CATALOGUE 2017 - Pijpdakventilatorpijpdakventilator.nl/.../2017/02/Vilpe-catalogus-2017.pdf ·...

CATALOGUE 2017

2

In 2017 Finland celebrates its 100 years of independence. Adding to the celebration is the fact that the European construction sector seems to be on a rise across the continent. Our own organization can also be proud of the new innovations we have brought to our partners because successful R&D is the growth engine for future development. However, we haven’t always been the most vocal player on the market or very advertising focused which may come from our shy Finnish heritage. We haven’t done a great job of promoting our story and promoting our solutions. This is something we want to change together with our partners.

We as an organization believe strongly in increasing the quality of life through new innovations in construction. Annually we spend over 5 % of our turnover on research and development and this year we are further expanding our innovation process. R&D is our key for

success and growth and at the heart of our organization. Combining research with accurate market data and co-development of new solutions together with our partners is our focus for 2017. Together with our partners both new and existing we can share our story and our expertise in roofing and ventilation to bring new concepts to the market to ensure our growth.

So 2017 is about celebrating our history and our success. But more than anything 2017 is for us a year when we will invest more than ever in new innovations and in new advertising and communications methods with our partners. We will not stand idle without course or function. This is the beginning of our future story and we couldn’t be more excited about it.

Welcome to the new world of VILPE® innovations in 2017!

Sincerely, SK Tuote Oy

Partnerships lead to success

INSTALLERRegister the roof fan for an extended 5 year guarantee

Download VILPE app for Android or iOS and fill in the information.

Further information:

BEFO

RE IN

STAL

LATIO

N,

REMO

VE LA

BEL

3

Why VILPE®?

The most extensive range of products and optimal storabilityAlternatives for all types of roofingComplete sets: installation tools and instructions included, guarantees for VILPE® assembliesInstallation: quick and easyFunctionality: totally waterproof end resultAesthetics: harmonious design and colours that go well with roofing materialsDurability: 40 years of manufacturing experienceExceptionally long warranty

GuaranteedVILPE® quality: - 10 year aesthetic guarantee - 20 year technicalguarantee- 2 + 3 year guarantee forelectrical parts

Bringing better indoor air quality, energy efficiency and longevity of structures to all spaces.

4

Contacts

Sales and Technical support Tel. +358 20 123 3222 Fax +358 20 123 3218 E-mail [email protected]

Tuomas Saikkonen, Sales Director +358 20 123 3284

Carina Lagerström, Assistant Export Manager +358 20 123 3220Western Europe

Elina Primetta, Export and Marketing Assistant +358 20 123 3244Europe

Leif Fredriksson, Sales Manager, Sweden +46 733 869 420 Nisse Hedberg, Salesman, Sweden +46 70 511 20 20

Jonas Ryden, Salesman, Sweden +46 70 770 18 91 Lena Viskari, Export Manager, +358 20 123 3252Eastern and Central Europe

Ella Osipova, Export Manager +358 20 123 3213Russia and CIS countries

Larissa Okhotnikova, Export Assistant +358 20 123 3217Russia and CIS countries

Enna Moshnikova, Export Assistant +358 20 123 3242Russia and CIS countries

Janis Abolins, Sales Manager +371 22 305 950Baltic states

Sales and Technical Support

+358 20 123 3222 [email protected]

5

Table of Contents

VILP

E®TE

CHN

ICAL

DAT

AVI

LPE®

FAS

TEN

ERS

New productsP-series pass-throughs 8KTV ventilation sets 13

Ventilation pipes 14

Ventilation of structures 16

End caps 17

Exhaust ventilation pipes 18

Roof fans 20

Roof fan controllers 24

Roof fan service sets 24

Chimney fan 24

Intake-vents 25

Roof hatches 25

Solar pass-throughs 26

Aerial sleeves and pipe pass-throughs 27

Flue joints 27

Chimney pass-throughs 28

Ross ventilation poles 30

Multifunction grilles 32

Felt and metal roof pass-through seals 33

Vapour barrier seals 34

PVC roof pass-through seals 34

Alipai underpressure vents 34

Roof drains 35

Fasteners 37

RKL brick wall fastener 37

NV distance piece 37

Washer 37

Power A + tools 38

Croco-512 + tools 38

Croco B and Croco A + tools 39

Selection table, Croco B 40

Croco nails and screws 41

Maximal roof pitches and VILPE® colours 42

C-series schematics 42

Quick selection for roof fans 43

Technical information for roof fans 44

Maximum capacity of roof fans and exhaust vents 45

Airflow information for Multifunction grille 46

Airflow information for Ross ventilation poles 46

General Terms of Sale 47

Classic Vino 2Kp. 8

Intake-ventp. 25

ECo familyp. 7

Product listings

Colour All our standard colours are depicted on page 40. Due to printing technicalities, the images and colours may deviate slightly from reality. Psc/pack How many items a pack contains. The number ordered must be divisible with this number. Psc/pallet How many items a pallet contains. Our pallets are EUR pallets (80 x 120 cm) with height of 120 cm unless stated otherwise.

Delivery Stock/Order. Order means the product is manufactured only when ordered, which lengthens the delivery time slightly.

-symbol The XL roof fans, exhaust vents and pass-throughs have now been marked with this symbol to make it easier to gather a product ensemble.

2K pass-through seriess. 8

6

The P-series roof fans and exhaust ventilation pipes can be led watertightly with a pass-through set through a roof. VILPE® pass-through sets can be installed on any roofs with the most common pitches (less than 50 degrees). The pass-through set is always selected according to the roofing material of the roof. All the roof fans and exhaust ventilation pipes in the P-series are compatible with all pass-through set types. Using P-series XL roof fans and XL exhaust ventilation pipes requires an XL pass-through.

P-series for pitched roofs

S-series for flat surface installationThe S-series roof fans and exhaust vents are designed to be installed in the ventilation shaft, onto a silencer or in or other horizontal surface. Thus, they are also suitable for gently sloping roofs. The S-roof fans and S-exhaust vents are used, for example, in blocks of flats and terraced houses, when flat-specific ventilation is required. The S-series roof fan can also be used for modifying an old natural ventilation system into a mechanical one during renovation.

C-series for handmade/ pre-bent steel conesThe C-series roof fans and exhaust ventilation pipes are used in the same way as P-series products in solutions where the pipe is led through a roof and a cone. The difference is that the C-series fans and exhaust ventilation pipes are installed on top of the sheet metal cone made by a sheet metal worker on the roof. The diameter of the upper part of the sheet metal cone has to be either Ø 170 mm or 315, according to the size of the roof fan or ventilation pipe.

Products for low-pitched roofsThe VILPE® product family includes a wide selection of fasteners, seal-ings and underpressure vents for needs of various roofings. The Felt pass-throughs (tall) enable installing all the roof fans and exhaust ventilation pipes with diameter of 100–250 mm on low-pitched roofs. The backwater heights of pass-throughs are all according to regulations.

VILPE® solutions

The VILPE® product family includes a complete selection of roof elements and terminal equipment for ventilation. VILPE® products form ensembles easy to assemble since all the installation tools and instructions are included in the sets. Uniquely long warranties only apply to ensembles with genuine VILPE® products.

P-series for pitched roofs

Products for low-pitched roofs

S-series for flat surface installation

C-series for handmade/pre-bent steel cones

• Roof fans, ECo roof fans• Exhaust ventilation pipes• Sewer ventilation pipes• Roof vents• Aerial sleeves• Radon fans• Ross ventilation poles• Ventilation grilles• Roof hatches• Solar pass-throughs• Chimney pass-throughs• Air intake vents

7

VILPE® ECo series roof fans are effectively controllable DC motor roof fans. Thanks to their superior efficiency and optimisable control system, they consume considerably less energy than AC motor fans.

UsageVILPE® ECo series roof fans with DC motors are used as a part of the ventilation system for targeted exhaust ventilation in kitchens or bathrooms in residences, offices, places of business and manufacturing, halls and public spaces, to name a few. In blocks of flats the ECo roof fans are suitable for targeted exhaust ventilation of lift shafts and other common spaces. Other usages include the ventilation of building base floors, removal of the unhealthy radon gas and targeted ventilation in garages and storage rooms.

The superior ECo seriesRemote control with a 0–10V voltage message makes the ECo series easy to integrate into a building technology system. As an improvement to previous VILPE® roof fans, VILPE® ECo fans can be provided with remote control system which uses a standard 0–10V voltage message. The output signal enables connecting the roof fan with an auto-matically controlled building technology system, allowing the roof fan to be monitored and controlled via the central unit.

DC motor saves energyVILPE® ECo roof fans address the challenge of reducing total energy consumption by saving energy; DC motors consume less than AC motors to produce the same output. According to calculations indicating the amount of power needed to carry air, the VILPE® ECo roof fan saves energy considerably.

VILPE® ECo conform to the requirements given in the following EU directives: energy label (EU) 1254/2014, ecodesign (EU) 1253/2014, ecodesign (EU) 327/2011, Electromagnetic Compatibility (EMC) Directive 2014/30/EU, The Low Voltage Directive (LVD) 2014/35/EU 2014/35/EU, RoHS directive 2002/95/EC, WEEE directive 2002/96/EC.

The VILPE® ECo roof fans with a DC motor are marked with this symbol:

VILPE® ECo family VILPE®

Innovation and energy-efficiency in ventilation

VILPE® ECo Monitor

For monitoring and control of VILPE® ECo roof fans.

Can monitor rotation speed signals from 1 - 5 fans. Isolated alarm output and a faulty fan LED.

Optional 0 - 10 V input for speed control, adjustable by an internal trimmer from 0 – 100 %.

10 V 1 mA operating voltage that can be provided from the fan (Patent 2431303).

Read more on page 24.

VILPE® ECo Ideal Wireless ventilation control

- a smart method of demand-controlled ventilation that automatically maintains ideal air quality in any space

- based on wireless communication, which makes it cost-efficient and easy to retrofit

- brings remarkable savings in energy consumption and costs

Available from Q2/2017.

• User panel

• Control unit

• Humidity sensor

• CO2 sensor

NEW VILPE® SOLUTIONS:

8

Colour Pakkaus Kpl/lava Toimitus Tuotenro

Black 1 24 Stock 746002

Brown 1 24 Stock 746004

Green 1 24 Stock 746006

Grey 1 24 Stock 746007

Red 1 24 Stock 746008

Brick Red 1 24 Stock 746009

Light Grey 1 24 Stock 746001

VILPE® Classic Vino 2K pass-through

Usage: Plain standing seam roofing or if retrofitted, also felt roofing. Thick rubber seal on the bottom of the flange. Sealing compound (not incl.) required on felt roofing. Replaces VILPE® Classic 2K pass-through. Contents: Pass-through, underlay 2K seal, screws, installation instructions/templates for the underlay seal and the pass-through.

Colour Pakkaus Kpl/lava Toimitus Tuotenro €/kpl ALV 0%

Black 1 24 Stock 740742 84,00

Brown 1 24 Stock 740744 84,00

Green 1 24 Stock 740746 84,00

Grey 1 24 Stock 740747 84,00

Red 1 24 Stock 740748 84,00

Brick Red 1 24 Stock 740749 84,00

VILPE® Aalto 2K pass-throughUsage: Ruukki´s Adamante or similar metal sheet roofing. Contents: Pass-through, underlay 2K seal, sealing compound, screws, installation instructions/templates for the underlay seal and the pass-through.

Colour Product No.DeliveryPcs/palletPcs/pack

P-series pass-throughs: Ø 75 - 160 mm

2K pass-through series

New Underlay 2K Seal—100% watertight solution

A totally novel, two-component Underlay 2K Seal works through the rainiest days: since the 2K seal straddles the underlay and the top of the pass-through seamlessly, it prevents any rainfall or snow reaching roof structures or the insulating material. The new Underlay 2K Seal is henceforth included in most common VILPE® pass-through sets.

Benefits of Underlay 2K Seal

The Underlay 2K Seal is the only solution that makes sure that the pass-through fit is completely waterproof.

Works well with breathing underlay materials.

As easy to install as the VILPE® Underlay Ring currently in use.

Patented solution.

9

VILP

E®




Green 1 18 Order 300006


Red 1 18 Stock 300008


Light Grey 1 18 Order 300001

VILPE® Tile 2K pass-through

Usage: The most common concrete tile roofing types. Replaces one 2-wave concrete tile up to width 330 mm and wave height 27–40 mm. Contents: Pass-through, underlay 2K seal, screws, installation instructions/template for the underlay seal and the pass-through.


Brick Red 1 18 Order 300029


VILPE® Vittinge 2K pass-throughUsage: Vittinge clay tile roofing. Contents: Pass-through, underlay 2K seal, screws, installation instructions/templates for the underlay seal and the pass-through.



Brown 1 12 Order 300014



Red 1 12 Stock 300018


VILPE® Universal 2K pass-through

Usage: All tile roofings (ceramic, clay, concrete and special tiles, 1- and 2-wave tiles and plain tiles) Contents: Pass-through, underlay 2K seal, upper edge seal set, bottom bracket, screws, installation instructions/template for the underlay seal and the pass-through.






Red 1 24 Stock 300038


VILPE® Profiled steel 2K pass-throughUsage: All round profiled metal sheet roofing types (tile-patterned). Minimum length of tile pattern 350 mm. Mouldable and fully waterproof thanks to the rubber seal on the bottom surface. Contents: Pass-through, underlay 2K seal, sealing compound, screws, installation instructions/templates for the underlay seal and the pass-through.

2K pass-through series

Colour Toimitus Tuotenro

Black Stock 73212

VILPE® Underlay 2K seal

Usage: Fastened to the roof battens and extended to the upper edge of the pass-through, ensures complete water-tightness of the gap between the underlay and the roofing material. Contents: Underlay 2K seal, screws, installation instructions/templates for the underlay seal.


Colour

1-waved (E13)

2-waved (T11)

10






Red 1 24 Stock 74015



VILPE® Concrete tile pass-through

Usage: The most common concrete tile roofing types. Replaces one 2-wave concrete tile with width of 330 mm and wave height of 27–40 mm. Contents: Pass-through, underlay ring, screws, installation instructions.






Red 1 20 Stock 792108


VILPE® Universal pass-through

Usage: All tile roofing types (ceramic, clay, concrete and special tiles, 1- and 2-wave tiles and plain tiles). Contents: Pass-through, underlay ring, upper edge seal set, bottom bracket, screws, installation instructions.



Brown 1 84* Stock 75174

Green 1 84* Stock 75176


Red 1 84* Stock 75178


VILPE® Profiled steel pass-throughUsage: All round profiled metal sheet roofing types (tile-patterned). Minimum length of tile pattern 350 mm. Mouldable and fully waterproof thanks to the rubber seal on the bottom surface. Contents: Pass-through, underlay ring, sealing compound, screws, installation instructions/template.









VILPE® Steel pass-throughUsage: Low profiled metal sheet roofing. Waterproof thanks to the rubber cone with the mouldable aluminium flange. Contents: Pass-through, underlay ring, sealing ring, sealing compound, screws, template/installation instructions.






Red 1 36 Stock 732568



VILPE® Classic pass-through

Usage: Plain standing seam or if, retrofitted, also felt roofing. Thick rubber seal on the bottom of the flange. Sealing compound (not incl.) required on felt roofing. Contents: Pass-through, underlay ring, screws, template/installation instructions.






Red 1 12 Stock 741068


VILPE® HS Shingle/Slate pass-through

Usage: Slate, shingle and felt roofing types. Replaces VILPE® Felt pass-through. Contents: Pass-through, screws, installation instructions.

VILPE® Vittinge pass-throughUsage: Vittinge clay tile roofing. Contents: Pass-through, underlay ring, screws, installation instructions.

Malli Väri Pakkaus Kpl/lava Toimitus Tuotenro

1-waved (E13) Brick Red 1 24 Stock 74009

2-waved (T11) Brick Red 1 24 Stock 74010

P-series pass-throughs: Ø 75-160 mm


11




VILPE® Felt Tall pass-through

Usage: Felt roofing types while roof pitch less than 1:5 (11.5 degrees). Dimensions: Stem height 200 mm. Contents: Pass-through.





Grey 1 24 Order 732617

Red 1 24 Order 732618


VILPE® Decra pass-through

Usage: Decra roofing. Contents: Pass-through, underlay ring, sealing compound, screws, template.

Colour Pakkaus Kpl/lava Oletus lavakoko Toimitus Tuotenro

Black 60 Stock 74007VILPE® Eternit B9 pass-through

Usage: Fibre-cement roofing with tile width and wave height of 177 mm and 57 mm. Contents: Pass-through.






Red 1 24 Stock 740768


VILPE® Nera pass-through

Usage: Ruukki´s Finnera or Finnera Plus or similar roofing. Formerly called VILPE® SPT 60 pass-through or Finnera Plus. Contents: Pass-through, underlay ring, sealing compound, screws, template.



VILPE® Underlay Ring

Usage: Fastening of underlay material to roof battens, in set with VILPE® pass-through. Keeps water out of structures and insulation. More advanced solution: VILPE® Underlay 2K Seal Contents: Underlay ring.

Colour Pakkaus Kpl/lava Oletus lavakoko Toimitus Tuotenro

Black 1 Stock 75700VILPE® Collar EPDM for Felt Tall pass-throughUsage: For easy installation of Felt Tall pass-through on EPDM roofing. Contents: Collar made of EPDM material.









VILP

E®P-series pass-throughs: Ø 75-160 mm

Find a pass-through suitable for your underlay easily and quickly using our pass-through selector.

http://www.vilpe.com/qr/lv_e.html

Pass-through table


12








VILPE® XL Tile pass-through

Usage: The most common concrete tile roofing types. Replaces two 2-wave concrete tiles up to width of 330 mm and wave height of 27–40 mm. Contents: Pass-through, XL sealing ring, screws.

*FIN-160


Black 100 Stock 73204VILPE® XL Underlay ring

Usage: Fastening of underlay material to roof battens, in set with VILPE® XL pass-throughs. Keeps water out of structures and insulation. Contents: Two-piece XL Underlay ring.






Red 1 12 Stock 732548


VILPE® XL Classic pass-through

Usage: Plain standing seam roofing or if retrofitted, also felt roofing. . Thick rubber seal under the flange. Contents: Pass-through, two-piece XL underlay ring, template, sealing compound, screws.








VILPE® XL Universal MK1 pass-through

Usage: Profiled steel roofing with tile pattern that has wave distance of 183.3 mm, wave length of 350 mm and wave height of 39 mm. Contents: Pass-through, XL underlay ring, screws, installation instructions.

VILPE® XL Universal pass-through

Usage: All profiled steel and tile roofing types. Cut on site to fit the roofing profile. Contents: Pass-through, two-piece XL underlay ring, screws, installation instructions.






Red 1 4 Order 735508



Black 50* Stock 740052

Grey 50* Stock 740057

VILPE® XL Felt Tall pass-through

Usage: Felt roofing with roof pitch less than 1:5 (11.5 degrees). Dimensions: Stem height 300 mm. Contents: Pass-through.






Red 4 16 Order 740048


VILPE® XL Felt pass-throughUsage: Felt roofing. Installed between two felt layers. Dimensions: Flange width 150 mm. Contents: Pass-through.


P-series pass-throughs: Ø 160-250 mm

13






Red 1 12 Stock 732548


*EUR-240


Black 50 200 Stock 731982VILPE® KTV adapter

Usage: For connecting KTV ventilation set to a Ø110/125 mm pipe.

Colour Pakkaus Toimitus Tuotenro

Black 1 20 Order 792162




Red 1 20 Order 792168


VILPE® KTV Universal tile ventilation set without adapter

Usage: Roofing structure and roof space ventilation. Also suitable for drainage ventilation. Tile roofs: clay, ceramic and concrete tiles, both 1- and 2 waves and also plain tiles.Contents: KTV ventilator, underlay ring, screws.






Red 4 16 Order 740048

Brick Red 4 16 Order 740049VI

LPE®

KTV ventilation setsColour Product No.DeliveryPcs/palletPcs/pack






Red 1 24 Order 734198


VILPE® KTV Tile ventilation set without adapter

Usage: Roofing structure and roof space ventilation. Also suitable for drainage ventilation. Replaces one concrete roof tile with tile width of 330 mm, and wave width and height 330 mm and 27-40 mm respectively. Contents: KTV ventilator, underlay ring, screws.

VILPE® KTV Vittinge ventilation set without adapterUsage: Roofing structure and roof space ventilation. Also suitable for drainage ventilation. Vittinge clay tile roofing. Contents: KTV ventilator, underlay ring, screws. Colour Pakkaus Toimitus Tuotenro







VILPE® KTV Profiled steel ventilation set without adapterUsage: Roofing structure and roof space ventilation. Also suitable for drainage ventilation. Round profiled roofing. Contents: KTV ventilator, underlay ring, screws.








VILPE® KTV Steel ventilation set without adapterUsage: Roofing structure and roof space ventilation. Also suitable for drainage ventilation. Low profiled metal sheet roofing. Waterproof thanks to the rubber cone with the mouldable aluminium flange. Contents: KTV ventilator, underlay ring, sealing ring, sealing compound, screws.


Black 1 84* Stock 732532



Grey 1 84* Stock 732537

Red 1 84* Stock 732538


VILPE® KTV Classic ventilation set without adapter

Usage: Roofing structure and roof space ventilation. Also suitable for drainage ventilation. Plain standing seam or if, retrofitted, also felt roofing. Thick rubber seal on the bottom of the flange. Sealing compound (not incl.) required on felt roofing. Contents: KTV ventilator, underlay ring, screws.

Malli Väri Pakkaus Toimitus Tuotenro

1-waved (E13) Brick Red 1 24 Order 740082

2-waved (T11) Brick Red 1 24 Order 740084






Red 1 24 Stock 780138


VILPE® KTV Felt ventilation set without adapter

Usage: Roofing structure and roof space ventilation. Also suitable for drainage ventilation. Plain standing seam or if, retrofitted, also felt roofing. Slate, shingle and felt roofing types. Contents: KTV ventilator, screws.






Red 1 24 Order 732698


VILPE® KTV Decra ventilation set without adapter

Usage: Roofing structure and roof space ventilation. Also suitable for drainage ventilation. Contents: Pass-through, underlay ring, sealing compound, screws.

14





Grey 15 60 Stock 791107

Red 15 60 Stock 791108



VILPE® 110C/IS/250 Ventilation pipeUsage: Insulated sewer ventilation pipe without a cowl. Installed on an on-site made sheet metal cone with opening Ø 170 mm. Dimensions: Duct Ø 110 mm, external Ø 160 mm, height 400 mm. Contents: Ventilation pipe, screws.


60 Stock 71720

VILPE® Metal cone pipe sealing 110Usage: For sealing the sewer pipe and the on-site made sheet metal cone with max. Ø 128 mm. Dimensions: Ø 110 mm. Contents: Sealing made of EPDM rubber.

C-series for handmade/ pre-bent steel cones

The former Cone-series of the VILPE® family is now the C-series.

The ventilation products of the C-series are intended to be ins-

talled on standing seam sheet metal roofing, on metal cones.

The C-series includes roof fans, exhaust ventilation pipes and

sewer ventilation pipes, both in standard and XL sizes and

complete with installation tools. The series also includes ECo

roof fans for radon ventilation and ecological toilet ventilation.

Ventilation pipes

VILPE® C -series

Benefits of the VILPE® C-series Compatibility: a perfect fit on a metal cone of 170 or 315 mm

Installation: quick and easy

Functionality: a completely waterproof end result

Complete sizing and compatibility with ventilation equipment: Complete tables of airflow characteristics

Aesthetics: A harmonious design and colours that go well with roofing materials

Durability: 40 years of manufacturing experience, uniquely long warranty

VTT Certificate ensures attributes of measurements, quality and colour durability. Continual external quality control.


15






Red 10 48 Order 74138


VILPE® 110P/IS/350 Ventilation pipeUsage: Insulated sewer ventilation pipe. A pass-through according to the roofing material is required separately, and a VILPE® Flex pipe if needed. If used as a radon ventilator, a VILPE® Cowl 160 is needed. Dimensions: Duct size Ø 110 mm, height above roof approx. 350 mm. Contents: Ventilation pipe, screws.





Grey 12 48 Stock 731847

Red 12 48 Stock 731848



VILPE® VILPE Cowl-160

Usage: Rain cowl for VILPE® pipe with external Ø 160 mm (i.e. insulated pipe for duct sizes Ø 110 or Ø 125 mm). The cowl attached to an insulated pipe Ø 110 serves as a radon ventilator. Contents: Cowl






Red 20 80 Order 74128



VILPE® 110P/300 Ventilation pipe

Usage: Uninsulated ventilation pipe without a cowl. A pass-through according to the roofing material is required separately. A VILPE® Cowl-110 is required for ventilation of attic space and roof structures. Dimensions: Duct size Ø 110 mm, height above roof approx. 300 mm. Contents: Ventilation pipe, screws.





Grey 24 96 Stock 731167

Red 24 96 Stock 731168



VILPE® VILPE Cowl-110Usage: Rain cowl for a VILPE® pipe with external dimensions Ø 110 mm (uninsulated Ø 110 mm pipe). Contents: Cowl.





Grey 10 40 Stock 741607

Red 10 40 Order 741608



VILPE® 160P/500 Ventilation pipe

Usage: Uninsulated ventilation pipe without a cowl. A pass-through according to the roofing material is required separately. VILPE® AP Cowl 160 is required for ventilation of attic space and roof structures. Dimensions: Duct size Ø 160 mm, height above roof approx. 500 mm. Contents: Ventilation pipe, screws.


Black 48 Stock 73162

Brown 0 Order 731634

Green 0 Order 731636

Grey 48 Stock 731637

Red 0 Order 731638

Brick Red 0 Order 731639

Light Grey 0 Order 731631

VILPE® AP Cowl 160

Usage: Rain cowl for VILPE® 160P/500 Ventilation pipe with external dimensions Ø 160 mm. Contents: Cowl.





Grey 15 60 Stock 741747

Red 15 60 Order 741748


VILPE® Freeze cover 110/475

Usage: Retrofittable. Insulation cover for old Ø 110 sewer ventilation pipes. Renewal of both appearance and colour. Dimensions: External Ø 160 mm, height 475 mm. Contents: Freeze cover, screws.

Ventilation pipesColour Product No.DeliveryPcs/palletPcs/pack V

ILPE

®

16






Red 1 18 Stock 733908


VILPE® Ridge tile air vent

Usage: Underpressure air vent for ventilating the roof structures or attic space. For the most common concrete tile roofings. Replaces one ridge tile.Contents: Ventilator.


1 160 Stock 74204VILPE® Flex pipe 110Usage: For joining VILPE® ventilation pipe to drainage Ø 110 mm. Dimensions: Ø 110 mm. Contents: Flex pipe, fixing clamps.


20 240 Stock 74203VILPE® Adapter 75/110

Usage: For joining VILPE® Flex pipe 110 to a pipe Ø 75 mm. Dimensions: Ø 75/110 mm. Contents: Adapter.









VILPE® Cone ventilation pipe 125/400

Usage: Underpressure air vent for ventilating the roof structures or attic space. Installed in a sheet metal cone with opening Ø 170 mm, made by a sheet metal worker. Dimensions: External Ø 160 mm, height 400 mm. Contents: Ventilation pipe, screws.

*EUR-240

Ventilation pipesColour Product No.DeliveryPcs/palletPcs/pack





Grey 9 72* Stock 741307

Red 9 72* Stock 741308

Brick Red 9 72* Stock 741309


VILPE® 110P/300 Ventilation pipe + cowlUsage: Uninsulated ventilation pipe with a cowl. A pass-through according to the roofing material is required separately. Dimensions: Duct size Ø 110 mm, height above roof approx. 300 mm. Contents: Ventilation pipe, screws, cowl.



Brown 6 48* Order 741404


Grey 6 48* Stock 741407

Red 6 48* Order 741408


VILPE® 110P/IS/350 Ventilation pipe + cowl

Usage: Insulated ventilation pipe with a cowl. A pass-through according to the roofing material is required separately. Dimensions: Duct size Ø 110 mm, height above roof approx. 300 mm. Contents: Ventilation pipe, screws, cowl.

Ventilaiton of structuresColour Product No.DeliveryPcs/palletPcs/pack

17





Grey 24 96 Stock 753117

Red 24 96 Order 753118


VILPE® KTV Felt ventilation set/Ridge

Usage: Underpressure air vent for ventilating the roof structures or attic space, for felt roofings. Installed on the ridge, on the pane or next to the wall. Contents: Ventilator




Blue 10 120 Order 733915


Grey 10 120 Stock 733917

Red 10 120 Stock 733918


VILPE® Ridge capping vent

Usage: Underpressure air vent for ventilating the roof structures or attic space. For sheet metal roofing. Installed in round, angular or V-shaped ridge capping. Also retrofittable. Contents: Frame, seals, cover piece with a filter, screws, installation instructions.



VILPE® Airidge Felt ridge vent

Usage: Underpressure air vent for ventilating the roof structures of felt roofing. Installed in a chain on the ridge by using SNAP couplings. Dimensions: 580 x 325 x 30 mm. Contents: Ventilator.


Black 500 6000 Stock 74022

Brown 500 6000 Stock 74024

Green 500 6000 Stock 74028

Grey 500 6000 Stock 74032

Red 500 6000 Stock 74026


VILPE® Steel end capUsage: End cap for metal roofing.




Green 75 900* Order 74057

Grey 75 900* Stock 74060

Red 75 900* Stock 74052


VILPE® Tile end capUsage: End cap for tile roof.

*EUR-240

Ventilaiton of structures VILPE

®


End CapsColour Product No.DeliveryPcs/palletPcs/pack

Färg Pakkaus Kpl/lava Toimitus Tuotenro

Black 3 36 Order 731983VILPE® KTV Felt ventilation set/Ridge adapter

Usage: For joining the VILPE® KTV Felt ventilation set/Ridge to a pipe Ø 110–125 mm. Dimensions: Ø 110/125 mm. Contents: Adapter.

18





Grey 1 24* Stock 734407

Red 1 24* Stock 734408



VILPE® 125P/IS/500 Exhaust ventilation pipe

Usage: Insulated exhaust ventilation pipe with a cowl. Inner pipe is made of galvanized steel and has a lip seal. A VILPE® pass-through according to the roofing material is required separately. Dimensions: Duct size Ø 125 mm, external Ø 160 mm, height above roof approx. 500 mm. Contents: Exhaust ventilation pipe, cowl, screws.





Grey 1 24* Stock 741697

Red 1 24* Stock 741698


Light Grey 1 24* Order 741691

VILPE® 160P/IS/500 Exhaust ventilation pipe

Usage: Insulated exhaust ventilation pipe with a cowl. Inner pipe is made of galvanized steel and has a lip seal. A VILPE® pass-through according to the roofing material is required separately. Dimensions: Duct size Ø 160 mm, external Ø 300 mm, height above roof approx. 500 mm. Contents: Exhaust ventilation pipe, cowl, screws.


Black 1 15* Order 741782



Grey 1 15* Order 741787

Red 1 15’ Order 741788


VILPE® 160P/IS/500 XL Exhaust ventilation pipe

Usage: Insulated exhaust ventilation XL pipe with a cowl. Inner pipe is made of galvanized steel and has a lip seal. A VILPE® XL pass-through according to the roofing material is required separately. Dimensions: Duct size Ø 160 mm, external Ø 300 mm, height above roof approx. 500 mm. Contents: Exhaust ventilation pipe, cowl, screws.
























Red 1 9 Stock 74228


VILPE® 75P/IS/500 Central vacuum cleaner exhaust pipe

Usage: Insulated exhaust ventilation pipe for a central vacuum cleaner. With a cowl. A VILPE® pass-through according to the roofing material is required separately. Dimensions: Duct size Ø 75 mm, external Ø 110 mm, height above roof approx. 500 mm..

Exhaust ventilation pipes: P-series


*EUR-240

19






Red 1 24 Order 741808


VILPE® 125S 250x250 Exhaust vent

Usage: Exhaust vent for a flat surface. Dimensions: Duct size Ø 125 mm, installation set 250 x 250 mm. The installation area must be at least the same size. Contents: Exhaust vent, installation set, adapter and screws.






Red 1 18 Order 741828












VILPE® 125C/IS/400 Exhaust ventilation pipe

Usage: Insulated exhaust ventilation pipe with a cowl. Inner pipe is made of galvanized steel and has a lip seal. Installed in a sheet metal cone with opening Ø 170 mm, made by a sheet metal worker. Dimensions: Duct size Ø 125 mm, external Ø 160 mm, height 400 mm. Contents: Exhaust ventilation pipe, cowl, screws.









VILPE® 160C/IS/450 XL Exhaust ventilation pipe

Usage: Insulated exhaust ventilation XL pipe with a cowl. Inner pipe is made of galvanized steel and has a lip seal. Installed in a sheet metal cone with opening Ø 315 mm, made by a sheet metal worker. Dimensions: Duct size Ø 160 mm, external Ø 300 mm, height 450 mm. Contents: Exhaust ventilation pipe, cowl, screws.



















VILP

E®Exhaust ventilation pipes: S-series

Exhaust ventilation pipes: C-series



*EUR-240

20






Red 1 12 Order 737358


VILPE® ECo110P/110/500 Roof fanUsage: Energy-efficient roof fan with a DC motor for radon ventilation. Also suitable for ventilating an ecological toilet. The motor is specially protected and preadjusted to 3V. If necessary, can be adjusted with the potentiometer situated in the cowl of the roof fan. Separate controller is not needed. A VILPE® pass-through according to the roofing material is required separately. Dimensions: Duct size Ø 110 mm, external Ø 160 mm, height 500 mm.Contents: Roof fan, screws, installation, operating and maintenance instructions.









VILPE® E120P/125/IS/500 Roof fan

Usage: Insulated roof fan for ventilation. Inner pipe is made of galvanized steel and has a lip seal. A VILPE®pass-through according to the roofing material is required separately. Dimensions: Duct size Ø 125 mm, external Ø 160 mm, height above roof approx. 500 mm. Contents: Roof fan, screws, installation, operating and maintenance instructions.









Usage: Insulated roof fan for ventilation. The pipe has a 50-mm built-in silencer. Inner pipe is made of perforated, galvanized steel and has a lip seal. A VILPE® pass-through according to the roofing material is required separately. Dimensions: Duct size Ø 125 mm, external Ø 225 mm, height above roof approx. 500 mm. Contents: Roof fan, screws, installation, operating and maintenance instructions.

Technical information page 43 – 45









Usage: Insulated exhaust ventilation XL pipe with a cowl. Inner pipe is made of galvanized steel and has a lip seal. Installed in a sheet metal cone with opening Ø 315 mm, made by a sheet metal worker. Dimensions: Duct size Ø 250 mm, external Ø 300 mm, height 450 mm. Contents: Exhaust ventilation pipe, cowl, screws.









Usage: Insulated exhaust ventilation XL pipe with a cowl. Inner pipe is made of galvanized steel and has a lip seal. . Installed in a sheet metal cone with opening Ø 315 mm, made by a sheet metal worker. Dimensions: Duct size Ø 200 mm, external Ø 300 mm, height 450 mm. Contents: Exhaust ventilation pipe, cowl, screws.

Exhaust ventilation pipes: C-series

Roof fans: P-series



*EUR-240

21






Red 1 12 Order 737348



VILPE® ECo190P/125/500 Roof fan

Usage: Energy-efficient insulated roof fan with a DC motor, controlled with a 0–10 V voltage. The pipe has a built-in silencer. Inner pipe is made of galvanized sheet metal and has a lip seal. A VILPE® ECo Controller and a VILPE® pass-through according to the roofing material are required separately. Dimensions: Duct size Ø 125 mm, external Ø 225 mm, height above roof approx. 500 mm. Contents: Roof fan, screws, installation, operating and maintenance instructions.






Red 1 12 Order 737388



VILPE® ECo220P/160/500 Roof fan

Usage: Energy-efficient insulated roof fan with a DC motor, controlled with a 0–10 V voltage. Inner pipe is made of perforated, galvanized sheet metal and has a lip seal. A VILPE® ECo Controller and a VILPE® pass-through according to the roofing material are required separately. Dimensions: Duct size Ø 160 mm, external Ø 225 mm, height above roof approx. 500 mm. Contents: Roof fan, screws, installation, operating and maintenance instructions.





Grey 1 24* Order 73477

Red 1 24* Order 73478


Light Grey 1 24* Order 73471


Usage: Insulated roof fan for ventilation. Inner pipe is made of perforated, galvanized sheet metal and has a lip seal. A VILPE® pass-through according to the roofing material is required separately. Dimensions: Duct size Ø 160 mm, external Ø 225 mm, height above roof approx. 500 mm. Contents: Roof fan, screws, installation, operating and maintenance instructions.








VILPE® E220P/160/IS/500 XL Roof fan

Usage: Insulated XL roof fan for ventilation. Inner pipe is made of galvanized sheet metal and has a lip seal. A VILPE® XL pass-through according to the roofing material is required separately. Dimensions: Duct size Ø 160 mm, external Ø 300 mm, height above roof approx. 500 mm. Contents: Roof fan, screws, Installation, operating and maintenance instructions.








VILPE® ECo250P/200/500 XL Roof fan

Usage: Energy-efficient insulated XL roof fan with a DC motor, controlled with a 0–10 V voltage. Inner pipe is made of perforated, galvanized sheet metal and has a lip seal. A VILPE® ECo Controller and a VILPE® XL pass-through according to the roofing material are required separately. Dimensions: Duct size Ø 200 mm, external Ø 300 mm, height above roof approx. 500 mm. Contents: Roof fan, screws, Installation, operating and maintenance instructions.

VILP

E®Roof fans: P-series


*EUR-240

22

Roof fans: S-series







Red 1 12 Stock 737538



VILPE® ECo110S Roof fan + ISUsage: Energy-efficient roof fan with a DC motor for radon ventilation. Also suitable for ventilating a garage or an ecological toilet. Compatible for VILPE® 110 mm insulated pipe or other pipe with external dimensions Ø 160 mm. The motor is specially protected and preadjusted to 3V. If necessary, can be adjusted in a potentiometer situated in the cowl of the roof fan. Separate controller is not needed. Dimensions: Duct size Ø 110 mm, (installation set 250 x 250 mm, installation area must be at least the same size). Contents: Roof fan, installation set, screws, Installation, operating and maintenance instructions.






Red 1 12 Stock 737207



VILPE® E120S Roof fan + IS

Usage: Roof fan for the top of an air conduit or silencer. If installed on a flat surface a separate installation set is required. Dimensions: Duct size Ø 125 mm, (installation set 250 x 250 mm, installation area must be at least the same size). Contents: Roof fan, installation set, screws, Installation, operating and maintenance instructions.






Red 1 12 Stock 737528




Usage: Roof fan for the top of an air conduit or silencer. If installed on a flat surface a separate installation set is required. Dimensions: Duct size Ø 125 mm, (installation set 300 x 300 mm, installation area must be at least the same size). Contents: Roof fan, installation set, screws, Installation, operating and maintenance instructions.

Colour Kpl/lava Toimitus Tuotenro





Red 1 12 Stock 737398


VILPE® ECo220S Roof fan + IS

Usage: Energy-efficient roof fan with a DC motor for the top of an air conduit or silencer, controlled with a 0–10 V voltage. An installation set for a flat surface is included. VILPE® ECo Controller is available separately. Dimensions: Duct size Ø 160 mm, (installation set 300 x 300 mm, installation area must be at least the same size). Contents: Roof fan, installation set, screws, Installation, operating and maintenance instructions.






Red 1 12 Stock 737518



VILPE® ECo190S Roof fan + IS

Usage: Energy-efficient insulated roof fan with a DC motor for the top of an air conduit or silencer, controlled with a 0–10 V voltage. If installed on a flat surface a separate installation set is required. Dimensions: Duct size Ø 125 mm, (installation set 300 x 300 mm, installation area must be at least the same size). Contents: Roof fan, installation set, screws, Installation, operating and maintenance instructions.






Red 1 12 Stock 737508




Usage: Roof fan installed on the top of an air conduit or silencer. If installed on a flat surface, a separate installation set is required. Dimensions: Duct size Ø 160 mm, (installation set 300 x 300 mm, installation area must be at least the same size). Contents: Roof fan, installation set, screws, Installation, operating and maintenance instructions.

*EUR-240

23

VILP

E®Roof fans: S-series


Colour Kpl/lava Toimitus Tuotenro







VILPE® ECo250S XL Roof fan + IS

Usage: Energy-efficient insulated roof fan with a DC motor for the top of an air conduit or silencer, controlled with a 0–10 V voltage. If installed on a flat surface a separate installation set is required. Dimensions: Duct size Ø 200 mm, (installation set 400 x 400 mm, installation area must be at least the same size). Contents: Roof fan, installation set, screws, Installation, operating and maintenance instructions.









VILPE® E120C/125/IS/400 Roof fan

Usage: Insulated roof fan for ventilation. Inner pipe is made of galvanized sheet metal. To be installed in a sheet metal cone with opening Ø 170 mm, made by a sheet metal worker. Dimensions: Duct size Ø 125 mm, outer Ø 160 mm, height 400 mm. Contents: Roof fan, screws, Installation, operating and maintenance instructions.









VILPE® ECo110C/110/ER/400 Roof fan

Usage: Energy-efficient insulated roof fan with a DC motor for radon ventilation. Also suitable for ventilation of an ecological toilet. Not for indoor air ventilation. Installed in a sheet metal cone with opening Ø 170 mm, made by a sheet metal worker. The motor is specially protected and preadjusted to 3V. Dimensions: Duct size Ø 110 mm, outer Ø 160 mm, height 400 mm. Contents: Roof fan, screws, Installation, operating and maintenance instructions.








VILPE® E220C/160/IS/450 XL Roof fan

Usage: Insulated XL roof fan for ventilation. Inner pipe is made of galvanized sheet metal. To be installed in a sheet metal cone with opening Ø 315 mm, made by a sheet metal worker. Dimensions: Duct size Ø 160 mm, outer Ø 300 mm, height 450 mm. Contents: Roof fan, screws, Installation, operating and maintenance instructions.

Roof fans: C-series


Färg Pakkaus Toimitus Tuotenro

Black Order 736922VILPE® S-adapter 110

Usage: For installing VILPE® E120S and ECo110S roof fans on uninsu-lated, Ø 110 mm Alipai pipes.Contents: Adapter.

24


White 1 Stock 735022VILPE® Thyristor regulator 2299 UCJUsage: For adjusting the rotation speed of a roof fan. Flush mounting. Surface mounting. Contents: Controller.


White 1 Stock 735024VILPE® Thyristor regulator 2299AGUsage: For adjusting the rotation speed of a roof fan. Flush mounting. Contents: Controller.

Controllers


White 1 Stock 735028

VILPE® ECo Controller 0–10VUsage: Stepless ECo Controller for manual control of the rotation speed of the motors of VILPE® ECo roof fans. The controller provides the 0–10 V output signal and the minimum is adjustable. The splash proof ECo Controller is suited for both flush and surface mounting. Contents: Controller.

Product No.Delivery

Väri Kpl/lava Toimitus Tuotenro

White 1 Stock 735029

VILPE® ECo Monitor drive controllerUsage: For monitoring and control of VILPE® ECo roof fans. Can monitor rotation speed signals from 1 - 5 fans. Isolated alarm output and a faulty fan LED. Optional 0 - 10 V input for speed control, ad-justable by an internal trimmer from 0 – 100 %. 10 V 1 mA operating voltage that can be provided from the fan (Patent 2431303). Contents: ECo Monitor, instructions.


1 45 Stock 735050VILPE® E190 / E120 roof fans service set


1 36 Stock 735098VILPE® TI-17 Chimney fan

Usage: Suitable for fireplaces with max. 0.35 m2 clear opening. The size of the flue can be min. 123 x 123 mm and max. 160 x 160 mm. The highest allowed temperature of the portable gas is 200°C. Contents: Chimney fan.

VILPE® E150 / E80 roof fans service setVäri1 Kpl/lava Toimitus Tuotenro

1 45 Stock 735054VILPE® E220 roof fans service set Väri Kpl/lava Toimitus Tuotenro1 48 Order 735055VILPE® E250 roof fans service set Väri1 Kpl/lava Toimitus Tuotenro1 48 Order 735056VILPE® E280 roof fans service set Väri Kpl/lava Toimitus Tuotenro1 24 Order 735057VILPE® E310 roof fans service setVäri Kpl/lava Toimitus Tuotenro

1 45 Stock 735058VILPE® ECo110/190 roof fan service set Väri11 Kpl/lava Toimitus Tuotenro1 45 Stock 735059VILPE® ECo220 roof fan service set

The service set includes a motor and a condenser (not in ECo maintenance kits) as well as wiring instructions.


1 45 Stock 735053VILPE® Radon roof fans service set


1 48 Stock 735060VILPE® ECo250 roof fan service set


1 45 Stock 735052

Service sets

Chimney fan

Product No.DeliveryPcs/pallet

Product No.DeliveryPcs/palletPcs/pack

Colour Pcs/pack

Pcs/pack

NEW

25

Colour Pakkaus Oletus lavakoko Toimitus Tuotenro







VILPE® Uniroof Roof hatch

Usage: For both tile and sheet metal roofings. A flexible fold facilitates installation under the ridge element. Used as a fire and service hatch and an access between the roof and the attic space. Dimensions: Opening 600 x 600 mm. Contents: Roof hatch, seal, Uniroof underlay sealing, screws, installation instructions.








VILPE® Felt Roof hatch

Usage: For both roll and shingle felt roofing. Used as a fire and service hatch and an access between the roof and the attic space. The flange is installed with hot bitumen between two felt layers. Dimensions: Opening 600 x 600 mm. Flange 150 mm. Contents: Roof hatch, screws, installation instructions.

The Uniroof roofhatch now includes the Uniroof sealing for the underlay.

VILPE® Intake Vent

VILPE® Intake Vent—new solution of supply air intake

The VILPE® Intake Vent supply air element is the new groundbreaking member of the VILPE® product family. The element provides a rooftop supply air component for ventilation systems. Compatible with Ø 160 mm ventilation ducts.

The element includes a new, unique VILPE® supply air hood. The hood directs any raindrops away, and the details in the design also ensure minimal pressure loss caused by the hood.

The modern design goes well with the classic VILPE® exhaust pipe, but at the same time it functions well and is impressive to look at.

The VILPE® Intake Vent supply air element is meant to be installed on VILPE® pass-throughs.

Aerodynamic properties on page 45.

Roof hatches

VILP

E®








Red 1 18 Stock 741898



VILPE® 160S Intake Vent

Usage: Intake vent for mechanical ventilation, installed on the roof. Includes the new VILPE® Intake Cowl, which unique structure separates rain droplets from the outside air. The attention to detail in the design ensures minimal pressure loss. Dimensions: Duct size Ø 160 mm, external Ø 300 mm, installation set 300 x 300 mm. The installation area must be at least the same size. Contents: Ventilation pipe, Intake Cowl, installation set, screws.






Red 1 12 Stock 741888



VILPE® 160/IS/500 Intake Vent

Usage: Intake vent for mechanical ventilation, installed on the roof. Includes the new VILPE® Intake Cowl, which unique structure separates rain droplets from the outside air. The attention to detail in the design ensures minimal pressure loss. Dimensions: Duct size Ø 160 mm, external Ø 300 mm, height above roof approx. 500 mm. Contents: Ventilation pipe, Intake Cowl, screws.

NEW

NEW

26








VILPE® Solar Tile pass-through Usage: The most common concrete tile roofings with tile width of 330 mm. Replaces one 2-wave concrete tile. Contents: Pass-through, underlay ring, flange, cover, shrinking tube, screws, installation instructions/templates for the underlay ring and the pass-through.








VILPE® Solar Universal pass-through

Usage: All tile roofings (ceramic, clay, concrete and special tiles, 1- and 2-wave tiles as well as plain tiles). Contents: Pass-through, seal for the upper side, bracket to the bottom, underlay ring, flange, cover, shrinking tube, screws, installation instructions/templates for the underlay seal and the pass-through.

VILPE® Solar Vittinge pass-through

Usage: Vittinge clay tile roofings. Contents: Pass-through, underlay ring, flange, cover, shrinking tube, screws, installation instructions/templates for the underlay seal and the pass-through.








VILPE® Solar Steel pass-through

Usage: The most common concrete tile roofings with tile width of 330 mm. Replaces one 2-wave concrete tile. Contents: Pass-through, underlay ring, flange, cover, shrinking tube, screws, installation instructions/templates for the underlay ring and the pass-through.








VILPE® Solar Classic pass-through

Usage: For plain standing seam roofings or felt roofings. Retrofittable. Thick rubber seal under the flange. Sealing compound is required separately on felt roofs. Contents: Pass-through, underlay ring, flange, cover, shrinking tube, screws, templates/installation instructions.








VILPE® Solar Felt pass-through

Usage: For new felt roofings. Installed between two felt layers. Contents: Pass-through, flange, cover, shrinking tube, screws, installation instructions/template.

Malli Väri Pakkaus Toimitus Tuotenro

1-waved (E13) Brick Red 1 24 Order 75662

2-waved (T11) Brick Red 1 24 Order 75664








VILPE® Solar Profiled steel pass-through Usage: For all round profiled metal sheet roofings (with roof tile pattern). Minimum length of tile pattern is 350 mm. Moldable and fully waterproof due to the rubber seal mounted on the lower surface. Contents: Pass-through, underlay ring, sealing compound, flange, cover, shrinking tube, screws, templates/installation instructions.

VILPE® Solar pass-throughs are for solar collector pipings, cables or ot-her smaller pipes led through the roof.

The maximum size of the exit hole of the top is 100 x 60 mm. For smal-ler cords and cables (4 – 50 mm), a separately sold VILPE® Solar cable sealing is available.

An openable and turnable structure makes installation and mainte-nance easy.

Solar pass-throughs


27


1 Stock 75701

VILPE® Solar cable sealingUsage: A rubber seal for VILPE® Solar pass-throughs. Enables 4–50 mm wires and cables to be led watertightly through the roof. Fastens to the Solar pass-through with included weatherproof fastener. Contents: Cable sealing, clamp.






Red 20 80 Stock 74098


VILPE® Aerial sleeve 12–90

Usage: For leading antennas, flagpoles and other pipes and bollards through the roof. Stepped EPDM rubber + plastic collar, installed on a separately available VILPE® pass-through. The pass-through is chosen according to the roofing material. Dimensions: For duct sizes Ø 12/19/25/38/50/60/75/90 mm. Contents: Aerial sleeve, clamp.






Red 1 36 Order 741008


VILPE® Pipe sealing 110–155Usage: For leading antennas, flagpoles and other pipes and bollards through the roof. Stepped EPDM rubber + plastic collar, installed on a separately available VILPE® pass-through. The pass-through is chosen according to the roofing material. Dimensions: For duct sizes Ø 110/125/140/155 mm. Contents: Pipe sealing, clamp.


1 24 Stock 740896VILPE® XL Pipe sealing 175–250

Usage: For leading antennas, flagpoles and other pipes and bollards through the roof. Stepped EPDM rubber + plastic collar, installed on a separately available VILPE® XL pass-through. The pass-through is chosen according to the roofing material. Dimensions: For duct sizes Ø 175/200/225/250 mm. Contents: Pipe sealing, clamp.


Black Order 740092

Brown Order 740094

Green Order 740096

Grey Order 740097

Red Order 740098

Brick Red Order 740099

VILPE® Flue joint for metal roofing

Usage: For connecting flashing of a flue tightly and neatly to metal sheet roofing with tile pattern. Distance of the waves in tile pattern 183.3 mm and height of the profile approx. 39 mm (for example Ruukki´s Tiilikainen). Contents: Flue joint, screws, a seal, installation instructions.


Black Order 740192

Brown Order 740194

Green Order 740196

Grey Order 740197

Red Order 740198

Brick Red Order 740199

VILPE® Flue joint for tile roofing

Usage: For connecting flashing of a flue tightly and neatly to tile roofing. Fits 2-wave concrete tiles with width of 330 mm. Contents: Flue joint, installation instructions.



VILPE® Solar Felt Tall pass-throughUsage: For felt roofing with roof pitch less than 1:5 (11.5 degrees). Installed between two felt layers. Dimensions: Stem height 200 mm. Contents: Pass-through, flange, cover, shrinking tube, screws, installation instructions.


Black 38 Order 740292

Brown 38 Order 740294

Green 38 Order 740296

Grey 38 Order 740297

Red 38 Order 740298

Brick Red 38 Order 740299

VILPE® Roofit flue jointUsage: Flexible flue joint for tile roofing. Suitable for use with the Flashing set of the Chimney pass-through No. 2. Contents: Flue joint, screws.

Solar pass-throughs

Aerial sleeves and pipe pass-throughs

Flue joints

VILP

E®




28

See product selection on the next page.

Roof pass-through for modular chimney

The Roof pass-through for modular chimney is a new pass-through set for 32 x 32...37 x 37 cm chimneys on any type of roofing. The design of the pass-through will merge completely with the roof since it closely resembles the look of most VILPE® pass-throughs by the same manufacturer. There are six standard colour options.

This one product is suitable for all types of roofing; standing seam metal, profiled steel, one- or two-wave tiles, or felt (roll or pieces). Compatible with the most common roof pitches.

The Roof pass-through for modular chimney is completely waterproof and easy to

install. All the necessary parts are included in the set and the installation procedure itself is familiar from the VILPE® pass-throughs for round steel chimneys.

This product assembly includes: the pass-through set and the sleeve made of polypropylene plastic, a flashing extension and a chimney casing set made of sheet metal. The pass-through set and the chimney casing set are sold separately. The chimney cap and the assembly tape can be chosen from the Schiedel catalogue; everything else needed for the installation is included in the set.

Chimney pass-throughs

VILPE® Chimney pass-throughs for round chimneys

VILPE® Chimney pass-throughs are suitable for insulated, round metal chimneys, available in two sizes. Chimney pass-through set No.1 is for round Ø 200 – 265 mm chimneys, and Chimney pass-through set No.2 is for round Ø 265 – 380 mm chim-neys. A plastic chimney pass-through is joined with included rubber seal and clamp. Sealing for underlay, which consists of two plastic components, rubber seal and a butyl strap, prevents water from seeping through the hole made in the underlay, keeping it waterproof. Chimney pass-through can be installed on both metal and tile roofings using VILPE® flashing set. On felt roofings, flashing set is not needed.

VILPE® Chimney pass-throughs are easy and quick to install, and generate cost savings by rending expensive flashing unnecessary. Easy installation has been taken into consideration already at the planning phase of the pass-throughs, just as with all VILPE® products. A DIY principle works with all pass-throughs. Everything needed for installation is included.

VILPE® Chimney pass-throughs and sealings for underlay have been firetested and certified at VTT Expert Services. The distance of the plastic sealing for the underlay to the chimney is 20 mm; the rubber sleeve for the underlay is tightened against the chimney for a waterproof end result. The distance of the plastic pass-through on the roofing to the chimney is 10 mm; a rubber seal is tightened around the chimney.

29





VILPE® Chimney pass-through set No. 2 Round

Usage: For passing round, metal, insulated Ø 270–380 mm prefabricated chimneys through the roof. For other than felt roofings, the Chimney underlay seal No. 2 and the Flashing set are also required. Contents: Pass-through, rubber seal and clamp, flashing set, Design and installation manual, fixing screws.




Grey 1 14* Stock 742427


VILPE® Chimney pass-through set No. 1 Round

Usage: For passing round, metal, insulated Ø 200–265 mm prefabricated chimneys through the roof. For other than felt roofings, the Chimney underlay seal No. 1 and the Flashing set are also required. Contents: Pass-through, rubber seal and clamp, flashing set, Design and installation manual, fixing screws.




Grey 1 14* Stock 741027

Brick Red 1 14* Order 741029

VILPE® Chimney pass-through No. 1 Round

Usage: For passing round, metal, insulated Ø 200–265 mm prefabricated chimneys through the roof. For other than felt roofings, the Chimney underlay seal No 1 and the Flashing set are also required. Contents: Pass-through, rubber seal, clamp, Design and installation manual.




Grey 1 6* Stock 741037


VILPE® Chimney pass-through No. 2 Round

Usage: For passing round, metal, insulated Ø 270–380 mm prefabricated chimneys through the roof. For other than felt roofings, the Chimney underlay seal No. 2 and the Flashing set are also required. Contents: Pass-through, rubber seal, clamp, Design and installation manual.


1 125* Stock 741020VILPE® Chimney fixing battens for flashing set

Usage: Facilitates installation of the flashing set to plain steel roofings. Dimensions: 1180 x 28 x 100 mm. Contents: 4 pieces of battens made of galvanized sheet metal, fixing screws.

VILPE® Chimney underlay seal RoundUsage: For other than felt roofings. Prevents water leaking in to the insulation material through the hole that is cut for the underlay. Chimney underlay seal No. 1 is used with Chimney pass-through No. 1 for round Ø 200 - 265 mm chimneys. Chimney underlay seal No. 2 is used with Chimney pass-through No. 2 for round Ø 270–380 mm chimneys. Contents: Two plastic parts, rubber seal and a butyl strip.

Malli Pakkaus Kpl/lava Toimitus Tuotenro

No.1 1 38 Stock 73206

No.2 1 38 Stock 73208






VILPE® Flashing extension Chimney No. 1 Round

Usage: Facilitates the installation of the chimney further from the ridge. Overlapping 10 cm, length 700 mm. Dimensions: 650 x 700 mm. Contents: 1 sheet, seals.





VILPE® Flashing extension Chimney No. 2 Round

Usage: Facilitates the installation of the chimney further from ridge. Overlapping 10 cm, length 1100 mm. Dimensions: 785 x 1 100 mm. Contents: 1 sheet, seals.

Chimney pass-throughs

*EUR-240

VILP

E®


30





Red 1 16 Stock 790318

Off White 1 16 Stock 790320

Beige 1 16 Stock 790321

VILPE® Ross ventilation pole 125/135

Usage: For ventilating the crawl space of a house, thus preventing damp damage and radon problems in ground floors. Can also be used as an inlet air pipe. Dimensions: Inner Ø of the angle pipe 125 mm, outer Ø 132 mm. Contents: Cowl, vertical pipe, wall fasteners with screws, angle pipe, Ross wall sleeve, two centering rings.





Red 1 12 Stock 790368














VILPE® Ross Wall sleeve

Usage: Installed in the wall element or in cast foundations during the casting. Also suitable for block foundations. Contents: Ross wall sleeve, two centering rings.

Malli Väri Pakkaus Kpl/lava Toimitus Tuotenro

Ross 125 Black 56 Stock 790780



Ross ventilation poles are a stylish solution for ventilating subfloor spaces and preventing base floor humidity and radon accumulation. They also enable taking the supply air in saunas located in the basement, in fireplaces or in a ventilation machine. Ross ventilation poles act as air supplier also when constructing a mechanical output air system or a mechanical radon removal system in a subfloor space.

Ross ventilation pole can be used for ventilating all types of buildings. The new, bigger Ross 200 is suitable for ventilating larger targets such as blocks of flats; e.g., in lift shafts. The poles are designed so that air can flow nearly unimpended; thus, no harmful air lock can be formed. The design also prevents snow, debris and tiny animals from entering the subfloor space.

With Ross renovation set, renewing old vertical pipes in subfloor space is easy.

Ross ventilation poles


Technical information page 46

Before After Watch renovation video!

31





Red 1 20 Order 790638

Off White 1 20 Order 790640

Beige 1 20 Order 790641

VILPE® Ross renovation set 125/110

Usage: For improving the ventilation and updating the appearance of an old vertical pipe of the crawl space. Dimensions: Ø 125/110 mm.





Red 1 20 Order 790688



VILPE® Ross renovation set 160/160

Usage: For improving the ventilation and updating the appearance of an old vertical pipe of the crawl space. Dimensions: Ø 160 mm. Contents: Cowl, vertical pipe, wall fasteners with screws, adapter for Ross ventilation pole Ø 160 and a pipe Ø 160 mm.


Light Grey Order 790511

Black Order 790512

Grey Order 790517

Red Order 790518

Off White Order 790520

Beige Order 790521

VILPE® Ross cowl 125Colour Pakkaus Kpl/lava Toimitus Tuotenro

Light Grey Order 790561

Black Order 790562

Grey Order 790567

Red Order 790568

Off White Order 790570

Beige Order 790571

VILPE® Ross cowl 160





Red 1 32 Order 790418



VILPE® Ross -vertical pipe ø125Colour Pakkaus Kpl/lava Toimitus Tuotenro


Black 32 Order 790462


Red 32 Order 790468

Off White 32 Order

CATALOGUE 2017 - Pijpdakventilatorpijpdakventilator.nl/.../2017/02/Vilpe-catalogus-2017.pdf ·...

Documents

Transcript of CATALOGUE 2017 - Pijpdakventilatorpijpdakventilator.nl/.../2017/02/Vilpe-catalogus-2017.pdf ·...