Catalogo Eminence 2011
-
Upload
rodriguezfrbs -
Category
Documents
-
view
287 -
download
6
Transcript of Catalogo Eminence 2011
2 011pro audio • hf devicescomponents • guitar • bass
There’s no doubt the guitar speaker is one of the most important pieces of the tone puzzle. With no practical way to demo them in a retail environment, it has always been a challenge for retailers to sell replacement or upgrade speakers. Until NOW, that is.
The Eminence Tone Center, consisting of a 4x12 cabinet loaded with four uniquely voiced guitar speakers and a foot switch, finally offers the consumer the ability to play through a selection of speakers by plugging in any amplifier of their choice. With full color graphics and product information cards for each model, this retail display makes a consumer’s purchase decision easy. Learn more at www.eminence.com.
it’s never been easier to
We are proud of our long history of manufacturing loudspeakers here in Eminence, Kentucky.
Each product is made by hand with quality, value and service in mind. We know that real
performance and tone only come from pride, passion and attention to detail. We all thank you
for helping to keep us doing what we love, and for keeping the American dream alive!
guitarexclusive fdm technology . . . . . . . 33acoustic series . . . . . . . . . . . . . . . . . . 34 legend series . . . . . . . . . . . . . . . . . . . . 35Patriot series . . . . . . . . . . . . . . . . . . . . 37redcoat series . . . . . . . . . . . . . . . . . . . 42Bass guitar . . . . . . . . . . . . . . . . . . . . . . 46
referenceguitar sPeaKer tone guide . . . . . . . . 50loudsPeaKer data exPlained . . . . . . 52designing enclosures . . . . . . . . . . . . 54
pro audioProfessional series . . . . . . . . . . . . . . 4neodymium series . . . . . . . . . . . . . . . . 12american standard . . . . . . . . . . . . . . 18hf drivers . . . . . . . . . . . . . . . . . . . . . . . 28suPertWeeters . . . . . . . . . . . . . . . . . . . 29horn flares . . . . . . . . . . . . . . . . . . . . . 29crossovers . . . . . . . . . . . . . . . . . . . . . 31
thank you for considering eminence products!
For a complete list of Eminence distributors and to access our US dealer finder, please visit http://www.eminence.com
footnotes
* Please consult www.eminence.com for sPecifications of models with alternative imPedances.
** multiPle units exceed Published rating evaluated under eia 426a noise source and test standard while in a free-air, nontemPera-ture-controlled environment.
*** the average outPut across the usable frequency range when aPPlying 1w/1m into the nominal imPedance. ie: 2.83 v/8 ohms, 4 v/16 ohms. eminence resPonse curves are measured under the following conditions: all sPeakers are tested at 1w/1m using a variety of test set-uPs for the aPProPriate imPedance | lms using 0.25" suPPlied microPhone (software calibrated) mounted 1m from wall/baffle | 2 ft. x 2 ft. baffle is built into the wall with the sPeaker mounted flush against a steel ring for minimum diffraction | hafler P1500 trans-nova amPlifier | 2700 cu. ft. chamber with fiberglass on all six surfaces (three with custom-made wedges).
**** beta 8cx, 10cx, 12cx and acoustinator™ cx2008 are coaxial sPeakers with tweeter sold seParately. Published usable frequency resPonse contingent uPon use of aPt 50 hf driver.
***** multiPle units exceeded Published rating evaluated under aes500 and aes800 noise sources and test standards while mounted on eminence’s ti-2000 horn in a nontemPerature-controlled environment.
****** the average on axis outPut across the entire usable frequency range when aPPlying 1w/1m into the nominal imPedance while mounted on the h2ea horn measured with: lms (software calibrated) using a 0.25" [6.4mm] suPPlied microPhone mounted 1m from horn mouth, hafler P1500 trans-nova amPlifier, 2700 cu. ft. chamber w/fiberglass on all six surfaces (three with custom made wedges). Plane-wave tube resPonse and imPedance curves measured with lms on a 0.75" [19.1mm] diameter tube with adaPter to allow for smooth transition to throat diameter and 1w/1m into nominal imPedance. Prices and sPecifications subject to change without notice.
We are a full line stocking distributor of Eminence components since 1978.Same day shipping—call us for a quote today! 800-321-6306
martinsoundpro.com
Professional seriesif you’ve heard live audio, you’ve heard the eminence Professional series loudspeakers. From the pump-it-up sounds of a sports arena, to the latest hits played live by the greatest artists, even the Star-Bangled Banner proudly booming onto the deck of an aircraft carrier. You’ll hear them in the local VFW Hall and Moose Lodge. And being reverend or rockin’ in places of worship. No wonder that for over 40 years, Eminence Professional series loudspeakers have been the brand of choice in audio systems throughout the world.
There are 26 unique models in our Professional series so it’s easy to find yours. From heavy-duty subwoofers, low distortion woofers, and super high-power woofers to lightweight neodymium transducers in truncated frames for line arrays. Each is designed with your specific needs in mind. Every speaker comes standard with Made in the USA pride, and is backed by a Seven Year Warranty against manufacturer’s defects*. There are over 1,200 USA dealers and distributors worldwide. Visit www.eminence.com to find a dealer near you.
*Warranty policy may vary outside of the continental United States and Canada. Check with your local distributor for warranty details.
no other name in loudspeakers has been so widely depended upon for performance and reliability.
The signature of each Eminence Professional model is its cast aluminum Eminence chassis. Lightweight and strong, aluminum keeps the magnetic field inside the gap. That means the motor strength is higher and the stray magnetic field lower. We coat the chassis and all metal parts with an epoxy-acrylic finish. Our in-house e-coat process lets us control the thickness of that coating to within 0.001”. That’s the diameter of a human hair and it’s critical when working with close tolerance transducer motor designs. We then add front and rear sealing gaskets on each model to allow front or rear loading.
5
ref
lex
Bo
x
sc
oo
P l
oa
din
g
ho
rn
lo
ad
ing
su
BW
oo
fer
us
ag
e
Wo
ofe
r u
sa
ge
mid
Ba
ss
us
ag
e
mid
ra
ng
e u
sa
ge
clo
sed
Bo
x
comPatiBilitydELTA PrO 8A j j j j j
dELTA PrO 8B j j j j j
KAPPA PrO 10A j j j j
dEFiNiMAx 4012HO j j j j j j j
dELTA PrO 12A j j j j j j
KAPPA PrO 12A j j j j j
LAB 12 j j j j
dEFiNiMAx 4015LF j j j j j j
dELTA PrO 15A j j j j j
KAPPA PrO 15A j j j j
KAPPA PrO 15LF j j j j j
KiLOMAx PrO 15A j j j j j
LAB 15 j j j j
OMEgA PrO 15A j j j j j
dEFiNiMAx 4018LF j j j j j
dELTA PrO18A j j j j j
dELTA PrO18C j j j j j
KiLOMAx PrO 18A j j j j
OMEgA PrO 18A j j j j j
OMEgA PrO 18C j j j j j
SigMA PrO 18A j j j j j
nominal Basket diameter
nominal impedance*
Power rating**
Watts
music Program
resonance
usable frequency range
sensitivity***
magnet Weight
gap height
voice coil diameter
resonant frequency (fs)
dc resistance (re)
coil inductance (le)
mechanical Q (Qms)
electromagnetic Q (Qes)
total Q (Qts)
compliance equivalent volume (vas)
Peak diaphragm displacement volume (vd)
mechanical compliance of suspension (cms)
Bl Product (Bl)
diaphragm mass inc. airload (mms)
efficiency Bandwidth Product (eBP)
maximum linear excursion (xmax)
surface area of cone (sd)
maximum mechanical limit (xlim)
recommended enclosure volume
sealed
vented
driver volume displaced
overall diameter
Baffle hole diameter
front sealing gasket
rear sealing gasket
mounting holes diameter
mounting holes B.c.d.
depth
net Weight
shipping Weight
coil construction
coil former
magnet composition
core details
Basket materials
cone composition
cone edge composition
dust cap composition
sPecification
thiele & small Parameters
mounting information
materials of construction
6
Professional series
* Please see footnotes on Page 3 for information regarding nominal imPedance, Power rating and sensitivity.
delta Pro-8a KaPPa Pro-10a definimax™ 4012ho
8’’, 203mm
8 or 16 ohms
225W
450W
69hz
100hz-3khz
97.8
59 oz.
0.310’’, 7.95mm
2’’, 50.8mm
69hz
5.4
0.82mh
6.43
0.20
0.22
18.32 liters / .65 cu.ft.
66cc
0.35mm/n
14.1 t-m
19 grams
307
3.0mm
218.2 cm2
8.0mm
8-16 liters / .30-.60 cu.ft.
10-16 liters/.40-.60 cu.ft.
63.7 cu.in / 1.04 liters
8.02’’, 203.71mm
7.36’’, 186.9mm
fitted as standard
fitted as standard
0.28’’, 7.1mm
8.60’’, 218.4mm
3.75’’, 95mm
10.0 lbs, 4.5 kg
11 lbs, 4.9 kg
copper voice coil
Polyimide former
ferrite magnet
vented and extended core
die-cast aluminum basket
Paper cone
cloth cone edge
solid composition paper dust cap
10”, 254mm
8 ohms
500W
1000W
46hz
102hz-2khz
97
80 oz.
0.375”, 9.53mm
3”, 76.2mm
46hz
6.50
1.15mh
10.10
0.20
0.20
52.2 liters / 1.8 cu.ft.
110cc
0.31mm/n
18.8 t-m
38 grams
230
3.2mm
344.9 cm2
10.9mm
7-9.9 liters/0.25-0.35 cu.ft.
12-28 liters/0.43-1 cu.ft.
104.8 cu.in / 1.72 liters
10.25”, 260.4mm
9.13”, 231.8mm
fitted as standard
fitted as standard
0.28”, 7.1mm
9.63”, 244.5mm
4.33”, 110mm
15.3 lbs., 6.9 kg
16.4 lbs., 7.4 kg
copper voice coil
Polyimide former
ferrite magnet
vented core
die-cast aluminum basket
Paper cone
cloth cone edge
solid composition paper dust cap
12”, 304.8mm
8 ohms
600W
1200W
46hz
49hz-2.5khz
94
109 oz.
0.375”, 9.53mm
4”, 101.6mm
46hz
5.85
1.17mh
5.74
0.38
0.35
59.4 liters / 2.1 cu.ft.
342cc
0.14mm/n
19.6 t-m
86 grams
121
6.2mm
552.0 cm2
11.2mm
26-31 liters/ 0.9-1.1 cu.ft.
36-79 liters/ 1.3-2.8 cu.ft.
179.3 cu.in / 2.94 liters
12.38”, 314.3mm
11.06”, 281mm
fitted as standard
fitted as standard
0.28”, 7.1mm
11.59”, 294.3mm
5.32”, 135mm
22.5 lbs., 10.2 kg
29 lbs., 13.1 kg
copper voice coil
Polyimide former
ferrite magnet
undercut with copper shorting ring and
core Periphery ventilation
die-cast aluminum basket
Paper cone
cloth cone edge
Pop-on dust cap
definimax™ 4012hodelta Pro-8a KaPPa Pro-10a
7WWW.eminence.com * Please see footnotes on Page 3 for information regarding nominal imPedance, Power rating and sensitivity.
delta Pro-12a laB12KaPPa Pro-12a
12”, 304.8mm
8 ohms
400W
800W
51hz
52hz-4.5khz
99.2
80 oz.
0.375”, 9.53mm
2.5”, 63.5mm
51hz
5.71
0.84mh
7.56
0.37
0.35
81.7 liters / 2.9 cu.ft.
242cc
0.21mm/n
15.3 t-m
48 grams
138
4.6mm
532.4 cm2
13.7mm
28-35 liters/1-1.25 cu.ft.
31-91 liters/1.1-3.2 cu.ft.
155.5 cu.in / 2.55 liters
12.38”, 314.5mm
11.07”, 281mm
fitted as standard
fitted as standard
0.27”, 6.9mm
11.57”, 293.8mm
6.22”, 158mm
16.3 lbs., 7.4 kg
18 lbs., 8.2 kg
aluminum voice coil
Polyimide former
ferrite magnet
vented and extended core
die-cast aluminum basket
Paper cone
cloth cone edge
solid composition paper dust cap
12”, 304.8mm
8 ohms
500W
1000W
37hz
57hz-2.8khz
97.1
80 oz.
0.375”, 9.53mm
3”, 76.2mm
37hz
5.46
1.22mh
6.93
0.25
0.24
121.0 liters / 4.3 cu.ft.
249cc
0.32mm/n
17.3 t-m
59 grams
148
4.8mm
519.5 cm2
14.8mm
n/a
17-34 liters/0.6-1.2 cu.ft.
155.5 cu.in / 2.55 liters
12.38”, 314.5mm
11.07”, 281.1mm
fitted as standard
fitted as standard
0.26”, 6.5mm
11.57”, 293.8mm
6.22”, 158mm
16.6 lbs., 7.5 kg
18.4 lbs., 8.4 kg
copper voice coil
Polyimide former
ferrite magnet
vented core
die-cast aluminum basket
Paper cone
cloth cone edge
solid composition paper dust cap
12”, 304.8mm
6 ohms
400W
800W
22hz
25hz-125hz
89.2
160 oz.
0.375”, 9.53mm
2.5”, 63.5mm
22hz
4.29
1.48mh
13.32
0.39
0.38
125.2 liters / 4.4 cu.ft.
659cc
0.35mm/n
15.0 t-m
146 grams
56
13.0mm
506.7 cm2
22mm
22.7-28.3 liters/ 0.8-1 cu.ft.
45.3-101.9 liters/1.6-3.6 cu.ft.
188.6 cu.in / 3.09 liters
12.32”, 312.8mm
10.98”, 278.9mm
fitted as standard
fitted as standard
0.26”, 6.6mm
11.77”, 299mm
6.44”, 164mm
22 lbs., 10 kg
23.8 lbs., 10.8 kg
copper voice coil
Polyimide former
double stacked 80 oz. ferrite magnets
vented and extended core
12-spoke die-cast aluminum basket
Kevlar-reinforced paper cone
foam cone edge
dual inverted dust caps
delta Pro-12a KaPPa Pro-12a laB12
nominal Basket diameter
nominal impedance*
Power rating**
Watts
music Program
resonance
usable frequency range
sensitivity***
magnet Weight
gap height
voice coil diameter
resonant frequency (fs)
dc resistance (re)
coil inductance (le)
mechanical Q (Qms)
electromagnetic Q (Qes)
total Q (Qts)
compliance equivalent volume (vas)
Peak diaphragm displacement volume (vd)
mechanical compliance of suspension (cms)
Bl Product (Bl)
diaphragm mass inc. airload (mms)
efficiency Bandwidth Product (eBP)
maximum linear excursion (xmax)
surface area of cone (sd)
maximum mechanical limit (xlim)
recommended enclosure volume
sealed
vented
driver volume displaced
overall diameter
Baffle hole diameter
front sealing gasket
rear sealing gasket
mounting holes diameter
mounting holes B.c.d.
depth
net Weight
shipping Weight
coil construction
coil former
magnet composition
core details
Basket materials
cone composition
cone edge composition
dust cap composition
sPecification
thiele & small Parameters
mounting information
materials of construction
8
Professional series
* Please see footnotes on Page 3 for information regarding nominal imPedance, Power rating and sensitivity.
delta Pro-15a KaPPa Pro-15adefinimax™ 4015lf
15”, 381mm
8 ohms
700W
1400W
42hz
35hz-1.2khz
96
109 oz.
0.375”, 9.53mm
4”, 101.6mm
42hz
5.04
1.49mh
6.73
0.54
0.5
115.5 liters / 4.1 cu.ft.
786cc
0.11mm/n
18.4 t-m
139 grams
77
9.0mm
872.9 cm2
15.5mm
48-57 liters/ 1.7-2.0 cu.ft.
82-181 liters/ 2.9-6.4 cu.ft.
262.8 cu.in / 4.31 liters
15.21”, 386.3mm
14.0”, 355.6mm
fitted as standard
fitted as standard
0.28”, 7.1mm
14.56”, 369.8mm
6.56”, 166.7mm
23.7 lbs., 10.8 kg
26 lbs., 11.8 kg
copper voice coil
Polyimide former
ferrite magnet
undercut with copper shorting ring and
core Periphery ventilation
die-cast aluminum basket
acrylic Wetlook Paper cone
cloth cone edge
acrylic wetlook paper dust cap
15”, 381mm
8 ohms
400W
800W
42hz
54hz-4.2khz
101.6
80 oz.
0.375”, 9.53mm
2.5”, 63.5mm
42hz
5.71
0.83mh
4.73
0.44
0.40
243.5 liters / 8.6 cu.ft.
368cc
0.24mm/n
14.5 t-m
61 grams
95
4.3mm
856.3 cm2
13.7mm
28-42.5 liters/1-1.5 cu.ft.
57-133 liters/2-4.7 cu.ft.
239 cu.in / 3.92 liters
15.32”, 389mm
14.0”, 356mm
fitted as standard
fitted as standard
0.28”, 7.1mm
14.56”, 369.9mm
6.06”, 154mm
16.6 lbs., 7.5 kg
19.1 lbs., 8.7 kg
aluminum voice coil
Polyimide former
ferrite magnet
vented and extended core
die-cast aluminum basket
Paper cone
cloth cone edge
solid composition paper dust cap
15”, 381mm
8 ohms
500W
1000W
47hz
46hz-4khz
101
80 oz.
0.375”, 9.53mm
3”, 76.2mm
47hz
5.23
1.01mh
8.01
0.40
0.38
167.7 liters / 5.9 cu.ft.
274cc
0.16mm/n
16.6 t-m
72 grams
118
3.2mm
856.3 cm2
13.2mm
n/a
54-184 liters/1.9-6.5 cu.ft.
239 cu.in / 3.92 liters
15.32”, 389.1mm
14.0”, 355.6mm
fitted as standard
fitted as standard
0.28”, 7.1mm
14.56”, 369.9mm
6.06”, 154mm
16.9 lbs., 7.7 kg
19.5 lbs., 8.9 kg
aluminum voice coil
Polyimide former
ferrite magnet
vented core
die-cast aluminum basket
Paper cone
cloth cone edge
solid composition paper dust cap
definimax™ 4015lf delta Pro-15a KaPPa Pro-15a
9WWW.eminence.com * Please see footnotes on Page 3 for information regarding nominal imPedance, Power rating and sensitivity.
laB15KaPPa Pro-15lf-2 Kilomax® Pro 15a
15”, 381mm
8 ohms
600W
1200W
35hz
38hz-1.8khz
97.8
120 oz.
0.375”, 9.53mm
3”, 76.2mm
35hz
6.5
1.40mh
7.3
0.32
.30
198.8 liters / 7.0 cu.ft.
507cc
0.20mm/n
21.6 t-m
102 grams
112
6.7mm
856.3cm2
18.0mm
n/a
76.5-164 liters/2.7-5.8 cu.ft.
262.8 cu.in / 4.31 liters
15.21”, 386.4mm
14.0”, 355.5mm
fitted as standard
fitted as standard
0.28”, 7.1mm
14.56”, 369.9mm
6.57”, 167mm
22.3 lbs., 10.1 kg
24.8lbs., 11.3 kg
copper voice coil
Polyimide former
ferrite magnet
vented and extended core
die-cast aluminum basket
Paper cone
cloth cone edge
solid composition paper dust cap
15”, 381mm
8 ohms
1250W
2500W
41hz
44hz-800hz
95.5
109 oz.
0.375”, 9.53mm
4”, 101.6mm
41hz
4.97
1.78mh
8.80
0.40
0.39
154.5 liters / 5.5 cu.ft.
677cc
0.15mm/n
17.7 t-m
98 grams
103
7.9mm
856.3 cm2
13.5mm
n/a
82-176 liters/2.9-6.2 cu.ft.
262.8 cu.in / 4.31 liters
15.21”, 386.3mm
14.0”, 355.6mm
fitted as standard
fitted as standard
0.28”, 7.1mm
14.56”, 369.8mm
6.42”, 163mm
24.7 lbs., 11.2 kg
27.1 lbs., 12.3 kg
copper voice coil
Polyimide former
ferrite magnet
extended core with core Periphery ventilation
die-cast aluminum basket
Paper cone
cloth cone edge
Porous cloth top spider/ heatsink
15”, 381.0mm
6 ohms
600W
1200W
28hz
20hz-125hz
88.5
160 oz.
0.375”, 9.53mm
3.0”, 76.2mm
28hz
4.9
3.23mh
5.36
.37
.35
103.61 liters / 3.7 cu.ft.
968cc
0.11mm/n
26.7 t-m
308 grams
75
11.8mm
823.7 cm2
22mm
35-108 liters/1.2-3.8 cu.ft.
71-290 liters/2.5-10.3 cu.ft.
272.1 cu.in / 4.46 liters
15.34”, 389.6mm
14.00”, 355.5mm
fitted as standard
n/a
0.26”, 6.6mm
14.70”, 373.5mm
7.75”, 197mm
23.8 lbs., 10.80 kg
26 lbs, 11.8 kg
copper voice coil
al former
double stacked 80 oz. ferrite magnets
vented and extended core
die-cast aluminum basket
Kevlar-reinforced paper cone
foam cone edge
acrylic wetlook solid composition paper dust cap
KaPPa Pro-15lf-2 Kilomax® Pro 15a laB15
nominal Basket diameter
nominal impedance*
Power rating**
Watts
music Program
resonance
usable frequency range
sensitivity***
magnet Weight
gap height
voice coil diameter
resonant frequency (fs)
dc resistance (re)
coil inductance (le)
mechanical Q (Qms)
electromagnetic Q (Qes)
total Q (Qts)
compliance equivalent volume (vas)
Peak diaphragm displacement volume (vd)
mechanical compliance of suspension (cms)
Bl Product (Bl)
diaphragm mass inc. airload (mms)
efficiency Bandwidth Product (eBP)
maximum linear excursion (xmax)
surface area of cone (sd)
maximum mechanical limit (xlim)
recommended enclosure volume
sealed
vented
driver volume displaced
overall diameter
Baffle hole diameter
front sealing gasket
rear sealing gasket
mounting holes diameter
mounting holes B.c.d.
depth
net Weight
shipping Weight
coil construction
coil former
magnet composition
core details
Basket materials
cone composition
cone edge composition
dust cap composition
sPecification
thiele & small Parameters
mounting information
materials of construction
10
Professional series
* Please see footnotes on Page 3 for information regarding nominal imPedance, Power rating and sensitivity.
delta Pro-18adefinimax™ 4018lfomega Pro-15a
omega Pro-15a15”, 381mm
8 ohms
800W
1600W
33hz
51hz-1.7khz
97.3
109 oz.
0.375”, 9.53mm
4”, 101.6mm
33hz
5.28
1.04mh
5.69
0.33
0.32
258.5 liters / 9.1 cu.ft.
411cc
0.25mm/n
17.5 t-m
94 grams
99
4.8mm
856.3 cm2
12.2mm
n/a
57-108 liters/ 2-3.8 cu.ft.
262.8 cu.in / 4.31 liters
15.21”, 386.4mm
14.0”, 355.6mm
fitted as standard
fitted as standard
0.28”, 7.1mm
14.56”, 369.9mm
6.35”, 161mm
22.7 lbs., 10.3 kg
25.2 lbs., 11.4 kg
copper voice coil
Polyimide former
ferrite magnet
vented and extended core
die-cast aluminum basket
Paper cone
cloth cone edge
solid composition paper dust cap
18”, 457.2mm
8 ohms
800W
1600W
32hz
36hz-200hz
95
109 oz.
0.375”, 9.53mm
4”, 101.6mm
32hz
6.19
4.78mh
10.38
0.36
0.35
237.9 liters / 8.4 cu.ft.
939cc
0.12mm/n
27.0 t-m
211 grams
89
7.9mm
1188.0 cm2
15.9mm
n/a
125-210 liters/ 4.4-7.4 cu.ft.
403.9 cu.in / 6.62 liters
18”, 457.2mm
16.57”, 420.9mm
fitted as standard
fitted as standard
0.28”, 7.1mm
17.25”, 438.2mm
8.13”, 206.4mm
24 lbs, 10.9 kg
26 lbs, 11.8 kg
copper voice coil
Polyimide former
ferrite magnet
undercut with copper shorting ring
and core Periphery ventilation
die-cast aluminum basket
acrylic Wetlook Paper cone
cloth cone edge
acrylic wetlook paper dust cap
18’’, 457mm
8 or 4 ohms
500W
1000W
28hz
37hz-250hz
96
67 oz.
0.380’’, 9.53mm
2.5’’, 63.5mm
28hz
5.3
3.43mh
10.38
0.33
0.32
493.2 liters / 17.41cu.ft.
796cc
0.25mm/n
18.9 t-m
128 grams
84
6.7mm
1188.0 cm2
15.0mm
n/a
85-297 liters/3.0-10.5 cu.ft.
367 cu.in / 6.01 liters
18.00’’, 457.2mm
16.57’’, 420.9mm
fitted as standard
fitted as standard
0.28’’, 7.1mm
17.25’’, 438.2mm
8.13’’, 207mm
17.0 lbs, 7.7 kg
20.5 lbs, 9.3 kg
copper voice coil
Polyimide former
ferrite magnet
vented and extended core
die-cast aluminum basket
Paper cone
cloth cone edge
solid composition paper dust cap
definimax™ 4018lf delta Pro-18a
11WWW.eminence.com * Please see footnotes on Page 3 for information regarding nominal imPedance, Power rating and sensitivity.
sigma Pro 18a-2omega Pro-18aKilomax® Pro 18a
18”, 457.2mm
8 ohms
1250W
2500W
32hz
33hz-300hz
95.8
109 oz.
0.375”, 9.53mm
4”, 101.6mm
32hz
5.07
1.59mh
10.15
.49
0.47
331.5 liters / 11.7 cu.ft.
1159cc
0.18mm/n
17.2 t-m
143.17 grams
64.9
10.0mm
1159.0 cm2
19.2mm
104.8-172.7 liters/3.7-6.1cu.ft.
118.9-303 liters/4.2-10.7cu.ft.
403.9 cu.in / 6.62 liters
18”, 457.2mm
16.56”, 420.6mm
fitted as standard
fitted as standard
0.28”, 7.1mm
17.25”, 438.2mm
8.15”, 207mm
27.4 lbs., 12.4 kg
30.9 lbs., 14 kg
copper voice coil
Kapton
ferrite magnet
extended core with core Periphery
ventilation
die-cast aluminum basket
treated Paper-Kevlar
cloth cone edge
Porous cloth top spider/ heatsink
18”, 457.2mm
8 or 4 ohms
800W
1600W
25hz
40hz-800hz
97
109 oz.
0.375”, 9.53mm
4”, 101.6mm
25hz
5.20
1.67mh
8.18
0.32
0.31
548.7 liters / 19.4 cu.ft.
556cc
0.29mm/n
18.8 t-m
138 grams
79
4.8mm
1159.0 cm2
16.0mm
n/a
96-198 liters/ 3.4-7 cu.ft.
403.9 cu.in / 6.62 liters
18”, 457.2mm
16.56”, 420.5mm
fitted as standard
fitted as standard
0.28”, 7.1mm
17.25”, 438.2mm
8.15”, 207mm
25.2 lbs., 11.4 kg
28.9 lbs., 13.1 kg
copper voice coil
Polyimide former
ferrite magnet
vented and extended core
die-cast aluminum basket
Paper cone
cloth cone edge
solid composition paper dust cap
18”, 457.2mm
8 ohms
650W
1300W
28hz
41hz-2.4khz
99
120 oz.
0.375”, 9.53mm
3”, 76.2mm
28hz
6.29
1.90mh
8.28
0.30
0.29
441.2 liters / 15.6 cu.ft.
695cc
0.24mm/n
22.1 t-m
130 grams
93
6.1mm
1140.0 cm2
18.0mm
n/a
93-212 liters/3.3-7.5 cu.ft.
403.9 cu.in / 6.62 liters
18”, 457.2mm
16.56”, 420.5mm
fitted as standard
fitted as standard
0.28”, 7.1mm
17.25”, 438.2mm
8.15”, 207mm
24.5 lbs., 11.1 kg
28.1 lbs., 12.8 kg
copper voice coil
Polyimide former
ferrite magnet
vented and extended core
die-cast aluminum basket
Paper cone
cloth cone edge
solid composition paper dust cap
Kilomax® Pro 18a omega Pro-18a sigma Pro 18a-2
12
neodymium seriesthe basic design of the loudspeaker hasn’t changed much in the past 50 years. on the contrary, many materials incorporated in loudspeaker design have improved dramatically.
Back in the 50s and 60s, Alnico was the most common magnet used in loudspeakers. However, a shortage in materials and increased costs for Alnico during that time precipitated a shift to the widespread use of the ceramic magnets most of us are familiar with today.
Just before the turn of this century, speaker manufacturers started seriously evaluating the potential benefits of using neodymium magnets in loudspeakers. Although neodymium magnets were expensive, they allowed loudspeaker motors to be as little as half the weight of comparable ceramic magnet motors. Prices of neodymium started coming down and interest in lighter weight speakers grew, as did neodymium speaker options. There are 8 unique models available in our Neodymium Professional series. Each was designed with a specific application in mind. From heavy-duty subwoofers, midranges, and transducers in truncated frames for line arrays, there is an Eminence Neodymium Professional model for your application. Each product includes Made in the USA pride, along with a Seven Year Warranty against manufacturer’s defects*. With over 1,200 USA dealers and distributors worldwide, you can easily find them in a store near you.
*Warranty policy may vary outside of the continental United States and Canada. Check with your local distributor for warranty details.
eminence is the industry leader in neodymium loudspeaker design.
The Eminence LA, deltalite and Kappalite models represent very lightweight, high performance loudspeakers without compromises in power handling, performance or reliability.
13
ref
lex
Bo
x
ho
rn
lo
ad
ing
su
BW
oo
fer
us
ag
e
Wo
ofe
r u
sa
ge
mid
Ba
ss
us
ag
e
mid
ra
ng
e u
sa
ge
clo
sed
Bo
x
comPatiBilityALPHALiTE 6A j j j j j j
ALPHALiTE 6 CBMr j j
LA8 CNMBA j j j j j j
dELTALiTE ii 2510 j j j j j
dELTALiTE ii 2512 j j j j j
KAPPALiTE 3012HO j j j j j j
KAPPALiTE 3012LF j j j j j
dELTALiTE ii 2515 j j j j
KAPPALiTE 3015 j j j j
KAPPALiTE 3015LF j j j j
14
neodymium series
nominal Basket diameter
nominal impedance*
Power rating**
Watts
music Program
resonance
usable frequency range
sensitivity***
magnet Weight
gap height
voice coil diameter
resonant frequency (fs)
dc resistance (re)
coil inductance (le)
mechanical Q (Qms)
electromagnetic Q (Qes)
total Q (Qts)
compliance equivalent volume (vas)
Peak diaphragm displacement volume (vd)
mechanical compliance of suspension (cms)
Bl Product (Bl)
diaphragm mass inc. airload (mms)
efficiency Bandwidth Product (eBP)
maximum linear excursion (xmax)
surface area of cone (sd)
maximum mechanical limit (xlim)
recommended enclosure volume
sealed
vented
driver volume displaced
overall diameter
Baffle hole diameter
front sealing gasket
rear sealing gasket
mounting holes diameter
mounting holes B.c.d.
depth
net Weight
shipping Weight
coil construction
coil former
magnet composition
core details
Basket materials
cone composition
cone edge composition
dust cap composition
sPecification
thiele & small Parameters
mounting information
materials of construction
* Please see footnotes on Page 3 for information regarding nominal imPedance, Power rating and sensitivity.
deltalite® ii 2510la8-cnmBaalPhalite™ 6a alPhalite™ 6 cBmr
la8-cnmBaalPhalite™ 6 cBmralPhalite™ 6a6.5”, 165.1mm
8 ohms
100W
200W
125.55hz
74hz-5.5khz
94
3.5 oz.
0.25”, 6.35mm
1.5”, 38.1mm
126hz
7.3
.53mh
6.30
0.61
0.56
4.92 liters / .17 cu.ft.
46 cc
0.21mm/n
8.5 t-m
7.7 grams
204.9
3.5mm
129.9 cm2
4.0mm
2.83-8 liters/.1-8 cu.ft.
3-16 liters/.1-.6 cu.ft.
15.1 cu.in / 0.25 liters
6.59”, 167.39mm
5.69”, 144.53mm
fitted as standard
fitted as standard
0.23”, 5.8mm
6.06”, 153.9mm
2.40”, 61mm
2.2 lbs, 1.00 kg
2.9 lbs, 1.3 kg
round copper voice coil
Kapton
neodymium magnet
vented and extended core
Pressed steel basket
Paper cone
cloth cone edge
treated paper dust cap
6.5”, 165mm
8 ohms
100W
200W
500.52hz
500hz-4.3khz
99.8
4 oz.
0.25”, 6.35mm
1.5”, 38.1mm
501hz
7.4
.49mh
9.09
1.83
1.53
0.27 liters / .01 cu.ft.
1.40 cc
0.01mm/n
9.8 t-m
7.6 grams
273.2
0.1mm
139.7 cm2
1.6mm
n/a
n/a
15.1 cu.in / 0.25 liters
6.59”, 167.39mm
5.69”, 144.53mm
fitted as standard
fitted as standard
0.23”, 5.8mm
6.06”, 153.9mm
2.40”, 61mm
2.3 lbs., 1.04 kg
3.0 lbs, 1.3 kg
copper voice coil
Kapton
neodymium magnet
non-vented core
Pressed steel basket
Paper cone
full Paper cone
treated paper dust cap
8’’, 203mm
8 ohms
225W
450W
82hz
82hz-3.2khz
95.5
7 oz.
0.28’’, 6.99mm
2.5’’, 63.5mm
81hz
5.6
0.62mh
4.66
0.40
0.37
10.95 liters /0.39 cu.ft.
100cc
0.16mm/n
13.0 t-m
24 grams
201
4.5mm
222.4 cm2
8mm
7-17 liters/ 0.2-.6 cu.ft.
10-17 liters/0.4-0.6 cu.ft.
33.5 cu.in / 0.55 liters
8.02’’, 203.7mm
7.36’’, 186.9mm
fitted as standard
fitted as standard
.28’’, 7.11mm
8.60’’, 218mm
3.90’’, 99.06mm
4.77 lbs., 2.2 kg
5.47 lbs., 2.4 kg
edge Wound copper voice coil
Polyimide former
neo magnet
vented core
die-cast aluminum basket
Paper cone
cloth cone edge
solid composition paper dust cap
15WWW.eminence.com * Please see footnotes on Page 3 for information regarding nominal imPedance, Power rating and sensitivity.
deltalite® ii 2512 KaPPalite™ 3012ho KaPPalite™ 3012lf
deltalite® ii 2510 deltalite®-ii 2512 KaPPalite™ 3012ho KaPPalite™ 3012lf10”, 254mm
8 ohms
250W
500W
53hz
60hz-4khz
97.3
7 oz.
0.275”, 7mm
2.5”, 63.5mm
53hz
5.06
0.40mh
5.76
0.45
0.42
52.5 liters / 1.9 cu.ft.
147cc
0.30mm/n
10.6 t-m
31 grams
117
4.2mm
350.1 cm2
8.0mm
12.7-17 liters/0.45-0.6cu.ft.
17-39.6 liters/0.6-1.4cu.ft.
45 cu.in / 0.74 liters
10.25”,260.4mm
9.15”, 232.4mm
fitted as standard
fitted as standard
0.28”, 7.1mm
9.73”, 247.1mm
4.9”, 123.8mm
4.6 lbs., 2.1 kg
5.7 lbs., 2.6 kg
aluminum voice coil
Polyimide former
neodymium magnet
vented core
die-cast aluminum basket/ heatsink
Paper cone
cloth cone edge
solid composition paper dust cap
12”, 304.8mm
8 ohms
250W
500W
37hz
48hz-4khz
99.9
7 oz.
0.275”, 7mm
2.5”, 63.5mm
37hz
5.04
0.46mh
3.13
0.44
0.39
147 liters / 5.2 cu.ft.
255cc
0.38mm/n
11.3 t-m
49 grams
84
4.9mm
519.5 cm2
8.5mm
23-28 liters/0.8-1cu.ft.
33-85 liters/1.2-3cu.ft.
86.4 cu.in / 1.42 liters
12.38”, 314.5mm
11.06”, 280.9mm
fitted as standard
fitted as standard
0.28”, 7.1mm
11.62”, 295.1mm
6.06”, 154mm
5.1 lbs., 2.3 kg
6.8 lbs., 3.1 kg
aluminum voice coil
Polyimide former
neodymium magnet
vented core
die-cast aluminum basket/ heatsink
Paper cone
cloth cone edge
solid composition paper dust cap
12”, 305mm
8 ohms
400W
800W
52hz
51hz-3.5khz
100.5
11 oz.
0.365”, 9.27mm
3”, 76.2mm
51.5hz
5.5
0.57mh
8.39
0.33
0.32
81.10 liters / 2.86 cu.ft.
330cc
0.20mm/n
15.9 t-m
46.9 grams
157.4
6.2mm
532.4 cm2
12.5mm
28-76 liters/1.0-2.7 cu.ft.
41-110 liters/1.5-3.9 cu.ft.
93.6 cu.in / 1.53 liters
12.38”, 314.45mm
11.06”, 280.9mm
fitted as standard
fitted as standard
0.28”, 7.1mm
11.62”, 295.2mm
5.63”, 143mm
7.1 lbs, 3.22 kg
8.7 lbs., 3.95 kg
aluminum voice coil
Kapton
neodymium magnet
vented core
die-cast aluminum basket
treated Paper cone
sealed cloth surround
treated paper dust cap
12”, 305mm
8 ohms
450W
900W
37hz
46hz-2.0khz
95.5
11 oz.
0.365”, 9.27mm
3”, 76.2mm
37.02hz
5.6
0.98mh
6.94
0.34
0.32
106.65 liters / 3.77 cu.ft.
496cc
0.26mm/n
16.7 t-m
72.4 grams
109.7
9.1mm
545.4 cm2
14.5mm
23-59 liters/1.3-3.0 cu.f.t
37-85 liters/1.3-3.0 cu.ft.
95.3 cu.in / 1.56 liters
12.38”, 314.45mm
11.06”, 280.9mm
fitted as standard
fitted as standard
0.28”, 7.1mm
11.62”, 295.2mm
6.00”, 152.4mm
7.6 lbs, 3.45 kg
9.2 lbs., 4.17 kg
copper voice coil
Kapton
neodymium magnet
vented core
die-cast aluminum basket
treated Paper cone
sealed cloth edge
treated paper dust cap
16
neodymium series
nominal Basket diameter
nominal impedance*
Power rating**
Watts
music Program
resonance
usable frequency range
sensitivity***
magnet Weight
gap height
voice coil diameter
resonant frequency (fs)
dc resistance (re)
coil inductance (le)
mechanical Q (Qms)
electromagnetic Q (Qes)
total Q (Qts)
compliance equivalent volume (vas)
Peak diaphragm displacement volume (vd)
mechanical compliance of suspension (cms)
Bl Product (Bl)
diaphragm mass inc. airload (mms)
efficiency Bandwidth Product (eBP)
maximum linear excursion (xmax)
surface area of cone (sd)
maximum mechanical limit (xlim)
recommended enclosure volume
sealed
vented
driver volume displaced
overall diameter
Baffle hole diameter
front sealing gasket
rear sealing gasket
mounting holes diameter
mounting holes B.c.d.
depth
net Weight
shipping Weight
coil construction
coil former
magnet composition
core details
Basket materials
cone composition
cone edge composition
dust cap composition
sPecification
thiele & small Parameters
mounting information
materials of construction
* Please see footnotes on Page 3 for information regarding nominal imPedance, Power rating and sensitivity.
KaPPalite™ 3015 KaPPalite™ 3015lfdeltalite®-ii 2515
KaPPalite™ 3015 KaPPalite™ 3015lfdeltalite®-ii 251515”, 381mm
8 ohms
300W
600W
42hz
54hz-3.7khz
99.2
7 oz.
0.275”, 7mm
2.5”, 63.5mm
42hz
5.29
1.15mh
4.56
0.41
0.38
204 liters / 7.2 cu.ft.
411cc
0.20mm/n
15.7 t-m
72 grams
103
4.8mm
856.3 cm2
9.0mm
42.5-48 liters/1.5-1.7cu.ft.
51-119 liters/1.8-4.2cu.ft.
145.1 cu.in / 2.38 liters
15.32”, 389mm
14.0”, 355.6mm
fitted as standard
fitted as standard
0.28”, 7.1mm
14.56”, 369.9mm
6.81”, 173mm
5.7 lbs., 2.6 kg
7.9 lbs., 3.6 kg
aluminum voice coil
Polyimide former
neodymium magnet
vented core
die-cast aluminum basket/ heatsink
Paper cone
cloth cone edge
solid composition paper dust cap
15”, 381mm
8 ohms
450W
900W
45hz
40hz-4khz
100.8
11 oz.
0.365”, 9.27mm
3”, 76.2mm
45hz
5.27
0.64mh
6.70
0.36
0.34
153 liters / 5.4 cu.ft.
505cc
0.15mm/n
18.6 t-m
84 grams
125
5.9mm
856.0 cm2
11mm
n/a
51-144 liters/1.8-5.1cu.ft.
155.2 cu.in / 2.54 liters
15.32”, 389.1mm
14.0”, 356.4mm
fitted as standard
fitted as standard
0.28”, 7.1mm
14.56”, 369.8mm
6.8”, 173mm
7.9 lbs., 3.6 kg
10.1lbs., 4.6 kg
copper voice coil
Polyimide former
neodymium magnet
vented core
die-cast aluminum basket/ heatsink
Paper cone
cloth cone edge
solid composition paper dust cap
15”, 381mm
8 ohms
450W
900W
44hz
40hz-1.5khz
98.4
11 oz.
0.365”, 9.27mm
3”, 76.2mm
44hz
5.5
0.93mh
8.97
.48
.46
150.9 liters / 5.3 cu.ft.
846cc
0.14mm/n
17.0 t-m
93.4 grams
90
9.6mm
881.1 cm2
17.0mm
n/a
99-195 liters/3.5-6.9 cu.ft.
156.4 cu.in / 2.56 liters
15.32”, 389.1mm
14.03”, 356.4mm
fitted as standard
fitted as standard
0.28”, 7.1mm
14.56”, 369.8mm
7.25”, 184.2mm
8.6 lbs., 3.9 kg
10.7 lbs., 4.9 kg
copper voice coil
Kapton
neodymium magnet
vented core
die-cast aluminum basket/heatsink
treated Paper cone
cloth cone edge
treated paper dust cap
LoudspeakersPlus®
450 S. Spruce St. • Unit G • Manteno, IL 609501.866.963.0733
www.loudspeakersplus.comwww.speakerreconingservice.com
www.thetonechamber.com
Our new exclusive Tone Chamber is the only place where you can try EVERY
Eminence guitar speaker– with YOUR guitar and
YOUR amp.
By using our custom designed switching system, you can
instantly compare all27 Eminence guitar speakers.
You can even demo two different speakers at
once for a “blended” tone.
Pick Your Tone!
Call Today to reserve your time in the Tone Chamber!
®sales • service • diagnostics • installation
THE
CHAMBER
TONE
Conveniently located just south of Chicago on I-57.
• With over 75 years of combined experience, our in-house technical staff is available for application specific consulting
• Factory Authorized Genuine Eminence Warranty and Service
• Our 7500 sq. ft. warehouse is centrally located in North America for fast and economical delivery
• Same Day Shipping and Express Shipping Services available
As a Charter Genuine Eminence Distributor our huge inventory
is ready to ship today
®
18
american standardEach Eminence American Standard model can be identified by its economical Stamped Steel chassis. Although more affordable than cast aluminum, these frames provide an excellent and versatile chassis. We coat the basket and all metal parts with an epoxy-acrylic finish. Our in-house e-coat process lets us control the thickness of that coating to within 0.001”. That’s the diameter of a human hair and it’s critical when working with close tolerance transducer motor designs. We then add front and rear sealing gaskets on each model to allow front or rear loading.
There are 24 unique models available in our American Standard series so it’s easy to find yours. Each is designed for versatility in a range of applications. And like our Professional series, every speaker comes standard with Made in the USA pride, and is backed by a Seven Year Warranty against manufacturer’s defects*. There are over 1,200 USA dealers and distributors worldwide. Visit www.eminence.com to find a dealer near you.
*Warranty policy may vary outside of the continental United States and Canada. Check with your local distributor for warranty details.
the eminence mission statement is “Quality, value, and service to meet our customer’s needs.”
From stage to studio and even the highway, our speakers speak for this mission. Eminence offers 6.5-15” models with applications ranging from standard sub-woofers, two-way enclosures, and coaxials, to truncated line array models, monitor woofers, and high performance midranges setting records for output in car audio. No other loudspeaker line provides more choices, power handling, performance, and reliability for the price.
19
comPatiBilityALPHA 6A j j j j j j
ALPHA 6C j j j j j j
LA6 CBMr j j
ALPHA 8A j j j j j
ALPHA 8MrA j j
BETA 8A j j j j j j
BETA 8Cx j j j j j
ALPHA 10A j j j j j j
BETA 10A j j j j j
BETA 10Cx j j j j j
dELTA 10A j j j j j
dELTA 10B j j j j j
ALPHA 12A j j j j j
BETA 12A j j j j j
BETA 12Cx j j j j j
BETA 12LTA j j j j j
dELTA 12A j j j j
dELTA 12B j j j j
dELTA 12LFA j j j j j j
dELTA 12LFC j j j j j
KAPPA 12A j j j j j
ALPHA 15A j j j j j
BETA 15A j j j j
dELTA 15A j j j j
dELTA 15B j j j j
dELTA 15LFA j j j j
gAMMA 15A j j j j
KAPPA 15A j j j j
KAPPA 15C j j j j
KAPPA 15LFA j j j j
ref
lex
Bo
x
ho
rn
lo
ad
ing
su
BW
oo
fer
us
ag
e
Wo
ofe
r u
sa
ge
mid
Ba
ss
us
ag
e
mid
ra
ng
e u
sa
ge
clo
sed
Bo
x
20
nominal Basket diameter
nominal impedance*
Power rating**
Watts
music Program
resonance
usable frequency range
sensitivity***
magnet Weight
gap height
voice coil diameter
resonant frequency (fs)
dc resistance (re)
coil inductance (le)
mechanical Q (Qms)
electromagnetic Q (Qes)
total Q (Qts)
compliance equivalent volume (vas)
Peak diaphragm displacement volume (vd)
mechanical compliance of suspension (cms)
Bl Product (Bl)
diaphragm mass inc. airload (mms)
efficiency Bandwidth Product (eBP)
maximum linear excursion (xmax)
surface area of cone (sd)
maximum mechanical limit (xlim)
recommended enclosure volume
sealed
vented
driver volume displaced
overall diameter
Baffle hole diameter
front sealing gasket
rear sealing gasket
mounting holes diameter
mounting holes B.c.d.
depth
net Weight
shipping Weight
coil construction
coil former
magnet composition
core details
Basket materials
cone composition
cone edge composition
dust cap composition
sPecification
thiele & small Parameters
mounting information
materials of construction
american standard series
* Please see footnotes on Page 3 for information regarding nominal imPedance, Power rating and sensitivity.
alPha-6a la6-cBmr alPha-8a
alPha-6a alPha-8ala6-cBmr6.5”, 165mm
8 or 4 ohms
100W
200W
118hz
85hz-6khz
93.6
20 oz.
0.25”, 6.35mm
1.5”, 38.1mm
118hz
7.2
0.19mh
5.68
0.60
0.54
5.8 liters / 0.2 cu.ft.
44cc
0.26mm/n
8.0 t-m
7 grams
197
3.5mm
126.7 cm2
4.0mm
2.8-5.7 liters/0.1-0.2 cu.ft.
3.4-15.6 liters/0.12-0.55 cu.ft.
25 cu.in / 0.41 liters
6.59”, 167.4mm
5.69”, 144.5mm
fitted as standard
fitted as standard
0.23”, 5.7mm
6.06”, 154mm
2.8”, 71mm
4.1 lbs., 1.9 kg
4.8 lbs., 2.2 kg
copper voice coil
Polyimide former
ferrite magnet
vented and extended core
Pressed steel basket
Paper cone
cloth cone edge
solid composition paper dust cap
6.5”, 165mm
8 ohms
150W
300W
460hz
500hz-5.4khz
97.8
38 oz.
0.31”, 7.92mm
1.5”, 38.1mm
460hz
6.3
0.33mh
3.13
1.24
0.89
0.4 liters / 0.01 cu.ft.
2.7cc
0.01mm/n
11.1 t-m
9 grams
371
0.2mm
133.1 cm2
0.8mm
acceptable
acceptable
38.1 cu.in / 0.62 liters
6.59”, 167mm/Width across flats: 6”, 152mm
5.65”, 143.5mm
fitted as standard
n/a
0.23”, 5.7mm
6.06”, 154mm
2.77”, 70mm
6.7 lbs., 3 kg
7.2 lbs., 3.3 kg
copper voice coil
Polyimide former
ferrite magnet
vented and extended core
Pressed steel basket with truncated sides
Paper cone
cloth cone edge
solid composition paper dust cap
8”, 203.2mm
8 ohms
125W
250W
73hz
58hz-5khz
94
20 oz.
0.25”, 6.35mm
1.5”, 38.1mm
73hz
5.3
0.44mh
4.6
0.68
0.59
17.7 liters / 0.6 cu.ft.
67cc
0.28mm/n
7.8 t-m
17 grams
107
3.2mm
210.0 cm2
7.1mm
5-7 liters/0.18-0.25 cu.ft.
16.7-25.5 liters/0.59-0.90 cu.ft.
35.3 cu.in / 0.58 liters
8.24”, 209.2mm
7.13”, 181mm
fitted as standard
fitted as standard
0.22”, 5.5mm
7.75”, 196.9mm
3.25”, 83mm
4.3 lbs., 1.9 kg
5.1 lbs., 2.3 kg
copper voice coil
Polyimide former
ferrite magnet
vented core
Pressed steel basket
Paper cone
cloth cone edge
solid composition paper dust cap
21WWW.eminence.com * Please see footnotes on Page 3 for information regarding nominal imPedance, Power rating and sensitivity.
Beta-8a Beta-8cxalPha-8mra alPha-10a
alPha-10aalPha-8mra Beta-8a Beta-8cx8”, 203.2mm
8 ohms
125W
250W
514hz
400hz-4.8khz
100.9
20 oz.
0.25”, 6.35mm
1.5”, 38.1mm
514hz
7.32
0.34mh
4.48
2.08
1.42
0.8 liters / 0.03 cu.ft.
0cc
0.01mm/n
8.9 t-m
6.9 grams
247
1.6mm
205.9 cm2
3.0mm
n/a
n/a
35.3 cu.in / 0.58 liters
8.22”, 208.8mm
7.19”, 182.5mm
fitted as standard
fitted as standard
0.22”, 5.5mm
7.75”, 196.9mm
3.25”, 83mm
4.4 lbs., 2 kg
5.1 lbs., 2.3 kg
copper voice coil
Polyimide former
ferrite magnet
vented core
Pressed steel basket with closed back
Paper cone
Paper cone edge
solid composition paper dust cap
8”, 203.2mm
8 ohms
225W
450W
65hz
78hz-4.5khz
95.1
34 oz.
0.312”, 7.92mm
2”, 50.8mm
65hz
5.99
0.49mh
4.95
0.42
0.38
23.3 liters / 0.82 cu.ft.
63cc
0.37mm/n
9.6 t-m
16 grams
156
3.0mm
210.0 cm2
7.4mm
5.7-9.9 liters/0.2-0.35 cu.ft.
8.5-19 liters/0.3-0.67 cu.ft.
46.3 cu.in / 0.76 liters
8.24”, 209.2mm
7.13”, 181mm
fitted as standard
fitted as standard
0.22”, 5.5mm
7.75”, 196.9mm
3.5”, 89mm
6.6 lbs., 3 kg
7.4 lbs., 3.4 kg
aluminum voice coil
Polyimide former
ferrite magnet
vented core
Pressed steel basket
Paper cone
cloth cone edge
solid composition paper dust cap
8”, 203.2mm
8 ohms
250W
500W
63hz
74hz-20khz
93.3
38 oz.
0.313”, 7.94mm
2”, 50.8mm
63hz
5.6
0.85mh
8.82
0.34
0.33
19.99 liters / .71 cu.ft.
67.20cc
0.32mm/n
11.1 t-m
18.3 grams
193.1
3.2mm
210.0 cm2
6.9mm
3-10 liters/ 0.1-0.4 cu.ft.
8-21 liters/0.3-0.8 cu.ft.
48.4 cu.in / 0.79 liters
8.24”, 209.3mm
7.13”, 181.1mm
fitted as standard
fitted as standard
0.22”, 5.6mm
7.75”, 196.9mm
3.5”, 88.9mm
6.8 lbs., 3.1 kg
7.5 lbs., 3.4 kg
copper voice coil
Kapton former
ferrite magnet
tapered coax
Pressed steel basket
treated Paper cone
sealed cloth cone edge
Zurette dust cap
10”, 254mm
8 ohms
150W
300W
50hz
57hz-4.5khz
95.6
20 oz.
0.25”, 6.35mm
1.5”, 38.1mm
50hz
5.31
0.66mh
5.21
0.66
0.59
82.2 liters / 2.9 cu.ft.
114cc
0.46mm/n
7.5 t-m
22 grams
76
3.2mm
355.4 cm2
9.1mm
8.5-11.3 liters/0.3-0.4 cu.ft.
28.3-53.8 liters/1.0-1.9 cu.ft.
58.1 cu.in / 0.95 liters
10.11”, 256.8mm
9.13”, 231.8mm
fitted as standard
fitted as standard
0.23”, 5.7mm
9.6”, 243.8mm
3.90”, 99mm
4.5 lbs., 2 kg
5.6 lbs., 2.5 kg
copper voice coil
Polyimide former
ferrite magnet
vented and extended core
Pressed steel basket
Paper cone
cloth cone edge
solid composition paper dust cap
22
nominal Basket diameter
nominal impedance*
Power rating**
Watts
music Program
resonance
usable frequency range
sensitivity***
magnet Weight
gap height
voice coil diameter
resonant frequency (fs)
dc resistance (re)
coil inductance (le)
mechanical Q (Qms)
electromagnetic Q (Qes)
total Q (Qts)
compliance equivalent volume (vas)
Peak diaphragm displacement volume (vd)
mechanical compliance of suspension (cms)
Bl Product (Bl)
diaphragm mass inc. airload (mms)
efficiency Bandwidth Product (eBP)
maximum linear excursion (xmax)
surface area of cone (sd)
maximum mechanical limit (xlim)
recommended enclosure volume
sealed
vented
driver volume displaced
overall diameter
Baffle hole diameter
front sealing gasket
rear sealing gasket
mounting holes diameter
mounting holes B.c.d.
depth
net Weight
shipping Weight
coil construction
coil former
magnet composition
core details
Basket materials
cone composition
cone edge composition
dust cap composition
sPecification
thiele & small Parameters
mounting information
materials of construction
american standard series
* Please see footnotes on Page 3 for information regarding nominal imPedance, Power rating and sensitivity.
Beta-10a Beta-10cx delta-10a
Beta-10a Beta-10cx delta-10a10”, 254mm
8 ohms
250W
500W
53hz
51hz-3.8khz
97
34 oz.
0.312”, 7.92mm
2”, 50.8mm
53hz
5.75
0.67mh
8.14
0.52
0.49
60.1 liters / 2.1 cu.ft.
102cc
0.36mm/n
9.6 t-m
25 grams
103
3.0mm
344.9 cm2
8.6mm
8.5-14.2 liters/0.3-0.5 cu.ft.
19.8-70.8 liters/0.7-2.5 cu.ft.
69.1 cu.in / 1.13 liters
10.11”, 256.8mm
9.13”, 231.8mm
fitted as standard
fitted as standard
0.23”, 5.7mm
9.6”, 243.8mm
3.98”, 101mm
6.8 lbs., 3.1 kg
7.8 lbs., 3.6 kg
aluminum voice coil
Polyimide former
ferrite magnet
vented core
Pressed steel basket
Paper cone
cloth cone edge
solid composition paper dust cap
10”, 254mm
8 ohms
250W
500W
48hz
58hz-20khz*
95.1
38 oz.
0.312”, 7.92mm
2”, 50.8mm
48hz
5.53
0.75mh
5.21
0.43
0.39
64.2 liters / 2.3 cu.ft.
173cc
0.39mm/n
10.4 t-m
27 grams
114
5.0mm
344.9 cm2
7.6mm
14.2-19.8 liters/0.5-0.7 cu.ft.
15.6-85 liters/0.55-3 cu.ft.
71.3 cu.in / 1.17 liters
10.08”, 256.1mm
9.05”, 229.7mm
fitted as standard
fitted as standard
0.25”, 6.4mm
9.66”, 245.4mm
3.98”, 101mm
7.3 lbs., 3.3 kg
8.4 lbs., 3.8 kg
copper voice coil
Polyimide former
ferrite magnet
vented and extended core
Pressed steel basket
Paper cone
cloth cone edge
screened cloth dust cap
10”, 254mm
8 or 16 ohms
350W
700W
66hz
63hz-3.7khz
98.8
56 oz.
0.375”, 9.53mm
2.5”, 63.5mm
66hz
5.42
0.74mh
6.53
0.35
0.33
30.5 liters / 1.1 cu.ft.
121cc
0.18mm/n
14.4 t-m
32 grams
189
3.5mm
344.9 cm2
9.4mm
n/a
12.7-37.9 liters/0.45-1.34 cu.ft.
86.5 cu.in / 1.42 liters
10.09”, 256.2mm
9.05”, 229.7mm
fitted as standard
fitted as standard
0.25”, 6.4mm
9.66”, 245.4mm
4.25”, 108mm
10.8 lbs., 4.9 kg
12 lbs., 5.4 kg
aluminum voice coil
Polyimide former
ferrite magnet
vented core
Pressed steel basket
Paper cone
cloth cone edge
solid composition paper dust cap
23WWW.eminence.com * Please see footnotes on Page 3 for information regarding nominal imPedance, Power rating and sensitivity.
Beta-12a-2alPha-12a Beta-12cx Beta-12lta
12”, 304.8mm
8 ohms
250W
500W
47hz
66hz-20khz*
96.4
38 oz.
0.312”, 7.92mm
2”, 50.8mm
47hz
5.57
1.01mh
6.69
0.51
0.48
161 liters / 5.7 cu.ft.
186cc
0.40mm/n
10.0 t-m
34 grams
84
3.5mm
532.4 cm2
10.4mm
42.5-28 liters/1-1.5 cu.ft.
37-71 liters/1.3-2.5 cu.ft.
122 cu.in / 2 liters
12.03”, 305.5mm
10.95”, 278.1mm
fitted as standard
fitted as standard
0.25”, 6.4mm
11.59”, 294.3mm
4.47”, 114mm
7.8 lbs., 3.5 kg
10 lbs., 4.5 kg
copper voice coil
Polyimide former
ferrite magnet
extended core
Pressed steel basket
Paper cone
cloth cone edge
screened cloth dust cap
12”, 304.8mm
8 ohms
225W
450W
45hz
48hz-8khz
97.7
38 oz.
0.312”, 7.92mm
2”, 50.8mm
45hz
7.37
0.83mh
6.44
0.55
0.51
136.3 liters / 4.8 cu.ft.
170cc
0.34mm/n
11.7 t-m
36 grams
82
3.2mm
532.4 cm2
8.0mm
14-51 liters/0.5-1.8 cu.ft.
56.6-116 liters/2-4.1 cu.ft.
122 cu.in / 2 liters
12.03”, 305.5mm
10.95”, 278.1mm
fitted as standard
fitted as standard
0.25”, 6.4mm
11.59”, 294.3mm
4.47”, 114mm
8.1 lbs., 3.7 kg
10.2 lbs., 4.6 kg
copper voice coil
Polyimide former
ferrite magnet
vented core
Pressed steel basket
Paper cone
cloth cone edge
solid composition paper dust cap
alPha-12a Beta-12a-2 Beta-12cx Beta-12lta12”, 304.8mm
8 ohms
150W
300W
49hz
51hz-4.3khz
95.6
20 oz.
0.25”, 6.35mm
1.5”, 38.1mm
49hz
6.3
0.79mh
6.53
0.88
0.77
121.5 liters / 4.3 cu.ft.
125cc
0.32mm/n
8.5 t-m
33 grams
56
2.4mm
519.5 cm2
6.6mm
17-22.7 liters/0.6-0.8 cu.ft.
56.6-113.3 liters/2-4 cu.ft.
108.9 cu.in / 1.78 liters
12.26”, 311.4mm
11”, 279.5mm
fitted as standard
fitted as standard
0.25”, 6.4mm
11.71”, 297.5mm
4.73”, 120mm
5.3 lbs., 2.4 kg
7.4 lbs., 3.4 kg
copper voice coil
Polyimide former
ferrite magnet
vented and extended core
Pressed steel basket
Paper cone
cloth cone edge
solid composition felt dust cap
12”, 304.8mm
8 ohms
250W
500W
47hz
43hz-3.8khz
98
38 oz.
0.312”, 7.92mm
2”, 50.8mm
47hz
5.0
0.64mh
6.00
0.50
0.46
120.1 liters / 4.2 cu.ft.
237cc
0.29mm/n
10.8 t-m
40 grams
94
4.4mm
538.9 cm2
11mm
25.5-35.4 liters, 0.9-1.25 cu.ft.
36.8-139 liters/1.3-4.9 cu.ft.
122 cu.in / 2 liters
12.03”, 305.5mm
10.95”, 278.1mm
fitted as standard
fitted as standard
0.25”, 6.4mm
11.59”, 294.3mm
4.57”, 116mm
7.5 lbs., 3.4 kg
9.7 lbs., 4.4 kg
copper voice coil
Polyimide former
ferrite magnet
vented and extended core
Pressed steel basket
Paper cone
cloth cone edge
solid composition paper dust cap
24
nominal Basket diameter
nominal impedance*
Power rating**
Watts
music Program
resonance
usable frequency range
sensitivity***
magnet Weight
gap height
voice coil diameter
resonant frequency (fs)
dc resistance (re)
coil inductance (le)
mechanical Q (Qms)
electromagnetic Q (Qes)
total Q (Qts)
compliance equivalent volume (vas)
Peak diaphragm displacement volume (vd)
mechanical compliance of suspension (cms)
Bl Product (Bl)
diaphragm mass inc. airload (mms)
efficiency Bandwidth Product (eBP)
maximum linear excursion (xmax)
surface area of cone (sd)
maximum mechanical limit (xlim)
recommended enclosure volume
sealed
vented
driver volume displaced
overall diameter
Baffle hole diameter
front sealing gasket
rear sealing gasket
mounting holes diameter
mounting holes B.c.d.
depth
net Weight
shipping Weight
coil construction
coil former
magnet composition
core details
Basket materials
cone composition
cone edge composition
dust cap composition
sPecification
thiele & small Parameters
mounting information
materials of construction
american standard series
* Please see footnotes on Page 3 for information regarding nominal imPedance, Power rating and sensitivity.
delta-12a delta-12lfa delta-12lfc
delta-12a delta-12lfa delta-12lfc12”, 304.8mm
8 ohms
500W
1000W
51hz
44hz-3khz
94.6
56 oz.
0.375”, 9.53mm
2.5”, 63.5mm
51hz
6.06
1.45mh
7.28
0.51
0.47
67.9 liters / 2.4 cu.ft.
243cc
0.19mm/n
14.1 t-m
51 grams
100
4.8mm
506.7 cm2
13.5mm
19.8-28 liters/0.7-1.0 cu.ft.
25.5-102 liters/0.9-3.6 cu.ft.
137.3 cu.in / 2.25 liters
12.03”, 305.5mm
10.95”, 278.1mm
fitted as standard
fitted as standard
0.25”, 6.4mm
11.59”, 294.3mm
5.35”, 136mm
11.8 lbs., 5.4 kg
14 lbs., 6.4 kg
copper voice coil
Polyimide former
ferrite magnet
vented and extended core
Pressed steel basket
Paper cone
cloth cone edge
solid composition paper dust cap
12”, 304.8mm
8 or 16 ohms
400W
800W
55hz
54hz-5khz
98.3
56 oz.
0.375”, 9.53mm
2.5”, 63.5mm
55hz
6.3
0.74mh
5.27
0.46
0.43
81.3 liters / 2.9 cu.ft.
125cc
0.21mm/n
13.5 t-m
39 grams
120
2.4mm
519.5 cm2
9.9mm
n/a
25.5-85 liters/0.9-3 cu.ft.
137.3 cu.in / 2.25 liters
12.03”, 305.5mm
10.95”, 278.1mm
fitted as standard
fitted as standard
0.25”, 6.4mm
11.59”, 294.3mm
5.35”, 136mm
11.4 lbs., 5.2 kg
13.5 lbs., 6.1 kg
aluminum voice coil
Polyimide former
ferrite magnet
vented core
Pressed steel basket
Paper cone
cloth cone edge
solid composition felt dust cap
12”, 304.8mm
4 ohms
500W
1000W
52hz
45hz-2.3khz
93.1
56 oz.
0.375”, 9.53mm
2.5”, 63.5mm
52hz
3.2
.94mh
8.21
.47
.44
63.7 liters / 2.3 cu.ft.
249cc
0.17mm/n
10.9 t-m
53 grams
111.4
4.8mm
519.5 cm2
13.5mm
21-74 liters/0.7-2.6 cu.ft.
28-110 liters/1.0-3.9 cu.ft.
137.3 cu.in / 2.25 liters
12.03”, 305.5mm
10.95”, 278.1mm
fitted as standard
fitted as standard
0.25”, 6.4mm
11.59”, 294.4mm
5.88”, 149.35mm
11.8 lbs., 5.4 kg
14 lbs., 6.4 kg
copper voice coil
Kapton
ferrite magnet
vented and extended core
Pressed steel basket
treated Paper cone
cloth cone edge
solid composition paper dust cap
25WWW.eminence.com * Please see footnotes on Page 3 for information regarding nominal imPedance, Power rating and sensitivity.
Beta-15aalPha-15a delta-15aKaPPa-12a
alPha-15a Beta-15a delta-15aKaPPa-12a12”, 304.8mm
8 ohms
450W
900W
45hz
62hz-4.2khz
99.3
80 oz.
0.375”, 9.53mm
3”, 76.2mm
45hz
5.41
0.77mh
7.76
0.28
0.27
112.1 liters / 4.0 cu.ft.
166cc
0.30mm/n
15.2 t-m
42 grams
161
3.2mm
519.5 cm2
11.5mm
n/a
34-62 liters/1.2-2.2 cu.ft.
155.5 cu.in / 2.55 liters
12.26”, 311.4mm
11.0”, 279.5mm
fitted as standard
fitted as standard
0.25”, 6.4mm
11.71”, 297.5mm
5.63”, 143mm
14.9 lbs., 6.8 kg
17.9 lbs., 8.2 kg
aluminum voice coil
Polyimide former
ferrite magnet
vented core
Pressed steel basket
Paper cone
cloth cone edge
solid composition paper dust cap
15”, 381mm
8 ohms
200W
400W
41hz
46hz-3.5khz
97
25 oz.
0.25”, 6.35mm
1.5”, 38.1mm
41hz
5.88
0.84mh
7.23
1.53
1.26
260.0 liters / 9.2 cu.ft.
325cc
0.25mm/n
7.7 t-m
59 grams
27
3.8mm
856.3 cm2
8.4mm
71-85 liters/2.5-3 cu.ft.
106-177 liters/3.75-6.25 cu.ft.
195.9 cu.in / 3.21 liters
15.15”, 384.8mm
13.77”, 349.6mm
fitted as standard
fitted as standard
0.25”, 6.4mm
14.56”, 369.9mm
5.83”, 148mm
6.7 lbs., 3 kg
8.8 lbs., 4 kg
copper voice coil
Polyimide former
ferrite magnet
vented and extended core
Pressed steel basket
Paper cone
cloth cone edge
solid composition paper dust cap
15”, 381mm
8 ohms
300W
600W
35hz
45hz-3.7khz
98.2
34 oz.
0.312”, 7.92mm
2”, 50.8mm
35hz
6.32
1.10mh
8.10
0.63
0.58
334.6 liters / 11.8 cu.ft.
330cc
0.35mm/n
11.5 t-m
60 grams
56
4.0mm
823.7 cm2
11.6mm
45-62 liters/1.6-2.2 cu.ft.
99-175.6 liters/3.5-6.2 cu.ft.
203.3 cu.in / 3.33 liters
15.15”, 384.8mm
13.77”, 349.6mm
fitted as standard
fitted as standard
0.25”, 6.4mm
14.56”, 369.9mm
6.05”, 154mm
8.8 lbs., 4 kg
10.8 lbs., 4.9 kg
copper voice coil
Polyimide former
ferrite magnet
vented and extended core
Pressed steel basket
Paper cone
cloth cone edge
solid composition paper dust cap
15”, 381mm
8 or 16 ohms
400W
800W
40hz
48hz-4khz
100
56 oz.
0.375”, 9.53mm
2.5”, 63.5mm
40hz
6.3
0.64mh
8.05
0.57
0.53
270.7 liters / 9.56 cu.ft
233cc
0.26mm/n
13.2 t-m
62 grams
70
2.7mm
864.6 cm2
11.1mm
37-42.5 liters/1.3-1.5 cu.ft.
82-161.4 liters/2.9-5.7cu.ft.
220.8 cu.in / 3.62 liters
15.15”, 384.8mm
13.77”, 349.6mm
fitted as standard
fitted as standard
0.25”, 6.4mm
14.56”, 369.9mm
6.05”, 154mm
12.3 lbs., 5.6 kg
14.4 lbs., 6.5 kg
aluminum voice coil
Polyimide former
ferrite magnet
vented core
Pressed steel basket
Paper cone
cloth cone edge
solid composition paper dust cap
26
nominal Basket diameter
nominal impedance*
Power rating**
Watts
music Program
resonance
usable frequency range
sensitivity***
magnet Weight
gap height
voice coil diameter
resonant frequency (fs)
dc resistance (re)
coil inductance (le)
mechanical Q (Qms)
electromagnetic Q (Qes)
total Q (Qts)
compliance equivalent volume (vas)
Peak diaphragm displacement volume (vd)
mechanical compliance of suspension (cms)
Bl Product (Bl)
diaphragm mass inc. airload (mms)
efficiency Bandwidth Product (eBP)
maximum linear excursion (xmax)
surface area of cone (sd)
maximum mechanical limit (xlim)
recommended enclosure volume
sealed
vented
driver volume displaced
overall diameter
Baffle hole diameter
front sealing gasket
rear sealing gasket
mounting holes diameter
mounting holes B.c.d.
depth
net Weight
shipping Weight
coil construction
coil former
magnet composition
core details
Basket materials
cone composition
cone edge composition
dust cap composition
sPecification
thiele & small Parameters
mounting information
materials of construction
american standard series
* Please see footnotes on Page 3 for information regarding nominal imPedance, Power rating and sensitivity.
KaPPa-15agamma 15a-2
gamma 15a-2 KaPPa-15a
delta-15lfa
delta-15lfa15”, 381mm
8 ohms
500W
1000W
39hz
42hz-3.2khz
96
56 oz.
0.375”, 9.53mm
2.5”, 63.5mm
39hz
6.11
1.37mh
6.3
0.52
0.48
241.0 liters / 8.51 cu.ft.
419cc
0.23mm/n
14.6 t-m
75 grams
75
4.8mm
873.0 cm2
16.5mm
36.8-42.5 liters/1.3-1.5 cu.ft.
85-167 liters/3-5.9 cu.ft.
220.8 cu.in / 3.62 liters
15.15”, 384.8mm
13.77”, 349.6mm
fitted as standard
fitted as standard
0.25”, 6.4mm
14.56”, 369.9mm
6.3”, 160mm
12.8 lbs., 5.8 kg
14.8 lbs., 6.7 kg
copper voice coil
Polyimide former
ferrite magnet
vented and extended core
Pressed steel basket
Paper cone
cloth cone edge
solid composition paper dust cap
15”, 381mm
8 ohms
300W
600W
33hz
48hz-3.3khz
98.6
59 oz.
0.312”, 7.92mm
2”, 50.8mm
33hz
5.98
1.73mh
5.13
0.32
0.30
314.1 liters / 11.1 cu.ft.
257cc
0.31mm/n
17.2 t-m
78 grams
103
3.0mm
856.3 cm2
11.8mm
n/a
40-136 liters/1.4-4.8 cu.ft.
220.8 cu.in / 3.62 liters
15.15”, 384.8mm
13.77”, 349.6mm
fitted as standard
fitted as standard
0.25”, 6.4mm
14.56”, 369.9mm
5.94”, 151mm
11.8 lbs., 5.4 kg
14.1 lbs., 6.4 kg
aluminum voice coil
Polyimide former
ferrite magnet
vented core
Pressed steel basket
Paper cone
cloth cone edge
solid composition paper dust cap
15”, 381mm
8 or 4 ohms
450W
900W
33hz
52hz-2.3khz
100.5
80 oz.
0.375”, 9.53mm
3”, 76.2mm
33hz
5.22
1.05mh
8.90
0.33
0.32
321.3 liters / 11.35 cu.ft.
343cc
0.31mm/n
15.7 t-m
76 grams
98
4.0mm
856.3 cm2
11.6mm
n/a
45-113 liters/1.6-4 cu.ft.
239 cu.in / 3.92 liters
15.16”, 384.9mm
13.77”, 349.6mm
fitted as standard
fitted as standard
0.25”, 6.4mm
14.56”, 369.9mm
6.13”, 156mm
17.6 lbs., 8 kg
19.8 lbs., 9 kg
copper voice coil
Polyimide former
ferrite magnet
vented core
Pressed steel basket
Paper cone
cloth cone edge
solid composition paper dust cap
The h2ea is a rugged, cast aluminum 2” throat horn, incorporating an exponential flare for optimized acoustic loading and energy transfer. its compact size makes it ideal for sound reproduction in small, medium, and large-size venues. See page 29 for more information.
KaPPa-15lfa
hf Products & comPonents
Whether for use in Eminence loaded cabinets or an upgrade to an existing system, Eminence HF drivers achieve extraordinary levels of audio performance. Add to that the same unrivaled durability you’ve come to expect from Eminence bass and midrange transducers, and you’ve got true professional value.
The Eminence assortment of horns is engineered to provide the perfect compliment to Eminence HF drivers. Each horn is manufactured from the highest quality materials to obtain a balance of strength, durability, and weight savings.
Eminence Professional Series crossovers are technically superior passive filters available in board-only or cabinet-ready configurations. Our high-pass protection circuits center around custom manufactured aerospace lamps, working as positive temperature coefficient series varistors to protect your HF device without introducing distortion. From low-pass and high-pass filters, to two-way and three-way units with multiple crossover point options, and L-PAds for more custom HF level control, there is an Eminence crossover solution to meet your needs.
No loudspeaker system or musical performance is complete without high quality, durable HF devices, well-designed horns, and high-performance crossovers.
Buyeminence.comyour B2B loudsPeaKer suPer store!
KaPPa-15lfa
neW: 2” throat h2ea horn flare
15”, 381mm
8 ohms
600W
1200W
39hz
38hz-2.7khz
99
95 oz.
0.375”, 9.53mm
3”, 76.2mm
39hz
5.4
1.27mh
6.08
0.41
0.38
159.0 liters / 5.6 cu.ft.
471cc
0.15mm/n
18.6 t-m
105 grams
95
5.5mm
856.3 cm2
10.4mm
n/a
62-193 liters/2.2-6.8 cu.ft.
251.7 cu.in / 4.12 liters
15.16”, 384.9mm
13.77”, 349.6mm
fitted as standard
fitted as standard
0.25”, 6.4mm
14.56”, 369.9mm
6.38”, 162mm
20 lbs., 9.1 kg
22.3 lbs., 10.1 kg
copper voice coil
Polyimide former
ferrite magnet
vented core
Pressed steel basket
Paper cone
cloth cone edge
solid composition paper dust cap
28
throat size
nominal impedance*
Power rating**
resonance
usable frequency range
recommended crossover
sensitivity***
magnet Weight
voice coil diameter
diaphragm material
re
throat size
nominal impedance*
Power rating**
resonance
usable frequency range
recommended crossover
sensitivity***
magnet Weight
voice coil diameter
voice coil former
diaphragm material
re
overall diameter
depth
Weight
mounting thread
overall diameter
depth
Weight
mounting holes diameter
mounting holes B.c.d.
mounting thread
sPecification
sPecification
mounting information
mounting information
* Please see footnotes on Page 3 for information regarding nominal imPedance, Power rating and sensitivity.
drivers
asd:1001 aPt:50
nsd:2005 Psd:2002 Psd:3006
the nsd:2005 and Psd:2002 drivers are available in either screw-on or bolt-on formats. Please sPecify your Preferences when ordering. the Psd:3006 is bolt-on only.
2", 50.8mm
8 ohms
100W
470hz
800hz-20khz
see Power rating
109dB
80 oz
3", 76.2mm
Polyimide
titanium w/geodesic design for increased strength and stiffness
4.8 ohms
3.5", 88.9mm
2.45", 62mm
2 lbs / 0.9 kg
1 3/8" 18 nef ext.
1", 25.4mm
8 ohms
50W @ 2.5khz
1.23khz
2.5khz-20khz
2.5khz/18dB
104.3dB
12 oz, .34 kg
1.3", 33mm
diamond titanium
6.7
2.75", 70mm
2.5", 63.5mm
1.63 lbs /0.74 kg
1 3/8” 18 nef ext. for mounting on
coaxial speakers or screw-on horns.
1", 25.4mm
8 ohms
45W @ 3.5khz, 85Wrms @5khz
1.6khz
3.5hz-20khz
3.5khz
104dB
7.75 oz, .22 kg
1.0"/25.4mm
Phenolic
6.3
3.87", 98.3mm
1.75", 44mm
2 lbs / 0.9 kg
2x 1/4-20
3"
1 3/8" 18 nef ext.
1", 25.4mm
8 or 16 ohms
50W
578hz
1.5khz-20khz
1.5khz/12dB
108.4dB
4.16 oz
2", 51mm
Polyimide
titanium
6.8
5.25", 133mm
2.2", 56mm
5 lbs, gross 5.76 lbs
2x 1/4-20 or 3x m6
3" or 2.25"
1 3/8" 18 nef ext.
1", 25.4mm
8 or 16 ohms
80W
540hz
1.2khz-20khz
1.2khz/18dB or 1.8khz/12dB
106.1dB
34 oz
2", 51mm
Polyimide
titanium
6.1
7.9", 200.7mm
3.1", 78.7mm
13.5 lbs / 6.12 kg
#4 (1/4-20)
4", 101.6mm
n/a
@ 1w/1m across 800hz-20khz on axis on h2ea horn
multiPle units exceeding Published rating evaluated under aes noise source and tested standard while mounted on the h290 horn in a non-temPerature controlled environment.
******
29WWW.eminence.com
dispersion
dimensions
cut-out
depth
Weight
* Please see footnotes on Page 3 for information regarding nominal imPedance, Power rating and sensitivity.
suPertWeeter oPtions
horn flares
type
throat size
dispersion
lowest rec. crossover
Width/height/depth
Width/height/depth (mm)
cut-out
Weight
type
throat size
dispersion
lowest rec. crossover
Width/height/depth
Width/height/depth (mm)
cut-out
Weight
sPecification
sPecification
h290 h290s h295 h395
sst1 lt250 h2ea Bh410
aPt:3 adaPtor B2s adaPtor toP hat-ch
aPt:80 aPt:150 aPt:200
radial
1", 25mm
90 x 40
1khz
11.4" x 6.5" x 5.9"
290 x 165 x 150mm
10.3" x 4.9", 260 x 126mm
1.8 lbs, 818 grams
radial
1", 25mm
90 x 40
1khz
11.7" x 6.6" x 6.6"
297 x 168 x 168mm
9.7" x 4.9", 246 x 124mm
1.1 lbs, 500 grams
constant directivity
1", 25mm
90 x 40
1khz
12.1" x 6" x 4"
307 x 152 x 102mm
10.5" x 4.3", 267 x 109mm
1.3 lbs, 591 grams
constant directivity
1", 25mm
90 x 40
1khz
15.6" x 7.3" x 6.1"
396 x 185 x 155mm
13.9" x 5.9", 355 x 150mm
1.8 lbs, 818 grams
constant directivity
1", 25mm
90 x 40
1khz
9.8" x 7.7" x 5.2"
249 x 196 x 132mm
8.5" x 6.4", 216 x 163mm
1.7 lbs, 773 grams
constant directivity
1", 25mm
60 x 40
1khz
6.7" x 6.4" x 4.2"
170 x 163 x 107mm
5.4" x 5.2", 137 x 132mm
0.8 lbs, 364 grams
exponential
2", 51mm
60 x 40
700hz
12.4" x 7.3" x 6.1"
315 x 185 x 155mm
11.3" x 6.3", 287 x 160mm
4.9 lbs, 2.24 kg
exponential
1", 25mm
60 x 60
1khz
5.59" x 5.59" x 4.38"
141.9 x 141.9 x 111.2mm
3.56" x 3.56", 90.4 x 90.4mm
.35 lbs, 159 grams
apt:3 adaptor converts the aPt:50
to 1 3/8" 18 nef ext. for mounting on
coaxial speakers or screw-on horns.
converts bolt-on driver to
accept a screw-on horn.
2x 1/4-20 or 3x m6 driver
to 1 3/8” 18nef ext. horn.
adjustable-angle speaker stand
receptacle for loudspeaker boxes.
vertical angle can be adjusted in
4º increments to +/- 18º. fits sPs56B
and most other standard speaker
stands. internal Ø 36mm. Black
Polyamide. Patent pending.
80° conical
3.4"x3.4", 87mm x 87mm
3.15", 80mm
2.9", 73.6mm
1.6 lbs, 727 grams
100 x 50
7.5"x4.5", 191mm x 114mm
6.7" x 3.4", 170mm x 86mm
4.5", 114.3mm
2 lbs, 909 grams
90 x 90
5.9"x5.9", 150mm x 150mm
4.25"x4.5", 108mm x 114
5.1", 129.5mm
2.5 lbs, 1136 grams
high-quality materials. crafted to perform and endure.
www.eminence.com MADE IN THE USA
The Tone is in the Details.
type
cabinet ready*
crossover frequency
slope
impedance
Power handling
hf level
mounting cut-out
mounting cut-out (mm)
type
cabinet ready*
crossover frequency
slope
impedance
Power handling
hf level
mounting cut-out
mounting cut-out (mm)
type
cabinet ready*
crossover frequency
slope
impedance
Power handling
sPecification
sPecification
sPecification
31WWW.eminence.com * Please see footnotes on Page 3 for information regarding nominal imPedance, Power rating and sensitivity.
Px:250 PxB:250 PxB:500 PxB:1k6 PxB:3k5 PxB:5k0
Px2:1k6 Px2:3k5 Px2:5k0 PxB2:500 PxB2:800 PxB2:1k6
PxB2:3k5PxB2:2k5 cx PxB2:5k0 PxB3:1k6 PxB3:3k5 PxB3:5k0
**Picture at toP of Page shows cabinet-ready Px crossover (left) and board-only Px crossover (right).
crossovers
low-Pass
yes
250hz
12dB/octave
Butterworth
8 ohms
600W
3.875" x 6"
98.4 x 152.4mm
low-Pass
no
250hz
12dB/octave
Butterworth
8 ohms
600W
low-Pass
no
500hz
12dB/octave
Butterworth
8 ohms
600W
high-Pass
no
1.6khz
18dB/octave
Butterworth
8 ohms
400W
high-Pass
no
3.5khz
18dB/octave
Butterworth
8 ohms
400W
high-Pass
no
5khz
18dB/octave
Butterworth
8 ohms
400W
2-way
yes
1.6khz
12dB/octave lP
18dB/octave hP
Butterworth
8 ohms
400W
9dB
3.875" x 6"
98.4 x 152.4mm
2-way
yes
3.5khz
12dB/octave lP
18dB/octave hP
Butterworth
8 ohms
400W
9dB
3.875" x 6"
98.4 x 152.4mm
2-way
yes
5khz
12dB/octave lP
18dB/octave hP
Butterworth
8 ohms
400W
9dB
3.875" x 6"
98.4 x 152.4mm
2-way
no
500hz
12dB/octave lP
18dB/octave hP
Butterworth
8 ohms
400W
2-way
no
800hz
12dB/octave lP
18dB/octave hP
Butterworth
8 ohms
400W
2-way
no
1.6khz
12dB/octave lP
18dB/octave hP
Butterworth
8 ohms
400W
2-way
no
3.5khz
12dB/octave lP
18dB/octave hP
Butterworth
8 ohms
400W
2-way
no
2.5khz
12dB/octave lP
12dB/octave hP
custom
8 ohms
250W
type: l-Pad
cabinet ready: yes
impedance: 8 ohms
Power handling: 100W
2-way
no
5khz
12dB/octave lP
18dB/octave hP
Butterworth
8 ohms
400W
3-way
no
500hz/1.6khz
12dB/octave lP
6dB/octave mP
18dB/octave hP
Butterworth
8 ohms
400W
3-way
no
500hz/3.5khz
12dB/octave lP
6dB/octave mP
18dB/octave hP
Butterworth
8 ohms
400W
3-way
no
500hz/5khz
12dB/octave lP
6dB/octave mP
18dB/octave hP
Butterworth
8 ohms
400W
PX-LPAD
eminence.comProudly presenting the ultimate solution for comparative evaluation of guitar speakers. Log on today to review our guitar speaker
tone guide & sound cliPs.
guitar sPeaKersWhether it’s changing pickups, a new stomp-box or holding your tongue just right, guitarists are always looking for ways to get that tone. Here’s a fact - the most overlooked tool in the tone toolbox is the loudspeaker. Nothing short of changing amplifiers or guitars can make such a difference in your tone. The guitar amp speaker is the last element in the tone chain connecting your sound to the audience. it affects your overall coloration, articulation, low-end, midrange, highs, shape and extension, and ability to cut through any mix. The right speaker can offer you a deep, rich mellow flavor; an articulate, percussive and driving clean sound; or a growling, howling guitar on fire. Along with your rig and your style, your speaker provides a tonal palette that only you can imagine.
Eminence offers you over 30 unique specifications for Acoustic and Electric guitar amps. We have a tone that’s right for you and your rig. A tone that only you can call your own.
Our speakers are made for the working musician. With a seven-year warranty inside the continental United States, the pride of being Made in the USA, and a price that’s as easy to handle as a 12-bar blues line.
it’s never been easier to “Pick your sound.”
The Eminence Tone Center, consisting of a 4x12 cabinet loaded with four uniquely voiced guitar speakers and a foot switch, finally offers the consumer the ability to play through a selection of speakers by plugging in any amplifier of their choice. With full color graphics and product information cards for each model, this retail display makes a consumer’s purchase decision easy.
take control of your tone
with eminence.
www.eminence .com
now available from eminence!the mavericK™ and reignmaKer™ with patent-pending fdm™ technology have put a new twist on guitar tone. Turning the modulator knob gives you complete control over the speaker’s output level, associated distortion, and tonal balance, helping you find that sweet spot of saturated tube tone but at a significantly lower volume.
50 Hz 100 200 500 1K 2K 5K 10K
dBSPL
70
75
80
85
90
95
100
105
110
No Turn 1/4 Turn 1/2 Turn 3/4 Turn Full Turn
a 300° knob turn offers warmer tones and nearly 9 dB of attenuation.
Tweak the knob for a wide range of tones: More attenuation affords a warmer tone while less attenuation restores volume and brightness.
Acoustic
34
nominal Basket diameter
nominal impedance*
Power rating**
Watts
music Program
resonance
usable frequency range
sensitivity***
magnet Weight
gap height
voice coil diameter
resonant frequency (fs)
dc resistance (re)
coil inductance (le)
mechanical Q (Qms)
electromagnetic Q (Qes)
total Q (Qts)
compliance equivalent volume (vas)
Peak diaphragm displacement volume (vd)
mechanical compliance of suspension (cms)
Bl Product (Bl)
diaphragm mass inc. airload (mms)
efficiency Bandwidth Product (eBP)
maximum linear excursion (xmax)
surface area of cone (sd)
maximum mechanical limit (xlim)
recommended enclosure volume
sealed
vented
driver volume displaced
overall diameter
Baffle hole diameter
front sealing gasket
rear sealing gasket
mounting holes diameter
mounting holes B.c.d.
depth
net Weight
shipping Weight
coil construction
coil former
magnet composition
core details
Basket materials
cone composition
cone edge composition
dust cap composition
sPecification
thiele & small Parameters
mounting information
materials of construction
* Please see footnotes on Page 3 for information regarding nominal imPedance, Power rating and sensitivity.
acoustinator™ nh2008 acoustinator™ n2012acoustinator™ cx2008
8”, 203.2mm
8 ohms
200W
400W
57hz
60hz-3.5khz
90.8
38 oz.
0.312”, 7.92mm
2”, 50.8mm
57hz
5.4
0.62mh
9.8
0.40
0.39
21.5 liters / 0.76 cu.ft.
64cc
0.33mm/n
10.7 t-m
24 grams
143
3.0mm
214.1 cm2
6.0mm
11-14 liters/ 0.38-0.48 cu.ft.
11-31 liters/ 0.4-1.1 cu.ft.
48.4 cu.in / 0.79 liters
8.24”, 209.2mm
7.13”, 181mm
fitted as standard
n/a
0.22”, 5.5mm
7.75”, 196.9mm
3.6”, 92mm
6.7 lbs., 3 kg
7.4 lbs., 3.4 kg
copper voice coil
Polyimide former
ferrite magnet
tapered coax core
Pressed steel basket
Polypropylene cone
rubber cone edge
Zurette dust cap
8”, 203.2mm
8 ohms
150W
300W
47hz
60hz-3.3khz
94.5
4 oz.
0.28”, 7.2mm
2”, 50.8mm
47hz
5.4
0.44mh
6.5
0.29
0.28
34 liters / 1.19 cu.ft.
76cc
0.50mm/n
11.2 t-m
23 grams
162
3.5mm
218.2 cm2
8.0mm
8-9.3 liters/ 0.28-0.33 cu.ft.
12-25.5 liters/ 0.41-0.9 cu.ft.
28.6 cu.in / 0.47 liters
8.24”, 209.2mm
7.13”, 181mm
fitted as standard
n/a
0.22”, 5.5mm
7.75”, 196.9mm
3.6”, 92mm
3.2 lbs., 1.5 kg
3.9 lbs., 1.8 kg
copper voice coil
Polyimide former
neodymium magnet
non-vented core
Pressed steel basket
hemp cone ô
santoprene cone edge
solid composition felt dust cap
12”, 304.8mm
8 ohms
150W
300W
31hz
40hz-3.5khz
94.7
4 oz.
0.28”, 7.2mm
2”, 50.8mm
31hz
7.03
0.59mh
12.92
0.54
0.52
177 liters / 6.25 cu.ft.
203cc
0.46mm/n
12.1 t-m
57 grams
57
3.9mm
519.5 cm2
8.0mm
28-50 liters/ 1-1.75 cu.ft.
59.5-85 liters/ 2.1-3 cu.ft.
102.2 cu.in / 1.67 liters
12.26”, 311.4mm
11”, 279.5mm
fitted as standard
fitted as standard
0.25”, 6.4mm
11.71”, 297.5mm
5.1”, 130mm
4.3 lbs., 2 kg
6 lbs., 2.7 kg
copper voice coil
Polyimide former
neodymium magnet
non-vented core
Pressed steel basket
Polypropylene cone
santoprene cone edge
solid composition felt dust cap
acoustinator™ cx2008 acoustinator™ n2012acoustinator™ nh2008
WWW.eminence.com 35* Please see footnotes on Page 3 for information regarding nominal imPedance, Power rating and sensitivity.
legend 1028K legend 1058 legend gB128legend 1218
legend 1028K legend 1058 legend 1218 legend gB12810”, 254mm
8 ohms
35W
n/a
95hz
100hz-5.5khz
97.4
6 oz.
0.25”, 6.2mm
1”, 25.4mm
95hz
5.8
0.51mh
17.96
1.61
1.47
31.5 liters / 1.1 cu.ft.
72cc
0.19mm/n
5.7 t-m
15 grams
59
2.1mm
344.9 cm2
n/a
acceptable
acceptable
46.7 cu.in / 0.77 liters
10.11”, 256.8mm
9.05”, 229.9mm
fitted as standard
n/a
0.22”, 5.6mm
9.6”, 243.8mm
4.8”, 122mm
2.9 lbs., 1.3 kg
4 lbs., 1.8 kg
copper voice coil
Polyimide former
alnico magnet
non-vented core
Pressed steel basket
Paper cone
Paper cone edge
solid composition felt dust cap
10”, 254mm
8 or 16 ohms
75W
n/a
97hz
100hz-6khz
98.7
16 oz.
0.25”, 6.35mm
1.5”, 38.1mm
97hz
7.49
0.56mh
17.78
1.21
1.13
26.4 liters / 0.9 cu.ft.
0cc
0.16mm/n
8.0 t-m
17 grams
80
0.0mm
344.9 cm2
n/a
acceptable
acceptable
56.5 cu.in / 0.93 liters
10.11”, 256.8mm
9.13”, 231.8mm
fitted as standard
fitted as standard
0.23”, 5.7mm
9.6”, 243.8mm
4.1”, 104mm
4.4 lbs., 2 kg
5.4 lbs., 2.5 kg
copper voice coil
Polyimide former
ferrite magnet
non-vented core
Pressed steel basket
Paper cone
Paper cone edge
solid composition felt dust cap
12”, 304.8mm
8 ohms
150W
n/a
100hz
80hz-4.2khz
98.8
38 oz.
0.312”, 7.92mm
2”, 50.8mm
100hz
6.95
0.69mh
15.51
0.95
0.89
31.2 liters / 1.1 cu.ft.
41cc
0.09mm/n
11.6 t-m
29 grams
105
0.8mm
506.7 cm2
n/a
n/a
acceptable
122 cu.in / 2 liters
12.03”, 305.5mm
10.95”, 278.1mm
fitted as standard
fitted as standard
0.25”, 6.4mm
11.59”, 294.3mm
4.5”, 114mm
8.4 lbs., 3.8 kg
10.6 lbs., 4.8 kg
copper voice coil
Polyimide former
ferrite magnet
non-vented core
Pressed steel basket
Paper cone
Paper cone edge
Zurette dust cap
12”, 304.8mm
8 ohms
50W
n/a
86hz
80hz-5.1khz
101.4
38 oz.
0.312”, 7.92mm
1.75”, 44.5mm
86hz
6.37
0.64mh
19.54
0.67
0.65
43.9 liters / 1.6 cu.ft.
41cc
0.12mm/n
12.0 t-m
28 grams
128
0.8mm
506.7 cm2
n/a
acceptable
acceptable
122 cu.in / 2 liters
12.03”, 305.5mm
10.95”, 278.1mm
fitted as standard
fitted as standard
0.25”, 6.4mm
11.59”, 294.3mm
6.06”, 154mm
8.1 lbs., 3.7 kg
10.1 lbs., 4.6 kg
copper voice coil
Paper former
ferrite magnet
non-vented core
Pressed steel basket
Paper cone
Paper cone edge
Zurette dust cap
36
nominal Basket diameter
nominal impedance*
Power rating**
Watts
music Program
resonance
usable frequency range
sensitivity***
magnet Weight
gap height
voice coil diameter
resonant frequency (fs)
dc resistance (re)
coil inductance (le)
mechanical Q (Qms)
electromagnetic Q (Qes)
total Q (Qts)
compliance equivalent volume (vas)
Peak diaphragm displacement volume (vd)
mechanical compliance of suspension (cms)
Bl Product (Bl)
diaphragm mass inc. airload (mms)
efficiency Bandwidth Product (eBP)
maximum linear excursion (xmax)
surface area of cone (sd)
maximum mechanical limit (xlim)
recommended enclosure volume
sealed
vented
driver volume displaced
overall diameter
Baffle hole diameter
front sealing gasket
rear sealing gasket
mounting holes diameter
mounting holes B.c.d.
depth
net Weight
shipping Weight
coil construction
coil former
magnet composition
core details
Basket materials
cone composition
cone edge composition
dust cap composition
sPecification
thiele & small Parameters
mounting information
materials of construction
* Please see footnotes on Page 3 for information regarding nominal imPedance, Power rating and sensitivity.
legend v128 legend 1518legend 1258
legend 1258 legend 1518legend v12812”, 304.8mm
8 ohms
120W
n/a
89hz
80hz-5khz
100.9
38 oz.
0.312”, 7.92mm
1.75”, 44.5mm
89hz
6.37
0.64mh
11.98
0.83
0.77
39.4 liters / 1.4 cu.ft.
42cc
0.10mm/n
11.5 t-m
30 grams
107
0.8mm
519.5 cm2
n/a
acceptable
acceptable
122 cu.in / 2 liters
12.03”, 305.5mm
10.95”, 278.1mm
fitted as standard
n/a
0.25”, 6.4mm
11.59”, 294.3mm
6.06”, 154mm
8.1 lbs., 3.7 kg
10.1 lbs., 4.6 kg
copper voice coil
Polyimide former
ferrite magnet
non-vented core
Pressed steel basket
Paper cone
Paper cone edge
solid composition felt dust cap
12”, 304.8mm
8 ohms
75W
n/a
94hz
80hz-4khz
100.1
34 oz.
0.312”, 7.92mm
1.5”, 38.1mm
94hz
7.44
0.70mh
6.15
1.18
0.99
32.5 liters / 1.2 cu.ft.
24cc
0.09mm/n
10.9 t-m
32 grams
80
0.5mm
506.7 cm2
n/a
n/a
acceptable
119.9 cu.in / 1.96 liters
12.03”, 305.5mm
10.95”, 278.1mm
fitted as standard
fitted as standard
0.25”, 6.4mm
11.59”, 294.3mm
4.9”, 125mm
7.8 lbs., 3.5 kg
9.9 lbs., 4.5 kg
copper voice coil
Polyimide former
ferrite magnet
non-vented core
Pressed steel basket
Paper cone
Paper cone edge
solid composition paper dust cap
15”, 381mm
8 ohms
150W
n/a
82hz
60hz-4khz
102.2
59 oz.
0.312”, 7.92mm
2”, 50.8mm
82hz
7.16
0.86mh
10.12
1.02
0.93
65.4 liters / 2.3 cu.ft.
66cc
0.07mm/n
14.1 t-m
55 grams
80
0.8mm
823.7 cm2
n/a
n/a
acceptable
220.8 cu.in / 3.62 liters
15.15”, 384.8mm
13.77”, 349.6mm
fitted as standard
n/a
0.25”, 6.4mm
14.56”, 369.9mm
6.1”, 155mm
12.1 lbs., 5.5 kg
14.1 lbs., 6.4 kg
copper voice coil
Polyimide former
ferrite magnet
non-vented core
Pressed steel basket
Paper cone
Paper cone edge
Zurette dust cap
WWW.eminence.com
ragin caJun™
ragin caJun™10”, 254mm
8 ohms
75W
n/a
84hz
70hz-5khz
100
30 oz.
0.312”, 7.92mm
1.5”, 38.1mm
84hz
7.3
0.39mh
10.8
0.68
0.64
34.1 liters / 1.2 cu.ft.
18cc
0.18mm/n
11.5 t-m
20 grams
156
0.5mm
366.1 cm2
n/a
acceptable
acceptable
66.9 cu.in / 1.1 liters
10.11”, 256.8mm
9.13”, 231.8mm
fitted as standard
fitted as standard
0.23”, 5.7mm
9.6”, 243.8mm
4.3”, 109mm
6.4 lbs., 2.9 kg
8.2 lbs., 3.7 kg
copper voice coil
Polyimide former
ferrite magnet
non-vented core
Pressed steel basket
Paper cone
Paper cone edge
Zurette dust cap
37* Please see footnotes on Page 3 for information regarding nominal imPedance, Power rating and sensitivity.
the coPPerhead™ lil’ Buddy™delta demon™
the coPPerhead™10”, 254mm
8 ohms
75W
n/a
105hz
70hz-5khz
99
20 oz.
0.312”, 7.92mm
1.5”, 38.1mm
105hz
7.59
0.37mh
13.27
1.05
0.98
27.0 liters / 1.0 cu.ft.
0cc
0.14mm/n
8.8 t-m
16 grams
100
0.0mm
366.1 cm2
n/a
acceptable
acceptable
58.1 cu.in / 0.95 liters
10.11”, 256.8mm
9.13”, 231.8mm
fitted as standard
fitted as standard
0.23”, 5.7mm
9.6”, 243.8mm
4.2”, 107mm
4.5 lbs., 2 kg
6.4 lbs., 2.9 kg
copper voice coil
Polyimide former
ferrite magnet
non-vented core
Pressed steel basket
Paper cone
Paper cone edge
Zurette dust cap
delta demon™10”, 254mm
8 ohms
100W
n/a
76hz
80hz-3khz
96.9
30 oz.
0.312”, 7.92mm
2”, 50.8mm
76hz
6.9
0.66mh
15.06
0.53
0.51
41.1 liters / 1.5 cu.ft.
88cc
0.22mm/n
11.3 t-m
21 grams
143
2.4mm
366.1 cm2
n/a
acceptable
n/a
66.9 cu.in / 1.1 liters
10.09”, 256.2mm
9.05”, 229.7mm
fitted as standard
fitted as standard
0.25”, 6.4mm
9.66”, 245.4mm
3.8”, 97mm
6.8 lbs., 3.1 kg
8.5 lbs., 3.9 kg
copper voice coil
Polyimide former
ferrite magnet
vented core
Pressed steel basket
Paper cone
Paper cone edge
solid composition paper dust cap
lil’ Buddy™10”, 254mm
8 ohms
50W
n/a
149hz
80hz-5khz
99.1
30 oz.
0.312”, 7.92mm
1.75”, 44.5mm
149hz
6.31
0.46mh
9.06
0.93
0.84
10 liters / 0.35 cu.ft.
29cc
0.05mm/n
11.7 t-m
22 grams
160
0.8mm
366.1 cm2
n/a
n/a
acceptable
66.9 cu.in / 1.1 liters
10.11”, 256.8mm
9.13”, 231.8mm
fitted as standard
fitted as standard
0.23”, 5.7mm
9.6”, 243.8mm
4.3”, 109mm
6.3 lbs., 2.9 kg
7.4 lbs., 3.4 kg
copper voice coil
Paper former
ferrite magnet
non-vented core
Pressed steel basket
hemp cone ™
Paper cone edge
Zurette dust cap
nominal Basket diameter
nominal impedance*
Power rating**
Watts
music Program
resonance
usable frequency range
sensitivity***
magnet Weight
gap height
voice coil diameter
resonant frequency (fs)
dc resistance (re)
coil inductance (le)
mechanical Q (Qms)
electromagnetic Q (Qes)
total Q (Qts)
compliance equivalent volume (vas)
Peak diaphragm displacement volume (vd)
mechanical compliance of suspension (cms)
Bl Product (Bl)
diaphragm mass inc. airload (mms)
efficiency Bandwidth Product (eBP)
maximum linear excursion (xmax)
surface area of cone (sd)
maximum mechanical limit (xlim)
recommended enclosure volume
sealed
vented
driver volume displaced
overall diameter
Baffle hole diameter
front sealing gasket
rear sealing gasket
mounting holes diameter
mounting holes B.c.d.
depth
net Weight
shipping Weight
coil construction
coil former
magnet composition
core details
Basket materials
cone composition
cone edge composition
dust cap composition
sPecification
thiele & small Parameters
mounting information
materials of construction
38 * Please see footnotes on Page 3 for information regarding nominal imPedance, Power rating and sensitivity.
canis maJor™BlacK PoWder™BlacK mountain™
BlacK mountain™ BlacK PoWder™ canis maJor™12”, 304.8mm
8 ohms
30W
n/a
69hz
70hz-5.5khz
101.3
35 oz.
0.312”, 7.94mm
1.75”, 44.45mm
68.58hz
6.44
.62 mh
8.13
0.53
0.50
69.64 liters / 2.46 cu.ft.
40cc
0.19 mm/n
12.07 t-m
27.8 grams
129.2
0.8mm
506.7 cm2
n/a
acceptable
n/a
136.7 cu.in / 2.24 liters
12.26”, 311.4mm
11.06”, 280.9mm
fitted as standard
fitted as standard
0.25”, 6.4mm
11.71”, 297.4mm
5.95”, 151.1mm
8.9 lbs, 4.04 kg
11.1 lbs, 5 kg
copper voice coil
Paper former
alnico magnet
non-vented core
Pressed steel basket
seamed Paper cone
Paper cone edge
treated paper dust cap
12”, 304.8mm
8 ohms
75W
n/a
72hz
70hz-5khz
100
30 oz.
0.312”, 7.92mm
1.5”, 38.1mm
72hz
7.1
0.37mh
14.98
0.75
0.72
82.4 liters / 2.9 cu.ft.
25cc
0.22mm/n
9.9 t-m
23 grams
96
0.5mm
519.5 cm2
n/a
n/a
acceptable
117.7 cu.in / 1.93 liters
12.23”, 310.5mm
11.02”, 279.8mm
fitted as standard
fitted as standard
0.25”, 6.4mm
11.67”, 296.4mm
4.6”, 117mm
7 lbs., 3.2 kg
9 lbs., 4.1 kg
copper voice coil
Polyimide former
ferrite magnet
non-vented core
Pressed steel basket
Paper cone
Paper cone edge
Zurette dust cap
12”, 305mm
8 ohms
50W
n/a
105hz
70hz-4khz
102
35 oz.
0.312”, 7.92mm
1.75”, 44.5mm
104.86hz
6.45
0.61mh
10.16
0.71
0.66
34.08 liters / 1.2 cu.ft.
42cc
0.09mm/n
12.6 t-m
26.6 grams
147.6
0.8mm
532.4 cm2
n/a
acceptable
acceptable
136.7 cu.in / 2.24 liters
12.02”, 305.3mm
10.97”, 278.6mm
fitted as standard
fitted as standard
0.25”, 6.4mm
11.63”, 295.4mm
6.2”. 157.5mm
9.3 lbs., 4.2 kg
10.2 lbs., 4.63 kg
copper voice coil
Paper former
alnico magnet
non-vented core
Pressed steel basket
hemp cone ™
Paper cone edge
Zurette dust cap
WWW.eminence.com
lil’ texas™
lil’ texas™12”, 304.8mm
8 or 16 ohms
125W
n/a
90hz
70hz-5.5khz
101
4 oz.
0.28”, 7.2mm
2”, 50.8mm
90hz
7.2
0.42mh
11.29
0.69
0.65
43 liters / 1.53 cu.ft.
66cc
0.11mm/n
12.8 t-m
28 grams
130
1.3mm
519.5 cm2
n/a
acceptable
acceptable
102.2 cu.in / 1.67 liters
12.03”, 305.5mm
10.95”, 278.1mm
fitted as standard
fitted as standard
0.25”, 6.4mm
11.59”, 294.3mm
5.07”, 129mm
4.1 lbs., 1.9 kg
5.8 lbs., 2.6 kg
copper voice coil
Polyimide former
neodymium magnet
non-vented core
Pressed steel basket
Paper cone
Paper cone edge
Zurette dust cap
39* Please see footnotes on Page 3 for information regarding nominal imPedance, Power rating and sensitivity.
cannaBis rex™ commonWealth™ 12
cannaBis rex™12”, 304.8mm
8 or 16 ohms
50W
n/a
96hz
70hz-5khz
102
38 oz.
0.312”, 7.92mm
1.75”, 44.5mm
96hz
6.56
0.44mh
9.28
0.69
0.64
50 liters / 1.8 cu.ft.
45cc
0.11mm/n
11.8 t-m
24 grams
139
0.8mm
558.6 cm2
n/a
acceptable
acceptable
122 cu.in / 2 liters
12.02”, 305.3mm
10.97”, 278.6mm
fitted as standard
fitted as standard
0.25”, 6.4mm
11.63”, 295.4mm
5.1”, 130mm
8.2 lbs., 3.7 kg
9.8 lbs., 4.5 kg
copper voice coil
Paper former
ferrite magnet
non-vented core
Pressed steel basket
hemp cone ™
Paper cone edge
Zurette dust cap
commonWealth™ 1212”, 304.8mm
8 ohms
225W
n/a
50hz
50hz-4khz
100
109 oz.
0.29”, 7.2mm
4”, 101.6mm
50hz
6.34
0.46mh
6.61
0.35
0.33
90 liters / 3.2 cu.ft.
36cc
0.24mm/n
15.7 t-m
43 grams
143
0.7mm
519.5 cm2
n/a
acceptable
acceptable
179.3 cu.in / 2.94 liters
12.28”, 312.0mm
11.08”, 281.3mm
fitted as standard
n/a
0.27”, 6.8mm
11.69”, 297.0mm
5”, 127mm
21.5 lbs., 9.8 kg
23.2 lbs., 10.5 kg
aluminum voice coil
Polyimide former
ferrite magnet
vented core
die-cast aluminum basket
Paper cone
cloth cone edge
aluminum dust cap
nominal Basket diameter
nominal impedance*
Power rating**
Watts
music Program
resonance
usable frequency range
sensitivity***
magnet Weight
gap height
voice coil diameter
resonant frequency (fs)
dc resistance (re)
coil inductance (le)
mechanical Q (Qms)
electromagnetic Q (Qes)
total Q (Qts)
compliance equivalent volume (vas)
Peak diaphragm displacement volume (vd)
mechanical compliance of suspension (cms)
Bl Product (Bl)
diaphragm mass inc. airload (mms)
efficiency Bandwidth Product (eBP)
maximum linear excursion (xmax)
surface area of cone (sd)
maximum mechanical limit (xlim)
recommended enclosure volume
sealed
vented
driver volume displaced
overall diameter
Baffle hole diameter
front sealing gasket
rear sealing gasket
mounting holes diameter
mounting holes B.c.d.
depth
net Weight
shipping Weight
coil construction
coil former
magnet composition
core details
Basket materials
cone composition
cone edge composition
dust cap composition
sPecification
thiele & small Parameters
mounting information
materials of construction
40 * Please see footnotes on Page 3 for information regarding nominal imPedance, Power rating and sensitivity.
red White and Blues™mavericK™ screamin eagle™
red White and Blues™ screamin eagle™mavericK™12”, 304.8mm
8 ohms
75W
n/a
82.45 hz
75 hz - 5.2 khz
max attenuation: 91.5 dB full output: 100 dB
38 oz
7.92 mm
1.75”, 44.5 mm
n/a
acceptable
134.25 cu.in., 2.2 liters
12.03”, 305.5 mm
10.95”, 278.1 mm
yes
yes
0.25”, 6.4 mm
11.59”, 294.3 mm
6.562”, 166.6 mm
7.8 lbs., 3.54 kg
9.7 lbs., 4.39 kg
max attenuation
82.6 hz
5.96
0.38 mh
16.26
6.16
4.47
48.71 liters
24.42 cc
0.13 mm/n
3.76 t-m
28.2 grams
13.4
.047 mm
519.5 cm2
n/a
full outPut
82.45 hz
5.99
0.48 mh
16.77
1.17
1.09
48.71 liters
24.42 cc
0.13 mm/n
8.71 t-m
28.5 grams
70.73
0.47 mm
519.5 cm2
n/a
copper voice coil
Polyimide former
ferrite magnet
fdm™ technology
Pressed steel basket
full molded paper cone
Paper cone edge
Zurette dust cap
12”, 304.8mm
8 ohms
120W
n/a
110hz
70hz-4.5khz
101
38 oz.
0.312”, 7.92mm
1.75”, 44.5mm
110hz
6.42
0.43mh
7.19
0.89
0.79
30.8 liters / 1.1 cu.ft.
45cc
0.07mm/n
12.3 t-m
30 grams
124
0.8mm
558.6 cm2
n/a
acceptable
acceptable
122 cu.in / 2 liters
12.02”, 305.3mm
10.97”, 278.6mm
fitted as standard
fitted as standard
0.25”, 6.4mm
11.63”, 295.4mm
5.1”, 130mm
8.2 lbs., 3.7 kg
10.1 lbs., 4.6 kg
copper voice coil
Polyimide former
ferrite magnet
non-vented core
Pressed steel basket
Paper cone
Paper cone edge
Zurette dust cap
12”, 304.8mm
8 or 16 ohms
50W
n/a
79hz
65hz-5.5khz
101
38 oz.
0.312”, 7.92mm
1.75”, 44.5mm
79hz
6.84
0.48mh
15.95
0.60
0.58
51.5 liters / 1.8 cu.ft.
64cc
0.13mm/n
13.1 t-m
30 grams
132
1.2mm
519.5 cm2
n/a
acceptable
acceptable
122 cu.in / 2 liters
12.02”, 305.3mm
10.97”, 278.6mm
fitted as standard
fitted as standard
0.25”, 6.4mm
11.63”, 295.4mm
5.1”, 130mm
8.3 lbs., 3.8 kg
10 lbs., 4.5 kg
copper voice coil
Paper former
ferrite magnet
non-vented core
Pressed steel basket
Paper cone
Paper cone edge
Zurette dust cap
WWW.eminence.com 41* Please see footnotes on Page 3 for information regarding nominal imPedance, Power rating and sensitivity.
sWamP thang™ commonWealth™ 15texas heat™
commonWealth™ 15sWamP thang™ texas heat™12”, 304.8mm
8 or 16 ohms
150W
n/a
97hz
70hz-5khz
102
59 oz.
0.312”, 7.92mm
2”, 50.8mm
97hz
6.92
0.42mh
14.43
0.55
0.53
41.3 liters / 1.5 cu.ft.
43cc
0.10mm/n
14.2 t-m
26 grams
177
0.8mm
532.4 cm2
n/a
acceptable
acceptable
137.3 cu.in / 2.25 liters
12.01”, 305.1mm
10.95”, 278.1mm
fitted as standard
fitted as standard
0.25”, 6.4mm
11.63”, 295.4mm
5.2”, 132mm
11.1 lbs., 5 kg
12.8 lbs., 5.8 kg
copper voice coil
Polyimide former
ferrite magnet
non-vented core
Pressed steel basket
Paper cone
Paper cone edge
Zurette dust cap
12”, 304.8mm
8, 4 or 16 ohms
150W
n/a
79hz
70hz-5khz
99
38 oz.
0.312”, 7.92mm
2”, 50.8mm
79hz
7.3
0.54mh
13.88
0.68
0.65
50.9 liters / 1.8 cu.ft.
42cc
0.13mm/n
12.8 t-m
31 grams
116
0.8mm
519.5 cm2
n/a
acceptable
acceptable
122 cu.in / 2 liters
12.02”, 305.3mm
10.97”, 278.6mm
fitted as standard
fitted as standard
0.25”, 6.4mm
11.63”, 295.4mm
5.1”, 130mm
8.3 lbs., 3.8 kg
10 lbs., 4.5 kg
copper voice coil
Polyimide former
ferrite magnet
non-vented core
Pressed steel basket
Paper cone
Paper cone edge
Zurette dust cap
15”, 381mm
4 ohms
225W
n/a
52hz
50hz-4khz
100.8
109 oz.
0.29”, 7.2mm
4”, 101.6mm
52hz
3.72
0.22mh
6.75
0.57
0.53
163 liters / 5.8 cu.ft.
29cc
0.15mm/n
11.8 t-m
65 grams
91
0.3mm
889.6 cm2
n/a
acceptable
acceptable
262.8 cu.in / 4.31 liters
15.28”, 388.0mm
14.06”, 357.0mm
fitted as standard
n/a
0.26”, 6.5mm
14.57”, 370.0mm
6”, 152mm
22.6 lbs., 10.3 kg
24.8 lbs., 11.3 kg
aluminum voice coil
Polyimide former
ferrite magnet
vented core
die-cast aluminum basket
Paper cone
cloth cone edge
aluminum dust cap
nominal Basket diameter
nominal impedance*
Power rating**
Watts
music Program
resonance
usable frequency range
sensitivity***
magnet Weight
gap height
voice coil diameter
resonant frequency (fs)
dc resistance (re)
coil inductance (le)
mechanical Q (Qms)
electromagnetic Q (Qes)
total Q (Qts)
compliance equivalent volume (vas)
Peak diaphragm displacement volume (vd)
mechanical compliance of suspension (cms)
Bl Product (Bl)
diaphragm mass inc. airload (mms)
efficiency Bandwidth Product (eBP)
maximum linear excursion (xmax)
surface area of cone (sd)
maximum mechanical limit (xlim)
recommended enclosure volume
sealed
vented
driver volume displaced
overall diameter
Baffle hole diameter
front sealing gasket
rear sealing gasket
mounting holes diameter
mounting holes B.c.d.
depth
net Weight
shipping Weight
coil construction
coil former
magnet composition
core details
Basket materials
cone composition
cone edge composition
dust cap composition
sPecification
thiele & small Parameters
mounting information
materials of construction
42 * Please see footnotes on Page 3 for information regarding nominal imPedance, Power rating and sensitivity.
red fang™ 10ramrod™ the governor™
ramrod™ red fang™ 10 the governor™10”, 254mm
8 ohms
75W
n/a
101hz
80hz-5khz
100
30 oz.
0.312”, 7.92mm
1.5”, 38.1mm
101hz
7.3
0.39mh
10.80
0.68
0.64
24.6 liters / 0.9 cu.ft.
18cc
0.13mm/n
11.5 t-m
19 grams
149
0.5mm
366.1 cm2
n/a
acceptable
acceptable
66.9 cu.in / 1.1 liters
10.11”, 256.8mm
9.13”, 231.8mm
fitted as standard
fitted as standard
0.23”, 5.7mm
9.6”, 243.8mm
4.3”, 109mm
5.4 lbs., 2.5 kg
8.3 lbs., 3.8 kg
copper voice coil
Polyimide former
ferrite magnet
non-vented core
Pressed steel basket
Paper cone
Paper cone edge
Zurette dust cap
10’’, 254mm
8 ohms
50W
n/a
111hz
70hz-4.5khz
102
35 oz.
0.312’’, 7.92mm
1.75’’, 44.5mm
111hz
5.8
0.55mh
12.64
0.50
0.48
21.3 liters/.75 cu.ft.
17cc
0.11mm/n
12.1 t-m
18 grams
223
0.47mm
366.1 cm2
n/a
acceptable
acceptable
86 cu.in / 1.41 liters
10.11’’, 256.8mm
9.13’’, 231.9mm
fitted as standard
fitted as standard
0.23’’, 5.8mm
9.6’’, 243.8mm
5.2’’, 132mm
7.7 lbs., 3.5 kg
8.5 lbs., 3.9 kg
copper voice coil
nomex former
alnico magnet
non-vented core
Pressed steel basket
Paper cone
Paper cone edge
Zurette dust cap
12”, 304.8mm
8 or 16 ohms
75W
n/a
101hz
70hz-5khz
102
56 oz.
0.312”, 7.92mm
1.75”, 44.5mm
101hz
6.81
0.41mh
11.41
0.59
0.56
30.1 liters / 1.1 cu.ft.
64cc
0.08mm/n
15.3 t-m
32 grams
171
1.2mm
519.5 cm2
n/a
acceptable
acceptable
137.3 cu.in / 2.25 liters
12.02”, 305.3mm
10.97”, 278.6mm
fitted as standard
fitted as standard
0.25”, 6.4mm
11.63”, 295.4mm
5.2”, 132mm
10.8 lbs., 4.9 kg
12.6 lbs., 5.7 kg
copper voice coil
nomex former
ferrite magnet
non-vented core
Pressed steel basket
Paper cone
Paper cone edge
Zurette dust cap
WWW.eminence.com 43* Please see footnotes on Page 3 for information regarding nominal imPedance, Power rating and sensitivity.
Private JacK™ reignmaKer™man o War™
man o War™ Private JacK™ reignmaKer™12”, 304.8mm
8 ohms
75W
n/a
91.0 hz
80 hz - 6.2 khz
max attenuation: 91.5 dB full output: 100 dB
38 oz
7.92 mm
1.75”, 44.5 mm
n/a
acceptable
134.25 cu.in., 2.2 liters
12.03”, 305.5 mm
10.95”, 278.1 mm
yes
yes
0.25”, 6.4 mm
11.59”, 294.3 mm
6.562”, 166.6 mm
7.8 lbs., 3.54 kg
9.7 lbs., 4.39 kg
full outPut
91.00 hz
5.98
0.50 mh
20.19
1.37
1.29
37.47 liters
24.42 cc
0.10 mm/n
8.74 t-m
30.65 grams
66.31
0.47 mm
519.5 cm2
n/a
copper voice coil
Polyimide former
ferrite magnet
fdm™ technology
Pressed steel basket
full molded paper cone
Paper cone edge
Zurette dust cap
max attenuation
91.25 hz
5.94
0.44 mh
16.82
7.84
5.35
37.47 liters
24.42 cc
0.10 mm/n
3.62 t-m
30.15 grams
11.65
0.47 mm
519.5 cm2
n/a
12”, 304.8mm
8 or 16 ohms
120W
n/a
91hz
70hz-5.5khz
102
38 oz.
0.312”, 7.92mm
1.75”, 44.5mm
91hz
6.2
0.43mh
11.66
0.72
0.68
38.0 liters / 1.3 cu.ft.
42cc
0.10mm/n
12.3 t-m
31 grams
127
0.8mm
519.5 cm2
n/a
acceptable
acceptable
122 cu.in / 2 liters
12.02”, 305.3mm
10.97”, 278.6mm
fitted as standard
fitted as standard
0.25”, 6.4mm
11.63”, 295.4mm
5.2”, 132mm
8.1 lbs., 3.7 kg
9.9 lbs., 4.5 kg
copper voice coil
Polyimide former
ferrite magnet
non-vented core
Pressed steel basket
Paper cone
Paper cone edge
Zurette dust cap
12”, 304.8mm
8 or 16 ohms
50W
n/a
96hz
70hz-5khz
101
38 oz.
0.312”, 7.92mm
1.75”, 44.5mm
96hz
7.01
0.49mh
18.19
0.72
0.69
33.7 liters / 1.2 cu.ft.
64cc
0.09mm/n
13.5 t-m
31 grams
134
1.2mm
519.5 cm2
n/a
acceptable
acceptable
122 cu.in / 2 liters
12.02”, 305.3mm
10.97”, 278.6mm
fitted as standard
fitted as standard
0.25”, 6.4mm
11.63”, 295.4mm
5.1”, 130mm
8 lbs., 3.6 kg
9.8 lbs., 4.5 kg
copper voice coil
Paper former
ferrite magnet
non-vented core
Pressed steel basket
Paper cone
Paper cone edge
Zurette dust cap
nominal Basket diameter
nominal impedance*
Power rating**
Watts
music Program
resonance
usable frequency range
sensitivity***
magnet Weight
gap height
voice coil diameter
resonant frequency (fs)
dc resistance (re)
coil inductance (le)
mechanical Q (Qms)
electromagnetic Q (Qes)
total Q (Qts)
compliance equivalent volume (vas)
Peak diaphragm displacement volume (vd)
mechanical compliance of suspension (cms)
Bl Product (Bl)
diaphragm mass inc. airload (mms)
efficiency Bandwidth Product (eBP)
maximum linear excursion (xmax)
surface area of cone (sd)
maximum mechanical limit (xlim)
recommended enclosure volume
sealed
vented
driver volume displaced
overall diameter
Baffle hole diameter
front sealing gasket
rear sealing gasket
mounting holes diameter
mounting holes B.c.d.
depth
net Weight
shipping Weight
coil construction
coil former
magnet composition
core details
Basket materials
cone composition
cone edge composition
dust cap composition
sPecification
thiele & small Parameters
mounting information
materials of construction
44 * Please see footnotes on Page 3 for information regarding nominal imPedance, Power rating and sensitivity.
the tonKer™the tonesPotter™red fang™
red fang™ the tonesPotter™ the tonKer™12”, 304.8mm
8 or 16 ohms
50W
n/a
97hz
70hz-5.5khz
103
35 oz.
0.312”, 7.92mm
1.75”, 44.5mm
97hz
5.72
0.39mh
13.39
0.74
0.70
39.4 liters / 1.4 cu.ft.
25cc
0.10mm/n
11.1 t-m
26 grams
131
0.5mm
519.5 cm2
n/a
acceptable
acceptable
136.7 cu.in / 2.24 liters
12.02”, 305.3mm
10.97”, 278.6mm
fitted as standard
fitted as standard
0.25”, 6.4mm
11.63”, 295.4mm
6.2”, 158mm
9.3 lbs., 4.2 kg
11.1 lbs., 5 kg
copper voice coil
nomex former
alnico magnet
non-vented core
Pressed steel basket
Paper cone
Paper cone edge
Zurette dust cap
12”, 304.8mm
8 ohms
75W
n/a
88hz
70hz-5.5khz
100.7
38 oz.
0.312”, 7.92mm
1.75”, 44.5mm
88hz
6.76
0.47mh
10.04
0.73
0.68
39.7 liters / 1.4 cu.ft.
64cc
0.10mm/n
12.7 t-m
32 grams
120
1.2mm
519.5 cm2
n/a
acceptable
acceptable
122 cu.in / 2 liters
12.02”, 305.3mm
10.97”, 278.6mm
fitted as standard
fitted as standard
0.25”, 6.4mm
11.63”, 295.4mm
5.1”, 130mm
8 lbs., 3.6 kg
9.8 lbs., 4.5 kg
copper voice coil
Paper former
ferrite magnet
non-vented core
Pressed steel basket
Paper cone
Paper cone edge
Zurette dust cap
12”, 304.8mm
8 or 16 ohms
150W
n/a
89hz
70hz-5.5khz
102
59 oz.
0.312”, 7.92mm
2”, 50.8mm
89hz
7.36
0.47mh
10.02
0.49
0.47
34.1 liters / 1.2 cu.ft.
42cc
0.09mm/n
17.4 t-m
36 grams
181
0.8mm
519.5 cm2
n/a
acceptable
acceptable
137.3 cu.in / 2.25 liters
12.02”, 305.3mm
10.97”, 278.6mm
fitted as standard
fitted as standard
0.25”, 6.4mm
11.63”, 295.4mm
5.2”, 132mm
11.1 lbs., 5 kg
13.2 lbs., 6 kg
copper voice coil
Polyimide former
ferrite magnet
non-vented core
Pressed steel basket
Paper cone
Paper cone edge
Zurette dust cap
WWW.eminence.com 45* Please see footnotes on Page 3 for information regarding nominal imPedance, Power rating and sensitivity.
the WiZard™ tonKerlite™ Big Ben
Big Benthe WiZard™ tonKerlite™12”, 304.8mm
8 or 16 ohms
75W
n/a
89hz
70hz-5.5khz
103
56 oz.
0.312”, 7.92mm
1.75”, 44.5mm
89hz
6.13
0.38mh
11.48
0.49
0.47
41.5 liters / 1.5 cu.ft.
42cc
0.11mm/n
14.4 t-m
30 grams
181
0.8mm
519.5 cm2
n/a
acceptable
n/a
137.3 cu.in / 2.25 liters
12.02”, 305.3mm
10.97”, 278.6mm
fitted as standard
fitted as standard
0.25”, 6.4mm
11.63”, 295.4mm
5.2”, 132mm
10.8 lbs., 4.9 kg
12.5 lbs., 5.7 kg
copper voice coil
nomex former
ferrite magnet
non-vented core
Pressed steel basket
Paper cone
Paper cone edge
Zurette dust cap
12”, 304.8mm
8 or 16 ohms
125W
n/a
109hz
70hz-5.5khz
101
4 oz.
0.28”, 7.2mm
2”, 50.8mm
109hz
7.2
0.42mh
12.58
0.85
0.8
27.4 liters / 1.0 cu.ft.
61cc
0.07mm/n
13.1 t-m
30 grams
129
1.2mm
519.5 cm2
n/a
acceptable
acceptable
102.2 cu.in / 1.67 liters
12.02”, 305.3mm
10.97”, 278.6mm
fitted as standard
fitted as standard
0.25”, 6.4mm
11.63”, 295.4mm
5.1”, 129mm
4.1 lbs., 1.9 kg
5.8 lbs., 2.6 kg
copper voice coil
Polyimide former
neodymium magnet
non-vented core
Pressed steel basket
Paper cone
Paper cone edge
Zurette dust cap
15”, 381mm
8 ohms
225W
n/a
85hz
70hz-3.5khz
101.5
56 oz.
0.375”, 9.53mm
2.5”, 63.5mm
85hz
6.06
0.51mh
10.63
1.04
0.94
77.7 liters / 2.74 cu.ft.
0cc
0.08mm/n
12.1 t-m
47 grams
82
0.0mm
856.3 cm2
n/a
n/a
acceptable
220.8 cu.in / 3.62 liters
15.13”, 384.2mm
13.8”, 350.5mm
fitted as standard
fitted as standard
0.25”, 6.4mm
14.56”, 369.9mm
6.1”, 155mm
12.6 lbs., 5.7 kg
14.9 lbs., 6.8 kg
copper voice coil
Polyimide former
ferrite magnet
non-vented core
Pressed steel basket
Paper cone
Paper cone edge
Zurette dust cap
look inside most any professional or name brand bass amplifier or enclosure and you’re going to find custom designed, eminence bass guitar speakers. No other speaker manufacturer has a better understanding of bass guitar enclosures and the physics of the woofers required to hold your back line together.
Whether you’re packing a 20lb. practice amp or a 150lb. 8x10 seismic generator, you’ve chosen your rig to cut through the mix with your signature sound.
Maybe you want fast, tight, and articulate, or perhaps you need a fat, round, and warm tone. Maybe you need a speaker that gives you the best of both worlds. You might be playing the CMA awards, have 4 roadies and care less how much your gear weighs, or perhaps your humping yourself to a club in Manhattan via public transportation and can’t carry another pound. No matter your circumstances, there’s no reason to compromise on your tone!
Bass guitar
Pa & musician sPeaKer comPonents
a Premier eminence stocKing distriButor
tel: 1-877-732-5374 | WWW.ussPeaKer.com
The world’s best bass gear manufacturers can’t be wrong, and neither should you. Whether you need to replace a single speaker or want to completely re-vamp your entire rig, let the bass experts at Eminence give you a hand. We’re here to help! 502.845.5622 or [email protected].
With a seven-year warranty inside the continental United States, Made in the USA, and offered at prices for the working musician, it’s never been easier to put your rig on the richter scale.
WWW.eminence.com
nominal Basket diameter
nominal impedance*
Power rating**
Watts
music Program
resonance
usable frequency range
sensitivity***
magnet Weight
gap height
voice coil diameter
resonant frequency (fs)
dc resistance (re)
coil inductance (le)
mechanical Q (Qms)
electromagnetic Q (Qes)
total Q (Qts)
compliance equivalent volume (vas)
Peak diaphragm displacement volume (vd)
mechanical compliance of suspension (cms)
Bl Product (Bl)
diaphragm mass inc. airload (mms)
efficiency Bandwidth Product (eBP)
maximum linear excursion (xmax)
surface area of cone (sd)
maximum mechanical limit (xlim)
recommended enclosure volume
sealed
vented
driver volume displaced
overall diameter
Baffle hole diameter
front sealing gasket
rear sealing gasket
mounting holes diameter
mounting holes B.c.d.
depth
net Weight
shipping Weight
coil construction
coil former
magnet composition
core details
Basket materials
cone composition
cone edge composition
dust cap composition
sPecification
thiele & small Parameters
mounting information
materials of construction
47* Please see footnotes on Page 3 for information regarding nominal imPedance, Power rating and sensitivity.
Basslite® ca2010 Basslite® ch2010 Basslite® s2010
Basslite® ca2010 Basslite® ch2010 Basslite® s201010”, 254mm
8 ohms
150W
300W
51hz
48hz-7khz
93.5
4 oz.
0.28”, 7.2mm
2”, 50.8mm
51hz
5.46
0.55mh
17.5
0.52
0.51
49 liters / 1.7 cu.ft.
126cc
0.27mm/n
11.2 t-m
37 grams
98
3.5mm
360.7 cm2
7.0mm
17-23 liters/ 0.6-0.8 cu.ft.
23-54 liters/ 0.8-1.9 cu.ft.
48.5 cu.in / 0.79 liters
10.25”, 260.4mm
9.13”, 231.9mm
fitted as standard
fitted as standard
0.28”, 7.0mm
9.73”, 247.1mm
4.75”, 121mm
3.6 lbs.,1.6 kg
4.7 lbs., 2.1 kg
copper voice coil
Polyimide former
neodymium magnet
non-vented core
die-cast aluminum basket
aluminum alloy cone
cloth cone edge
solid composition felt dust cap
10”, 254mm
8 ohms
150W
300W
58hz
54hz-3khz
96.7
4 oz.
0.28”, 7.2mm
2”, 50.8mm
58hz
5.37
0.52mh
6.5
0.47
0.44
43 liters / 1.5 cu.ft.
120cc
0.26mm/n
11.1 t-m
30 grams
123
3.5mm
344.9 cm2
7.5mm
n/a
17-51 liters/ 0.6-1.8 cu.ft.
48.5 cu.in / 0.79 liters
10.25”, 260.4mm
9.13”, 231.9mm
fitted as standard
fitted as standard
0.28”, 7.0mm
9.73”, 247.1mm
4.75”, 121mm
3.6 lbs.,1.6 kg
4.7 lbs., 2.1 kg
copper voice coil
Polyimide former
neodymium magnet
non-vented core
die-cast aluminum basket
hemp cone ô
cloth cone edge
Zurette dust cap
10”, 254mm
8 ohms
150W
300W
46hz
54hz-4khz
96.2
4 oz.
0.28”, 7.2mm
2”, 50.8mm
46hz
5.02
0.47mh
4.16
0.34
0.31
63.4 liters / 2.2 cu.ft.
140cc
0.36mm/n
11.9 t-m
33 grams
135
4.0mm
350.1 cm2
8.0mm
n/a
20-51 liters/ 0.7-1.8 cu.ft.
51.4 cu.in / 0.84 liters
10.08”, 256mm
9.05”, 229.9mm
fitted as standard
n/a
0.25”, 6.4mm
9.66”, 245.4mm
4.25”, 108mm
3.5 lbs., 1.6 kg
4.6 lbs., 2.1 kg
copper voice coil
Polyimide former
neodymium magnet
non-vented core
Pressed steel basket
Paper cone
cloth cone edge
solid composition felt dust cap
48
nominal Basket diameter
nominal impedance*
Power rating**
Watts
music Program
resonance
usable frequency range
sensitivity***
magnet Weight
gap height
voice coil diameter
resonant frequency (fs)
dc resistance (re)
coil inductance (le)
mechanical Q (Qms)
electromagnetic Q (Qes)
total Q (Qts)
compliance equivalent volume (vas)
Peak diaphragm displacement volume (vd)
mechanical compliance of suspension (cms)
Bl Product (Bl)
diaphragm mass inc. airload (mms)
efficiency Bandwidth Product (eBP)
maximum linear excursion (xmax)
surface area of cone (sd)
maximum mechanical limit (xlim)
recommended enclosure volume
sealed
vented
driver volume displaced
overall diameter
Baffle hole diameter
front sealing gasket
rear sealing gasket
mounting holes diameter
mounting holes B.c.d.
depth
net Weight
shipping Weight
coil construction
coil former
magnet composition
core details
Basket materials
cone composition
cone edge composition
dust cap composition
sPecification
thiele & small Parameters
mounting information
materials of construction
Bass guitar
* Please see footnotes on Page 3 for information regarding nominal imPedance, Power rating and sensitivity.
legend BP102 legend B810legend B102
10”, 254mm
8 ohms
200W
400W
48hz
44hz-4khz
93
45 oz.
0.312”, 7.92mm
2”, 50.8mm
48hz
6.89
0.67mh
5.31
0.42
0.39
65 liters / 2.3 cu.ft.
104cc
0.40mm/n
11.8 t-m
28 grams
113
3.0mm
344.9 cm2
8.0mm
n/a
18-85 liters/0.63-3 cu.ft.
81.1 cu.in / 1.33 liters
10.25”, 260.4mm
9.13”, 231.8mm
fitted as standard
n/a
0.28”, 7.1mm
9.63”, 244.5mm
4.33”, 110mm
9.7 lbs., 4.4 kg
10.9 lbs., 4.9 kg
copper voice coil
Polyimide former
ferrite magnet
vented and extended core
die-cast aluminum basket
Paper cone
cloth cone edge
solid composition paper dust cap
legend BP102 legend B81010”, 254mm
8 or 4 ohms
200W
400W
35hz
40hz-2khz
92
38 oz.
0.312”, 7.92mm
2”, 50.8mm
35hz
5.59
0.83mh
5.36
0.47
0.43
91.2 liters / 3.2 cu.ft.
207cc
0.54mm/n
10.0 t-m
38 grams
75
6.2mm
334.5 cm2
10.0mm
14-28 liters/ 0.5-1 cu.ft.
25.5-62 liters/ 0.9-2.2 cu.ft.
71.3 cu.in / 1.17 liters
10.08”, 256.1mm
9.05”, 229.7mm
fitted as standard
n/a
0.25”, 6.4mm
9.66”, 245.4mm
4.25”, 108mm
8.9 lbs., 4 kg
9.1 lbs., 4.1 kg
copper voice coil
Polyimide former
ferrite magnet
non-vented core
Pressed steel basket
Paper cone
cloth cone edge
Zurette dust cap
10”, 254mm
32 ohms
150W
300W
52hz
49hz-5.1khz
92.7
30 oz.
0.312”, 7.94mm
2”, 50.8mm
52.07hz
27.5
2.72mh
13.91
0.68
0.65
66.4 liters / 2.34 cu.ft.
165.2cc
0.39mm/n
17.7 t-m
23.8 grams
76.8
4.7mm
350.1 cm2
9.5mm
14-35 liters/0.5-1.3 cu.ft.
45-76 liters/1.6-2.7 cu.ft.
66.9 cu.in / 1.1 liters
10.11”, 256.8mm
9.13”, 231.9mm
fitted as standard
fitted as standard
0.23”, 5.7mm
9.60”, 243.8mm
4.08”, 103.6mm
6.7 lbs, 3.04 kg
7.9 lbs, 3.6 kg
copper voice coil
Kapton
ferrite magnet
non-vented core
Pressed steel basket
Paper cone
cloth cone edge
Zurette dust cap
legend B102
49WWW.eminence.com * Please see footnotes on Page 3 for information regarding nominal imPedance, Power rating and sensitivity.
Basslite® s2012 Basslite® c2515 legend ca154
legend cB158
legend cB158
Basslite® c2515 legend ca154Basslite® s201215”, 381mm
4 ohms
300W
600W
51.hz
45hz-3.0khz
96.9
56 oz.
.38”, 9.53mm
2.5”, 63.5mm
51hz
2.9
0.80mh
4.94
0.54
0.49
108.2 liters / 3.82 cu.ft.
412cc
0.11mm/n
12.2 t-m
87 grams
94
5.0mm
823.7 cm2
8.0mm
40-71 liters/1.4-2.5 cu.ft.
45-170 liters/1.6-6.0 cu.ft.
220.8 cu.in / 3.62 liters
15.15”, 384.81mm
13.87”,352.3mm
fitted as standard
n/a
0.25”, 6.4mm
14.56”, 369.8mm
6.25”, 159mm
11.9 lbs., 5.4 kg
14.1 lbs., 6.4 kg
copper voice coil
Polyimide former
ferrite magnet
vented core
Pressed steel basket
treated Paper cone
sealed cloth surround
treated paper dust cap
12”, 304.8mm
8 ohms
150W
300W
48hz
49hz-4.5khz
97
4 oz.
0.28”, 7.2mm
2”, 50.8mm
48hz
5.1
0.43mh
5.5
0.53
0.48
91 liters / 3.2 cu.ft.
270cc
0.24mm/n
11.7 t-m
46 grams
91
5.2mm
519.5 cm2
9.8mm
31-35 liters/ 1.1-1.3 cu.ft.
42.5-85 liters/ 1.5-3 cu.ft.
102.2 cu.in / 1.67 liters
12.03”, 305.5mm
10.95”, 278.1mm
fitted as standard
n/a
0.25”, 6.4mm
11.59”, 294.3mm
5.1”, 130mm
4.1 lbs., 1.9 kg
5.8 lbs., 2.6 kg
copper voice coil
Polyimide former
neodymium magnet
non-vented core
Pressed steel basket
Paper cone
cloth cone edge
solid composition felt dust cap
15”, 381mm
4 ohms
300W
600W
38hz
52hz-2.5khz
98
7 oz.
0.28”, 7mm
2.5”, 63.5mm
38hz
3.72
0.39mh
4.7
0.50
0.45
260 liters / 9.2 cu.ft.
381cc
0.26mm/n
11.1 t-m
70 grams
76
4.5mm
856 cm2
8.5mm
45-82 liters/ 1.6-2.9 cu.ft.
85-119 liters/ 3-4.2 cu.ft.
145.1 cu.in / 2.38 liters
15.32”, 389.1mm
14.0”, 355.6mm
fitted as standard
fitted as standard
0.28”, 7.0mm
14.56”, 369.9mm
6.9”, 175mm
5.7 lbs., 2.6 kg
7.9 lbs., 3.6 kg
copper voice coil
Polyimide former
neodymium magnet
vented core
die-cast aluminum basket
Paper cone
cloth cone edge
solid composition paper dust cap
15”, 381mm
8 ohms
300W
600W
34hz
47hz-3khz
98
80 oz.
0.375”, 9.53mm
2.5”, 63.5mm
34hz
6.15
0.33mh
5.9
0.36
0.34
336 liters / 11.9 cu.ft.
411cc
0.31mm/n
16.0 t-m
70 grams
95
4.8mm
856.3 cm2
9.5mm
54-65 liters/ 1.9-2.3 cu.ft.
54-159 liters/ 1.9-5.6 cu.ft.
239 cu.in / 3.92 liters
15.21”, 386.4mm
14.0”, 355.3mm
fitted as standard
fitted as standard
0.28”, 7.1mm
14.56”, 369.9mm
6.5”, 165mm
17.3 lbs., 7.9 kg
19.4 lbs., 8.8 kg
copper voice coil
Polyimide former
ferrite magnet
vented and extended core
die-cast aluminum basket
Paper cone
cloth cone edge
solid composition paper dust cap
nam
eaP
Plic
atio
nco
nfig
urat
ion
low
end
resP
onse
low
end
shaP
emi
d-ra
nge
resP
onse
mid-
rang
e sh
aPe
high
-end
re
sPon
sevo
lume
/Po
wer
over
all c
olor
atio
n*br
eak-
uP
mode
sPo
wer
ran
gein
stru
ment
*ge
nre o
f mus
ic*
mav
eric
k12
" oPe
n ba
ck1
x 12
"ag
gres
sive
fat/
roun
dmo
dera
tew
arm
mode
rate
loud
erve
ry b
alan
ced,
war
m, fa
t, cl
ean
amer
ican
tone
wit
h fa
t low
s, w
arm
mids
, and
arti
cula
te h
ighs
. mor
e att
enua
tion
Prov
ides
mor
e war
mth
and
fatt
er lo
ws
medi
umuP
to 7
5 w
atts
lead
/rhy
thm
guita
ral
l gen
res
the
coPP
erhe
ad10
" oPe
n or
clos
ed b
ack
1, 2
, or
4 x
10"
mode
rate
tigh
tag
gres
sive
war
mmo
dera
telo
uder
extr
emel
y ba
lanc
ed v
inta
ge to
ne w
ith
a lit
tle c
ount
ry h
onk
and
a to
uch
of
clas
sic b
lues
tone
.me
dium
uP to
75
wat
tsle
ad/r
hyth
m gu
itar,
harm
onic
a
coun
try,
blue
s, b
lueg
rass
,
and
funk
del
ta d
emon
10" c
lose
d ba
ck1,
2, o
r 4
x 10
"mo
dera
tefa
t/ro
und
subd
ued
dark
subd
ued
loud
extr
emel
y ba
lanc
ed, d
ark,
crea
my sm
ooth
tone
slow
uP to
100
wat
tsle
ad/r
hyth
m gu
itar
jazz
, del
ta b
lues
, and
clas
sica
l
lil'
bud
dy10
" oPe
n or
clos
ed b
ack
1, 2
, or
4 x
10"
aggr
essi
vefa
t/ro
und
mode
rate
war
msu
bdue
dlo
uder
a cl
ean
and
full
tone
, slo
w to
bre
ak-u
P, bu
t cru
nchy
whe
n dr
iven
. smo
othe
r
and
less
def
ined
than
man
y 10
guita
r sP
eake
rs.
slow
uP to
50
wat
tsle
ad/r
hyth
m gu
itar,
harm
onic
aja
zz, r
ock,
and
blu
es
rag
in ca
jun
10" o
Pen
or cl
osed
bac
k1,
2, o
r 4
x 10
"ag
gres
sive
chun
kymo
dera
tecr
isP
aggr
essi
velo
udes
tve
ry lo
ud, t
ouch
sens
itiv
e and
res
Pons
ive w
ith
nice
bel
l sou
ndin
g toP
end
and
a lit
tle b
ite.
me
dium
uP to
75
wat
tsle
ad/r
hyth
m gu
itar
amer
ican
roc
k, b
lues
, and
coun
try
bla
ck m
ount
ain
12" o
Pen
or cl
osed
bac
k1
or 2
x 1
2"su
bdue
dti
ght
mode
rate
war
mag
gres
sive
loud
ervi
ntag
e ame
rica
n vo
iced
tone
wit
h ti
ght l
ows a
nd w
arm,
smoo
th u
PPer
mid
emPh
asis
and
hig
hs. g
reat
sing
le n
ote l
ead
tone
fast
uP to
30
wat
tsle
ad/r
hyth
m gu
itar
blue
s, cl
assi
c roc
k, co
untr
y
bla
ck Po
wde
r12
" oPe
n ba
ck1,
or
2 x
12"
subd
ued
tigh
tmo
dera
tecr
isP
aggr
essi
velo
uder
raw
and
bri
ght w
ith
tigh
t bas
s and
exPl
osiv
e mid
s and
hig
hsme
dium
uP to
75
wat
tsle
ad/r
hyth
m gu
itar
sout
hern
roc
k, co
lleg
e roc
k,
heav
y me
tal,
and
grun
ge
can
is m
ajor
12" o
Pen
or cl
osed
bac
k1,
2, o
r 4
x 12
"ag
gres
sive
fat/
roun
dmo
dera
tew
arm
mode
rate
loud
est
clea
n, fu
ll v
inta
ge to
ne w
ith
fat,
war
m lo
ws,
woo
dy m
ids a
nd ta
me, s
moot
h
high
ssl
owuP
to 5
0 w
atts
lead
/rhy
thm
guita
rco
untr
y, bl
ues,
jazz
, cla
ssi-
cal,
rock
can
nabi
s rex
12" o
Pen
or cl
osed
bac
k1,
2, o
r 4
x 12
"ag
gres
sive
fat/
roun
dmo
dera
tew
arm
mode
rate
loud
est
clea
n an
d fu
ll, w
ith
lots
of b
ody
and
sPar
kle.
smo
key
smoo
th w
ith
high
-end
defin
itio
n.sl
owuP
to 5
0 w
atts
lead
/rhy
thm
guita
r,
acou
stic
guita
r, k
eybo
ard
coun
try,
jazz
, cla
ssic
al
com
monw
ealt
h 12
"12
" oPe
n or
clos
ed b
ack
1, o
r 2
x 12
"ag
gres
sive
fat/
roun
dmo
dera
tew
arm
mode
rate
loud
erw
arm
and
rich
, but
als
o ve
ry cl
ean
and
wel
l def
ined
. gre
at Pr
esen
ce! v
ery
full
and
smoo
th. v
ery
littl
e con
e bre
ak-u
P, bu
t lik
es o
verd
rive
.sl
owuP
to 1
25 w
atts
lead
/rhy
thm/
stee
l
guita
ral
l gen
res
lil'
texa
s12
" oPe
n or
clos
ed b
ack
1, 2
, or
4 x
12"
aggr
essi
veti
ght
aggr
essi
vecr
isP
aggr
essi
velo
uder
very
bal
ance
d w
ith
cris
P mid
s and
toP e
nd b
ite.
tig
ht b
otto
m en
d, v
ery
amer
ican
tona
lity.
medi
umuP
to 1
25 w
atts
lead
/rhy
thm
guita
rcl
assi
c roc
k, b
lues
, cou
ntry
red
whi
te a
nd b
lues
12" o
Pen
or cl
osed
bac
k1,
2, o
r 4
x 12
"mo
dera
teti
ght
mode
rate
war
mag
gres
sive
loud
erni
ce ti
ght l
ow-e
nd, s
moot
h mi
dran
ge a
nd to
P end
sPar
kle.
ame
rica
n co
usin
to
the g
over
nor.
medi
umuP
to 1
20 w
atts
lead
/rhy
thm
guita
rcl
assi
c ame
rica
n ro
ck to
ne o
f the
60's
and
70'
s
scr
eami
n ea
gle
12" o
Pen
or cl
osed
bac
k1,
2, o
r 4
x 12
"ag
gres
sive
tigh
tmo
dera
tecr
isP
aggr
essi
velo
uder
brig
ht a
nd a
rtic
ulat
e ton
e wit
h sc
ream
in to
P end
and
tigh
t bas
sme
dium
uP to
50
wat
tsle
ad/r
hyth
m gu
itar
good
club
sPea
ker
for
amer
ican
blue
s and
roc
k
sw
amP t
hang
12" o
Pen
or cl
osed
bac
k1,
2, o
r 4
x 12
"ag
gres
sive
fat/
roun
dag
gres
sive
dark
mode
rate
loud
est
very
Pow
erfu
l, th
ick
and
chun
ky to
ne. v
ery
touc
h se
nsit
ive w
ith
good
sust
ain.
awes
ome b
otto
m en
d.sl
owuP
to 1
50 w
atts
lead
/rhy
thm
guita
rve
ry a
meri
can
tone
suita
ble f
or
blue
s, r
ock,
and
jazz
tex
as h
eat
12" o
Pen
or cl
osed
bac
k1,
2, o
r 4
x 12
"ag
gres
sive
fat/
chun
kyag
gres
sive
cris
Pmo
dera
telo
uder
nice
war
m, fa
t ton
e wit
h a
littl
e toP
end
bite
and
clar
ity.
ver
y to
uch
sens
itiv
e
wit
h a
hint
of b
riti
sh fl
avor
.me
dium
uP to
150
wat
tsle
ad/r
hyth
m gu
itar
amer
ican
roc
k, b
lues
, and
sout
hern
roc
k
com
monw
ealt
h 15
"15
" oPe
n ba
ck1,
or
2 x
15"
aggr
essi
vefa
t/ro
und
mode
rate
war
mmo
dera
telo
uder
war
m an
d ri
ch, b
ut a
lso
very
clea
n an
d w
ell d
efin
ed. g
reat
Pres
ence
! ver
y
full
and
smoo
th. v
ery
littl
e con
e bre
ak-u
P, bu
t lik
es o
verd
rive
.sl
owuP
to 1
50 w
atts
lead
/rhy
thm/
stee
l
guita
ral
l gen
res
rei
gnma
ker
12" o
Pen
back
1 x
12"
mode
rate
tigh
tag
gres
sive
war
mag
gres
sive
loud
er
very
bal
ance
d br
itis
h to
ne w
ith
tigh
t/Pu
nchy
low
s, w
arm/
deta
iled
mids
,
abun
dant
in h
armo
nic d
etai
l, an
d ar
ticu
late
hig
hs. m
ore a
tten
uati
on Pr
ovid
es
more
war
mth
and
fatt
er lo
ws.
medi
umuP
to 7
5 w
atts
lead
/rhy
thm
guita
ral
l gen
res
ram
rod
10" o
Pen
or cl
osed
bac
k1,
2, o
r 4
x 10
"ag
gres
sive
chun
kymo
dera
tew
arm
aggr
essi
velo
uder
very
loud
, gut
sy, a
nd m
eaty
ton
e w
ith
sing
ing
high
s an
d ni
ce, c
lear
over
tone
sme
dium
uP to
75
wat
tsle
ad/r
hyth
m gu
itar
brit
ish
rock
and
blu
es, c
ount
ry
and
jazz
red
fang
10
10" o
Pen
or cl
osed
bac
k1,
2, o
r 4
x 10
"ag
gres
sive
chun
kymo
dera
tew
arm
aggr
essi
velo
udes
tvi
ntag
e bri
tish
tone
wit
h lo
ads o
f det
ail,
chim
e and
grit
and
a n
icel
y de
fined
low
end
medi
umuP
to 5
0 w
atts
lead
/rhy
thm
guita
r
vint
age c
lass
ic b
riti
sh to
ne
for
blue
s, co
untr
y, ro
ck, in
die
and
jazz
the
gove
rnor
12" o
Pen
or cl
osed
bac
k1,
2, o
r 4
x 12
"mo
dera
teti
ght
aggr
essi
vew
arm
mode
rate
loud
est
clas
sic
brit
ish
tone
. th
ick
and
raun
chy
wit
h lo
ts o
f mid
sfa
stuP
to 7
5 w
atts
lead
/rhy
thm
guita
rcl
assi
c bri
tish
roc
k to
ne o
f the
60's
and
70'
s
man
o w
ar12
" oPe
n or
clos
ed b
ack
1, 2
, or
4 x
12"
mode
rate
chun
kyag
gres
sive
cris
Pag
gres
sive
loud
est
a Pr
oven
and
rev
ered
soun
d, v
ery
loud
and
res
Pons
ive/
arti
cula
te in
ever
y
regi
ster
. chu
nky
and
solid
soun
d w
ith
a li
ttle
toP e
nd sP
arkl
esl
owuP
to 1
20 w
atts
lead
/rhy
thm
guita
r,
harm
onic
a
grea
t for
coll
ege r
ock,
clas
sic
rock
, gru
nge,
and
hea
vy m
etal
Pri
vate
jack
12" o
Pen
or cl
osed
bac
k1,
2, o
r 4
x 12
"mo
dera
teti
ght
mode
rate
war
mag
gres
sive
loud
erth
ick
and
smoo
th, w
ith
lots
of m
ids a
nd ex
tend
ed h
ighs
. ver
y w
ell b
alan
ced
sPea
ker.
cla
ssic
bri
tish
flav
orme
dium
uP to
50
wat
tsle
ad/r
hyth
m gu
itar
clas
sic b
riti
sh to
ne fo
r bl
ues,
indi
e, ja
zz
red
fang
12" o
Pen
or cl
osed
bac
k1,
2, o
r 4
x 12
"mo
dera
tech
unky
mode
rate
war
mag
gres
sive
loud
est
vint
age b
riti
sh so
und
wit
h w
arm
unde
rton
es a
nd h
igh-
end
sPar
kle
fast
uP to
50
wat
tsle
ad/r
hyth
m gu
itar
vint
age c
lass
ic b
riti
sh to
ne fo
r
blue
s, co
untr
y, in
die a
nd ja
zz
the
tone
sPot
ter
12" o
Pen
or cl
osed
bac
k1,
2, o
r 4
x 12
"ag
gres
sive
fat/
roun
dag
gres
sive
war
mmo
dera
telo
uder
very
smoo
th a
nd w
arm
wit
h a
fat b
otto
m en
d an
d hi
ghs t
hat c
ut th
roug
h th
e
mix.
war
m an
d th
ick
over
tone
sme
dium
uP to
75
wat
tsle
ad/r
hyth
m gu
itar
auth
enti
c bri
tish
flav
or w
ell
suit
ed fo
r bl
ues a
nd cl
assi
c roc
k
the
tonk
er12
" oPe
n or
clos
ed b
ack
1, 2
, or
4 x
12"
aggr
essi
vefa
t/ro
und
mode
rate
war
mmo
dera
telo
udes
ta
very
fat,
clea
n an
d w
arm
tone
thro
ugh
the m
id-r
ange
, smo
oth
toP e
ndme
dium
uP to
150
wat
tsle
ad/r
hyth
m gu
itar
engl
ish
rock
, sou
ther
n ro
ck,
coun
try
(gre
at w
ith
a te
leca
ster
)
ton
kerl
ite
12" o
Pen
or cl
osed
bac
k1,
2, o
r 4
x 12
"ag
gres
sive
fat/
roun
dmo
dera
tew
arm
aggr
essi
velo
udes
ta
nice
rou
nd, b
alan
ced
tone
like
the t
onke
r, b
ut w
ith
exte
nded
toP e
nd a
nd
less
low
er-m
id m
eat.
medi
umuP
to 1
25 w
atts
lead
/rhy
thm
guita
rbl
ues,
sout
hern
roc
k, co
untr
y
the
wiz
ard
12" o
Pen
or cl
osed
bac
k1,
2, o
r 4
x 12
"ag
gres
sive
fat/
chun
kyag
gres
sive
war
mag
gres
sive
loud
est
very
art
icul
ate,
but
wit
h a
hint
of g
rit.
nic
e sus
tain
and
exce
Ptio
nall
y go
od
tigh
t bot
tom.
cro
ss b
etw
een
Priv
ate j
ack
and
the g
over
nor
medi
umuP
to 7
5 w
atts
lead
/rhy
thm
guita
rcl
assi
c roc
k to
nes o
f the
60'
s
and
70's
big
ben
15" o
Pen
back
1, o
r 2
x 1
5"ag
gres
sive
fat/
roun
dsu
bdue
dda
rkmo
dera
telo
uder
a ve
ry b
ig, c
lean
and
war
m br
itis
h so
und.
a so
mew
hat t
hroa
ty to
ne w
ith
fat
bass
and
smoo
th h
ighs
.me
dium
uP to
225
wat
tsle
ad/r
hyth
m gu
itar
delt
a bl
ues,
texa
s blu
es, j
azz,
and
coun
try
le
gend
102
8k10
" oPe
n or
clos
ed b
ack
1, 2
, or
4 x
10"
subd
ued
tigh
tmo
dera
tew
arm
aggr
essi
velo
udvi
ntag
e ame
rica
n to
ne w
ith
mode
rate
, but
tigh
t, Pe
rcus
sive
low
s and
exte
nded
high
s.fa
stuP
to 3
5 w
atts
lead
/rhy
thm
guita
r,
harm
onic
aco
untr
y, bl
ues,
roc
k
le
gend
105
810
" oPe
n or
clos
ed b
ack
1, 2
, or
4 x
10"
mode
rate
chun
kymo
dera
tew
arm
mode
rate
loud
ervi
ntag
e ame
rica
n to
ne w
ith
Punc
hy lo
ws a
nd w
arm,
smoo
th, b
lues
y mi
ds a
nd
high
s. f
atte
r le
gend
102
8k to
ne w
ith
more
deP
th.
medi
umuP
to 7
5 w
atts
lead
/rhy
thm
guita
rco
untr
y, bl
ues,
roc
k, ja
zz
le
gend
125
812
" oPe
n or
clos
ed b
ack
1, 2
, or
4 x
12"
subd
ued
tigh
tmo
dera
tew
arm
aggr
essi
velo
uder
vint
age a
meri
can
tone
wit
h ti
ght l
ows a
nd w
arm,
smoo
th m
ids a
nd h
ighs
.
stro
ng u
PPer
mid
emPh
asis
and
exte
nded
hig
hs.
medi
umuP
to 7
5 w
atts
lead
/rhy
thm
guita
rbl
ues,
roc
k
le
gend
v12
812
" oPe
n or
clos
ed b
ack
1, 2
, or
4 x
12"
mode
rate
tigh
tmo
dera
tew
arm
mode
rate
loud
erba
lanc
ed, m
ore m
ello
w b
riti
sh so
und
wit
h w
arm,
smoo
th m
ids a
nd h
ighs
and
tigh
t low
s.me
dium
uP to
120
wat
tsle
ad/r
hyth
m gu
itar
blue
s, r
ock,
hea
vy m
etal
le
gend
gb12
812
" oPe
n or
clos
ed b
ack
1, 2
, or
4 x
12"
mode
rate
fat/
roun
dmo
dera
tew
arm
mode
rate
loud
ercl
eane
r br
itis
h vo
iced
tone
wit
h a
full
low
end,
war
m, th
roat
y mi
ds a
nd a
ver
y
oPen
toP e
nd. a
clea
ner
Priv
ate j
ack
tone
wit
h a
fatt
er lo
w en
d.me
dium
uP to
50
wat
tsle
ad/r
hyth
m gu
itar
coun
try,
blue
s, r
ock
le
gend
121
812
" oPe
n or
clos
ed b
ack
1, 2
, or
4 x
12"
aggr
essi
vefa
t/ro
und
mode
rate
war
mmo
dera
telo
uder
very
bal
ance
d, fa
t, ro
und,
Punc
hy lo
ws a
nd w
arm,
smoo
th m
ids a
nd lo
ws,
ver
y
clea
n an
d ar
ticu
late
.me
dium
uP to
150
wat
tsle
ad/r
hyth
m gu
itar
coun
try,
blue
s, r
ock,
jazz
le
gend
151
815
" oPe
n ba
ck1,
or
2 x
15"
aggr
essi
veti
ght
mode
rate
war
mmo
dera
telo
uder
wel
l bal
ance
d 15
" wit
h ti
ght/
Punc
hy lo
ws a
nd w
arm,
smoo
th m
ids a
nd h
ighs
.me
dium
uP to
150
wat
tsle
ad/r
hyth
m gu
itar
coun
try,
blue
s, r
ock,
jazz
*Col
orat
ion,
Ton
e, a
nd t
he a
ppro
pria
tene
ss o
f a s
peak
er fo
r a
spec
ific
genr
e of
mus
ic a
re v
ery
subj
ectiv
e su
bjec
ts.
Emin
ence
has
ded
icat
ed c
ount
less
hou
rs t
o th
e to
nal e
valu
atio
n of
eac
h sp
eake
r in
the
se t
wo
seri
es.
Add
ition
al li
sten
ing
test
s w
ere
also
con
duct
ed b
y g
reg
Mar
tin, l
ead
guita
rist
for
the
Kent
ucky
Hea
dhun
ters
and
Ste
ve W
ilson
of A
mbi
ent
Soun
d, b
oth
reco
gniz
ed in
the
mus
ic in
dust
ry a
s ex
pert
s on
the
sub
ject
of g
uita
r to
ne.
This
dat
a is
pro
vide
d to
be
used
as
a ge
nera
l gu
idel
ine
to a
id in
gui
tar
spea
ker
sele
ctio
n, h
owev
er t
he s
uita
bilit
y of
a s
peci
fic s
peak
er fo
r a
spec
ific
purp
ose
is a
mat
ter
of p
erso
nal t
aste
and
can
onl
y be
det
erm
ined
by
you
the
user
. Em
inen
ce m
akes
no
guar
ante
es r
egar
ding
the
sui
tabi
lity
of
any
spea
ker
in t
hese
ser
ies
for
any
spec
ific
appl
icat
ion.
gu
ita
r s
Pea
Ker
to
na
l c
ha
ra
cte
ris
tic
s a
nd
aP
Pli
ca
tio
n g
uid
e
nam
eaP
Plic
atio
nco
nfig
urat
ion
low
end
resP
onse
low
end
shaP
emi
d-ra
nge
resP
onse
mid-
rang
e sh
aPe
high
-end
re
sPon
sevo
lume
/Po
wer
over
all c
olor
atio
n*br
eak-
uP
mode
sPo
wer
ran
gein
stru
ment
*ge
nre o
f mus
ic*
mav
eric
k12
" oPe
n ba
ck1
x 12
"ag
gres
sive
fat/
roun
dmo
dera
tew
arm
mode
rate
loud
erve
ry b
alan
ced,
war
m, fa
t, cl
ean
amer
ican
tone
wit
h fa
t low
s, w
arm
mids
, and
arti
cula
te h
ighs
. mor
e att
enua
tion
Prov
ides
mor
e war
mth
and
fatt
er lo
ws
medi
umuP
to 7
5 w
atts
lead
/rhy
thm
guita
ral
l gen
res
the
coPP
erhe
ad10
" oPe
n or
clos
ed b
ack
1, 2
, or
4 x
10"
mode
rate
tigh
tag
gres
sive
war
mmo
dera
telo
uder
extr
emel
y ba
lanc
ed v
inta
ge to
ne w
ith
a lit
tle c
ount
ry h
onk
and
a to
uch
of
clas
sic b
lues
tone
.me
dium
uP to
75
wat
tsle
ad/r
hyth
m gu
itar,
harm
onic
a
coun
try,
blue
s, b
lueg
rass
,
and
funk
del
ta d
emon
10" c
lose
d ba
ck1,
2, o
r 4
x 10
"mo
dera
tefa
t/ro
und
subd
ued
dark
subd
ued
loud
extr
emel
y ba
lanc
ed, d
ark,
crea
my sm
ooth
tone
slow
uP to
100
wat
tsle
ad/r
hyth
m gu
itar
jazz
, del
ta b
lues
, and
clas
sica
l
lil'
bud
dy10
" oPe
n or
clos
ed b
ack
1, 2
, or
4 x
10"
aggr
essi
vefa
t/ro
und
mode
rate
war
msu
bdue
dlo
uder
a cl
ean
and
full
tone
, slo
w to
bre
ak-u
P, bu
t cru
nchy
whe
n dr
iven
. smo
othe
r
and
less
def
ined
than
man
y 10
guita
r sP
eake
rs.
slow
uP to
50
wat
tsle
ad/r
hyth
m gu
itar,
harm
onic
aja
zz, r
ock,
and
blu
es
rag
in ca
jun
10" o
Pen
or cl
osed
bac
k1,
2, o
r 4
x 10
"ag
gres
sive
chun
kymo
dera
tecr
isP
aggr
essi
velo
udes
tve
ry lo
ud, t
ouch
sens
itiv
e and
res
Pons
ive w
ith
nice
bel
l sou
ndin
g toP
end
and
a lit
tle b
ite.
me
dium
uP to
75
wat
tsle
ad/r
hyth
m gu
itar
amer
ican
roc
k, b
lues
, and
coun
try
bla
ck m
ount
ain
12" o
Pen
or cl
osed
bac
k1
or 2
x 1
2"su
bdue
dti
ght
mode
rate
war
mag
gres
sive
loud
ervi
ntag
e ame
rica
n vo
iced
tone
wit
h ti
ght l
ows a
nd w
arm,
smoo
th u
PPer
mid
emPh
asis
and
hig
hs. g
reat
sing
le n
ote l
ead
tone
fast
uP to
30
wat
tsle
ad/r
hyth
m gu
itar
blue
s, cl
assi
c roc
k, co
untr
y
bla
ck Po
wde
r12
" oPe
n ba
ck1,
or
2 x
12"
subd
ued
tigh
tmo
dera
tecr
isP
aggr
essi
velo
uder
raw
and
bri
ght w
ith
tigh
t bas
s and
exPl
osiv
e mid
s and
hig
hsme
dium
uP to
75
wat
tsle
ad/r
hyth
m gu
itar
sout
hern
roc
k, co
lleg
e roc
k,
heav
y me
tal,
and
grun
ge
can
is m
ajor
12" o
Pen
or cl
osed
bac
k1,
2, o
r 4
x 12
"ag
gres
sive
fat/
roun
dmo
dera
tew
arm
mode
rate
loud
est
clea
n, fu
ll v
inta
ge to
ne w
ith
fat,
war
m lo
ws,
woo
dy m
ids a
nd ta
me, s
moot
h
high
ssl
owuP
to 5
0 w
atts
lead
/rhy
thm
guita
rco
untr
y, bl
ues,
jazz
, cla
ssi-
cal,
rock
can
nabi
s rex
12" o
Pen
or cl
osed
bac
k1,
2, o
r 4
x 12
"ag
gres
sive
fat/
roun
dmo
dera
tew
arm
mode
rate
loud
est
clea
n an
d fu
ll, w
ith
lots
of b
ody
and
sPar
kle.
smo
key
smoo
th w
ith
high
-end
defin
itio
n.sl
owuP
to 5
0 w
atts
lead
/rhy
thm
guita
r,
acou
stic
guita
r, k
eybo
ard
coun
try,
jazz
, cla
ssic
al
com
monw
ealt
h 12
"12
" oPe
n or
clos
ed b
ack
1, o
r 2
x 12
"ag
gres
sive
fat/
roun
dmo
dera
tew
arm
mode
rate
loud
erw
arm
and
rich
, but
als
o ve
ry cl
ean
and
wel
l def
ined
. gre
at Pr
esen
ce! v
ery
full
and
smoo
th. v
ery
littl
e con
e bre
ak-u
P, bu
t lik
es o
verd
rive
.sl
owuP
to 1
25 w
atts
lead
/rhy
thm/
stee
l
guita
ral
l gen
res
lil'
texa
s12
" oPe
n or
clos
ed b
ack
1, 2
, or
4 x
12"
aggr
essi
veti
ght
aggr
essi
vecr
isP
aggr
essi
velo
uder
very
bal
ance
d w
ith
cris
P mid
s and
toP e
nd b
ite.
tig
ht b
otto
m en
d, v
ery
amer
ican
tona
lity.
medi
umuP
to 1
25 w
atts
lead
/rhy
thm
guita
rcl
assi
c roc
k, b
lues
, cou
ntry
red
whi
te a
nd b
lues
12" o
Pen
or cl
osed
bac
k1,
2, o
r 4
x 12
"mo
dera
teti
ght
mode
rate
war
mag
gres
sive
loud
erni
ce ti
ght l
ow-e
nd, s
moot
h mi
dran
ge a
nd to
P end
sPar
kle.
ame
rica
n co
usin
to
the g
over
nor.
medi
umuP
to 1
20 w
atts
lead
/rhy
thm
guita
rcl
assi
c ame
rica
n ro
ck to
ne o
f the
60's
and
70'
s
scr
eami
n ea
gle
12" o
Pen
or cl
osed
bac
k1,
2, o
r 4
x 12
"ag
gres
sive
tigh
tmo
dera
tecr
isP
aggr
essi
velo
uder
brig
ht a
nd a
rtic
ulat
e ton
e wit
h sc
ream
in to
P end
and
tigh
t bas
sme
dium
uP to
50
wat
tsle
ad/r
hyth
m gu
itar
good
club
sPea
ker
for
amer
ican
blue
s and
roc
k
sw
amP t
hang
12" o
Pen
or cl
osed
bac
k1,
2, o
r 4
x 12
"ag
gres
sive
fat/
roun
dag
gres
sive
dark
mode
rate
loud
est
very
Pow
erfu
l, th
ick
and
chun
ky to
ne. v
ery
touc
h se
nsit
ive w
ith
good
sust
ain.
awes
ome b
otto
m en
d.sl
owuP
to 1
50 w
atts
lead
/rhy
thm
guita
rve
ry a
meri
can
tone
suita
ble f
or
blue
s, r
ock,
and
jazz
tex
as h
eat
12" o
Pen
or cl
osed
bac
k1,
2, o
r 4
x 12
"ag
gres
sive
fat/
chun
kyag
gres
sive
cris
Pmo
dera
telo
uder
nice
war
m, fa
t ton
e wit
h a
littl
e toP
end
bite
and
clar
ity.
ver
y to
uch
sens
itiv
e
wit
h a
hint
of b
riti
sh fl
avor
.me
dium
uP to
150
wat
tsle
ad/r
hyth
m gu
itar
amer
ican
roc
k, b
lues
, and
sout
hern
roc
k
com
monw
ealt
h 15
"15
" oPe
n ba
ck1,
or
2 x
15"
aggr
essi
vefa
t/ro
und
mode
rate
war
mmo
dera
telo
uder
war
m an
d ri
ch, b
ut a
lso
very
clea
n an
d w
ell d
efin
ed. g
reat
Pres
ence
! ver
y
full
and
smoo
th. v
ery
littl
e con
e bre
ak-u
P, bu
t lik
es o
verd
rive
.sl
owuP
to 1
50 w
atts
lead
/rhy
thm/
stee
l
guita
ral
l gen
res
rei
gnma
ker
12" o
Pen
back
1 x
12"
mode
rate
tigh
tag
gres
sive
war
mag
gres
sive
loud
er
very
bal
ance
d br
itis
h to
ne w
ith
tigh
t/Pu
nchy
low
s, w
arm/
deta
iled
mids
,
abun
dant
in h
armo
nic d
etai
l, an
d ar
ticu
late
hig
hs. m
ore a
tten
uati
on Pr
ovid
es
more
war
mth
and
fatt
er lo
ws.
medi
umuP
to 7
5 w
atts
lead
/rhy
thm
guita
ral
l gen
res
ram
rod
10" o
Pen
or cl
osed
bac
k1,
2, o
r 4
x 10
"ag
gres
sive
chun
kymo
dera
tew
arm
aggr
essi
velo
uder
very
loud
, gut
sy, a
nd m
eaty
ton
e w
ith
sing
ing
high
s an
d ni
ce, c
lear
over
tone
sme
dium
uP to
75
wat
tsle
ad/r
hyth
m gu
itar
brit
ish
rock
and
blu
es, c
ount
ry
and
jazz
red
fang
10
10" o
Pen
or cl
osed
bac
k1,
2, o
r 4
x 10
"ag
gres
sive
chun
kymo
dera
tew
arm
aggr
essi
velo
udes
tvi
ntag
e bri
tish
tone
wit
h lo
ads o
f det
ail,
chim
e and
grit
and
a n
icel
y de
fined
low
end
medi
umuP
to 5
0 w
atts
lead
/rhy
thm
guita
r
vint
age c
lass
ic b
riti
sh to
ne
for
blue
s, co
untr
y, ro
ck, in
die
and
jazz
the
gove
rnor
12" o
Pen
or cl
osed
bac
k1,
2, o
r 4
x 12
"mo
dera
teti
ght
aggr
essi
vew
arm
mode
rate
loud
est
clas
sic
brit
ish
tone
. th
ick
and
raun
chy
wit
h lo
ts o
f mid
sfa
stuP
to 7
5 w
atts
lead
/rhy
thm
guita
rcl
assi
c bri
tish
roc
k to
ne o
f the
60's
and
70'
s
man
o w
ar12
" oPe
n or
clos
ed b
ack
1, 2
, or
4 x
12"
mode
rate
chun
kyag
gres
sive
cris
Pag
gres
sive
loud
est
a Pr
oven
and
rev
ered
soun
d, v
ery
loud
and
res
Pons
ive/
arti
cula
te in
ever
y
regi
ster
. chu
nky
and
solid
soun
d w
ith
a li
ttle
toP e
nd sP
arkl
esl
owuP
to 1
20 w
atts
lead
/rhy
thm
guita
r,
harm
onic
a
grea
t for
coll
ege r
ock,
clas
sic
rock
, gru
nge,
and
hea
vy m
etal
Pri
vate
jack
12" o
Pen
or cl
osed
bac
k1,
2, o
r 4
x 12
"mo
dera
teti
ght
mode
rate
war
mag
gres
sive
loud
erth
ick
and
smoo
th, w
ith
lots
of m
ids a
nd ex
tend
ed h
ighs
. ver
y w
ell b
alan
ced
sPea
ker.
cla
ssic
bri
tish
flav
orme
dium
uP to
50
wat
tsle
ad/r
hyth
m gu
itar
clas
sic b
riti
sh to
ne fo
r bl
ues,
indi
e, ja
zz
red
fang
12" o
Pen
or cl
osed
bac
k1,
2, o
r 4
x 12
"mo
dera
tech
unky
mode
rate
war
mag
gres
sive
loud
est
vint
age b
riti
sh so
und
wit
h w
arm
unde
rton
es a
nd h
igh-
end
sPar
kle
fast
uP to
50
wat
tsle
ad/r
hyth
m gu
itar
vint
age c
lass
ic b
riti
sh to
ne fo
r
blue
s, co
untr
y, in
die a
nd ja
zz
the
tone
sPot
ter
12" o
Pen
or cl
osed
bac
k1,
2, o
r 4
x 12
"ag
gres
sive
fat/
roun
dag
gres
sive
war
mmo
dera
telo
uder
very
smoo
th a
nd w
arm
wit
h a
fat b
otto
m en
d an
d hi
ghs t
hat c
ut th
roug
h th
e
mix.
war
m an
d th
ick
over
tone
sme
dium
uP to
75
wat
tsle
ad/r
hyth
m gu
itar
auth
enti
c bri
tish
flav
or w
ell
suit
ed fo
r bl
ues a
nd cl
assi
c roc
k
the
tonk
er12
" oPe
n or
clos
ed b
ack
1, 2
, or
4 x
12"
aggr
essi
vefa
t/ro
und
mode
rate
war
mmo
dera
telo
udes
ta
very
fat,
clea
n an
d w
arm
tone
thro
ugh
the m
id-r
ange
, smo
oth
toP e
ndme
dium
uP to
150
wat
tsle
ad/r
hyth
m gu
itar
engl
ish
rock
, sou
ther
n ro
ck,
coun
try
(gre
at w
ith
a te
leca
ster
)
ton
kerl
ite
12" o
Pen
or cl
osed
bac
k1,
2, o
r 4
x 12
"ag
gres
sive
fat/
roun
dmo
dera
tew
arm
aggr
essi
velo
udes
ta
nice
rou
nd, b
alan
ced
tone
like
the t
onke
r, b
ut w
ith
exte
nded
toP e
nd a
nd
less
low
er-m
id m
eat.
medi
umuP
to 1
25 w
atts
lead
/rhy
thm
guita
rbl
ues,
sout
hern
roc
k, co
untr
y
the
wiz
ard
12" o
Pen
or cl
osed
bac
k1,
2, o
r 4
x 12
"ag
gres
sive
fat/
chun
kyag
gres
sive
war
mag
gres
sive
loud
est
very
art
icul
ate,
but
wit
h a
hint
of g
rit.
nic
e sus
tain
and
exce
Ptio
nall
y go
od
tigh
t bot
tom.
cro
ss b
etw
een
Priv
ate j
ack
and
the g
over
nor
medi
umuP
to 7
5 w
atts
lead
/rhy
thm
guita
rcl
assi
c roc
k to
nes o
f the
60'
s
and
70's
big
ben
15" o
Pen
back
1, o
r 2
x 1
5"ag
gres
sive
fat/
roun
dsu
bdue
dda
rkmo
dera
telo
uder
a ve
ry b
ig, c
lean
and
war
m br
itis
h so
und.
a so
mew
hat t
hroa
ty to
ne w
ith
fat
bass
and
smoo
th h
ighs
.me
dium
uP to
225
wat
tsle
ad/r
hyth
m gu
itar
delt
a bl
ues,
texa
s blu
es, j
azz,
and
coun
try
le
gend
102
8k10
" oPe
n or
clos
ed b
ack
1, 2
, or
4 x
10"
subd
ued
tigh
tmo
dera
tew
arm
aggr
essi
velo
udvi
ntag
e ame
rica
n to
ne w
ith
mode
rate
, but
tigh
t, Pe
rcus
sive
low
s and
exte
nded
high
s.fa
stuP
to 3
5 w
atts
lead
/rhy
thm
guita
r,
harm
onic
aco
untr
y, bl
ues,
roc
k
le
gend
105
810
" oPe
n or
clos
ed b
ack
1, 2
, or
4 x
10"
mode
rate
chun
kymo
dera
tew
arm
mode
rate
loud
ervi
ntag
e ame
rica
n to
ne w
ith
Punc
hy lo
ws a
nd w
arm,
smoo
th, b
lues
y mi
ds a
nd
high
s. f
atte
r le
gend
102
8k to
ne w
ith
more
deP
th.
medi
umuP
to 7
5 w
atts
lead
/rhy
thm
guita
rco
untr
y, bl
ues,
roc
k, ja
zz
le
gend
125
812
" oPe
n or
clos
ed b
ack
1, 2
, or
4 x
12"
subd
ued
tigh
tmo
dera
tew
arm
aggr
essi
velo
uder
vint
age a
meri
can
tone
wit
h ti
ght l
ows a
nd w
arm,
smoo
th m
ids a
nd h
ighs
.
stro
ng u
PPer
mid
emPh
asis
and
exte
nded
hig
hs.
medi
umuP
to 7
5 w
atts
lead
/rhy
thm
guita
rbl
ues,
roc
k
le
gend
v12
812
" oPe
n or
clos
ed b
ack
1, 2
, or
4 x
12"
mode
rate
tigh
tmo
dera
tew
arm
mode
rate
loud
erba
lanc
ed, m
ore m
ello
w b
riti
sh so
und
wit
h w
arm,
smoo
th m
ids a
nd h
ighs
and
tigh
t low
s.me
dium
uP to
120
wat
tsle
ad/r
hyth
m gu
itar
blue
s, r
ock,
hea
vy m
etal
le
gend
gb12
812
" oPe
n or
clos
ed b
ack
1, 2
, or
4 x
12"
mode
rate
fat/
roun
dmo
dera
tew
arm
mode
rate
loud
ercl
eane
r br
itis
h vo
iced
tone
wit
h a
full
low
end,
war
m, th
roat
y mi
ds a
nd a
ver
y
oPen
toP e
nd. a
clea
ner
Priv
ate j
ack
tone
wit
h a
fatt
er lo
w en
d.me
dium
uP to
50
wat
tsle
ad/r
hyth
m gu
itar
coun
try,
blue
s, r
ock
le
gend
121
812
" oPe
n or
clos
ed b
ack
1, 2
, or
4 x
12"
aggr
essi
vefa
t/ro
und
mode
rate
war
mmo
dera
telo
uder
very
bal
ance
d, fa
t, ro
und,
Punc
hy lo
ws a
nd w
arm,
smoo
th m
ids a
nd lo
ws,
ver
y
clea
n an
d ar
ticu
late
.me
dium
uP to
150
wat
tsle
ad/r
hyth
m gu
itar
coun
try,
blue
s, r
ock,
jazz
le
gend
151
815
" oPe
n ba
ck1,
or
2 x
15"
aggr
essi
veti
ght
mode
rate
war
mmo
dera
telo
uder
wel
l bal
ance
d 15
" wit
h ti
ght/
Punc
hy lo
ws a
nd w
arm,
smoo
th m
ids a
nd h
ighs
.me
dium
uP to
150
wat
tsle
ad/r
hyth
m gu
itar
coun
try,
blue
s, r
ock,
jazz
52
understanding loudsPeaKer dataThe ability to choose the most appropriate loudspeaker for a particular enclosure is directly related to your understanding of the performance data that
manufacturers provide with their products. Prior to 1970, there were no easy or affordable methods accepted as standard in the industry for obtaining this data.
The recognized methods were expensive and often unrealistic for the thousands of individuals needing loudspeaker performance information.
thiele-small parametersin the early seventies, several technical papers were
presented to the AES (Audio Engineering Society) that
resulted in the development of what we know today
as “Thiele-Small Parameters”. These papers were
authored by A.N. Thiele, and richard H. Small.
The Thiele and Small papers concentrated on
showing how the following parameters define the
relationship between a speaker and a particular
enclosure. Eminence recommends that you develop
a basic understanding for the meaning of each
parameter so that you can make informed decisions
when choosing your loudspeakers.
fs This parameter is the free-air resonant
frequency of a speaker. Simply stated, it is the
point at which the weight of the moving parts of the
speaker becomes balanced with the force of the
speaker suspension when in motion. it is important
to know this information so that you can prevent your
enclosure from ringing like a bell when it reaches
its resonant frequency. As a general rule of thumb,
a lower Fs indicates a woofer that would be better
for low-frequency reproduction than a woofer with
a higher Fs. However, other parameters affect the
ultimate performance of a woofer as well and may
make a speaker with a higher Fs a better candidate
for your application.
re This parameter is very simply the dC resistance
of the driver in question. in other words, this
measurement is made with an ohm meter and is
often referred to as the “dCr”. This measurement
will almost always be less than the impedance
listed by the manufacturer. Many consumers get
concerned when they see that the re is less than the
published impedance and fear that their amplifier
is getting a load that is too heavy. due to the fact
that the inductance of a speaker rises with a rise in
frequency, it is not likely that the amplifier will often
see the dC resistance as its load.
le This parameter is the voice coil inductance
of the speaker measured in millihenries (mH). The
industry standard is to measure inductance at 1,000
Hz. This is a difficult parameter to explain, but
basically as frequencies get higher there will be a rise
in impedance above the dC resistance rating. This
can be attributed to the fact that the voice coil is
acting as an inductor. Consequently, the impedance
of a speaker is not a fixed resistance, but can be
represented as a curve that changes as the input
frequency changes. Maximum impedance or Zmax
occurs at Fs.
Q Parameters Qts, Qes, and Qtc are all
measurements related to the control of a speaker’s
suspension when it reaches the resonant frequency.
Qms is a measurement of the control coming
from the speaker’s mechanical suspension system;
the surround and spider.
Qes is a measurement of the control coming from
the speaker’s electrical suspension system; the voice
coil and magnet.
Qts is called the “Total Q” of the driver and is
derived from an equation where Qes is multiplied by
Qms and the result is divided by the sum of the same.
The result is Qts. As a general guideline, woofers fall
into three categories relative to their Qts:
1. Qts of .4 or below indicates a woofer well suited
for a vented enclosure.
2. Qts between .4 and .7 indicates a woofer well
suited for a sealed enclosure.
3. Qts of .7 or above indicates a woofer well suited
for free-air or infinite baffle applications.
These suggestions are simply rules of thumb and do
not always apply. For instance, the Eminence Kilomax
18 has a Qts of .56 that would indicate a sealed
enclosure, but we know that the Kilomax is one of
the most highly regarded woofers in the Professional
Audio industry for a ported enclosure.
vas/cms Vas (Not to be confused with
the recommended enclosure size.) represents
the equivalent stiffness in an air volume to the
force of the compliance (Cms) of the suspension
in a particular speaker. it is one of the trickiest
parameters to measure. Air changes relative to
humidity and temperature. Cms is measured in
meters per Newton. it is the force exerted by the
mechanical suspension of the speaker. it is simply
a measurement of its stiffness.
vd This parameter is the Peak diaphragm
displacement Volume. it is the xmax (Voice Coil
Overhang) of the driver multiplied by the Sd (Surface
area of the cone). Simply stated it is a measurement
of how much air the cone will move at full excursion
and is usually noted in cc.
Bl Expressed in Tesla meters is a measurement
of the motor strength of a speaker. This is created
by the product of the magnetic field strength times
the length of wire in the field. if you were to take
a given mass, that when placed on the cone of a
speaker would move the cone downward from its
home position, then measure the current in amperes
required to move the cone back to home position,
you can calculate Bl. The formula is Ma in grams
divided the current in amperes.
mms This parameter is the combination of the
weight of the cone assembly plus the driver radiation
mass load. Confusing…but the weight of the cone
assembly is easy. Most manufacturers know that
weight when the speaker is designed. it is the sum
of the weight of the cone assembly components. The
driver radiation mass load is the confusing part. in
simple terminology, it is the weight of the air that the
cone will have to push. Air certainly has mass and
needs to be recognized in these calculations.
rms This parameter represents the mechanical
resistance of a driver’s suspension losses. it is a
measurement of the absorption qualities of the
speaker suspension and is stated in N*sec/m.
eBP This measurement represents Fs / Qe. it is
used in many enclosure design formulas to determine
if a speaker is more suitable for a closed or vented
design. An EBP close to 100 usually indicates a
speaker that is best suited for a vented enclosure.
On the contrary, an EBP closer to 50 usually indicates
a speaker best suited for a closed box design.
xmax Short for Maximum Linear Excursion.
Speaker output becomes non-linear when the voice
coil begins to leave the magnetic gap. Although
suspensions can create non-linearity in output, the
point at which the number of turns in the gap (see
Bl) begins to decrease is when distortion starts to
increase. Some manufacturers have often used the
maximum excursion of the speaker which when
exceeded would result in mechanical damage. This
parameter is recognized as xlim. The bottom line is;
be sure you are comparing apples to apples. Most
manufacturers will specify the way this measurement
is obtained. distortion is typically very audible before
xlim is reached due to the increase in non-linearity in
the motor and suspensions.
Continued on page 54.
725 Pleasant Valley Dr. Springboro, OH 45066
Parts Express stocks more Eminence drivers than anyone — along with more than 15,000 audio, video and speaker building components!
Visit parts-express.com or call 1-800-338-0531 to order your FREE 2011 catalog!
54
understanding loudsPeaKer data, continued from Page 52.
designing enclosures
sd This parameter is the actual surface area of the
cone, normally given in square cm.
Zmax This parameter represents the speaker’s
impedance at resonance and it is usually many times
the dCr of the driver.
additional Performance datain addition to Thiele-Small Parameters, loudspeaker
manufacturers typically publish additional
measurements and performance information. Again,
it is wise to become familiar with this data and what
it actually means to you.
usable frequency range This data
is relatively self-explanatory. it is the frequency
range for which Eminence feels the device will prove
useful. Each manufacturer uses different techniques
for determining “Usable Frequency range”. Most
methods are recognized as ACCEPTABLE in the
industry, but can lend different results.
Eminence response curves are measured as follows:
All speakers are tested at 1W/1m using a variety of
test set-ups for the appropriate impedance. [LMS
using 0.25” supplied microphone (software calibrated)
mounted 1m from wall/baffle.] [2 ft. x 2 ft. baffle is
built into the wall with the speaker mounted flush
against a steel ring for minimum diffraction.] [Hafler
P1500 Trans-Nova amplifier] [2,700 cu. ft. anechoic
chamber with fiberglass on all six surfaces (three
with custom-made wedges).]
spl (Average Sensitivity) This data represents one
of the most useful specifications published for any
transducer. it is a representation of the output you
can expect from a device relative to the input power.
This is important because it requires 2 times the
power to increase the volume of a speaker 3 dB.
To increase the volume of a 50-watt guitar amplifier 3
dB (an audible, but relatively small amount), it would
require a total of 100 watts of power. The same
thing could be achieved by replacing the speaker
with one that is 3 dB more sensitive (usually a more
economical alternative).
Most manufacturers determine sensitivity by putting
the speaker in a baffle and measuring the sound
pressure level inside an anechoic chamber at a
distance of one meter, with 1 watt of input power
across the frequency response curve. A loudspeaker
measurement software program then would
generally calculate the average sound pressure level
over the response curve. This is a good method
and usually very accurate. The problem is that one
manufacturer may place the microphone one meter
from the dust cap of the speaker and gain a distinct
advantage over the manufacturer who placed the
microphone one meter from the baffle board. Again,
be sure you understand how this specification was
derived.
The Eminence method represents the average output
across the usable frequency range when applying
1W/1m into the nominal impedance. ie 2.83V/8ohms,
4V/16ohms.
Power rating This specification is very
important to transducer selection. Obviously, you
need to choose a loudspeaker that is capable of
handling the input power you are going to provide.
By the same token, you can destroy a loudspeaker by
using too little power.
generally speaking, the number one contributor to
a transducer’s ability to handle power is its ability
to release thermal energy. Those loudspeaker
characteristics are affected by several design choices,
but most notably voice coil size, magnet size, venting,
and the adhesives used in voice coil construction.
Larger coil and magnet sizes provide more area for
heat to dissipate, while venting allows thermal energy
to escape and cooler air to enter the motor structure.
Equally important is the ability of the voice coil to
handle thermal energy. Eminence is well known
for the use of proprietary adhesives and voice coil
components that maximize the coil’s ability to handle
extreme temperatures.
Mechanical factors must also be considered when
determining power handling. A transducer might
be able to handle 1,000 watts from a thermal
perspective, but would fail long before that level
was reached from a mechanical issue such as the
coil hitting the back plate, the coil coming out of
the gap, the cone buckling from too much outward
movement, or the spider bottoming on the top plate.
Be sure to consider the suggested usable frequency
range and the xlim parameter in conjunction with
the power rating and enclosure design to avoid such
failures.
The Eminence power rating is derived using an EiA
426A noise source and test standard. All tests are
conducted for 8 hours in a free-air, non-temperature
controlled environment. The Eminence Music
Program rating is double that of our standard Watts
rating.
eminence designer is a state-of-the-art loudspeaker enclosure design program
for PCs. it can calculate a box design that will bring out the best response from a loudspeaker
in seconds - it can even suggest a box for your loudspeaker! Eminence designer models
closed, vented, bandpass and passive radiator boxes. it will print box drawings and graphs for
a professional presentation. Eminence designer is quick to learn and easy to use.
1. Enter the loudspeaker parameters (for Eminence loudspeakers, simply select the model;
other loudspeaker parameters can be entered manually).
2. Calculate the box volume and tuning. This is very easy with the help of the
“Suggest” button.
3. Evaluate the performance from the nine graphs.
When the program is first run, a “Welcome” window will appear to help you configure the
program and to guide you through its illustrated online manual. The online manual contains
a “Box designers guide” to help beginners learn about sound, speakers and box design.
A “reference” section describe every feature of the program.
to learn more visit www.eminence.com.
eminence speaker llc
P.o. box 360 | 838 mulberry Pike | eminence, ky 40019Phone: 502.845.5622 | fax: 502.845.5653e-mail: [email protected] | www.eminence.com