Catalog_2014_English.pdf
-
Upload
mihai-dona -
Category
Documents
-
view
2 -
download
0
Transcript of Catalog_2014_English.pdf
2014CATALOG
edition
1 786 265 1960 Phone: +55 (18) 2101-9412
Av. Mariano Arenales Benito, 645 - Distrito Industrial CEP: 19043130Presidente Prudente | São Paulo | Brasil
Production Center
/grupostetsom
/Stetsom USA
www.STETSOM.com
Y E A R S
Remote + Central
RX2 CentralRX1 Central
ALCANCE CONTROL
LONG-RANGE REMOTE CONTROL
Long-range remote control of Audio and Video equipment
*500m range in open areas (line-of-sight)
Easy sync
Low-battery indicator on both remote and central unit
Pre-programmed memory bank for inter-operability with various brands of devices
Anti-cloning technology Power-Saver Smart Mode
“Learn” function
SX1 Remote + Central
TX1 Remote
CONTROL
Watch a demonstration video via QR CODE
SX2 Remote + Central
TX2 Remote
LONG-RANGE REMOTE CONTROLN
EW
CONTROL
16 FUNCTIONS2nd
Long-range remote control of Audio and Video equipment
*500m range in open areas (line-of-sight)
Easy sync
Low-battery indicator on both remote and central unit
Pre-programmed memory bank for inter-operability with various brands of devices
Anti-cloning technology
Power-Saver Smart Mode
“Learn” function
2nd Function (2nd) button
Remote + Central
REMOTE CONTROLAND LONG-RANGE SEQUENCERN
EW
16 FUNCTIONS2nd
SX3
Sequentially control and activate Audio and Video devices
*500m range in open areas (line-of-sight)
Easy sync
Low-battery indicator on both remote and central unit
Pre-programmed memory bank for interoperability with various brands of devices
Anti-cloning technology Power-Saver Smart Mode
“Learn” functionSequencing output programing capacity and response time (1 to 7 sec)
Includes 8 function and 7 sequencing outputs
Individual overload protection on all 7 outputs
Power off function
500m*Up to
CONTROL
Watch a demonstration video via QR CODE
range
500m*Up to
range500m*Up to
range
VISION LINEThe biggest show-off in the amplifier family, just got bigger!
Channels:
Power @ 13,8V 2 Ohms:
Power @ 13,8V 4 Ohms:
Power @ 13,8V Bridge 4 Ohms:
Minimum Work Impedance:
Input Impedance CABLE:
Input Impedance RCA:
Minimum Input Sensitivity CABLE:
Minimum Input Sensitivity RCA:
Total Harmonic Distortion:
Signal to Noise:
Frequency Response (-3dB) @ 2 Ohms:
Frequency Response (-3dB) @ 4 Ohms:
Crossover High Pass:
Crossover Low Pass:
Power Tension:
Consumption music signal:
Consumption bass signal:
Dimensions mm (L x W x H):
Weight:
1
1 x 250W RMS
1 x 150W RMS
-
2 OHMS
-
36 K OHMS
-
0,2V
> 0,03% THD
> 90 dB
5Hz to 50KHz
-
700Hz / Flat
90Hz / Flat
9 to 15V
10 A
20 A
44 x 127 x 121
0,310 Kg
VS 250.1
CLASS D AMPLIFIER
VS400.4 MINI4 0 0 W R M S
4
4 x 103W RMS
4 x 60W RMS
2 x 206W RMS
2 OHMS
-
15 K OHMS
-
0,2V
> 0,03% THD
> 90 dB
20Hz a 22KHz
-
90Hz / Flat
90Hz / Flat
9 to 15V
18 A
36 A
52 x 175 x 184
0,620 Kg
VS 400.44
4 x 100W RMS
4 x 50W RMS
2 x 200W RMS
-
20 K OHMS
-
0,2V
> 0,03% THD
> 90 dB
10Hz a 30KHz
-
90Hz / Flat
90Hz / Flat
9 to 15V
16 A
32 A
44 x 127 x 121
0,360 Kg
VS 400.4 MINI
2
2 x 125W RMS
2 x 80W RMS
-
2 OHMS
1K OHMS
10 K OHMS
1,6V
0,2V
> 0,03% THD
> 90 dB
50Hz to 23KHz
-
50Hz (Fixo)
-
9 to 15V
10 A
20 A
44 x 127 x 121
0,350Kg
VS 250.2 RCA
Stereo 2 OHMSBridge 4 Ohms
VENOM DIGITAL
Channels:
Power @ 13,8V Mono 1 Ohm:
Power @ 13,8V Mono 2 Ohms:
Power @ 13,8V Mono 4 Ohms:
Power @ 13,8V Stereo 2 Ohms:
Power @ 13,8V Stereo 4 Ohms:
Power @ 13,8V Bridge 4 Ohms:
Minimum output impedance:
Input Impedance:
Minimum Input Sensitivity:
Total Harmonic Distortion:
Signal to Noise:
Frequency Response (-3dB):
Crossover High Pass:
Crossover Low Pass:
Supply Voltage:
Consumption music signal:
Consumption bass signal:
Dimensions mm (L x W x H):
Weight:
4
-
-
-
4 x 200W RMS
4 x 140W RMS
2 x 400W RMS
2 OHMS
15K OHMS
0,2V
< 0,9 % THD
> 90 dB
10Hz to 22KHz
70Hz to 700Hz
40Hz to 700Hz
9,5 to 15V
35A
70A
40 x 240 x 230
1,8 Kg
4
-
-
-
4 x 150W RMS
4 x 120W RMS
2 x 300W RMS
2 OHMS
15K OHMS
0,2V
< 0,9 % THD
> 90 dB
10Hz to 22KHz
90Hz
90Hz
9,5 to 15V
26A
52A
40 x 240 x 230
1,8 Kg
1
1 x 650W RMS
1 x 390W RMS
1 x 210W RMS
-
-
-
1 OHM
30K OHMS
0,2V
< 0,9 % THD
> 90 dB
10Hz a 20KHz
10Hz a 2KHz
70Hz a 20KHz
9,5 to 15V
1 to 27A
1 to 54A
40 x 240 x 155
1,2 Kg
1
-
1 x 650W RMS
1 x 420W RMS
-
-
-
2 OHMS
30K OHMS
0,2V
< 0,9 % THD
> 90 dB
10Hz to 20KHz
10Hz to 2KHz
70Hz to 20KHz
9,5 a 15V
1 to 26A
1 to 56A
40 x 240 x 155
1,2 Kg
V 600.4-2Ω V 800.4-2ΩV 650.1 ES-1Ω V 650.1 ES-2Ω
V 1000.1 ES-2Ω V1800.4-2Ω
One will fit your system!
V1300.41 .300W RMS
CLASS D AMPLIFIER
Channels:
Power @ 13,8V Mono 1 Ohm:
Power @ 13,8V Mono 2 Ohms:
Power @ 13,8V Mono 4 Ohms:
Power @ 13,8V Stereo 1 Ohm:
Power @ 13,8V Stereo 2 Ohms:
Power @ 13,8V Stereo 4 Ohms:
Power @ 13,8V Bridge 2 Ohms:
Power @ 13,8V Bridge 4 Ohms:
Minimum output impedance:
Input Impedance:
Minimum Input Sensitivity:
Total Harmonic Distortion:
Signal to Noise:
Frequency Response (-3dB):
Crossover High Pass:
Crossover Low Pass:
Supply Voltage:
Consumption music signal:
Consumption bass signal:
Dimensions mm (L x W x H):
Weight:
1
-
1 x 1.050W RMS
1 x 630W RMS
-
-
-
-
-
2 OHMS
28K OHMS
0,2V
< 0,9 % THD
> 90 dB
10Hz to 20KHz
20Hz to 2KHz
50Hz to 20KHz
9,5 to 15V
2,4 to 34A
2,4 to 83A
40 x 240 x 242
2,8 Kg
4
-
-
-
-
4 x 500W RMS
4 x 290W RMS
-
2 x 1.000W RMS
2 OHMS
30K OHMS
0,2V
< 0,9 % THD
> 90 dB
20Hz to 22KHz
70Hz to 700Hz
40Hz to 700Hz
9,5 to 15V
90A
178A
40 x 240 x 365
3,0 Kg
V1300.4-2Ω4
-
-
-
-
4 x 400W RMS
4 x 260W RMS
-
2 x 760W RMS
2 OHMS
30K OHMS
0,2V
< 0,9 % THD
> 90 dB
20Hz to 22KHz
70Hz to 700Hz
40Hz to 700Hz
9,5 to 15V
65A
130A
40 x 240 x 365
3,0 Kg
3
2 x 90W RMS + 1 x 200W RMS @ 4ohms
2 x 55W RMS + 1 x 200W RMS @ 4ohms
-
630 OHMS
24 K OHMS
1,6V
0,2V
> 0,03% THD
> 90 dB
90Hz to 24KHz(Stereo)/10Hz a 90Hz(Mono)
10Hz to 90KHz
90Hz (Fixo)
90Hz (Fixo)
9 to 15V
16 A
32 A
44 x 127 x 121
0,360 Kg
VS 380.3
Stereo 2 OHMSMono 4 Ohms
V 1000.1 ES-1Ω1
1 x 1.000W RMS
1 x 550W RMS
1 x 300W RMS
-
-
-
-
-
1 OHM
25K OHMS
0,2V
< 0,9 % THD
> 90 dB
10Hz a 20KHz
20Hz a 2KHz
50Hz a 20KHz
9,5 to 15V
1,6 to 37,5A
1,6 to 75A
40 x 240 x 242
2,0 Kg
Channels:
Power @ 13,8V 2 Ohms:
Power @ 13,8V 4 Ohms:
Power @ 13,8V Bridge 4 Ohms:
Minimum Work Impedance:
Input Impedance CABLE:
Input Impedance RCA:
Minimum Input Sensitivity CABLE:
Minimum Input Sensitivity RCA:
Total Harmonic Distortion:
Signal to Noise:
Frequency Response (-3dB) @ 2 Ohms:
Frequency Response (-3dB) @ 4 Ohms:
Crossover High Pass:
Crossover Low Pass:
Power Tension:
Consumption music signal:
Consumption bass signal:
Dimensions mm (L x W x H):
Weight:
NEWNEW NEW
High-Power Amplifiers
5K EQ -1Ω4K2 EQ -2Ω
2K5 EQ -2Ω2K5 EQ -1Ω1K6 EQ -2Ω1K6 ES -1ΩChannels:
Power @ 13,8V 1 Ohm:
Power @ 13,8V 2 Ohms:
Power @ 13,8V 4 Ohms:
Power @ 13,8V 8 Ohms:
Power@ 12,6V 1 Ohm:
Power @ 12,6V 2 Ohms:
Power @ 12,6V 4 Ohms:
Power @ 12,6V 8 Ohms:
Supply Voltage:
Frequency Response:
Crossover Low Pass:
Crossover High Pass:
Subsonic Filter:
Bass Boost:
Total Harmonic Distortion:
Signal to Noise:
Minimum Input Sensitivity:
Minimum work Impedance:
Consumption /music signal(12,6v):
Consumption /bass signal(12,6v):
Dimensions mm (L x W x H):
Weight:
1
-
1 x 3.200W RMS
1 x 2.000W RMS
1 x 1.100W RMS
-
1 x 2.620W RMS
1 x 1.630W RMS
1 x 900W RMS
9,5 to 15Volts
10Hz to 25KHz
50Hz to 25KHz
10Hz to 700Hz
-
-
< 0,9 %
> 90 dB
0,2V
2 OHMS
2,5 to 133A
2,5 to 266A
75 x 310 x 279
3,5Kg
1
-
1 x 4.850W RMS
1 x 3.050W RMS
-
-
1 x 4.200W RMS
1 x 2.500W RMS
-
9,5 to 15Volts
10Hz to 15KHz
50Hz to 15KHz
10Hz to 700Hz
-
< 0,9 %
> 90 dB
0,2V
2 OHMS
3,1 to 207A
3,1 to 414A
75 x 310 x 310
4,1Kg
1
1 x 5.700W RMS
1 x 3.500W RMS
1 x 2.000W RMS
-
1 x 5.000W RMS
1 x 2.900W RMS
1 x 1.700W RMS
-
9,5 to 15Volts
10Hz to 15KHz
50Hz to 15KHz
10Hz to 700KHz
-
< 0,9 %
> 90 dB
0,2V
2 OHMS
3,8 to 236A
3,8 to 472A
75 x 310 x 375
5 Kg
1
-
1 x 1.780W RMS
1 x 1.030W RMS
-
-
1 x 1.600W RMS
1 x 830W RMS
-
9,5 to 15Volts
10Hz to 25KHz
50Hz to 25KHz
10Hz to 700Hz
-
-
< 0,9 %
> 90 dB
0,2V
2 OHMS
1,6 to 75A
1,6 to 150A
75 x 310 x 170
2Kg
1
1 x 1.720W RMS
1 x 1.035W RMS
-
-
1 x 1.600W RMS
1 x 820W RMS
-
-
9,5 to 15Volts
10Hz to 10KHz
50Hz to 10KHz
-
10Hz to 80Hz
0 to+12dB @ 45Hz
< 0,9 %
> 90 dB
0,2V
1 OHM
1,7 to 77A
1,7 to 155A
75 x 310 x 170
2,2Kg
14K2 ES-1Ω11K2 ES-1Ω7K2 ES-2Ω7K2 ES-1Ω6K5 ES-2Ω6K5 ES-1ΩChannels:
Power @ 13,8V 1 Ohm:
Power @ 13,8V 2 Ohms:
Power @ 13,8V 4 Ohms:
Power @ 12,6V 1 Ohm:
Power @ 12,6V 2 Ohm2:
Power @ 12,6V 4 Ohms:
Supply Voltage:
Frequency Response::
Crossover Low Pass:
Subsonic Filter:
Total Harmonic Distortion:
Signal to Noise:
Minimum Input Sensitivity:
Minimum work Impedance:
Consumption /Music signal(12,6v):
Consumption /Bass signal(12,6v):
Dimensions mm (L x W x H):
Weight:
1
1 x 9.200W RMS
1 x 5.300W RMS
-
1 x 7.530W RMS
1 x 4.500W RMS
-
9,5 to 15Volts
10Hz to 8KHz
50Hz to 8KHz
10Hz a 80Hz
< 0,9%
>90dB
0,2V
1 OHM
6 to 390A
6 to 780A
75 x 310 x 557
8,5Kg
1
-
1 x 8.580W RMS
1 x 4.900W RMS
-
1 x 7.320W RMS
1 x 4.160W RMS
9,5 to 15Volts
15Hz to 8KHz
50Hz to 8KHz
20Hz to 80Hz
< 0,9%
>90dB
0,2V
2 OHMS
6 to 344A
6 to 688A
75 x 310 x 557
8,5Kg
1
1 x 13.450W RMS
1 x 8.700W RMS
-
1 x 11.250W RMS
1 x 7.000W RMS
-
9,5 a 15Volts
10Hz to 8KHz
50Hz to 8KHz
10Hz to 80Hz
< 0,9%
>90dB
0,2V
1 OHM
6 to 550A
6 to 1.100A
75 x 310 x 685
11,0Kg
1
1 x 16.200W RMS
1 x 11.200W RMS
-
1 x 14.200W RMS
1 x 8.050W RMS
-
9,5 to 15Volts
15Hz to 8KHz
50Hz to 8KHz
20Hz to 80Hz
< 0,9%
>90dB
0,2V
1 OHM
7,3 to 600A
7,3 to 1.200A
75 x 310 x 792
13,0Kg
1
-
7.200W RMS
4.550W RMS
-
6.500W RMS
3.050W RMS
9,5 to 15Volts
10Hz to 8KHz
50Hz to 8KHz
10Hz to 80Hz
< 0,9%
>90dB
0,2V
2 OHMS
3,5 to 260A
3,5 to 520A
75 x 310 x 456
6,6 Kg
1
7.150W RMS
4.420W RMS
-
6.500W RMS
4.300W RMS
-
9,5 to 15Volts
10Hz to 8KHz
50Hz to 8KHz
10Hz to 80Hz
< 0,9%
>90dB
0,2V
1 OHM
3,5 to 293A
3,5 to 586A
75 x 310 x 456
6,6 Kg
3K3 EQ -2Ω1
-
1 x 4.000W RMS
1 x 2.600W RMS
1 x 1.600W RMS
-
1 x 3.350W RMS
1 x 2.250W RMS
1 x 1.400W RMS
9,5 to 15Volts
10Hz to 15KHz
50Hz to 15KHz
10Hz a 700Hz
-
-
< 0,9 %
> 90 dB
0,2V
2 OHMS
2,8 to 160A
2,8 to 320A
75 x 310 x 310
4,1Kg
2K5 EQ3200W RMS
VULCAN DIGITAL
CLASS D AMPLIFIER
1
1 x 3.000W RMS
1 x 2.000W RMS
1 x 1.200W RMS
-
1 x 2.500W RMS
1 x 1.700W RMS
1 x 1.000W RMS
-
9,5 to 15Volts
10Hz to 25KHz
50Hz to 25KHz
10Hz to 700Hz
-
-
< 0,9 %
> 90 dB
0,2V
1 OHM
3,0 to 123A
3,0 to 245A
75 x 310 x 279
3,5Kg
5K EQ -2Ω1
-
1 x 5.700W RMS
1 x 3.300W RMS
1 x 1.800W RMS
-
1 x 5.000W RMS
1 x 2.700W RMS
1 x 1.500W RMS
9,5 to 15Volts
10Hz to 15KHz
50Hz to 15KHz
10Hz to 700KHz
-
< 0,9 %
> 90 dB
0,2V
2 OHMS
3,3 to 220A
3,3 to 440A
75 x 310 x 375
5 Kg
LANÇAMENTO
3K3 EQ -1Ω1
1 x 3.900W RMS
1 x 2.400W RMS
1 x 1.500W RMS
-
1 x 3.300W RMS
1 x 2.000W RMS
1 x 1.200W RMS
-
9,5 to 15Volts
10Hz to 15KHz
50Hz to 15KHz
10Hz to 700Hz
-
-
< 0,9 %
> 90 dB
0,2V
2 OHMS
2,8 to 160A
2,8 to 320A
75 x 310 x 310
4,1Kg
NEW NEW
NEW NEW NEW
For Vulcan EQ Line Amplifiers: EQ Bass: -10dB to +10dB | EQ Mid-Bass: -10dB to +10dB | EQ Mid-High: -10dB to +10dB
Channels:
Power @ 13,8V 1 Ohm:
Power @ 13,8V 2 Ohms:
Power @ 13,8V 4 Ohms:
Power @ 13,8V 8 Ohms:
Power@ 12,6V 1 Ohm:
Power @ 12,6V 2 Ohms:
Power @ 12,6V 4 Ohms:
Power @ 12,6V 8 Ohms:
Supply Voltage:
Frequency Response:
Crossover Low Pass:
Crossover High Pass:
Subsonic Filter:
Total Harmonic Distortion:
Signal to Noise:
Minimum Input Sensitivity:
Minimum work Impedance:
Consumption /music signal(12,6v):
Consumption /bass signal(12,6v):
Dimensions mm (L x W x H):
Weight:
Channels:
Power RMS:
Power RMS:
Power RMS:
Maximum Supply Voltage:
Frequency Response:
Crossover Low Pass:
Subsonic Filter:
Total Harmonic Distortion:
Signal to Noise:
Minimum Input Sensitivity:
Input Impedance:
Minimum output impedance:
Automotive Battery / Music Signal:
Stationary battery / Music Signal:
Consumption bass signal
Maximum consumption @ 12,6V:
Dimensions (L x W x H) mm:
Weight:
1
34.500W (0,5 OHM) @ 176V
17.250W (1 OHM) @ 176V
8.620W (2 OHMS) @ 176V
200V
10Hz to 2KHz
50Hz to 2KHz
10Hz to 80 Hz
< 1%
> 90 dB
0,2V
20K OHMS
0,5 OHM - 14 Batteries - 176V
50A
100A
155A
20A
77 x 525 x 355
13,0 Kg
1
35.200W (1 OHM) @ 250V
17.600W (2 OHMS) @ 250V
8.800W (4 OHMS) @ 250V
290V
10Hz to 2KHz
50Hz to 2KHz
10Hz to 80 Hz
< 1%
> 90 dB
0,2V
20K OHMS
1 OHM - 20 Batteries - 250V
50A
100A
155A
20A
77 x 525 x 355
13,0 Kg
S35 - 1Ω1
84.900 W (0,8 OHM) @ 340V
33.960 W (2 OHMs) @ 340V
16.980 W (4 OHMs) @ 340V
390V
10 Hz to 3,5KHz
50 Hz to 3,5KHz
10Hz to 80 Hz
< 0,9%
> 90 dB
0.2 V
20K OHMS
0,8 OHM - 27 Batteries - 340V
70A
130A
1,8 to 260A
-
77 x 500 x 491
12,0 Kg
S80 - 0,8Ω1
60.370 W (0,5 OHM) @ 226V
30.190 W ( 1 OHM ) @ 226V
15.090 W ( 2 OHMs ) @ 226V
260V
10 Hz to 3,5KHz
50 Hz to 3,5KHz
10Hz a 80 Hz
< 0,9%
> 90 dB
0.2 V
20K OHMS
0,5 OHM - 18 Baterias - 226V
70A
130A
1,8 to 260A
-
77 x 500 x 491
12,0 Kg
Channels:
Power RMS:
Power RMS:
Power RMS:
Maximum Supply Voltage:
Frequency Response:
Crossover Low Pass:
Subsonic Filter:
Total Harmonic Distortion:
Signal to Noise:
Minimum Input Sensitivity:
Input Impedance:
Minimum output impedance:
Automotive Battery / Music Signal:
Stationary battery / Music Signal:
Consumption bass signal
Maximum consumption @ 12,6V:
Dimensions (L x W x H) mm:
Weight:
HIGH VOLTAGE
DANGER SPECIALISTS ONLY
1
15.000W (1 OHM) @ 151V
7.200W (2 OHMS) @ 151V
3.600W (4 OHMS) @ 151V
151V
10Hz a 8KHz
50Hz a 8KHz
20Hz a 80Hz
< 1%
> 90 dB
0,2V
20K OHMS
1 OHM - 12 Baterias - 151V
25A
50A
105A
20A
77 x 422 x 390
7,2 Kg
S151
25.000W (2 OHMS) @ 290V
12.100W (4 OHMS) @ 290V
6.100W (8 OHMS) @ 290V
290V
10Hz a 10KHz
50Hz a 10KHz
10Hz a 80Hz
< 1%
> 90 dB
0,2V
20K OHMS
2 OHM - 23 Baterias - 290V
25A
45A
90A
2,5A
77 x 422 x 435
8,8 Kg
S25 300V
0,5Ω 0,5Ω
CROSSOVERTotal control for your audio!
NEW DESIGN
Frequency LockedSTX 82
STX64 STX84 STX104STX62High Way:
Mid High Way:
Mid Way:
Mid Low Way:
Low Way:
Max Output Voltage:Max Input Voltage: Signal to Noise:Input Impedance:Total Harmonic Distortion:Channel Separation:Frequency Response:Charging:Current Consumption:Output Impedance:Dimensions (L x W x H) mm: Weight:
High Pass 4KHz / 2KHz / 1,2KHz / 900Hz (12 dB/8ª) PHASE0º or 180º----High Pass250Hz / 150Hz / 80Hz / FLAT (12 dB/8ª)Low Pass4KHz / 2KHz / 1,2KHz / FLAT (12 dB/8ª)----Low Pass250Hz / 150Hz / 80Hz / FLAT (12 dB/8ª)Subsonic Filter20Hz / 30Hz / 40Hz / FLAT (24 dB/8ª)PHASE0º and 180º (20Hz to 200Hz)Bass Boost(25Hz to 110Hz) (0 to +12dB; 60Hz)9V RMS4V RMS>90dB10K OHMS< 0,02% THD> 80dB20Hz to 200KHz10V to 16V DC0,25A50 OHMS33 x 160 x 236700g
High Pass 400Hz to 10KHz (12 dB/8ª)-- High Pass 150Hz to 5KHz (12 dB/8ª)Low Pass700Hz to 12,5KHz (12 dB/8ª)---- High Pass 25Hz to 3KHz (12 dB/8ª)Low Pass300Hz to 10KHz (12 dB/8ª)Low Pass50Hz to 250Hz (12 dB/8ª)----Bass Boost(25Hz to 110Hz) (0 to +12dB; 60Hz)9V RMS4V RMS>90dB10K OHMS< 0,02% THD> 80dB20Hz to 200KHz10V to 16V DC0,20A470 OHMS 33 x 160 x 225660g
High Pass400Hz to 10KHz (12 dB/8ª) PHASE 0º or 180º High Pass 150Hz to 5KHz (12 dB/8ª)Low Pass700Hz to 12,5KHz (12 dB/8ª)----High Pass70Hz to 3KHz (12 dB/8ª)Low Pass300Hz to 10KHz (12 dB/8ª)Low Pass50Hz to 250Hz (12 dB/8ª)Subsonic Filter20Hz / 30Hz / 50Hz / 80Hz (24 dB/8ª)PHASE0º and 180º (20Hz a 200Hz)Bass Boost(25Hz to 110Hz) (0 to +12dB; 60Hz)9V RMS4V RMS>90dB10K OHMS< 0,02% THD> 80dB20Hz to 200KHz10V to 16V DC0,25A50 OHMS 33 x 160 x 264780g
High Pass500Hz to 5KHz (12 dB/8ª) --------------Low Pass500Hz to 5KHz (12 dB/8ª)Subsonic Filter30Hz / 40Hz / 50Hz / 60Hz (24 dB/8ª)--Bass Boost(25Hz to 110Hz) (0 to +12dB; 60Hz)9V RMS4V RMS>90dB10K OHMS< 0,02% THD> 80dB20Hz to 200KHz10V to 16V DC0,15A50 OHMS 33 x 160 x 175520g
STX82 Frequency LockedFc1: Fc2:Fc3:Subsonic Filter:
Bass Boost:Max Output Voltage:Max Input Voltage: Signal to Noise:Input Impedance:Total Harmonic Distortion:Channel Separation:Frequency Response:Charging:Current Consumption:Output Impedance:Dimensions (L x W x H) mm: Weight:
Fc1 Fc2 Fc3
The STX 82 Frequency Locked has synced variable filters that eliminate audio cancellation and superposition in the frequency cutoff. Each of the three cutoff
adjusters (Fc1, Fc2 and Fc3) also functions as an LPF (Low Pass Filter) for the channel to its left and an HPF (High Pass Filter) for the channel to its right.
STX82 FREQUENCY RESPONSE
MARKET LEADER
The STX2496 is a digital sound processor that offers an enormous range of precision adjustments and configurations to improve your sound system’s performance. It is composed of two DSP’s (Digital Sound Processors) that provide real-time equalizing, filtering,
balancing, gain, phase inversion, limiting, and digital output and input routing among other treatments. The STX2496 has a bright OLED display that allows a wide viewing angle and provides a dynamic, intuitive interface.
STX2496PROCESSOR Surprise Yourself!
NEW RELEASE
Processing the output and input
15-band graphic equalizer
The STX2496 has two inputs with a 15-band, independent gain graphic equalizer.
High precision Linkwitz-Riley crossover
5-band parametric equalizer
Limiter with Attack, Release, Actuator Indicator, Phase Invert, high-precision Balance/Delay, in addition to Independent Gain, Mute and Master Volume.
Allows users to save and load their own adjustments
Password-enabled block of parameter editing
Other functions such as naming outputs, screen saver and screen brightness adjustments.
AUDIO PROCESSING
15-BAND GRAPHIC EQUALIZER
Precision settings for the cutoff frequencies and attenuations
Select the audio source
CROSSOVER
INPUT AND OUTPUT ROUTER
Resolve frequency-canceling problems
PHASE
Protects your amplifiers and loudspeakers via the Limiter function
LIMITER
Easy Navigation and Control via the “ENCODER” dial and “HOTKEYS” shortcuts
NAVIGATION and CONTROL
LOW MID LOW MID HIGH HIGH
20Hz to 150Hz 250Hz to 2,6KHz4KHz to 20KHz 35Hz / 50Hz / 65Hz /80Hz(24dB/8° in Low Way and 36dB/8° in MID LOW Way)0dB to +6dB on 60Hz - (Operates 10Hz to 140Hz) 9V RMS4V RMS>90dB13K OHMS< 0,02% THD> 80dB10Hz to 35KHz10V to 16V DC180 mA50 OHMS34 x 119 x 208460g
Input Gain:
Output Gain:
Graphic Equalizer
Parametric Equalizer
Crossover:
Limiter:
Max Input Voltage:
Max Output Voltage:
Phase:
Delay:
Input Impedance:
Output Impedance:
Signal to Noise:
Total Harmonic Distortion:
Channel Separation:
Frequency Response:
Charging:
Current Consumption:
Dimensions (L x W x H) mm:
Weight:
-45 to +15 dB
-45 to +15 dB
15 Bandas, ISO 2/3 Oct, Ganho +- 12 dB
5 Bands per Output, Gaain +- 12 dB, Factor Q 0,4 to 10,0
Linkwitz-Riley 12/24/36/48 dB/Oct, Passo Dinâmico
Threshold -24 to 0 dB; Attack 1 to 200 ms;
Release 380 to 620 ms
4 VRMS (+14 dBu)
4 VRMS (+14 dBu)
0° or 180°
0 to 8 ms (275 cm)
14K OHMS
470 OHMS
>90 dB
<0,01%
>80 dB
10 Hz to 22 kHz
10V to 15V DC
500 mA @ 12,6V
37 x 204 x 151mm
560g
NEW
RCA ADAPTER
ST6000
SILVER RCA CABLESHighly flexible cables
High Pressure RCA connectors
Highly flexible cables
High Pressure RCA connectors - GOLD plated
Highly flexible cables
High Pressure RCA connectors - GOLD plated
5M Cable / 3M Cable / 1M Cable /
5M Cable / 3M Cable / 1M Cable
1M Cable3M/5M Cable
Y1F Cable 1M CableY2F Cable 3M/5M Cable
REMOTEWITH AUTOMATIC REMOTE
RCA CABLESGOLD
MIXER
RCA Output: 1 Vrms / 1K ohms (Mono)8 ohms Output: 3 Vrms / 8K ohms (Mono)Distortion: 0,1% THD+NSignal to Noise: > 70dBConsumption: 0,08A to 0,5A
INPUTS:Dynamic Microphone Sensibility: 3mVolts RMS / 600 OhmsAuxiliary Sensibilidade: 3mVolts RMS / 600 OhmsUSB Memory: Pendrive FAT16 / FAT32 Formato: MP3 / MP3 PRO / WMA Data Rate: 32Kbps to 384 Kbps
MA 1200 MA 1300MA 1300OUTPUT:RCA Output: 1 Volt RMS / 1K Ohms (Mono)8 Ohms Output: 3 Volt RMS / 8 Ohms (Mono)Distortion 0,1% THDSignal to Noise: > 70dB FEATURES:Consumption: 80mA to 500 mAEqualization: Bass ± 12 dB - 100 Hz Treble ± 12 dB - 10 KHzSuply VOltage: 12,0 to 14,4 VoltsFrequency Response: 20 Hz to 35 KHzDimensions (L x W x H): 41 x 175 x 134 mm Weight: 0,650 Kg
INPUT
Equalization: Bass ± 12 dB - 100 Hz Treble ± 12 dB - 10 KHzSupply Voltage: 13,8VFrequency Response: 20 Hz to 35 KHzDimensions (L x W x H): 4,3 x 17,5 x 10,0cm Weight: 0,412 Kg
CHV 500
POWER SUPPLYAND CHARGER
FC-75
Consumption: 50 mA
Standby Consumption: 11 mA
Output Current Remote Out: 500mA
Dimensions (L x W x H): 75 x 110 x 35 mm
Weight: 90 g
Consumption: 20mA
Standby Consumption: 4 mA
-
Dimensions (L x W x H): 75 x 110 x 35 mm
Weight: 90 g
Consumption: 50mA
Standby Consumption: 4 mA
-
Dimensions (L x W x H): 75 x 110 x 35 mm
Weight: 90 g
VT 3 VT 4 VT 5Voltage Range:7 to 25,5 Volts
Low Voltage Range:0 to 30 Volts High Voltage Range:0 to 500 Volts
Low Voltage Range:0 to 30 Volts High Voltage Range:0 to 390 Volts
Manager and Voltmeter
RECOMMENDED USE WITH CHV500RECOMMENDED USE WITH HIGH VOLTAGE LINE
NEW
PROTECTION
Internal fuse AC input
Short Output DC
IN-RUSH (damping of inrush current)
Low and High Voltage AC
High temperature> 100 ° C
TECHNICAL SPECIFICATIONS
Operating voltage DC: 7,5V to 14,4V
Operating voltage AC: 127V (95V to 140V) / 220V (165V to 240V)
Current DC: 0 to 75A
Max Consumption: AC: 10A (127V AC) and 5,6A (220V AC)
Dimensions: (L x W x H) 75 x 310 x 220 mm
Weight: 3,30 kg
RECOMMENDED FOR USE WITH VT-5
PROTECTION
Internal fuse AC input
Reverse polarity on output
TECHNICAL SPECIFICATIONS
Operating load:
Up to 17 batteries at 127V AC and
10-27 batteries at 220V AC
Maximum Output Current: 4,5A (220V AC)
Operating voltage AC AC:
127V and 220V
AC Consumption: 5,7A (127V AC) and 9,9A (220V AC)
Dimensions: (L x W x H) 46 X 110 x 197 mm
Weight: 0,840 Kg.
VT 5RECOMMENDED USE WITH CHV500
Manager and Voltmeter
Low Voltage Range:0 to 30 Volts High Voltage Range:0 to 390 Volts
DIGITAL VOLTMETERYour system security!
TECHNICAL ASSISTANCEand STETSOM WARRANTY- Agile and differentiated customer service.- Technical assistance Network with authorized positions throughout Brazil and abroad.- Warranty of one (1) year for all products.- Technical expertise to provide support to installers and customers.
Questions about our products, contact: [email protected]
Go to the nearest authorized also the site www.stetsom.com.br/en/assistencias-tecnica
More than 45 countries,on 5 continents.Present in the world and making the difference!
RELIABILITY & QUALITY
YEAR
RELIABILITY & QUALITY