catalog.pdf
Transcript of catalog.pdf
D-2RIGHT ANGLE DRIVEKLEIN CLAMPVEEDERROOTCOUNTERThe Veeder Root Counter isattached to the counter headdirectly or by means ofremote cable. It allows theoperator to know the depthof the tool string duringwireline operations as thewire proceeds through thecounter head assembly. Thecounter is available formeasurement in feet ormeters.A right angle drive allows anoperator to separate theVeeder Root Counter fromthe counter head using anodometer type cable. Theright angle drive unit canalso be used to change theratio between the counterhead and the Veeder RootCounter.The Klein Wireline Clamp isa lightweight, economicalgrip designed for bare wireapplications. The clamp canbe used for manuallyworking the wire oranchoring the wire duringvarious wireline operations.D-48COUNTERHEAD ASSEMBLYA Counterhead Assembly is a device used for measuring downhole length ofslickline.The slickline is placed in the counter wheel groove while tension isapplied by the adjustable pressure wheels. The pressure wheels are adjustableto exert the correct amount of force needed for an accurate measurement.Aveeder root counter may be attached directly to the Counterhead spindle orattached remotely to display the downhole measurement.*PRICES AVAILABLEUPONREQUEST