Accessories68 71 72 74 74 75 76 77 77 78 SwitchPanels Fans BatterySwitchesandBatteryCharger DualBatteryChargingRelay DistributionStuds CircuitBreakerModules WaterproofPlugsandSockets LightDimmer FlushMountSignalHorn BilgePumps

Accessories

ContourSeriesSwitchPanels

4Wayand6WayCompactSwitchPanelsSplash proof switch panels protected with neoprene rubber boots. Fuse is behind panel. Features: - Sprayproof inline fuse holders with fuses - Gasket, screws and label set Dimensions 95 x 107 x 55mm (H x W x D)

HousingDescription DegreeofProtection Switches MaximumLoad CompactSwitchPanelsGreypanel

Impact resistant plastic IP X5 4 or 6 ON/OFF rocker switches 12V / 20A

Whitepanel

4way 6way

8HG 998514-041 8HG 998514-051

8HG 998514-061 8HG 998514-071

Compact6WaySwitchPanels Attractive splash proof switch panels protected with neoprene rubber boots. Red and green LED backlit labels. Features: - Green LED backlit labels. - Red LED light indicates systems on. - Removable cover plate over switches conceals screws. - Label set and caps to cover left side screws. Dimensions 158 x 112 x 65mm (H x W x D)

HousingDescription DegreeofProtection Switches SwitchCurrentRating MaximumLoad

Impact resistant plastic IP X5 6 ON/OFF rocker switches 20A DC, 10A AC. 12V / 20A

CompactSwitchPanels Grey White SpareParts ON/OFFrockerswitches 9MK 998003-001 8HG 998514-001 8HG 998514-081

68

Accessories

ContourSeriesSwitchPanelswithCircuitBreakers

4Wayand8Way'Contour'SwitchPanelswithCircuitBreakers Hella marine 'Contour' switch panels offer modern design with integrated circuit breakers and LED backlighting. The grey impact resistant fascia is complimented by a grey marine grade aluminium powder coated base plate. All panels are pre-wired, include mounting screws and are suitable for 12V or 24V systems. Features: - Airpax circuit breakers. - Stylish impact resistant plastic facia covering circuit breakers. - Powder coated aluminium base plate. - Green LED backlit labels. - Red LED light indicates systems on. - Bus bar. - Screws and label set. - Pre-wired.

4WaySwitchPanelwithCircuitBreakers Configuration Dimensions 1 x 5A / 2 x 10A / 1 x 15A 115 x 127 x 65mm (H x W x D)

SwitchPanelswithCircuitBreakers 4way 8HG 998514-011

8WaySwitchPanelwithCircuitBreakers Configuration Dimensions 2 x 5A / 2 x 10A / 3 x 15A / 1 x 20A 200 x 127 x 65mm (H x W x D) 115 x 239 x 65mm (H x W x D)

SwitchPanelswithCircuitBreakers 8wayvertical 8wayhorizontal 8HG 998514-021 8HG 998514-031

www.hellamarine.com

69

Accessories

MicroSeriesSwitchPanels

MicroSwitchPanels Hella marine 'Micro' switch panel modules can be added together horizontally or vertically giving numerous installation options. Each module also has red and green LED backlighting. Circular labels allow vertical, horizontal, left or right mounting. Features: - Switches protected by quality neoprene rubber boots. - Green LED backlit labels. - Red LED light indicates systems on. - Gasket and label set. (9XT 998010-001 comes standard) Dimensions 86 x 58 x 28mm (H x W x D)

Housing DegreeofProtection Switches MaximumLoad MicroSwitchPanels

Impact resistant plastic IP X5 Rocker, momentary or 3 way ON/OFF/ON 12V / 20A

2 x ON/OFF rocker switches 1 x ON/OFF rocker switch, 1 x 3 way momentary switch 1 x ON/OFF rocker switch, 1 x ON/OFF/ON switch

8HG 998514-091 8HG 998514-111 8HG 998514-131

BilgeAlarm 8HG 998514-171 Bilge alarm and bilge pump control panel includes 1 x ON/OFF/ON switch for auto manual control, plus 1 x warning light and alarm for high water level alarm. Same features as modules above.

SystemIndicatorpanel 8HG 998514-151 2 x LED indicators show systems in operation. Same features as modules above.

SpareLabelSets9XT 998010-001 9XT 998010-011 9XT 998010-021

70

Accessories

Fans

2Speed"TurboFans Universal fans from the versatile and well respected Turbo range. Can be turned and pivoted in all directions, and locked in position. - Quality German motor provides very quiet operation. - 150mm diameter fan blade with guard. - High air moving capacity with low power consumption. - Two speed switch in front of the blade guard. - Side, upright or pendant mounting. MaterialDescription Switch Output PowerConsumption Installation Fan"Turbo" 12V Black 24V Black 12V White 8EV 003361-002 8EV 003361-012 8EV 003361-022 Impact resistant plastic Integrated 2 stage rotary Speed 1: 70 litres / sec. Speed 2: 95 litres / sec. 6.5W Pre-wired with 140mm of cable195 188 95

SingleSpeedJetFans Economy fans with similar styling to the popular Turbo models. Can be turned and pivoted in all directions, and locked in position. - 130mm diameter fan blade with guard. - Switch in front of the blade guard. - Side, upright or pendant mounting.

MaterialDescription Switch Output PowerConsumption Installation Fan"Jet" 12V Black 12V White

Impact resistant plastic ON/OFF switch 40 litres / sec. 3.5W Pre-wired with 140mm of cable

155

80

205

8EV 006239-002 8EV 006239-012

www.hellamarine.com

71

Accessories

BatterySwitches275AmpBatteryMasterSwitch Contour Lock system with removable plates for connection from all sides. This allows the switch to be a stand alone unit or locked together with other switches. The control knob cannot be removed whilst in an ON or OFF position, however it can be removed by switching to an anti-clockwise 45 position. Suitable for surface or recess mounting by cutting a 52mm diameter hole. MaterialDescription TerminationStudSize Operation DegreeofProtection Max.Load12/24VDC Impact resistant plastic Tin plated copper studs and nuts 2 x 10mm (3/4") ON / OFF IP 56 Continuous 275 Amps Intermittent 455 Amps (5 minutes) Cranking 1250 Amps (10 seconds)

76 68 48

68

275AmpBatteryMasterSwitch 6EK 998540-001 Spare label set 9XT 998011-001

600AmpBatteryMasterSwitch Contour Lock system with removable plates for connection from all sides. This allows the switch to be a stand alone unit or locked together with battery distribution modules. The control knob cannot be removed whilst in an ON or OFF position, however it can be removed by switching to an anti-clockwise 45 position. Switch can also be padlocked. Suitable for surface or recess mounting by cutting an 85mm diameter hole. MaterialDescription TerminationStudSize Operation DegreeofProtection Max.Load12/24VDC Impact resistant plastic Tin plated copper studs and nuts 2 x 12mm (1/2") ON / OFF IP 56 Continuous 600 Amps Intermittent 800 Amps (5 minutes) Cranking 2500 Amps (10 seconds) 48V DC

102.00

62.00 51.00

90.00

102.00

ON

85.00

OFF

Max.Voltage

89.40

600AmpBatteryMasterSwitch 6EK 998540-061 Spare label set 9XT 998011-001

350AmpBatterySelectorSwitch Contour Lock system with removable plates for connection from all sides. This allows the switch to be a stand alone unit or locked together with battery distribution modules Necessary for on board systems fed from 2 or more batteries and whose supply comes from more than 1 generator. Rotary switch in 4 switch positions of battery 1-2-Both-OFF. Switch can also be padlocked. Suitable for surface or recess mounting by cutting an 85mm diameter hole. MaterialDescription TerminationStudSize Operation DegreeofProtection Max.Load12/24VDC Impact resistant plastic Tin plated copper studs and nuts 3 x 10mm (3/4") 1-2-Both-OFF IP 56 Continuous 350 Amps - B1 or B2 Continuous 500 Amps - B1 and B2 Intermittent 500 Amps (5 minutes) Cranking 1500 Amps (10 seconds) 48V DC

102.00

62.00 51.00

90.00

102.00

ON

85.00

OFF

89.40

Max.Voltage

350AmpBatterySelectionSwitch 6EB 998540-20172

Accessories

BatterySwitchesandBatteryCharger50AmpBatteryMasterSwitch Positive or negative cable can be switched as required. Key can be removed in the OFF position, current interrupted. Saltwater resistant. HousingDescription CableConnection DegreeofProtection Max.Load12/24VDC Impact resistant plastic 2 screw terminals, M10 IP X4 Continuous 50 Amps Cranking 1000 Amps 12V (10 seconds) Cranking 500 Amps 24V (10 seconds) (compliant with VDA 72750)

66 22

40 10

57

50AmpBatteryMasterSwitch 6EK 002843-011 Spare Key 9SL 706729-011

100AmpBatteryMasterSwitch Heavy duty switch for high loads. Key can be removed in the OFF position, current interrupted. Positive or negative cable can be switched as required. HousingDescription CableConnection DegreeofProtection Max.Load12/24VDC Impact resistant plastic Steel key and mounting plate 2 screw terminals, M10 IP X4 Continuous 100 Amps Cranking 5000 Amps 12V (10 seconds) Cranking 2500 Amps 24V (10 seconds) (compliant with VDA 72750)109 10 120 100 58 75 62 10

22

100AmpBatteryMasterSwitch 6EK 001559-001

10AmpAutomatic12VBatteryCharger Intelligent charger offers trickle charging and charging of completely discharged batteries Also suitable for gel batteries Quick charging function (from 7A to 10A) LED status indicator HousingDescription Protection Charging Impact resistant plastic housing Over-charge and reverse polarity protected Charging current 7/10A Charging cut off at 14.3V, Floating charge at 13.8V max. 1A

100AmpAutomatic12VBatteryCharger 8ES 417417-041

Sparelabelsetsforbatterymasterswitches9XT 998011-001

Labelsfor6EK998540-001 All master switches come standard with the battery symbol label. For installations where multiple switches are used it will be necessary to label the switches for different applications.

www.hellamarine.com

73

Accessories

DualBatteryChargingRelay

VSR-DualBatteryChargingRelayWith the increasing installations of more and more electronics on small powerboats, the need arose for a simple device to isolate a second battery and electronics from harmful engine starting spikes. The VSR (Voltage Sensitive Relay) makes this possible while allowing two or more batteries to be charged at the same time. The relay stays open when the engine is first started and remains open during charging until the start battery has reached a preset voltage (13.7V). The relay then closes, allowing the two batteries to be charged together. When the engine is stopped, the voltage returns to normal levels (preset at 12.8V), which allows the relay to open again, separating the two batteries, eliminating the possibility of discharging the start battery. Suitable for use on charging systems up to 100A. Dimensions 69 x 69 x 50mm (W x D x H)

DualBatteryCharging MadeEasy! Ignition Protected

VSR-DualBatteryChargingRelay 4RD 998556-011

ContourDistributionStudAllows termination of heavy duty cables for 1 or more connections. Housed in the Contour Lock single module with removable side plates for connections from all sides using the terminal links below. Cover is supplied with labels for positive or negative applications. StudSize Dimensions ContourDistributionStud 8KV 998547-001 10mm 69 x 69 x 50mm (W x D x H)

DistributionStud,SecondaryBusFitted to Distribution Stud, allows for small wire connections without cluttering main stud. DistributionStud,SecondaryBus 8KV 998548-001

ContourDistributionBus(300Amps)Allows multiple terminations for heavy duty positive or negative connections. Meets ABYC standards for exposed terminals. Housed in the Contour Lock double module with removable side plates for connections from all sides using the terminal links below. StudSize Dimensions CurrentRating 10 x 4mm 138 x 69 x 50mm (W x D x H) 300A

ContourDistributionBus(300Amps) 8KV 998549-001

RigidTerminalLinksSpace saving interconnection of terminals when modules are linked together. RigidTerminalLinks 42.5mm 54.5mm 64.5mm 68.5mm74

Centre Centre Centre Centre

to to to to

Centre Centre Centre Centre

8KV 8KV 8KV 8KV

998554-001 998554-011 998554-021 998554-031

Accessories

CircuitBreakerModules

ContourCircuitBreaker Allows switchable protection for heavy duty circuits such as anchor or davit winches. Uses Bussman Heavy Duty thermal circuit breakers. LED indicates circuit on. Housed in the Contour Lock double module.

Dimensions

138 x 69 x 75mm (W x D x H)

ContourCircuitBreaker-80A 6ET 998551-001 Labels 9XT 998011-011

24HourServiceCircuitBreakerModule Includes 1 x 5 Amp and 3 x 15 Amp 'push to reset' thermal circuit breakers for essential circuits such as bilge pump auto float switch and stereo memory circuits. The push to reset function ensures essential 24 hour circuits cannot be switched off inadvertently. Housed in the Contour Lock double module.

Dimensions

138 x 69 x 75mm (W x D x H)

24HourServiceCircuitBreakerModule6ET 998552-001 Labels 9XT 998011-011

ANLHeavyDutyFuseHolder Allows fusing of heavy duty accessories between 100 - 425A. Meets ABYC Standards for exposed terminals. Housed in the Contour Lock double module with removable side plates for connections from all sides. Dimensions 138 x 69 x 50mm (W x D x H)

ANLHeavyDutyFuseHolder 8JD 998550-001 100 Amp 150 Amp 200 Amp 250 Amp 300 Amp 425 Amp 500 Amp Fuselink Fuselink Fuselink Fuselink Fuselink Fuselink Fuselink 8JS 8JS 8JS 8JS 8JS 8JS 8JS 998016-001 998016-011 998016-021 998016-031 998016-041 998016-501 998016-511

SpareLabelSetsforContourLockmodules9XT 998011-011BILGE PuMP FWD HEAD1 WASTE TREATMENT 2 MEMORY CIRCuITS BILGE PuMP PORT DCMAINS1 SHEET WINCH BILGE PuMP MID HEAD2 WASTE TREATMENT 1 BILGE PuMP STARB DCMAINS2 ANCHOR WINCH DAVIT WINCH BILGE PuMP AFT INVERTER SPARE

HALYARD WINCH SECuRITY SYSTEM

BOW THRuSTER

HOLDING TANK

www.hellamarine.com

75

Accessories

WaterproofPlugsandSockets

WaterResistantPlugsandSocketsChrome plated brass plugs and sockets for exterior or interior installations. Socket includes plastic cap. Plug suitable for cable up to 6.5mm diameter. MaterialDescription MaximumLoad Installation Chrome plated brass housings. Brass contacts 22A at 12V Screw terminals37 25 31 38

WaterResistantPlugsandSockets 2 Pin 3 Pin 4 Pin 8JA 002620-801 8JA 002807-801 8JA 002957-801

ChromePlatedBrassDeckGlandsEnsureswaterproofcableentry.

Cables up to 8mm diameter 9NM 004208-001 18mm high x 32mm base diameter Cables up to 12mm diameter 9NM 004209-001 18mm high x 38mm base diameter

WaterproofPlugsandSocketsWatertight plastic plugs and sockets for exterior or interior installations. Socket includes plastic cap. Plug suitable for cable up to 8.0mm diameter.

MaterialDescription DegreeofProtection MaximumLoad Installation Mounting

Impact resistant plastic housing Silver plated contacts IP 67 2, 3, 4 pin: 16A at 12V 7 pin: 10A at 12V 2, 3, 4 pin: Screw terminals 7 pin: Solder terminals 2, 3, 4 pin: Flush mounting 7 pin: Surface mounting

31 22

33

68

WaterproofPlugsandSockets 2 3 4 7 Pin Pin Pin Pin 8JA 006801-801 8JA 006803-801 8JA 006805-801 8JA 006807-801

SurfaceMountingRing For surface mounting of the socket. Includes stainless steel screws and rubber gasket. 8XT 006 798-001

76

Accessories

LightDimmer

2GroupLightDimmerFeatures: - Precise dimming control for 1 or 2 light groups - Voltage regulation & soft-start bulb protection - Low voltage battery protection - 12V and 24V DC The Hella marine 2 Group Light Dimmer provides precise dimming control for one or two separate light groups, and sophisticated voltage regulation with a soft-start feature to lengthen the life of a filament bulbs. The dimmer also provides low voltage protection against deep battery discharge. When batteries are charged voltage can rise to 14.4V on 12V systems or 28.8V on 24V systems, this can shorten the life of bulbs. The 2 Group Dimmer increases bulb life through sophisticated internal voltage regulation, ensuring the lighting circuit voltage does not rise above 12V or 24V. As halogen bulbs also have a high inrush current on start up, the 2 Group Dimmer features soft-start to further lengthen bulb life. The dimmers low voltage protection also protects against deep battery discharge. Lights will turn off automatically when battery voltage is lower than 9V on a 12V system or lower than 18V on a 99 24V system. Lights can be switched on again when the battery is charged and reaches 12V or 24V respectively.41

Max.Load Max.LoadPergroup InputVoltageRange SystemVoltage NumberofGroups SwitchesPerGroup SwitchType Weight Protections Fuse

200W at 12V and 400W at 24V 89 100W at 12V and 200W at 24V 8 - 30V DC 12V or 24V DC 2 Unlimited Momentary normally open 140 grams Overload, Temperature, Low voltage 2 x 10A

99

41

89

2GroupLightDimmer 5XA 998572-001

FlushMountSignalHorn Compact electric signal horns for flush mounting. - Plastic covers or chrome plated covers. - Saltwater resistant. - Low tone long range sound. Frequency 400Hz.

A-23

ABYC

Voltage PowerConsumption SoundLevel Installation Approvals FlushMountSignalHorn Chrome cover White cover

12V 6 Amps 112 dB 2 flat plug connectors 6.3mm ABYC A-23

79

86

139

98

3FG 998566-001 3FG 998566-011

www.hellamarine.com

77

Accessories

BilgePumps

BilgePumps Hella marine bilge pumps are completely submersible, vibration resistant and maintenance free. Removable base plate allows cleaning of the intake chamber and also serves as a mounting plate. ForreliableoperationandsafetyHellamarinerecommendsthefollowingrulesbefollowed: Use to pump bilge water only. Do not leave permanently submerged in water contaminated with oils or cleaning products. Test regularly. Clean the strainer regularly. Do not use with unreliable float switches. Do not use to compensate for a leaking vessel. Do not use as continuous duty live bait tank pumps.

8TW005342-001 Pumping Capacity Voltage Delivery Head Power Consumption Outlet Hose Internal Diameter Outlet Hose External Diameter 1500 l/h / 400 GPH 12V DC 4.2m 3.5A 13.5mm 20.0mm

HEAD (ft)

111

18 16 14 12 10 8 6 4 2 0 1 2 3 4 5 6 7 8FLOW (Gallon/ Min)

81

8TW005343-001 Pumping Capacity Voltage Delivery Head Power Consumption Outlet Hose Internal Diameter Outlet Hose External Diameter 2300 l/h / 600 GPH 12V DC 5m 5A 13.5mm 20.0mm

HEAD (ft)

128

20 18 16 14 12 10 8 6 4 2 01

88

2 3 4 5 6 7 8 9 10 11 12FLOW (Gallon/ Min)

8TW005344-001 Pumping Capacity Voltage Delivery Head Power Consumption Outlet Hose Internal Diameter Outlet Hose External Diameter 6500 l/h / 1750 GPH 12V DC 4m 10A 25.0mm 30.0mm

8TW005344-011 Pumping Capacity Delivery Head Voltage Power Consumption Outlet Hose Internal Diameter Outlet Hose External Diameter 6500 l/h / 1750 GPH 4m 24V DC 5A 25.0mm 30.0mmHEAD (ft)

164

14 12 10 8 6 4 2 0 3 6 9 12 15 18 21 24 27 30 33FLOW (Gallon/ Min)

119

78