Catalogue 2017 -...

“Service, Knowledge, Experience” A – Z Industry & Trade Solutions -Since 1995

Cable Hauling

Catalogue 2017

Address:- 11/5 Hudson Avenue, Castle Hill , NSW 2154Contact:- 02/ 8850 2700 – FAX:- 02/ 8850 2701

[email protected]

“Service, Knowledge, Experience” A – Z Industry & Trade Solutions – Since 1995

At All-Trades We Pride ourselves in Providing Quality Service with Quality Products – Below are Just a few of our Supply Chain Partners –

If you don’t see what you need in this Brochure, please call the numbers on the Front page – “We may have what you need”

If we don’t we’ll get it !

In addition to our Cable Hauling Range We are also Proud to Import and Distribute Quality Specialist Hydraulic Maintenance Equipment & Battery Operated Crimping and Cutting Gear, This Equipment is designed especially for the Electrical and Rail Sectors.We offer Spares , Service and repair Back up to all equipment we have on offer.


oPortable Gas Monitors

oManhole Barriers and Tent Frames

oPit Lid Locator

"A - Z Product solutions to trade and industry”

ORDERING INFO

MSA-10110447 – ALTAIR – X4 GAS DETECTOR ONLY

MSA-10110447K – ALTAIR – X 4 GAS DETECTOR, CHARGER, CAL GAS, REGULATOR & CARRY CASE

MSA-10110447K-D - MSA-10110447K – ALTAIR – X 4 GAS DETECTOR, CHARGER, CAL GAS, REGULATOR , PROBE, ASP PUMP & CARY CASE

ORDERING INFO

• OMTF48 – MANHOLE GUARD (TELSTRA) w/O TENT FRAME ** AS PICTURED TOP LEFT )

• OWTF45 – MANHOLE GUARD (TELSTRA) WITH TENT FRAME

• TENT-01 – TENT TO SUIT – WITH WINDOW AND CARRY BAG ( PICTURED ON OWTF45 LEFT )

!! FOLDAWAY & STANDARD FRAMES ALSO AVAILABLE !!

ORDERING INFO

AD300A – PIT LID LOCATOR - HIGH PERFORMANCE LOW COST LOCATOR USED BY TELSTRA AND WATER UTILITIES.

1

“Service, Knowledge, Experience” A – Z Industry & Trade Solutions – since 1995

oTelstra Pit Lid Keys & Accessories

oGatic Pit Lid Keys & Kits


oNon-Conductive Soil Probes

ORDERING INFO

VAN-PKEY – TELSTRA STYLE PIT KEY – WITH LOCK DEVICE.

VAN-SB – SEAL BREAKER TO SUIT TELSTRA STYLE PIT KEY

ORDERING INFO

VAN-PKSET – GATIC PIT KEY SET – 2 X LONG HANDLE , 1 X SHORT HANDLE SEAL BREAKER , 2 X ROLL BARS , SPANNER , SCRAPER & CARRY BAG

VAN-SHPK – SHORT HANDLE SEAL BREAKER

VAN-LHPK – LONG HANDLE SEAL BREAKER

ORDERING INFO

JP-N76-401 – T BAR SOIL PROBE 1.2MTR –1000V RATED

JP-N76-403 – T BAR SOIL PROBE 1.5MTR –1000V RATED

!! OTHER INSULATED DIGGING TOOLS AVAILABLE !!

3


ORDERING INFO

VAN-PAR400 – ROPE POLYPROP BLUE/YELLOW – 6MM X 400MTR – CENTRE FEED MBF. 595 KG

VAN-03JET – JETLINE – 3MM ORANGE X 1000MTR

DON-20-AQUA – 20MM X 250MTR – 6.9TONNE TENSILE DON-24-AQUA – 24MM X 250MTR – 9.9TONNE TENSILE

oParramatta Rope, Aquatec & Jetline

oDouble Braids


oExotic & Spectra Braids

!! OTHER DIAMETERS OF AQUATEC AVAILABLE !!

ORDERING INFO

FIB-DB8 – POLYESTER BRAID 8MM – 1750KG FIB-DB10 – POLYEATER BRAID 10MM – 2400KG FIB-DB12 – POLYESTER BRAID 12MM – 3400KG FIB-DB14 – POLYESTER BRAID 14MM - 4800KG

!! MINIMUM LENGTHS MAY APPLY – PLEASE CALL !!

ORDERING INFO

FIB-06SPECTRA – 6MM SPECTRA BRAID – 1800KG FIB-08SPECTRA – 8MM SPECTRA BRAID - 3300KG FIB-10SPECTRA – 10MM SPECTRA BRAID - 4500KG FIB-12SPECTRA – 12MM SPECTRA BRAID – 5400KG

!! DYNEEMA AND OTHER EXOTIC ROPES AVAILABLE !!

!! SPECTRA IN MULTIPLE OF 100MTRS – EYE SPLICE AVAILABLE !!

4


oZietler Electric String Blower

oZietler Electric String Blower


oZeitler ULP String Blower

ORDERING INFO

EZ50 – ELECTRIC POWERED STRING BLOWER / SUCKER.

BLOW IN OR SUCK PULL SUITABLE FOR 18 – 50 MM INSIDE DIAMETER EASY AND SAFE TO HANDLE SMALL & LIGHTWEIGHT AVAILABLE KIT PACKAGED

!! ASK SALES FOR MORE INFORMATION !!

ORDERING INFO

EZ100 – ELECTRIC POWERED STRING BLOWER / SUCKER

BLOW IN OR SUCK PULL ( PULL TENSION 300KG !! ) SUITABLE FOR 50 – 100 MM INSIDE DIAMETER DUCT ACCESSORIES AVAILABLE FOR SMALLER DUCT CAPABLE OF 1000MTR + !! SMALL & LIGHTWEIGHT AVAILABLE KIT PACKAGED

!! ASK SALES FOR MORE INFO !!

ORDERING INFOEZ300 – PETROL POWERED STRING BLOWER / SUCKER

BLOW IN OR SUCK PULL ( PULL TENSION 300KG !! ) SUITABLE FOR 50 – 100 MM INSIDE DIAMETER DUCT CAPABLE OF 1000MTR + !! SMALL & LIGHTWEIGHT AVAILABLE KIT PACKAGED

!! ASK SALES FOR MORE INFO !!

5


oRoping Gun & Electric Blower

oRoping Gun


oBalloons, Line bags & Darts

ORDERING INFO

DB102 – ELECTRIC POWERED STRING BLOWER –3.5CFM – 2 STAGE MOTOR 1300WATT

DPL-400 – PRESSURE ROPING GUN

NOTE: SEAL OFFS AND ADAPTORS FOR THE ROPING GUN ARE AVAILABLE TO SUIT CONDUIT 32MM – 150MM

!! ASK SALES FOR MORE INFORMATION !!

ORDERING INFO

VAN-DBL050 – 50MM BALLOON VAN-DBL100 – 100MM BALLOON VAN-DBL125 – 125MM BALLOON VAN-DBL150 – 150MM BALLOON

VAN-DCB050 – 50MM BAG VAN-DCB100 – 100MMM BAG VAN-DCB-125 – 125MM BAG VAN-DCB-150 – 150MM BAG

SLEM2000 – DART – 38 – 50MM SLEM4000 – DART – 85 – 100MM SLEM5000 – DART – 110 – 125MM

ORDERING INFO

DPL-400 – PRESSURE ROPING GUN (ONLY) DPL-500 – PRESSURE ROPING GUN KIT – ROPING GUN, 5 X SEAL OFFS, 5 X DRAWLINE GROMMETS, TOOL BOX.

NOTE: INNERDUCT EXPANDABLE SEAL OFFS AVAILABLE 50 , 80 , 100, 125 & 150MMIMAGE SHOWN WITH CONE

SEALER ACCESSORY

6


oTraceable Rodders – 4.5 & 6mm O/D

oTraceable Rodders – 9 & 11mm O/D


ORDERING INFO ATM-45TR60 – RODDER &FRAME – 4.5MM X 60MTR ATM-45TR80 – RODDER & FRAME – 4.5MM X 80MTR

ATM-6TR100 – RODDER & FRAME – 6MM X 100MTR ATM-6TR120 – RODDER & FRAME – 6MM X 120MTR

ACCESSORIES ATM-4.5-FLEX – FLEXIBLE LEADER – 4.5MM ATM-6-FLEX – FLEXIBLE LEADER – 6MM ATM-4.5JK – REPAIR KIT FOR 4.5MM ATM-6JK – REPAIR KIT FOR 6MM

DIMENSIONS ATM-45TR60 – 560 X 180 X 380 - 3.5KG ATM-45TR80 - 560 X 180 X 380 – 4KG ATM-6TR100 - 620 X 190 X 510 – 7KG ATM-6TR120 - 620 X 190 X 510 – 8KG

ORDERING INFO



ACCESSORIES ATM-9-FLEX – FLEXIBLE LEADER – 9MM ATM-11-FLEX – FLEXIBLE LEADER – 11MM ATM-9JK – REPAIR KIT FOR 9MM ATM-11JK – REPAIR KIT FOR 11MM

DIMENSIONS ATM-9TR125 – 360 X 185 X 550 - 4.4KG ATM-9TR150 - 360 X 185 X 550 – 4.8KG ATM-11TR200 - 630 X 530 X 220 – 10.4KG ATM-11TR250 - 630 X 530 X 220 – 12KG

!! ABOVE ROD LENGTHS ARE THE MOST COMMONLY SOLD !!

7


oHand Rods – 22mm x 3mtr

oHand Rod Kits


ORDERING INFO VAN-HR – HAND ROD – SECTIONAL 22MM X 3MTR WITH BRASS MALE & FEMALE ENDS

ACCESSORIES

TCH-22MF – CRANK HANDLE THL-2290 – HOOK & LOOP TRE-22 – LEADING EYE / HAULING EYE

8

ORDERING INFO

• ATM-AS10MTV

PUSH / PULL 10 X 1MTR BASALT FIBRE ROD SET IN STORAGE BAG WITH ACCESSORY KIT.

10 X 1MTR BASALT FIBRE RODS FITTED WITH MALE & FEMALE END FITTINGS

3 X 6.6mm , 3 X 5.6mm , 3 X 4.6mm & 1 X 4mm ( Nylon ) O/D * ALL CONNECTABLE.

10 PCE ACCESSORY KIT – INCLUDES:- SUPER BEAM LED , HOOK , CHAIN , GRIP , MAGNET , PULLING EYELET, ADAPTOR , FLEX END, THREADER & STARTER END

BASALT FIBRE IS SIMILAR TO CARBON FIBRE & FIBREGLASS – IT HAS BETTER PHYSIOCHEMICAL PROPERTIES THAN FIBREGLASS AND IS CHEAPER THAN

CARBON FIBRE.


oRolly Winch


oCapstan Electric Winch – 2500kg Line Pull

ORDERING INFO ROLLY WINCH – 4HP 4 STROKE CAPSTAN WINCH, SAFTY STOP SWITH, 25:1 RATIO TRANSMISSION. – WEIGHS 35KG

CONTINUOUS – 1.8KN LINE PULLMAXIMUM - 3.5KN LINE PULL TOW BALL ATTACHMENT

ORDERING INFO

H2500 – 240V TWIN CAPSTAN WINCH – WITH FOOT SWITCH

ELECTRIC WINCH HAS 2 CAPSTANS –1. LARGER CAPSTAN OFFERS 2.5TONNE

USEABLE PULLING POWER @ 2.5MTRS PER MINUTE

2. SMALLER CAPSTAN OFFERS 1.5TONNE OF USEABLE PULLING POWER @ 4MTRS PER MINUTE

2.5MTRS PER MINUTE AT 2500KG 4MTRS PER MINUTE AT 1500KG ROPE DIVERTOR ROPE REELER FOOT SWITCH

GEAR RATIO - 154:1 MAXIMUM PULLING DURATION – 15M NET WEIGHT – 60KG WIDTH – 540MM LENGTH – 655MM HEIGHT - 850MM MINIMUM WRAPS TO SUPPORT FULL LOAD – 6

9


oCapstan Petrol Winch – 1136kg Line Pull


ORDERING INFO BPC1136 – 4 STROKE -2.5HP PORTABLE CAPSTAN WINCH

1136KG CAPACITY SINGLE LINE @ UP TO 12MTRS PER MINUTE. – USING STANDARD 57MM CAPSTAN

WEIGHS ONLY 15KG

OPTIONAL LARGER 85MM CAPSTAN AVAILABLE TO INCREASE PULL SPEED ( HOWEVER THIS LOWERS CAPACITY ) TOW BALL ADAPTORS AVAILABLE HITCH BAR ADAPTOR AVAILABLE POLE MOUNT ADAPTOR AVAILABLE

IMAGE SHOWING WINCH WITH HITCH ACCESSORY

USE AS A HOIST

o Accessories BPC5250 – 85MM CAPSTAN BPC5150 –ROUND TOWBALL BPC5250 – SQUARE ADJUSTABLE

10

ORDERING INFO

BPC100B – 4 STROKE -2.5HP PORTABLE CAPSTAN HOIST / WINCH

450KG HOISTING CAPACITY SINGLE LINE

!! ALL OTHER SPECIFICATION AND AVAILABLE ACCESSORIES ARE AS PER # BPC1136 !!

“Service, Knowledge, Experience” A – Z Industry & Trade Solutions

oHydraulic Cable Laying Winch – 2000kg

oHYDRAULIC CABLE LAYING WINCH – 4500KG


ORDERING INFO VM1500DCOM – 17HP DIESEL POWERED HYDRAULIC U/G CABLE HAULING DRUM WINCH WITH A 2000KG MAXIMUM PULL

DUAL HEADMULTI GROOVED CAPSTANS DYNAMOMETER FITTED PRE-SETTABLE PULLING FORCE DEAD MAN LEVER SPEED ADJUSTABLE UP TO 50MTR PER MINUTE STORES 500MTRS OF 8MM (4400KG) WIRE ROPE ( SUPPLIED )

ORDERING INFO VM4000SLD – 33HP DIESEL POWERED HYDRAULIC U/G CABLE HAULING WINCH WITH A 4500KG MAXIMUM PULL

DUAL HEADMULTI GROOVED CAPSTANS DYNAMOMETER FITTED PRE-SETTABLE PULLING FORCE DEAD MAN LEVER SPEED ADJUSTABLE UP TO 50MTR PER MINUTE STORES UP TO 1000MTRS OF 11MM (9400KG) WIRE ROPE ( SUPPLIED )

11


oHYDRAULIC FIBRE CABLE WINCH – SKID MOUNT


ORDERING INFO

C1045AU – 18HP PETROL POWERED HYDRAULIC FIBRE OPTIC PULL & ASSIST WINCH WITH A 500KG MAXIMUM PULL

LARGE O/D WIDE FACED CAPSTAN OPTION OF SECOND CAPSTAN WITH SMALLER DIAMETER FOR WORK UP TO 10KN ROPE TAKE UP SPINDLE WITH REMOVABLE SIDE, FOR TRUE ONE MAN OPERATION PRE-SETTABLE PULLING FORCE UP TO 5KN SUPPLIED WITH LOCKED PRE-SET 2.2KN SAFETY VALVE SPEED ADJUSTABLE UP TO 50MTR PER MINUTE 3 SEPARATE HYDRAULIC TRANSMISSION PUMPS FITTED FOR CONSISTANT PULL

FORCE TILTABLE CAPSTAN THROUGH 90 DEGREES WINCH IN CONTROL STICK IS “DEAD MAN” STYLE FOR SAFETY RUNNING TENSION METER INSTALLED. SKID SIZE – L1880MM X W1165MM X H1100MM FOR MOUNTING TO TRUCK BED

OR UTE TRAY

!! SPECIALIST FIBRE INSTALLATION !!

12


oFIBRE OPTIC CABLE BLOWING MACHINE


ORDERING INFO

MULTIFLOW – HYDRAULIC / PNEUMATIC CABLE BLOWER.

SPECIFICATIONS:o CABLE DIAMETER – 8 – 32MMo DUCT DIAMETER – 18 – 70MMo BLOWING DISTANCE <10Ko MAXIMUM SPEED – 80M / MIN

PRESSURE & FLOW REQUIREMENTS – 8 –12BAR @ 8000 – 12000 LPM FLOW ( 230 – 340 CFM)

SUITABLE FOR BLOWING MICRO DUCTS AS WELL AS CABLE

oAIR BLOWN FIBRE OPTIC CABLE

ORDERING INFO

MICROFLOW TOUCH – HYDRAULIC / PNEUMATIC CABLE BLOWER , “UNIQUE FIBRE PROTECTION TECHNOLOGY”

SPECIFICATIONS:o CABLE DIAMETER – 0.8 – 32MMo DUCT DIAMETER – 5 – 16MMo BLOWING DISTANCE <2.5Ko MAXIMUM SPEED – 100M / MIN

PRESSURE & FLOW REQUIREMENTS – 8 – 16BAR @ 200 – 500 LPM FLOW ( 6 – 14 CFM)

SUITABLE FOR BLOWING MICRO DUCTS.

!! UNIQUE FIBRE PROTECTION TECHNOLOGY !!

13


oFIBRE OPTIC CABLE BLOWING MACHINE


ORDERING INFO

MICROFLOW TOUCH – HYDRAULIC / PNEUMATIC CABLE BLOWER , “UNIQUE FIBRE PROTECTION TECHNOLOGY”

SPECIFICATIONS:o CABLE DIAMETER – 4 - 12MMo DUCT DIAMETER – 7 - 20MMo BLOWING DISTANCE <3.5Ko MAXIMUM SPEED – 100M / MIN

PRESSURE & FLOW REQUIREMENTS – 8 – 16BAR @ 200 – 500 LPM FLOW ( 6 – 14 CFM)

oACCESSORIES

Compressors available to suit your chosen blowing solution

Air Coolers & Driers available

Hydraulic Powerpacks and Control Valves available

High Pressure Soft Flex and Flat type hose available

Lubes available

Traceable Proving Mandrels available

Cable Mouse available

14


ORDERING INFO :

SWI-16 – 16MM O/D x 88MM 6KN MAX (CLEVIS 8.6MM) SWI-22 – 22MM O/D X 114MM 10KN MAX (CLEVIS 10MM) SWI-33 – 33MM O/D X 144MM 18KN MAX (CLEVIS 16.8MM) SWI-40 – 40MM O/D X 173MM 37.8KN MAX (CLEVIS 22.3MM) SWI-60 – 60MM O/D X 250MM97.85KN MAX (CLEVIS 25.4)

oHauling Swivels & Fuses

"A - Z Product solutions to trade and industry” 15


ORDERING INFO :

SWI-16 – 16MM O/D x 88MM 6KN MAX (CLEVIS 8.6MM) SWI-22 – 22MM O/D X 114MM 10KN MAX (CLEVIS 10MM) SWI-33 – 33MM O/D X 144MM 18KN MAX (CLEVIS 16.8MM) SWI-40 – 40MM O/D X 173MM 37.8KN MAX (CLEVIS 22.3MM) SWI-60 – 60MM O/D X 250MM97.85KN MAX (CLEVIS 25.4)

oHauling Swivels & Fuses

"A - Z Product solutions to trade and industry” 16


o Stainless Steel & Galvanised Quick Links


oProving Mandrels

STAINLESS ORDERING INFO:-

GALVANISED ORDERING INFO:-

ORDERING INFO :- PM12 – PROVING MANDREL – 12MM O/D X 50MM PM15 – PROVING MANDREL – 15MM O/D X 50MM PM18 – PROVING MANDREL – 18MM O/D X 50MM PM22 – PROVING MANDREL – 22MM O/D X 60MM PM25 – PROVING MANDREL – 25MM O/D X 60MM PM30 – PROVING MANDREL – 30MM O/D X 60MM PM32 – PROVING MANDREL – 32MM O/D X 60MM PM40 – PROVING MANDREL – 40MM O/D X 80MM PM48 – PROVING MANDREL – 48MM O/D X 80MM PM60 – PROVING MANDREL – 60MM O/D X 100MM

! MANY MORE MANDREL SIZES AVAILABLE – PLEASE ASK !

17


o Wire Brush Mandrel


ORDERING INFO:-

WBM-050 – WIRE BRUSH MANDREL – 50MM WBM-080 – WIRE BRUSH MANDREL – 80MM WBM-100 – WIRE BRUSH MANDREL – 100MM WBM-125 – WIRE BRUSH MANDREL – 125MM WBM-150 – WIRE BRUSH MANDREL – 150MM WBM-200 – WIRE BRUSH MANDREL – 200MM

A Rodding Truck from early 20th Century

17


ORDERING INFO

NATCG1014 – SUIT 10 – 14MM – 5KN UTS NATCG1419 – SUIT 14 – 19MM – 9KN UTS NATCG1928 – SUIT 19 – 28MM – 15KN UTS NATCG2840 – SUIT 28 – 40MM – 24KN UTS NATCG4055 – SUIT 40 – 55MM – 35KN UTS NATCG5575 – SUIT 55 – 75MM – 62KN UTS NATCG7595 – SUIT 75 – 95MM – 98KN UTS

oSingle Eye Standard Duty Cable Grip

oSingle Eye Heavy Duty Cable Grip with Copper Shoulder & Coloured


ORDERING INFO

NAT-HDGW10CS – SUIT 10 – 15MM – 750MM LENGTH - 37KN UTS - GREEN NAT-HDGW15CS – SUIT 15 – 21MM – 810MM LENGTH - 57KN UTS - BLACK NAT-HDGW20CS – SUIT 20 – 29MM – 1040MM - 73KN UTS - BLUE NAT-HDGW27CS – SUIT 27 – 35MM – 1160MM -101KN UTS - ORANGE NAT-HDGW32CS – SUIT 32 - 37MM – 1160MM LENGTH - 101KN UTS -

!! STANDARD HD GRIPS ALSO AVAILABLE !!

oSingle Eye Kevlar Cable Socks

ORDERING INFO

C8010 – SUIT 10 – 14MM – 350MM 12KN UTS / 4KN WLL C8014 – SUIT 14 – 19MM – 400MM 12KN UTS / 4KN WLL C8019 – SUIT 19 – 28MM – 500MM 18KN UTS / 6KN WLL C8028 – SUIT 28 – 40MM – 600MM 30KN UTS / 10KN WLL C8040 – SUIT 40 – 55MM – 800MM 36KN UTS / 12KN WLL

18



OTHER CABLE GRIP TYPES AVAILABLE:-

KEVLARSTAINLESS STEELOFFSET EYEDOUBLE EYETHIMBLE EYECOPPER FERULE

19


oManhole Roller Guides

oPivoting Manhole Roller Guides

oBellmouth Conduit Guides


ORDERING INFO :-

MRG-140 – MANHOLE ROLLER GUIDE – 1 X 140MM ALUMINIUM ROLLER

MRG140/2 -MANHOLE ROLLER GUIDE – 2 X 140MM ALUMINIUM ROLLER

MRG140/2 -MANHOLE ROLLER GUIDE – 3 X 140MM ALUMINIUM ROLLER

ORDERING INFO

MPRG-140 – PIVOTING MANHOLE ROLLER GUIDE – 3 X 140MM ALUMINIUM ROLLERS

!! SPECIAL ROLLER GUIDES CAN BE FABRICATED TO ORDER !!

!! PVC ROLLERS ALSO AVAILABLE !!

ORDERING INFO

BM095 – BELL MOUTH – SUIT 100MM CONDUIT



20


oConduit Slipper Guide

oLockable Slipper Guides


oLockable Conduit Roller Guide

ORDERING INFO:-

SRG040 – LOCKABLE ROLLER GUIDE – SUIT 50MM O/D SRG046 – LOCKABLE ROLLER GUIDE – SUIT COMMS 50MM SRG095 – LOCKABLE ROLLER GUIDE – SUIT 100MM I/D SRG115 – LOCKABLE ROLLER GUIDE – SUIT 125MM I/D SRG140 – LOCKABLE ROLLER GUIDE – SUIT 150MM I/D SRG200 – LOCKABLE ROLLER GUIDE – SUIT 200MM O/D

ORDERING INFO:-

CLS100 – LOCKABLE SLIPPER GUIDE – 100MM



ORDERING INFO:-

CS035 – SLIPPER GUIDE – 35MM CS050 – SLIPPER GUIDE – 50MM CS080 – SLIPPER GUIDE – 80MM CS095 – SLIPPER GUIDE – 100MM CS125 – SLIPPER GUIDE – 125MM CS150 – SLIPPER GUIDE – 150MM

21


oTrench Rollers Corner

oTrench Rollers - Flat

oTrench Rollers - Flat


ORDERING INFO:-

TCR – TRENCH CORNER ROLLER – 200KG W.L.LWEIGHS 11KG

2 X VERTICAL 60MM O/D TUBE ROLLERS WITH BEARINGS

1 X HORIZONTAL 60MM O/D TUBE ROLLER WITH BEARINGS

USE STANDARD STAR PICKETS WITH GROUND SECURING HOLES AND CARRY HANDLE

ORDERING INFO:-

NTRA -TRENCH ROLLER WITH 140MM ALUMINIUM ROLLER

NTRPVC - TRENCH ROLLER WITH 140MM HIGH IMPACT PVC ROLLER

CTRA160 - TRENCH ROLLER WITH 140MM ALUMINIUM ROLLER

ORDERING INFO:-

oTrench Rollers - Raised

ORDERING INFO:-

TSR-140 - RAISED TRENCH ROLLER WITH 140MM ALUMINIUM ROLLER

22


oCable Tray Rollers

oCable Tray Rollers

oRoller Guide


ORDERING INFO:- CTR-050 – CORNER ROLLER FOR TRAY

CAN BE BOLTED & MOUNTED FOR RADIUS TO EASE CABLE AROUND CHANGES OF DIRECTION

SUIT UP TO 50MM O/D CABLE

ORDERING INFO:- CTR-080 – TWIN ROLLER FOR TRAY

CAN BE USED TO EASE CABLE FROM HORIZONTAL TO VERTICAL DIRECTION

SUIT UP TO 80MM O/D CABLE

CRG-080 – CABLE ROLLER GUIDE – 80MM SQUARE CRG-165 – CABLE ROLLER GUIDE – 165MM SQUARE

CAN BE BOLTED DOWN & MOUNTED TO TRAY / LADDER TOP ROLLER CAN BE REMOVED

ORDERING INFO:-

oTray Roller Flat

ORDERING INFO:- CTRA160-TRENCH ROLLER WITH 140MM AL ROLLER

3 ROWS OF MOUNTING HOLES EACH SIDE PVC ROLLERS AVAILABLE

oTray Roller Flat

ORDERING INFO:- CTRSO160-TRENCH ROLLER WITH 140MM AL

ROLLER & SIDE ARMS

ADJUSTABLE SIDE ARMS

23


ORDERING INFO:- SL2 – SCISSOR LIFT DRUM JACK SET –

2TONNE CAPACITY

NATA PROOF TESTED TO 4TONNE SUPPLIED WITH 2 X 60MM AXLES (2.5MTR)

& 2 X RETAINING COLLARS EACK LIFT HAS WHEELS AND CARRY

HANDLES FOR EASE OF MANOUVERING 12 MONTH WARRANTY ON WORKMANSHIP

oScissor Lift Drum Stands

oHydraulic Cable Drum Stands


ORDERING INFO:- DJS-58T – 8 TONNE HYDRAULIC LIFT

DRUM JACK SET

PLATED 8,000KG AND SUPPLIED WITH CERTIFICATE

SUPPLIED WITH 90MM AXLE AS STANDARD 3 X RETAINING COLLARS

SUPPLIED WITH 2 X DRUM CONES AND 3 X RETAINING COLLARS

CARRY HANDLES FOR EASE OF MANOUVERING

12 MONTH WARRANTY ON WORKMANSHIP

OPTIONAL DISC BRAKE ACCESSORY AVAILABLECALL SALES FOR MORE INFO.

24


ORDERING INFO:-

CDT-500 – FOLDAWAY & LIGHTWEIGHT, HANDLES DRUMS UP TO 500KG – WITH A MAXIMUM WIDTH OF 900MM

SUPPLIED WITH SPINDLE & LOCKING COLLARS (4) PNEUMATIC TYRES 4 MOUNTING POSITIONS

oDrum Handling Trolley

oDrum Ramp Rails

oDrum Handling Trolley


ORDERING INFO:-

DRR-1000 – SIMPLE EASY TO USE RAMP ROLLERS FOR USE ON FLAT SURFACES, THESE HAVE A 1000KG WLL AND A MAX DRUM DIAMETER OF 1700MM (MIN 400MM)

DIMENSIONS – 1350 X 210 X 250 FOLDED DIMENSIONS – 750 X 210 X 210

ORDERING INFO:-

CDC-500 – WITH ROLLED ARCHED AND LUBRICATED BLOCKS, THIS TROLLEY HAS A LIFT RATION OF 7:1 - FOR DRUMS UP TO 500Kg

DIMENSIONS – 1410 X 1300 X 855 MAX DRUM – 1200MM X 950MM SWIVELING AND LOCKING WHEEL

25


ORDERING INFO:-

oQuick Flick Pop up Telecom Tents

oQuick Flick Pop up Telecom Tents

oQuick Flick Fibre Optic Splicers Tent


“D” Style -

ORDERING INFO:-

ORDERING INFO:-

“A” Style

6506D – 1.8M X 1.8M – WEIGHS 9.5KG – 15CM X 142CM FOLDED

6508D – 2.4M X 2.4M – WEIGHS 14.5KG – 18CM X 168CM FOLDED

HEAVY DUTY FRAME DUAL ZIP ROLL UP WIDE DOOR INTERCONNECT WITH OTHER “D” STYLE TENT VENTILATION HOSE ENTRY SLEEVE 2 SCREENED WINDOWS WITH ROLL UP FLAPS

6506A – 1.8M X 1.8M – WEIGHS 9KG – 15CM X 142CM FOLDED

6508A – 2.4M X 2.4M – WEIGHS 14KG – 18CM X 168CM FOLDED

HEAVY DUTY FRAME DUAL ZIP ROLL UP WIDE DOOR VENTILATION HOSE ENTRY SLEEVE 2 SCREENED WINDOWS WITH ROLL UP FLAPS

6506FO – 1.8M X 1.8M – WEIGHS 10KG – 15CM X 142CM FOLDED

6508FO – 2.4M X 2.4M – WEIGHS 15KG – 18CM X 168CM FOLDED

SOLID WHITE INTERNAL WALLS AND FLOOR CONSTRUCTED FROM ACRYLIC FOR “BREATHABILITY” AND “INCREASED LIGHT”

CABLE SLOTS WITH VELCRO CLOSURES. PORTABLE AIR CONDITIONERS AND HEATERS

AVAILABLE “Fibre Optic Splicers Tent”

26


ORDERING INFO:-

LUBRICANT POLYMER FOR HEAVY CABLE HAULING

CHG20 – 20LTR CONTAINER CHG200 - 200LTR CONTAINERS (SPECIAL ORDER)

PUMP OR HAND APPLY WATER BASED – EASY CLEAN UP (ENVIRO FRIENDLY) HIGH SHEAR RESISTANCE UNDER HIGH SIDEWALL

PRESSURE HIGH CLING FACTOR SLOW DRYING

oCable Hauling Lube - PREMIUM

oCable Hauling Lube – GENERAL P

oLube Pump


ORDERING INFO:-

LUBRICANT POLYMER FOR LIGHTER CABLE HAULING

CHL20 – 20LTR CONTAINER CHL200 – 200LTR CONTAINER

PUMP POUR OR HAND APPLY WATER BASED – EASY CLEAN UP (ENVIRO FRIENDLY)

ORDERING INFO:-

LP-D5– PRACTICAL AND CLEAN TRANSFER OF HAULING LUBRICANT

USE STANDARD POWER TOOLS *NON IMPACT EASY MAINTENANCE – CLEANS UP WITH WATER CORROSION RESISTANT

27

Catalogue 2017 -...

Documents

Transcript of Catalogue 2017 -...