Catalog Thera
-
Upload
trajumaselectric -
Category
Documents
-
view
3.037 -
download
299
description
Transcript of Catalog Thera
Copyright © by thera 01/2009, Subject to change without prior notice
Page
Introductions DIN-rail Mounted
Single Phase Single Tariff DIN-rail Active Energy Meter TEMO15 – C Series , Register Counter Single Phase Single Tariff DIN-rail Active Energy Meter TEMO15s – C Series, LCD Display 03-04
Front Board Mounted
Power Analyzer (Power Meter) LCD Multifunction Network Power Monitor TPM230D – Build in MODBUS RTU Comm. Protocol
Electronic Active Energy Meter
thera Power & Electricity Meter
Catalog 2009
Single Phase Single Tariff DIN-rail Active Energy Meter TEMO15 – D Series, Register Counter 05-06 Single Phase Single Tariff DIN-rail Active Energy Meter TEMO11 – C Series, Register Counter 07-08 Single Phase Single Tariff DIN-rail Active Energy Meter TEMO11 – D Series, LCD Display 09-10 Single Phase Double Tariff DIN-rail Active Energy Meter TEMO31 – D Series, LCD Display 11-12 Single Phase Modbus RTU, DIN-rail Active Energy Meter TEMO35 – D Series, LCD Display 13-14 Three Phase, Single Tariff DIN-rail Active Energy Meter TEMO21 – C Series, Register Counter 15-16 Three Phase Single Tariff DIN-rail Active Energy Meter TEMO21 – D Series, LCD Display 17-18 Three Phase Double Tariff DIN-rail Active Energy Meter TEMO41 – D Series, LCD Display 19-20 Three Phase Modbus RTU, DIN-rail Active Energy Meter TEMO45 – D Series, LCD Display 21-22
Single Phase Single Tariff Front Board Active Energy Meter TEMO16 – C Series, Register Counter 25-26
Single Phase Single Tariff Front Board Active Energy Meter TEMO12 – D Series, LCD Display
27-28
Three Phase Single Tariff Front Board Active Energy Meter TEMO22 – D Series, LCD Display
29-30 Three Phase Double Tariff Front Board Active Energy Meter TEMO42 – D Series, LCD Display 31-32
Three Phase Prepayment Front Board Active Energy Meter TEMO91 – D/L Series, LED/LCD Display
33-34
Three Phase Prepayment Front Board Active Energy Meter TEM1O1 – D Series, LCD Display
35-36
Three Phase Multifunction, Modbus RTU, Active Energy Meter TEMO65 – D Series, LCD Display 23-24
Billing System Networks Software Billing System (Therasoft Eco), Module Concentrator (TMEX_ 16DI Series, and Converter 37-42
43-44
01-02
Contents
Please contact to: PT Trajumas Electric Telp: (021) 6828-4820 Fax : (021) 8563-739 www.trajumaselectric.co.cc
For more detail information
TEMO15-C
Single Phase Electronic Active Energy Meter
Model TEM015-C single phase electronic DIN rail active energy meter is a kind of new style single phase two wire active energy meter, I t adopt micro-electronics technique, and imported large scale integrate circuit, use advanced technique of digital and SMT techniques, etc. I t has its completely independent intellectual property rights and minimum size. It has already passed the test of the international authority KEMA. The meter completely accord with relevant technical requirements of class 1 single phase active energy meter stipulated in international standard IEC 62053-21. It can accurate and directly measure 50Hz or 60Hz active energy consumption from single phase AC electricity net, it can display total energy consumption by step motor type impulse register.
• 35mm standard DIN rail installation, complying with standard DIN EN50022.
• Single pole width (Modulus 17.5mm), complying with standard DIN43880.
• Standard configuration 6+1 digits display (999999.1kWh) by step motor type impulse register.
• Standard configuration pulse output passive (polarity), May select distant pulse output passive (non polarity). And contact with all kind of AMR system conveniently, Complying with standard IEC 62053-31 and DIN 43864.
• Bicolor LED instructions power supply state (green) and signal of energy impulse (red).
• Automatic detection the direction of the flow of load current. And instructions (Only red energy impulse signal when working ,If no green instructions power supply, that is meaning the direction of the flow of load current reverse).
• Single direction measurement single phase two wire active power consumption. It is nothing with direction of the trend of load current. Complying with standard IEC
TEM015-C Series
thera Power & Electricity Meter
Introductions Features
General Functions
Copyright © by thera 01/2009, Subject to change without prior notice
Page
1 Catalog thera , 01/2009
®
DIN rail mounting Wide rage current measurement SO output Easy installation One modules (1DIN Module)
Accuracy Class 1.0
Light Weight & Good reliability
Application
Residential Shopping Center or Mall Apartment and Office Building Industries and Factory
Applications Network
Modbus RS485
Serial Converter USB/RS232/Ethernet to RS485
PC (PC Reader Meter)
Pulse Concentrator TMEX-16DI
TEM
015-
C
Convenient installation for any application as stand alone me-ter or for any meters use with Pulse Concentrator application:
TEM
015-
C
TEM
015-
C
Technical Specification: Model TEM015-C Connecting Mode Direct Connections
Accuracy Class Class 1.0
Reference Voltage (Un) 230V AC
Network 1 phase 2 wire
Operating Voltage 0.7 ~ 1.3 Un
AC Voltage withstand 2 KV for 1 minute
Impulse Voltage 6kV-1.2/50μS waveform
Rate Current (Ib) 5A,
Maximum Rates Current (Imax) 30A
Operating Current Range 0.2%Ib ~ Imax
Operating Frequency Range 50 Hz + 10% Internal Power Consumption <2W/10VA Operating Humidity Range <75%
Storage Humidity Range <95%
Operating Temperature Range -150 C ~ + 500 C
Storage Temperature Range -300 C ~ + 700 C
Pulse Output rate (meter constant) 2000 imp/kWh
Communication Pulse Output (Open Collector), Suitable to connect to BAS System
Display 6+1 Digits, Register Counter Display
Authority International Standard IEC / EN 62053-21, and DIN EN520022
Overall Dimensions (W x H x D) W: 18 mm x H: 90 mm x D: 58.5 mm ( 1 DIN Module)
thera ®
Power & Electricity Meters Page
2 Catalog thera , 01/2009
* if you need different voltage or current specifications, please advisory our sales
Type / Order No. Rate Voltage (V) Rate Current (Ib / Imax ) A
Operating Current Range (A)
TEM015 - C4240 230 5(30) 0.2%Ib ~ Imax
Ordering code
Copyright © by thera 01/2009, Subject to change without prior notice
Overall Dimension
1
3
L-IN
L-OUT
4
6
20
21
N
N
+
SO
-
Installation
TEMO15S-C
Single-phase Electronic Energy Meter
Model TEM015S-C single phase electronic DIN rail active energy meter is a kind of new style single phase two wire active energy meter, it adopt micro-electronics technique, and imported large scale integrate circuit, use advanced technique of digital and SMT techniques, etc. It has its completely independent intellectual property rights and minimum size. It has already passed the test of the interna-tional. The meter completely accord with relevant technical requirements of class 1 single phase active energy meter stipulated in international standard IEC 62053-21. It can accurate and directly measure 50Hz or 60Hz active energy consumption from single phase AC electricity net, it can display total energy consumption by step motor type impulse
• 35mm standard DIN rail installation, complying with stan-dard DIN EN50022.
● Pole 1.5 width (Modulus 17.5mm), complying with stan-dard DIN43880.
● Standard configuration 6+1 digits display (999999.1kWh) by step motor type impulse register.
● Standard configuration pulse output passive (polarity), May select distant pulse output passive (non polarity). And contact with all kind of AMR system conveniently, Complying with standard IEC 62053-31 and DIN 43864.
● Two LED instructions power supply state (green) and signal of energy impulse (red).
● Automatic detection the direction of the flow of load current. And Instructions (Only red energy impulse signal when working, that is meaning the direction of the flow of load current reverse).
● Single direction measurement single phase two wire active power consumption. It is nothing with direction of the trend of load current. Complying with standard IEC 62053-21.
● Directly connect and use ● Extension terminals cover, in order to protect to use safety.
TEM015S-C Series
DIN rail mounting
Wide rage current measurement
Pulse output (Open Collector)
thera Power & Electricity Meter
Applications Features
General Functions
Easy installation
One modules (1.5 DIN Module)
Copyright © by thera 01/2009, Subject to change without prior notice
Page
3 Catalog thera , 01/2009
Accuracy Class 1.0
®
Light Weight & Good reliability
Applications Network
Modbus RS485
Serial Converter USB/RS232/Ethernet to RS485
PC (PC Reader Meter) TEM
015s
Pulse Concentrator TMEX-16DI
TEM
015s
TEM
015s
Convenient installation for any application as stand alone me-ter or for any meters use with Pulse Concentrator application:
Technical Specification: Model TEM015S-C Connecting Mode Direct Connections
Accuracy Class Class 1.0
Reference Voltage (Un) 230V AC
Network 1 phase 2 wire
Operating Voltage 0.7 ~ 1.3 Un
AC Voltage withstand 2 KV for 1 minute
Impulse Voltage 6kV-1.2/50μS waveform
Rate Current (Ib) 10A,
Maximum Rates Current (Imax) 63A
Operating Current Range 0.2%Ib ~ Imax
Operating Frequency Range 50 Hz + 10% Internal Power Consumption <2W/10VA per phase Operating Humidity Range <75%
Storage Humidity Range <95%
Operating Temperature Range -150 C ~ + 500 C
Storage Temperature Range -300 C ~ + 700 C
Pulse Output rate (meter constant) 1000 imp/kWh
Communication Pulse Output (Open Collector), Suitable to connect to BAS System
Display 6+1 Digits Register Counter
Authority International Standard IEC/EN 62053-21, DIN EN50022
Overall Dimensions (W x H x D) W: 26 mm x H: 90 mm x D: 58.5 mm( 1.5DIN, Module 17.5mm)
thera ®
Power & Electricity Meters Page
4 Catalog thera , 01/2009
* if you need different voltage or current specifications, please advisory our sales
Type / Order No. Rate Voltage (V) Rate Current (Ib / Imax ) A
Operating Current Range (A)
TEM015S - CB250 230 10(63) 0.2%Ib ~ Imax
Ordering code
Copyright © by thera 01/2009, Subject to change without prior notice
Overall Dimension
Installation
Single Phase Electronic Active Energy Meter With Backlight LCD Display
Model TEM015-D backlight single phase electronic DIN rail active energy meter adopt micro-electronics technique, and imported large scale integrate circuit, use advanced technique of digital and SMT techniques, etc. It has its completely independent intellectual property rights and minimum size. The meter completely accord with relevant technical require ments of class 1 single phase active energy meter stipulated in international standard IEC 62053-21. It can accurately and directly measure 50Hz or 60Hz active energy consump tion from single phase AC electricity net. This meter has green backlight source eight digits LCD displays shows the active energy consumption.It has following features:good reliability, small volume, light weight, specious nice appearance, convenient installation, etc
• 35mm standard DIN rail installation, complying with standard DIN EN50022.
• Single pole width (Modulus 17.5mm), complying with standard DIN43880.
• It displays by Green backlight source eight digits LCD, users can choose setting 6+1 digits display.
• There is a maintenance-free lithium batteries in it, with a button and an ECP port., it use for displaying power cut reading, self-checking function and display the median choice.
• Users can cleared the total electricity counter, clearing operation with function of ECP and eight password double protection, users can set the password arbitrary.
• Standard configuration pulse output passive (polarity), May select distant pulse output passive (non polarity). And contact with all kind of AMR system conveniently, complying with standard IEC 62053-31 and DIN 43864.
• Automatic detection the direction of the flow of load current. And instructions on LCD (when display HELP 1 on LCD, that is meaning the direction of the flow of load current reverse).
TEM015-D Series
DIN rail mounting Wide rage current measurement SO output
thera Power & Electricity Meter
Introductions Features
General Functions
Easy installation One modules (1DIN Module)
Copyright © by thera 01/2009, Subject to change without prior notice
Page
5 Catalog thera , 01/2009
Accuracy Class 1.0
®
Light Weight & Good reliability
Network
2-Wire RS485 Net
Serial Converter USB/RS232/Ethernet to
PC (Personal Computer) TEMO15D TEMO15D
Pulse Concentrator
Tmex-16DI
Application
Residential Shopping Center or Mall Apartment and Office Building Industries and Factory
TEMO15-D
Technical Specification: Model TEM015-D Connecting Mode Direct Connections
Accuracy Class Class 1.0
Reference Voltage (Un) 230V AC
Network 1 phase 2 wire
Operating Voltage 0.7 ~ 1.3 Un
AC Voltage withstand 2 KV for 1 minute
Impulse Voltage 6kV-1.2/50μS waveform
Rate Current (Ib) 5A,
Maximum Rates Current (Imax) 30A
Operating Current Range 0.2%Ib ~ Imax
Operating Frequency Range 50 Hz + 10% Internal Power Consumption <2W/10VA Operating Humidity Range <75%
Storage Humidity Range <95%
Operating Temperature Range -150 C ~ + 500 C
Storage Temperature Range -300 C ~ + 700 C
Pulse Output rate (meter constant) 1000 imp/kWh
Communication Pulse Output (Open Collector), Suitable to connect to BAS System
Display 6+1 Digits Register Counter
Authority International Standard IEC61036, DIN EN50022
Overall Dimensions (W x H x D) W: 18 mm x H: 90 mm x D: 58.5 mm ( 1 DIN Module)
thera ®
Power & Electricity Meters Page
6 Catalog thera , 01/2009
* if you need different voltage or current specifications, please advisory our sales
Type / Order No. Rate Voltage (V) Rate Current (Ib / Imax ) A
Operating Current Range (A)
TEM015 - D4240 230 5(30) 0.2%Ib ~ Imax
Ordering code
Copyright © by thera 01/2009, Subject to change without prior notice
Overall Dimension
Installation
TEMO11-C
Single-phase Electronic Energy Meter
Model TEM011-C single phase electronic DIN rail active energy meter is a kind of new style single phase two wire active en-ergy meter, it adopt micro-electronics technique, and im-ported large scale integrate circuit, use advanced technique of digital and SMT techniques, etc. The meter completely accord with relevant technical requirements of class 1 single phase active energy meter stipulated in international standard IEC 62053-21. It can accurate and directly measure 50Hz or 60Hz active energy consumption from single phase AC electricity net, it can display total energy consumption by step motor type impulse register. It has following features: good reliabil-ity, small volume, light weight, specious nice appearance, convenient installation.
• 35mm standard DIN rail installation, complying with stan-dard DIN EN50022. Or front board setting (mounting holes center distance 63 mm), users can choose any one by themselves.
• Six pole width (Modulus 12.5mm), complying with stan-dard JB/T7121-1993.
• Standard configuration 5+1 digits display (99999.1kWh) by step motor and pulse machinery counter. May select 6+1 digits display (Product Configuration code is AK). Standard configuration one port of pulse output passive (polarity), May select increase a distant port of pulse out-put passive (no polarity), (Product Configuration code is AI). And contact with all kind of AMR system conveniently, complying with standard IEC 62053-31 and DIN 43864.
• Bicolor LED instructions power state (green) and signal of power impulse (red).
• Standard configuration don’t detect direction of the trend of load current. May select Automatic Detecting the direc-tion of the trend of load current. And instructions (Only red power pulse signal when working, that is meaning the load current reverse).
TEM011-C Series
DIN rail mounting
Wide rage current measurement
SO output
thera Power & Electricity Meter
Applications Features
General Functions
Easy installation
Four modules (4DIN Module)
Copyright © by thera 01/2009, Subject to change without prior notice
Page
7 Catalog thera , 01/2009
Accuracy Class 1.0
®
Light Weight & Good reliability
Applications Network
Modbus RS485
Serial Converter USB/RS232/Ethernet to RS485
PC (PC Reader Meter)
Pulse Concentrator TMEX-16DI
TEM011 TEM011 TEM011
Convenient installation for any application as stand alone me-ter or for any meters use with Pulse Concentrator application:
Technical Specification: Model TEM011-C Connecting Mode Direct Connections
Accuracy Class Class 1.0
Reference Voltage (Un) 230V AC
Network 1 phase 2 wire
Operating Voltage 0.7 ~ 1.3 Un
AC Voltage withstand 2 KV for 1 minute
Impulse Voltage 6kV-1.2/50μS waveform
Rate Current (Ib) 5A, 10A, 20A
Maximum Rates Current (Imax) 30A, 65A, 100A
Operating Current Range 0.04%Ib ~ Imax
Operating Frequency Range 50 Hz + 10% Internal Power Consumption <2W/10VA per phase Operating Humidity Range <75%
Storage Humidity Range <95%
Operating Temperature Range -150 C ~ + 500 C
Storage Temperature Range -300 C ~ + 700 C
Pulse Output rate (meter constant) 3200, 1600, 800 imp/kWh
Communication Pulse Output (Open Collector), Suitable to connect to BAS System
Display 5+1 Digits Register Counter
Authority International Standard IEC61036, DIN EN50022
Overall Dimensions (W x H x D) W: 75 mm x H: 88 mm x D: 73 mm ( 4 DIN Module)
thera ®
Power & Electricity Meters Page
8 Catalog thera , 01/2009
* if you need different voltage or current specifications, please advisory our sales
Type / Order No. Rate Voltage (V) Rate Current (Ib / Imax ) A
Operating Current Range (A)
TEM015 - CE210 230 20(100) 0.04%Ib ~ Imax TEM015 - CA220 230 10(65)A 0.04%Ib ~ Imax TEM011 - C4230 230 5(30)A 0.04%Ib ~ Imax
Ordering code
Copyright © by thera 01/2009, Subject to change without prior notice
Overall Dimension
Installation
TEMO11- D
Single Phase Electronic Active Energy Meter
Model TEM011-D single phase electronic DIN rail active energy meter is a kind of new style single phase two wire active energy meter, it adopt micro-electronics technique, and imported large scale integrate circuit, use advanced technique of digital and SMT techniques, etc. The meter completely accord with relevant technical requirements of class 1 single phase active energy meter stipulated in international standard IEC 62053-21. It can accurate and directly measure 50Hz or 60Hz active energy consumption from single phase AC electricity net. This meter has seven digits LCD displays shows the active energy consumption. It has following features: good reliability, small volume, light weight, specious nice appearance, convenient installation, etc.
• 35mm standard DIN rail installation, complying with standard DIN EN50022.
• Six pole width (Modulus 12.5mm).
• Standard configuration 6+1 digits LCD display.
• Standard configuration Impulse output passive (polarity), May select distant impulse output passive (no polarity). And contact with all kind of AMR system conveniently, complying with standard IEC 62053-31 and DIN 43864.
• Two LED instructions respectively power supply state (green) and signal of energy impulse (red).
• Standard configuration don’t detection direction of the flow of load current. May select automatic detection the direction of the flow of load current. And instructions by an individual LED.
• Single direction measure single phase two wire active energy consumption. It is nothing with direction of the flow of load current. Complying with standard IEC 62053-21
TEM011-D Series
thera Power & Electricity Meter
Introductions
General Functions
Copyright © by thera 01/2009, Subject to change without prior notice
Page
9 Catalog thera , 01/2009
®
Features
DIN rail mounting Wide rage current measurement SO output & RS485 (optional) Easy installation Four modules (4DIN Module)
Accuracy Class 1.0
Light Weight & Good reliability
Application
Residential Shopping Center or Mall Apartment and Office Building Industries and Factory
Applications Network
Modbus RS485
Serial Converter USB/RS232/Ethernet to RS485
PC (PC Reader Meter)
Pulse Concentrator TMEX-16DI
TEM011D TEM011D TEM011D
Convenient installation for any application as stand alone me-ter or for any meters use with Pulse Concentrator application:
Technical Specification: Model TEM011-D Connecting Mode Direct Connections
Accuracy Class Class 1.0
Reference Voltage (Un) 230V AC
Network 1 phase 2 wire
Operating Voltage 0.7 ~ 1.3 Un
AC Voltage withstand 2 KV for 1 minute
Impulse Voltage 6kV-1.2/50μS waveform
Rate Current (Ib) 5A, 10A, 20A
Maximum Rates Current (Imax) 30A, 65A, 100A
Operating Current Range 0.04%Ib ~ Imax
Operating Frequency Range 50 Hz + 10% Internal Power Consumption <2W/10VA Operating Humidity Range <75%
Storage Humidity Range <95%
Operating Temperature Range -150 C ~ + 500 C
Storage Temperature Range -300 C ~ + 700 C
Pulse Output rate (meter constant) 3200, 1600, 800 imp/kWh
Communication Pulse Output (Open Collector), & RS485 port (optional)
Display 6+1 Digits LCD Display
Authority International Standard IEC61036, DIN EN50022
Overall Dimensions (W x H x D) W: 75 mm x H: 88 mm x D: 73 mm ( 4 DIN Module)
thera ®
Power & Electricity Meters Page
10 Catalog thera , 01/2009
* if you need different voltage or current specifications, please advisory our sales
Type / Order No. Rate Voltage (V) Rate Current (Ib / Imax ) A
Operating Current Range (A)
TEM011 - DE210 230 20(100) 0.04%Ib ~ Imax TEM011 - DA220/D7220 230 10(65)A 0.04%Ib ~ Imax TEM011 - D4230 230 5(30)A 0.04%Ib ~ Imax
Ordering code
Copyright © by thera 01/2009, Subject to change without prior notice
Overall Dimension
Installation
TEMO31- D
Single-phase Electronic Energy Meter Multi-rate (Double Tariff)
Model TEM031-D single phase electronic multi-rate DIN rail active energy meter is a kind of single phase two wire three tariffs (time-sharing billing) active energy meter, the meter completely accord with relevant technical requirements of class 1 single phase active energy meter stipulated in interna-tional standard IEC 62053-21. It can accurate and directly measure 50Hz or 60Hz active energy consumption from single phase AC electricity net. This meter has seven digits LCD dis-plays shows various consumption data and information. And there are far infrared and RS485 communication module in it. It is use for setting and reading the meter. Contact with all kind of AMR system conveniently. It has following features: good reliability, small volume, light weight, specious nice ap-pearance, convenient installation.
• 35mm standard DIN rail installation, complying with stan-dard DIN EN50022.
• four pole width (Modulus 18.5mm).
• Have three tariffs, may select 12 daily period of times. There are a clock and Maintenance-free backup lithium batteries in it. Battery capacity detection and display all the time. It can keep the electricity data for 12 months. The data can be kept forever after blackout.
• A port of pulse output passive (polarity), complying with standard IEC 62053-31.
• There are far infrared and a port of RS485 communication data. It is use for setting and reading the meter.
• Seven LED instructions respectively power supply state, signal of energy impulse, the direction of the flow of load current, the state rates just now and the data communi-cations state.
• Single direction measure single phase two wire active energy consumption. Complying with standard IEC 62053-21
TEM031-D Series
DIN rail mounting
Wide rage current measurement
Pulse output (SO)
thera Power & Electricity Meter
Introduction Features
General Functions
Easy installation
Four modules (4DIN Module)
RS485
Serial Converter USB/RS232/Ethernet to RS485
PC (PC Reader Meter)
Temo31D Temo31D Temo31D
Copyright © by thera 01/2009, Subject to change without prior notice
Page
11Catalog thera , 01/2009
Accuracy Class 1.0
®
Light Weight & Good reliability
Network Application
Pulse Concentrator TMEX-16DI
RS485 and Infra Red port
Built-in Time Switch (settable)
Multi-rate or Double tariff
Residential Office/Commercial building Shopping Center (Mall) Multi tenant Apartment Factory & Industrial Panel Telecommunications (BTS)
Application
Convenient installation for any application as stand alone me-ter or for any meters with Pulse or RS485 network application:
Technical Specification: Model TEM031-D Connecting Mode Direct Connections
Accuracy Class Class 1.0
Reference Voltage (Un) 230V AC
Network 1 phase 2 wire
Operating Voltage 0.7 ~ 1.3 Un
AC Voltage withstand 2 KV for 1 minute
Impulse Voltage 6kV-1.2/50μS waveform
Rate Current (Ib) 5A, 10A, 20A
Maximum Rates Current (Imax) 30A, 65A, 100A
Operating Current Range 0.04%Ib ~ Imax
Operating Frequency Range 50 Hz + 10% Internal Power Consumption <2W/10VA per phase Operating Humidity Range <75%
Storage Humidity Range <95%
Operating Temperature Range -150 C ~ + 500 C
Storage Temperature Range -300 C ~ + 700 C
Pulse Output rate (meter constant) 3200, 1600, 800 imp/kWh
Output Pulse Output (Open Collector), Suitable to connect to BAS System
Display 6+1 Digits LCD Display
Authority International Standard IEC61036, DIN EN50022
Overall Dimensions (W x H x D) W: 75 mm x H: 88 mm x D: 73 mm ( 4 DIN Module)
Communication Port RS485 Modbus communications + Infra RED Port
thera ®
Power & Electricity Meters Page
12 Catalog thera , 01/2009
* if you need different voltage or current specifications, please advisory our sales
Type / Order No. Rate Voltage (V) Rate Current (Ib / Imax ) A
Operating Current Range (A)
TEM031 - DE213 230 20(100) 0.04%Ib ~ Imax TEM031 - DA223 230 10(65)A 0.04%Ib ~ Imax TEM031 - D4233 230 5(30)A 0.04%Ib ~ Imax
Ordering code
Copyright © by thera 01/2009, Subject to change without prior notice
Overall Dimension
Installation
TEMO35-D
Single-phase Electronic Energy Meter With Modbus RTU Communication Output ( Port RS485 )
New
New TEMO35-D Series is a DIN rail single phase two wire electronic energy meter with modbus communi-cation protocol. The total energy consumption is show-ing via 6+1 (7 digit) LCD displayed based on kWh and the data can be readable by isolated RS485 port also for other value measured data on internal modbus register memory can be readable from RS485 as for V, A, Hz, Cos Pi and VA. The meter is provided with a non-volatile memory system that ensures that the readings are not lost or altered when power off. With Modbus RTU protocol these meter configured as a slaves meter and will be easy to remote communication with other Modbus Master such BAS/AMR/SCADA or PLC to collect the active energy consumption data from dis-tance.
We have introduced a large scale of energy meters on the market suitable for 220/230V AC to 300V AC (50 or 60Hz). Although we produce the thera TEMO35D energy meter according to IEC / EN62053-21 and our quality inspection is very accurate. With wide range current measuring rated 10(100)A direct measuring.
TEM035-D Series
DIN-Rail mounting
Wide rage current measurement
SO (Pulse) output
RS485 MODBUS RTU communi-cation Protocol
thera Power & Electricity Meter
Introduction Feature
General Specification
Convenient installation for any application as stand alone meter or for any meters with modbus RS485 network application:
Residential Modern office/Commercial building Shopping Center (Mall) Multi tenant Apartment Factory & Industrial
Application
Easy installation
Seven modules ( 4 DIN )
2-Wire RS485 Net
Serial Converter USB/RS232/Ethernet
to RS485
PC (Modbus Master)
other Modbus device
TEMO35-D TEMO35-D TEMO35-D
Copyright © by thera 01/2009, Subject to change without prior notice
Page
13 Catalog thera , 01/2009
Accuracy Class 1.0
Easy setting on meter Via key-press:
Modbus-RS485 ID-Address device programming
Baud rate Programming
®
Technical Specification: Model TEM035-D
Connecting Mode Direct Connections Accuracy Class Class 1.0 Reference Voltage (Un) 220/230V AC
Network 1 phase 2 wire
Operating Voltage 161/300 AC
AC Voltage withstand 2 KV for 1 minute
Impulse Voltage 6kV-1.2/50μS waveform
Rate Current (Ib) 5A, 10A direct connection
Maximum Rates Current (Imax) 100A direct connection
Operating Current Range 0.4%Ib ~ Imax
Operating Frequency Range 50 Hz + 10%
Internal Power Consumption <2W/10VA
Operating Humidity Range <75%
Storage Humidity Range <95%
Operating Temperature Range -150 C ~ + 500 C
Storage Temperature Range -300 C ~ + 700 C
Pulse Output rate (meter constant) 1000 imp/kWh
CT Changing –Ratio NA
Data Communication port RS485 port with baud rate 4800,9600 bps user settable
Data Save The data can be stored more than 20 years when power off
Protocol MODBUS RTU with 16 bit CRC Address range 0-247 user settable
Display 7 Digit LCD Display ( 6 digit + 1 Decimal )
Authority International Standard IEC / EN62053-21, and DIN EN520022 Overall Dimensions (W x H x D) W: 75.50 mm x H: 88.00 mm x D: 73.08 mm (4 DIN Module)
* if you need different voltage or current specifications, please advisory our sales
Page
14
thera ®
Power & Electricity Meters
Catalog thera , 01/2009
Copyright © by thera 01/2009, Subject to change without prior notice
Ordering code Type / Order No. Rate Voltage (V) Rate Current (Ib / Imax ) A Operating Current Range (A) TEM035 - DA241 230 10(60)A 0.04%Ib ~ Imax TEM035 - DC241 230 10(100)A 0.04%Ib ~ Imax
Installation Overall Dimension
SO
485/CMbus
-
+
-
+
5
L
6
7
N
8
L
N
1
2
3
4
L/L Phase line IN/OUT N/N Neutral line IN/OUT 5 and 6 Test pulse output contract 7 and 8 Modbus RS485 communications
Height 88.00 mm Weight 75.50 mm Depth 73.08 mm
TEMO21- C
Three Phase Electronic Active Energy Meter
Model TEM021 three phase four wire electronic DIN rail active energy meter is a kind of new style three phase four wire active energy meter, it adopt micro-electronics technique, and imported large scale integrate circuit, use advanced technique of digital and SMT techniques, etc. The meter completely accord with relevant technical requirements of class 1 three phase active energy meter stipulated in international standard IEC 62053-21. It can accurate and directly measure 50Hz or 60Hz active energy consumption from three phase four wire AC electricity net. It can display total energy consumption by step motor type impulse register. It has following features: good reliability, small volume, light weight, specious nice appearance, convenient installation, etc
• 35mm standard DIN rail installation, complying with standard DIN EN50022.
• Ten pole width (Modulus 12.5mm).
• Standard configuration 6 digits display (999999kWh) by step motor type impulse register.
• There are a polarity port of pulse output passive closed and a non polarity port of pulse output passive distant, the output rate is 10 or 100 imp/kWh (can select). And contact with all kind of AMR system conveniently, Complying with standard IEC 62053-31 and DIN 43864.
• Five LED instructions respectively every power supply state and signal of closed energy impulse and distant energy impulse.
• Automatic detection the direction of the flow of load current.
• Single direction three components measure three phase four wire active energy consumption. It is nothing with direction of the flow of load current. Complying with standard IEC 62053-21.
TEM021-C Series
thera Power & Electricity Meter
Introductions
General Functions
Copyright © by thera 01/2009, Subject to change without prior notice
Page
15 Catalog thera , 01/2009
®
Features
DIN rail mounting Wide rage current measurement SO output Easy installation Seven modules (7DIN Module)
Accuracy Class 1.0
Light Weight & Good reliability
Application
Residential Shopping Center or Mall Apartment, Hotel & Office Building Industries and Factory
Applications Network
Modbus RS485
Serial Converter USB/RS232/Ethernet to RS485
PC (PC Reader Meter)
Pulse Concentrator TMEX-16DI
TEM021-C TEM021-C TEM021-C
Convenient installation for any application as stand alone me-ter or for any meters use with Pulse Concentrator application:
Technical Specification: Model TEM021-C Connecting Mode Direct Connections or CT Connections
Accuracy Class Class 1.0
Reference Voltage (Un) 3X230/400V AC (3~) Network 3 phase 4 wire
Operating Voltage 161/279-300/520V AC (3~) AC Voltage withstand 2 KV for 1 minute
Impulse Voltage 6kV-1.2/50μS waveform
Rate Current (Ib) 1.5A via CT or 5A, 10A direct connection
Maximum Rates Current (Imax) 6 A Via CT or 100A direct connection
Operating Current Range 0.2%Ib ~ Imax Via CT or 0.5%Ib ~ Imax for Direct Connections
Operating Frequency Range 50 Hz + 10% Internal Power Consumption <2W/10VA per phase Operating Humidity Range <75%
Storage Humidity Range <95%
Operating Temperature Range -150 C ~ + 500 C
Storage Temperature Range -300 C ~ + 700 C
Pulse Output rate (meter constant) 1600 imp/kWh for CT and 160 imp/kWh for direct connection
Output Pulse Output (Open Collector), Suitable to connect to BAS System
Display 5+1 Digits Register Counter Display
Authority International Standard IEC61036, DIN EN50022
Overall Dimensions (W x H x D) W: 125 mm x H: 88 mm x D: 73 mm ( 7DIN Module )
thera ®
Power & Electricity Meters Page
16 Catalog thera , 01/2009
* if you need different voltage or current specifications, please advisory our sales
Type / Order No. Rate Voltage (V) Rate Current (Ib / Imax ) A
Operating Current Range (A)
TEM021 - C8500 3x230/400 10(100) 0.04%Ib ~ Imax TEM021 - C7500 3x230/400 10(100)A 0.04%Ib ~ Imax
TEM021 - C0520 3x230/400 CT/5A 0.04%Ib ~ Imax TEM021 - C0520 3x230/400 5(100)A 0.04%Ib ~ Imax
Ordering code
Copyright © by thera 01/2009, Subject to change without prior notice
Direct Connections
Overall Dimension
Installation CT Connections
TEMO21D
Three Phase Electronic Active Energy Meter
Model TEM021-D three phase four wire electronic DIN rail ac-tive energy meter is a kind of new style three phase four wire active energy meter, it adopt micro-electronics technique, and imported large scale integrate circuit, use advanced technique of digital and SMT techniques, etc. The meter completely accord with relevant technical requirements of class 1 three phase active energy meter stipulated in international standard IEC 62053-21. It can accurate and directly measure 50Hz or 60Hz active energy consumption from three phase four wire AC electricity net. It can display total energy consumption by step motor type impulse register. It has following features: good reliability, small volume, light weight, specious nice appearance, convenient installation, etc
• 35mm standard DIN rail installation, complying with stan-dard DIN EN50022.
• Ten pole width (Modulus 12.5mm).
• Standard configuration 6 digits display (999999kWh) by step motor type impulse register.
• There are a polarity port of pulse output passive closed and a non polarity port of pulse output passive distant, the output rate is 10 or 100 imp/kWh (can select). And contact with all kind of AMR system conveniently, Complying with standard IEC 62053-31 and DIN 43864.
• Five LED instructions respectively every power supply state and signal of closed energy impulse and distant energy impulse.
• Automatic detection the direction of the flow of load current.
• Single direction three components measure three phase four wire active energy consumption. It is nothing with direction of the flow of load current. Complying with standard IEC 62053-21.
TEM021-D Series
thera Power & Electricity Meter
Introductions
General Functions
Copyright © by thera 01/2009, Subject to change without prior notice
Page
17 Catalog thera , 01/2009
®
DIN rail mounting Wide rage current measurement SO output
Features
Easy installation Seven modules (7DIN Module)
Accuracy Class 1.0
Light Weight & Good reliability
Applications
Residential Shopping Center or Mall Apartment and Office Building Industries and Factory
Applications Network
Modbus RS485
Serial Converter USB/RS232/Ethernet to RS485
PC (PC Reader Meter)
Pulse Concentrator TMEX-16DI
TEM021-D TEM021-D TEM021-D
Convenient installation for any application as stand alone me-ter or for any meters use with Pulse Concentrator application:
Technical Specification: Model TEM021-LCD Display Connecting Mode Direct Connections or CT Connections
Accuracy Class Class 1.0
Reference Voltage (Un) 3X230/400V AC (3~) Network 3 phase 4 wire
Operating Voltage 161/279-300/520V AC (3~) AC Voltage withstand 2 KV for 1 minute
Impulse Voltage 6kV-1.2/50μS waveform
Basic Rate Current (Ib) 5A, 10A direct connection
Maximum Rates Current (Imax) Via CT/5A or 100A direct connection
Operating Current Range 0.2%Ib ~ Imax Via CT or 0.5%Ib ~ Imax for Direct Connections
Operating Frequency Range 50 Hz + 10% Internal Power Consumption <2W/10VA per phase Operating Humidity Range <75%
Storage Humidity Range <95%
Operating Temperature Range -150 C ~ + 550 C
Storage Temperature Range -300 C ~ + 700 C
Pulse Output rate (meter constant) 1600 imp/kWh for CT and 160 imp/kWh for direct connection
Pulse Output Pulse Output (Open Collector), Suitable to connect to BAS System
Display 7 Digits LCD Display
Authority International Standard IEC62053-21, DIN EN50022
Overall Dimensions (W x H x D) W: 125 mm x H: 88 mm x D: 73 mm ( 7 DIN Module )
Export SO ( Add. Pulse output ) SO 100 imp/kWh for CT and SO 10 imp/kWh
thera ®
Power & Electricity Meters Page
18 Catalog thera , 01/2009
* if you need different voltage or current specifications, please advisory our sales
Type / Order No. Rate Voltage (V) Rate Current (Ib / Imax ) A
Operating Current Range (A)
TEM021 - D05C0 3x230/400 CT/5A 0.04%Ib ~ Imax TEM021 - D85G0 3x230/400 5(100)A 0.04%Ib ~ Imax TEM021 - DC5G0 3x230/400 10(100)A 0.04%Ib ~ Imax
Ordering code
Copyright © by thera 01/2009, Subject to change without prior notice
Direct Connections
Overall Dimension
Installation CT Connections
TEMO41- D
Three Phase Electronic Active Energy Meter Multi-rate (Double Tariff)
Model TEM041 Series three phase four wire electronic multi-rate DIN rail active energy meter is a kind of three phase four wire three tariffs (time-sharing billing) active energy meter, the meter completely accord with relevant technical requirements of class 1 three phase active energy meter stipulated in international standard IEC 62053-21. It can accurate and directly measure 50Hz or 60Hz active energy consumption from three phase four wire AC electricity net. This meter has seven digits LCD displays shows various consumption data and information. And there are far infrared and RS485 communication module in it. It is use for setting and reading the meter. Contact with all kind of AMR system conveniently. It has following features: good reliability, small volume, light weight, specious nice appearance, convenient
• 35mm standard DIN rail installation, complying with standard DIN EN50022.
• Ten pole width (Modulus 12.5mm), complying with standard JB/T7121-1993
• Have three tariffs, may select 12 daily period of times. You can set the date arbitrary which can automatic read the meter every month. May select single tariff function in weekend. (Please specified when ordering).
• There are a clock and Maintenance-free backup lithium batteries in it. Battery capacity detection and display all the time. It can keep the electricity data for 12 months. The data can be kept forever after blackout.
• There are a polarity port of pulse output passive closed and a no polarity port of pulse output passive distant, the output rate is 10 or 100 imp/kWh (can select), Complying with standard IEC 62053-31 and DIN 43864.
• There are far infrared and a port of RS485 communication data. It is use for setting and reading the meter.
• Ten LED instructions respectively power supply state, signal of energy impulse, the direction of the flow of load current, the tariff state just now and the data communications state.
TEM041-D Series
thera Power & Electricity Meter
Introductions
General Functions
Copyright © by thera 01/2009, Subject to change without prior notice
Page
19 Catalog thera , 01/2009
®
Features
Network
2-Wire ModbusNet
Serial Converter RS485/RS323
PC (Personal Computer)
TEMO41-D
Pulse Concentrator
Tmex-16DI
TEMO41-D TEMO41-D
2-Wire RS485Net
Pulse Modbus Net RS485 Net
Use possibility:
DIN rail mounting
Wide rage current measurement
Pulse output (SO)
Easy installation
Four modules (4DIN Module)
Accuracy Class 1.0
Light Weight & Good reliability
RS485 and Infra Red port
Built-in Time Switch (settable)
Multi-rate or Double tariff
Application
Residential Office/Commercial Building Shopping Center (Mall) Multi tenant Apartment Factory & Industrial Panel Telecommunications (BTS)
Technical Specification: Model TEM041- D Series Connecting Mode Direct Connections or CT Connections
Accuracy Class Class 1.0
Reference Voltage (Un) 3X230/400V AC (3~) Network 3 phase 4 wire
Operating Voltage 161/279-300/520V AC (3~) AC Voltage withstand 2 KV for 1 minute
Impulse Voltage 6kV-1.2/50μS waveform
Rate Current (Ib) CT or 5A, 10A direct connection
Maximum Rates Current (Imax) Via CT or 100A direct connection
Operating Current Range 0.2%Ib ~ Imax Via CT or 0.5%Ib ~ Imax for Direct Connections
Operating Frequency Range 50 Hz + 10% Internal Power Consumption <2W/10VA per phase Operating Humidity Range <75%
Storage Humidity Range <95%
Operating Temperature Range -150 C ~ + 500 C
Storage Temperature Range -300 C ~ + 700 C
Pulse Output rate (meter constant) 1600 imp/kWh for CT and 160 imp/kWh for direct connection
Output Pulse Output (Open Collector), Suitable to connect to BAS System
Display 6+1 Digits Register LCD Display
Authority International Standard IEC61036, DIN EN50022
Overall Dimensions (W x H x D) W: 125 mm x H: 88 mm x D: 73 mm ( 7DIN Module )
Communication Port RS485 Modbus communications and far Infrared port
thera ®
Power & Electricity Meters Page
20 Catalog thera , 01/2009
* if you need different voltage or current specifications, please advisory our sales
Type / Order No. Rate Voltage (V) Rate Current (Ib / Imax ) A
Operating Current Range (A)
TEM041 - D0523 3x230/400 CT/5A 0.04%Ib ~ Imax TEM041 - D7523 3x230/400 5(100)A 0.04%Ib TEM041 - D8503 3x230/400 10(100)A 0.04%Ib ~ Imax
Ordering code
Copyright © by thera 01/2009, Subject to change without prior notice
Installation Direct Connections CT Connections
Overall Dimension
TEMO45-D
Three-phase Electronic Energy Meter With Modbus RTU Communication Output ( Port RS485 )
New
New TEMO45-D Series is a DIN rail three phase four wire electronic energy meter with modbus communi-cation protocol. The total energy consumption is show-ing via 6+1 (7 digit) LCD displayed based on kWh and the data can be readable by isolated RS485 port also for other value measured data on internal modbus register memory can be readable from RS485 as for V, A, Hz, Cos Pi and VA. The meter is provided with a non-volatile memory system that ensures that the readings are not lost or altered when power off. With Modbus RTU protocol these meter configured as a slaves meter and will be easy to remote communication with other Modbus Master such BAS/AMR/SCADA or PLC to collect the active energy consumption data from dis-tance.
We have introduced a large scale of energy meters on the market suitable for 3 x 220V AC to 380V AC (50 or 60Hz). Although we produce the thera TEMO45D energy meter according to IEC / EN62053-21 and our quality inspection is very accurate. With wide range current measuring rated 3 x 10(100)A direct measuring or direct reading Programmable CT ratio from 5/5A to 5000/5A.
TEM045-D Series
DIN-Rail mounting
Wide rage current measurement
SO (Pulse) output
RS485 MODBUS RTU communi-cation Protocol
thera Power & Electricity Meter
Introduction Feature
General Specification
Convenient installation for any application as stand alone meter or for any meters with modbus RS485 network application:
Residential Modern office/Commercial building Shopping Center (Mall) Multi tenant Apartment Factory & Industrial
Application
Easy installation
Seven modules ( 7 DIN )
2-Wire RS485 Net
Serial Converter USB/RS232/Ethernet
to RS485
PC (Modbus Master)
other Modbus device
TEMO45-D TEMO45-D TEMO45-D
Copyright © by thera 01/2009, Subject to change without prior notice
Programmable CT Ratio from 5/5A to 5000/5A
Page
21 Catalog thera , 01/2009
Accuracy Class 1.0
CT Ratio Programming
Easy setting on meter Via key-press:
Modbus-RS485 ID-Address device programming
Baud rate Programming
®
Technical Specification: Model TEM045-D
Connecting Mode Direct Connections or CT (with current transformer) Accuracy Class Class 1.0 Reference Voltage (Un) 3x220/380V AC (3~)
Network 3 phase 4 wire
Operating Voltage 161/279-380/400 AC (3~)
AC Voltage withstand 2 KV for 1 minute
Impulse Voltage 6kV-1.2/50μS waveform
Rate Current (Ib) 5A, 10A direct connection
Maximum Rates Current (Imax) 100A direct connection or CT/5A
Operating Current Range 0.4%Ib ~ Imax
Operating Frequency Range 50 Hz + 10%
Internal Power Consumption <2W/10VA per phase
Operating Humidity Range <75%
Storage Humidity Range <95%
Operating Temperature Range -150 C ~ + 500 C
Storage Temperature Range -300 C ~ + 700 C
Pulse Output rate (meter constant) 3600 imp/kWh for CT and 400 imp/kWh for direct connection
CT Changing –Ratio Fully Programmable CT Ratio 5/5A to 5000/5A
Data Communication port RS485 port with baud rate 4800,9600 bps user settable
Data Save The data can be stored more than 20 years when power off
Protocol MODBUS RTU with 16 bit CRC Address range 0-247 user settable
Display 7 Digit LCD Display ( 6 digit + 1 Decimal )
Authority International Standard IEC / EN62053-21, and DIN EN520022 Overall Dimensions (W x H x D) W: 125 mm x H: 88 mm x D: 73 mm ( 7 DIN Module)
* if you need different voltage or current specifications, please advisory our sales
Page
22
thera ®
Power & Electricity Meters
Catalog thera , 01/2009
1 Ua In 3 Ub In 5 Uc In N/N Un Neutral In/Out 11/12 (-),(+) Test pulse Output 15/16 (-),(+) RS485 comm. Port L1/L1 Ia IN/OUT L2/L2 Ib IN/OUT L3/L3 Ic IN/OUT
L1/L1 Ua In/Out L2/L2 Ub In/Out L3/L3 Uc In/Out N/N Un Neutral In/Out 11/12 (-),(+) Test pulse Output 15/16 (-),(+) RS485 comm. Port
Copyright © by thera 01/2009, Subject to change without prior notice
Overall Dimension
Dimension : W : 126 mm x H: 130 mm x D: 65 mm
Ordering code Type / Order No. Rate Voltage (V) Rate Current (Ib / Imax ) A Operating Current Range (A) TEM045 - D0523 3 x 230/400 3 x CT/ 5A 0.04%Ib ~ Imax TEM045 - DC573 3 x 230/400 3 x 10(100)A 0.04%Ib ~ Imax
Installation
Direct Connections
CT Connections
N
L3
L2
L1
12
11so
16
15485/CMbus
+
-
N
L3
L2
L1 Ua
Ub
Uc
Un
+
-
L3
L2
L1
12
11so
16
15485/CMbus
+
-
L3
L2
L1 Ia+
Ib+
Ic+
NN Un
1
3
5
Ua
Ub
Uc
Ia-
Ib-
Ic-
+
-
TEMO65-D
Three-phase Electronic Multi-rate Energy Meter With Modbus RTU Communication Output (Port RS485)
New
New TEMO65-D Series is a DIN rail three phase four wire electronic Multi-rate energy meter with modbus RTU communication protocol. The total energy consump-tion is showing via 6+1 (7 digit) LCD displayed based on kWh the data can be readable by isolated RS485 port also for other value measured data on internal modbus register memory can be readable from RS485 as for kWh, Kvarh, V, A, Hz, PF, W and VA. The meter is provided with a non-volatile memory system that en-sures that the readings are not lost or altered when power off. With Modbus RTU protocol these meter configured as a slaves meter and will be easy to remote communication with other Modbus Master such BAS/AMR/SCADA or PLC to collect the energy consumption data from distance.
We have introduced a large scale of energy meters on the market suitable for 3 x 220V AC to 380V AC (50 or 60Hz). Although we produce the thera TEMO45D energy meter according to IEC / EN62053-21 and our quality inspection is very accurate. With wide range current measuring rated 3 x 10(100)A direct measuring or direct reading Programmable CT ratio from 5/5A to 5000/5A.
TEM065-D Series
DIN-Rail mounting
Wide rage current measurement
Build-in SO (Pulse) output
RS485 MODBUS RTU communi-cation Protocol
thera Power & Electricity Meter
Introduction Feature
General Specification
Convenient installation for any application as stand alone meter or for any meters with modbus RTU(RS485) network application as for:
Residential Modern office/Commercial building Shopping Center (Mall) Multi tenant Apartment Factory & Industrial
Application
Easy installation
Seven modules ( 7 DIN )
Modbus RTU
Serial Converter USB/RS232/Ethernet
to RS485
PC (Modbus Master)
other Modbus device
Copyright © by thera 01/2009, Subject to change without prior notice
Programmable CT Ratio from 5/5A to 5000/5A
Page
23 Catalog thera , 01/2009
Accuracy Class 1.0
CT Ratio Programming
Easy setting on meter Via key-press:
Modbus RTU ID-Address device programming
Baud rate Programming
®
Multi-Tariff functions (4 tariff)
Technical Specification: Model TEM065-D
Connecting Mode Direct Connections or CT (with current transformer) Accuracy Class Class 1.0 Reference Voltage (Un) 3x220/380V AC (3~)
Network 3 phase 4 wire
Operating Voltage 161/279-380/400 AC (3~)
AC Voltage withstand 2 KV for 1 minute
Impulse Voltage 6kV-1.2/50μS waveform
Rate Current (Ib) 10A Basic Current
Maximum Rates Current (Imax) 60A, 100A direct connection or with external CT/5A
Operating Current Range 0.4%Ib ~ Imax
Operating Frequency Range 50 Hz + 10%
Internal Power Consumption <2W/10VA per phase
Operating Humidity Range <75%
Storage Humidity Range <95%
Operating Temperature Range -150 C ~ + 500 C
Storage Temperature Range -300 C ~ + 700 C
Pulse Output rate (meter constant) 3600 imp/kWh for CT and 400 imp/kWh for direct connection
CT Changing –Ratio Fully Programmable CT Ratio 5/5A to 5000/5A
Data Communication port RS485 port with baud rate 4800,9600 bps user settable
Data Save The data can be stored more than 20 years when power off
Protocol MODBUS RTU with 16 bit CRC Address range 1-247 user settable
Display 7 Digit LCD Display ( 6 digit + 1 Decimal )
Authority International Standard IEC / EN62053-21, and DIN EN520022 Overall Dimensions (W x H x D) W: 125 mm x H: 88 mm x D: 73 mm ( 7 DIN Module)
* if you need different voltage or current specifications, please advisory our sales
Page
24
thera ®
Power & Electricity Meters
Catalog thera , 01/2009
1 Ua In 3 Ub In 5 Uc In N/N Un Neutral In/Out 11/12 (-),(+) Test pulse Output 15/16 (-),(+) RS485 comm. Port L1/L1 Ia IN/OUT L2/L2 Ib IN/OUT L3/L3 Ic IN/OUT
L1/L1 Ua In/Out L2/L2 Ub In/Out L3/L3 Uc In/Out N/N Un Neutral In/Out 11/12 (-),(+) Test pulse Output 15/16 (-),(+) RS485 comm. Port
Copyright © by thera 01/2009, Subject to change without prior notice
Overall Dimension
Dimension : W : 126 mm x H: 130 mm x D: 65 mm
Ordering code Type / Order No. Rate Voltage (V) Rate Current (Ib / Imax ) A Operating Current Range (A) TEM065 - D0481 3 x 230/400 3 x CT/ 5A 0.04%Ib ~ Imax TEM065 - DC481 3 x 230/400 3 x 10(100)A 0.04%Ib ~ Imax
Installation
Direct Connections
CT Connections
NL3L2L1
12
11 so
16
15485/ CMbus
+
-
NL3L2L1 Ua
UbUcUn
+
-
L3
L2
L1
12
11 so
16
15485/ CMbus
+
-
L3
L2
L1 I a+
I b+
I c+NN Un
1
3
5
Ua
Ub
Uc
I a-
I b-
I c-
+
-
TEMO16
Single Phase Electronic Active Energy Meter Front Board Installed
Model TEM016 single phase electronic front board installed active energy meter is a kind of new style single phase two wire active energy meter, it adopt micro-electronics technique, and imported large scale integrate circuit, use advanced technique of digital and SMT techniques, etc. The meter completely accord with relevant technical requirements of class 1 single phase active energy meter stipulated in international standard IEC 62053-21 and SPLN D3.005-1 : 2008. It can accurate and directly measure 50Hz or 60Hz active energy consumption from single phase AC electricity net, it is use for setting indoor or outdoor and it can display total energy consumption by step motor type impulse regis-ter. It has following features: good reliability, light weight, specious nice appearance, convenient installation.
• Front board three fixed holes installation, the cover is made of high definition transparent glass material molded overall, the base of the is made of steel and anti-rust, meter and the terminal block is made of quality bakelite material which is moisture-resistant, fire-retardant, high temperature molded overall. It has following features: Good weather ability, high rigid, specious appearance, etc.
• Standard configuration 5+1 digits display (99999.1kWh) by step motor and pulse machinery counter.
• Standard configuration one port of pulse output passive (polarity) May select increase a distant port of pulse output passive (no polarity). And contact with all kind of AMR system conveniently complying with standard IEC 62053-31 and DIN 43864.
• Standard configuration three LED instructions, power state (green), signal of power impulse (yellow) and auto-matic detection of Anti-Tampering (red).
• Single direction two component measure single phase two wire active power consumption. It is nothing with direction of the trend of load current. Complying with standard IEC 62053-21.
• Automatic detect current of phase line and neutral line when the two current error will automatic show the fault signal.
• Extended cover and base plate MCB compatible (Compact), in order to protect to use electricity safety.
TEM016 – Series
Front Board/Wall Mounting
Wide rage current measurement
Pulse output (kWh)
thera Power & Electricity Meter
Introductions Features
General Functions
Easy installation
Anti—Tamper
Copyright © by thera 01/2010, Subject to change without prior notice
Page
25 Catalog thera , 01/2010
Accuracy Class 1.0
®
Light Weight & Good reliability
High definition transparent glass Material cover.
Steel & anti-rust body case
Application
Residential Segment
Commercial Segment
Technical Specification: Model TEM016 - Series Connecting Mode Direct Connections
Accuracy Class Class 1.0
Reference Voltage (Un) 230V AC Network 1 phase 2 wire
Operating Voltage 168-300V AC AC Voltage withstand 4 KV for 1 minute
Impulse Voltage 6kV-1.2/50μS waveform
Rates Current Ib(Imax) 5 (60)A, direct connection
Starting Current Range 0.004Ib, direct connection
Operating Current Range 0.05Ib ~ Imax , direct connection
Operating Frequency Range 50 Hz + 10% Internal Power Consumption <2W/10VA Operating Humidity Range <75%
Storage Humidity Range <95%
Operating Temperature Range -150 C ~ + 850 C
Storage Temperature Range -200 C ~ + 850 C
Pulse Output rate (meter constant) 1600 imp/kWh
Output Pulse Output (Open Collector), Suitable to connect to BAS System
Display 5+1 Digits Register Counter Display
Authority International Standard IEC61053-21; SPLN D3.005-1:2008
Overall Dimensions (W x H x D) W: 142.5 mm x H: 211 mm x D: 67 mm
Indicator Three Color LED (Power:green, pulse rate:yellow, & Anti Tamper with red LED color)
thera ®
Power & Electricity Meters Page
26 Catalog thera , 01/2009
* if you need different voltage or current specifications, please advisory our sales
Type / Order No. Rate Voltage (V) Rate Current (Ib / Imax ) A Starting Current Range (A)
TEM016 - C3230 230 5(60)A 0.004Ib (Direct)
Ordering code
Copyright © by thera 01/2009, Subject to change without prior notice
Installation
Overall Dimension
TEMO91– L
Single-Phase Prepayment Electronic Energy Meter Front Board Installed
Model TEM091- L series single phase electronic prepayment front board installed active energy meter is a kind of single phase two wire active energy meter which purchase electricity by IC card, electric energy measuring, load control and using electricity management. The meter completely accord with relevant technical requirements of class 1 single phase active energy meter stipulated in international standard IEC 62053-21. It can accurate and directly measure 50Hz or 60Hz active energy consumption from single phase AC electricity net, it is use for setting indoor or out door meter box. This meter has LED display shows power. It has following features: good reliability, light weight, specious nice appearance, convenient installation, etc.
• Standard configuration one meter one card, can repeat input money from PC machinery which with IC programmer, may select one-time recharge card. (Please specified when ordering).
• It has IC card with code and data against false, standard configuration use storage IC card.
• Standard configuration payment by kWh, may select payment by money. It has load control and function of automatic fault detection and instructions, standard configuration without function of open terminals cover and detection.
• A port of pulse output passive closed (polarity), complying with standard IEC 62053-31 and standard DIN 43864.
• Two LED instructions signal of energy impulse (red) and direction of the flow of load current (yellow).
• Automatic detection the direction of the flow of load current. When the yellow LED display, that is meaning the direction of the flow of load current reverse.
• Single direction single component measure single phase two wire active energy consumption. It is nothing with direction of the flow of load current. Complying with standard IEC 62053-21.
TEM091- L Series
Front Board/Wall Mounting
Wide rage current measurement
SO output
thera Power & Electricity Meter
Applications Features
General Functions
Easy installation
Smart IC Card
Vending Card RS232 (COM)
Prepaid Management Software (PC) TEM091L/D TEM091L/D
Copyright © by thera 01/2009, Subject to change without prior notice
Page
27 Catalog thera , 01/2009
Accuracy Class 1.0
®
Light Weight & Good reliability
Applications
• Residential • Office/Commercial
building • Shopping Center (Mall)
Card Card
Accessories
Vending Software
Technical Specification: Model TEM091-L Series Connecting Mode Direct Connections
Accuracy Class Class 1.0
Reference Voltage (Un) 230 VAC Network 1 phase 2 wire
Operating Voltage 161~279/300 AC AC Voltage withstand 4 KV for 1 minute
Impulse Voltage 6kV-1.2/50μS waveform
Rate Current (Ib) 5A, 10A , 20A direct connection
Maximum Rates Current (Imax) 30A, 40A, 100A direct connection
Operating Current Range 0.4%Ib ~ Imax
Operating Frequency Range 50 Hz + 10% Internal Power Consumption <2W/10VA per phase Operating Humidity Range <75%
Storage Humidity Range <95%
Operating Temperature Range -150 C ~ + 500 C
Storage Temperature Range -300 C ~ + 700 C
Pulse Output rate (meter constant) 1600 imp/kWh
Output Pulse Output (Open Collector), Suitable to connect to BAS System
Display 6+1 Digits Register LCD Display & 5+1 Digits for LED Display
Authority International Standard IEC61053-21
Overall Dimensions (W x H x D) W: 110 mm x H: 201 mm x D: 68 mm
thera ®
Power & Electricity Meters Page
28 Catalog thera , 01/2009
* if you need different voltage or current specifications, please advisory our sales
Type / Order No. Rate Voltage (V) Rate Current (Ib / Imax ) A
Operating Current Range (A)
TEM091 - L4230 230 Vac 5(20)A 0.04%Ib ~ Imax TEM091 - LA220 230 Vac 10(40)A 0.04%Ib ~ Imax TEM091 - LE210 230 VaC 20(100)A 0.04%Ib ~ Imax
Ordering code
Copyright © by thera 01/2009, Subject to change without prior notice
Installation
Overall Dimension
TEM1O1– L
Three Phase Prepayment Electronic Active Energy Meter Front Board Installed
Model TEM101-L three phase four wire electronic prepayment front board installed active energy meter is a kind of three phase four wire active energy meter which purchase elec-tricity by IC card, electric energy measuring, load control and using electricity management. The meter completely accord with relevant technical requirements of class 1 single phase active energy meter stipulated in international standard IEC 62053-21. It can accurate and directly measure 50Hz or 60Hz active energy consumption from three phase four wire AC electricity net, it is use for setting indoor or out door meter box. This meter has LED display shows power. It has following features: good reliability, light weight, specious nice appear-ance, convenient installation, etc.
• It support repeat recharge and one-time recharge from IC programmer and PC machinery online at the same time.
• The IC card use logic and encryption, with code and data against false.
• Standard configuration payment by kWh, may select payment by money
• It has load control and function of automatic fault detection and instructions, standard configuration without function of open terminals cover and detection, may select open terminals cover and cut power.
• 6 LED digits display, 5+1 digits display (99999.1kWh), may select 7 LCD digits display.
• A port of pulse output passive closed (polarity), complying with standard IEC 62053-31 and standard DIN 43864.
• Five LED instructions power supply state, signal of energy impulse and direction of the flow of load current.
• Automatic detection the direction of the flow of load current. When the yellow LED display, that is meaning the direction of the flow of load current reverse.
• Single direction three component measure three phase four wire active energy consumption. It is nothing with direction of the flow of load current. Complying with standard IEC 62053-21.
TEM101– L Series
Front Board/Wall Mounting
Wide rage current measurement
SO output
thera Power & Electricity Meter
Introductions Features
General Functions
Easy installation
Smart IC Card
Copyright © by thera 01/2009, Subject to change without prior notice
Page
29 Catalog thera , 01/2009
Accuracy Class 1.0
®
Light Weight & Good reliability
PC Management Software
Application
TEM
101
Vending Machine RS232COM
TEM
101
CARD CARD
Technical Specification: Model TEM101-L Series Connecting Mode Direct Connections
Accuracy Class Class 1.0
Reference Voltage (Un) 3x230/400V AC Network 3 phase 4 wire
Operating Voltage 161/279-300/520V AC AC Voltage withstand 4 KV for 1 minute
Impulse Voltage 6kV-1.2/50μS waveform
Rate Current (Ib) 5A, 10A , 20A direct connection
Maximum Rates Current (Imax) 30A, 40A, 100A direct connection
Operating Current Range 0.4%Ib ~ Imax
Operating Frequency Range 50 Hz + 10% Internal Power Consumption <2W/10VA per phase Operating Humidity Range <75%
Storage Humidity Range <95%
Operating Temperature Range -150 C ~ + 500 C
Storage Temperature Range -300 C ~ + 700 C
Pulse Output rate (meter constant) 100 imp/kWh
Output Pulse Output (Open Collector), Suitable to connect to BAS System
Display 7 Digits Register LCD Display
Authority International Standard IEC61053-21
Overall Dimensions (W x H x D) W: 145 mm x H: 218 mm x D: 73 mm
-
thera ®
Power & Electricity Meters Page
30 Catalog thera , 01/2009
* if you need different voltage or current specifications, please advisory our sales
Type / Order No. Rate Voltage (V) Rate Current (Ib / Imax ) A
Operating Current Range (A)
TEM101 - L3520 3x230/400 5(25)A 0.04%Ib ~ Imax TEM101 - L7500 3x230/400 10(50)A 0.04%Ib ~ Imax TEM101 - LC500 3x230/400 15(90)A 0.04%Ib ~ Imax
Ordering code
Copyright © by thera 01/2009, Subject to change without prior notice
Overall Dimension
Installation
Therasoft Eco
Eco Energy Management Software & Control Remote Energy Supervision Of Low and Medium Voltage Networks
New
Therasoft is an economical energy management software, which can be redesigned as a customize software of the customer project requirements. The continuous increase of energy costs together with the possibility to select the most suitable contract among different energy providers make more and more convenient a supervisory system able to ensure a continuous monitoring of power consumption and energy costs of low and medium voltage networks. Thanks to Therasoft software, it has been possible to develop many supervisory applications able to provide both the continuous monitoring of the electrical network and the possibility to increase the overall efficiency. Therasoft includes a series of internal objects especially designed to display electrical schemes and cabinets, to monitor power consumption, to calculate energy costs using both real or simulated calendars with different fares according to date and time. Display of electrical schemes with animated switches and lines changing colour according to current path allow highlighting of energy flows, quick spotting of abnormal operation and prevention of possible power overflow. Monitoring of power consumption and energy costs of single user lines and of the overall network in the form of daily, monthly and yearly bar charts provide an ideal report for analysis and optimization of the electrical network; the possibility to program the yearly calendar with different fares according to date and time is an essential tool to prepare a budget plan and select the contract more suitable for anyone’s requirements.
THERASOFT
MODBUS RTU communication
Multi-pages Monitoring system
Reports accessible from Excel, Access, etc.
thera Power & Electricity Meter
Introduction Feature
Therasoft suitable for any application for remote supervisory as small meter network or for large s meters network application as for :
Residential Modern office/Commercial building Shopping Center (Mall) Multi tenant Apartment Factory & Industrial
Application
Graphics & Chart Monitoring
On-line Energy Electronic Billing
Copyright © by thera 01/2009, Subject to change without prior notice
Page
37 Catalog thera , 01/2009
TCP/IP Client Server support
Special applications as on customers request:
Status Alarm, Device & Status
Historical Alarm & Change User
®
GSM Network (optional on re-quested)
Energy Max-demand Limiter
Automatic Meter Reading
Remote Energy Billing system
Minimum Configuration:
Model THERASOFT Eco
Platform Personal Computer (PC)
Operating System Window 2000 & XP Compatible
CPU Processor Pentium IV or Higher
Memory RAM 128 MB RAM or Higher
Hard disk Drive 40 GByte
Communication Port RS232, RS485 or Ethernet Port
* if you need different applications or as your specifications required, please advisory our sales
Page
38
thera ®
Power & Electricity Meters
Catalog thera , 01/2009
Modbus 2-Wire RS485 Net
Serial Converter USB/RS232/Ethernet
to RS485 PC (Therasoft Eco)
other Modbus device
TEMO35-D TEMO45-D TEMO35-D
Copyright © by thera 01/2009, Subject to change without prior notice
Ordering code Type / Order No. Version (V) Capacity (Point) Description TSOFT - ECO256 Standard 256 — 512 Eco Energy Management TSOFT - ECOZXX Customize On Request On request ( OEM )
Energy Network Application Example
Associate Product TEMO35 Energy Meter
TEMO45 Energy Meter
TEMO65 Multifunction Meter
TEMO65 Power Monitor
TIMEX 306-256 Data Concentrator
TIMEX16 Data Concentrator
TEMO31-D
Pulse Concentrator Tmex-16DI
Pulse Modbus Net
Use possibility:
TPM230D TEMO35-D
TEMO11-C TEMO15-D
Tmex-306/256 Pulse Concentrator Expandable
TEMO21-C TEMO41-C
Modbus RTU Net, RS485/2-wire
Serial Converter USB/RS232/
Ethernet to RS485
AMR Software & Billing (Remote PC)
TMEX-16DIP
Pulse Data Concentrator 16 Channel With Modbus RTU Protocol RS485/2-wire Communication
These TMEX-16DIP Series are used to interface energy count-ers (both single-phase and three phase) provided with pulses output, with PC's, PLC's and acquisitions systems using a se-rial RS485 interface and ModBus RTU Protocol. It is therefore possible to setup a telemetering system composed of up to 128 Device (connected between them with a simple twisted pair wire of maximum length 1200 M). Each one of them to receive the counting pulses of up to 16 maximum of energy counters. By this system it is possible to obtain the energy count of each counter, using only once RS485 interface, and without the need of as many digitals inputs as the number of the existing energy counters. To leap the transmitted values equal to those actually displayed on the counters, or to per-form partial energy counting, the concentrators counting reg-isters can be preset to desired value or reset to zero, In addi-tion, the registers are saved approx every time in a non-volatile memory, in order to prevent data loses in case of power supply failure.
A new line of Modbus based Data Concentrator modules for data acquisition and other applications are available now. These modules offer good realibility, low cost solution for dis-tributed pulse inputs applications, They are portable, easy integrated with existing Modbus network, and simple to use for end users. Various types of module are available for differ-ent kinds of requirements. All modules have LED indications for visualization of Input status (Digital) and fault diagnostic analisys some models with high isolation among inputs are also available for special applications. With Modbus RTU pro-tocol these data concentrator modules configured as slaves will be easy to communicate with Modbus master such as BAS/SCADA/PLC/HMI. The Central modules have 2 wire RS485 interface with RTU protocol.
TMEX – 16DIP Series
DIN Rail Mounting
Easy Modbus RTU Addressable up to 128 Device Address
Up to 16 Pulse Input per device
thera Power & Electricity Meter
Introductions Features
General Functions
Easy installation
Copyright © by thera 01/2009, Subject to change without prior notice
Page
39 Catalog thera , 01/2009
Compact & Small Size!
®
Light Weight & Good reliability
Application
Modern office/Commercial
Shopping Center (Mall)
Multi Tenant Apartment
Factory & Industrial
House/Residential rent
Installation note Convenient installation for any application as stand alone data concentrator or for any divice with Modbus-RTU RS485 net-work application:
TMEX 16 Module
TEM
015
Pulse Output Meter
TMEX 16 Module
TEM
015
Pulse Output Meter
To other Modbus Device
The pulse input can be collect from energy meter , water meter or gas meters, as for application below
Technical Specification:
Model TMEX-16DIP
Power Supply 12 ~ 24 Vdc
Pulse Digital Input Central Module
• Input Points 16 Input • Input Voltage Range 12~24 Vdc
• Input Current per Input 5mA @12Vdc and 11mA @24Vdc Counters register Internal Memory
• Inputs max 16 points Maximum
• Resolution 32 Bits
• frequency 1 KHz (max)
• Pulse Width 500 us (min)
Temperature
• Operating Temperature 0oC ~ 55oC
• Storage Temperature -20oC ~ 85oC
Terminal Connectors type Screw Type Terminal
• Logic Power and Com. 4 Pin screw type terminal on bottom side of unit
• Inputs terminal & Comm. 18 Pin screw type terminal on front
Communication Port Address able Slave 0 ~ 127 device (user settable)
• Protocol Network Modbus RTU - RS485/2-Wire
• Data Communication P:None, Data:8, Stop-bit:1
• Baud Rate (bps) 2400,4800,9600,19200 & 38400 Default : 9600 bps
Status Indicator Red LED for Power, TX/RX–Rs485 & Pulse Input
Dimensions (W x H x D) mm 22.6 x 109.0 x 97.5 mm
thera ®
Power & Electricity Meters Page
40 Catalog thera , 01/2009
* You can select to configure the concentrator address device from 0 up to 127 slave as per your required
Ordering code
Copyright © by thera 01/2009, Subject to change without prior notice
Installation Overall Dimension
Type / Order No. Voltage (V) Pulse Input (point) Module Description
TMEX-16DIP 12~24 VDC 16 x DI 12~24Vdc 16 Pulse Input Module
Pulse(+)
Pulse(-)
TEMO15
+12~24Vdc PS
To Input Module kWh
Indicator
Pulse Input Contact from meters
DIP Switch for slave Device Addressable
Meter Conenction Sample
Modbus RTU Net, RS485/2-wire
Serial Converter USB/RS232/
Ethernet to RS485
AMR Software & Billing (Remote PC)
TMEX-16DI
Expandable Pulse Data Concentrator With Modbus RTU Protocol RS485/2-wire Communication
These TMEX-16DI Series are used to interface energy count-ers (both single-phase and three phase) provided with pulses output, with PC's, PLC's and acquisitions systems using a se-rial RS485 interface and ModBus RTU Protocol. It is therefore possible to setup a telemetering system composed of up to 31 Device (connected between them with a simple twisted pair wire of maximum length 1200 M). Each one of them to receive the counting pulses of up to 78 maximum of energy counters. By this system it is possible to obtain the energy count of each counter, using only once RS485 interface, and without the need of as many digitals inputs as the number of the existing energy counters. To leap the transmitted values equal to those actually displayed on the counters, or to per-form partial energy counting, the concentrators counting reg-isters can be preset to desired value or reset to zero, In addi-tion, the registers are saved approx every time in a non-volatile memory, in order to prevent data loses in case of power supply failure.
A new line of Modbus based Data Concentrator modules for data acquisition and other applications are available now. These modules offer good realibility, low cost solution for dis-tributed pulse inputs applications, They are portable, easy integrated with existing Modbus network, and simple to use for end users. Various types of module are available for differ-ent kinds of requirements. All modules have LED indications for visualization of Input status (Digital) and fault diagnostic analisys some models with high isolation among inputs are also available for special applications. With Modbus RTU pro-tocol these data concentrator modules configured as slaves will be easy to communicate with Modbus master such as PC/SCADA/PLC/HMI. The Central modules have 2 wire RS485 interface with RTU protocol.
TMEX – 16DI Series
DIN Rail & Wall Mounting type
Wide Range Voltage Input
Up to 78 Pulse Input per device
thera Power & Electricity Meter
Introductions Features
General Functions
Easy installation
Modbus RTU Protocol (32 slave)
Copyright © by thera 01/2009, Subject to change without prior notice
Page
41 Catalog thera , 01/2009
Compact & Expandable !
®
Light Weight & Good reliability
Included Real time Clock and Double tariff function (optional)
Internal pulse divider
Application
Modern office/Commercial
Shopping Center (Mall)
Multi Tenant Apartment
Factory & Industrial
House/Residential rent
Installation note Convenient installation for any application as stand alone data concentrator or for any divice with Modbus-RTU RS485 net-work application:
TMEX Module TMEX Module TMEX Module
TEM
015
TEM
015
TEM
015
Technical Specification:
Model TMEX-16DI-C306
Power Supply 85 ~ 265 Vac / 50 Hz
Pulse Digital Input Central Module
• Input Points 14 (Expandable up to 78) • Input Voltage Range 15~30 Vdc
• Input Current per Input 4.1mA at 24 Vdc Counters register Internal Memory
• Inputs max 78 points Maximum
• Resolution 32 Bits
• frequency 1 KHz (max)
• Pulse Width 5 ms (min)
Temperature
• Operating Temperature 0oC ~ 55oC
• Storage Temperature -20oC ~ 85oC
Terminal Connectors type Snap on Cable
• Logic Power and Com. 2+ 1(gnd) AC, 2 - RS485
• Inputs terminal & Comm. 14 + 2 point Common.
Communication Port Slave address 0 ~ 31 device
• Data Communication P:None, Data:8, Stop-bit:1
• Baud Rate (bps) 2400,4800,9600,19200 & 38400 Default : 9600 bps
Status Indicator Green LED
Dimensions (W x H x D) mm 125 x 114 x 70 mm
• Protocol Network (port-1) Modbus RTU - RS485/2w
TMEX-16DI-E321
Via internal bus
Expand Module
8 15~30 Vdc
4.1 mA at 24 Vdc Internal Memory
8
32 Bits
1 KHz (max)
5 ms (min)
0oC ~ 55oC
-20oC ~ 85oC
Snap on Cable
-
8 + 2 point Common
-
-
-
-
Green LED
50 x 114 x 70 mm
TMEX-16DI-M321
Via internal bus
Expand Module
16 15~30 Vdc
4.1 mA at 24 Vdc Internal Memory
16
32 Bits
1 KHz (max)
5 ms (min)
0oC ~ 55oC
-20oC ~ 85oC
Snap on Cable
-
16 + 2 common
-
-
-
-
Green LED
75 x 114 x 70 mm
thera ®
Power & Electricity Meters Page
42 Catalog thera , 01/2009
* You can select to configure the concentrator point from 14 point up to 78 point per slave as per your required
Ordering code
Copyright © by thera 01/2009, Subject to change without prior notice
Installation Overall Dimension &
Type / Order No. Voltage (V) Pulse Input (point) Module Description
TMEX-16DI-C306 230 VDC 14 x DI 12~24Vdc Central Module TMEX-16DI-E321 24 VDC 8 x DI 12~24Vdc Expand Module TMEX-16DI-M321 24VDC 16 x DI 12~24Vdc Expand Module
RS485-2Wire Modbus
Pulse(+)
Pulse(-)
TEMO15
+15~30Vdc PS
To Input Module kWh
TPM230-D
LCD-Multifunction Network Power Monitor Build-in MODBUS RTU Communication Protocol
TPM230-D is a multifunctional network electrical instrument, is specifically designed and made for thee electrical monitoring requirement of power distribution system. It is with high-precision measurement all of the common electrical parameters including of three-phase voltage, three-phase current, active power, reactive power, frequency, power factor and four-quadrant energy etc; Long-life LCD display the instrument measuring parameters and operation information of network system; Rs485 communication interface, applying MODBUS RTU communication protocol; with four program-mable keys on the instrument panel, convenient switch, programmable setting of instrument parameter switch great flexibility. Many kinds of extended function modules for choosing: four-channel and a log quantity(0-20mA/4-20mA(optional) output can realize the transmitting output function of electrical quan-tity; four-channel switching value input and four-channel switching value output to realize the local or long-range switch signal monitoring and control output function (function of remote signaling ”and“ remote control”). The instrument can directly replace conventional power transmitter, meas-uring indicating instrument, electric energy measuring instru-ment and the related auxiliary unit. With modular structural design, user scan choose the most economical functional configuration according to the actual requirement, which is highly cost-effective. It is widely used in occasions of energy management systems, supply and distribution network automation, district power control and complete sets of switchgear. It has the advantages of convenient installment and maintenance, sample wiring, small quantity, programmable input parameters and capable of the network with different PLC, industry control computer communications software.
TPM230-D Series
Four-Channel Digital Input
Wide rage current measurement
Two-Channel Energy Pulse Out
thera Power & Electricity Meter
Applications Features
Easy installation
Compact module 96x96 Square
2-Wire RS485 Net
Serial Converter USB/RS232/Ethernet
PC (Modbus Master)
other Modbus device
TPM230 TPM230 TPM230
Copyright © by thera 01/2009, Subject to change without prior notice
Page
43 Catalog thera , 01/2009
Build-in MODBUS RTU Protocol RS485 Port.
®
Light Weight & Good reliability
Applications Network
Convenient installation for any application as stand alone meter or for any meters with MODBUS RTU RS485 network application:
Power Distribution & transmission Factory & Industrial Plant
New
12 pages Parameters Display of 3I, 3V, 3U, PF, F, P, S, ±∑kWh and ±∑kQh, I/O Status, Total : kW, Kvar, KVA.
Page
44 Catalog thera, 01/2009
* if you need different voltage or current specifications, please advisory our sales
Type / Order No.
Rate Voltage (V)
Rate Current (A)
4DI
TPM230-DT 3P/4W,230 V CT/1 A or CT/5A Yes TPM230-DS 3P/4W,230 V CT/1A or CT/5A Yes TPM230-DD 3P/4W,230 V CT/1A or CT/5A Yes
4AI
- -
Yes
4DO
- Yes
-
RS485
Yes Yes Yes
2Imp
Yes Yes Yes
Ordering code
Copyright © by thera 01/2009, Subject to change without prior notice
thera Power & Electricity Meters
MODEL TPM230-D Network Three-phase three-wire, three-phase four- wire
Rated value AC 57.7V, 100V, 220V, 380V
Voltage Over load Consistent: 1.2 times instanaous: 2 times/30s
Input Consumption < 0.5VA{each phase}
Impedance > 500kW
Rated value AC 1A, 5A
Current Over load Consistent: 1.2 times instanaous: 2 times/1s
Impedance < 20mW{each phase}
Frequency 45 ~ 65Hz
Output mode Two-channel open-collector optical coupling pulse output
Pulse constant
Active 10000imp/kwh
Reactive 10000imp/kvarh
On the condition of rated voltage,
reference frequency and COSj=1.0,
Electric Start when load operational current is
energy 0.001 In, it can start and measure
the electric energy continuously.
When exerting 115% rated voltage and
Creep no current in the current circuitry, the
instrument is with no electric energy
Output accumulation and pulse output
Output mode RS485
Communication Protocol MODBUS RTU
Baud rate 1200, 2400, 4800, 9600
Channel quantity 4 channels
Analog Output mode 0 ~ 20mA, 4 ~ 20mA programmable
quantity Load ability <400W
Channel quantity 4 channels
Switching Output mode Normally open relay contact output
value Contact capability AC 240V/1A
Switching value input Four channel dry contact input modes
Display mode LCD { Blue or yellow green back lighting
Voltage, current + ( 0.5%FS+one digit )
Measuring Active power, reactive power, apparent power + ( 0.5%FS+one digit )
accuracy Frequency + 0.1 Hz
Power factor + 0.01 PF
Active energy + 0.5% {only for reference, not for meter age}
Reactive energy + 2.0% {only for reference, not for meter age}
Source Scope AC/DC 85 ~ 264V
Consumption <5VA
Input and source > 2kV50Hz/1min
Safety Withstand Input and output > 1kV50Hz/1min
voltage Output and source > 2kV50Hz/1min
Insulating resistance Any two of input, output, source, casing >20M
Temperature
Operation: - 10 ~ 50oC
Storage: - 25 ~ 70oC
Environment Humidity <85%RH, free of wet and gas corruption
Elevation <3000m
Technical Specification:
Dimensions (mm)
Shape Case Cutout hole
Square W H D W H
96x96 91 91 100 92 92