Catalog Industrial Ethernet 2008
-
Upload
onceanu-catalin -
Category
Documents
-
view
190 -
download
0
Transcript of Catalog Industrial Ethernet 2008
Industrial Ethernet Solutions for Control and Automation
0
Solution Tutorial 1-2
EDS-828 1-7
24+4G-port Layer 3 Gigabit modular managed Ethernet switch
EDS-728 1-9
24+4G-port Gigabit modular managed Ethernet switch
IM Series 1-11
Gigabit Ethernet and fast Ethernet interface modules
About Moxa 0-1
Table of Contents 0-9
Solution Spotlights 0-11
Selection Guide 0-15
Applications 0-23
Solution Tutorial 2-2
EDS-G509 2-8
9G-port full Gigabit managed Ethernet switch
EDS-518A 2-10
16+2G-port Gigabit managed Ethernet switch
EDS-510A 2-12
7+3G-port Gigabit managed Ethernet switch
EDS-516A/508A/505A 2-14
16-, 8-, and 5-port managed Ethernet switches
EDS-408A/405A 2-17
8- and 5-port entry-level managed Ethernet switches
PX-1510 2-19
7+3G-port Gigabit PoE managed Ethernet switch
Moxa NMS 2-21
Network management software
EDS-SNMP OPC Server Pro 2-22
OPC server for connecting SNMP devices
SFP-1G Series 2-23
1G-port Gigabit Ethernet SFP modules
Solution Tutorial 3-2
EDS-G308 3-5
8G-port full Gigabit unmanaged Ethernet switch
EDS-P308 3-7
8-port IEEE 802.3af PoE unmanaged Ethernet switch
EDS-305-M12 3-10
5-port M12/IP67 unmanaged Ethernet switch
EDS-316/309/308/305 3-12
16, 9, 8, and 5-port unmanaged Ethernet switches
EDS-208A/205A/208/205 3-15
8 and 5-port entry-level unmanaged Ethernet switches
Solution Tutorial 4-2
PT-7828 4-6
IEC 61850-3 24+4G-port Layer 3 Gigabit modular managed Ethernet switch
PT-7728 4-9
IEC 61850-3 24+4G-port Gigabit modular managed Ethernet switch
PT-7710 4-12
IEC 61850-3 8+2G-port Gigabit modular managed Ethernet switch
PT-7324 4-14
IEC 61850-3 22+2G-port Gigabit smart Ethernet switch
IKS-6726 4-16
24+2G-port Gigabit modular managed Ethernet switch
IKS-6324 4-19
22+2G-port Gigabit unmanaged Ethernet switch
PM-7200 Series 4-21
Gigabit Ethernet and fast Ethernet interface modules
Solution Tutorial 5-2
AWK-3121 5-5
Advanced industrial wireless AP/Bridge/Client
AWK-1200 5-7
Outdoor wireless AP/Bridge or AP Client
AWK-1100 5-9
Industrial wireless AP/Bridge/AP Client
Accessories 5-11
IEEE 802.11a/b/g omni & directional antennas
www.moxa.com emai l : [email protected] 0-9
Table of Contents
Table of Contents
Chapter 0 Overview
Chapter 1 Modular Managed Ethernet Switches
Chapter 3 Unmanaged Ethernet Switches
Chapter 4 Rackmount Ethernet Switches
Chapter 2 Managed Ethernet Switches
Chapter 5 Industrial Wireless Ethernet
2
3
5
4
6
7
8
9
10
11
12
Overview
Wireless
EthernetActive Ethernet I/O
Peer-to-PeerI/O
Modular
Remote I/O
Media
ConvertersAccessories
Ordering Inform
ation
1
Modular
EthernetSwitches
Unmanaged
EthernetSwitches
Rackmount
EthernetSwitches
Managed
EthernetSwitches
VideoNetworkingProducts0
Active Ethernet I/O Tutorial 6-2
ioLogik E2210 6-8
Active Ethernet I/O with 12 DI, 8 DO
ioLogik E2212 6-9
Active Ethernet I/O with 8 DI, 8 DO, 4 DIO
ioLogik E2214 6-10
Active Ethernet I/O with 6 DI, 6 relay outputs
ioLogik E2240 6-11
Active Ethernet I/O with 8 AI, 2 AO
ioLogik E2242 6-12
Active Ethernet I/O with 4 AI, 12 configurable DIO
ioLogik E2260 6-13
Active Ethernet I/O with 6 RTD inputs, 4 DO
ioLogik E2262 6-14
Active Ethernet I/O with 8 TC inputs, 4 DO
Serial Remote I/O Tutorial 6-15
ioLogik R2110 6-16
RS-485 I/O with 12 DI, 8 DO
ioLogik R2140 6-17
RS-485 I/O with 8 AI, 2 AO
Accessories 6-18
Snap-on LCD module
Solution Tutorial 8-2
NA-4010 8-7
Ethernet network adaptor
NA-4020/4021 8-8
RS-485 or RS-232 network adaptors
M-1000 8-9
Digital input modules
M-2000 8-12
Digital output modules
M-3000 8-16
Analog input modules
M-6000 8-18
Temperature input modules
M-4000 8-19
Analog output modules
M-7000 8-20
Power modules
Accessories 8-22
Solution Tutorial 9-2
VPort 25 9-6
Fixed dome IP camera for outdoors
VPort 354 9-9
4-channel MJPEG/MPEG4 industrial video encoder
VPort 351 9-12
1-channel MJPEG/MPEG4 industrial video encoder
VPort 3310 9-15
1-channel MPEG4 industrial video server
VPort 251 9-17
1-channel MJPEG/MPEG4 video encoder
VPort 2141 9-19
4-channel MJPEG video server
VPort D351 9-21
1-channel MJPEG/MPEG4 industrial video decoder
SoftNVR 9-23
Advanced video-over-IP surveillance software
SoftDVR™ Pro 9-24
Video-over-IP surveillance software
VPort SDK 9-26
User-friendly software development kit
IMC-101G 10-2
Industrial Gigabit media converter
IMC-101 10-4
Industrial media converter
IMC-21 10-6
Entry-level industrial media converter
ABC-01 11-1
Industrial RS-232 RJ45-based automatic configuration backup solution
DR Series 11-2
24 or 48 VDC DIN-Rail Power Supply
Mounting Kits 11-3
Wall mounting, rack mounting, and DIN-Rail mounting kits
Fiber Patch Cords 11-4
Multi-mode Optical Fiber Patch Cords
Solution Tutorial 7-2
ioMirror E3210 7-5
Ethernet Peer-to-Peer I/O with 8 DI, 8 DO
Table of Contents
emai l : [email protected] www.moxa.com 0-10
Chapter 6 Active Ethernet I/O
Chapter 7Peer-to-Peer I/O
Chapter 8 Modular Remote I/O Chapter 11
Accessories
Chapter 10 Industrial Media Converters
Chapter 12 Appendix: Product Ordering Information 12-1
Chapter 9Video Networking Products
Industrial Ethernet Solutions for Control and Automation
0
www.moxa.com emai l : [email protected] 0-11
Modular Ethernet SwitchesEDS-828/728 Series
Layer 3 switching functionality (EDS-828)Up to 4 Gigabit and 24 fast Ethernet ports with copper or fiber optic connectors High fault-tolerance redundancy with Gigabit Turbo RingQoS, IGMP snooping/GMRP, VLAN, LACP, SNMPv1/v2c/v3, RMON supportedIEEE 802.1X, HTTPS, and SSH to enhance network security
Full Gigabit Ethernet SwitchesEDS-G509/G308 Series
Compact full Gigabit Ethernet switch for high performanceFiber optic options for extending distance and electrical noise immunityTurbo Ring, RSTP/STP for Ethernet redundancy (EDS-G509)QoS, IGMP snooping/GMRP, VLAN, LACP, SNMPv1/v2c/v3, RMON, IEEE 802.1X, HTTPS, and SSH supported (EDS-G509)-40 to 75˚C operating temperature range
Network Management SoftwareMoxa NMS
Auto-Discovery to create topology mapVarious trending graphs to generate performance reportsFault management system to monitor network anomaliesRemotely accessible through user-friendly web UI
Moxa is proud to provide one-stop shopping for industrialEthernet infrastructure solutions, which include Gigabitmodular Ethernet switches, (Gigabit) managed Ethernetswitches, unmanaged Ethernet switches, and user-friendlynetwork management software. Moxa’s industrial Ethernetswitches provide optimal performance in harsh, industrialenvironments, and emphasize high reliability by supporting
features such as industrial-grade certifications (e.g., Class 1, Div.2/Zone 2, DNV, GL) for hazardous environments, built-in fiberfor remote connections, and extended operating temperaturemodels (-40 to 75˚C) for critical industrial applications.
2
3
5
4
6
7
8
9
10
11
12
Overview
Wireless
EthernetActive Ethernet I/O
Peer-to-PeerI/O
Modular
Remote I/O
Media
ConvertersAccessories
Ordering Inform
ation
1
Modular
EthernetSwitches
Unmanaged
EthernetSwitches
Rackmount
EthernetSwitches
Managed
EthernetSwitches
VideoNetworkingProducts0
Features
emai l : [email protected] www.moxa.com 0-12
The PowerTrans series of Ethernet switches features the highest level of reliability and availability for substation communications. Take advantage of superior EMI/RFI shielding, a -40 to 85°C operating range, and redundant media and power for challenging substation environments. Maximum flexibility is achieved with a ruggedized, modular, rackmount design that provides a high
density of optical fiber ports and Gigabit ports. The PowerTrans switches are suitable for retrofitting existing networks, and for creating new substation networks.
IEC 61850-3 and IEEE 1613 compliant
Meets NEMA TS2, EN50155, EN50121-4 standards
Layer 2 and Layer 3 modular, rack-mountable switches for a scalable network solution
Faster network fault recovery (under 20 milliseconds)
Universal 24/48 VDC or 110/220 VDC/VAC redundant power supply
Modular design for flexible media combinations
Up to 22 fiber ports for EMI immunity and long-haul transmission
Fan-less cooling design, -40 to 85°C operating range
Layer 3 Modular Ethernet SwitchesPT-7828 24+4G-port
Modular Ethernet SwitchesPT-7710 8+2G-port
Modular Ethernet SwitchesPT-7728 24+4G-port
Smart Ethernet SwitchesPT-7324 22+2G-port
Industrial Ethernet Solutions for Control and Automation
0
www.moxa.com emai l : [email protected] 0-13
Active Ethernet I/OioLogik E2000 Series
Instant event reporting by TCP/UDP/e-mail/SNMP trap
Patented Click&Go logic for easy local control without programming
API for VB (Windows) and C (Windows, WinCE, Linux)
Peer-to-Peer I/O without network controller
Variety I/O type and combination
Peer-to-Peer I/OioMirror E3210
Remote digital input mapped to local digital output over Ethernet
High speed peer-to-peer I/O
Quick and easy utility and web-based settings
Local alarm and remote alarm message
Modbus/TCP for remote monitoring
Modular Remote I/OioLogik 4000 Series
Full rage of digital and analog I/O modules
Expandable up to a maximum of 512 DIOs or 124 AIOs
Modular package for fast swap and maintenance
Standard Modbus/TCP/RTU/ASCII
Easy-to-use DLL library for user programming
Active Ethernet I/O is a new concept that upgrades PC-based data acquisition and control to proactive, automatic, condition-based reporting and control over networked I/O devices. This report-by-exception approach, which is new to PC-based I/O monitoring, requires far less bandwidth than traditional polling methods. The innovative features of Active Ethernet I/O make network communication between the host computer and Ethernet I/O server concise and efficient. You can expect your data
transmission speed to increase 20-fold compared to traditional SCADA systems, and critical sensor data can be obtained immediately without being subject to polling intervals. These great features make Active Ethernet I/O particularly well-suited to applications that require widely distributed I/O points.
2
3
5
4
6
7
8
9
10
11
12
Overview
Wireless
EthernetActive Ethernet I/O
Peer-to-PeerI/O
Modular
Remote I/O
Media
ConvertersAccessories
Ordering Inform
ation
1
Modular
EthernetSwitches
Unmanaged
EthernetSwitches
Rackmount
EthernetSwitches
Managed
EthernetSwitches
VideoNetworkingProducts0
emai l : [email protected] www.moxa.com 0-14
Industrial Video ServersVPort 351 Series
Industrial design with -40 to 75˚C operating temperature and fiber optic Ethernet portUp to 30 frames/sec at full D1 (720 x 480) resolutionPre/post-alarm video recording function2-way (1 in/1 out) audio supported Class 1, Div. 2 certified for use in hazardous locations (Pending)
IP CameraVPort 25 Series
-40 to 50˚C operating temperature IP66-rated for protection from rain and dustOne camera lens for both day and night useDirect-wired power input and PoE for power redundancyUp to 30 frames/sec at 720 x 480 resolution
IP Surveillance SoftwareSoftNVR
Up to 64 channels in one systemDual monitor display capability for convenient viewingVideo analysis with motion and video loss detectionMultifunction playback system with intelligent searchLive viewing from all popular web browsers
Moxa’s VPort series of video networking solutions, which includes IP cameras and industrial video servers, are said to be the most robust in the industry for use in industrial and outdoor applications. These extremely compact video products can operate in a wide temperature range of -40 to 50°C or -40 to 75°C, and provide a rugged solution for a variety of harsh environments to ensure the reliability of your entire video system.
The industrial design and wide temperature range make the VPort series of industrial video networking products ideal solutions for video surveillance applications in facility management, unmanned substations, and transportation field sites.
Industrial Ethernet Solutions for Control and Automation
0
Industrial Ethernet Solutions for Control and Automation
0
www.moxa.com emai l : [email protected] 0-15
Modular Ethernet Switches Managed Ethernet Switches Unmanaged Ethernet Switches
3 Gigabit 8 Gigabit PoE M12/IP67Layer 3 4 Gigabit 9 Gigabit 2 Gigabit 3 Gigabit
Model Name EDS-828 EDS-728 EDS-G509 EDS-518A EDS-516A EDS-510A EDS-508A EDS-505A EDS-408A/405A PX-1510 EDS-G308 EDS-P308 EDS-305-M12 EDS-316 EDS-309 EDS-308 EDS-305 EDS-208A/205A EDS-208/205
Modular design
Gigabit Ethernet Module √ √
Fast Ethernet Module √ √
Number of Ports
Total Number of Ports 28 28 9 18 16 10 8 5 8/5 10 8 8 5 16 9 8 5 8/5 8/5
Gigabit Ethernet, 10/100/1000Mbps 4 4 9 2 3 3 8
Max. 10/100/1000BaseT(X) 4 4 9 2 3 3 8
Max. 1000BaseSX/LX/LHX/ZX 4 4 5 2 3 3 2
Fast Ethernet, 10/100Mbps 24 24 16 16 7 8 5 8/5 7 7 8 5 16 9 8 5 8/5 8/5
Max. 10/100BaseT(X) 24 24 16 16 7 8 5 8/5 3 4 16 6 8 5 8/5 8/5
Max. 100BaseFX 24 24 2 2 2 2 2/2 2 2 3 2 1 1/--- 1/---
Max. Fast Ethernet,10/100Mbps, PoE 4 4
Max. Fast Ethernet, 10/100Mbps, M12/IP67 5
Power supply
24 VDC (12 to 45 VDC) √ √ √ √ √ √ √ √ √ √ √ √
24 VAC (18 to 30 VAC) √ √ √ √ √
24 VDC (12 to 48 VDC) √ √
48 VDC (46 to 50 VDC) √ √
12/24/48 VDC (9.6 to 60 VDC) √ √ √
Installation
DIN-Rail Mounting √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √
Panel Mounting √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √
Operating temperature
0 to 60˚C √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √
-10 to 60˚C √ √
-40 to 75˚C √ √ √ √ √ √ √ √ √ √ √ √ √ √ √
Redundancy
Turbo Ring (Recovery Time < 20 ms) √ √ √ √ √ √ √ √ √ √
STP/RSTP √ √ √ √ √ √ √ √ √ √
Automatic Backup Configurator, ABC-01 √ √ √ √ √ √ √ √ √ √
Network management and control
Static Routing √
RIP V1/V2 √
IGMP/GMRP √ √ √ √ √ √ √ √ √
Port Trunking √ √ √ √ √ √ √ √ √
IEEE802.1X √ √ √ √ √ √ √ √ √
Port Lock √ √ √ √ √ √ √ √ √
SNMP/RMON √ √ √ √ √ √ √ √ √ √
VLAN √ √ √ √ √ √ √ √ √ √
QoS √ √ √ √ √ √ √ √ √ √
Relay Warning √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √
Regulatory approvals
CE/FCC √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √
UL/cUL 60950-1 √ √ √ √ √ √ √ √ √ √ √/---
UL508 √ √ √ √ √ √ √ √ √ √ √ √
Class 1, Div. 2/ATEX Class 1, Zone 2 √ / √ / √ / √ / √/ √/ √
DNV/GL √ √ √ √ √ √ √ √ √ √
Selection Guide
Available Pending
Industrial Ethernet Switches Selection Guide
Industrial Ethernet Switches
2
3
5
4
6
7
8
9
10
11
12
Overview
Wireless
EthernetActive Ethernet I/O
Peer-to-PeerI/O
Modular
Remote I/O
Media
ConvertersAccessories
Ordering Inform
ation
1
Modular
EthernetSwitches
Unmanaged
EthernetSwitches
Rackmount
EthernetSwitches
Managed
EthernetSwitches
VideoNetworkingProducts0Industrial Ethernet SwitchesSelection Guide
emai l : [email protected] www.moxa.com 0-16
Modular Ethernet Switches Managed Ethernet Switches Unmanaged Ethernet Switches
3 Gigabit 8 Gigabit PoE M12/IP67Layer 3 4 Gigabit 9 Gigabit 2 Gigabit 3 Gigabit
Model Name EDS-828 EDS-728 EDS-G509 EDS-518A EDS-516A EDS-510A EDS-508A EDS-505A EDS-408A/405A PX-1510 EDS-G308 EDS-P308 EDS-305-M12 EDS-316 EDS-309 EDS-308 EDS-305 EDS-208A/205A EDS-208/205
Modular design
Gigabit Ethernet Module √ √
Fast Ethernet Module √ √
Number of Ports
Total Number of Ports 28 28 9 18 16 10 8 5 8/5 10 8 8 5 16 9 8 5 8/5 8/5
Gigabit Ethernet, 10/100/1000Mbps 4 4 9 2 3 3 8
Max. 10/100/1000BaseT(X) 4 4 9 2 3 3 8
Max. 1000BaseSX/LX/LHX/ZX 4 4 5 2 3 3 2
Fast Ethernet, 10/100Mbps 24 24 16 16 7 8 5 8/5 7 7 8 5 16 9 8 5 8/5 8/5
Max. 10/100BaseT(X) 24 24 16 16 7 8 5 8/5 3 4 16 6 8 5 8/5 8/5
Max. 100BaseFX 24 24 2 2 2 2 2/2 2 2 3 2 1 1/--- 1/---
Max. Fast Ethernet,10/100Mbps, PoE 4 4
Max. Fast Ethernet, 10/100Mbps, M12/IP67 5
Power supply
24 VDC (12 to 45 VDC) √ √ √ √ √ √ √ √ √ √ √ √
24 VAC (18 to 30 VAC) √ √ √ √ √
24 VDC (12 to 48 VDC) √ √
48 VDC (46 to 50 VDC) √ √
12/24/48 VDC (9.6 to 60 VDC) √ √ √
Installation
DIN-Rail Mounting √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √
Panel Mounting √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √
Operating temperature
0 to 60˚C √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √
-10 to 60˚C √ √
-40 to 75˚C √ √ √ √ √ √ √ √ √ √ √ √ √ √ √
Redundancy
Turbo Ring (Recovery Time < 20 ms) √ √ √ √ √ √ √ √ √ √
STP/RSTP √ √ √ √ √ √ √ √ √ √
Automatic Backup Configurator, ABC-01 √ √ √ √ √ √ √ √ √ √
Network management and control
Static Routing √
RIP V1/V2 √
IGMP/GMRP √ √ √ √ √ √ √ √ √
Port Trunking √ √ √ √ √ √ √ √ √
IEEE802.1X √ √ √ √ √ √ √ √ √
Port Lock √ √ √ √ √ √ √ √ √
SNMP/RMON √ √ √ √ √ √ √ √ √ √
VLAN √ √ √ √ √ √ √ √ √ √
QoS √ √ √ √ √ √ √ √ √ √
Relay Warning √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √
Regulatory approvals
CE/FCC √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √
UL/cUL 60950-1 √ √ √ √ √ √ √ √ √ √ √/---
UL508 √ √ √ √ √ √ √ √ √ √ √ √
Class 1, Div. 2/ATEX Class 1, Zone 2 √ / √ / √ / √ / √/ √/ √
DNV/GL √ √ √ √ √ √ √ √ √ √
Industrial Ethernet Solutions for Control and Automation
0
www.moxa.com emai l : [email protected] 0-17
Rackmount Ethernet Switches
Layer 3 4 Gigabit 2 Gigabit 2 Gigabit 2 Gigabit 2 Gigabit
Model Name PT-7828 PT-7728 PT-7710 PT-7324 IKS-6726 IKS-6324
Layer 3
Static Routing √
RIP V1/V2 √
Modular design
Gigabit Ethernet module √ √ √ √ √ √
Fast Ethernet module √ √ √ √ √ √
Number of Ports
Total Number of Ports 28 28 10 24 26 24
Gigabit Ethernet, 10/100/1000Mbps 4 4 2 2 2 2
Max. 10/100/1000BaseT(X) 4 4 2 2 2 2
Max. 1000BaseSX/LX/LHX/ZX 4 4 2 2 2 2
Fast Ethernet, 10/100Mbps 24 24 8 24 24 24
Max. 10/100BaseT(X) 24 24 0/2/4/8 22 24 22
Max. 100BaseFX 18 18 8 2 16 2
Power supply
24 VDC (18 to 36 VDC), isolated √ √ √
48 VDC (36 to 72 VDC), isolated √ √ √
24/48 VDC (9 to 60 VDC) √ √ √
88-300 VDC or 85-264 VAC, isolated √ √ √ √ √ √
Installation
Rack mounting √ √ √ √ √ √
Wall Mounting √
Operating temperature
-40 to 85˚C √ √ √ √
-40 to 75˚C √ √
Redundancy
Turbo Ring √ √ √ √
STP/RSTP √ √ √ √
Automatic Backup Configurator, ABC-01 √ √ √ √
Network management and control
Web broswer √ √ √ √ √
Window Utility Setting √ √ √ √
IGMP/GMRP √ √ √ √
Port Trunking √ √ √ √
IEEE802.1X √ √ √ √
Port Lock √ √ √ √
SNMP/RMON √ √ √ √
802.1Q VLAN √ √ √ √
Port-based VLAN √ √ √
QoS √ √ √ √ √
Regulatory approvals
CE/FCC √ √ √ √ √ √
UL/cUL 60950-1
EMC Complince
IEC 61850-3 (Power Substation)
IEEE 1613 (Power Substation)
NEMA TS2 (Traffic Control System) √ √ √ √ √ √
EN 50121-4 (Railway Applications)
DNV/GL
Available Pending
Selection GuideIndustrial Ethernet Sw
itches
2
3
5
4
6
7
8
9
10
11
12
Overview
Wireless
EthernetActive Ethernet I/O
Peer-to-PeerI/O
Modular
Remote I/O
Media
ConvertersAccessories
Ordering Inform
ation
1
Modular
EthernetSwitches
Unmanaged
EthernetSwitches
Rackmount
EthernetSwitches
Managed
EthernetSwitches
VideoNetworkingProducts0Industrial Wireless EthernetSelection Guide
emai l : [email protected] www.moxa.com 0-18
Industrial Wireless Ethernet Selection GuideIndustrial Wireless Ethernet
Model Name AWK-3121 AWK-1200-AP AWK-1200-AC AWK-1100
WLAN
IEEE 802.11g/b (wireless LAN) √ √ √ √IEEE 802.3u (10/100M Ethernet LAN) √ √ √ √IEEE 802.3af (Power-over-Ethernet) √ √ √ √IEEE 802.1d (Spanning Tree Protocol) √Frequency 2.4 and 5 GHz 2.4 GHz
Modulation
11b: DBPSK, DQPSK, CCK11g: OFDM with BPSK, QPSK, 16QAM,64QAM11a: OFDM with BPSK, QPSK, 16QAM,64QAM
11b: DBPSK, DQPSK, CCK11g: OFDM
Channels
11b/g: US: 11 channelsEU: 12 channelsJP: 14 channels
11a: US: 12 channelsEU: 19 channelsJP: 19 channels
US: 11 channelsEU: 12 channelsJP: 14 channels
Security64-bit and 128-bit WEP encryption, WPA/WPA2 (IEEE 802.1X/RADIUS and TKIP),Hide SSID
WEP, WPA, WPA2, IEEE 802.1X, MAC address fi ltering, Hide SSID
64-bit and 128-bit WEPencryption, WPA
64-bit and 128-bit WEPencryption, WPA (IEEE 802.1X/RADIUS and TKIP), Hide SSID
802.11b Data Rates (Mbps) 1, 2, 5.5, 11
802.11g Data Rates (Mbps) 6, 9, 12,18, 24, 36, 48, 54
802.11a Data Rates (Mbps) 6, 9, 12,18, 24, 36, 48, 54
Confi gurationWeb-based management
Console managementWeb-based management
Interface
Antenna2 dBi dual-band omni-directional antennawith an RP-SMA connector
5 dBi External / N-typeconnector
9 dBi Internal 2 dBi omni-directional antennawith an RP-SMA connector
RJ45 Port 10/100BaseT(X) auto negotiation
Alarm Contact √
Digital Inputs 2
Console RS-232 (RJ45)
Power Requirements
Power Input ±12-48 VDC or 48 VDC (PoE) 48 VDC (PoE) 48 VDC (PoE) 12-45 VDC or 48 VDC (PoE)
Number of Power Inputs 3 1 1 3
Overload Current Protection √ √
Reverse Polarity Protection √ √
Physical Characteristics
Casing metal, IP30 protection IP68 protection IP67 protection metal, IP30 protection
Dimensions53.6 x 135 x 105 mm
(2.11 x 5.31 x 4.13 in.)284.4 x 254.3 x 77.5 mm(11.20 x 10.01 x 3.05 in.)
165.8 x 195.8 x 60.3 mm(6.53 x 7.71 x 2.37 in.)
53.6 x 135 x 105 mm(2.11 x 5.31 x 4.13 in.)
Installation Options DIN-Rail mounting, wall mounting Wall or Mast Mounting Wall or Mast Mounting DIN-Rail mounting, wall mounting
Environmental Limits
Operating TemperatureStandard models: 0 to 60°C (32 to 140°F)Wide Temp. Models: -40 to 75°C (-40 to167°F)
-20 to 70°C (-4 to 158°F) 0 to 60°C (32 to 140°F)
Storage Temperature -40 to 85°C (-40 to 185°F) -40 to 80°C (-40 to 176°F)-20 to 70°C (-4 to 158°F)(2.11 x 5.31 x 4.13 in.)
Ambient Relative Humidity 5% to 95% (non-condensing)
Regulatory Approval
CE √ √ √ √
FCC √ √ √ √
SafetyEN60950-1: 2001, UL60950-1, UL508,
UL2043 (pending)EN60950-1: 2001, UL60950-1
Hazardous LocationUL/cUL Class I, Division 2, Groups A, B, C,and D (pending); ATEX Class I, Zone 2, Ex nC IIC (pending)
UL/cUL Class I, Division 2, GroupsA, B, C and D; ATEX Class I, Zone 2, Ex nC IIC (pending)
Radio EN300 328-1/-2
EMC EN301 489-1/-17
EMI FCC Part 15.247
Reliability
Warranty 5 years (see www.moxa.com/warranty)
Available Pending ▲ Optional kit buying is required
Industrial Ethernet Solutions for Control and Automation
0
www.moxa.com emai l : [email protected] 0-19
Model Name ioLogik E2210 ioLogik E2212 ioLogik E2214
Digital Input
Channels 12 8 6
Modes DI or Event Counter
Dry Contact Yes
Wet Contact Source Type, 24 VDCSource/sink selectable,
24 VDCSource/sink selectable,
24 VDC
COM 1 2 2
Isolation 3K VDC/2K Vrms
Digital Output
Channels 8 8 6 Relay Output, Normal Open
Modes DO or Pulse Output DO or Pulse Output DO or Pulse Output
Current 200 mA/channel 200 mA/channel
Contact rating 5A/30 VDC, 5A/240 VAC, 5A/110 VAC
Inductance Load : 2AResistance Load : 5A
Protection Over current limit, over temperature shutdown
Configurable DI/DO
Channels - 4 -
Common Specifications
Interface 10/100Mbps Ethernet
Protocols Modbus/TCP, Bootp, DHCP, SNMP, HTTP, SNTP
Security IP filtering
LCD display Optional, hot-pluggable
Software Management
Click&Go Logic
Yes
Physical Characteristics
Dimension (W x H x D)
120.3 x 79 x 40.39 mm
Installation DIN-Rail mounting
Active Ethernet I/O Selection Guide
Selection Guide
Model Name ioLogik E2240
Analog Input
Channels 8, differential
Resolution 16-bit
Modes±150 mV, ±500 mV, ±5V, ±10V,
0 to 20 mA, 4 to 20 mA
Sampling RateVoltage: 10 sample/sec Current: 6 sample/sec
Isolation 3K VDC/2K Vrms
Analog Output
Channels 2
Resolution 12-bit
Modes 0 to 10V, 4 to 20 mA
Accuracy+/- 0.1% FSR @ 25˚C
+/- 0.3% FSR @ -10 & 60˚C
Common Specifications
Interface 10/100Mbps Ethernet
ProtocolsModbus/TCP, Bootp, DHCP,
SNMP, HTTP, SNTP
Security IP filtering
LCD display Optional, hot-pluggable
Software Management
Click&Go Logic Yes
Physical Characteristics
Dimension (W x H x D)
120.3 x 79 x 40.39 mm
Installation DIN-Rail mounting
Model Name ioLogik E2242
Analog Input
Channels 4, differential
Resolution 16-bit
Modes ±150 mV, ±500 mV, ±5V, ±10V,
0 to 20 mA, 4 to 20 mA
Sampling Rate 100 sample/sec
Isolation 3K VDC/2K Vrms
Digital Input
Modes DI or Event Counter
Dry Contact Yes
Wet ContactSource/sink selectable,
24 VDC
COM 2
Isolation 3K VDC/2K Vrms
Digital Output
Mode DO or Pulse Output
Current 200 mA/channel
ProtectionOver current limit,
over temperature shutdown
Configurable DI/DO
Channels 12
Common Specifications
Interface 10/100Mbps Ethernet
ProtocolsModbus/TCP, Bootp, DHCP,
SNMP, HTTP, SNTP
Security IP filtering
LCD display Optional, hot-pluggable
Software Management
Click&Go Logic Yes
Physical Characteristics
Dimension(W x H x D)
120.3 x 79 x 40.39 mm
Installation DIN-Rail mounting
Active Ethernet I/O
Active Ethernet I/O
2
3
5
4
6
7
8
9
10
11
12
Overview
Wireless
EthernetActive Ethernet I/O
Peer-to-PeerI/O
Modular
Remote I/O
Media
ConvertersAccessories
Ordering Inform
ation
1
Modular
EthernetSwitches
Unmanaged
EthernetSwitches
Rackmount
EthernetSwitches
Managed
EthernetSwitches
VideoNetworkingProducts0Active Ethernet I/OSelection Guide
emai l : [email protected] www.moxa.com 0-20
Active Ethernet I/O
Model Name ioLogik E2260 ioLogik E2262
Input
Channels 6 RTD 8, Thermocouple
Resolution 16-bit 16-bit
Modes PT, JPT, Ni, and Resistor J, K, T, E, R, S, B, N
Sampling Rate
12 sample/sec 10 sample/sec
Accuracy+/- 0.1% FSR @ 25˚C
+/- 0.3% FSR @ -10 & 60˚C+/- 0.1% FSR @ 25˚C
+/- 0.3% FSR @ -10 & 60˚C
Isolation 3K VDC/2K Vrms
Output
Channels 4 4
Modes D/O or Pulse Output D/O or Pulse Output
Current 200 mA/channel 200 mA/channel
ProtectionOver current limit,
over temperature shutdown
Common Specifications
Interface 10/100Mbps Ethernet
Protocols Modbus/TCP, Bootp, DHCP, SNMP, HTTP, SNTP
Security IP filtering
LCD display Optional, hot-pluggable
Software Management
Click&Go Logic
Yes
Physical Characteristics
Dimension (W x H x D)
120.3 x 79 x 40.39 mm
Installation DIN-Rail mounting
Serial Remote I/O
Model Name ioLogik R2110 Model Name ioLogik R2140
Digital Input Analog Input
Channels 12 Channels 8
Modes D/I or Event Counter Resolution 16-bit
Dry Contact Yes Modes ±150 mV, ±500 mV, ±5V, ±10V,
0 to 20 mA, 4 to 20 mA
Wet Contact Source Type, 24 VDCSampling Rate
Voltage: 10 sample/secCurrent: 6 sample/sec
Isolation 3K VDC/2K Vrms Isolation 3K VDC/2K Vrms
Digital Output Analog Output
Channels 8 Channels 2
Modes DO or Pulse Output Resolution 12-bit
Current 200 mA/channel Modes 0 to 10V, 4 to 20 mA
ProtectionOver current limit,
over temperature shutdownAccuracy
+/- 0.1% FSR @ 25˚C+/- 0.3% FSR @ -10 & 60˚C
Common Specifications Common Specifications
InterfaceRS-485 (2-wire)
From 1200 to 115, 200KbpsInterface
RS-485 (2-wire) From 9600 to 115, 200Kbps
Protocols Modbus/RTU Protocols Modbus/RTU
LCD display Optional, hot-pluggable LCD display Optional, hot-pluggable
Physical Characteristics Physical Characteristics
Dimension (W x H x D)
120.3 x 79 x 40.39 mmDimension(W x H x D)
120.3 x 79 x 40.39 mm
Installation DIN-Rail mounting Installation DIN-Rail mounting
Peer-to-Peer I/O
Model Name ioMirror E3210
Digital Input
Channels 12
Modes Digital Input
Dry Contact Yes
Wet Contact Source Type, 24 VDC
Isolation 3K VDC/2K Vrms
Digital Output
Channels 8
Modes Digital Output
Current 200 mA/Channel
ProtectionOver current limit,
over temperature shutdown
Common Specifications
Interface 10/100Mbps Ethernet
ProtocolsModbus/TCP, Bootp, DHCP,
HTTP, SNTP
Security IP filtering
LCD displayOptional, hot-pluggable
attachement
Software Management
ioMirror Yes
Physical Characteristics
Dimension(W x H x D)
120.3 x 79 x 40.39 mm
Installation DIN-Rail mounting
Industrial Ethernet Solutions for Control and Automation
0
www.moxa.com emai l : [email protected] 0-21
Selection Guide
Industrial Video Servers IP Camera
Model Name VPort 351 VPort 3310 VPort D351 VPort 251 VPort 2141 VPort 25
Type Encoder Encoder Decoder Encoder Encoder Fixed Dome IP Camera
Channel Number
Video Input 1 1 0 1 4 0
Video Output 1 1 1 0 0 1
Aduio Input 1 1 1 1 0 1
Audio Output 1 0 1 1 0 1
Algorithmn
MJPEG √ √ (Decode) √ √ √
MPEG4 √ √ √ (Decode) √ √
Video Performance
QCIF (NTSC: 176 x 120, PAL: 176 x 144) max. 30 FPS max. 30 FPS
QVGA (NTSC: 320 x 240, PAL: 320 x 288) max. 30 FPS max. 30 FPS max. 30 FPS max. 30 FPS
CIF (NTSC: 352 x 240, PAL: 352 x 288) max. 30 FPS max. 30 FPS max. 30 FPS max. 30 FPS max. 30 FPS max. 30 FPS
VGA (NTSC: 640 x 480, PAL: 640 x 576) max. 30 FPS max. 10 FPS max. 30 FPS max. 30 FPS max. 30 FPS
4CIF (NTSC: 704 x 480, PAL: 704 x 576) max. 30 FPS max. 10 FPS max. 30 FPS max. 30 FPS max. 10 FPS max. 30 FPS
Full D1 (NTSC: 720 x 480, PAL: 720 x 576) max. 30 FPS max. 30 FPS max. 30 FPS max. 30 FPS
Quad View max. 10 FPS
Network Connection
10/100BaseT(X) √ √ √ √ √ √
100BaseFX √
COM Port
COM Port for PTZ Control 1 1 1 1 2 1
RS-232 Console Port 1 0 1 1 0 0
Alarm
VMD (Video Motion Detection) √ √ N/A √ √ √
Digital Input 2 2 2 1 4 1
Relay (Digital) Output 2 2 2 1 4 1
Alarm Recorded Video √ N/A
Alarm Snapshot Image √ √ N/A √ √ √
Operating Temperature
0 to 60˚C℃ √ √ √ √ √
-40 to 75˚C℃ √ √ -40 to 50˚C
Power
Power Input 2 (Redundant) 2 (Redundant) 2 (Redundant) 1 2 1
Power Output 0 0 0 1 (Loop) 1 0
Power-over-Ethernet √
Network Management and Control
Web Broswer √ √ √ √ √ √
SNMP Protocols √ √ √ √ √
RTSP (Real Time Streaming Protocol) √ √ √ √ √
Multicast (IGMP) √ √ N/A √ √
UPnP √ √ √ √ √ √
DDNS √ √ √ √ √
PPPoE √ √
IP Filtering √ √ √ √ √ √
Form Factor
Harden Protection IP30 IP30 IP30 N/A N/A IP66
DIN-Rail Monuting √ √ √ ▲ ▲Pannel Mounting ▲ ▲ ▲ √ √ √
Regulatory Approvals
CE/FCC √ √ √ √ √ √
UL508 √ √
Class 1, Div 2/ATEX Class 1, Zone 2
Available Pending ▲ Optional kit buying is required
Video Networking Products Selection Guide
Video Netw
orking Products
2
3
5
4
6
7
8
9
10
11
12
Overview
Wireless
EthernetActive Ethernet I/O
Peer-to-PeerI/O
Modular
Remote I/O
Media
ConvertersAccessories
Ordering Inform
ation
1
Modular
EthernetSwitches
Unmanaged
EthernetSwitches
Rackmount
EthernetSwitches
Managed
EthernetSwitches
VideoNetworkingProducts0Industrial Media ConvertersSelection Guide
emai l : [email protected] www.moxa.com 0-22
Ethernet to Fiber Converters
Gigabit
Model Name IMC-101G IMC-101 IMC-21 100Mega IMC-21 10Mega
Number of Ports
Total Number of Ports 2 2 2 2
Gigabit Ethernet, 10/100/1000Mbps 2
Max. 10/100/1000BaseT(X) 1
Max. 1000BaseSX/LX/LHX/ZX 1
Fast Ethernet, 10/100Mbps 2 2
Max. 10/100BaseT(X) 1 1
Max. 100BaseFX 1 1
Ethernet, 10Mbps 2
Max. 10BaseT 1
Max. 10BaseFL 1
Power supply
24 VDC (12 to 45 VDC) √ √ √
24 VDC (12 to 48 VDC) √
24 VAC (18 to 30 VAC) √ √
Installation
DIN-Rail Mounting √ √ √ √
Panel Mounting √ √
Operating temperature
0 to 60˚C √ √
-10 to 60˚C √ √
-40 to 75˚C √ √
Network management
Relay Warning √ √
Regulatory approvals
CE/FCC √ √ √ √
UL/cUL 60950-1 √ √ √
UL508 √ √ √ √
UL/cUL Class 1, Div. 2 , ATEX Class 1, Zone 2 √
DNV/GL √
Available Pending
Industrial Media Converters Selection Guide
Industrial Ethernet Solutions for Control and Automation
0
www.moxa.com emai l : [email protected] 0-23
Power Automation
Why Moxa?
IEC 61850-3 and IEEE 1613 compliant for challenging and high-•voltage substations.Turbo Ring media redundancy with faster ring recovery (< 20 ms at •250 Ethernet switches).Redundant power inputs at 24/48 VDC or 110/220 VDC/VAC.•Completely fan-less design in a -40 to +85ºC operating temperature •range and 19-inch rackmount installation.Versatile mixed-media modules with up to 22 fiber ports (18+4G •ports) for long-haul transmission and scalable Gigabit bandwidth.Layer 3 Ethernet switches support IP routing protocols for complex •T&D automation networks.
Network Requirements
Network devices that comply with IEC 61850-3 or IEEE 1613 •standards for best EMI shielding and error free communications.A redundant Ethernet infrastructure with secure data communication.•Fiber optic cabling for noise immunity, long-distance transmission, •and scalable bandwidth for future upgrades.Layer 3 routing capability for better network performance within •large-scale substation LANs.
IEC 61850-3 Compliant Communication Networks
A reliable and intelligent network is a key success factor for modern substation automation. Substations that transmit and distribute electric power over expansive territories are often located out of doors in areas subjected to high electromagnetic interference and extreme temperature conditions. The substation infrastructure must be capable of providing EMI protection, network redundancy, great reliability, and flexible deployment options for for high network availability and future upgrades.
In addition to reliability, coordination between the many standards and proprietary protocols used in substations is also a major requirement in developing power automation systems. To build standard communication protocols between different intelligent electronic devices (IEDs), the IEC 61850 communication standards must be deployed based on Ethernet technology for better extensibility and interoperability.
Key Products
Fiber Optic Cable
PT-7710 8+2G-port Rackmount Gigabit Modular Ethernet Switch
PT-7324 22+2G-port Rackmount Gigabit Smart Ethernet Switch
PT-7828 Layer 3 24+4G-port Rackmount Gigabit Modular Ethernet Switch
PT-7728 24+4G-port Rackmount Gigabit Modular Ethernet Switch
Power Autom
ationApplication
2
3
5
4
6
7
8
9
10
11
12
Overview
Wireless
EthernetActive Ethernet I/O
Peer-to-PeerI/O
Modular
Remote I/O
Media
ConvertersAccessories
Ordering Inform
ation
1
Modular
EthernetSwitches
Unmanaged
EthernetSwitches
Rackmount
EthernetSwitches
Managed
EthernetSwitches
VideoNetworkingProducts0
emai l : [email protected] www.moxa.com 0-24
Transportation Network Communication
Why Moxa?Industrial managed switches supporting redundant Ethernet rings •that recover within 20 ms.VPort industrial video servers that convert analog video signals into •high performance digital video for IP network transmission.M12 connectors ensure a tight connection to keep the Ethernet •switch running nonstop, even when subjected to incessant vibration.Industrial certifications such as UL508, NEMA TS2, and EN50155.•Advanced networking features such as VLAN, QoS, IGMP snooping, •RMON, bandwidth control, and SNMP-OPC server.
Key Products
System RequirementsGigabit network infrastructure for large bandwidth and high •transmission speeds.Redundant network topologies to guarantee continuous network •transmission.Reliable communication network over long distances.•Video, voice, and data transmission over one IP network.•Devices with rugged hardware design that can withstand wide •operating temperatures, humidity, vibration, and EMC factors.Special certifications such as NEMA TS2 and EN50155, for devices in •certain roadway and railway applications.
Industrial Ethernet for Optimization of Transportation NetworkIn modern transportation systems, real-time traffic management and environmental monitoring requires the installation of more and more pieces of equipment, such as PLCs, traffic controllers, LED displays, IP phones, and video cameras. Transportation systems have turned to TCP/IP networks as the main transmission media for equipment data and signals, in order to benefit from lower installation costs and greater system centralization.
With the large volume of data, video, and even voice that must be transmitted, transportation networks require enough bandwidth to ensure real-time monitoring and response. One attractive option is using a redundant Gigabit network infrastructure. All devices in a transportation system should be accessible for monitoring and control over a single network. Within the transportation system, video, voice, and data should all be transmitted over the TCP/IP network for easy, centralized control.
EDS-G509 9G-port Full Gigabit Managed Ethernet Switch
IKS Series Rackmount Ethernet Switch
EDS-305-M12 5-port IP67/M12 Unmanaged Ethernet Switch
ioLogik 4000 Modular Remote I/O
ioLogik E2214 Active Ethernet I/O with 6 DI, 6 Relay Outputs
VPort 351 1-channel MPEG4/MJPEG Industrial Video Encoder
Fiber Optic Cable
Transportation Network CommunicationApplication
www.moxa.com emai l : [email protected] 0-25
Industrial Ethernet Solutions for Control and Automation
0
Oil & Gas Monitoring System
Why Moxa?
Turbo Ring redundant technology with network recovery time •within 20 ms.Single mode or multi mode fiber for long distance transmission.•Class 1, Division 2/Zone 2 approvals for IMC-101 media converters •and many Ethernet switches in the EDS line.Event-driven warnings by e-mail or relay output for anomalous •behavior or network failure.High MTBF due to fanless design and low power consumption.•T models for reliable operation in extreme temperature conditions •(from -40 to 75°C).
Network Requirements
Centralized monitoring and control over a fast redundant Ethernet •ring with fiber optic cabling.Certification for safe operation in hazardous conditions, such as •Class 1, Division 2/Zone 2.Rugged protection for reliable operation in wide temperature •conditions or outdoors.Advanced network management including QoS, IGMP snooping/•GMRP, VLAN, LACP, SNMPv1/v2c/v3, and RMON.
Using Industrial Ethernet Networks to Ensure Safety and Reliability
Extracting oil and gas requires the implementation of sophisticated technologies. A broad range of operations and sites are employed, such seabed and desert installations, production facilities, pipe line transportation, tanker storage, and petrochemical plants. Production processes can be centrally monitored and controlled using industrial Ethernet networks, which feature open standards, real-time transmission capability, reliable media redundancy, and rugged features.
Safety is always a critical matter and cannot be compromised, especially in the oil and gas industry, which involves the production, processing, and storage of highly flammable substances. Sites are classified according to potential dangers, such as an explosive atmosphere or flammable conditions. Before installing any equipment, administrators must carefully confirm that each device’s classification is appropriate for the site. Strict adherence to safety directives such as the UL/cUL Class 1 Division 2, ATEX IIG3 C1Z2 type approvals, along with the associated certifications for devices used in hazardous locations, is extremely important for creating a safe system.
Key Products
EDS-728 24+4G-port Gigabit Modular Managed Ethernet Switch
EDS-516A/508A/505A 16-, 8-, or 5-port Managed Ethernet Switch
EDS-408A/405A 8- or 5-port Entry-level Managed Ethernet Switch
EDS-316/309/308/305 16-, 9-, 8-, or 5-port Unmanaged Ethernet Switch
IMC-101 Industrial Ethernet to Fiber Media Converter
VPort 351 1-channel MPEG4/MJPEG Industrial Video Encoder
Fiber Optic Cable
Oil & G
as Monitoring System
Application
emai l : [email protected] www.moxa.com 0-26
2
3
5
4
6
7
8
9
10
11
12
Overview
Wireless
EthernetActive Ethernet I/O
Peer-to-PeerI/O
Modular
Remote I/O
Media
ConvertersAccessories
Ordering Inform
ation
1
Modular
EthernetSwitches
Unmanaged
EthernetSwitches
Rackmount
EthernetSwitches
Managed
EthernetSwitches
VideoNetworkingProducts0
Ethernet in Maritime & Offshore
Why Moxa?Moxa’s EDS line of industrial Ethernet switches and IMC-101 media •converters have obtained GL & DNV type approval for safe and reliable operation in maritime environments.Moxa’s Turbo Ring provides media redundancy with a recovery time •of less than 20 ms, ensuring a reliable and stable network.EDS switches are rated to operate at temperatures from 0 to 60°C, •and the extended operating temperature models are rated for -40 to 75°C.Moxa’s managed Ethernet switches support advanced networking •technology, including VLAN, QoS, IGMP snooping, bandwidth control, SNMP-OPC server, RMON, and automatic warning by event.
Key Products
Network RequirementsDNV/GL type approval for all network device. •Ability to withstand harsh temperature, humidity, vibration, and EMC •conditions.High-bandwidth fiber optic Ethernet backbone with redundant •network topology. Reliable operation in extreme temperatures.•Manageable real-time alert system for exception-type events.•
Safeguarding the Life and Property in Marine Environments
In recent years, communication networks for maritime applications have received a boost from the trend of using Ethernet networks to integrate the operation of distributed systems. Examples include battleships, ocean liners, offshore drilling platforms, tide-power generation systems, and offshore windmill farms. The devices used in these environments are able to withstand harsh conditions, such as humidity, vibration, and EMC factors, all of which can quickly result in equipment damage, malfunction, or failure. How to choose a qualified Ethernet device has became a top issue.
DNV certification establishes the suitability of products for use in maritime and offshore environments. DNV helps the maritime industry manage risk in all phases of a ship’s life, and DNV certification for devices used as part of maritime and offshore applications is highly coveted. Moxa’s Ethernet switches have obtained DNV & GL certification, verifying their suitability for use in critical maritime workplaces, such as on ships and offshore platforms.
Fiber Optic Cable
Twisted Pair Cable
EDS-728 24+4G-port Gigabit Modular Managed Ethernet Switch
EDS-518A/510A 16+2G- or 7+3G-port Gigabit Managed Ethernet Switch
EDS-516A/508A/505A 16-, 8-, or 5-port Managed Ethernet Switch
EDS-408A/405A 8- or 5-port Entry-level Managed Ethernet Switch
EDS-316/309/308/305 16-, 9-, 8-, or 5-port Unmanaged Ethernet Switch
IMC-101 Industrial Ethernet to Fiber Media Converter
Ethernet in Maritime & OffshoreApplication
Industrial Ethernet Solutions for Control and Automation
0
www.moxa.com emai l : [email protected] 0-27
Ethernet in Security Monitoring
Ethernet in Security Monitoring
Why Moxa?Active Ethernet I/O reduces network bandwidth with “report by •exception.”Use Active Ethernet I/O to send critical sensor data immediately •instead of being subject to polling intervals.Active Ethernet I/O can achieve real-time monitoring through pro-•active event messages with time-stamp.VPort industrial video servers convert analog video signals into high •performance digital video for IP network transmission.Industrial managed Ethernet switches support redundant Ethernet •rings that recover within 20 ms to ensure non-stop network connections.
Key Products
Network Requirements
Video, voice, and data transmission over one IP network.•Less network traffic through report-by-exception approach for the •efficient use of Ethernet bandwidth.Time-stamped data for I/O device status.•Solutions for redundant Gigabit Ethernet infrastructures with large •bandwidth requirements.Easy integration with open protocols, including TCP, UDP, and SNMP.•Reliable communication networks over long distances.•
Enhancing Real-time Monitoring for Video Surveillance
The demand for video surveillance systems that specialize in security monitoring is on the increase, and with the widespread popularity of industrial Ethernet, IP-based video surveillance is gradually becoming the preferred alternative to traditional DVR surveillance systems.
Generally speaking, surveillance monitoring requires the simultaneous transmission of video, voice, and data over a single network, which means that using bandwidth efficiently is particularly important if surveillance systems are to achieve real-time monitoring. However, the challenge is even greater if the system also includes a large number of I/O applications. Traditional I/O solutions are extremely bandwidth-hungry, and require the frequent polling of passive I/O servers. Because of this, engineers are always on the lookout for efficient ways of reducing network loads. Moxa’s Remote I/O solution, called Active Ethernet I/O, is a new concept for PC-based data acquisition and control. Unlike traditional I/O servers, the non-polling architecture of Active Ethernet I/O requires far less bandwidth, and can automatically report and control I/O status based on user-specified conditions. By using Moxa’s I/O solutions, you can conserve precious bandwidth, and as a result make your surveillance and monitoring applications more efficient, and more real-time.
Fiber Optic Cable
Twisted Pair Cable
I/O Connectivity
ioLogik E2210 Active Ethernet I/O with 12 DI, 8 DO
ioMirror E3210 Ethernet Peer-to-Peer I/O with 8 DI, 8 DO
EDS-510A 7+3G-port Gigabit Managed Ethernet Switch
VPort 351 1-channel MPEG4/MJPEG Industrial Video Encoder
VPort 25 Fixed Dome IP Camera for Outdoors
VPort SDK User-friendly Software Development Kit
Application
Solution Tutorial 1-2
EDS-828 24+4G-port Layer 3 Gigabit modular managed Ethernet switch 1-7
EDS-728 24+4G-port Gigabit modular managed Ethernet switch 1-9
IM Series Gigabit Ethernet and fast Ethernet interface modules 1-11
Modular Managed Ethernet Switches
Modular Managed Ethernet Switches
1
Industrial Ethernet Solutions for Control and Automation
www.moxa.com emai l : [email protected] 1-2
Industrial Ethernet Solutions for Control and Automation
1
Modular M
anaged Ethernet Switches
Solution Tutorial
Scalable Gigabit Modular PlatformDelivers Flexible Mixtures of Media and Bandwidth
Up to 26 Remote Devices
Gigabit Fiber Optic Cable (1000BaseSX/LX/LHX/ZX)Fiber Optic Cable (100BaseFX)Twisted Pair Cable (10/100BaseT(X) or 10/100/1000BaseT(X))
Gigabit Managed Ethernet Switch
EDS-728
EDS-728
Video Server
Gigabit Turbo Ring
Video-over-IP Server Farm
EDS-828 24+4G-port Layer 3 Gigabit Modular Managed Ethernet Switch
EDS-728 24+4G-portGigabit Modular Managed Ethernet Switch
Gigabit Turbo Ring
emai l : [email protected] www.moxa.com 1-3
0
2
1
5
4
6
8
9
10
12
OverviewM
anagedEthernetSwitches
Unmanaged
EthernetSwitches
Modular
Ethernet Switches
Rackmount
EthernetSwitches
Wireless
EthernetActive Ethernet I/O
Peer-to-PeerI/O
Modular
Remote I/O
VideoNetworkingProducts
Media
ConvertersAccessories
OrderingInform
ation
11
7
3
Solution TutorialModular Managed Ethernet Switches
Layer 3 switches have optimized hardware to pass data as fast as Layer 2 switches, yet they use the IP address for making a switching decision at Layer 3, just like a router. The 802.1Q VLAN of a Layer 2 switch allows network operators to configure and maintain the network more effectively, but cross VLAN communication still relies on traditional Layer 3 routers. Both routers and Layer 3 switches use a routing protocol and routing table to determine the best path. However, compared to router
What is a Layer 3 Switch?
Instead of using a Layer 2 Ethernet switch MAC table, the EDS-828 series has a built-in IP routing table to support forwarding IP frames. Network administrators need to configure and maintain this IP routing
table totally manually. Any change in the network topology will also require the network administrator to reconfigure the routing table.
Static Routing
In addition to static routing, the EDS-828 has a built-in IP routing table that can be set up and updated dynamically by routing protocol. RIP is an often used routing protocol that uses the Bellman-Ford algorithm
and “hop count” measurement to determine how packets should be routed from one network to another.
Routing Information Protocol (RIP)
The EDS-828 series also supports OSPF, which uses “Link State” instead of “hop count” to determine the network route. OSPF is more complicated than RIP. However, compared to RIP, OSPF has faster
network convergence and less network traffic. Both RIP and OSPF are usually referred to as Interior Gateway Protocols (IGP).
Open Shortest Path First (OSPF)
LAN A
LAN B
Layer 3 Switch
The EDS-828 built-in IP routing table can be updated and maintained both statically and dynamically. If the network is small and fixed, the network administrator may configure the IP routing table manually. However, any network topology change will require the network administrator to reconfigure the settings manually. If the network is extended or the network topology is changed frequently, using
dynamic routing can efficiently enhance network stability and reduce the time it takes to effect network convergence. Dynamic routing protocol allows devices to detect and respond to network changes automatically. In this case, network administrators do not need to reconfigure the settings after the network changes.
Static versus Dynamic
Intelligent Layer 3 Network Control
that is usually software-based, Layer 3 switches are relatively faster and less expensive due to built-in switching hardware with optimized chips and full-wire speed IP frame forwarding performance suitable for VLAN interconnection. Moxa’s Layer 3 switch can be used to partition a large-scale LAN into multiple subnets for better network performance.
www.moxa.com emai l : [email protected] 1-4
Industrial Ethernet Solutions for Control and Automation
1
Modular M
anaged Ethernet Switches
Up to 8 ports can be assigned to one trunk group
Device without IEEE 802.1X authorization
Device with IEEE 802.1X authorizationRADIUS
HTTPS/SSH
The EDS-828/728 Ethernet switches support IEEE 802.1D-1998 GMRP (GARP Multicast Registration Protocol) and IGMP snooping to provide the ability to prune multicast traffic so that the traffic only travels to those end destinations that require this kind of traffic. As a result, the amount of traffic on the Ethernet LAN is reduced.
In order to protect data from being intercepted, the EDS-828/728 Ethernet switches support the HTTPS and SSH protocols for transferring data over the Internet in an encrypted form. If you are changing the configuration of an Ethernet switch online, please make sure that it is done over HTTPS and SSH so that the data remains secure.
Gigabit Ethernet Redundant Ring and Ring Coupling Capability
Port Trunking for Flexible Network Connections
IEEE 802.1X Enhances User Authentication
IGMP Snooping and GMRP for Filtering Multicast Traffic
HTTPS and SSH Enhance Network Security
Gigabit Turbo Ring
Group 1 Multicast Stream Group 2 Multicast Stream
IGMP Group 2 IGMP Group 2IGMP Group 1 IGMP Group 1
Solution Tutorial
Ethernet has become the default data communications medium for industrial automation applications. In fact, it’s not uncommon for the transfer of video, voice, and high-rate industrial application data to be integrated into one network. Moxa’s EDS-828/728 series Ethernet switches, which come equipped with a redundant Gigabit Ethernet protocol called Gigabit Turbo Ring, give system maintainers a convenient means of setting up a versatile yet stable Gigabit Ethernet network.
IEEE 802.3ad (LACP, Link Aggregation Control Protocol) provides flexible network connections and a redundant path for critical devices. The EDS-828/728 Ethernet switches allow users to set up a wider communication path by aggregating up to four trunk groups in parallel. A maximum of eight ports can be assigned to one trunk group to optimize your network connection and redundant paths. When selected ports are grouped for trunking, LACP will exchange information to determine whether or not the ports selected in a group can be trunked together.
The EDS-828/728 series Ethernet switches support IEEE 802.1X (Port-based Network Access Control) to enhance user authentication. When IEEE 802.1X is activated, only authorized users can access the port. Authentication is done using the local user database or an external RADIUS server.
Advanced Layer 2 Network Management
emai l : [email protected] www.moxa.com 1-5
0
2
1
5
4
6
8
9
10
12
OverviewM
anagedEthernetSwitches
Unmanaged
EthernetSwitches
Modular
Ethernet Switches
Rackmount
EthernetSwitches
Wireless
EthernetActive Ethernet I/O
Peer-to-PeerI/O
Modular
Remote I/O
VideoNetworkingProducts
Media
ConvertersAccessories
OrderingInform
ation
11
7
3
Solution TutorialModular Managed Ethernet Switches
The Moxa SNMP OPC Server Pro software package can convert SNMP into OPC format. The vertical integration of SNMP management information into existing OPC-based SCADA-packages gives
customers the ability to establish an Ethernet network management application that is integrated with existing visualization and control applications.
VLANs can be used to overcome restrictions imposed by the physical network connections. In one respect, devices connected to different physical networks can be allowed to communicate easily by assigning them to the same VLAN. In addition, devices assigned to different VLANs will not be able to communicate with each other, providing
extra security and protection from unwanted invasion or traffic. The EDS-828/728 Ethernet switches support 802.1Q VLAN and GVRP protocol, which can exchange the same interoperable parameters to keep consistent VLAN settings over the entire network.
Quality of Service (QoS) provides a traffic prioritization capability to ensure that important data is delivered consistently and predictably. The EDS-828/728 series Ethernet switches can inspect IEEE 802.1p/1Q Layer 2 CoS tags, and even Layer 3 TOS information, to provide a
consistent classification of the entire network. The QoS capability of the EDS-828/728 Ethernet switches improve your industrial network’s performance, and increase determinism for mission-critical applications.
RMON (Remote Network Monitoring) is an IETF (Internet Engineering Task Force) standard monitoring specification that allows various network agents and console systems to exchange network monitoring data. RMON provides you with comprehensive network fault diagnosis,
planning, and performance-tuning information, and helps you manage your network in a more proactive manner. If configured correctly, RMON probes deliver information before problems occur, allowing you to take action before the problems affect users.
The EDS-828/728 series Ethernet switches not only prevent broadcast storms, but can also configure the rate limiting of unicast/multicast/
broadcast packets, and in this way gives administrators full control of limited bandwidth to prevent unpredictable faults.
In some cases, a network is so large that it is difficult to achieve the expected communications level. Industrial communications applications use more of a command-response style than the file-transfer style used in office network environments. This means that
when first setting up an industrial Ethernet network, control engineers may need to use a second port to monitor the actual activity between their devices and computer host. The EDS-828/728 series’ mirroring port function helps ensure that the system behaves as expected.
Warning by e-mail or SNMP Trap
The EDS-828/728 series Ethernet switches can send out a warning e-mail or SNMP trap when an exception is detected, providing system managers with real-time alarm messages.
Warning by Relay Output
The EDS-828/728 series Ethernet switches provide two relay outputs that can be set up to indicate events with different importance to notify
or warn engineers in the field, so the engineer can use the appropriate emergency maintenance procedures to respond quickly to higher priority messages.
DI to Integrate Other Important Sensors
With two digital inputs, the EDS-828/728 series Ethernet switches can integrate sensors into its automatic alarm mechanism, sending warning messages to an IP network by e-mail notification.
VLAN Eases Network Planning
QoS Increases Determinism
RMON for Efficient Network Monitoring and Proactive Capability
Bandwidth Management Prevents Unpredictable Network Status
Port Mirroring for Online Monitoring
Automatic Warning by Event
Network Management with Moxa SNMP OPC Server Software
Modular Design, Maximum Flexibility
Angled LED Display provides clear viewing from all vertical angles, making it easy to check the status of the switch and each port.
Separate LEDs for the system and interface modules show clearly the current status of the system and each port.
The Mode Switch shows the modes selected for the interface module, giving you an easy way to view the status of all the ports at one glance.
User Friendly LED Display
www.moxa.com emai l : [email protected] 1-6
Industrial Ethernet Solutions for Control and Automation
1
Modular M
anaged Ethernet Switches
Solution Tutorial
Flexible Fast Ethernet Module The EDS-828/728 series Ethernet switches let you install up to 24 fast Ethernet ports. Select from eight 4-port fast Ethernet modules with a combination of 10/100BaseT(X) (RJ45 connectors) and 100BaseFX (Single/Multi mode, SC/ST connectors). Long-haul single mode optical fiber can be used to provide 100 Mbps transmission over a distance of 40 km or 80 km.
Easy and Flexible Installation
Model
EDS-828 28 4 24 √ √ √ √ √ √ √ √ √ √ √
EDS-728 28 4 24 √ √ √ √ √ √ √ √ √ √
Innovative Modular Design
Scalable Gigabit Modular Solution 100 Mbps of bandwidth is not enough to meet the requirements posed by industrial Ethernet applications that involve transmitting both voice and video. The EDS-828/728 series Ethernet switches, with their four Gigabit ports and Gigabit Turbo Ring, can give you a reliable and high performance backbone. Select from two different 2-port Gigabit modules to meet current needs or prepare for future demands.
Tota
l Num
ber o
f Por
tsGi
gabi
t Eth
erne
t(1
0/10
0/10
00 M
bps)
Fast
Eth
erne
t(1
0/10
0 M
bps)
Rout
ing
(Sta
tic, R
IP V
1/V2
)Tu
rbo
Ring
RSTP
/STP
IGM
P sn
oopi
ng/G
MRP
Port
Trun
king
/LAC
P
IEEE
802
.1X/
HTTP
S/SS
H
Port
Lock
SNM
P/RM
ON
802.
1Q V
LAN
QoS
ABC-
01*
Comparison Chart for Modular Ethernet switches
Port Interface Features
DIN-Rail Mounting KitThe rugged and user-friendly DIN-Rail kit, which is easily installed with a flat-head screw driver, has passed stringent industrial vibration, freefall, and shock tests.
*ABC-01 is an RS-232 RJ45-based automatic backup configurator for Moxa’s managed Ethernet switches. Please check page 11-1 for detailed information.
Wall Mounting KitThe wall mounting kit provides users with a handy option that meets the requirements of many different industrial applications.
emai l : [email protected] www.moxa.com 1-7
0
2
1
5
4
6
8
9
10
12
OverviewM
anagedEthernetSwitches
Unmanaged
EthernetSwitches
Modular
Ethernet Switches
Rackmount
EthernetSwitches
Wireless
EthernetActive Ethernet I/O
Peer-to-PeerI/O
Modular
Remote I/O
VideoNetworkingProducts
Media
ConvertersAccessories
OrderingInform
ation
11
7
3
Modular Managed Ethernet Switches
EDS-828 Series
IntroductionThe EDS-828 is a high-performance Layer 3 Ethernet switch designed for network routing, and the improved hardware technology built into the EDS-828 replaces the software logic used by traditional routers, offering better performance, and making the switch ideal for large-scale local area networks (LANs). In addition to Layer 3 features, the EDS-828 also supports Layer 2 management features, including
QoS, IGMP snooping/GMRP, VLAN, LACP, SNMPv1/v2c/v3, RMON, IEEE 802.1X, HTTPS, and SSH. In order to meet the demands of any industrial application, the EDS-828 uses a modular design that allows users to install up to 4 Gigabit Ethernet ports and 24 fast Ethernet ports, providing a high degree of flexibility for network expansion.
Layer 3 routing interconnects multiple LAN segments ›Static routing and RIP V1/V2 supported ›4 Gigabit plus 24 fast Ethernet ports for copper and fiber ›Gigabit Turbo Ring and RSTP/STP (IEEE 802.1w/D) for Ethernet ›redundancyQoS, IGMP snooping/GMRP, VLAN, LACP, SNMPv1/v2c/v3, ›RMON supportedIEEE 802.1X, HTTPS, and SSH to enhance network security ›
Features and BenefitsStatic routing and RIP V1/V2 to move data and information across •networksRedundant Gigabit Turbo Ring and RSTP/STP (IEEE 802.1w/D)•IGMP snooping and GMRP for filtering multicast traffic from •industrial Ethernet protocolsIEEE 802.1Q VLAN and GVRP protocol to ease network planning•QoS-IEEE 802.1p/1Q and TOS/DiffServ to increase determinism•Port Trunking for optimum bandwidth utilization•IEEE 802.1X, HTTPS, and SSH to enhance network security•SNMPv1/v2c/v3 for different levels of network management•RMON for efficient network monitoring and proactive capability•
Bandwidth management prevents unpredictable network status•Lock port function for blocking unauthorized access based on MAC •addressPort mirroring for online debugging•Automatic warning by exception through e-mail, relay output•Digital inputs for integrating sensors and alarms with IP networks•Redundant, dual DC power inputs•IP30, rugged high-strength case•DIN-Rail or panel mounting capability•Configurable by Web browser, Telnet/Serial console, Windows •utility, and ABC-01 automatic backup configurator
TechnologyStandards: IEEE 802.3 for 10BaseT,
IEEE 802.3u for 100BaseT(X) and 100Base FX,IEEE 802.3ab for 1000BaseT(X),IEEE 802.3z for 1000BaseSX/LX/LHX/ZX,IEEE 802.3x for Flow Control,IEEE 802.1D for Spanning Tree Protocol,
IEEE 802.1w for Rapid STP,IEEE 802.1Q for VLAN Tagging,IEEE 802.1p for Class of Service,IEEE 802.1X for Authentication,IEEE 802.3ad for Port Trunk with LACP
Protocols: IGMPv1/v2 device, GMRP, GVRP, SNMPv1/v2c/v3, DHCP Server/Client, DHCP Option 82, BootP, TFTP, SNTP, SMTP, RARP, RMON, RIP V1/V2, HTTP, HTTPS, Telnet, SSH, SyslogMIB: MIB-II, Ethernet-like MIB, P-BRIDGE MIB, Q-BRIDGE MIB, Bridge MIB, RSTP MIB, RMON MIB Group 1, 2, 3, 9Flow Control: IEEE 802.3x flow control, back pressure flow control
Switch PropertiesPriority Queues: 4Max. Number of Available VLANs: 64VLAN ID Range: VID 1 to 4094IGMP Groups: 256
Specifications
Layer 3 Modular Managed Ethernet Switch System, EDS-82810G
EDS-828
24+4G-port Layer 3 Gigabit modular managed Ethernet switch
www.moxa.com emai l : [email protected] 1-8
Industrial Ethernet Solutions for Control and Automation
1
Modular M
anaged Ethernet Switches
EDS-828
Dimensions (unit = mm)
Interface Fast Ethernet: 6 slots for any combination of 4-port interface module with 10/100BaseT(X) or 100BaseFX
Gigabit Ethernet: 2 slots for any combination of 2-port interface module with 10/100/1000BaseT(X) or 1000BaseSFP slot
Console: RS-232 (RJ45)System LED Indicators: STAT, PWR1, PWR2, FAULT, MASTER, COUPLER, T.RINGModule LED Indicators: LNK/ACT, FDX/HDX, RING PORT, COUPLER PORT, SPEEDAlarm Contact: Two relay outputs with current carrying capacity of 1A @ 24 VDC Digital Inputs: Two inputs with the same ground, but electrically isolated from the electronics.
+13 to +30V for state “1”•-30 to +3V for state “0”•Max. input current: 8 mA •
Power RequirementsInput Voltage: 24 VDC (12 to 45 VDC), redundant dual inputsInput Current (@ 24 V): 0.96A Connection: Two removable 6-pin terminal blocks Overload Current Protection: PresentReverse Polarity Protection: Present
Physical Characteristics Casing: IP30 protectionDimensions (W x H x D): 362.4 x 142.47 x 128 mm (14.27 x 5.61 x 5.04 in.)Weight: 1950 gInstallation: DIN-Rail mounting, wall mounting (optional kit)
Ordering Information
Layer 3 Modular Managed Ethernet Switch System, EDS-82810GLayer 3 modular managed Ethernet switch system with 6 slots for 4-port fast Ethernet interface modules and 2 slots for 2-port Gigabit interface modules, up to 24+4G ports.
Optional AccessoriesABC-01:• Industrial RS-232, RJ45-based, automatic backup configuratorEDS-SNMP OPC Server Pro: • CD with EDS-SNMP OPC server software and manualDR-4524:• 45W/2A DIN-Rail 24 VDC power supply, 85 to 264 VAC inputDR-75-24:• 75W/3.2A DIN-Rail 24 VDC power supply, 85 to 264 VAC inputDR-120-24: • 120W/5A DIN-Rail 24 VDC power supply, 88 to 132 VAC/176 to 264 VAC input by switchWK-32: • Wall mounting kit for EDS-828/728 seriesRK-4U: • 4U-high 19” rack mounting kit
Front View Rear ViewSide View
EDS-82810G IM series (Gigabit or fast Ethernet)
Step 1: Select Ethernet switch system Step 2: Select interface modules
* The EDS-82810G switch system is delivered without interface module. Please see page 1-11 for product information of IM series Gigabit and fast Ethernet interface modules.
Environmental LimitsOperating Temperature: 0 to 60°C (32 to 140°F)
Storage Temperature: -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity: 5 to 95% (non-condensing)
Regulatory Approvals Safety: UL508 (Pending), UL60950-1, CSA C22.2 No. 60950-1, EN60950-1 (Pending)
Hazardous Location: UL/cUL Class I, Division 2, Groups A, B, C, and D (Pending); ATEX Class I, Zone 2, Ex nC IIC (Pending)
Maritime: DNV (Pending), GL (Pending)
EMI: FCC Part 15, CISPR (EN55022) class A
EMS: EN61000-4-2 (ESD), level 3 EN61000-4-3 (RS), level 3 EN61000-4-4 (EFT), level 3 EN61000-4-5 (Surge), level 3 EN61000-4-6 (CS), level 3 EN61000-4-8 EN61000-4-11 EN61000-4-12
Shock: IEC 60068-2-27
Freefall: IEC 60068-2-32
Vibration: IEC 60068-2-6
MTBF: 160,000 hrs Database: Telcordia (Bellcore), GB*Please check Moxa’s website for the most up-to-date certification status.
Warranty 5 years (see www.moxa.com/warranty for details)
emai l : [email protected] www.moxa.com 1-9
0
2
1
5
4
6
8
9
10
12
OverviewM
anagedEthernetSwitches
Unmanaged
EthernetSwitches
Modular
Ethernet Switches
Rackmount
EthernetSwitches
Wireless
EthernetActive Ethernet I/O
Peer-to-PeerI/O
Modular
Remote I/O
VideoNetworkingProducts
Media
ConvertersAccessories
OrderingInform
ation
11
7
3
Modular Managed Ethernet Switches
EDS-728 Series
IntroductionThe EDS-728 modular Gigabit Ethernet switch features a versatile modular design that allows different combinations of fiber and copper modules, creating a wide array of connection options ideal for any automation network. The modular design lets you install up to 4 Gigabit ports and 24 fast Ethernet ports. The EDS-728 is specially designed for redundant Gigabit network backbones and uses a modular configuration to provide a high degree of flexibility for network
expansion. Top network performance, security, and reliability is assured through the EDS-728’s advanced management features, including QoS, IGMP snooping/GMRP, VLAN, LACP, SNMPv1/v2c/v3, RMON, IEEE 802.1X, HTTPS, and SSH. The EDS-728 also features industrial-grade construction, a console port for automatic configuration backup, and an angled LED troubleshooting panel that can be conveniently viewed from both horizontal and vertical orientations.
4 Gigabit plus 24 fast Ethernet ports for copper and fiber ›Gigabit Turbo Ring and RSTP/STP (IEEE 802.1w/D) for Ethernet ›redundancyQoS, IGMP snooping/GMRP, VLAN, LACP, SNMPv1/v2c/v3, ›RMON supportedIEEE 802.1X, HTTPS, and SSH enhance network security ›ABC-01 (Automatic Backup Configurator) for system configuration ›backup
Features and BenefitsRedundant Gigabit Turbo Ring and RSTP/STP (IEEE 802.1w/D)•IGMP snooping and GMRP for filtering multicast traffic from •industrial Ethernet protocolsIEEE 802.1Q VLAN and GVRP protocol to ease network planning•QoS-IEEE 802.1p/1Q and TOS/DiffServ to increase determinism•Port Trunking for optimum bandwidth utilization•IEEE 802.1X, HTTPS, and SSH to enhance network security•SNMPv1/v2c/v3 for different levels of network management•RMON for efficient network monitoring and proactive capability•Bandwidth management prevents unpredictable network status•
Lock port for only authorized MAC address access•Port mirroring for online debugging•Automatic warning by exception through e-mail, relay output•Digital inputs to integrate sensors and alarms with IP networks•Redundant, dual DC power inputs•IP30, rugged high-strength case•DIN-Rail or panel mounting capability•Configurable by Web browser, Telnet/Serial console, Windows •utility, and ABC-01 automatic backup configurator
TechnologyStandards: IEEE 802.3 for 10BaseT,
IEEE 802.3u for 100BaseT(X) and 100Base FX,IEEE 802.3ab for 1000BaseT(X),IEEE 802.3z for 1000BaseSX/LX/LHX/ZX,IEEE 802.3x for Flow Control,IEEE 802.1D for Spanning Tree Protocol,
IEEE 802.1w for Rapid STP,IEEE 802.1Q for VLAN Tagging,IEEE 802.1p for Class of Service,IEEE 802.1X for Authentication,IEEE 802.3ad for Port Trunk with LACP
Protocols: IGMPv1/v2 device, GMRP, GVRP, SNMPv1/v2c/v3, DHCP Server/Client, DHCP Option 82, BootP, TFTP, SNTP, SMTP, RARP, RMON, HTTP, HTTPS, Telnet, SSH, SyslogMIB: MIB-II, Ethernet-Like MIB, P-BRIDGE MIB, Q-BRIDGE MIB, Bridge MIB, RSTP MIB, RMON MIB Group 1, 2, 3, 9Flow Control: IEEE 802.3x flow control, back pressure flow control
Switch PropertiesPriority Queues: 4Max. Number of Available VLANs: 64VLAN ID Range: VID 1 to 4094IGMP Groups: 256
SpecificationsModular Managed Ethernet Switch System, EDS-72810G
EDS-728
24+4G-port Gigabit modular managed Ethernet switch
www.moxa.com emai l : [email protected] 1-10
Industrial Ethernet Solutions for Control and Automation
1
Modular M
anaged Ethernet Switches
EDS-728
Interface Fast Ethernet: 6 slots for any combination of 4-port interface module with 10/100BaseT(X) or 100BaseFXGigabit Ethernet: 2 slots for any combination of 2-port interface module with 10/100/1000BaseT(X) or 1000BaseSFP slot System LED Indicators: STAT, PWR1, PWR2, FAULT, MASTER, COUPLER, T.RINGModule LED Indicators: LNK/ACT, FDX/HDX, RING PORT, COUPLER PORT, SPEEDAlarm Contact: Two relay outputs with current carrying capacity of 1A @ 24 VDC Digital Inputs: Two inputs with the same ground, but electrically isolated from the electronics.
+13 to +30V for state “1”•-30 to +3V for state “0”•Max. input current: 8 mA •
Power Requirements Input Voltage: 24 VDC (12 to 45 VDC), redundant dual inputsInput Current (@ 24 V): 0.96A Connection: Two removable 6-pin terminal blocks Overload Current Protection: PresentReverse Polarity Protection: Present
Physical Characteristics Casing: IP30 protectionDimensions (W x H x D): 362.4 x 142.47 x 128 mm (14.27 x 5.61 x 5.04 in.)Weight: 1950 gInstallation: DIN-Rail mounting, wall mounting (optional kit)
Environmental Limits Operating Temperature: 0 to 60°C (32 to 140°F)
Dimensions (unit = mm)
Front View Rear ViewSide View
Ordering Information
Modular Managed Ethernet Switch System, EDS-72810GModular managed Ethernet switch system with 6 slots for 4-port fast Ethernet interface modules and 2 slots for 2-port Gigabit interface modules, up to 24+4G ports.
Optional AccessoriesABC-01:• Industrial RS-232, RJ45-based, automatic backup configuratorEDS-SNMP OPC Server Pro:• CD with EDS-SNMP OPC server software and manualDR-4524:• 45W/2A DIN-Rail 24 VDC power supply, 85 to 264 VAC inputDR-75-24:• 75W/3.2A DIN-Rail 24 VDC power supply, 85 to 264 VAC inputDR-120-24: • 120W/5A DIN-Rail 24 VDC power supply, 88 to 132 VAC/176 to 264 VAC input by switchWK-32: • Wall mounting kit for EDS-828/728 seriesRK-4U:• 4U-high 19” rack mounting kit
EDS-72810G
Step 1: Select Ethernet switch system Step 2: Select interface modules
* The EDS-72810G switch system is delivered without interface module. Please see page 1-11 for product information of IM series Gigabit and fast Ethernet interface modules.
IM series (Gigabit or fast Ethernet)
Storage Temperature: -40 to 85°C (-40 to 185°F) Ambient Relative Humidity: 5 to 95% (non-condensing)
Regulatory Approvals Safety: UL508 (Pending), UL60950-1, CSA C22.2 No. 60950-1, EN60950-1 (Pending)Hazardous Location: UL/cUL Class I, Division 2, Groups A, B, C, and D (Pending); ATEX Class I, Zone 2, Ex nC IIC (Pending)Maritime: DNV (Pending), GL (Pending)EMI: FCC Part 15, CISPR (EN55022) class A EMS: EN61000-4-2 (ESD), level 3 EN61000-4-3 (RS), level 3 EN61000-4-4 (EFT), level 3 EN61000-4-5 (Surge), level 3 EN61000-4-6 (CS), level 3 EN61000-4-8 EN61000-4-11 EN61000-4-12 Shock: IEC 60068-2-27 Freefall: IEC 60068-2-32 Vibration: IEC 60068-2-6MTBF: 160,000 hrs Database: Telcordia (Bellcore), GB *Please check Moxa’s website for the most up-to-date certification status.
Warranty5 years (see www.moxa.com/warranty for details)
emai l : [email protected] www.moxa.com 1-11
0
2
1
5
4
6
8
9
10
12
OverviewM
anagedEthernetSwitches
Unmanaged
EthernetSwitches
Modular
Ethernet Switches
Rackmount
EthernetSwitches
Wireless
EthernetActive Ethernet I/O
Peer-to-PeerI/O
Modular
Remote I/O
VideoNetworkingProducts
Media
ConvertersAccessories
OrderingInform
ation
11
7
3
2-port Gigabit Ethernet and 4-port fast Ethernet interface modules for EDS-828/728 series Ethernet switches
Modular Managed Ethernet Switches
InterfaceLED Indicators: Port statusRJ45 Ports: 10/100/1000BaseT(X) auto negotiation speed and auto MDI/MDI-X connection
Fiber Ports: 1000BaseSFP slot* Please see page 2-23 for the product information of SFP-1G series Gigabit
Ethernet SFP modules.
Power RequirementsPower Consumption: IM-2GTX: 2.96W
IM-2GSFP: 3.042W
Physical Characteristics Dimensions (W x H x D): 24 x 65.9 x 101.1 mm (0.94 x 2.59 x 3.98 in.)Weight: IM-2GTX: 150 g IM-2GSFP: 148 g
InterfaceLED Indicators: PWR, P1, P2, P3, P4 port statusRJ45 Ports: 10/100BaseT(X) auto negotiation speed, F/H duplex mode, and auto MDI/MDI-X connectionFiber Ports: 100BaseFX ports (SC/ST connector)
Optical Fiber
Power RequirementsPower Consumption:IM-4TX: 2.5W IM-2MSC/2TX: 5W
IM-2MST/2TX: 5W IM-2SSC/2TX: 5WIM-1LSC/3TX: 4WIM-4MSC: 7.2W IM-4MST: 7.2WIM-4SSC: 7.2W
Physical CharacteristicsCasing: IP30 protectionDimensions (W x H x D): 40 x 127.8 x 100 mm (1.57 x 5.03 x 3.94 in.)Weight (Gross Weight): IM-4TX: 215 gIM-2MSC/2TX: 245 gIM-2MST/2TX: 250 gIM-2SSC/2TX: 245 gIM-1LSC/3TX: 235 gIM-4MSC: 250 g IM-4MST: 270 g IM-4SSC: 270 g
MTBF620,000 hrs Database: MIL-HDBK-217F, GB 25˚C
IM Series
Specifications
Gigabit Ethernet Interface Modules, IM-2G Series
Fast Ethernet Interface Modules, IM Series
IM-2GTX IM-2GSFP
IM-4TX IM-4MSCIM-4SSC
IM-2MST/2TX IM-1LSC/3TXIM-2MSC/2TXIM-2SSC/2TX
IM-4MST
100BaseFX
Multi Mode Single Mode Single Mode, 80 km
Wavelength 1300 nm 1310 nm 1550 nmMax. TX -10 dBm 0 dBm 0 dBm
Min. TX -20 dBm -5 dBm -5 dBm
RX Sensitivity -32 dBm -34 dBm -34 dBm
Link Budget 12 dB 29 dB 29 dB
Typical Distance 5 km a
4 km b 40 km c 80 km d
Saturation -6 dBm -3 dBm -3 dBm
a. 50/125 μm, 800 MHz*km fiber optic cableb. 62.5/125 μm, 500 MHz*km fiber optic cablec. 9/125 μm, 3.5 PS/(nm*km) fiber optic cabled. 9/125 μm, 19 PS/(nm*km) fiber optic cable
IM Series
www.moxa.com emai l : [email protected] 1-12
Industrial Ethernet Solutions for Control and Automation
1
Modular M
anaged Ethernet Switches
Dimensions (unit = mm)
IM Series
Ordering Information
Gigabit Ethernet Interface Modules Fast Ethernet Interface Modules
Side View Rear ViewFront View Front View Side View
Product Model
Port Interface
Gigabit Ethernet Fast Ethernet
10/100/1000BaseT(X) 1000BaseSFP* 10/100BaseT(X)
100BaseFX
Multi Mode,SC Connector
Multi Mode,ST Connector
Single Mode,SC Connector
Single Mode,SC Connector,
80 km
IM-2G Series
IM-2GTX 2
IM-2GSFP 2
IM Series
IM-4TX 4
IM-4MSC 4
IM-4MST 4
IM-2MSC/2TX 2 2
IM-2MST/2TX 2 2
IM-4SSC 4
IM-2SSC/2TX 2 2
IM-1LSC/3TX 3 1
* IM-2GSFP supports 2 1000BaseSFP slots. Please see page 2-23 for the product information of SFP-1G series Gigabit Ethernet SFP modules.
Solution Tutorial 2-2
EDS-G509 9G-port full Gigabit managed Ethernet switch 2-8
EDS-518A 16+2G-port Gigabit managed Ethernet switch 2-10
EDS-510A 7+3G-port Gigabit managed Ethernet switch 2-12
EDS-516A/508A/505A 16-, 8-, and 5-port managed Ethernet switches 2-14
EDS-408A/405A 8- and 5-port entry-level managed Ethernet switches 2-17
PX-1510 7+3G-port Gigabit PoE managed Ethernet switch 2-19
Moxa NMS Network management software 2-21
EDS-SNMP OPC Server Pro OPC server for connecting SNMP devices 2-22
SFP-1G Series 1G-port Gigabit Ethernet SFP modules 2-23
Industrial Ethernet Solutions for Control and Automation
Managed Ethernet Switches
2Managed Ethernet Switches
www.moxa.com emai l : [email protected] 2-2
2
Managed Ethernet Sw
itches
Industrial Ethernet Solutions for Control and Automation
Wide Selection of Managed Ethernet SwitchesVariety of Topologies for Flexible Network Planning
Gigabit Turbo Ring
Turbo RingRecovery Time < 20 ms
StorageServer
IP Surveillance Software
Moxa NMSNetwork Management Software
Web-based Access
OPC Server & Client
EDS-728
EDS-405A
EDS-405A
Dual-Homing
Gigabit Fiber Optic Cable (1000BaseSX/LX/LHX/ZX)Fiber Optic Cable (100BaseFX)Twisted Pair Cable (10/100BaseT(X) or 10/100/1000BaseT(X))Power-over-Ethernet
Gigabit Turbo Ring
PX-1510 Gigabit PoE Managed Ethernet Switch
EDS-510AGigabit Managed Ethernet Switch
EDS-G509Full Gigabit Managed
Ethernet Switch
Up to 6 Gigabit servers
EDS-408AEntry-level Managed Ethernet Switch
EDS-516AManaged Ethernet
Switch
Wireless Access Point
IP PhoneIP Camera
Turbo Ring
EDS-518AGigabit Managed Ethernet Switch
EDS-508A
EDS-505AManaged Ethernet Switch
Dual-Ring
Turbo Ring
Solution Tutorial
Ring Coupling
emai l : [email protected] www.moxa.com 2-3
2
Managed
Ethernet Switches
0Overview
1
Modular
EthernetSwitches
3
5
6
7
8
9
10
12
Wireless
EthernetActive Ethernet I/O
Peer-to-PeerI/O
Modular
Remote I/O
Media
ConvertersAccessories
11
Unmanaged
EthernetSwitches
Rackmount
EthernetSwitches
VideoNetworkingProducts
OrderingInform
ation
4
Managed Ethernet Switches
Ethernet is becoming the default data communication medium for industrial automation applications. In fact, it’s not uncommon for video, voice, and high-rate industrial application data transfers to be integrated into one network. Moxa’s EDS-G509/518A/510A and PX-1510, which come equipped with a redundant Gigabit Ethernet protocol called Gigabit Turbo Ring, gives system maintainers a convenient means of setting up a versatile yet stable Gigabit Ethernet network. With Gigabit Turbo Ring, if any segment of the network is disconnected, your automation system will be back to normal in few milliseconds.
Moxa provides a complete range of solutions for IEEE 802.3af PoE compliant units and Ethernet-enabled devices. The Gigabit PoE managed Ethernet switch, PX-1510, can be used not only to simplify wiring in the field, but also to provide advanced network control and management. In addition, the devices can be placed up to 328 feet (100 m) from a PSE.
Gigabit Ethernet Redundant Ring
Coupling Several Turbo Rings for Distributed Applications
Gigabit Turbo Ring
Ring A
Ring B
Ring Master
Ring Master
Ring Master
Dual-RingDual-Homing
Ring Coupling
Backup Path
Primary Path
Ring Master
Ring Master
Ring A
Ring B
Ring A
Ring B
Ring Master
For some systems, it may not be convenient to connect all devices in the system to create one BIG redundant ring, since some devices could be located at a remote site. Turbo Ring's "Ring Coupling" function helps you separate those distributed devices into different smaller redundant rings, without any control line, but in such a way that the smaller rings will still be able to communicate with each other.
The advanced coupling technology allows you to diversify the connection to Turbo Ring and fit various installation environments. You can configure the network for “Dual-Homing,” which involves coupling two separate rings with a single EDS Ethernet switch connecting to two independent connection points. The back-up path will be activated if the operating connection (primary path) fails, and the “Dual-Ring” function adds reliability by allowing a single EDS Ethernet switch to connect two separate rings for applications that present cabling difficulties.
Versatile Redundant Turbo Ring Topology for Flexible Network Planning
Power-over-Ethernet Solution for Simple and Flexible Connections
Ring Master
Ethernet PowerPower-over-Ethernet
DR-120-48
PX-1510 PoE Ethernet Switch
SPL-24
Non-PoE Device
24 VDC outputData on
Ethernet
48 VDC input
PoE Spliter
AWK-1100Wireless Access Point
Solution Tutorial
Backup Path
Primary Path
www.moxa.com emai l : [email protected] 2-4
2
Managed Ethernet Sw
itches
Industrial Ethernet Solutions for Control and Automation
The EDS-G509, EDS-500A, and PX-1510 series supports IEEE 802.1X (Port-based Network Access Control) to restrict port access to authorized users only. Authentication is done using the local user database or an external RADIUS (Remote Authentication Dial In User Service) server.
The EDS-G509, EDS-500A, and PX-1510 series Ethernet switches support IEEE 802.1D-1998 GMRP (GARP Multicast Registration Protocol) and IGMP snooping, which provide the ability to prune multicast traffic so that it travels only to those end destinations that require this kind of traffic. The overall effect is to reduce the amount of traffic on the Ethernet LAN.
IEEE 802.1X Enhances User Authentication
IGMP Snooping and GMRP for Filtering Multicast Traffic
RMON (Remote Network Monitoring) is an Internet Engineering Task Force (IETF) standard monitoring specification that allows various network agents and console systems to exchange network monitoring data. RMON provides you with comprehensive network fault diagnosis, planning, and
performance-tuning information, and helps you manage your network in a more proactive manner. If configured correctly, RMON probes deliver information before problems occur. This means that you can take action before the problems affect users.
RMON for Efficient Network Monitoring and Proactive Capability
Device without IEEE 802.1X authorization
Device with IEEE 802.1X authorization
RADIUS
Group 1 Multicast Stream Group 2 Multicast Stream
IGMP Group 2 IGMP Group 2IGMP Group 1 IGMP Group 1
IEEE 802.3ad (LACP, Link Aggregation Control Protocol) provides flexible network connections and a redundant path for critical devices. For example, the EDS-G509 and EDS-500A allow users to set up a wider communication path by aggregating a trunk group. A maximum of eight ports can be assigned to one trunk group to optimize your network connection and redundant paths. When selected ports are grouped for trunking, LACP will exchange information to determine whether or not the ports selected in a group can be trunked together.
Port Trunking for Flexible Network Connections
Up to 8 ports can be assigned to one trunk group
Solution Tutorial
Advanced Network Control and Management
HTTPS/SSH
In order to protect data from being intercepted, the EDS-G509, EDS-500A, and PX-1510 series support the HTTPS and SSH protocols for transferring data over the Internet in an encrypted form. If you are changing the configuration of an Ethernet switch online, please make sure that it is done over HTTPS and SSH so that the data remains secure.
HTTPS and SSH Enhance Network Security
emai l : [email protected] www.moxa.com 2-5
2
Managed
Ethernet Switches
0Overview
1
Modular
EthernetSwitches
3
5
6
7
8
9
10
12
Wireless
EthernetActive Ethernet I/O
Peer-to-PeerI/O
Modular
Remote I/O
Media
ConvertersAccessories
11
Unmanaged
EthernetSwitches
Rackmount
EthernetSwitches
VideoNetworkingProducts
OrderingInform
ation
4
Managed Ethernet Switches Solution Tutorial
A VLAN is a group of devices that can be located anywhere on a network, but which communicate as if they are on the same physical segment. VLANs can be used to segment your network without being restricted by physical connections—a limitation imposed by traditional network design. Besides, since all automation systems incorporate sensitive devices that must be protected from unauthorized access, it is very important to have some type of authentication system set up that only allows authorized users to access the system. If devices belong to different VLANs, they cannot communicate with each other, providing extra security and protection from unwanted invasion or traffic. The IEEE 802.1Q standard and GVRP protocol can exchange the same interoperable parameters to keep consistent VLAN settings over the entire network.
VLAN Eases Network Planning
Quality of Service (QoS) provides a traffic prioritization capability to ensure that important data is delievered consistently and predictably. Moxa’s managed Ethernet switches can inspect IEEE 802.1p/1Q layer 2 CoS tags, and even layer 3 TOS information, to provide a consistent classification of the entire network. The QoS capability of the managed Ethernet switches improve your industrial network’s performance and determinism for mission-critical applications.
QoS Increases Determinism
Low Priority
Collected Data
Top Priority
High Priority
Control Message
Management Message
VLAN1VLAN2
VLAN3
Department 1 Department 2 Department 3
Unlimited bandwidth should not be given to any single device on a network, particularly in light of what could happen if the device malfunctions. The most well-known problem is the broadcast storms caused by setting up the wrong topology, or by devices that malfunction. Moxa’s managed Ethernet switches series not only prevent broadcast storms, but in addition the ingress/egress rate of unicast/multicast/broadcast packets can also be configured to give administrators full control of limited bandwidth to prevent unpredictable faults.
Bandwidth Management Prevents Unpredictable Network Status
Traffic filtered or dropped inside Moxa’s managed Ethernet switches
Normal Traffic
Overloaded Traffic
FailedNetwork Device
The EDS-G509, EDS-500A, and PX-1510 Ethernet switches can use the Port Lock function to assign protected static MAC addresses to specific ports. Locked ports will not be able to learn other addresses, but only allow traffic that comes from the preset static MAC address, helping block unwanted invasion and usage.
Port Lock Limits Accessed by MAC Address
Device without authorized MAC address
Device with authorized MAC address
Low Priority
Top Priority
High Priority
Normal Traffic Normal Traffic
Mirrored Traffic
In some cases, a network is so large that it is difficult to achieve the expected level of communications. Industrial communications applications use more of a command-response style than the file- transfer style used in office network environments. This means that when first setting up an industrial Ethernet network, control engineers may need to use a second port to monitor the actual activity between their devices and computer host. The mirroring port function on the Moxa’s managed Ethernet switches help ensure that the system behaves as expected.
Port Mirroring for Online Monitoring
www.moxa.com emai l : [email protected] 2-6
2
Managed Ethernet Sw
itches
Industrial Ethernet Solutions for Control and Automation
PLC
LAN
PLC
Switch Events Port Events
Cold Start Warm Start Link On
Power On/Off Authentication Failure Link Off
Topology Change Configuration Change Traffic Overload
Since industrial Ethernet devices are often located at remote parts of a network, it may be hard for system administrators to know the status of such devices. The traditional way of determining device status is to poll devices periodically, but this is not “real-time” enough for many modern applications, and also wastes precious computing resources. A more modern solution to this problem is to use industrial
Ethernet switches that provide system maintainers with real-time alarm messages almost instantaneously when exceptions occur. In other words, warning messages are triggered actively when the events occur. In order to handle these requirements, industrial Ethernet switches need features such as:
Automatic Warning by Event
Replacing Faulty Devices
Warning Notification
To reduce the effort required to configure IP addresses, Moxa’s managed Ethernet switches are equipped with DHCP/BootP server and RARP protocol, which are used to set up IP addresses of Ethernet-enabled devices automatically.
In additions, the managed Ethernet switches can also play a role of DHCP relay agent (with Option 82 support) to forward the DHCP requests and provide information details (such as the slot ID, port number and VLAN ID) for the authentication of DHCP server.
Warning by e-mailMoxa’s managed Ethernet switches send out a warning e-mail when an exception is detected, providing system managers with real-time alarm
messages.
Warning by Relay OutputThe managed Ethernet switches provide relay outputs that can be configured to indicate the importance of events when notifying or warning engineers in the field. In response, engineers can respond quickly and with the appropriate emergency maintenance procedures to higher priority messages.
DI for Integrating Other Important SensorsThe EDS-G509, EDS-500A, and PX-1510 Ethernet switches have two digital inputs for integrating sensors into the Ethernet switches’ automatic alarm mechanism. This is done by redirecting warning messages to an IP network by e-mail notification.
Solution Tutorial
PLC
IP
DHCP request
IP
DHCP request
DHCP serverPLC
IP
New Device
emai l : [email protected] www.moxa.com 2-7
2
Managed
Ethernet Switches
0Overview
1
Modular
EthernetSwitches
3
5
6
7
8
9
10
12
Wireless
EthernetActive Ethernet I/O
Peer-to-PeerI/O
Modular
Remote I/O
Media
ConvertersAccessories
11
Unmanaged
EthernetSwitches
Rackmount
EthernetSwitches
VideoNetworkingProducts
OrderingInform
ation
4
Managed Ethernet Switches Solution Tutorial
Moxa’s managed Ethernet switches can be configured easily over the network by web browser, Telnet console, or a Windows utility provided by Moxa. In addition, it is simple to back up configuration parameters and update firmware in the managed Ethernet switches with these user-friendly tools.
Easy Browser-based Configuration
Model
EDS-G509 9 9 - - 2 2 √ √ √ √ √ √ √ √ √ √ √
EDS-518A 18 2 16 - 2 2 - √ √ √ √ √ √ √ √ √ √
EDS-516A 16 - 16 - 2 2 - √ √ √ √ √ √ √ √ √ √
EDS-510A 10 3 7 - 2 2 √ √ √ √ √ √ √ √ √ √ √
EDS-508A 8 - 8 - 2 2 √ √ √ √ √ √ √ √ √ √ √
EDS-505A 5 - 5 - 2 2 √ √ √ √ √ √ √ √ √ √ √
EDS-408A 8 - 8 - 1 - √ √ √ √ √ √ √
EDS-405A 5 - 5 - 1 - √ √ √ √ √ √ √
PX-1510 10 3 3 4 2 2 √ √ √ √ √ √ √ √ √ √ √
Tota
l Num
ber o
f Por
tsG
igab
it Et
hern
et(1
0/10
0/10
00 M
bps)
Fast
Eth
erne
t(1
0/10
0 M
bps)
PoE,
Fas
t Eth
erne
t(1
0/10
0 M
bps)
Digi
tal O
utpu
t
Digi
tal I
nput
DIP
Switc
h
Turb
o Ri
ng
RSTP
/STP
IGM
P sn
oopi
ng/G
MRP
Port
Trun
king
/LAC
P
IEEE
802.1
X/HT
TPS/
SSH
SNM
P/RM
ON
802.
1Q V
LAN
Port-
base
d VL
AN
QoS
ABC-
01*
Interface Features
ABC-01 Provides a Seamless Backup Solution
SAVE LOAD
Comparison Chart for Managed Ethernet Switches
The Moxa SNMP OPC Server Pro software package can convert SNMP into OPC format. The vertical integration of SNMP management information into existing OPC-based SCADA packages gives the customer the ability to establish an Ethernet network management application that is integrated with existing visualization and control applications.
Network Management with Moxa SNMP OPC Server Software
Moxa’s ABC-01 is designed to save and load the configuration of a Moxa EDS managed Ethernet switch. Simply plug the ABC-01 into the Ethernet switch’s RS-232 console port, and then use the Ethernet switch’s HMI utility to save or load the configuration. The ABC-01 makes it easy to manage your network, particularly when you need to back up or replace an Ethernet switch. You can quickly reinstall a substitute Ethernet switch (of the same model) or recover the entire system configuration if an Ethernet switch failure occurs.
ABC-01 ABC-01
*ABC-01 is an RS-232 RJ45-based automatic backup configurator for Moxa’s managed Ethernet switches. Please check page 11-1 for detailed information.
www.moxa.com emai l : [email protected] 2-8
2
Managed Ethernet Sw
itches
Industrial Ethernet Solutions for Control and Automation
EDS-G509 Series
IntroductionThe EDS-G509 is equipped with 9 Gigabit Ethernet ports and up to 5 fiber optic ports, making it ideal for upgrading an existing network to Gigabit speeds or building a new full Gigabit backbone. Gigabit transmission increases bandwidth for higher performance and transfers large amounts of video, voice, and data across a network quickly. The redundant Ethernet Turbo Ring and RSTP/STP (IEEE
802.1w/D) increase system reliability and the availability of your network backbone. The EDS-G509 series is designed especially for communication demanding applications, such as video and process monitoring, shipbuilding, ITS, and DCS systems, all of which can benefit from a scalable backbone construction.
4 10/100/1000BaseT(X) ports plus 5 combo (10/100/1000BaseT(X) ›or 100/1000BaseSFP slot) Gigabit portsFiber optic options for extending distance and electrical noise ›immunityTurbo Ring, RSTP/STP (IEEE 802.1w/D) for Ethernet redundancy ›QoS, IGMP snooping/GMRP, VLAN, LACP, SNMPv1/v2c/v3, RMON ›supportedIEEE 802.1X, HTTPS, and SSH enhance network security ›
EDS-G
509
Features and BenefitsTurbo Ring and RSTP/STP (IEEE 802.1w/D)•IGMP snooping and GMRP for filtering multicast traffic•Port-based VLAN, IEEE 802.1Q VLAN, and GVRP to ease network •planningQoS-IEEE 802.1p/1Q and TOS/DiffServ to increase determinism•Port Trunking for optimum bandwidth utilization•IEEE 802.1X, HTTPS, and SSH to enhance network security•SNMPv1/v2c/v3 for different levels of network management•
RMON for efficient network monitoring and proactive capability•Bandwidth management prevents unpredictable network status•Lock port function for blocking unauthorized access based on MAC •addressPort mirroring for online debugging•Automatic warning by exception through e-mail, relay output•Digital inputs to integrate sensors and alarms with IP networks•ABC-01 (Automatic Backup Configurator) for system configuration •backup
Specifications
TechnologyStandards: IEEE 802.3 for 10BaseT, IEEE 802.3u for 100BaseT(X) and 100Base FX, IEEE 802.3ab for 1000Base(X), IEEE 802.3z for 1000BaseSX/LX/LHX/ZX, IEEE 802.3x for Flow Control, IEEE 802.1D for Spanning Tree Protocol, IEEE 802.1w for Rapid STP, IEEE 802.1Q for VLAN Tagging, IEEE 802.1p for Class of Service, IEEE 802.1X for Authentication, IEEE 802.3ad for Port Trunk with LACPProtocols: IGMPv1/v2 device, GMRP, GVRP, SNMPv1/v2c/v3, DHCP Server/Client, DHCP Option 82, BootP, TFTP, SNTP, SMTP, RARP, RMON, HTTP, HTTPS, Telnet, SSH, Syslog MIB: MIB-II, Ethernet-Like MIB, P-BRIDGE MIB, Q-BRIDGE MIB, Bridge MIB, RSTP MIB, RMON MIB Group 1, 2, 3, 9Flow Control: IEEE 802.3x flow control, back pressure flow control
9G-port full Gigabit managed Ethernet switch
Switch PropertiesPriority Queues: 4Max. Number of Available VLANs: 64VLAN ID Range: VID 1 to 4094IGMP Groups: 256
InterfaceRJ45 Ports: 10/100/1000BaseT(X) auto negotiation speedFiber Ports: 100/1000BaseSFP slotConsole: RS-232 (RJ45)LED Indicators: PWR1, PWR2, FAULT, 10/100M/1000M, MASTER, COUPLERDIP Switch: Turbo Ring, Master, Coupler, ReserveAlarm Contact: Two relay outputs with current carrying capacity of 1A @ 24 VDCDigital Inputs: Two inputs with the same ground, but electrically isolated from the electronics.
+13 to +30V for state “1”•
Preliminary
emai l : [email protected] www.moxa.com 2-9
2
Managed
Ethernet Switches
0Overview
1
Modular
EthernetSwitches
3
5
6
7
8
9
10
12
Wireless
EthernetActive Ethernet I/O
Peer-to-PeerI/O
Modular
Remote I/O
Media
ConvertersAccessories
11
Unmanaged
EthernetSwitches
Rackmount
EthernetSwitches
VideoNetworkingProducts
OrderingInform
ation
4Dimensions (unit = mm)
Ordering Information
G509
8
9
8
9
Side View Front ViewDIN-Rail Kit Rear View Mounting Kit
-30 to +3V for state “0”•Max. input current: 8 mA•
Power RequirementsInput Voltage: 12/24/48 VDC (9.6 to 60 VDC), 24 VAC (18 to 30 VAC), redundant dual inputsConnection: Two removable 6-pin terminal blocksOverload Current Protection: PresentReverse Polarity Protection: Present
Physical CharacteristicsCasing: IP30 protection, metal caseDimensions (W x H x D): 80.2 x 135 x 105 mm (3.16 x 5.31 x 4.13 in.)Installation: DIN-Rail mounting, wall mounting (optional kit)
Environmental LimitsOperating Temperature: 0 to 60°C (32 to 140°F) -40 to 75°C (-40 to 167°F) for T modelsStorage Temperature: -40 to 85°C (-40 to 185°F)Ambient Relative Humidity: 5 to 95% (non-condensing)
Regulatory ApprovalsSafety: UL508 (Pending), EN60950-1 (Pending)Hazardous Location: UL/cUL Class I, Division 2, Groups A, B, C, and D (Pending); ATEX Class I, Zone 2, Ex nC IIC (Pending)Maritime: DNV (Pending), GL (Pending)EMI: FCC Part 15, CISPR (EN55022) class AEMS: EN61000-4-2 (ESD), level 3 EN61000-4-3 (RS), level 3 EN61000-4-4 (EFT), level 3 EN61000-4-5 (Surge), level 2 EN61000-4-6 (CS), level 3 EN61000-4-8 EN61000-4-11 Shock: IEC 60068-2-27Freefall: IEC 60068-2-32Vibration: IEC 60068-2-6*Please check Moxa’s website for the most up-to-date certification status.
Warranty5 years (see www.moxa.com/warranty for details)
Optional AccessoriesABC-01: • Industrial RS-232, RJ45-based, automatic backup configuratorEDS-SNMP OPC Server Pro:• CD with EDS-SNMP OPC server software and manualDR-4524:• 45W/2A DIN-Rail 24 VDC power supply, 85 to 264 VAC inputDR-75-24:• 75W/3.2A DIN-Rail 24 VDC power supply, 85 to 264 VAC inputDR-120-24:• 120W/5A DIN-Rail 24 VDC power supply, 88 to 132 VAC/176 to 264 VAC input by switchWK-46:• Wall mounting kitRK-4U:• 4U-high, 19” rack mounting kit
EDS-G509: • Industrial full Gigabit managed Ethernet switch with 4 10/100/1000BaseT(X) ports, and 5 10/100/1000BaseT(X) or 100/1000BaseSFP slot combo ports, 0 to 60˚CEDS-G509-T: • Industrial full Gigabit managed Ethernet switch with 4 10/100/1000BaseT(X) ports, and 5 10/100/1000BaseT(X) or 100/1000BaseSFP slot combo ports, -40 to 75˚C
* EDS-G509 series supports up to 5 100/1000BaseSFP slots. Please see page 2-23 for the product information of SFP-1G series Gigabit Ethernet SFP modules.
Managed Ethernet Switches EDS-G509
www.moxa.com emai l : [email protected] 2-10
2
Managed Ethernet Sw
itches
Industrial Ethernet Solutions for Control and Automation
EDS-518A Series
IntroductionThe EDS-518A is a standalone 18-port managed Ethernet switch that provides 2 combo Gigabit ports with built-in RJ45 or SFP slots for Gigabit optic communication. The Ethernet redundant Turbo Ring (recovery time < 20 ms) increases the reliability and speed of your
network backbone. The EDS-518A also supports intelligent network management functions, including QoS, IGMP snooping/GMRP, VLAN, Port Trunking, SNMPv1/v2c/v3, IEEE 802.1X, HTTPS, and SSH.
2 Gigabit plus 16 fast Ethernet ports for copper and fiber ›Turbo Ring (recovery time < 20 ms), RSTP/STP (IEEE 802.1w/D) ›for Ethernet redundancyQoS, IGMP snooping/GMRP, VLAN, LACP, SNMPv1/v2c/v3, ›RMON supportedIEEE 802.1X, HTTPS, and SSH › enhance network securityABC-01 (Automatic Backup Configurator) for system configuration ›backup
TechnologyStandards: IEEE 802.3 for 10BaseT, IEEE 802.3u for 100BaseT(X) and 100Base FX, IEEE 802.3ab for 1000BaseT(X), IEEE 802.3z for 1000BaseSX/LX/LHX/ZX, IEEE 802.3x for Flow Control, IEEE 802.1D for Spanning Tree Protocol, IEEE 802.1w for Rapid STP, IEEE 802.1Q for VLAN Tagging, IEEE 802.1p for Class of Service, IEEE 802.1X for Authentication, IEEE 802.3ad for Port Trunk with LACPProtocols: IGMPv1/v2 device, GMRP, GVRP, SNMPv1/v2c/v3, DHCP Server/Client, DHCP Option 82, BootP, TFTP, SNTP, SMTP, RARP, RMON, HTTP, HTTPS, Telnet, SSH, Syslog MIB: MIB-II, Ethernet-Like MIB, P-BRIDGE MIB, Q-BRIDGE MIB, Bridge MIB, RSTP MIB, RMON MIB Group 1, 2, 3, 9Flow Control: IEEE 802.3x flow control, back pressure flow control Interface
Switch Properties Priority Queues: 4Max. Number of Available VLANs: 64VLAN ID Range: VID 1 to 4094IGMP Groups: 256
InterfaceRJ45 Ports: 10/100BaseT(X) or 10/100/1000BaseT(X) auto negotiation speedFiber Ports: 100BaseFX (SC/ST connector), and 1000BaseSFP slotConsole: RS-232 (RJ45)
SpecificationsLED Indicators: PWR1, PWR2, FAULT, 10/100M (TP port), 100M (Fiber port), MASTER, COUPLERAlarm Contact: Two relay outputs with current carrying capacity of 1A @ 24 VDCDigital Inputs: Two inputs with the same ground, but electrically isolated from the electronics.
+13 to +30V for state “1”•-30 to +3V for state “0”•Max. input current: 8 mA•
Optical Fiber
EDS-518A
Features and BenefitsTurbo Ring (recovery time < 20 ms at full load) and RSTP/STP •(IEEE 802.1w/D)IGMP snooping and GMRP for filtering multicast traffic•Port-based VLAN, IEEE 802.1Q VLAN, and GVRP to ease network •planningQoS-IEEE 802.1p and TOS/DiffServ to increase determinism•Port Trunking for optimum bandwidth utilization•IEEE 802.1X, HTTPS, and SSH to enhance network security•
SNMPv1/v2c/v3 for different levels of network management•RMON for efficient network monitoring and proactive capability•Bandwidth management prevents unpredictable network status•ABC-01 (Automatic Backup Configurator) for system configuration backup•Port mirroring for online debugging•Automatic warning by exception through e-mail, relay output•Digital inputs to integrate sensors and alarms with IP networks•DIN-Rail or panel mounting capability•
100BaseFX
Multi Mode Single ModeSingle Mode,
80 kmWavelength 1300 nm 1310 nm 1550 nmMax. TX -10 dBm 0 dBm 0 dBm
Min. TX -20 dBm -5 dBm -5 dBm
RX Sensitivity -32 dBm -34 dBm -34 dBm
Link Budget 12 dB 29 dB 29 dB
Typical Distance 5 km a
4 km b 40 km c 80 km d
Saturation -6 dBm -3 dBm -3 dBm
a. 50/125 μm, 800 MHz*km fiber optic cableb. 62.5/125 μm, 500 MHz*km fiber optic cablec. 9/125 μm, 3.5 PS/(nm*km) fiber optic cabled. 9/125 μm, 19 PS/(nm*km) fiber optic cable
16+2G-port Gigabit managed Ethernet switch
emai l : [email protected] www.moxa.com 2-11
2
Managed
Ethernet Switches
0Overview
1
Modular
EthernetSwitches
3
5
6
7
8
9
10
12
Wireless
EthernetActive Ethernet I/O
Peer-to-PeerI/O
Modular
Remote I/O
Media
ConvertersAccessories
11
Unmanaged
EthernetSwitches
Rackmount
EthernetSwitches
VideoNetworkingProducts
OrderingInform
ation
4Dimensions (unit = mm)
142.7 94
Side View Front ViewDIN-Rail Kit Rear View Mounting Kit
Product ModelPort Interface
Gigabit Ethernet Fast Ethernet
Standard Temperature (0 to 60˚C)
Extended Temperature(-40 to 75˚C)
Combo Port, 10/100/1000BaseT(X)
or 1000BaseSFP*10/100BaseT(X)
100BaseFX
Multi Mode, SC Connector
Multi Mode, ST Connector
Single Mode, SC Connector
Single Mode, SC Connector,
80 km
EDS-518A EDS-518A-T 2 16
EDS-518A-MM-SC EDS-518A-MM-SC-T 2 14 2
EDS-518A-MM-ST EDS-518A-MM-ST-T 2 14 2
EDS-518A-SS-SC EDS-518A-SS-SC-T 2 14 2
EDS-518A-SS-SC-80 2 14 2
* EDS-518A series supports 2 1000BaseSFP slots. Please see page 2-23 for the product information of SFP-1G series Gigabit Ethernet SFP modules.
Ordering Information
Power RequirementsInput Voltage: 24 VDC (12 to 45 VDC), redundant dual inputsInput Current (@ 24 V): 0.51A (EDS-518A), 0.61A (EDS-518A-MM, EDS-518A-SS)Connection: Two removable 6-pin terminal blocksOverload Current Protection: PresentReverse Polarity Protection: Present
Physical CharacteristicsCasing: IP30 protection, metal caseDimensions (W x H x D): 94 x 135 x 142.7 mm (3.7 x 5.31 x 5.62 in.) Weight: 1630 gInstallation: DIN-Rail mounting, wall mounting (optional kit)
Environmental LimitsOperating Temperature: 0 to 60°C (32 to 140°F) -40 to 75°C (-40 to 167°F) for T modelsStorage Temperature: -40 to 85°C (-40 to 185°F)Ambient Relative Humidity: 5 to 95% (non-condensing)
Regulatory ApprovalsSafety: UL508, UL60950-1, CSA C22.2 No. 60950-1, EN60950-1
Hazardous Location: UL/cUL Class I, Division 2, Groups A, B, C, and D (Pending); ATEX Class I, Zone 2, Ex nC IIC (Pending) Maritime: DNV, GL EMI: FCC Part 15, CISPR (EN55022) class A
EMS: EN61000-4-2 (ESD), level 2 EN61000-4-3 (RS), level 3 EN61000-4-4 (EFT), level 2 EN61000-4-5 (Surge), level 3 EN61000-4-6 (CS), level 3 EN61000-4-8 EN61000-4-11 EN61000-4-12Shock: IEC 60068-2-27Freefall: IEC 60068-2-32Vibration: IEC 60068-2-6MTBF: 240,000 hrs Database: Telcordia (Bellcore), GB*Please check Moxa’s website for the most up-to-date certification status.
Warranty5 years (see www.moxa.com/warranty for details)
Optional AccessoriesABC-01:• Industrial RS-232, RJ45-based, automatic backup configuratorEDS-SNMP OPC Server Pro:• CD with EDS-SNMP OPC server software and manual DR-4524:• 45W/2A DIN-Rail 24 VDC power supply, 85 to 264 VAC inputDR-75-24:• 75W/3.2A DIN-Rail 24 VDC power supply, 85 to 264 VAC inputDR-120-24:• 120W/5A DIN-Rail 24 VDC power supply, 88 to 132 VAC/176 to 264 VAC input by switchWK-46:• Wall mounting kitRK-4U: • 4U-high 19” rack mounting kit
Managed Ethernet Switches EDS-518A
www.moxa.com emai l : [email protected] 2-12
2
Managed Ethernet Sw
itches
Industrial Ethernet Solutions for Control and Automation
EDS-510A Series
Introduction
The EDS-510A Gigabit managed redundant Ethernet switch is equipped with up to 3 Gigabit Ethernet ports, making it ideal for building a Gigabit Turbo Ring, but leaving a spare Gigabit port for uplink use. The Ethernet redundant Turbo Ring (recovery time < 20 ms) and RSTP/STP (IEEE 802.1w/D) can increase system reliability
and the availability of your network backbone. The EDS-510A series is designed especially for communication demanding applications such as process control, shipbuilding, ITS, and DCS systems, which can benefit from a scalable backbone construction.
2 Gigabit Ethernet ports for redundant ring and 1 Gigabit Ethernet ›port for uplink solutionTurbo Ring (recovery time < 20 ms), RSTP/STP (IEEE 802.1w/D) ›for Ethernet redundancyQoS, IGMP snooping/GMRP, VLAN, LACP, SNMPv1/v2c/v3, RMON ›supportedIEEE 802.1X, HTTPS, and SSH › enhance network securityABC-01 (Automatic Backup Configurator) for system configuration ›backup
EDS-510A
Features and BenefitsTurbo Ring (recovery time < 20 ms at full load) and RSTP/STP •(IEEE 802.1w/D)IGMP snooping and GMRP for filtering multicast traffic•Port-based VLAN, IEEE 802.1Q VLAN, and GVRP to ease network •planningQoS-IEEE 802.1p/1Q and TOS/DiffServ to increase determinism•Port Trunking for optimum bandwidth utilization•IEEE 802.1X, HTTPS, and SSH to enhance network security•SNMPv1/v2c/v3 for different levels of network management•
RMON for efficient network monitoring and proactive capability•Bandwidth management prevents unpredictable network status•Lock port function for blocking unauthorized access based on MAC •addressPort mirroring for online debugging•Automatic warning by exception through e-mail, relay output•Digital inputs to integrate sensors and alarms with IP networks•
SpecificationsTechnologyStandards: IEEE 802.3 for 10BaseT, IEEE 802.3u for 100BaseT(X) and 100Base FX, IEEE 802.3ab for 1000Base(X), IEEE 802.3z for 1000BaseSX/LX/LHX/ZX, IEEE 802.3x for Flow Control, IEEE 802.1D for Spanning Tree Protocol, IEEE 802.1w for Rapid STP, IEEE 802.1Q for VLAN Tagging, IEEE 802.1p for Class of Service, IEEE 802.1X for Authentication, IEEE 802.3ad for Port Trunk with LACPProtocols: IGMPv1/v2 device, GMRP, GVRP, SNMPv1/v2c/v3, DHCP Server/Client, DHCP Option 82, BootP, TFTP, SNTP, SMTP, RARP, RMON, HTTP, HTTPS, Telnet, SSH, Syslog MIB: MIB-II, Ethernet-Like MIB, P-BRIDGE MIB, Q-BRIDGE MIB, Bridge MIB, RSTP MIB, RMON MIB Group 1, 2, 3, 9Flow Control: IEEE 802.3x flow control, back pressure flow control
7+3G-port Gigabit managed Ethernet switch
Switch Properties Priority Queues: 4Max. Number of Available VLANs: 64VLAN ID Range: VID 1 to 4094IGMP Groups: 256
InterfaceRJ45 Ports: 10/100BaseT(X) or 10/100/1000BaseT(X) auto negotiation speedFiber Ports: 1000BaseSFP slotConsole: RS-232 (RJ45)LED Indicators: PWR1, PWR2, FAULT, 10/100M (TP port), 1000M (Gigabit port), MASTER, COUPLERDIP Switch: Turbo Ring, Master, Coupler, ReserveAlarm Contact: Two relay outputs with current carrying capacity of 1A @ 24 VDCDigital Inputs: Two inputs with the same ground, but electrically isolated from the electronics.
emai l : [email protected] www.moxa.com 2-13
2
Managed
Ethernet Switches
0Overview
1
Modular
EthernetSwitches
3
5
6
7
8
9
10
12
Wireless
EthernetActive Ethernet I/O
Peer-to-PeerI/O
Modular
Remote I/O
Media
ConvertersAccessories
11
Unmanaged
EthernetSwitches
Rackmount
EthernetSwitches
VideoNetworkingProducts
OrderingInform
ation
4
Dimensions (unit = mm)
Ordering Information
Side View Front ViewDIN-Rail Kit Rear View Mounting Kit
+13 to +30V for state “1”•-30 to +3V for state “0”•Max. input current: 8 mA•
Power RequirementsInput Voltage: 24 VDC (12 to 45 VDC), redundant dual inputsInput Current (@ 24 V): 0.65A (EDS-510A-3GT)
0.44A (EDS-510A-1GT2SFP) 0.46A (EDS-510A-3SFP)
Connection: Two removable 6-pin terminal blocksOverload Current Protection: PresentReverse Polarity Protection: Present
Physical CharacteristicsCasing: IP30 protection, metal caseDimensions (W x H x D): 80.2 x 135 x 105 mm (3.16 x 5.31 x 4.13 in.)Weight: 1170 gInstallation: DIN-Rail mounting, wall mounting (optional kit)
Environmental LimitsOperating Temperature: 0 to 60°C (32 to 140°F) -40 to 75°C (-40 to 167°F) for T modelsStorage Temperature: -40 to 85°C (-40 to 185°F)Ambient Relative Humidity: 5 to 95% (non-condensing)
Regulatory ApprovalsSafety: UL508, UL60950-1, CSA C22.2 No. 60950-1, EN60950-1 Hazardous Location: UL/cUL Class I, Division 2, Groups A, B, C, and D;ATEX Class I, Zone 2, Ex nC IIC (Pending)Maritime: DNV, GLEMI: FCC Part 15, CISPR (EN55022) class AEMS: EN61000-4-2 (ESD), level 3 EN61000-4-3 (RS), level 3 EN61000-4-4 (EFT), level 3 EN61000-4-5 (Surge), level 2 EN61000-4-6 (CS), level 3 EN61000-4-8 EN61000-4-11 Shock: IEC 60068-2-27Freefall: IEC 60068-2-32Vibration: IEC 60068-2-6MTBF: 204,000 hrs Database: MIL-HDBK-217F, GB 25˚C *Please check Moxa’s website for the most up-to-date certification status.
Warranty5 years (see www.moxa.com/warranty for details)
Product ModelPort Interface
Gigabit Ethernet Fast Ethernet
Standard Temperature (0 to 60˚C)
Extended Temperature(-40 to 75˚C)
10/100/1000BaseT(X) 1000BaseSFP* 10/100BaseT(X)
EDS-510A-3GT EDS-510A-3GT-T 3 7EDS-510A-1GT2SFP EDS-510A-1GT2SFP-T 1 2 7EDS-510A-3SFP EDS-510A-3SFP-T 3 7
Optional AccessoriesABC-01: • Industrial RS-232, RJ45-based, automatic backup configuratorEDS-SNMP OPC Server Pro:• CD with EDS-SNMP OPC server software and manualDR-4524:• 45W/2A DIN-Rail 24 VDC power supply, 85 to 264 VAC inputDR-75-24:• 75W/3.2A DIN-Rail 24 VDC power supply, 85 to 264 VAC inputDR-120-24:• 120W/5A DIN-Rail 24 VDC power supply, 88 to 132 VAC/176 to 264 VAC input by switchWK-46:• Wall mounting kitRK-4U:• 4U-high, 19” rack mounting kit
* EDS-510A series supports up to 3 1000BaseSFP slots. Please see page 2-23 for the product information of SFP-1G series Gigabit Ethernet SFP modules.
Managed Ethernet Switches EDS-510A
www.moxa.com emai l : [email protected] 2-14
2
Managed Ethernet Sw
itches
Industrial Ethernet Solutions for Control and Automation
IntroductionEDS-516A/508A/505A are standalone 16, 8, and 5-port managed Ethernet switches. With its advanced Turbo Ring (recovery time < 20 ms) technology and RSTP/STP (IEEE 802.1w/D), the EDS-516A/508A/505A switches increase the reliability and availability of your industrial Ethernet network. Models with an extended operating temperature range of -40 to 75°C are also available. In addition,
the switches support several reliable and intelligent functions, including QoS, IGMP snooping/GMRP, VLAN, Port Trunking, SNMPv1/v2c/v3, IEEE 802.1X, HTTPS, SSH, and RMON, making the EDS-516A/508A/505A switches suitable for any harsh industrial environment.
EDS-516A/508A/505A Series
Plug-n-play Turbo Ring (recovery time < 20 ms), RSTP/STP ›(IEEE 802.1w/D) for Ethernet redundancyQoS, IGMP snooping/GMRP, VLAN, LACP, SNMPv1/v2c/v3, RMON ›supportedCustomer configured e-mail notification by exception ›User-friendly web-based configuration and management ›-40 to 75˚C operating temperature (T models) ›ABC-01 (Automatic Backup Configurator) for system configuration ›backup
EDS-516A/508A/505A
Features and BenefitsTurbo Ring (recovery time < 20 ms at full load) and RSTP/STP •(IEEE 802.1w/D)IGMP snooping and GMRP for filtering multicast traffic•Port-based VLAN, IEEE 802.1Q VLAN, and GVRP to ease network •planningQoS-IEEE 802.1p/1Q and TOS/DiffServ to increase determinism•Port Trunking for optimum bandwidth utilization•RMON for efficient network monitoring and proactive capability•
SNMPv1/v2c/v3 for different levels of network management security•IEEE 802.1X, HTTPS, and SSH to enhance network security•Bandwidth management prevents unpredictable network status•Lock port function for blocking unauthorized access based on MAC •addressPort mirroring for online debugging•Automatic warning by exception through e-mail, relay output•Digital inputs to integrate sensors and alarms with IP networks•
TechnologyStandards: IEEE 802.3 for 10BaseT, IEEE 802.3u for 100BaseT(X) and 100Base FX, IEEE 802.3x for Flow Control, IEEE 802.1D for Spanning Tree Protocol, IEEE 802.1w for Rapid STP, IEEE 802.1Q for VLAN Tagging, IEEE 802.1p for Class of Service, IEEE 802.1X for Authentication, IEEE 802.3ad for Port Trunk with LACPProtocols: IGMPv1/v2 device, GVRP, SNMPv1/v2c/v3, DHCP Server/Client, DHCP Option 82, BootP, TFTP, SNTP, SMTP, RARP, GMRP, LACP, RMON, HTTP, HTTPS, Telnet, SSH, Syslog
MIB: MIB-II, Ethernet-Like MIB, P-BRIDGE MIB, Q-BRIDGE MIB, Bridge MIB, RSTP MIB, RMON Group 1, 2, 3, 9
Flow Control: IEEE 802.3x flow control, back pressure flow control
Switch PropertiesPriority Queues: 4
Specifications
Max. Number of Available VLANs: 64
VLAN ID Range: VID 1 to 4094
IGMP Groups: 256
InterfaceRJ45 Ports: 10/100BaseT(X) auto negotiation speed, F/H duplex mode, and auto MDI/MDI-X connection
Fiber Ports: 100BaseFX ports (SC/ST connector)
Console: RS-232 (RJ45)
LED Indicators: PWR1, PWR2, FAULT, MASTER, COUPLER, 10/100M
DIP Switch: Turbo Ring, Master, Coupler, Reserve (508A and 505A only)
Alarm Contact: Two relay outputs with current carrying capacity of 1A @ 24 VDC
Digital Input: Two inputs with the same ground, but electrically isolated from the electronics.
+13 to +30V for state “1”•-30 to +3V for state “0”•Max. input current: 8 mA•
16-, 8-, and 5-port managed Ethernet switches
emai l : [email protected] www.moxa.com 2-15
2
Managed
Ethernet Switches
0Overview
1
Modular
EthernetSwitches
3
5
6
7
8
9
10
12
Wireless
EthernetActive Ethernet I/O
Peer-to-PeerI/O
Modular
Remote I/O
Media
ConvertersAccessories
11
Unmanaged
EthernetSwitches
Rackmount
EthernetSwitches
VideoNetworkingProducts
OrderingInform
ation
4
Dimensions (unit = mm)
Optical Fiber
* Single mode for EDS-508A and EDS-505A only.
Power RequirementsInput Voltage: 24 VDC (12 to 45 VDC), redundant dual inputs
Input Current (@ 24 V): 0.44A (EDS-516A), 0.51A (EDS-516A-MM), 0.26A/0.24A (EDS-508A/505A), 0.36A/0.35A (EDS-508A/505A-MM, EDS-508A/505A-SS)
Connection: Two removable 6-pin terminal blocks
Overload Current Protection: Present
Reverse Polarity Protection: Present
Physical CharacteristicsCasing: IP30 protection, metal case
Dimensions (W x H x D):
EDS-516A series: 94 x 135 x 142.7 mm (3.7 x 5.31 x 5.62 in.)
EDS-508A/505A series: 80.2 x 135 x 105 mm (3.16 x 5.31 x 4.13 in.)
Weight:
EDS-516A series: 1586 g
EDS-508A/505A series: 1040 g
Installation: DIN-Rail mounting, wall mounting (optional kit)
142.7 94
Side View Front ViewDIN-Rail Kit Rear View Mounting Kit
[ EDS-516A series ]
100BaseFX
Multi Mode Single ModeSingle Mode,
80 kmWavelength 1300 nm 1310 nm 1550 nmMax. TX -10 dBm 0 dBm 0 dBm
Min. TX -20 dBm -5 dBm -5 dBm
RX Sensitivity -32 dBm -34 dBm -34 dBm
Link Budget 12 dB 29 dB 29 dB
Typical Distance 5 km a
4 km b 40 km c 80 km d
Saturation -6 dBm -3 dBm -3 dBm
a. 50/125 μm, 800 MHz*km fiber optic cableb. 62.5/125 μm, 500 MHz*km fiber optic cablec. 9/125 μm, 3.5 PS/(nm*km) fiber optic cabled. 9/125 μm, 19 PS/(nm*km) fiber optic cable
Managed Ethernet Switches EDS-516A/508A/505A
Environmental LimitsOperating Temperature: 0 to 60°C (32 to 140°F) -40 to 75°C (-40 to 167°F) for T models
Storage Temperature: -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity: 5 to 95% (non-condensing)
Regulatory ApprovalsSafety: UL508, UL60950-1, CSA C22.2 No. 60950-1, EN60950-1
Hazardous Location: UL/cUL Class I, Division 2, Groups A, B, C, and D (EDS-516A Pending); ATEX Class I, Zone 2, Ex nC IIC (Pending)
Maritime: DNV, GL
EMI: FCC Part 15, CISPR (EN55022) class A
EMS: EN61000-4-2 (ESD), level 3 (EDS-508A/505A) / level 2 (EDS-516A)EN61000-4-3 (RS), level 3EN61000-4-4 (EFT), level 3 (EDS-508A/505A) / level 2 (EDS-516A)EN61000-4-5 (Surge), level 3EN61000-4-6 (CS), level 3EN61000-4-8 EN61000-4-11
Shock: IEC 60068-2-27
Freefall: IEC 60068-2-32
Vibration: IEC 60068-2-6
MTBF: EDS-516A series: 247,000 hrs
EDS-508A series: 339,000 hrs
EDS-505A series: 352,000 hrs
Database: Telcordia (Bellcore), GB*Please check Moxa’s website for the most up-to-date certification status.
Warranty5 years (see www.moxa.com/warranty for details)
www.moxa.com emai l : [email protected] 2-16
2
Managed Ethernet Sw
itches
Industrial Ethernet Solutions for Control and Automation
Dimensions (unit = mm)
Ordering Information
Side View Front ViewDIN-Rail Kit Rear View Mounting Kit
EDS-516A/508A/505A
Product Model Port Interface
Standard Temperature (0 to 60˚C)
Extended Temperature(-40 to 75˚C)
10/100BaseT(X)
100BaseFX
Multi Mode, SC Connector
Multi Mode, ST Connector
Single Mode, SC Connector
Single Mode, SC Connector,
80 km
EDS-516A Series
EDS-516A EDS-516A 16
EDS-516A-MM-SC EDS-516A-MM-SC-T 14 2
EDS-516A-MM-ST EDS-516A-MM-ST-T 14 2
EDS-508A/505A Series
EDS-508A/505A EDS-508A/505A-T 8/5
EDS-508A/505A-MM-SC EDS-508A/505A-MM-SC-T 6/3 2
EDS-508A/505A-MM-ST EDS-508A/505A-MM-ST-T 6/3 2
EDS-508A/505A-SS-SC EDS-508A/505A-SS-SC-T 6/3 2
EDS-508A/505A-SS-SC-80* EDS-508A-SS-SC-80-T 6/3 2
* EDS-505A-SS-SC-80 only supports a standard temperature model.
Optional AccessoriesABC-01: • Industrial RS-232, RJ45-based, automatic backup configuratorEDS-SNMP OPC Server Pro:• CD with EDS-SNMP OPC server software and manualDR-4524:• 45W/2A DIN-Rail 24 VDC power supply, 85 to 264 VAC inputDR-75-24:• 75W/3.2A DIN-Rail 24 VDC power supply, 85 to 264 VAC inputDR-120-24:• 120W/5A DIN-Rail 24 VDC power supply, 88 to 132 VAC/176 to 264 VAC input by switchWK-46:• Wall mounting kitRK-4U:• 4U-high, 19” rack mounting kit
[ EDS-508A/505A series ]
emai l : [email protected] www.moxa.com 2-17
2
Managed
Ethernet Switches
0Overview
1
Modular
EthernetSwitches
3
5
6
7
8
9
10
12
Wireless
EthernetActive Ethernet I/O
Peer-to-PeerI/O
Modular
Remote I/O
Media
ConvertersAccessories
11
Unmanaged
EthernetSwitches
Rackmount
EthernetSwitches
VideoNetworkingProducts
OrderingInform
ation
4
EDS-408A/405A Series
Features and BenefitsPlug-n-Play Turbo Ring (recovery time < 20 ms at full load) and •RSTP/STP (IEEE 802.1w/D) capabilityPort-based VLAN to ease network planning•QoS-IEEE 802.1p and TOS/DiffServ to increase determinism•RMON for efficient network monitoring and proactive capability•
Introduction
The EDS-408A/405A series Ethernet switches are entry-level 8 and 5-port managed Ethernet switches designed especially for industrial applications. The Ethernet switches support a variety of useful management functions, such as Turbo Ring, ring coupling, port-based VLAN, QoS, RMON, bandwidth management, port mirroring, and
warning by email or relay. The ready-to-use Turbo Ring can be set up easily using the web-based management interface, or with the DIP switches on the Ethernet switch’s top panel.
TechnologyStandards: IEEE 802.3 for 10BaseT,
IEEE 802.3u for 100BaseT(X) and 100Base FX,IEEE 802.3x for Flow Control,IEEE 802.1D for Spanning Tree Protocol,IEEE 802.1w for Rapid STP,IEEE 802.1p for Class of Service
Protocols: SNMPv1/v2c/v3, DHCP Server/Client, DHCP Option 82, BootP, TFTP, SNTP, SMTP, RARP, RMON, HTTP, Telnet, SyslogMIB: MIB-II, Ethernet-Like MIB, P-BRIDGE MIB, Bridge MIB, RSTP MIB, RMON Group 1, 2, 3, 9Flow Control: IEEE 802.3x flow control, back pressure flow control
InterfaceRJ45 Ports: 10/100BaseT(X) auto negotiation speed, F/H duplex mode, and auto MDI/MDI-X connectionFiber Ports: 100BaseFX ports (SC/ST connector) Console: RS-232 (RJ45)LED Indicators: PWR1, PWR2, FAULT, MASTER, COUPLER, 10/100MDIP Switch: Turbo Ring, Master, Coupler, ReserveAlarm Contact: One relay output with current carrying capacity of 1A @ 24 VDC
Optical Fiber
Power RequirementsInput Voltage: 24 VDC (12 to 45 VDC), redundant dual inputsInput Current (@ 24 V): 0.26A/0.24A (EDS-408A/405A), 0.35A/0.32A (EDS-408A/405A-MM, -SS)Connection: One removable 6-pin terminal blockOverload Current Protection: PresentReverse Polarity Protection: Present
Physical CharacteristicsCasing: IP30 protection, metal caseDimensions (W x H x D): 53.6 x 135 x 105 mm (3.17 x 5.31 x 4.13 in.)
Specifications
Plug-n-Play Turbo Ring with fast recovery time within 20 ms ›QoS, port-based VLAN, SNMPv1/v2c/v3, RMON supported ›Automatic warning by exception through e-mail, relay output ›User-friendly web-based configuration and management ›ABC-01 (Automatic Backup Configurator) for system configuration ›backup
SNMPv1/v2c/v3 for different levels of network management •securityBandwidth management prevents unpredictable network status•Port mirroring for online debugging•Automatic warning by exception through e-mail, relay output•
100BaseFX
Multi Mode Single Mode
Wavelength 1300 nm 1310 nmMax. TX -10 dBm 0 dBm
Min. TX -20 dBm -5 dBm
RX Sensitivity -32 dBm -34 dBm
Link Budget 12 dB 29 dB
Typical Distance 5 km a
4 km b 40 km c
Saturation -6 dBm -3 dBm
a. 50/125 μm, 800 MHz*km fiber optic cableb. 62.5/125 μm, 500 MHz*km fiber optic cablec. 9/125 μm, 3.5 PS/(nm*km) fiber optic cable
8- and 5-port entry-level managed Ethernet switches
Managed Ethernet Switches EDS-408A/405A
www.moxa.com emai l : [email protected] 2-18
2
Managed Ethernet Sw
itches
Industrial Ethernet Solutions for Control and Automation
Dimensions (unit = mm)
Ordering Information
Side View Front ViewDIN-Rail Kit Rear View Mounting Kit
Weight: 650 gInstallation: DIN-Rail mounting, wall mounting (optional kit)
Environmental LimitsOperating Temperature: 0 to 60°C (32 to 140°F) -40 to 75°C (-40 to 167°F) for T modelsStorage Temperature: -40 to 85°C (-40 to 185°F)Ambient Relative Humidity: 5 to 95% (non-condensing)
Regulatory ApprovalsSafety: UL508, UL60950-1, CSA C22.2 No. 60950-1, EN60950-1 Hazardous Location: UL/cUL Class I, Division 2, Groups A, B, C, and D; ATEX Class I, Zone 2, Ex nC IIC (Pending)Maritime: DNV, GLEMI: FCC Part 15, CISPR (EN55022) class A EMS: EN61000-4-2 (ESD), level 3
EN61000-4-3 (RS), level 3 (EDS-405A) / level 2 (EDS-408A)
EN61000-4-4 (EFT), level 3 (EDS-405A) / level 2 (EDS-408A)EN61000-4-5 (Surge), level 3 (EDS-405A) / level 2 (EDS-408A)EN61000-4-6 (CS), level 3 (EDS-405A) / level 2 (EDS-408A)EN61000-4-8EN61000-4-11
Shock: IEC 60068-2-27Freefall: IEC 60068-2-32Vibration: IEC 60068-2-6MTBF: EDS-408A series: 363,000 hrs EDS-405A series: 392,000 hrs Database: Telcordia (Bellcore), GB*Please check Moxa’s website for the most up-to-date certification status.
Warranty5 years (see www.moxa.com/warranty for details)
EDS-408A/405A
Product Model Port Interface
Standard Temperature(0 to 60˚C)
Extended Temperature(-40 to 75˚C)
10/100BaseT(X) 100BaseFX
Multi Mode, SC Connector
Multi Mode, ST Connector
Single Mode, SC Connector
EDS-408A/405A EDS-408A/405A-T 8/5
EDS-408A/405A-MM-SC EDS-408A/405A-MM-SC-T 6/3 2
EDS-408A/405A-MM-ST EDS-408A/405A-MM-ST-T 6/3 2
EDS-408A/405A-SS-SC EDS-408A/405A-SS-SC-T 6/3 2
Optional AccessoriesABC-01:• Industrial RS-232, RJ45-based, automatic backup configuratorEDS-SNMP OPC Server Pro:• CD with EDS-SNMP OPC server software and manualDR-4524:• 45W/2A DIN-Rail 24 VDC power supply, 85 to 264 VAC inputDR-75-24:• 75W/3.2A DIN-Rail 24 VDC power supply, 85 to 264 VAC inputDR-120-24:• 120W/5A DIN-Rail 24 VDC power supply, 88 to 132 VAC/176 to 264 VAC input by switchWK-46:• Wall mounting kitRK-4U: • 4U-high, 19” rack mounting kit
emai l : [email protected] www.moxa.com 2-19
2
Managed
Ethernet Switches
0Overview
1
Modular
EthernetSwitches
3
5
6
7
8
9
10
12
Wireless
EthernetActive Ethernet I/O
Peer-to-PeerI/O
Modular
Remote I/O
Media
ConvertersAccessories
11
Unmanaged
EthernetSwitches
Rackmount
EthernetSwitches
VideoNetworkingProducts
OrderingInform
ation
4
PX-1510 Series
Introduction
The PX-1510 series Ethernet switches are Gigabit managed redundant Ethernet switches that come standard with 4 10/100BaseT(X) 802.3af (PoE) compliant Ethernet ports and 3 combo Gigabit Ethernet ports. The PX-1510 Ethernet switches provide up to 15.4 watts of power per PoE port, and allow power to be supplied to connected devices (such as surveillance cameras, wireless access points, and IP phones) when AC power is not readily available or cost-prohibitive to provide locally. The PX-1510 Ethernet switches are highly versatile, and their
SFP fiber port can transmit data up to 80 km from the device to the control center with high EMI immunity. The Ethernet switches support a variety of management functions, including Turbo Ring, RSTP/STP, IGMP, VLAN, QoS, RMON, bandwidth management, and port mirroring. The PX-1510 series is designed especially for security automation applications such as IP surveillance, and gate of entry systems, which can benefit from a scalable backbone construction and Power-over-Ethernet support.
4 IEEE 802.3af-compliant PoE and Ethernet combo ports ›Provides up to 15.4 watts at 48 VDC per PoE port ›Intelligent power consumption detection, classification, and PoE ›scheduling function 3 combo (10/100/1000BaseT(X) or 100/1000BaseSFP slot) Gigabit ›ports; 2 ports for redundant ring and 1 port for uplinkTurbo Ring (recovery time < 20 ms), RSTP/STP (IEEE 802.1w/D) ›for Ethernet redundancyQoS, IGMP snooping/GMRP, VLAN, LACP, SNMPv1/v2c/v3, ›RMON, IEEE 802.1X, HTTPS, and SSH supported
Features and BenefitsIEEE 802.3af Power-over-Ethernet Technology•Turbo Ring (recovery time < 20 ms at full load) and RSTP/STP (IEEE •802.1w/D)IGMP snooping and GMRP for filtering multicast traffic•Port-based VLAN, IEEE 802.1Q VLAN, and GVRP to ease network •planningQoS-IEEE 802.1p/1Q and TOS/DiffServ to increase determinism•Port Trunking for optimum bandwidth utilization•
IEEE 802.1X, HTTPS, and SSH to enhance network security•SNMPv1/v2c/v3 for different levels of network management•RMON for efficient network monitoring and proactive capability•Bandwidth management prevents unpredictable network status•Lock port function for blocking unauthorized access based on MAC •addressPort mirroring for online debugging•Automatic warning by exception through e-mail, relay output•Digital inputs to integrate sensors and alarms with IP networks•
SpecificationsTechnologyStandards: IEEE 802.3af for Power-over-Ethernet, IEEE 802.3 for 10BaseT, IEEE 802.3u for 100BaseT(X) and 100Base FX, IEEE 802.3ab for 1000Base(X), IEEE 802.3z for 1000BaseSX/LX/LHX/ZX, IEEE 802.3x for Flow Control, IEEE 802.1D for Spanning Tree Protocol, IEEE 802.1w for Rapid STP, IEEE 802.1Q for VLAN Tagging, IEEE 802.1p for Class of Service, IEEE 802.1X for Authentication, IEEE 802.3ad for Port Trunk with LACPProtocols: IGMPv1/v2 device, GMRP, GVRP, SNMPv1/v2c/v3, DHCP Server/Client, DHCP Option 82, BootP, TFTP, SNTP, SMTP, RARP, RMON, HTTP, HTTPS, Telnet, SSH, SyslogMIB: MIB-II, Ethernet-Like MIB, P-BRIDGE MIB, Q-BRIDGE MIB, Bridge MIB, RSTP MIB, RMON MIB Group 1, 2, 3, 9Flow Control: IEEE 802.3x flow control, back pressure flow control
7+3G-port Gigabit PoE managed Ethernet switch
Managed Ethernet Switches PX-1510
Switch Properties Priority Queues: 4Max. Number of Available VLANs: 64VLAN ID Range: VID 1 to 4094IGMP Groups: 256
InterfaceRJ45 Ports: 10/100BaseT(X) or 10/100/1000BaseT(X) auto negotiation speedFiber Ports: 100/1000BaseSFP slotConsole: RS-232 (RJ45)LED Indicators: PWR1, PWR2, FAULT, 10/100M (TP port), 1000M (Gigabit port), MASTER, COUPLER, PoEDIP Switch: Turbo Ring, Master, Coupler, ReserveAlarm Contact: Two relay outputs with current carrying capacity of 0.5A @ 48 VDCDigital Inputs: Two inputs with the same ground, but electrically isolated from the electronics.
Preliminary
www.moxa.com emai l : [email protected] 2-20
2
Managed Ethernet Sw
itches
Industrial Ethernet Solutions for Control and Automation
Dimensions (unit = mm)
Ordering Information
PX-1510
PoE
PowerXpan
d
10M100M 1000M
10 7
6
5
4
3
2
1
9
8
10
9
8
Side View Front ViewDIN-Rail Kit Rear View Mounting Kit
+13 to +30V for state “1”•-30 to +3V for state “0”•Max. input current: 8 mA•
PoE (per port)Max. Output Power: 15.4WOutput Voltage: 44 to 48.5 VDCMax. Output Current: 350 mA Max. Overload Protection: 400 mA
Power RequirementsInput Voltage: 48 (46 to 50V) VDC, redundant dual inputsConnection: Two removable 6-pin terminal blocksOverload Current Protection: PresentReverse Polarity Protection: Present
Physical CharacteristicsCasing: IP30 protection, metal caseDimensions (W x H x D): 80.2 x 135 x 105 mm (3.16 x 5.31 x 4.13 in.)Weight: 1170 gInstallation: DIN-Rail mounting, wall mounting (optional kit)
Environmental LimitsOperating Temperature: 0 to 60°C (32 to 140°F) -40 to 75°C (-40 to 167°F) for T modelsStorage Temperature: -40 to 85°C (-40 to 185°F)Ambient Relative Humidity: 5 to 95% (non-condensing)
Regulatory ApprovalsSafety: UL508 (Pending), EN60950-1 (Pending)Hazardous Location: UL/cUL Class I, Division 2, Groups A, B, C, and D (Pending); ATEX Class I, Zone 2, Ex nC IIC (Pending)Maritime: DNV (Pending), GL (Pending)Traffic Control: NEMA TS2 (Pending)EMI: FCC Part 15, CISPR (EN55022) class AEMS: EN61000-4-2 (ESD), level 3 EN61000-4-3 (RS), level 3 EN61000-4-4 (EFT), level 3 EN61000-4-5 (Surge), level 2 EN61000-4-6 (CS), level 3 EN61000-4-8 EN61000-4-11 Shock: IEC 60068-2-27Freefall: IEC 60068-2-32Vibration: IEC 60068-2-6*Please check Moxa’s website for the most up-to-date certification status.
Warranty5 years (see www.moxa.com/warranty for details)
Product ModelPort Interface
Gigabit Ethernet Fast Ethernet
Standard Temperature (0 to 60˚C)
Extended Temperature(-40 to 75˚C)
Combo Port,10/100/1000BaseT(X) or 100/1000BaseSFP*
PoE, 10/100BaseT(X) 10/100BaseT(X)
PX-1510-3GT PX-1510-3GT-T 3 4 3
Optional AccessoriesABC-01: • Industrial RS-232, RJ45-based, automatic backup configuratorSPL-24: • PoE splitter, maximum output of 12.95W at 24 VDC, 0 to 60˚CSPL-24-T: • PoE splitter, maximum output of 12.95W at 24 VDC, -40 to 75˚CEDS-SNMP OPC Server Pro:• CD with EDS-SNMP OPC server software and manualDR-120-48:• 120W/2.5A DIN-Rail 48 VDC power supply with 88 to 132 VAC/176 to 264 VAC input by switchWK-46:• Wall mounting kitRK-4U:• 4U-high, 19” rack mounting kit
* PX-1510 series supports up to 3 100/1000BaseSFP slots. Please see page 2-23 for the product information of SFP-1G series Gigabit Ethernet SFP modules.
PX-1510
emai l : [email protected] www.moxa.com 2-21
2
Managed
Ethernet Switches
0Overview
1
Modular
EthernetSwitches
3
5
6
7
8
9
10
12
Wireless
EthernetActive Ethernet I/O
Peer-to-PeerI/O
Modular
Remote I/O
Media
ConvertersAccessories
11
Unmanaged
EthernetSwitches
Rackmount
EthernetSwitches
VideoNetworkingProducts
OrderingInform
ation
4
Network management software for monitoring industrial networks
Moxa NMS
Moxa NMS’s remote management capability provides an integrated environment for managing your industrial Ethernet infrastructure.
Introduction
Configuration ManagementMoxa NMS provides comprehensive, easy-to-use tools for network operators to configure Moxa’s managed Ethernet switches. You will find the configuration file management, firmware management, and topology recognition tools particularly useful. The user-friendly web UI, with firmware upgrade, auto-discovery topology, and more, makes it particularly easy to deploy your industrial Ethernet infrastructure.
Performance ManagementNetwork operators are able to monitor and analyze network traffic reports for each network device with Moxa NMS. Moxa NMS generates various trending graphs to monitor network performance, and with the full support of both standard and Moxa proprietary MIBs, Moxa NMS provides a complete data source for network performance analysis.
Fault ManagementFaults impair normal operation, and users expect to be kept informed of network status. Through Moxa NMS’s fault management system, an organized event list provides the operational status of the whole network. Color-coded icons on the topology map notify network operators the first time a network anomaly is detected.
•Auto-Discoverytocreatetopologymap
•Varioustrendinggraphstogenerateperformancereports
•Faultmanagementsystemtomonitornetworkanomalies
•Remotelyaccessiblethroughuser-friendlywebUI
Managed Ethernet Switches MoxaNMS
Features and Benefits
System RequirementsProcessor: x86 compatibleCPU, min. 1 GHz
RAM: 1 GB
Hard disk space: 500 MB free
Preliminary
www.moxa.com emai l : [email protected] 2-22
2
Managed Ethernet Sw
itches
Industrial Ethernet Solutions for Control and Automation
Introduction
•“BroadcastSearch”thenetworkforMoxa’smanagedEthernetswitches and any SNMP device
•Easytocreateandedittheconfigurationofconnecteddevicesinadvance
•EasytocreateandedittheMIBTemplatefordedicatedtagfileofanySNMP device
•User-definabletagfilemeetstherequirementsofmanydifferentapplications
EDS-SNMP OPC Server Pro
Windows NT/2000/XP, Administrator Privileges, Ethernet Card
Ordering Information
Features and Benefits
System Requirements
EDS-SNMP OPC Server Pro: CD with EDS-SNMP OPC Server Pro software and manual
Seamlessly integrate EDS-SNMP OPC Server Pro with the leading
HMI/SCADA software to create a comprehensive Ethernet network
management solution for SNMP devices.
EDS-SN
MP O
PC Server Pro
Moxa’s EDS-SNMP OPC Server Pro provides a user-editable Tag file for any SNMP device. Use the default MIB file, or create and edit a standard or private MIB to generate a dedicated Tag file. This powerful function lets operators use an existing HMI software environment to create a customized and real time view of the integrity of all Ethernet network devices, the overall Ethernet network traffic volume, and overall Ethernet network status. Moxa’s managed Ethernet switches are ideally suited for connecting Ethernet-enabled industrial devices
in your mission critical applications. Combined with EDS-SNMP OPC Server Pro software, your HMI (Human Machine Interface) packages and SCADA (Supervisory Control And Data Acquisition) software will be turned into a complete remote network traffic and status monitoring tool. This solution gives control engineers the power to monitor the network from a central location with existing and familiar visualization and control applications.
OPC server for integrating SNMP devices into HMI/SCADA systems
emai l : [email protected] www.moxa.com 2-23
2
Managed
Ethernet Switches
0Overview
1
Modular
EthernetSwitches
3
5
6
7
8
9
10
12
Wireless
EthernetActive Ethernet I/O
Peer-to-PeerI/O
Modular
Remote I/O
Media
ConvertersAccessories
11
Unmanaged
EthernetSwitches
Rackmount
EthernetSwitches
VideoNetworkingProducts
OrderingInform
ation
4
Dimensions (unit = mm)
4555.5
56.6
6.25RXTX
13.3
5
8.458.2
0.6
0.4
13.4
8.40
1.68
13.7
14
14.6
0.4
Side View
Rear View
Top View
SFP-1G Series
InterfaceGigabit Port: 1 portConnector: Duplex LC Connector or Simplex LC Connector* (WDM-type only)* WDM-type SFP modules must be used in pairs (e.g., SFP-1GXXALC and SFP-
1GXXBLC)
Optical Fiber
Specifications
Compliant with IEEE 802.3z ›Differential LVPECL inputs and outputs ›Single power supply 3.3V ›TTL signal detect indicator ›Hot Pluggable ›Class 1 laser product, complies with EN60825-1 ›
EN : 60825
Gigabit Ethernet
SFP-SX SFP-LX SFP-LHX SFP-ZX
Wavelength 850 nm 1310 nm 1310 nm 1550 nmMax. TX -4 dBm -3 dBm 1 dBm 5 dBm
Min. TX -9.5 dBm -9.5 dBm -4 dBm 0 dBm
RX Sensitivity -18 dBm -20 dBm -24 dBm 24 dBm
Link Budget 8.5 dB 10.5 dB 20 dB 24 dB
Typical Distance 550 m a
275 m b1100 m c
550 m d
10 km e40 km e 80 km f
Saturation 0 dBm -3 dBm -3 dBm -3 dBm
Gigabit Ethernet
SFP-10A SFP-10B SFP-20A SFP-20B SFP-40A SFP-40B
Wave-length
TX 1310 nm,RX 1550 nm
TX 1550 nm,RX 1310 nm
TX 1310 nm,RX 1550 nm
TX 1550 nm,RX 1310 nm
TX 1310 nm,RX 1550 nm
TX 1550 nm,RX 1310 nm
Max. TX -3 dBm -2 dBm 2 dBm
Min. TX -9 dBm -8 dBm -3 dBm
RX Sensitivity -21 dBm -23 dBm -23 dBm
Link Budget 12 dB 15 dB 20 dB
Typical Distance 10 km ef 20 km ef 40 km ef
Saturation -1 dBm -1 dBm -1 dBm
a. 50/125 μm, 400 MHz*km fiber optic cableb. 62.5/125 μm, 200 MHz*km fiber optic cablec. 50/125 μm, 800 MHz*km fiber optic cabled. 62.5/125 μm, 500 MHz*km fiber optic cablee. 9/125 μm, 3.5 PS/(nm*km) fiber optic cable f. 9/125 μm, 19 PS/(nm*km) fiber optic cable
Environmental LimitsOperating Temperature: 0 to 60°C (32 to 140°F) -40 to 85°C (-40 to 185°F) for T modelsStorage Temperature: -40 to 85°C (-40 to 185°F)Ambient Relative Humidity: 5 to 95% (non-condensing)
Regulatory ApprovalsSafety: UL, TÜV, EN60825-1
1G-port Gigabit Ethernet SFP modules
Managed Ethernet Switches SFP-1G
www.moxa.com emai l : [email protected] 2-24
2
Managed Ethernet Sw
itches
Industrial Ethernet Solutions for Control and Automation
Ordering Information
WDM-type (BiDi) SFP ModulesProduct Model Port Interface
Standard Temperature(0 to 60˚C)
Extended Temperature(-40 to 85˚C)
1000BaseSFP, LC Connector, 10 km
1000BaseSFP,LC Connector, 20 km
1000BaseSFP,LC Connector, 40 km
TX 1310 nm, RX 1550 nm
TX 1550 nm, RX 1310 nm
TX 1310 nm, RX 1550 nm
TX 1550 nm, RX 1310 nm
TX 1310 nm, RX 1550 nm
TX 1550 nm, RX 1310 nm
SFP-1G10ALC SFP-1G10ALC-T 1
SFP-1G10BLC SFP-1G10BLC-T 1
SFP-1G20ALC SFP-1G20ALC-T 1
SFP-1G20BLC SFP-1G20BLC-T 1
SFP-1G40ALC SFP-1G40ALC-T 1
SFP-1G40BLC SFP-1G40BLC-T 1
SFP ModulesProduct Model Port Interface
Standard Temperature(0 to 60˚C)
Extended Temperature(-40 to 85˚C)
1000BaseSX,LC Connector,
0.5 km
1000BaseLX, LC Connector,
10 km
1000BaseLHX,LC Connector,
40 km
1000BaseZX,LC Connector,
80 km
SFP-1GSXLC SFP-1GSXLC-T* 1
SFP-1GLXLC SFP-1GLXLC-T 1
SFP-1GLHXLC SFP-1GLHXLC-T 1
SFP-1GZXLC SFP-1GZXLC-T 1
* SFP-1GSXLC-T: -20 to 75˚C operating temperature
SFP-1G
Matched ProductsEDS-828/728 series:• IM-2GSFP series Gigabit Ethernet interface moduleEDS-G509 series:• 9G-port full Gigabit managed Ethernet switchesEDS-518A series:• 16+2G-port Gigabit managed Ethernet switchesEDS-510A series:• 7+3G-port Gigabit managed Ethernet switchesPX-1510 series:• 7+3G-port Gigabit PoE managed Ethernet switchesPT and IKS • series: PM-7200-2G/4G series Gigabit Ethernet interface modulesEDS-G308 series: • 8G-port full Gigabit unmanaged Ethernet switchesIMC-101G series:• Industrial Gigabit media converters
Unmanaged Ethernet Switches
Solution Tutorial 3-2
EDS-G308 8G-port full Gigabit unmanaged Ethernet switch 3-5
EDS-P308 8-port IEEE 802.3af PoE unmanaged Ethernet switch 3-7
EDS-305-M12 5-port M12/IP67 unmanaged Ethernet switch 3-10
EDS-316/309/308/305 16, 9, 8, and 5-port unmanaged Ethernet switches 3-12
EDS-208A/205A/208/205 8 and 5-port entry-level unmanaged Ethernet switches 3-15
Unmanaged Ethernet Switches
3
Industrial Ethernet Solutions for Control and Automation
www.moxa.com emai l : [email protected] 3-2
Industrial Ethernet Solutions for Control and Automation
3
Unmanaged Ethernet Sw
itches
Unmanaged Switches for Harsh Environments
Solution Tutorial
Adapted for Any Tough Environment
Gigabit Fiber Optic Cable (1000BaseSX/LX/LHX/ZX)Fiber Optic Cable (100BaseFX)Twisted Pair Cable (10/100BaseT(X) or 10/100/1000BaseT(X))Power over EthernetPower
EDS-316/309/308/305 Unmanaged
Ethernet Switch
EDS-305-M12 M12/IP67
Unmanaged Ethernet Switch
EDS-P308 PoE Unmanaged Ethernet Switch
EDS-208A/205A/208/205
Entry-level Unmanaged
Ethernet Switch
Entry-levelMedia
Converter
SPL-24PoE Splitter
IndustrialMedia
Converter
Industrial Media Converter
Industrial Media Converter
Industrial GigabitMedia Converter
Server
PoE Device Non PoE DeviceDNVGL
UL508UL/cUL60950-1
48 VDC Power Supply
EDS-G308 Full Gigabit Unmanaged Ethernet Switch
EDS-316/309/308/305
Gigabit ManagedEthernet Switch
EDS-316/309/308/305
emai l : [email protected] www.moxa.com 3-3
3
Unmanaged
Ethernet Switches
0Overview
5
4
6
7
8
9
10
12
Wireless
EthernetActive Ethernet I/O
Peer-to-PeerI/O
Modular
Remote I/O
Media
ConvertersAccessories
11
2
1
Modular
EthernetSwitches
Rackmount
EthernetSwitches
Managed
EthernetSwitches
OrderingInform
ation
VideoNetworkingProducts
Industrial environments often involve unknown, hazardous factors that can influence the operation of Ethernet devices. In fact, some of the factors could cause serious disasters or the loss of life and property.
Many of Moxa’s industrial products have received UL508 and UL60950-1 certifications, which were developed to indicate which industrial control and information technology equipment is suitable
for hazardous locations such as maritime environments, mines, oil refineries, and other industrial settings. In addition, UL/cUL Class 1 Division 2, ATEX IIG3 C1Z2, and DNV and GL maritime type approvals have strict standards for testing and determining which devices can be used safely and reliably in these critical environments.
Certified to Meet Industrial Reliability Standards
Special Offerings of M12, IP67, and Power-over-Ethernet Ethernet Switches
Advanced Features for Enhanced Reliability and Operation
M12/IP67 Solution
The EDS-305-M12 is rated to provide IP67-level protection, which means that the Ethernet switch will not be affected by tiny dust particles, dirt, water, humidity, or vibration in most industrial
environments. In addition, the EDS-305-M12 is designed to operate reliably in a temperature range of -40 to 75˚C.
Some industries have special demands, such as tight and robust Ethernet connections or providing power to inaccessible locations.
Moxa offers EDS-305-M12 series to ensure stable connection and EDS-P308 series to fit security and remote applications.
Power-over-Ethernet Solution
Redundant Power Inputs
The EDS-G308/P308/316/309/308/305/200A series of unmanaged Ethernet switches provide two power inputs that can be connected simultaneously to live DC power sources. If one of the power inputs fails, the other live source acts as a backup to provide the Ethernet switch’s power needs automatically.
Ethernet PowerPower over Ethernet
Back-up Power Supply
PWR2
PWR1
DIN-Rail +24/48 VDC Power Supply
Relay Output Alarm for Port Breaks, Power Failure
The EDS-G308/P308/316/309/308/305 series of unmanaged Ethernet switches provide relay contact outputs to warn technicians on the shop floor when the power fails or a port link breaks, so that they can respond quickly with appropriate emergency operation procedures.
Warning Notification
EDS-P308PoE Ethernet Switch
SPL-24PoE Splitter
Non-PoE Device
24 VDC outputData on
Ethernet48 VDC Power Supply
Wireless Access PointMoxa provides a complete range of solutions for any IEEE 802.3af PoE compliant unit and Ethernet-enabled device. The EDS-P308 and SPL-24 (PoE Splitter) can be used to simplify wiring in the field, and provide a more versatile environment for installing devices. The devices can be placed up to 328 feet (100 m) from a PSE.
Solution TutorialUnmanaged Ethernet Switches
www.moxa.com emai l : [email protected] 3-4
Industrial Ethernet Solutions for Control and Automation
3
Unmanaged Ethernet Sw
itches
Broadcast Storm Protection
Moxa’s unmanaged Ethernet switches are protected from receiving too many broadcast packets. During normal use, broadcast packets will be forwarded to all ports except the source port. However, unmanaged Ethernet switches will discard broadcast or multicast packets if the
number of those packets exceeds a threshold in a preset period of time. When the preset time period expires, the switch will then resume receiving broadcast or multicast packets until the threshold is reached again.
VLAN Tag Packets Transmitted Transparently
The IEEE 802.1Q standard defines a VLAN tag that includes TPID control (information) with an additional 4 bytes inserted into an untagged Ethernet frame. Moxa’s unmanaged Ethernet switches can
transmit and receive these data packets without modifying the packets in any way.
Solution Tutorial
Comparison Chart for Unmanaged Ethernet Switches
Model
EDS-G308 8 8 - - - √ √ √
EDS-P308 8 - 4 4 - √ √ √ √
EDS-305-M12 5 - - - 5 √
EDS-316 16 - 16 - - √ √ √ √ √ √
EDS-309 9 - 9 - - √ √ √ √ √ √ / √
EDS-308 8 - 8 - - √ √ √ √ √ √ / √
EDS-305 5 - 5 - - √ √ √ √ √ √ √
EDS-208A 8 - 8 - - √
EDS-205A 5 - 5 - - √
EDS-208 8 - 8 - - √ √
EDS-205 5 - 5 - - √
The EDS-G308, EDS-305-M12, and EDS-200A/200 unmanaged Ethernet switches allow users to use either a 24 VDC or 24 VAC power input. The 24 VAC power input is specially designed for applications in the building automation field where the power input source is often
restricted. The EDS-G308, EDS-305-M12 and EDS-200A/200 Ethernet switches are low-cost, versatile solutions suitable for all industrial applications.
DC or AC Power Input Options
Tota
l Num
ber o
f Por
tsGi
gabi
t Eth
erne
t (1
0/10
0/10
00 M
bps)
Fast
Eth
erne
t (1
0/10
0 M
bps)
PoE,
Fas
t Eth
erne
t (1
0/10
0 M
bps)
M12
/IP67
, Fas
t Eth
erne
t (1
0/10
0 M
bps)
Alar
m C
onta
ct
Pow
er R
edun
danc
y
-40
to 7
5˚C
UL/c
UL 6
0950
-1
UL50
8
EN50
155/
EN50
121-
4/EN
5012
1-3-
2
UL
/cUL
Cla
ss 1
, Div.
2/
ATEX
Cla
ss 1
, Zon
e 2
DNV/
GL
Available Pending *Please check Moxa’s website for the most up-to-date certification status.
Port Interface ApprovalsFeatures
emai l : [email protected] www.moxa.com 3-5
3
Unmanaged
Ethernet Switches
0Overview
5
4
6
7
8
9
10
12
Wireless
EthernetActive Ethernet I/O
Peer-to-PeerI/O
Modular
Remote I/O
Media
ConvertersAccessories
11
2
1
Modular
EthernetSwitches
Rackmount
EthernetSwitches
Managed
EthernetSwitches
OrderingInform
ation
VideoNetworkingProducts
8G-port full Gigabit unmanaged Ethernet switch
EDS-G308 Series
IntroductionThe EDS-G308 series is equipped with 8 Gigabit Ethernet ports and up to 2 fiber optic ports, making it ideal for applications that demand high bandwidth. The EDS-G308 series provides an economical solution for your industrial Gigabit Ethernet connection, and the built-in relay warning function alerts maintainers when power failures or port breaks occur. The EDS-G308 series includes 2 models: one with an operating temperature range of 0 to 60°C, and the other one with an extended
operating temperature range of -40 to 75°C. These 2 models pass through a 100% burn-in test to ensure that they fulfill the special needs of industrial automation control. The EDS-G308 series can be easily installed with DIN-Rail mounting as well as distribution boxes.
8 Gigabit Ethernet ports ›Fiber optic options for extending distance and electrical noise ›immunity Redundant dual 24 VDC power inputs ›Relay output warning for power failure and port break alarm ›Broadcast storm protection ›-40 to 75˚C operating temperature range (T models) ›
TechnologyStandards: IEEE 802.3 for 10BaseT,
IEEE 802.3u for 100BaseT(X) and 100Base FX,IEEE 802.3ab for 1000Base(X),IEEE 802.3z for 1000BaseSX/LX/LHX/ZX,IEEE 802.3x for Flow Control
Processing Type: Store and Forward Flow Control: IEEE 802.3x flow control, back pressure flow control
InterfaceRJ45 Ports: 10/100/1000BaseT(X) auto negotiation speed, F/H duplex mode, and auto MDI/MDI-X connectionFiber Ports: 100/1000BaseSFP slotLED Indicators: PWR1, PWR2, FAULT, 10/100/1000MDIP Switch: Port break alarm maskAlarm Contact: One relay output with current carrying capacity of 1A @ 24 VDC
Power RequirementsInput Voltage: 12/24/48 VDC (9.6 to 60 VDC), 24 VDC (18 to 30 VAC) (47 to 63 Hz) redundant inputs Connection: Removable 6-pin terminal blockReverse Polarity Protection: Present
Physical CharacteristicsCasing: IP30 protection, metal caseDimensions (W x H x D): 53.6 x 135 x 105 mm (2.11 x 5.31 x 4.13 in.)Weight: 630 gInstallation: DIN-Rail mounting, wall mounting (optional kit)
SpecificationsEnvironmental LimitsOperating Temperature: 0 to 60°C (32 to 140°F), -40 to 75°C (-40 to 167°F) for T modelsStorage Temperature: -40 to 85°C (-40 to 185°F)Ambient Relative Humidity: 5 to 95% (non-condensing)
Regulatory ApprovalsSafety: UL508 (Pending)Hazardous Location: UL/cUL Class 1, Division 2, Groups A, B, C and D (Pending); ATEX Class 1, Zone 2, Ex nC IIC (Pending)Maritime: DNV (Pending), GL (Pending)EMI: FCC Part 15, CISPR (EN55022) class AEMS: EN61000-4-2 (ESD), level 3 EN61000-4-3 (RS), level 3 EN61000-4-4 (EFT), level 3 EN61000-4-5 (Surge), level 3 EN61000-4-6 (CS), level 3Shock: IEC 60068-2-27Free Fall: IEC 60068-2-32Vibration: IEC 60068-2-6*Please check Moxa’s website for the most up-to-date certification status.
Warranty5 years (see www.moxa.com/warranty for details)
EDS-G308Unmanaged Ethernet Switches
Preliminary
www.moxa.com emai l : [email protected] 3-6
Industrial Ethernet Solutions for Control and Automation
3
Unmanaged Ethernet Sw
itches
Dimensions (unit = mm)
53.6
135
105
48.4
41.7
53.6 30.5
46.6
39.5
EDS-G308-2SFPEDS-G308
Mounting Kit Rear ViewFront ViewDIN-Rail KitSide View
EDS-G
308
Product Model Port Interface
Standard Temperature
(0 to 60˚C)
Extended Temperature
(-40 to 75˚C)
Gigabit Ethernet
10/100/1000BaseT(X)Combo port, 10/100/1000BaseT(X) or
100/1000BaseSFP*
EDS-G308 EDS-G308-T 8
EDS-G308-2SFP EDS-G308-2SFP-T 6 2
* EDS-G308-2SFP/EDS-G308-2SFP-T support up to 2 100/1000BaseSFP slots. Please see page 2-23 for the product information of SFP-1G series Gigabit Ethernet SFP modules.
Ordering Information
Optional AccessoriesDR-4524:• 45W/2A DIN-Rail 24 VDC power supply, 85 to 264 VAC inputDR-75-24:• 75W/3.2A DIN-Rail 24 VDC power supply, 85 to 264 VAC inputDR-120-24:• 120W/5A DIN-Rail 24 VDC power supply, 88 to 132 VAC/176 to 264 VAC input by switchWK-46:• Wall mounting kitRK-4U:• 4U-high 19” rack mounting kit
emai l : [email protected] www.moxa.com 3-7
3
Unmanaged
Ethernet Switches
0Overview
5
4
6
7
8
9
10
12
Wireless
EthernetActive Ethernet I/O
Peer-to-PeerI/O
Modular
Remote I/O
Media
ConvertersAccessories
11
2
1
Modular
EthernetSwitches
Rackmount
EthernetSwitches
Managed
EthernetSwitches
OrderingInform
ation
VideoNetworkingProducts
EDS-P308 Series
IntroductionThe EDS-P308 series switches are smart, 8-port, unmanaged Ethernet switches supporting PoE (Power-over-Ethernet) on ports 1 to 4. They are classified as power source equipment (PSE), and when used in this way, the EDS-P308 switches enable centralization of the power supply and provide up to 15.4 watts of power per port. The switches can be used to power IEEE 802.3af compliant powered devices (PD),
eliminating the need for additional wiring. The EDS-P308 switches support IEEE 802.3/802.3u/802.3x with 10/100M, full/half-duplex, MDI/MDI-X auto-sensing, and provide an economical solution for your industrial Ethernet network. In addition, the built-in relay warning function alerts network engineers when power failures or port breaks occur.
4 IEEE 802.3af compliant PoE and Ethernet combo ports ›Provides up to 15.4 watts at 48 VDC per PoE port ›Intelligent power consumption detection and classification ›Redundant dual VDC power inputs ›-40 to 75˚C operating temperature range (T models) ›
TechnologyStandards: IEEE 802.3 for 10BaseT,
IEEE 802.3u for 100BaseT(X) and 100BaseFX,IEEE 802.3x for Flow Control,IEEE 802.3af for Power-over-Ethernet
Processing Type: Store and ForwardFlow Control: IEEE 802.3x full duplex, back pressure flow control
InterfaceRJ45 Ports: 10/100BaseT(X) auto negotiation speed, F/H duplex mode, and auto MDI/MDI-X connectionFiber Ports: 100BaseFX ports (SC connector)LED Indicators: PWR1, PWR2, Fault, 10/100M, PoEDIP Switch: Port break alarm maskAlarm Contact: One relay output with current carrying capacity of 0.5A @ 48 VDC
Optical Fiber
Specifications
100BaseFXMulti Mode Single Mode
Wavelength 1300 nm 1310 nmMax. TX -10 dBm 0 dBm
Min. TX -20 dBm -5 dBm
RX Sensitivity -32 dBm -34 dBm
Link Budget 12 dB 29 dB
Typical Distance 5 km a
4 km b 40 km c
Saturation -6 dBm -3 dBm
a. 50/125 μm, 800 MHz*km fiber optic cableb. 62.5/125 μm, 500 MHz*km fiber optic cablec. 9/125 μm, 3.5 PS/(nm*km) fiber optic cable
8-port IEEE 802.3af PoE unmanaged Ethernet switch
EDS-P308Unmanaged Ethernet Switches
Power RequirementsInput Voltage: 48 (46 to 50V) VDC, redundant inputsInput Current (@ 48 V): 1.6AConnection: Removable 6-pin terminal blockOverload Current Protection: 2.5A (@ 48 VDC)Reverse Polarity Protection: Present
PoE (per port)Max. Output Power: 15.4WOutput Voltage: 44 to 48.5 VDCMax. Output Current: 350 mA Max. Overload Protection: 400 mA
Physical CharacteristicsCasing: IP30 protection, metal caseDimensions (W x H x D): 53.6 × 135 × 105 mm (2.11 x 5.31 x 4.13 in.)Weight: 840 gInstallation: DIN-Rail mounting, wall mounting (optional kit)
Environmental LimitsOperating Temperature: 0 to 60°C (32 to 140°F) -40 to 75°C (-40 to 167°F) for T modelStorage Temperature: -40 to 85°C (-40 to 185°F)Ambient Relative Humidity: 5 to 95% (non-condensing)
Regulatory ApprovalsSafety: UL508Hazardous Location: UL/cUL Class I, Division 2, Groups A, B, C, and D (Pending); ATEX Class I, Zone 2, Ex nC IIC (Pending) Maritime: DNV (Pending), GL (Pending)EMI: FCC Part 15, CISPR (EN55022) class A
www.moxa.com emai l : [email protected] 3-8
Industrial Ethernet Solutions for Control and Automation
3
Unmanaged Ethernet Sw
itches
Dimensions (unit = mm)
EDS-P308
Mounting Kit Rear ViewFront ViewDIN-Rail KitSide View Top and Bottom Views
TechnologyStandards: IEEE 802.3 for 10BaseT, IEEE 802.3u for 100BaseT(X) and 100BaseFX, IEEE 802.3af for Power-over-Ethernet
InterfaceRJ45 Ports: 10/100BaseT(X) for PoE IN and DATA OUTLED Indicators: Power
105 53.6 53.6 53.6
135
EMS: EN61000-4-2 (ESD), level 3 EN61000-4-3 (RS), level 3 EN61000-4-4 (EFT), level 3 EN61000-4-5 (Surge), level 3 EN61000-4-6 (CS), level 3 EN61000-4-8 EN61000-4-11Shock: IEC 60068-2-27
Freefall: IEC 60068-2-32Vibration: IEC 60068-2-6MTBF: 360,000 hrs
Database: Telcordia (Bellcore), GB*Please check Moxa’s website for the most up-to-date certification status.
Warranty5 years (see www.moxa.com/warranty for details)
IEEE 802.3af PoE splitter
IEEE 802.3af compliant, splits power and data from PoE equipment ›Supports output power up to 12.95 W at 24 VDC ›Short circuit protection for power output ›Auto disconnection if power input voltage is too high ›-40 to 75°C operating temperature range (T models) ›DIN-Rail mounting ability ›
SPL-24 Series
SpecificationsPower RequirementsInput Voltage: 44 to 75 VDCOutput Voltage: 24 VDCOutput Power: 12.95W (0.54A @ 24 VDC)Connection: Removable 3-pin terminal block for outputOverload Current Protection: 400 mA (@ 48 VDC input)Efficiency: 85% (at 25°C, fully loaded)
emai l : [email protected] www.moxa.com 3-9
3
Unmanaged
Ethernet Switches
0Overview
5
4
6
7
8
9
10
12
Wireless
EthernetActive Ethernet I/O
Peer-to-PeerI/O
Modular
Remote I/O
Media
ConvertersAccessories
11
2
1
Modular
EthernetSwitches
Rackmount
EthernetSwitches
Managed
EthernetSwitches
OrderingInform
ation
VideoNetworkingProducts
EDS-P308Unmanaged Ethernet Switches
Ordering Information Product Model Port Interface
Standard Temperature (0 to 60˚C)
Extended Temperature(-40 to 75˚C)
PoE, 10/100BaseT(X) 10/100BaseT(X)
100BaseFX
Mulit Mode,SC Connector
Single Mode,SC Connector
EDS-P308 EDS-P308-T 4 4
EDS-P308-M-SC EDS-P308-M-SC-T 4 3 1
EDS-P308-S-SC EDS-P308-S-SC-T 4 3 1
EDS-P308-MM-SC EDS-P308-MM-SC-T 4 2 2
EDS-P308-SS-SC EDS-P308-SS-SC-T 4 2 2
Dimensions (unit = mm)
Side View Rear ViewFront ViewSide View Top and Bottom Views
Optional AccessoriesSPL-24: • PoE splitter, maximum output of 12.95W at 24 VDC, 0 to 60˚CSPL-24-T:• PoE splitter, maximum output of 12.95W at 24 VDC, -40 to 75˚CDR-75-48:• 75W/1.6A DIN-Rail 48 VDC power supply with universal 85 to 264 VAC inputDR-120-48: • 120W/2.5A DIN-Rail 48 VDC power supply with 88 to 132 VAC/176 to 264 VAC input by switchWK-46:• Wall mounting kitRK-4U: • 4U-high 19” rack mounting kit
Physical CharacteristicsCasing: IP30 protection, plastic caseDimensions (W x H x D): 24.87 × 100 × 74 mm (0.98 x 3.93 x 2.91 in.)Weight: 95 gInstallation: DIN-Rail mounting
Environmental LimitsOperating Temperature: 0 to 60°C (32 to 140°F) -40 to 75°C (-40 to 167°F) for T modelStorage Temperature: -40 to 85°C (-40 to 185°F)Ambient Relative Humidity: 5 to 95% (non-condensing)
Regulatory ApprovalsSafety: UL508 (Pending) Hazardous Location: UL/cUL Class I, Division 2, Groups A, B, C, and D (Pending); ATEX Class I, Zone 2, Ex nC IIC (Pending) EMI: FCC Part 15, CISPR (EN55022) class A
EMS: EN61000-4-2 (ESD), level 3 EN61000-4-3 (RS), level 3 EN61000-4-4 (EFT), level 3 EN61000-4-5 (Surge), level 3 EN61000-4-6 (CS), level 3 EN61000-4-8 EN61000-4-11Shock: IEC 60068-2-27Freefall: IEC 60068-2-32Vibration: IEC 60068-2-6MTBF: 5,100,000 hrs Database: MIL-HDBK-217F, GB 25˚C *Please check Moxa’s website for the most up-to-date certification status.
Warranty 5 years (see www.moxa.com/warranty for details)
DIN-Rail Kit
www.moxa.com emai l : [email protected] 3-10
Industrial Ethernet Solutions for Control and Automation
3
Unmanaged Ethernet Sw
itches
5-port M12/IP67 unmanaged Ethernet switch
EDS-305-M12 Series
EDS-305-M
12
M12 connectors and IP67 rated case ›10/100BaseT(X), 4-pin M12 (D-coding), F/H duplex mode, and ›auto MDI/MDI-X connectionPower input: 12 to 45 VDC, 18 to 30 VAC ›-40 to 75˚C operating temperature range (T models) ›
TechnologyStandards: IEEE 802.3 for 10BaseT, IEEE 802.3u for 100BaseT(X) and 100BaseFX, IEEE 802.3x for Flow ControlProcessing type: Store and Forward, with IEEE 802.3x full duplex, non-blocking flow control
InterfaceM12 Ports: 10/100BaseT(X) auto negotiation speed, F/H duplex mode, and auto MDI/MDI-X connectionLED Indicators: Power, LNK/ACT
Power RequirementsInput Voltage: 12 to 45 VDC, 18 to 30 VAC (47 to 63 Hz) Input Current (@ 24 V): 0.12A @ 24 VDC; 0.28A @ 24 VACConnection: one M12 socket (A-coding), single power inputOverload Current Protection, Limited Current: 1.1A Reverse Polarity Protection: Present
Physical CharacteristicsCasing: IP67 protection, plastic caseDimensions (W x H x D): 60 x 125 x 29.6 mm (2.36 x 4.92 x 1.17 in.)Weight: 250 gInstallation: Field-style mounting, DIN-Rail mounting (optional kit)
Environmental LimitsOperating Temperature: 0 to 60°C (32 to 140°F), -40 to 75°C (-40 to 167°F) for T modelStorage Temperature: -40 to 85°C (-40 to 185°F)Ambient Relative Humidity: 5% to 95% (non-condensing)
Specifications
Regulatory ApprovalsSafety: UL508 (Pending)Rail Traffic: EN50155 (Pending), EN50121-4 (Pending), EN50121-3-2 (Pending)Hazardous Location: UL/cUL Class I, Division 2, Groups A and D (Pending); ATEX Class I, Zone 2, Ex nC IIC (Pending)Maritime: DNV (Pending), GL (Pending) EMI: FCC Part 15, CISPR (EN55022) class AEMS: EN61000-4-2 (ESD), level 3 EN61000-4-3 (RS), level 3 EN61000-4-4 (EFT), level 3 EN61000-4-5 (Surge), level 3 EN61000-4-6 (CS), level 2 EN61000-4-8 EN61000-4-11Shock: IEC 60068-2-27Freefall: IEC 60068-2-32Vibration: IEC 60068-2-6MTBF: 636,000hrs
Database: Telcordia (Bellcore), GB*Please check Moxa’s website for the most up-to-date certification status.
Warranty5 years (see www.moxa.com/warranty for details)
IntroductionThe EDS-305-M12 series Ethernet switches are IP67 rated for the toughest industrial applications. The EDS-305-M12’s rugged packaging and connectors guard against dust, water, and oil. The M12 connectors ensure tight and robust connections and protect your applications from disturbances, such as the vibration and
shock encountered in the transportation industry. In addition, these space-saving switches can be mounted virtually anywhere. Extended operating temperature models for -40 to 75°C operation are also available.
emai l : [email protected] www.moxa.com 3-11
3
Unmanaged
Ethernet Switches
0Overview
5
4
6
7
8
9
10
12
Wireless
EthernetActive Ethernet I/O
Peer-to-PeerI/O
Modular
Remote I/O
Media
ConvertersAccessories
11
2
1
Modular
EthernetSwitches
Rackmount
EthernetSwitches
Managed
EthernetSwitches
OrderingInform
ation
VideoNetworkingProducts
EDS-305-M12Unmanaged Ethernet Switches
Dimensions (unit = mm)
Ordering Information
Top View Side ViewFront View
EDS-305-M12:• Industrial M12/IP67 unmanaged Ethernet switch with 5 10/100BaseT(X) ports, 0 to 60°CEDS-305-M12-T:• Industrial M12/IP67 unmanaged Ethernet switch with 5 10/100BaseT(X) ports, -40 to 75°C
Optional AccessoriesDR-4524:• 45W/2A DIN-Rail 24 VDC power supply, 85 to 264 VAC inputDR-75-24:• 75W/3.2A DIN-Rail 24 VDC power supply, 85 to 264 VAC inputDR-120-24: • 120W/5A DIN-Rail 24 VDC power supply, 88 to 132 VAC/176 to 264 VAC input by switchDK-M12-305:• DIN-Rail mounting kit for EDS-305-M12 seriesM12 Patch Cords and Sensor Connectors:•
M12 Patch Cords
CBL-M12D(MM4P)/RJ45-100 IP671-meter M12-to-RJ45 Cat-5E UTP Ethernet cable with waterproof 4-pin D-coded M12
connector
BL-M12(FF5P)/OPEN-100 IP67 1-meter M12-to-5-pin power cable with waterproof 5-pin A-coded M12 connector
Sensor Connectors
M12D-4P-IP68 Field-installable D-coded screw-in sensor connector, male
M12A-5P-IP68 Field-installable A-coded screw-in sensor connector, female
2521
29.6
60
125
EDS-305-M12
www.moxa.com emai l : [email protected] 3-12
Industrial Ethernet Solutions for Control and Automation
3
Unmanaged Ethernet Sw
itches
16, 9, 8, and 5-port unmanaged Ethernet switches
EDS-316/309/308/305
EDS-316/309/308/305 Series
IntroductionThe EDS-316/309/308/305 are 16, 9, 8, and 5-port Ethernet switches that provide an economical solution for your industrial Ethernet connections. The built-in relay warning function alerts network engineers when power failures or port breaks occur, and the switches are designed for harsh industrial environments, such as in hazardous locations (Class 1, Div. 2/Zone 2). The switches comply with FCC, TÜV, UL,
and CE standards, and come in two model types: standard operating temperature range of 0 to 60°C, and extended operating temperature range of -40 to 75°C. Both models undergo a 100% burn-in test to ensure that they fulfill the special needs of industrial automation control. The EDS-316/309/308/305 series Ethernet switches can be installed easily on a DIN-Rail or in a distribution box.
Redundant dual 24 VDC power inputs ›Relay output warning for power failure and port break alarm ›Broadcast storm protection ›Transmits VLAN tagged packets transparently ›-40 to 75˚C operating temperature range (T models) ›
TechnologyStandards: IEEE 802.3 for 10BaseT,
IEEE 802.3u for 100BaseT(X) and 100BaseFX,IEEE 802.3x for Flow Control
Processing Type: Store and Forward Flow Control: IEEE 802.3x flow control, back pressure flow control
InterfaceRJ45 Ports: 10/100BaseT(X) auto negotiation speed, F/H duplex mode, and auto MDI/MDI-X connectionFiber Ports: 100BaseFX ports (SC/ST connector)LED Indicators: PWR1, PWR2, Fault, 10/100M (TP port), 100M (Fiber port)DIP Switch: Port break alarm maskAlarm Contact: One relay output with current carrying capacity of 1A @ 24 VDC
Optical Fiber
SpecificationsPower RequirementsInput Voltage: 24 VDC (12 to 45 VDC), redundant inputs (EDS-316/309)24 VDC (12 to 48 VDC), redundant inputs (EDS-308/305) (Input Current (@ 24 V):0.27A (EDS-316), 0.44A (EDS-316A, EDS-316-M, EDS-316A-S, EDS-316A-MM, EDS-316-SS, EDS-316-MS), 0.29A (EDS-309), 0.13A (EDS-308), 0.25A (EDS-308-M, EDS-308-S, EDS-308-MM, EDS-308-SS), 0.13A (EDS-305), 0.17A (EDS-305-M, EDS-305-S)
Overload Current Protection:1.6A (EDS-308-M, EDS-308-S, EDS-308-MM, EDS-308-SS, EDS-316, EDS-316-M, EDS-316-MM, EDS-316-MS, EDS-316-S, EDS-316-SS)1.1A (EDS-305, EDS-305-M, EDS-305-S, EDS-308)Connection: Removable 6-pin terminal blockReverse Polarity Protection: Present
Physical CharacteristicsCasing: IP30 protection, metal caseDimensions (W x H x D): EDS-316 series: 80.5 x 135 x 105 mm (3.16 x 5.31 x 4.13 in.)EDS-309/308/305 series: 53.6 x 135 x 105 mm (2.11 x 5.31 x 4.13 in.)Weight: EDS-316 series: 1140 g
EDS-309/308/305 series: 630 gInstallation: DIN-Rail mounting, wall mounting (optional kit)
Environmental LimitsOperating Temperature: 0 to 60°C (32 to 140°F), -40 to 75°C (-40 to 167°F) for T modelsStorage Temperature: -40 to 85°C (-40 to 185°F)Ambient Relative Humidity: 5 to 95% (non-condensing)
100BaseFX
Multi Mode Single Mode Single Mode, 80 km
Wavelength 1300 nm 1310 nm 1550 nmMax. TX -10 dBm 0 dBm 0 dBm
Min. TX -20 dBm -5 dBm -5 dBm
RX Sensitivity -32 dBm -34 dBm -34 dBm
Link Budget 12 dB 29 dB 29 dB
Typical Distance
5 km,2 km (EDS-316-T)a
40 km c 80 km d4 km,
2 km (EDS-316-T)b
Saturation -6 dBm -3 dBm -3 dBm
a. 50/125 μm, 800 MHz*km fiber optic cable b. 62.5/125 μm, 500 MHz*km fiber optic cable c. 9/125 μm, 3.5 PS/(nm*km) fiber optic cable d. 9/125 μm, 19 PS/(nm*km) fiber optic cable
emai l : [email protected] www.moxa.com 3-13
3
Unmanaged
Ethernet Switches
0Overview
5
4
6
7
8
9
10
12
Wireless
EthernetActive Ethernet I/O
Peer-to-PeerI/O
Modular
Remote I/O
Media
ConvertersAccessories
11
2
1
Modular
EthernetSwitches
Rackmount
EthernetSwitches
Managed
EthernetSwitches
OrderingInform
ation
VideoNetworkingProducts
Dimensions (unit = mm)
80.5
Mounting Kit
Mounting Kit
Rear View
Rear View
Front ViewDIN-Rail Kit
DIN-Rail Kit Front View
Side View
Side View
[ EDS-316 series ]
[ EDS-309/308/305 series ]
EDS-305-M-SC
2
4
6
1
3
5
7
100M
10MEDS-309-3M-SC
8
TX
RX
TX
RX
9
Ethe
rDev
ice
Swit
ch
FAULT
PWR2
PWR1
100M 100M
100M
53.6 53.6 53.6
Regulatory ApprovalsSafety: EDS-316 series: UL508, UL60950-1, EN60950-1EDS-309/308/305 series: UL508, UL60950-1, CSA C22.2 No. 60950-1, EN60950-1 Hazardous Location: UL/cUL Class 1, Division 2, Groups A, B, C and D (EDS-316 Pending); ATEX Class 1, Zone 2, Ex nC IIC (EDS-316/309/308 Pending)Maritime: DNV, GLEMI: FCC Part 15, CISPR (EN55022) class AEMS: EN61000-4-2 (ESD), level 3 EN61000-4-3 (RS), level 3 EN61000-4-4 (EFT), level 3 EN61000-4-5 (Surge), level 3 EN61000-4-6 (CS), level 3
Shock: IEC 60068-2-27Free Fall: IEC 60068-2-32Vibration: IEC 60068-2-6MTBF: EDS-316 series: 257,000 hrs
EDS-309 series: 396,000 hrsEDS-308 series: 255,000 hrsEDS-305 series: 422,000 hrsDatabase: MIL-HDBK-217F, GB 25˚C
*Please check Moxa’s website for the most up-to-date certification status.
Warranty5 years (see www.moxa.com/warranty for details)
EDS-316/309/308/305Unmanaged Ethernet Switches
www.moxa.com emai l : [email protected] 3-14
Industrial Ethernet Solutions for Control and Automation
3
Unmanaged Ethernet Sw
itches EDS-316/309/308/305
Product Model Port Interface
Standard Temperature
(0 to 60˚C)
Extended Temperature
(-40 to 75˚C)10/100BaseT(X)
100BaseFX
Multi Mode,SC Connector
Multi Mode,ST Connector
Single Mode,SC Connector
Single Mode,SC Connector,
80 km EDS-316 SeriesEDS-316 EDS-316-T 16
EDS-316-M-SC EDS-316-M-SC-T 15 1
EDS-316-M-ST EDS-316-M-ST-T 15 1
EDS-316-MM-SC EDS-316-MM-SC-T 14 2
EDS-316-MM-ST EDS-316-MM-ST-T 14 2
EDS-316-MS-SC EDS-316-MS-SC-T 14 1 1
EDS-316-S-SC EDS-316-S-SC-T 15 1
EDS-316-SS-SC EDS-316-SS-SC-T 14 2
EDS-316-MS-SC-80 14 1 1
EDS-316-S-SC-80 15 1
EDS-316-SS-SC-80 14 2
EDS-316-SS-SC-40/80 14 1 1
EDS-309 SeriesEDS-309-3M-SC EDS-309-3M-SC-T 6 3
EDS-309-3M-ST EDS-309-3M-ST-T 6 3
EDS-308 SeriesEDS-308 EDS-308-T 8
EDS-308-M-SC EDS-308-M-SC-T 7 1
EDS-308-MM-SC EDS-308-MM-SC-T 6 2
EDS-308-MM-ST EDS-308-MM-ST-T 6 2
EDS-308-S-SC EDS-308-S-SC-T 7 1
EDS-308-SS-SC EDS-308-SS-SC-T 6 2
EDS-308-S-SC-80 EDS-308-S-SC-80-T 7 1
EDS-308-SS-SC-80 EDS-308-SS-SC-80-T 6 2
EDS-305 Series EDS-305 EDS-305-T 5
EDS-305-M-SC EDS-305-M-SC-T 4 1
EDS-305-M-ST EDS-305-M-ST-T 4 1
EDS-305-S-SC EDS-305-S-SC-T 4 1
EDS-305-S-SC-80 4 1
Ordering Information
Optional AccessoriesDR-4524:• 45W/2A DIN-Rail 24 VDC power supply, 85 to 264 VAC inputDR-75-24:• 75W/3.2A DIN-Rail 24 VDC power supply, 85 to 264 VAC inputDR-120-24:• 120W/5A DIN-Rail 24 VDC power supply, 88 to 132 VAC/176 to 264 VAC input by switchWK-46:• Wall mounting kitRK-4U:• 4U-high 19” rack mounting kit
emai l : [email protected] www.moxa.com 3-15
3
Unmanaged
Ethernet Switches
0Overview
5
4
6
7
8
9
10
12
Wireless
EthernetActive Ethernet I/O
Peer-to-PeerI/O
Modular
Remote I/O
Media
ConvertersAccessories
11
2
1
Modular
EthernetSwitches
Rackmount
EthernetSwitches
Managed
EthernetSwitches
OrderingInform
ation
VideoNetworkingProducts
EDS-208A/205A/208/205Unmanaged Ethernet Switches
The EDS-208A/205A and EDS-208/205 are entry-level 8 and 5-port industrial Ethernet switches that support IEEE 802.3 and IEEE 802.3u/x with 10/100M full/half-duplex, MDI/MDI-X auto-sensing. The EDS-208A/205A switches provide 12/24/48 VDC (9.6 to 60VDC), 18 to 30 VAC redundant power inputs that can be connected simultaneously to live DC/AC power sources. In addition, the EDS-208A/205A switches are rated to operate at temperatures ranging from -10 to 60°C, and IP30-rated metal case is rugged enough for any harsh industrial environment. The EDS-208A/205A have DIP switches for enabling or disabling broadcast storm protection, providing another level of flexibility for different industrial applications. The
EDS-208A/205A/208/205 switches are easy to install on a DIN-or in distribution boxes. The DIN-Rail mounting capability and the IP30 case with LED indicators make these plug-and-play switches easy to use and extremely reliable.
Introduction
EDS-208A/205A/208/205 Series
10/100BaseT(X) (RJ45 connector), 100BaseFX (Multi mode, SC ›or ST connector)Supports IEEE 802.3/802.3u/802.3x ›Redundant dual 12/24/48 VDC, 18 to 30 VAC power inputs ›(EDS-208A/205A)IP30 metal case (EDS-208A/205A) ›-10 to 60°C operating temperature range ›
TechnologyStandards: IEEE 802.3 for 10BaseT,
IEEE 802.3u for 100BaseT(X) and 100BaseFX,IEEE 802.3x for Flow Control
Processing Type: Store and ForwardFlow Control: IEEE 802.3x flow control, back pressure flow control
InterfaceRJ45 Ports: 10/100BaseT(X) auto negotiation speed, Full/Half duplex mode, and auto MDI/MDI-X connectionFiber Ports: 100BaseFX ports (SC/ST connector, multi mode)LED Indicators: Power, 10/100M (TP port), and 100M (Fiber port)
Optical FiberDistance: 0 to 5 km, 1300 nm (50/125 μm, 800 MHz*km) 0 to 4 km, 1300 nm (62.5/125 μm, 500 MHz*km)Min. TX Output: -20 dBm Max. TX Output: -14 dBmRX Sensitivity: -34 to -30 dBm
Power RequirementsEDS-208A/205A series•
Input Voltage: 12/24/48 VDC (9.6 to 60 VDC), 18 to 30 VAC (47 to 63 Hz)Connection: Removable 4-contact terminal blockReverse Polarity Protection: Present
EDS-208/205 series•Input Voltage: 12 to 45 VDC, 18 to 30 VAC (47 to 63 Hz)
Specifications
Comparison Chart for EDS-200A/200 Ethernet SwitchesPower
RedundancyMetal Case DIP Switch* Power Range
EDS-200A √ √ √ 12/24/48 VDC (9.6 to 60 VDC)
EDS-200 12 to 45 VDC
*DIP switch for enabling or disabling broadcast storm protection.
Input Current (@ 24 V): 0.12A (EDS-205), 0.14A (EDS-208), 0.23A (EDS-208-M)Connection: Removable 3-contact terminal blockOverload Current Protection: 1.1AReverse Polarity Protection: Present
Physical CharacteristicsCasing: IP30 protection, metal case (EDS-208A/205A), plastic case (EDS-208/205) Dimensions (W x H x D): EDS-208A: 50 x 115 x 70 mm (1.96 x 4.52 x 2.76 in.)EDS-205A: 30 x 115 x 70 mm (1.18 x 4.52 x 2.76 in.)EDS-208: 40 x 100 x 74 mm (1.57 x 3.94 x 2.91 in.)EDS-205: 25 x 100 x 74 mm (0.98 x 3.94 x 2.91 in.)Weight: EDS-208: 170 g EDS-205: 135 gInstallation: DIN-Rail mounting
Environmental LimitsOperating Temperature: -10 to 60°C (14 to 140°F)Storage Temperature: -40 to 85°C (-40 to 185°F)Ambient Relative Humidity: 5 to 95% (non-condensing)
Regulatory ApprovalsSafety: EDS-208A: UL508 (Pending)
EDS-205A: UL508 (Pending) EDS-208: UL508, UL60950-1EDS-205: UL508
8 and 5-port entry-level unmanaged Ethernet switches
Preliminary
www.moxa.com emai l : [email protected] 3-16
Industrial Ethernet Solutions for Control and Automation
3
Unmanaged Ethernet Sw
itches
Ordering Information
Optional AccessoriesDR-4524: • 45W/2A DIN-Rail 24 VDC power supply, 85 to 264 VAC inputDR-75-24: • 75W/3.2A DIN-Rail 24 VDC power supply, 85 to 264 VAC input DR-120-24: • 120W/5A DIN-Rail 24 VDC power supply, 88 to 132 VAC/176 to 264 VAC input by switchRK-4U: • 4U-high 19” rack mounting kit
Product Model Port Interface
Case Material Power RangeStandard Temperature (-10 to 60°C)
10/100BaseT(X)
100BaseFX
Multi Mode,SC Connector
Multi Mode,ST Connector
EDS-208A/205A Series
EDS-205A 5 Metal 12/24/48 VDC (9.6 to 60 VDC)
EDS-208A 8 Metal 12/24/48 VDC (9.6 to 60 VDC)
EDS-208A-M-SC 7 1 Metal 12/24/48 VDC (9.6 to 60 VDC)
EDS-208A-M-ST 7 1 Metal 12/24/48 VDC (9.6 to 60 VDC)EDS-208/205 Series
EDS-205 5 Plastic 12 to 45 VDC
EDS-208 8 Plastic 12 to 45 VDC
EDS-208-M-SC 7 1 Plastic 12 to 45 VDC
EDS-208-M-ST 7 1 Plastic 12 to 45 VDC
Dimensions (unit = mm)
EDS-208A/205A/208/205
EMI: FCC Part 15, CISPR (EN55022) class AEMS: EN61000-4-2 (ESD)
EN61000-4-3 (RS) EN61000-4-4 (EFT) EN61000-4-5 (Surge) EN61000-4-6 (CS) EN61000-4-8 EN61000-4-11
Shock: IEC 60068-2-27
Freefall: IEC 60068-2-32Vibration: IEC 60068-2-6MTBF: EDS-208: 368,000 hrs Database: MIL-HDBK-217F, GB 25˚C EDS-205: 323,000 hrs Database: Telcordia (Bellcore), GB*Please check Moxa’s website for the most up-to-date certification status.
Warranty5 years (see www.moxa.com/warranty for details)
[ EDS-208/205 ]
Rear View
Rear View
Front View
Front View
Side View
Side View
Top & Bottom Views
Top & Bottom Views
25
[ EDS-208A/205A ]
DIN-Rail Kit
DIN-Rail Kit
Solution Tutorial 4-2
PT-7828 IEC 61850-3 24+4G-port Layer 3 Gigabit modular managed Ethernet switch 4-6
PT-7728 IEC 61850-3 24+4G-port Gigabit modular managed Ethernet switch 4-9
PT-7710 IEC 61850-3 8+2G-port Gigabit modular managed Ethernet switch 4-12
PT-7324 IEC 61850-3 22+2G-port Gigabit smart Ethernet switch 4-14
IKS-6726 24+2G-port Gigabit modular managed Ethernet switch 4-16
IKS-6324 22+2G-port Gigabit unmanaged Ethernet switch 4-19
PM-7200 Gigabit Ethernet and fast Ethernet interface modules 4-21
Rackmount Ethernet Switches
Rackmount Ethernet Switches
4
Industrial Ethernet Solutions for Control and Automation
www.moxa.com emai l : [email protected] 4-2
4
Rackmount Ethernet Sw
itches
Industrial Ethernet Solutions for Control and Automation
LED Display
Solution Tutorial
Powerful Ruggedized Rackmount SolutionSuitable for Demanding Power Utility and Transportation Applications
Gigabit Fiber Optic Cable (1000BaseSX/LX/LHX/ZX)Fiber Optic Cable (100BaseFX)Twisted Pair Cable (10/100BaseT(X) or 10/100/1000BaseT(X))Serial Cable (RS-232/422/485)
PLCs Embedded Computer
PT-7828 IEC 61850-3 Layer3 24+4G-port Managed Ethernet Switch
IKS-6726 24+2G-port Managed Ethernet Switch
IKS-6324 22+2G-port Unmanaged
Ethernet Switch
PT-7728
PT-7728IEC 61850-3 24+4G-port
Managed Ethernet Switch
Gigabit Turbo Ring
Gigabit Turbo Ring
Traffic Signals
IP Camera
IEDs
Up to 20 IEDs
Relays
HMI/SCADA HMI/SCADA Remote Dispatch Control Room
PT-7728
PT-7710 IEC 61850-3 8+2G-port Managed Ethernet Switch
PT-7324 IEC 61850-3 22+2G-port Smart Ethernet Switch
emai l : [email protected] www.moxa.com 4-3
0
4
3
OverviewRackm
ount Ethernet Sw
itches
5
6
7
8
9
10
12
Wireless
EthernetActive Ethernet I/O
Peer-to-PeerI/O
Modular
Remote I/O
Media
ConvertersAccessories
11
2
1
Modular
EthernetSwitches
Unmanaged
EthernetSwitches
Managed
EthernetSwitches
OrderingInform
ation
VideoNetworkingProducts
Substation and transportation automation networks can be extremely large and cover expansive territories. Moxa’s rackmount Ethernet switches satisfy the scalable network requirements with long-haul fiber solutions from Layer 3 to Layer 2 Ethernet switches.
The PT-7828 Layer 3 Ethernet switch can divide a large network •into hierarchical sub-nets. Controlling network traffic on its own subnet can help to improve the performance of the entire network.
The Layer 2 modular managed • Ethernet switches PT-7728, PT-7710, and IKS-6726 support advanced network management and control functions, including VLAN, QoS, IGMP snooping,
LACP, and GMRP to optimize and prioritize network communica-tion.
The Layer 2 smart • Ethernet switch PT-7324 offers web-smart functions, such as port-based VLAN and QoS, to make network management easier.
The Layer 2 unmanaged IKS-6324 series of • Ethernet switches are reliable plug-and-play Ethernet communication solutions that give users an easy and economical way to connect with end devices.
* Please check the “Comparison Chart for Rackmount Ethernet Switches” on page 4-5 for details of features that each product model supports.
Moxa’s rackmount Ethernet switches provide multiple levels of redundant features:
Media RedundancyManaged rackmount Ethernet switches come with the world’s fastest Turbo Ring redundancy (20 ms @ 250 switches), and standard STP or RSTP redundant protocol. In addition to a single ring redundancy structure, Turbo Ring also provides multiple ring-coupling functions, such as “Ring Coupling,” “Dual Homing,” and “Dual Ring.”
Power Input RedundancyNon-stop operation is the key criterion for mission-critical applications. The PT-7828/7728 and IKS-6726 support dual, isolated, redundant power supplies with different power sources (24/48 VDC or 110/220 VAC/VDC input voltage). For example, you can choose 110/200 VAC/VDC as your main power source, and 48 VDC from a battery as your back up power source.
Configuration RedundancyThe ABC-01 backup configuration tool can both save and load configurations automatically when connected to a Moxa managed Ethernet switch. This novel management tool helps reduce downtime, and can be used for fast configuration duplication of large-scale networks.
* Please check the “Comparison Chart for Rackmount Ethernet Switches” on page 4-5 for details of features that each product model supports.
Ethernet has already penetrated into the industrial environment, and is widely adopted from control rooms to controllers and devices on the shop floor. Industrial Ethernet is not only being used in a wide range of vertical markets, but is also finding uses in different facets of each market. For example, IEC 61850-3 industrial Ethernet networks are applied as the physical medium for power substation automation, which means that a host of legacy field buses must be connected to the Ethernet network. The bottom line is that Industrial Ethernet is becoming the future trend for automation communication.
Different vertical markets require different solutions, which is why Moxa developed two distinct rackmount Ethernet switch product lines. The new PowerTrans PT series IEC 61850-3 rackmount Ethernet switch series and IKS industrial rackmount Ethernet switch series were developed to meet the needs of a variety of applications (see the table at the right).
Tailor-made Rackmount Solutions Fit Diverse Requirements
Two Product Lines for Diverse Applications
Applications
Substation automation Power automation
Rail traffic Traffic control center
Road traffic Marine & offshore
Certifications Required
IEC 61850-3/IEEE 1613 NEMA TS2
NEMA TS2 DNV/GL
EN 50121-4
DNV/GL
Moxa’s Solution
PowerTrans PT series IEC 61850-3 rackmount Ethernet switches
IKS series industrial rack-mount Ethernet switch
Solution TutorialRackmount Ethernet Switches
Redundancy for Higher Network Availability
Scalable Network Infrastructure Capability
Gigabit Turbo Ring
SAVE LOAD
ABC-01 ABC-01
Redundant power supplies (88-300 VDC/85-264 VAC, and 24/48 VDC)
www.moxa.com emai l : [email protected] 4-4
4
Rackmount Ethernet Sw
itches
Industrial Ethernet Solutions for Control and Automation
IEC 61850-3IEC 61850-3 specifically addresses environmental and electromagnetic interference (EMI) immunity for communications networks and systems in substations. The EMI immunity requirements are based on IEC 61000-6-5, which establishes performance criteria for key functions within the substation. To be compliant with the standard, critical functions, such as protection relay and control functions, on-line processing and regulation, as well as metering and network communication, must experience no delays or data loss when exposed to various EMI phenomena.
IEEE 1613IEEE 1613 is another industry standard that establishes EMI immunity requirements for networking devices in electric power substations. Included in this standard are ratings, environmental performance requirements, and testing requirements for compliant communication devices.
According to the IEEE 1613 standard, compliant devices may not experience permanent damage under EMI stress. Two different classes of devices are defined in the standard according to how EMI stress affects performance.
Class 1Compliant devices in this class may experience some data errors, losses, or delays under EMI stress conditions.
Class 2Compliant devices in this class must not experience any data errors, delays, or losses under EMI stress conditions.
The PowerTrans PT series is compliant with IEC 61850-3 and IEEE 1613 certifications specifying a high level of EMC, shock, and vibration in power substations.
Solution Tutorial
Certifications to Ensure Reliable Operation
Up to 4 Gigabit Ports for Backbone and UplinkAs industry adopts bandwidth-hungry applications such as video surveillance, there is a greater need for high bandwidth and fault-tolerance solutions with Gigabit Ethernet equipment. Demand is growing for applications in industrial networks that comprise multiple, interconnected Gigabit backbones among different network centers. Moxa offers a range of Gigabit managed Ethernet solutions that can be used to form a Gigabit backbone that connects to control centers, video-over-IP servers, Ethernet-enabled devices, or other Ethernet switches. These Gigabit Ethernet switches support fault-tolerant rings with fiber-optic ports, allowing operation in the toughest industrial environments.
Gigabit Ethernet is the trend, and we can already see a lot of work stations, HMA/SCADA equipment, and video monitoring panels that come standard with a Gigabit Ethernet interface in control rooms.
Moxa’s modular rackmount Ethernet switches come with up to 4 Gigabit combo ports for the PT-7828/7728 series. Other modular Ethernet switches include the managed PT-7710 Ethernet switch, the IKS-6726 Ethernet switch, the smart PT-7324 Ethernet switch, and the unmanaged IKS-6324 Ethernet switch, all of which support 2 Gigabit combo ports. Any combination of twisted pair and fiber optical ports can be chosen to form a redundant Gigabit Turbo Ring or connected to a Gigabit HMI/SCADA in the control room.
Media Configuration FlexibilityThe PT and IKS series modular Ethernet switches support different numbers of Gigabit and fast Ethernet interface modules that allow users to choose from a variety of copper/fiber media combinations. The modular design benefits users in three ways:
Higher flexibility for system design and fast network changes•Easy maintenance and lower cost of spare parts•Reduced cost of future upgrade•
Cabling FlexibilityMoxa’s rackmount Ethernet switches provide two options of cabling direction. Front cabling is ideal for maintenance, whereas rear cabling is neater and results in an arrangement that is safer in the event once a cable gets disconnected.
Future-proof Flexibility
The rugged design of the PowerTrans PT and IKS series Ethernet switches make them well-qualified for a diverse number of mission-critical communication applications in the power utility and transportation automation markets.
19-inch rack-mountable design to meet the installation needs of •substation and traffic control rooms.To perform flawlessly in the uncontrolled climates found in utility •
substations and industrial environments, these rackmount Ethernet switches are designed for fan-less operation in a wide temperature range of -40 to 85°C.-All PT series Ethernet switches are designed for use in a -40 to 85°C wide operating temperature range.
-All IKS series Ethernet switches are designed for use in a -40 to 75°C wide operating temperature range.
Power Substation Certifications
Rugged Design Suitable for Harsh Environments
emai l : [email protected] www.moxa.com 4-5
0
4
3
OverviewRackm
ount Ethernet Sw
itches
5
6
7
8
9
10
12
Wireless
EthernetActive Ethernet I/O
Peer-to-PeerI/O
Modular
Remote I/O
Media
ConvertersAccessories
11
2
1
Modular
EthernetSwitches
Unmanaged
EthernetSwitches
Managed
EthernetSwitches
OrderingInform
ation
VideoNetworkingProducts
EN 50121-4EN 50121-4 defines the emission and immunity of signaling and telecommunication apparatus.
Model
PT-7828 28 4 24 √ √ √ √ √ √ √ √ √ √ √ √ √
PT-7728 28 4 24 √ √ √ √ √ √ √ √ √ √ √ √
PT-7710 10 2 8 √ √ √ √ √ √ √ √ √ √ √ √
PT-7324 24 2 22 √ √ √ √
IKS-6726 26 2 24 √ √ √ √ √ √ √ √ √ √ √ √
IKS-6324 24 2 22 √
Tota
l Num
ber o
f Por
tsGi
gabi
t Eth
erne
t(1
0/10
0/10
00 M
bps)
Fast
Eth
erne
t(1
0/10
0 M
bps)
IEC
6185
0-3,
IEEE
161
3
NEM
A TS
2
EN 5
0121
-4
DNV/
GL
Rout
ing
(Sta
tic, R
IP V
1/V2
)Tu
rbo
Ring
and
RST
P/ST
P
IGM
P sn
oopi
ng/G
MRP
Port
Trun
king
IEEE
802
.1X/
HTTP
S/SS
H
Port
Lock
SNM
P/RM
ON
802.
1Q V
LAN
Port-
base
d VL
AN
QoS
Isol
ated
Red
unda
nt P
ower
ABC-
01*
Comparison Chart for Rackmount Ethernet Switches
Port Interface Certification Features
*Operating temperature supported: -40 to 85˚C for PT series; -40 to 75˚C for IKS series.*ABC-01 is an RS-232 RJ45-based automatic backup configurator for Managed Ethernet Switches. Please check page 11-1 for detailed information.
Test NEMA TS2
Temperature -34 to 74˚C
Humidity 18% to 90% RH, non-condensing
Voltage 120 to 135 VAC @ 57 to 63 Hz
Vibration 0.5 g @ 5 to 30 Hz
Shock 10 G’s for 11 ms
Solution TutorialRackmount Ethernet Switches
Road Traffic Control System Standard
Railway Control System Standards
NEMA TS2 The National Electrical Manufacturers Association (NEMA) established the TS1 standard to define technically adequate and safe traffic control equipment. The TS2 standard was later introduced to address some drawbacks of the original guidelines. NEMA TS2 defines controllers, cabinets, and systems more completely than TS1, promotes better interchangeability, and allows for future expandability. Section 2 contains the environmental and testing requirements, including guidelines for temperature, humidity, voltage, vibration, and shock.
PT series and IKS series switches are compliant with the NEMA TS2 traffic control system standard.
Available Pending *Please check Moxa’s website for the most up-to-date certification status.
www.moxa.com emai l : [email protected] 4-6
4
Rackmount Ethernet Sw
itches
Industrial Ethernet Solutions for Control and Automation
TechnologyStandards: IEEE 802.3 for 10BaseT,
IEEE 802.3u for 100BaseT(X) and 100BaseFX,IEEE 802.3ab for 1000BaseT(X),IEEE 802.3z for 1000BaseSX/LX/LHX/ZX,
IEEE 802.3x for Flow Control, IEEE 802.1D for Spanning Tree Protocol, IEEE 802.1w for Rapid STP, IEEE 802.1Q for VLAN Tagging, IEEE 802.1p for Class of Service, IEEE 802.1X for Authentication, IEEE 802.3ad for Port Trunk with LACPProtocols: IGMP v1/v2 device, GMRP, GVRP, SNMPv1/v2c/v3, DHCP Server/Client, DHCP Option 82, BootP, TFTP, SNTP, SMTP, RARP, RMON, RIP V1/V2, HTTP, HTTPS, Telnet, SSH, Syslog MIB: MIB-II, Ethernet-like MIB, P-BRIDGE MIB, Q-BRIDGE MIB, Bridge MIB, RSTP MIB, RMON MIB Group 1, 2, 3, 9Flow Control: IEEE 802.3x flow control, back pressure flow control
PT-7828 Series
Features and BenefitsStatic routing, RIP V1/V2 to divide a large network into hierarchical •sub-nets and allow data and information to communicate across networksTurbo Ring and RSTP/STP (IEEE 802.1w/D)•IGMP Snooping and GMRP for filtering multicast traffic from •industrial Ethernet protocolsIEEE 802.1Q VLAN and GVRP protocol to ease network planning•QoS-IEEE802.1p/1Q and TOS/DiffServ to increase determinism •802.3ad, LACP for optimum bandwidth utilization•IEEE 802.1X, HTTPS, and SSH to enhance network security•SNMPv1/v2c/v3 for different levels of network management•
ABC-01 for system configuration backup•RMON for efficient network monitoring and proactive capability•Bandwidth management prevents unpredictable network status•Lock port for only authorized MAC address access•Port mirroring for online debugging•Automatic warning by exception through email, relay output•Automatic recovery of connected device’s IP addresses•Line-swap fast recovery•Configurable by Web browser, Telnet/Serial console, Windows •utility, and ABC-01
IntroductionThe PowerTrans PT-7828 is a high performance Layer 3 Ethernet switch that supports IP routing protocols, including static routing and RIP V1/V2, which facilitate the deployment of applications across networks. The PT-7828 is also designed to meet the strict demands of power substation automation systems (IEC 61850-3, IEEE 1613), traffic control systems (NEMA TS2), and railway applications (EN50121-4).
The PT-7828’s Gigabit and fast Ethernet backbone, redundant ring, and 24/48 VDC or 110/220 VDC/VAC dual isolated redundant power supplies increase the reliability of your communications and save on cabling/wiring costs. The modular design of the PT-7828 makes network planning easy, and allows greater flexibility by letting you install up to 4 Gigabit ports and 24 fast Ethernet ports. Optional front or rear wiring makes the PT-7828 suitable for a variety of applications.
Static routing and RIP V1/V2 supported ›IEC 61850-3, IEEE 1613 (power substations), NEMA TS2 (traffic ›control systems), and EN50121-4 (railway applications) compliantTurbo Ring and RSTP/STP for Ethernet redundancy ›Isolated redundant power inputs with universal 24/48 VDC or ›110/220 VDC/VAC power supply rangeModular design for various media options: RJ45, Fiber optic and ›SFP ports-40 to 85°C operating temperature range ›
Slot 1 Slot 2 Slot 3 Slot 4
PT-7828
Layer 3 Modular Rackmount Ethernet Switch System, PT-7828
Specifications
IEC 61850-3 24+4G-port Layer 3 Gigabit modular managed Ethernet switch
PT-7828
emai l : [email protected] www.moxa.com 4-7
0
4
3
OverviewRackm
ount Ethernet Sw
itches
5
6
7
8
9
10
12
Wireless
EthernetActive Ethernet I/O
Peer-to-PeerI/O
Modular
Remote I/O
Media
ConvertersAccessories
11
2
1
Modular
EthernetSwitches
Unmanaged
EthernetSwitches
Managed
EthernetSwitches
OrderingInform
ation
VideoNetworkingProducts
PT-7828Rackmount Ethernet Switches
Dimensions (unit = mm)
349.
3
44
440
31.8
457462.6480
325
Rear View
Top View
Front View
Side View
Switch PropertiesPriority Queues: 4Max. Number of Available VLANs: 64VLAN ID Range: VID 1 to 4094IGMP Groups: 256
Interface Fast Ethernet: Slot 1, 2, 3 for any combination of 8-, 7-, or 6-port PM-7200 fast Ethernet modules with 10/100BaseT(X) or 100BaseFX (SC/ST connector) Gigabit Ethernet: Slot 4 for 4- or 2-port PM-7200 Gigabit Ethernet combo module with 10/100/1000BaseT(X) or 1000BaseSFP slotsConsole: RS-232 (RJ45)System LED Indicators: STAT, PWR1, PWR2, FAULT, MASTER, COUPLERModule LED Indicators: LNK/ACT, FDX/HDX, RING PORT, COUPLER PORT, SPEEDAlarm Contact: One relay output with current carrying capacity of 3A@30 VDC or 3A@240 VAC
Power RequirementsInput Voltage: 24 VDC (18 to 36 V), or 48 VDC (36 to 72 V), or110/220 VDC/VAC (88 to 300 VDC and 85 to 264 VAC)Input Current: (all ports are equipped with fiber)Max. 2.58A @ 24 VDC, Max. 1.21A @ 48 VDC, Max. 0.64/0.33A @ 110/220 VDC,Max. 0.53/0.28A @ 110/220 VAC
Connection: 10-pin terminal blockOverload Current Protection: PresentReverse Polarity Protection: Present
Physical CharacteristicsCasing: IP30 protectionDimensions (W x H x D): 440 x 44 x 325 mm (17.32 x 1.73 x 12.80 in.)Weight: 5900 gInstallation: 19’’ rack mounting
Environmental LimitsOperating Temperature: -40 to 85°C (-40 to 185°F), cold start of min. 100 VAC at -40°CStorage Temperature: -40 to 85°C (-40 to 185°F)Ambient Relative Humidity: 5 to 95% (non-condensing)
Regulatory ApprovalsSafety: EN60950-1 (Pending)Power Automation: IEC 61850-3, IEEE 1613Road Traffic: NEMA TS2Rail Traffic: EN50121-4 (Pending)Maritime: DNV (Pending), GL (Pending)EMI: FCC Part 15, CISPR (EN55022) class A*Please check Moxa’s website for the most up-to-date certification status
Warranty5 years (see www.moxa.com/warranty for details)
www.moxa.com emai l : [email protected] 4-8
4
Rackmount Ethernet Sw
itches
Industrial Ethernet Solutions for Control and Automation
Ordering Information
Layer 3 Modular Rackmount Ethernet Switch System, PT-7828Layer 3 modular managed rackmount Ethernet switch system with 3 slots for fast Ethernet modules, and 1 slot for Gigabit Ethernet modules, for a total of up to 24+4G ports, -40 to 85°C
Optional AccessoriesABC-01: • Industrial RS-232, RJ45-based, automatic backup configuratorEDS-SNMP OPC Server Pro: • CD with EDS-SNMP OPC server software and manual
PT-7828 with power supply PM-7200 series(Gigabit or fast Ethernet)
Step 1: Select Ethernet switch system Step 2: Select interface modules
*The PT-7828 Ethernet switch system is delivered without interface module. Please refer to page 4-21 to choose PM-7200 interface modules.
Product Model Power Supply
Front Cabling, Front Display
Rear Cabling, Front Display
Isolated Power Supply 1 Isolated Power Supply 2
24 VDC (18 to 36 V)
48 VDC (36 to 72 V)
HV: 88 to 300 VDC and 85 to
264 VAC
24 VDC (18 to 36 V)
48 VDC (36 to 72 V)
HV: 88 to 300 VDC and 85 to
264 VAC
PT-7828-F-24 PT-7828-R-24 1
PT-7828-F-24-24 PT-7828-R-24-24 1 1
PT-7828-F-24-48 PT-7828-R-24-48 1 1
PT-7828-F-24-HV PT-7828-R-24-HV 1 1
PT-7828-F-48 PT-7828-R-48 1
PT-7828-F-48-48 PT-7828-R-48-48 1 1
PT-7828-F-48-HV PT-7828-R-48-HV 1 1
PT-7828-F-HV PT-7828-R-HV 1
PT-7828-F-HV-HV PT-7828-R-HV-HV 1 1
* The PT-7828 Layer 3 Ethernet switch systems provide 1 slot for Gigabit Ethernet interface modules and 3 slots for fast Ethernet interface modules. Please refer to page 4-21 to select the PM-7200 Gigabit Ethernet and fast Ethernet interface modules that you need for your own application.
PT-7828
emai l : [email protected] www.moxa.com 4-9
0
4
3
OverviewRackm
ount Ethernet Sw
itches
5
6
7
8
9
10
12
Wireless
EthernetActive Ethernet I/O
Peer-to-PeerI/O
Modular
Remote I/O
Media
ConvertersAccessories
11
2
1
Modular
EthernetSwitches
Unmanaged
EthernetSwitches
Managed
EthernetSwitches
OrderingInform
ation
VideoNetworkingProducts
TechnologyStandards: IEEE 802.3 for 10BaseT,
IEEE 802.3u for 100BaseT(X) and 100BaseFX,IEEE 802.3ab for 1000BaseT(X),IEEE 802.3z for 1000BaseSX/LX/LHX/ZX,
IEEE 802.3x for Flow Control, IEEE 802.1D for Spanning Tree Protocol, IEEE 802.1w for Rapid STP, IEEE 802.1Q for VLAN Tagging, IEEE 802.1p for Class of Service, IEEE 802.1X for Authentication, IEEE 802.3ad for Port Trunk with LACPProtocols: IGMP v1/v2 device, GMRP, GVRP, SNMPv1/v2c/v3, DHCP Server/Client, DHCP Option 82, BootP, TFTP, SNTP, SMTP, RARP, RMON, HTTP, HTTPS, Telnet, SSH, SyslogMIB: MIB-II, Ethernet-like MIB, P-BRIDGE MIB, Q-BRIDGE MIB, Bridge MIB, RSTP MIB, RMON MIB Group 1, 2, 3, 9Flow Control: IEEE 802.3x flow control, back pressure flow control
PT-7728Rackmount Ethernet Switches
PT-7728 Series
Features and BenefitsTurbo Ring and RSTP/STP (IEEE 802.1w/D)•IGMP Snooping and GMRP for filtering multicast traffic from •industrial Ethernet protocolsIEEE 802.1Q VLAN and GVRP protocol to ease network planning•QoS-IEEE 802.1p/1Q and TOS/DiffServ to increase determinism •802.3ad, LACP for optimum bandwidth utilization•IEEE 802.1X, HTTPS, and SSH to enhance network security•SNMPv1/v2c/v3 for different levels of network management•RMON for efficient network monitoring and proactive capability•
ABC-01 for system configuration backup•Bandwidth management prevents unpredictable network status•Lock port for only authorized MAC address access•Port mirroring for online debugging•Automatic warning by exception through email, relay output•Automatic recovery of connected device’s IP addresses•Line-swap fast recovery•Configurable by Web browser, Telnet/Serial console, Windows •utility, and ABC-01
IntroductionThe PowerTrans PT-7728 is designed to meet the demands of power substation automation systems (IEC 61850-3, IEEE 1613), traffic control systems (NEMA TS2), and railway applications (EN50121-4). The PT-7728’s Gigabit and fast Ethernet backbone, redundant ring, and 24/48 VDC or 110/220 VDC/VAC dual isolated redundant power supplies increase the reliability of your communications and save on cabling/wiring costs.
The modular design of the PT-7728 also makes network planning easy, and allows greater flexibility by letting you install up to 4 Gigabit ports and 24 fast Ethernet ports. Along with the optional front or rear wiring, these features together make the PT-7728 suitable for a variety of industrial applications.
IEC 61850-3, IEEE 1613 (power substations), NEMA TS2 (traffic ›control systems), and EN50121-4 (railway applications) compliantTurbo Ring and RSTP/STP for Ethernet Redundancy ›Isolated redundant power inputs with universal 24/48 VDC or ›110/220 VDC/VAC power supply rangeModular design lets you choose from a variety of media ›combinations-40 to 85°C operating temperature range ›
Slot 1 Slot 2 Slot 3 Slot 4
PT-7728
Modular Rackmount Ethernet Switch System, PT-7728
Specifications
IEC 61850-3 24+4G-port Gigabit modular managed Ethernet switch
www.moxa.com emai l : [email protected] 4-10
4
Rackmount Ethernet Sw
itches
Industrial Ethernet Solutions for Control and Automation
Dimensions (unit = mm)
349.
3
44
440
31.8
457462.6480
325
Side View
Front View
Rear View
Top View
Switch PropertiesPriority Queues: 4Max. Number of Available VLANs: 64VLAN ID Range: VID 1 to 4094IGMP Groups: 256
Interface Fast Ethernet: Slot 1, 2, 3 for any combination of 8-, 7-, or 6-port PM-7200 fast Ethernet modules with 10/100BaseT(X) or 100BaseFX (SC/ST connector) Gigabit Ethernet: Slot 4 for 4- or 2-port PM-7200 Gigabit Ethernet combo module with 10/100/1000BaseT(X) or 1000BaseSFP slotsConsole: RS-232 (RJ45)System LED Indicators: STAT, PWR1, PWR2, FAULT, MASTER, COUPLERModule LED Indicators: LNK/ACT, FDX/HDX, RING PORT, COUPLER PORT, SPEEDAlarm Contact: One relay output with current carrying capacity of 3A@30 VDC or 3A@240 VAC
Power Requirements Input Voltage: 24 VDC (18 to 36 V), or 48 VDC (36 to 72 V), or110/220 VDC/VAC (88 to 300 VDC and 85 to 264 VAC)Input Current: (all ports are equipped with fiber)Max. 2.58A @ 24 VDC, Max. 1.21A @ 48 VDC, Max. 0.64/0.33A @ 110/220 VDC,Max. 0.53/0.28A @ 110/220 VAC
Connection: 10-pin terminal blockOverload Current Protection: PresentReverse Polarity Protection: Present
Physical CharacteristicsCasing: IP30 protectionDimensions (W x H x D): 440 x 44 x 325 mm (17.32 x 1.73 x 12.80 in.)Weight: 5900 gInstallation: 19’’ rack mounting
Environmental LimitsOperating Temperature: -40 to 85°C (-40 to 185°F), cold start of min. 100 VAC at -40°CStorage Temperature: -40 to 85°C (-40 to 185°F)Ambient Relative Humidity: 5 to 95% (non-condensing)
Regulatory ApprovalsSafety: EN60950-1 (Pending)Power Automation: IEC 61850-3, IEEE 1613Road Traffic: NEMA TS2Rail Traffic: EN50121-4 (Pending)Maritime: DNV (Pending), GL (Pending)EMI: FCC Part 15, CISPR (EN55022) class A*Please check Moxa’s website for the most up-to-date certification status
Warranty5 years (see www.moxa.com/warranty for details)
PT-7728
emai l : [email protected] www.moxa.com 4-11
0
4
3
OverviewRackm
ount Ethernet Sw
itches
5
6
7
8
9
10
12
Wireless
EthernetActive Ethernet I/O
Peer-to-PeerI/O
Modular
Remote I/O
Media
ConvertersAccessories
11
2
1
Modular
EthernetSwitches
Unmanaged
EthernetSwitches
Managed
EthernetSwitches
OrderingInform
ation
VideoNetworkingProducts
PT-7728Rackmount Ethernet Switches
Ordering Information
Optional AccessoriesABC-01:• Industrial RS-232, RJ45-based, automatic backup configuratorEDS-SNMP OPC Server Pro:• CD with EDS-SNMP OPC server software and manual
Modular Rackmount Ethernet Switch System, PT-7728Modular managed rackmount Ethernet switch system with 3 slots for fast Ethernet modules, and 1 slot for Gigabit Ethernet modules, for a total of up to 24+4G ports, -40 to 85°C
PT-7728 with power supply PM-7200 series(Gigabit or fast Ethernet)
Step 1: Select Ethernet switch system Step 2: Select interface modules
*The PT-7728 Ethernet switch system is delivered without interface mod-ule. Please refer to page 4-21 to choose PM-7200 interface modules.
Product Model Power Supply
Front Cabling, Front Display
Rear Cabling, Front Display
Isolated Power Supply 1 Isolated Power Supply 2
24 VDC (18 to 36 V)
48 VDC (36 to 72 V)
HV: 88 to 300 VDC and 85 to
264 VAC
24 VDC (18 to 36 V)
48 VDC (36 to 72 V)
HV: 88 to 300 VDC and 85 to
264 VAC
PT-7728-F-24 PT-7728-R-24 1
PT-7728-F-24-24 PT-7728-R-24-24 1 1
PT-7728-F-24-48 PT-7728-R-24-48 1 1
PT-7728-F-24-HV PT-7728-R-24-HV 1 1
PT-7728-F-48 PT-7728-R-48 1
PT-7728-F-48-48 PT-7728-R-48-48 1 1
PT-7728-F-48-HV PT-7728-R-48-HV 1 1
PT-7728-F-HV PT-7728-R-HV 1
PT-7728-F-HV-HV PT-7728-R-HV-HV 1 1
* The PT-7728 Ethernet switch systems provide 1 slot for Gigabit Ethernet interface modules and 3 slots for fast Ethernet interface modules. Please refer to page 4-21 to select the PM-7200 Gigabit Ethernet and fast Ethernet interface modules that you need for your own application.
www.moxa.com emai l : [email protected] 4-12
4
Rackmount Ethernet Sw
itches
Industrial Ethernet Solutions for Control and Automation
IEC 61850-3 8+2G-port Gigabit modular managed Ethernet switch
IEC 61850-3, IEEE 1613 (power substations), NEMA TS2 (traffic ›control systems), and EN50121-4 (railway applications) compliantTurbo Ring and RSTP/STP for Ethernet redundancy ›Universal power supply range, 24/48 VDC or 110/220 VDC/VAC ›Modular design lets you choose from a variety of media ›combinations-40 to 85°C operating temperature range ›
PT-7710 Series
Features and BenefitsTurbo Ring and RSTP/STP (IEEE 802.1w/D)•IGMP Snooping and GMRP for filtering multicast traffic from •industrial Ethernet protocolsPort-based VLAN, IEEE 802.1Q VLAN, and GVRP protocol to ease •network planningQoS-IEEE 802.1p/1Q and TOS/DiffServ to increase determinism •802.3ad, LACP for optimum bandwidth utilization•IEEE 802.1X, HTTPS, and SSH to enhance network security•SNMPv1/v2c/v3 for different levels of network management•
RMON for efficient network monitoring and proactive capability•ABC-01 for system configuration backup•Bandwidth management prevents unpredictable network status •Lock port for only authorized MAC address access•Port mirroring for online debugging•Automatic warning by exception through email, relay output•Automatic recovery of connected device’s IP addresses•Line-swap fast recovery•Configurable by Web browser, Telnet/Serial console, Windows •utility, and ABC-01
Introduction
The PowerTrans PT-7710 is designed to meet the demands of power substation automation systems (IEC 61850-3, IEEE 1613), traffic control systems (NEMA TS2), and railway applications (EN50121-4). The PT-7710’s Gigabit and fast Ethernet backbone, redundant ring, and 24/48 VDC or 110/220 VDC/VAC dual redundant power supplies
increase the reliability of the communications and reduce cabling and wiring costs. The modular design of the PT-7710 makes network planning easy, and allows greater flexibility by letting you install up to 2 Gigabit ports and 8 fast Ethernet ports, or 10 fast Ethernet ports.
Modular Rackmount Ethernet Switch System, PT-7710
Specifications
TechnologyStandards: IEEE 802.3 for 10BaseT, IEEE 802.3u for 100BaseT(X) and 100BaseFX, IEEE 802.3ab for 1000BaseT(X), IEEE 802.3z for 1000BaseSX/LX/LHX/ZX, IEEE 802.3x for Flow Control, IEEE 802.1D for Spanning Tree Protocol, IEEE 802.1w for Rapid STP,
M1 M2 PT-7710
Slot 1 Slot 2
PT-7710 IEEE 802.1Q for VLAN Tagging, IEEE 802.1p for Class of Service, IEEE 802.1X for Authentication, IEEE 802.3ad for Port Trunk with LACPProtocols: IGMP v1/v2 device, GMRP, GVRP, SNMPv1/v2c/v3, DHCP Server/Client, DHCP Option 82, BootP, TFTP, SNTP, SMTP, RARP, RMON, HTTP, HTTPS, Telnet, SSH, SyslogMIB: MIB-II, Ethernet-like MIB, P-BRIDGE MIB, Q-BRIDGE MIB, Bridge MIB, RSTP MIB, RMON MIB Group 1, 2, 3, 9Flow Control: IEEE 802.3x flow control, back pressure flow control
Switch PropertiesPriority Queues: 4Max. Number of Available VLANs: 64VLAN ID Range: VID 1 to 4094IGMP Groups: 256
emai l : [email protected] www.moxa.com 4-13
0
4
3
OverviewRackm
ount Ethernet Sw
itches
5
6
7
8
9
10
12
Wireless
EthernetActive Ethernet I/O
Peer-to-PeerI/O
Modular
Remote I/O
Media
ConvertersAccessories
11
2
1
Modular
EthernetSwitches
Unmanaged
EthernetSwitches
Managed
EthernetSwitches
OrderingInform
ation
VideoNetworkingProducts
PT-7710Rackmount Ethernet Switches
219.
3 195
209.
4
44
44
266.7
266.7
Dimensions (unit = mm)
Side ViewFront View
Rear View
Top View
InterfaceFast Ethernet: Slot 1 for any combination of 8-, 7-, or 6-port PM-7200 fast Ethernet modules with 10/100BaseT(X) or 100BaseFX (SC/ST connector), and Slot 2 for a 2- or 1-port interface modules with 100BaseFX (SC/ST connector)Gigabit Ethernet: Slot 2 for 2-port PM-7200 Gigabit Ethernet combo module with 10/100/1000BaseT(X) or 1000BaseSFP slots Console: RS-232 (RJ45)System LED Indicators: STAT, PWR1, PWR2, FAULT, MASTER, COUPLERModule LED Indicators: LNK/ACT, FDX/HDX, RING PORT, COUPLER PORT, SPEEDAlarm Contact: One relay output with current carrying capacity of 3A@30 VDC or 3A@240 VAC
Power RequirementsInput Voltage: 24/48 VDC (9 to 60 V), or 110/220 VDC/VAC (88 to 300 VDC and 85 to 264 VAC)Input Current: (all ports are equipped with Fiber)Max. 0.81A @ 24 VDCMax. 0.42A @ 48 VDCMax. 0.17/0.10 @ 110/220 VDC,Max. 0.20/0.12 @ 110/220 VACConnection: 10-pin terminal block
Overload Current Protection: PresentReverse Polarity Protection: Present
Physical CharacteristicsCasing: IP30 protectionDimensions (W x H x D): 266.7 x 44 x 195 mm (10.5 x 1.73 x 7.68 in.)Weight: 2200 gInstallation: 19’’ rack mounting, wall mounting
Environmental LimitsOperating Temperature: -40 to 85°C (-40 to 185°F)Storage Temperature: -40 to 85°C (-40 to 185°F)Ambient Relative Humidity: 5 to 95% (non-condensing)
Regulatory ApprovalsSafety: EN60950-1 (Pending)Power Automation: IEC 61850-3, IEEE 1613Road Traffic: NEMA TS2Rail Traffic: EN50121-4 (Pending)Maritime: DNV (Pending), GL (Pending)EMI: FCC Part 15, CISPR (EN55022) class A*Please check Moxa’s website for the most up-to-date certification status
Warranty5 years (see www.moxa.com/warranty for details)
Ordering Information
Modular Rackmount Ethernet Switch System, PT-7710Modular managed rackmount Ethernet switch system with 1 slot for fast Ethernet modules, and 1 slot for fast Ethernet or Gigabit Ethernet modules, for a total of up to 10- or 8+2G- ports, -40 to 85°C
PT-7710 with power supply PM-7200 series(Gigabit or fast Ethernet)
Step 1: Select Ethernet switch system Step 2: Select interface modules
*The PT-7710 Ethernet switch system is delivered without interface module. Please refer to page 4-21 to choose PM-7200 interface modules.
Optional AccessoriesABC-01:• Industrial RS-232, RJ45-based, automatic backup configuratorEDS-SNMP OPC Server Pro:• CD with EDS-SNMP OPC server software and manual
Product Model Power SupplyRackmounting,Front Cabling,Front Display
Wall mounting,Down Cabling,Front Display
LV: 24/48 VDC (9 to 60 V) HV: 88 to 300 VDC and 85 to 264 VAC, isolated
PT-7710-F-LV PT-7710-D-LV 1
PT-7710-F-HV PT-7710-D-HV 1
* The PT-7710 Ethernet switch systems provide 1 slot for Gigabit Ethernet interface modules and 1 slot for fast Ethernet interface modules. Please refer to page 4-21 to select the PM-7200 Gigabit Ethernet and fast Ethernet interface modules that you need for your own application.
www.moxa.com emai l : [email protected] 4-14
4
Rackmount Ethernet Sw
itches
Industrial Ethernet Solutions for Control and Automation
PT-7324 Series
Features and BenefitsPort-based VLAN to ease network planning•802.1p priority queues and port-based QoS to increase determinism•
IntroductionThe PowerTrans PT-7324 smart Ethernet switch is designed to meet the demands of power substation automation systems (IEC 61850-3, IEEE 1613), traffic control systems (NEMA TS2), and railway applications (EN50121-4). The PT-7324 is also equipped with smart features, "Class of Service" features suitable for multimedia applications, and port-based
VLAN features that can be used to segment your network without being restricted by physical connections. If you do not want to receive too many broadcast packets, the broadcast storm filtering feature will discard broadcast packets if the number of such packets exceeds a threshold in a preset period of time.
IEC 61850-3, IEEE 1613 (power substations), NEMA TS2 (traffic ›control systems), and EN50121-4 (railway applications) compliantPort-based VLAN to enhance security/network performance ›802.1p priority queues, port-based QoS ›Smart web-based management makes configuration easy ›Universal power supply range, 24/48 VDC or 110/220 VDC/VAC ›-40 to 85°C operating temperature range ›
Smart Rackmount Ethernet Switch System, PT-7324
TechnologyStandards: IEEE 802.3 for 10BaseT,
IEEE 802.3u for 100BaseT(X) and 100BaseFX,IEEE 802.3ab for 1000BaseT(X),IEEE 802.3z for 1000BaseSX/LX/LHX/ZX,IEEE 802.3x for Flow Control,IEEE 802.1p for Class of Service
Flow Control: IEEE 802.3x flow control, back pressure flow control
Switch PropertiesPriority Queues: 2Max. Number of Available VLANs: 24
InterfaceRJ45 Ports: 10/100BaseT(X) or 10/100/1000BaseT(X) auto negotiation speed, F/H duplex mode and auto MDI/MDI-X connectionFiber Ports: 100BaseFX (SC/ST connector) or 1000BaseSFP slots *Slot 1 for 2-port PM-7200 Gigabit Ethernet combo module, or 2- or 1-port
PM-7200 fast Ethernet modules.
Specifications
PT-7324M1
Slot 1
LED Indicators: STAT, PWR1, PWR2, FAULT, LNK/ACT, FDX/HDX, SPEEDAlarm Contact: One relay output with current carrying capacity of 3A@30 VDC or 3A@240 VAC
Power RequirementsInput Voltage: 24/48 VDC (9 to 60 V), or HV: 88 to 300 VDC and 85 to 264 VACInput Current: Max. 0.68A @ 24 VDCMax. 0.35A @ 48 VDCMax. 0.17/0.11A @ 110/220 VDCMax. 0.33/0.23A @ 110/220 VACConnection: 10-pin terminal blockOverload Current Protection: PresentReverse Polarity Protection: Present
Physical CharacteristicsCasing: IP30 protectionDimensions (W x H x D): 440 x 44 x 254 mm (17.32 x 1.73 x 10.00 in.)Weight: 4700 gInstallation: 19’’ rack mounting
Environmental LimitsOperating Temperature: -40 to 85°C (-40 to 185°F)Storage Temperature: -40 to 85°C (-40 to 185°F)Ambient Relative Humidity: 5 to 95% (non-condensing)
Broadcast storm filtering•
IEC 61850-3 22+2G-port Gigabit smart Ethernet switch
PT-7324
Dimensions (unit = mm)
emai l : [email protected] www.moxa.com 4-15
0
4
3
OverviewRackm
ount Ethernet Sw
itches
5
6
7
8
9
10
12
Wireless
EthernetActive Ethernet I/O
Peer-to-PeerI/O
Modular
Remote I/O
Media
ConvertersAccessories
11
2
1
Modular
EthernetSwitches
Unmanaged
EthernetSwitches
Managed
EthernetSwitches
OrderingInform
ation
VideoNetworkingProducts
PT-7324Rackmount Ethernet Switches
457468.2479.9
31.8
254
274.
3
440
44
44
Side View
Front View
Rear View
Top View
Ordering Information
Smart Rackmount Ethernet Switch System, PT-7324
Smart rackmount Ethernet switch system with 22 10/100BaseT(X) ports, and 1 slot for fast Ethernet or Gigabit Ethernet modules, for a total of up to 24 or 22+2G ports, -40 to 85°C
PT-7324 with power supply PM-7200 series(Gigabit or fast Ethernet)
Step 1: Select Ethernet switch system Step 2: Select interface modules
*The PT-7324 Ethernet switch system is delivered without interface module.Please refer to page 4-21 to choose PM-7200 interface modules.
Product Model Power SupplyFront Cabling, Front Display
Rear Cabling,Front Display
LV: 24/48 VDC (9 to 60 V) HV: 88 to 300 VDC and 85 to 264 VAC, isolated
PT-7324-F-LV PT-7324-R-LV 1PT-7324-F-HV PT-7324-R-HV 1* The PT-7324 Ethernet switch systems provide 1 slot for Gigabit Ethernet or fast Ethernet interface modules. Please refer to page 4-21 to select the PM-7200
series Gigabit Ethernet and fast Ethernet interface modules that you need for your own application.
Regulatory ApprovalsSafety: EN60950-1 (Pending)Power Automation: IEC 61850-3, IEEE 1613Road Traffic: NEMA TS2Rail Traffic: EN50121-4 (Pending)Maritime: DNV (Pending), GL (Pending)EMI: FCC Part 15, CISPR (EN55022) class A*Please check Moxa’s website for the most up-to-date certification status
Warranty5 years (see www.moxa.com/warranty for details)
www.moxa.com emai l : [email protected] 4-16
4
Rackmount Ethernet Sw
itches
Industrial Ethernet Solutions for Control and Automation
TechnologyStandards: IEEE 802.3 for 10BaseT,
IEEE 802.3u for 100BaseT(X) and 100BaseFX,IEEE 802.3ab for 1000BaseT(X),IEEE 802.3z for 1000BaseSX/LX/LHX/ZX,IEEE 802.3x for Flow Control,IEEE 802.1D for Spanning Tree Protocol,IEEE 802.1w for Rapid STP,
IEEE 802.1Q for VLAN Tagging, IEEE 802.1p for Class of Service, IEEE 802.1X for Authentication, IEEE 802.3ad for Port Trunk with LACPProtocols: IGMP v1/v2 device, GMRP, GVRP, SNMPv1/v2c/v3, DHCP Server/Client, DHCP Option 82, BootP, TFTP, SNTP, SMTP, RARP, RMON, HTTP, HTTPS, Telnet, SSH, SyslogMIB: MIB-II, Ethernet-like MIB, P-BRIDGE MIB, Q-BRIDGE MIB, Bridge MIB, RSTP MIB, RMON MIB Group 1, 2, 3, 9Flow Control: IEEE 802.3x flow control, back pressure flow control
Switch PropertiesPriority Queues: 4Max. Number of Available VLANs: 64VLAN ID Range: VID 1 to 4094IGMP Groups: 256
IKS-6726 Series
Features and BenefitsTurbo Ring and RSTP/STP (IEEE 802.1w/D)•IGMP Snooping and GMRP for filtering multicast traffic from •industrial Ethernet protocolsIEEE 802.1Q VLAN and GVRP protocol to ease network planning•QoS-IEEE 802.1p/1Q and TOS/DiffServ to increase determinism •802.3ad, LACP for optimum bandwidth utilization•IEEE 802.1X, HTTPS, and SSH to enhance network security•SNMPv1/v2c/v3 for different levels of network management•RMON for efficient network monitoring and proactive capability•
ABC-01 for system configuration backup•Bandwidth management prevents unpredictable network status •with "Lock port" to restrict access to authorized MAC addressesPort mirroring for online debugging•Automatic warning by exception through email, relay output•Automatic recovery of connected device’s IP addresses•Line-swap fast recovery•Configurable by Web browser, Telnet/Serial console, Windows •utility, and ABC-01
IntroductionThe industrial rackmount Ethernet switch IKS-6726 is designed to meet the demands of industrial application networks such as traffic control systems (NEMA TS2) and maritime applications (DNV/GL). The IKS-6726’s Gigabit and fast Ethernet backbone, redundant ring, and 24/48 VDC or 110/220 VDC/VAC dual isolated redundant power
supplies increase the reliability of your communications and save on cabling/wiring costs. The modular design of the IKS-6726 also makes network planning easy, and allows greater flexibility by letting you install up to 2 Gigabit ports and 24 fast Ethernet ports.
Meets UL 60950-1, NEMA TS2, and DNV/GL certifications ›Turbo Ring and RSTP/STP for Ethernet Redundancy ›Isolated redundant power inputs with universal 24/48 VDC or ›110/220 VDC/VAC power supplyModular design lets you choose from a variety of media ›combinations-40 to 75°C operating temperature range ›
Slot 1 Slot 2 Slot 3
IKS-6726
Modular Rackmount Ethernet Switch System, IKS-6726
Specifications
24+2G-port Gigabit modular managed Ethernet switch
IKS-6726
Preliminary
emai l : [email protected] www.moxa.com 4-17
0
4
3
OverviewRackm
ount Ethernet Sw
itches
5
6
7
8
9
10
12
Wireless
EthernetActive Ethernet I/O
Peer-to-PeerI/O
Modular
Remote I/O
Media
ConvertersAccessories
11
2
1
Modular
EthernetSwitches
Unmanaged
EthernetSwitches
Managed
EthernetSwitches
OrderingInform
ation
VideoNetworkingProducts
IKS-6726Rackmount Ethernet Switches
Dimensions (unit = mm)
349.
3
44
440
31.8
457462.6480
325
Side View
Front View
Rear View
Top View
Interface Fast Ethernet: Slot 1 and 2 for any combination of 8-, 7-, or 6-port PM-7200 fast Ethernet modules with 10/100BaseT(X) or 100BaseFX (SC/ST connector) Gigabit Ethernet: Slot 3 for 2-port PM-7200 Gigabit Ethernet combo module with 10/100/1000BaseT(X) or 1000BaseSFP slotsConsole: RS-232 (RJ45)System LED Indicators: STAT, PWR1, PWR2, FAULT, MASTER, COUPLERModule LED Indicators: LNK/ACT, FDX/HDX, RING PORT, COUPLER PORT, SPEEDAlarm Contact: One relay output with current carrying capacity of 3A@30 VDC or 3A@240 VAC
Power Requirements Input Voltage: 24 VDC (18 to 36 V), or 48 VDC (36 to 72 V), or110/220 VDC/VAC (88 to 300 VDC and 85 to 264 VAC)Connection: 10-pin terminal blockOverload Current Protection: PresentReverse Polarity Protection: Present
Physical CharacteristicsCasing: IP30 protectionDimensions (W x H x D): 440 x 44 x 325 mm (17.32 x 1.73 x 12.80 in.)Installation: 19’’ rack mounting
Environmental LimitsOperating Temperature: -40 to 75°C (-40 to 167°F), cold start of min. 100 VAC at -40°CStorage Temperature: -40 to 85°C (-40 to 185°F)Ambient Relative Humidity: 5 to 95% (non-condensing)
Regulatory ApprovalsSafety: EN60950-1 (Pending)Maritime: DNV (Pending), GL (Pending)Road Traffic: NEMA TS2EMI: FCC Part 15, CISPR (EN55022) class A*Please check Moxa’s website for the most up-to-date certification status
Warranty5 years (see www.moxa.com/warranty for details)
www.moxa.com emai l : [email protected] 4-18
4
Rackmount Ethernet Sw
itches
Industrial Ethernet Solutions for Control and Automation
Ordering Information
Optional AccessoriesABC-01:• Industrial RS-232, RJ45-based, automatic backup configuratorEDS-SNMP OPC Server Pro:• CD with EDS-SNMP OPC server software and manual
Modular Rackmount Ethernet Switch System, IKS-6726Modular managed rackmount Ethernet switch system with 8 10/100BaseT(X) ports, 2 slots for fast Ethernet modules, and 1 slot for Gigabit Ethernet modules, for a total of up to 24+2G ports, -40 to 75°C
IKS-6726 with power supply PM-7200 series(Gigabit or fast Ethernet)
Step 1: Select Ethernet switch system Step 2: Select interface modules
*The IKS-6726 Ethernet switch system is delivered without interface module. Please refer to page 4-21 to choose PM-7200 interface modules.
Product Model Power Supply
Front Cabling, Front Display
Isolated Power Supply 1 Isolated Power Supply 2
24 VDC (18 to 36 V)
48 VDC (36 to 72 V)
HV: 88 to 300 VDC and 85 to
264 VAC
24 VDC (18 to 36 V)
48 VDC (36 to 72 V)
HV: 88 to 300 VDC and 85 to
264 VAC
IKS-6726-F-24 1
IKS-6726-F-24-24 1 1
IKS-6726-F-24-48 1 1
IKS-6726-F-24-HV 1 1
IKS-6726-F-48 1
IKS-6726-F-48-48 1 1
IKS-6726-F-48-HV 1 1
IKS-6726-F-HV 1
IKS-6726-F-HV-HV 1 1
* The IKS-6726 Ethernet switch systems provide 1 slot for Gigabit Ethernet interface modules and 2 slots for fast Ethernet interface modules. Please refer to page 4-21 to select the PM-7200 Gigabit Ethernet and fast Ethernet interface modules. IKS-6726
emai l : [email protected] www.moxa.com 4-19
0
4
3
OverviewRackm
ount Ethernet Sw
itches
5
6
7
8
9
10
12
Wireless
EthernetActive Ethernet I/O
Peer-to-PeerI/O
Modular
Remote I/O
Media
ConvertersAccessories
11
2
1
Modular
EthernetSwitches
Unmanaged
EthernetSwitches
Managed
EthernetSwitches
OrderingInform
ation
VideoNetworkingProducts
IKS-6726Rackmount Ethernet Switches
IKS-6324 Series
IntroductionThe industrial rackmount Ethernet switch IKS-6324 is designed to meet the demands of industrial application networks such as traffic control systems (NEMA TS2), and maritime applications (DNV/GL). The IKS-6324 is a 24-port industrial 19” rackmount Ethernet switch series that provides a rugged and economical solution for your industrial Ethernet connections. Up to two fast Ethernet fiber optic ports and combo Gigabit Ethernet TP or fiber optic ports can be
chosen to make the construction of a reliable Ethernet network easy. A universal power supply range of 24/48 VDC or 110/220 VDC/VAC give users greater flexibility in choosing power inputs. The Ethernet switches comply with UL standards and support a wide operating temperature range of -40 to 75°C. All models undergo a 100% burn-in test to ensure that they fulfill the special needs of industrial automation control applications.
Meets UL 60950-1, NEMA TS2, and DNV/ GL certifications ›Universal power supply range, 24/48 VDC or 110/220 VDC/VAC ›Redundant dual 24 VDC power inputs ›-40 to 75˚C operating temperature range ›
Unmanaged Rackmount Ethernet Switch System, IKS-6324
TechnologyStandards: IEEE 802.3 for 10BaseT,
IEEE 802.3u for 100BaseT(X) and 100BaseFX,IEEE 802.3ab for 1000BaseT(X),IEEE 802.3z for 1000BaseSX/LX/LHX/ZX,IEEE 802.3x for Flow Control,
Flow Control: IEEE 802.3x flow control, back pressure flow control
InterfaceRJ45 Ports: 10/100BaseT(X) or 10/100/1000BaseT(X) auto negotiation speed, F/H duplex mode and auto MDI/MDI-X connectionFiber Ports: 100BaseFX (SC/ST connector) or 1000BaseSFP slots *Slot 1 for 2-port PM-7200 Gigabit Ethernet combo module, or 2- or 1-port
PM-7200 fast Ethernet modules.
LED Indicators: STAT, PWR1, PWR2, FAULT, LNK/ACT, FDX/HDX, SPEEDAlarm Contact: One relay output with current carrying capacity of 3A@30 VDC or 3A@240 VAC
Power RequirementsInput Voltage: 24/48 VDC (9 to 60 V), or 110/220 VDC/VAC (88 to 300 VDC and 85 to 264 VAC)
Specifications
M1 IKS-6324
Slot 1
Connection: 10-pin terminal blockOverload Current Protection: PresentReverse Polarity Protection: Present
Physical CharacteristicsCasing: IP30 protectionDimensions (W x H x D): 440 x 44 x 254 mm (17.32 x 1.73 x 10.00 in.)Installation: 19’’ rack mounting
Environmental LimitsOperating Temperature: -40 to 75°C (-40 to 167°F)Storage Temperature: -40 to 85°C (-40 to 185°F)Ambient Relative Humidity: 5 to 95% (non-condensing)
Regulatory ApprovalsSafety: EN60950-1 (Pending)Maritime: DNV (Pending), GL (Pending)Road Traffic: NEMA TS2EMI: FCC Part 15, CISPR (EN55022) class A*Please check Moxa’s website for the most up-to-date certification status
Warranty5 years (see www.moxa.com/warranty for details)
22+2G-port Gigabit unmanaged Ethernet switch
Preliminary
Dimensions (unit = mm)
www.moxa.com emai l : [email protected] 4-20
4
Rackmount Ethernet Sw
itches
Industrial Ethernet Solutions for Control and Automation
457468.2479.9
31.8
254
274.
3
440
44
44
Side View
Front View
Rear View
Top View
Ordering Information
Unmanaged Rackmount Ethernet Switch System, IKS-6324
Unmanaged rackmount Ethernet switch system with 22 10/100BaseT(X) ports, and 1 slot for fast Ethernet or Gigabit Ethernet modules, for a total of up to 24 or 22+2G ports, -40 to 75°C
IKS-6324 with power supply PM-7200 series(Gigabit or fast Ethernet)
Step 1: Select Ethernet switch system Step 2: Select interface modules
*The IKS-6324 Ethernet switch system is delivered without interface module.Please refer to page 4-21 to choose PM-7200 interface modules.
Product Model Power SupplyFront Cabling, Front Display
LV: 24/48 VDC (9 to 60 V) HV: 88 to 300 VDC and 85 to 264 VAC, isolated
IKS-6324-F-LV 1
IKS-6324-F-HV 1
* The IKS-6324 Ethernet switch systems provide 1 slot for Gigabit Ethernet or fast Ethernet interface modules. Please refer to page 4-21 to select the PM-7200 series Gigabit Ethernet and fast Ethernet interface modules that you need for your own application.
IKS-6324
emai l : [email protected] www.moxa.com 4-21
0
4
3
OverviewRackm
ount Ethernet Sw
itches
5
6
7
8
9
10
12
Wireless
EthernetActive Ethernet I/O
Peer-to-PeerI/O
Modular
Remote I/O
Media
ConvertersAccessories
11
2
1
Modular
EthernetSwitches
Unmanaged
EthernetSwitches
Managed
EthernetSwitches
OrderingInform
ation
VideoNetworkingProducts
Gigabit Ethernet Interface Modules, PM-7200-2G/4G series
InterfaceRJ45 Ports: 10/100/1000BaseT(X) auto negotiation speed, and auto MDI/MDI-X connection
Fiber Ports: 1000BaseSFP slots* The PM-7200-2G/4G series Gigabit Ethernet combo modules support 2 or 4
SFP slots. Please refer to page 2-23 to select the SFP-1G series Gigabit Ethernet modules.
PM-7200-4GTXSFP PM-7200-2GTXSFP
4- or 2-port Gigabit Ethernet and 8-, 7-, 6-, 2-, or 1-port fast Ethernet interface modules for PT and IKS series rackmount Ethernet switches
PM-7200 Series Interface Modules
Fast Ethernet Interface Modules, PM-7200 series
InterfaceRJ45 Ports: 10/100BaseT(X) auto negotiation speed, F/H duplex mode, and auto MDI/MDI-X connection
Fiber Ports: 100BaseFX ports (SC/ST connector)
Optical Fiber
PM-7200-1LSC6TX
PM-7200-8TX
PM-7200-2MSC PM-7200-2SSC
PM-7200-4MSC2TX PM-7200-4SSC2TX
PM-7200-2MST4TX
PM-7200-6MSC PM-7200-6SSC
PM-7200-4MST2TX PM-7200-2MSC4TX PM-7200-2SSC4TX
PM-7200-2MST PM-7200-1MSC PM-7200-1SSC
PM-7200-1MST
PM-7200-6MST
Specifications
100BaseFX
Multi Mode Single Mode Single Mode, 80 km
Wavelength 1300 nm 1310 nm 1550 nmMax. TX -10 dBm 0 dBm 0 dBm
Min. TX -20 dBm -5 dBm -5 dBm
RX Sensitivity -32 dBm -34 dBm -34 dBm
Link Budget 12 dB 29 dB 29 dB
Typical Distance 5 km a
4 km b 40 km c 80 km d
Saturation -6 dBm -3 dBm -3 dBm
a. 50/125 μm, 800 MHz*km fiber optic cableb. 62.5/125 μm, 500 MHz*km fiber optic cablec. 9/125 μm, 3.5 PS/(nm*km) fiber optic cabled. 9/125 μm, 19 PS/(nm*km) fiber optic cable
PM-7200Rackmount Ethernet Switches
www.moxa.com emai l : [email protected] 4-22
4
Rackmount Ethernet Sw
itches
Industrial Ethernet Solutions for Control and Automation
Ordering Information
Rackmount Ethernet Switch System and Interface Module Compatibility Chart
Product ModelPort Interface
Combo Port, 10/100/1000BaseT(X) or 1000BaseSFP*
PM-7200-2GTXSFP 2
PM-7200-4GTXSFP 4
*The PM-7200-2G/4G series Gigabit Ethernet combo modules support 4 or 2 SFP slots. Please see page 2-23 for the product information of SFP-1G series Gigabit Ethernet SFP modules.
Fast Ethernet Modules for PT and IKS Series Rackmount Ethernet Switches, PM-7200 Series
Product Model
Port Interface
10/100BaseT(X)100BaseFX
Multi Mode, SC Connector
Multi Mode, ST Connector
Single Mode, SC Connector
Single Mode, SC Connector, 80 km
PM-7200-8TX 8
PM-7200-6MSC 6
PM-7200-6MST 6
PM-7200-6SSC 6
PM-7200-4MSC2TX 2 4
PM-7200-4MST2TX 2 4
PM-7200-4SSC2TX 2 4
PM-7200-2MSC4TX 4 2
PM-7200-2MST4TX 4 2
PM-7200-2SSC4TX 4 2
PM-7200-1LSC6TX 6 1
PM-7200-2MSC 2
PM-7200-2MST 2
PM-7200-2SSC 2
PM-7200-1MSC 1
PM-7200-1MST 1
PM-7200-1SSC 1
Interface Module
Product Model
PT-7828 √ √ √ √ √ √ √ √ √ √ √ √ √
PT-7728 √ √ √ √ √ √ √ √ √ √ √ √ √
PT-7710 √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √
PT-7324 √ √ √ √ √ √ √
IKS-6726 √ √ √ √ √ √ √ √ √ √ √ √
IKS-6324 √ √ √ √ √ √ √
PM-7
200-
4GTX
SFP
PM-7
200-
2GTX
SFP
PM-7
200-
1MSC
PM-7
200-
1MST
PM-7
200-
2MSC
PM-7
200-
2MST
PM-7
200-
1SSC
PM-7
200-
2SSC
PM-7
200-
8TX
PM-7
200-
2MSC
4TX
PM-7
200-
2MST
4TX
PM
-720
0-2S
SC4T
X
PM-7
200-
4MSC
2TX
PM-7
200-
4MST
2TX
PM-7
200-
4SSC
2TX
PM-7
200-
6MSC
PM-7
200-
6MST
PM-7
200-
6SSC
PM-7
200-
1LSC
6TX
PM-7200
Gigabit Ethernet Modules for PT and IKS Series Rackmount Ethernet Switches, PM-7200-2G/4G Series
Solution Tutorial 5-2
AWK-3121 Advanced industrial wireless AP/Bridge/Client 5-5
AWK-1200 Outdoor wireless AP/Bridge or AP Client 5-7
AWK-1100 Industrial wireless AP/Bridge/AP Client 5-9
Accessories IEEE 802.11a/b/g omni & directional antennas 5-11
Industrial Ethernet Solutions for Control and Automation
Industrial Wireless Ethernet
5Industrial Wireless Ethernet
www.moxa.com emai l : [email protected] 5-2
Industrial Ethernet Solutions for Control and Automation
5
Industrial Wireless Ethernet
Solution Tutorial
802.11a 802.11b 802.11g
Approval Date September 1999 September 1999 June 2003
Compatibility IEEE 802.11a compliant IEEE 802.11b compliant IEEE 802.11b/g compliant
Number of Channels 8 non-overlapping (4 in some countries)
3 non-overlapping 3 non-overlapping
Data Rates 54, 48, 36, 24, 18, 12, 9, 6 Mbps 54, 48, 36, 24, 18, 12, 9, 6 Mbps 54, 48, 36, 24, 18, 12, 9, 6 Mbps
Wireless Medium Orthogonal Frequency Division Multiplexing (OFDM), 5 GHz
Direct Sequence Spread Spectrum (DSSS), 2.4 GHz
Orthogonal Frequency Division Multiplexing (OFDM), 2.4 GHz
Getting un-Wired with IEEE 802.11
Are you ready for the convenience that comes from sending your Ethernet packets over the air instead of through a wire? Wireless is not for everyone, but if your application uses mobile equipment that is controlled over a TCP/IP network, or the cost of installing wire conduits at your work site is prohibitive, then consider setting up a wireless local area network (WLAN). The IEEE 802.11 standard
specifies a way to use radio frequency (RF) technology to send Ethernet packets over the air. Applications that include TCP/IP will run on 802.11-compliant WLANs the same as they do over Ethernet. By common agreement between regulatory agencies around the world (FCC, ETSI, etc.), a WLAN transmits over unlicensed spectrums, with only minor variations from country to country.
Introduction
802.11 Specifications
Typical Wireless Network Configurations
A wireless LAN is configured for either Ad-hoc mode or Infrastructure mode. In Ad-hoc mode, stations use peer-to-peer transmission to send information from station to station, without requiring an AP (Access Point) to connect to a wired network. This is the easiest and least expensive way to set up a wireless network. Alternatively,
Infrastructure mode requires using an AP. The AP can be used by itself to set up a WLAN, or can be used to connect the WLAN to a wired network. In either case, all wireless communication goes through the AP.
AP Client
Panel PC
AP Client
PLC
AP Client
PLC
AP Client
Panel PC
Mobile Device
Access Point
Ethernet
Ad-hoc Mode Infrastructure Mode
emai l : [email protected] www.moxa.com 5-3
0
5
4
OverviewW
ireless Ethernet
6
7
8
9
10
12
Active Ethernet I/O
Peer-to-PeerI/O
Modular
Remote I/O
Media
ConvertersAccessories
Ordering Inform
ation
11
3
2
1
Modular
EthernetSwitches
Unmanaged
EthernetSwitches
Rackmount
EthernetSwitches
Managed
EthernetSwitches
VideoNetworkingProducts
Benefits of Using Wireless Technology
What makes wireless networking a natural choice for many networking requirements?Flexibility: Wireless networks work anywhere, anytime.Easy Deployment: Wireless networks are ideal for those hard to wire areas.High Performance: Wireless networks have the bandwidth and safeguards needed to keep essential applications running continuously.Cost Effective: Wireless networks can be installed quickly, and help reduce the cost of cabling and maintenance.
One of the biggest concerns raised by potential users of WLAN technology is safety. Since data is transmitted by radio waves, how can users guarantee the confidentiality of their information? To provide secure transmission over wireless networks, Moxa provides WPA (Wi-Fi Protected Access) and WPA2 security specifications to overcome weaknesses in Wired Equivalent Privacy (WEP). In addition, Moxa’s
wireless products incorporate several important features to meet the stringent demands of industrial applications, including redundant power inputs, operating temperature ranges of either 0 to 60°C or -40 to 75°C (T models) and DIN-Rail mounting capability. The enhanced reliability of these products makes them a great choice for your wireless industrial applications.
Moxa’s Wireless Solutions for Industrial Markets
WPA (Wi-Fi Protected Access)
Moxa’s wireless products support the WPA/WPA2 standards proposed by the Wi-Fi Alliance (http://www.wi-fi.org). Both WPA-PSK (Pre-Shared Key) mode and full WPA mode are supported. WPA includes
TKIP (Temporal Key Integrity Protocol) and IEEE 802.1X, and replaces WEP by providing better WLAN security.
IEEE 802.1X/RADIUS
When configured for AP/Bridge mode, Moxa’s wireless products authenticate wireless users and distribute encryption keys dynamically with IEEE 802.1X Port-based Network Access Control and RADIUS
(Remote Authentication Dial-In User Service). The following authentication methods are supported: EAP-MD5, EAP-TLS, EAP-TTLS, and PEAP.
WLAN Security
Security Protocols Features Status
WEP (Wired Equivalent Privacy) Data encryption with RC4•
User-name/password authentication not provided•Standard
TKIP (Temporary Key Integration Protocol) Enhanced WEP with extended WEP IV length•
Packet Integration Check•Available
802.1X
Uses EAP (Extensible Authentication Protocol) for port-based •authentication
Supports RADIUS, Kerberos, and other authentication services•Available
WPA (Wi-Fi Protected Access)
TKIP, 802.1X, MIC (Message Integration Check)•
Supports RADIUS for authentication•
Backward upgradeable to all systems•
Available
802.11i (WPA2) WPA+AES cipher•Available in AWK-3121, AWK-1200-AP
Redundant Power Inputs
The AWK-3121/1100 provides two power inputs that can be connected simultaneously to live DC power sources. If one of the power inputs
fails, the other live source acts as a backup to provide the AWK-3121 and AWK-1100’s power needs automatically.
Solution TutorialIndustrial Wireless Ethernet
www.moxa.com emai l : [email protected] 5-4
Industrial Ethernet Solutions for Control and Automation
5
Industrial Wireless Ethernet
Typical Industrial Application of Wireless Ethernet
Video Encoder
Analog Camera
PC
Twisted Pair Cable (10/100BaseT(X))Coaxial Cable
AWK-1200-AP
AWK-1100
Mobile Device
Industrial Wireless AP/Bridge/AP Client
HMI
AWK-1200-AC
PC
AWK-3121
Managed Ethernet Switch
Outdoor Wireless AP/Bridge
Outdoor Wireless AP Client
Industrial Wireless AP/Bridge/Client
Solution Tutorial
Comparison Chart for Wireless Ethernet Products
Model
AWK-3121 √ √ √ √ √ IP30 802.11a/b/g 0 to 60˚C,-40 to 75˚C (T model)
√ √ √
AWK-1200-AP √ √ √ √ √ IP68 802.11b/g -20 to 70˚C √ √
AWK-1200-AC √ √ √ √ IP67 802.11b/g -20 to 70˚C √ √
AWK-1100 √ √ √ √ IP30 802.11b/g 0 to 60˚C √ √ √
64-b
it a
nd
128-
bit W
EP E
ncry
ptio
n
WPA
WPA
2
IEEE
802
.1X
Hid
e S
SID
IP R
atin
g
Sta
ndar
d
Oper
atin
g Te
mpe
ratu
re
Pow
er R
edun
danc
y
DIN-
Rail
Mou
ntin
g
Wal
l Mou
ntin
g
Mas
t Mou
ntin
g
Security Features
emai l : [email protected] www.moxa.com 5-5
0
5
4
OverviewW
ireless Ethernet
6
7
8
9
10
12
Active Ethernet I/O
Peer-to-PeerI/O
Modular
Remote I/O
Media
ConvertersAccessories
Ordering Inform
ation
11
3
2
1
Modular
EthernetSwitches
Unmanaged
EthernetSwitches
Rackmount
EthernetSwitches
Managed
EthernetSwitches
VideoNetworkingProducts
Industrial IEEE 802.11a/b/g wireless Access Point/Bridge/ClientAWK-3121 Series
IEEE 802.11a/b/g compliant ›Power input by redundant 24 VDC power inputs or ›Power-over-EthernetPowerful security with WPA/WPA2/802.1X/MAC address filtering ›DIN-Rail or wall mounting ability ›IP30 protected high-strength metal case ›
WLANStandards: IEEE 802.11a/b/g for Wireless LAN,IEEE 802.3u for 10/100BaseT(X),IEEE 802.3af for Power-over-Ethernet,IEEE 802.1D for Spanning Tree Protocol,IEEE 802.1w for Rapid STPModulation: 802.11b: DBPSK, DQPSK, CCK802.11g: OFDM with BPSK, QPSK, 16QAM, 64QAM802.11a: OFDM with BPSK, QPSK, 16QAM, 64QAMData Rate and Modulation: OFDM @ 54 Mbps, CCK @ 11/5.5 Mbps, DQPSK @ 2 Mbps, DBSK @ 1 Mbps Operating Channels: US: 2.412 to 2.462 GHz; 11 channels5.15 to 5.35, 5.725 to 5.825 GHz; 12 channels EU: 2.412 to 2.472 GHz; 13 channels5.15 to 5.35 GHz; 8 channels5.47 to 5.725 GHz; 11 channelsJP: 2.412 to 2.472 GHz; 13 channels, OFDM
2.412 to 2.484 GHz; 14 channels, CCK5.15 to 5.35 GHz; 8 channels (W52, W53)5.47 to 5.725 GHz; 11 channels (W56) Security: 64-bit and 128-bit WEP encryption, WPA/WPA2 (IEEE 802.1X/RADIUS and TKIP)Data Rates: 802.11b support rates: 1Mbps, 2Mbps, 5.5Mbps, 11Mbps802.11a/g support rates: 6Mbps, 9Mbps, 12Mbps,18Mbps, 24Mbps, 36Mbps, 48Mbps, 54MbpTransmit Power: 802.11b: 1 to 11 Mbps: Typ. 18 dBm (+/- 1.5 dBm)802.11g: 6 to 24 Mbps: Typ. 18 dBm (+/- 1.5 dBm); 36 to 48 Mbps: Typ. 16 dBm (+/- 1.5 dBm); 54 Mbps: Typ. 15 dBm (+/- 1.5 dBm)802.11a: 6 to 24 Mbps: Typ. 16 dBm (+/- 1.5 dBm); 36 to 48 Mbps: Typ. 14 dBm (+/- 1.5 dBm); 54 Mbps: Typ. 13dBm (+/- 1.5 dBm)RX Sensitivity:802.11b: -92 dBm @ 1 Mbps; -90 dBm @ 2 Mbps; -88 dBm @ 5.5 Mbps; -84 dBm @ 11 Mbps802.11g: -87 dBm @ 6 Mbps; -86 dBm @ 9 Mbps; -85 dBm @ 12 Mbps; -82 dBm @ 18 Mbps; -80 dBm @ 24 Mbps; -76 dBm @ 36 Mbps; -72 dBm @ 48 Mbps; -70 dBm @ 54 Mbps
Specifications
IntroductionAre your industrial applications hard to wire, or are your wiring costs out of control? Are you already using mobile equipment that connects over a TCP/IP network? If so, then what you need is the AWK-3121 Access Point/Bridge/Client. The AWK-3121 is rated to operate at temperatures ranging from 0 to 60°C for standard models and -40 to 75°C for extended temperature models, and is rugged enough for any
harsh industrial environment. Installation is easy, with either DIN-Rail mounting or distribution boxes. The DIN-Rail mounting ability, wide operating temperature range, and IP30 case with LED indicators make the AWK-3121 a convenient yet reliable solution for any industrial wireless application.
Advanced security64-bit and 128-bit WEP (Wired Equivalent Privacy)•Enable/disable SSID broadcasts•MAC-address-based access control•IEEE 802.1X/RADIUS•WPA (Wi-Fi Protected Access)/WPA2•
Useful utilities and remote configurationFirmware upgrade from TFTP or HTTP•Console/Web-based management•SNMP and UPnP supported•Configuration backup and reset•
AWK-3121Industrial Wireless Ethernet
Preliminary
www.moxa.com emai l : [email protected] 5-6
Industrial Ethernet Solutions for Control and Automation
5
Industrial Wireless Ethernet
AWK-3121
Dimensions (unit = mm)
802.11a: -87 dBm @ 6 Mbps; -86 dBm @ 9 Mbps; -85 dBm @ 12 Mbps; -82 dBm @ 18 Mbps; -80 dBm @ 24 Mbps; -76 dBm @ 36 Mbps; -72 dBm @ 48 Mbps; -70 dBm @ 54 Mbps
Interface Antenna: 2 dBi dual-band, omni-directional antennaConnector: RP-SMA (female)RJ45 Port: 10/100BaseT(X) auto negotiation speedLED Indicators: PWR1, PWR2, PoE, FAULT, STATE, CLIENT MODE, BRIDGE MODE, WLANConsole: RS-232 (RJ45)Alarm Contact: 1 relay output with current carrying capacity of 1A @ 24 VDCDigital Inputs: 2 inputs, electrically isolated from the electronics
+13 to +30V for state “1”•-30 to -3V for state “0”•Max. input current: 8 mA•
Power RequirementsInput Voltage: ±12 to 48 VDC, redundant dual DC power inputs or
48 VDC Power-over-Ethernet (IEEE 802.3af)Connection: 10-pin removable terminal blockReverse Polarity Protection: Present
Mounting Kit Rear ViewFront ViewDIN-Rail KitSide View
AWK-3121-US:• IEEE 802.11a/b/g wireless AP/Bridge/Client, US band, 0 to 60˚CAWK-3121-EU:• IEEE 802.11a/b/g wireless AP/Bridge/Client, EU band, 0 to 60˚CAWK-3121-JP:• IEEE 802.11a/b/g wireless AP/Bridge/Client, JP band, 0 to 60˚CAWK-3121-US-T:• IEEE 802.11a/b/g wireless AP/Bridge/Client, US band, -40 to 75˚CAWK-3121-EU-T:• IEEE 802.11a/b/g wireless AP/Bridge/Client, EU band, -40 to 75˚CAWK-3121-JP-T:• IEEE 802.11a/b/g wireless AP/Bridge/Client, JP band, -40 to 75˚C
Optional Accessories ABC-01:• Industrial RS-232 RJ45-based automatic backup configuratorDR-4524:• 45W/2A DIN-Rail 24 VDC power supply with universal 85 to 264 VAC inputDR-75-24:• 75W/3.2A DIN-Rail 24 VDC power supply with universal 85 to 264 VAC inputDR-120-24:• 120W/5A DIN-Rail 24 VDC power supply with 88 to 132 VAC/176 to 264 VAC input by switchWK-46:• Wall mounting kitRK-4U:• 4U-high 19” rack mounting kit
Ordering Information
Physical CharacteristicsCasing: IP30 protection, metal caseDimensions (W x H x D): 53.6 x 135 x 105 mm (2.11 x 5.31 x 4.13 in.)Installation: DIN-Rail mounting, wall mounting (optional kit)
Environmental LimitsOperating Temperature: 0 to 60°C (32 to 140°F), -40 to 75˚C (-40 to 167˚F) for T modelsStorage Temperature: -40 to 85˚C (-40 to 185˚F)Ambient Relative Humidity: 5% to 95% (non-condensing)
Regulatory ApprovalsSafety: EN60950, UL60950-1, UL508, UL2043 (Pending)Hazardous Location:UL/cUL Class I, Division 2, Groups A, B, C and D (Pending);ATEX Class I, Zone 2, Ex nC IIC (Pending)Radio: EN300 328, ARIB STD-33/66 (Japan)EMC: EN301 489-1/-17EMI: FCC Part 15*Please check Moxa’s website for the most up-to-date certification status.
Warranty5 years (see www.moxa.com/warranty for details)
emai l : [email protected] www.moxa.com 5-7
0
5
4
OverviewW
ireless Ethernet
6
7
8
9
10
12
Active Ethernet I/O
Peer-to-PeerI/O
Modular
Remote I/O
Media
ConvertersAccessories
Ordering Inform
ation
11
3
2
1
Modular
EthernetSwitches
Unmanaged
EthernetSwitches
Rackmount
EthernetSwitches
Managed
EthernetSwitches
VideoNetworkingProducts
IEEE 802.11g/b wireless Access Point/Bridge and AP Client for outdoors
AWK-1200 Series
Advanced security capability64-bit and 128-bit WEP (Wired Equivalent Privacy)•Enable/disable SSID broadcasts•MAC-address-based access control•IEEE 802.1X/RADIUS•WPA/WPA2 •
Useful utilities and remote configurationFirmware upgrade from HTTP•Web-based management •SNMP supported•Configuration backup and reset to factory default•
IP68 rated wireless Access Point/Bridge and IP67 rated ›wireless AP Client Point-to-point, point-to-multipoint wireless connectivity ›WEP/WPA/WPA2/IEEE 802.1X authenticator supported ›-20 to 70°C operating temperature range ›
WLANStandards: IEEE 802.11g/b for Wireless LAN, IEEE 802.3u for 10/100BaseT(X) Frequency Range: 2.4-2.4835 GHz, Direct Sequence Spread Spectrum (DSSS)Data Rate & Modulation: OFDM @ 54 Mbps, CCK @ 11/5.5 Mbps, DQPSK @ 2 Mbps, and DBSK @ 1 MbpsOperating Channels: USA: 1-11 (US)Europe: 1-13 (EU)Japan: 1-14 (JP) Security: For AWK-1200-AP: WEP, WPA, WPA2, IEEE 802.1X, MAC address filtering, Hide SSID, Layer 2 IsolationFor AWK-1200-AC: 64-bit and 128-bit WEP encryption, WPA
Data Rates: 1 Mpbs, 2 Mbps, 5.5 Mbps, 6 Mbps, 9 Mbps, 11 Mbps, 12 Mbps, 18 Mbps, 24 Mbps, 36 Mbps, 48 Mbps, 54 MbpsTransmit Power: Typ. 17 dBm @ 1, 2, 5.5 and 11 Mbps, 17 dBm @ 6 Mbps, 14 dBm @ 54 MbpsRX Sensitivity: 802.11b:-89 dBm @ 11 Mbps802.11g:-65 dBm @ 54 Mbps, -66 dBm @ 48 Mbps,-70 dBm @ 36 Mbps, -74 dBm @ 24 Mbps,-77 dBm @ 18 Mbps, -79 dBm @ 12 Mbps,-81 dBm @ 9 Mbps, -82 dBm @ 6 Mbps
Software FeaturesProtocols: HTTP, DHCP, TCP/IP, RADIUS, DNS, NetBIOS, AppleTalk, and IPX/SPXConfiguration: Web-based managementClient OS Support: Windows 95/98/2000/ME/NT/XP, Unix, and Macintosh
Specifications
IntroductionThe AWK-1200 Access Point/Bridge or AP Client is ideal for applications that are hard to wire, too expensive to wire, or use mobile equipment that connects to a TCP/IP network. The AWK-1200 series is rated to operate at temperatures ranging from -20 to 70°C, and its weatherproof design allows you to set up a WLAN, or extend existing wired networks to outdoor locations. In addition, the AWK-1200 series
has a detachable antenna design, which gives you the flexibility of choosing your own special-purpose antennas instead of using the standard models. You also don’t need to worry about finding a power supply in outdoor environments, since the AWK-1200’s PoE (Power- over-Ethernet) design makes it easy to deploy.
AWK-1200Industrial Wireless Ethernet
www.moxa.com emai l : [email protected] 5-8
Industrial Ethernet Solutions for Control and Automation
5
Industrial Wireless Ethernet
Dimensions (unit = mm)
AWK-1200
Interface Antenna: 5dBi External (AWK-1200-AP),
9dBi Internal (AWK-1200-AC)Connector: N-type female connector (AWK-1200-AP only)RJ45 Port: 10/100BaseT(X) auto negotiation speed
Power RequirementsInput Voltage: Active Ethernet, 48 VDCInput Current (@ 48 VDC, PoE): AWK-1200-AP: 0.38A AWK-1200-AC: 0.375A
Physical CharacteristicsCasing: IP68 (AWK-1200-AP), IP67 (AWK-1200-AC)Dimensions (W x H x D): AWK-1200-AP: 284.4 x 254.3 x 77.5 mm (11.20 x 10.01 x 3.05 in.)AWK-1200-AC: 165.8 x 195.8 x 60.3 mm (6.53 x 7.71 x 2.37 in.) Weight:AWK-1200-AP: 3100 gAWK-1200-AC: 600 g
AWK-1200-AP-US:• IEEE 802.11g/b IP68 wireless AP/Bridge, US band, -20 to 70°CAWK-1200-AP-EU:• IEEE 802.11g/b IP68 wireless AP/Bridge, Euro band, -20 to 70°CAWK-1200-AP-JP:• IEEE 802.11g/b IP68 wireless AP/Bridge, Japan band, -20 to 70°CAWK-1200-AC-US:• IEEE 802.11g/b IP67 wireless AP Client, US band, -20 to 70°CAWK-1200-AC-EU:• IEEE 802.11g/b IP67 wireless AP Client, Euro band, -20 to 70°CAWK-1200-AC-JP:• IEEE 802.11g/b IP67 wireless AP Client, Japan band, -20 to 70°C
Ordering Information
Mounting Kit Rear ViewFront View Side View
[ AWK-1200-AC ]
55.5
141.
5
132
120
120132
123.4
141.5
120
132
165.8
195.
8
207.
6
60.3
284.4 77.5
254.
3
437.
6
155
192.
8
6
17
154
154
37
37
297
272
15
182
68.5155.5
45
Mounting Kit Rear ViewFront View Side View
[ AWK-1200-AP ]
Installation: Wall mounting, mast mounting
Environmental LimitsOperating Temperature: -20 to 70°C (-4 to 158°F)Storage Temperature: -40 to 80°C (-40 to 176°F)Ambient Relative Humidity: 5 to 95% (non-condensing)
Regulatory ApprovalsSafety: EN60950-1: 2001, UL60950-1Radio: EN300 328EMC: EN301 489-1/-17EMI: FCC Part 15CMTBF: over 200,000 hrs Database: GB, GC (Ground Benign, Controlled) 25˚C
Warranty5 years (see www.moxa.com/warranty for details)
emai l : [email protected] www.moxa.com 5-9
0
5
4
OverviewW
ireless Ethernet
6
7
8
9
10
12
Active Ethernet I/O
Peer-to-PeerI/O
Modular
Remote I/O
Media
ConvertersAccessories
Ordering Inform
ation
11
3
2
1
Modular
EthernetSwitches
Unmanaged
EthernetSwitches
Rackmount
EthernetSwitches
Managed
EthernetSwitches
VideoNetworkingProducts
Industrial IEEE 802.11g/b wireless Access Point/Bridge/AP Client
AWK-1100 Series
IEEE 802.11g/b compliant ›Power input by redundant 24 VDC power inputs or ›Power-over-EthernetPowerful security with WPA/802.1X/MAC address filtering ›DIN-Rail or panel mounting ability ›IP30 protected high-strength metal case ›
WLANStandards: IEEE 802.11g/b for Wireless LAN, IEEE 802.3u 10/100BaseT(X) for Ethernet LAN, IEEE 802.3af for Power-over-Ethernet
Frequency Range: 2.4-2.4835 GHz, Direct Sequence Spread Spectrum (DSSS)
Data Rate & Modulation: OFDM @ 54 Mbps, CCK @ 11/5.5 Mbps, DQPSK @ 2 Mbps, and DBSK @ 1 Mbps
Operating Channels: USA: 1-11 (US) Europe: 1-13 (EU) Japan: 1-14 (JP)
Security: 64-bit and 128-bit WEP encryption, WPA (IEEE 802.1X/RADIUS and TKIP)
Data Rates: 1 Mpbs, 2 Mbps, 5.5 Mbps, 6 Mbps, 9 Mbps, 11 Mbps, 12 Mbps, 18 Mbps, 24 Mbps, 36 Mbps, 48 Mbps, 54 Mbps
Transmit Power: Typ. +18 dBm (+/- 1.5 dBm) @ 11Mbps, +14 dBm (+/- 1.5 dBm) @ 54Mbps
RX Sensitivity:802.11b: -81 dBm @ 11 Mbps, -85 dBm @ 5.5 Mbps, -86 dBm @ 2 Mbps, -87 dBm @ 1 Mbps802.11g: -68 dBm @ 54 Mbps, -70 dBm @ 48 Mbps, -74 dBm @ 36 Mbps, -78 dBm @ 24 Mbps, -81 dBm @ 18 Mbps, -84 dBm @ 12 Mbps, -85 dBm @ 9 Mbps, -86 dBm @ 6 Mbps
Specifications
IntroductionAre your industrial applications hard to wire, or are your wiring costs out of control? Are you already using mobile equipment that connects over a TCP/IP network? If so, then the AWK-1100 Access Point/Bridge/AP Client could be what you’re looking for. The AWK-1100 is rated to operate at temperatures ranging from 0 to 60°C, and is rugged enough for any harsh industrial environment. Installation is easy with
either DIN-Rail mounting or distribution boxes. The DIN-Rail mounting ability, wide operating temperature range, and IP30 case with LED indicators make AWK-1100 a convenient yet reliable solution for any industrial wireless application.
Advanced security capability64-bit and 128-bit WEP (Wired Equivalent Privacy)•Enable/disable SSID broadcasts•MAC-address-based access control•IEEE 802.1X/RADIUS•WPA (Wi-Fi Protected Access)•
Useful utilities and remote configurationFirmware upgrade from TFTP or HTTP•Web-based management •SNMP and UPnP supported•Configuration backup and reset•
AWK-1100Industrial Wireless Ethernet
www.moxa.com emai l : [email protected] 5-10
Industrial Ethernet Solutions for Control and Automation
5
Industrial Wireless Ethernet
Dimensions (unit = mm)
AWK-1100
Software FeaturesProtocols: HTTP, DHCP, TCP/IP, RADIUSConfiguration: Web-based managementClient OS Support: Windows 95/98/2000/ME/NT/XP, Unix, and Macintosh
Interface Antenna: 2 dBi omni-directional antenna Connector: RP-SMA connectorRJ45 Port: 10/100BaseT(X) auto negotiation speed
LED Indicators: PWR1, PWR2, WLAN, LAN (Link/ACT)
Power RequirementsInput Voltage: 12 to 45 VDC, redundant dual DC power inputs or
48 VDC Power-over-Ethernet (IEEE 802.3af)Input Current (@ 24 V): 0.3 AOverload Current Protection: 1.6 AConnection: Removable terminal blockReverse Polarity Protection: Present
Physical CharacteristicsCasing: IP30 protection, metal case
Dimensions (W x H x D): 53.6 x 135 x 105 mm (2.11 x 5.31 x 4.13 in.)
Weight: 800 g
Installation: DIN-Rail mounting, wall mounting (optional kit)
Environmental LimitsOperating Temperature: 0 to 60°C (32 to 140°F)Storage Temperature: -20 to 70°C (-4 to 158°F)Ambient Relative Humidity: 5% to 95% (non-condensing)
Regulatory ApprovalsSafety: EN60950-1, UL60950-1Hazardous Location: UL/cUL Class I, Division 2, Groups A, B, C, and D (Pending);ATEX Class I, Zone 2, Ex nC IIC (Pending)
Radio: EN300 328
EMC: EN301 489-1/-17
EMI: FCC Part 15C
MTBF: 200,000 hrs Database: MIL-HDBK-217F, GB 25˚C*Please check Moxa’s website for the most up-to-date certification status.
Warranty5 years (see www.moxa.com/warranty for details)
Mounting Kit Rear ViewFront ViewDIN-Rail KitSide View
AWK-1100-US:• IEEE 802.11g/b wireless AP/Bridge/AP Client, US band, 0 to 60°CAWK-1100-EU:• IEEE 802.11g/b wireless AP/Bridge/AP Client, Euro band, 0 to 60°CAWK-1100-JP: • IEEE 802.11g/b wireless AP/Bridge/AP Client, Japan band, 0 to 60°C
Optional Accessories DR-4524:• 45W/2A DIN-Rail 24 VDC power supply with universal 85 to 264 VAC inputDR-75-24:• 75W/3.2A DIN-Rail 24 VDC power supply with universal 85 to 264 VAC inputDR-120-24:• 120W/5A DIN-Rail 24 VDC power supply with 88 to 132 VAC/176 to 264 VAC input by switchWK-46:• Wall mounting kitRK-4U: • 4U-high 19” rack mounting kit
Ordering Information
emai l : [email protected] www.moxa.com 5-11
0
5
4
OverviewW
ireless Ethernet
6
7
8
9
10
12
Active Ethernet I/O
Peer-to-PeerI/O
Modular
Remote I/O
Media
ConvertersAccessories
Ordering Inform
ation
11
3
2
1
Modular
EthernetSwitches
Unmanaged
EthernetSwitches
Rackmount
EthernetSwitches
Managed
EthernetSwitches
VideoNetworkingProducts
IEEE 802.11b/g 2.4 GHz Antennas
Antennas and Accessories
Frequency Range: 2.4-2.5 GHz
Antenna Type: Omni-directional
Antenna Gain: 9 dBi
Impedance: 50 ohms
Polarization: Vertical
Radiation Angle: 360° horizontal, 12° vertical
SWR (Standing Wave Ratio): ≤ 1.5:1
Connector: N-Female
Dimensions (H): 390 mm (15.35 in.)
Weight: 370 g
Installation: U-bolt installation kit
Frequency Range: 2.4-2.5 GHz
Antenna Type: Directional, Flat Panel
Antenna Gain: 12 dBi
Impedance: 50 ohms
Polarization: Vertical
Radiation Angle: 50° horizontal, 30° vertical
SWR (Standing Wave Ratio): ≤ 1.5:1
Connector: N-Female
Dimensions (W x H x D): 90 x 275 x 30 mm (3.54 x 10.83 x 1.18 in.)
Weight: 500 g
Installation: Wall mounting, swivel mounting kit (optional kit)
AntennasIndustrial Wireless Ethernet
Frequency Range: 2.4-2.5 GHz
Antenna Type: 1/4 Dipole Sleeve
Antenna Gain: 2 dBi (typical)
Impedance: 50 ohms nominal
Polarization: Linear
Frequency Range: 2.4-2.5 GHz
Antenna Type: 1/4λ Dipole Sleeve
Antenna Gain: 5 dBi (typical)
Impedance: 50 ohms nominal
Polarization: Vertical
Type of Radiation: Toroidal
V.S.W.R: < 2
Connector: RP-SMA (male)
Antenna Profile: 108 mm length
Cable Length: 150 mm
V.S.W.R: < 2
Connector: RP-SMA (male)
IEEE 802.11a/b/g 2.4 & 5 GHz Dual-band Antenna
Frequency Range: 2.4-2.5 GHz & 4.9-5.8 GHz
Antenna Peak Gain: 2 dBi (typical)
Antenna Average Gain: 1 dBi (typical)
Impedance: 50 ohms
HPBW/Horizontal: 360°
HPBW/Vertical: 80°
Polarization: Linear, Vertical
V.S.W.R: < 2
Power Handling: 2W (cw)
Connector: RP-SMA (male)
ANT-WDB-O-2
ANT-WSB-O-02
ANT-WSB-O-5-150
ANT-1-O-09
ANT-1-D-12
www.moxa.com emai l : [email protected] 5-12
Industrial Ethernet Solutions for Control and Automation
5
Industrial Wireless Ethernet
Ordering Information ANT-WDB-O-2: • IEEE 802.11a/b/g 2.4 & 5 GHz dual-band antenna, RP-SMA (female) connectorANT-WSB-O-02: • IEEE 802.11b/g 2.4 GHz, omni-directional antenna, RP-SMA (female) connectorANT-WSB-O-5-150:• IEEE 802.11b/g 2.4 GHz, omni-directional antenna, RP-SMA (female) connector, with 150mm cableANT-1-O-09:• 2.4 GHz, omni-directional, 9 dBi antenna, N-Female connectorANT-1-D-12:• 2.4 GHz, directional, 12 dBi antenna, N-Female connectorCRF-N0117SA-3M: • CFD200 cable, N-Male to RP SMA Male connector, 3 meters (for AWK-3121 and AWK-1100 only)
*This cable is necessary for the devices, which have RP-SMA connector, to connect with optional antenna.
CRF-N0429N-3M:• CFD400 cable, N-Male to N-Male connector, 3 meters (for AWK-1200-AP only)*This cable is necessary for AWK-1200-AP to connect with optional antenna.
Optional AccessoriesHA-1002SU:• Swivel mounting kit, swivel angle 90° horizontal, 40° vertical
*Supports ANT-1-D-12 by adjusting the angle for use with different wireless applications.
Antennas
Active Ethernet I/O Tutorial 6-2
ioLogik E2210 Active Ethernet I/O with 12 DI, 8 DO 6-8
ioLogik E2212 Active Ethernet I/O with 8 DI, 8 DO, 4 DIO 6-9
ioLogik E2214 Active Ethernet I/O with 6 DI, 6 relay outputs 6-10
ioLogik E2240 Active Ethernet I/O with 8 AI, 2 AO 6-11
ioLogik E2242 Active Ethernet I/O with 4 AI, 12 configurable DIO 6-12
ioLogik E2260 Active Ethernet I/O with 6 RTD inputs, 4 DO 6-13
ioLogik E2262 Active Ethernet I/O with 8 TC inputs, 4 DO 6-14
Serial Remote I/O Tutorial 6-15
ioLogik R2110 RS-485 I/O with 12 DI, 8 DO 6-16
ioLogik R2140 RS-485 I/O with 8 AI, 2 AO 6-17
Accessories Snap-on LCD module 6-18
Active Ethernet I/O
6Active Ethernet I/O
Industrial Ethernet Solutions for Control and Automation
www.moxa.com emai l : [email protected] 6-2
Industrial Ethernet Solutions for Control and Automation
6
Active Ethernet I/O
Efficient and Intelligent Ethernet I/O
Solution Tutorial
SNMP Software Custom SoftwareMXIO Library
SCADA
ioLogik 4000Modular Remote I/O
Gigabit Ethernet Switch
Gigabit Fiber Optic Cable (1000BaseSX/LX/LHX/ZX)Fiber Optic Cable (100BaseFX)Twisted Pair Cable (10/100BaseT(X) or 10/100/1000BaseT(X))RS-485 Serial Cable
IP Camera
Video Encoder
ioLogik E2210/E2212/E2214Active Ethernet I/Ow/ DI, DO, & Relay
ioLogik E2240/2242Active Ethernet I/Ow/ AI & AO
ioLogik E2260/2262 Active Ethernet I/Ow/ Temperature Input & DO
ioMirror E3210 Ethernet Peer-to-Peer I/O w/ DI & DO
ioLogik R2110/2140Serial I/O w/ DI & DO, AI & AO
ioMirrorEthernet Peer-to-Peer I/O
Gigabit Turbo Ring
Serial Device Server
Real-time Remote Monitoring and Alarm
emai l : [email protected] www.moxa.com 6-3
5
Wireless
Ethernet0
Overview
7
8
9
10
12
Peer-to-PeerI/O
Modular
Remote I/O
Media
ConvertersAccessories
11
4
3
2
1
6
Active Ethernet I/OM
odularEthernetSwitches
Managed
EthernetSwitches
Unmanaged
EthernetSwitches
Rackmount
EthernetSwitches
VideoNetworkingProducts
OrderingInform
ation
Active Message for Event Report
Click&Go for Local I/O Control MXIO Library for Easier Programming
E2000 Active Ethernet I/ONew Generation I/O that Talks over Ethernet
The Active Ethernet I/O is a new concept that introduces proactive, condition-based reporting and control of I/O devices to PC-based data acquisition and control. I/O status of an Active Ethernet I/O can be automatically reported and controlled locally based on user specified conditions. This report-by-exception approach, new to PC-based I/O monitoring, requires far less bandwidth than traditional polling
methods. Critical sensor data can be obtained immediately instead being confined by the use of to polling intervals. This makes network communication between the host computer and Active Ethernet I/O concise and efficient, and makes data transmission 20 times faster compared with traditional SCADA systems (50 ms compared to 1 sec).
Local logic control with no learning •curve, no third-party programming, and no maintenance feesDramatic reduction in project •implementation time
Why Choose Active Ethernet I/O?
Bandwidth saving with no polling efforts•Off-line local control without Host•Easy TCP/UDP and SNMP Trap with I/O status•Real-time event time stamp•
Built-in Web Console for Configuration and MonitoringConfiguring the network •parametersSetup the I/O Mode•Monitoring the I/O status •and value
No Modbus addressing required•VB and VC for Windows support•Various options for Windows, •WinCE, and Linux platforms
Active Ethernet I/O Solution Tutorial
www.moxa.com emai l : [email protected] 6-4
Industrial Ethernet Solutions for Control and Automation
6
Active Ethernet I/O
Best Companion with PC and Embedded Computer
Unique LCD Module for PC-free Management
Intuitive Windows Utility
Online Documentation
Remote Monitoring over TCP/IP Network
The Most User-friendly I/O for Remote Monitoring and Alarm Application
In addition to providing easy-to-use utilities, the ioLogik remote I/O also comes with an online wiring guide to help you troubleshoot problems easily without needing to refer to the manual. The online guide lists key features of I/O points, and displays a conversion table for analog input/output points.
The ioLogik Ethernet remote I/O allows you to remotely monitor all I/O status over TCP/IP network. Time and traveling cost is therefore
preserved via remote monitoring functionality.
The ioLogik 2000 series stand-alone remote I/O provides an optional LCD module for on-site management and configuration. The unique display module can display network and I/O settings. You may change network settings to ensure the speed of installation and future maintenance.
The ioLogik series is designed for PC environment which Windows utility and MXIO library for both Windows and Linux systems
are provided, MXIO library are especially designed for PC-based automation.
The ioLogik remote I/O comes with a very user-friendly Windows utility that includes remote configuration, firmware updates, and I/O testing and monitoring functions. These functions can save you many hours of installation and troubleshooting, and all settings can be saved to a file for future reference.Solution Tutorial
emai l : [email protected] www.moxa.com 6-5
5
Wireless
Ethernet0
Overview
7
8
9
10
12
Peer-to-PeerI/O
Modular
Remote I/O
Media
ConvertersAccessories
11
4
3
2
1
6
Active Ethernet I/OM
odularEthernetSwitches
Managed
EthernetSwitches
Unmanaged
EthernetSwitches
Rackmount
EthernetSwitches
VideoNetworkingProducts
OrderingInform
ation
Most Applications Using Active Ethernet I/O
The Active Ethernet I/O is an ideal solution for applications in remote monitoring, data collection, asset/environment control and notification:
Server rooms for temperature and humidity control, back-up •power supply initiation, and moreBuildings, shopping-centers, and airports for temperature and •humidity controlRoadside cabinets for telecommunication/power industries•Air-conditioning and heating unit supervision•Tank level monitoring and pump control•
Door and window sensors in airports and museums•Warehouse temperature and humidity control•Medical storage•Food and chemical industry•Shopping mall visitor tracking•
There are many ways that Active Ethernet I/O can be used to enhance your existing applications, improve your system’s cost effectiveness, or help you develop new and more powerful applications.Local intelligence
No programming
Supports SNMP read/write/trapSupports I/O control using SNMP management software
Event Mailer (SMTP protocol)
Send temperature information using SMTPUser-defined mail content
Library for: Windows, Linux, WinCE 5.0
Visual Basic, Visual C++, Borland C++, Microsoft.NET
Instant Event Reporting by Input Status
Improves data acquisition and control system efficiencyMore accurate and timely measurements to prevent data loss
On/Off light
If DI_0=On, Then DO_0=On
Mail to: [email protected]: temperature=26°C
Counter = 1
Thermometer
HP Openview/What's Up Software People Counter
26°C
Liquid Heating System with ioLogik E2260
Motor
Low limit
High limit
Ethernet / TCP / IP
Watertank
HighLow
Transmit "Active Message" based on difference of two valuesLocal control of stirring machine through DO channel
Transmit "Active Message" based on averageLocal control of heater through DO channel DO-Stir Machine
RTD1 39˚CRTD2 42˚CRTD3 45˚C
DO Heater
Local Alarm & I/O Control
SNMP to I/O (SNMP protocol)
Average
Deviation
RTD3-RTD1 = 6
(RTD1+RTD2+RTD3)/3 = 42
Instead of relying on host computers that continually poll I/O devices for data, the Active Ethernet I/O can proactively report sensor status using TCP or UDP messages. Proactive messaging allows much faster notification of I/O events and generates much lower network and CPU loads. Message content is fully customizable, and up to 10 simultaneous destinations are supported.
The Active Ethernet I/O can be configured for SNMP management of I/O control and reporting. Customized SNMP traps can be triggered by I/O events such as a light switch turning on. SNMP software can be used for sophisticated automation, monitoring, and control of sensors and switches over Ethernet.
Local intelligenceNo programming
Supports SNMP read/write/trapSupports I/O control using SNMP management software
Event Mailer (SMTP protocol)
Send temperature information using SMTPUser-defined mail content
Library for: Windows, Linux, WinCE 5.0
Visual Basic, Visual C++, Borland C++, Microsoft.NET
Instant Event Reporting by Input Status
Improves data acquisition and control system efficiencyMore accurate and timely measurements to prevent data loss
On/Off light
If DI_0=On, Then DO_0=On
Mail to: [email protected]: temperature=26°C
Counter = 1
Thermometer
HP Openview/What's Up Software People Counter
26°C
Liquid Heating System with ioLogik E2260
Motor
Low limit
High limit
Ethernet / TCP / IP
Watertank
HighLow
Transmit "Active Message" based on difference of two valuesLocal control of stirring machine through DO channel
Transmit "Active Message" based on averageLocal control of heater through DO channel DO-Stir Machine
RTD1 39˚CRTD2 42˚CRTD3 45˚C
DO Heater
Local Alarm & I/O Control
SNMP to I/O (SNMP protocol)
Average
Deviation
RTD3-RTD1 = 6
(RTD1+RTD2+RTD3)/3 = 42
The Active Ethernet I/O can be used for simple output control that is triggered by input status, without a PC controller. For example, a door sensor can be configured to trigger an alarm. Configuration is done through simple If/Then statements, and no programming is required.
Local intelligenceNo programming
Supports SNMP read/write/trapSupports I/O control using SNMP management software
Event Mailer (SMTP protocol)
Send temperature information using SMTPUser-defined mail content
Library for: Windows, Linux, WinCE 5.0
Visual Basic, Visual C++, Borland C++, Microsoft.NET
Instant Event Reporting by Input Status
Improves data acquisition and control system efficiencyMore accurate and timely measurements to prevent data loss
On/Off light
If DI_0=On, Then DO_0=On
Mail to: [email protected]: temperature=26°C
Counter = 1
Thermometer
HP Openview/What's Up Software People Counter
26°C
Liquid Heating System with ioLogik E2260
Motor
Low limit
High limit
Ethernet / TCP / IP
Watertank
HighLow
Transmit "Active Message" based on difference of two valuesLocal control of stirring machine through DO channel
Transmit "Active Message" based on averageLocal control of heater through DO channel DO-Stir Machine
RTD1 39˚CRTD2 42˚CRTD3 45˚C
DO Heater
Local Alarm & I/O Control
SNMP to I/O (SNMP protocol)
Average
Deviation
RTD3-RTD1 = 6
(RTD1+RTD2+RTD3)/3 = 42
Local intelligenceNo programming
Supports SNMP read/write/trapSupports I/O control using SNMP management software
Event Mailer (SMTP protocol)
Send temperature information using SMTPUser-defined mail content
Library for: Windows, Linux, WinCE 5.0
Visual Basic, Visual C++, Borland C++, Microsoft.NET
Instant Event Reporting by Input Status
Improves data acquisition and control system efficiencyMore accurate and timely measurements to prevent data loss
On/Off light
If DI_0=On, Then DO_0=On
Mail to: [email protected]: temperature=26°C
Counter = 1
Thermometer
HP Openview/What's Up Software People Counter
26°C
Liquid Heating System with ioLogik E2260
Motor
Low limit
High limit
Ethernet / TCP / IP
Watertank
HighLow
Transmit "Active Message" based on difference of two valuesLocal control of stirring machine through DO channel
Transmit "Active Message" based on averageLocal control of heater through DO channel DO-Stir Machine
RTD1 39˚CRTD2 42˚CRTD3 45˚C
DO Heater
Local Alarm & I/O Control
SNMP to I/O (SNMP protocol)
Average
Deviation
RTD3-RTD1 = 6
(RTD1+RTD2+RTD3)/3 = 42
The ioLogik Temperature I/O brings intelligence to temperature sensors. It’s equipped virtual channels which are available to calculate the average value of each channel and the difference between two substantial channels. And it doesn’t need any controller or PC.
Active Ethernet I/O Solution Tutorial
www.moxa.com emai l : [email protected] 6-6
Industrial Ethernet Solutions for Control and Automation
6
Active Ethernet I/O
Wiring Examples for Active Ethernet I/O
Digital Input
Digital Input (Dry Contact) DI Wet Contact - Source Type DI Wet Contact - Sink Type
DI5
DI4
DI3
DI2
DI1
DI0
DI.C
OM
GN
D
+ -Brown
24 VNPN Output
0 VBlackBlue
DI.C
OM
1
DI0
DI1
DI2
GN
D
N.C
.
DI.C
OM
2
DI3
DI4
DI5
GN
D
N.C
.
+ -Brown
24 VPNP Output
0 VBlackBlue
DI.C
OM
1
DI0
DI1
DI2
GN
D
N.C
.
DI.C
OM
2
DI3
DI4
DI5
GN
D
N.C
.
Applied I/O Models:
E2210, E2212, E2214, R2110
Applied I/O Models:
E2210, E2212, E2214, R2110
Applied I/O Models:
E2212, E2214
Digital Output
Digital Output Relay Output
DO
.PW
R
DO
0
DO
1
DO
2
DO
3
DO
4
DO
5
DO
6
DO
7
DO
.GN
D
-+
Loads
AC/DC Power Source
R0_NO
GN
D
R0 N
O
R3 N
O
R2 C
R2 N
O
R4 C
R4 N
O
R3 C
R5 C
R5 N
O
R1 C
R1 N
O
R0 C
Applied I/O Models:E2210, E2212, E2214, E2242, E2260, E2262, R2110
Applied I/O Models:E2214
Analog Input / Output
Analog Input Analog Output
Vin
0+
Vin
0-
Vin
1+
Vin
1-
Vin
2+
Vin
3+
Vin
3-
Vin
2-
Vin
3+
Vin
3-
Vou
t0+
Vou
t0-
lou
t0+
Vou
t1+
lou
t1+
lou
t0-
Vou
t1-
lou
t1-
Applied I/O Models:E2240, E2242, R2140
Applied I/O Models:E2240, R2140
Temperature Input
RTD Input (2-Wire RTD) RTD Input (3-Wire RTD) Thermocouple Input
1
TC
611 66
EX IN
4
IN EX
4
EX
1 3 5
EX
1
TC
11
EX IN IN EX
5
EX
5
EX
RTD RTD RTD RTD RTD RTD RTD RTD RTD RTD RTD RTD
4 5 54 5 54 4
EX0
IN0+
IN0-
EX1
IN1+
IN1-
EX2
IN2+
IN2-
EX3
IN3+
IN3-
EX0
IN0+
IN0-
EX1
IN1+
IN1-
EX2
IN2+
IN2-
EX3
IN3+
IN3-1
TC
611 66
EX IN
4
IN EX
4
EX
1 3 5
EX
1
TC
11
EX IN IN EX
5
EX
5
EX
RTD RTD RTD RTD RTD RTD RTD RTD RTD RTD RTD RTD
4 5 54 5 54 4
EX0
IN0+
IN0-
EX1
IN1+
IN1-
EX2
IN2+
IN2-
EX3
IN3+
IN3-
EX0
IN0+
IN0-
EX1
IN1+
IN1-
EX2
IN2+
IN2-
EX3
IN3+
IN3-
TC
0+
0- 1
+1
-2
+ 2-
TC
3+
3- 4
+4
-5
+ 5-
6+
6- 7
+7
-0
+
00
-0
- 1+
1+
1-
1-
2+
2+ 2
-2
-3
+3
+3
-3
- 4+
4+
4--
5+
5+ 5
--6
+6
+6
-6
- 7+
7+
7-
7-
TCTC TCTC TCTC TCTC TCTC TCTC TCTC TCTC
TC TC TC TC TC TC TC TC
4- 5- 6- 7-+4 +5 +6 +7
EX0+
EX0-
EX1+
EX1-
EX2+
EX2-
EX3+
EX3-
Applied I/O Model:
E2260
Applied I/O Model:
E2260
Applied I/O Model:E2262
Solution Tutorial
emai l : [email protected] www.moxa.com 6-7
5
Wireless
Ethernet0
Overview
7
8
9
10
12
Peer-to-PeerI/O
Modular
Remote I/O
Media
ConvertersAccessories
11
4
3
2
1
6
Active Ethernet I/OM
odularEthernetSwitches
Managed
EthernetSwitches
Unmanaged
EthernetSwitches
Rackmount
EthernetSwitches
VideoNetworkingProducts
OrderingInform
ation
[ ioLogik E2000/R2000 Series ]
9.51
8.2545.63
5.95 24.44
79
10.98
9.5
11593.02
120.3
64.6
3.81
57.5
6.89
3.39
793.
4
44.5 35.1
LANEthernet: 10/100Mbps, RJ45
Protection: 1.5 KV magnetic isolation
Protocols: Modbus/TCP, TCP/IP, UDP, DHCP, Bootp, SNMP (MIB for
I/O and Network), HTTP, SNTP
SerialInterface: RS-485-2w: Data+, Data-, GND
Serial Line Protection: 15 KV ESD for all signals
Serial Communication ParametersParity: None
Data Bits: 8
Stop Bits: 1
Flow Control: None
Speed: 1200 to 115200 bps
Protocol: Modbus/RTU
Power RequirementsPower Input: 24 VDC nominal, 12 to 48 VDC
DO Power: 24 VDC nominal, up to 30 VDC
Physical CharacteristicsWiring: I/O cable max. 14AWG
Environmental LimitsOperation Temperature: -10 to 60°C (14 to 140°F)
Storage Temperature: -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity: 5 to 95% (non-condensing)
Agency ApprovalsEMI: FCC Part 15, CISPR (EN55022) class A
EMS: IEC 61000-4, IEC 61000-6
Safety: UL508
Shock: IEC 60068-2-27
Freefall: IEC 60068-2-32
Vibration: IEC 60068-2-6
Warranty 2 years (see www.moxa.com/warranty for details)
Common Specifications for ioLogik Active Ethernet I/O
Dimensions (unit = mm)
Input OutputDIO
Digital Analog RTD Thermocouple Digital Relay Analog
E2210 12 8
E2212 8 8 4
E2214 6 6
E2240 8 2
E2242 4 12
E2260 6 4
E2262 8 4
I/O
Model
Side View Front View Rear View
Selection Guide for Active Ethernet I/O
Active Ethernet I/O Common Specifications
www.moxa.com emai l : [email protected] 6-8
Industrial Ethernet Solutions for Control and Automation
6
Active Ethernet I/O
E2210
Digital InputChannels: 12, source type
I/O Mode: DI or Event Counter (up to 900 Hz)
Dry Contact: Logic 0: short to GND, Logic 1: open
Wet Contact: Logic 0: 0 to 3 VDC, Logic 1: 10 to 30 VDC (DI COM to DI)
Common Type: 12 points per COM
Isolation: 3K VDC or 2K Vrms
Specifications
Instant event messaging by TCP/UDP/e-mail/SNMP trap ›DI counter saving when power off ›Easy-to-use Click&Go™ Logic for local output control ›12-point 24 VDC digital input with counter ›8-point 24 VDC digital output with pulse output ›PC-based configuration utility and web console ›I/O control over Modbus/TCP and SNMP protocol ›Windows/WinCE VB/VC and Linux C API ›Peer-to-Peer I/O without controller ›
Introduction
Simple applications without programmingThe ioLogik E2210 makes the trigger event result in digital alarm output directly. Using the ioAdmin UI to setup by “IF-THEN” logic rules, without the needs to write program of PC or Controllers to make it true.
Software event counter input and pulse outputEach digital input can be independently configured for DI or Event Counter mode, and output can be independently configured for DO or Pulse Output mode.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
DI.C
OM
DI0
DI1
DI2
DI3
DI4
DI5
DI6
DI7
DI8
DI9
DI10
DI11
DI.G
ND
DO.P
WR
DO0
DO1
DO2
DO3
DO4
DO5
DO6
DO7
DO.G
ND
Pin Assignment
I/O (left to right)
Digital OutputChannels: 8, sink type, 45 VDC, 200 mA
I/O Mode: DO or Pulse Output (up to 100 Hz)
On-state Voltage: 24 VDC nominal
Output Current Rating: Max. 200 mA per channel
Isolation: 3K VDC or 2K Vrms
Protection: Over-temperature shutdown: min. 175°C Over-current limit: typ. 400 mA/channel
ioLogik E2210:• Active Ethernet I/O with 12 digital inputs and 8 digital outputs LDP1602: • LCD module with 16 x 2 text display and 5 buttons
Ordering Information
ioLogik E2210
Active Ethernet I/O with 12 digital inputs and 8 digital outputs
emai l : [email protected] www.moxa.com 6-9
5
Wireless
Ethernet0
Overview
7
8
9
10
12
Peer-to-PeerI/O
Modular
Remote I/O
Media
ConvertersAccessories
11
4
3
2
1
6
Active Ethernet I/OM
odularEthernetSwitches
Managed
EthernetSwitches
Unmanaged
EthernetSwitches
Rackmount
EthernetSwitches
VideoNetworkingProducts
OrderingInform
ation
Active Ethernet I/O with 8 digital inputs, 8 digital outputs, and 4 configurable DIO
E2212
Digital InputChannels: 8 fixed pointsSensor Type: 2 6-point groups for NPN/PNP typeI/O Mode: DI or Event Counter (up to 900Hz)Dry Contact: Logic 0: short to GND, Logic 1: openWet Contact: Logic 0: 0 to 3 VDC, Logic 1: 10 to 30 VDCCommon Type: 6 points per COM Isolation: 3K VDC or 2K VrmsLow Speed Counter/Frequency: 900 Hz, power off storageOver-voltage Protection: 36 VDCPoweroff Counter Memory: 48 Bytes
Digital Output Channels: 8 fixed points sink, 45 VDC, 200 mAMagnetic Isolation: 2K Vrms or 3K VDCPulse Wave Width: 10 ms/100 HzOver-voltage Protection: 45 VDCOver-current Limit: 400 mA (typical)Over-temperature Shutdown: 175°C (min.)
DI/DO Configurable ChannelsChannels: 4I/O Mode: DI or Event Counter (Up to 900 Hz) DO or Pulse Output (Up to 100 Hz)
Selectable digital I/O combination by software ›Accepts PNP or NPN sensors ›Instant event messaging by TCP/UDP/e-mail/SNMP trap ›Easy-to-use Click&Go™ Logic for local output control ›PC-based configuration utility and web console ›I/O control over Modbus/TCP and SNMP protocol ›Windows/WinCE VB/VC and Linux C API ›Peer-to-Peer I/O without controller ›
Specifications
Introduction
Flexible digital input/output configurationThe ioLogik E2212 provides system integrators with the flexibility to handle various field demands with channels that can be configured by software for input or output operation. You can configure the I/O channels to suit your needs, for combinations such as 12 inputs/8 outputs, 8 inputs/12 outputs, or 10 inputs/10 outputs.
Single Ethernet DIO that accept 3 types of sensorsUnlike traditional Ethernet I/O products, the ioLogik E2212 can connect to dry contact, PNP, and NPN sensors at the same time. You can choose the sensor type based on your wiring approach.
Pin Assignment
I/O (left to right)1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
DI.C
OM1
DI0
DI1
DI2
DI3
DI4
DI5
DI.C
OM2
DI6
DI7
DIO8
DIO9
DIO1
0
DIO1
1
GND
DO0
DO1
DO2
DO3
DO4
DO5
DO6
DO7
DO.P
WR
ioLogik E2212: • Active Ethernet I/O, with 8 digital inputs, 8 digital outputs, and 4 DIOsLDP1602: • LCD module with 16 x 2 text display and 5 buttons
Ordering Information
Active Ethernet I/O ioLogik E2212
www.moxa.com emai l : [email protected] 6-10
Industrial Ethernet Solutions for Control and Automation
6
Active Ethernet I/O
E2214
Digital InputChannels: 6 fixed pointsSensor Type: NPN, PNP, and Dry contactI/O Mode: DI or Event Counter (up to 900 Hz)Dry Contact: Logic 0: short to GND, Logic 1: openWet Contact: Logic 0: 0 to 3 VDC,
Logic 1: 10 to 30 VDCCommon Type: 6 points/2 COM Isolation: 2K VDC or 3K VrmsCounter Frequency: 900 HzDigital Filtering Time Interval: 10 msOver-voltage Protection: 36 VDCRelay Counter Saving: Yes
Digital OutputChannels: 6 Form A (N.O.) relay outputs, 5A Contact Rating: 5A @ 30 VDC, 5A @ 240 VAC, 5A @ 110 VACInductance Load: 2AResistance Load: 5ABreakdown Voltage: 500 VACRelay On/Off Time: 10 ms, 5 ms (Max.)Initial Insulation Resistance: 1G min. @ 500 VDCExpected Life: 100,000 times (Typical)Initial Contact Resistance: 30m ohms (Max.)Pulse Output: 20 operation times per minutes at rated loadIsolation: 3K VDC or 2K Vrms
Specifications
6 DIs supporting PNP, NPN, and Dry contact ›6 Form A relay output (Normal Open) ›Relay specification: 5A/250 VAC, 5A/30 VDC ›Instant event messaging by TCP/UDP/e-mail/SNMP trap ›DI and Relay counter saving when power off ›PC-based configuration utility and web console ›Power On default relay status setting with sequence ›Easy-to-use Click&Go™ Logic for local output control ›Windows/WinCE VB/VC and Linux C API ›I/O control over Modbus/TCP and SNMP protocol ›
IntroductionRelay Counter saving when power offThe ioLogik E2214 is designed to record the counts of the usage of the build-in relay outputs. Even encountering the sudden power fail,
the ioLogik E2214 is able to record the last counts into its internal storage before the power is fully down.
Pin Assignment
ioLogik E2214: • Active Ethernet I/O with 6 digital inputs and 6 relay outputsLDP1602:• LCD module with 16 x 2 text display and 5 buttons
Ordering Information
I/O (left to right)1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
DI.C
OM1
DI0
DI1
DI2
GND
N.C.
DI.C
OM2
DI3
DI4
DI5
GND
N.C.
R0 N
O
R0 C
R1 N
O
R1 C
R2 N
O
R2 C
R3 N
O
R3 C
R4 N
O
R4 C
R5 N
O
R5 C
DI Group 1 DI Group 2 Relays 0 to 5
ioLogik E2214
Active Ethernet I/O with 6 digital inputs and 6 relay outputs
emai l : [email protected] www.moxa.com 6-11
5
Wireless
Ethernet0
Overview
7
8
9
10
12
Peer-to-PeerI/O
Modular
Remote I/O
Media
ConvertersAccessories
11
4
3
2
1
6
Active Ethernet I/OM
odularEthernetSwitches
Managed
EthernetSwitches
Unmanaged
EthernetSwitches
Rackmount
EthernetSwitches
VideoNetworkingProducts
OrderingInform
ation
E2240
Analog InputChannels: 8Resolution: 16-bitInput Range: +/-150 mV, +/-500 mV, +/-5 V, +/-10 V, 0 to 20 mA, 4 to 20 mAData Format: 16-bit integer (2’s complement)Accuracy: +/- 0.1% FSR @ 25°C, +/- 0.3% FSR @ -10 and 60°CSampling Rate (all channels): 10 samples/sec (voltage), 6 samples/sec (current)Input Impedance: 900k ohmsBuilt-in Resistor for Current Input: 106 ohmsCMR @ 50/60 Hz: 95 dB min.Zero Drift: +/- 9 μV/°C
Span Drift: +/- 25 ppm/°CIsolation: 3K VDC or 2K Vrms
Analog OutputChannels: 2Resolution: 12-bitOutput Range: 0 to 10V, 4 to 20 mADrive Voltage: 15 VDC for current outputData Format: 12 bitAccuracy: +/- 0.1% FSR @ 25°C, +/- 0.3% FSR @ -10 and 60°CZero Drift: +/- 9 μV/°CSpan Drift: +/- 25 ppm/°CLoad Resistor: < 250 ohms
Instant event messaging by TCP/UDP/e-mail/SNMP trap ›Easy-to-use Click&Go™ Logic for local output control ›8-channel analog inputs for voltage, current signal ›2-channel analog outputs for voltage, current actuator control ›PC-based configuration utility and web console ›Windows/WinCE VB/VC and Linux C API ›I/O control over Modbus/TCP and SNMP protocol ›NIST-traceable calibration ›
Specifications
Pin AssignmentI/O (left to right)
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
Vin0
+
Vin0
-
Vin1
+
Vin1
-
Vin2
+
Vin2
-
Vin3
+
Vin3
-
Vin4
+
Vin4
-
Vin5
+
Vin5
-
Vin6
+
Vin6
-
Vin7
+
Vin7
-
Vout
0+
Vout
0-
Iout
0+
Iout
0-
Vout
1+
Vout
1-
Iout
1+
Iout
1-
ioLogik E2240: • Active Ethernet I/O with 8 analog inputs and 2 analog outputsLDP1602: • LCD module with 16 x 2 text display and 5 buttons
Ordering Information
Introduction
Combination of analog input and outputThe ioLogik E2240 is combination of analog input and output in one module. It supports sensors and actuators include pH, conductivity,
pressure, flow, and valves.
Active Ethernet I/O ioLogik E2240
Active Ethernet I/O with 8 analog inputs and 2 analog outputs
www.moxa.com emai l : [email protected] 6-12
Industrial Ethernet Solutions for Control and Automation
6
Active Ethernet I/O
Active Ethernet I/O with 4 analog inputs and 12 configurable DIO
E2242
Analog Input Channels: 4, differential inputResolution: 16-bitI/O Mode: 4 to 20 mA, 0 to 10 VSampling Rate (all channels): 100 samples/sec Accuracy: +/- 0.1% FSR @ 25˚C, +/-0.3% FSR @ -10 and 60°CInput Impedance: 900K ohms (min.)Built-in Resistor for Current Input: 106 ohms
Configurable Digital Input/OutputChannels: 12 points
Digital InputSensor Type: NPN, PNPI/O Mode: DI or event counter (up to 900 Hz)Dry Contact: Logic 0: short to GND, Logic 0: OpenWet Contact: Logic 0: 0 to 3 VDC, Logic 1: 10 to 30 VDCCommon Type: 6 points per COM Power off Storage for Counter Mode: Yes
Digital Output Sensor Type: Sink, 45 VDC, 200 mAPulse Wave Width: 10 ms /100 Hz
4 fixed differential analog input channels ›12 configurable digital input/output channels ›Instant event messaging by TCP/UDP/e-mail/SNMP Trap ›Adjustable sampling rate ›PC-based configuration utility and web console ›Easy-to-use Click&Go™ Logic for local output control ›I/O control over Modbus/TCP and SNMP protocol ›NIST traceable calibration ›
Specifications
Ordering Information
ioLogik E2242:• Active Ethernet I/O with 4 analog inputs and 12 configurable DIOsLDP1602:• LCD module with 16 x 2 text display and 5 buttons
IntroductionBetter I/O matrix for AI monitoringThe ioLogik E2242 is designed for AI monitoring and alarm, such as water tank monitoring. I/O combination of ioLogik E2242 provides the ability to allow one AI channel to trigger up to 3 digital outputs for “Low”, “High”, and “High, High” alarm points.
Front-end signal conditionerThe ioLogik E2242 can co-work with PLC by digital output to reduce the PLC AI operating loading. It is also a backup system of main control system by its active messaging.
Pin Assignment
I/O (left to right)1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
Vin0
+
Vin0
-
Vin1
+
Vin1
-
Vin2
+
Vin2
-
Vin3
+
Vin3
-
DI.C
OM1
DIO0
DIO1
DIO2
DIO3
DIO4
DIO5
GND
GND
DIO6
DIO7
DIO8
DIO9
DIO1
0
DIO1
1
DI.C
OM2
ioLogik E2242
Preliminary
emai l : [email protected] www.moxa.com 6-13
5
Wireless
Ethernet0
Overview
7
8
9
10
12
Peer-to-PeerI/O
Modular
Remote I/O
Media
ConvertersAccessories
11
4
3
2
1
6
Active Ethernet I/OM
odularEthernetSwitches
Managed
EthernetSwitches
Unmanaged
EthernetSwitches
Rackmount
EthernetSwitches
VideoNetworkingProducts
OrderingInform
ation
Active Ethernet I/O with 6 RTD inputs and 4 digital outputs
E2260
RTDChannels: 6, RTD channelsInput Type: Pt, JPt, Ni, RTD sensor, resisterSampling Rate: 12 samples/sec (all channels)Resolution: 0.1˚C or 0.1 ohmAccuracy: +/- 0.1% FSR @ 25˚C, +/-0.3% FSR @ -10 and 60°CInput Impedance: 625K ohms (min.)
Digital Output Channels: 4, sink, 45 VDC, 200 mAOptical Isolation: 3K VDC or 2K VrmsPulse Out Frequency: 100 HzOver-voltage Protection: 45 VDCOver-current Limit: 750 mAOver-temperature Shutdown: 175˚C
Support PT, JPT, Ni RTD sensor types, and resistance ›Adjustable RTD sampling rate ›Instant event messaging by TCP/UDP/e-mail/SNMP trap ›PC-based configuration utility and web console ›Easy-to-use Click&Go™ Logic for local output control ›Windows/WinCE VB/VC and Linux C API ›I/O control over Modbus/TCP and SNMP protocol ›NIST traceable calibration ›
Specifications
Pin Assignment
I/O (left to right)1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
EX0
IN0+
IN0-
EX1
IN1+
IN1-
EX2
IN2+
IN2-
EX3
IN3+
IN3-
EX4
IN4+
IN4-
EX5
IN5+
IN5-
DO.G
ND
DO0
DO1
DO2
DO3
DO.P
WR
Ordering InformationioLogik E2260:• Active Ethernet I/O with 6 RTD inputs and 4 digital outputsLDP1602: • LCD module with 16 x 2 text display and 5 buttons
Introduction
Brings intelligence to temperature measurementThe ioLogik temperature I/O brings intelligence to temperature sensors. It equipped virtual channels which are available to calculate the average value of each channel and the difference between two substantial channels. And it doesn’t need any controller or PC.
Great compatibility with popular RTD temperaturesensorsThe ioLogik E2260 offers including PT100, PT1000, JPT, Ni sensor types and resistor up to 2.2K ohms. It supports you using your own resistance sensor, such as PTC, NTC for your HVAC applications.
Active Ethernet I/O ioLogik E2260
www.moxa.com emai l : [email protected] 6-14
Industrial Ethernet Solutions for Control and Automation
6
Active Ethernet I/O
Active Ethernet I/O with 8 thermocouple inputs and 4 digital outputs
E2262
Thermocouple InputChannels: 8, thermocouple inputSensor Type: J, K, T, E, R, S, B, N type TC and mV modeSampling Rate (all channels): 10 samples/sec Effective Resolution: 16-bitAccuracy: +/- 0.1% FSR @ 25˚C, +/- 0.3% FSR @ -10 and 60°CInput Impedance: 1M ohms or better
Digital Output Channels: 4, sink, 45 VDC, 200 mAIsolation: 3K VDC or 2K VrmsPulse-out Frequency: 100 HzOver-voltage Protection: 45 VDCOver-current Limit: 750 mAOver-temperature Shutdown: 175˚C
Supports J, K, T, E, R, S, B, and N type thermocouple and mV ›modesAdjustable sampling rate ›Instant event messaging by TCP/UDP/e-mail/SNMP Trap ›PC-based configuration utility and web console ›Easy-to-use Click&Go™ Logic for local output control ›Windows/WinCE VB/VC and Linux C API ›I/O control over Modbus/TCP and SNMP protocol ›NIST traceable calibration ›
Specifications
Ordering InformationioLogik E2262:• Active Ethernet I/O with Ethernet with 8 thermocouple inputs and 4 digital outputsLDP1602:• LCD module with 16 x 2 text and 5 buttons
Introduction
Extending the wiring lengthThe ioLogik E2262 extends 10 times of your sensors’ wiring length. For example, 10m length of K-Type sensor is normal, the ioLogik E2262 can accept 100m K-Type TC wiring length.
Brings intelligence to temperature measurementThe ioLogik temperature I/O brings intelligence to temperature sensors. It equipped virtual channels which are available to calculate the average value of each channel and the difference between two substantial channels. And it doesn’t need any controller or PC.
I/O Pin Assignment
I/O (left to right)
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
TC.G
ND0
TC0
+
TC0
-
TC1
+
TC1
-
TC2
+
TC2
-
TC3
+
TC3
-
TC4
+
TC4
-
TC.G
ND1
TC5
+
TC5
-
TC6
+
TC6
-
TC7
+
TC7
-
DO.G
ND
DO0
DO1
DO2
DO3
DO.P
WR
ioLogik E2262
Preliminary
emai l : [email protected] www.moxa.com 6-15
5
Wireless
Ethernet0
Overview
7
8
9
10
12
Peer-to-PeerI/O
Modular
Remote I/O
Media
ConvertersAccessories
11
4
3
2
1
6
Active Ethernet I/OM
anagedEthernetSwitches
Unmanaged
EthernetSwitches
Rackmount
EthernetSwitches
VideoNetworkingProducts
OrderingInform
ation
Modular
EthernetSwitches
R2000 Serial Remote I/O
The ioLogik R2000 series was designed for system integrators to acquire and control remote digital and analog devices over RS-485. Types of digital on/off devices that can be controlled include proximity switches, mechanical switches, push buttons, optical sensors, LEDs, and light switches. Types of analog devices that can be controlled include pH, conductivity, temperature, humidity, pressure, flow,
actuator, and valves.
The ioLogik R2000 series can work with the standard Modbus protocol. SCADA software or the MXIO DLL library may be used to access the server.
Linking Input and Output Signals over RS-485
RS-485 is still the most common interface used by many industries, and Moxa now offers a high quality line of remote I/O that support RS-485.
Multi-functional digital I/O with DI/Event Counter and DO/Pulse •Output modesMulti-function analog I/O with mA/mV/Voltage modes•Over-current and over-voltage protection•
High-reliability I/O design that ensures accuracy and reliability during •field operationRemote management of firmware upgrades over RS-485 network•
Full Range of DI/DO and AI/AO Models
Each input signal can be independently configured, with DI/Event Counter modes available for digital inputs and voltage/current modes available for analog inputs. Each digital output can be independently configured for DO or Pulse Output mode. The analog input channels
support various signals ranging from +/-150 mV to +/-10V at 16-bit resolution. The analog output channels support 0 to 10V and 4 to 20 mA @ 12-bit resolution.
Independent Configuration of Multi-functional DI/DO and AI/AO Channels
Traditionally, it was difficult for users to update firmware over RS-485. Moxa now provides an easy method for updating firmware over an RS-485 network that allows users to perform remote firmware updates, reducing maintenance time and cost.
Easy Management of Firmware over RS-485
Traditionally, a PC was required in order to configure a remote I/O. Moxa offers the optional snap-on LCD module as an easier way to configure and monitor the ioLogik E2000, R2000, and ioMirror E3000 series.
The LCD module is hot-pluggable, so it can be installed or removed without turning the server off.
Snap-On LCD Module
Serial Remote I/O Solution Tutorial
www.moxa.com emai l : [email protected] 6-16
Industrial Ethernet Solutions for Control and Automation
6
Serial Rem
ote I/O
RS-485 remote I/O with 12 digital inputs and 8 digital outputs
R2110
Digital InputChannels: 12, source type
I/O Mode: DI or Event Counter (up to 50 Hz)
Dry Contact: Logic 0: short to GND, Logic 1: open
Wet Contact: Logic 0: 0 to 3 VDC, Logic 1: 10 to 30 VDC (DI COM to DI)
Common Type: 12 points per COM
Isolation: 3K VDC or 2K Vrms
Digital OutputChannels: 8, sink type, 45 VDC, 200 mA
I/O Mode: DO or Pulse Output (up to 50 Hz)
On-state Voltage: 24 VDC nominal
Output Current Rating: Max. 200 mA per channel
Optical Isolation: 3K VDC or 2K Vrms
Protection: Over-temperature shutdown: min. 175°C,
Over-current limit: typ. 400 mA/channel
Output Frequency: 50 Hz
Specifications
12-channel 24 VDC digital inputs with DI/Event Counter ›mode, software selectable filtering time8-channel 24 VDC digital outputs with pulse output mode and ›software selectable pulse widthLED indicators for all I/O channels ›Over-temperature protection (up to 175°C) ›Over-current protection (400 mA/channel) ›Easy-to-use, quick programming library for VB, VC++, BCB ›Firmware upgradable over RS-485 ›
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
DI.C
OM
DI0
DI1
DI2
DI3
DI4
DI5
DI6
DI7
DI8
DI9
DI10
DI11
DI.G
ND
DO.P
WR
DO0
DO1
DO2
DO3
DO4
DO5
DO6
DO7
DO.G
NDPin Assignment
I/O (left to right)
ioLogik R2110: • RS-485 remote I/O with 12 digital inputs and 8 digital outputsLDP1602: • LCD module with 16 x 2 text display and 5 buttons
Ordering Information
ioLogik R2110
emai l : [email protected] www.moxa.com 6-17
5
Wireless
Ethernet0
Overview
7
8
9
10
12
Peer-to-PeerI/O
Modular
Remote I/O
Media
ConvertersAccessories
11
4
3
2
1
6
Active Ethernet I/OM
anagedEthernetSwitches
Unmanaged
EthernetSwitches
Rackmount
EthernetSwitches
VideoNetworkingProducts
OrderingInform
ation
Modular
EthernetSwitches
RS-485 remote I/O with 8 analog inputs and 2 analog outputs
R2140
8-channel analog inputs for millivolts (mV), voltage, current ›signal with wire-off detection (at 4 to 20 mA)2-channel analog outputs for voltage, current actuator control ›16-bit resolution analog inputs, 12-bit resolution analog output ›Easy-to-use, quick programming library for VB, VC++, BCB ›NIST-Traceability calibration for analog I/O channels ›Firmware upgradable over RS-485 ›
Analog InputChannels: 8
Resolution: 16-bit
Input Range: +/-150 mV, +/-500 mV, +/-5 V, +/-10 V, 0 to 20 mA, 4 to 20 mA
Data Format: 16-bit integer
Accuracy: +/- 0.1% FSR @ 25°C,
+/- 0.3% FSR @ -10 and 60°C
Sampling Rate (all channels): 10 samples/sec (voltage),
6 samples/sec (current)
Built-in Resistor for Current Input: 106 ohms
CMR @ 50/60 Hz: 95 dB min.
Optical Isolation: 2K VDC or 3K Vrms
Analog OutputChannels: 2
Resolution: 12-bit
Output Range: 0 to 10V, 4 to 20 mA
Drive Voltage: 15 VDC for current output
Accuracy: +/- 0.1% FSR @ 25°C,
+/- 0.3% FSR @ -10 and 60°C
Zero Drift: +/- 9 μV/°C
Span Drift: +/- 25 ppm/°C
Load Resistor: < 250 ohms
Specifications
Pin Assignment
I/O (left to right)1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
Vin0
+
Vin0
-
Vin1
+
Vin1
-
Vin2
+
Vin2
-
Vin3
+
Vin3
-
Vin4
+
Vin4
-
Vin5
+
Vin5
-
Vin6
+
Vin6
-
Vin7
+
Vin7
-
Vout
0+
Vout
0-
Iout
0+
Iout
0-
Vout
1+
Vout
1-
Iout
1+
Iout
1-
ioLogik R2140:• RS-485 remote I/O with 8 analog inputs and 2 analog outputsLDP1602: • LCD module with 16 x 2 text display and 5 buttons
Ordering Information
Serial Remote I/O ioLogik R2140
www.moxa.com emai l : [email protected] 6-18
Industrial Ethernet Solutions for Control and Automation
6
Active Ethernet I/O
Snap-on module for ioLogik 2000 and ioMirror 3000 series
1. Remove the ioLogik’s top cover. 2. Plug in the LCD module.
3. Check and configure the IP address. 4. Check IP and I/O status.
Hot-pluggable display module for ioLogik Active Ethernet I/O, ›serial I/O, and Peer-to-Peer I/OEasy, portable configuration kit for IP display and configuration ›Direct display for analog value and digital input, counter status ›No battery required (powered by I/O ) ›
LDP1602 LCD Module
Installing the LCD Module
SpecificationsLCD Screen: 16 x 2 text display (in English)
Operating Temperature: 0 to 55°C (32 to 131°F)
Storage Temperature: -20 to 70°C (-4 to 158°F)
Ambient Relative Humidity: 5 to 95% (non-condensing)
LDP1602: • LCD module with 16 x 2 text display and 5 buttons
Ordering Information
LDP1602 LCD
Module
Industrial Ethernet Solutions for Control and Automation
Peer-to-Peer I/O
ioMirror Peer-to-Peer I/O
7Solution Tutorial 7-2
ioMirror E3210 Ethernet Peer-to-Peer I/O with 8 DI, 8 DO 7-5
Peer-to-Peer I/O
Industrial Ethernet Solutions for Control and Automation
www.moxa.com emai l : [email protected] 7-2
Industrial Ethernet Solutions for Control and Automation
7
Peer-to-Peer I/O
E3000 Peer-to-Peer I/ODirect Input-to-output Communication over an IP Network
The ioMirror E3000 Ethernet I/O is designed as a cable replacement solution that sends input signals to remote outputs over an IP network. ioMirror can be used to connect remote sensor signals to PLC
controllers, DCS systems, or display devices over a network, without installing additional signal wires.
ioMirror in Different Network Infrastructures
Solution Tutorial
#3 Wireless LAN Network
#2 Fiber Ethernet Network#1 Ethernet Network
emai l : [email protected] www.moxa.com 7-3
Peer-to-Peer I/O 0
6
OverviewPeer-to-Peer I/O
Active Ethernet I/O
7
8
9
10
12
Modular
Remote I/O
Media
ConvertersAccessories
Ordering Inform
ation
11
5
Wireless
Ethernet
4
3
2
1
Modular
EthernetSwitches
Unmanaged
EthernetSwitches
Rackmount
EthernetSwitches
Managed
EthernetSwitches
VideoNetworkingProducts
The Easiest Way to Connect Input Signals to Remote Outputs over an IP NetworkConfiguration of ioMirror is easy using ioMirrorAdmin for Windows. With ioMirrorAdmin, input-to-output signal mapping between ioMirror can be configured from a local or remote host. “Basic Configuration,” which is also available in the web console, is used for simple mapping of all channels from Module-to-Module. “Advanced Configuration”
is used for customized Channel-to-Channel mapping and allows one input channel to be mapped to multiple output channels. ioMirrorAdmin also provides a graphical representation of ioMirror relationships complete with signal direction, making it easy to map signals quickly and accurately.
Take Advantage of Existing Ethernet InfrastructureWhy spend extra effort installing additional signal wires if you already have a high-speed Ethernet infrastructure? Modern LANs, including Ethernet, optical fiber, and wireless, already provide the necessary
high-speed connectivity. General input/output signals can be carried by a pair of ioMirror I/O, making wiring simpler than ever.
Simultaneously Send Input Signals to Two LocationsThe ioMirror E3000 can send one input signal simultaneously to two digital outputs over the network. This function could be used, for example, to monitor tank levels from two different display panels.
Easy and Flexible InstallationInstalling ioMirror E3000 is easy using the Windows utility that comes with each server. If all channels are mapped from one module to another, all you need to do is assigning the remote IP address. For
more sophisticated mapping, individual channels can be mapped quickly and easily using the comprehensive graphical user interface.
Useful Troubleshooting ToolsMany useful tools are provided that help keep you informed about the health and performance of your ioMirror E3000 and connections.
Optional LCD attachment for local IP configuration•Alarm port for 24 VDC alarm devices, such as pole displays, LEDs, •
and buzzersRemote alarm and independent event log that records each •connection and disconnection
Using ioMirror as Part of a Tank Monitoring PanelThis real-world application uses ioMirror in the vegetable oil industry, where oil tank levels are monitored constantly. The customer uses a computer-based SCADA system for general management and control, with an LED panel in the control room for direct monitoring of tank levels. The original solution was a significant challenge, since it meant maintaining 200 meters of dedicated copper wire for 24 V signals. The advantage of using the ioMirror Ethernet I/O was that the existing
fiber network could be used instead. The level sensor simply connects to an ioMirror, which is connected to the network. Sensor signals are automatically forwarded over the network to another ioMirror, which sends matching 24 VDC digital output signals directly to the LED. The ioMirror system was so easy to set up that the customer completed the project in just a few days, and at very little cost.
Solution Tutorial
www.moxa.com emai l : [email protected] 7-4
Industrial Ethernet Solutions for Control and Automation
7
Peer-to-Peer I/O
LANEthernet: 10/100 Mbps, RJ45
Protection: 1.5 KV magnetic isolation
Protocols: Modbus/TCP, TCP/IP, UDP, DHCP, Bootp, HTTP, SNTP
Power RequirementsInput Voltage: 24 VDC nominal, 12 to 48 VDC
DO Power: 24 VDC nominal, up to 45 VDC
Physical CharacteristicsWiring: I/O cable max. 14 AWG
Environmental LimitsOperating Temperature: -10 to 60°C (14 to 140°F), 5 to 95% RH
Storage Temperature: -40 to 85°C (-40 to 185°F), 5 to 95% RH
Regulatory Approvals
EMI: FCC Part 15, CISPR (EN55022) class A
EMS: IEC 61000-4, IEC 61000-6
Safety: UL508
Shock: IEC 60068-2-27
Freefall: IEC 60068-2-32
Vibration: IEC 60068-2-6
Warranty 2 years (see www.moxa.com/warranty for details)
Common Specifications for ioMirror E3000 series
Dimensions (unit = mm)
9.51
8.2545.63
5.95 24.44
79
10.98
9.5
11593.02
120.3
64.6
3.81
57.5
6.89
3.39
793.
4
44.5 35.1
Comm
on Specifications
Side View Front View Rear View
emai l : [email protected] www.moxa.com 7-5
0
6
OverviewPeer-to-Peer I/O
Active Ethernet I/O
7
8
9
10
12
Modular
Remote I/O
Media
ConvertersAccessories
Ordering Inform
ation
11
5
Wireless
Ethernet
4
3
2
1
Modular
EthernetSwitches
Unmanaged
EthernetSwitches
Rackmount
EthernetSwitches
Managed
EthernetSwitches
VideoNetworkingProducts
E3210
Digital InputChannels: 8, source type
I/O Mode: Digital Input
Dry Contact: Logic 0: close to GND,
Logic 1: open
Wet Contact: Logic 0: 0 to 3 VDC,
Logic 1: 10 to 30 VDC
Isolation: 2K Vrms
Common Type: 8 points per COM
Digital OutputChannels: 8, sink type
I/O Mode: Digital output
On-status Voltage: 24 VDC (typical)
Output Current Rating: Max. 200 mA per channel
Optical Isolation: 2K Vrms or 3K VDC
Protection: Over-voltage Protection: 45 VDC Over-current Limit: 600 mA (typical) Over-temperature Shutdown: 160°C (min.)
Alarm Port OutputChannels: 1, sink type
On-status Voltage: 24 VDC (typical)
Output Current Rating: Max. 200 mA per channel
Optical Isolation: 2K Vrms or 3K VDC
Specifications
Direct input-to-output signal communication over IP ›High speed Peer-to-Peer I/O within 20 ms ›One physical alarm port for connectivity status ›Quick and easy utility and web-based settings ›Local alarm and remote alarm message ›Supports Modbus/TCP for remote monitoring ›Optional LCD module for simple setting ›
Introduction
Direct input-to-output communication over IPThe ioMirror E3000 Ethernet I/O is designed as a cable-replacement solution that connects remote digital input signals to output signals over an IP network. The ioMirror E3210 provides 8 digital input channels, 8 digital output channels, and a 10/100M Ethernet interface. Up to 8 pairs of digital input and output signals can be exchanged over Ethernet with another ioMirror E3210 as well as to a local PLC or DCS controller. Over a local area network, the ioMirror achieves low signal latency, which is typically 20 ms. With ioMirror, remote sensors can now be connected to local controllers or display panels over copper, fiber, or wireless Ethernet infrastructures. Signals can be transmitted over virtually unlimited distances, without noise problems.
Split sensor signals to sixteen different locationsThe ioMirror E3000 can split one input signal to two digital output channels at two different IP addresses. Eight tank level signals can be monitored at sixteen different display panels, all at the same time.
Local alarm with remote alarm messages for monitoring connectivityThe ioMirror E3210 has a 24 VDC alarm output channel that can activate an attached buzzer or LED display when the connection fails. In addition, both ioMirror modules can send messages to the ioEventLog software. This ensures that at least one of the warning messages will reach the ioEventLog software.
iomirror E3210
Ethernet Peer-to-Peer I/O with 8 digital inputs and 8 digital outputs
Peer-to-Peer I/O
www.moxa.com emai l : [email protected] 7-6
Industrial Ethernet Solutions for Control and Automation
7
Peer-to-Peer I/O
Digital Output
DO
.PW
R
DO
0
DO
1
DO
2
DO
3
DO
4
DO
5
DO
7
DO
6
DO
.GN
D
-+
I/O Pin Assignment
Wiring Example
I/O (left to right)
Alarm Port
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
DI.C
OM
DI0
DI1
DI2
DI3
DI4
DI5
DI6
DI7
DI.G
ND
Alar
m
DO.P
WR
DO0
DO1
DO2
DO3
DO4
DO5
DO6
DO7
DO.G
ND
Digital Input (Dry Contact)
Digital Input (Wet Contact with NPN Sensor)
DI6
DI5
DI4
DI3
DI2
DI0
DI.C
OM
DI.G
ND
ALA
RM
GN
D
+-
ioMirror E3210: • Ethernet Peer-to-Peer I/O with 8 digital inputs and 8 digital outputsLDP1602: • LCD module with 16 x 2 text display and 5 buttons
Ordering Information
+ -
Pin1
Brown12 to 24 V
12~24 VNPN output
0V
Black
Blue
NPN Sensors
DI.C
OM
DI5
DI6
DI7
DI4
DI3
DI2
DI1
DI0
DI.C
OM
ioMirror E3210
Solution Tutorial 8-2
NA-4010 Ethernet network adaptor 8-7
NA-4020/4021 RS-485 or RS-232 network adaptors 8-8
M-1000 Digital input modules 8-9
M-2000 Digital output modules 8-12
M-3000 Analog input modules 8-16
M-6000 Temperature input modules 8-18
M-4000 Analog output modules 8-19
M-7000 Power modules 8-20
Accessories 8-22
Modular Remote I/O
Modular Remote I/O
8
Industrial Ethernet Solutions for Control and Automation
www.moxa.com emai l : [email protected] 8-2
Industrial Ethernet Solutions for Control and Automation
8
Modular Rem
ote I/O
Custom SoftwareMXIO Library
WiFi
SCADA
Ethernet Switch
Wireless Serial Device Server
E2210E2212DI/DO
E2240AI/AO
E2242Mix I/O
E2260E2262RTD/TC
E2214RelayOutput
Fiber Optic Cable (100BaseFX)Twisted Pair Cable (10/100BaseT(X) or 10/100/1000BaseT(X))RS-485/RS-232 Cable
NA-4020RS-485 Modular I/O
ioMirror ioMirror
Embedded Computer
Analog Input Modules M-3400 Series
Temperature Input ModulesM-6200 Series
Digital Input ModulesM-1400/1800/1600 Series
Digital Output ModulesM-2400/2800/2600 Series
Analog Output Modules M-4200 Series
Turbo Ring
Discrete I/O
Analog I/O
Temperature sensor
ActuatorRelayAlarmOn/off deviceHigh/LowOpen/Close
PressureHumidty sensorFlow sensorDrive/ValveHigh/LowOpen/Close
NA-4021 RS-232 Modular I/O
NA-4010 Ethernet Modular I/O
High Density, Slice Form Factor Remote I/OCreate a Compact, Flexible I/O Solution
Solution Tutorial
emai l : [email protected] www.moxa.com 8-3
0
8
7
OverviewM
odular Remote I/O
Peer-to-PeerI/O
9
10
12
Media
ConvertersAccessories
Ordering Inform
ation
11
6
Active Ethernet I/O
5
Wireless
Ethernet
4
3
2
1
Modular
EthernetSwitches
Unmanaged
EthernetSwitches
Rackmount
EthernetSwitches
Managed
EthernetSwitches
VideoNetworkingProducts
Flexible remote I/O solution with various I/O module 4000 Modular Remote I/OHigh Density, Slice Form Factor Remote I/O
Slice Type I/O Modules Removable Terminal Block Module Coding TagSpring Type Terminal Block
The ioLogik 4000 provides spring type, removable terminal blocks (RTB) that allow you to preserve field wiring before replacing any I/O
Hassle-free Installation and Management
expansion modules. Each I/O expansion module can be quickly and easily replaced.
Solution TutorialModular Remote I/O
Easy Installation and Maintenance
www.moxa.com emai l : [email protected] 8-4
Industrial Ethernet Solutions for Control and Automation
8
Modular Rem
ote I/O
The ioAdmin allows you to configure and monitor ioLogik 4000 modular I/O remotely. ioAdmin automatically detects the installed ioLogik Ethernet I/O and presents the installation sequence of the modular I/O modules. ioAdmin also detects and generates a Modbus address table, which can be printed or stored on a computer for SCADA software configuration.
The utility also allows you to:
1. Automatically search for installations
2. Look for help using online documentation
3. Generate reports of I/O combinations
What You See Is What You Install!!
The ioAdmin is a powerful, Windows-based configuration and management tool. You can use ioAdmin to modify the IP address, update communication parameters, and configure all other settings easily. In addition, ioAdmin can be used to configure ioLogik modular I/O from a remote host. This means that ioLogik modular I/O may be configured from anywhere over the Ethernet, which can help reduce your operating expense.
The M-2402, M-2403, M-2404, and M-2405 modules include a self-diagnostic function to guarantee that the digital output signal is monitored electronically. The hardware-monitored status is written to
the logic system, and you can obtain the actual digital output status over the network when the software sends a command to the module. This is all done internally, and configuration is not required.
Although ioAdmin is the main configuration interface for ioLogik, you can also check the following information using the ioLogik’s web console:
• Network configuration
• Modular I/O
• Status of each channel
Solution Tutorial
Easy-to-Use Windows Utility
Self-diagnostic Function for Digital Output Channels
Check Remote I/O Status with a Web Browser
Remote Configuration
emai l : [email protected] www.moxa.com 8-5
0
8
7
OverviewM
odular Remote I/O
Peer-to-PeerI/O
9
10
12
Media
ConvertersAccessories
Ordering Inform
ation
11
6
Active Ethernet I/O
5
Wireless
Ethernet
4
3
2
1
Modular
EthernetSwitches
Unmanaged
EthernetSwitches
Rackmount
EthernetSwitches
Managed
EthernetSwitches
VideoNetworkingProducts
Dimensions (unit = mm)
Dimensions for ioLogik 4000 Modular Remote I/O
Modular Remote I/O
SCADA DAQ Software
SCADA SoftPLC
OPC Client
Modbus SpecificDriver
3rd PartyOPC Server
Visual BasicC-Applications
Programming ToolsProgramming Tools
MXIO DLL
Utility & DiagnosticsUtility & Diagnostics
ioAdminWindows Utility
RS-232/485 Ethernet
Host ComputerHost Computer
SCADA Software PackagesSCADA Software Packages
Modbus/TCPModbus/RTU
I/O ModuleI/O Network Adaptor
Modular Remote I/O
The ioLogik 4000 supports the standard Modbus protocol and is compatible with most SCADA software. In addition, Moxa provides an easy-to-use MXIO DLL library that helps programmers develop application software with Visual Basic or C language under Windows.
The ioLogik 4000 line was designed for the standard Modbus protocol and can be used with most SCADA systems. The following SCADA software has been found to be compatible with ioLogik 4000: Modicon Driver, Wonderware Intouch, GE Fanuc iFix and CIMPLICITY, Broadwin, kingview, and Citect. In addition, we successfully tested the OPC Server “Kepware,” which means that ioLogik 4000 may be accessed either from a SCADA system or through an OPC Server.
Note: The installation guides for different SCADA software packages can be downloaded from Moxa’s download center.
Side View Front View Removable ViewSide View Front View
15
99
30
70
12 70
35
99
60
30
36 28
70
99
36 35
28
60
70 42
99
36 35
28
99
60
Solution TutorialModular Remote I/O
Versatile Software Support
Supports Various SCADA Software Packages
www.moxa.com emai l : [email protected] 8-6
Industrial Ethernet Solutions for Control and Automation
8
Modular Rem
ote I/O
Digital Inputs
Specs
Model M-1400 M-1401 M-1410 M-1411 M-1800 M-1801 M-1600 M-1601 M-1450 M-1451
Channels 4 4 4 4 8 8 16 16 4 4
Sink/Source Sink Source Sink Source Sink Source Sink Source – –
Connector RTB RTB RTB RTB RTB RTB 20-pin 20-pin RTB RTB
Voltage 24 VDC 24 VDC 48 VDC 48 VDC 24 VDC 24 VDC 24 VDC 24 VDC 110 VAC 220 VAC
Isolation Optical isolation
Digital Outputs
Specs
Model M-2400 M-2401 M-2800 M-2801 M-2600 M-2601 M-2402 M-2403 M-2404 M-2405 M-2250 M-2254
Channels 4 4 8 8 16 16 4 4 4 4 2 2
Sink/Source Sink Source Sink Source Sink Source Sink Source Sink Source Relay Triac
Connector RTB RTB RTB RTB 20-pin 20-pin RTB RTB RTB RTB RTB RTB
Voltage 24 VDC 24 VDC 24 VDC 24 VDC 24 VDC 24 VDC 24 VDC 24 VDC 24 VDC 24 VDC 230 VAC/ 24 VDC
12 to 125 VAC
Current 0.5A 0.5A 0.5A 0.5A 0.3A 0.3A 0.5A 0.5A 2.0A 2.0A 2.0A 0.5A
Isolation Optical isolation
Diagnostics – – – – – – Yes Yes Yes Yes – –
Analog Inputs
Specs
Model M-3400 M-3402 M-3410 M-3412 M-3414 M-3401 M-3403 M-3411 M-3413 M-3415 M-6200 M-6201
Channels 4 4 4 4 4 4 4 4 4 4 2 2
Current 0 to 20 mA
4 to 20 mA – – – 0 to 20
mA4 to 20
mA – – – – –
Voltage – – 0 to 10V -10 to 10V 0 to 5V – – 0 to 10V -10 to
10V 0 to 5V – –
Connector RTB RTB RTB RTB RTB RTB RTB RTB RTB RTB RTB RTB
Resolution 12-bit 12-bit 12-bit 12-bit 12-bit 14-bit 14-bit 14-bit 14-bit 14-bit – –
Isolation Optical isolation
Sensor Input – – – – – – – – – – RTD
(ohm)
Thermo- couple(mV)
Analog Outputs
Specs
Model M-4201 M-4202 M-4210 M-4211 M-4212
Channels 2 2 2 2 2
Current 0 to 20 mA 4 to 20 mA – – –
Voltage – – 0 to 10V -10 to 10V 0 to 5V
Connector RTB RTB RTB RTB RTB
Resolution 12-bit 12-bit 12-bit 12-bit 12-bit
Isolation Optical isolation
Modular Remote I/O Selection Guide
Selection Guide
I/O Modules
Power Modules
Power Modules
Specs
Model M-7001 M-7002 M-7803 M-7804 M-7805 M-7806
Channels 0 0 8 8 8 8
Voltage 24 VDC DC: 5, 24, 48 VDCAC: 110/220 VAC - 0 VDC 24 VDC 4-ch for 0 VDC
4-ch for 24 VDC
Purpose System Power Field Power Shield Signal Field Power Field Power Field Power
emai l : [email protected] www.moxa.com 8-7
0
8
7
OverviewM
odular Remote I/O
Peer-to-PeerI/O
9
10
12
Media
ConvertersAccessories
Ordering Inform
ation
11
6
Active Ethernet I/O
5
Wireless
Ethernet
4
3
2
1
Modular
EthernetSwitches
Unmanaged
EthernetSwitches
Rackmount
EthernetSwitches
Managed
EthernetSwitches
VideoNetworkingProducts
Ethernet network adaptor
NA-4010Modular Remote I/O
NA-4010
0 1
2 3
4 5
6 7
CH0 CH0
CH0 CH0
CH0 CH0
CH0 CH0
ioLogik 4000Modbus TCP/IPNA-4010
SYSLINKACTIVEI/O
FieldPower
0 1
2 3
4 5
6 7
SG
Field Power (0 VDC)Field Power (24 VDC)
SG
24V 0V
0V 0V
24V 24V
System Power (0 VDC)
System Power (24 VDC)
Field Power (0 VDC)
Field Power (24 VDC)
Shielding Ground
System Power (5 VDC)System Power (GND)
System Bus
Non-isolationSwitchingPower
Specifications
NetworkEthernet: 10/100 Mbps, RJ45
Software Features Protocols: Modbus/TCP, HTTP, BootpIP Settings: ARP, Bootp, static IPUtility: ioAdminProgramming Library: MXIO DLL library for Windows supporting Visual Basic, Visual C++, Borland C++ BuilderNumber of I/O Modules support: Max. of 32 I/O expansion modules
Power Requirements Power Input: 11 to 28.8 VDC, 24 VDC typicalPower Consumption: 60 mA typical @ 24 VDCCurrent for I/O Modules: Max. 1.5A @ 5 VDC
Field Power Rated Voltage: 11 to 28.8 VDC, 24 VDC typicalCurrent in Field Power Contact: Max. 10A
IsolationSystem Power to I/O Driver: Optical isolation
Environmental LimitsOperating Temperature: -20 to 60°C, 5 to 90%RHStorage Temperature: -45 to 85°CVibration: IEC-68-2-6, 2G in operation
Physical CharacteristicsDimensions (W x H x D): 42 x 99 x 70 mm (1.65 x 3.9 x 2.75 in.) Weight: 150 g
Regulatory ApprovalsSafety: UL508EMC: CE IEC 61000-6-2, IEC 61000-6-4
Ordering Information
NA-4000 series M-1000/2000/3000/4000/6000 series M-7000 series
Step 1: Select a network adaptor module Step 2: Select I/O modules Step 3: Select power modules (optional)
NA-4010: Ethernet network adaptor (Modbus/TCP)
*The NA-4010 Ethernet network adaptor is expandable with up to 32 I/O modules. Please refer to Page 8-9 to 8-19 to select the M- series modules that you need for your own application.
www.moxa.com emai l : [email protected] 8-8
Industrial Ethernet Solutions for Control and Automation
8
Modular Rem
ote I/O
RS-485 or RS-232 network adaptors
NA-4020/4021
SpecificationsSerial CommunicationBaudrate: 1200 to 115200 bpsData Bits: 7, 8Parity Bits: None, Even, OddStop Bits: 1, 2Signal: NA-4020: Data+, Data-, Gnd, DIR NA-4021: TxD, RxD, Gnd
Software FeaturesProtocols: Modbus/RTU, Modbus/ASCIIModbus Address: 00 to 99 by rotary switchesUtility: ioAdminProgramming Library: MXIO DLL library for Windows supporting Visual Basic, Visual C++, Borland C++ BuilderNumber of I/O Modules support: Max. of 32 I/O expansion modules
Power RequirementsPower Input: 11 to 28.8 VDC, 24 VDC typicalPower Consumption: 70 mA typical @ 24 VDC
Current for I/O Modules: Max. 1.5A @ 5 VDC
Field PowerRated Voltage: 11 to 28.8 VDC, 24 VDC typicalCurrent in Field Power Contact: Max. 10A
IsolationSystem Power to I/O Driver: Optical isolation
Environmental LimitsOperating Temperature: -20 to 60°C, 5 to 90%RHStorage Temperature: -45 to 85°CVibration: IEC-68-2-6, 2G in operation
Physical Characteristics Dimensions (W x H x D): 42 x 99 x 70 mm (1.65 x 3.9 x 2.75 in.) Weight: 150 g
Regulatory ApprovalsSafety: UL508EMC: CE IEC 61000-6-2, IEC 61000-6-4
Ordering Information
0 1
2 3
4 5
6 7
CH0
CH0
CH0 CH0
ioLogik 4000Modbus RS-485NA-4020
SYSTxDRxDI/O
FieldPower
0 1
2 3
4 5
6 7
SG
Field Power (0 VDC)Field Power (24 VDC)
SG
24V 0V
0V 0V
24V 24V
System Power (0 VDC)
System Power (24 VDC)
Field Power (0 VDC)
Field Power (24 VDC)
Shielding Ground
System Power (5 VDC)System Power (GND)
System Bus
Non-isolationSwitchingPower
NA-4000 series M-1000/2000/3000/4000/6000 series M-7000 series
Step 1: Select a network adaptor module Step 2: Select I/O modules Step 3: Select power modules (optional)
NA-4020: RS-485 network adaptor (Modbus)NA-4021: RS-232 network adaptor (Modbus)*The NA-4020/4021 RS-485/RS-232 adaptors are expandable with up to 32 I/O modules. Please refer to Page 8-9 to 8-19 to select the M- series modules that you need for
your own application.
NA-4020/4021
emai l : [email protected] www.moxa.com 8-9
0
8
7
OverviewM
odular Remote I/O
Peer-to-PeerI/O
9
10
12
Media
ConvertersAccessories
Ordering Inform
ation
11
6
Active Ethernet I/O
5
Wireless
Ethernet
4
3
2
1
Modular
EthernetSwitches
Unmanaged
EthernetSwitches
Rackmount
EthernetSwitches
Managed
EthernetSwitches
VideoNetworkingProducts
M-1800 8 digital inputs, sink, 24 VDCInputs per Module: 8 channels, sink typeOn-state Voltage: 24 VDC nominal, min. 11 VDC to max. 28.8 VDCMin. Off-state Voltage: Max. 5 VDCOn-state Current: Max. 6 mA/point @ 28.8 VDCInput Impedance: Typ. 5.1K ohmsFiltering Time: Typ. 1.5 msCommon Type: External commonPower Consumption: Max. 35 mA @ 5 VDC
M-1401 4 digital inputs, source, 24 VDCInputs per Module: 4 channels, source typeOn-state Voltage: 24 VDC nominal, min. 11 VDC to max. 28.8 VDCMin. Off-state Voltage: Max. 5 VDCOn-state Current: Max. 6 mA/point @ 28.8 VDCInput Impedance: Typ. 5.1K ohmsFiltering Time: Typ. 1.5 msCommon Type: 4 channels/2 COMPower Consumption: Max. 35 mA @ 5 VDC
0 1
2 3
4 5
6 7
CH0 CH1
CH2 CH3
0V 0V
24V 24V
0 1
2 3
System Power (5 VDC)System Power (GND)
System Bus
Field Power (0 VDC)Field Power (24 VDC)
M-1400
Status
0
1
23
M-1400 4 digital inputs, sink, 24 VDCInputs per Module: 4 channels, sink typeOn-state Voltage: 24 VDC nominal, min. 11 VDC to max. 28.8 VDCMin. Off-state Voltage: Max. 5 VDCOn-state Current: Max. 6 mA/point @ 28.8 VDCInput Impedance: Typ. 5.1K ohmsFiltering Time: Typ. 1.5 msCommon Type: 4 channels/2 COMPower Consumption: Max. 35 mA @ 5 VDC
0 1
2 3
4 5
6 7
CH0 CH1
CH2 CH3
0V 0V
24V 24V
0 1
2 3
System Power (5 VDC)System Power (GND)
System Bus
Field Power (0 VDC)Field Power (24 VDC)
M-1401
Status
0
1
23
0 1
2 3
4 5
6 7
CH0 CH1
CH2 CH3
CH4 CH5
CH6 CH7
0 1
2 3
System Power (5 VDC)System Power (GND)
System Bus
Field Power (0 VDC)Field Power (24 VDC)
Field Power (24 VDC)Field Power (0 VDC)
M-1800
Status
0
1
23
4
5
6
7
Digital Input Modules4- or 8-channel 24 VDC digital input modules
M-1801 8 digital inputs, source, 24 VDCInputs per Module: 8 channels, source typeOn-state Voltage: 24 VDC nominal, min. 11 VDC to max. 28.8 VDCMin. Off-state Voltage: Max. 5 VDCOn-state Current: Max. 6 mA/point @ 28.8 VDCInput Impedance: Typ. 5.1K ohmsFiltering Time: Typ 1.5 msCommon Type: External commonPower Consumption: Max. 35 mA @ 5 VDC
0 1
2 3
4 5
6 7
CH0 CH1
CH2 CH3
CH4 CH5
CH6 CH7
0 1
2 3
System Power (5 VDC)System Power (GND)
System Bus
Field Power (0 VDC)Field Power (24 VDC)
Field Power (24 VDC)Field Power (0 VDC)
M-1801
Status
0
1
23
4
5
6
7
Digital Input ModulesModular Remote I/O
www.moxa.com emai l : [email protected] 8-10
Industrial Ethernet Solutions for Control and Automation
8
Modular Rem
ote I/O
M-1411 4 digital inputs, source, 48 VDCInputs per Module: 4 channels, source typeOn-state Voltage: 48 VDC nominal, min. 34 VDC to max. 60 VDCMin. Off-state Voltage: Max. 10 VDCOn-state Current: Max. 4 mA/point @ 48 VDCInput Impedance: Typ. 12K ohmsCommon Type: 4 channels/2 COMPower Consumption: Max. 35 mA @ 5 VDC
M-1410 4 digital inputs, sink, 48 VDCInputs per Module: 4 channels, sink typeOn-state Voltage: 48 VDC nominal, min. 34 VDC to max. 60 VDCMin. Off-state Voltage: Max. 10 VDCOn-state Current: Max. 4 mA/point @ 48 VDCInput Impedance: Typ. 12K ohmsCommon Type: 4 channels/2 COMPower Consumption: Max. 35 mA @ 5 VDC
16-channel 24 VDC digital input modules
0 1
2 3
4 5
6 7
CH0 CH1
CH2 CH3
0V 0V
48V 48V
0 1
2 3
System Power (5 VDC)System Power (GND)
System Bus
Field Power (0 VDC)Field Power (48 VDC)
* Field Power distributor required.
M-1410
Status
0
1
23
0 1
2 3
4 5
6 7
CH0 CH1
CH2 CH3
0V 0V
48V 48V
0 1
2 3
System Power (5 VDC)System Power (GND)
System Bus
Field Power (0 VDC)Field Power (48 VDC)
* Field Power distributor required.
M-1411
Status
0
1
23
M-1600 16 digital inputs, sink, 24 VDC Inputs per Module: 16 channels, sink typeOn-state Voltage: 24 VDC nominal, min. 11 VDC to max. 28.8 VDCMin. Off-state Voltage: Max. 5 VDCOn-state Current: Max. 6 mA/point @ 28.8 VDCInput Impedance: Typ. 5.1K ohmsFiltering Time: Typ. 1.5 msCommon Type: 16 channels/2 COM Power Consumption: Max. 40 mA @ 5 VDC
M-1601 16 digital inputs, source, 24 VDCInputs per Module: 16 channels, source typeOn-state Voltage: 24 VDC nominal, min. 11 VDC to max. 28.8 VDCMin. Off-state Voltage: Max. 5 VDCOn-state Current: Max. 6 mA/point @ 28.8 VDCInput Impedance: Typ. 5.1K ohmsFiltering Time: Typ. 1.5 msCommon Type: 16 channels/2 COM Power Consumption: Max. 40 mA @ 5 VDC
24V24V
0V0V
1514
1312
1110
98
76
54
32
1Ch0
0 1
18 19
System Power (5 VDC)System Power (GND)
System Bus
Field Power (0 VDC)Field Power (24 VDC)
M-1600
Status
3 71115
2 61014
1 5 9 13
0 4 8 12
24V24V
0V0V
1514
1312
1110
98
76
54
32
1Ch0
0 1
18 19
System Power (5 VDC)System Power (GND)
System Bus
Field Power (0 VDC)Field Power (24 VDC)
M-1601
Status
3 71115
2 61014
1 5 9 13
0 4 8 12
4-channel 48 VDC digital input modules
Digital Input M
odules
emai l : [email protected] www.moxa.com 8-11
0
8
7
OverviewM
odular Remote I/O
Peer-to-PeerI/O
9
10
12
Media
ConvertersAccessories
Ordering Inform
ation
11
6
Active Ethernet I/O
5
Wireless
Ethernet
4
3
2
1
Modular
EthernetSwitches
Unmanaged
EthernetSwitches
Rackmount
EthernetSwitches
Managed
EthernetSwitches
VideoNetworkingProducts
4-channel 110/220 VAC digital input modules
M-1451 4 digital inputs, 220 VACInputs per Module: 4 channelsOn-state Voltage: 240 VAC nominal, min. 170 VAC to max. 264 VACMin. Off-state Voltage: Max. 45 VACOn-state Current: Max. 12 mA/point @ 264 VACInput Impedance: Typ. 22K ohmsCommon Type: 4 channels/2 COM (single common)Power Consumption: Max. 35 mA @ 5 VDC
M-1450 4 digital inputs, 110 VACInputs per Module: 4 channelsOn-state Voltage: 120 VAC nominal, min. 85 VAC to max. 132 VACMin. Off-state Voltage: Max. 45 VACOn-state Current: Max. 8 mA/point @ 132 VACInput Impedance: Typ. 11K ohmsCommon Type: 4 channels/2 COM (single common)Power Consumption: Max. 35 mA @ 5 VDC
0 1
2 3
4 5
6 7
CH0 CH1
CH2 CH3
N N
L L
0 1
2 3
System Power (5 VDC)System Power (GND)
System Bus
Field Power (110 VAC N)Field Power (110 VAC L)
* Field Power distributor required.
M-1450
Status
0
1
23
0 1
2 3
4 5
6 7
CH0 CH1
CH2 CH3
N N
L L
0 1
2 3
System Power (5 VDC)System Power (GND)
System Bus
Field Power (220 VAC N)Field Power (220 VAC L)
* Field Power distributor required.
Field Power (220 VAC)
M-1451
Status
0
1
23
Ordering Information
Digital Input Modules
Specs
Model M-1400 M-1401 M-1410 M-1411 M-1800 M-1801 M-1600 M-1601 M-1450 M-1451
Channels 4 4 4 4 8 8 16 16 4 4
Sink/Source Sink Source Sink Source Sink Source Sink Source – –
Connector RTB RTB RTB RTB RTB RTB 20-pin 20-pin RTB RTB
Voltage 24 VDC 24 VDC 48 VDC 48 VDC 24 VDC 24 VDC 24 VDC 24 VDC 110 VAC 220 VAC
Isolation Optical isolation
Digital Input ModulesModular Remote I/O
www.moxa.com emai l : [email protected] 8-12
Industrial Ethernet Solutions for Control and Automation
8
Modular Rem
ote I/O
M-2400 4 digital outputs, sink, 24 VDC, 0.5AOutputs per Module: 4 channels, sink typeOutput Voltage Range: 24 VDC nominal, min. 11 VDC to max. 28.8 VDCOn-state Voltage Drop: Max. 0.3 VDC @ 25°COn-state Current: Min. 1 mA per channelOff Leakage Current: Max. 50 µAOutput Current Rating: Max. 0.5A per channel Common Type: 4 channels/4 COM (single common)Power Consumption: Max. 45 mA @ 5 VDC
Digital Output Modules
4- or 8-channel 24 VDC digital output modules
System Power (5 VDC)System Power (GND)
System Bus
Field Power (0 VDC)Field Power (24 VDC)
L
L
0 1
2 3
4 5
6 7
CH0 CH1
CH2 CH3
24V
24V 24V
0 1
2 3
24V
M-2400
Status
0
1
23
0 1
2 3
4 5
6 7
CH0 CH1
CH2 CH3
0V 0V
0 1
2 3
System Power (5 VDC)System Power (GND)
System Bus
Field Power (0 VDC)Field Power (24 VDC)
L
L
0V 0V
M-2401
Status
0
1
23
M-2401 4 digital outputs, source, 24 VDC, 0.5AOutputs per Module: 4 channels, source typeOutput Voltage Range: 24 VDC nominal, min. 11 VDC to max. 28.8 VDCOn-state Voltage Drop: Max. 0.3 VDC @ 25°COn-state Current: Min. 1 mA per channelOff Leakage Current: Max. 50 µAOutput Current Rating: Max. 0.5A per channel Common Type: 4 channels/4 COM (single common)Power Consumption: Max. 45 mA @ 5 VDC
0 1
2 3
4 5
6 7
CH0 CH1
CH2 CH3
CH4 CH5
CH6 CH7
0 1
2 3
System Power (5 VDC)System Power (GND)
System Bus
Field Power (0 VDC)Field Power (24 VDC)
Field Power (24 VDC)Field Power (0 VDC)
L
L
L
L
M-2800
Status
0
1
23
4
5
6
7
M-2800 8 digital outputs, sink, 24 VDC, 0.5AOutputs per Module: 8 channels, sink typeOutput Voltage Range: 24 VDC nominal, min.11 VDC to max. 28.8 VDCOn-state Voltage Drop: Max. 0.3 VDC @ 25°COn-state Current: Min. 1 mA per channelOff Leakage Current: Max. 50 µAOutput Current Rating: Max. 0.5A per channel Common Type: 8 channels/external common (single common)Power Consumption: Max. 60 mA @ 5 VDC
0 1
2 3
4 5
6 7
CH0 CH1
CH2 CH3
CH4 CH5
CH6 CH7
0 1
2 3
System Power (5 VDC)System Power (GND)
System Bus
Field Power (0 VDC)Field Power (24 VDC)
Field Power (24 VDC)Field Power (0 VDC)
L
L
L
L
M-2801
Status
0
1
23
4
5
6
7
M-2801 8 digital outputs, source, 24 VDC, 0.5AOutputs per Module: 8 channels, source typeOutput Voltage Range: 24 VDC nominal, min. 11 VDC to max. 28.8 VDCOn-state Voltage Drop: Max. 0.3 VDC @ 25°COn-state Current: Min. 1 mA per channelOff Leakage Current: Max. 50 µAOutput Current Rating: Max. 0.5A per channel Common Type: 8 channels/external common (single common)Power Consumption: Max. 60 mA @ 5 VDC
Digital O
utput Modules
emai l : [email protected] www.moxa.com 8-13
0
8
7
OverviewM
odular Remote I/O
Peer-to-PeerI/O
9
10
12
Media
ConvertersAccessories
Ordering Inform
ation
11
6
Active Ethernet I/O
5
Wireless
Ethernet
4
3
2
1
Modular
EthernetSwitches
Unmanaged
EthernetSwitches
Rackmount
EthernetSwitches
Managed
EthernetSwitches
VideoNetworkingProducts
M-2403 4 digital outputs, diagnostics, source, 24 VDC, 0.5AOutputs per Module: 4 channels, source typeOutput Voltage Range: 24 VDC nominal, min. 11 VDC to max. 28.8 VDCOn-state Voltage Drop: Max. 0.3 VDC @ 25°COn-state Current: Min. 1 mA per channelOff Leakage Current: Max. 50 µAOutput Current Rating: Max. 0.5A per channel Common Type: 4 channels/4 COM (single common)Self Diagnostics: YesPower Consumption: Max. 45 mA @ 5 VDC
M-2402 4 digital outputs, diagnostics, sink, 24 VDC, 0.5AOutputs per Module: 4 channels, sink typeOutput Voltage Range: 24 VDC nominal, min. 11 VDC to max. 28.8 VDCOn-state Voltage Drop: Max. 0.3 VDC @ 25°COn-state Current: Min. 1 mA per channelOff Leakage Current: Max. 50 µAOutput Current Rating: Max. 0.5A per channel Common Type: 4 channels/4 COM (single common)Self Diagnostics: YesPower Consumption: Max. 45 mA @ 5 VDC
4-channel digital output modules with diagnostics
System Power (5 VDC)System Power (GND)
System Bus
Field Power (0 VDC)Field Power (24 VDC)
L
L
0 1
2 3
4 5
6 7
CH0 CH1
CH2 CH3
24V
24V 24V
0 1
2 3
24V
M-2402
Status
0
1
23
0 1
2 3
4 5
6 7
CH0 CH1
CH2 CH3
0V 0V
0 1
2 3
System Power (5 VDC)System Power (GND)
System Bus
Field Power (0 VDC)Field Power (24 VDC)
L
L
0V 0V
M-2403
Status
0
1
23
M-2405 4 digital outputs, diagnostics, source, 24 VDC, 2AOutputs per Module: 4 channels, source typeOutput Voltage Range: 24 VDC nominal, min. 11 VDC to max. 28.8 VDCOn-state Voltage Drop: Max. 0.3 VDC @ 25°COn-state Current: Min. 1 mA per channelOff Leakage Current: Max. 50 µAOutput Current Rating: Max. 2A per channel Common Type: 4 channels/4 COM (single common)Self Diagnostics: YesPower Consumption: Max. 45 mA @ 5 VDC
M-2404 4 digital outputs, diagnostics, sink, 24 VDC, 2AOutputs per Module: 4 channels, sink typeOutput Voltage Range: 24 VDC nominal, min. 11 VDC to max. 28.8 VDCOn-state Voltage Drop: Max. 0.3 VDC @ 25°COn-state Current: Min. 1 mA per channelOff Leakage Current: Max. 50 µAOutput Current Rating: Max. 2A per channel Common Type: 4 channels/4 COM (single common)Self Diagnostics: YesPower Consumption: Max. 45 mA @ 5 VDC
System Power (5 VDC)System Power (GND)
System Bus
Field Power (0 VDC)Field Power (24 VDC)
L
L
0 1
2 3
4 5
6 7
CH0 CH1
CH2 CH3
24V
24V 24V
0 1
2 3
24V
M-2404
Status
0
1
23
0 1
2 3
4 5
6 7
CH0 CH1
CH2 CH3
0V 0V
0 1
2 3
System Power (5 VDC)System Power (GND)
System Bus
Field Power (0 VDC)Field Power (24 VDC)
L
L
0V 0V
M-2405
Status
0
1
23
Digital Output ModulesModular Remote I/O
www.moxa.com emai l : [email protected] 8-14
Industrial Ethernet Solutions for Control and Automation
8
Modular Rem
ote I/O
M-2600 16 digital outputs, sink, 24 VDC, 0.3AOutputs per Module: 16 channels, sink typeOutput Voltage Range: 24 VDC nominal, min. 11 VDC to max. 28.8 VDCOn-state Voltage Drop: Max. 0.3 VDC @ 25°COn-state Current: Min. 1 mA per channelOff Leakage Current: Max. 50 µAOutput Current Rating: Max. 0.3A per channel
Max. 4A per commonCommon Type: 16 channels/2 COM (single common)Power Consumption: Max. 80 mA @ 5 VDC
16-channel digital output modules
24V24V
0V0V
1514
1312
1110
98
76
54
32
1Ch0
0 1
18 19
System Power (5 VDC)System Power (GND)
System Bus
Field Power (0 VDC)Field Power (24 VDC)
L
L
LLLLLL
M-2600
Status
3 71115
2 61014
1 5 9 13
0 4 8 12
24V24V
0V0V
1514
1312
1110
98
76
54
32
1Ch0
0 1
18 19
System Power (5 VDC) System Power (GND)
System Bus
Field Power (0 VDC) Field Power (24 VDC)
L
L
LLLLLL
M-2601
Status
7111561014
1 5 9 13
0 4 8 12
M-2601 16 digital outputs, source, 24 VDC, 0.3AOutputs per Module: 16 channels, source typeOutput Voltage Range: 24 VDC nominal, min. 11 VDC to max. 28.8 VDCOn-state Voltage Drop: Max. 0.3 VDC @ 25°COn-state Current: Min. 1 mA per channelOff Leakage Current: Max. 50 µAOutput Current Rating: Max. 0.3A per channel
Max. 4A per commonCommon Type: 16 channels/2 COM (single common)Power Consumption: Max. 80 mA @ 5 VDC
Digital O
utput Modules
emai l : [email protected] www.moxa.com 8-15
0
8
7
OverviewM
odular Remote I/O
Peer-to-PeerI/O
9
10
12
Media
ConvertersAccessories
Ordering Inform
ation
11
6
Active Ethernet I/O
5
Wireless
Ethernet
4
3
2
1
Modular
EthernetSwitches
Unmanaged
EthernetSwitches
Rackmount
EthernetSwitches
Managed
EthernetSwitches
VideoNetworkingProducts
0 1
2 3
4 5
6 7
CH0 CH1
Ch0 Ch1
L1 L1
L2 L2
0 1
2 3
System Power (5 VDC)System Power (GND)
System Bus
Field Power (N or 0 VDC)Field Power (230 VAC or 24 VDC)
* Field Power distributor required when the field power is not 24 VDC.
L
L
COM(to N or 0 VDC)
M-2250
Status
0
1
0 1
2 3
4 5
6 7
CH0 CH1
NC NC
N N
L L
0 1
2 3
System Power (5 VDC)System Power (GND)
System Bus
Field Power (110 VAC N)Field Power (110 VAC L)
* Field Power distributor required when the field power is not 24 VDC.
L
L
to 125 VAC
M-2254
Status
0
1
NC: No Connection
2-channel relay output modules
M-2254 2 digital outputs, triac, 12 to 125 VAC, 0.5AOutputs per Module: 2 channelsSwitch Type: Zero crossingRated Load Voltage: 15 to 132 VACOutput Current Rating: 0.05 to 0.5AFrequency Range: 47 to 63 HzSurge Current: 40A (16 ms)/4A (30S)On-state Voltage Drop: 1.3 Vrms (max. load)Off-state Leakage Current: Max. 1.5 mACommon Type: 2 channels/2 COMPower Consumption: Max. 35 mA @ 5 VDC
M-2250 2 digital outputs, relay, 24 VDC/230 VAC, 2AOutputs per Module: 2 channels, relay Relay Type: Form A, Normally Open (N.O.) Single Pole, Single Throw (SPST)Output Voltage Range: Load dependent 5 to 28.8 VDC @ 2A resistive 48 VDC @ 0.8A resistive 110 VAC @ 0.3A resistive 250 VAC @ 2A resistiveOutput Current Rating: At rated power 2A @ 5 to 28.8 VDC 0.8A @ 48 VDC 0.5A @ 110 VAC 2A @ 250 VACMin. Load: 100 µA, 100 m VDC per pointMax. On-state Voltage Drop: 0.5V @ 2A, resistive load, 24 VDCOff-state Leakage Current: Max. 1.5 mACommon Type: 1 channel/1 COMPower Consumption: Max. 65 mA @ 5 VDC
Ordering Information
Digital Output Modules
Specs
Model M-2400 M-2401 M-2800 M-2801 M-2600 M-2601 M-2402 M-2403 M-2404 M-2405 M-2250 M-2254
Channels 4 4 8 8 16 16 4 4 4 4 2 2
Sink/Source Sink Source Sink Source Sink Source Sink Source Sink Source Relay Triac
Connector RTB RTB RTB RTB 20-pin 20-pin RTB RTB RTB RTB RTB RTB
Voltage 24 VDC 24 VDC 24 VDC 24 VDC 24 VDC 24 VDC 24 VDC 24 VDC 24 VDC 24 VDC 230 VAC/ 24 VDC
12 to 125 VAC
Current 0.5A 0.5A 0.5A 0.5A 0.3A 0.3A 0.5A 0.5A 2.0A 2.0A 2.0A 0.5A
Isolation Optical isolation
Diagnostics – – – – – – Yes Yes Yes Yes – –
Digital Output ModulesModular Remote I/O
www.moxa.com emai l : [email protected] 8-16
Industrial Ethernet Solutions for Control and Automation
8
Modular Rem
ote I/O
M-3410 4 analog inputs, 0 to 10V, 12-bitM-3412 4 analog inputs, -10 to 10V, 12-bitM-3414 4 analog inputs, 0 to 5V, 12-bitInput SpecificationsResolution in Ranges: 12-bit, 2.44 mV/bit (M-3410) 12-bit, 4.88 mV/bit (M-3412) 12-bit, 1.22 mV/bit (M-3414)Input Current Range: 0 to 10 VDC (M-3410) -10 to 10 VDC (M-3412) 0 to 5 VDC (M-3414)Data Format: 16-bit integer (2’s complement)Accuracy: +/- 0.1%, FSR @ 25°C +/- 0.3%, FSR @ 0°C, 60°CInput Impedance: 500K ohmsConversion Time: 4 ms/all channels
General SpecificationsPower Consumption: Max. 150 mA @ 5 VDCIsolation: I/O to logic: Photocoupler isolationWiring: I/O cable max. AWG14
M-3400 4 analog inputs, 0 to 20 mA, 12-bitM-3402 4 analog inputs, 4 to 20 mA, 12-bitInput SpecificationsResolution in Ranges: 12-bit, 4.88 µA/bit (M-3400) 12-bit, 3.91 µA/bit (M-3402)Input Current Range: 0 to 20 mA (M-3400) 4 to 20 mA (M-3402)Data Format: 16-bit integer (2’s complement)Accuracy: +/- 0.1%, FSR @ 25°C +/- 0.3%, FSR @ 0°C, 60°CInput Impedance: 120 ohmsConversion Time: 4 ms/all channels
General SpecificationsPower Consumption: Max. 150 mA @ 5 VDCIsolation: I/O to logic: Photocoupler isolationWiring: I/O cable max. AWG14
Analog Input Modules4-channel analog input modules, 12-bit resolution
System Power (5 VDC) System Power (GND)
System Bus
Field Power (0 VDC) Field Power (24 VDC)
0 1
2 3
4 5
6 7
CH0 CH1
CH2 CH3
G
CG CG
0 1
2 3
G
Voltage 0 to 10V (M-3410/3411)Voltage -10 to 10V (M-3412/3413)Voltage 0 to 5V (M-3414/3415)
Shielding Ground
M-34xx
Status
0
1
23
System Power (5 VDC)System Power (GND)
System Bus
Field Power (0 VDC)Field Power (24 VDC)
0 1
2 3
4 5
6 7
CH0 CH1
CH2 CH3
G
CG CG
0 1
2 3
G
Current 0 to 20mA (M-3400/3401)
Shielding Ground
Current 4 to 20mA (M-3402/3403)
M-34xx
Status
0
1
23
Analog Input Modules
emai l : [email protected] www.moxa.com 8-17
0
8
7
OverviewM
odular Remote I/O
Peer-to-PeerI/O
9
10
12
Media
ConvertersAccessories
Ordering Inform
ation
11
6
Active Ethernet I/O
5
Wireless
Ethernet
4
3
2
1
Modular
EthernetSwitches
Unmanaged
EthernetSwitches
Rackmount
EthernetSwitches
Managed
EthernetSwitches
VideoNetworkingProducts
M-3411 4 analog inputs, 0 to 10V, 14-bitM-3413 4 analog inputs, -10 to 10V, 14-bitM-3415 4 analog inputs, 0 to 5V, 14-bitInput SpecificationsResolution in Ranges: 14-bit, 0.61 mV/bit (M-3411) 14-bit, 1.22 mV/bit (M-3413) 14-bit, 0.31 mV/bit (M-3415)Input Current Range: 0 to 10 VDC (M-3411) -10 to 10 VDC (M-3413) 0 to 5 VDC (M-3415)Data Format: 16-bit integer (2’s complement)Accuracy: +/- 0.1%, FSR @ 25°C +/- 0.3%, FSR @ 0°C, 60°CInput Impedance: 500K ohmsConversion Time: 4 ms/all channels
General SpecificationsPower Consumption: Max. 150 mA @ 5 VDCIsolation: I/O to logic: Photocoupler isolationWiring: I/O cable max. AWG14
M-3401 4 analog inputs, 0 to 20 mA, 14-bitM-3403 4 analog inputs, 4 to 20 mA, 14-bitInput SpecificationsResolution in Ranges: 14-bit, 1.22 µA/bit (M-3401) 14-bit, 0.98 µA/bit (M-3403)Input Current Range: 0 to 20 mA (M-3401) 4 to 20 mA (M-3403)Data Format: 16-bit integer (2’s complement)Accuracy: +/- 0.1%, FSR @ 25°C +/- 0.3%, FSR @ 0°C, 60°CInput Impedance: 120 ohmsConversion Time: 4 ms/all channels
General SpecificationsPower Consumption: Max. 150 mA @ 5 VDCIsolation: I/O to logic: Photocoupler isolationWiring: I/O cable max. AWG14
4-channel analog input modules, 14-bit resolution
System Power (5 VDC) System Power (GND)
System Bus
Field Power (0 VDC) Field Power (24 VDC)
0 1
2 3
4 5
6 7
CH0 CH1
CH2 CH3
G
CG CG
0 1
2 3
G
Voltage 0 to 10V (M-3410/3411)Voltage -10 to 10V (M-3412/3413)Voltage 0 to 5V (M-3414/3415)
Shielding Ground
M-34xx
Status
0
1
23
System Power (5 VDC)System Power (GND)
System Bus
Field Power (0 VDC)Field Power (24 VDC)
0 1
2 3
4 5
6 7
CH0 CH1
CH2 CH3
G
CG CG
0 1
2 3
G
Current 0 to 20mA (M-3400/3401)
Shielding Ground
Current 4 to 20mA (M-3402/3403)
M-34xx
Status
0
1
23
Analog Input ModulesModular Remote I/O
www.moxa.com emai l : [email protected] 8-18
Industrial Ethernet Solutions for Control and Automation
8
Modular Rem
ote I/O
Temperature Input Modules
2-channel temperature input modules, RTD or thermocouple input
M-6200 2 analog inputs, RTD: PT100, JPT100Input SpecificationsSensor Types: PT50, PT100, PT200, PT500, PT1000, JPT100, JPT200, JPT500, JPT1000, NI100, NI200, NI500, NI1000, NI120, CU10, Resistance 100 milli-ohm/bit, Resistance 10 milli-ohm/bit, Resistance 20 milli-ohm/bitData Format: 16-bit integer (2’s complement)Resolution: 0.1°C/10 milli-ohmAccuracy: +/- 0.1%, FSR @ 25°C +/- 0.3%, FSR @ 0°C, 60°CInput Impedance: 500K ohmsConversion Time: 200 ms/all channelsDiagnostics: Range over (if range over, data=Dx8000)
General SpecificationsPower Consumption: Max. 80 mA @ 5 VDCIsolation: I/O to logic: Photocoupler isolationWiring: I/O cable max. AWG14
System Power (5 VDC)System Power (GND)
System Bus
Field Power (0 VDC)Field Power (24 VDC)
0 1
2 3
4 5
6 7
CH0 CH1
CH0 CH1
G
CG CG
0 1
2 3
G
RTD
Shielding Ground
CH1-A
CH1-B
M-6200
Status
0
1
M-6201 2 analog inputs, thermocoupleInput SpecificationsSensor Types: Type J/K/T/E/R/S/B/N/L/U/C/D mV input 10 µV/bit, 2 µV/bitData Format: 16-bit integer (2’s compliment)Resolution: 0.1°C/10µVAccuracy: +/- 0.1%, FSR @ 25°C +/- 0.3%, FSR @ 0°C, 60°CInput Impedance: 500K ohmsConversion time: 200 ms/all channelsDiagnostics: Range over (if range over, data=Dx8000)
General SpecificationsPower Consumption: Max. 80 mA @ 5 VDCIsolation: I/O to logic: Photocoupler isolationWiring: I/O cable max. AWG14
System Power (5 VDC)System Power (GND)
System Bus
Field Power (0 VDC)Field Power (24 VDC)
0 1
2 3
4 5
6 7
CH0 CH1
CH0 CH1
G
CG CG
0 1
2 3
G
Voltage 0 to 10V
Shielding Ground
CH1+
CH1-
Thermocouple
M-6201
Status
0
1
Ordering Information
Temperature Input M
odules
Analog Input Modules
Specs
Model M-3400 M-3402 M-3410 M-3412 M-3414 M-3401 M-3403 M-3411 M-3413 M-3415 M-6200 M-6201
Channels 4 4 4 4 4 4 4 4 4 4 2 2
Current 0 to 20 mA 4 to 20 mA – – – 0 to 20 mA 4 to 20 mA – – – – –
Voltage – – 0 to 10V -10 to 10V 0 to 5V – – 0 to 10V -10 to 10V 0 to 5V – –
Connector RTB RTB RTB RTB RTB RTB RTB RTB RTB RTB RTB RTB
Resolution 12-bit 12-bit 12-bit 12-bit 12-bit 14-bit 14-bit 14-bit 14-bit 14-bit – –
Isolation Optical isolation
Sensor Input – – – – – – – – – – RTD
(ohm)
Thermo- couple(mV)
emai l : [email protected] www.moxa.com 8-19
0
8
7
OverviewM
odular Remote I/O
Peer-to-PeerI/O
9
10
12
Media
ConvertersAccessories
Ordering Inform
ation
11
6
Active Ethernet I/O
5
Wireless
Ethernet
4
3
2
1
Modular
EthernetSwitches
Unmanaged
EthernetSwitches
Rackmount
EthernetSwitches
Managed
EthernetSwitches
VideoNetworkingProducts
System Power (5 VDC) System Power (GND)
System Bus
Field Power (0 VDC) Field Power (24 VDC)
0 1
2 3
4 5
6 7
CH0 CH1
NC NC
G
CG CG
0 1
2 3
G
Voltage 0 to 10V (M-4210) Voltage -10 to 10V (M-4211) Voltage 0 to 5V (M-4212)
Shielding Ground
R > 5K ohms
M-421x
Status
0
1
System Power (5 VDC)System Power (GND)
System Bus
Field Power (0 VDC)Field Power (24 VDC)
0 1
2 3
4 5
6 7
CH0 CH1
NC NC
G
CG CG
0 1
2 3
G
Current 0 to 20mA (M-4201)Current 4 to 20mA (M-4202)
Shielding Ground
R<500 ohms
M-420x
Status
0
1
M-4210 2 analog outputs, 0 to 10V, 12-bitM-4211 2 analog outputs, -10 to 10V, 12-bitM-4212 2 analog outputs, 0 to 5V, 12-bitOutput SpecificationsResolution in Ranges: 12-bit, 2.44 mV/bit (M-4210) 12-bit, 4.88 mV/bit (M-4211) 12-bit, 1.22 mV/bit (M-4212)Output Current Range: 0 to 10 VDC (M-4210) -10 to 10 VDC (M-4211) 0 to 5 VDC (M-4212)Data Format: 16-bit integer (2’s complement)Accuracy: +/- 0.1%, FSR @ 25°C +/- 0.3%, FSR @ 0°C, 60°COutput Impedance: Min. 5K ohmsConversion Time: 2 ms/all channelPower Consumption: Max. 200 mA @ 5 VDCIsolation: I/O to logic: Photocoupler isolationWiring: I/O cable max. AWG14
M-4201 2 analog outputs, 0 to 20 mA, 12-bitM-4202 2 analog outputs, 4 to 20 mA, 12-bitOutput SpecificationsResolution in Ranges: 12-bit, 4.88 µA/bit (M-4201) 12-bit, 3.91 µA/bit (M-4202)Output Current Range: 0 to 20 mA (M-4201) 4 to 20 mA (M-4202)Data Format: 16-bit integer (2’s complement)Accuracy: +/- 0.1%, FSR @ 25°C +/- 0.3%, FSR @ 0°C, 60°COutput Impedance: Max. 500 ohmsConversion Time: 2 ms/all channelsPower Consumption: Max. 65 mA @ 5 VDCIsolation: I/O to logic: Photocoupler isolationWiring: I/O cable max. AWG14
Analog Output Modules
2-channel analog output modules, 12-bit resolution
Ordering Information
Analog Output Modules
Specs
Model M-4201 M-4202 M-4210 M-4211 M-4212
Channels 2 2 2 2 2
Current 0 to 20 mA 4 to 20 mA – – –
Voltage – – 0 to 10V -10 to 10V 0 to 5V
Connector RTB RTB RTB RTB RTB
Resolution 12-bit 12-bit 12-bit 12-bit 12-bit
Isolation Optical isolation
Analog Output ModulesModular Remote I/O
www.moxa.com emai l : [email protected] 8-20
Industrial Ethernet Solutions for Control and Automation
8
Modular Rem
ote I/O
...................
150 mA150 mA
150 mA150 mA
150 mA150 mA
150 mA150 mA
200 mA Supports 1000 mA200 mA
200 mA200 mA
200 mA
Total: 1400 mA Total: 1000 mA
200 mASupports 1000 mA
Supports 1000 mA
0V 24V
24 VDC
0V 48V
48 VDC
0V110 VAC
110 VAC
...................
8-ch , 0 VDC
M-1801 M-7804 M-1800 M-7805
8-ch , 24 VDC
Power ModulesWhen to Use a Power Module
The system power expansion module is designed to provide extra power for connected I/O expansion modules. Each NA-4000 series network adaptor can provide 1.4A @ 5 VDC. If you require more
power for your installed I/O expansion modules, you will need to use an M-7001 module. However, please note that the M-7001 can only provide 1A @ 5 VDC.
The field power distributor is designed to isolate different field voltages. For example, before you connect a 48 VDC or 110 VAC DI/O
module to a 24 VDC DI/O module, you will need an M-7002 field power distributor.
There are three types of potential distributor modules that provide extra wiring points, such as shielding ground, 0V field power, and 24V field power. For example, the 8-channel digital input (sink type) module
by itself does not have a 24V wiring point. You may add an M-7805 for easier wiring.
Power M
odules
System Power Distributor
Field Power Distributor
Potential Power Distributor
M-7001
M-7002 M-7002
emai l : [email protected] www.moxa.com 8-21
0
8
7
OverviewM
odular Remote I/O
Peer-to-PeerI/O
9
10
12
Media
ConvertersAccessories
Ordering Inform
ation
11
6
Active Ethernet I/O
5
Wireless
Ethernet
4
3
2
1
Modular
EthernetSwitches
Unmanaged
EthernetSwitches
Rackmount
EthernetSwitches
Managed
EthernetSwitches
VideoNetworkingProducts
M-7001 System power module M-7002 Field power module
0 1
2 3
4 5
6 7
24V 0V
CG CG
0V 0V
24V 24V
0 1
2 3
System Power (5 VDC)System Power (GND)
System Bus
Field Power (0 VDC)Field Power (24 VDC)
Field Power Input (0 VDC)
Field Power Input (24 VDC)
System Power Input (24 VDC)
System Power Input (0 VDC)
Non-isolationSwitchingPower
Shield Ground
M-7001
0 1
2 3
4 5
6 7
CG CG
N N
P P
0 1
2 3
System Power (5 VDC)System Power (GND)
System Bus
Field Power (N)Field Power (P)
Shield Ground
Field Power Input (N)
Field Power Input (P)
*Field Power contact disconnected
*Field Power ranging from 24/48 VDC to 110/220 VAC
M-7002
System Input Voltage:• 24 VDC, 11 to 28.8 VDCField Power Input Voltage:• 24 VDC (+/- 20%)System Bus Output Voltage:• 5 VDC (Max.)Field Power Contacts Current:• 10A (Max.)
Field Power Input Voltage: • DC: 5 VDC, 24 VDC, 48 VDCAC: 110 VAC, 220 VACCurrent for Field Power Contacts:• 10A (Max.)
M-7803 Shield signal M-7804 0 VDC M-7805 24 VDC M-7806 24/0 VDC
0 1
2 3
4 5
6 7
CG CG
CG CG
CG CG
CG CG
0 1
2 3
System Power (5 VDC)System Power (GND)
System Bus
Field Power (N)Field Power (P)
M-7803
0 1
2 3
4 5
6 7
0V 0V
0V 0V
0V 0V
0V 0V
0 1
2 3
System Power (5 VDC)System Power (GND)
System Bus
Field Power (0 VDC)Field Power (24 VDC)
M-7804
0 1
2 3
4 5
6 7
24V 24V
24V 24V
24V 24V
24V 24V
0 1
2 3
System Power (5 VDC)System Power (GND)
System Bus
Field Power (0 VDC)Field Power (24 VDC)
M-7805
0 1
2 3
4 5
6 7
24V 0V
24V 0V
24V 0V
24V 0V
0 1
2 3
System Power (5 VDC)System Power (GND)
System Bus
Field Power (0 VDC)Field Power (24 VDC)
M-7806
Channels: 8Mode: Shield Signal
Channels: 8Mode: 0 VDC
Channels: 8Mode: 24 VDC
Channels: 4 for 24 VDC4 for 0 VDC
Mode: 24/0 VDC
Power Modules
Ordering Information
Power Modules
Specs
Model M-7001 M-7002 M-7803 M-7804 M-7805 M-7806
Channels 0 0 8 8 8 8
Voltage 24 VDC DC: 5, 24, 48 VDCAC: 110/220 VAC - 0 VDC 24 VDC 4-ch for 0 VDC
4-ch for 24 VDC
Purpose System Power Field Power Shield Signal Field Power Field Power Field Power
Power ModulesModular Remote I/O
www.moxa.com emai l : [email protected] 8-22
Industrial Ethernet Solutions for Control and Automation
8
Modular Rem
ote I/O
Accessories
Ordering Information
TB 1600 DIN-Rail mounting screw terminal module with 20-pin connector20 pins, one-to-one assignment• Connector pitch: 3.81 mm• DIN-Rail mounting type• Dimensions (W x L x H): 77.5 x 67.5 x 51 mm (3.05 x 2.66 x 2.01 in.)• RoHS compliant•
M-8001-PK Removable terminal blockTerminal block for ioLogik 4000 series• Packing: 9 pcs in one box•
M-8003-PK Marker with 0~9 numbering
M-8004-PK Blank markerMarker for ioLogik 4000 series• Packing: 100 pcs in one box•
20-to-20-pin flat cableConnecting between TB 1600 and ioLogik 4000 series• Length: 500 mm• Number of Pins: 20•
TB 1600:• DIN-Rail mounting screw terminal module with 20-pin connector20-to-20-pin flate cable:• 20-pin to 20-pin flat cable, 500 mmM-8001-PK:• Removable terminal block, 9 pcs per packM-8003-PK:• Marker with 0 to 9 numbering, white color, 100 pcsM-8004-PK:• Blank marker, 100 pcs
Accessories
Solution Tutorial 9-2
VPort 25 Fixed dome IP camera for outdoors 9-6
VPort 354 4-channel MJPEG/MPEG4 industrial video encoder 9-9
VPort 351 1-channel MJPEG/MPEG4 industrial video encoder 9-12
VPort 3310 1-channel MPEG4 industrial video server 9-15
VPort 251 1-channel MJPEG/MPEG4 video encoder 9-17
VPort 2141 4-channel MJPEG video server 9-19
VPort D351 1-channel MJPEG/MPEG4 industrial video decoder 9-21
SoftNVR Advanced video-over-IP surveillance software 9-23
SoftDVR™ Pro Video-over-IP surveillance software 9-24
VPort SDK User-friendly software development kit 9-26
Video Networking Products
9Video Networking Products
Industrial Ethernet Solutions for Control and Automation
www.moxa.com emai l : [email protected] 9-2
Industrial Ethernet Solutions for Control and Automation
9
Video Networking Products
Solution Tutorial
Industrial Video Networking SolutionsEmpower Your Video Network System with Industrial-grade Reliability
LED Display
Temperature Sensor
Traffic SignalsSmoke Detector
Gigabit Fiber Optic Cable (1000BaseSX/LX/LHX/ZX)Twisted Pair Cable (10/100BaseT(X))Coaxial CableSerial Cable (RS-232/422/485)I/O Signal
Gigabit Turbo Ring
VPort 351 1-ch IndustrialVideo Encoder
VPort D351 Industrial Video Decoder
VPort 354 4-ch IndustrialVideo Encoder
Gigabit Managed Ethernet Switch
EthernetI/O
I/O Monitor Video Surveillance Data Control
Control Center
SoftNVR/SoftDVR IP Surveillance Software
CCTV
VPort 354 4-ch IndustrialVideo Encoder
VPort 25 IP66 Fixed Dome IP Camera
Storage
Analog Camera
Server
EmbeddedComputer
Traffic Controller
DeviceServer
Analog Camera
emai l : [email protected] www.moxa.com 9-3
0
9
8
OverviewVideo Netw
orking Products
Modular
Remote I/O
10
12
Media
ConvertersAccessories
11
7
Peer-to-PeerI/O
6
Active Ethernet I/O
5
Wireless
Ethernet
4
3
2
1
Modular
EthernetSwitches
Unmanaged
EthernetSwitches
Rackmount
EthernetSwitches
Managed
EthernetSwitches
OrderingInform
ationSolution TutorialVideo Networking Products
Thanks to the ever-increasing popularity of IP networks, transmitting video, voice, and data simultaneously over Ethernet/Internet is becoming a standard feature at locations the world over. Because of this, CCTV surveillance systems are also becoming more commonplace. Versatile and advanced video digitizing and compression technologies, such as MJPEG and MPEGx, make it possible to migrate CCTV surveillance systems to IP-based platforms. This means that video-over-IP solutions, which include IP cameras, video servers, and NVRs (Network Video Recorders), are used by some of the hottest products in the CCTV surveillance market. However, most video-over-IP solutions on the market today are designed for general purpose applications, which means they are not suitable for unpredictable industrial environments. In fact, some seemingly commonplace applications, such as road traffic control and monitoring, oil and gas refineries and pipelines, mining pits, etc., should be classified as industrial-grade, and as such require using rugged, well-designed video-over-IP solutions to ensure that the video surveillance system works properly.
To meet these stringent requirements, Moxa’s new line of VPort industrial video-over-IP solutions feature an industrial-grade rugged design and extra-high reliability.
Moxa’s industrial video networking solutions include video servers and IP cameras to meet the requirements of a variety of application environments, such as transportation, utilities, factory monitoring, and automatic control systems. The video servers, which include video encoders and video decoders, are designed for rugged hardware protection for use in demanding industrial environments. The IP camera, with vandal-proof protection and high-quality day/night lens, is suitable for outdoor environments.
In addition to video networking products, Moxa is also an one source provider of industrial Ethernet switches, serial-to-Ethernet device servers, I/O servers, and embedded computing solutions for industrial automation applications. This means that you can use Moxa’s products to build a highly reliable industrial automation network.
Leading the Industrial Video-over-IP Evolution
Integrated and Applicable Video Networking Solutions
www.moxa.com emai l : [email protected] 9-4
Industrial Ethernet Solutions for Control and Automation
9
Video Networking Products
Redundant Power Inputs
IP30 Protection
Optional RJ45 or Fiber Ethernet port
No heater, fanless design
IP66-rated protection
Vandal-proof design
PoE and direct-wired power supplys
DIN-RailMounting
Products used in industrial environments must have a rugged design to provide better protection against adverse conditions. In general, ruggedized products should have the following characteristics:
1. Power Redundancy A backup power supply is required since power lines used in harsh industrial environments have a greater chance of failing. This means that industrial products should have at least 2 power inputs to provide sufficient redundancy.
2. Enclosure Protection A rugged mechanism design means having good physical protection against unexpected damage from external factors. The Ingress Protection (IP) rating index (EN60529) is an international classification system that rates the effectiveness of sealing for enclosures of electrical equipment against the intrusion of foreign objects (e.g., tools, dust, fingers) and moisture. The IP rating system can be used to provide a better protection of the effectiveness of an enclosure.
3. EMI and Surge Protection Compared to commercial-type environments, industrial environments are more likely to be subjected to severe electrical
and magnetic influences. In order to protect electronic devices, higher EMI and surge protection are essentials for industrial applications. And for some industrial applications, safety approvals and demanding certifications, such as UL508 and ATEX (ATmosphere EXplosible), are also required.
4. High MTBF (Mean Time Between Failures) The MTBF value is the “average” time between failures for a device. A higher MTBF value indicates that a device is more reliable.
5. Wide Operating Temperature Range The operating temperature range is also a key issue for industrial products. In fact, some industrial applications require products that are guaranteed to operate in temperatures ranging from as low as -40°C to as high as 75°C. For these types of applications, it is important to look for products that do not use a built-in fan, since products with fans tend to have a lower MTBF.
6. DIN-Rail Mounting and Panel MountingA 35 mm DIN-Rail is used for many industrial applications to provide a convenient means of mounting all of the devices used for the application. For this reason, it is essential that industrial products support both DIN-Rail mounting and panel mounting.
12/24 VDC or 24 VAC redundant power inputs•DIN-Rail mounting and panel mounting accessories available•IP30 protection enclosure •-40 to 75°C operating temperature range for T models•Choose either RJ45 or fiber optic Ethernet ports•Industrial EMI/ESD protection and UL508, •ATEX Class 1, Div. 2 (Pending) certifications
PoE (Power-over-Ethernet) and direct-wired power supply for •power redundancy-40 to 50°C operating temperature without heater or fan•IP66-rated for protection from rain and dust•Vandal-proof form factor for preventing damage from unexpected •external forcesVersatile installation options for outdoor environments•
Solution Tutorial
VPort Industrial Video Servers
VPort Series IP Cameras
Industrial-grade Rugged Design and Reliability
emai l : [email protected] www.moxa.com 9-5
0
9
8
OverviewVideo Netw
orking Products
Modular
Remote I/O
10
12
Media
ConvertersAccessories
11
7
Peer-to-PeerI/O
6
Active Ethernet I/O
5
Wireless
Ethernet
4
3
2
1
Modular
EthernetSwitches
Unmanaged
EthernetSwitches
Rackmount
EthernetSwitches
Managed
EthernetSwitches
OrderingInform
ationSolution TutorialVideo Networking Products
Finding user-friendly video-over-IP software is important, since users can get right to work with little training. Moxa provides user-friendly
IP surveillance software and a free SDK (software development kit) for application versatility.
Moxa SoftDVR™ IP surveillance software, which includes SoftDVR Lite (4 channels) and SoftDVR Pro (16 channels), is designed for small IP-based video surveillance systems. The client/sever-based network infrastructure makes it easy to build a user-friendly video surveillance system.
Multi-screen viewing format (max. 16 channels)•Event-driven recording•Search and playback are easy to use•Store data to network hard disk•Set schedule for recording and activating alarms•Remote access by web browser•
Moxa SoftNVR IP surveillance software can manage up to 64 channels in one system. This powerful video management software is designed for medium and large video networking surveillance systems. Features include advanced viewing, recording, and analyzing functions, and in addition to a user-friendly GUI, SoftNVR gives users a complete video management software solution for greater versatility.
Multi-screen viewing format (max. 64 channels)•Dual monitor capability•Video analytics and instant response•Video quality enhancement tools•Intelligent search to make locating recorded video files easy•
SoftDVR IP Surveillance Software
SoftNVR IP Surveillance Software
Free Software Development Kit for Third-party Software Developers and System Integrators
User-friendly Video-over-IP Surveillance Software for Application Versatility
Most video surveillance systems require customized video management functions, or must be integrated with other applications (e.g., SCADA, access control systems, fire alarm systems). For this reason, a user-friendly SDK (software development kit) is a good tool to have available for building customized video management systems. Moxa’s VPort SDK, which includes CGI Commands, ActiveX, and a C
library, is available free of charge to system integrators and third-party software developers. Learning to use the Moxa VPort SDK is easy, and detailed documentation and sample code is provided for quick reference. For detailed information about the SDK, please refer to the “SDK” introduction in this catalog.
Moxa VPort SDK
URL Command (CGI Commands)
ActiveX Control
API
HTML programming for web applications
Microsoft COM solution for plug-in in browsers and automation software (e.g., SCADA)
C Library for customized software and systems
www.moxa.com emai l : [email protected] 9-6
Industrial Ethernet Solutions for Control and Automation
9
Video Networking Products
VideoVideo Compression: MJPEG or MPEG4 (ISO/IEC 14496-2)Video Resolution:
Video Viewing: Adjustable image size and quality•Timestamp and text overlay•
Video Output: Via Ethernet port or BNC connector (1.0 Vpp, 75 ohms)
Audio Audio Input: 1 Line-in or MIC-in with 2-pin terminal block connectorAudio Output: 1 Line-out with 2-pin terminal block connector
IP66, day-and-night vandal-proof fixed dome IP camera for outdoors
25 Series
-40 to 50°C operating temperature; heater or fan not required ›IP66-rated for protection from rain and dust ›Direct-wired power input and PoE for power redundancy ›Up to 30 frames/sec at 720 x 480 resolution ›One camera lens for both day and night use ›
Introduction
The VPort 25 is a vandal-proof, IP66-rated, fixed dome IP camera for use in harsh, outdoor environments. With maximum resolution of 520 TVL and day-and-night CCD camera lens, the VPort 25 is especially well-suited for high performance video surveillance applications. To meet the outdoor environment requirements, the VPort 25 is IP66-rated
to protect it against dust and rain. In addition, the vandal-proof form factor design prevents damage from unexpected external forces, and the case-open sensor sends an alarm message when the VPort 25’s outer case is opened.
Heater and fan not required, supports direct-wired power input and PoE for power redundancy
High performance video, with full motion MJPEG/MPEG4 video stream
The VPort 25’s no-heater/fan-less embedded system provides greater reliability for outdoor use. In addition, the camera comes with
redundant power inputs: (1) direct power connection (12/24 VDC and 24 VAC) and (2) PoE (IEEE 802.3af) power input.
The VPort 25 uses the ASIC compression chip, which provides video performance up to full D1 (720 x 480) @ 30 FPS. To meet a wider
range of customer requirements, the VPort 25 supports dual-codecs, including the MJPEG and MPEG4 algorithms.
Specifications
CameraSensor: 1/3” Sony Super HAD or 1/3” Sony ExView Lens: Wide-end: F1.4, diagonal 115.4°, horizontal 90.3°
Tele-end: F2.4, diagonal 39.8°, horizontal 31.9°Focal length: F= 3-9 mm
Modulation: NTSC or PALCamera Angle: Pan: ±180°; tilt: ±85°, rotation: ±170° (manual control)Illumination: Color: 0.2 Lux at F1.2
Black and white: 0.03 Lux at F1.2Synchronization: InternalGamma Correction: 0.45White Balance: Auto tracking white balanceElectronic Shutter Speed: Auto: 1/60 (50) second to 1/100,000 second S/N Ratio: More than 50 dB (AGC off)AGC Control: On/OffFlickerless Control: On/Off Backlight Compensation: On/OffMirror: On/OffAuto Exposure, Auto Iris: On: Auto exposure
Off: Auto iris
NTSC PAL
Size Max. FPS Size Max. FPS
QVGA 320 x 240 30 320 x 288 25
CIF 352 x 240 30 352 x 288 25
VGA 640 x 480 30 640 x 576 25
4CIF 704 x 480 30 704 x 576 25
Full D1 720 x 480 30 720 x 576 25
VPort 25
Preliminary
emai l : [email protected] www.moxa.com 9-7
0
9
8
OverviewVideo Netw
orking Products
Modular
Remote I/O
10
12
Media
ConvertersAccessories
11
7
Peer-to-PeerI/O
6
Active Ethernet I/O
5
Wireless
Ethernet
4
3
2
1
Modular
EthernetSwitches
Unmanaged
EthernetSwitches
Rackmount
EthernetSwitches
Managed
EthernetSwitches
OrderingInform
ationVPort 25Video Networking Products
NetworkProtocols: TCP, UDP, HTTP, SMTP, FTP, Telnet, NTP, DNS, DHCP, UPnP, RTP, RTSP, ICMP, IGMPv3, SNMPv1/v2c/v3, DDNSEthernet: 1 10/100BaseT(X) auto negotiating RJ45 port
GPIO Digital Input: 1, max. 8 mA “High”: +13 to +30V “Low”: -30 to +3VRelay Output: 1, max. 24 VDC @ 1A
LED IndicatorsNetwork: 1 LED for 10 Mbps, 1 LED for 100 MbpsPower: Power On/OffSTAT: Indicates if the system booted properlyDIP Switch: To turn the LED light On/Off
Power Requirements Input Voltage: Redundant power inputs
12/24 VDC or 24 VAC with 2-pin terminal block connector•Power-over-Ethernet (IEEE 802.3af)•
Physical CharacteristicsCasing: IP66-rated for rain and dust protection, vandal-proof supportsDimensions (ø x H): 142 x 118.9 mm (5.60 x 4.68 in.)Weight: 1100 gInstallation: Surface mounting, wall mounting
Environmental LimitsOperating Temperature: -40 to 50°C (-40 to 122°F )Storage Temperature: -40 to 85°C (-40 to 185°F)Ambient Relative Humidity: 5 to 95% (non-condensing)
Regulatory ApprovalsSafety: UL508 (Pending) EMI: FCC Part 15, CISPR (EN55022) class AEMS: EN61000-4-2 (ESD), level 2
EN61000-4-3 (RS), level 3
EN61000-4-4 (EFT), level 3 EN61000-4-5 (Surge), level 3 EN61000-4-6 (CS), level 3 EN61000-4-12 (Oscillatory wave immunity), level 3Shock: IEC 60068-2-27Freefall: IEC 60068-2-32Vibration: IEC 60068-2-6
Warranty1 year (see www.moxa.com/warranty for details)
Alarm FeaturesVideo motion detection with sensitivity tuning•Video loss alarm•Built-in case-open sensor alarm•Daily repeat timing schedule•JPEG snapshots for pre/trigger/post alarm images•HTTP event servers for setting customized alarm actions•
Security User level password protection•IP address filtering•
System RequirementsPentium 4, 2.4 GHz or above•512 MB memory or above•Windows XP/2000 with SP2 or above•Internet Explorer 6.x or above•DirectX 9.0c or above•
Software Bundled FreeSoftDVR™ Lite: 1- to 4-ch IP surveillance software for viewing and recordingVPort SDK PLUS: Includes CGI commands and ActiveX Control for customized application or system integration for third-party developer (Please go to Moxa’s website to download the latest SDK version.)
Ordering Information
Product ModelCamera Sensor Modulation
SuperHAD Exview NTSC PAL
VPort 25-CAM3S52N √ √
VPort 25-CAM3S52P √ √
VPort 25-CAM3E52N √ √
VPort 25-CAM3E52P √ √
Dimensions (unit = mm)
Rear ViewFront ViewSide View
118.
9
142
84.8
84.8
42.4
25
42.4
32
15
55.4 55.4
3232
71
142
www.moxa.com emai l : [email protected] 9-8
Industrial Ethernet Solutions for Control and Automation
9
Video Networking Products
VPort 25 Accessories
IP Camera Mounting AccessoriesMounting KitFor mounting dome camera onto gooseneck/straight tube
VP-MKHeight: 74 mm (2.91 in.)Diameter: 140 mm (5.51 in.)Weight: 500 g (1.1 lbs)
Straight Tube Gooseneck Tube Mini Pendant
VP-ST1/VP-ST2Height: 500 mm (19.69 in.)/250 mm (9.84 in.)Diameter: 50 mm (1.97 in.)Weight: 1000 g (2.2 lbs)/1800 g (4 lbs)
VP-GT Dimensions: 323 x 385 mm (11.73 x 15.16 in.)Diameter: 92 x 42 mm (3.62 x 1.65 in.)Weight: 2100 g (4.6 lbs)
VP-MPDimensions: 184 x 104 x 115.2 mm (7.24 x 4.09 x 4.54 in.)Diameter: 44.5 mm (1.75 in.)Weight: 600 g (1.3 lbs)
Wall Box Mounting Standard Corner Mounting Plate Mini Corner Plate
For mounting gooseneck/mini pendants on the wall
VP-WBMDimensions: 270 x 166 x 95 mm (10.63 x 6.54 x 3.74 in.)Weight: 2200 g (4.8 lbs)
For mounting gooseneck/mini pendants in the corner
VP-CSTDimensions: 222 x 204 x 117 mm (8.74 x 8.03 x 4.61 in.)Weight: 2000 g (4.4 lbs)
For mounting gooseneck/mini pendants in the corner
VP-CSTMDimensions: 270 x 166 x 95 mm (10.63 x 6.54 x 3.74 in.)Weight: 800 g (1.8 lbs)
Outdoor Thin Pole Direct Mounting Outdoor Wide Pole Direct Mounting Stainless Steel Straps
For mounting gooseneck/mini pendants on a pole
VP-PTDDimensions: 232 x 136 x 50 mm (9.13 x 5.35 x 1.97 in.)Recommend Pole Diameter: 112~140 mm (4.4~5.5 in.)Weight: 700 g (1.6 lbs)
For mounting gooseneck/mini pendants on a pole
VP-PWDDimensions: 270 x 170 x 60 mm (10.63 x 6.69 x 2.36 in.)Recommend Pole Diameter: 112~130 mm (4.4~5 in.)Weight: 1000 g (2.2 lbs)
For direct pole mounting or pole box on a pole
VP-SS1Length: 700 mm (27.56 in.)Width: 16 mm (0.63 in.)Weight: 20 g (0.04 lbs)
emai l : [email protected] www.moxa.com 9-9
0
9
8
OverviewVideo Netw
orking Products
Modular
Remote I/O
10
12
Media
ConvertersAccessories
11
7
Peer-to-PeerI/O
6
Active Ethernet I/O
5
Wireless
Ethernet
4
3
2
1
Modular
EthernetSwitches
Unmanaged
EthernetSwitches
Rackmount
EthernetSwitches
Managed
EthernetSwitches
OrderingInform
ationVPort 354Video Networking Products
Full motion, 4-channel MJPEG/MPEG4 industrial video encoder
354 Series
IntroductionThe VPort 354 is a high performance, 4-channel industrial video encoder that provides up to 4CIF full frame rate performance (NTSC: 704 x 480 @ 30 FPS; PAL: 704 x 576 @ 25 FPS) for each channel, and supports a dual MJPEG/MPEG4 algorithm, making it especially well- suited for use with distributed surveillance systems in critical industrial
applications. In addition, a continuous pre/post event trigger video record function can help system administrators determine why an alarm was triggered. The 2-way audio is provided for the convenience of real-time communication between system administrators located at the central site, and engineers in the field.
Industrial design with -40 to 75°C operating temperature ›and fiber optic Ethernet port2 Ethernet ports for cascade and port redundancy ›SD card slot for local storage capability ›Modbus/TCP supported for easy communication with ›SCADA softwareVideo stream up to 30 frames/sec at 4CIF (704 x 480) ›resolution for each channel
Rugged design for mission-critical industrial environments-40 to 75°C wide operating temperature•Built-in single mode or multi mode fiber optic Ethernet port, no •media converter required2 Ethernet ports are provided for cascade and port redundancy• , and to free up switch ports1 • RS-232/422/485 COM port for controlling external serial device via Ethernet
More reliable with redundant 12/24 VDC and 24 VAC power inputs•Metal form factor with IP30 protection • against dustDIN-Rail mounting installation for industrial environments•UL508 • (Pending) and Class 1, Div. 2 (Pending) certified for hazardous locations
Advanced network protocols support efficient network transmission and integration Modbus/TCP for easy communication with SCADA software •Standard RTSP (real-time streaming protocol) video streaming for •easy integrationMulticast (IGMP) protocols for efficient network transmission•
Transparent PTZ control for easy control of PTZ camerasThe VPort 354 uses Moxa’s Real COM technology to implement transparent communication for RS-232/422/485 PTZ control. The benefit of this Transparent PTZ Control function is that there is no need
to build the PTZ control driver into the VPort product. Users can use a legacy PTZ control panel or keyboard to control a PTZ camera directly.
PTZ camera
Coaxial Cable
RS-232 or RS-485CCTV Monitor
Joystick and control panel
PTZ camera
VPort 354 video encoder VPort D351
video decoder
PC
Joystick andcontrol panel
Joystick andcontrol panel
Legacy PTZ camera control Transparent PTZ camera control via Ethernet
SNMPv1/v2c/v3 MIB-II for easy network management•QoS (ToS) for configuring the transmission priority of video streams•
UPnP, DDNS, and IP filtering supported •
SerialCCTV
EthernetSerialCCTV
Preliminary
www.moxa.com emai l : [email protected] 9-10
Industrial Ethernet Solutions for Control and Automation
9
Video Networking Products
SD card for storing video locally when the network is down
The VPort 354 is equipped with an SD card socket (V2.0) for local storage purposes. Enable local storage when the network is down and
the video stream cannot be transmitted to record events that occur during the down-time.
VideoVideo Compression: MJPEG, MPEG4 (ISO/IEC 14496-2)Video Inputs: 4, BNC connector (1.0 Vpp, 75 ohms)NTSC/PAL: Auto-sensing or manualVideo Resolution and FPS (frames per second):
Video Viewing:Adjustable image size and quality•Timestamp and text overlay•
AudioAudio Input: 1 Line-in or MIC-in, RCA connectorAudio Output: 1 Line-out, RCA connector
Network Protocols: TCP, UDP, HTTP, SMTP, FTP, Telnet, NTP, DNS, DHCP, UPnP, RTP, RTSP, ICMP, IGMPv3, QoS, SNMPv1/v2c/v3, DDNSEthernet: 2 10/100BaseT(X) auto negotiating RJ45 port, or 2 100BaseFX fiber port (Single/multi mode, SC connector)Optical Fiber:
Serial Port PTZ Port: 1 RS-232/422/485 terminal block connector, max. speed of 921.6 Kbps, with 15 KV ESD protectionCOM Port: 1 RS-232/422/485, DB9 female connector, max. speed of 921.6 Kbps, with 15 KV ESD protectionConsole Port: 1 RS-232 RJ45 port
GPIODigital Inputs: 4, max. 8 mA “High”: +13V to +30V “Low”: -30V to +3VRelay Outputs: 2, max. 24 VDC @ 1A
LED Indicators STAT: Indicates if the system booted properly or notPWR1: Power 1PWR2: Power 2
FAULT: Can be configured to correspond to system alarm, powerfailure, video loss, or disconnected networkV1: Video 1 input signal activeV2: Video 2 input signal activeV3: Video 3 input signal activeV4: Video 4 input signal active
Local StorageSD Socket: Standard SD socket V2.0 with SD LED indicator
Power Requirements Input Voltage: 2 12/24 VDC or 24 VAC inputs for redundancyPower Consumption: Approx. 12W
Physical CharacteristicsCasing: IP30 protection, metal caseDimensions (W x H x D): 80.2 x 135 x 105 mm (3.16 x 5.31 x 4.13 in.) Installation: DIN-Rail mounting, wall mounting (optional kit)
Environmental LimitsOperating Temperature: 0 to 60°C (32 to 140°F) -40 to 75°C (-40 to 167°F) for T modelsStorage Temperature: -40 to 85°C (-40 to 185°F)Ambient Relative Humidity: 5 to 95% (non-condensing)
Regulatory ApprovalsSafety: UL508 (Pending) Hazardous Location: UL/cUL Class I, Division 2, Groups A, B, C and D (Pending); ATEX Class I, Zone 2, Ex nC IIC (Pending) EMI: FCC Part 15, CISPR (EN55022) class AEMS: EN61000-4-2 (ESD), level 2
EN61000-4-3 (RS), level 3 EN61000-4-4 (EFT), level 3 EN61000-4-5 (Surge), level 3 EN61000-4-6 (CS), level 3 EN61000-4-12 (Oscillatory wave immunity), level 3
Shock: IEC 60068-2-27Freefall: IEC 60068-2-32Vibration: IEC 60068-2-6MTBF: 160,000 hrs Database: MIL-HDBK-217F, GB 25˚C*Please check Moxa’s website for the most up-to-date certification status.
Warranty5 years (see www.moxa.com/warranty for details)
Alarm FeaturesPre/post alarm video recording (9 MB memory)•Video motion detection with sensitivity tuning•Video loss alarm•Daily repeat timing schedule•JPEG snapshots for pre/trigger/post alarm images•Automatic transfer of stored images via email or FTP with event-•triggered actionsHTTP Event Servers for setting customized alarm actions•
PAN/TILT/ZOOMPTZ camera control through RS-232/422/485 port•PTZ control functions: PAN, TILT, ZOOM, FOCUS, moving speed, •preset position (max. 25 positions)10 custom commands for customized PTZ control•Supported devices and protocols: Pelco D, Pelco P, Dynacolor •DynaDome, Custom CameraPTZ driver upload•
Specifications
NTSC PAL
Size Max. FPS Size Max. FPS
QCIF 176 x 120 30 176 x 144 25
CIF 352 x 240 30 352 x 288 25
2CIF 704 x 240 30 704 x 288 25
VGA 640 x 480 30 640 x 576 25
4CIF 704 x 480 30 704 x 576 25
VPort 354
100BaseFX
Multi Mode Single Mode
Wavelength 1300 nm 1310 nmMax. TX -10 dBm 0 dBm
Min. TX -20 dBm -5 dBm
RX Sensitivity -32 dBm -34 dBm
Link Budget 12 dB 29 dB
Typical Distance 5 km a
4 km b 40 km c
Saturation -6 dBm -3 dBm
a. 50/125 μm, 800 MHz*km fiber optic cableb. 62.5/125 μm, 500 MHz*km fiber optic cablec. 9/125 μm, 3.5 PS/(nm*km) fiber optic cable
emai l : [email protected] www.moxa.com 9-11
0
9
8
OverviewVideo Netw
orking Products
Modular
Remote I/O
10
12
Media
ConvertersAccessories
11
7
Peer-to-PeerI/O
6
Active Ethernet I/O
5
Wireless
Ethernet
4
3
2
1
Modular
EthernetSwitches
Unmanaged
EthernetSwitches
Rackmount
EthernetSwitches
Managed
EthernetSwitches
OrderingInform
ationVideo Networking Products VPort 354
Dimensions (unit = mm)
Mounting Kit Rear ViewFront ViewSide View
8.8
70
VPort 354
PTZ
AUDIO OUTPUT
VIDEO OUTPUT
AUDIO INPUT
V1
SD V3
V2
V4
V1
V2
V3
V4
1
2
3
4
5
STAT
PWR1
PWR2
FAULT
100M
10M
1
100M
10M
1
99.250
105
4046.2
35135
30
30
86.1
51.5
64
7380.2
55
DIN-Rail Kit
Ordering Information
Product Model Port Interface
Standard Temperature(0 to 60˚C)
Extended Temperature(-40 to 75˚C)
10/100BaseT(X)Multi Mode,SC Connector
Single Mode,SC Connector
VPort 354 VPort 354-T 2
VPort 354-MM-SC VPort 354-MM-SC-T 2
VPort 354-SS-SC VPort 354-SS-SC-T 2
Optional AccessoriesSoftDVR™ Pro: • 16-channel IP surveillance software for viewing and recordingDR-4524: • 45W/2A DIN-Rail 24 VDC power supply, 85 to 264 VAC inputDR-75-24: • 75W/3.2A DIN-Rail 24 VDC power supply, 85 to 264 VAC inputDR-120-24:• 120W/5A DIN-Rail 24 VDC power supply, 88 to 132 VAC/176 to 264 VAC input by switchWK-46: • Wall mounting kitRK-4U: • 4U-high 19” rack mounting kit
Transparent PTZ Control for controlling PTZ cameras with legacy PTZ •control panel or keyboard connected to a PC or VPort decoder
Security User level password protection•IP address filtering •
System RequirementsPentium 4, 2.4 GHz or above•512 MB memory or above•Windows XP/2000 with SP2 or above•
Internet Explorer 6.x or above•DirectX 9.0c or above•
Software Bundled FreeSoftDVR™ Lite: 1- to 4-ch IP surveillance software for viewing & recording VPort SDK PLUS: Includes CGI commands and ActiveX control for customized applications or system integration for third-party developers (Please visit Moxa’s website to download the latest SDK version.)
www.moxa.com emai l : [email protected] 9-12
Industrial Ethernet Solutions for Control and Automation
9
Video Networking Products
Full motion, 1-channel MJPEG/MPEG4 industrial video encoder
351 Series
IntroductionThe VPort 351 is a high performance, 1-channel industrial video encoder that provides up to full D1, full frame rate performance (NTSC: 720 x 480 @ 30 FPS; PAL: 720 x 576 @ 25 FPS) and supports a dual MJPEG/MPEG4 algorithm, making it especially well-suited for use with distributed surveillance systems in critical industrial
applications. In addition, a continuous pre/post event trigger video record function can help system administrators determine why an alarm was triggered. The 2-way audio is provided for the convenience of real-time communication between system administrators located at the central site, and engineers in the field.
Industrial design with -40 to 75°C operating temperature and ›fiber optic Ethernet port Video stream up to 30 frames/sec at full D1 (720 x 480) resolution ›Pre/post-alarm video recording function for advanced ›surveillance2-way (1 in/1 out) audio supported ›Free VPort SDK PLUS and 4-channel video surveillance software ›
Rugged design for mission-critical industrial environments
-40 to 75°C wide operating temperature•Built-in single mode or multi mode optical fiber Ethernet port; no media •converter requiredUL508 and Class 1, Div. 2 (Pending) certified for hazardous locations•
Advanced network protocols support efficient network transmission and integration
Standard RTSP (real-time streaming protocol) video streaming for •easy integrationMulticast (IGMP) protocols for efficient network transmission•SNMPv1/v2c/v3 MIB-II for easy network management•
QoS (ToS) for configuring the transmission priority of video •streamsUPnP, DDNS, and IP filtering supported•
Transparent PTZ control for easy control of PTZ cameras
The VPort 351 adopts Moxa’s Real COM technology to implement transparent communication for RS-232/422/485 PTZ control. The benefit of this transparent PTZ control function is that it eliminates
the need to build a PTZ control driver into the VPort product, since legacy PTZ control panels or keyboards can be used to control the PTZ camera directly.
PTZ camera
Coaxial Cable
RS-232 or RS-485CCTV Monitor
Joystick and control panel
PTZ camera
VPort 351 video encoder VPort D351
video decoder
PC
Joystick andcontrol panel
Joystick andcontrol panel
Legacy PTZ camera control Transparent PTZ camera control via Ethernet
SerialCCTV
EthernetSerialCCTV
Redundant 12/24 VDC and 24 VAC power inputs ensure greater •reliabilityMetal form factor with IP30 protection against dust•DIN-Rail mounting installation for industrial environments•
VPort 351
emai l : [email protected] www.moxa.com 9-13
0
9
8
OverviewVideo Netw
orking Products
Modular
Remote I/O
10
12
Media
ConvertersAccessories
11
7
Peer-to-PeerI/O
6
Active Ethernet I/O
5
Wireless
Ethernet
4
3
2
1
Modular
EthernetSwitches
Unmanaged
EthernetSwitches
Rackmount
EthernetSwitches
Managed
EthernetSwitches
OrderingInform
ationVPort 351Video Networking Products
VideoVideo Compression: MJPEG, MPEG4 (ISO/IEC 14496-2)Video Input: 1, BNC connector (1.0 Vpp, 75 ohms)Video Output: 1, loop-through BNC connectorNTSC/PAL: Auto-sensing or manualVideo Resolution and FPS (frames per second):
Video Viewing:
Adjustable image size and quality•Timestamp and text overlay•
AudioAudio Input: 1 Line-in or MIC-in, 3.5 mm phone jackAudio Output: 1 Line-out, 3.5 mm phone jack
Network Protocols: TCP, UDP, HTTP, SMTP, FTP, Telnet, NTP, DNS, DHCP, UPnP, RTP, RTSP, ICMP, IGMPv3, QoS, SNMPv1/v2c/v3, DDNS
Ethernet: 1 10/100BaseT(X) auto negotiating RJ45 port, or 1 100BaseFX fiber port (Single/multi mode, SC connector)
Optical Fiber:
Serial Port PTZ Port: 1, RS-232/422/485 terminal block connector, max. 115.2 KbpsConsole Port: 1 RS-232 RJ45 port
GPIODigital Inputs: 2, max. 8 mA “High”: +13V to +30V “Low”: -30V to +3VRelay Outputs: 2, max. 24 VDC @ 1A
LED Indicators STAT: Indicates if the system boots properly or notPWR1: Power 1PWR2: Power 2
FAULT: Can be configured to correspond to system alarm, power failure, video loss, or disconnected networkVIDEO: Video input signal activeAUDIO TEST: Audio input signal in test mode
PTZ: PTZ control signal active
Physical CharacteristicsCasing: IP30 protection, metal caseDimensions (W x H x D): 52.98 x 135 x 105 mm (2.09 x 5.31 x 4.13 in.) Weight: 960 g Installation: DIN-Rail mounting, wall mounting (optional kit)
Power Requirements Input Voltage: 2 12/24 VDC or 24 VAC inputs for redundancyPower Consumption: Max. 8W
Environmental LimitsOperating Temperature: 0 to 60°C (32 to 140°F) -40 to 75°C (-40 to 167°F) for T modelsStorage Temperature: -40 to 85°C (-40 to 185°F)Ambient Relative Humidity: 5 to 95% (non-condensing)
Regulatory ApprovalsSafety: UL508 Hazardous Location: UL/cUL Class I, Division 2, Groups A, B, C, and D (Pending); ATEX Class I, Zone 2, Ex nC IIC (Pending) EMI: FCC Part 15, CISPR (EN55022) class AEMS: EN61000-4-2 (ESD), level 2 EN61000-4-3 (RS), level 3 EN61000-4-4 (EFT), level 3 EN61000-4-5 (Surge), level 3 EN61000-4-6 (CS), level 3 EN61000-4-12 (Oscillatory wave immunity), level 3Shock: IEC 60068-2-27Freefall: IEC 60068-2-32Vibration: IEC 60068-2-6
MTBF: 272,000 hrs Database: MIL-HDBK-217F, GB 25˚C*Please check Moxa’s website for the most up-to-date certification status.
Warranty5 years (see www.moxa.com/warranty for details)
Alarm FeaturesPre/post alarm video recording (9 MB memory)•Video motion detection with sensitivity tuning•Video loss alarm•Daily repeat timing schedule•JPEG snapshots for pre/trigger/post alarm images•Automatic transfer of stored images via email or FTP with event-•triggered actionsHTTP Event Servers for setting customized alarm actions•
PAN/TILT/ZOOMPTZ camera control through RS-232/422/485 port•PTZ control functions: PAN, TILT, ZOOM, FOCUS, moving speed, •preset position (max. 25 positions)10 custom commands for customized PTZ control•Supported devices and protocols: Pelco D, Pelco P, Dynacolor •DynaDome, Custom CameraPTZ driver upload•Transparent PTZ control for controlling the PTZ camera with legacy •PTZ control panel or keyboard connected to a PC or VPort decoder
Security User level password protection•IP address filtering •
Specifications
NTSC PAL
Size Max. FPS Size Max. FPS
QVGA 320 x 240 30 320 x 288 25
CIF 352 x 240 30 352 x 288 25
VGA 640 x 480 30 640 x 576 25
4CIF 704 x 480 30 704 x 576 25
Full D1 720 x 480 30 720 x 576 25
100BaseFX
Multi Mode Single Mode
Wavelength 1300 nm 1310 nmMax. TX -10 dBm 0 dBm
Min. TX -20 dBm -5 dBm
RX Sensitivity -32 dBm -34 dBm
Link Budget 12 dB 29 dB
Typical Distance 5 km a
4 km b 40 km c
Saturation -6 dBm -3 dBm
a. 50/125 μm, 800 MHz*km fiber optic cableb. 62.5/125 μm, 500 MHz*km fiber optic cablec. 9/125 μm, 3.5 PS/(nm*km) fiber optic cable
www.moxa.com emai l : [email protected] 9-14
Industrial Ethernet Solutions for Control and Automation
9
Video Networking Products
Dimensions (unit = mm)
Mounting Kit Rear ViewFront ViewSide View DIN-Rail Kit
Ordering Information
Product Model Port Interface
Standard Temperature(0 to 60˚C)
Extended Temperature(-40 to 75˚C)
10/100BaseT(X)Multi Mode,SC Connector
Single Mode,SC Connector
VPort 351 VPort 351-T 1
VPort 351-M-SC VPort 351-M-SC-T 1
VPort 351-S-SC VPort 351-S-SC-T 1
Optional AccessoriesSoftDVR™ Pro: • 16-channel IP surveillance software for viewing and recordingDR-4524:• 45W/2A DIN-Rail 24 VDC power supply, 85 to 264 VAC inputDR-75-24:• 75W/3.2A DIN-Rail 24 VDC power supply, 85 to 264 VAC inputDR-120-24:• 120W/5A DIN-Rail 24 VDC power supply, 88 to 132 VAC/176 to 264 VAC input by switchWK-46: • Wall mounting kitRK-4U: • 4U-high 19” rack mounting kit
VPort 351
System RequirementsPentium 4, 2.4 GHz or above•512 MB memory or above•Windows XP/2000 with SP2 or above•Internet Explorer 6.x or above•DirectX 9.0c or above•
Software Bundled FreeSoftDVR™ Lite: 1- to 4-channel IP surveillance software for viewing and recording
VPort SDK PLUS: Includes CGI commands and ActiveX Control for customized application or system integration for third-party developer (Please go to Moxa’s website to download the latest SDK version.)
emai l : [email protected] www.moxa.com 9-15
0
9
8
OverviewVideo Netw
orking Products
Modular
Remote I/O
10
12
Media
ConvertersAccessories
11
7
Peer-to-PeerI/O
6
Active Ethernet I/O
5
Wireless
Ethernet
4
3
2
1
Modular
EthernetSwitches
Unmanaged
EthernetSwitches
Rackmount
EthernetSwitches
Managed
EthernetSwitches
OrderingInform
ationVPort 3310Video Networking Products
Rugged design, 1-channel MPEG4 industrial video server (encoder) 3310 Series
Introduction
The VPort 3310 is a 1-channel industrial video server (encoder) that uses the standard MPEG4 algorithm, and features DIN-Rail mounting capability, 24 VDC redundant power inputs, and IP30 protection to meet the requirements of inustrial environments. The cutting edge MPEG4 algorithm gives VPort 3310 an FPS of up to 30 in CIF resolution (352 x 240), with maximum bandwidth of
1.6 Mbps, to provide high video performance and more efficient network transmission. In addition, VPort 3310 also supports audio communication for a voice-over-IP solution, making the control of your video surveillance system more real-time.
Industrial design with -40 to 75°C operating temperature ›Compress analog video/audio signals in MPEG4 video stream ›Multicast (IGMP) for transmission efficiency ›Video stream up to 30 frames/sec at CIF (352 x 240) resolution ›Free VPort SDK and 4-channel video surveillance software ›
Video Video Compression: MPEG4 (ISO/IEC 14496-2) Video Input: 1, BNC connector (1.0 Vpp, 75 ohms)Video Output: 1, loop-through BNC connectorNTSC/PAL: Auto-sensing or manualVideo Resolution and FPS (frame per second):
Video Viewing:Adjustable image size and quality•B/W or Color control•Timestamp and text overlay•
AudioAudio Input: 1 Line-in or Mic-in port, 3.5 mm phone jack
Network Protocols: TCP, UDP, HTTP, SMTP, FTP, RTSP, RTP, RTCP, NTP, DNS, DDNS, IGMPv3, SNMPv1/v2c/v3, DHCP, UPnP, PPPoEEthernet: 1 RJ45 port, 10/100BaseT(X) auto negotiation
Serial Port COM Port: 1, RS-232 in DB9 Male or RS-485 in terminal block, max. 115.2 Kbps
GPIODigital Inputs: 2, max. 8 mA “High”: +13V to +30V “Low”: -30V to +3VRelay Outputs: 2, max. 24 VDC @ 1A
LED Indicators PWR1: Power 1PWR2: Power 2FAULT: Power failureVIDEO: Video inputAUDIO: Audio inputSERIAL: COM port status
Physical CharacteristicsCasing: IP30 protection, metal case
Dimension (W x H x D): 52.98 x 135 x 105 mm (2.09 x 5.31 x 4.13 in.)Weight: 790 g Installation: DIN-Rail mounting, wall mounting (optional kit)
Power Requirements Input Voltage: 2 24 VDC power inputs for redundancy
Environmental LimitsOperating Temperature: 0 to 60°C (32 to 140°F) -40 to 75°C (-40 to 167°F) for T modelStorage Temperature: -40 to 85°C (-40 to 185°F)Ambient Relative Humidity: 5 to 95% (non-condensing)
Specifications
NTSC PAL
Size Max. FPS Size Max. FPS
QCIF 176 x 120 30 176 x 144 25
CIF 352 x 240 30 352 x 288 25
VGA 640 x 480 10 640 x 576 8
4CIF 704 x 480 10 704 x 576 8
www.moxa.com emai l : [email protected] 9-16
Industrial Ethernet Solutions for Control and Automation
9
Video Networking Products
Regulatory Approvals EMI: FCC Part 15, CISPR (EN55022) class BEMS: EN61000-4-2 (ESD), level 3
EN61000-4-3 (RS), level 3 EN61000-4-4 (EFT), level 4 EN61000-4-5 (Surge), level 3 EN61000-4-6 (CS), level 3 EN61000-4-8 EN61000-4-11 EN61000-4-12
Shock: IEC 60068-2-27Freefall: IEC 60068-2-32Vibration: IEC 60068-2-6MTBF: 152,000 hrs
Warranty5 years (see www.moxa.com/warranty for details)
Alarm FeaturesVideo motion detection with sensitivity tuning •Daily repeat timing schedule•
JPEG snapshots for pre/trigger/post alarm images•Automatic transfer of stored images via email or FTP with •event-triggered actions
PAN/TILT/ZOOMPTZ camera control through RS-232/485 port •Automatic PTZ camera model detection•Supported devices protocol: Sony VISCA, Cannon VC-C1/VC-C3/ •VC-C4, Samsung SmartDOME, Dynacolor DynaDOME, Pelco D protocol, Liling PIH-7x00, Ernitec, Custom Camera
SecurityUser level password protection•IP address filtering•
Software Bundled FreeSoftDVR™ Lite: 1- to 4-channel IP surveillance software for viewing and recordingVPort SDK: Includes CGI commands and ActiveX Control and API for customized application or system integration for third-party developer (Please contact with Moxa’s sales representative if you require VPort SDK.)
Dimensions (unit = mm)
Mounting Kit Rear ViewSide View Front ViewDIN-Rail Kit
VPort 3310:• 1-channel MPEG4 industrial video server with 24 VDC redundant power inputs, 0 to 60°CVPort 3310-T:• 1-channel MPEG4 industrial video server with 24 VDC redundant power inputs, -40 to 75°C
Ordering Information
Optional AccessoriesSoftDVR™ Pro: • 16-channel IP surveillance software for viewing and recording
DR-4524: • 45W/2A DIN-Rail 24 VDC power supply, 85 to 264 VAC input
DR-75-24: • 75W/3.2A DIN-Rail 24 VDC power supply, 85 to 264 VAC input
DR-120-24: • 120W/5A DIN-Rail 24 VDC power supply, 88 to 132 VAC/176 to 264 VAC input by switch
WK-46: • Wall mounting kit
RK-4U:• 4U-high 19” rack mounting kit
VPort 3310
emai l : [email protected] www.moxa.com 9-17
0
9
8
OverviewVideo Netw
orking Products
Modular
Remote I/O
10
12
Media
ConvertersAccessories
11
7
Peer-to-PeerI/O
6
Active Ethernet I/O
5
Wireless
Ethernet
4
3
2
1
Modular
EthernetSwitches
Unmanaged
EthernetSwitches
Rackmount
EthernetSwitches
Managed
EthernetSwitches
OrderingInform
ationVPort 251Video Networking Products
Full motion, 1-channel MJPEG/MPEG4 video encoder 251
Introduction
Compress analog video/audio signals into MJPEG/MPEG4 ›video streamVideo stream up to 30 frames/sec at full D1 (720 x 480) resolution ›2-way (1 in, 1 out) audio supported ›Transparent PTZ control for using legacy PTZ control panel or › keyboardLoop-through power output for powering an analog camera ›Free VPort SDK PLUS and 4-channel video surveillance software ›
The VPort 251 is a high performance, 1-channel video encoder with compact form factor that is suitable for installation in a variety of locations, including outdoor camera cabinets. To make installation easier, the VPort 251 supports both panel mounting and DIN-Rail mounting (with DK-35A accessory), and 1 loop-through power output for powering an analog camera. In addition, the VPort 251 provides
up to full D1, full frame rate video performance (NTSC: 720 x 480 up to 30 FPS; PAL: 720 x 576 up to 25 FPS) and supports both MJPEG or MPEG4, making it especially well-suited for use with distributed video surveillance systems. A 2-way audio function is also provided for the convenience of real-time communication between system administrators located at the central site, and engineers in the field.
Specifications
VideoVideo Compression: MJPEG, MPEG4 (ISO/IEC 14496-2)
Video Inputs: 1, BNC connector (1.0 Vpp, 75 ohms)
NTSC/PAL: Auto-sensing or manual
Video Resolution and FPS (frame per second):
NTSC PAL
Size Max. FPS Size Max. FPS
QVGA 320 x 240 30 320 x 288 25
CIF 352 x 240 30 352 x 288 25
VGA 640 x 480 30 640 x 576 25
4CIF 704 x 480 30 704 x 576 25
Full D1 720 x 480 30 720 x 576 25
Video Viewing:
Adjustable image size and quality•Timestamp and text overlay•
AudioAudio Input: 1 Line-in or Mic-in, 3.5 mm phone jack
Audio Output: 1 Line-out, 3.5 mm phone jack
Network Protocols: TCP, UDP, HTTP, SMTP, FTP, Telnet, NTP, DNS, DHCP, UPnP, RTP, RTSP, ICMP, IGMPv3, QoS, DDNS, SNMPv1/v2c/v3
Ethernet: 1 RJ45 port, 10/100BaseT(X) auto negotiation
Serial Port PTZ Port: 1, RS-232/422/485 terminal block connector, max. 115.2 Kbps
Console Port: 1 RS-232 RJ45 port
GPIODigital Input: 1, max. 8 mA
“High”: +13V to +30V
“Low”: -30V to +3V
Relay Output: 1, max. 24 VDC @ 1A
LED IndicatorsSTAT: Indicates if the system boots properly or not
VIDEO: Video input signal active
PTZ: PTZ control signal active
Physical CharacteristicsDimensions (W x H x D): 88.2 x 106 x 50 mm (3.47 x 4.17 x 1.97 in.)
Weight: 850 g
Installation: Wall (Panel) mounting, DIN-Rail mounting (optional kit)
Power Requirements Input: 12/24 VDC or 24 VAC power input
Output: 2-pin terminal block connector for loop-through from power input
Power Consumption: Approx. 7.5W
www.moxa.com emai l : [email protected] 9-18
Industrial Ethernet Solutions for Control and Automation
9
Video Networking Products
Environmental LimitsOperating Temperature: 0 to 60°C (32 to 140°F)
Storage Temperature: -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity: 5% to 95% (non-condensing)
Regulatory ApprovalsEMI: FCC Part 15, CISPR (EN55022) class A
EMS: EN61000-4-2 (ESD), level 2
EN61000-4-3 (RS), level 3
EN61000-4-4 (EFT), level 3
EN61000-4-5 (Surge), level 3
EN61000-4-6 (CS), level 3
EN61000-4-12 (Oscillatory wave immunity), level 3
Shock: IEC 60068-2-27
Freefall: IEC 60068-2-32
Vibration: IEC 60068-2-6
Warranty5 years (see www.moxa.com/warranty for details)
Alarm FeaturesVideo motion detection with sensitivity tuning •Video loss alarm •Daily repeat timing schedule•JPEG snapshots for pre/trigger/post alarm images•Automatic transfer of stored images via email or FTP with •event-triggered actionsHTTP Event Servers for setting customized alarm actions•
PAN/TILT/ZOOMPTZ camera control through RS-232/422/485 port•PTZ control functions: PAN, TILT, ZOOM, FOCUS, moving speed, •preset position (max. 25 positions)10 custom commands for customized PTZ control •Supported devices and protocols: •Pelco D, Pelco P, Dynacolor DynaDOME, Custom CameraPTZ driver upload•Transparent PTZ control for controlling the PTZ camera with legacy •PTZ control panel or keyboard connected to a PC or VPort decoder
Security User level password protection•IP address filtering•
System RequirementsPentium 4, 2.4 GHz or above•512 MB memory or above•Windows XP/2000 with SP2 or above•Internet Explorer 6.x or above•DirectX 9.0c or above•
Software Bundled FreeSoftDVR™ Lite: 1- to 4-ch IP surveillance software for viewing and recording
VPort SDK PLUS: Includes CGI commands and ActiveX Control for customized application or system integration for third-party developer (Please go to Moxa’s website to download the latest SDK version.)
106
100.2
88.2
25
125.6
50
VPort 2511-Channel Video Encoder
Ordering Information VPort 251: 1-channel MJPEG/MPEG4 video encoder, 0 to 60°C
Optional AccessoriesSoftDVR™ Pro:• 16-channel IP surveillance software for viewing and recordingPower Adaptor•- US Plug: 120 VAC, 60Hz, P/N: 1117000025100- GER Plug: 230 VAC, 50Hz, P/N: 1117000025200- UK Plug: 230 VAC, 50Hz, P/N: 1117000025400- JP Plug: 100 to 240 VAC, 50Hz/60Hz, P/N: 1117000022700
DK-35A:• DIN-Rail mounting kit (35 mm)
Dimensions (unit = mm)
Front View
Rear View
Side View Top View
VPort 251
emai l : [email protected] www.moxa.com 9-19
0
9
8
OverviewVideo Netw
orking Products
Modular
Remote I/O
10
12
Media
ConvertersAccessories
11
7
Peer-to-PeerI/O
6
Active Ethernet I/O
5
Wireless
Ethernet
4
3
2
1
Modular
EthernetSwitches
Unmanaged
EthernetSwitches
Rackmount
EthernetSwitches
Managed
EthernetSwitches
OrderingInform
ationVPort 2141Video Networking Products
Compact, 4-channel MJPEG video server (encoder)
Compress analog video signals in MJPEG video stream ›Video stream up to 30 frames/sec at CIF (352 x 240) resolution, ›and 15 frames/sec at Quad view PPPoE, DDNS, UPnP, and IP filtering supported ›Free VPort SDK and 4-channel video surveillance software ›
2141
Introduction
Moxa VPort 2141 video server, equipped with 4-channel video inputs image digitizer, image compressor with MJPEG compression, and web server with 10/100 Mbps Ethernet, can digitize analog video sources
and distribute digital images over IP network, turning your CCTV system into a “Video-over-IP” network system.
Specifications
Video Video Compression: MJPEGVideo Input: 4, BNC connector (1.0 Vpp, 75 ohms)NTSC/PAL: Auto-sensing or manualVideo Resolution and FPS (frame per second):
Video Viewing:Adjustable image size and quality•B/W or Color control•Timestamp and text overlay•5 privacy mask for each camera•
Network Protocols: TCP, HTTP, SMTP, FTP, NTP, DNS, DHCP, PPPoE, DDNS, UPnPEthernet: 1 RJ45 port, 10/100BaseT(X) auto negotiiation
Serial Port COM1 Port: RS-232 in DB9 male, max. 115.2 KbpsCOM2 Port: RS-485 in terminal block, max. 115.2 Kbps
GPIODigital Inputs: 4, max. 12 VDC @ 50 mARelay Outputs: 4, max. 24 VDC @ 1A, 125 VAC @ 0.5A
NTSC PAL
Size Max. FPS Size Max. FPS
QCIF 176 x 112 30 176 x 144 25
CIF 352 x 240 30 352 x 288 25
4CIF 704 x 480 10 704 x 576 8
Quad 10 8
LED Indicators Network: ACTIVE, LINK, FDX (full duplex) System: POWER, CONNECT, SERIAL
Physical CharacteristicsDimension (W x H x D): 146.2 x 163.2 x 40 mm (5.76 x 6.43 x 1.57 in.)Weight: 820 gInstallation: Wall mounting, DIN-Rail mounting (with optional kit)
Power Requirements Input Voltage: 12 VDC, 1.5A Consumption: Approx. 8W Alternative Power Input: Terminal block for 12~15 VDC/VAC, min. 1.5A Power Output: Terminal block for 12 VDC, max. 500 mA
Environmental LimitsOperating Temperature: 0 to 60°C (32 to 140°F)Storage Temperature: -40 to 70°C (-40 to 158°F)Ambient Relative Humidity: 5 to 95% (non-condensing)
Regulatory ApprovalsCE, FCC
Warranty5 years (see www.moxa.com/warranty for details)
Alarm FeaturesVideo motion detection with percentage and sensitivity tuning •Daily repeat timing schedule•JPEG snapshots for pre/trigger/post alarm images•Automatic transfer of stored images via email or FTP with •event-triggered actions
www.moxa.com emai l : [email protected] 9-20
Industrial Ethernet Solutions for Control and Automation
9
Video Networking Products
PAN/TILT/ZOOMPTZ camera control through RS-232/485 port •Automatic PTZ camera model detection•Supported devices and protocol: Sony VISCA, Cannon VC-C1/•VC-C3/VC-C4, Dynacolor SmartDOME, Pelco D-protocol, Liling PIH-7x00, Ernitec, Custom Camera
SecurityUser level password protection•IP address filtering •
Software Bundled FreeSoftDVR™ Lite: 1- to 4-channel IP surveillance software for viewing and recordingVPort SDK: Includes CGI commands and ActiveX Control and API for customized application or system integration for third-party developer (Please contact with Moxa’s sales representative if you require VPort SDK.)
Dimensions (unit = mm)
Rear View
Top ViewSide View Front View
VPort 2141: 4-channel MJPEG video server with 100-240V power adaptor (12 VDC, 1.5A, or 12 VDC, 1.25A for UK plug)
Optional AccessoriesSoftDVR™ Pro: • 16-channel IP surveillance software for viewing and recordingDK-35A: • DIN-Rail mounting kit (35 mm)
Ordering Information
VPort 2141
emai l : [email protected] www.moxa.com 9-21
0
9
8
OverviewVideo Netw
orking Products
Modular
Remote I/O
10
12
Media
ConvertersAccessories
11
7
Peer-to-PeerI/O
6
Active Ethernet I/O
5
Wireless
Ethernet
4
3
2
1
Modular
EthernetSwitches
Unmanaged
EthernetSwitches
Rackmount
EthernetSwitches
Managed
EthernetSwitches
OrderingInform
ationVPort D351Video Networking Products
1-channel MJPEG/MPEG4 industrial video decoder D351
Introduction
The VPort D351 is a 1-channel video decoder for decoding MPEG4/MJPEG video streams from VPort series video encoders (not include VPort 2110, VPort 2140, VPort 2310, VPort 2141, and VPort 3310) and VPort IP Cameras back to analog video signals. The analog video signal can be sent to legacy CCTV devices, such as monitors, multiplexers, and matrix switches, which can be used as originally intended as part of CCTV systems. In addition, bi-directional audio enables ready-to-use voice-over-IP communication between the video
encoder and decoder. Monitoring cameras that are part of large CCTV systems is easy with the VPort D351, which can be set up to switch between different video sources either manually or automatically within a given time interval. Up to 64 video sources can be included in the list. In addition, the 2 DIs located on the top panel of the VPort D351 can be used to create 2 control buttons for up and down video source selection.
Decode MJPEG and MPEG4 video streams to analog video ›signal automaticallyManual selection or automatic scan with maximum of ›64 video sources2-way (1 in/1 out) audio supported ›Transparent › PTZ control with legacy PTZ controller SNMP for network management ›
Specifications
Video Video Decoding: MPEG4, MJPEG (Auto detecting) Video Input: Video streams from VPort series video encoders and VPort series IP cameras over TCP/IP networks (not include VPort 2110, VPort 2140, VPort 2310, VPort 2141, and VPort 3310)Video Output: 1, BNC connector, NTSC or PALResolution: Max. 540 TVL lineVideo Source: Up to 64, selected manually by web server or digital inputs, or selected automatically by scanning within a set time intervalVideo Viewing:
Max. 30/25 FPS (NTSC/PAL) can be decoded•OSD (on-screen display) with video source, video source IP, date/•time, and customized information
AudioAudio Input: 1 Line-in or Mic-in Audio Output: 1 Line-outAudio Encoding: PCM, MonoAudio Decoding: PCM, Mono
Network Protocols: TCP, UDP, HTTP, SMTP, Telnet, NTP, DNS, DHCP, UPnP, RTP, RTSP, SNMPv1/v2c/v3Ethernet: 1 RJ45 port, 10/100BaseT(X) auto negotiiation
Serial Port PTZ Port: 1, RS-232/422/485 terminal block connector, max. 115.2 Kbps baudrate
Console Port: 1, RS-232 RJ45 port
GPIODigital Inputs: 2, max. 8 mA “High”: +13V to +30V “Low”: -30V to +3VRelay Outputs: 2, max. 24 VDC @ 1A
LED Indicators STAT: Indicates if system booted up properly or notPWR1: Power 1PWR2: Power 2FAULT: Can be configured to correspond to system alarm, power failure, video loss, or disconnected network
Physical CharacteristicsDimensions (W x H x D): 52.98 x 135 x 105 mm (2.09 x 5.31 x 4.13 in.)Weight: 910 g Installation: DIN-Rail mounting, wall mounting (optional kit)
Power RequirementsInput Voltage: 2 12/24 VDC and 24 VAC power inputs for redundancy
Environmental LimitsOperating Temperature: 0 to 60°C (32 to 140°F)Storage Temperature: -40 to 85°C (-40 to 185°F)Ambient Relative Humidity: 5 to 95% (non-condensing)
www.moxa.com emai l : [email protected] 9-22
Industrial Ethernet Solutions for Control and Automation
9
Video Networking Products
Regulatory Approvals Safety: UL508 EMI: FCC Part 15, CISPR (EN55022) class AEMS: EN61000-4-2 (ESD), level 2
EN61000-4-3 (RS), level 3EN61000-4-4 (EFT), level 3EN61000-4-5 (Surge), level 3EN61000-4-6 (CS), level 2EN61000-4-12 (Oscillatory wave immunity), level 3
Shock: IEC 60068-2-27Freefall: IEC 60068-2-32Vibration: IEC 60068-2-6
Warranty5 years (see www.moxa.com/warranty for details)
Alarm FeaturesAutomatically switch to the video source once an event is triggered
PAN/TILT/ZOOMTransparent PTZ camera control with legacy PTZ controller through the RS-232/422/485 port
SecurityUser level password protection•IP address filtering•
Dimensions (unit = mm)
Dec
od
er
VPort D351
100M
10M
Mounting Kit Rear ViewFront ViewSide View DIN-Rail Kit
VPort D351: 1-channel MJPEG/MPEG4 industrial video decoder, 12/24 VDC and 24 VAC redundant power input, 0 to 60°C
Optional AccessoriesDR-4524: • 45W/2A DIN-Rail 24 VDC power supply, 85 to 264 VAC inputDR-75-24: • 75W/3.2A DIN-Rail 24 VDC power supply, 85 to 264 VAC inputDR-120-24: • 120W/5A DIN-Rail 24 VDC power supply, 88 to 132 VAC/176 to 264 VAC input by switchWK-46: • Wall mounting kitRK-4U:• 4U-high 19” rack mounting kit
Ordering Information
VPort D351
emai l : [email protected] www.moxa.com 9-23
0
9
8
OverviewVideo Netw
orking Products
Modular
Remote I/O
10
12
Media
ConvertersAccessories
11
7
Peer-to-PeerI/O
6
Active Ethernet I/O
5
Wireless
Ethernet
4
3
2
1
Modular
EthernetSwitches
Unmanaged
EthernetSwitches
Rackmount
EthernetSwitches
Managed
EthernetSwitches
OrderingInform
ationVideo Networking Products SoftNVR
SoftNVRAdvanced IP surveillance software for managing up to 64 video channels
Features
Moxa SoftNVR IP surveillance software can manage up to 64 video stream channels generated by VPort series products (not includ-ing VPort 2000 series and VPort 3310) simultaneously. Features include dual monitor display, video analysis, instant alarm, event recording, and video enhancement tools. SoftNVR gives users an advanced video management tool for medium to large video surveillance networking systems.
Up to• 64 channels in one system Dual monitor display capability for •convenient viewing
Video analysis with motion • object, and video loss detection
Instant response for alarm notification• Simple and • user-friendly setup for recording schedule
Multifunction playback system with •intelligent search
Video enhancement tools for image quality •tuning
I/O device integration • Live • viewing from popular web browsers
System RequirementsTotal FPS at CIF 600 or more 480 to 600 240 to 600 120 to 240 less than 120
CPU Intel Core 2 Duo QX6700 Intel Core 2 Duo E6400 Intel Pentium D 930 Intel P4 2.8 GHz Intel P4 2.4 GHz
RAM 2 GB 1 GB 1 GB 512 MB 512 MB
Motherboard Intel 945 or 965 chip, Intel chipset recommended
Display ATI Radeon 9200, nVIDIA GeForce FX-5200, Intel 945 / 965, or above (ATI recommended)
Ethernet 100BaseT or above, Gigabit LAN recommended
Hard Disk 80 GB or above
OS MS Windows 2000/XP Pro SP2/2003
Preliminary
www.moxa.com emai l : [email protected] 9-24
Industrial Ethernet Solutions for Control and Automation
9
Video Networking Products
Expandable and easy-to-use video-over-IP surveillance software
Viewing & playback, anywhere & anytime
Recording & storing over the Ethernet/Internet
Pro
Introduction
Remote access from popular web browsers•Supports 1, 4, 6, 8, 9, 10, 13, 16 camera viewing formats •Maximum of 16 cameras in a system•Synchronized video/audio viewing and recording (for VPort •MPEG4 video servers) Historical playback by time and event•Zoom-in/Zoom-out function for individual cameras when playing •back imagesTake snapshots in playback mode to get JPEG images for printing •or to save as evidenceCan adjust the contrast, brightness, sharpness, blur, and grayscale •of the snapshot image
Moxa SoftDVR™ Pro IP surveillance software is designed for video-
over-IP surveillance systems that use Moxa VPort series video
servers as the distributed video networking solution. With the help of
Moxa SoftDVR™, system integrators can seamlessly integrate other
applications, such as I/O sensors and alarms, with CCTV systems over
an IP-based network.
Recording action can be triggered in round-the-clock mode or •event mode of VMD (Video Motion Detection) and DIRecord video in AVI format• -compatible with popular media playersDynamically adjust recording frame rate over the LAN/Internet to •match the real frame transmit speed, to keep the video synchro-nized with the actual timeRecorded video format can be selected as adjustable FPS MJPEG, •or MPEG4 standard, for VPort MJPEG video serversRecyclable override of hard disk space in FIFO (First-In-First-Out) •sequenceRecorded video files can be stored on a local PC or Windows-•based networked storage server
SoftDVR
™ Pro
emai l : [email protected] www.moxa.com 9-25
0
9
8
OverviewVideo Netw
orking Products
Modular
Remote I/O
10
12
Media
ConvertersAccessories
11
7
Peer-to-PeerI/O
6
Active Ethernet I/O
5
Wireless
Ethernet
4
3
2
1
Modular
EthernetSwitches
Unmanaged
EthernetSwitches
Rackmount
EthernetSwitches
Managed
EthernetSwitches
OrderingInform
ationVideo Networking Products SoftDVR™ Pro
SoftDVR™ Lite bundled free with VPort series video servers
1- to 4-ch (Quad) viewing format; max. 4 cameras•Supports viewing and recording on local PCs•Full image VMD with sensitivity tuning•Schedule jobs for recording•System requirements: •
- MS Windows XP - Intel Pentium 4 , 2.4 GHz HT (Hyper-Threading) or above - 512 MB SDRAM or above - DirectX 9.0C or above - Nvidia GeForce or ATI TNT2 graphics card with 32 MB display memory or above
Ordering Information SoftDVR™ Pro:• CD with SoftDVR™ Pro software, SQL database software, and user’s manual
Items included:
KeyPro(pluginUSBport)•MoxaSoftDVR™ProQuickInstallationGuide•
Administrators can set up the time schedule of remote service and the •recording action for each camera
Schedule jobs for recording and remote service
Area-selectable Video Motion Detection (VMD) function for each camera•Sensitivity tuning for the VMD•Alarm can be triggered by VMD, video lost, communication failure, storage •failure, storage full, DIs, and then sent by email, or trigger relays (DOs), sound, or a PTZ camera to a preset position
Alarm message triggered and sent
Can configure each camera’s name, video quality, and video resolution •separatelySupports PTZ camera controls (same as VPort series video servers’ support •list) Supports Moxa VPort series video servers•Up to 32 users can be added to one system•Supports remote VPort’s firmware upgrade•Can set up the camera view and system operation for each user •Automatically resume viewing and recording after system reboot•Cameras can be managed easily with your own e-map•
Video server configuration & system management
System Requirements
MSWindowsXP •IntelDualCore,2.0GHzorabove•1GBSDRAMorabove •NvidiaGeForceorATITNT2graphiccardwith64MBdisplaymemoryorabove• DirectX 9.0C or above•
www.moxa.com emai l : [email protected] 9-26
Industrial Ethernet Solutions for Control and Automation
9
Video Networking Products
Moxa IVN (Industrial Video Networking) solutions, which include VPort series video servers and SoftDVR™ IP surveillance software, are future-proof, ready-to-use video-over-IP solutions for video surveillance applications. With the growing popularity of IP networks, more and more users need to integrate their video management system with other monitoring and control systems (e.g., SCADA or HMI) to get the benefits of centralization and inter-operation. To
assist third-party developers with this intergration, we are providing Moxa VPort SDK PLUS and VPort SDK to build customized video management systems, or to integrate VPort series products into comprehensive monitoring and control systems.
ActiveX Work Process
API Module Structure
APWindows Register Tree
ActiveX
Request1
Uni-KeyFound & Call
2
Load & Execute
3
* The API of VPort SDK PLUS is not available now, and will be released soon!
Sample codes available
Sample codes available
AP
Direct AccessOptional Direct Access
Internal Usage Relationship
Streaming Receiver AV Decode/Display
Packet Parse
Server Resource
Server Control
Packet Maker
Device Search
VPort SDKUser-friendly software development kits for third-party developers to customize their video-over-IP management system
Introduction
These are easy-to-use CGI commands used with HTML programming for web systems. Users can acquire video images and control VPort series products from their own customized web pages by embedding
these CGI commands into the HTML source code. All of the URL commands are listed in VPort’s user's manual, or a CGI command manual.
ActiveX Control SDKActiveX Control is an OCX component, which uses Microsoft COM (Component Object Model) technology to enable software components to communicate. ActiveX Control is used widely with platforms that support WIN32, IE Plug-in, and Visual Basic, and is also popular in automation system software, such as SCADA. Moxa ActiveX Control SDK is a user-friendly, customized tool for programmers that supports versatile parameters for customized viewing, recording, PTZ camera control, event triggering, and recorded video playback. Moxa ActiveX Control SDK is provided free of charge, and supports VB, VC, and C# developing environments, as well as plug-ins for web applications and automation tools (e.g., SCADA software). Third-party developers who want to use ActiveX SDK can contact a Moxa sales representatives to apply for a free copy.
API SDK For some video management applications, the ActiveX control SDK may not provide users with enough functionality. In this case, users can use the API SDK, which includes a detailed C library, to program their own customized solutions in a Visual C++ or C# environment. The API SDK includes a total of 9 DLL modules. For the time being, the API SDK supports the WIN32, Linux, and WIN CE pocket 2003 platforms.
API SDK is also provided free of charge. However, since the API SDK uses proprietary technology and the programmer must be an experienced, professional C programmer, we are not releasing the API SDK publicly. Third-party developers who would like to use API SDK should contact a Moxa sales representative to apply for a free copy. Some verification is required.
VPort SDK PLUS: Supports VPort 25/354/351/251 and future products
VPort SDK: Supports VPort 2000 series and VPort 3310
URL Commands
VPort SDK
IMC-101G Industrial Gigabit media converter 10-2
IMC-101 Industrial media converter 10-4
IMC-21 Entry-level industrial media converter 10-6
Industrial Media Converters
Industrial Media Converters
10
Industrial Ethernet Solutions for Control and Automation
www.moxa.com emai l : [email protected] 10-2
Industrial Ethernet Solutions for Control and Automation
10
Industrial Media Converters
IMC-101G
IMC-101G Series
IntroductionThe IMC-101G industrial Gigabit media converters are designed to provide reliable and stable 10/100/1000BaseT(X) to SFP media conversion in harsh industrial environments. The IMC-101G’s industrial design is excellent for keeping your industrial automation applications running continuously, and each IMC-101G converter
comes with a relay output warning alarm to help prevent damage and loss. All IMC-101G models are subjected to a 100% burn-in test, and are available in models that support a standard operating temperature range of 0 to 60°C, and an extended operating temperature range of -40 to 75°C.
10/100/1000BaseT(X) and 1000BaseSFP slot supported ›Link Fault Pass-Through (LFP) ›Power failure, port break alarm by relay output ›Redundant power input ›-40 to 75°C operating temperature range (T models) ›Certified to operate in hazardous locations ›
TechnologyStandards: IEEE 802.3 for 10BaseT,
IEEE 802.3u for 100BaseT(X) and 100BaseFX,IEEE 802.3ab for 1000BaseT(X),IEEE 802.3z for 1000BaseSX/LX/LHX/ZX
InterfaceRJ45 Ports: 10/100/1000BaseT(X)Fiber Ports: 1000BaseSFP slotLED Indicators: PWR1, PWR2, FAULT, 10/100M (TP port), 1000M (TP and Fiber port)DIP Switch: Port break alarm mask, Link Fault Pass-Through, Fiber AN/ForceAlarm Contact: One relay output with current carrying capacity of 1A @ 24 VDC
Power RequirementsInput Voltage: 24 VDC (12 to 45 VDC), redundant inputsInput Current (@ 24 V): 0.11AConnection: Removable terminal blockOverload Current Protection: 1.1AReverse Polarity Protection: Present
Physical CharacteristicsCasing: IP30 protection, metal caseDimensions (W x H x D): 53.6 x 135 x 105 mm (2.11 x 5.31 x 4.13 in.)Weight: 630 gInstallation: DIN-Rail mounting, wall mounting (optional kit)
Environmental LimitsOperating Temperature: 0 to 60°C (32 to 140°F), -40 to 75°C (-40 to 167°F) for T modelsStorage Temperature: -40 to 85°C (-40 to 185°F)Ambient Relative Humidity: 5 to 95% (non-condensing)
Regulatory ApprovalsSafety: UL508EMI: FCC Part 15, CISPR (EN55022) class AEMS: EN61000-4-2 (ESD), level 3
EN61000-4-3 (RS), level 3EN61000-4-4 (EFT), level 3EN61000-4-5 (Surge), level 3EN61000-4-6 (CS), level 3EN61000-4-8EN61000-4-11
Shock: IEC 60068-2-27Freefall: IEC 60068-2-32Vibration: IEC 60068-2-6MTBF: 500,000 hrs
Database: Telcordia (Bellcore), GB*Please check Moxa’s website for the most up-to-date status.
Warranty5 years (see www.moxa.com/warranty for details)
Specifications
Industrial Gigabit Ethernet to fiber media converter
Dimensions (unit = mm)
emai l : [email protected] www.moxa.com 10-3
0
10
9
OverviewM
edia Converters
12
Accessories
11
8
Modular
Remote I/O
7
Peer-to-PeerI/O
6
Active Ethernet I/O
5
Wireless
Ethernet
4
3
2
1
OrderingInform
ation
Modular
EthernetSwitches
Unmanaged
EthernetSwitches
Rackmount
EthernetSwitches
Managed
EthernetSwitches
VideoNetworkingProducts
IMC-101GIndustrial Media Converters
Ordering Information
35
105 53.6
Mounting Kit Rear ViewFront ViewSide View DIN-Rail Kit
IMC-101G: • Industrial 10/100/1000BaseT(X) to 1000BaseSX/LX/LHX/ZX media converter, 0 to 60°C
IMC-101G-T: • Industrial 10/100/1000BaseT(X) to 1000BaseSX/LX/LHX/ZX media converter, -40 to 75°C
* IMC-101G series supports 1 1000BaseSFP slot. Please see page 2-23 for the product information of SFP-1G series Gigabit Ethernet SFP modules.
Optional AccessoriesDR-4524:• 45W/2A DIN-Rail 24 VDC power supply, 85 to 264 VAC inputDR-75-24:• 75W/3.2A DIN-Rail 24 VDC power supply, 85 to 264 VAC inputDR-120-24:• 120W/5A DIN-Rail 24 VDC power supply, 88 to 132 VAC/176 to 264 VAC input by switchWK-46:• Wall mounting kitRK-4U:• 4U-high 19” rack mounting kit
www.moxa.com emai l : [email protected] 10-4
Industrial Ethernet Solutions for Control and Automation
10
Industrial Media Converters
IMC-101 Series
IntroductionThe IMC-101 industrial media converters provide industrial grade media conversion between 10/100BaseT(X) and 100BaseFX (SC/ST connectors). The IMC-101’s reliable industrial design is excellent for keeping your industrial automation applications running continuously, and each IMC-101 converter comes with a relay output warning alarm to help prevent damage and loss. The IMC-101 media converters are certified for harsh industrial environments, such as in hazardous
locations (Class 1, Division 2/Zone 2, DNV, and GL Certification), and comply with FCC, UL, and CE standards. The IMC-101 series is available with models that support an operating temperature of 0 to 60˚C, and an extended operating temperature of -40 to 75˚C. All IMC-101 series are subjected to a 100% burn-in test.
10/100BaseT(X) auto-negotiation and auto-MDI/MDI-X › Link Fault Pass-Through (LFP) › Power failure, port break alarm by relay output › Redundant power inputs ›-40 to 75°C operating temperature range (T models) › Certified to operate in hazardous locations (Class 1, Div. 2/Zone 2) ›
IMC-101
Power RequirementsInput Voltage: 24 VDC (12 to 48 VDC), redundant inputsInput Current (@ 24 V): 0.16AConnection: Removable terminal blockOverload Current Protection: 1.1AReverse Polarity Protection: Present
Physical CharacteristicsCasing: IP30 protection, metal caseDimensions (W x H x D): 53.6 x 135 x 105 mm (2.11 x 5.31 x 4.13 in.)Weight: 630 gInstallation: DIN-Rail mounting, wall mounting (optional kit)
Environmental LimitsOperating Temperature: 0 to 60°C (32 to 140°F), -40 to 75°C (-40 to 167°F) for T modelsStorage Temperature: -40 to 85°C (-40 to 185°F)Ambient Relative Humidity: 5 to 95% (non-condensing)
Regulatory ApprovalsSafety: UL508, UL60950-1, CSA C22.2 No. 60950-1, EN60950-1Hazardous Location: UL/cUL Class1, Division 2, Groups A, B, C, and D; ATEX Class1, Zone 2, Ex nC IIC (IMC-101-M-ST and IMC-101-S-SC-80 pending)Maritime: DNV, GLEMI: FCC Part 15, CISPR (EN55022) class AEMS: EN61000-4-2 (ESD), level 3
EN61000-4-3 (RS), level 3EN61000-4-4 (EFT), level 3
TechnologyStandards: IEEE 802.3 for 10BaseT,
IEEE 802.3u for 100BaseT(X) and 100BaseFX
InterfaceRJ45 Ports: 10/100BaseT(X)Fiber Ports: 100BaseFX (SC/ST connectors)LED Indicators: PWR1, PWR2, FAULT, 10/100M (TP port), 100M (Fiber port), FDX/COL (Fiber port)DIP Switch: 100BaseFX Full/Half duplex selection, port break alarm maskAlarm Contact: One relay output with current carrying capacity of 1A @ 24 VDC
Optical Fiber
Specifications
100BaseFX
Multi Mode Single ModeSingle Mode,
80 kmWavelength 1300 nm 1310 nm 1550 nmMax. TX -10 dBm 0 dBm 0 dBm
Min. TX -20 dBm -5 dBm -5 dBm
RX Sensitivity -32 dBm -34 dBm -34 dBm
Link Budget 12 dB 29 dB 29 dB
Typical Distance 5 km a
4 km b 40 km c 80 km d
Saturation -6 dBm -3 dBm -3 dBm
a. 50/125 μm, 800 MHz*km fiber optic cableb. 62.5/125 μm, 500 MHz*km fiber optic cablec. 9/125 μm, 3.5 PS/(nm*km) fiber optic cabled. 9/125 μm, 19 PS/(nm*km) fiber optic cable
Industrial 10/100BaseT(X) to 100BaseFX media converter
emai l : [email protected] www.moxa.com 10-5
0
10
9
OverviewM
edia Converters
12
Accessories
11
8
Modular
Remote I/O
7
Peer-to-PeerI/O
6
Active Ethernet I/O
5
Wireless
Ethernet
4
3
2
1
OrderingInform
ation
Modular
EthernetSwitches
Unmanaged
EthernetSwitches
Rackmount
EthernetSwitches
Managed
EthernetSwitches
VideoNetworkingProducts
IMC-101Industrial Media Converters
Dimensions (unit = mm)
Ordering Information
35
105 53.6
Mounting Kit Rear ViewFront ViewDIN-Rail KitSide View
IMC-101-M-SC:• Industrial 10/100BaseT(X) to 100BaseFX media converter, multi mode, SC connector, 0 to 60°CIMC-101-M-ST:• Industrial 10/100BaseT(X) to 100BaseFX media converter, multi mode, ST connector, 0 to 60°CIMC-101-S-SC:• Industrial 10/100BaseT(X) to 100BaseFX media converter, single mode, SC connector, 40 km, 0 to 60°CIMC-101-S-SC-80:• Industrial 10/100BaseT(X) to 100BaseFX media converter, single mode, SC connector, 80 km, 0 to 60°CIMC-101-M-SC-T: • Industrial 10/100BaseT(X) to 100BaseFX media converter, multi mode, SC connector, -40 to 75°CIMC-101-M-ST-T:• Industrial 10/100BaseT(X) to 100BaseFX media converter, multi mode, ST connector, -40 to 75°CIMC-101-S-SC-T:• Industrial 10/100BaseT(X) to 100BaseFX media converter, single mode, SC connector, 40 km, -40 to 75°CIMC-101-S-SC-80-T: • Industrial 10/100BaseT(X) to 100BaseFX media converter, single mode, SC connector, 80 km, -40 to 75°C
Optional AccessoriesDR-4524:• 45W/2A DIN-Rail 24 VDC power supply, 85 to 264 VAC inputDR-75-24:• 75W/3.2A DIN-Rail 24 VDC power supply, 85 to 264 VAC inputDR-120-24: • 120W/5A DIN-Rail 24 VDC power supply, 88 to 132 VAC/176 to 264 VAC input by switchWK-46:• Wall mounting kitRK-4U:• 4U-high 19” rack mounting kit
EN61000-4-5 (Surge), level 3 EN61000-4-6 (CS), level 3 EN61000-4-8
EN61000-4-11Shock: IEC 60068-2-27Freefall: IEC 60068-2-32
Vibration: IEC 60068-2-6MTBF: 401,000 hrs Database: MIL-HDBK-217F, GB 25˚C*Please check Moxa’s website for the most up-to-date status.
Warranty5 years (see www.moxa.com/warranty for details)
www.moxa.com emai l : [email protected] 10-6
Industrial Ethernet Solutions for Control and Automation
10
Industrial Media Converters
IMC-21 Series
IntroductionThe IMC-21 series are entry-level 10/100BaseT(X) to 100BaseFX and 10BaseT to 10BaseFL media converters designed to provide reliable and stable operation in harsh industrial environments. The IMC-21 is a cost-effective solution that runs on either a 12 to 45 VDC power input or 18 to 30 VAC power input. The IMC-21 can operate
reliably in temperatures ranging from -10 to 60°C, and the rugged hardware design ensures that your Ethernet equipment can withstand demanding industrial conditions. The IMC-21 is easy to mount on a DIN-Rail or in distribution boxes.
Multi mode, single mode with SC or ST fiber connector ›Link Fault Pass-Through (LFP) ›Power inputs: 12 to 45 VDC, 18 to 30 VAC (47-63 Hz) ›-10 to 60°C operating temperature range ›DIP Switch to select FDX/HDX/10/100/Auto/Force ›
IMC-21
Min. TX Output: 10BaseFL: -16 dBm 100BaseFX (Multi mode): -20 dBm 100BaseFX (Single mode): -5 dBmMax. TX Output: 10BaseFL: -7 dBm 100BaseFX (Multi mode): -14 dBm 100BaseFX (Single mode): 0 dBmRX Sensitivity: 10BaseFL: -34.1 dBm 100BaseFX (Multi mode): -34 to -30 dBm 100BaseFX (Single mode): -36 to -32 dBm
Power RequirementsInput Voltage: 12 to 45 VDC, 18 to 30 VAC (47-63 Hz)Power Consumption (@ 24 V): 0.15AConnection: Removable 3-contact terminal block Overload Current Protection: 1.1AReverse Polarity Protection: Present
Physical CharacteristicsCasing: IP30 protection, plastic case Dimensions (W x H x D): 25 x 100 x 74 mm (0.98 x 3.93 x 2.91 in.)Weight: 125 gInstallation: DIN-Rail mounting
Environmental LimitsOperating Temperature: -10 to 60°C (14 to 140°F) Storage Temperature: -40 to 70°C (-40 to 158°F)Ambient Relative Humidity: 5 to 95% (non-condensing)
TechnologyStandards: IEEE 802.3 for 10BaseT,
IEEE 802.3u for 100BaseT(X) and 100BaseFX,IEEE 802.3x for Flow Control
InterfaceRJ45 Ports:
IMC-21-M-SC, IMC-21-M-ST, IMC-21-S-SC: 10/100BaseT(X)•IMC-21-M-ST-FL: 10BaseT•
Fiber Ports:IMC-21-M-SC, IMC-21-M-ST, IMC-21-S-SC: 100BaseFX (SC/ST •connectors)IMC-21-M-ST-FL: 10BaseFL (ST connector only) •
LED Indicators:IMC-21-M-SC, IMC-21-M-ST, IMC-21-S-SC: Power, 10/100M (TP •port), 100M (fiber port), FDX/COL (fiber port)IMC-21-M-ST-FL: Power, LNK/ACT (fiber port), LNK/ACT (TP port)•
DIP Switch: IMC-21-M-SC, IMC-21-M-ST, IMC-21-S-SC: •- 10/100M (TP port), Half/Full mode (TP and FX ports), Force/Auto
mode (TP port), Link Fault Pass-Through (LFP)IMC-21-M-ST-FL: •- MDI/MDI-X (TP port), Half/Full mode (TP port)
Optical FiberDistance: 10BaseFL: 2 km, 820 nm
100BaseFX (Multi mode): 5 km, 1300 nm 100BaseFX (Single mode): 40 km, 1310 nm
Specifications
Entry-level industrial 10/100BaseT(X) to 100BaseFX and 10BaseT to 10BaseFL media converter
emai l : [email protected] www.moxa.com 10-7
0
10
9
OverviewM
edia Converters
12
Accessories
11
8
Modular
Remote I/O
7
Peer-to-PeerI/O
6
Active Ethernet I/O
5
Wireless
Ethernet
4
3
2
1
OrderingInform
ation
Modular
EthernetSwitches
Unmanaged
EthernetSwitches
Rackmount
EthernetSwitches
Managed
EthernetSwitches
VideoNetworkingProducts
IMC-21Industrial Media Converters
Dimensions (unit = mm)
Ordering Information
Rear ViewFront ViewDIN-Rail KitSide View Bottom ViewTop View
25 25 25 25
25 25
10/100M 10M
10/100M 10M
Regulatory ApprovalsSafety: UL508, UL60950-1, CSA C22.2 No. 60950-1, EN60950-1 EMI: FCC Part 15, CISPR (EN55022) class A EMS: EN61000-4-2 (ESD)
EN61000-4-3 (RS)EN61000-4-4 (EFT)EN61000-4-5 (Surge)EN61000-4-6 (CS)
Shock: IEC 60068-2-27Freefall: IEC 60068-2-32Vibration: IEC 60068-2-6MTBF: 353,000 hrs Database: MIL-HDBK-217F, GB 25˚C
Warranty5 years (see www.moxa.com/warranty for details)
IMC-21-M-SC:• Industrial 10/100BaseT(X) to 100BaseFX media converter, multi mode, SC connector, -10 to 60°C IMC-21-M-ST:• Industrial 10/100BaseT(X) to 100BaseFX media converter, multi mode, ST connector, -10 to 60°C IMC-21-S-SC:• Industrial 10/100BaseT(X) to 100BaseFX media converter, single mode, SC connector, -10 to 60°C IMC-21-M-ST-FL:• Industrial 10BaseT to 10BaseFL media converter, multi mode, ST connector, -10 to 60°C
Optional Accessories DR-4524:• 45W/2A DIN-Rail 24 VDC power supply, 85 to 264 VAC inputDR-75-24:• 75W/3.2A DIN-Rail 24 VDC power supply, 85 to 264 VAC inputDR-120-24: • 120W/5A DIN-Rail 24 VDC power supply, 88 to 132 VAC/176 to 264 VAC input by switchRK-4U• : 4U-high 19” rack mounting kit
ABC-01
Features
RS-232 RJ45 console port connection•Complete configuration storage for Moxa’s managed Ethernet •switches and wireless product (AWK-3121)Automatic loading of system configuration after system reboots•
Manual loading and saving of system configuration through web •consolePortable low-power design that requires no power supply•CE and FCC approval•
Automatic Backup Configuration, ABC-01 can save and load the configuration of Moxa’s managed Ethernet switches and wireless product (AWK-3121) via RS-232 console port. ABC-01 thus makes it easier to manage the backup of system parameters or replacement of
an Ethernet switch and wireless product. With the assistance of the ABC-01, users can quickly re-install a substitute product (of the same model) and/or recover the entire system configuration, including IP address, if any failure occurs.
Introduction
Operation Connectors: RS-232 RJ45 portPower Requirement: 3 to 5 VDC, power input via RS-232 RTSConfiguration: via Moxa managed Ethernet switches’ and wireless product’s (AWK-3121) web console
Physical CharacteristicsCasing: PVC molding, IP40Dimension (W x H x D): 32.5 x 97 x 12 mm (1.28 x 3.82 x 0.47 in.)Weight: 50 gInstallation: M4 screw (< 4 mm)Cable Length: 35 cm, including connectors
Environmental LimitsOperating Temperature: 0 to 60°C (32 to 140°F)Storage Temperature: -20 to 70°C (-4 to 158°F)Ambient Relative Humidity: 5 to 95 % (non-condensing)
Regulatory ApprovalsEMI: FCC Part 15, CISPR (EN55022) class AEMS: EN61000-4-2 (ESD), level 3
EN61000-4-3 (RS), level 3EN61000-4-4 (EFT), level 3EN61000-4-5 (Surge), level 3EN61000-4-6 (CS), level 3
Warranty 5 years (see www.moxa.com/warranty for details)
Specifications
Ordering Information
ABC-01: RS-232 RJ45-based automatic backup configurator, 0 to 60˚C
www.moxa.com emai l : [email protected] 11-1
Industrial Ethernet Solutions for Control and Automation
11
Accessories
Industrial RS-232 RJ45-based automatic configuration backup solution
Reduce system down time without extra power input ›Plug-n-Play system backup and restoration ›Front notes for identification ›Compact, rugged and reliable design ›Support Moxa’s managed Ethernet switches and wireless ›product (AWK-3121)
ABC-01
DIN-Rail Power Supplies
Model DR-4524 DR-75-24 DR-120-24 DR-75-48 DR-120-48
DIN-Rail 24/48 VDC power supplies
DimensionsUnit: mm (W x H x D)
78 x 93 x 67 mm 55.5 x 125.2 x 100 mm 65.5 x 125.2 x 100 mm 55.5 x 125.2 x 100 mm 65.5 x 125.2 x 100 mm
Power 45W 75W 120W 75W 120W
Input
85-264 VAC (47-63 Hz) or 120-370 VDC
88-132 VAC/176-264 VAC (47-63 Hz)
by switch or 248-370 VDC
85-264 VAC (47-63 Hz)
or 120-370 VDC
88-132 VAC/176-264 VAC (47-63 Hz)
by switch or 248-370 VDC
Output 48W, 24 VDC, 0-2A 76.8W, 24 VDC, 0-3.2A 120W, 24 VDC, 0-5A 76.8W, 48 VDC, 0-1.6A 120W, 48 VDC, 0-2.5A
Over voltage protection
115-135% of rated output voltage 29-33V
Overload protection 105-150%
Type Constant current limiting
Reset Auto recovery
Inrush current 30A/115V or 60A/230V
Weight 400 g 550 g 650 g 550 g 650 g
Working temp. andrelative humidity
-10 to 50˚C to 90% RH -10 to 60˚C, 20 to 90% RH
Warranty 3 years
Safety standards T V EN60950-1, UL508 approved
EMC standardsCISPR22 (EN55022) class B, EN61000-4-2, 3, 4, 5, 6, 8, 11,
ENV50204, EN61000-3-2, -3, EN50082-2
Ordering Information
DR-4524:• 45W/2A DIN-Rail 24 VDC power supply with universal 85 to 264 VAC inputDR-75-24:• 75W/3.2A DIN-Rail 24 VDC power supply with universal 85 to 264 VAC inputDR-120-24:• 120W/5A DIN-Rail 24 VDC power supply with 88 to 132 VAC/176 to 264 VAC input by switchDR-75-48: • 75W/1.6A DIN-Rail 48 VDC power supply with universal 85 to 264 VAC inputDR-120-48: • 120W/2.5A DIN-Rail 48 VDC power supply with 88 to 132 VAC/176 to 264 VAC input by switch
93(36.6)
67(26.3)
78(30.7)
125.2(49.3)
100(39.4)55.5(21.8)
125.2(49.3)
100(39.4)65.5(25.8)
125.2(49.3)
100(39.4)55.5(21.8)
125.2(49.3)
100(39.4)65.5(25.8)
DIN-Rail 24/48 VDC Power Supplies
emai l : [email protected] www.moxa.com 11-2
0
11
10
OverviewAccessories
Media
Converters
12
Ordering Inform
ation
9
8
Modular
Remote I/O
7
Peer-to-PeerI/O
6
Active Ethernet I/O
5
Wireless
Ethernet
4
3
2
1
Modular
EthernetSwitches
Unmanaged
EthernetSwitches
Rackmount
EthernetSwitches
Managed
EthernetSwitches
VideoNetworkingProducts
DIN-Rail Power SuppliesAccessories
Model WK-32 WK-46
Mounting Kit
Matched Products
Modular Ethernet Switch: EDS-828/728 series Managed Ethernet Switch: EDS-G509/500A/400A and PX-1510 seriesUnmanaged Ethernet Switch: EDS-G308/P308/316/309/308/305 seriesWireless AP/Bridge/AP Client: AWK-3121/1100 seriesMedia Converter: IMC-101G/101 seriesVideo Server: VPort 354/351/3310/D351 series
Dimensions(W x H x D)
30.3 x 140 x 12.3 mm 51.6 x 66.8 x 1 mm
Model RK-4U DK-M12-305 DK-35A
Mounting Kit
Matched Products
Managed Ethernet Switch: EDS-G509/500A/400A and PX-1510 seriesUnmanaged Ethernet Switch: EDS-G308/P308/316/309/308/305/200A/200 seriesWireless AP/Bridge/AP Client: AWK-3121/1100 seriesMedia Converter: IMC-101G/101/21 seriesVideo Server: VPort 354/351/3310/D351 series
Unmanaged Ethernet Switch:EDS-305-M12 series
Video Server:VPort 251/2141 series
Dimensions(W x H x D)
481 x 177.8 x 202.4 mm 60 x 125 x 12.8 mm 42.5 x 10 x 19.34 mm
Mounting Kits
Mounting Kits
Wall mounting, rack mounting, and DIN-Rail mounting kits
Ordering Information WK-32: • Wall mounting kit for EDS-828/728 seriesWK-46: • Wall mounting kitRK-4U: • 4U-high 19” rack mounting kit
DK-M12-305: • DIN-Rail mounting kit for EDS-305-M12 seriesDK-35A: • DIN-Rail mounting kit for VPort 251/2141 series
30.3
140
30.3
12.3 66
.8
51.6
177.
8
202.
4
440
481
60
125
412.8
6.2
19.34
15.68
42.5
www.moxa.com emai l : [email protected] 11-3
Industrial Ethernet Solutions for Control and Automation
11
AccessoriesM
ounting Kits
Ordering Information
Features
Multi-mode Optical Fiber Patch Cords
SC to SC Connectors
ST to ST Connectors
SC to ST Connectors
Optical fiber patch cords, full duplex multi-mode, 62.5 microns
Optical fiber patch cords, full duplex multi-mode, 62.5 microns
Optical fiber patch cords, full duplex multi-mode, 62.5 microns
These fiber optic patch cords can be used with the following products:Multi-mode models of industrial Ethernet switches, VPort 354/VPort 351 industrial video encoders, and industrial media converters
Standard multi-mode (graded index)•Duplex for TX/RX, cable is joined together in lamp-cord fashion for easy separation when installing•62.5/125 micron core fiber•Ceramic ferrules offer a typical insertion loss of • ≤ 0.5 dBOperating temperature: -20 to 75• °C (-4 to 167°F)Storage temperature: -40 to 85• °C (-40 to 185°F)Standards: IEC607932-2•Wavelength: 850/1300 nm•
Model Name Cable Length
PA-MM(62.5)-2SC2SC-1M 1 meter
PA-MM(62.5)-2SC2SC-3M 3 meters
PA-MM(62.5)-2SC2SC-5M 5 meters
PA-MM(62.5)-2SC2SC-10M 10 meters
Model Name Cable Length
PA-MM(62.5)-2ST2ST-1M 1 meter
PA-MM(62.5)-2ST2ST-3M 3 meters
PA-MM(62.5)-2ST2ST-5M 5 meters
PA-MM(62.5)-2ST2ST-10M 10 meters
Model Name Cable Length
PA-MM(62.5)-2SC2ST-1M 1 meter
PA-MM(62.5)-2SC2ST-3M 3 meters
PA-MM(62.5)-2SC2ST-5M 5 meters
PA-MM(62.5)-2SC2ST-10M 10 meters
emai l : [email protected] www.moxa.com 11-4
0
11
10
OverviewAccessories
Media
Converters
12
Ordering Inform
ation
9
8
Modular
Remote I/O
7
Peer-to-PeerI/O
6
Active Ethernet I/O
5
Wireless
Ethernet
4
3
2
1
Modular
EthernetSwitches
Unmanaged
EthernetSwitches
Rackmount
EthernetSwitches
Managed
EthernetSwitches
VideoNetworkingProducts
Multi-mode Optical Fiber Patch CordsAccessories
EDS-828
EDS-82810GLayer 3 modular managed Ethernet switch system with 6 slots for 4-port fast Ethernet interface modules and 2 slots for 2-port Gigabit interface modules, up to 24+4G ports, 0 to 60°C
NOTE: See the IM series ordering information for available modules.
EDS-728
EDS-72810GModular managed Ethernet switch system with 6 slots for 4-port fast Ethernet interface modules and 2 slots for 2-port Gigabit interface modules, up to 24+4G ports, 0 to 60°C
NOTE: See the IM series ordering information for available modules.
IM Series Interface Modules
IM-2GTX Gigabit Ethernet interface module with 2 10/100/1000BaseT(X) ports, 0 to 60°C
IM-2GSFPGigabit Ethernet interface module with 2 1000BaseSFP slots, 0 to 60°C (see the SFP-1G series ordering information for available SFP Gigabit Ethernet modules)
IM-4TX Fast Ethernet interface module with 4 10/100BaseT(X) ports, 0 to 60°C
IM-4MSC Fast Ethernet interface module with 4 100BaseFX multi-mode ports with SC connectors, 0 to 60°C
IM-4MST Fast Ethernet interface module with 4 100BaseFX multi-mode ports with ST connectors, 0 to 60°C
IM-2MSC/2TX Fast Ethernet interface module with 2 100BaseFX multi-mode ports with SC connectors, and 2 10/100BaseT(X) ports, 0 to 60°C
IM-2MST/2TX Fast Ethernet interface module with 2 100BaseFX multi-mode ports with ST connectors, and 2 10/100BaseT(X) ports, 0 to 60°C
IM-4SSC Fast Ethernet interface module with 4 100BaseFX single-mode ports with SC connectors, 0 to 60°C
IM-2SSC/2TX Fast Ethernet interface module with 2 100BaseFX single-mode ports with SC connectors, and 2 10/100BaseT(X) ports, 0 to 60°C
IM-1LSC/3TX Fast Ethernet interface module with 1 100BaseFX single-mode port with SC connector for 80 km transmission, and 3 10/100BaseT(X) ports, 0 to 60°C
(Gigabit) Managed Ethernet SwitchesEDS-G509 Series
EDS-G509Industrial full Gigabit managed Ethernet switch with 4 10/100/1000BaseT(X) ports, and 5 10/100/1000BaseT(X) or 1000BaseSFP slot combo ports, 0 to 60°C
EDS-G509-TIndustrial full Gigabit managed Ethernet switch with 4 10/100/1000BaseT(X) ports, and 5 10/100/1000BaseT(X) or 1000BaseSFP slot combo ports, -40 to 75°C
EDS-518A Series
EDS-518A Managed Gigabit Ethernet switch with 16 10/100BaseT(X) ports, and 2 10/100/1000BaseT(X) or 1000BaseSFP slot combo ports, 0 to 60°C
EDS-518A-MM-SCManaged Gigabit Ethernet switch with 14 10/100BaseT(X) ports, 2 100BaseFX multi-mode ports with SC connectors, and 2 10/100/1000BaseT(X) or 1000BaseSFP slot combo ports, 0 to 60°C
EDS-518A-MM-STManaged Gigabit Ethernet switch with 14 10/100BaseT(X) ports, 2 100BaseFX multi-mode ports with ST connectors, and 2 10/100/1000BaseT(X) or 1000BaseSFP slot combo ports, 0 to 60°C
EDS-518A-SS-SCManaged Gigabit Ethernet switch with 14 10/100BaseT(X) ports, 2 100BaseFX single-mode ports with SC connectors, and 2 10/100/1000BaseT(X) or 1000BaseSFP slot combo ports, 0 to 60°C
EDS-518A-SS-SC-80Managed Gigabit Ethernet switch with 14 10/100BaseT(X) ports, 2 100BaseFX single-mode ports with SC connectors for 80 km transmission, and 2 10/100/1000BaseT(X) or 1000BaseSFP slot combo ports, 0 to 60°C
EDS-518A-T Managed Gigabit Ethernet switch with 16 10/100BaseT(X) ports, and 2 10/100/1000BaseT(X) or 1000BaseSFP slot combo ports, -40 to 75°C
EDS-518A-MM-SC-TManaged Gigabit Ethernet switch with 14 10/100BaseT(X) ports, 2 100BaseFX multi-mode ports with SC connectors, and 2 10/100/1000BaseT(X) or 1000BaseSFP slot combo ports, -40 to 75°C
EDS-518A-MM-ST-TManaged Gigabit Ethernet switch with 14 10/100BaseT(X) ports, 2 100BaseFX multi-mode ports with ST connectors, and 2 10/100/1000BaseT(X) or 1000BaseSFP slot combo ports, -40 to 75°C
EDS-518A-SS-SC-TManaged Gigabit Ethernet switch with 14 10/100BaseT(X) ports, 2 100BaseFX single-mode ports with SC connectors, and 2 10/100/1000BaseT(X) or 1000BaseSFP slot combo ports, -40 to 75°C
NOTE: See the SFP-1G series ordering information for available SFP Gigabit Ethernet modules.
Gigabit Modular Managed Ethernet Switches
EDS-510A Series
EDS-510A-3GT Managed Gigabit Ethernet switch with 7 10/100BaseT(X) ports, and 3 10/100/1000BaseT(X) ports, 0 to 60°C
EDS-510A-1GT2SFPManaged Gigabit Ethernet switch with 7 10/100BaseT(X) ports, 1 10/100/1000BaseT(X) port, and 2 1000BaseSFP slots for adding SFP-1G series Gigabit Ethernet modules, 0 to 60°C
EDS-510A-3SFPManaged Gigabit Ethernet switch with 7 10/100BaseT(X) ports, and 3 1000BaseSFP slots for adding SFP-1G series Gigabit Ethernet modules, 0 to 60°C
EDS-510A-3GT-T Managed Gigabit Ethernet switch with 7 10/100BaseT(X) ports, and 3 10/100/1000BaseT(X) ports, -40 to 75°C
Industrial Ethernet Switches
www.moxa.com emai l : [email protected] 12-1
Industrial Ethernet Solutions for Control and Automation
12
AppendixProduct O
rdering Information
EDS-510A-1GT2SFP-TManaged Gigabit Ethernet switch with 7 10/100BaseT(X) ports, 1 10/100/1000BaseT(X) port, and 2 1000BaseSFP slots for adding SFP-1G series Gigabit Ethernet modules, -40 to 75°C
EDS-510A-3SFP-TManaged Gigabit Ethernet switch with 7 10/100BaseT(X) ports, and 3 1000BaseSFP slots for adding SFP-1G series Gigabit Ethernet modules, -40 to 75°C
NOTE: See the SFP-1G series ordering information for available SFP Gigabit Ethernet modules.
EDS-516A Series
EDS-516A Managed Ethernet switch with 16 10/100BaseT(X) ports, 0 to 60°C
EDS-516A-MM-SC Managed Ethernet switch with 14 10/100BaseT(X) ports, and 2 100BaseFX multi-mode ports with SC connectors, 0 to 60°C
EDS-516A-MM-ST Managed Ethernet switch with 14 10/100BaseT(X) ports, and 2 100BaseFX multi-mode ports with ST connectors, 0 to 60°C
EDS-516A-T Managed Ethernet switch with 16 10/100BaseT(X) ports, -40 to 75°C
EDS-516A-MM-SC-T Managed Ethernet switch with 14 10/100BaseT(X) ports, and 2 100BaseFX multi-mode ports with SC connectors, -40 to 75°C
EDS-516A-MM-ST-T Managed Ethernet switch with 14 10/100BaseT(X) ports, and 2 100BaseFX multi-mode ports with ST connectors, -40 to 75°C
EDS-508A Series
EDS-508A Managed Ethernet switch with 8 10/100BaseT(X) ports, 0 to 60°C
EDS-508A-MM-SC Managed Ethernet switch with 6 10/100BaseT(X) ports, and 2 100BaseFX multi-mode ports with SC connectors, 0 to 60°C
EDS-508A-MM-ST Managed Ethernet switch with 6 10/100BaseT(X) ports, and 2 100BaseFX multi-mode ports with ST connectors, 0 to 60°C
EDS-508A-SS-SC Managed Ethernet switch with 6 10/100BaseT(X) ports, and 2 100BaseFX single-mode ports with SC connectors, 0 to 60°C
EDS-508A-SS-SC-80 Managed Ethernet switch with 6 10/100BaseT(X) ports, and 2 100BaseFX single-mode ports with SC connectors for 80 km transmission, 0 to 60°C
EDS-508A-T Managed Ethernet switch with 8 10/100BaseT(X) ports, -40 to 75°C
EDS-508A-MM-SC-T Managed Ethernet switch with 6 10/100BaseT(X) ports, and 2 100BaseFX multi-mode ports with SC connectors, -40 to 75°C
EDS-508A-MM-ST-T Managed Ethernet switch with 6 10/100BaseT(X) ports, and 2 100BaseFX multi-mode ports with ST connectors, -40 to 75°C
EDS-508A-SS-SC-T Managed Ethernet switch with 6 10/100BaseT(X) ports, and 2 100BaseFX single-mode ports with SC connectors, -40 to 75°C
EDS-508A-SS-SC-80-T Managed Ethernet switch with 6 10/100BaseT(X) ports, and 2 100BaseFX single-mode ports with SC connectors for 80 km transmission, -40 to 75°C
EDS-505A Series
EDS-505A Managed Ethernet switch with 5 10/100BaseT(X) ports, 0 to 60°C
EDS-505A-MM-SC Managed Ethernet switch with 3 10/100BaseT(X) ports, and 2 100BaseFX multi-mode ports with SC connectors, 0 to 60°C
EDS-505A-MM-ST Managed Ethernet switch with 3 10/100BaseT(X) ports, and 2 100BaseFX multi-mode ports with ST connectors, 0 to 60°C
EDS-505A-SS-SC Managed Ethernet switch with 3 10/100BaseT(X) ports, and 2 100BaseFX single-mode ports with SC connectors, 0 to 60°C
EDS-505A-SS-SC-80 Managed Ethernet switch with 3 10/100BaseT(X) ports, and 2 100BaseFX single-mode ports with SC connectors for 80 km transmission, 0 to 60°C
EDS-505A-T Managed Ethernet switch with 5 10/100BaseT(X) ports, -40 to 75°C
EDS-505A-MM-SC-T Managed Ethernet switch with 3 10/100BaseT(X) ports, and 2 100BaseFX multi-mode ports with SC connectors, -40 to 75°C
EDS-505A-MM-ST-T Managed Ethernet switch with 3 10/100BaseT(X) ports, and 2 100BaseFX multi-mode ports with ST connectors, -40 to 75°C
EDS-505A-SS-SC-T Managed Ethernet switch with 3 10/100BaseT(X) ports, and 2 100BaseFX single-mode ports with SC connectors, -40 to 75°C
EDS-408A Series
EDS-408A Entry-level managed Ethernet switch with 8 10/100BaseT(X) ports, 0 to 60°C
EDS-408A-MM-SC Entry-level managed Ethernet switch with 6 10/100BaseT(X) ports, and 2 100BaseFX multi-mode ports with SC connectors, 0 to 60°C
EDS-408A-MM-ST Entry-level managed Ethernet switch with 6 10/100BaseT(X) ports, and 2 100BaseFX multi-mode ports with ST connectors, 0 to 60°C
EDS-408A-SS-SC Entry-level managed Ethernet switch with 6 10/100BaseT(X) ports, and 2 100BaseFX single-mode ports with SC connectors, 0 to 60°C
EDS-408A-T Entry-level managed Ethernet switch with 8 10/100BaseT(X) ports, -40 to 75°C
EDS-408A-MM-SC-T Entry-level managed Ethernet switch with 6 10/100BaseT(X) ports, and 2 100BaseFX multi-mode ports with SC connectors, -40 to 75°C
EDS-408A-MM-ST-T Entry-level managed Ethernet switch with 6 10/100BaseT(X) ports, and 2 100BaseFX multi-mode ports with ST connectors, -40 to 75°C
EDS-408A-SS-SC-T Entry-level managed Ethernet switch with 6 10/100BaseT(X) ports, and 2 100BaseFX single-mode ports with SC connectors, -40 to 75°C
EDS-405A Series
EDS-405A Entry-level managed Ethernet switch with 5 10/100BaseT(X) ports, 0 to 60°C
EDS-405A-MM-SC Entry-level managed Ethernet switch with 3 10/100BaseT(X) ports, and 2 100BaseFX multi-mode ports with SC connectors, 0 to 60°C
EDS-405A-MM-ST Entry-level managed Ethernet switch with 3 10/100BaseT(X) ports, and 2 100BaseFX multi-mode ports with ST connectors, 0 to 60°C
EDS-405A-SS-SC Entry-level managed Ethernet switch with 3 10/100BaseT(X) ports, and 2 100BaseFX single-mode ports with SC connectors, 0 to 60°C
EDS-405A-T Entry-level managed Ethernet switch with 5 10/100BaseT(X) ports, -40 to 75°C
EDS-405A-MM-SC-T Entry-level managed Ethernet switch with 3 10/100BaseT(X) ports, and 2 100BaseFX multi-mode ports with SC connectors, -40 to 75°C
EDS-405A-MM-ST-T Entry-level managed Ethernet switch with 3 10/100BaseT(X) ports, and 2 100BaseFX multi-mode ports with ST connectors, -40 to 75°C
EDS-405A-SS-SC-T Entry-level managed Ethernet switch with 3 10/100BaseT(X) ports, and 2 100BaseFX single-mode ports with SC connectors, -40 to 75°C
emai l : [email protected] www.moxa.com 12-2
0
12
10
OverviewOrdering Inform
ation M
edia Converters
9
8
Modular
Remote I/O
7
Peer-to-PeerI/O
6
Active Ethernet I/O
5
Wireless
Ethernet
4
3
2
1
VideoNetworkingProducts
Modular
EthernetSwitches
Unmanaged
EthernetSwitches
Rackmount
EthernetSwitches
Managed
EthernetSwitches
11
AccessoriesAppendix Product Ordering Information
EDS-G308 Series
EDS-G308 Unmanaged full Gigabit Ethernet switch with 8 10/100/1000BaseT(X) ports, 0 to 60°C
EDS-G308-2SFP Unmanaged full Gigabit Ethernet switch with 6 10/100/1000BaseT(X) ports and 2 10/100/1000BaseT(X) or 1000BaseSFP slot combo ports, 0 to 60°C
EDS-G308-T Unmanaged full Gigabit Ethernet switch with 8 10/100/1000BaseT(X) ports, -40 to 75°C
EDS-G308-2SFP-TUnmanaged full Gigabit Ethernet switch with 6 10/100/1000BaseT(X) ports and 2 10/100/1000BaseT(X) or 1000BaseSFP slot combo ports, -40 to 75°C
NOTE: See the SFP-1G series ordering information for available SFP Gigabit Ethernet modules.
EDS-P308 Series
EDS-P308 Unmanaged Ethernet switch with 4 10/100BaseT(X) ports, and 4 PoE ports, 0 to 60°C
EDS-P308-M-SC Unmanaged Ethernet switch with 3 10/100BaseT(X) ports, 4 PoE ports, and 1 100BaseFX multi-mode port with SC connector, 0 to 60°C
EDS-P308-S-SC Unmanaged Ethernet switch with 3 10/100BaseT(X) ports, 4 PoE ports, and 1 100BaseFX single-mode port with SC connector, 0 to 60°C
EDS-P308-MM-SC Unmanaged Ethernet switch with 2 10/100BaseT(X) ports, 4 PoE ports, and 2 100BaseFX multi-mode ports with SC connectors, 0 to 60°C
EDS-P308-SS-SC Unmanaged Ethernet switch with 2 10/100BaseT(X) ports, 4 PoE ports, and 2 100BaseFX single-mode ports with SC connectors, 0 to 60°C
EDS-P308-T Unmanaged Ethernet switch with 4 10/100BaseT(X) ports, and 4 PoE ports, -40 to 75°C
EDS-P308-M-SC-T Unmanaged Ethernet switch with 3 10/100BaseT(X) ports, 4 PoE ports, and 1 100BaseFX multi-mode port with SC connector, -40 to 75°C
EDS-P308-S-SC-T Unmanaged Ethernet switch with 3 10/100BaseT(X) ports, 4 PoE ports, and 1 100BaseFX single-mode port with SC connector, -40 to 75°C
EDS-P308-MM-SC-T Unmanaged Ethernet switch with 2 10/100BaseT(X) ports, 4 PoE ports, and 2 100BaseFX multi-mode ports with SC connectors, -40 to 75°C
EDS-P308-SS-SC-T Unmanaged Ethernet switch with 2 10/100BaseT(X) ports, 4 PoE ports, and 2 100BaseFX single-mode ports with SC connectors, -40 to 75°C
SPL-24 Series
SPL-24 PoE splitter with maximum output of 12.95W at 24 VDC, 0 to 60°C
SPL-24-T PoE splitter with maximum output of 12.95W at 24 VDC, -40 to 75°C
Unmanaged Ethernet Switches
PX-1510 Series
PX-1510 Managed Gigabit Ethernet switch with 3 10/100BaseT(X) ports, 4 PoE 10/100BaseT(X) ports, and 3 10/100/1000BaseT(X) or 100/1000BaseSFP slots combo ports, 0 to 60°C
PX-1510-T Managed Gigabit Ethernet switch with 3 10/100BaseT(X) ports, 4 PoE 10/100BaseT(X) ports, and 3 10/100/1000BaseT(X) or 100/1000BaseSFP slots combo ports, -40 to 75°C
NOTE: See the SFP-1G series ordering information for available SFP Gigabit Ethernet modules.
EDS-SNMP OPC Server Pro
EDS-SNMP OPC Server Pro OPC server for integrating SNMP devices into HMI/SCADA systems
SFP-1G Series
SFP-1GSXLC SFP module with 1 1000BaseSX port with LC connector for 0.5 km transmission, 0 to 60°C
SFP-1GLXLC SFP module with 1 1000BaseLX port with LC connector for 10 km transmission, 0 to 60°C
SFP-1GLHXLC SFP module with 1 1000BaseLHX port with LC connector for 40 km transmission, 0 to 60°C
SFP-1GZXLC SFP module with 1 1000BaseZX port with LC connector for 80 km transmission, 0 to 60°C
SFP-1G10ALC WDM-type (BiDi) SFP module with 1 1000BaseSFP port with LC connector for 10 km transmission, TX 1310 nm, RX 1550 nm, 0 to 60°C
SFP-1G10BLC WDM-type (BiDi) SFP module with 1 1000BaseSFP port with LC connector for 10 km transmission, TX 1550 nm, RX 1310 nm, 0 to 60°C
SFP-1G20ALC WDM-type (BiDi) SFP module with 1 1000BaseSFP port with LC connector for 20 km transmission, TX 1310 nm, RX 1550 nm, 0 to 60°C
SFP-1G20BLC WDM-type (BiDi) SFP module with 1 1000BaseSFP port with LC connector for 20 km transmission, TX 1550 nm, RX 1310 nm, 0 to 60°C
SFP-1G40ALC WDM-type (BiDi) SFP module with 1 1000BaseSFP port with LC connector for 40 km transmission, TX 1310 nm, RX 1550 nm, 0 to 60°C
SFP-1G40BLC WDM-type (BiDi) SFP module with 1 1000BaseSFP port with LC connector for 40 km transmission, TX 1550 nm, RX 1310 nm, 0 to 60°C
SFP-1GSXLC-T SFP module with 1 1000BaseSX port with LC connector for 0.5 km transmission, -20 to 75°C
SFP-1GLXLC-T SFP module with 1 1000BaseLX port with LC connector for 10 km transmission, -40 to 85°C
SFP-1GLHXLC-T SFP module with 1 1000BaseLHX port with LC connector for 40 km transmission, -40 to 85°C
SFP-1GZXLC-T SFP module with 1 1000BaseZX port with LC connector for 80 km transmission, -40 to 85°C
SFP-1G10ALC-T WDM-type (BiDi) SFP module with 1 1000BaseSFP port with LC connector for 10 km transmission, TX 1310 nm, RX 1550 nm, -40 to 85°C
SFP-1G10BLC-T WDM-type (BiDi) SFP module with 1 1000BaseSFP port with LC connector for 10 km transmission, TX 1550 nm, RX 1310 nm, -40 to 85°C
SFP-1G20ALC-T WDM-type (BiDi) SFP module with 1 1000BaseSFP port with LC connector for 20 km transmission, TX 1310 nm, RX 1550 nm, -40 to 85°C
SFP-1G20BLC-T WDM-type (BiDi) SFP module with 1 1000BaseSFP port with LC connector for 20 km transmission, TX 1550 nm, RX 1310 nm, -40 to 85°C
SFP-1G40ALC-T WDM-type (BiDi) SFP module with 1 1000BaseSFP port with LC connector for 40 km transmission, TX 1310 nm, RX 1550 nm, -40 to 85°C
SFP-1G40BLC-T WDM-type (BiDi) SFP module with 1 1000BaseSFP port with LC connector for 40 km transmission, TX 1550 nm, RX 1310 nm, -40 to 85°C
www.moxa.com emai l : [email protected] 12-3
Industrial Ethernet Solutions for Control and Automation
12
AppendixProduct O
rdering Information
EDS-305-M12 Series
EDS-305-M12 Unmanaged IP67-rated Ethernet switch with 5 10/100BaseT(X) ports with M12 connectors, 0 to 60°C
EDS-305-M12-T Unmanaged IP67-rated Ethernet switch with 5 10/100BaseT(X) ports with M12 connectors, -40 to 75°C
Accessories for EDS-305-M12 Series
CBL-M12D(MM4P)/RJ45-100 IP67
1-meter M12-to-RJ45 Cat-5E UTP Ethernet cable with waterproof 4-pin D-coded M12 connector
BL-M12(FF5P)/OPEN-100 IP67
1-meter M12-to-5-pin power cable with waterproof 5-pin A-coded M12 connector
M12D-4P-IP68 Field-installable D-coded screw-in sensor connector, male
M12A-5P-IP68 Field-installable A-coded screw-in sensor connector, female
EDS-316 Series
EDS-316 Unmanaged Ethernet switch with 16 10/100BaseT(X) ports, 0 to 60°C
EDS-316-M-SC Unmanaged Ethernet switch with 15 10/100BaseT(X) ports, and 1 100BaseFX multi-mode port with SC connector, 0 to 60°C
EDS-316-M-ST Unmanaged Ethernet switch with 15 10/100BaseT(X) ports, and 1 100BaseFX multi-mode port with ST connector, 0 to 60°C
EDS-316-MM-SC Unmanaged Ethernet switch with 14 10/100BaseT(X) ports, and 2 100BaseFX multi-mode ports with SC connectors, 0 to 60°C
EDS-316-MM-ST Unmanaged Ethernet switch with 14 10/100BaseT(X) ports, and 2 100BaseFX multi-mode ports with ST connectors, 0 to 60°C
EDS-316-MS-SCUnmanaged Ethernet switch with 14 10/100BaseT(X) ports, 1 100BaseFX multi-mode port with SC connector, and 1 100BaseFX single-mode port with SC connector, 0 to 60°C
EDS-316-S-SC Unmanaged Ethernet switch with 15 10/100BaseT(X) ports, and 1 100BaseFX single-mode port with SC connector, 0 to 60°C
EDS-316-SS-SC Unmanaged Ethernet switch with 14 10/100BaseT(X) ports, and 2 100BaseFX single-mode ports with SC connectors, 0 to 60°C
EDS-316-MS-SC-80Unmanaged Ethernet switch with 14 10/100BaseT(X) ports, 1 100BaseFX multi-mode port with SC connector, and 1 100BaseFX single-mode port with SC connector for 80 km transmission, 0 to 60°C
EDS-316-S-SC-80 Unmanaged Ethernet switch with 15 10/100BaseT(X) ports, and 1 100BaseFX single-mode port with SC connector for 80 km transmission, 0 to 60°C
EDS-316-SS-SC-80Unmanaged Ethernet switch with 14 10/100BaseT(X) ports, and 2 100BaseFX single-mode ports with SC connectors for 80 km transmission, 0 to 60°C
EDS-316-SS-SC-40/80Unmanaged Ethernet switch with 14 10/100BaseT(X) ports, 1 100BaseFX single-mode port with SC connector for 40 km transmission, and 1 100BaseFX single-mode port with SC connector for 80 km transmission, 0 to 60°C
EDS-316-T Unmanaged Ethernet switch with 16 10/100BaseT(X) ports, -40 to 75°C
EDS-316-M-SC-T Unmanaged Ethernet switch with 15 10/100BaseT(X) ports, and 1 100BaseFX multi-mode port with SC connector, -40 to 75°C
EDS-316-M-ST-T Unmanaged Ethernet switch with 15 10/100BaseT(X) ports, and 1 100BaseFX multi-mode port with ST connector, -40 to 75°C
EDS-316-MM-SC-T Unmanaged Ethernet switch with 14 10/100BaseT(X) ports, and 2 100BaseFX multi-mode ports with SC connectors, -40 to 75°C
EDS-316-MM-ST-T Unmanaged Ethernet switch with 14 10/100BaseT(X) ports, and 2 100BaseFX multi-mode ports with ST connectors, -40 to 75°C
EDS-316-MS-SC-TUnmanaged Ethernet switch with 14 10/100BaseT(X) ports, 1 100BaseFX multi-mode port with SC connector, and 1 100BaseFX single-mode port with SC connector, -40 to 75°C
EDS-316-S-SC-T Unmanaged Ethernet switch with 15 10/100BaseT(X) ports, and 1 100BaseFX single-mode port with SC connector, -40 to 75°C
EDS-316-SS-SC-T Unmanaged Ethernet switch with 14 10/100BaseT(X) ports, and 2 100BaseFX single-mode ports with SC connectors, -40 to 75°C
EDS-309 Series
EDS-309-3M-SC Unmanaged Ethernet switch with 6 10/100BaseT(X) ports, and 3 100BaseFX multi-mode ports with SC connectors, 0 to 60°C
EDS-309-3M-ST UUnmanaged Ethernet switch with 6 10/100BaseT(X) ports, and 3 100BaseFX multi-mode ports with ST connectors, 0 to 60°C
EDS-309-3M-SC-T Unmanaged Ethernet switch with 6 10/100BaseT(X) ports, and 3 100BaseFX multi-mode ports with SC connectors, -40 to 75°C
EDS-309-3M-ST-T Unmanaged Ethernet switch with 6 10/100BaseT(X) ports, and 3 100BaseFX multi-mode ports with ST connectors, -40 to 75°C
EDS-308 Series
EDS-308 Unmanaged Ethernet switch with 8 10/100BaseT(X) ports, 0 to 60°C
EDS-308-M-SC Unmanaged Ethernet switch with 7 10/100BaseT(X) ports, and 1 100BaseFX multi-mode port with SC connector, 0 to 60°C
EDS-308-MM-SC Unmanaged Ethernet switch with 6 10/100BaseT(X) ports, and 2 100BaseFX multi-mode ports with SC connectors, 0 to 60°C
EDS-308-MM-ST Unmanaged Ethernet switch with 6 10/100BaseT(X) ports, and 2 100BaseFX multi-mode ports with ST connector, 0 to 60°C
EDS-308-S-SC Unmanaged Ethernet switch with 7 10/100BaseT(X) ports, and 1 100BaseFX single-mode port with SC connector, 0 to 60°C
EDS-308-SS-SC Unmanaged Ethernet switch with 6 10/100BaseT(X) ports, and 2 100BaseFX single-mode ports with SC connectors, 0 to 60°C
EDS-308-S-SC-80 Unmanaged Ethernet switch with 7 10/100BaseT(X) ports, and 1 100BaseFX single-mode port with SC connector for 80 km transmission, 0 to 60°C
EDS-308-SS-SC-80 Unmanaged Ethernet switch with 6 10/100BaseT(X) ports, and 2 100BaseFX single-mode ports with SC connectors for 80 km transmission, 0 to 60°C
EDS-308-T Unmanaged Ethernet switch with 8 10/100BaseT(X) ports, -40 to 75°C
EDS-308-M-SC-T Unmanaged Ethernet switch with 7 10/100BaseT(X) ports, and 1 100BaseFX multi-mode port with SC connector, -40 to 75°C
emai l : [email protected] www.moxa.com 12-4
0
12
10
OverviewOrdering Inform
ation M
edia Converters
9
8
Modular
Remote I/O
7
Peer-to-PeerI/O
6
Active Ethernet I/O
5
Wireless
Ethernet
4
3
2
1
VideoNetworkingProducts
Modular
EthernetSwitches
Unmanaged
EthernetSwitches
Rackmount
EthernetSwitches
Managed
EthernetSwitches
11
AccessoriesAppendix Product Ordering Information
PT-7828 Series
PT-7828-F-24 IEC 61850-3 Layer 3 modular managed Ethernet switch system with 3 slots for fast Ethernet modules, and 1 slot for Gigabit Ethernet modules, up to 24+4G ports, front cabling, 1 isolated power supply (24 VDC), -40 to 85°C
PT-7828-R-24 IEC 61850-3 Layer 3 modular managed Ethernet switch system with 3 slots for fast Ethernet modules, and 1 slot for Gigabit Ethernet modules, up to 24+4G ports, rear cabling, 1 isolated power supply (24 VDC), -40 to 85°C
PT-7828-F-24-24 IEC 61850-3 Layer 3 modular managed Ethernet switch system with 3 slots for fast Ethernet modules, and 1 slot for Gigabit Ethernet modules, up to 24+4G ports, front cabling, 2 isolated power supplies (24 VDC), -40 to 85°C
PT-7828-R-24-24 IEC 61850-3 Layer 3 modular managed Ethernet switch system with 3 slots for fast Ethernet modules, and 1 slot for Gigabit Ethernet modules, up to 24+4G ports, rear cabling, 2 isolated power supplies (24 VDC), -40 to 85°C
PT-7828-F-24-48 IEC 61850-3 Layer 3 modular managed Ethernet switch system with 3 slots for fast Ethernet modules, and 1 slot for Gigabit Ethernet modules, up to 24+4G ports, front cabling, 2 isolated power supplies (24 and 48 VDC), -40 to 85°C
PT-7828-R-24-48 IEC 61850-3 Layer 3 modular managed Ethernet switch system with 3 slots for fast Ethernet modules, and 1 slot for Gigabit Ethernet modules, up to 24+4G ports, rear cabling, 2 isolated power supplies (24 and 48 VDC), -40 to 85°C
PT-7828-F-24-HV IEC 61850-3 Layer 3 modular managed Ethernet switch system with 3 slots for fast Ethernet modules, and 1 slot for Gigabit Ethernet modules, up to 24+4G ports, front cabling, 2 isolated power supplies (24 VDC and 88-300 VDC or 85-264 VAC), -40 to 85°C
PT-7828-R-24-HV IEC 61850-3 Layer 3 modular managed Ethernet switch system with 3 slots for fast Ethernet modules, and 1 slot for Gigabit Ethernet modules, up to 24+4G ports, rear cabling, 2 isolated power supplies (24 VDC and 88-300 VDC or 85-264 VAC), -40 to 85°C
PT-7828-F-48 IEC 61850-3 Layer 3 modular managed Ethernet switch system with 3 slots for fast Ethernet modules, and 1 slot for Gigabit Ethernet modules, up to 24+4G ports, front cabling, 1 isolated power supply (48 VDC), -40 to 85°C
PT-7828-R-48 IEC 61850-3 Layer 3 modular managed Ethernet switch system with 3 slots for fast Ethernet modules, and 1 slot for Gigabit Ethernet modules, up to 24+4G ports, rear cabling, 1 isolated power supply (48 VDC), -40 to 85°C
PT-7828-F-48-48 IEC 61850-3 Layer 3 modular managed Ethernet switch system with 3 slots for fast Ethernet modules, and 1 slot for Gigabit Ethernet modules, up to 24+4G ports, front cabling, 2 isolated power supplies (48 VDC), -40 to 85°C
Rackmount Ethernet Switches
EDS-308-MM-SC-T Unmanaged Ethernet switch with 6 10/100BaseT(X) ports, and 2 100BaseFX multi-mode ports with SC connectors, -40 to 75°C
EDS-308-MM-ST-T Unmanaged Ethernet switch with 6 10/100BaseT(X) ports, and 2 100BaseFX multi-mode ports with ST connector, -40 to 75°C
EDS-308-S-SC-T Unmanaged Ethernet switch with 7 10/100BaseT(X) ports, and 1 100BaseFX single-mode port with SC connector, -40 to 75°C
EDS-308-SS-SC-T Unmanaged Ethernet switch with 6 10/100BaseT(X) ports, and 2 100BaseFX single-mode ports with SC connectors, -40 to 75°C
EDS-308-S-SC-80-T Unmanaged Ethernet switch with 7 10/100BaseT(X) ports, and 1 100BaseFX single-mode port with SC connector for 80 km transmission, -40 to 75°C
EDS-308-SS-SC-80-TUnmanaged Ethernet switch with 6 10/100BaseT(X) ports, and 2 100BaseFX single-mode ports with SC connectors for 80 km transmission, -40 to 75°C
EDS-305 Series
EDS-305 Unmanaged Ethernet switch with 5 10/100BaseT(X) ports, 0 to 60°C
EDS-305-M-SC Unmanaged Ethernet switch with 4 10/100BaseT(X) ports, and 1 100BaseFX multi-mode port with SC connector, 0 to 60°C
EDS-305-M-ST Unmanaged Ethernet switch with 4 10/100BaseT(X) ports, and 1 100BaseFX multi-mode port with ST connector, 0 to 60°C
EDS-305-S-SC Unmanaged Ethernet switch with 4 10/100BaseT(X) ports, and 1 100BaseFX single-mode port with SC connector, 0 to 60°C
EDS-305-S-SC-80 Unmanaged Ethernet switch with 4 10/100BaseT(X) ports, and 1 100BaseFX single-mode port with SC connector for 80 km transmission, 0 to 60°C
EDS-305-T Unmanaged Ethernet switch with 5 10/100BaseT(X) ports, -40 to 75°C
EDS-305-M-SC-T Unmanaged Ethernet switch with 4 10/100BaseT(X) ports, and 1 100BaseFX multi-mode port with SC connector, -40 to 75°C
EDS-305-M-ST-T Unmanaged Ethernet switch with 4 10/100BaseT(X) ports, and 1 100BaseFX multi-mode port with ST connector, -40 to 75°C
EDS-305-S-SC-T Unmanaged Ethernet switch with 4 10/100BaseT(X) ports, and 1 100BaseFX single-mode port with SC connector, -40 to 75°C
EDS-208A/208 Series
EDS-208A Unmanaged Ethernet switch with 8 10/100BaseT(X) ports; metal casing, -10 to 60°C
EDS-208A-M-SC Unmanaged Ethernet switch with 7 10/100BaseT(X) ports, and 1 100BaseFX multi-mode port with SC connector; metal casing, -10 to 60°C
EDS-208A-M-ST Unmanaged Ethernet switch with 7 10/100BaseT(X) ports, and 1 100BaseFX multi-mode port with ST connector; metal casing, -10 to 60°C
EDS-208 Entry-level unmanaged Ethernet switch with 8 10/100BaseT(X) ports; plastic casing, -10 to 60°C
EDS-208-M-SC Entry-level unmanaged Ethernet switch with 7 10/100BaseT(X) ports, and 1 100BaseFX multi-mode port with SC connector; plastic casing, -10 to 60°C
EDS-208-M-ST Entry-level unmanaged Ethernet switch with 7 10/100BaseT(X) ports, and 1 100BaseFX multi-mode port with ST connector; plastic casing, -10 to 60°C
EDS-205A/205 Series
EDS-205A Unmanaged Ethernet switch with 5 10/100BaseT(X) ports; metal casing, -10 to 60°C
EDS-205 Entry-level unmanaged Ethernet switch with 5 10/100BaseT(X) ports; plastic casing, -10 to 60°C
www.moxa.com emai l : [email protected] 12-5
Industrial Ethernet Solutions for Control and Automation
12
AppendixProduct O
rdering Information
PT-7828-R-48-48 IEC 61850-3 Layer 3 modular managed Ethernet switch system with 3 slots for fast Ethernet modules, and 1 slot for Gigabit Ethernet modules, up to 24+4G ports, rear cabling, 2 isolated power supplies (48 VDC), -40 to 85°C
PT-7828-F-48-HV IEC 61850-3 Layer 3 modular managed Ethernet switch system with 3 slots for fast Ethernet modules, and 1 slot for Gigabit Ethernet modules, up to 24+4G ports, front cabling, 2 isolated power supplies (48 VDC and 88-300 VDC or 85-264 VAC), -40 to 85°C
PT-7828-R-48-HV IEC 61850-3 Layer 3 modular managed Ethernet switch system with 3 slots for fast Ethernet modules, and 1 slot for Gigabit Ethernet modules, up to 24+4G ports, rear cabling, 2 isolated power supplies (48 VDC and 88-300 VDC or 85-264 VAC), -40 to 85°C
PT-7828-F-HV IEC 61850-3 Layer 3 modular managed Ethernet switch system with 3 slots for fast Ethernet modules, and 1 slot for Gigabit Ethernet modules, up to 24+4G ports, front cabling, 1 isolated power supply (88-300 VDC or 85-264 VAC), -40 to 85°C
PT-7828-R-HV IEC 61850-3 Layer 3 modular managed Ethernet switch system with 3 slots for fast Ethernet modules, and 1 slot for Gigabit Ethernet modules, up to 24+4G ports, rear cabling, 1 isolated power supply (88-300 VDC or 85-264 VAC), -40 to 85°C
PT-7828-F-HV-HV IEC 61850-3 Layer 3 modular managed Ethernet switch system with 3 slots for fast Ethernet modules, and 1 slot for Gigabit Ethernet modules, up to 24+4G ports, front cabling, 2 isolated power supplies (88-300 VDC or 85-264 VAC), -40 to 85°C
PT-7828-R-HV-HV IEC 61850-3 Layer 3 modular managed Ethernet switch system with 3 slots for fast Ethernet modules, and 1 slot for Gigabit Ethernet modules, up to 24+4G ports, rear cabling, 2 isolated power supplies (88-300 VDC or 85-264 VAC), -40 to 85°C
NOTE: See the PM-7200 ordering information for available Gigabit and fast Ethernet modules.
PT-7728 Series
PT-7728-F-24 IEC 61850-3 modular managed Ethernet switch system with 3 slots for fast Ethernet modules, and 1 slot for Gigabit Ethernet modules, up to 24+4G ports, front cabling, 1 isolated power supply (24 VDC), -40 to 85°C
PT-7728-R-24 IEC 61850-3 modular managed Ethernet switch system with 3 slots for fast Ethernet modules, and 1 slot for Gigabit Ethernet modules, up to 24+4G ports, rear cabling, 1 isolated power supply (24 VDC), -40 to 85°C
PT-7728-F-24-24 IEC 61850-3 modular managed Ethernet switch system with 3 slots for fast Ethernet modules, and 1 slot for Gigabit Ethernet modules, up to 24+4G ports, front cabling, 2 isolated power supplies (24 VDC), -40 to 85°C
PT-7728-R-24-24 IEC 61850-3 modular managed Ethernet switch system with 3 slots for fast Ethernet modules, and 1 slot for Gigabit Ethernet modules, up to 24+4G ports, rear cabling, 2 isolated power supplies (24 VDC), -40 to 85°C
PT-7728-F-24-48 IEC 61850-3 modular managed Ethernet switch system with 3 slots for fast Ethernet modules, and 1 slot for Gigabit Ethernet modules, up to 24+4G ports, front cabling, 2 isolated power supplies (24 and 48 VDC), -40 to 85°C
PT-7728-R-24-48 IEC 61850-3 modular managed Ethernet switch system with 3 slots for fast Ethernet modules, and 1 slot for Gigabit Ethernet modules, up to 24+4G ports, rear cabling, 2 isolated power supplies (24 and 48 VDC), -40 to 85°C
PT-7728-F-24-HV IEC 61850-3 modular managed Ethernet switch system with 3 slots for fast Ethernet modules, and 1 slot for Gigabit Ethernet modules, up to 24+4G ports, front cabling, 2 isolated power supplies (24 VDC and 88-300 VDC or 85-264 VAC), -40 to 85°C
PT-7728-R-24-HV IEC 61850-3 modular managed Ethernet switch system with 3 slots for fast Ethernet modules, and 1 slot for Gigabit Ethernet modules, up to 24+4G ports, rear cabling, 2 isolated power supplies (24 VDC and 88-300 VDC or 85-264 VAC), -40 to 85°C
PT-7728-F-48 IEC 61850-3 modular managed Ethernet switch system with 3 slots for fast Ethernet modules, and 1 slot for Gigabit Ethernet modules, up to 24+4G ports, front cabling, 1 isolated power supply (48 VDC), -40 to 85°C
PT-7728-R-48 IEC 61850-3 modular managed Ethernet switch system with 3 slots for fast Ethernet modules, and 1 slot for Gigabit Ethernet modules, up to 24+4G ports, rear cabling, 1 isolated power supply (48 VDC), -40 to 85°C
PT-7728-F-48-48 IEC 61850-3 modular managed Ethernet switch system with 3 slots for fast Ethernet modules, and 1 slot for Gigabit Ethernet modules, up to 24+4G ports, front cabling, 2 isolated power supplies (48 VDC), -40 to 85°C
PT-7728-R-48-48 IEC 61850-3 modular managed Ethernet switch system with 3 slots for fast Ethernet modules, and 1 slot for Gigabit Ethernet modules, up to 24+4G ports, rear cabling, 2 isolated power supplies (48 VDC), -40 to 85°C
PT-7728-F-48-HV IEC 61850-3 modular managed Ethernet switch system with 3 slots for fast Ethernet modules, and 1 slot for Gigabit Ethernet modules, up to 24+4G ports, front cabling, 2 isolated power supplies (48 VDC and 88-300 VDC or 85-264 VAC), -40 to 85°C
PT-7728-R-48-HV IEC 61850-3 modular managed Ethernet switch system with 3 slots for fast Ethernet modules, and 1 slot for Gigabit Ethernet modules, up to 24+4G ports, rear cabling, 2 isolated power supplies (48 VDC and 88-300 VDC or 85-264 VAC), -40 to 85°C
PT-7728-F-HV IEC 61850-3 modular managed Ethernet switch system with 3 slots for fast Ethernet modules, and 1 slot for Gigabit Ethernet modules, up to 24+4G ports, front cabling, 1 isolated power supply (88-300 VDC or 85-264 VAC), -40 to 85°C
PT-7728-R-HV IEC 61850-3 modular managed Ethernet switch system with 3 slots for fast Ethernet modules, and 1 slot for Gigabit Ethernet modules, up to 24+4G ports, rear cabling, 1 isolated power supply (88-300 VDC or 85-264 VAC), -40 to 85°C
PT-7728-F-HV-HV IEC 61850-3 modular managed Ethernet switch system with 3 slots for fast Ethernet modules, and 1 slot for Gigabit Ethernet modules, up to 24+4G ports, front cabling, 2 isolated power supplies (88-300 VDC or 85-264 VAC), -40 to 85°C
PT-7728-R-HV-HV IEC 61850-3 modular managed Ethernet switch system with 3 slots for fast Ethernet modules, and 1 slot for Gigabit Ethernet modules, up to 24+4G ports, rear cabling, 2 isolated power supplies (88-300 VDC or 85-264 VAC), -40 to 85°C
NOTE: See the PM-7200 ordering information for available Gigabit and fast Ethernet modules.
PT-7710 Series
PT-7710-F-LV IEC 61850-3 modular managed Ethernet switch system with 1 slot for fast Ethernet modules, and 1 slot for fast Ethernet or Gigabit Ethernet modules, up to 10 or 8+2G ports, front cabling, 1 power supply (24/48 VDC), -40 to 85°C
PT-7710-D-LV IEC 61850-3 modular managed Ethernet switch system with 1 slot for fast Ethernet modules, and 1 slot for fast Ethernet or Gigabit Ethernet modules, up to 10 or 8+2G ports, down cabling, 1 power supply (24/48 VDC), -40 to 85°C
emai l : [email protected] www.moxa.com 12-6
0
12
10
OverviewOrdering Inform
ation M
edia Converters
9
8
Modular
Remote I/O
7
Peer-to-PeerI/O
6
Active Ethernet I/O
5
Wireless
Ethernet
4
3
2
1
VideoNetworkingProducts
Modular
EthernetSwitches
Unmanaged
EthernetSwitches
Rackmount
EthernetSwitches
Managed
EthernetSwitches
11
AccessoriesAppendix Product Ordering Information
PT-7710-F-HV IEC 61850-3 modular managed Ethernet switch system with 1 slot for fast Ethernet modules, and 1 slot for fast Ethernet or Gigabit Ethernet modules, up to 10 or 8+2G ports, front cabling, 1 isolated power supply (88-300 VDC or 85-264 VAC), -40 to 85°C
PT-7710-D-HV IEC 61850-3 modular managed Ethernet switch system with 1 slot for fast Ethernet modules, and 1 slot for fast Ethernet or Gigabit Ethernet modules, up to 10 or 8+2G ports, down cabling, 1 isolated power supply (88-300 VDC or 85-264 VAC), -40 to 85°C
NOTE: See the PM-7200 ordering information for available Gigabit and fast Ethernet modules.
PT-7324 Series
PT-7324-F-LV IEC 61850-3 smart Ethernet switch system with 22 10/100BaseT(X) ports, and 1 slot for fast Ethernet or Gigabit Ethernet modules, up to 24 or 22+2G ports, front cabling, 1 power supply (24/48 VDC), -40 to 85°C
PT-7324-R-LV IEC 61850-3 smart Ethernet switch system with 22 10/100BaseT(X) ports, and 1 slot for fast Ethernet or Gigabit Ethernet modules, up to 24 or 22+2G ports, rear cabling, 1 power supply (24/48 VDC), -40 to 85°C
PT-7324-F-HV IEC 61850-3 smart Ethernet switch system with 22 10/100BaseT(X) ports, and 1 slot for fast Ethernet or Gigabit Ethernet modules, up to 24 or 22+2G ports, front cabling, 1 power supply (88-300 VDC or 85-264 VAC), -40 to 85°C
PT-7324-R-HV IEC 61850-3 smart Ethernet switch system with 22 10/100BaseT(X) ports, and 1 slot for fast Ethernet or Gigabit Ethernet modules, up to 24 or 22+2G ports, rear cabling, 1 power supply (88-300 VDC or 85-264 VAC), -40 to 85°C
NOTE: See the PM-7200 ordering information for available Gigabit and fast Ethernet modules.
IKS-6726 Series
IKS-6726-F-24 Modular managed Ethernet switch system with 8 10/100BaseT(X) ports, 2 slots for fast Ethernet modules, and 1 slot for Gigabit Ethernet modules, up to 24+2G ports, front cabling, 1 isolated power supply (24 VDC), -40 to 75°C
IKS-6726-F-24-24 Modular managed Ethernet switch system with 8 10/100BaseT(X) ports, 2 slots for fast Ethernet modules, and 1 slot for Gigabit Ethernet modules, up to 24+2G ports, front cabling, 2 isolated power supplies (24 VDC), -40 to 75°C
IKS-6726-F-24-48 Modular managed Ethernet switch system with 8 10/100BaseT(X) ports, 2 slots for fast Ethernet modules, and 1 slot for Gigabit Ethernet modules, up to 24+2G ports, front cabling, 2 isolated power supplies (24 and 48 VDC), -40 to 75°C
IKS-6726-F-24-HV Modular managed Ethernet switch system with 8 10/100BaseT(X) ports, 2 slots for fast Ethernet modules, and 1 slot for Gigabit Ethernet modules, up to 24+2G ports, front cabling, 2 isolated power supplies (24 VDC and 88-300 VDC or 85-264 VAC), -40 to 75°C
IKS-6726-F-48 Modular managed Ethernet switch system with 8 10/100BaseT(X) ports, 2 slots for fast Ethernet modules, and 1 slot for Gigabit Ethernet modules, up to 24+2G ports, front cabling, 1 isolated power supply (48 VDC), -40 to 75°C
IKS-6726-F-48-48 Modular managed Ethernet switch system with 8 10/100BaseT(X) ports, 2 slots for fast Ethernet modules, and 1 slot for Gigabit Ethernet modules, up to 24+2G ports, front cabling, 2 isolated power supplies (48 VDC), -40 to 75°C
IKS-6726-F-48-HV Modular managed Ethernet switch system with 8 10/100BaseT(X) ports, 2 slots for fast Ethernet modules, and 1 slot for Gigabit Ethernet modules, up to 24+2G ports, front cabling, 2 isolated power supplies (48 VDC and 88-300 VDC or 85-264 VAC), -40 to 75°C
IKS-6726-F-HV Modular managed Ethernet switch system with 8 10/100BaseT(X) ports, 2 slots for fast Ethernet modules, and 1 slot for Gigabit Ethernet modules, up to 24+2G ports, front cabling, 1 isolated power supply (88-300 VDC or 85-264 VAC), -40 to 75°C
IKS-6726-F-HV-HV Modular managed Ethernet switch system with 8 10/100BaseT(X) ports, 2 slots for fast Ethernet modules, and 1 slot for Gigabit Ethernet modules, up to 24+2G ports, front cabling, 2 isolated power supplies (88-300 VDC or 85-264 VAC), -40 to 75°C
NOTE: See the PM-7200 ordering information for available Gigabit and fast Ethernet modules.
IKS-6324 Series
IKS-6324-F-LV Unmanaged Ethernet switch system with 22 10/100BaseT(X) ports, and 1 slot for fast Ethernet or Gigabit Ethernet modules, up to 24 or 22+2G ports, front cabling, 1 power supply (24/48 VDC), -40 to 75°C
IKS-6324-F-HV Unmanaged Ethernet switch system with 22 10/100BaseT(X) ports, and 1 slot for fast Ethernet or Gigabit Ethernet modules, up to 24 or 22+2G ports, front cabling, 1 power supply (88-300 VDC or 85-264 VAC), -40 to 75°C
NOTE: See the PM-7200 ordering information for available Gigabit and fast Ethernet modules.
PM-7200 Series Interface Modules
PM-7200-4GTXSFP Gigabit Ethernet module with 4 10/100/1000BaseT(X) or 1000BaseSFP slot combo ports (see the SFP-1G series ordering information for available SFP Gigabit Ethernet modules)
PM-7200-2GTXSFP Gigabit Ethernet module with 2 10/100/1000BaseT(X) or 1000BaseSFP slot combo ports (see the SFP-1G series ordering information for available SFP Gigabit Ethernet modules)
PM-7200-8TX Fast Ethernet module with 8 10/100BaseT(X) ports
PM-7200-6MSC Fast Ethernet module with 6 100BaseFX multi-mode ports with SC connectors
PM-7200-6MST Fast Ethernet module with 6 100BaseFX multi-mode ports with ST connectors
PM-7200-6SSC Fast Ethernet module with 6 100BaseFX single-mode ports with SC connectors
PM-7200-4MSC2TX Fast Ethernet module with 4 100BaseFX multi-mode ports with SC connectors and 2 10/100BaseT(X) ports
PM-7200-4MST2TX Fast Ethernet module with 4 100BaseFX multi-mode ports with ST connectors and 2 10/100BaseT(X) ports
PM-7200-4SSC2TX Fast Ethernet module with 4 100BaseFX single-mode ports with SC connectors and 2 10/100BaseT(X) ports
PM-7200-2MSC4TX Fast Ethernet module with 2 100BaseFX multi-mode ports with SC connectors and 4 10/100BaseT(X) ports
PM-7200-2MST4TX Fast Ethernet module with 2 100BaseFX multi-mode ports with ST connectors and 4 10/100BaseT(X) ports
www.moxa.com emai l : [email protected] 12-7
Industrial Ethernet Solutions for Control and Automation
12
AppendixProduct O
rdering Information
PM-7200-2SSC4TX Fast Ethernet module with 2 100BaseFX single-mode ports with SC connectors and 4 10/100BaseT(X) ports
PM-7200-1LSC6TX Fast Ethernet module with 1 100BaseFX single-mode port with SC connector for 80 km transmission and 6 10/100BaseT(X) ports
PM-7200-2MSC Fast Ethernet module with 2 100BaseFX multi-mode ports with SC connectors
PM-7200-2MST Fast Ethernet module with 2 100BaseFX multi-mode ports with ST connectors
PM-7200-2SSC Fast Ethernet module with 2 100BaseFX single-mode ports with SC connectors
PM-7200-1MSC Fast Ethernet module with 1 100BaseFX multi-mode port with SC connector
PM-7200-1MST Fast Ethernet module with 1 100BaseFX multi-mode port with ST connector
PM-7200-1SSC Fast Ethernet module with 1 100BaseFX single-mode port with SC connector
AWK-3121 Series
AWK-3121-US IEEE 802.11a/b/g wireless AP/Bridge/Client, US band, 0 to 60°C
AWK-3121-EU IEEE 802.11a/b/g wireless AP/Bridge/Client, Euro band, 0 to 60°C
AWK-3121-JP IEEE 802.11a/b/g wireless AP/Bridge/Client, Japan band, 0 to 60°C
AWK-3121-US-T IEEE 802.11a/b/g wireless AP/Bridge/Client, US band, -40 to 75°C
AWK-3121-EU-T IEEE 802.11a/b/g wireless AP/Bridge/Client, Euro band, -40 to 75°C
AWK-3121-JP-T IEEE 802.11a/b/g wireless AP/Bridge/Client, Japan band, -40 to 75°C
AWK-1200 Series
AWK-1200-AP-US IEEE 802.11g/b IP68 wireless AP/Bridge, US band, -20 to 70°C
AWK-1200-AP-EU IEEE 802.11g/b IP68 wireless AP/Bridge, Euro band, -20 to 70°C
AWK-1200-AP-JP IEEE 802.11g/b IP68 wireless AP/Bridge, Japan band, -20 to 70°C
AWK-1200-AC-US IEEE 802.11g/b IP67 wireless AP Client, US band, -20 to 70°C
AWK-1200-AC-EU IEEE 802.11g/b IP67 wireless AP Client, Euro band, -20 to 70°C
AWK-1200-AC-JP IEEE 802.11g/b IP67 wireless AP Client, Japan band, -20 to 70°C
AWK-1100 Series
AWK-1100-US IEEE 802.11g/b wireless AP/Bridge/AP Client, US band, 0 to 60°C
AWK-1100-EU IEEE 802.11g/b wireless AP/Bridge/AP Client, Euro band, 0 to 60°C
AWK-1100-JP IEEE 802.11g/b wireless AP/Bridge/AP Client, Japan band, 0 to 60°C
Antennas and Accessories
ANT-WDB-O-2 IEEE 802.11a/b/g 2.4 & 5 GHz dual-band antenna, RP-SMA (female) connector
ANT-WSB-O-02 IEEE 802.11b/g 2.4 GHz, omni-directional antenna, RP-SMA (female) connector
ANT-WSB-O-5-150 IEEE 802.11b/g 2.4 GHz, omni-directional antenna, RP-SMA (female) connector, with 150mm cable
ANT-1-O-09 IEEE 802.11b/g 2.4 GHz, omni-directional, 9 dBi antenna, N-Female connector
ANT-1-D-12 IEEE 802.11b/g 2.4 GHz, directional, 12 dBi antenna, N-Female connector
CRF-N0117SA-3M CFD200 cable, N-Male to RP SMA Male connector, 3 meters (for AWK-3121 and AWK-1100 only)
CRF-N0429N-3M CFD400 cable, N-Male to N-Male connector, 3 meters (for AWK-1200-AP only)
HA-1002SU Swivel mounting kit, swivel angle 90° horizontal, 40° vertical
ioLogik E2000 Series
ioLogik E2210 Active Ethernet I/O with 12 digital inputs and 8 digital outputs
ioLogik E2212 Active Ethernet I/O with 8 digital inputs, 8 digital outputs, and 4 configurable DIOs
ioLogik E2214 Active Ethernet I/O with 6 digital inputs and 6 relay outputs
ioLogik E2240 Active Ethernet I/O with 8 analog inputs and 2 analog outputs
ioLogik E2242 Active Ethernet I/O with 4 analog inputs and 12 configurable DIOs
ioLogik E2260 Active Ethernet I/O with 6 RTD inputs and 4 digital outputs
ioLogik E2262 Active Ethernet I/O with 8 thermocouple inputs and 4 digital outputs
Industrial Wireless AP/Bridge/AP Client
Remote I/O
Active Ethernet I/O
emai l : [email protected] www.moxa.com 12-8
0
12
10
OverviewOrdering Inform
ation M
edia Converters
9
8
Modular
Remote I/O
7
Peer-to-PeerI/O
6
Active Ethernet I/O
5
Wireless
Ethernet
4
3
2
1
VideoNetworkingProducts
Modular
EthernetSwitches
Unmanaged
EthernetSwitches
Rackmount
EthernetSwitches
Managed
EthernetSwitches
11
AccessoriesAppendix Product Ordering Information
ioLogik R2000 Series
ioLogik R2110 RS-485 remote I/O with 12 digital inputs and 8 digital outputs
ioLogik R2140 RS-485 remote I/O with 8 analog inputs and 2 analog outputs
Ethernet Peer-to-Peer I/OioMirror E3210
ioMirror E3210 Ethernet peer-to-peer I/O with 8 digital inputs and 8 digital outputs
Accessories for Stand-alone I/OLDP1602 LCD Module
LDP1602 Snap-on LCD module with 16 x 2 text display and 5 buttons (can be used with any of the E2000, R2000, and E3000 products)
Modular Remote I/ONetwork Adaptor Modules
NA-4010 Ethernet Network Adaptor (Modbus/TCP)
NA-4020 RS-485 Network Adaptor (Modbus)
NA-4021 RS-232 Network Adaptor (Modbus)
Digital Input Modules
M-1400 4 digital inputs, sink, 24 VDC
M-1401 4 digital inputs, source, 24 VDC
M-1800 8 digital inputs, sink, 24 VDC
M-1801 8 digital inputs, source, 24 VDC
M-1600 16 digital inputs, sink, 24 VDC
M-1601 16 digital inputs, source, 24 VDC
M-1410 4 digital inputs, sink, 48 VDC
M-1411 4 digital inputs, source, 48 VDC
M-1450 4 digital inputs, 110 VAC
M-1451 4 digital inputs, 220 VAC
Digital Output Modules
M-2400 4 digital outputs, sink, 24 VDC, 0.5A
M-2401 4 digital outputs, source, 24 VDC, 0.5A
M-2800 8 digital outputs, sink, 24 VDC, 0.5A
M-2801 8 digital outputs, source, 24 VDC, 0.5A
M-2402 4 digital outputs, diagnostics, sink, 24 VDC, 0.5A
M-2403 4 digital outputs, diagnostics, source, 24 VDC, 0.5A
M-2404 4 digital outputs, diagnostics, sink, 24 VDC, 2A
M-2405 4 digital outputs, diagnostics, source, 24 VDC, 2A
M-2600 16 digital outputs, sink, 24 VDC, 0.3A
M-2601 16 digital outputs, source, 24 VDC, 0.3A
M-2250 2 digital outputs, relay, 24 VDC/230 VAC, 2A
M-2254 2 digital outputs, triac, 12 to 125 VAC, 0.5A
Analog Input Modules
M-3400 4 analog inputs, 0 to 20 mA, 12-bit
M-3402 4 analog inputs, 4 to 20 mA, 12-bit
M-3410 4 analog inputs, 0 to 10V, 12-bit
M-3412 4 analog inputs, -10 to 10V, 12-bit
M-3414 4 analog inputs, 0 to 5V, 12-bit
M-3401 4 analog inputs, 0 to 20 mA, 14-bit
M-3403 4 analog inputs, 4 to 20 mA, 14-bit
M-3411 4 analog inputs, 0 to 10V, 14-bit
M-3413 4 analog inputs, -10 to 10V, 14-bit
M-3415 4 analog inputs, 0 to 5V, 14-bit
Serial Remote I/O
www.moxa.com emai l : [email protected] 12-9
Industrial Ethernet Solutions for Control and Automation
12
AppendixProduct O
rdering Information
Temperature Input Modules
M-6200 2 analog inputs, RTD: PT100, JPT100
M-6201 2 analog inputs, thermocouple
Analog Output Modules
M-4201 2 analog outputs, 0 to 20 mA, 12-bit
M-4202 2 analog outputs, 4 to 20 mA, 12-bit
M-4210 2 analog outputs, 0 to 10V, 12-bit
M-4211 2 analog outputs, -10 to 10V, 12-bit
M-4212 2 analog outputs, 0 to 5V, 12-bit
Power Modules
M-7001 System power expansion module, 1.0A/24 VDC
M-7002 Field power distributor module
M-7803 Potential distributor module, 8-ch, shield signal
M-7804 Potential distributor module, 8-ch, 0 VDC
M-7805 Potential distributor module, 8-ch, 24 VDC
M-7806 Potential distributor module, 4-ch/24 VDC, 4-ch/0 VDC
Accessories for Modular Remote I/OAccessories
TB 1600 DIN-Rail mounting screw terminal module with 20-pin connector
Flat Cable 20-pin to 20-pin flat cable
M-8001-PK Removable terminal block, 9 pcs per pack
M-8003-PK Marker with 0 to 9 numbering, white color, 100 pcs per pack
M-8004-PK Blank marker, 100 pcs per pack
IP CamerasVPort 25 Series
VPort 25-CAM3S52N Fixed Dome IP camera for outdoors with 1/3" SuperHAD camera sensor and NTSC modulation
VPort 25-CAM3S52P Fixed Dome IP camera for outdoors with 1/3" SuperHAD camera sensor and PAL modulation
VPort 25-CAM3E52N Fixed Dome IP camera for outdoors with 1/3" Exview camera sensor and NTSC modulation
VPort 25-CAM3E52P Fixed Dome IP camera for outdoors with 1/3" Exview camera sensor and PAL modulation
Video ServersVPort 354 Series
VPort 354 Full motion, 4-channel MJPEG/MPEG4 industrial video encoder with 2 10/100BaseT(X) ports, 0 to 60°C
VPort 354-MM-SC Full motion, 4-channel MJPEG/MPEG4 industrial video encoder with 2 multi-mode ports with SC connectors, 0 to 60°C
VPort 354-SS-SC Full motion, 4-channel MJPEG/MPEG4 industrial video encoder with 2 single-mode ports with SC connectors, 0 to 60°C
VPort 354-T Full motion, 4-channel MJPEG/MPEG4 industrial video encoder with 2 10/100BaseT(X) ports, -40 to 75°C
VPort 354-MM-SC-T Full motion, 4-channel MJPEG/MPEG4 industrial video encoder with 2 multi-mode ports with SC connectors, -40 to 75°C
VPort 354-SS-SC-T Full motion, 4-channel MJPEG/MPEG4 industrial video encoder with 2 single-mode ports with SC connectors, -40 to 75°C
VPort 351 Series
VPort 351 Full motion, 1-channel MJPEG/MPEG4 industrial video encoder with 1 10/100BaseT(X) port, 0 to 60°C
VPort 351-M-SC Full motion, 1-channel MJPEG/MPEG4 industrial video encoder with 1 multi-mode port with SC connector, 0 to 60°C
VPort 351-S-SC Full motion, 1-channel MJPEG/MPEG4 industrial video encoder with 1 single-mode port with SC connector, 0 to 60°C
VPort 351-T Full motion, 1-channel MJPEG/MPEG4 industrial video encoder with 1 10/100BaseT(X) port, -40 to 75°C
VPort 351-M-SC-T Full motion, 1-channel MJPEG/MPEG4 industrial video encoder with 1 multi-mode port with SC connector, -40 to 75°C
VPort 351-S-SC-T Full motion, 1-channel MJPEG/MPEG4 industrial video encoder with 1 single-mode port with SC connector, -40 to 75°C
Video Networking Products
emai l : [email protected] www.moxa.com 12-10
0
12
10
OverviewOrdering Inform
ation M
edia Converters
9
8
Modular
Remote I/O
7
Peer-to-PeerI/O
6
Active Ethernet I/O
5
Wireless
Ethernet
4
3
2
1
VideoNetworkingProducts
Modular
EthernetSwitches
Unmanaged
EthernetSwitches
Rackmount
EthernetSwitches
Managed
EthernetSwitches
11
AccessoriesAppendix Product Ordering Information
VPort 3310 Series
VPort 3310 Rugged 1-channel MPEG4 industrial video server with 24 VDC redundant power inputs, 0 to 60°C
VPort 3310-T Rugged 1-channel MPEG4 industrial video server with 24 VDC redundant power inputs, -40 to 75°C
VPort 251
VPort 251 Full motion, 1-channel MJPEG/MPEG4 video encoder, 0 to 60°C
VPort 2141
VPort 2141 4-channel MJPEG video server with 100-240V power adaptor (12 VDC, 1.5A, or 12 VDC, 1.25A for UK plug)
VPort D351
VPort D351 1-channel MJPEG/MPEG4 industrial video decoder with 12/24 VDC and 24 VAC redundant power inputs, 0 to 60°C
IP Surveillance SoftwareSoftNVR
SoftNVR Advanced IP surveillance software for managing up to 64 video channels
SoftDVR™ Pro
SoftDVR™ Pro Easy-to-use IP surverillance software for managing up to 16 video channels
IMC-101G Series
IMC-101G Industrial 10/100/1000BaseT(X) to 1000BaseSX/LX/LHX/ZX media converter; an SFP-1G series Gigabit Ethernet module must be purchased separately for the 1000BaseSX/LX/LHX/ZX side, 0 to 60°C
IMC-101G-T Industrial 10/100/1000BaseT(X) to 1000BaseSX/LX/LHX/ZX media converter; an SFP-1G series Gigabit Ethernet module must be purchased separately for the 1000BaseSX/LX/LHX/ZX side, -40 to 75°C
NOTE: See the SFP-1G series ordering information for available SFP Gigabit Ethernet modules.
IMC-101 Series
IMC-101-M-SC Industrial 10/100BaseT(X) to 100BaseFX media converter; the 100BaseFX side uses a multi-mode port with SC connector, 0 to 60°C
IMC-101-M-ST Industrial 10/100BaseT(X) to 100BaseFX media converter; the 100BaseFX side uses a multi-mode port with ST connector, 0 to 60°C
IMC-101-S-SC Industrial 10/100BaseT(X) to 100BaseFX media converter; the 100BaseFX side uses a single-mode port with SC connector, 0 to 60°C
IMC-101-S-SC-80 Industrial 10/100BaseT(X) to 100BaseFX media converter; the 100BaseFX side uses a single-mode port with SC connector for 80 km transmission,0 to 60°C
IMC-101-M-SC-T Industrial 10/100BaseT(X) to 100BaseFX media converter; the 100BaseFX side uses a multi-mode port with SC connector, -40 to 75°C
IMC-101-M-ST-T Industrial 10/100BaseT(X) to 100BaseFX media converter; the 100BaseFX side uses a multi-mode port with ST connector, -40 to 75°C
IMC-101-S-SC-T Industrial 10/100BaseT(X) to 100BaseFX media converter; the 100BaseFX side uses a single-mode port with SC connector, -40 to 75°C
IMC-101-S-SC-80-T Industrial 10/100BaseT(X) to 100BaseFX media converter; the 100BaseFX side uses a single-mode port with SC connector for 80 km transmission, -40 to 75°C
IMC-21 Series
IMC-21-M-SC Entry-level Industrial 10/100BaseT(X) to 100BaseFX media converter; the 100BaseFX side uses a multi-mode port with SC connector, -10 to 60°C
IMC-21-M-ST Entry-level Industrial 10/100BaseT(X) to 100BaseFX media converter; the 100BaseFX side uses a multi-mode port with ST connector, -10 to 60°C
IMC-21-S-SC Entry-level Industrial 10/100BaseT(X) to 100BaseFX media converter; the 100BaseFX side uses a single-mode port with SC connector, -10 to 60°C
IMC-21-M-ST-FL Entry-level Industrial 10/10BaseT to 10BaseFL media converter; the 10BaseFL side uses a multi-mode port with ST connector, -10 to 60°C
Automatic Backup Configurator
ABC-01 Configuration backup and restoration tool for managed Ethernet switches (plugs directly into the RS-232 console port)
DIN-Rail Power Supplies
DR-4524 45W/2A DIN-Rail 24 VDC power supply with universal 85 to 264 VAC input
DR-75-24 75W/3.2A DIN-Rail 24 VDC power supply with universal 85 to 264 VAC input
DR-120-24 120W/5A DIN-Rail 24 VDC power supply with universal 88 to 132 VAC or 176 to 264 VAC input by switch
Accessories
Industrial Media Converters
www.moxa.com emai l : [email protected] 12-11
Industrial Ethernet Solutions for Control and Automation
12
AppendixProduct O
rdering Information
DR-75-48 75W/1.6A DIN-Rail 48 VDC power supply with universal 85 to 264 VAC input
DR-120-48 120W/2.5A DIN-Rail 48 VDC power supply with universal 88 to 132 VAC or 176 to 264 VAC input by switch
Mounting Kits
WK-32 Wall mounting kit for EDS-828/728 series
WK-46 Wall mounting kit
RK-4U 4U-high 19” rack mounting kit
DK-M12-305 DIN-Rail mounting kit for EDS-305-M12 series
DK-35A DIN-Rail mounting kit for VPort 251/2141 series
Multimode Optical Fiber Patch Cords
PA-MM(62.5)-SCSC-1M Optical Fiber Patch cord, full duplex Multi Mode 62.5 microns, SC to SC connector, 1 meter
PA-MM(62.5)-SCSC-3M Optical Fiber Patch cord, full duplex Multi Mode 62.5 microns, SC to SC connector, 3 meters
PA-MM(62.5)-SCSC-5M Optical Fiber Patch cord, full duplex Multi Mode 62.5 microns, SC to SC connector, 5 meters
PA-MM(62.5)-SCSC-10M Optical Fiber Patch cord, full duplex Multi Mode 62.5 microns, SC to SC connector, 10 meters
PA-MM(62.5)-STST-1M Optical Fiber Patch cord, full duplex Multi Mode 62.5 microns, ST to ST connector, 1 meter
PA-MM(62.5)-STST-3M Optical Fiber Patch cord, full duplex Multi Mode 62.5 microns, ST to ST connector, 3 meters
PA-MM(62.5)-STST-5M Optical Fiber Patch cord, full duplex Multi Mode 62.5 microns, ST to ST connector, 5 meters
PA-MM(62.5)-STST-10M Optical Fiber Patch cord, full duplex Multi Mode 62.5 microns, ST to ST connector, 10 meters
PA-MM(62.5)-SCST-1M Optical Fiber Patch cord, full duplex Multi Mode 62.5 microns, SC to ST connector, 1 meter
PA-MM(62.5)-SCST-3M Optical Fiber Patch cord, full duplex Multi Mode 62.5 microns, SC to ST connector, 3 meters
PA-MM(62.5)-SCST-5M Optical Fiber Patch cord, full duplex Multi Mode 62.5 microns, SC to ST connector, 5 meters
PA-MM(62.5)-SCST-10M Optical Fiber Patch cord, full duplex Multi Mode 62.5 microns, SC to ST connector, 10 meters
emai l : [email protected] www.moxa.com 12-12
0
12
10
OverviewOrdering Inform
ation M
edia Converters
9
8
Modular
Remote I/O
7
Peer-to-PeerI/O
6
Active Ethernet I/O
5
Wireless
Ethernet
4
3
2
1
VideoNetworkingProducts
Modular
EthernetSwitches
Unmanaged
EthernetSwitches
Rackmount
EthernetSwitches
Managed
EthernetSwitches
11
AccessoriesAppendix Product Ordering Information
Notes
Moxa offers a wide selection of industrial managed Ethernet switches that exhibit high reliability, great performance, modularity,
and security, for the widest range of industrial applications (e.g., utility automation, transportation automation, manufacturing
automation). Moxa’s managed Ethernet switches feature Gigabit-speed, high fault-tolerant rings (recover time < 20 ms), and many
advanced management features, such as VLAN, QoS, IGMP snooping, SNMP, and RMON, for enhanced network management.
Attractive security features include the versatility of IEEE802.1X, HTTPS, and SSH.
Industrial-grade capability plus a high MTBF value make Moxa’s unmanaged Ethernet switches the ideal choice for applications that
rarely need to be reconfigured. Important features include redundant power inputs, Class 1, Div. 2/Zone 2 certification for hazardous
environments, wide operating temperature models (-40 to 75°C), relay output alarm for port breaks and power failure, and long-haul
transmission capability up to 80 km. Also available are the PoE (Power-over-Ethernet) unmanaged Ethernet switches that simplify
wiring in industrial environments, and M12/IP67 Ethernet switches for the toughest applications.
Moxa’s rackmount Ethernet solutions provide a reliable and open network infrastructure that allows the various systems used
with today’s industrial automation applications to communicate effectively, resulting in highest level of reliability and availability
for communications. For large-scale or outdoor application sites, long distance, EMI immune transmission requirements between
communication points can be easily met. Moxa offers two product lines with PowerTrans IEC 61850-3 rackmount Ethernet switches
and IKS series industrial rackmount Ethernet switches - that are ideal for setting up diverse automation applications, such as
substation automation, traffic control, marine & offshore, and more.
Wireless networks are becoming increasingly popular for industrial applications due to the savings that can be realized by using
fewer cables. Moxa’s Industrial Wireless AP/Bridge/AP Clients are IEEE802.11a/b/g compatible, and provide powerful security
with WPA/WPA2/802.1X/MAC address filtering. Additional features include redundant power inputs, a wide operating temperature
range from -40 to 75°C, support for PoE (Power-over-Ethernet), an IP68/67/30 metal case, and DIN-Rail mounting capability. The
enhanced reliability of these products makes them a great choice for your wireless industrial applications.
Moxa’s user-friendly Ethernet I/O simplifies industrial IT integration by connecting simple sensors, switches, gauges, LEDs, alarms,
and similar devices to an automation system. Choose from Moxa’s wide spectrum of I/O solutions, which include Active Ethernet
I/O, peer-to-peer Ethernet I/O, serial I/O, and modular remote I/O, for any PC-based data acquisition and control application. Active
Ethernet I/O is a new concept for transmitting I/O data proactively over an open network. Absolutely no programming is required to
configure the I/O’s control logic due to the patented and intuitive Click&Go™ interface.
Video networking products are used to enable remote video surveillance from anywhere on an Ethernet network. The combination
of Moxa’s industrial-strength VPort series video encoder, video decoder, IP cameras, and IP surveillance software gives you a
complete video-over-IP surveillance system that lets you take complete control of field cameras and traditional CCTV systems.
Moxa’s video products have important built-in features, such as redundant power inputs, -40 to 75°C operating range, IP66/30
protection, and DIN-Rail mounting, making these products suitable for any mission-critical industrial applications.
Moxa’s industrial-grade media converters are designed to convert Ethernet data to fiber optic signals, which can be a very cost-
effective way to extend transmission distance. By converting to fiber optic media, Ethernet data can be transmitted over distances
up to 80 km while enjoying superior EMI immunity. The industrial Ethernet-to-fiber media converters also can operate reliably in
extreme temperatures, and are an ideal combination for many industrial applications.
Moxa’s industrial Ethernet products are specially tailored for industrial environments that require a more rugged type of Ethernet solution. Moxa offers a wide
selection of Ethernet networking products, including managed/unmanaged/rackmount Ethernet switches, wireless AP/Bridge/AP client, Active Ethernet I/O,
industrial video networking products, and Ethernet-to-fiber media converters. Moxa’s products emphasize high reliability and stability for high-availability
markets by supporting advanced hardware and software features. With Moxa’s industry-leading networking products, system integrators can get a “one stop
shopping” solution for building a robust, redundant Ethernet platform with high-quality transmission and resilience.