Catalog_Lumesa_SA_Englisch_2003
-
Upload
razvan-vartolomei -
Category
Documents
-
view
202 -
download
7
Transcript of Catalog_Lumesa_SA_Englisch_2003
Lumesa SADrilling Technology
CH-6533 LuminoTel. +41 (0)91 829 26 41Fax +41 (0)91 829 37 [email protected]
DrillingTechnology
Type of machine Powered with Feed force Application PageSIG-Mounty 90 LL Air 7 kN / 6 bar Rock drilling Page 3SIG-Mounty 90 H Hydraulic 12 kN Casing Ø 113 mm Pages 4 – 5SIG-Mounty 91 H Hydraulic 20 kN Casing Ø 143 mm Pages 6 – 7SIG-Mounty 92 H Hydraulic 40 kN Casing Ø 143 (178) mm Pages 8 – 9
LUMESA SA Tecnica di perforazione Telefono +41 (0)91 829 26 41Via Cantonale Drilling Technology Telefax +41 (0)91 829 37 01CH-6533 Lumino E-mail [email protected]
2
LUMESA SASwiss product
During the execution of avalanche protection works in 1985 in the Swissmountains, a problem arose.
There they had to carry out jobs, which were usually done with heavy crawlermounted drill rigs.
The problem was solved. Today we have a great variety of components thatallows us to build 4 different sizes of machines in a modular system.
We have components weighting 40 – 50 kg for the lightest machine (Max.torque 1400 Nm) as well as components weighting 80 – 120 kg for the morepowerful machine (max. torque 5000 Nm).
Please do not forget that tools, drill rods and tubes can reach fast 1 ton weightand will raise the weight of the machine as well.
This presupposes a decision of what kind of equipment you need and usuallyyou have to search for the right combination of hammer, rods and tubes forthe machine.
Because portable anchor machines behave different as heavy crawlermounted drill rigs, we suggest you use our tools and working procedure.
Possibilities with our machines
The performance is sometimes extremely high by using optimised weightcomponents:
– Hammer drilling 40 – 60 l/min 200 bar ca. 10-15 kW– Diamond core drilling 60 – 100 l/min 200 bar ca. 20-40 kW
– Rock drilling with normal hammer Ø 30 to 50 mm– Down-the-hole hammer drilling Ø 64 to 165 mm (178 mm)
with casing Ø 113 to 143 mm (178 mm)– jet grouting– soil test drilling – single tube core barrel until 146 mm
– double tube core barrel until 146 mm– continuous coring – rotary drilling – three-wing bit
– rotary bitWe have also light, air driven machines for light drilling jobs, like rock drilling,bolting, tension rods.
Drilling philosophy with portable machines
LUMESA SASwiss product
SIG 2000/90 LL-CAVASuitable for block cutting in the quarry
LUMESA SA Tecnica di perforazione Telefono +41 (0)91 829 26 41Via Cantonale Drilling Technology Telefax +41 (0)91 829 37 01CH-6533 Lumino E-mail [email protected]
3
SIG-Mounty 2000/90 LLWith fixing plate 93 on scaffolding for bolting
SIG Mounty 2000/90 LL air driven
SIG-MOUNTY 2000/90 LL Cava
– Standard chain feed, feed length 2,3 m(1. Integral drill Steel 2.40 m, 2. Integral 4.00 m)Feed Force 7 kN / 6 bar
– Rail carrier, length 6 m (4+2 m), with legs
– Drill rig positioning with air motor
– Control panel with lubricator and hoses
– Drill drifter SIG PLB 24 K
SIG-MOUNTY 2000/90 LL
– Chain feed, scaffolding base and combi guide Feed force 7 kN/6 bar
– Rotary head 900 Nm/6 bar
– Control panel with lubricator and hoses
– Backstay 2,2 – 3,6 m
Customer designed solution
Lumesa SA Tecnica di perforazione Telefono 091 829 26 41Via Cantonale Drilling Technology Telefax 091 829 37 01CH-6533 Lumino E-mail [email protected]
4
SIG Mounty 2000/90 HAVALANCHES RETAINING, RENOVATIONS
Light drilling unit for works on scaffoldings:
Bolting, tension rodsRock drillingMicropile drillingCore drillingSoil test drillingContinuous drilling
STANDARD CASING Ø 113 mm
SIG-MOUNTY 2000/90 H
(Standard equipment)
– Chain feed, scaffolding base and combi guide– Rotary head 1400 Nm (max)– Control panel with lubricator and hydraulic hoses (20+7 m)– Powerpack Diesel 2 Cyl. ,16 kW (max)– Special rack backstay
OPTIONALS
– Hydraulic hoses extension 20 m
– Hydraulic hoses extension 40 m
– Powerpack Diesel 91 H, 22 kW, 4 Cyl., water-cooled
– Hydraulic clamp HZ 100 (force 100 kN)
PERFORMANCES
– Drilling unit 90 H: Feed force max. 12 kN– Rotary head NL3: Max. torque 1400 Nm– Powerpack 90 H: Max. power rating DIN 70020 N = 16 kW/3000 min-1
Continuous power rating DIN 6270 NB = 15 kW/3000 min-1– Hydraulic: Capacity max. 41 l/min
Pressure 200 bar
LUMESA SASwiss product
Feed length standard:– 1300 mm– 1800 mm– 2300 mm
Feed len
gth +855
5
CASING SYSTEMLUMESAFOR SOFT GROUNDS(Humus with roots, sand)
Anchor works with casing system Lumesa on scaffolding
Casing Ø 113 mm with core bit Ø 116 mm (combiguide open)
Drilling with down-the-hole hammer inside the casing
Drill rig 90 H with overburden drilling system LumetrixDrill rig 90 H on scaffolding
Powerpack 90 H
LUMESA SASwiss product
LUMESA SA Tecnica di perforazione Telefono +41 (0)91 829 26 41Via Cantonale Drilling Technology Telefax +41 (0)91 829 37 01CH-6533 Lumino E-mail [email protected]
6
SIG Mounty 2000/91 HDRILL RIG FOR EXCAVATOR
Anchor hole drillingMicropile drillingOverburden drillingCore drillingContinuous core drillingHigh-pressure grouting
STANDARD CASING Ø 143 mm
SIG-MOUNTY 2000/91 H
(Standard equipment)
– Chain feed, scaffolding base and combi guide– Rotary head 1800 Nm (max)– Control panel with lubricator and hydraulic hoses (20+7 m)– Powerpack Diesel 4 Cyl., 22 kW (max), water-cooled– Special rack backstay
OPTIONALS
– High speed rotary headSL 13 560 Nm /200 Min-1SL 14 460 Nm/280 Min-1SL 15 260 Nm/460 Min-1SL 16 220 Nm/630 Min-1
– Powerpack 4 Cyl., 33 kW, water-cooled– Hydraulic clamp HZ 180 (force 180 kN)
Excavator fixing plate: – feed extension 300 mm– feed swing ± 90°
PERFORMANCES
– Drilling unit 91 H: Feed force max. 20 kN– Rotary head NL2: Max. torque 1800 Nm– Powerpack Diesel 91 H: Max. power rating DIN 70020 N = 24 kW / 3600 min-1
Continuous power rating DIN 6270 NB = 22 kW / 3600 min-1– Powerpack 91 H electrical: Continuous power rating 22 kW– Hydraulic: Capacity 62 l/min
Pressure 200 bar
Feed length standard:– 1300 mm– 1800 mm– 2300 mm
Feed len
gth +920
Control panel 1/2’’
Compact drilling unit for jet grouting (injection pressure 600 bar)
Anchor drilling with continuous injection (Ischebec)
Powerpack 91 H
Excavator fixing plate
Special mini drilling rig (injection pressure 600 bar)
LUMESA SASwiss product
LUMESA SA Tecnica di perforazione Telefono +41 (0)91 829 26 41Via Cantonale Drilling Technology Telefax +41 (0)91 829 37 01CH-6533 Lumino E-mail [email protected]
8
SIG Mounty 2000/92 HDRILLING UNIT FOR HEAVY WORKS
Anchor hole drillingMicropile drillingOverburden drilling
STANDARD CASING Ø 143 mm(Ø 178 mm)
SIG-MOUNTY 2000/92 H
(Standard equipment)
– Chain feed, scaffolding base and combi guide– Rotary head NL1a, 5000 Nm (max)– Control panel with lubricator and hydraulic hoses (20+7 m)– Powerpack Diesel 4 Cyl., 33 kW (max), water-cooled– Special rack backstay
OPTIONALS
– High speed rotary headSL 12 680 Nm/310 Min-1SL 13 560 Nm/400 Min-1SL 14 400 Nm/540 Min-1SL 15 260 Nm/780 Min-1
– Hydraulic clamp HZ 180 (force 180 kN)– Powerpack 94 H 3 Cyl. Hatz phone isolated 36 kW– Road traffic licensed (80 km/h)
PERFORMANCE
– Drilling unit 92 H: Feed force max. 40 kN– Rotary head NL1a: Max. torque 5000 Nm– Powerpack Diesel 93 H: Max. power rating DIN 70020 N = 35 kW/3000 min-1
Continuous power rating DIN 6270 NB = 33 kW/3000 min-1– Powerpack 92 H electrical: Continuous power rating 30 kW– Hydraulic: Capacity max. 100 l/min
Pressure 200 bar
Feed length standard:– 1300 mm– 1800 mm– 2300 mm
Feed len
gth +101
0
9
OVERBURDEN DRILLING SYSTEM LUMETRIX – MAXBIT FORHEAVY GROUNDS WITHROCKBOULDERS
Overburden drilling system Lumetrix-Maxbit
Built on drill rig on excavatorwith ± 180 ° rotation
Built on drill rig
Powerpack 93 H
Pile Ø 205 mm x 20 m
Hydraulic clamp HZ 180
Road traffic licensed (until 80 km/h)
LUMESA SASwiss product
LUMESA SA Tecnica di perforazione Telefono +41 (0)91 829 26 41Via Cantonale Drilling Technology Telefax +41 (0)91 829 37 01CH-6533 Lumino E-mail [email protected]
10
OptionalsPOWERPACK 94 H
(3 Cyl. Diesel Hatz, phone isolated)
Continuous power rating
DIN 6270 NB 36 kW/2600 Min-1Hydraulic: Capacity 100 l/minPressure: 200 bar
HYDRAULIC CASING PULLING UNIT
1. Base plate
2. Hydraulic pulling cylinderForce 400 kN/200 bar
3. Taper chuck
4. Pulling slipØ 170 mmØ 176 mmØ 113 mmØ 143 mm
LUMESA SASwiss product
LUMESA SA Tecnica di perforazione Telefono +41 (0)91 829 26 41Via Cantonale Drilling Technology Telefax +41 (0)91 829 37 01CH-6533 Lumino E-mail [email protected]
11
Excavator fixing plateFOR DRILL RIG 91 H AND 92 H
The excavator fixing plate is used to mount the drill rig on a main machine, like a dumper or an excavator.
For the change from vertical down in vertical up drilling, the drill rig can be turned by 180° withview manipulations.
Drill rig swing lateral: ± 90° by the vertical lineDrill rig swing frontal: bucket movement
movement of the tilting pistonDrill rig axial movement: 300 mm axial hydraulic piston
Size 6: Drill rig 91 H up to feed length 1.8 m: 1800 Nm (UP6-91)
Size 7: Drill rig 91 H from feed length 2.3 m: 1800 Nm (UP7-91)Drill rig 92 H: 5000 Nm (UP7-92)
Power drive: – Using the hydraulic system of the main machine– With external power pack
Steering:
Type A: Control of all the drill rig's movements on the control panel – which can be placed in order to allow the drill master to have an ideal view.
on the control panel: – Drill rig swing– Drill rig extract– Chain advance– Rotary head rotation– Hydraulic clamp
Type B: Movement of the drill rig on main machine.Working movements of the drilling proceedings on control panel
on the control panel: – Rotary head rotation– Chain advance– Hydraulic clamp
on main machine: – Feed rotation– Feed swing(Connected on the bucket, movement selectedwith hydraulic valve)
Type C: all the movements integrated on the main machine.
Dumper Excavator
LUMESA SASwiss product
LUMESA SA Tecnica di perforazione Telefono +41 (0)91 829 26 41Via Cantonale Drilling Technology Telefax +41 (0)91 829 37 01CH-6533 Lumino E-mail [email protected]
12
Universal rock drill UBH 90
Universal rock drill UBH 90 for self drilling anchor.Compatible with all Lumesa portable drilling machines.
UBH 90 Hydraulic
– Piston diameter 90 mm, Length 55 mm– Air percussion 2 500 Min-1
Air consumption 4 m3/min at 6 bar– Separate hydraulic rotation with 500 Nm torque max.– Built in flushing head for injections– Threaded connection possible for
Ischebec Ø 30 / Ø 40Ibo anchor R 25 / R 32 / R 38
with 1 pc. hydraulic clamp HZ 50 (force 50 kN)
UBH 90 air
– Piston diameter 90 mm, Length 55 mm– Air percussion 2 500 Min-1
Air consumption 4 m3/min at 6 bar– Separate air rotation with 250 Nm torque max.– Built in flushing head for injections– Threaded connections possible for
Ischebec Ø 30 / Ø 40Ibo anchor R 25 / R 32 / R 38
LUMESA SASwiss product
LUMESA SA Tecnica di perforazione Telefono +41 (0)91 829 26 41Via Cantonale Drilling Technology Telefax +41 (0)91 829 37 01CH-6533 Lumino E-mail [email protected]
13
ZIMMERMANN DOWN-THE-HOLE HAMMERAND ACCESSORIES
ZIMMERMANN THZ aL 76 Rd 40
Button bit Karbo Ø 76 mm
Drill pipe Ø54 mm Rd 40 l = 1.0 m l = 1.5 ml = 2.0 m
Adapter Rd 50/Rd 40API/Rd 40
Injector Rd 40
ZIMMERMANN THZ 85THZ aL 85 Rd 50 or API 2 3/8’’Button bit Karbo Ø 85 mm
Ø 92 mmØ 100 mmØ 110 mmØ 120 mm
Check valve Rd 50/Rd 50API/API
Injector Rd 50/Rd 50API/APIRd 50/API 2 3/8’’
Adapter Rd 50/API 2 3/8’’ female-femalemale-male
Drill pipe Ø 70 Rd 50 l = 1,0 ml = 1,5 ml = 2,0 ml = 3,0 m
Drill pipe Ø 76 API 2 3/8’’ I = 1,0 ml = 1,5 ml = 2,0 ml = 3,0 m
Rod keyCopper sprayFishing spear
ZIMMERMANN THZ al 110 API 2 3/8’’Button bit Karbo Ø 110 mm
Ø 120 mmØ 130 mmØ 150 mmØ 165 mmØ 185 mm
Injector API 2 3/8’’ female – API 2 3/8’’ male
LUMESA SASwiss product
LUMESA SA Tecnica di perforazione Telefono +41 (0)91 829 26 41Via Cantonale Drilling Technology Telefax +41 (0)91 829 37 01CH-6533 Lumino E-mail [email protected]
14
Mechanism:
Overburden Drilling System Lumetrix
OVERBURDEN DRILLING SYSTEMLUMETRIX 90
OVERBURDEN DRILLING SYSTEMLUMETRIX 115
CASING Ø 114.3 x 6.5
– Down-the-hole hammer Bulroc XL 3
– Lumetrix 90 guide deviceExcenter bit Ø 125 mm
– Drill pipe Ø 76 x 1.0 m API 2 3/8"Ø 76 x 1.5 m API 2 3/8"
– Casing guide Ø 114.3 mm
– Casing Ø 114.3 x 6.5 x 1080 with shoe Ø 114.3 x 6.5 x 1.0 m leftØ 114.3 x 6.5 x 1.5 m left
– Casing protection piece Ø 114.3 mm
– Casing extractor
CASING Ø 139.7 x 7.1
– Down-the-hole hammer Bulroc XL 4
– Lumetrix 115 guide deviceExcenter bit Ø 152 mm
– Drill pipe Ø 76 x 1.0 m API 2 3/8"Ø 76 x 1.5 m API 2 3/8"
– Casing guide Ø 139.7 mm
– Casing Ø 139.7 x 7.1 x 1080 with shoeØ 139.7 x 7.1 x 1.0 m leftØ 139.7 x 7.1 x 1.5 m left
– Casing protection piece Ø 139.7 mm
– Casing extractor
LUMESA SASwiss product
LUMESA SA Tecnica di perforazione Telefono +41 (0)91 829 26 41Via Cantonale Drilling Technology Telefax +41 (0)91 829 37 01CH-6533 Lumino E-mail [email protected]
15
Groutpumps SIG-JET
SIG-JET 2000/91 L
(air driven)
– Mixer motor with sack opener and water dosage (kg 50)
– Mixer (kg 47)
– Grout pump (kg 73)
– Air consumption 4 m3/min (7 bar)
SIG-JET 2000/91 E
(Electric and hydraulic driven)
– Mixer motor with sack opener and water dosage 2.2. kW (kg 57)
– Mixer (kg 47)
– Grout pump 1.5 kW (kg 96)
Performances:
– Injection pressure max. 30 bar
– Max. grain size 2.5 mm
– Max output 30 sacks of 40 kg/hour
– Pressure loss horizontal 1 bar/6 mvertical 1 bar/4m
The machines are normally delivered with a 75 min-1 mixer for mortar.For cement mixtures a turbomixer can be applied.By order please indicate.
Advantages: Though screw pump Drive unit: ElectricVolumetric water dosage HydraulicVariable output Air
Biasca
Airolo
Locarno
Lugano
Chiasso
LUMESA SADrilling TechnologyLumino/TI
Ferrovia
Strade principali
Punti franchi
Aeroporti
Elicentro
Huckepack
Milano
Chur
S. Bernardino
Zürich
Gotthard
Autostrade
Lucomagno
Bellinzona
BERN
GENEVE
ZÜRICH
ITALIA
FRANCEÖSTERREICH
DEUTSCHLAND
BASEL
BELLINZONA
from motorway N2 / motorway N13Exit: BELLINZONA NORD
Then follow indications LUMINO
On your left side before entering Lumino.
ARRIVING BY CAR: