Cataloge 2008_2009 Without Price, English

Energy of the futureEnergy of the futureS O L A R T E C H N I K

Turning tothe sunTurning tothe sun

Contents S O L A R T E C H N I K

Our corporate philosophy.................................................................................... 3

Directions/Map............................................................................................................... 4

GEO-TEC in Spittal........................................................................................................ 5

High-Grade Steel Frame Collectors............................................................ 6-14

Aluminium Frame Collectors............................................................................. 15-22

Wood Frame Collectors ........................................................................................... 23-25

Solar Stations .................................................................................................................. 26-29

Accessories ......................................................................................................................... 30-35

Solar Control Modules ............................................................................................. 36-39

Storage Units, Buffers & Accessories...................................................... 40-50

Storage Units and Heat Exchangers ......................................................... 51-52

Plate-type Heat Exchangers.............................................................................. 53

Tubing & Insulating Systems .......................................................................... 54-56

Stoves....................................................................................................................................... 58-61

Trade Fair and Promotional Items............................................................... 62

Solar Set................................................................................................................................ 63

General Terms and Conditions of Business........................................ 64-66

Solar Collector Systems......................................................................................... 67

Trade Fair IHS 2007 ................................................................................................... 68-69

Tinox Absorbers ............................................................................................................. 70-71

2 Geo-Tec Solartechnik GmbH • Villacherstraße 95 • 9800 Spittal/Drau • Telephone: +43 (0) 4762/61399-0 • Fax: DW 90 • E-mail: [email protected] • www.geotec.at

S O L A R T E C H N I K

3Subject to setting and printing errors. Prices do not include VAT.

Our corporate philosophy S O L A R T E C H N I K

GEO-TEC Solartechnik GmbH is a producer of high-quality solar collectors. Our endeavour is to create a basisof trust with our customers and to assist in solving theirproblems. This is guaranteed by great developmentcompetence, creativity and flexibility.

Satisfied customers are a concern for us. Our task isto deal with customer orders with the utmost of care.Through accommodating customer service and bysupplying high-quality products, our aim is to enter along-term and productive partnership with ourcustomers.

Precise target specifications are applied to improve thequality of our products and services such that positivechanges can be continuously compared and measured.As a result, continuous quality improvements and verygood competitiveness are produced. All suggestions andrecommendations are taken very seriously and checkedfor their feasibility.

Due to our products, the issue of sustainability is alwayspresent. Very conscious of our ecological responsibility toour following generations, in all of our businesssegments we make an effort to contribute toward goingeasy on our resources in a sustainable fashion.

4

Directions/Map S O L A R T E C H N I K

Directions for finding us:

GEO-TEC Solartechnik GmbHVillacher Straße 95A-9800 Spittal an der Drau

Coming by car:Autobahn A 10 (Tauern autobahn) - exit Spittal EAST (OST)Take the first exit on the right onto the B B100 ("Drautal-Bundesstrasse").At the two roundabouts (the 2nd exit) after the 1st traffic light on Villacher street, you will find our companyGEO-TEC past the 1st traffic light on Villacher Street.


Spittal/Drau

München

Salzburg

Villach

5


High-rise rack warehouse Storage space

S O L A R T E C H N I KS O L A R T E C H N I K

Frame Roll-formed high-grade steel profileEdge guard around the perimeterVentilation through specially designedriveting nuts

Glass Clear TSG solar glassGlued without frame

Back panel Aluminium, 0.6 mmAbsorber Tinox, ultrasonic sealed

Manifold, 22 mmHarp-shaped absorber pipes,12/25 Stk. @ Ø 6 mm

Insulation Back panel: 40 mm rock woolSides: 10 mm rock wool

Connections 3/4" outside thread, 3/4" coupling ringAssembly •In-roof design

•Roof-mounted, parallel to roof (hangerbolts and/or roof bracket, fold clamp)

•Roof-mounted, raised•Flat roof, standing

Dimensions Length: 1985 mmWidth: 985 mmHeight: 77 mm

Gross surface area 1,985 x 0,985 = 1,96 m2

Absorber area 1,955 x 0,955 = 1,87 m2

Collector volume 1 litreSurface area utilised 96 %Collector efficiency 81 %Weight 36 kgVerification Rapperswil C572Verification Solar Keymark (on order!)

6


GSE 2000/TIN H/TIN Q

Geo-Tec Solartechnik GmbH • Villacherstraße 95 • 9800 Spittal/Drau • Telephone: +43 (0) 4762/61399-0 • Fax: DW 90 • E-mail: [email protected] • www.geotec.at

High-Grade Steel Frame Collectors S O L A R T E C H N I K

A collector without covering frame for in-roof, (only GSE 2000/ TIN H) roof-mounted,and flat-roof installation.

Customised concatenation is possible (in parallel and in series) Connections: 3/4" screwed connection with high-temperature seal, flat-sealing

GSE2000/TIN H GEO-TEC high-performance collector, high-grade steel, „vertical“ Up to ten collectors can be combined as a collector field.

GSE2000/TIN Q GEO-TEC high-performance collector, high-grade steel, „horizontal“ Up to five collectors can be combined as a collector field.

Article number Article ID PU500100 GSE2000/TIN H vertical-format collector 1 pallet 12 pcs500101 GSE2000/TIN Q horizontal-format collector 1 pallet 12 pcs

High-Grade Steel Frame Collectors

7


GSE 2.0/TIN H

Subject to setting and printing errors. Prices do not include VAT.





Manifold, 22 mmHarp-shaped absorber pipes,13 Stk. @ Ø 6 mm


Connections 3/4" outside thread, 3/4" coupling ringAssembly •Roof-mounted, parallel to roof (hanger

bolts and/or roof bracket, fold clamp)or roof brackets, fold clamp)

•Roof-mounted, raised•Flat roof, Standing


Gross surface area 2,1 m2

Absorber area 2,00 m2

Collector volume 1 litreSurface area utilised 96 %Collector efficiency 81 %Weight 37 kgVerification Rapperswil C572Verification Solar Keymark (on order!)

A collector without covering frame for roof-mounted, and flat-roof installation. Customised concatenation is possible (in parallel and in series) Connections: 3/4" screwed connection with high-temperature seal, flat-sealing

GSE2.0/TIN H GEO-TEC high-performance collector, high-grade steel, „vertical“ Up to ten collectors can be combined as a collector field.

Article number Article ID PU500110 GSE2.0 TIN/H vertical-format collector 1 pallet 12 pcs


Edelstahlrahmenkollektoren S O L A R T E C H N I K

GSE 2400/TIN H/TIN Q

A collector without covering frame for in-roof, (only GSE 2400/ TIN H) roof-mounted, and flat-roofinstallation.

Customised concatenation is possible (in parallel and in series) Connections: 3/4" screwed connection with high-temperature seal, flat-sealing

GSE2400/TIN H GEO-TEC high-performance collector, high-grade steel, vertical Up to ten collectors can be combined as a collector field.

GSE2400/TIN Q GEO-TEC high-performance collector, high-grade steel, horizontal Up to four collectors can be combined as a collector field.




Manifold, 22 mmHarp-shaped absorber pipes,12/31 Stk. @ Ø 6 mm


Connections 3/4" outside thread, 3/4" coupling ringAssembly •In-roof design

•Roof-mounted, parallel to roof (hangerbolts and/or roof bracket, fold clamp)or roof brackets, fold clamp)



Gross surface area 2.410 x 0.985 = 2.38 m2

Absorber area 2.380 x 0.955 = 2.273 m2

Collector volume 1.2 litreSurface area utilised 96 %Collector efficiency 81 %Weight 44 kgVerification Rapperswil C572Verification Solar Keymark (on order!)

Article number Article ID PU500400 GSE2400/TIN Hvertical-format collector 1 pallet 12 pcs500600 GSE2400/TIN Q horizontal-format collector 1 pallet 12 pcs



GSE 2000/TIN SLIM

A collector without covering frame for roof-mounted and flat-roof installation Connections: 3/4" screwed connection with high-temperature seal, flat-sealing

GSE 2000/TIN SLIM GEO-TEC high-performance collector, high-grade steel, horizontal Up to five collectors can be combined as a collector field.

Article number Article ID PU500200 GSE2000/TIN SLIM vertical-format collector 1 pallet 24 pcs




Manifold, 22 mmHarp-shaped absorber pipe, 6 mm


Connections 3/4" outside thread, 3/4" coupling ringAssembly •Roof-mounted and parallel to roof

(with hanger bolts or roof brackets,fold clamp)

•Roof-mounted, raisedDimensions Length 1985 mm

Width: 385 mmHeight: 77 mm

Gross surface area 0.764 m2

Absorber area 0.691 m2

Collector volume 0.4 litreSurface area utilised 96 %Collector efficiency 75 %Weight 16 kgVerification Rapperswil C645


High-Grade Steel Frame Collector S O L A R T E C H N I K

Connecting Materials

Connection Set, left/rightAll parts made of brass, sensor immersion sleevesoldered in, incl. high-temperature seals, designfor left or right solar forward flow.

All sealing points are flat-sealing. 3/4" connections

Consists of: Corner sleeve (3/4" coupling ring/ 3/4" outside thread, flat-sealing) Sensor right-angle connection (3/4" coupling ring/ 3/4" outside thread, Sensor immersion sleeve Ø 6.2 mm) Plug (3/4" outside thread, flat-sealing) End cap (3/4" internal thread , flat-sealing )

Connection Hose SetConsists of: High-grade steel corrugated tube DN 16, 1000 mm, 2x 3/4"

Rubber insulation 13 mm High-grade steel corrugated tube DN 16, 1000 mm, 2x 3/4"

Rubber insulation 13, with sensor cable drawn in,PT1000 (silicon) 1500 mm

1 double nipple 3/4" flat-sealing 4 high-temperature solar seals

Transition to high-grade steel corrugated tube or copper tube bymeans of Easy-Drill screwed connection (see delivery programme,tube and insulating systems).

Plastic-packed as set, suitable for indoors and outdoors

Article number DescriptionSets:11000100 Connection set for solar forward flow, left11000200 Connection set for solar forward flow, rightIndividual parts:11000001 Right-angle connector, universal11000006 Right-angle connector, universal, with coupling nut11000021 Right-angle connector, right, with sensor immersion sleeve11000022 Right-angle connector, left, with sensor immersion sleeve11000003 End cap11000004 End plug11000005 High-temperature seal 3/4", 24 x 17 x 1.5 mm510305 Sealing plates

Article number Article ID11001000 Connection Hose Set



Installation Materials

T-profile for mounting high-grade steel frame collectorswith vertical or horizontalformat

Bare aluminium , in fixed lengths Slotted , 50 mm Corrugated gripping side 50 x 50 x 5 mm

HANGER BOLT System

High-grade steel Completely pre-assembled for installa-

tion of the aluminium T-profile withor without connecting profile

Length : 350 mm, Ø 12 mm Aluminium clamp EPDM tile sealing rubber Stainless steel nuts and shims

VL H Aluminium connecting rail for stabilising T-profiles 2163 mm for GSE 2000 H and GSE 2.0, 2588 mm for GSE 2400 H For fast mounting of flat collectors vertical For roof bracket installation One connecting rail is required per collector

VLQ Aluminium connecting rail for

stabilising T-profiles 1163 mm for GSE 2000Q and GSE 2400 Q For fast mounting of flat collectors, horizontal For roof bracket installation Two connecting rails are required per collector.

CONNECTING RAIL

Article number Collectors Dimensions77000201 Roof bracket complete, preassembled77000101 Hanger bolt, complete, pre-assembled77082301 Connecting rail, vertical77082302 Connecting rail, horizontal77082305 Connecting rail for GSE 2400 H520702 T-PROFILE for 2 vertical 2034 mm520703 T-PROFILE for 3 vertical 3051 mm520710 T-PROFILE for 6 vertical 6102 mm520701 T-profile for 1, horizontal 2018 mm520730 T-profile for 2, horizontal 4036 mm520740 T-profile for 3, horizontal 6054 mm520731 T-profile for 1 horizontal GSE 2400 2442 mm520732 T-profile for 2 horizontal GSE 2400 4884 mm -

ROOF BRACKET System

Aluminium base, 180 mm,50/40/10 mm perforated

Aluminium bracket for mounting thealuminium T-profile with connectingprofile

Complete with stainless steelconnecting bolts and aluminiumclamp-type holder




KV 2 Clamp Connector Set

Clamp Connector Set for connecting aluminium T-profiles and FDRA 70 mm wide 2 drilled holes 12.5 mm With stainless steel bolts, nuts and shims

Fold clamp

Bare aluminium 125 mm

Hanger bolt / flange plate

High-grade steel Completely preassembled with flange and seal Length : 350 mm, Ø 12 mm

METAL CLADDING SET (basic set & extended set)for vertical-format collectors GSE 2000H and GSE 2400H

Aluminium, "prefa brown" Packed in cardboard box with installation instructions Suitable for roofs with an incline of at least 30° Only for GSE 2000H and GSE 2400H Basic set for two collectors each Extension set for every additional collector

Article number Collectors77000302 Clamp Connector Set (2 units)77099503 Fold clamp77000200 Hanger bolt/flange plate

Article number Description Dimensions Weight520500 Basic set GSE 2000H 200/350/2030 9 kg520510 Extension set GSE 2000H 200/350/2030 3 kg

520520 Basic set GSE 2400H 200/350/2500 10 kg520530 Extension set GSE 2400H 200/350/2500 4 kg




Flachdachfreirahmenaufstellung For flat roofs, industrial buildings, etc. For mounting on concrete base or I-beams The substructure, fastening and bracing have to be

provided by the customer. Statics-tested support structure Consists of aluminium angle profiles, 40/40/4mm, bare T-profiles are already included With stainless steel bolts and assembly instructions Partially pre-assembled Plastic-packed and labelled Sets for multiple collectors

Sets for various support structure variations: 2, 3 or 6 GSE 2000H 45° 2, 3 or 6 GSE 2000H 60° 2, 3 or 6 GSE 2400H 45° 2, 3 or 6 GSE 2400H 60° 1, 2 or 3 GSE 2000Q 45°

Article number Description Dimensions Weight520410 FDFRA for 2 GSE 2000H 45° 2200/100/150 mm 15 kg520420 FDFRA for 3 GSE 2000H 45° 3200/200/150 mm 20 kg520432 FDFRA for 6 GSE 2000H 45° 6200/200/150 mm 40 kg

520460 FDFRA for 2 GSE 2000H 60° 2200/200/150 mm 15 kg520480 FDFRA for 3 GSE 2000H 60° 3200/200/150 mm 20 kg520470 FDFRA for 6 GSE 2000H 60° 6200/200/150 mm 40 kg



520430 FDFRA for 1 GSE 2000Q 45° 2200/200/150 mm 12 kg520411 FDFRA for 2 GSE 2000Q 45° 4400/200/150 mm 24 kg520400 FDFRA for 3 GSE 2000Q 45° 6200/200/150 mm 36 kg

520490 FDFRA for 1 GSE „SLIM“ 45° 450/200/150 mm 9 kg520495 FDFRA for 1 GSE 2400Q 45° 2450/200/150 mm 24 kg520496 FDFRA for 2 GSE 2400Q 45° 4900/200/150 mm 48 kgNote:For four collectors, be sure to use two double-unit sets + one KV 2 connection set.For five collectors, use one double-unit set and one triple-unit set + one KV 2 connection set.




20° Inclination Can be used for each collector for

hanger bolt and roof bracket Bare aluminium, including high-grade

steel bolts and brackets

Article number Description PU77000401 20° Inclination for GSE 2000H per collector520302 20° Inclination for GSE 2400H per collector77000404 20° Inclination for GSE 2000Q and GSE 2400Q per collector

Article number Description Type77035500 Concrete ballast 180x26x16 per 0,18 tons vertical77035501 Concrete ballast 110x26x16 per 0,12 tons horizontal

Concrete ballast

Concrete ballast for the fasteningof the substructure for collectors(free-standing rooftop frameinstallation)

Weight per concrete base:180 kg or 120 kg

Note:In the 20° INCLINATIONno T-profile, no connecting rail,no roof bracket and no hangerbolt are included!


Aluminium Frame Collectors S O L A R T E C H N I K

ALU 2000 H/Q/US

Frame Aluminium extruded profile, only one connec-tion on the underside, complete frame baremade of one bent piece of frame profile withvents, high-temperature-resistant junctionseal

Glass TSG solar glass with high-temperature-resistant seal pressed with aluminium profile

Back panel Aluminium/stuccoAbsorber Tinox, ultrasonic sealed

Manifold, 22 mmHarp-shaped absorber pipe,10/20 pcs @ Ø 8 mm

Insulation Back panel: 40 mm rock woolConnections 3/4" outside thread, 3/4" coupling ringAssembly •In-roof design

•Roof-mounted, parallel to roof (hanger boltsor roof brackets, fold clamp)



Gross surface area 2.045 m x 1.045 m = 2.144 m2

Absorber area 2.000 m x 1.000 m = 2.00 m2

Collector volume 1 litreSurface area utilised 93.75 %Collector efficiency 80%Weight 37 kgVerification Arsenal Research; No. 2.04.00201.1.0Verification Solar Keymark (on order!)

A collector suitable for in-roof), modular collector field, roof-mounted and flat-roofinstallation.

Concatenation can be done serially or in parallel fashion. Connections: 3/4" screwed connection with high-temperature seal, flat-sealing

ALU 2000 H/US GEO-TEC high-performance collector vertical Up to 10 collectors can be connected in parallel fashion.

ALU 2000 Q/US GEO-TEC high-performance collector, horizontal format Up to 5 collectors can be connected in parallel fashion.

Article number Article ID PU77002002 ALU 2000 H/US Vertical-Format Collector 1 pallet 12 pcs77003002 ALU 2000 Q/US Horizontal-Format Collector 1 pallet 12 pcs



ALU 2000 H/Q

Frame Extruded aluminium profilesOnly one connection on the lower sideComplete frame bent from piece anodisedFrame profile with vents, high-temperature-resistant junction seal

Glass TSG solar glass with high-temperature-resistantseal pressed with aluminium profile

Back panel Aluminium/stuccoAbsorber Tinox, soldered

Manifold, 22 mmHarp-shaped absorber pipe,10/20 pcs @ Ø 8 mm

Insulation Back panel: 40 mm rock woolConnections 3/4" outside thread, 3/4" coupling ringAssembly •In-roof design

•Roof-mounted, parallel to roof (hanger boltsand/or roof bracket, fold clamp)





Collector volume 1 litreSurface area utilised 93.75 %Collector efficiency 80%Weight 37 kgVerification Arsenal Research; No. 2.04.00201.1.0Verification Solar Keymark (on order!)

A collector suitable for in-roof, modular collector field, roof-mounted and flat-roofinstallation.

Concatenation can be done serially or in parallel fashion. Connections: 3/4" screwed connection with high-temperature seal, flat-sealing

ALU 2000 H GEO-TEC high-performance collector, vertical Up to 10 collectors can be connected in parallel fashion.

ALU 2000 Q GEO-TEC high-performance collector, horizontal format Up to 5 collectors can be connected in parallel fashion.

Article number Article ID PU77002000 ALU 2000 Vertical-Format Collector 1 pallet 12 pcs77003000 ALU 2000 Horizontal-Format Collector 1 pallet 12 pcs



ALU 450 Q

Frame Extruded aluminium profilesOnly one connection on the lower sideComplete frame bent from piece anodisedFrame profile with ventsHigh-temperature-resistant junction seals

Glass TSG solar glass with high-temperature-resistantseal pressed with aluminium profile

Back panel Aluminium/stuccoAbsorber Tinox, soldered

Harp-shaped absorber pipe, 20 pcs @ Ø 8 mmInsulation Back panel: 40 mm rock woolConnections 3/4" outside thread, 3/4" coupling ringAssembly •Installed in roof-mounted fashion or parallel

to roof (hanger-bolt and roof-bracketinstallation)

•Roof-mounted, raised•Flat roof, standing




Collector volume 0.6 litreSurface area utilised 93.75 %Collector efficiency 80%Weight 17 kgVerification Solar Keymark (on order!)

A collector suitable for installation both roof-mounted and parallel to roof. Concatenation can be done serially or in parallel fashion. Connections: 3/4" screwed connection with high-temperature seal, flat-sealing

ALU 450 Q GEO-TEC high-performance collector, horizontal format Up to 5 collectors can be connected in parallel fashion.

Article number Article ID PU77000450 horizontal-format collector 1 pallet 24 pcs



Connecting materials

Connection Set, left/rightAll parts made of brass, sensor immersion sleevesoldered in, incl. high-temperature seals,design for left or right solar forward flow.All sealing points are flat-sealing. 3/4" connections

Consists of: Right-angle connector (3/4" coupling ring / 3/4" outside thread, flat-sealing) Sensor right-angle connection (3/4" coupling ring/ 3/4" outside thread, Sensor immersion sleeve (6.2 mm) Plug (3/4" outside thread, flat-sealing) End cap (3/4" internal thread, flat-sealing)

Connection Hose SetConsists of: High-grade steel corrugated tube DN16, 1000 mm, 2x 3/4" coupling ring,

Rubber insulation 13 mm High-grade steel corrugated tube DN16, 1000 mm, 2x 3/4" coupling ring,

Rubber insulation 13, with sensor cable drawn in,PT1000 (silicon) 1500 mm

1 double nipple 3/4" flat-sealing 4 high-temperature solar seals

Transition to high-grade steel corrugated tube or copper tube by means ofEasy-Drill screwed connection (see delivery programme, tube and insulatingsystems).

Plastic-packed as set, suitable for indoors and outdoors

Article number DescriptionSets:11000100 Connection set for solar forward flow, left11000200 Connection set for solar forward flow, rightIndividual parts:11000001 Right-angle connector, universal11000006 Right-angle connector, universal, with coupling nut11000021 Right-angle connector, right, with sensor immersion sleeve11000022 Right-angle connector, left, with sensor immersion sleeve11000003 End cap11000004 End plug11000005 High-temperature seal 3/4”, 24 x 17 x 1,5 mm510305 Sealing plates

Article number Description11001000 Connection Hose Set



Installation materials

T-PROFILES FOR MOUNTINGaluminium frame collectorswith vertical or horizontalformat

Bare aluminium , in fixed lengths Slotted, 50 mm Corrugated gripping side 50 x 50 x 5 mm

HANGER BOLT System

High-grade steel Completely pre-assembled for instal-

lation of the aluminium T-profilewith or without connecting profile

Length : 350 mm, Ø 12 mm Aluminium clamp EPDM tile sealing rubber Stainless steel nuts and shims

VL H Aluminium connecting rail for stabilising T-profiles Length 2163 mm for ALU 2000H and ALU 2000H/US For fast mounting of flat collectors vertical For roof bracket installation One connecting rail is required per collector

VL Q Aluminium connecting rail as per

drawing, bare Length : 1163 mm for ALU 2000H and ALU 2000H/US For fast mounting of flat collectors, horizontal For roof bracket installation Two connecting rails are required per collector.

CONNECTING RAIL

ROOF BRACKET System

Aluminium base, 180 mm,50/40/10 mm perforated

Aluminium bracket for mounting thealuminium T-profile with connectingprofile

Complete with stainless steelconnecting bolts and aluminiumclamp-type holder

Article number Collectors Dimensions77000201 Roof bracket complete, preassembled77000101 Hanger bolt, complete, pre-assembled77082301 Connecting rail, vertical77082302 Connecting rail, horizontal77099407 T-PROFILE for 2, vertical 2162 mm77099405 T-PROFILE for 3, vertical 3243 mm77099403 T-PROFILE for 6, vertical 6486 mm77099406 T-PROFILE for 1, horizontal 2081 mm77099420 T-PROFILE for 2, horizontal 4162 mm77099421 T-PROFILE for 3, horizontal 6243 mm




KV 2 Clamp Connector Set Clamp Connector Set for connecting aluminium T-profiles 70 mm wide 2 drilled holes 12.5 mm With stainless steel bolts, nuts and shims

Fold clamp Bare aluminium 125 mm

Hanger bolt / flange plate High-grade steel Completely preassembled with Length: 350 mm, Ø 12 mm

METAL CLADDING SET (basic set & extended set)for vertical-format collector ALU 2000H

Aluminium, "prefa brown" Packed in cardboard box with installation instructions Suitable for roofs with an incline of at least 30° Basic set for two collectors each Extension set for every additional collector Metal cladding for horizontal-format collector available "Charcoal" metal cladding available on request

Article number Collectors77000302 Clamp Connector Set (2 units)77099503 Fold clamp77000200 Hanger bolt/flange plate

Article number Description Dimensions Weight12801911 Basic Set ALU 2000H 200/350/2030 12,50 kg12801901 Extended set ALU 2000H 200/350/2030 6,50 kg12801916 Basic Set ALU 2000H übereinander 200/350/2030 12,50 kg12801917 Extended set ALU 2000H übereinander 200/350/2030 6,50 kg12800000 Cosmetic cover strip ALU 2000H 2 kg12800002 Cosmetic cover strip ALU 2000Q 1,20 kg




Flat-roof open-frame set-up

For flat roofs, industrial buildings, etc. For mounting on concrete base or I-beams The substructure, fastening and bracing have to be

provided by the customer. Statics-tested support structure Consists of aluminium angle profiles, 40/40/4, bare T-profiles are already included With stainless steel bolts and assembly instructions Partially pre-assembled Plastic-packed and labelled Sets for multiple collectors

Sets for various support structure variations:

2, 3 or 6 ALU 2000H 45° 2, 3 or 6 ALU 2000H 60° 1, 2 or 3 ALU 2000Q 45°

Article number Description Dimensions Weight77024501 FDFRA for 2 ALU 2000H 45° 2200/100/150 mm 15 kg77034501 FDFRA for 3 ALU 2000H 45° 3200/200/150 mm 20 kg77064501 FDFRA for 6 ALU 2000H 45° 6200/200/150 mm 40 kg

77026001 FDFRA for 2 ALU 2000H 60° 2200/200/150 mm 15 kg77036001 FDFRA for 3 ALU 2000H 60° 3200/200/150 mm 20 kg77066001 FDFRA for 6 ALU 2000H 60° 6200/200/150 mm 40 kg

77014501 FDFRA for 1 ALU 2000Q 45° 2200/200/150 mm 12 kg77000304 FDFRA for 2 ALU 2000Q 45° 4400/200/150 mm 24 kg77001000 FDFRA for 3 ALU 2000Q 45° 6200/200/150 mm 36 kg

77045001 FDFRA for 1 ALU 450Q 45° 450/200/150 mm 9 kg

Note:For four collectors, be sure to use two double-unit sets + one KV 2 connection set.For five collectors, use one double-unit set and one triple-unit set + one KV 2 connection set.




20° Inclination

Can be used for each collector forhanger bolt and roof bracket

Bare aluminium, including high-gradesteel bolts and brackets

Article number Description PU77000401 Inclination 20° for ALU 2000H 1 Set/collector77000404 Inclination 20° for ALU 2000Q 1 Set/collector

Article number Description Type77035500 Concrete ballast 180x26x16 per 0.18 tons vertical77035501 Concrete ballast 110x26x16 per 0.12 tons horizontal

Concrete ballast

Concrete ballast for the fastening ofthe substructure for collectors (free-standing rooftop frame installation)

Weight per concrete base:180 kg or 120 kg

Note:In the 20° inclination noT-profile, no connectingrail, no roof bracket and nohanger bolt are included!


Wood Frame Collectors S O L A R T E C H N I K

IK 2000 / TIN H

IK 2000 / TIN HThe GEO-TEC high-performance collector with woodframe and a collector area of 2.0 m², was designedfor in-roof installation and can be easily integratedinto the room on the roof battens, without a cranefor the installation. A maximum of six modules in arow should concatenated to one another.

Frame WoodGlass TSG solar glass , texturedBack panel WoodAbsorber Tinox, soldered

Manifold, 22 mmHarp-shaped absorber pipes10 pcs. @ Ø 8 mm

Insulation 50 mm rock woolConnections 3/4" outside thread, flat-sealingSealing EPDM rubber profile, UV-resistantDimensions Length: 2010 mm

Width: 1000 mmHeight: 113 mm

Gross surface area 2.01 m2

Absorber area 1.79 m2

Collector efficiency 76 %Collector volume 1.4 litreWeight 43 kgVerification Arsenal Research; No. 2.04.00110.1.0-1(2)

Article number Article ID PU77030001 IK 2000 / TIN H wood frame collector 1 pallet 12 pcs




Covering FrameA covering frame for tile or Eternit roofing, made of powder-coated sheetmetal; colour: charcoal; from roof inclinations of 30°.The covering frames include the items required to install roof covering.

The Basic Set includes: 1 unit of sheet metal cladding for two collectors 2 side closing profiles 1 cover strip 1 sensor tube extension 1 copy of Installation Instructions

The Basic Set on top of one another includes: 1 sheet metal cladding for 2 collectors

one above the other 2 side closing profiles 1 cover strip 1 copy of Installation Instructions

The Extension Set includes: 1 sheet metal cladding for one collector 1 cover strip

The Extension Set on top of one another includes: 1 of sheet metal cladding for one collector,

on top of one another 1 cover strip

Collector connectorsCorrugated-tube collector connectors:Flat-sealing screwed connection,incl. insulation, for connecting collectors

Collector Terminal ConnectorFor connecting the forward and return flow for a collector field

Corrugated tube connection set:flat-sealing, 3/4" connection, for connection in the attic space

Article number Description77030511 Covering Frame Basic Set, 4 m², tile77030521 Covering Frame Extended Set, 2 m², tile

77030516 Covering Frame Basic Set, 4 m², Eternit77030526 Covering Frame Extended Set, 2 m², Eternit

77030841 Covering Frame Basic Set, on top of one another, 4 m²

77030846 Covering Frame Extended Set, next to/on top of one another, 2 m²

Article number Description77032001 Corrugated tube collector connector for IK200077032002 A corrugated tube connection set for IK2000




Article number Description

TILE77030511 IK2000 G 4 Z 1 1 1 1 1 1 1 1 1 177030521 IK2000 E 2 Z 1 2 3 4 1 2 3 477030841 IK2000 GÜ 4 1 1 1 1 177030846 IK2000 EÜ 2 1 2 3 4

ETERNIT77030516 IK2000 G 4 E 1 1 1 1 1 1 1 1 1 177030526 IK2000 E 2 E 1 2 3 4 1 2 3 477030841 IK2000 GÜ 4 1 1 1 1 177030846 IK2000 EÜ 2 1 2 3 4

Planning Chart for Covering Frame Sets(roof inclination from 30°)

Planning Chart, Accessories(not included in price)

Select the suitable collector connectors and connection setson the previous page.

Col lectors per row 1 x 2 1 x 3 1 x 4 1 x 5 1 x 6 2 x 2 2 x 3 2 x 4 2 x 5 2 x 6

Designation

Collector connectors 1 2 3 4 5 2 4 6 8 10Connection set 2 2 2 2 2 4 4 4 4 4

Col lectors per row 1 x 2 1 x 3 1 x 4 1 x 5 1 x 6 2 x 2 2 x 3 2 x 4 2 x 5 2 x 6


Solar Stations S O L A R T E C H N I K

Solar Pump Stations without Control Systems

SINGLE-LINE/DOUBLE-LINE PUMPING UNITProduct descriptionThe GEO-TEC Single-Line DN 25 Solar Station is a single-linesolar pumping unit with all the equipment necessary for ope-ration. It installs in the return flow and is equipped with a WiloST 25/6 pump. The pump can be shut off by means of a ballvalve and a flowmeter that can be completely shut off, makingit possible to replace the pump without much involved.

The GEO-TEC Double-Line DN 25 solar station is a double-linesolar pump station for forward and return flow. All the fittingsnecessary for operation are integrated. The forward-flowline and the pump in the return-flow line can be completelyshut off.The unit is completely pre-assembled and inspected for leakage.

Fittings 2 gravity brakesFlow meterRinsing and filling systemSafety deviceWall bracketComplete insulation

Safety device Safety valve, 6 barPressure gauge 10 barConnection for expansion tank to 60 litres

Pump WILO ST 25/6 (6 m delivery head )130 mm installation length

Rated size DN 25Connections 1" euro-cone for compression fittingGravity brake Brass

Cracking pressure: 20 mbarWith FlowUno in the forward flow, customersmust be very sure to install SKB!

Flow meter Measuring range from 2-15 litresSuspended solid particles, serves as fast-actingpower brake for precise regulation of solarcollector systems

Fittings BrassSeals EPDM/TeflonInsulation EPP = 0.041 W/(m*K)Max. pressure 10 barMax. temperature 120°, for a brief period 160°CSingle-line Centre-to-centre distance: 100 mm

Width of insulation: 180 mmHeight of insulation: 375 mm

Double-line Centre-to-centre distance: 100 mmWidth of insulation: 250 mmHeight of insulation: 375 mm

Double-line Built-in AIR-STOP to degas the heat-transferSpecial features medium

Forward flow and return with ball valves

Article number Description14301002 Solar pumping unit, single-line DN 25 without control system14301001 Solar pumping unit, double-line DN 25 without control system



Compact Solar Pump Stations with Control System

COMPACT WITH CONTROL SYSTEMProduct description

Article number Description14301000 Compact solar pumping unit with SR1 single-circuit control module14205001 Compact solar pumping unit with SR2 double-circuit control module14206001 Compact solar pumping unit with SR3 multi-circuit control module

The GEO-TEC Compact Double-Line solar station includes a dou-ble-line solar pumping unit and the GEO-TEC controllers SR1,SR2 or SR3, as desired in each case.This station is a double-line solar pumping unit for forward andreturn flow. All the fittings necessary for operation are inte-

grated. The forward-flow line and the pump in the return-flowline can be completely shut off.Due to the pre-assembled control system, installing thestation does not involve much, because parts are alreadypre-wired.

Fittings 2 gravity brakesFlow meterRinsing and filling systemSafety deviceWall bracketComplete insulation

Safety device Safety valve, 6 barPressure gauge 10 barConnection for expansion tank to 60 litres

Pump WILO ST 25/6 (6 m delivery head )130 mm installation length

Rated size DN 25Connections 1" euro-cone for compression fittingGravity brake Brass

Integrated in thermal valvesCracking pressure: 200 mm water column

Flow meter Measuring range from 2-15 litresSuspended solid particles, serves as fast-actingpower brake for precise regulation of solarcollector systems

Fittings BrassSeals EPDM/TeflonInsulation EPP = 0 041 W/(m*K)Max. pressure 10 barMax. temperature 120°, for a brief period 160°CDimensions Centre-to-centre distance: 100 mm

Width of insulation: 250 mmHeight of insulation: 375 mm

Special features Automatic air bleeder permanently built inForward flow and return with ball valvesIncl. compression fitting for 22 diameter



Freshwater Unit

GEO-TEC Regumag X-30 Freshwater Unit

Product description

Article number Description14002705 Freshwater unit without circulation pump X-3014000025 Freshwater unit with circulation pump XZ-30

The GEO-TEC Freshwater Unit is an inline heater with high capacity and veryconvenient to operate for detached and semi-detached homes. Output andgreat operating convenience for detached and semi-detached homes.The GEO-TEC Fresh Water Unit reaches the standard capacity for a housingunit already with primary forward flow temperature of just 60° C and hasoptimum cooling.The GEO-TEC Freshwater Unit is especially well-suited for solar collectorsystems.

Model: Regumaq X Model: Regumaq XZ

Fittings High-grade steel plate heat exchangerPTC controller

Rated size DN 25Connections 1" outside thread, flat-sealing

1" euro-cone for compression fittingInsulation Insulation made of EPP

Colour: charcoalTube connections High-grade steel, compact and space-saving

designCalcification Calcification-proof to 35° C,

100° C buffer temperature and 50° Chot water tap temperature

Pressure stage PN 10Max. temperature 120° CCW static pressure 2.0 barWeight 30 kgConnections 1" outside thread, flat-sealingDimensions with Height: 860 mmcladding Width: 500 mm

Depth: 260 mmSafety valve Drinking water circuit at 10 bar

ControllerSto

rageu

nit

Storag

eunit

Controller

Heatexchan

ger

Heatexchan

ger



Solar Stratified Storage Unit

Article number Description .15000001 Stratified Storage Unit DUO 15 with control system15000002 Stratified Storage Unit DUO 25 with control system15000009 Stratified Storage Unit DUO 15 without control system15000120 Stratified Storage Unit DUO 25 without control system

The GEO-TEC Solar Stratified Storage Unit is for loading a buffer storageunit in optimum fashion in two levels.This compact and entirely preassembled system is completely insulated,has a generously dimensioned plate-type heat exchanger, is prewired witha preset controller, enabling simple and fast installation and reliableinitial start-up.

The GEO-TEC Solar Stratified Storage Unit is equipped with a flowmeter asstandard. The control system is incorporated in the insulation in a visuallyappealing fashion.The entire station has a very sturdy design. Turbulent flow-through of theplate-type heat exchanger provides for a good self-cleaning effect.

GEO-TEC Solar Stratified Storage Unit Regusol X-DUO 15/25

Product description

VFS: Flow rate und temperature sensorK1: Collector fieldP1: Connection of pump to solar circuitP2: Connection of pump to load circuitSP1: Storage tankT1: Collector temperatureT2: Heat exchanger inlet from collector

T3: Heat exchanger inlet to the storage unitT4: Lower storage unit temperatureT5: Middle storage unit temperatureT6: Top storage unit temperatureV1: Changeover valve for stratified loadingHX: Heat exchanger

Fittings 2 gravity brakesElectronic three-way valveRinsing and filling systemSafety deviceWall bracketComplete insulation

Safety device Safety valve, 6 bar, primary / 3 bar secondaryPressure gauge

Pump UPS 15-60/130 (primary)UPS 15-60/130 (secondary)

Connections Primary: 1" euro-cone for compression fittingSecondary: 1" flat-sealing, outside thread

Insulation EPP = 0.041 W/(m*K)Max. pressure Primary: to PN 6

Secondary: to PN 10Max. temperature Primary: continuous operation 120°

Secondary: continuous operation 110°Start-up temperatures to 160°C

Dimensions Total width: 560 mmTotal height: 860 mm

SSLE 30 To a max. of 30 m² of collector areaFlow rate, primary: 6 l/minFlow rate, secondary: 5.4 l/min

SSLE 50 To a max. of 50 m² of collector areaFlow rate, primary: 10 l/minFlow rate, secondary: 9 l/min

Regum

aq,prim

arycirc

uit

Regum

aq,sec

ondary

circuit

Pressure

loss

Pressure

flow


Accessories S O L A R T E C H N I K

Accessories

Quick air-bleeder for solar systems R3/8" 10 bar 160°C With ball shut-off valve

High-Performance Air-Bleeder for solar systems R 1/2" 10 bar 180°C This automatic Quick Air-Bleeder is especially designed for

operation at high temperatures and glycol liquid in solarcollector systems.

Three-way valve, motor-controlled This is for changing over with storage unit loading

(bottom/top, buffer/boiler) Connection: 3 x 1" outside thread Supply: 230V/50 Hz

Utility Water Mixer For optimum premixing of the utility water temperature Protects against scalding by controlled maximum temperatures Connections: 1" outside thread Setting range: 30° C - 70° C

Article number Description15000004 Quick air bleeder for solar systems R 3/8"15000014 R ½" High-performance Air-Bleeder for solar systems15000005 Three-way valve, motor-controlled15001000 Utility Water Mixer14100018 Compression clamp 18 mm (1 set = 4 pcs)14100022 Compression clamp 22 mm (1 set = 4 pcs)



Flushing and Filling Station

Filling and Flushing Station for solar collector systems A compact flushing and filling station A powerful centrifugal pump provides for rapid and clean filling

of collector systems Built-in fine filter with sight glass Temperature-resistant hose to 60° C Handy hose rack Shut-off valve on canister drain Mounted on a sturdy, lightweight portable dolly A fine filter before the pump makes it not only possible to filter

residue from soldering and welding out of the collector system,but also to detect air bubbles in the line in good time.

The canister is easy to remove for cleaning and has a large-size,lockable filling opening. On-site mixing in a clean container ispossible when there is no ready-made medium available.

TECHNICAL SPECS ON PUMP:Pump Self-priming centrifugal pump

Max. dry running: 1 min.Incl. hoses for suction, pressure and flushingIncl. screwed connections

Pump shaft Stainless steelCasing Grey cast ironMax. delivery rate 24.2 l/minMax. pressure 5.9 barMotor 230 V, 1.7-m cable with plugRPM 2850 min/-1Temperature max. 60°C sustained loadingSpecial features Built-in fine filter with sight glass

Drains on the delivery side

TECHNICAL SPECS ON DOLLY:Material Welded, sturdy, shaped frameDimensions Without hoses: 102x46x55 cmCanister volume 30 litreCanister UV-stable PE canister

Wide opening for filling with screw capShut-off valve on drain

Article number Description14000010 Flushing and filling station



Service Case for Fitters

A PVC case with all the parts necessary to servicecollector systems

Content:

Handheld refractometer Digital multimeter Pressure gauge Screwdriver with voltage detector pH-value checker Compass Inspection stickers and note stickers (12 of each)

Description:The handheld refractometer determines the frost-resistance ofwater/propylene-glycol, water/ethylene-glycol mixtures and thedensity of water battery acid mixtures. The measuring range is 0°-50°Cfor glycols.The digital multimeter can be used to measure: direct current,alternating current, direct voltage, alternating voltage, resistance,temperature, positive diode voltage drop and hFE parameters fortransistors and continuity.A pressure gauge is for determining the inlet pressure on the expansiontank. The measuring range is between 0-6 bar.The phase tester can be used to quickly check whether there is pertinentvoltage contacting the control system or its relevant components.The pH-value test strips allow simple determining the pH-value of thesolar liquid.The compass can be used to check the exact alignment.

The inspection stickers and note stickers remindthe customer of when the next servicing of itscollector system is due.Only regularly serviced collector systems canfunction in an optimum and satisfactory fashionfor years.Warranty claims required that the collectorsystem have been serviced.

Anti-freeze Protection Analysis Instrument in PVC CaseWith one or two drops of test liquid, the handheld refractometer determines thefrost resistance of water/propylene-glycol, water/ethylene glycol mixtures andthe density of water battery acid mixtures.

Range of use for measurements of: Propylene glycol (solar, heating & cooling systems) 0° - 50° C Ethylene glycol (solar, heating & cooling systems) 0° - 50° C Battery acid (car battery) 1.15-1.30 g/chmA Windscreen water 0 to -40°C

Complete set consists of: 1 handheld refractometer, 1 screwdriver for adjusting the 0-line 1 pipette for sampling heat transfer medium, 1 cleaning cloth, 1 PVC box,

foam-lined

Article number Description11000800 Test-kit case for collector systems11000400 Handheld Refractometer/Anti-freeze Protection Analysis Instrument



Expansion Tanks

Expansion tanks for solar collector systems In accordance with DIN 4757 Inlet pressure 2.5 bar

Article number Litres Design max. bar Dimension Connection15000018 18 l Suspended 6 bar 290 400 3/4”15000025 25 l Suspended 6 bar 290 500 3/4”15000040 40 l Suspended 6 bar 320 560 3/4”

Article number14000004 Connection set for expansion tank, 18-40 litres

60-80 litres Standing High-grade steel Replaceable nitrile membranes

Article number Litres Design max. bar Dimension Connection15000060 60 l Standing 6 bar 380 730 3/4”15000080 80 l Standing 6 bar 450 735 3/4”

18-40 litres Suspended Galvanised steel flange Fixed nitrile membranes

GEO-TEC Connection SetOptional for GEO-TEC FlowDuo and FlowUno solar pump stations, for expansion tank onsolar stations 3/4", for connection to the Safety Set, armoured safety house 500 mm,wall bracket 210 mm x 250, rapid-action coupling and installation materials.

Article number15005302 Service coupler for 60-80 litre expansion tank

Service Coupler Service coupler especially for solar expansion tanks 3/4" for 60- and 80-litre expansion tanks



Expansion Tanks

Article number Litres PROCEDURE max. bar Dimension Connection15200060 60 l Standing 6 bar 380 550 1”15200080 80 l Standing 6 bar 450 735 1”15200100 100 l Standing 6 bar 450 790 1”15200150 150 l Standing 6 bar 550 800 1½”15200200 200 l Standing 6 bar 550 1080 1½”15200250 250 l Standing 6 bar 630 984 1½”15200300 300 l Standing 6 bar 630 1177 1½”15200400 400 l Standing 6 bar 630 1540 1½”15200500 500 l Standing 6 bar 780 1540 1½”

Expansion Tanks for Heating Systems

With standing design Replaceable nitrile membranes High-grade steel Inlet pressure 1.5 bar

100-300 litres Standing High-grade steel Replaceable nitrile membranes

Article number Litres PROCEDURE max. bar Dimension Connection15000100 100 l Standing 6 bar 450 790 1”15000200 200 l Standing 6 bar 550 1080 1½”15000300 300 l Standing 6 bar 630 1177 1½”



Heat Transfer Medium

Propylene glycol

Specifications: Colour: colourless Vapour pressure at 20° C: 23 mbar Density (20° C) 104 - 106 g/cm3 No irritant effect

Characteristics:

An odourless, hygroscopic liquid Based on 1.2-propylene glycol Food-safe Protects through special inhibitors against corrosion, aging and encrustation Completely mixable with water No nitrite, phosphate or amine Mixes with all common commercially available antifreeze agents based on 1.2-propylene glycol Biologically degradable

Application:

No sustained temperatures over 170 C as this would result in aging of the antifreeze medium. Do not use with heat exchangers galvanised on the primary side.

Storage:

Only store in the original container. Three-year shelf life

Disposal:

In accordance with ÖNORM S 2100

Waste key number:

55370

Article number Description Container15100030 Heat transfer concentrate of propylene glycol 10 kg

15100040 Heat transfer mixture of propylene glycol 10 kg15100050 Heat transfer mixture of propylene glycol 25 kg


Solar Control Modules S O L A R T E C H N I K

System Control Modules

Pico System Controller

A simple controller, the Pico impresses people with simpleadjustment.

With the Pico, you're guaranteed an easy overview oftemperature readings and the system's operating modes.

This control module has a small LCD display via which youset the maximum temperature and temperature difference.

Two trimmers for adjusting maximum temperature andtemperature difference (PICO Standard).

With the design with an LED and LCD, the exact adjustmentcan be made from the outside with one button.

Article number Description17000010 GEO-TEC Pico Standard17000008 GEO-TEC Pico Info17000009 GEO-TEC Pico Comfort

Design PICO Standard PICO Info PICO ComfortSolar scheme (1 collector, 1 storage unit) X X XDifference controller scheme (reloading function) x x XReturn flow temperature booster scheme X X DIP switchHeating DIP switch scheme X XCooling DIP switch scheme X XFrost protection function can be connected Jumper Jumper DIP switchSpeed control can be connected - - DIP switchSystem safeguard X X XCirculation monitoring system, dT-criterion X X XSensor monitoring, interruption/short circuit X X XQuantity of outputs 230 Volts 1 1 1Quantity of sensor inputs 2 2 2LED display (red-green) 2 2 2LCD display 11Parameter setting Two trimmers Button + display Button + displayDimensions W = 75 mm, H = 93 mm, T = D0 mmWeight approx 150 gProtective system IP41Circuitry output 1 x 230V/AC - 1A 1 x 230V/AC – 1A

Speed-controlledTemperature inputs 2 x for PT1000Temperature for use 0°C to –50°C



Single/Double-Circuit Control Modules

Temperature Difference Controller SR I/ SR II

This generation of controllers is designed to optimise the outputof thermal collector systems.The model SR I is for controlling collector systems with a maximumof one collector field and one storage unit.Model SR II can control one collector with one storage unit, onecollector field with two storage units or two collector fields withone storage unit.

Functions

Monitoring of the sensors and circulation The outlet for the pump (speed-controlled, of course) can be

set manually for installation or service work. For the safety of the system components, a function has been

allowed for to provide a system safeguard, a protectivesafeguard for the collectors and recooling.

Article number17000001 GEO-TEC Single-Circuit Control Module17000002 GEO-TEC Double-Circuit Control Module

Display Large LCD displayPictograms

Items included Control systemOperating instructionsInstructions for getting startedFuseNO sensors or cables!

Casing Flips open and locks in positionThe top piece is removable.

Cables Plug-in flat-cable connectionsInstallation By bracketsOperation By four-button panelStandard functions of the SR 1 System safeguarding function

Collector safeguarding functionManual OperationRecooling functionSpeed control

Standard functions of the SR 2 System safeguarding functionCollector safeguarding functionManual OperationRecooling functionSpeed controlMetering of energy producedAntifreeze functionPipe-collector function2 temperature difference controllersReheating / thermostat function



System Control Modules

System Controller SR III

The SR III system controller impresses people with simple operation in spite of va-ried control possibilities. Schemes can be selected and additional multifunctioncontrollers freely assigned.With the SR III, up to three energy output terminals and two energy generators(collector fields) can be controlled in optimum fashion.This control system also has a data interface via which a data stick can be used toinstall various special purpose programmes on the controller.The controller has ten inputs for PT PT1000, three of which are optionally for digitalinput or radiation sensors, six 230V/ AC outputs, all with speed control.

Artikelnummer Beschreibung17000003 GEO-TEC Mehrkreisregelung

Display Large LCD displaySelectable language

Items included Control systemOperating instructionsInstructions for getting startedFuseNO sensors or cables!

Casing Flips open and locks in positionThe top piece is removable

Cables Plug-in flat-cable connectionsInstallation By bracketsOperation By four-button panelStandard functions Manual operation

Pipe-collector functionCollector safeguarding functionRecooling functionSystem safeguarding functionAntifreeze functionCirculationAlarmTimerThermostat functionThreshold switchReturn flow temperature boosterWood-powered boiler functionTemperature difference controllerRadiation sensor functionPump safeguarding functionData loggingMultifunction controllerMetering of energy producedAnti-legionella function

Heating circuit function Triggering of mixer & pumpAdjustment to forward flow temperatureor room temperatureTriggering of hot water supply



Accessories

Temperature sensor

Storage unit sensor: PVC 6x25 mm or 8x25 mm with 2,5 m PVC-coated cableCan be used up to +105° C, taking the installation instructions into account.

Collector sensor: PT PT1000 6x25 mm or 8x25 mm with 2.5 m silicon cable and teflonised strandsCan be used up to +250° C, taking the installation instructions into account.

IMMERSION SLEEVE made of brass112 mm long, R ½", temperature range -40° C to +200° CLength immersion sleeve: 94 mm; diameter: 6 mm; material: CuZn39Pb3.

Sensor connection socketSensor connection socket with built-in voltage surge protectionFilters out a certain part of atmospheric excess voltage.The collector sensor can be extended simply and safely.Includes brackets for simple wall mountingCasing: Plastic, grey, protective system IP 65Measurements: 80 mm x 80 mm x 50 mmTemperature range: -25°C to +70°C

Article number Description17000200 Storage unit sensor 6 mm17000400 Storage unit sensor 8 mm17000100 Collector sensor 6 mm17000600 Radiation sensor17000300 Brass immersion sleeve: 112 mm17000005 Sensor connection socket

Article number Description17000500 Output metering module to 1.5 m3/h17000006 DATA STICK for SR III17000007 PC-USB interface

Output Metering ModuleCan only be used in combination with an SR II/SR III!! Horizontal or vertical installation Operating pressure: to 16 bar as per DIN 2401; hot water to 90° C Up to a Qn of 1.5 m3/h Contact loading: 24V (without dropping resistor) The contact maker is equipped with a 100 Ω 1/4 W protective resistor for volumetric

flowmeters, 0.2 A (protective low voltage) State-of-the-art single-jet rotary vane meter with fully dry running meter and magnetic

coupling To rule out interference by impure water, only the impeller wheel operates in the wet area. The counter turns for easy reading. A shielding cap that can be sealed with lead protects against magnetic influences


Storage Units, Buffers & Accessories S O L A R T E C H N I K

Solar Storage Unit SSH-PU

* Insulation not removable!** To achieve the rated output figure cited, the boiler output has to be greater than the

continuous operation specified.*** Only with water in the liquid state as the operating medium for the heat exchangers

Article number Description13100200 Solar Storage Unit 200 l with PU insul.13100300 Solar Storage Unit 300 l with PU insul.13100400 Solar Storage Unit 400 l with PU insul.13100500 Solar Storage Unit 500 l with PU insul.

Storage unit model SSH-PU 200 SSH-PU 300 SSH-PU 400 SSH-PU 500Volume [litres] 200 300 400 500Diameter without insulation [mm] 500* 500* 600* 650*Diameter with insulation [mm] 600 600 700 750Insulation [mm] 50* 50* 50* 50* 50*Height with insulation [mm] 1232 1697 1660 1783Tilting height [mm] 1370 1800 1800 1970Heating surface, top/bottom [m2] 0,6 / 0,8 0,8 / 1,2 1,0 / 1,5 1,2 / 1,8Water volume, HX, top/bottom [litres] 3,8 / 5,0 5,0 / 7,5 6,3 / 9,4 7,5 / 11,3Volume flow, HX, top/bottom [m³/h] 0,7 /1,2 1,0 / 1,6 1,2 / 2,0 1,4 / 2,4Water volume, HX, top/bottom [mbar] 30 / 70 35 / 90 45 / 120 55 / 250Rated output figure** top/bottom as per DIN 4708 1,23 / 3,6 1,8 / 8 2,1 / 11 2,5 / 14Continuous operation, top/bottomAs per DIN 4708 (10/80/45) °C [l/h] 410 / 710 605 / 970 720 / 1180 830 / 1400max. T/max. PTW [°C / bar] 95 / 10 95 / 10 95 / 10 95 / 10max. T/max. P Heating*** [°C / bar] 160 / 25 160 / 25 160 / 25 160 / 25Cold/hot water, outside thread, (CW/HW) [inches] G 1 G 1 G 1 G 1Circulation, outside thread (circ.) [inches] G ¾ G ¾ G ¾ G ¾Heat exchangers, all outside thread (FF/RF) [inches] G ¾ G ¾ G ¾ G ¾Electric heating, inside thread (E-heating) [inches] G 1½ G 1½ G 1½ G 1½Nominal diameter of inspection flange (RFL) DN 110 DN 110 DN 110 DN 110Sensor/controller connections (F1, F2) Sensor sleeve, internal diameter 9 mmThermometer connection M8 Thermometer option

Dimensions SSH-PU 200 SSH-PU 300 SSH-PU 400 SSH-PU 500CW [mm] 110 110 127 128RF1 [mm] 180 180 205 205FF1 [mm] 630 580 635 685RF2 [mm] 780 945 965 1020Z [mm] 880 1045 1065 1125FF2 [mm] 990 1215 1261 1325HW [mm] topEl. heating [mm] 705 770 770 920Weight [kg] 85 114 166 215

Product description:

An standing storage unit made of S235JRG steel with two large-surface bare-tube heat exchangers Inside: enamelling in accordance with Part 3 of DIN 4753; outside: primer-coated 1 1/4" protective magnesium anode to complete the cathodic corrosion protection as per Part 6

of DIN 4753 Sensor tube included Comes with thermometer (separate package) A 1 1/2" sleeve is provided as standard for retrofitting an electric heating system. Inspection opening 180 x 110 x hole diam. 150 All outside thread, flat-sealing CFC-free 50-mm PU rigid-foam insulation with casing made of lined, coloured plastic in

accordance with Part 8 of DIN 4753, RAL colour silver 9006 Pressure resistance 10 bar



Solar Storage Unit SSH-WS

Dimensions SSH-WS 750 SSH-WS 1000CW [mm] 157 180RF1 [mm] 280 320FF1 [mm] 967 947RF2 [mm] 1127 1097Z [mm] 1227 1197FF2 [mm] 1567 1482HW [mm] 1855 1760El. heating [mm] 1032 1012Weight [kg] 344* 400*

Article number Description13100750 Solar Storage Unit 750 l with flexible foam insul.13101000 Solar Storage Unit 1000 l with flexible foam insul.

Storage unit model SSH-WS 750 SSH-WS 1000Table of Contents [litres] 750 1000Diameter without insulation [mm] 750 900Diameter with insulation [mm] 950 1100Insulation [mm] 100 100Height with insulation [mm] 2082 2010Tilting height [mm] 2050 2020Heating surface, top/bottom [m2] 1,9 / 2,7 1,9 / 2,9Water volume, HX, top/bottom [litres] 16,0 / 22,8 16,0 / 24,5Volume flow, HX, top/bottom [m³/h] 2,1 / 4,2 2,1 / 4,6Pressure loss, HX, top/bottom [mbar] 40 / 180 40 / 200Rated output figure** top/bottom as per DIN 4708 13 / 35 13 / 41Continuous operation, top/bottom as per DIN 4708 (10/80/45) °C [l/h] 1220 / 2470 1220 / 2690max. T/max. P TW [°C/bar] 95 / 10 95 /10max. T/max. P heating*** [°C/bar] 160 / 25 160 / 25Cold/hot water, outside thread, (CW/HW) [inches] G 1½ G 1½Circulation, outside thread (circ.) [inches] G ¾ G ¾Heat exchangers, all outside thread (FF/RF) [inches] G 1¼ G 1¼Electric heating, inside thread (el. heating) [inches] G 1½ G 1½Nominal diameter of inspection flange (RFL) DN 200 DN 200Sensor/controller connections Sensor terminal stripThermometer connection M8 Thermometer option

* Weight without insulation** To achieve the rated output figure cited, the boiler output has to be greater than

the continuous operation specified.*** Only with water in the liquid state as the operating medium for the heat exchangers


An standing storage unit made of S235JRG steel with two large-surface bare-tube heat exchangers Inside: enamelling in accordance with Part 3 of DIN 4753; outside: primer-coated 114" protective magnesium anode to complete the cathodic corrosion protection Optional with external current anode in accordance with Part 6 of DIN 4753 Temperature sensor, variably positionable by means of sensor terminal strip Comes with thermometer (separate package) A 1 1/2" sleeve is provided as standard for retrofitting an electric heating system. Inspection opening All outside thread, flat-sealing CFC-free 80-mm PU flexible foam insulation with PVC top coat, incl. floor insulation

(100 mm thick) in accordance with Part 8 of DIN 4753, RAL colour silver 9006 Pressure resistance 10 bar



High-grade Steel Storage Unit – Solar HSS

* Um die angegebene NL–Zahl zu erreichen muss die Kesselleistung größer sein als die angegebene Dauerleistung.


For use for district heating, solar boilers, heating boilers and condensingappliance technology; with internally positioned bare-tube heat exchanger

Corrosion-resistant in use with drinking waterWith sensor terminal strip for all common sensors

Made in accordance with DIN 4753; flexible foam insulation 100 mm RAL 9006 Operating pressures allowed: drinking water = 10 bar/heating water = 25 bar;

Permissible operating temperature: drinking water = 95° C/heating water = 110°C Made of 1.4571 high-grade steel

Storage unit model HSS 200 HSS 300 HSS 400 HSS 500 HSS 750 HSS 1000Volume [litres] 200 300 400 500 750 1000Diameter without insulation [mm] 500 500 600 600 750 850Diameter with insulation [mm] 700 700 800 800 950 1050Insulation [mm] 100 100 100 100 100 100Height with insulation [mm] 1410 1660 1690 1960 2040 2120Tilting height [mm] 1380 1625 1670 1920 2015 2070Heating surface, top/bottom [m2] 0,9/0,9 0,9/1,4 0,9/1,8 0,9/1,8 1,4/2,4 1,6/2,8Water volume, HX, top/bottom [litres] 3,0/3,0 4,7/7,3 6,2/12,5 6,2/12,5 9,7/16,6 11,1/19,5Volume flow, HX, top/bottom [m³/h] 0,8/1,65 1,3/2,58 1,4/2,95 1,6/3,26 2,06/4,01 2,3/4,8Pressure loss, HX, top/bottom [mbar] 160/580 40/190 15/90 15/105 35/200 50/320Rated output figure* top/bottom as per DIN 4708 2/4 3/12 3/20 4/23 10/35 14/46Continuous operation, top/bottomAs per DIN 4708 (10/80/45) °C [l/h] 476/978 784/1522 820/1743 943/1924 1215/2413 1348/2846max. T/max. P TW [°C/bar] 95/10 95/10 95/10 95/10 95/10 95/10max. T/max. P heating [°C/bar] 110/25 110/25 110/25 110/25 110/25 110/25Cold/hot water, (CW/WW) [inches] Rp 1 Rp 1 Rp 1 Rp 1 Rp 1½ Rp 1½Circulation (circ.) [inches] Rp ¾ Rp ¾ Rp ¾ Rp ¾ Rp ¾ Rp ¾Heat exchangers, outside thread (FF/RF) [inches] G 1 G 1¼ G 1½ G 1½ G 1½ G 1½Electric heating Possible via inspection flangeNominal diameter of inspection flange (RFL) DN 110Sensor/controller connections Sensor terminal stripThermometer connection [inches] Rp ½

Dimensions HSS 200 HSS 300 HSS 400 HSS 500 HSS 750 HSS 1000CW [mm] 65 65 70 70 80 80RF1 [mm] 305 305 330 330 380 395FF1 [mm] 605 795 890 890 940 995RF2 [mm] 685 870 975 975 1025 1185Z [mm] 765 945 1055 1110 1115 1090FF2 [mm] 1065 1260 1325 1380 1430 1585HW [mm] 1145 1375 1420 1670 1720 1710Weight [kg] 75 100 115 120 185 210

Article number Description13200200 High-grade Steel Storage Unit 200 l, 50 mm, PU insul.13200300 High-grade Steel Storage Unit 300 l, 50 mm, PU insul.13200400 High-grade Steel Storage Unit 400 l, 50 mm, PU insul.13200500 High-grade Steel Storage Unit 500 l, 50 mm, PU insul.13200750 High-grade Steel Storage Unit 750 l, 100 mm, PU insul.13201000 High-grade Steel Storage Unit 1000 l, 100 mm, PU insul.



Brauchwasserspeicher BWS

Dimensions BWS 200 BWS 300 BWS 400 BWS 500CW [mm] 110 110 127 128RF [mm] 180 180 205 205FF [mm] 630 580 635 685Z [mm] 780 1045 1065 1125HW [mm] oben oben oben obenEl. heating [mm] 800 770 770 920Weight [kg] 73 94 151 195

Article no. Description13210200 Utility Water Storage Unit 200 l with PU insulation

13210300 Utility Water Storage Unit 300 l with PU insulation




Standard storage unit made of S235JR steel with a large-surface bare-tube heatexchanger

Inside: enamelling in accordance with Part 3 of DIN 4753; outside: primer-coated Protective magnesium anode 1 ¼" to complete the cathodic corrosion

protection in accordance with Part 6 of DIN 4753 Sensor tube included Comes with thermometer (separate package) NEW: A 1 ½" sleeve is provided as standard for retrofitting an electric

heating system for all sizes Inspection opening 180 x 110 x hole diam. 150 All outside thread, flat-sealing CFC-free 50-mm PU rigid-foam insulation with casing made of lined, coloured

plastic in accordance with Part 8 of DIN 4753, RAL colour silver 9006 Pressure resistance 10 bar

Storage unit model BWS 200 BWS 300 BWS 400 BWS 500Volume [litres] 200 300 400 500Diameter without insulation [mm] 500* 500* 600* 650*Diameter with insulation [mm] 600 600 700 750Insulation [mm] [mm] 50* 50* 50* 50*Height with insulation [mm] 1232 1697 1660 1783Tilting height [mm] 1370 1800 1750 1970Heating surface, top/bottom [m2] 0,9 1,2 1,5 1,8Water volume, HX, top/bottom [Liter] 5,7 7,5 9,4 11,3Volume flow, HX, top/bottom [m³/h] 1,2 1,6 2,0 2,4Pressure loss, HX, top/bottom [mbar] 70 60 120 250Rated output figure** top/bottom as per DIN 4708 3,6 8 11 14Continuous operation, top/bottomAs per DIN 4708 (10/80/45) °C [l/h] 710 970 1180 1400max. T/max. PTW [°C / bar] 95 / 10 95 / 10 95 / 10 95 / 10max. T/max. P Heating*** [°C / bar] [°C / bar] 160 / 25 160 / 25 160 / 25 160 / 25Cold/hot water, outside thread, (CW/HW) [inches] G 1 G 1 G 1 G 1Circulation, outside thread (circ.) [inches] G ¾ G ¾ G ¾ G ¾Heat exchangers, all outside thread (FF/RF) [inches] G ¾ G ¾ G ¾ G ¾Electric heating, inside thread (E-heating) [inches] G 1½ G 1½ G 1½ G 1½Nominal diameter of inspection flange (RFL) DN 110 DN 110 DN 110 DN 110Sensor/controller connections (F1, F2) Sensor sleeve, internal diameter 9 mmThermometer connection M8 Thermometer option

* Insulation not removable!** To achieve the rated output figure cited, the boiler output has to be greater than the continuous operation specified.

*** Only with water in the liquid state as the operating medium for the heat exchangers



High-performance Storage Unit HLS


An standing storage unit made of S235JR steel with a large-surfacebare-tube heat exchanger

Inside: enamelling in accordance with Part 3 of DIN 4753; outside:primer-coated

1 ¼" protective magnesium anode to complete the cathodic corrosionprotection

Temperature sensor, variably positionable by means of sensor terminal strip Inspection opening 180 x 110 x hole diam. 150 All outside thread, flat-sealing CFC-free, 80-mm PU flexible-foam insulation with PVC top coat incl. floor

insulation in accordance with Part 8 of DIN 4753, RAL colour silver 9006 Pressure resistance 10 bar

* To achieve the rated output figure cited, the boiler output has to be greater than the continuous operation specified.** Only with water in the liquid state as the operating medium for the heat exchangers

Speicher Typ HLS 300 HLS 400 HLS 500Volume [litres] 300 400 500Diameter without insulation [mm] 550 600 650Diameter with insulation [mm] 710 760 810Insulation [mm] 80 80 80Height with insulation [mm] 1560 1790 1756Tilting height [mm] 1550 1780 1760Heating surface, top/bottom [m2] 3,2 4,2 4,6Water volume, HX, top/bottom [Liter] 20,1 26,4 28,9Volume flow, HX, top/bottom [m³/h] 3,6 3,8 4,0Pressure loss, HX, top/bottom [mbar] 410 590 720Rated output figure* top/bottom as per DIN 4708 19 27 35As per DIN 4708 (10/80/45) °C [l/h] 2100 2250 2400max. T/max. P TW [°C / bar] 95 / 10 95 / 10 95 / 10max. T / max. P HZG** [°C / bar] 160 / 25 160 / 25 160 / 25max. T/max. P heating [inches] G 1 G 1 G 1Circulation (Z) [inches] G ¾ IG G ¾ IG G ¾ IGHeat exchangers (FF/RF) [inches] Rp 1 IG Rp 1 IG Rp 1 IGElectric heating Possible via inspection flangeNominal diameter of inspection flange (RFL) DN 110Sensor/controller connections Sensor terminal stripThermometer connection M8 Thermometer option

Dimensions HLS 300 HLS 400 HLS 500CW [mm] 115 129 130RF [mm] 210 210 225FF [mm] 1270 1530 1470Z [mm] 1000 906 1200HW [mm] 1393 1611 1571Weight [kg] 170 208 235

Artikelnr. Beschreibung13510200 High-performance Storage Unit 200 l, 50 mm

13510300 High-performance Storage Unit 300 l, 50 mm



Storage Tanks, Buffers and Accessories



Buffer Storage Unit without PSD set of tubing

* Weight without insulation


Standing storage unit made of S235JR steel Inside untreated, outside with primer coat Temperature sensor, variably positionable by means of sensor

terminal strip Optional flange 280 x 200 x hole diameter 245 for inspection

or upgradingWith finned pipe heat exchanger (PSX-F) - for extra charge,see accessories

CFC-free, 80-mm PU flexible-foam insulation with PVC top coatincl. floor insulation in accordance with Part 8 of DIN 4753,from 800 litres with 100-mm thickness, RAL colour silver 800

Pressure resistance 3 bar

Storage Unit Model PSX / PSX-F 500 800 1000 1500 2000 3000Volume [litres] 500 800 1000 1500 2000 3000Diameter without insulation [mm] 650 790 790 1000 1100 1150Diameter with insulation [mm] 810 990 990 1200 1300 1350Insulation [mm] 50 100 100 100 100 100Height with insulation [mm] 1700 1802 2202 2130 2410 3160Tilting height [mm] 1710 1780 2180 2150 2450 3170max. T / max. P heating [°C / bar] 95 / 3Loading/unloading connections (A1-A4) [inches] Rp 1½Electric heating: only PSX-F Sensor terminal stripNominal diameter of inspection flange (RFL): only PSX-F DN 200Sensor/controller connections Sensor terminal stripThermometer connection M8 Thermometer optionAir bleed [inches] Rp 1¼

Dimensions 500 800 1000 1500 2000 3000A1 [mm] 245 246 246 320 365 375RFL [mm] 350 351 351 425 470 480A2 [mm] 645 646 786 786 905 1475A3 [mm] 1045 1046 1326 1253 1445 2265A4 [mm] 1405 1446 1866 1720 1985 3055Weight [kg] 95 143* 150* 211* 270* 348*

Article number Description13400500 Buffer Storage Unit, 500 l with insulation13400800 Buffer Storage Unit, 800 l with insulation13401000 Buffer Storage Unit, 1000 l with insulation13401500 Buffer Storage Unit, 1500 l with insulation13402000 Buffer Storage Unit, 2000 l with insulation13403000 Buffer Storage Unit, 3000 l with insulation


Storage Tanks, Buffers and Accessories S O L A R T E C H N I K

Combination/Buffer Storage Unit KSW-D


The Combination/Buffer Storage Unit is equipped with an integrated high-grade steel tube heat exchangerwithout circulation****

It is used chiefly in solar collector systems and heating systems. A buffer storage unit made of high-quality steel S235JR; inside: untreated; outside: primer-coated Pressure resistance of buffer storage unit: 3 bar Two large-surface bare-tube heat exchangers CFC-free flexible foam insulation with PVC top coat, RAL colour silver 9006 Temperature sensor, variably positionable by means of sensor terminal strip From 800 l, 1 ½" sleeve shifted by 30° for optional el. heating (RCN 65 - 4 kW ) at height of connection piece A5 All outside thread, flat-sealing

* To achieve the rated output figure cited, the boiler output has to** Standby volume between connections A5 und A6; continuous operation operation***Standby volume between connections A1 und A6; continuous operation

**** With KSW circulation is possible via T-piece in the CW inlet.

Combination/Buffer Storage Unit KSW 450 650 800 900 1050 1300Volume of Buffer Storage Unit [litres] 450 650 800 900 1050 1300Diameter without insulation [mm] 600 700 790 790 900 900Diameter with insulation [mm] 800 900 990 990 1100 1100Insulation [mm] 100Height [mm] 1960 1970 2020 2190 2000 2430Tilting height [mm] 2000 2005 2060 2230 2050 2470Heating surface, HX corrugated tube KSW [m2] 5Water volume, HX corrugated tube KSW [litres] 27Rated output figure* as per DIN 4708 KSW 1,7 2,2 2,5 2,9 3,4 3,610-min. peak tapping quantity KSWWith temperature of standby volume temp.** 52° C [litres] 105 125 154 160 175 20010-min. peak tapping quantity KSWWith temperature of standby volume temp.** 65° C [litres] 145 170 210 230 270 34010-min. peak tapping quantity KSWWith storage unit temp.*** 65° C [litres] 182 250 324 364 390 420max. T / max. P HW heating [°C / bar] 110 / 16max. T / max. P Buffer Storage Unit [°C / bar] 95 / 3max. ∆ p storage unit/hot water corrugated tube [bar] 6Cold/hot water, outside thread [inches] G ¾ G ¾ G ¾ G ¾ G ¾ G ¾Heat exchanger (FF/RF) all outside thread [inches] G 1 G 1 G 1 G 1 G 1 G 1Loading/unloading connections (A2-A5) outside thread [inches] G 1 G 1 G 1 G 1 G 1 G 1Loading/unloading connections (A1+A6) outside thread [inches] G 1¼ G 1¼ G 1¼ G 1¼ G 1¼ G 1¼Electric heating (E-HTG) inside thread [inches] – – Rp 1½ Rp 1½ Rp 1½ Rp 1½Sensor/controller connection Sensor terminal strip



Combination/Buffer Storage Unit KSW-D

Combination/Buffer Storage Unit KSW 450 650 800 900 1050 1300DimensionsA1 [mm] 105 110 125 125 110 110RL1 (only Models 1 & 2) [mm] 195 200 225 225 210 210A2 [mm] 495 500 540 570 525 600VL1 (only Models 1 & 2) [mm] 595 600 645 685 630 730RL2 (only Model 2) [mm] 695 700 745 785 730 830A3 [mm] 795 800 850 900 835 960A4 [mm] 995 1000 1060 1130 1045 1220VL2 (only Model 2) [mm] 1095 1100 1165 1245 1150 1350A5 [mm] 1195 1200 1265 1360 1250 1470ELECTRIC HEATING [mm] – – 1265 1360 1250 1470A6 [mm] 1715 1720 1745 1930 1730 2150Weight, KSW [kg] 193 218 268 283 316 348

Article number Description13510450 Combination Storage Unit, 450 l with utility water heat exchanger13510650 Combination Storage Unit, 650 l with utility water heat exchanger13510800 Combination Storage Unit, 800 l with utility water heat exchanger13510900 Combination Storage Unit, 900 l with utility water heat exchanger13511050 Combination Storage Unit, 1050 l with utility water heat exchanger13511300 Combination Storage Unit, 1300 l with utility water heat exchanger



Combination/Buffer Storage Unit KSE-D


This storage unit with an integrated utility water storage unit can be used as a combination storage unit. An integrated utility water storage unit 200 litres in volume is with enamelling in accordance with Part 3 of DIN 4753,

with Mg protective anode. It is used chiefly in solar collector systems and heating systems. A buffer storage unit made of high-quality steel S235JR; inside: untreated; outside: primer-coated Pressure resistance of buffer storage unit of 3 bar/utility water storage unit 10 bar Two large-surface bare-tube heat exchangers CFC-free flexible foam insulation with PVC top coat, RAL colour silver 9006 Temperature sensor, variably positionable by means of sensor terminal strip The utility water storage unit is equipped with a circulation connection and a cleaning flange as standard. From 800 l, 1 ½" sleeve shifted by 30° for optional el. heating (RCN 65 - 4 kW )at height of connection piece A5 All outside thread, flat-sealing

* To achieve the rated output figure cited, the boiler output has to be greater than the continuous operation specified.** Standby volume between connections A5 und A6; continuous operation [l/h] = 10 min. peak tapping quantity x 6 at boiler output > continuous operation

*** Standby volume between connections A1 und A6; continuous operation [l/h] = 10 min. peak tapping quantity x 6 at boiler output > continuous operation

The KSE Combination Storage Unit 250/200 450/200 600/200 700/200 850/200 1100/200Volume of Combination Storage Unit (HTG/HW) [litres] 250/200 450/200 600/200 700/200 850/200 1100/200Diameter without insulation [mm] 600 700 790 790 900 900Diameter with insulation [mm] 800 900 990 990 1100 1100Insulation [mm] 100Height [mm] 1960 1970 2020 2190 2000 2430Tilting height [mm] 2000 2005 2060 2230 2050 2470Heating surface, top/bottom [m2] 1,6 2 2,4 2,6 2,9 3,3Water volume, HX, top/bottom [Liter] 9,6 12 14,5 15,7 17,5 20Rated output figure* as per DIN 4708, KSE 1,3 1,8 2,1 2,5 3 3,2max. T/max. PTW (KSE) [°C / bar] 95 / 10max. T / max. P HW heating [°C / bar] 110 / 16max. T / max. P Buffer Storage Unit [°C / bar] 95 / 3Cold/hot water, outside thread [inches] G ¾ G ¾ G ¾ G ¾ G ¾ G ¾Circulation (Circ.) outside thread [inches] G ¾ G ¾ G ¾ G ¾ G ¾ G ¾Heat exchanger (FF/RF) all outside thread [inches] G 1 G 1 G 1 G 1 G 1 G 1Loading/unloading connections (A2-A5) outside thread [inches] G 1 G 1 G 1 G 1 G 1 G 1Loading/unloading connections (A1+A6) outside thread [inches] G 1¼ G 1¼ G 1¼ G 1¼ G 1¼ G 1¼Electric heating (el. heating) inside thread [inches] – – Rp 1½ Rp 1½ Rp 1½ Rp 1½Sensor/controller connections Sensor terminal strip



Combination/Buffer Storage Unit KSE-D

The KSE Combination Storage Unit 250/200 450/200 600/200 700/200 850/200 1100/200DimensionsA1 [mm] 105 110 125 125 110 110RL1 (only Models 1 & 2) [mm] 195 200 225 225 210 210A2 [mm] 495 500 540 570 525 600VL1 (only Models 1 & 2) [mm] 595 600 645 685 630 730RL2 (only Model 2) [mm] 695 700 745 785 730 830A3 [mm] 795 800 850 900 835 960A4 [mm] 995 1000 1060 1130 1045 1220VL2 (only Model 2) [mm] 1095 1100 1165 1245 1150 1350A5 [mm] 1195 1200 1265 1360 1250 1470ELECTRIC HEATING [mm] – – 1265 1360 1250 1470A6 [mm] 1715 1720 1745 1930 1730 2150Weight of KSE [kg] 244 269 319 334 367 399

Article number Article number13500450 Combination Storage Unit, 450 l with 200-l utility water storage unit13500650 Combination Storage Unit, 650 l with 200-l utility water storage unit13500800 Combination Storage Unit, 800 l with 200-l utility water storage unit13500900 Combination Storage Unit, 900 l with 200-l utility water storage unit13501050 Combination Storage Unit, 1050 l with 200-l utility water storage unit13501300 Combination Storage Unit, 1300 l with 200-l utility water storage unit



Buffer Storage Unit with set of tubing PSD-R


An standing storage unit made of S235JR steel with a large-surfacebare-tube heat exchanger

Inside untreated, outside with primer coat Temperature sensor, variably positionable by means of sensor

terminal strip CFC-free, 80-mm PU flexible-foam insulation with PVC top coat

incl. floor insulation in accordance with Part 8 of DIN 4753,RAL colour silver 800 thickness, RAL colour silver 9006

Pressure resistance 3 bar

Dimensions PSD-R 500 PSD-R 800 PSD-R 1000 PSD-R 1500 PSD-R 2000A1, RF [mm] 245 246 246 320 365A2 [mm] 645 646 786 786 905FF [mm] 870 816 946 1020 1065A3 [mm] 1045 1046 1326 1253 1445A4 [mm] 1405 1446 1866 1720 1985Weight (without insulation) [kg] 120 183 202 281 350

Article number Article number Description13700500 Buffer Storage Unit, 500 l with insulation & set of tubing13700800 Buffer Storage Unit, 800 l with insulation & set of tubing13701000 Buffer Storage Unit, 1000 l with insulation & set of tubing13701500 Buffer Storage Unit, 1500 l with insulation & set of tubing13702000 Buffer Storage Unit, 2000 l with insulation & set of tubing

Storage unit model PSD-R 500 PSD-R 800 PSD-R 1000 PSD-R 1500 PSD-R 2000Table of Contents [litres] 500 800 1000 1500 2000Diameter without insulation [mm] 650 790 790 1000 1100Diameter with insulation [mm] 810 990 990 1200 1300Insulation [mm] 80 100 100 100 100Height with insulation [mm] 1700 1802 2202 2130 2410Tilting height [mm] 1710 1780 2180 2150 2450Heating surface [m2] 2,5 2,5 3,2 4,25 4,25Water volume, HX [Liter] 15,7 15,7 20,1 26,7 26,7max. T / max. P storage unit [°C / bar] 95 / 3 95 / 3 95 / 3 95 / 3 95 / 3max. T / max. P GWT [°C / bar] 110 / 16 110 / 16 110 / 16 110 / 16 110 / 16Heat exchanger outside thread (FF/RF) [inches] G 1 G 1 G 1 G 1 G 1Loading/unloading connections (A1-A4) [inches] Rp 1½ Rp 1½ Rp 1½ Rp 1½ Rp 1½Electric heating This is not possible.Inspection flange (RFL) –Sensor/controller connections Sensor terminal stripThermometer connection –Air bleed [inches] Rp 1¼ Rp 1¼ Rp 1¼ Rp 1¼ Rp 1¼


Storage Units and Heat Exchangers S O L A R T E C H N I K

Accessories List for Storage Units

Built-in electric heating systems for vitreous enamelled storage units

Built-in electric heating systems for combination storage units(From volume of 800 l in total volume)

1½“ outside thread, controller 30°-80° C, STP fixed 110° C

Output [kW] Voltage [V] Depth [mm]3,0 400 3903,75 400 5504,5 400 5006,0 400 550

Output [kW] Voltage [V] Installation depth [mm]4,0 400 2754,0 230 275

Article number Description13000502 Electric Heating Element EHP30 3000 W / 400 V / 390 mm13000510 Electric Heating Element EHP37 3750 W / 400 V / 320 mm13000503 Electric Heating Element EHP45 4500 W / 400 V / 500 mm13000501 Electric Heating Element EHP60 6000 W / 400 V / 550 mm

Article number Description13000504 Electric Heating Element EHP30 3000W/230V/375 mm

Article number Description13000508 Electric Heating System for Combination Storage Unit 4000 W/400 V/275 mm13000509 Electric Heating System for Combination Storage Unit 4000 W/230 V/275 mm

Built-in electric heating systems designed with insulation especially for use in vitreouslyenamelled solar and utility-water storage units as supplementary or emergency heating,for horizontal installation.

Simple installation provided by 1½" threaded head with outside thread. Temperature is preselected by a thermostat with a setting range of 30°-75° C. Temperature-limiting safety switch 95° C Comes with operating instructions and circuit diagram. For installation in a blind flange, be sure to also order a blind flange with sleeve in sizes that fit. Casing: plastic

Note: The electric connection may only be made by authorised and qualified personnel in accordancewith VDE regulations and ordinances by the PUCs (public utility companies).This must also be complied with in cases of malfunctions and repairs.Combinations with CrNi boilers are not advisable.

Output [kW] Voltage [V] Depth [mm]3,0 230/400 (390)375

GelötetePlattenwärmetauscher



SolderedPlate-type Heat Exchangers


Plate-type Heat Exchangers S O L A R T E C H N I K

Note:You get the best efficiency through our customised design (calculation)of the heat exchanger FREE OF CHARGE.

Maintenance-free A pressure- and temperature-resistant, lightweight heat exchanger Short response times for temperature changes (on account of small volumes) Minimum soiling factor due to optimised embossed pattern for the plate Self-cleaning Optimised design for every application Low space requirement/kW-output 100% exploitation of materials

Article number Description19000012 Plate-type Heat Exchanger B25* 10 with insulation19000013 Plate-type Heat Exchanger B25* 20 with insulation19000014 Plate-type Heat Exchanger B25* 30 with insulation19000015 Plate-type Heat Exchanger B25* 40 with insulation19000016 Plate-type Heat Exchanger B25* 50 with insulation

Model Output [kW] Collector area m2 Pressure loss kPaB25T*10 – 7,2 bis 12 5/5B25T*20 – 7,8 – 19,8 13 – 33 10/8B25T*30 – 20,4 – 34,2 34 – 57 13/10B25T*40 – 34,8 – 49,2 58 – 82 15/12


Tubing and insulating systems S O L A R T E C H N I K

Flexible Solar Tubing Systems


Thermoflex EWK double

Highly flexible high-grade steel corrugated tube With integrated sensor cable With high-temperature India rubber to +150° C, and for Bending radii: DN 16 and DN 20 = 0.15 m, DN 25 = Insulation thickness: 13 mm Available on request: Insulation thickness: 19 mm

Article number DescriptionDN16:12001001 High-grade steel corrugated tube/rubber-insulated, 2xDN16-13 mm, by the metre12001002 High-grade steel corrugated tube/rubber-insulated, 2xDN16-13 mm, 10-m bundle12001003 High-grade steel corrugated tube/rubber-insulated, 2xDN16-13 mm, 25-m bundle

DN20:12002000 High-grade steel corrugated tube/rubber-insulated, 2xDN20-13 mm, by the metre12002002 High-grade steel corrugated tube/rubber-insulated, 2xDN20-13 mm, 10-m bundle12002003 High-grade steel corrugated tube/rubber-insulated, 2xDN20-13 mm, 25-m bundle

DN25:12002001 High-grade steel corrugated tube/rubber-insulated, 2xDN25-13 mm, by the metre12002004 High-grade steel corrugated tube/rubber-insulated, 2xDN25-13 mm, 10-m bundle12002005 High-grade steel corrugated tube/rubber-insulated, 2xDN25-13 mm, 25-m bundle

GEO-TEC Thermoflex Solar Tubing Systems consist of twotubes glued to one another, and insulated high-gradesteel corrugated tubes.The insulation and sheathing are high-temperature-resistant and available in customised lengths.Simple separation of the twin tubes without damaging theprotective foil or the insulation enable problem-free tu-bing of the solar collector system.The Easy Drill Screw-Connection Kit allows very simplescrewed connections of the high-grade steel corrugatedtube to the lines and fittings.The GEO-TEC Thermoflex tubing systems are providedwith a black, tear-resistant outer sheathing.Available in lengths of: 10 m, 15 m, 20 m or 25 m. Cus-tomised lengths are possible up to 100 m, and will be sup-plied on request.

The tubes are rolled in bundles, EWK to DN 20 in 800 x 800cardboard box, EWK DN 25 shrink-wrapped on pallets.Comes with: As standard, four Screw Connection Kits withoutside thread and one oval clamp fastening set comespacked with each EWK bundle.

DN L x B cmDN 16 122 x 60DN 20 134 x 66DN 25 148 x 73

Table with dimensions:

Article number Description Coupling nut (inches) Outer thread red.11000116 Screw-Connection Kit with outer thread DN 16 3/4 1/2 Zoll11000120 Screw-Connection Kit with outer thread DN 20 1 3/4 Zoll11000013 Screw-Connection Kit with outer thread DN 25 1 1/4 1 Zoll

11000024 Screw-Connection Kit with solder-end DN 16 3/4 18 mm11000025 Screw-Connection Kit with solder-end DN 20 1 22 mm11000026 Screw-Connection Kit with solder-end DN 25 1 1/4 28 mm

11016012 Screw-Connection Kit, Coupling Set DN 16 3/4 3/4 Zoll11020034 Screw-Connection Kit, Coupling Set DN 20 1 1 Zoll11000030 Screw-Connection Kit, Coupling Set DN 25 1 1/4 1 1/4 Zoll




Thermoflex EW High-grade steel corrugated tube with low corrugation height Resistant to rust, acid, heat and vibration Very good flexibility and compression strength Simple design with detachable screwed connections Available in bundles up to 100 m Short lengths are promptly available from warehouse.

Article nu. Description Dimension (inches) Lengths12000002 High-grade steel corrugated tube, DN 16 by the metre 1/2 By the metre

12000003 High-grade steel corrugated tube, DN 16 25 m, bundle 1/2 2512000004 High-grade steel corrugated tube, DN 16 50 m, bundle 1/2 5012000005 High-grade steel corrugated tube, DN 16 100 m, bundle 1/2 100

12200001 High-grade steel corrugated tube, DN 20 by the metre 3/4 Meterware122000011 High-grade steel corrugated tube, DN 20 25 m, bundle 1/2 25122000012 High-grade steel corrugated tube, DN 20 50 m, bundle 1/2 50122000013 High-grade steel corrugated tube, DN 20 100 m, bundle 1/2 100

12200002 High-grade steel corrugated tube, DN 25 by the metre 1 Meterware122000014 High-grade steel corrugated tube, DN 25 25 m, bundle 1/2 25122000015 High-grade steel corrugated tube, DN 25 50 m, bundle 1/2 50122000016 High-grade steel corrugated tube, DN 25 100 m, bundle 1/2 100

Easy Drill Screw-Connection KitAvailable as Screw-Connection Kit with outside thread,with solder end or as a coupling set

Consists of: 1 coupling nut 1 spacer ring 1 Easy Drill washer 1 special-purpose seal 1 screw-in part with broad sealing surface




Thermoflex EW for Underground Installation Two highly flexible high-grade steel corrugated tubes For house connections, distribution lines & connecting lines Insulation: rock wool , 0.037 W/mK, temperature-resistant to 250°C Sheathing tube: flexible corrugated PE-HD sheathing tube Integrated sensor cable, 4 x 0.5 mm² Fixed lengths according to reques

Article number Description11000216 High-grade steel corrugated tube for underground installation, DN 1611000220 High-grade steel corrugated tube for underground installation, DN 2011001225 High-grade steel corrugated tube for underground installation, DN 25

Article number Description11000234 End Cap AUSTROFLEX EW SOLAR A 160 DN 2x1611000233 End Cap AUSTROFLEX EW SOLAR A 160 DN 2x2011000231 End Cap AUSTROFLEX EW SOLAR A 160 DN 2x25

Plastic Cap for Thermoflex EW Sturdy plastic cap for a twin tubes with a hole lead-through for

the sensor cable drawn in. Colour: white For both indoor and outdoor use.

Article number Description13300121 Protective hose for outdoor areas, universally split

Protective hose for outdoor areas UV-resistant, weather- and raptor-proof Thickness: 1.5 mm Black Form of delivery: rolled in 10-m bundles Slit on one side for easy installation Maximum service temperature 135° C Elongation at tear 400 - 600%


Stoves S O L A R T E C H N I K

Chopped Wood Stoves

Stove door With movable panel that prevents smokefrom escaping while wood is being added.

Combustion chamber Lined all around with special, chemicallybonded fireclay bricks

Casing Solid, welded boilerplateThickness: 3-5 mm

Ash container Volume: 13.5 litresFire box Volume: 80 litresFuel Wood to 20% moisture or wood briquettesTotal rated output 16 kWHeating water output 11 kWAir space output 5 kWExhaust gas temperature at rated output Approx 250° CWater volume of the heat exchanger 7.5 litresMax. operating pressure 3 barFuel consumption at rated output 4.9 kg/hMinimum chimney draught 15 Pa.Minimum chimney size 250 cmWeight 220 kgHeight/Width/Depth 1030/570/510 mm

The GEO-TEC B 16-11 Stove is used in detached houses, properties ofa similar size and as a single housing-unit stove.It impresses people with its timeless design and is also an eye-catcher.The visible flames it provides for in a sitting room convey a special roomatmosphere.The GEO-TEC B 16-11 Stove has total output of 16kW, which is distributedto 11 kW in the water-bearing components and 5 kW on the air side.

Article number Description700100 Woodburning Stove B 16/11700101 Regumat RTA

SolareHeizungsunter-stützung

Raumheizung

Kaltwasser

Bio 16-11

Solar collectors

Solar heatingsupport

Hot water

Room heating system

Cold water



Pellet Stove Saturn S7

The Saturn S7 impresses people with its optimum combination of a pellet boiler and a pellet stove.High-quality materials and very modern technology guarantee high performance and lasting reliability.Professional commissioning must be carried out to use the stove in optimum fashion.Only a valid commissioning certificate guarantees warranty claims.

Article number Description700300 Pellet Stove SATURN, Black700301 Pellet Stove SATURN, Bordeaux red700302 Pellet Stove SATURN, Silver

Silver Bordeauxred

Black

Total heat output, max. 7.5 kW / 6450 kcal/hTotal heat output, min. 2.1 kW / 1806 kcal/hOutput at max. 84.2% (>80%)Output at min. 82.7% (>80%)Flue gas outlet temperature at max. 170° CFlue gas outlet temperature at min. 120° CCO 13% O2 at min. and at max. 0.056 - 0.026 %CO2 at min. and at max. 3.7 % - 5,6 %Exhaust gas mass at min. and at max. 4.2 - 9.5 g/secMinimum exhaust at max. output 0.12 mbar – 12 PaMinimum exhaust at min. output 0.10 mbar – 10 PaCapacity of the pellet container 52 lPellet type Pellets with 6-8 mm Ø, pellet size 5/30 mmPellet consumption per hour Min. -0.6 kg/h* max.- kg/h* -1.7 kg/h*Autonomy of operation At min. - 28 h* at max. 10 h*Room heating capacity m3 160/40 – 185/25 – 215/30**Admission of combustion air Outer diameter 50 mmFlue gas outlet Outer diameter 80 mmMaximum current consumption 270 wattMains voltage and frequency 220 volts/50 HzNet weight 112 kgGross weight 122 kg

* These values may fluctuate depending on type and size of the pellets used.** Room heating capacity depending on requirement Kal/m3



Pellet Stoves, Hydro N21-18

The GEO-TEC N 21-18 impresses people with its optimum combination of a pellet boiler and a pellet stove.High-quality materials and very modern technology guarantee high performance and lasting reliability.An integrated water jacket makes it possible to also operate a heating system with the N 21-18.The heating output can be regulated from 5.4 to 21.5 kW, with efficiency of over 90%.

Total heat output, max. 21.5 kW (18.490 kcal) / 16.2 kW (13.932 kcal)***Total heat output, min. 6.2 kW (5.332 kcal) / 3.7 kW (3.182 kcal/h)***Output: at max. 92 % (> 90%)Output: at min. 93 % (> 90%)Flue gas outlet temperature at max. 250° CFlue gas outlet temperature at min. 100° CCO 13% O2 at min. and at max. 0.055 - 0.018%CO2 at min. and at max. 5.5% - 11.9%Exhaust gas mass at min. and at max. 7.3 - 13 g/secMinimum exhaust at max. output 0.12 mbar - 12 PaMinimum exhaust at min. output 0.10 mbar - 10 PaCapacity of the pellet container 52 lPellet type Pellets with 6 mm Ø pellet size 5/30 mmPellet consumption per hour Min.-1 kg/h* max.-4 kg/h*Autonomy of operation At min.-33 h* at max. 9 h*Room heating capacity m3 185/40 - 215/35 - 250/30**Admission of combustion air Ø 50 mmFlue gas outlet Ø 80 mmMaximum current consumption 270 wattMains voltage and frequency 220 volts / 50 HzNet weight 125 kgGross weight 135 kg

Article number Description700200 Pellet Stove HYDRO, Bordeaux red700201 Pellet Stove HYDRO, Black700202 Pellet Stove HYDRO, Desert700203 Pellet Stove HYDRO, Salt & Pepper

Desert Salt & PepperBlack

Bordeauxred* These values may fluctuate depending on type and size of the pellets used.

** In Italy only pellets with a diameter of 6 mm may be used.*** Calorific values of 5180 Kcal/kg



Solar Active GEA Pellet Stoves

Article number Description700500 Pellet Stove Solar ACTIVE GEA Black700501 Pellet Stove Solar ACTIVE GEA Bordeaux red700502 Pellet Stove Solar ACTIVE GEA Silver

Silver Bordeauxred Black

Remote control withintegrated thermostat

Total heat output, max. 8,7 kw / 7482 kcal/hTotal heat output, min. 2,6 kw / 21,50 kcal/hOutput at max. 87,9 % (> 85%)Output at min. 90,7 % (> 85%)Flue gas outlet temperature at max. 92°CFlue gas outlet temperature at min. 168°CCO 13% O2 at min. and at max. 0.042 – 0.017 %CO2 at min. and at max. 4,5 % – 8 %Exhaust gas mass at min. and at max. 4 – 7,7 g/secMinimum exhaust at max. output 0,12 mbar – 12 PaMinimum exhaust at min. output 0,10 mbar – 10 PaCapacity of the pellet container 28 litresPellet type Pellets with 6 mm ø pellet size 5/30 mmPellet consumption per hour Min. - 0,6 kg/h* max. - 2 kg/h*Autonomy of operation At min.-28h h* At max. 9 h*Room heating capacity m3 187/40 – 214/35 – 250/30**Admission of combustion air Outer diameter 50 mmFlue gas outlet Outer diameter 80 mmMaximum current consumption 270 wattMains voltage and frequency 220 volts/50 HzNet weight 120 kgGross weight 140 kg

The SOLAR ACTIVE Pellet Stove is the optimum modern-age stove with ACTIVEsystem for automatic air adjustment system, depending on the pellet type.

Key data: Weight: 120 kg, fire tube connection: diameter 80 mm

* These values may fluctuate dependingon type and size of the

** Room heating capacity depending onrequirement Kal/m3


Trade Fair and Promotional Items S O L A R T E C H N I K

Aluminium and High-grade Steel Collectors

PVC Kit with mini-collector/fastening materials

PVC kit with: 1 Mini-collector 210 x 310 mm High-grade steel or aluminium model

or Installation materials

Kollektor Schnittmodell für Messen

Innenleben des Kollektors zum Teil sichtbar.Dieser Kollektor ist nur ein Schaustück undist daher nicht funktionstauglich.

Article number Description11000500 Mini-collector, aluminium11000600 Mini-collector high-grade steel11000700 Installation materials

Article number Description77002003 Cross-section model, aluminium500900 Cross-section model, high-grade steel

T i t a n i u m a b s o r b e r s


Solar Set S O L A R T E C H N I K

We will put your Solar Set together for utility water heating support and/or heatingsupport, doing so according to your particular requests.


General Terms of Business S O L A R T E C H N I K

of GEO-TEC Solartechnik GmbH, Villacherstraße 95, A-9800 Spittal/Drau

Our Terms and Conditions of Business below apply to all price quotes,contracts, deliveries and other performance.Any conditions by a Client differing from these, also including mere ad-ditional conditions, which we have not expressly approved in writing,shall be excluded, even if we have not expressly opposed such in theindividual case.

1. Price quotes and acceptance of ordersOur price quotations are subject to confirmation. Orders as well as anychanges to orders placed with us shall be binding for the Buyer in allcases, irrespective of whether they are direct or via our sales repre-sentatives in the field. Orders and changes placed with us shall onlybecome binding on our written confirmation of the order.

2. PricesAll prices are ex works and, unless something else is agreed, are inwithout turnover tax (VAT), which shall be charged at the respectivevalid rate. All prices are current prices. For orders without an expressprice agreement, the prices for the day of delivery shall apply. We areentitled to make appropriate price increases if, after quoting a price,changes occur in the prices of raw materials or supplies, wages,salaries, freight or other public charges. Cash discounts, discounts andtime allowed for payment shall require special agreement.

3. Delivery, passing of risk, shipping & packagingDeliveries are carried out ex our warehouse. Unless otherwise agreedin writing, shipping is carried out chargeable to and at the risk of theordering party. Our deliveries shall be considered as carried out upontransfer to the Buyer, the haulage company or haulage contractor, orwhen notification is made of readiness for dispatch. Our deliveries aresubject to correct deliveries on schedule by our front-end suppliers.Freight costs as well as the costs of any insurance for shipping thatmight be requested by the Buyer shall be chargeable to the Buyer. Theexecution of any special loading or shipping rules set by Buyers shallbe carried out at the Buyer’s risk and expense.We shall be entitled to carry out partial performance to a reasonableextent. If in our opinion packaging is required, it shall be carried outin the manner usual in the trade always at the Buyer’s expense.

4. Time periods for and dates of delivery

1. Delivery dates specified should only be considered as approximate.Any agreement of fixed deadlines shall require our express confir-mation to be effective. When a fixed deadline had been agreed,then the time period for delivery shall begin with the date of ac-ceptance of the order, but not before complete clarification of allthe details for its execution. If the Buyer is obliged to obtain anydocuments, specifications, permits or clearances, or to furnish adown payment, then the time period for delivery shall not beginuntil such obligations have been met.

2. If we are not able to deliver within the contractually agreed periodof time, then, having set a grace period for us in writing of at least14 days that threatens refusal, the Buyer may withdraw from the

contract subject to the provision in Para. 3. The Client shall only beentitled to claims for compensation in cases of damages due todelay or non-performance if the delivery has been delayed due togross fault on the part of the contractor, a properly constitutedagent or one of our managing salaried employees.

3. Any unforeseen circumstances, for which we are not responsible,such as force majeure, war, uprisings, lock-ins or lock-outs, strikesand lock-outs, difficulties procuring materials, operational inter-ruptions, energy shortages, lack of means of transport and similarcircumstances (also if such occur at front-end suppliers’) shall ex-tend the delivery period commensurately, this being by at least theduration of the hindrance if such hinders us from meeting our com-mitments on time. If it is foreseeable that a delay in delivery willlast longer than two months, then both parties shall be entitled towithdraw. Buyers may not derive any claims for damages from an ex-tension of the time period for delivery, even in cases of withdrawal.We shall also not be responsible for the aforementioned circum-stances if they develop during a delay already existing. In importantcases, we will notify ordering parties as soon as possible about thestart and end of such hindrances.

5. Payment1. Unless otherwise agreed, our invoices are due and payable strictly

net within 14 days as of the invoice date without any deductions.Before old invoices already due and payable from earlier deliveriesare paid, no deductions will be granted on new invoices.

2. Bills of exchange will only be accepted with a relevant agreementand even then (as also with cheques) only on account of perform-ance. Discount charges and other costs shall be borne by the draweeand must be immediately reimbursed. We shall not be liable for time-ly submission, protests, etc. What is more, accepting a bill of exchangeshall not extend the term of payment of the purchase price.

3. From the time when due and payable on, 1% in interest after duedate will be charged per month begun. If this clause should be in-effective, interest after due date is agreed in the amount of 10 %p.A.

4. In case of default on payment, we charge banking debit interestunless the Client proves that our damages are lower than this flatrate. At least the agreed interest after due date, however, shall beowed also after the default occurs. The assertion of claims for dam-ages caused by default that are actually higher shall not be ruledout.

5. If the Client goes into default on payment or acceptance, all out-standing invoices shall immediately become due and payable. Incase of non-compliance with payment obligations within the scopeof the business relations or in case of a proven deterioration in theClient’s financial position, we shall be entitled to make any furtherwork on the order as well as its delivery dependent on reasonablesecurity or cash in advance. If our products have already been de-livered, then we may demand immediate payment of the entireamount remaining regardless of the terms of payment agreed. Thisshall also apply if it should later emerge that the financial positionhad been substantially worse when the contract was concluded thanwe had assumed. If the security or advance payment are not pro-vided within a reasonable time limit to be set by us, we shall be en-titled to withdraw.


Allgemeine Geschäftsbedingungen S O L A R T E C H N I K

der GEO-TEC Solartechnik GmbH, Villacherstraße 95, A-9800 Spittal/Drau

6. The assertion of rights of lien or retention and set-offs againstcounterclaims shall be inadmissible unless the counterclaims havebeen legally established or accepted by us.

7. Payments shall always be credited to the oldest outstanding invoiceor account receivable. The Buyer will be charged with any expensesarising in connection with bank transfers or based on documentarycollection and documentary credit for our deliveries in the Buyer’scountry or the country of destination.

6. Reservation of title1. All merchandise and products we deliver are delivered only under

reservation of title and extended reservation of title. The merchan-dise shall remain our property until full payment is made (in casesof payment by cheques and/or bills of exchange, until they arecashed) for all debts arising from the business relations, includingaccessory claims and claims for damages. This shall also apply if allor individual claims of ours are included in a current account, andthe balance has been drawn and accepted. If a payment is made bya cheque/bill-of-exchange transaction (acceptor’s bill), the prop-erty shall not be transferred until the bill has been cashed withoutreservation.

2. The Client may neither pledge nor assign by way of security reservedmerchandise (i.e. also merchandise that is still in our co-ownershipafter being connected, mixed or processed according to the fol-lowing conditions).

3. If important contractual obligations are violated, in particular incase of default of payment, then, after a dunning procedure, weshall be entitled to take back the merchandise, the Buyer beingunder obligation to surrender such. Unless the Statute Covering In-stalment Sales is applied, our taking back or seizing merchandiseshall only imply withdrawal from the contract if we expressly de-clare this in writing. If, in case of default of payment, we exerciseour right to take back merchandise and take back merchandise de-livered under reservation of title, a credit for this shall only be madein the amount of 50% of the purchase price set off. The differenceshall be for covering our expenses, such as freight costs, new mar-keting costs, packaging costs, etc. The Client shall retain the rightto furnish proof of less damage.

4. The Client must immediately inform us about seizures or any otherimpending adverse effect on our rights by third parties, stating thedetails of the circumstances that enable intervention.

5. The Buyer shall be entitled to process or resell the reserved mer-chandise in the course of orderly business. The Client’s receivablesarising from reselling the reserved merchandise are already now as-signed to us as security for all of our claims arising from the busi-ness relation. We accept this assignment. If the reservedmerchandise is sold with third-party merchandise either in aprocessed or unprocessed condition, the receivables shall only beconsidered as assigned in the amount of the invoice value of the re-served merchandise delivered by us. The Client shall be authorisedto collect the receivables assigned, doing so for us in a fiduciary ca-pacity. This authorisation to collect may be revoked if the Buyerdoes not properly fulfil its payment obligations arising from thecontract on which they are based. If: payment is suspended; bank-ruptcy, composition proceedings in or out of court or any other de-

terioration of assets is applied for or proceedings for such are in-stituted, we may furthermore demand that the Client: notify us bothof the receivables assigned and of their debtor; provide all the in-formation required to collect the receivables; hand over the perti-nent documents and inform the debtors about the assignment. TheClient furthermore authorises us already now for such a case as thisto inform the buyers about the assignment of future claim.

6. We shall be under obligation to release our choice of the items ofsecurity given to us on demand by the Buyer if their value exceedsthe receivables still existing vis-à-vis the Client by more than 20%.

7. Taking back merchandiseIn case merchandise is taken back that is subject to special agree-ments, no claim shall exist to the purchase price being paid back, butrather only to the delivery of replacement merchandise.

8. Make-and-hold ordersUnless otherwise agreed for make-and-hold order, the merchandisemust be completely called one year at the latest after being ordered.When one year is up we shall be entitled to charge for the merchan-dise, demanding its immediate payment.We shall furthermore be entitled to charge for the storage costs ac-cording to the rates in the haulage industry. The current price valid ap-plicable on the date of delivery shall apply for make-and-hold orders.

9. Notices of defects, warranty & liability1. The merchandise we deliver must be inspected on arrival without

delay for proper quality, specific performance and completeness.Complaints must be made in writing. In cases of discernable de-fects, we must receive objections immediately after receipt of themerchandise. Defects which cannot be established with a propercommercial inspection must be asserted in writing within a timelimit of three months after the ordering party receives the mer-chandise, with the right of recourse for defects being lost.We shall not take responsibility either for material defects caused byunsuited or improper storage, transport or manipulation, uses, in-correct installation or commissioning by the customer or third par-ties, usual wear, faulty or negligent handling or for anyconsequences of improper alterations or repair work carried out bythe customer or third parties without our consent. The same shallapply to defects that reduce the value or suitability of the mer-chandise only to an insignificant degree. We must in any event begiven opportunity to ascertain defects given notification of. Mer-chandise objected to must be sent back to us immediately on re-quest. Claims arising from defects shall be lost if the customer doesnot fulfil these obligations or, without our approval, carries out al-terations to merchandise already objected to.

2. In case of material defects, only reworking or replacements may bedemanded. If reworking and/or replacement should fail, the Clientshall be entitled to demand a lowering of the purchase price (re-duction) or cancellation of the purchase contract (nullification ofthe sale).


Allgemeine Geschäftsbedingungen S O L A R T E C H N I K

der GEO-TEC Solartechnik GmbH, Villacherstraße 95, A-9800 Spittal/Drau

3. Regardless of for what reason, we shall only be liable for grosslyculpable behaviour by the Contractor itself, our executive bodies orour management employees. Any liability for slight negligence andall fault of vicarious agents shall be excluded. If there is some lia-bility under our conditions, the compensation for damages may notexceed the loss incurred and the profit not realised, which the partyhaving violated the contract, allowing for circumstances that itknew about or should have known about when the contract was con-cluded.

4. In cases of functional defects on collectors, for five years as of theissue date of the invoice from GEO-TEC we offer (free of charge exworks) replacement for materials which demonstrably have not metone of the requirements of the standard EN 12975. A function guar-antee shall only be granted on collectors if all the main componentsof the collector system (fastening materials, pumping unit, frostprotection, expansion tank, storage unit, control system and metalcladding) are from GEO - TEC and verification is furnished both ofinstallation in technically correct fashion (in accordance with thestate of the art) and regular maintenance by qualified personnel(maintenance contract with a specialised company licensed to doso). A ten-year guarantee shall be granted for systems in Austria ifall the main components of the collector system (fastening mate-rials, pumping unit, frost protection, expansion tank, storage unit,control system and metal cladding) are from GEO - TEC and verifi-cation is furnished both of installation in technically correct fash-ion (in accordance with the state of the art) and regularmaintenance by qualified personnel (maintenance contract with aspecialised company licensed to do so).

Any liability shall, however, be ruled out for damage due to me-chanical strain or changes resulting from influences caused byweather. Slight colour deviations or spoiling of the surface whichhave no influence on the collector’s functioning shall also be ex-cluded from the warranty. What is more, no guarantee shall be as-sumed for glass breakage. Liability shall be excluded for damagedue to force majeure and malfunctions attributable to improper as-sembly or installation of our products. No liability shall be assumedfor any consequential damage due to defects.

The preconditions for liability by GEO-TEC Solartechnik GmbH arethat:

• The installation was carried out according to the installation in-structions in the respective valid version using the pertinent in-stallation materials from the GEO-TEC organisation.

• The assembly was carried out by an authorised specialised com-pany (heating engineer or fitter).

• GEO-TEC and/or its representatives have been provided the op-portunity to inspect complaints on site immediately after anysuch defects arise.

• There is certification of proper commissioning (properly filled-inacceptance certificate).

• An annual examination and maintenance has been carried outby a specialised company licensed to do so.

The warranties set up by GEO-TEC shall only apply vis-à-vis con-tracted companies, and respective parties to a contract shall beunder obligation both to inform end users of this fact and, on re-quest, to confirm such in writing.

5. If, after unsuccessful subsequent performance, the customer wantsto withdraw from the contract due to a defect of title or material de-fect, it shall not be entitled to any claims for damages besides thisdue to the defect. If, after unsuccessful subsequent performance,the customer wants compensation for damages, the merchandiseshall remain with the customer if this can be reasonably expectedof it. The compensation for damages shall be limited to the differ-ence between the purchase price and the value of the defectivething. This shall not apply if we have fraudulently caused the breachof contract. For individuals in business, the warranty is one year asof delivery of the merchandise. This shall not apply if the customerdoes not notify us about the defect in good time.

Only the manufacturer’s product description is agreed as always defin-ing the qualities of the merchandise. No public statements, recom-mendations or advertising by the manufacturer (for the productand/or individual components of it) shall constitute any additionalcontractual specifications of the qualities of the merchandise. If a cus-tomer is given defective installation instructions, we shall only beunder obligation to deliver defect-free installation instructions, butonly if the defect in the installation instructions stands in the way ofproper installation. If a delivery of products made by us cannot bemade by the date agreed due to reasons for which we are not respon-sible, then parts already manufactured shall, at the Buyer’s expenseand risk, be set aside in storage space that is roofed over and guarded.In such case, the warranty shall begin when the merchandise is putinto storage. As payment for this storage of manufactured merchan-dise, we charge 1% of the total order amount for each month of stor-age begun. These storage costs shall be due and payable at the end ofeach month of storage. In cases of simple and slight negligence, dam-age claims against us shall be limited to the value of the contract. Theguarantees we make only apply vis-à-vis individuals in business. Incase of any transferral of the guarantee there might be, a consumershould be expressly informed about this.

10. Partial inoperativenessIn any individual clauses of these conditions should be or become in-operative, the remaining agreements shall nonetheless remain oper-ative.

11. Place of fulfilment and legal venueOnly the court for A-9800 Spittal/Drau shall be competent for all pres-ent and future claims arising from the business relations with mer-chants who has been entered as a merchant in the commercial register,including claims based on bills of exchange and cheques. It is under-stood that Austrian law shall apply. The same legal venue shall applyif: the Client does not have a general legal venue domestically; itmoves its residence or habitual residence abroad after concluding thecontract; or its residence or habitual residence abroad is not known atthe time an action is filed.

Status date: 1 January 2007


Solar Collector Systems S O L A R T E C H N I K

ALU 450 Q, Audi Plant 2005

Geo-Tec Solartechnik GmbH • Villacherstraße 95 • 9800 Spittal/Drau • Telephone: +43 (0) 4762/61399-0 • Fax: DW 90 • E-mail: [email protected] • www.geotec.at

Trade Fair ISH 2007 S O L A R T E C H N I K

68


Trade Fair ISH 2007 S O L A R T E C H N I K


Absorber S O L A R T E C H N I K

In 1995 TiNOX GmbH was the first company to introduce to the market the newly developed, highlyselective absorber coating for solar thermal collectors.This patented "blue" coating based on titanium and quartz set new performance standards and alsoprovided an initial environmentally friendly alternative to the black chrome and black nickel coatingsprimarily in use back then.The TiNOX® titanium absorber coating is vaporised onto metal tape in a physical vacuum depositing(PVD) method, which it developed itself. Using an electron beam, titanium and quartz are vaporisedin a vacuum chamber, which then react with nitrogen and oxygen to form TiNOX (titanium nitrideoxide) and precipitate on the metal tape.The TiNOX® titanium absorber layer is abrasion-proof and can be processed into full-surface absorberpanels and fins using all common joining methods (laser welding,plasma welding, ultrasound welding, soft soldering and reshaping).

Its unique coat structure makes TiNOX® a highly selective absorber that has the followingproperties:

A high degree of absorption (low reflection) within the visible light range

95% absorption

A low degree of emission (high reflection) within the thermal radiation range

5 % emission

Maximum efficiency for solar thermal collectors

Your partner for highly selective coatings

T i t a n i u m a b s o r b e r s


Absorber S O L A R T E C H N I K

Coating structureThe base material used is a metal substrate with good reflection and thermalconduction.

A thin titanium carbide compound is used as an adhesion layer and diffusionbarrier.

The absorber coating consists of a titanium compound with oxygen and nitro-gen. This patented titanium oxynitride compound gave TiNOX its name.

There is also an additional anti-reflex coating and protective coating made ofquartz glass on the absorber layer. This minimisation of the surface reflectionfurther optimises the absorption of solar radiation.

Nature and the EnvironmentThe components of the TiNOX coating are entirely safe for thehuman organism and the environment.

TiNOX absorber coating is 100% recyclable.

The metal in the absorber is entirely reusable.

Certified Performance and Long-term StabilityThe outstanding properties of TiNOX are confirmed by test certificates fromindependent testing institutes, which applies to the optical parameters of theabsorption coefficient α and emission coefficient ε as well as the temperature-resistance and climate stability.

Guarantee of the performance stability of TiNOX absorbers:

To test the performance stability of selective absorber coatings, a testingmethod was developed in co-operation with various renowned research institu-tes. The so-called "Task X" Test (ISO draft proposal CD 12 952.2) simulates theinfluences of temperature and the environment which affect the selective coa-tings over many years of operation for the collector. The Task X Test guaranteesat least 95% of the efficiency factor in new condition after a simulated periodof use of 25 years.

The Original Blue is made of Titanium.


Notes S O L A R T E C H N I K

V I L L A C H E R S T R A S S E 9 5 • A - 9 8 0 0 S P I T T A L / D R A U

Telephone: +43 (0) 4762/61399-0 • Fax: DW 90 • E-mail: [email protected] • www.geotec.at

…for the

futureof our

children!

Let’suse thesun…


Cataloge 2008_2009 Without Price, English

Documents

Transcript of Cataloge 2008_2009 Without Price, English