Catalogo Completo Normalab

1

all prices in Euro per unit

CN03-2uk (all previous editions obsolete)

THE INTERNATIONAL CATALOG

index last page

2



ASTM D 5 Penetration of Bitumous Material

See overleaf

picture not mandatory


941731 - MANUAL PENETROMETER

941734 - AUTOMATIC PENETROMETER


9417582 - GREASE WORKER


941736 - OUTFIT FOR LUBRICATING GREASE


941810 - OUTFIT FOR BITUMEN

See other applications under ASTM D 217 - D 937 - D 1321 - D 1403

SCOPEThis test method covers the determination of the penetration of semi-solidand solid bitumous materials.

OTHER STANDARDSIP 49 - NFT 66004 - ISO 3997 - DIN 52010

REF. 941734This compact automated instrument uses the latest electronic technolo-gies. It is equipped with keyboard, LCD display, user friendly software andstepper motor for penetration depth as low as 0.01 mm, needle (or cone)holder, magnifying lens and low voltage illuminator, centering guide, RS232Coutput and accessories for automatic level detection for conductive sam-ples.

REF. 941731This manual penetrometer includes a large table on levelling feet with spiritlevel, a manual release mechanism and a dial indicator in 0.1 mm.Outfit (needle, holder, sample container, ...) not included.

REF. 9417582This compact twin-unit automated grease worker uses electronic counterto control the strokes number.

ACCESSORIES (for all standards)

BITUMEN ACCESSORIES (for D5)

outfit is needle + holder + weight 50g + 2 containers

LUBRICATING GREASES ACCESSORIES (for D217)

outfit is cone + holder + container

941759 Plunger plate ASTM (51 holes)

27674 Glass transfer bath (cryostat connection)941220 Constant temperature w ater bath (max 100°C)

9911504 ASTM thermometer 17C9911532 ASTM thermometer 63C9911533 ASTM thermometer 64C

99814 Standard needle 2.5 g (up to 350 u.)

941732 Calibration kit for automatic penetrometer

941737 Holder 47.5 g941810 Outf it for penetration of bitumous material941812 Additional w eight 100 g941815 Additional w eight 50 g998140 Long needle 2.5 g (up to 500 u.)998171 Sample container one use 55x35 mm (pack of 10)

998181 Sample container A l. 55x70 mm (>200 u.) 998191 Sample container A l. 55x57 mm (up to 500 u.)9417371 Bitumen automatic level detection device

99739 Grease cutter w ith blade941736 Outf it for consistency of lubricating grease941737 Holder 47.5 g941738 Standard cone 102.5 g941750 Hand grease w orker w ith cup and thermometer941751 Worker cup only

941760 Plunger plate Fed. Spec. (270 holes)997411 Sample container 76x63 mm 9900759 Thermometer for grease w orker9951810 Spatula 30x200 mm

230 V1 A50 Hz23 Kgw 260 mmd 320 mmh 540 mmon request115V 60Hz

5.6 Kgw 180 mmd 180 mmh 560 mm

230 V16 A50 Hz29 Kgw 400 mmd 260 mmh 500 mm

998173 Sample c ontainer A l. 55x 35 mm (pac k of 10)

3



ACCESSORIES (for D937)

outfit is cone + container + holder


outfit is shouldered needle + container + weight + holder


SPARE PARTS FOR ALL MODELS (2 years basis)

ASTM D 6 Loss on Heating of Oil and AsphalticCompounds

SCOPEThis test method covers the determination of the loss in mass (exclusive ofwater) of oil and asphaltic compounds when heated.

OTHER STANDARDSIP 45 - NFT 66011

REF. 941875Strictly conform to ASTM requirements because of exclusive thermocou-ple sensor installed on the rotating shelf with the control thermometer, thisis a double wall illuminated oven with glass window, 9 place revolving shelf,9 aluminium containers, thermometer and instruction manual.

ACCESSORY

SPARE PARTS (2 years basis)

ASTM D 5 continued


941875 - REVOLVING-SHELF OVEN


941811 - OUTFIT FOR PETROLEUM WAXES


941735 - OUTFIT FOR PETROLATUM

941738 Standard cone 102.5 g

941735 Outf it for consistency of petrolatum941737 Holder 47.5 g

997412 Sample container 100x65 mm w ith cover

99816 Needle w ith shoulder 2.5 g941737 Holder 47.5 g941811 Outf it for consistency of petroleum w axes941815 Additional w eight 50 g941820 Sample container w ith base plate

99742 ¼ scale cone (9,38 g)99743 ½ scale cone (37,5 g)997421 ¼ scale grease w orker (manual operation)997431 ½ scale grease w orker (manual operation)9951810 Spatula 30x200 mm

99814 Standard needle 2.5 g (up to 350 u.) 99816 Needle w ith shoulder 2.5 g941737 Holder 47.5 g941738 Standard cone 102.5 g

9418172 Sample container brass nickel plated

998762 Bulb 230V /15W9911500 ASTM thermometer 13C

998171 Sample container one use 55x35 mm (pack of 10)


9417343 Magnify ing glass for ref . 941734

9417341 Light bulb for ref . 9417349417342 Flexible light for ref . 941734


997421 - GREASE WORKER FOR ¼ CONE997431 - GREASE WORKER FOR ½ CONE


4



SCOPEThis test method covers the determination of the softening point of bitumenin the range from 30 to 157°C using the ring and ball apparatus immersedin distilled water (30 to 80°C), glycerin (80 to 157°C), or ethylene glycol (30to 110°C).


REF. 9418314Ring and ball apparatus four-test unit with tapered rings and 15Cthermometer

REF. 9418324Ring and ball apparatus four-test unit with shouldered rings and 15C ther-mometer

REF. 9418334Ring and ball apparatus four-test unit with straight rings and 15Cthermometer

ACCESSORIES (for all ref.)


REF. 40100The NBA 440 model, fully automatic tester, is equipped with ticket printer,Pt 100 probe and all equipment to perform test with shouldered rings.


ASTM D 36 Softening Point of Bitumen (Ring and Ball)


9418314 - MANUAL TESTER


40100 - RING & BALL NBA 440

941612 Hot plate (600 W)941723 Electric stirrer9418451 Ball centering guide for tapered or straight ring9418452 Ball centering guide for shouldered ring

941842 Tapered ring941843 Straight ring941844 Shouldered ring9911502 ASTM thermometer 15C9911503 ASTM thermometer 16C9911565 ASTM thermometer 113C

17487 Calibrated beaker20764 Straight rings (pack of 10)20765 Shouldered rings (pack of 10)25666 Conical rings (pack of 10)40103 Detection lamp

9920766 Balls (pack of 10)


9920766 Balls (pack of 10)

941614 heating element (600 W)

40138 Ring and ball craddle

40390 Printer paper Seyko DPU 414 (roll)

40139 Pt 100 probe for NBA 430/44040154 heating element (1000 W)

5



SCOPEThis test method covers the determination of the flash point, by tag manualand automated closed testers, of liquids with a viscosity below 9.5 cst at25°C and a flash point below 93°C.

REF. 40600The NTA 440 model, fully automatic tester, is equipped with ticket printer,cup and cover, cup support, Pt 100 probe, detection cable and gas tubing.

OPTIONAL ACCESSORY


ASTM D 56 Flash Point by Tag Closed Tester


40600 - TAG CLOSED TESTER NTA 440

SCOPEThis test method covers the determination of the specific gravity and den-sity of semi-solid bitumous materials, asphalts cements, and soft tar pitchesby use of a pycnometer.

OTHER STANDARDSNFT 66007

REF. 9924615Thermostatic bath

NECESSARY ACCESSORIES

OPTIONAL ACCESSORIES

ASTM D 70 Density of Semi-Solid Bitumous Materials(Pycnometer Method)

9923203 Cryostat TLC 30 - 5 liters (-30/+60°C ±.1)9923204 Cryostat TLC 40 - 11 liters (-45/+20°C ±.05)

40602 Pt 100 probe 40603 Set of fuses40605 Heating elements (set of 4)40610 TAG cup40612 Detection cable

9911532 ASTM thermometer 63C

20847 Pycnometer A ( 24/30 ml)23229 Pycnometer C ( 24/30 ml)23230 Pycnometer D ( 24/30 ml)24624 Pycnometer B ( 24/30 ml)

230 V2.2 A50 Hz18 Kgw 260 mmd 535 mmh 500 mmon request115V 60Hz


PYCNOMETER

40390 Printer paper Seyko DPU 414 (roll)40380 Electric ignitor

6



See other applications under ASTM D 850 - D 1078

SCOPEThis test method covers the distillation of natural gasolines, motor gasiolines,aviation gasolines, aviation turbine fuels, special boiling point spirits, naphtas,white spirit, kerosines, gas oils, distillate fuel oils, and similar petroleumproducts, utilizing either manual or automated equipment.

OTHER STANDARDSIP 123 - NFM 07002 - ISO 3405 - DIN 51751

REF. 941227“Front View” distillation apparatus, single unit (receiver on left), with electricheater and temperature control by variotronic, complete with 2 thermom-eters and Ceran board 38 mm.

REF. 941228“Front View” distillation apparatus, single unit (receiver on right), with elec-tric heater and temperature control by variotronic, complete with 2 ther-mometers and Ceran board 38 mm.

ACCESSORIES


ASTM D 86 Distillation of Petroleum Products

See overleaf


941228 - FRONT VIEW DISTILLATION (right)

19425 100 ml graduated receiver (D86)20348 Ceran board hole 50 mm24019 125 ml distillation f lask (D86)

941251 Glass cooling bath (2l)

19425 100 ml graduated receiver (D86)20348 Ceran board hole 50 mm24019 125 ml distillation f lask (D86)

941238 Heating element (1000W)9911494 ASTM thermometer 7C9911495 ASTM thermometer 8C

40049 Silicone stopper for condenser (pack of 50)40050 Silicone stopper thermometer (pack of 50)


40078 Karanape board (38 mm)40079 Karanape board (32 mm)


19422 200 ml dis tillation f las k (D850)

19422 200 ml distillation f lask (D850)

7



REF.40000Model NDI 440, automatic stand alone unit operable through PC keyboardand standard 14” colour screen or alternatively connectable to external ex-isting Pentium PC with Windows software. Basic unit with distillation flasksand CERAN boards as per mentioned methods, 100 ml receiver, 5 ml resi-due receiver, sensor adjuster, Pt 100 sensor, automatic dry point kit andmore.

MAIN CONSUMABLES

REFERENCE FLUID (see page 74)



40000 - DISTILLATION AUTO NDI 440

ASTM D 86 continued

19096 Seepage f ingers (pack of 10)19420 100 ml distillation f lask (D86)19422 200 ml distillation f lask (D850)24019 125 ml distillation f lask (D86)26111 100 ml graduated receiver glass foot (D86)40052 125 ml black bottom f lask40065 Tef lon centering stopper for Pt 100 probe40067 Tef lon centering stopper for dry point40073 Dry point thermocouple40078 Karanape board (38 mm)40079 Karanape board (32 mm)

12609 5 ml graduated cylinder for residue (D86)20348 Ceran board hole 50 mm21944 Ceran board hole 100 mm24019 125 ml distillation f lask (D86)27581 Ceran board hole 25 mm (benzene-toluene D850)

40049 Silicone stopper for condenser (pack of 50)40076 Pt 100 f lask temperature measuring probe

40043 200 ml black bottom f lask (D1078)



40390 Printer paper Seyko DPU 414 (roll)941238 Heating element (1000W)

40097 Maintenance kit for ND I440

8



ASTM D 91 Precipitation Number of Lubricating Oil


9412920 - OIL TEST CENTRIFUGE

See other applications under ASTM D 96 - D 893 - D 1796 - D 2273 - D 2709 - D 2711 - D 4007

SCOPEThis test method covers the determination of the precipitation number ofsteam cylinder stocks and black oils, and can be used for other lubricatingoils.

REF. 9412911This model without cooling/heating control is for ASTM D 91, D 893,D 2273, D 2709 and D 2711. The model includes rotor, bucket and adapt-ers for 6 conical tubes 8” and 8” traces.

REF. 9412920This model with heating control up to 60°C for all standards (D96 to D4007).The model includes rotor, bucket and adapters for 6 conical tubes 8” and 8”traces.

ACCESSORIES (various)


See other application under ASTM D 244

SCOPEThis test method covers the empirical procedures for determining the SayboltUniversal or Saybolt Furol Viscosities of petroleum products at specifiedtemperatures between 21 and 99°C.

QUOTATION ON REQUEST

ASTM D 88 Saybolt Viscosity

941297 8" cone-shaped tube (100 ml)941298 8" traces cone-shaped tube (100 ml)9413120 Support to hold 20 cone-shaped tubes

9412932 Rotor for conical tubes 8” and 8” traces

941298 8" traces cone-shaped tube (100 ml)941297 8" cone-shaped tube (100 ml)

230 V3.5 A50 Hz140 Kgw 800 mmd 700 mmh 420 mm

941299 Driv ing belt type 5M (875 mm)941300 carbon brushes (pack of 2)

941220 Constant temperature w ater bath (max 100°C)

9



SCOPEThis test method describes the determination of the flash point of petro-leum products by a manual or automated cleveland open cup apparatus.

OTHER STANDARDSIP 36 - NF EN 22592 - ISO 2592

MANUAL INSTRUMENTREF. 941611This manual model NCL 110 includes cup and thermometer.


SEMI-AUTOMATIC INSTRUMENTREF. 941610 ON REQUESTThe semi-automatic tester NCL 210 is equipped with electronic regulator,Pt 100 and cup. The temperature slope is automatically controlled.

AUTOMATIC INSTRUMENTREF. 40400The fully automatic tester NCL 440 is equipped with ticket printer, Pt 100,cup, detection cable, gas tubing and RS232C output. It is provided withgas and electrical ignition system.

OPTIONAL ACCESSORY



ASTM D 92 Flash and Fire Points by Cleveland Open Cup


941611 - CLEVELAND MANUAL NCL 110



40400 - CLEVELAND AUTOMATIC NCL 440


40440 - CLEVELAND WITH SAMPLER

941613 Cleveland cup w ith handle



230 V0.3 A50 Hz5.6 Kgw 180 mmd 280 mmh 280 mm

40440 6 cups automatic sampler

40417 Standard Cleveland cup

40441 Pt 100 probe

40437 Insulated plate - f ixed

40443 Ionization ring f lash point40444 Ionization ring f ire point

40439 Insulated plate - mobile


40390 Printer paper Seyko DPU 414 (roll)40380 Electric ignitor40154 heating element (1000 W)

10



SCOPEThis test method covers the determination of the flash point of petroleumproducts in the temperature range from 40 to 360°C by manual or auto-mated Pensky-Martens closed cup apparatus.

OTHER STANDARDSIP 34 - NF M07019 - ISO 2719 - DIN 51758

MANUAL INSTRUMENTREF. 941616The model NPM 110/A, manual instrument, is delivered complete with cupand cover, thermometer and stirrer. This model follows method A.

REF. 941617The model NPM 110/B, manual instrument, is delivered complete with cupand cover, thermometer and stirrer. This model follows method B.


SEMI-AUTOMATIC INSTRUMENTREF. 941618The model NPM 210/A, semi-automatic instrument, is delivered completewith cup and cover, Pt100 probe and stirrer. The temperature slope is auto-matically controlled. This model follows method A.

REF. 941619The model NPM 210/B, semi-automatic instrument, is delivered completewith cup and cover, Pt100 probe and stirrer. The temperature slope is auto-matically controlled. This model follows method B.


AUTOMATIC INSTRUMENTREF. 40300The NPM 440 model, fully automatic tester, is complete with cupand cover,Pt 100 probe, flexible stirrer, gas or electrical ignition system, PC serial portand ticket printer. Software allows choice of 6 methods, automatic baro-metric correction, full safeties, 2 stirring speeds, ...

OPTIONAL ACCESSORY



ASTM D 93 Flash Point by Pensky-Martens Closed Cup


40300 - PENSKY-MARTENS AUTO NPM 440

40349 Stirring connection cable40351 Detection cable

40346 Cup for NPM 44040347 Cover w ithout probe for NPM 440

40353 Pt 100 for NPM 440


14110 tube for propane gas 6x12 mm (10 m)


941616 - PENSKY-MARTENS MANUAL NPM 110

230 V4 A50 Hz7.5 Kgw 350 mmd 260 mmh 300 mm


941618-PENSKY-MARTENS SEMI-AUTO NPM 210

230 V4 A50 Hz7.5 Kgw 350 mmd 260 mmh 300 mm

40380 Electric ignitor40390 Printer paper Sey ko DPU 414 (roll)

941621 Heating cartridge 230V

941620 Heating element 230V

9900903 ASTM thermometer 9C w ith collar9901003 ASTM thermometer 10C w ith collar

9411930 Cup for NPM 110 and 2109411931 Cover for NPM 110 and 210

9411930 Cup for NPM 110 and 2109411931 Cover for NPM 110 and 210

997444 Gloves (pair)


9417908 Pt 100 probe (70x3 mm)

11



SCOPEThis test method covers the determination of water in petroleum products,tars, and other bitumous materials by the distillation method.

OTHER STANDARDSIP 74 - NFT 60113 - ISO 3733

REF. 21454This model complete delivered with electric heater.


ASTM D 95 Water in Petroleum Products and BitumousMaterials by Distillation

See instrument under ASTM D 91

SCOPEThis test method covers the centrifuge method for determining sedimentand water in crude oil during field custody transfers.

ASTM D 96 Water and Sediment in Crude Oil byCentrifuge Method

12852 Round bottom f lask CN24/29 (500 ml)13142 Liebig condenser CN24/29 (400 mm) 14571 Heating mantle 500 ml16252 Clamp16324 Stand w ith rod 12 x 800 mm16329 Universal bosshead for assembly19357 Dean Stark trap (10ml in 0.1)21003 Pulse regulator (2200 W)21455 5 ml : 1/10 Dean Stark w ith round bottom21456 25 ml : 1/5 Dean Stark w ith conical bottom

12



51000 Monitoring computer for analyser


SCOPEThis test method is intended for use on any petroleum product.


REF. 941584Model with single temperature bath with 5 wells, stirrer and6 thermometers 5C. Cooled by dry ice.

ACCESSORY

REF. 941592Cloud and pour test cabinet, mechanically refrigerated by CFC free gases,4 compartments (0, -17, -34, -51 °C), each with 4 sleeves including testtubes, felts, 15 thermometers 5C and 5 thermometers 6C.



REF. 51032The NTE 452 allows automated determination of cloud and/or pourpoint . This double-unit analyser is equipped with sample holderautomate, detectors and optical fibers and an integrated cooling unit (+30to - 70 °C). Monitoring is achieved by Windows (c) friendly software.

REF. 51031Same as 51032 but single place.

ALTERNATIVES



ASTM D 97 Pour Point of Petroleum Products


941592 - CLOUD / POUR CABINET (0 to -51°C)

99597 Dry ice machine

9415901 Felt disc (pack of 10)9415902 Felt ring (pack of 10)9911492 ASTM thermometer 5C9911493 ASTM thermometer 6C9911530 ASTM thermometer 61C

230 V16 A50 Hz190 Kgw 1000mmd 750 mmh 1420 mm



51032 - CLOUD & POUR POINT NTE 452

19439 Test tube

51011 Analyser (1 pl.) for D250051012 Analyser (2 pl.) for D250051021 Analyser (1 pl.) for D9751022 A naly s er (2 pl.) f or D97

21147 Sample tube w ith mirror for c loud & pour

21146 Sample tube f or pour

51116 Pow er s olid s tate relay

13



See other application under ASTM D 240 - D 808

SCOPEThis test method covers the determination of sulfur in petroleum products,including lubricating oils containing additives, additive concentrates, and lu-bricating greases that cannot be burned completely in a wick lamp.

OTHER STANDARDSIP 61 - NFT 60109 - DIN 51577


ASTM D 129 Sulfur in Petroleum Products(general Bomb Method)

SCOPEThe ductility of a bituminous material is measured by the distance to whichit will elongate before breaking when two ends of a briquet specimen of thematerial are pulled apart at a specified speed and temperature.

OTHER STANDARDSNFT 66006 - DIN 52013

REF. 9418641Ductility machine new design with electronic regulation and digital displaymeasurement, for three simultaneous tests at variable speeds of 1 to 99mm/min by step of .1 mm, maximum pull length : 100 cm

REF. 9418642Ductility machine new design with electronic regulation and digital displaymeasurement, for three simultaneous tests at variable speeds of 1 to 99mm/min by step of .1 mm, maximum pull length : 150 cm

ACCESSORY


ASTM D 113 Ductility of Bituminous Materials


9418641 - DUCTILITY MACHINE (1 meter)

99868 Mould w ithout brass plate99869 Brass plate



941866 Opal glass for ductility meter 100 cm 941865 Opal glass for ductility meter 150 cm

9923203 Cry os tat TLC 30 - 5 liters (-30/+60°C ±.1)

14



SCOPEThis test method covers the detection of the corrosiveness to copper ofaviation gasoline, aviation turbine fuel, automotive gasoline, natural gaso-line or other hydrocarbons having a Reid vapor pressure no greater than 18psi.


REF. 941220constant temperature test bath with plain cover and drain cock, controlledby electronic thermostat, Pt 100 sensor and led heating control(max 100°C).

NECESSARY ACCESSORIES FOR ASTM D 130



NECESSARY ACCESSORIES FOR IP 227


ASTM D 130 Detection of Copper Corrosion fromPetroleum Products


941220 - TEST BATH FOR D130


941220 - TEST BATH FOR IP 227

12780 Test tube 25x150mm 99486 Multistrip polishing vise99493 Copper strip corrosion test standard941485 Copper strip (pack of 24)941491 Flat glass test tube941492 Test cylinder994871 Silicon carbide paper 240 grits (pack of 10)9413109 Support to hold 9 stainless steel vessel9413125 Support to hold 25 test tubes9911499 ASTM thermometer 12C9922505 Silicon carbide pow der 150 mesh (1 kg)

941491 Flat glass test tube941492 Test cylinder

9414920 O'ring seals (pack of 10)

9922505 Silicon carbide pow der 150 mesh (1 kg)

12780 Test tube 25x150mm

941224 Cover including 3 test tubes (amber) 994851 Silver strip assaying at 99,9%

994931 Silver strip corrosion standard

9414883 Craddle (amber glass)9911499 ASTM thermometer 12C

994851 Silver strip assaying at 99,9%

9414883 Craddle (amber glass)


9414881 Test tube (amber glass)9414882 Condenser (amber glass)



99486 Multistrip polishing vise

9414881 Test tube (amber glass)9414882 Condenser (amber glass)

9922505 Silicon carbide pow der 150 mesh (1 kg)

994871 Silicon carbide paper 240 grits (pack of 10)

9417900 Pt 100 probe (30x6 mm)

9417900 Pt 100 probe (30x6 mm)

9412209 Heating element (1500 W)


15




SCOPEThis test method covers the determination of the amount of carbon residueleft after evaporation and pyrolisis of an oil. It is intended to provide someindication of relative coke-forming propensities. The method is generallyapplicable to relatively non volatile petroleum products which partially de-compose on distillation at atmospheric pressure.

OTHER STANDARDSNFT 60116 - IP 13 - ISO 6615 - DIN 51551

REF. 941653This model, single unit complete except gas burner is intended to be usedmanually. It includes porcelain crucible, skidmore crucible with cover, steelouter crucible with lid, support triangle, holder, chimney stand.

ACCESSORY


ASTM D 189 Conradson Carbon Residue of PetroleumProducts


941653 - CARBON RESIDUE APPARATUS

SCOPEThis test method covers the determination of the color of refined oils suchas undyed motor and aviation gasoline, jet propulsion fuels, naphtas andkerozine, and, in addition, petroleum waxes and pharmaceutical white oils.

OTHER STANDARDSNFM 07003 - DIN 51411

REF. 941520Complete improved model with the daylight source built-in the base and a3-position turret assembly (½, 1 and 2) with certified Saybolt filters reducingthe time required to make a determination and eliminating the handling ofthe standard filters and the possibility of loss and damage.



AUTOMATIC APPARATUSREF. 9929006 ON REQUESTThe Lovibond PFX 880/P is an easy to use, automatic instrument, whicheliminates time-consuming procedures of visual methods. It is a spectro-photometer for objective colour analysis of petroleum fuels, oils, waxesand petrochemicals according to the Saybolt and ASTM Colour scales

ASTM D 156 Saybolt Color of Petroleum Products


941520 - SAYBOLT CHROMOMETER

941523 Wax tube w ith heater (pow er supply not included)9925975 Pow er supply for w ax tube 230V / 12V

941524 Prismatic eyepiece941522 Gaskets for graduated tube (pack of 12)941525 Matched pair of tubes9415203 Artif ic ial daylight f ilter w ith certif icate995206 Spare bulb9415240 Filter w heel w ith certif icate

9927083 Meker gas burner (butane/propane)

99661 Skidmore crucible w ith brass lid99664 Steel outer crucible99665 Metallic hollow ring99666 Chimney w ith guide9915150 Porcelain Conradson crucible (pack of 12)

10702 Glass balls diam. 2mm (1 kg)


8 Kgw 250 mmd 250 mmh 500 mm

16




SCOPEThese test methods and practices, given under the headings titled Compo-sition, Consistency, Stability, and Examination of residue, cover the exami-nation of asphalt emulsions composed principally of a semisolid or liquidasphaltic base, water and an emulsifying agent.

ASTM D 244 Standard Test Methods and Practices forEmulsified Asphalts

ASTM D 217 Cone Penetration of Lubricating Grease

See instruments under ASTM D 5

SCOPEThis test method covers four procedures for measuring the consistency oflubricating greases by the penetration of a cone of specified dimension,mass, and finish. The penetration is measured in 1/10 of a millimeter.


ASTM D 240 Heat of Combustion of Liquid HydrocarbonFuels by Bomb Calorimeter


SCOPEThis test method covers the determination of the heat of combustion ofliquid hydrocarbon fuels ranging in volatillty from that of light distillates tothat of residual fuels.

17



See other applications under ASTM D 941 - D 1217 - D 1298 - D1480

SCOPEThis test method covers the determination by means of a glass hydrometerof the API gravity of crude petroleum and petroleum products normally han-dled as liquids and having a Reid vapor pressure no greater than 26 psi.

OTHER STANDARDSISO 3675

REF. 14854 ON REQUEST6-unit ramp in stainless steel

ACCESSORIES (for all standards)

ACCESSORIES (ASTM D287)




ASTM D 287 API Gravity of Crude Petroleum andPetroleum Products (Hydrometer Method)

10013 Spare glassw are w ith cock10741 Density cylinder 500 ml9915287 AFNOR thermometer, -15 to +45°C9915288 AFNOR thermometer, +35 to +85°C

9920800 Hydrometer API 1H / -1 to 119920801 Hydrometer API 2H / 9 to 219920802 Hydrometer API 3H / 19 to 319920803 Hydrometer API 4H / 29 to 419920804 Hydrometer API 5H / 39 to 519920805 Hydrometer API 6H / 49 to 619920806 Hydrometer API 7H / 59 to 719920807 Hydrometer API 8H / 69 to 819920808 Hydrometer API 9H / 79 to 919920809 Hydrometer API 10H / 89 to 101

19386 Lipkin density bottle

19393 25 ml Bingham density bottle

9920810 Hydrometer (L50) / 0,600-0,6509920811 Hydrometer (L50) / 0,650-0,7009920812 Hydrometer (L50) / 0,700-0,7509920813 Hydrometer (L50) / 0,750-0,8009920814 Hydrometer (L50) / 0,800-0,8509920815 Hydrometer (L50) / 0,850-0,9009920816 Hydrometer (L50) / 0,900-0,9509920817 Hydrometer (L50) / 0,950-1,0009920818 Hydrometer (L50) / 1,000-1,0509920819 Hydrometer (L50) / 1,050-1,1009920820 Thermohydrometer API 51H / -1 to 119920821 Thermohydrometer API 52H / 9 to 219920822 Thermohydrometer API 53H / 19 to 319920823 Thermohydrometer API 54H / 29 to 419920824 Thermohydrometer API 55H / 39 to 519920825 Thermohydrometer API 56H / 49 to 619920826 Thermohydrometer API 57H / 59 to 719920827 Thermohydrometer API 58H / 69to 819920828 Thermohydrometer API 59H / 79 to 919920829 Thermohydrometer API 60H / 89 to 101

18



SCOPEThis test method covers the determination of the amount of dilution in crank-case oils of engines when gasoline has been used has the fuel.

OTHER STANDARDSIP 23 - DIN 51565

REF. 9916683Complete tester with electric heating


ASTM D 322 Gasoline Diluent in Used Gasoline EngineOils by Distillation

12852 Round bottom f lask CN24/29 (500 ml)13142 Liebig condenser CN24/29 (400 mm)

16252 Clamp16324 Stand w ith rod 12 x 800 mm16329 Universal bosshead for assembly

21003 Pulse regulator (2200 W)

14572 Heating mantle w ith feeder cable

17966 Trap CN24/29 (5 ml)

19



SCOPEThis test method covers procedures for the determination of vapor pres-sure of gasoline, volatile crude oil, and other volatile petroleum products.

OTHER STANDARDSIP 69 - NFM 07007 - ISO 3007 - EN 12

REF. 941432Electronic constant thermostatic bath, 3 vessels capacity, with thermom-eter and digital display. Equipped with adjustable stirring device, low watercut-off, cooling coil for external cryostat and drain cock.

REID VESSELS WITH SCREW COUPLING

REID VESSELS WITH QUICK COUPLING

REID VAPOUR PRESSURE GAGES (psi and KPa)



ASTM D 323 Vapor Pressure of Petroleum Products(Reid Method)


941432 - THERMOSTATIC BATH (3 place)


941411 - VESSEL WITH QUICK COUPLING


941401 - VESSEL WITH SCREW COUPLING

941401 RVP screw coupling test vessel (below 26 lb)941405 RVP screw coupling test vessel (above 26 lb)

941411 RVP quick coupling test vessel (below 26 lb)941415 RVP quick coupling test vessel (above 26 lb)

99420 Metallic manometer 0 to 5 psi/34 kPa99421 Metallic manometer 0 to 15 psi/100 kPa99422 Metallic manometer 0 to 45 psi/300 kPa99423 Metallic manometer 0 to 60 psi/400 kPa99424 Metallic manometer 0 to 100 psi/650 kPa994211 Metallic manometer 0 to 30 psi/200 kPa

941410 Safety burst disk capsule (add on vessel price)9925755 Mercury manometer9414283 Connection for mercury manometer

941402 A ir chamber (screw )941403 Gasoline chamber w ith one opening (screw )941407 Gasoline chamber w ith tw o valves (screw )

941427 Tef lon gaskets for test vessel (pack of 24)

9414101 Spare disc for safety capsule941435 Heating element (2000 W)

941412 A ir chamber (q. coupling)941413 Gasoline chamber w ith one opening (q. coupling)941417 Gasoline chamber w ith tw o valves (q. coupling)


9417905 Pt 100 probe (250x5 mm)

20



SCOPEThis test method covers the determination of the existent gum content ofaviation fuels, and the gum content of motor gasolines or other volatile dis-tillates in their finished form, and at the time of test.


REF. 941302This model, air jet only with 5 wells, includes electronic temperature controland flowmeter, thermometer 3C, beakers, conical outlets.

REF. 941303This model, air and steam jet with 5 wells, includes electronic temperaturecontrol and flowmeter, steam superheater, thermometer 3C, beakers, conicaloutlets.

ACCESSORIES


aluminium block calibration kit superheater

ASTM D 381 Existent Gum in Fuels by Jet Evaporation


941303 - AIR AND STEAM JET GUM BATH


941308 - STEAM GENERATOR


941302 - AIR JET GUM BATH


9413080 - AIR COMPRESSOR


941301 - CALIBRATION KIT

941308 Steam generator (400V - 3 ph)

941301 A ir calibration kit for 941302/941303941304 Vapour calibration kit for 941303

9413080 A ir compressor 2 stages 300 l (400V - 3 ph)

12875 Filter funnel 125 ml

941305 Beaker 100 ml941306 Conical air outlet

9413031 Superheater for 941303 apparatus




400 V - 3ph20 A50 Hz75 Kgw 750 mmd 530 mmh 920 mm

400 V - 3 ph7 A50 Hz125 Kgw 760 mmd 600 mmh 1670 mm


941307 Overpressure pump for steam generator

9417900 Pt 100 probe (30x6 mm)9417904 Pt 100 probe (160x5 mm)

9417834 Pt 100 probe (60x3.15 mm)

9413023 Heating element for metallic bath997444 Gloves (pair)

21



ASTM D 445 Kinematic Viscosity of Transparent andOpaque Liquids

SCOPEThis test method specifies a procedure for the determination of the kin-ematic viscosity of liquid petroleum products, both transparent and opaque,by measuring the time for a volume of liquid to flow under gravity through acalibrated glass capillary viscometer.

OTHER STANDARDSIP 71 - ISO 3104 - DIN 51366

REF. 941121Constant temperature viscosity bath “ROUTINE” (max. 100°C) with glassjar of 20 liters, digital temperature display and 5 places for commonviscometers (support not included).

REF. 941122Constant temperature viscosity bath “ROUTINE” (max. 100°C) with glassjar of 30 liters, digital temperature display and 5 places for commonviscometers (support not included).

REF. 941131Constant temperature viscosity bath “PRECISION” (max. 120°C) with glassjar of 30 liters, electronic digital temperature control and 8 places for com-mon viscometers (support not included).





REF.18450VISCOMETER WASHER apparatus supplied with 6 nozzle stoppers. Thisapparatus allows for external and internal washing of all current types ofviscometer tubes. The viscometer tubes are suspended in BIOSANE T215solvent vapors at 80°C.- Very fast cleaning for 6 viscometer tubes in 5 to 15 min- Negligible solvent consumption


RECOMMENDED SOLVENT

See overleaf


941121 - VISCOSITY BATH (5 places)


941131 - VISCOSITY BATH (8 places)9411310 Suspension cover for Ubbelohde (screw )9411313 Suspension cover for Cannon-Fenske (screw )

9913539 Support for 6 v iscometer tube941129 Support base w ith illuminator for 941121/1229411232 Cooling coil for 941121and 9411229916419 Silicone oil up to 150°C (5 l)9916427 Mineral oil max 100°C (5 l)9921375 Electronic stopw atch

9916419 Silicone oil up to 150°C (5 l)9916427 Mineral oil max 100°C (5 l)9921375 Electronic stopw atch

941132 Heating element for ref . 941131 (2000 W)




18450 - AUTOMATIC VISCOMETER WASHER



9417904 Pt 100 probe (160x5 mm)9411302 Borosilicate glass jar(300 x 450 mm)9411301 Borosilicate glass jar (300 x 300 mm)

21694 Heating controller 18455 Glass c leaning bath18454 Injector stopper18453 Heating element

9925699 Biosane T215 solvent (5 l)

22



1. Ubbelohde viscometer for transparent liquids

2. Cannon-fenske routine viscometer for transparent liquids

3. Cannon-fenske reverse flow viscometer for opaque liquids

4. BS / IP U RF viscometer for opaque liquids

ALL ABOVE VISCOMETERS CAN BE SUPPLIEDWITHOUT CERTIFICATE ON SPECIAL REQUEST

See overleaf

ASTM D 445 continued

VISCOMETER TUBES (all with calibration certificate)

2. Cannon-fenske

1. Ubbelohde

3. Cannon-fenske

4. BS / IP U RF

14030 0,3 to 1 cSt - s ize 014031 0,6 to 3 cSt - s ize 0C14032 1 to 5 cSt - s ize 0B14034 2 to 10 cSt - s ize 114035 6 to 30 cSt - s ize 1C14036 10 to 50 cSt - s ize 1B14037 20 to 100 cSt - s ize 214038 60 to 300 cSt - s ize 2C14039 100 to 500 cSt - s ize 2B14041 200 to 1000 cSt - s ize 314042 600 to 3000 cSt - s ize 3C14043 1000 to 5000 cSt - size 3B14044 2000 to 10000 cSt - s ize 414045 6000 to 30000 cSt - s ize 4C13993 10000 to 50000 cSt - s ize 4B13994 20000 to100000 cSt - s ize 5

14002 0,4 to 2 cSt - s ize 2514003 0,8 to 4 cSt - s ize 5014004 1,6 to 8 cSt - s ize 7514005 3 to 15 cSt - s ize 10014006 7 to 35 cSt - s ize 15014007 20 to 100 cSt - s ize 20014008 50 to 200 cSt - s ize 30014009 100 to 500 cSt - s ize 35014010 240 to 1200 cSt - s ize 40014011 500 to 2500 cSt - s ize 45014012 1600 to 8000 cSt - size 50014013 4000 to 20000cSt - s ize 60014014 10000 to 40000 cSt14015 20000 to 80000 cSt

14016 0,4 to 2 cSt - s ize 2514017 0,8 to 4 cSt - s ize 5014018 1,6 to 8 cSt - s ize 7514019 3 to 15 cSt - s ize 10014020 7 to 35 cSt - s ize 15014021 20 to 100 cSt - s ize 20014022 50 to 200 cSt - s ize 30014023 100 to 500 cSt - s ize 35014024 240 to 1200 cSt - s ize 40014025 500 to 2500 cSt - s ize 45014026 1600 to 8000 cSt - size 50014027 4000 to 20000cSt - s ize 60014028 10000 to 40000 cSt14029 20000 to 80000 cSt

18670 0.6 to 3 cSt - s ize 118671 2 to 10 cSt - s ize 218672 6 to 30 cSt - s ize 318673 20 to 100 cSt - s ize 418674 60 to 300 cSt - s ize 518675 200 to 1000 cSt - s ize 618676 600 to 3000 cSt - s ize 718677 2000 to 10000 cSt - s ize 818678 6000 to 30000 cSt - s ize 918679 20000 to 100000 cSt - s ize 1018680 60000 to 300000 cSt - s ize 11

23



5. Houillon viscometer for transparent liquids

6. BS / IP SL viscometer for transparent liquids

7. S.I.L. viscometer for transparent liquids

8. BAUME VIGNERON viscometer for transparent liquids

9. CANNON MANNING VACUUM viscometer for bitumen



VISCOMETER TUBES (all with calibration certificate)

8. BAUME VIGNERON

9. CANNON MANNING VACUUM

7. S.I.L.

6. BS / IP SL

See overleaf

5. Houillon

13932 3.2 cSt13933 6.4 cSt13934 12 cSt13935 28 cSt13936 80 cSt13937 200 cSt13938 400 cSt13939 960 cSt13940 2000 cSt

19283 10 cSt19284 30 cSt19285 100 cSt19286 300 cSt19287 1000 cSt19288 3000 cSt19289 10000 cSt19290 30000 cSt19291 100000 cSt

19631 3 cSt19632 10 cSt19497 30 cSt19498 100 cSt19499 300 cSt19500 1000 cSt19501 3000 cSt19502 10000 cSt

14740 0.63 cSt14741 1 cSt14742 1,6 cSt14743 2.5 cSt14744 4 cSt14745 6.3 cSt14746 10 cSt14747 15 cSt14748 25 cSt14749 40 cSt14750 63 cSt14751 100 cSt14752 160 cSt14753 250 cSt14754 400 cSt14755 630 cSt14756 1000 cSt14757 1600 cSt14758 2500 cSt14759 4000 cSt14760 6300 cSt

18892 0.8 cSt18893 2.4 cSt18894 8 cSt18895 24 cSt18896 80 cSt18897 240 cSt18898 800 cSt18899 2400 cSt18900 8000 cSt18901 24000 cSt18902 80000 cSt

24



10. CANNON UBBELOHDE viscometer for transparent liquidswithout connection to washer

11. CANNON UBBELOHDE viscometer for transparent liquidswith connection to washer


12. VISCOSITY STANDARDS (1 pint)

ALL WITH UKAS CERTIFICATE

REF. Std 25°C 40°C 100°Cmm²/s 77°F 104°F 212°F

9917400 S3 4.0 2.9 1.29917401 S6 8.9 5.7 1.89927495 N10 17 10 2.79917402 S20 34 18 3.89927494 N35 66 32 5.39917403 S60 120 54 7.39920752 N100 230 97 119917404 S200 460 180 169925968 N350 850 310 239917405 S600 1600 520 339927707 N1000 2400 940 ---9917406 S2000 5900 1700 699925969 N4000 12000 3400 ---9917407 S8000 25000 6700 ---9925970 N15000 47000 13000 ---9917408 S30000 89000 23000 ---

VISCOMETER TUBES FOR AUTOMATIC VISCOMETER

10. CANNON UBBELOHDE

11. CANNON UBBELOHDE


15253 0.003 (approx. constant)15255 0.005 (approx. constant)15256 0.01 (approx. constant)15257 0.03 (approx. constant)15259 0.1 (approx. constant)15260 0.3 (approx. constant)15263 1 (approx. constant)15264 3 (approx. constant)15266 10 (approx. constant)

22882 0.005 (approx. constant)22883 0.003 (approx. constant)22884 0.01 (approx. constant)22885 0.03 (approx. constant)22886 0.1 (approx. constant)22887 0.3 (approx. constant)22888 1 (approx. constant)22889 3 (approx. constant)22890 10 (approx. constant)

25



SCOPEThis test method covers the determination of sediment in crude oils andfuels oils by extraction with toluene.


REF. 941281Extraction apparatus consisting of erlenmeyer extraction flask, 1000ml ca-pacity, block-tin coil condenser, water cup and extraction thimble suspendedby means of a corrosion resistant wire.

ACCESSORY


ASTM D 473 Sediment in Crude Oils and Fuel Oils by theExtraction Method


941281 - EXTRACTION APPARATUS

9412813 Water cup w ith glass hook9412831 Extraction f lask (1 litre)

941282 Condenser

99283 Extraction thimble (alundum)


941612 Hot plate (600 W)

99284 Extraction basket

26




SCOPEThis test method covers the determination of ash in the range 0.001-0.180mass %, from distillate and residual fuels, gas turbine fuels, crude oils, lu-bricating oils, waxes, and other petroleum products, in which any ash-form-ing materials present are normally considered to be undesirable impuritiesor contaminants.

OTHER STANDARDSIP 4

ASTM D 482 Ash from Petroleum Products

SCOPEThis test method covers the determination of the amount of carbon residueleft after evaporation and pyrolysis of an oil, and is intended to providesome indication of relative coke-forming propensity.


REF. 941671This model with 5 wells and control bulb does not include test accessories.



ASTM D 524 Ramsbottom Carbon Residue of PetroleumProducts


941671 - RAMSBOTTOM CARBON TESTER

REF. 23963Muffle furnace model L3/11 with a capacity of 3 liters and max. temperatureof 1100 °C.

NECESSARY ACCESSORIES (for D482)

NECESSARY ACCESSORIES (for D874)


99675 10 ml syringe w ith needie941673 Filling device for glass coking bulb941678 Glass coking bulb

99675 10 ml syringe w ith needie941674 Control bulb w ith thermocouple



991307 Platinum crucible (100 ml)

10532 Porcelain dish,100 ml,f lat bottom (pack of 6 )10687 Stainless curved crucible tong (pack of 2)10702 Glass balls diam. 2mm (1 kg)10770 Porcelain plate for below dessicator10771 Soda lime glass dessicator, button cover

10508 Porcelain crucible, 54 ml tall form (pack of 6 )10509 Porcelain crucible, 80 ml tall form (pack of 6 )10510 Porcelain crucible,130 ml tall form (pack of 6 )10515 Porcelain crucible, 80 ml low form (pack of 6 )10532 Porcelain dish,100 ml,f lat bottom (pack of 6 )10687 Stainless curved crucible tong (pack of 2)10702 Glass balls diam. 2mm (1 kg)10770 Porcelain plate for below dessicator10771 Soda lime glass dessicator, button cover15377 Silica crucible (50 ml tall form)15386 Silica crucible (75 ml low form)15387 Silica crucible (130 ml low form)15671 Platinum crucible (50 ml)

991304 Set of heating elements 991308 Thermocouple K (160mm)


23963 - MUFFLE FURNACE


941675 Thermocouple assembly (furnace + safety)

27



See other applications under ASTM D 873

SCOPEThis test method covers the determination of the stability of gasoline infinished form only, under accelerated oxidation conditions.


AUTOMATIC EQUIPMENT MODEL NPI 420REF. 40925 (for D525 and D873)4-unit automatic Potential gums & Induction period tester model NPI 442,including metallic bath , direct pressure measurement in the test vessel,over-pressure safety by certified bursting disk and quick coupling, trackingof pressure, pressure drop and break-point on printer or PC, supplied withplotter and filling accessory, but without test vessels, sample container, norPC software

REF. 40900 (for D525, D873)2-unit automatic Potential gums & Induction period tester model NPI 440,including liquid bath , direct pressure measurement in the test vessel,over-pressure safety by certified bursting disk and quick coupling, tracking ofpressure, pressure drop and break-point on printer or PC, supplied withplotter and filling accessory, but without test vessel, sample container andcover, nor PC software

REF. 40930The oxygen filling and decompression valve adapter model NPC 210 isdesigned for all type of potential gums and indiuction period bombs. The kitprovides the operator with a high level of safety.

NECESSARY ACCESSORIES (for D525 and D873)


MANUAL EQUIPMENTREF. 9413724 place water bath



ASTM D 525 Oxidation Stability of Gasoline(InductionPeriod Method)


40900 - LIQUID BATH NPI 440 (2 places)


40930 - OXYGEN FILLING CHAMBER NPC 210

40903 Stainless steel vessel w ith burst disk 40909 Filling and decompression (manual)40911 Stand for 2 vessels40933 Gaskets v iton for cylinder (pack of 10)941354 Glass test container941355 Cover for container

99362 Recording pressure gauge (2-pen) w ith tubings99365 Charts for recording gauge (pack of 100)941354 Glass test container941355 Cover for container9911509 ASTM thermometer 22C


30 Kgw 500 mmd 365 mmh 800 mm

9417902 Pt 100 probe (60x5 mm)


941372 - LIQUID BATH (4 place)


941373 Glass condenser9412209 Heating element (1500 W)9413621 Red Pen for recorder (pack of 5)9413622 Green Pen for recorder (pack of 5)

40903 Stainless steel vessel w ith burst disk 40909 Filling and dec ompres s ion (manual)



40933 Gaskets v iton for cylinder (pack of 10)

40913 Pt 100 probe for liquid bath40916 Heating element for liquid bath (1800 W)

40934 Pt 100 probe for dry bath40935 Heating cartridge for dry bath (4 x 200 W)

40919 Solid state relay for heating element


40925 - METALLIC BATH NPI 442 (4 places)


28



SCOPEThis test method covers the determination of the aniline point of petroleumproducts and hydrocarbon solvents.


REF. 41100Automatic Aniline Point Tester model NPA 410. Detection of clear to darksample by infrared detection.NO HANDLING OF ANILINE.

ACCESSORIES



REF. 40500Instrument model NAE 440 equipped with 2 independant station, heatingsystem by metallic bath (+10/+150 °C), automatic detection of clear, coloredand dark samples.



ASTM D 611 Aniline Point and Mixed Aniline Point of Pe-troleum Products and Hydrocarbon solvents


41100 - ANILINE POINT NPA 410


40500 - ANILINE POINT NAE 440

41104 2 ml v ials to crimp (pack of 1000) 41105 Crimp seal (pack of 500)41106 Hand crimper

41109 Thermocouple41117 Set of fuse




SCOPEThis test method covers the determination of the dropping point of lubricat-ing grease.



ASTM D 566 Dropping Point of Lubricating Grease

41121 heating cartridge 100W

41121 heating c artr idge 100W

29



ASTM D 613 Reference and Check Fuel Blending forOctane and Cetane Measurement


SCOPENABLEND series of automatic blending units have been designed to auto-mate the blending procedure for reference and check fuels used for octaneand cetane number measurement.Due to the flexibility of the software the instrument can be used for otherhydrocarbon blending purposes too where the accuracy and the speed ofthe blending procedure are critical.The units are operable locally from the embendded Windows CE basedtouch screen computer or can be remote controlled from any PC having aninternet browser installed over the local area network.The intranet technology software allows complete remote management andservice over the internet or phone line.The blending and calibration data being stored in an internal database, canbe accessed over the local area network.

REF. 52000Model NABLEND 8875 automatic stand alone unit with 2 fluid channels, forblending cetane reference fuels according ASTM D613 composed of twoblending components: nCetane, AMN or HMN, or U and T components.

REF. 52100Model NABLEND 8873 automatic stand alone unit with 3 fluid channels, forblending octane reference and check fuels according ASTM D2699 andASTM D2700 composed of three blending components: iso-octane, nor-mal heptane and toluene.

REF. 52200Model NABLEND 8877 automatic stand alone unit with 5 fluid channels, forblending octane and cetane reference and check fuels according ASTMD613, ASTM D2699 and ASTM D2700 composed of three blending com-ponents: iso-octane, normal heptane and toluene for octane and two blend-ing components: nCetane, AMN or HMN, or U and T components for cetane.

REF. 52300Model NABLEND 8877 automatic stand alone unit with 6 fluid channels, forblending octane and cetane reference and check fuels according ASTMD613, ASTM D2699 and ASTM D2700 composed of four blending compo-nents: iso-octane, normal heptane, 80/20 blend and toluene for octane andtwo blending components: nCetane, AMN or HMN, or U and T componentsfor cetane.

OPTIONAL ACCESSORY

MAIN CONSUMABLES



52000 - AUTOMATIC BLENDING UNIT

90-264 V0.8 A47-440 Hz270 Kgw 610 mmd 820 mmh 1650 mm

52001 Bottle, solvent resistant w ith cock (1l)

52001 Bottle, solvent resistant w ith cock (1l)

52002 Dosing pump

53000 explosion-proof drum pump

30



SCOPEThis test method covers procedures for the determination of acidic con-stituents in petroleum products and lubricants soluble or nearly soluble inmixture of toluene and propan-2-ol.

OTHER STANDARDSIP 177 - ISO 6619

REF. 941708neutralisation number apparatus by potentiometric titration, single unit, com-plete with pH test kit.


ASTM D 664 Acid Number of Petroleum Products byPotentiometric Titration


941708 - ACID NUMBER TESTER

941709 PH test kit9417082 Glass electrode (Beck. 39321) 9417083 Calomel electrode (Beck. 39420)9417085 Burette (10ml in 0,05 ml)9417086 250 ml beaker


31



ASTM D 665 Rust-Preventing Characteristics of InhibitedMineral Oil in Presence of Water

SCOPEThis test method is used to evaluate the ability of inhibited mineral oils,particularly steam-turbine oils, to aid in preventing the rusting of ferrousparts should water become mixed with the oil. This test method is alsoused for testing other oils, such as hydraulic oils and circulating oils.


REF. 9416306this improved 6 places unit with digital tachometer includes beakers, cov-ers, stainless steel stirrers, test rods with plastic holders and 9C thermom-eters. Polishing machine is not included.

ACCESSORIES



9416306 - RUST TESTER


SCOPEThis test method covers the determination of chlorine in lubricating oils andgreases containing additives, and in additive concentrates.

ASTM D 808 Chlorine in New and Used PetroleumProducts (Bomb Method)

941636 Polishing apparatus w ith electric motor

941631 400 ml beaker941632 Transparent plastic cover941633 Stainless steel stirrer

9416341 Test specimen9416342 Plastic holder



SCOPEThis test method covers the determination of oil in petroleum waxes havinga congealing point of 30°C or higher as determined in accordance with testmethod D 938, and containing not more than 15% of oil.


REF. 941795Complete apparatus with cooling bath, 3 filter stick, air pressure regulatorand evaporation assembly, with 4 weighing bottles and thermometer.


ASTM D 721 Oil Content of Petroleum Waxes

941795 - OIL CONTENT TESTER


23240 Weighing bottle (15 ml)941797 Filter stick B24

9417971 Cooling sample tube



9907203 IP thermometer 72C

9417902 Pt 100 probe (60x5 mm)

9417904 Pt 100 probe (160x5 mm)


32




SCOPEThis test method covers the distillation of industrial aromatic hydrocarbons

ASTM D 850 Distillation of Industrial AromaticHydrocarbons


SCOPEThis test method covers the determination of the tendency of aviation recip-rocating, turbine, and jet engine fuels to form gum and deposits under ac-celerated aging conditions.

OTHER STANDARDSIP 138 - NFM 07013 - DIN 51799

ASTM D 873 Oxidation Stability of Aviation Fuels(Potential Residue Method)


SCOPEThis test method covers the determination of the sulfated ash from unusedlubricating oils containing additives and from additives concentrates used incompounding.


ASTM D 874 Sulfated Ash from Lubricating Oils andAdditives

SCOPEThis test method covers a referee and a routine procedure for determiningthe dielectric breakdown voltage of insulating liquids.

OTHER STANDARDSIP 295 - NFC 27221

REF. 9923797Complete Tester model OTS60AF/2 for Dielectric Breakdown Voltage, de-livered with oil test vessel fitted with spherical electrodes and oil test setpreparation kit comprising stirrers, mushroom and cylindrical electrodes,electrode spacing gauge and protective cover.

REF. 9927196Portable tester model OTS60PB for routine analysis, delivered with 4 oilvessels, 1 pair of spherical, mushroom and cylindrical electrodes, spacinggauge and protective carrying case.


ASTM D 877 Dielectric Breakdown Voltage of InsulatingFluids

9923798 Test container + electrodes for D8779923799 Test container + electrodes for NFC 27221 picture not mandatory

9927196 - PORTABLE MEGGER

12 V rechargeable

19 Kgw 259 mmd 247 mmh 373 mm

33




SCOPEThis test method covers the determination of pentane et toluene insolublesin used lubricating oils.


ASTM D 893 Insolubles in Used Lubricating Oils

SCOPEThis test method covers the determination of the foaming characteristics oflubricating oils at 24°C and 93.5°C.


REF. 941643Twin test units for both 24 and 93.5 °C. Complete with certified diffuserstone.

REF. 941640single test unit for both 24 and 93.5 °C. Complete with certified diffuserstone.

REF. 9416431Automatic time sequencer to monitor soaking, blowing and settling periodsfor 4 samples. It helps the operator to limit his presence nearby the instru-ment using audible and visual alarm.

ACCESSORIES


ASTM D 892 Foaming Characteristics of Lubricating Oils


941643 - FOAMING TEST BATH


9416431 - AUTOMATIC SEQUENCER


99644 - WET TEST GAS METER24795 Dif fuser stone calibrated (w ith certif icate)

99644 Wet Test Gas Meter (type 00)

9416412 Graduated cylinder (1000 ml) w ith ballast9416433 A ir compressor

9411302 Borosilicate glass jar(300 x 450 mm)

941641 Graduated cylinder (1000 ml)




5 Kgw 260 mmd 260 mmh 460 mm

9417904 Pt 100 probe (160x5 mm)


996422 Stainless steel dif fuser stone

9923203 Cryostat TLC 30 - 5 liters (-30/+60°C ±.1)

34



ASTM D 942 Oxidation Stability of Lubricating Greases(Oxygen Vessel Method)


SCOPEThis practice covers the laboratory determination, using a glass hydrom-eter, of the density, relative density, or API gravity of crude petroleum, pe-troleum products, or mixtures of petroleum and non petroleum productsnormally handled as liquids, and having a Reid vapor pressure of 26 lb orless.


ASTM D 941 Density and Relative Density of Liquids byLipkin Bicapillary Pycnometer

ASTM D 937 Cone Penetration of Petrolatum


SCOPEThis test method covers measuring with a penetrometer the penetration ofpetrolatum as an empirical measure of consistency.


SCOPEThis test method determines resistance of lubricating greases to oxidationwhen stored statically in an oxygen atmosphere in a sealed system at anelevated temperature under conditions of test.

OTHER STANDARDSIP 142

REF. 941769Constant temperature oil bath, double walled,for two Norma-Hoffman Testvessels

REF. 941770Constant temperature oil bath, double walled,for 4 Norma-Hoffman Testvessels




941770 - OIL BATH (4 places)

99766 Pressure gauge (0-160 psi)99767 Recording pressure gauge (2-pen) w ith tubings941370 Flexible polyethylene tubing w ith quick coupling941761 Complete oxidation vessel941762 Holder for 5 dishes941763 Glass dish941764 Spare burst disc941765 Accessory for c losing vessel9417611 Complete oxidation vessel w ith burst disc9911509 ASTM thermometer 22C

941762 Holder for 5 dishes941763 Glass dish


9417641 Lead gasket for oxidation vessel


9417905 Pt 100 probe (250x5 mm)9417709 Heating element (1000 W)

99365 Charts for recording gauge (pack of 100)

9413621 Red Pen for recorder (pack of 5)9413622 Green Pen for recorder (pack of 5)

35




SCOPEThis test method was developed for, and is used to evaluate the oxidationstability of inhibited steam-turbine oils in the presence of oxygen, water, andcopper and iron metals at an elevated temperature.


REF. 9416240Steam-Turbine Oils oxidation test apparatus, 8 units, with digital tempera-ture display, opaque magnetic screen, one bath thermometer and one setof flowmeters (3 l/h air) included for ASTM D 943.

REF. 9416250Middle distillate petroleum fuel oxidation test apparatus, 8 units, with digitaltemperature display, opaque magnetic screen, one bath thermometer andone set of flowmeters (3 l/h oxygen) included for ASTM D 2274.

REF. 9416260 Oxidation Test apparatus, 8 units, with digital temperature display, opaquemagnetic screen, one bath thermometer.This apparatus is delivered whithout flowmeter.




ASTM D 943 Oxidation Characteristics of InhibitedMineral Oils


9416240 - OXIDATION TESTER

9416241 Complete set of 8 glassw are 9416242 Accessories catalyst, syringe, mandrel, …

21011 Catalyst iron-copper coil (ready to use)

516597 Reel of copper w ire catalyst (20 kg)516596 Reel of iron w ire catalyst (1 kg)941628 Winding f ixture for w ire catalyst996232 Syringe w ith sampling tube

9416231 Thermometer bracket9416233 Sampling tube holder

9416248 Mushroom condenser9416249 Oxygen delivery tube

9416251 Flow meter for 3 l/h air (D943)9416252 Flow meter for 3 l/h oxygen (D2274)9416253 Flow meter for 10 l/h air (D2893)



9417905 Pt 100 probe (250x5 mm)

9416239 Heating element (1000 W)9416247 Test container

9411302 Borosilicate glass jar(300 x 450 mm)

36




SCOPEThis test method specifies a procedure for the laboratory distillation of or-ganic liquids boiling between 30 and 300 °C which are chemically stableduring the distillation process.


ASTM D 1078 Distillation of Volatile Organic Liquids

SCOPEThis test method covers the determination of the loss in mass by evapora-tion of lubricating greases and oils for applications where evaporation lossis a factor.

REF. 941771Evaporation cell with grease sample cup, equipped with flowmeter andneedle control valve.

REF. 941772Evaporation cell with oil sample cup, equipped with flowmeter and needlecontrol valve.


ASTM D 972 Evaporation Loss of Lubricating Greasesand Oils

9417741 Grease sample cup9417742 Oil sample cup9911509 ASTM thermometer 22C9911536 ASTM thermometer 67C

37



SCOPEThis test method covers the determination, at reduced pressures, of therange of boiling points for petroleum products that can be partially or com-pletely vaporized at a maximum liquid temperature of 400°C.


REF. 9411280Half-automated instrument built on a dedicated frame including water cir-culator, vacuum pump, computerized regulation of temperature and pres-sure (1 to 50 mmHg), printing dump of distillation report according to stand-ard and full glassware.



ASTM D 1160 Distillation of Petroleum Products atReduced Pressure


9411280 - VACUUM DISTILLATION UNIT

SCOPEThis test method covers the determination of the water vapor content ofgaseous fuels by measurement of the dew-point temperature and the cal-culation therefrom of the water vapor content.

REF. 941975Complete Tester 3 to 15 psi

REF. 9419751Complete Tester 0 to 350 psi


ASTM D 1142 Water Vapor Content of Gaseous Fuels byMeasurement of Dew-Point Temperature


941975 - WATER VAPOR TESTER

941977 Stainless steel mirror999781 Bourdon manometer 3 to 15 psi999782 Bourdon manometer 0 to 350 psi9911515 ASTM thermometer 33C

99597 Dry ice machine

41604 Set of glassw are

41609 500 ml glass f lask w ith thermow ell41611 200 ml cylinder for vacuum distillation41612 Distillation column and condenser41613 Dual cold trap9411304 Vacuum / Pt100 adapter (top of column)

991303 Set of vacuum pipes

9411303 Light recovery cylinder (12 ml)

41606 Heating block and mantle (1000 W)

9411292 Quartz f lask w ith thermow ell (500 ml)


9417906 Pt 100 probe GDR (170x2 mm)

991301 Distillation column "O" ring991302 Seal gas ket f or Pt100



9411305 Distillation column for quartz f lask

21694 Heating c ontroller

38




SCOPEThis test method covers the measurement of the density of pure hydrocar-bons or petroleum distillates boiling between 90 and 110°C that can behandled in a normal fashion as a liquid at the specified test temperatures of20 and 25°C.

ASTM D 1217 Density and Relative Density of Liquids byBingham Pycnometer

SCOPEThis test method covers the evaluation of the leakage tendencies of wheelbearing greases when tested under prescribed laboratory conditions.


ASTM D 1263 Leakage Tendencies of Automotive WheelBearing Greases


9411520 - FREEZING POINT APPARATUS

SCOPEThis test method covers the determination of the freezing point of engineantifreeze products.


REF. 9411520Freezing point apparatus of engine antifreeze solutions complete withthermometers.


ASTM D 1177 Freezing Point of Antifreeze Products

23239 Dew ar f reezing tube (200 ml)9411522 Dew ar cooling bath9915351 ASTM thermometer 75F9915352 ASTM thermometer 76F


39



SCOPEThis practice covers the procedures for obtaining representative samplesof liquefied petroleum gases such as propane, butane, or mixture thereof,in containers other than those used in laboratory testing apparatus.

OTHER STANDARDSNFM 41101 - ISO 4257 - DIN 51610

REF. 994541Whitey stainless steel sampling vessel (1gallon) complete assembly.

REF. 992251Whitey stainless steel sampling vessel (2250cc) complete assembly.

REF. 991001Whitey stainless steel sampling vessel (1000cc) complete assembly.

REF. 99501Whitey stainless steel sampling vessel (500 cc) complete assembly.

SPARE PARTS

ASTM D 1265 Sampling Liquefied Petroleum (LP) Gases(Manual Method)


SAMPLING OF LPG

SCOPEThis test method covers the evaluation of the resistance of a lubricatinggrease to washout by water from a bearing, when tested at 38 and 79°Cunder the prescribed laboratory conditions.


ASTM D 1264 Determining the Water WashoutCharacteristics of Lubricating Greases

99031 Valve D w ith tube 031 for ref . 99100099034 Valve D w ith tube 034 for ref . 9950099046 Valve D w ith tube 046 for ref . 99225099068 Valve D w ith tube 068 for ref . 99454699400 Quick coupling (QQ-QF4-B-400)99440 1m f lexible tubing (SS-TH4TA4PF4-40) 99464 Inlet valve C for vessel (SS-16DKM4-F4)991613 Quick coupling male (SS-QF4-S-4PM) 991819 Connection M/F TE (SS-4-ST) 992213 Valve (SS-1 VM4)

994546 Stainless steel sampling vessel (1gallon)992250 Stainless steel sampling vessel (2250 cc)991000 Stainless steel sampling vessel (1000 cc)991000 Stainless steel sampling vessel (1000 cc)991000 Stainless steel sampling vessel (1000 cc)99500 Stainless steel sampling vessel (500 cc)

40



See other applications under ASTM D 2784 (Wickbold)

SCOPEThis test method covers the determination of total sulfur in liquid petroleumproducts in concentrations from 0.01 to 0.4 mass %.

OTHER STANDARDSIP 107 - NFM07031- ISO 2192 - DIN 51771


ASTM D 1266 Sulfur in Petroleum Products(Lamp Method)

41



SCOPEThis test method covers the determination of the gage vapor pressures ofliquefied petroleum gas products at temperatures of 37.8°C up to 70°C.


REF. 941432Electronic constant thermostatic bath, 3 vessels capacity, with thermom-eter and digital display. Equipped with adjustable stirring device, low watercut-off, cooling coil for external cryostat and drain cock.

LPG TEST VESSEL (for D1267)

LPG TEST VESSEL (for IP 161)

OPTIONAL ACCESSORY

VAPOR PRESSURE GAUGES (psi and kPa)


ASTM D 1267 Gauge Vapor Pressure of LiquefiedPetroleum Gases (LP-Gas Method)


941921 - LPG TEST VESSEL


SCOPEThis practice covers the laboratory determination, using a glass hydrom-eter, of the density, relative density, or API gravity of crude petroleum, pe-troleum products, or mixtures of petroleum and nonpetroleum productsnormally handled as liquids, and having a Reid vapor pressure of 26 lb orless.


ASTM D 1298 API Gravity of Crude Petroleum and LiquidPetroleum Products by Hydrometer

941921 LPG test vessel

9419221 Test vessel up to 300 psi (20% capacity)9419222 Test vessel above 300 psi (20% capacity) 9419231 Test vessel up to 300 psi (33% capacity) 9419232 Test vessel above 300 psi (33% capacity)

99920 Safety burst disk capsule (add on vessel price)

99424 Metallic manometer 0 to 100 psi/650 kPa99918 Metallic manometer 0 to 500 psi/3400 kPa

99925 Metallic manometer 0 to 250 psi/1600 kPa

999201 Spare burst disc

9419211 A ir chamber w ith valve for 9419219419212 Gas chamber w ith 2 valves for 941921 9419213 Gasket for LPG vessel D1267 (pack of 24)9419237 Seal "O" ring for IP161 test vessel 9911505 ASTM thermometer 18C





9417905 Pt 100 probe (250x5 mm)

42



SCOPEThis test method is for determining hydrocarbon types over the concentra-tion ranges from 5 to 99 volume % aromatics, 0.3 to 55 volume % olefins,and 1 to 95 volume % saturates in petroleum fractions that distill below315°C.


REF. 941505New designed Adsorption apparatus assembly, twin test, with standardcolumn.

REF. 9415050New designed Adsorption apparatus assembly, twin test, with true borecolumn.



ASTM D 1319 Hydrocarbon Types in Liquid PetroleumProducts by fluorescent Indicator Adsorption


941505 - ADSORPTION APPARATUS

ASTM D 1321 Needle Penetration of Petroleum Waxes


SCOPEThis test method covers the empirical estimation of the consistency of waxesderived from petroleum by measurement of the extent of penetration of astandard needle.

OTHER STANDARDSNFT 60123 - ISO 3992 - DIN 51579

995065 Silica gel 100 to 200 mesh (per 500 g)995067 Certif ied silica gel w ith colored indicator (40 gr)995069 Hypodermic syringe 1ml + Needle (10 cm)9415068 Hypodermic c leaning tube (2 m)

995057 Tube UV (40 W)9415052 Standard adsorption column (upper part)9415053 True Bore adsorption column9415054 Spherical connector for air input (S28/12)9415056 Standard w all tubing (low er part)9415057 Outlet for true bore column (S12/2)

11089 Clamp for low er joint11091 Clamp for upper joint


9415058 Electrical vibrator

43



SCOPEThis test method covers measurement of the ability of petroleum oils orsynthetic fluids to separate from water.

OTHER STANDARDSNFT 60125 - ISO 6614

REF. 941550Automated Demulsibility Tester, CE tested and approved, controlled byexclusive software with image processing, with the highest degree ofrepeatability and reproducibility because the layers detections are no longerevaluated by the human eyes but by using a CCD-Camera which takespictures of every sample tube during testing


REF. 941545Semi-automatic demulsibility tester microprocessored controlled , threetest unit, electronic temperature control between 20 and 95°C ± 0,1°C,stirring speed and time control with digital parameters display, moving steelshaft with stirring motor, paddle and inside illumination.


ASTM D 1401 Water Separability of Petroleum Oils andSynthetic Fluids


941550 - AUTO DEMULSIBILITY TESTER


941545 - DEMULSIBILITY TESTER

SCOPEThis test method covers a procedure for determination of the smoke pointof kerosine and aviation turbine fuel.


REF. 941680Smoke point apparatus, complete, delivered with one interchangeable oilcontainer


ASTM D 1322 Smoke Point of Kerosine and AviationTurbine fuel


941680 - SMOKE POINT APPARATUS

9416801 Candle (oil container)996802 Wick (pack of 12)

9415450 Stirring paddle

11470 Glass graduated cylinder (100 ml)


941551 Translucent plate for bath bottom

4 Kgw 200 mmd 200 mmh 400 mm



9417901 Pt 100 probe (150x6 mm)

11470 Glass graduated cylinder (100 ml)9415450 Stirring paddle

9417904 Pt 100 probe (160x5 mm)



44




SCOPEThis test method describes two procedures for the measurement of thedensity of materials which are fluid at the desired test temperature.

ASTM D 1480 Density and Relative Density of ViscousMaterials by Bingham Pycnometer

SCOPEThis test method covers the determination of the extent to which a greaseretards the rotation of a slow-speed ball bearing by measuring starting andrunning torques at low temperatures (below -20°C).


ASTM D 1478 Low-Temperature Torque of BallBearing Grease

ASTM D 1403 Cone Penetration of Lubricating GreaseUsing 1/4 and 1/2 Scale Cone Equipment


SCOPEThis test method covers two procedures for measuring the consistency ofsmall samples of lubricating greases by penetration of a ¼ or ½ scale cone.


45



SCOPEThis test method covers three procedures for the determination of totalsulfur in petroleum products including lubricating oils containing additives,and in additive concentrates.

OTHER STANDARDSNFM 07025

REF. 99450Equipment including electric tube furnace microprocessored digital settingand reading, gas washing bottles, calibrated flowmeter, porcelain combus-tion tube, combustion boats, boat pusher, bent tube, absorber, buretteswith support and clamps.


ASTM D 1552 Sulfur in Petroleum Products(High-Temperature Method)


99450 - HIGH TEMPERATURE SULFUR TESTER

994012 Boat pusher994024 Combustion boat (alundum)994062 Combustion tube 994501 Heating element for furnace9414003 Oxygen drying train (3 f lask)

941472 Burette (25 ml in 0.1ml)

9414701 Right angle connector w ith standard joint9414564 Absorber


SCOPEThis test method covers the visual determination of the color of a widevariety of petroleum products such as lubricating oils, heating oils, dieselfuel oils, and petroleum waxes.


REF. 9924415Manual colorimeter model AF650 with a 16 filters colorimetric scale from0.5 to 8.0 units. It is a 3-field instrument for visually determining the ASTMcolour of samples by direct comparison with coloured glass standards. Theinstrument is delivered with 3 glass sample jar and a calibration certificatefor the filters.


AUTOMATIC APPARATUSREF. 9926936 ON REQUESTThe Lovibond PFX 190 is an easy to use, automatic instrument requiringno special skills to operate. It is supplied complete with Windowssoftware, accessories and spares, optical glass cells for the colour scalesincluded. Additional scales can be added to standard instruments onrequest.

REF. 9929006 ON REQUESTThe Lovibond PFX 880/P is an easy to use, automatic instrument, whicheliminates time-consuming procedures of visual methods. It is aspectrophotometer for objective colour analysis of petroleum fuels, oils,waxes and petrochemicals according to the Saybolt and ASTM Colourscales

ASTM D 1500 ASTM Color of Petroleum Products(ASTM Color Scale)


9924415 - COLORIMETER AF650

115/230 V0.3 A50 Hz5.5 Kgw 255 mmd 250 mmh 170 mm

19353 Glass sample tube22279 Halogen lamp 12V / 20W

46



SCOPEThis test method covers the determination of the relative density or densityof light hydrocarbons including liquefied petroleum gases (LPG).

OTHER STANDARDSIP 235 - NFM 41008 - ISO 3993

REF. 941911Complete apparatus, mounted on a heavy base and suitable for immersionin a constant temperature water bath.

REF. 9419110Complete apparatus with burst disk, mounted on a heavy base and suitablefor immersion in a constant temperature water bath.

ACCESSORY (required)

ACCESSORY (optional)


ASTM D 1657 Density or Relative Density of Light Hydro-carbons by Pressure Thermohydrometer


941911 - TEST VESSEL

941432 Constant temperature w ater bath (3 test)

999121 Thermo-hydrometer (0.500 to 0.650 in °F)999122 Hydrometer (0.500 to 0.580)999123 Hydrometer (0.570 to 0.650)999125 Thermo-hydrometer (0.500 to 0.650 in °C) 999132 Lucite transparent cylinder

9419133 Neoprene gasket9909124 Thermometer ISO 6539911499 ASTM thermometer 12C





9417905 Pt 100 probe (250x5 mm)

9923203 Cry os tat TLC 30 - 5 liters (-30/+60°C ±.1)

47




SCOPEThis test method covers the determination of water in the concentrationfrom 50 to 1000 mg/kg in liquid petroleum products.

OTHER STANDARDSNFT 60154 - ISO 6296 - DIN 51777


ASTM D 1744 Determination of Water in Liquid PetroleumProducts by Karl Fischer Reagent

SCOPEThis test method is used for evaluating the rust-preventive properties ofmetal preservatives under conditions of high humidity.


ASTM D 1748 Rust Protection by Metal Preservatives in theHumidity Cabinet

SCOPEThis test method covers the determination of the tendency of a lubricatinggrease to separate oil during storage in both normally filled and partiallyfilled containers.

REF. 9417786-test unit apparatus, complete, including air-pressure reducing valve andregulator, constant temperature oven, bleeding cups with cover and sievestrainers, with thermometer.


ASTM D 1742 Oil Separation from Lubricating Greaseduring Storage

997781 200 mesh stainless steel s ieve (type A )9417782 Beaker (20 ml)

9911492 ASTM thermometer 5C9418779 Heating element (500 W)

941778 - OIL SEPARATION FROM GREASE



48



ASTM D 1831 Roll Stability of Lubricating Grease

SCOPEThis test method covers determination of the changes in the consistency,as measured by cone penetration, of lubricating greases when worked inthe roll stability test apparatus.

REF. 941744Specially designed twin-unit for long runs at elevated temperature up to150 °C. Delivered with 2 rolls/cylinders, tools and gloves.

ACCESSORIES



SCOPEThis test method covers the laboratory test for determination of water andsediment in fuel oils by using the centrifuge method in the range from 0 to30 % volume.


ASTM D 1796 Water and Sediment in Fuel Oils by theCentrifuge Method (Laboratory Procedure)

ASTM D 1754 Effects of Heat and Air on AsphalticMaterials (Thin-Film oven Test)

SCOPEThis test method covers the determination of the effects of heat and air ona film of semisolid asphaltic materials.

REF. 941876Strictly conform to ASTM requirements, this is a double wall illuminatedoven with glass window, 4 place revolving shelf, 4 aluminium containersand thermometer.

ACCESSORIES



941744 - ROLL STABILITY TESTER

9417441 Lubricating grease pump for bearing (500g)9417442 Roller gasket

997443 Stopper 50/56 x 51 mm997444 Gloves (pair)997445 Bearing

230 V10 A50 Hz75 Kgw 600 mmd 570 mmh 520 mmon request115V 60Hz9417834 Pt 100 probe (60x3.15 mm)

941876 - THIN FILM OVEN


998762 Bulb 230V /15W9911500 ASTM thermometer 13C

998761 A luminium sample container 140x10 mm


49



SCOPEThis test method covers the removal of pentanes and lighter hydrocarbonsfrom gasolines, naphthas and similar petroleum distillates to prepare sam-ples suitable for the determination of hydrocarbon types in accordance withTest Method D 1319 or Test Method D 2789.

REF. 19398Depentanization apparatus complete

ASTM D 2001 Depentanization of Gasoline and Naphthas

SCOPEThis test method detects the presence of components in liquefied petro-leum gases which may be corrosive to copper.


REF. 941432Electronic constant thermostatic bath , 3 vessels capacity, with thermom-eter and digital display. Equipped with adjustable stirring device, low watercut-off, cooling coil for external cryostat and drain cock.



ASTM D 1838 Copper Strip Corrosion by LiquefiedPetroleum (LP) Gases


99486 Multistrip polishing vise99493 Copper strip corrosion test standard


9911499 ASTM thermometer 12C9922505 Silicon carbide pow der 150 mesh (1 kg)

941905 Corrosion test vessel (150 x 38 mm)941906 Suspension for test cylinder

9414850 Copper strip semi-f inished w ith hole (pack of 24)


9911499 ASTM thermometer 12C9922505 Silicon carbide pow der 150 mesh (1 kg)

9414850 Copper strip semi-f inished w ith hole (pack of 24)

SCOPEThis test method is a measure of the relative purity of the various types ofliquefied petroleum (LP) gases and helps to ensure suitable volatility per-formance.

OTHER STANDARDSNFM41012 - ISO 6620

REF. 941940Complete apparatus, with test tube, 2 Dewar flasks and armored ther-mometer


ASTM D 1837 Volatility of Liquefied Petroleum (LP) Gases


941940 - TESTER FOR LPG

941297 8" cone-shaped tube (100 ml)941942 Unsilvered Dew ar f lask9915164 ASTM thermometer 99C




9417905 Pt 100 probe (250x5 mm)

9915165 Sleeve for 99C thermometer

50



SCOPEThis test method describes a procedure for determining the filter blockingtendency (FBT) of distillate fuel oils where the end use demands an excep-tional degree of cleanliness.


REF. 41800Automatic portable model NBF 210 with printer to determine FBT. Thepressure/flow curve is printed at the end of the test as well as the calcula-tion type and results.

REF. 41801Automatic bench top model NBF 210 with printer to determine FBT. Thepressure/flow curve is printed at the end of the test as well as the calcula-tion type and results.


ASTM D 2068 Filter Blocking Tendency of Distillate FuelOils


41800 - PORTABLE MODEL NBF 210


41801 - BENCH TOP MODEL NBF 210

SCOPEThis practice covers the isolation of a representative saturates fraction fromdepentanized hydrocarbon mixtures that distil below 221°C.

REF. 19400High efficiency column

ACCESSORIES

ASTM D 2003 Isolation of Representative Saturates Frac-tion from High-Olefinic Petroleum Naphthas

SCOPEThis practice covers the isolation of a representative saturates fraction fromdepentanized hydrocarbon mixtures that distil below 221°C and that con-tain less than 1 volume percent of olefinic hydrocarbons.

REF. 19399Complete adsorption column for low olefinic concentration

ASTM D 2002 Isolation of Representative Saturates Frac-tion from Low-Olefinic Petroleum Naphthas

13603 Spherical ground joint w ith nipple




51



ASTM D 2112 Oxidation Stability of Inhibited MineralInsulating Oil by Rotating Bomb


SCOPEThis test method utilizes an oxygen-pressured bomb to evaluate the oxida-tion stability of inhibited mineral oils.

REF. 9416298 ON REQUESTOil thermostatic bath for 2 rotating test vessels

SCOPEThis test method covers the determination of the extraneous materials weath-ering above 38°C that are present in liquefied petroleum gases.


REF. 941957Apparatus for determining the extraneous residues above 100°FComplete with thermometer.


ASTM D 2158 Residues in Liquefied Petroleum (LP) Gases


941957 - TESTER FOR LPG

941297 8" cone-shaped tube (100 ml)941942 Unsilvered Dew ar f lask

9911529 ASTM thermometer 57C9911492 ASTM thermometer 5C



9416298 - OXIDATION STABILITY

52



SCOPEThis test method covers the determination of the dropping point of lubricat-ing grease.


ASTM D 2265 Dropping Point of Lubricating Grease OverWide Temperature Range


See other application under ASTM D 2669 - D 2983 - D 4287

SCOPEThis test method covers the determination of rheological properties of non-newtonian materials by rotational (Brookfield) viscometer.


ASTM D 2196 Rheological Properties of Non-NewtonianMaterials by Rotational Viscometer

ASTM D 2272 Oxydation Stability of Steam Turbine Oils byRotating Bomb


SCOPEThis test method utilizes an oxygen-pressured bomb to evaluate the oxida-tion stability of new and in service turbine oils having the same composition(base stock and additives) in the presence of water and a copper catalystcoilm at 150°C.



SCOPEThis test method covers the determination of trace amounts (less than 0.05volume %) of sediment in lubricating oils.

ASTM D 2273 Trace Sediment in Lubricating Oils


SCOPEThis test method covers the measurement of inherent stability of middledistillate petroleum fuel under accelerated oxidizing conditions.


ASTM D 2274 Oxidation Stability of Distillate Fuel Oil(Accelerated Method)

53



51000 Monitoring computer for analyser

51001 Analyser (2 pl.) for D2500, D97, D2386

51004 Analyser (2 pl.) for D97, D2386

SCOPEThis test method covers the determination of the temperature below whichsolid hydrocarbon crystals may form in aviation turbine fuels and aviationgasoline.


REF.941556Complete freezing point apparatus, comprising : jacketed sample tube,brass packing gland for stirrer, brass wire stirrer, vacuum flask unsilveredwith support and thermometer



REF. 51042The NPC 452 allows automatic determination of the freezing point ofaviation fuels and antifreeze products. This double-unit analyser isequiped with an integrated cooling unit (+30 to - 70 °C). Monitoring isachieved by Windows (c) friendly software.


ALTERNATIVES

ACCESSOIRES NECESSAIRES


ASTM D 2386 Freezing Point of Aviation Fuels


941556 - FREEZING POINT

9415561 Jacketed sample tube (double w alls)9415562 Gland, brass packing for stirrer9415563 Stirrer9415564 Vacuum f lask unsilvered9911566 ASTM thermometer 114C9913463 Cork for sample tube

5 Kgw 200 mmd 200 mmh 450 mm



51042 - FREEZING POINT NPC 452

50013 Sample tube w ith double w alls51144 Freez ing s olid s tate relay51146 Stirrer

54



SCOPEThis test method indicates the tendency of a mineral insulating oil to deterio-rate on oxidation under specified conditions.

REF. 94165012-test aluminium block bath with electronic controller with digital tempera-ture display and setting, using PT 100 sensor. Temperature can be adjustedbetween 50 and 210°C +/- 0,5°C to comply with standards requests.This instrument is delivered without flowmeter, thermometer nor glass-ware (12 of each must be ordered separately).



ASTM D 2440 Oxidation Stability of Mineral Insulating Oil

See other application under IP 48 - IP 280 - IP 306 - IP 307 - IP 335


941650 - OXIDATION STABILITY TESTER

9416501 Flow meter for 15 l/h air (IP48)9416502 Flow meter for 1 l/h oxygen (IP 280-306-307-335)9416503 Glassw are for ALL methods (set of 2)

9416503 Glassw are for ALL methods (set of 2)

SCOPEThis test method covers the detection of hydrogen sulfide in liquified petro-leum (LP) gases.

OTHER STANDARDSNFM 41011

REF. 941958Apparatus for hydrogen sulfide in liquefied petroleum gases


ASTM D 2420 Hydrogen Sulfide in Liquefied Petroleum(LP) Gases (Lead Acetate Method)


941958 - HYDROGEN SULFIDE TESTER

9419581 Set of glassw are


230 V10•6 A50 Hz55 Kgw 650 mmd 620 mmh 860 mmon request115V 60Hz



9925960 IP thermometer 15C w ith collar

9925960 IP thermometer 15C w ith collar



9417834 Pt 100 probe (60x3.15 mm)9416508 Heating element (1500 W)


55



SCOPEThis test method covers the determination of evaporation loss of lubricatinggreases at temperatures between 93 and 316°C.


ASTM D 2595 Evaporation Loss of Lubricating Greases OverWide-Temperature Range


SCOPEThis test method covers only petroleum products which are transparent inlayers 40mm in thickness, and with a cloud point below 49°C.


ASTM D 2500 Cloud Point of Petroleum Products

56



SCOPEThis test method covers the determination of the electrical conductivity ofaviation and distillate fuels with and without a static dissipator additive.


REF. 99981Portable Conductivity meter


ASTM D 2624 Electrical Conductivity of Aviation andDistillate Fuels

SCOPEThis test method covers the determination of the hydrolytic stability of pe-troleum or synthetic-base hydraulic fluids.

REF. 941995oven complete with filtration assembly, 12 bottles, crown cork, copper stripsand protections.


ASTM D 2619 Hydrolytic Stability of Hydraulic Fluids(Beverage Bottle Method)


SCOPEThis test method covers the laboratory determination of apparent viscosityof engine oils at 0°F and at high shear rates.

OTHER STANDARDSDIN 51377


ASTM D 2602 Apparent Viscosity of Engine Oils Using theCold-Cranking Simulator

999951 Membrane f ilters (pack of 100)999952 Caps w ith inert seals (pack of 100)999953 Bottle (200 ml)9419954 Copper strips (pack of 20)9419955 Heating elements for oven (per set)

999811 Carbon/zinc spare battery (9 V )


99981 - CONDUCTIVITY METER

Battery V AHz

5 Kgw 400 mmd 210 mmh 150 mm


941995 - HYDROLYTIC STABILITY



57




SCOPEThis test method covers the determination of the knock characteristics ofmotor gasolines, intended for use in spark-ignition engines, in terms of ASTM-IP research octane numbers.



ASTM D 2699 Knock Characteristics of Motor by theResearch Method


SCOPEThis test method covers the determination of the knock characteristics ofmotor and aviation gasolines, intended for use in spark-ignition engines.


ASTM D 2700 Knock Characteristics of Motor and AviationFuels by the Motor Method

ASTM D 2669 Apparent Viscosity of Petroleum WaxesCompounded with Additives (Hot Melts)

See instrument under under ASTM D 2196

SCOPEThis test method covers the determination of the apparent viscosity of pe-troleum waxes compounded with additives (hot melts).



SCOPEThis test method covers the measurement of the ability of oil and water toseparate from each other.

ASTM D 2711 Demulsibility Characteristics of LubricatingOils

58




SCOPEThis test method covers determination of the oxidation characteristics ofextreme-pressure fluid lubricants, gear oils, or mineral oils.

ASTM D 2893 Oxidation Characteristics of ExtremePressure Lubricating Oils

ASTM D 2872 Effect of Heat and Air on a Moving Film ofAsphalt (RTFOT)

SCOPEThis test method is intended to measure the effect of heat and air on amoving film of semisolid asphaltic materials.

REF. 941877Double wall illuminated oven with glass window, 8 places revolving verticalshelf, 8 glass containers, thermometer and instruction manual.


SCOPEThis test method covers the determination of total sulfur in liquefied petro-leum gases containing more than 1µg/g.


REF. 9924516The tester includes metallic structure, stainless steel (not quartz) oxi-hydro-gen burner, quartz combustion chamber cooled by water, gas supply sys-tem with flowmeters and adjustment valves, gas safeties, dry vacuum pumpand protective screen, delivered without glassware



ASTM D 2784 Sulfur in Liquefied Petroleum Gases(Oxy-Hydrogen Burner Method)

9418771 Standardized glass container998762 Bulb 230V /15W

9911500 ASTM thermometer 13C9418779 Heating element (500 W)


24516 - WICKBOLD TESTER


21343 Set of glassw are for Wickbold Tester9910689 Liquef ied gas cylinder w ith valves

20928 Quartz combustion chamber20983 Absorber w ith f ritted plate20984 Trap


941877 - OVEN “RTFOT”



9910688 Stainless steel burner oxygen / hydrogen


9910689 - LPG CYLINDER

59



SCOPEThis test method covers the determination of salts in crude oil.


REF. 941287Complete salt-in-crude analyzer, NEW DESIGNED MODEL, with testcell, electrode assembly and test leads, digital autoranging meter for read-ing the voltage and current.


ASTM D 3230 Salts in Crude Oil (Electrometric Method)


941287 - CRUDE OIL ANALYZER

SCOPEThis test method describes the use of the Brookfield viscometer for thedetermination of the low-shear-rate viscosity of automotive fluid lubricantsin the temperature range from -5 to -40°C.



BROOKFIELD VISCOMETERS (See ASTM D 2196)

ASTM D 2983 Low-Temperature Viscosity of AutomotiveFluid Lubricants (Brookfield Viscometer)


SCOPEThis test method covers the determination of solvent extractables in petro-leum waxes.

ASTM D 3235 Solvent Extractables in Petroleum Waxes

9412872 Test cell9412871 Electrode w ith cover


60



SCOPEThis test method covers the ability of a petroleum-type steam turbine oil toseparate entrained air.


REF. 941688Complete equipment for determination of the ability of an oil to separateentrained air in hydraulic, turbine and other lubricating oils.

ACCESSORIES


ASTM D 3427 Air Release Properties of Petroleum Oils


941688 - IMPINGER TEST RIG


SCOPEThis test method covers the determination of flash points of liquids by theSetaflash closed cup tester .

ASTM D 3278 Flash Points of Liquids by Setaflash-Closed-Cup Apparatus




12628 5 ml plunger12629 10 ml plunger996885 Balance w ith acquis ition sof tw are (62 g / 0,1 mg)

9416883 Test head9416882 Sample tube


9417834 Pt 100 probe (60x3.15 mm)

9921375 Electronic stopw atch


61




SCOPEThis test method provides a rapid portable means for field and laboratoryuse to rate the ability of aviation turbine fuels to release entrained or emul-sified water when passed through fiberglass coalescing material.

ASTM D 3948 Water Separation Characteristics of AviationTurbine Fuels by Portable Separometer


SCOPEThis test method describes the laboratory determination of water and sedi-ment in crude oils by means of the centrifuge procedure.

ASTM D 4007 Water and Sediment in Crude Oil by theCentrifuge Method (Laboratory Procedure)


SCOPEThis test method covers the prediction of the borderline pumping tempera-ture (BPT) of engine oils through the use of a 16 h cooling cycle over thetemperature range from 0 to -40°C.

OTHER STANDARDSSAE J300


ASTM D 3829 Predicting the Borderline PumpingTemperature of Engine Oil


SCOPEThis test method covers procedure for the determination of the flash pointby a small scale closed tester.


ASTM D 3828 Flash Points by Small Scale Closed Tester


62



SCOPEThis practice covers procedures for manually obtaining representative sam-ples of petroleum products of a liquid, semi-liquid, or solid state whose vaporpressure at ambient conditions is below 101 kPa.


REF.9922213 Brass weighted bottle, neck 19mm.

REF.9922214Brass weighted bottle, neck 38mm

REF.9919032Sampling thief, bomb type (1 liter) diameter 80 mm.


ASTM D 4057 Manual Sampling of Petroleum andPetroleum Products


9922213 - SAMPLING BOTTLE

ASTM D 4287 High-Shear Viscosity Using the ICICone/Plate Viscometer


SCOPEThis test method covers the determination of high-shear viscosity using theICI cone/plate viscometer.


SCOPEThis test method covers the determination of water in the range from 0.02to 2% in crude oils.


ASTM D 4377 Water in Crude Oils by Potentiometric KarlFischer Titration

9919035 Chain nickel-plated brass 5 m length9919036 Chain nickel-plated brass 10 m length9919037 Chain nickel-plated brass 15 m length9919039 Nylon cable 50 m length

63




SCOPEThis test method covers the determination of the amount of carbon residueformed after evaporation and pyrolisis of petroleum materials under certainconditions and is intended to provide some indication of the relative cokeforming tendency of such materials.

OTHER STANDARDSIP 398 - ISO 10370 - DIN 51551

REF. 41023The NMC 440 model, fully automatic tester, provides 3 preset methodsplus 17 additional ones with 4 heating segments. It performs Conradsonand ash test up to 750°C under automatic controlled atmosphere. Testreport including weights, results and temperature curve printed on any stand-ard printer or send to computer throught RS232C output.




ASTM D 4530 Determination of Carbon Residue( M C R A T )


41023 - MICRO CONRADSON NMC 440

41001 2 ml borosilicate glass sample vial (MCR)41002 16 ml borosilicate glass sample v ial (MCR)

41004 16 ml quartz sample v ial for ash content 41003 2 ml quartz sample v ial for ash content

41025 Gas connection kit-2 gas outputs41026 4 ml borosilicate glass sample tube (MCR)41027 Holder for 25-50-100 gr porcelain crucibles

10510 Porcelain crucible,130 ml tall form (pack of 6 )

10508 Porcelain crucible, 54 ml tall form (pack of 6 )10515 Porcelain crucible, 80 ml low form (pack of 6 )



64




SCOPEThis test method covers the measurement of the yield stress and viscosityof engine oils after cooling at controlled rate over a period exceeding 45 hto a final test temperature between -10 and -40°C.

ASTM D 4684 Determination of Yield Stress and ApparentViscosity of Engine Oils at Low Temperature


SCOPEThis test method provides a rapid, portable means for field and laboratoryuse to visually inspect for particulate matter and numerically rate free waterin aviation turbine and distillate fuels.

ASTM D 4860 Free Water and Particulate Contamination inMid-Distillate Fuels (Clear and Bright Rating)

SCOPEThis test method determines the temperature at which an oil can becomeunsuitable for lubrication of a mechanical device such as an engine, be-cause of insufficient flow of the bulk oil in the sump to the oil screen.


ASTM D 5133 Temperature Dependence of Lubricating OilsUsing a Temperature-Scanning Technique

SCOPEThis test method covers the use of automated vapor pressure instrumentsto determine the total vapor pressure exerted in vacuum by air-containing,volatile, liquid petroleum products.


ASTM D 5191 Vapor Pressure of Petroleum Products(Mini Method)

65



SCOPEThis test method covers a procedure for determining the evaporation lossof lubricating oils (engine oils) using the Noack evaporative tester.

OTHER STANDARDSNFT 60161 - DIN 51581- CEC L40 A93

REF. 941783Evaporative capacity tester for lubricating oils, complete with P I D tem-perature regulator, set of glassware, manometer and liquid, one cruciblewith tools, one pair protecting gloves, thermometer with certificate.



ASTM D 5800 Evaporation Loss of Lubricating Oils by theNoack Method


941783 - NOACK TESTER


SCOPEThis test method covers the laboratory determination of apparent viscosityof engine oils at temperatures between -5 and -30°C at shear stresses ofapproximately 50000 to 100000 Pa and shear rates of approximately 100000to 10000 s-1 and viscosities of approximately 500 to 10000 mPa*s.

ASTM D 5293 Apparent Viscosity of Engine Oils Using theCold-Cranking Simulator

ASTM D 6082 High Temperature Foaming Characteristicsof Lubricating Oils

SCOPEThis test method describes the procedure for determining the foaming char-acteristics of lubricating oils (specifically transmission fluid andmotor oil) at 150 °C.

REF. 9416432Sequence Four test bath for 2 test at 150°C. Ready to use and deliveredwith two test cylinders, calibrated flowmeters and stainless steel diffusers.




9416432 - FOAMING TESTER (150 °C)

9416434 Oil polyalphaolef in for bath (can of 25 l)

941641 Graduated cylinder (1000 ml)

997837 Standardization oil RL 172/4 (1 liter)997838 Vacuum pump model ME2C9417831 Automated vacuum controller9417832 Graphic data recorder and printer9921375 Electronic stopw atch

997833 Wood metal (100g)9417830 Heating element (set of 2)9417834 Pt 100 probe (60x3.15 mm)9417835 Stainless steel crucible9417836 Set of glassw are

9907839 Thermometer w ith certif icate (+40/+260°C)

997831 silicon tubing inside diam. 4 mm (1 meter)



9417905 Pt 100 probe (250x5 mm)

9417907 Pt 100 probe GDR (120x2 mm)

9416431 Automatic time sequencer

996422 Stainless steel dif fuser stone941435 Heating element (2000 W)


66



ASTM D 6371 Cold Filter Plugging Point

51002 Analyser (2 pl.) for D2500, D97, IP30951003 Analyser (2 pl.) for D2386, IP30951005 Analyser (2 pl.) for D97, IP309

51000 Monitor ing c omputer f or analys er

See other application under IP 309 - IP 419

SCOPEThis test method covers the determination of the cold filter plugging point(CFPP) of diesel and domestic heating fuels using either manual or auto-mated test equipment.

REF. 20878This model, single unit includes double wall bath with insulation, jacket, testtube, insulating ring and spaces, jacket stand, 3-hole stopper, pipet, filtra-tion set and thermometers.



REF. 41700Standard model NSF 420 delivered complete for the CFPP and SFPP testmethods with printer. Cryostat is not included .

REF. 41702standard model NSF 420 without SFPP Kit.




REF. 51052The NTL 452 allows automatic determination of cold filter pluggingpoint . This double-unit analyser is equiped with an integrated cooling unit(+30 to - 70 °C). Monitoring is achieved by Windows (c) friendly software.


ALTERNATIVES (all with cooling)



41700 - CFPP MODEL NSF 420

27502 Vacuum pump20879 Vacuum regulator + manometer + 3w ay cock

17885 CFPP test tube20880 Jacket20881 Pipet for manual apparatus20882 Filtration device9911492 ASTM thermometer 5C9911493 ASTM thermometer 6C

9923205 Cryostat TLC 80 - 11 liters (-80/+20°C ±.05)21130 Insulated silicone tube connection (1 meter)

17885 CFPP test tube21916 CFPP pipet

41701 Pt 100 probe




51052 - COLD FILTER PLUGGING NTL 452


UNTIL STOCK EXHAUSTION

UNTIL STOCK EXHAUSTION

40809 Basket for tube40822 Filter 45 µ on ring51116 Pow er s olid s tate relay

67



SCOPEThe method is primarily intended for the determination of the viscosity ofany petroleum product which flows in a Newtonian manner, i.e. possessesa linear relationship between shearing stress and rate of shear under theconditions of the test.


IP 70 Redwood Viscosity

SCOPEThis test method provides a measure of the viscosity by determining thetime of efflux of 50 ml of a cut-back bitumen, at 40°C, through a 10mmorifice.

OTHER STANDARDSNF T66005 - DIN 1995

REF.941826BRTA viscometer (4 unit) with electronic controller, electric stirring, digitaldisplay, 4 receivers but without cup and valve.


IP 72 Viscosity of Cutback Bitumen


941826 - BRTA VISCOMETER (4 places)

941829 Graduated receiver 941830 Cup w ith orif ice 4 mm941831 Cup w ith orif ice 10 mm941832 Ball valve 4 mm941833 Ball valve 10 mm

9921375 Electronic stopw atch




SCOPEThis test method is used for the determination of the density or relativedensity of petroleum products as normally handled.

REF. 941960Effusiometer Schilling, complete with thermometer but without stand.

OPTIONAL ACCESSORY


IP 59 Specific Gravity of Gases (Effusion Method)


941644 - SCHILLING EFFUSIOMETER

941961 Metallic stand

941963 Outer glass cylinder941965 Orif ice plate9419640 Inner glass cylinder w ith sealed outf it

15 Kgw 240 mmd 240 mmh 370 mm


See instrument under ASTM D2440

SCOPEThis test method indicates the tendency of a lubricating oil to deteriorate onoxidation under specified conditions.

IP 48 Oxidation Characteristics of Lubricating Oil

68



SCOPEThis test method determines the temperature below which a bitumen tendsto break rather than flow when stressed.



IP 80 Breaking Point of Bitumen (Fraas Method)

SCOPEThis test method specifies a procedure for the determination of the heptaneinsoluble asphaltene content of gas oil, diesel fuel, fuel oils, lubricating oil,bitumen and crude petroleum which has been topped to an oil temperatureof 260°C.


REF. 10479Complete manual apparatus including extractor, condenser, evaporationcup, heating mantle and filter paper.



REF. 24472ASPHAN 02 semi-automatic extractor for stand-alone precipitation, filtra-tion, washing, recycling, redissolution and evaporation processes ofasphaltene.


IP 143 Asphaltenes in Crude Petroleum andPetroleum Products (Heptane Insolubles)


24472 - ASPHALTENE EXTRACTOR

14694 Evaporation cup15643 Filter paper - diameter 110 mm (pack of 100)23860 Electric heating mantle (1500 W)

19364 Condenser

23883 500 ml conical f lask CN2423884 Ref lux extractor CN24/34

21918 500 ml conical f lask CN2921919 Ref lux extractor CN29/34

21364 500 ml low er boiler21365 1000 ml upper boiler w ith stopper21368 Condenser of the collector21369 500 ml solvent collecting f lask21372 Filter "Mitex" (box of 50)


69




SCOPEThis test method describes a method for the determination of gauge vaporpressures of liquefied petroleum gas products at temperatures within theapproximate range of 35 to 70°C.

IP 161 Gauge Vapor Pressure of LiquefiedPetroleum Gas Products

SCOPEThis test method covers the determination of the closed cup flash point ofpetroleum products and other liquids having flash point between -30 and70°C.

OTHER STANDARDSNFT 66009 - DIN 51755

REF. 941601Manual apparatus Abel model NAB 110, with electric heater and gas testjet.



REF. 41300Automatic Abel Tester model NAB 440 equipped with very large displayand printer, it is designed to operate from -30 to +110 °C and can be con-nected to a cryostate for test under 40°C. User-friendly software allowsfull configuration and recording of 100 test results.



IP 170 Flash Point by Abel Closed Cup Tester


41300 - AUTOMATIC ABEL NAB 440

41301 Abel cup41303 Abel cover41306 Stirrer f lexible41309 Detection cable41310 Pt 100 probe

9923203 Cryostat TLC 30 - 5 liters (-30/+60°C ±.1)9923204 Cryostat TLC 40 - 11 liters (-45/+20°C ±.05)

941143 Energy regulator

941604 Cup9416041 Lid shutter and stirrer w ith gas test jet


9921227 IP thermometer 74C w ith collar9921228 IP thermometer 75C w ith collar9921229 IP thermometer 2C




941601 - MANUAL ABEL NAB 110

70



SCOPEThis test method covers procedures for evaluating the shear stability ofpolymer-containing oils in terms of the permanent viscosity loss resultingwhen a sample is mechanically stressed under the test conditions.


IP 294 Shear Stability of Polymer-Containing Oils(diesel Injector Rig Method)


SCOPEThis test method indicates the tendency of straight mineral oil to deteriorateon oxidation under specified conditions.

IP 306 Oxidation Stability of Straight Mineral Oil


SCOPEThis test method indicates the tendency of insulating oil to deteriorate onoxidation under specified conditions.

IP 307 Oxidation Stability of Mineral Insulating Oil


SCOPEThis test method specifies a method for the determination of the corrosivetendencies towards silver, of aviation turbine fuels.

IP 227 Silver Strip Corrosion of Aviation Turbine Fuel


SCOPEThis test method specifies a method for the determination of the resistanceto oxidation under specified conditions of unused inhibited mineral turbineoils.

IP 280 Oxidation Stability of Unused InhibitedMineral Turbine Oils

71




SCOPEThis test method covers the determination of the cold filter plugging point(CFPP) of diesel and domestic heating fuels using either manual or auto-mated test equipment.

IP 309 Cold Filter Plugging Point

72



See instrument underASTM D2440

SCOPEThis test method gives a measure of the tendency of new, inhibited, min-eral insulating oils to oxidize by measurement of an induction period.

IP 335 Oxidation Stability of Inhibited MineralInsulating Oils

SCOPEThis test method covers determination of the flash point at set temperaturein closed cup.


REF.41400Complete Closed Cup Flash Point Tester. The model NPV 210 is designedfor paint, supple, japan, laque, solvent, cosmetic, perfume, distillate andvarious petroleum products.




ISO 3679 Closed Cup Flash Point at Set Temperature

41400 - FLASH POINT TESTER NPV 210


9921604 Loading syringe (pack of 100)9926075 Mercury thermometer for calibration purposes

9923203 Cryostat TLC 30 - 5 liters (-30/+60°C ±.1)



SCOPEThis test method covers the automatic determination of the simulated filterplugging point (SFPP) of middle distillate fuels.

IP 419 Simulated Filter Plugging Point

41401 Detector lead41403 heating c artr idge 250W

73



SCOPEThis test method covers determination of traces of sulfur in petroleum distil-lates by the nickel reduction method.

REF.941489Complete equipment with heating mantle, glassware and energy regulator.


UOP 357 Traces of Sulfur in Petroleum Distillatesby the Nickel Reduction Method

941489 - TRACE OF SULFUR TESTER


994891 Heating mantle 100 ml (60 W)994896 Nickel Reaney catalyst (100 g)

230 V10 A50 Hz23 Kgw 300 mmd 300 mmh 700 mm9414893 Reaction f lask

9414894 Funnel9414895 Test tube

9414892 Condenser9414891 Inlet tube

9414896 Outlet tube

74



REFERENCE PRODUCTS WITH CERTIFICATE

PRODUCT REF. ASTM DESCRIPTION LEVEL VOLUME PRICE

GASOLINE 9930101 D 4052 density at 15 °C 756 kg/m³ 250 ml9930102 D 323 reid vapour pressure 56.5 kPa 250 ml9930103 D 525 induction period (benzine) 250 ml9930104 D 86 automatic distillation (unleaded) 43/175 °C 250 ml9930105 D 86 automatic distillation (naphta) 112/165 °C 250 ml9930106 D 1319 aromatics (unleaded) 12 % 250 ml9930107 D 130 copper strip corrosion (naphta) 1 A 250 ml9930109 D 2700 motor octane index (unleaded) 87.6 1000 ml9930110 D 2699 research octane index (unleaded) 98.7 1000 ml

DIESEL 9931101 D 4052 density at 15 °C 840 kg/m³ 250 ml9931102 D 2500 cloud point -5 °C 250 ml9931103 D 97 pour point -30 °C 250 ml9931104 IP 309 cold filter plugging point -18 °C 250 ml9931107 D 613 cetane index (measured) 48.8 1000 ml9931109 D 86 automatic distillation 180/370 °C 250 ml9931110 D 445 kinematic viscosity at 20 °C 3.5 cSt 250 ml9931111 D 445 kinematic viscosity at 40 °C 2.4 cSt 250 ml9931112 D 93 Pensky-Martens flash point 60 °C 250 ml9931113 D 4294 sulfur content 355 mg/kg 50 ml9931114 D 5453 sulfur content 40 mg/kg 50 ml9931116 D 2500 cloud point + 4°C 250 ml

KEROZENE 9932101 D 4052 density at 15 °C 790 kg/m³ 250 ml9932103 D 2386 congeling point -52 °C 250 ml9932104 D 445 kinematic viscosity at -20 °C 4.18 cSt 250 ml

LUBRICANT 9933101 D 4052 density at 15 °C 880 kg/m³ 250 ml9933103 D 611 aniline point 106 250 ml9933104 D 445 kinematic viscosity at 50 °C 57 cSt 250 ml9933106 D 92 Cleveland flash point 263 °C 250 ml9933107 D 93 Pensky-Martens flash point 216 °C 250 ml

RESIDUE 9934101 D 4530 conradson carbon 15 % 50 ml9934102 D 5291 nitrogen value 0.33 % weight 50 ml9934103 DIN 51900 calorific value 42 Mj/kg 50 ml9934104 D 5291 carbon value 85 % weight 50 ml9934105 D 5291 hydrogen value 11 % weight 50 ml

NOTICE N A : not available

CALIBRATION INSTRUMENT WITH CERTIFICATION

REF. 41200Calibration instrument for the WHOLE range of automated NORMALABANALIS apparatus models 430 and 440. This instrument is dedicated for temperatures and pressures measurementsand it is equipped with a 24-keys keyboard, LCD display, RS232C output.It is delivered with official COFRAC calibration certificate.

41200 - CALIBRATION INSTRUMENT


75



ASTM E 1 Thermometers

ASTM ref. range grad depth pricen° °C °C mm

1C 9911489 -20/+150 1 762C 9911490 -5/+300 1 763C 9911491 -5/+400 1 765C 9911492 -38/+50 1 1086C 9911493 -80/+20 1 767C 9911494 -2/+300 1 total8C 9911495 -2/+400 1 total9C 9911496 -7/+110 0.5 5710C 9911497 +90/+370 2 5711C 9911498 -6/+400 2 2512C 9911499 -20/+102 0.2 total13C 9911500 +155/+170 0.5 total14C 9911501 +38/+82 0.1 7915C 9911502 -2/+80 0.2 total16C 9911503 +30/+200 0.5 total17C 9911504 +19/+27 0.1 total18C 9911505 +34/+42 0.1 total19C 9911506 +49/+57 0.1 total20C 9911507 +57/+65 0.1 total21C 9911508 +79/+87 0.1 total22C 9911509 +95/+103 0.1 total23C 9911510 +18/+28 0.2 9024C 9911511 +39/+54 0.2 9025C 9911512 +95/+105 0.2 9026C 9911513 +130/+140 0.1 total27C 9911514 +147/+182 0.5 7633C 9911515 -38/+42 0.2 5034C 9911516 +25/+105 0.2 5035C 9911517 +90/+170 0.2 5136C 9911518 -2/+68 0.2 4537C 9911519 -2/+52 0.2 10038C 9911520 +24/+78 0.2 10039C 9911521 +48/+102 0.2 10040C 9911522 +72/+126 0.2 10041C 9911523 +98/+152 0.2 10042C 9911524 +95/+255 0.5 10044C 9915629 +18.5/+21.5 0.05 total45C 9915630 +23.6/+26.1 0.05 total46C 9915631 +48.6/+51.4 0.05 total47C 9915632 +58.6/+61.5 0.05 total49C 9911525 +20/+70 0.2 6552C 9911526 -10/+5 0.1 total54C 9920218 +20/+100 0.2 total56C 9911528 +19/+35 0.02 total57C 9911529 -20/+50 0.5 5758C 9905803 -34/+49 0.5 total59C 9905903 -18/+82 0.5 total60C 9906003 +77/+260 1 total61C 9911530 +32/+127 0.2 7962C 9911531 -38/+2 0.1 total63C 9911532 -8/+32 0.1 total64C 9911533 +25/+55 0.1 total65C 9911534 +50/+80 0.1 total66C 9911535 +75/+105 0.1 total67C 9911536 +95/+155 0.2 total68C 9911537 +145/+205 0.2 total69C 9911538 +195/+305 0.5 total70C 9911539 +295/+405 0.5 total71C 9920219 -37/+21 0.5 7672C 9902603 -19.4/-16.6 0.05 total73C 9915633 -41.4/-38.6 0.05 total74C 9902703 -55.4/-52.6 0.05 total

See overleaf

ASTM ref. range grad depth pricen° °C °C mm

82C 9911540 -15/+105 1 3083C 9911541 +15/+70 1 4084C 9911542 +25/+80 1 24985C 9911543 +40/+150 1 18186C 9911544 +95/+175 1 3587C 9911545 +150/+205 1 4088C 9911546 +10/+200 1 5789C 9911547 -20/+10 0.1 7690C 9911548 0/+30 0.1 7691C 9911549 +20/+50 0.1 7692C 9911550 +40/+70 0.1 7693C 9911551 +60/+90 0.1 7694C 9911552 +80/+110 0.1 7695C 9911553 +100/+130 0.1 7696C 9911554 +130/+150 0.1 7697C 9909703 -18/+47 0.5 total98C 9909803 +16/+82 0.5 total99C 9915164 -40/+4 0.2 35100C 9911555 +145/+205 0.2 76101C 9911556 +195/+305 0.5 76102C 9911557 +123/+177 0.2 100103C 9911558 +148/+202 0.2 100104C 9911559 +173/+227 0.2 100105C 9911560 +198/+252 0.2 100106C 9911561 +223/+277 0.2 100107C 9911562 +248/+302 0.2 100110C 9915634 +133.6/+136.4 0.05 total111C 9911563 +170/+250 0.2 100112C 9911564 +4/+6 0.02 total113C 9911565 -1/+20 0.5 total114C 9911566 -80/+20 0.5 total116C 9920220 +18.9/+25.1 0.01 total117C 9920221 +23.9/+30.1 0.01 total118C 9915635 +28.6/+31.4 0.05 total119C 9920222 -38.3/-30 0.1 100120C 9910025 +38.5/+41.5 0.05 total121C 9910026 +98.5/+101.5 0.05 total122C 9901223 -45/-35 0.1 total123C 9901233 -35/-25 0.1 total124C 9901243 -25/-15 0.1 total125C 9901253 -15/-5 0.1 total126C 9901263 -27.4/-24.6 0.05 total127C 9901273 -21.4/-18.6 0.05 total128C 9901283 -1.4/+1.4 0.05 total129C 9901293 +91.6/+94.4 0.05 total

Special with collar9C 9900903 -7/+110 0.5 5710C 9901003 +90/+370 2 5723C 9902303 +18/+28 0.2 9024C 9902403 +39/+54 0.2 9025C 9902503 +95/+105 0.2 90

9915165 Sleeve for ASTM 99C thermometer

FOR ALL THERMOMETERS IN °F : PRICE ON REQUEST

76



IP Thermometers

IP ref. range grad depth pricen° °C °C mm

2C 9921229 -80/+20 1 1083C 9921049 -1/+105 0.5 total8C 9921367 0/+45 0.2 659C 9921369 +40/+85 0.2 6518C 9921826 +20/+100.6 0.2 total22C 9925961 +195/+205 0.1 10030C 9921651 +23.6/+26.4 0.05 total37C 9903703 +144/+156 0.2 10038C 9903803 +23/+27 0.1 total39C 9921675 -1/+38 0.1 total42C 9911337 -38/+30 0.5 25044C 9921915 +15/+30 0.2 2271C 9921650 -27.4/-24.6 0.05 total72C 9907203 -37/+21 0.5 7681C 9925959 +98/+152 0.2 10091C 9923184 0/+110 1 4498C 9923185 +100/+300 2 44

special with collar15C 9925960 -5/+110 0.5 5774C 9921227 -35/+70 0.5 6175C 9921228 -30/+80 0.5 89

FOR ALL THERMOMETERS IN °F : PRICE ON REQUEST

Miscellaneous Thermometers

Ref. Description Price

9900010 General purpose 50/100°C in 0,1°C9900040 General purpose 20/40°C in 0,05°C9900060 General purpose 50/60°C in 0,05°C9900080 General purpose 60/80°C in 0,05°C9900100 General purpose 80/100°C in 0,05°C9900759 Thermometer for grease worker9907839 Thermometer with certificate +40/+260°C9909124 Thermometer ISO 6539915287 Thermometer AFNOR -15/+45°C

Ref. Description Price

9915288 Thermometer AFNOR +35/+85°C9915351 Thermometer 75F for ASTM D11779915352 Thermometer 76F for ASTM D11779926075 Mercury thermometer for calibration9927251 Engler with ring +10/+55°C in 0.5°C9927252 Engler with ring +10/+110°C in 1°C


77



STANDARD REF. P . . . . DESCRIPTION UK PAGE

ASTM D113 9418641 P 864 Ductility meter (100 cm) 13

ASTM D113 9418642 P 864A Ductility meter (150 cm) 13

ASTM D1142 941975 P 975 Dew-point tester 3 to 15 psi 37

ASTM D1142 9419751 P 975A Dew-point tester 0 to 350 psi 37

ASTM D1160 9411280 P 1280 Distillation at reduced pressure (1 to 50 mmHg) 37

ASTM D1177 9411520 P 1520 Freezing point 38

ASTM D1265 99501 Stainless steel sampling vessel (500 cc) 39



ASTM D1265 994541 Stainless steel sampling vessel (1gallon) 39

ASTM D1266 941454 P 454 Sulphur determination in petroleum (6-unit) 40

ASTM D1266 941455 P455 Sulphur determination in LPG (6-unit) 40

ASTM D1319 941505 P 505 Adsorption apparatus 2 standard columns 42

ASTM D1319 9415050 P 505C Adsorption apparatus twin true bore columns 42

ASTM D1322 941680 P 680 Smoke point apparatus 43

ASTM D1401 941545 P 545 Tester for demulsibility of oils 43

ASTM D1401 941550 P 550 Automated demulsibility tester 43

ASTM D1500 9924415 Colorimeter with colour disc 45

ASTM D1552 99450 P 450 Tube furnace for sulphur determination 45

ASTM D156 941520 P 520L Saybolt chromometer 15

ASTM D1657 941911 P 911 Tester for specific gravity of LPG 46

ASTM D1657 9419110 Same apparatus with burst disc 46

ASTM D1742 941778 P 778 Oil separation from grease during storage 47

ASTM D1754 941876 P 876 Effect of heat and air on asphaltic material 48

ASTM D1831 941744 P 744-2B Roll stability Tester 48

ASTM D1837 941940 P 940 Tester for Volatility of LPG 49

ASTM D189 941653 P 653 Conradson carbon residue apparatus 15

ASTM D2001 19398 Depentanization apparatus 49

ASTM D2002 19399 Complete absorption column (method B) 50

ASTM D2003 19400 High efficiency column 50

ASTM D2068 41800 Automatic FBT tester (NBF 210) 50

ASTM D2068 41801 Complete bench top model with printer 50

ASTM D2112 9416298 P 629H Oil thermostatic bath for 2 vessels 51

ASTM D2158 941957 P 957 Tester for determination of extraenous materials 51

ASTM D2386 941556 P 556 Complete freezing point apparatus 53

ASTM D2386 51042 Automated freezing point (NPC 452) 53

ASTM D2420 941958 P 958 Hydrogen sulfide in liquefied petroleum gases 54

ASTM D2440 941650 P 650 Oxidation tester for lubricating oils (12 test) 54

ASTM D2619 941995 P 995 Tester for hydrolytic stability of fluids 56

ASTM D2624 99981 P 981 Portable Conductivity meter 56

ASTM D2784 9924516 Wickbold Tester for sulphur content 58

ASTM D287 14854 6-unit ramp in stainless steel 17

ASTM D2872 941877 P 877 Complete RFTOT oven 58

ASTM D322 9916682 Gasoline diluent tester (gas heating) 18

ASTM D322 9916683 Gasoline diluent tester (electric heating) 18

ASTM D323 941432 P 432 Constant temperature water bath (3 test) 19

ASTM D3230 941287 P 287 Salts in crude oil tester 59

ASTM D3427 941688 P 688 Impinger test rig 60

ASTM D36 40100 Automatic softening point tester (NBA 440) 4

ASTM D36 9418314 P 831-4 Ring and ball apparatus (tapered ring) 4

ASTM D36 9418324 P 832-4 Ring and ball apparatus (shouldered ring) 4

ASTM D36 9418334 P 833-4 Ring and ball apparatus (straight ring) 4

ASTM D381 941302 P 302 Air jet apparatus for determination of gums 20

ASTM D381 941303 P 303 Air/steam jet apparatus for determination of gums 20

ASTM D4057 9922213 Brass weighted bottle (neck 19mm) 62

ASTM D4057 9922214 Brass weighted bottle (neck 38mm) 62

ASTM D4057 9919032 Sampling thief (vessel type) 62

78




ASTM D445 18450 Automatic washer for viscometer 21

ASTM D445 941121 P 121 Kinematic viscosity bath “Routine” (20 liters) 21

ASTM D445 941122 P 122 Kinematic viscosity bath “Routine” (30 liters) 21

ASTM D445 941131 P 131 Kinematic viscosity bath “Precision” (8 visco,) 21

ASTM D4530 41023 Automatic micro carbon residue tester (NMC 420) 63

ASTM D473 941281 P 281 Extration apparatus complete 25

ASTM D482 99130 Muffle furnace for ash determination 26

ASTM D5 941220 BMT 322 Constant temperature water bath (max 100°C) 2

ASTM D5 941731 P 731 Manual penetrometer 2

ASTM D5 941734 P 734 Automatic penetrometer 2

ASTM D5 9417582 P 758-2 Automatic grease working machine (twin unit) 2

ASTM D524 941671 P 671 Ramsbottom carbon residue tester (5 test) 26

ASTM D525 40900 Automatic 2-unit tester with oil bath 27

ASTM D525 40925 Automatic 4-unit tester with metallic bath (NPI 911) 27

ASTM D525 941372 P 372 4-place water bath 27

ASTM D56 40600 Automatic TAG flash point tester (NTA 440) 5

ASTM D5800 941783 P 783 Noack tester with glassware 65

ASTM D6 941875 P 875 Loss on heating 3

ASTM D6082 9416432 Foam test bath at 150°C 65

ASTM D611 41100 Automatic aniline point tester (AP 910) 28

ASTM D611 40500 Automatic aniline point tester (NAE 440) 28

ASTM D613 52000 Cetane blender 2 tanks 29

ASTM D613 52100 Octane blender 3 tanks 29

ASTM D613 52200 Cetane + octane blender (2 cetane + 3 octane) 29

ASTM D613 52300 Cetane + octane blender (2 cetane + 4 octane) 29

ASTM D6371 20878 Manual cold filter plugging point tester 71

ASTM D6371 41700 Multi-parameter SFPP tester (NSF 420) 71

ASTM D6371 41702 NSF 420 without SFPP kit 71

ASTM D6371 51052 Automatic cold filter plugging point (NTL 452) 71

ASTM D664 941708 P 708 Neutralisation number apparatus 30

ASTM D665 9416306 P 630 Rust-preventing characteristics (6 unit) 31

ASTM D70 9924615 Thermostatic bath 5

ASTM D721 941795 P 795 Oil content of petroleum waxes 31

ASTM D86 40000 Automatic D86 distillation unit (NDI 440) 6

ASTM D86 99221 Distillation apparatus (single gas heating) 6

ASTM D86 941227 P 227 Distillation “Front view” (receiver on left) 6

ASTM D86 941228 P 228 Distillation “Front view” (receiver on right) 6

ASTM D877 9923797 analyseur for dielectric breakdown voltage 32

ASTM D877 9927196 Portable tester for routine analysis 32

ASTM D892 941640 P 640 Foaming test apparatus (1 bath) 33

ASTM D892 941643 P 643 Foaming test apparatus (2 bath) 33

ASTM D892 9416431 Automatic time sequencer 33

ASTM D91 9412911 P 291A Centrifuge with rotor (without heating) 8

ASTM D91 9412920 Centrifuge with rotor (with heating 60°C) 8

ASTM D92 40400 Automatic cleveland flash point tester (NCL440) 9

ASTM D92 941611 P 611 Manual cleveland open cup tester (NCL 110) 9

ASTM D92 941610 Semi-automatic Cleveland flash point tester 9

ASTM D93 40300 Automatic P-M flash point tester (NPM 440) 10

ASTM D93 941616 Manual P-M flash point tester (Meth. A) 10

ASTM D93 941617 Manual P-M flash point tester (Meth. B) 10

ASTM D93 941618 Semi-automatic P-M flash point tester (Meth. A) 10

ASTM D93 941619 P 619 Semi-automatic P-M flash point tester (Meth. B) 10

ASTM D942 941769 P 796 2-place bath without accessorie 34

ASTM D942 941770 P 770 4-place bath without accessorie 34

ASTM D943 9416243 Tester for oxidation stability test (3 l/h air) 35

ASTM D943 9416244 Tester for oxidation stability test 3 l/h oxygen) 35

79




ASTM D95 21454 Complete apparatus with electric heater 11

ASTM D97 941584 P 584 Manual cloud and pour point apparatus (5-unit) 12

ASTM D97 941592 P 592 Manual cloud and pour test cabinet (4 test) 12

ASTM D97 51032 Automated cloud and pour point (NTE 452) 12

ASTM D972 941771 P 771 Evaporation cell for grease 36

ASTM D972 941772 P 772 Evaporation cell for oil 36

IP 143 10479 Complete glassware (manual version) 68

IP 143 24472 Semi-automatic Asphan 02 extractor 68

IP 170 41300 Automatic Abel (NAB 440) 69

IP 170 941601 P 602 Manual Abel Flash Point Tester (NAB 110) 69

IP 59 941960 P 960 Effusiometer Schilling 67

IP 72 941826 P 826 BRTA viscometer (4 unit) 67

ISO 3679 41400 Closed cup flash point tester (NPV 210) 72

UOP 357 941489 P 489 Complete equipement with heating mantle 73

80



INDEX OF TEST METHODSASTM page ASTM page IP page IP page NF page DIN page

D5 2 D1321 42 IP 2 28 IP 158 31 NFC 27221 32 DIN 51377 56D6 3 D1322 43 IP 4 26 IP 160 34-41 NFM 07001 62 DIN 51381 60D36 4 D1401 43 IP 13 13 IP 161 41-69 NFM 07002 6 DIN 51406 43D56 5 D1403 44 IP 14 26 IP 163 32 NFM 07003 15 DIN 51408 58D70 5 D1478 44 IP 15 12 IP 170 69 NFM 07004 20 DIN 51411 15D86 6 D1480 44 IP 16 53 IP 177 30 NFM 07007 19 DIN 51421 53D88 8 D1500 45 IP 23 18 IP 179 34 NFM 07010 25 DIN 51550 21D91 8 IP 34 10 IP 195 36 NFM 07012 27 DIN 51551 15-63D92 9 D1552 45 IP 36 9 IP 196 44 NFM 07013 32 DIN 51560 46D93 10 D1657 46 IP 40 27 IP 212 46 NFM 07015 14 DIN 51565 18D95 11 D1665 46 IP 45 3 IP 219 55 NFM 07019 10 DIN 51571 31D96 11 D1742 47 IP 48 67 IP 227 70 NFM 07020 48 DIN 51575 32D97 12 D1744 47 IP 49 2 IP 229 52 NFM 07021 28 DIN 51577 13D113 13 D1748 47 IP 50 16 IP 235 46 NFM 07024 42 DIN 51578 44D129 13 D1754 48 IP 53 25 IP 236 57 NFM 07025 45 DIN 51579 42D130 14 D1796 48 IP 57 43 IP 237 57 NFM 07026 57 DIN 51580 16D156 15 D1831 48 IP 58 4 IP 243 58 NFM 07028 43 DIN 51580 34D189 15 D1837 49 IP 59 67 IP 265 59 NFM 07031 40 DIN 51581 65

D1838 49 IP 61 13 IP 267 59 NFM 07047 52 DIN 51585 31D217 16 D2001 49 IP 69 19 IP 274 56 NFM 07048 53 DIN 51587 35D240 16 D2002 50 IP 70 67 IP 280 70 NFM 41007 49 DIN 51595 68D244 16 D2003 50 IP 71 21 IP 294 70 NFM 41008 46 DIN 51610 39

D2068 50 IP 72 67 IP 295 32 NFM 41009 58 DIN 51616 41D287 17 D2112 51 IP 74 11 IP 303 61 NFM 41010 41 DIN 51750 62D322 18 D2158 51 IP 80 68 IP 304 5 NFM 41011 54 DIN 51751 6D323 19 D2196 52 IP 107 40 IP 306 70 NFM 41012 49 DIN 51754 20D381 20 D2265 52 IP 123 6 IP 307 70 NFM 41101 39 DIN 51756 57D445 21 D2272 52 IP 131 20 IP 309 71 NFT 30051 72 DIN 51757 41D473 25 D2273 52 IP 132 28 IP 310 43 NFT 60100 21 DIN 51758 10D482 26 D2274 52 IP 135 31 IP 313 60 NFT 60101 41 DIN 51759 14D524 26 D2386 53 IP 138 32 IP 317 51 NFT 60102 28 DIN 51771 40D525 27 D2420 54 IP 142 34 IP 335 72 DIN 51775 28D566 28 D2440 54 IP 143 68 IP 356 62 NFT 60104 44 DIN 51776 20D611 28 D2500 55 IP 146 33 IP 387 50 NFT 60109 13 DIN 51777 47D613 29 IP 154 14 IP 388 52 NFT 60113 11 DIN 51780 27D664 30 D2595 55 IP 156 42 IP 398 63 NFT 60116 15 DIN 51789 25D665 31 D2602 56 IP 157 35 IP 411 49 NFT 60117 26 DIN 51791 42D721 31 D2619 56 IP 419 72 NFT 60118 9 DIN 51793 48D808 31 D2624 56 NFT 60119 34 DIN 51799 32D850 32 D2669 57 ISO page ISO page NFT 60120 31 DIN 52010 2D873 32 D2699 57 NFT 60123 42 DIN 52011 4D874 32 D2700 57 ISO 1523 52 ISO 3997 2 NFT 60125 43 DIN 52013 13D877 32 D2711 57 ISO 2049 44 ISO 4256 41 NFT 60129 33D892 33 D2784 58 ISO 2137 16 ISO 4257 39 NFT 60132 16 AUTRES pageD893 33 D2872 58 ISO 2160 14 ISO 4260 58 NFT 60140 43

D2893 58 ISO 2176 28 ISO 4262 26 NFT 60143 32 UOP 357 73D937 34 D2983 59 ISO 2192 40 ISO 4263 35 NFT 60149 60 SAE J300 61D941 34 D3230 59 ISO 2592 9 ISO 4625 4 NFT 60150 35 CEC L40 65D942 34 D3235 59 ISO 2719 10 ISO 5163 57 NFT 60151 31D943 35 D3278 60 ISO 2908 31 ISO 5164 57 NFT 60152 59D972 36 D3427 60 ISO 2977 28 ISO 6246 20 NFT 60154 47

D3828 61 ISO 3007 19 ISO 6247 33 NFT 60157 33D1078 36 D3829 61 ISO 3013 53 ISO 6251 49 NFT 60161 65D1142 37 D3948 61 ISO 3014 43 ISO 6296 47 NFT 66004 2D1160 37 D4007 61 ISO 3015 55 ISO 6297 56 NFT 66006 13D1177 38 D4057 62 ISO 3016 12 ISO 6298 43 NFT 66007 5D1217 38 D4287 62 ISO 3104 21 ISO 6299 52 NFT 66008 4D1263 38 D4377 62 ISO 3170 62 ISO 6614 43 NFT 66009 69D1264 39 D4530 63 ISO 3405 6 ISO 6615 15 NFT 66011 3D1265 39 D4684 64 ISO 3675 34-41 ISO 6616 37 NFT 78102 38D1266 40 D4860 64 ISO 3675 17 ISO 6619 30D1267 41 D5133 64 ISO 3679 61-72 ISO 6620 49D1298 41 D5191 64 ISO 3733 11 ISO 7120 31

D5293 65 ISO 3734 48 ISO 7536 27D1319 42 D5800 65 ISO 3735 25 ISO 9030 61

D6082 65 ISO 3837 42 ISO 9262 59D6371 66 ISO 3987 32 ISO 10370 63

ISO 3992 42 ISO 12205 52ISO 3993 46

Catalogo Completo Normalab

Documents

Transcript of Catalogo Completo Normalab