM TRAILER COUPLINGS & HAND BRAKES

PRICE EA


CAS22 2000kg Painted quick release trailer coupling with adjustable screw - 2 hole 20.20$

CAS22Z 2000kg Zinc plated quick release trailer coupling with adjustable screw - 2 hole 22.00$

CAS32 2000kg Painted quick release trailer coupling - 3 hole 20.20$

CAS32Z 2000kg Zinc plated quick release trailer coupling - 3 hole 22.00$

ORC50G 2000kg Galvanised Mechanical over-ride coupling 69.00$

ORC50LS-T 750kg - 1200kg Painted Light Spring over-ride coupling 92.50$

EC35Z 3500kg Electric coupling zinc plated with adjustable screw & handbrake 75.00$

BR50G Galvanised Over-ride coupling brake arm - boat trailer handbrake 25.00$

BR50G-50 Galvanised Boat Trailer Handbrake - 50mm wide 27.90$

BR50G-100 Galvanised Boat Trailer Handbrake - 100mm wide 38.85$

MBP50G Galvanised Mechanical adaptor plate handbrake - suits over-ride coupling 25.00$

HBR50G Galvanised Hydraulic bracket assembly - suits 3/4" & 7/8" master cylinder 20.00$

COUPLINGS / HITCHES

CAS22Z CAS32

ORC50G

EC35ZMBP50G

HBR50G

BR50G

42

OFF-ROAD COUPLINGS

PRICE EA


PB700-COM 2000kg Over-ride Polyblock coupling with adaptor (PB701) and brake facility 276.20$

PB750-COM 3000kg Swivel polyblock coupling with adaptor (PB701) and no brake facility 266.05$

PB700 2000kg Over-ride Polyblock coupling only with brake facility 196.40$

PB750 3000kg Swivel polyblock coupling only without brake facility 186.20$

PB701 Polyblock Towbar Adaptor only 57.60$

PB703 19mm Locking Pin 19.10$

PB704 Linch pin - to keep Locking Pin (PB703) in place 3.40$

PB706 7/8" x 3" (75mm) Mounting bolt with spring washer and nut - to suit PB701 28.50$

COUPLING MOUNTING BOLTS & BASE PLATES

PRICE EA


CMB152B Coupling hi-tensile mounting bolts, 2 X 1 1/2" X 1/2" - suits 2 hole coupling 6.80$

CMB153B Coupling hi-tensile mounting bolts, 3 X 1 1/2" X 1/2" - suits 3 hole coupling 7.50$

CMB44B Coupling hi-tensile mounting bolts, 4 X 4" X 1/2" - suits over ride coupling 12.45$

CBP2 Coupling base plate, suits couplings with 2 holes 5.00$

CBPV2 Coupling base plate, V shape, suits couplings with 2 holes 6.00$

CBPV3 Coupling base plate, V shape, suits couplings with 3 holes - front:90 x rear:165 x side:150mm 6.00$

CBP4 Coupling base plate, suits over ride couplings 9.70$

CBPVA4 Coupling base plate, V shape, suits over ride couplings 9.70$

SEE DETAILED DIAGRAM OF COUPLING BOLT HOLE CONFIGURATIONS IN THE TECHNICAL GUIDE - PAGE 8

COUPLINGS / HITCHES

PB700-COM

CMB153B CMB44B

CBPV3

CBP2

CBPV2

CBPVA4CBP4

(PB701)

(PB703)

43

DEE SHACKLES, BOW SHACKLES & CHAIN

PRICE EA


FTR-DSG06B Dee shackle - 6mm galvanised 1.60$

FTR-DSG08 Dee shackle - 8mm galvanised 1.15$



FTR-DSG16B Dee shackle - 16mm galvanised 6.20$

FTR-DSS06B Dee shackle - 6mm stainless steel 5.40$




FTR-BSS06B Bow shackle - 6mm stainless steel 5.40$



CHAIN-5LL-G Chain 5mm Gal - per mtr 4.20$

CHAIN-8LL-GChain Rated Long Link 8mm Galvanised - per mtr

1600kg Rating Applies to Single and Double Chains Fitted9.85$





COUPLINGS / HITCHES

DEE SHACKLESBOW SHACKLES

44

LAZY HUBS & DISCS - PLAIN FINISH

PRICE EA


DH58LF 5/8" Disc hub - suits Landcruiser 6 stud - Ford bearings, dust cap, marine seal & nuts 105.60$

CD150 6" hub - suits Holden Commodore - Holden bearings, dust cap, seal & nuts 22.20$

CDF150 6" hub - suits Holden Commodore - Ford bearings, dust cap, seal & nuts 22.20$

GH150 6" hub - suits Holden Gemini - Holden bearings, dust cap, seal & nuts 22.20$

HQ150 6" hub - suits HQ Holden - Holden bearings, dust cap, seal & nuts 22.20$

HQF150 6" hub - suits HQ Holden - Ford bearings, dust cap, seal & nuts 22.20$

HT150 6" hub - suits HT Holden - Holden bearings, dust cap, seal & nuts 22.20$

HTF150 6" hub - suits HT Holden - Ford bearings dust cap, seal & nuts 22.20$

FH150 6" hub - suits Ford - Holden bearings, dust cap & nuts 22.20$

FD150 6" hub - suits Ford - Ford bearings, dust cap , seal & nuts 22.20$

TH150 6" hub - suits Toyota - Holden bearings, dust cap, seal & nuts 22.20$

BH150 6" hub plain - no drilled holes - Holden bearings, dust cap, seal & nuts 26.40$

BF150 6" hub plain - no drilled holes - Ford bearings, dust cap, seal & nuts 26.40$

LH190 7 1/2" hub suits Landcruiser 6 stud- Holden bearings, dust cap, seal & nuts 35.80$

LF190 7 1/2" hub suits Landcruiser 6 stud - Ford bearings, dust cap, seal & nuts 35.80$

LF5-190 8 1/2" hub suits Landcruiser 5 stud - Ford bearings, dust cap, seal & nuts 39.00$

SEE DETAILED DIMENSIONS OF BEARINGS IN THE TECHNICAL GUIDE - PAGE 6

SEE DETAILED DIMENSIONS OF STUD PATTERNS / PCDs IN THE TECHNICAL GUIDE - PAGE 7

HUBS & DISCS

45

LAZY HUBS & DISCS - GALVANISED FINISH

PRICE EA


DH12CDG 1/2" Disc hub - galvanised - suits Commodore - Holden bearings, dust cap, marine seal & nuts 61.10$

DH12CDFG 1/2" Disc hub - galvanised - suits Commodore - Ford bearings, dust cap, marine seal & nuts 61.10$

DH12HQG 1/2" Disc hub - galvanised - suits HQ Holden - Holden bearings, dust cap, marine seal & nuts 61.10$

DH12HQFG 1/2" Disc hub - galvanised - suits HQ Holden - Ford bearings, dust cap, marine seal & nuts 61.10$

DH12HTG 1/2" Disc hub - galvanised - suits HT Holden - Holden bearings, dust cap, marine seal & nuts 61.10$

DH12HTFG 1/2" Disc hub - galvanised - suits HT Holden - Ford bearings, dust cap, marine seal & nuts 61.10$

DH12FHG 1/2" Disc hub - galvanised -suits Ford - Holden bearings, dust cap, marine seal & nuts 61.10$

DH12FDG 1/2" Disc hub - galvanised - suits Ford - Ford bearings, dust cap, marine seal & nuts 61.10$

DH58LFG 5/8" Disc hub - galvanised - suits Landcruiser 6 stud - Ford bearings, dust cap, marine seal & nuts 123.50$

DH12HTG-VELOX 1/2" Disc hub - galvanised - suits HT Holden - Holden bearings, dust cap, marine seal & nuts 104.70$

CD150G 6" hub - galvanised - suits Commodore - Holden bearings, dust cap, marine seal & nuts 29.50$

CDF150G 6" hub - galvanised - suits Commodore - Ford bearings, dust cap, marine seal & nuts 29.50$

HQ150G 6" hub - galvanised - suits HQ Holden - Holden bearings, dust cap, marine seal & nuts 29.50$

HT150G 6" hub - galvanised - suits HT Holden - Holden bearings, dust cap, marine seal & nuts 29.50$

HTF150G 6" hub - galvanised - suits HT Holden - Ford bearings, dust cap, marine seal & nuts 29.50$

FH150G 6" hub - galvanised - suits Ford - Holden bearings, dust cap, marine seal & nuts 29.50$

FD150G 6" hub - galvanised - suits Ford - Ford bearings, dust cap, marine seal & nuts 29.50$

GH150G 6" hub - galvanised - suits Gemini - Holden bearings, dust cap, marine seal & nuts 29.50$

MH140G 6" hub - galvanised - suits Mini - Holden bearings, dust cap, marine seal & nuts 29.50$

TH150G 6" hub - galvanised - suits Toyota - Holden bearings, dust cap, marine seal & nuts 29.50$

LF190G 7 1/2" hub - galvanised - suits Landcruiser 6 stud - Ford bearings, dust cap, seal & nuts 41.00$

BLF190G 7 1/2" hub - galvanised - no drilled holes - Ford bearings, dust cap, seal & nuts 50.10$



HUBS & DISCS

DH12HT-VELOX

46

HUB DRUMS

PRICE EA


HD9X134CD 9" x 1 3/4" Hub drum - suits Commodore stud pattern 63.40$

HD9X134HQ 9" x 1 3/4" Hub drum - suits HQ Holden stud pattern 63.40$

HD9X134HT 9" x 1 3/4" Hub drum - suits HT Holden stud pattern 63.40$

HD9X134F 9" x 1 3/4" Hub drum - suits Ford - Holden stud pattern 63.40$

HD9X134LC 9" x 1 3/4" Hub drum - suits Landcruiser 6 stud pattern 67.80$

HD9X134LC5 9" x 1 3/4" Hub drum - suits Landcruiser 5 stud pattern 67.80$

HD10X2CD 10" x 2 1/4" Hub drum - suit Commodore stud pattern 74.65$

HD10X2HQ 10" x 2 1/4" Hub drum - suit HQ Holden stud pattern 74.65$

HD10X2HT 10" x 2 1/4" Hub drum - suit HT Holden stud pattern 74.65$

HD10X2F 10" x 2 1/4" Hub drum - suits Ford stud pattern 74.65$

HD10X2LC 10" x 2 1/4" Hub drum - suits Landcruiser 6 stud pattern 83.40$

HD10X2LC5 10" x 2 1/4" Hub drum - suits Landcruiser 5 stud - Ford bearings, seal, nuts & dust cover 101.70$

TO ADD BEARINGS, A SEAL, NUTS & A DUST COVER - ADD $13.80 PER DRUM



WHEEL BEARINGS, SEALS, DUST COVERS

PRICE EA


MBK32 Marine bearing kit - Holden - includes: small & large bearings & cups, marine seal 12.90$

MBK35 Marine bearing kit - Ford - includes: small & large bearings & cups, marine seal 12.90$

BK32 Trailer bearing kit - Holden - includes: small & large bearings & cups, standard seal, dust cover 12.30$

BK35 Trailer bearing kit - Ford - includes: small & large bearings & cups, standard seal, dust cover 12.30$

MS32 Holden type marine bearing seal 2.65$

MS35 Ford type marine bearing seal 2.65$

BS32 Holden type standard bearing seal 1.10$

BS35 Ford type standard bearing seal 1.10$

DC45 Zinc plated dust cover 1.00$


HUBS & DISCS

MBK32/35

47

WHEEL STUDS & NUTS

PRICE EA


SN716 7/16" standard coned wheel nuts 0.30$

SN12 1/2" standard coned wheel nuts 0.30$

ST716B 7/16" x 1 5/8" Hub studs & nuts zinc - suits Holden, Toyota, Mini and Datsun - set of 5 9.50$

ST12B 1/2" x 1 5/8" Hub studs & nuts zinc - suits - set of 6 10.10$

MWN7/16P Chrome wheel mag nuts - 7/16" UNF parallel 1.80$

MWN7/16C Chrome wheel lug nuts - 7/16" UNF coned 1.80$

MWN1/2P Chrome wheel mag nuts - 1/2" parallel 1.80$

MWN1/2C Chrome wheel lug nuts - 1/2" UNF coned 1.80$

MWN1.25P Chrome wheel mag nuts - 1.25mm parallel 1.80$

MWN1.25C Chrome wheel lug nuts - 1.25mm coned 1.80$

MWN1.5P Chrome wheel mag nuts - 1.5mm parallel 1.80$

MWN1.5C Chrome wheel mag nuts - 1.5mm coned 1.80$

MNW Mag nut washers 0.30$

SEE DETAILED DIMENSIONS OF THESE NUTS IN THE TECHNICAL GUIDE - PAGE 14

WHEEL BEARING PROTECTORS

PRICE EA


MBP34Chrome finish metal bearing protector - set of 2

Suits hubs with a bore of 45mm inside diameter19.20$

MBC34 Red PVC metal bearing buddy dust cover - set of 2 2.50$

HUBS & DISCS

ST12BMWN7/16CMWN7/16P

SN12

MNW

MBP34

MBC34

48

BRAKE CALIPERS & PARTS

PRICE EA


CM100G Galvanised mechanical caliper complete with pads and mounting bolts - 89.9mm to bolt centres 54.70$

CH200M-M Galvanised hydraulic caliper with pads and mounting bolts - 89.9mm to bolt centres 121.00$

SSSHYD17.5M Stainless Steel Sleeve 17.5mm Suits Hydraulic Calliper 10.30$

SSSHYD18.5T Stainless Steel Sleeve 18.5mm Suits Hydraulic Calliper 10.30$

SSSMECH16.7A Stainless Steel Sleeve 16.7mm Suits Mechanical Caliper 5.50$

CAS10 Cable adjuster - stainless steel fittings and galvanised body 10.50$

BCC4B Brake cable 4mm X 8m, 7X7 galvanised wire cable with 4 clamps to suit 9.50$

BCC04G 4mm galvanised brake cable clamp 0.55$

DP1028 Disc pads (1 pair) to suit caliper - suit mechanical & hydraulic calipers 16.60$

MSK34 3/4" Master cylinder 25.20$

MSK78 7/8" Master cylinder 72.70$

BRAKE BACKING PLATES

PRICE EA


MBP90RA 9" Mechanical Backing Plate, includes mounting bolts & nuts - right hand side 73.00$

MBP90LA 9" Mechanical Backing Plate, includes mounting bolts & nuts - left hand side 73.00$

HB9RM 9" Hydraulic Backing Plate, includes mounting bolts & nuts - right hand side 57.00$

HB9LM 9" Hydraulic Backing Plate, includes mounting bolts & nuts - left hand side 57.00$

EB10RPM-C 10" Electrical Backing Plate, includes mounting bolts & nuts - right hand side 92.50$

EB10LPM-C 10" Electrical Backing Plate, includes mounting bolts & nuts - left hand side 92.50$

BRAKES

MSK34

CM100GCH200M-M

CAS10

BCC4B

DP1028

EB10RPM-C MBP90RAHB9RM

49

BACKING PLATE WELD RINGS & CALIPER MOUNTING PLATES

PRICE EA


MP39 Mounting Plate for 39mm round axle suits mechanical and hydraulic caliper - 1/2" discs 8.70$

MP40 Mounting Plate for 40mm square axle suits mechanical and hydraulic caliper - 1/2" discs 8.70$

MP45 Mounting Plate for 45mm square axle suits mechanical and hydraulic caliper - 1/2" discs 8.70$

MP45R Mounting Plate for 45mm round axle suits mechanical and hydraulic caliper - 1/2" discs 10.30$

MPO39 Mounting Plate Off Centre for 39mm round axle suits mechanical and hydraulic caliper - 1/2" discs 9.00$

MPO40 Mounting Plate Off Centre for 40mm square axle suits mechanical and hydraulic caliper - 1/2" discs 9.00$

MPO45 Mounting Plate Off Centre for 45mm square axle suits mechanical and hydraulic caliper - 1/2" discs 9.00$

MP40DPKG-M Mounting Plate for overlay/drop axles suits mechanical and hydraulic caliper - galvanised - 1/2" discs 9.00$

MPL45 Mounting Plate for 45mm square axle suits mechanical and hydraulic caliper - 5/8" discs 20.00$

MPL50R Mounting Plate for 50mm round axle suits mechanical and hydraulic caliper - 5/8" discs 20.00$

WREM40R Weld Ring to suit Mechanical / Electric Backing Plate 40 Round 6.40$

WREM40S Weld Ring to suit Mechanical / Electric Backing Plate 40 Square 6.40$

WREM45R Weld Ring to suit Mechanical / Electric Backing Plate 45 Round 6.40$

WREM45S Weld Ring to suit Mechanical / Electric Backing Plate 45 Square 6.40$

WRH40R Weld Ring to suit Hydraulic Backing Plate 40 Round 7.90$

WRH40S Weld Ring to suit Hydraulic Backing Plate 40 Square 7.90$

WRH45R Weld Ring to suit Hydraulic Backing Plate 45 Round 7.90$

WRH45S Weld Ring to suit Hydraulic Backing Plate 45 Square 7.90$

WRE50S Weld Ring to suit 12'' Electric Backing Plate 50 Square 16.40$

BREAKAWAY KITS & BRAKE CONTROLLERS

PRICE EA


BAS-EBK24 Electric Breakaway Kit with switch and battery 187.00$

EBC24-I Electric Brake Controller with digital readout 200.40$

BRAKES

BAS-EBK24 EBC24-I

WREM45S WREM40R WRH45SWRH40R

MPL50R MPL45

MP40DPKG-M

MP45MP39

MPO39 MPO45

MPO40

50

WHEEL RIMS

PRICE EA


WHL-RIM-FHT10WG 10" HT (5 stud) Wheel Rim - 4" wide - White Powder Coated & Galvanised 40.50$

WHL-RIM-HT10-VELOX 10" HT (5 stud) Wheel Rim - 3 1/2" wide - Alloy 64.10$

WHL-RIM-FD13-4.5G 13" Ford (5 stud) Wheel Rim - 4 1/2" wide - Galvanised 55.50$

WHL-RIM-FHT13-4.5G 13" MULTIFIT Ford & HT (5 stud) Wheel Rim - 4 1/2" wide - Galvanised 55.50$

WHL-RIM-FD14-6.0G 14" Ford (5 stud) Wheel Rim - 6" wide - Galvanised 60.00$

WHEEL RIMS WITH TYRES

PRICE EA


WHL-RT-HT18/850X8 8" Lawnmower Rim HT (5 stud) & Tyre 18/850x8 91.00$

WHL-RT-FHT10G5in 10" MULTIFIT Rim Ford & HT (5 stud) - 5" Galvanised with Light Truck Tyre 92.00$

WHL-RT-FHT13G155 13" MULTIFIT Rim Ford & HT (5 stud) - 4 1/2" wide Galvanised with 155 Light Truck Tyre 115.50$

WHL-RT-FD14G185 14" Rim Ford (5 stud) - 6" wide Galvanised with 185 Light Truck Tyre 141.00$

TYRES PRICE EA


WHL-Tyre-10-5in 5" wide R10" Light Truck Tyre 57.00$

WHL-Tyre-13-155 155 R13" Light Truck Tyre 60.00$



WHEELS & TYRES

WHL-RIM-FHT10WG WHL-RIM-FHT13-4.5G WHL-RIM-FD14-6.0GWHL-RIM-HT10-VELOX

WHL-RT-HT18/850X8

51

TRAILER RESCUE - SPARE WHEEL HOLDER

PRICE EA


TRF35 Spare wheel and hub/disc holder, suits Ford bearings 49.95$

TRH32 Spare wheel and hub/disc holder, suits Holden bearings 49.95$

WHEELS & TYRES

52

PLASTIC MUDGUARDS

PRICE EA


MGP10S Plastic Mudguard 10" - silver - 175mmW I.D.; 550mmL I.D. 22.65$

MGP10W Plastic Mudguard 10" - white - 175mmW I.D.; 550mmL I.D. 22.65$

MGP13S Plastic Mudguard 13" - silver - 215mmW I.D.; 670mmL I.D. 27.85$

MGP13W Plastic Mudguard 13" - white - 215mmW I.D.; 670mmL I.D. 27.85$

MGP14S Plastic Mudguard 14"-15" - silver - 240mmW I.D.; 750mmL I.D. 32.00$

MGP14W Plastic Mudguard 14"-15" - white - 240mmW I.D.; 750mmL I.D. 32.00$

STEEL MUDGUARDS - SINGLE AXLE

PRICE EA


MGSS8P4B Single Steel Mudguard - black - 8" wide, plain 4-fold - 85Lx20.5Wx23H 19.60$

MGSS10P4B Single Steel Mudguard - black - 10" wide, plain 4-fold - 85Lx35Wx26H 23.35$

MGSS10P4G Single Steel Mudguard - galvanised - 10" wide, plain 4-fold - 85Lx35Wx26H 30.90$

MGSS10CP4B Single Steel Mudguard - black - 10" wide, checker plate 4-fold 42.15$

MGSS11PLC4B Single Steel Mudguard - black - 11" wide Landcruiser, plain 4-Fold 38.30$

MGSS12PLC4B Single Steel Mudguard - black - 12" wide Landcruiser, plain 4-Fold 41.25$

STEEL MUDGUARDS - TANDEM AXLE

PRICE EA


MGTS10x84P4B Tandem Steel Mudguard - black - 10" wide x 84", plain 4-fold - suits slipper spring suspension 43.55$

MGTS10x84P4GTandem Steel Mudguard - galvanised - 10" wide x 84", plain 4-fold - suits slipper spring

suspension63.40$

MGTS10x84CP4BTandem Steel Mudguard - black - 10" wide x 84", checker plate 4-fold - suits slipper spring

suspension77.40$

MGTS10x91P4BTandem Steel Mudguard - black - 10" wide x 91", plain 4-fold - suits rocker roller spring

suspension48.10$

MUDGUARDS

MGP13W MGP13S

MGSS10P4G

MGTS10x84P4G MGTS10x84CP4B MGTS10x91P4B

MGSS11PLC4BMGSS8P4B

53

JERRY CAN HOLDERS

PRICE EA


JCH1020DPremium adjustable, anti-theft / anti-siphon Jerry Can Holder -carries jerry cans up to 355mm(W)

x 180mm (D) x 477mm (H) (jerry can not included!)46.60$

JCH Jerry Can Holder Economy Model - ID 365L x 285H x 175W 18.50$

GAS BOTTLE HOLDERS

PRICE EA


GBH45 Gas Bottle Holder - 4.5kg bottle - suits 260mm diameter bottles 21.10$

GBH4GGas Bottle Holder - Galvanised, zinc plated mounts, Lockable - 4kg bottle - suits 245mm diameter bottles

29.50$

GBH9 Gas Bottle Holder - 9kg bottle - suits 325mm diameter bottles 21.10$

GBH9GGas Bottle Holder - Galvanised,zinc plated mounts, Lockable - 9kg bottle - suits 320mm diameter bottles

29.50$

JERRY CAN & GAS BOTTLE HOLDERS

GBH45 GBH9

JCH

JCH1020D

GBH9GGBH4G

54

JOCKEY WHEELS

PRICE EA


RJW1SU Ezimove Ratchet Jockey wheel 10" solid rubber wheel SWING UP - U-bolt mount 112.50$

RJW2C Ezimove Ratchet Jockey wheel 10" DUAL solid rubber wheels - U-bolt mount on clamp 168.00$

JWN6C Jockey wheel - 6" rubber wheel - bolt on/weld on clamp 40.90$

JWN6S Jockey wheel - 6" rubber wheel SWING UP - bolt on/weld on bracket 45.30$

JWN6SU Jockey wheel - 6" rubber wheel SWING UP - U-bolt bracket 45.30$

JWN8C Jockey wheel - 8" steel rimmed wheel - bolt on/weld on clamp 52.10$

JWN8S Jockey wheel - 8" steel rimmed wheel SWING UP - bolt on/weld on bracket 57.00$

JWN8SU Jockey wheel - 8" steel rimmed wheel SWING UP - U-bolt bracket 57.00$

JW8SHD Heavy-Duty 500kg Jockey wheel - 8" steel rimmed wheel - SWING UP - bolt on/weld on mount 88.00$

JW8SUHD Heavy-Duty 500kg Jockey wheel - 8" steel rimmed wheel - SWING UP - U-bolt mount 88.00$

JWN10C Jockey wheel - 10" solid rubber wheel - bolt on/weld on clamp 58.90$

JWN10S Jockey wheel - 10" solid rubber wheel SWING UP - bolt on/weld on bracket 70.00$

JWN10SU Jockey wheel - 10" solid rubber wheel SWING UP - U-bolt bracket 70.00$

JW10SHD Heavy-Duty 500kg Jockey wheel - 10" steel rimmed wheel - SWING UP - bolt on/weld on mount 120.00$

JW10SUHD Heavy-Duty 500kg Jockey wheel - 10" steel rimmed wheel - SWING UP - U-bolt mount 120.00$

JSN35S Jockey stand SWING UP - bolt on/weld on bracket 47.50$

JSN35SU Jockey stand SWING UP - U-bolt bracket 47.50$

JOCKEY WHEELS & STANDS

JSN35SU

JW10SUHD JW10SHDJW8SUHD JW8SHD

JWN6S JWN6CJWN6SU

JWN10S JWN10SU JWN10C

JS35SU

JWN8S JWN8SU JWN8C

RJW1SURJW2C

55

WIND UP LEGS

PRICE EA


WUL-STANDARD500 Wind Up Legs 500mm 38.50$

WUL-STANDARD740 Wind Up Legs 740mm 45.85$

WUL-BIGFOOT-590 Wind Up Legs 590mm - Comes complete with Bigfoot Load bearing Feet 77.00$

WUL-BIGFOOT-740 Wind Up Legs 740mm - Comes complete with Bigfoot Load bearing Feet 78.85$

WUL-HANDLE Wind Up Leg Handle - suits all above Wind Up Legs - 800mm Long - 19mm Socket 12.00$

JOCKEY WHEEL ACCESSORIES

PRICE EA


NW6 6" Nylon wheel to suit JW6C & JW6S 10.80$

SW8 8" Solid rubber wheel with steel rim 22.70$

SW10 10" Solid rubber wheel with steel rim 39.45$

SCL2 Swivel Clamp - bolt on/weld on mount 13.30$

SCL8 Swivel Clamp - U-bolt mount 13.30$

FCL50 Fixed clamp, bolt on/weld on 9.90$

FCL8 Fixed clamp with 8 holes - suits u-bolts 14.90$

HDL50B Handle to suit all jockey wheels 6.60$

UB2 2" 50mm x 50mm U-bolt with nuts and spring washer - set of 2 5.50$




JOCKEY WHEELS & STANDS

SCL2

SCL8

FCL50

HDL50B

UB4

UB3

UB2

WUL-STANDARD500WUL-STANDARD740

WUL-BIGFOOT-590

WUL-BIGFOOT-740

WUL-HANDLE

56

EZIGUIDES & PROPELLER SAFETY COVER

PRICE EA


EG8 Eziguide - Power Boats - Suits 3.6 to 4.2 mtr Boats (12 to 14Ft) 191.00$

EG8 Eziguide - Sail Boats - 4.2 to 4.8 mtr Boats (14 to 16Ft) 191.00$


EG10 Eziguide - Sail Boats - Suits 4.8 to 6.0 mtr Boats (16 to 20Ft) 191.00$


EG11 Eziguide - Sail Boats - Suits 6.0 to 8.5 mtr Boats (20 to 28Ft) 191.00$

EG13 Eziguide - Power Boats - 6.0 to 8.5 mtr Boats (20 to 28Ft) 201.00$

EG11-SPR Eziguide spare spring - pair to suit all of the above models - please specify which model you need 36.70$

BOW WEDGES / V-BLOCKS

PRICE EA


BR100BLACKV-16 Rubber V-block - Black 100mm 8.00$

BR110BLACKV-12 Rubber Large V-block - Black 110mm 11.70$

BR50REDV-14 Poly V-block - Red 50mm 8.50$

BR70REDV-14 Poly V-block - Red 70mm 14mm hole 11.40$



ROLLERS

BR110BLACKV-12

BR70REDVBR50REDV-14

BR110REDV-20

BR90REDV-16

BR100BLACKV-16

57

POLY SKIDS, STRIPS & BLOCKS

PRICE EA


BR3BLUEMAGSTRIP-45 Magnalene Trailer Strip 45mm x 3m - Blue 23.30$

BR1.5BLUEMAGSTRIP-45 Magnalene Trailer Strip 45mm x 1.5m - Blue 11.65$

BR3REDMAGSTRIP-45 Magnalene Trailer Strip 45mm x 3m - Red 23.30$

BR1.5REDMAGSTRIP-45 Magnalene Trailer Strip 45mm x 1.5m - Red 11.65$

BR-BLUESKID300 300mm Poly Skid - Blue 8.40$

WOBBLE ROLLERS

PRICE EA


BR3x4GREYWOB-25 3" x 4" Grey Poly Wobble Roller - ribbed (25mm hole) 8.40$

BR3x4BLUEWOB-25 3" x 4" Blue Poly Wobble Roller - ribbed (25mm hole) 8.40$

BR3x4REDWOB-25 3" x 4" Red Poly Wobble Roller - ribbed (25mm hole) 8.40$

ROLLERS

BR3x4GREYWOB-25

BR3x4REDWOB-25

BR3x4BLUEWOB-25

BR3REDMAGSTRIP-45BR1.5REDMAGSTRIP-45

BR-BLUESKID300

BR3BLUEMAGSTRIP-45BR1.5BLUEMAGSTRIP-45

58

RED ROLLERS - SOFT, IDEAL FOR FIBRE-GLASS BOATS

PRICE EA


BR-RED-CAP Poly Front End Cap - Red (12mm bore) 3.30$

BR3RED-BR17 3" Bow Roller Poly Soft - Red (17mm) 8.30$

BR4RED-KR17 4 inch Keel Roller Poly Soft - Red (17mm) 9.55$

BR4.5RED-KR17 4 1/2" Keel Roller Poly Soft - Red (17mm) 14.00$

BR6RED-KR17 6" Keel Roller Poly Soft - Red (17mm) 13.80$

BR6RED-SR17 6" Sydney Roller Poly Soft - Red (17mm) 11.00$

BR6RED-SC17 6" Self-centering Roller Poly - Red (17mm) 18.10$

BR8RED-KR17 8" Keel Roller Poly Soft - Red (17mm) 20.10$

BR8RED-CONCA20 8" Concave Roller Poly - Red (20mm) 18.70$

BR8RED-SC17 8" Self-centering Roller Poly - Red (17mm) 25.50$

BR8RED-FLAT20 8" Flat Roller Poly Soft - Red (20mm) 29.30$

BR12RED-CONCA25 12" Concave Roller Poly - Red (25mm) 26.40$

BR12RED-FLAT25 12" Flat Roller Poly - Red (25mm) 34.00$

ROLLERS

BR3RED-CAP

BR3RED-BR17

BR4RED-KR17

BR4.5RED-KR17

BR6RED-KR17

BR8RED-KR17

BR6RED-SR17

BR6RED-SC17 BR8RED-

CONCA20

BR8RED-SC17

BR8RED-FLAT20

BR12RED-FLAT17

BR8RED-CONCA25

59

BLUE ROLLERS - HARD, IDEAL FOR ALLOY BOATS

PRICE EA


BR-BLUE-CAP Poly Front End Cap - Blue (12mm bore) 1.30$

BR3BLUE-BR17 3" Poly Bow Roller - Blue (17mm) 7.00$

BR4BLUE-KR17 4" Poly Keel Roller - Blue (17mm) 6.40$

BR4.5BLUE-KR17 4 1/2" Poly Keel Roller - Blue (17mm) 9.00$

BR6BLUE-KR17 6" Poly Keel Roller - Blue (17mm) 7.20$

BR6BLUE-SR17 6" Poly Sydney Roller - Blue (17mm) 9.40$

BR8BLUE-KR17 8" Poly Keel Roller Blue (17mm) 13.00$

BR8BLUE-SR21 8" Poly Cotton Sydney Roller - Blue (21mm) 13.00$

BLACK RUBBER ROLLERS - ECONOMIC OPTION

PRICE EA


BR3BLACK-BR17 3" Bow Rubber Roller - Black (17mm bore) 2.60$

BR4BLACK-KR17 4" Keel Rubber Roller - Black (17mm) 3.40$

BR4.5BLACK-KR17 4.5" Keel Rubber Roller - Black (17mm) 4.60$

BR6BLACK-KR17 6" Keel Roller - Black (17mm) 6.00$

BR8BLACK-KR17 8" Keel Rubber Roller - Black (17mm) 6.90$

BR4.5BLACK-FLAT-17 4 1/2" Flat/Bilge Roller - Black (17mm)

BR6BLACK-FLAT17 6" Flat/Bilge Roller - Black (17mm) 9.15$


BR6BLACK-SR17 6" Sydney Rubber Roller - Black (17mm) 4.60$

BR8BLACK-CONCA20 8" Concave Rubber Roller - Black (20mm) 6.70$

BR12BLACK-CONCA25 12" Concave Rubber Roller - Black (25mm) 16.80$


ROLLERS

BR6BLUE-SR17

BR-BLUE-CAP

BR4BLUE-BR3BLUE-

BR4.5BLUE-

BR8BLUE-SR21

BR6BLUE-KR17 BR8BLUE-

KR21

1317

BR3BLACK-BR17

BR4BLACK-KR17

BR8BLACK-

BR4.5BLACK-FLAT17

BR6BLACK-FLAT17

BR8BLACK-FLAT17

BR12BLACK-FLAT25

BR12BLACK-CONCA25

BR8BLACK-CONCA20BR6BLACK-

SR17

60

ROLLER BRACKETS & SPINDLES

PRICE EA


BTB-WRB-S Single Wobble Roller Bracket - galvanised - suit 18mm bore 12.00$

BTB-WRBQUAD-40SQ Twin Wobble Roller Holder Assembly - galvanised - suit 18mm bore 22.00$

BTB-WRBTFIXED-22G Double Wobble Roller Bracket - galvanised - 22mm bore 18.60$

BTB-4RBFLAT-16G 4" Flat Bracket - galvanised - 16mm bore 4.75$

BTB-4.5RBFLAT-16G 4 1/2" Flat Bracket - galvanised - 16mm bore 7.50$





BTB-6RB2SPIG-22G 6" Roller Bracket, 2 spigots - galvanised - 22mm bore 9.00$

BTB-8RB2SPIG-22G 8" Roller Bracket, 2 spigots - galvanised - 22mm bore 13.00$

BTB-4.5RB1SPIG18-16G 4 1/2" Roller Bracket, 1 spigot - galvanised - 16mm bore with stem 18mm square 13.50$

BTB-9WYR-G 9" Wood Yoke Bracket, round leg 225mm 10.70$

BTB-8WYSQ-18G 8" Wood Yoke Bracket, square leg 18mm x 200mm 12.10$

BTB-8WYANGSQ-18G 8" Wood Yoke Bracket (angled), square leg 18mm x 200mm 12.10$

BTB-3WELDON-Z 3" Weld on tube support, zinc plated 5.40$

BTB-3BOLTON-G 3" Bolt on tube support, galvanised 11.00$

BTB-40SQRHS-G RHS yoke stem 40mm square, galvanised 13.10$

BTB100x50G Galvanised Boat Trailer Roller Bracket - suit 100mm x 50mm SHS 15.80$







BTB-8RTB-16G 8" Tandem Roller Bracket 20.50$

BTB-EP6-16 Eye Post suits above Tandem Roller Bracket - 6 inches high - 16mm Hole 6.90$



RS4-135-16Z 4" Roller Spindle - zinc plated - 135mm, suits 16mm bore 3.70$

RS4.5-145-16Z 4 1/2" Roller Spindle - zinc plated - 145mm, suits 16mm bore 4.00$




RS12-350-25G 12" Roller Spindle - zinc plated - 350mm, suits 25mm bore 9.50$

ROLLERS

BTB-4.5RB1SPIG18-16G

BTB-8RTB-16G

BTB-WRB-S

BTB-WRBTFIXED-22GBTB-8WYANGSQ-18G

BTB-8WYSQ-18G

BTB-3WELDON-Z

BTB-3BOLTON-G

BTB-40SQRHS-G

ROLLER SPINDLESBTB75x50G

BTB40x40G

BTB100x50G

BTB-4.5RBFLAT-16G BTB-6RBFLAT-16G BTB-8RBFLAT-20GBTB-4RBFLAT-16G

52mm

210mm

BTB-WRBQUAD-40SQ

BTB-EP12-16

BTB-EP6-16

BTB-EP8-16

61

LED & SUBMERSIBLE LED TAIL LIGHTS

PRICE EA


SUBMERSIBLE

LED-TL-1107L LED Submersible Tail Light w/ Round Lens - Left Side 36.00$

LED-TL-1107R LED Submersible Tail Light w/ Round Lens - built in LED Number Plate Light - Right Side 36.00$

LED-TL-1117L LED Submersible Tail Light w/ Oval Lense - Left Side 36.00$

LED-TL-1117R LED Submersible Tail Light w/ Oval Lense - built in LED Number Plate Light - Right Side 36.00$

LED-TL-1133L LED Submersible Tail Light w/ Clear Lense - Left Side 190L x 90W x 49H 38.00$

LED-TL-1133R LED Submersible Tail Light w/ Clear Lense - built in LED Number Plate Light - Right Side 38.00$

LED Submersible Amber Indicator Lamp - Multivolt 12v & 24v - 100mm x 108mm x 32mm $31.80

LED-TL-R-100x108x32-BL LED Submersible Red Tail Light - Multivolt 12v & 24v - 100mm x 108mm x 32mm $31.80

LED Submersible Tail Light - Multivolt 12v & 24v - 100mm x 108mm x 32mm $43.90

LED Submersible Tail Light with Reflector for vertical mounting - Multivolt 12v & 24v -

165 X 100 X 32mm $46.75

LED Submersible LARGE Stop Tail Indicator Lamp with Reflectors each end – White surrounding -

Multivolt 12v/24v - 100mm x 304mm x 47mm$65.95

LED Submersible LARGE Stop Tail Indicator Lamp with Reflectors each end – Black surrounding -

Multivolt 12v/24v - 100mm x 304mm x 47mm $65.95

NON-SUBMERSIBLE

LED-TL-M2910 LED LARGE Tail Light - 10-30V - 300mm x 100mm.. Indicator - stop/tail – reflector – NON-SUBMERSIBLE $99.50

LED-TL-AAC130-D LED Tail Lamp 170L x 90W x 30H – NON-SUBMERSIBLE $24.25

NUMBER PLATE LIGHTS - SUBMERSIBLE

LED-NPL25-APG LED Number Plate Light 13.90$

LED-NPL-TRI-BL LED Number Plate Light – Multivolt 12v & 24v - 90mm x 32mm x 20mm triangle 15.40$

LED-TL-A-100x108x32-BL

LED-TL-AR108x100x32-BL


LED-TL-AR304x100x42-W-BL

LED-TL-AR304x100x47-B-BL

LIGHTS & ELECTRICAL

LED1117L

LED1117R

LED1107L

LED1107R

LED-TL-1133R

LED-TL-1133L

LED-TL-AAC130-D


LED-TL-A-100x108x32-BL

LED-TL-AR304x100x42-W-BL



LED-TL-AR304x100x47-B-BL

LED-TL-M2910

LED-NPL-TRI-BL

62

LED CLEARANCE LAMPS & SIDE MARKERS

PRICE EA


AMBER / RED

LED-CL-TLC1-0.5mt LED Amber / Red Clearance Lamp - clear lens - 400mm lead wire 23.95$

LED-CL-1112TF LED Amber / Red Clearance Lamp 11.00$

LED-CL-AR70 LED Amber / Red Clearance Lamp - Clear Lens – Multivolt 11.00$

LED-CL-ARx2-BL PRICE PER PAIR – LED Amber / Red Clearance Lamp – Multivolt 12v & 24v - 36mm x 77mm x 21mm 23.95$

RED

LED-CL-R70 LED Red Marker - Clear Lens – Multivolt 12.80$

LED-CL-Rx2-BL PRICE PER PAIR – LED Red Marker Lamp – Multivolt 12v & 24v - 36mm x 77mm x 21mm 23.95$

AMBER

LED-CL-1112F-A LED Amber Marker Lamp 8.80$

LED-CL-A70 LED Amber Marker Lamp - Clear Lens – Multivolt 11.00$

LED-CL-Ax2-BL PRICE PER PAIR – LED Amber Marker Lamp – Multivolt 12v & 24v - 36mm x 77mm x 21mm 23.95$

BLUE

LED-CL-Bx2-BL PRICE PER PAIR – LED Blue Marker Lamp – Multivolt 12v & 24v - 36mm x 77mm x 21mm 32.95$

WHITE

LED-CL-C70 LED White Marker - Clear Lens – Multivolt 12.80$

LED-CL-Wx2-BL PRICE PER PAIR – LED White Marker Lamp – Multivolt 12v & 24v - 36mm x 77mm x 21mm 32.95$

LIGHTS & ELECTRICAL

LEDTLC1-0.5mt LED-CL-1112F-A

LED-CL-Ax2-BLLED-CL-ARx2-BL LED-CL-Rx2-BLLED-CL-Wx2-BL

63

OTHER LED LIGHTS

PRICE EA


LED-FLOODB-BL91 LED 12v Flood Lamp - Black Rubber Body Fully Waterproof with Stainless Steel Mounting Bracket

and Bolts$104.50

LED-FLOODW-BL91 LED 12v Flood Lamp - White Rubber Body Fully Waterproof with Stainless Steel Mounting Bracket

and Bolts$104.50

LED-STRIP-150Rx2-BL 6 LED 12v Red Waterproof Strip Lighting with adhesive backing – 150mm long – 2pcs/card $18.60

LED-STRIP-150Wx2-BL 6 LED 12v White Waterproof Strip Lighting with adhesive backing – 150mm long – 2pcs/card $18.60

LED-STRIP-1MTR-R-BL LED 12v Red Waterproof Strip – 1 Meter $88.00

LED-STRIP-400Rx2-BL 15 LED 12v Red Waterproof Strip Lighting with adhesive backing – 400mm long – 2pcs/card $29.60

LED-STRIP-400Wx2-BL 15 LED 12v White Waterproof Strip Lighting with adhesive backing – 400mm long – 2pcs/card $29.60

LED-STRIP-5MTR-W-BL LED 12v DC Cool White Waterproof Strip with adhesive backing - 5 Meter roll $357.50

LED-WORK-W-ROUND78x24-BL 15 LED 12v Work Lamp - round with clear lens - 78mm x 24mm $15.65

LED-WORK-W107x44x24-BL 12 LED 12v Work Lamp - clear lens - 44mm x107mm x 24mm $14.30

LED-WORK-W126x33x42-BL 16 LED 12v Work Lamp Waterproof with 2 meter cable $20.65

LED-WORK-WR-ROUND-BL 30 LED - 15 White & 15 Red – round 12v $32.50

LIGHTS & ELECTRICAL

LED-WORK-W107x44x24-BL

Spinny Things

LED-FLOODB-BL

Spinny Things

LED-FLOODW-BL

LED-WORK-WR-ROUND-BL

LED-WORK-W-ROUND78x24-BL

LED-WORK-W126x33x42-BL

LED-STRIP-150Rx2-BL

64

STANDARD & SUBMERSIBLE TRAILER LAMPS

PRICE EA


TLR984A Rear combination lamp - 12V - left side - acrylic lens w/-globes & connectors 8.50$

TLC984A Rear combination lamp - 12V - right side with number plate lamp - acrylic lens w/-globes & connectors 8.50$

NPL75 Number plate lamp - 12V - bulb included 5.10$

CL70 Red/Amber Clearance Lamp - ADR approved - globes included 8.20$

ASS99 Submersible lamp w/ rectangle lens & outer clear cover, set of 2, in box 41.00$

MAGNETIC LIGHTS

PRICE EA


MLK984 Magnetic Tow Lamp Kit - 2 comb. lamps w/ 8m cable & 7 pin flat plug in carry case 91.20$

LIGHTS & ELECTRICAL

TLR984A TLC984A

NPL75

ASS99

CL70

65

REFLEX REFLECTORS

PRICE EA


RR2070 Red slimline self adhesive reflector - 20mm x 70mm 1.65$

AR2070 Amber slimline self adhesive reflector - 20mm x 70mm 1.65$

CR2070 Clear slimline self adhesive reflector - 20mm x 70mm 1.65$

RR4060 Red self adhesive reflector - ADR approved - 40mm x 60mm 1.65$

AR4060 Amber self adhesive reflector - ADR approved - 40mm x 60mm 1.65$

CR4060 Clear self adhesive reflector - ADR approved - 40mm x 60mm 1.65$

RR2285 Red self adhesive reflector - ADR approved - 22mm x 85mm 1.65$

AR2285 Amber self adhesive reflector - ADR approved - 22mm x 85mm 1.65$

CR2285 Clear self adhesive reflector - ADR approved - 22mm x 85mm 1.65$

RAR2285B 2 x Red & 2 x Amber self adhesive reflectors - ADR approved 4.65$

LIGHTS & ELECTRICAL

##2285

##4060

66

TRAILER PLUGS & SOCKETS

PRICE EA


LPP7 7 pin large round plastic trailer plug 6.30$

LMP7 7 pin large round metal trailer plug 9.10$

LPS7 7 pin large round plastic trailer socket 6.20$

LMS7 7 pin large round metal trailer socket 12.80$

FPP7 7 pin flat plastic trailer plug 5.30$

FSP7 7 pin flat plastic trailer socket 5.90$

PP70 7 pin small round plastic trailer plug 5.10$

MP70 7 pin small round metal trailer plug 8.50$

SP70 7 pin small round plastic trailer socket 8.20$

MS70 7 pin small round metal trailer socket 11.50$

7LS2FP Connects 7 pin large round socket on car to 7 pin flat plug on trailer 15.95$

FS27LP Connects 7 pin flat socket on car to 7 pin large round plug on trailer 15.30$

LIGHTS & ELECTRICAL

PP70

LPS7 LPP7 LMP7LMS7

FPP7

7LS2FP FS27LP

SP70

FSP7

67

SOCKET BRACKETS & ACCESSORIES

PRICE EA


C90 Angle mounting bracket suitable for small round plastic socket 3.60$

M90 Angle mounting bracket suitable for small round metal socket 3.60$

LB90 Angle mounting bracket suitable for large round socket 3.60$

C360 Flat mounting bracket suitable for small round plastic socket 3.60$

LC360 Flat mounting bracket suitable for large round socket 3.60$

PHP7 Flat plug holder 3.00$

BATTERY BOXES & POWERPACK

PRICE EA


PBB32Power Battery Box - with strap - internal size W185 x L325 x H185mm -

all in one power source for use in any situation86.70$

BB27 Standard battery box - internal size W180 x L275 x H250mm - with strap 19.50$

BB32 Large battery box - internal size W185 x L325 x H260mm - with strap 19.50$

ELECTRICAL CABLES

PRICE EA


710M 7 core 2mm x 7 strand trailer cable - PER METRE - Available in continuous lengths up to 100m 1.99$



LIGHTS & ELECTRICAL

PHP7

C360 C90

LC360

LB90

BB32

BB27PBB32

68

HINGES, CATCHES & REGO / COMPLIANCE PLATES

PRICE EA


TGC60L Trailer Tail Gate Catcher - left side 2.20$

TGC60R Trailer Tail Gate Catcher - right side 2.20$

GC15Z Spring-loaded Gate Catcher, zinc plated 2.90$

GC15Z-SO Spring-loaded Gate Catcher, zinc plated - with stay-open catch 4.50$

TGH50 Tail Gate Hinge, small, black - 13mm diameter x 60mm long 1.30$

TGH100 Tail Gate Hinge, large, black - 20mm diameter x 100mm long 1.90$

TGAB19 Tail Gate Anti Rattle Latch, bolt type 3.00$

TGAW19 Tail Gate Anti Rattle Latch, weld type 1.60$

RH12 Registration label holder - plastic 2.00$

RHM Registration label holder - metal 4.20$

CPLATE Compliance plate 7.70$

TOW BALLS

PRICE EA


STB3562 3.5t. - 50mm Stainless steel towball - shank size 7/8" diam. x 62mm 19.90$

TB35C 3.5t. - 50mm Chrome plated towball - shank size 7/8" diam. x 52mm 9.60$

TB5080C 2.5t. - 50mm Chrome plated towball - shank size 7/8" diam. x 80mm 11.90$

TAILGATE ACCESSORIES

TOWBALLS & ACCESSORIES

RH12

STB35B

TGAW19TGAB19

GC15Z TGC60L

TGC60R

TGH100

TGH50

69

SECURITY LOCKS

PRICE EA


CPL10 Trailer Coupling Lock, with pad lock - zinc plated 22.20$

ATL15 Trailer Coupling Lock, with built in lock - Chrome finish 40.30$

ATL155 Trailer Coupling Lock and Hitch pin lock - Chrome finish 56.90$

PL80 Hitch pin Lock- slim line - Suits 2" X 2" class 4 receiver from 65 to 80mm - Chrome finish 23.90$

COVERS

PRICE EA


TP11 Black shin protector 8.50$

PCC50D Clip-on chrome towball cover 2.75$

PBC50D Clip-on black towball cover 2.50$

PVC50D PVC towball cover 2.40$

HCC80 Hitch receiver cover with chrome lid 8.80$

HC80 Black hitch receiver cover 9.10$



ATL15CPL10

PL80

ATL155

HCC80 HC80

TP11

PVC50D PCC50D PBC50D

70

Catalogue

Documents

Transcript of Catalogue