Page is color controlled with Prinect Printready ColorCarver 3.0.91 Copyright 2005 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): ISOcoated.icc RGB Image: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: no Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: All Colors to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: no Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: yes
Prinect Printready Trapper
Page is trapped with Prinect Printready Trapper 5.0.91 Copyright 2005 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document traps, with the free Trap Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Settings: Width: 0.028 mm = 0.080 pt Printorder: Black / Cyan / Magenta / Yellow / Step Limit: 25.0% Common Density Limit: 0.50 Centerline Trap Limit: 100% Trap Color Scaling: 100.0% Image to Object Trapping: yes Image to Image Trapping: no Black Width Scaling: 100.0% Black Color Limit: 95.0% Overprint Black Text: 12.0 pt Overprint Black Strokes: no Overprint Black Graphics: no
MGuideConseil2011_ITAL_ok.indd 3-4
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 3.0.91 Copyright 2005 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): ISOcoated.icc RGB Image: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: no Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: All Colors to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: no Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: yes
Prinect Printready Trapper
Page is trapped with Prinect Printready Trapper 5.0.91 Copyright 2005 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document traps, with the free Trap Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Settings: Width: 0.028 mm = 0.080 pt Printorder: Black / Cyan / Magenta / Yellow / Step Limit: 25.0% Common Density Limit: 0.50 Centerline Trap Limit: 100% Trap Color Scaling: 100.0% Image to Object Trapping: yes Image to Image Trapping: no Black Width Scaling: 100.0% Black Color Limit: 95.0% Overprint Black Text: 12.0 pt Overprint Black Strokes: no Overprint Black Graphics: no
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 3.0.91 Copyright 2005 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): ISOcoated.icc RGB Image: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: no Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: All Colors to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: no Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: yes
Prinect Printready Trapper
Page is trapped with Prinect Printready Trapper 5.0.91 Copyright 2005 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document traps, with the free Trap Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Settings: Width: 0.028 mm = 0.080 pt Printorder: Black / Cyan / Magenta / Yellow / Step Limit: 25.0% Common Density Limit: 0.50 Centerline Trap Limit: 100% Trap Color Scaling: 100.0% Image to Object Trapping: yes Image to Image Trapping: no Black Width Scaling: 100.0% Black Color Limit: 95.0% Overprint Black Text: 12.0 pt Overprint Black Strokes: no Overprint Black Graphics: no
MGuideConseil2011_ITAL_ok.indd 5-6
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 3.0.91 Copyright 2005 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): ISOcoated.icc RGB Image: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: no Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: All Colors to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: no Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: yes
Prinect Printready Trapper
Page is trapped with Prinect Printready Trapper 5.0.91 Copyright 2005 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document traps, with the free Trap Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Settings: Width: 0.028 mm = 0.080 pt Printorder: Black / Cyan / Magenta / Yellow / Step Limit: 25.0% Common Density Limit: 0.50 Centerline Trap Limit: 100% Trap Color Scaling: 100.0% Image to Object Trapping: yes Image to Image Trapping: no Black Width Scaling: 100.0% Black Color Limit: 95.0% Overprint Black Text: 12.0 pt Overprint Black Strokes: no Overprint Black Graphics: no
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 3.0.91 Copyright 2005 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): ISOcoated.icc RGB Image: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: no Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: All Colors to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: no Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: yes
Prinect Printready Trapper
Page is trapped with Prinect Printready Trapper 5.0.91 Copyright 2005 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document traps, with the free Trap Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Settings: Width: 0.028 mm = 0.080 pt Printorder: Black / Cyan / Magenta / Yellow / Step Limit: 25.0% Common Density Limit: 0.50 Centerline Trap Limit: 100% Trap Color Scaling: 100.0% Image to Object Trapping: yes Image to Image Trapping: no Black Width Scaling: 100.0% Black Color Limit: 95.0% Overprint Black Text: 12.0 pt Overprint Black Strokes: no Overprint Black Graphics: no
Compati bile con l’allatt a-
mento
MGuideConseil2011_ITAL_ok.indd 7-8
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 3.0.91 Copyright 2005 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): ISOcoated.icc RGB Image: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: no Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: All Colors to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: no Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: yes
Prinect Printready Trapper
Page is trapped with Prinect Printready Trapper 5.0.91 Copyright 2005 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document traps, with the free Trap Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Settings: Width: 0.028 mm = 0.080 pt Printorder: Black / Cyan / Magenta / Yellow / Step Limit: 25.0% Common Density Limit: 0.50 Centerline Trap Limit: 100% Trap Color Scaling: 100.0% Image to Object Trapping: yes Image to Image Trapping: no Black Width Scaling: 100.0% Black Color Limit: 95.0% Overprint Black Text: 12.0 pt Overprint Black Strokes: no Overprint Black Graphics: no
Utilizzare dopo il parto, applicazione locale
Utilizzare fin dall’inizio della gravidanza e dopo il parto
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 3.0.91 Copyright 2005 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): ISOcoated.icc RGB Image: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: no Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: All Colors to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: no Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: yes
Prinect Printready Trapper
Page is trapped with Prinect Printready Trapper 5.0.91 Copyright 2005 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document traps, with the free Trap Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Settings: Width: 0.028 mm = 0.080 pt Printorder: Black / Cyan / Magenta / Yellow / Step Limit: 25.0% Common Density Limit: 0.50 Centerline Trap Limit: 100% Trap Color Scaling: 100.0% Image to Object Trapping: yes Image to Image Trapping: no Black Width Scaling: 100.0% Black Color Limit: 95.0% Overprint Black Text: 12.0 pt Overprint Black Strokes: no Overprint Black Graphics: no
Utilizzare fin dall’inizio della gravidanza
MGuideConseil2011_ITAL_ok.indd 9-10
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 3.0.91 Copyright 2005 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): ISOcoated.icc RGB Image: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: no Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: All Colors to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: no Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: yes
Prinect Printready Trapper
Page is trapped with Prinect Printready Trapper 5.0.91 Copyright 2005 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document traps, with the free Trap Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Settings: Width: 0.028 mm = 0.080 pt Printorder: Black / Cyan / Magenta / Yellow / Step Limit: 25.0% Common Density Limit: 0.50 Centerline Trap Limit: 100% Trap Color Scaling: 100.0% Image to Object Trapping: yes Image to Image Trapping: no Black Width Scaling: 100.0% Black Color Limit: 95.0% Overprint Black Text: 12.0 pt Overprint Black Strokes: no Overprint Black Graphics: no
Utilizzare fin dall’inizio della gravidanza
Utilizzare fin dall’inizio della gravidanza
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 3.0.91 Copyright 2005 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): ISOcoated.icc RGB Image: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: no Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: All Colors to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: no Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: yes
Prinect Printready Trapper
Page is trapped with Prinect Printready Trapper 5.0.91 Copyright 2005 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document traps, with the free Trap Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Settings: Width: 0.028 mm = 0.080 pt Printorder: Black / Cyan / Magenta / Yellow / Step Limit: 25.0% Common Density Limit: 0.50 Centerline Trap Limit: 100% Trap Color Scaling: 100.0% Image to Object Trapping: yes Image to Image Trapping: no Black Width Scaling: 100.0% Black Color Limit: 95.0% Overprint Black Text: 12.0 pt Overprint Black Strokes: no Overprint Black Graphics: no
Utilizzare fin dal parto, per allattare in tutta serenità
MGuideConseil2011_ITAL_ok.indd 11-12
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 3.0.91 Copyright 2005 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): ISOcoated.icc RGB Image: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: no Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: All Colors to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: no Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: yes
Prinect Printready Trapper
Page is trapped with Prinect Printready Trapper 5.0.91 Copyright 2005 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document traps, with the free Trap Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Settings: Width: 0.028 mm = 0.080 pt Printorder: Black / Cyan / Magenta / Yellow / Step Limit: 25.0% Common Density Limit: 0.50 Centerline Trap Limit: 100% Trap Color Scaling: 100.0% Image to Object Trapping: yes Image to Image Trapping: no Black Width Scaling: 100.0% Black Color Limit: 95.0% Overprint Black Text: 12.0 pt Overprint Black Strokes: no Overprint Black Graphics: no
Crema gel - utilizzare fin dal parto
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 3.0.91 Copyright 2005 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): ISOcoated.icc RGB Image: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: no Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: All Colors to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: no Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: yes
Prinect Printready Trapper
Page is trapped with Prinect Printready Trapper 5.0.91 Copyright 2005 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document traps, with the free Trap Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Settings: Width: 0.028 mm = 0.080 pt Printorder: Black / Cyan / Magenta / Yellow / Step Limit: 25.0% Common Density Limit: 0.50 Centerline Trap Limit: 100% Trap Color Scaling: 100.0% Image to Object Trapping: yes Image to Image Trapping: no Black Width Scaling: 100.0% Black Color Limit: 95.0% Overprint Black Text: 12.0 pt Overprint Black Strokes: no Overprint Black Graphics: no
Da 60 anni, il prodotto indispensabile di Mustela®
Un gesto di freschezza
MGuideConseil2011_ITAL_ok.indd 13-14
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 3.0.91 Copyright 2005 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): ISOcoated.icc RGB Image: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: no Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: All Colors to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: no Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: yes
Prinect Printready Trapper
Page is trapped with Prinect Printready Trapper 5.0.91 Copyright 2005 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document traps, with the free Trap Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Settings: Width: 0.028 mm = 0.080 pt Printorder: Black / Cyan / Magenta / Yellow / Step Limit: 25.0% Common Density Limit: 0.50 Centerline Trap Limit: 100% Trap Color Scaling: 100.0% Image to Object Trapping: yes Image to Image Trapping: no Black Width Scaling: 100.0% Black Color Limit: 95.0% Overprint Black Text: 12.0 pt Overprint Black Strokes: no Overprint Black Graphics: no
Deterge in un solo gesto senza risciacquare
Per profumare delicatamente il vostro bebè
Ideali per le passeggiate grazie al piccolo formato
e alla pratica apertura
30/09/10 13:28:59
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 3.0.91 Copyright 2005 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): ISOcoated.icc RGB Image: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: no Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: All Colors to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: no Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: yes
Prinect Printready Trapper
Page is trapped with Prinect Printready Trapper 5.0.91 Copyright 2005 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document traps, with the free Trap Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Settings: Width: 0.028 mm = 0.080 pt Printorder: Black / Cyan / Magenta / Yellow / Step Limit: 25.0% Common Density Limit: 0.50 Centerline Trap Limit: 100% Trap Color Scaling: 100.0% Image to Object Trapping: yes Image to Image Trapping: no Black Width Scaling: 100.0% Black Color Limit: 95.0% Overprint Black Text: 12.0 pt Overprint Black Strokes: no Overprint Black Graphics: no
Utilizzare per i neonati e i bebè fin dalla nascita (2)
Utilizzare per i bebè e i bambini : ideale per gli spostamenti
MGuideConseil2011_ITAL_ok.indd 15-16
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 3.0.91 Copyright 2005 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): ISOcoated.icc RGB Image: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: no Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: All Colors to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: no Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: yes
Prinect Printready Trapper
Page is trapped with Prinect Printready Trapper 5.0.91 Copyright 2005 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document traps, with the free Trap Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Settings: Width: 0.028 mm = 0.080 pt Printorder: Black / Cyan / Magenta / Yellow / Step Limit: 25.0% Common Density Limit: 0.50 Centerline Trap Limit: 100% Trap Color Scaling: 100.0% Image to Object Trapping: yes Image to Image Trapping: no Black Width Scaling: 100.0% Black Color Limit: 95.0% Overprint Black Text: 12.0 pt Overprint Black Strokes: no Overprint Black Graphics: no
Texture cremosaUtilizzare per i neonati,
i bebè e i bambini
Utilizzare per i neonati, i bebè e i bambini
30/09/10 13:29:00
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 3.0.91 Copyright 2005 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): ISOcoated.icc RGB Image: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: no Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: All Colors to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: no Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: yes
Prinect Printready Trapper
Page is trapped with Prinect Printready Trapper 5.0.91 Copyright 2005 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document traps, with the free Trap Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Settings: Width: 0.028 mm = 0.080 pt Printorder: Black / Cyan / Magenta / Yellow / Step Limit: 25.0% Common Density Limit: 0.50 Centerline Trap Limit: 100% Trap Color Scaling: 100.0% Image to Object Trapping: yes Image to Image Trapping: no Black Width Scaling: 100.0% Black Color Limit: 95.0% Overprint Black Text: 12.0 pt Overprint Black Strokes: no Overprint Black Graphics: no
Utilizzare quotidianamente per neonati e bambini
Texture auto-schiumante : non cola negli occhi Facile da risciacquare
MGuideConseil2011_ITAL_ok.indd 17-18
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 3.0.91 Copyright 2005 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): ISOcoated.icc RGB Image: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: no Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: All Colors to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: no Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: yes
Prinect Printready Trapper
Page is trapped with Prinect Printready Trapper 5.0.91 Copyright 2005 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document traps, with the free Trap Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Settings: Width: 0.028 mm = 0.080 pt Printorder: Black / Cyan / Magenta / Yellow / Step Limit: 25.0% Common Density Limit: 0.50 Centerline Trap Limit: 100% Trap Color Scaling: 100.0% Image to Object Trapping: yes Image to Image Trapping: no Black Width Scaling: 100.0% Black Color Limit: 95.0% Overprint Black Text: 12.0 pt Overprint Black Strokes: no Overprint Black Graphics: no
Per un momento di complicità con il bebè e il bambinoPer il bagno dei bebè con pelle delicata e secca
30/09/10 13:29:01
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 3.0.91 Copyright 2005 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): ISOcoated.icc RGB Image: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: no Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: All Colors to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: no Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: yes
Prinect Printready Trapper
Page is trapped with Prinect Printready Trapper 5.0.91 Copyright 2005 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document traps, with the free Trap Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Settings: Width: 0.028 mm = 0.080 pt Printorder: Black / Cyan / Magenta / Yellow / Step Limit: 25.0% Common Density Limit: 0.50 Centerline Trap Limit: 100% Trap Color Scaling: 100.0% Image to Object Trapping: yes Image to Image Trapping: no Black Width Scaling: 100.0% Black Color Limit: 95.0% Overprint Black Text: 12.0 pt Overprint Black Strokes: no Overprint Black Graphics: no
Indispensabili negli spostamenti
MGuideConseil2011_ITAL_ok.indd 19-20
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 3.0.91 Copyright 2005 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): ISOcoated.icc RGB Image: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: no Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: All Colors to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: no Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: yes
Prinect Printready Trapper
Page is trapped with Prinect Printready Trapper 5.0.91 Copyright 2005 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document traps, with the free Trap Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Settings: Width: 0.028 mm = 0.080 pt Printorder: Black / Cyan / Magenta / Yellow / Step Limit: 25.0% Common Density Limit: 0.50 Centerline Trap Limit: 100% Trap Color Scaling: 100.0% Image to Object Trapping: yes Image to Image Trapping: no Black Width Scaling: 100.0% Black Color Limit: 95.0% Overprint Black Text: 12.0 pt Overprint Black Strokes: no Overprint Black Graphics: no
Prevenzione quotidiana e trattamento dei primi arrossamenti
30/09/10 13:29:01
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 3.0.91 Copyright 2005 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): ISOcoated.icc RGB Image: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: no Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: All Colors to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: no Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: yes
Prinect Printready Trapper
Page is trapped with Prinect Printready Trapper 5.0.91 Copyright 2005 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document traps, with the free Trap Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Settings: Width: 0.028 mm = 0.080 pt Printorder: Black / Cyan / Magenta / Yellow / Step Limit: 25.0% Common Density Limit: 0.50 Centerline Trap Limit: 100% Trap Color Scaling: 100.0% Image to Object Trapping: yes Image to Image Trapping: no Black Width Scaling: 100.0% Black Color Limit: 95.0% Overprint Black Text: 12.0 pt Overprint Black Strokes: no Overprint Black Graphics: no
MGuideConseil2011_ITAL_ok.indd 21-22
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 3.0.91 Copyright 2005 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): ISOcoated.icc RGB Image: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: no Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: All Colors to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: no Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: yes
Prinect Printready Trapper
Page is trapped with Prinect Printready Trapper 5.0.91 Copyright 2005 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document traps, with the free Trap Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Settings: Width: 0.028 mm = 0.080 pt Printorder: Black / Cyan / Magenta / Yellow / Step Limit: 25.0% Common Density Limit: 0.50 Centerline Trap Limit: 100% Trap Color Scaling: 100.0% Image to Object Trapping: yes Image to Image Trapping: no Black Width Scaling: 100.0% Black Color Limit: 95.0% Overprint Black Text: 12.0 pt Overprint Black Strokes: no Overprint Black Graphics: no
Alle essenze purificanti
Momento di complicità, benefico per lo sviluppo fisico ed emotivo del bebè
Una texture fluida e leggera
Una texture vellutata e ricca
Una texture nuvola
30/09/10 13:29:02
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 3.0.91 Copyright 2005 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): ISOcoated.icc RGB Image: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: no Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: All Colors to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: no Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: yes
Prinect Printready Trapper
Page is trapped with Prinect Printready Trapper 5.0.91 Copyright 2005 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document traps, with the free Trap Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Settings: Width: 0.028 mm = 0.080 pt Printorder: Black / Cyan / Magenta / Yellow / Step Limit: 25.0% Common Density Limit: 0.50 Centerline Trap Limit: 100% Trap Color Scaling: 100.0% Image to Object Trapping: yes Image to Image Trapping: no Black Width Scaling: 100.0% Black Color Limit: 95.0% Overprint Black Text: 12.0 pt Overprint Black Strokes: no Overprint Black Graphics: no
MGuideConseil2011_ITAL_ok.indd 23-24
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 3.0.91 Copyright 2005 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): ISOcoated.icc RGB Image: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: no Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: All Colors to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: no Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: yes
Prinect Printready Trapper
Page is trapped with Prinect Printready Trapper 5.0.91 Copyright 2005 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document traps, with the free Trap Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Settings: Width: 0.028 mm = 0.080 pt Printorder: Black / Cyan / Magenta / Yellow / Step Limit: 25.0% Common Density Limit: 0.50 Centerline Trap Limit: 100% Trap Color Scaling: 100.0% Image to Object Trapping: yes Image to Image Trapping: no Black Width Scaling: 100.0% Black Color Limit: 95.0% Overprint Black Text: 12.0 pt Overprint Black Strokes: no Overprint Black Graphics: no
Una texture ricca e nutriente
Una texture vellutata e delicata
Pratico negli spostamenti per proteggere e nutrire le zone esposte alle aggressioni
esterne (guance, labbra, fronte)
30/09/10 13:29:03
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 3.0.91 Copyright 2005 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): ISOcoated.icc RGB Image: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: no Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: All Colors to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: no Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: yes
Prinect Printready Trapper
Page is trapped with Prinect Printready Trapper 5.0.91 Copyright 2005 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document traps, with the free Trap Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Settings: Width: 0.028 mm = 0.080 pt Printorder: Black / Cyan / Magenta / Yellow / Step Limit: 25.0% Common Density Limit: 0.50 Centerline Trap Limit: 100% Trap Color Scaling: 100.0% Image to Object Trapping: yes Image to Image Trapping: no Black Width Scaling: 100.0% Black Color Limit: 95.0% Overprint Black Text: 12.0 pt Overprint Black Strokes: no Overprint Black Graphics: no
Toilette quotidiana senza risciacquo del viso, del corpo e del sederino
MGuideConseil2011_ITAL_ok.indd 25-26
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 3.0.91 Copyright 2005 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): ISOcoated.icc RGB Image: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: no Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: All Colors to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: no Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: yes
Prinect Printready Trapper
Page is trapped with Prinect Printready Trapper 5.0.91 Copyright 2005 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document traps, with the free Trap Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Settings: Width: 0.028 mm = 0.080 pt Printorder: Black / Cyan / Magenta / Yellow / Step Limit: 25.0% Common Density Limit: 0.50 Centerline Trap Limit: 100% Trap Color Scaling: 100.0% Image to Object Trapping: yes Image to Image Trapping: no Black Width Scaling: 100.0% Black Color Limit: 95.0% Overprint Black Text: 12.0 pt Overprint Black Strokes: no Overprint Black Graphics: no
Igiene quotidiana del viso, del corpo e dei capelli, bagno o doccia Cura quotidiana del viso Cura quotidiana del corpo
30/09/10 13:29:04
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 3.0.91 Copyright 2005 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): ISOcoated.icc RGB Image: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: no Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: All Colors to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: no Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: yes
Prinect Printready Trapper
Page is trapped with Prinect Printready Trapper 5.0.91 Copyright 2005 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document traps, with the free Trap Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Settings: Width: 0.028 mm = 0.080 pt Printorder: Black / Cyan / Magenta / Yellow / Step Limit: 25.0% Common Density Limit: 0.50 Centerline Trap Limit: 100% Trap Color Scaling: 100.0% Image to Object Trapping: yes Image to Image Trapping: no Black Width Scaling: 100.0% Black Color Limit: 95.0% Overprint Black Text: 12.0 pt Overprint Black Strokes: no Overprint Black Graphics: no
Toilette senza risciacquo del viso, del corpo e del sederino. Utilizzo quotidiano e nei periodi di arrossamenti intensi
MGuideConseil2011_ITAL_ok.indd 27-28
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 3.0.91 Copyright 2005 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): ISOcoated.icc RGB Image: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: no Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: All Colors to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: no Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: yes
Prinect Printready Trapper
Page is trapped with Prinect Printready Trapper 5.0.91 Copyright 2005 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document traps, with the free Trap Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Settings: Width: 0.028 mm = 0.080 pt Printorder: Black / Cyan / Magenta / Yellow / Step Limit: 25.0% Common Density Limit: 0.50 Centerline Trap Limit: 100% Trap Color Scaling: 100.0% Image to Object Trapping: yes Image to Image Trapping: no Black Width Scaling: 100.0% Black Color Limit: 95.0% Overprint Black Text: 12.0 pt Overprint Black Strokes: no Overprint Black Graphics: no
Trattamento quotidiano e nei momenti di acutizzazione per il viso e per il corpo
➡
Igiene quotidiana del viso e del corpo durante il bagno. Ideale in caso di rossori intensi
Igiene quotidiana del viso, del corpo e dei capelli, bagno o doccia
30/09/10 13:29:06
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 3.0.91 Copyright 2005 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): ISOcoated.icc RGB Image: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: no Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: All Colors to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: no Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: yes
Prinect Printready Trapper
Page is trapped with Prinect Printready Trapper 5.0.91 Copyright 2005 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document traps, with the free Trap Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Settings: Width: 0.028 mm = 0.080 pt Printorder: Black / Cyan / Magenta / Yellow / Step Limit: 25.0% Common Density Limit: 0.50 Centerline Trap Limit: 100% Trap Color Scaling: 100.0% Image to Object Trapping: yes Image to Image Trapping: no Black Width Scaling: 100.0% Black Color Limit: 95.0% Overprint Black Text: 12.0 pt Overprint Black Strokes: no Overprint Black Graphics: no
Per gli arrossamenti da pannolino moderati o persistenti
Per la crosta lattea del neonato
MGuideConseil2011_ITAL_ok.indd 29-30
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 3.0.91 Copyright 2005 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): ISOcoated.icc RGB Image: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: no Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: All Colors to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: no Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: yes
Prinect Printready Trapper
Page is trapped with Prinect Printready Trapper 5.0.91 Copyright 2005 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document traps, with the free Trap Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Settings: Width: 0.028 mm = 0.080 pt Printorder: Black / Cyan / Magenta / Yellow / Step Limit: 25.0% Common Density Limit: 0.50 Centerline Trap Limit: 100% Trap Color Scaling: 100.0% Image to Object Trapping: yes Image to Image Trapping: no Black Width Scaling: 100.0% Black Color Limit: 95.0% Overprint Black Text: 12.0 pt Overprint Black Strokes: no Overprint Black Graphics: no
Igiene quotidiana delle zone irritate del viso e del corpo, bagno o doccia Trattamento quotidiano delle zone
irritate del viso e del corpo
30/09/10 13:29:07
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 3.0.91 Copyright 2005 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): ISOcoated.icc RGB Image: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: no Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: All Colors to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: no Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: yes
Prinect Printready Trapper
Page is trapped with Prinect Printready Trapper 5.0.91 Copyright 2005 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document traps, with the free Trap Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Settings: Width: 0.028 mm = 0.080 pt Printorder: Black / Cyan / Magenta / Yellow / Step Limit: 25.0% Common Density Limit: 0.50 Centerline Trap Limit: 100% Trap Color Scaling: 100.0% Image to Object Trapping: yes Image to Image Trapping: no Black Width Scaling: 100.0% Black Color Limit: 95.0% Overprint Black Text: 12.0 pt Overprint Black Strokes: no Overprint Black Graphics: no
SPFUVB50+
UVA
MGuideConseil2011_ITAL_ok.indd 31-32
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 3.0.91 Copyright 2005 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): ISOcoated.icc RGB Image: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: no Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: All Colors to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: no Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: yes
Prinect Printready Trapper
Page is trapped with Prinect Printready Trapper 5.0.91 Copyright 2005 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document traps, with the free Trap Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Settings: Width: 0.028 mm = 0.080 pt Printorder: Black / Cyan / Magenta / Yellow / Step Limit: 25.0% Common Density Limit: 0.50 Centerline Trap Limit: 100% Trap Color Scaling: 100.0% Image to Object Trapping: yes Image to Image Trapping: no Black Width Scaling: 100.0% Black Color Limit: 95.0% Overprint Black Text: 12.0 pt Overprint Black Strokes: no Overprint Black Graphics: no
30/09/10 13:29:08
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 3.0.91 Copyright 2005 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): ISOcoated.icc RGB Image: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: no Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: All Colors to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: no Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: yes
Prinect Printready Trapper
Page is trapped with Prinect Printready Trapper 5.0.91 Copyright 2005 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document traps, with the free Trap Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Settings: Width: 0.028 mm = 0.080 pt Printorder: Black / Cyan / Magenta / Yellow / Step Limit: 25.0% Common Density Limit: 0.50 Centerline Trap Limit: 100% Trap Color Scaling: 100.0% Image to Object Trapping: yes Image to Image Trapping: no Black Width Scaling: 100.0% Black Color Limit: 95.0% Overprint Black Text: 12.0 pt Overprint Black Strokes: no Overprint Black Graphics: no
Chiedi consiglio al tuo farmacista.Il catalogo prodotti Mustela® può variare in funzione dei paesi, vi chiediamo gentilmente
di rivolgervi al vostro punto vendita per conoscere le referenze disponibili.Per ulteriori informazioni, vieni a visitarci sul sito
Venduti esclusivamente in farmacia e nei migliori negozi specializzati.
MGuideConseil2011_ITAL_ok.indd 1-2
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 3.0.91 Copyright 2005 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): ISOcoated.icc RGB Image: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: no Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: All Colors to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: no Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: yes
Prinect Printready Trapper
Page is trapped with Prinect Printready Trapper 5.0.91 Copyright 2005 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document traps, with the free Trap Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Settings: Width: 0.028 mm = 0.080 pt Printorder: Black / Cyan / Magenta / Yellow / Step Limit: 25.0% Common Density Limit: 0.50 Centerline Trap Limit: 100% Trap Color Scaling: 100.0% Image to Object Trapping: yes Image to Image Trapping: no Black Width Scaling: 100.0% Black Color Limit: 95.0% Overprint Black Text: 12.0 pt Overprint Black Strokes: no Overprint Black Graphics: no