Catalogue 2019 - Home - Quantium Medical...A. qCON sensor new 26 B. qCON sensor 27 C. qCON cable...
Transcript of Catalogue 2019 - Home - Quantium Medical...A. qCON sensor new 26 B. qCON sensor 27 C. qCON cable...
-
Prod
uct C
atal
ogue
. Jun
e 20
19. E
d. 1
.0. E
N.
Contact Quantium Medical S.L.U
Av. Ernest Lluch 32, Tower 2, TecnoCampus, Floor 3, Office 3.16, 3.17, 3.18.08302 Mataró, Spain
+34 93 702 19 50 www.quantiummedical.com
Catalogue 2019Products & Accessories
http://www.quantiummedical.com
-
2 3
Table of Contents1. Overview of Depth of Anaesthesia 4
2. Overview of Non-invasive cardiac output 5
3. Hospitals and clinics 6
A. Conox 8
B. Conox Lite 10
C. qCON2000 12
D. qCO 14
E. QM3100 / QM3101 16
4. Manufacturers 18
A. qCON3000 OEM 20
B. qCO OEM 22
5. Accessories 24
A. qCON sensor new 26
B. qCON sensor 27
C. qCON cable patient new 28
D. qCON cable patient 29
E. EEG simulator 30
-
4 5
The qCO monitor in a non-invasive tool aimed to evaluate the Cardiac Output (CO) of the patient. The monitoring is performed through four electrodes placed on the patient's thorax. The obtained impedance signal is used to calculate several indexes related to blood flow without intepreting data (i.e., any interpretation of the data must be performed by a doctor).
Among these indexes, the CO, the Stroke Volume (SV) and the Heart Rate (HR) can be calculated by the monitor. All of them are haemodynamic parameters related to vital sings.
Overview of Non-invasive Cardiac Output Monitoring
Overview of qCON-qNOX TechnologyGeneral anaesthesia is a combination of several types of drugs such as hypnotics, analgesics or muscle relaxants, among others. Achieving an appropriate balance of these components during surgical procedures is desirable. For this purpose, qCON-qNOX technology calculates two continuous processed EEG parameters:
qCON index
The qCON index has a value between 0 and 99, and assesses the patient's state of consciousness. A qCON index around 99 means the patient is awake, while a qCON index around 0 indicates no cortical activity (isoelectric EEG).
qNOX index
qNOX is an index from 0 to 99 that correlates to the patient’s responsiveness level. The higher the qNOX index is, the higher the probability of response to noxious stimuli the patient has.
Both indices are based on the combination of different frequency bands calculated from the raw frontal electroencephalogram which is the graphic representation of the bioelectrical activity of the brain.
In addition to qCON and qNOX, the following parameters are also calculated.
Electromyogram (EMG)
The EMG index reflects the activity of the patient's facial muscles. EMG activity may increase due to reflex reactions to painful stimuli during surgery, muscular activity or muscular rigidity.
Burst Suppression Ratio (BSR)
The burst suppression is an EEG pattern characterized by periods of bursts, followed by periods of suppression. The BSR provides a measure of the percentage of flat EEG observed in the last 30 seconds.
Signal Quality Index (SQI)
The Signal Quality Index (SQI) reflects the incidence of artifacts on the EEG and indicates how reliable the indexes are in every moment.
Impedance
The Impedance is a measure of the resistance between the sensor and the skin. The lower the impedance, the better.
-
6 7
Solutions for Hospitals & Clinics
-
8 9
NEWComing soon
General specificationsEEG resolution 44.58nV
Noise < ± 6 μVp-p (BW 70 Hz)
CMRR > 100 dB
Input impedance > 1 MΩ (@10 Hz)
Sampling frequency 1024 samples/s, 24 bits/sample
Input signal range ± 374 mV
Dimensions 215 x 150 x 65 mm
Screen 154.08 x 85.92 mm
Weight 785 g
Battery 2.5 h
Bluetooth 2.1, selectable, send only, range up to 10 m
Power supply 5V DC, 2.0 A, 10W
Box contentsUsability
Non-invasive monitoring.
Touch screen with direct access to the monitor functions.
Friendly and intuitive graphical interface.
On demand sensor impedance test and automatic test every 15 minutes.
Lead off detection.
Easy implementation in hospitals and clinics.
Artifact rejection
Surgical areas and ICU environments
Conox
Conox USB
Patient cable Conox sensor
5 x
Reliability and Stability
Fast detection of patient’s state during intravenous and inhaled anaesthesia.
Stable and reliable monitoring, helping anaesthesiologists to reduce risks associated with anaesthetics.
Optimization of the dosing of hypnotics and analgesics.
Portable
Compact and lightweight design.
Easy attachment with a 360° pole clamp.
Bluetooth connectivity.
5 x
Distributed through
• Copy of the CE Mark • Declaration of Conformity of Conox • IFU (20 languages) • ConoxView
• Declaration of Conformity of the sensor • ISO 13485 • ISO 9001
Power supply & cable
-
10 11
General specificationsEEG resolution 44.58nV
Noise < ± 6 μVp-p (BW 70 Hz)
CMRR > 100 dB
Input impedance > 1 MΩ (@10 Hz)
Sampling frequency 1024 samples/s, 24 bits/sample
Input signal range ± 374 mV
Dimensions 145 x 125 x 60 mm
Weight 410 g
Battery NA
Bluetooth NA
Power supply 5V DC, 2.0 A, 10W
Box contents
USB
• Copy of the CE Mark • Declaration of Conformity of Conox lite • IFU (20 languages)
• Declaration of Conformity of the sensor • ISO 13485 • ISO 9001
Usability
Non-invasive monitoring.
Automatic Impedance test.
Lead off detection.
Rejection of artifacts.
Surgical areas and ICU environments.
Fully portable solution
Conox lite
Conox lite
Reliability and Stability
Fast detection of patient’s state during intravenous and inhaled anaesthesia.
Stable and reliable monitoring, helping anaesthesiologists to reduce risks associated with anaesthetics.
Optimization of the dosing of hypnotics and analgesics.
Portable
Compact and lightweight design.
Easy attachment with a 360° pole clamp.
Patient cable Conox sensor
5 x
5 x
NEW
Distributed through
Power supply & cable
Coming soon
-
12 13
General specificationsEEG resolution 15.3 nV
Noise < 2 μVp-p (1-43 Hz)
CMRR > 100 dB
Input impedance > 1 MΩ (@10 Hz)
Sampling frequency 1024 samples/s, 16 bits/sample
Input signal range ± 475 μV
Dimensions 145 x 125 x 70 mm
Screen 95 x 53 mm
Weight 425 g
Battery3.7 Volts Li-ion batteryCapacity 3500 mAhRechargeable
Communication: Bluetooth Range up to 10 m
Power supply 5V DC, 2.0 A, 10W
qCON 2000 IFU
Power supply & cable
Patient cable qCON sensor
5 x
qCON 2000Usability
Non-invasive monitoring.
Touchscreen with pinch in/out capability.
Friendly graphical user interface.
Automatic impedance test every 15 minutes.
Lead off detection.
Easy implementation in hospitals and clinics.
Reliability & Stability
Fast detection of patient’s state during intravenous and inhaled anaesthesia.
Stable and reliable monitoring, helping anaesthesiologists to reduce risks associated with anaesthetics.
Optimization of the dosing of hypnotics and analgesics.
Portable
Compact and lightweight design.
Easy attachment.
Bluetooth connectivity.
Box contents
• Copy of the CE Mark • Declaration of Conformity of qCON2000 • IFU • qCON-NOX Display
• Declaration of Conformity of the sensor • ISO 13485 • ISO 9001
USB
-
14 15
General specificationsInput impedance 0-100 Ω
Sampling frequency 250 samples/s, 32 bits/sample
Bandwidth 0.1-120 Hz
CO range 0 - 20 l /min
SV range 0 - 200 ml
HR range 0 - 150 beats/min
Dimensions 145 x 125 x 70 mm
Display 95 x 53 mm
Weight 375 g
Wireless NA
Power supply 5V DC, 2.0 A
Box contents
qCO
Patient cable Electrodes
25 x
qCOKey features
Non-invasive monitoring.
Fast index update rate.
Advanced digital signal processing of the thoracic impedance.
Innovative algorythm in the artifact rejection.
Add-on functionality for HRV analysis.
Fully portable solution.
Attractive and user friendly Graphical User Interface (GUI) design with sharp colour visuals.
Touchscreen with pinch in/out capability.
Easy implementation in hospitals and clinics.
Portable
Compact and lightweight design.
Easy attachment.
Bluetooth connectivity.
IFU
• Copy of the CE Mark • Declaration of Conformity of qCO • IFU
• Software qCO Display • ISO 13485 • ISO 9001
USB
Power supply & cable
-
16 17
General specifications
EEG resolution 44.58nV
Noise < ± 6 μVp-p (BW 70 Hz)
CMRR > 100 dB
Input impedance > 1 MΩ (@10 Hz)
Sampling frequency 1024 samples/s, 24 bits/sample
Input signal range ± 374 mV
Dimensions 145 x 125 x 60 mm
Weight 410 g
Wireless NA
Power supply 5V DC, 2.0 A, 10 W
Box contents
Usability
Non-invasive monitoring
Automatic impedance test
Lead off detection
Rejection of artifacts
Fully portable solution
Surgical areas and ICU environments
QM3100 / QM3101
QM3100/QM3101
Reliability & Stability
Fast detection of patient’s state during intravenous and inhaled anaesthesia.
Stable and reliable monitoring, helping anaesthesiologists to reduce risks associated with anaesthetics.
Optimization of the dosing of hypnotics and analgesics.
Portable
Compact and lightweight design.
Easy attachment.
Power supply & cable
Patient cable qCON sensor
5 x
IFU
• Copy of the CE Mark • Declaration of Conformity of QM3100/QM3101 • IFU
• Software qCON-NOX Display • ISO 13485 • ISO 9001
USB
-
18 19
Solutions for Manufacturers
-
20 21
General specifications
EEG resolution 44.58nV
Noise < ± 6 μVp-p (BW 70 Hz)
CMRR > 100 dB
Input impedance > 1 MΩ (@10 Hz)
Sampling frequency 1024 samples/s, 24 bits/sample
Input signal range ± 374 mV
Dimensions 70.08 x 60.15 x 20 mm
Power supply 5V DC, 2.0 A, 10W
Box contents
qCON 3000 OEM
qCON 3000 OEMManufacturers
Turnkey solution for monitor manufacturers.
Easy integration thanks to its compact design.
Simple communication protocol with USB/RS232 connection.
Fast index update rate.
Innovative algorithm in the artifact rejection.
Advanced digital processing algorithm, requiring one single EEG channel.
Added value for existing and new monitors.
Hospitals and clinics
Easy to use and interpret.
Reduce cost and space.
High stability and reliability level.
Monitoring of hypnosis and nociception in one single device.
Monitoring of hypnosis and nociception from only one sensor.
Optimization of the dosing of hypnotics and analgesics.
Fast index update rate.
IFU
• Copy of the CE Mark • Declaration of Conformity of qCON 3000 OEM • IFU
• Software qCON-NOX Display • ISO 13485 • ISO 9001
USB
Power supply & cable
Patient cable qCON sensor
5 x
-
22 23
General specifications
Input impedance 0-100 Ω
Sampling frequency 250 samples/s, 32 bits/sample
Bandwidth 0.1-120 Hz
CO range 0 - 20 l /min
SV range 0 - 200 ml
HR range 0 - 150 beats/min
Power supply 5V DC, 2.0 A, 10 W
Box contents
qCO OEMKey features
Monitoring of Cardiac Output and HRV analysis in one single device.
Very simple communication protocol with USB/RS-232 connection.
Easy integration thanks to its compact design.
Advanced digital signal processing of the thoracic impedance.
Fast index update rate.
Innovative algorithm in the artifact rejection.
Added value for existing and new monitors.
Turnkey solution for monitor manufacturers.
qCO OEM
USB cable
IFU
• Copy of the CE Mark • Declaration of Conformity of qCO • IFU
• Software qCO Display • ISO 13485 • ISO 9001
USB
Patient Cable Electrodes
25 x
Power supply & cable
-
24 25
Accessories
-
26 27
Conox sensor
NEW
General specifiations
Box containing 50 sensors
Dimensions 30cm x 6cm
Gel type Semi-liquid
Material Silver-silver chloride
Minimum shelf life Two years without opening
Packaging 35cm x 9 cm
Package weight 16 gr
Application EEG Signal
Usage time 24 h
qCON sensor
General specifiations
Box containing 50 sensors
Dimensions 30cm x 6cm
Gel type Semi-liquid
Material Silver-silver chloride
Minimum shelf life Two years without opening
Packaging 35cm x 9 cm
Package weight 16 gr
Application EEG Signal
Usage time 24 h
Conox lite Conox qCON 2000 QM3100 / QM3101
qCON 3000 OEM
Compatible devices
Conox lite Conox
Compatible devices
Distributed through
-
28 29
Conox patient cableNEW
General specifiations
Box containing Patient cable
Patient cable length 2 m
Compatible devices
qCON sensor NEW
General specifiations
Box containing Patient cable
Patient cable length 2 m
Compatible devices
qCON patient cable
qCON sensor
Conox lite Conox Conox lite Conox qCON 2000 QM3100 / QM3101
qCON 3000 OEM
Distributed through
-
30 31
General specifiations
Box containing Power supply & power cableIFUSimulator cable
Input 100-240 V, 50-60 Hz
Output +5V @ 2A DC
Maximum power consumption 10 W
Battery 6LR61 (9V)
Cortex M3 processor 32-bit ARM Cortex-M3 microprocessor
Indicators 4 LEDS to indicate the four states of the signal
Compatible devices
EEG simulator
Conox lite Conox qCON 2000 QM3100 / QM3101
qCON 3000 OEM
-
32 33
References
-
34 35
qCON2000 • Monitor • 5 • • • QM2000-M
qCON2000 • • Monitor • 5 • • • QM2000-M
qCO • Monitor • 25 • • • QM5000-M
QM3100 • Monitor • 5 • • • QM3100
QM3101 • • Monitor • 5 • • • QM3101
Solutions for Hospitals & Clinics
Solutions for Manufacturers
Description Reference
qCON sensor Box of 50 units QM-ACS-010
qCON patient cable 1 unit QM-ACS-009
Power supply 1 unit QM-ACS-004
Skin prep bag 1 unit QM-ACS-005
Tone generator Tone generator and Power supply QM-ACS-006
Pole clamp 1 unit QM-ACS-007
Accessories
qCON3000 • OEM • 50 • QM3000
qCON3000 Starter Kit • OEM • 50 • • •
QM3000 Starter Kit
qCON3001 • • OEM • 50 • QM3001
qCON3001 Starter Kit • • OEM • 50 • • •
QM3001 Starter Kit
qCO OEM • OEM • QM5000
qCO OEM pack • OEM • 25 • •
QM5000 pack
qCON
qNOX
Card
iac
Outp
utSo
lutio
n
Patie
nt ca
ble
Sens
ors
Pow
er s
uppl
y
& ca
ble
IFU
USB
Conn
ectiv
ity
sup
port
Refe
renc
e
qCON
qNOX
Card
iac
Outp
utSo
lutio
n
Patie
nt ca
ble
Sens
ors
Pow
er s
uppl
y
& ca
ble
IFU
USB
Conn
ectiv
ity
sup
port
Refe
renc
e
-
Contact Quantium Medical S.L.UAv. Ernest Lluch 32, Tower 2, TecnoCampus, Floor 3, Office 3.16, 3.17, 3.18.08302 Mataró, Spain+34 93 702 19 50 www.quantiummedical.com