When Inspection Needs Perfection

K15-C

CATALOGO K15C-2014_Layout 1 16/04/14 11:39 Pagina 1

conc

ept:

over

-prin

t.it

BREVETTI C.E.A. SpA

Via del Commercio, 28 - 36050 Sovizzo (VI) ItalyTel. +39 0444.551.988 - Fax +39 0444.536.241www.brevetti-cea.com - info@brevetti-cea.com

Rev

. 0 ·

04/2

014

Specification subject to change without notice.All rights reserved. The copying of technical data and images is forbidden. © Copyright BREVETTI C.E.A. SpA

K15-C200 K15-C400Inspected containers: Syringes Syringes

Products to be inspected Waterlike, Suspensions Waterlike, Suspensions

Container size:Body: from 6.85mm to 14.45mm

Flange: max 24mmHeight: 120mm

Body: from 6.85mm to 14.45mmFlange: max 24mm

Height: 120mm

Machine nominal speed: up to 200 pcs/min(12.000 pcs/h)

up to 400 pcs/min(24.000 pcs/h)

Container inspected: 1 at the same time 2 at the same time

Spindle Rotation 24 brushless servo-motors 24 brushless servo-motors

Rotation speed: Continuous regulationUp to 4500 rpm

Continuous regulationUp to 4500 rpm

Leak Detection Units 1 unit in turret 1 unit in turret

Min Product Conductivity 1,5 μS/cm 1,5 μS/cm

Loading: In line. 1 channel In line. 1 channel

Unloading Accepted: In line In line

Unloading Rejected: By trays By trays

Electric supply: 400V ±10%-50/60 Hz-3Ph+N+PE 400V ±10%-50/60 Hz-3Ph+N+PE

Power: 8kW 8kW

Compressed air: 6bar, 200 Nl/min 6bar, 200 Nl/min

Dimensions (WxDxH): 2300x2270x1950 2300x2270x1950

Weight: 2300 kg 2300 kg

Loading height: 1190 mm ± 25 mm 1190 mm ± 25 mm

Unloading height: 925 mm ± 25 mm 925 mm ± 25 mm

Noise: < 75 dB(A) < 75 dB(A)

K15-C200 - K15-C400

Particles, fill level and cosmetic inspection

RPV Remote Parameterization & Validation

“Fail safe” reject verification system (Optional)

21 CFR part 11 compliance for electronic records (recipes, batches/sub-batches, audit trail)

Ethernet connection

User friendly interface

In-line connection to upstream and downstream equipments.

Leak Detection available for liquid products (High Voltage)

Needle shield inspection with High Voltage

Product colour (Spectrometer)

Product opacity (Opacimeter)

OCR/OCV

K15-C is the machine dedicated to the inspection of pre-filled syringes designed to be inserteddownstream from filling and sterilizing lines and upstream from labelling and packaging systems.

Based on a new lean handling system, easy to clean and to maintain, the machine is available indifferent configurations, covering a productivity from 200 to 400 pieces per minute and a syringediameter from 6,85 mm to 14,45 mm

A complete set of visual inspections available for particles and cosmetic defect, combined withthe application of the latest technologies such as High Voltage, make the K15-C a comprehensivesyringes inspection solution.

The information given on this data sheet is accurate as for the date of issue. Nothing here in shall bedeemed to constitute a warranty, explicitly or implicitly. It is the user’s responsibility to determine theapplicability and suitability of such material to any particular purpose.

CATALOGO K15C-2014_Layout 1 16/04/14 11:39 Pagina 2