Catalog Implantium
Transcript of Catalog Implantium
-
7/26/2019 Catalog Implantium
1/128
Unit:mm, Scale 1: 1.5 / mm
SuperLine & Implantium Product Catalog 1
SuperLine & ImplantiumProduct/Manual Catalog
-
7/26/2019 Catalog Implantium
2/128
SuperLine & Implantium
-
7/26/2019 Catalog Implantium
3/128
IntroductionS.L.A. Surface 04
SuperLine Characteristics 06
SuperLine Color Coding by Diameter 08SuperLine Fixture 09
IMPLANTIUM Characteristics 12
IMPLANTIUM Color Coding by Diameter 14
IMPLANTIUM Fixture 15
Surgical ComponentsCover Screw 16
Healing Abutment 17
Prosthetic Procedure 1Dual / Combi Abutment - Abutment Level Impression 18
Combi Abutment 19
Dual Abutment [Hex] 20
Dual Abutment [Non-hex] 21
Abutment Level Impression Components 22
Restorative Kit 23
Prosthetic Procedure 2Dual / Custom / Dual Milling / Angled / Direct-Casting /
Metal-Casting / Temporary (Plastic & T i) Abutment
- Fixture Level Impression 24
Fixture Level Impression Components 25
Custom Abutment 27
Dual Milling Abutment [Ti-G4] 28
Dual Milling Abutment [Ti-G2] 30
Angled Abutment[Ti-G4 / 15] 32
Angled Abutment[Ti-G4 / 25] 33
Angled Abutment[Ti-G2 / 15] 34
Angled Abutment[Ti-G2 / 25] 35
Direct-Casting Abutment 36
Metal-Casting Abutment 36
Temporary Abutment 37
Prosthetic Procedure 3Screw Abutment -Abutment Level Impression 38
Screw Abutment 39Angled Screw Abutment 40
Screw Abutment Impression Components 41
Prosthetic Procedure 4Overdenture Procedure
- Positioner / Mini Ball / Magnetic Attachment 44
Positioner 45
Mini Ball Attachment 47
Magnetic Attachment (Dome Type) 48
Magnetic Attachment (Flat Type) 49
InstrumentsSurgical Kit (Full) 50
Surgical Kit (Standard) 51
Surgical Kit (Short Implant) 52
Drill Stopper Kit 53
Drill 54
Stopper 58
Instrument 59
DASK 62
Sinus Bur Kit / Sinus Kit 63
DASK / Sinus Bur Kit / Sinus Kit 64
Osteotome Kit 65
Trephine Kit 66
Prosthetic Kit 67
Planning Kit 68
Prosthetic and Laboratory Instrument 69
Help Kit 71
Surgical Manual 72Prosthesis Manual 82
Contents
-
7/26/2019 Catalog Implantium
4/128
SuperLine & Implantium Product Catalog04
S.L.A. SurfaceS.L.A. (Sandblasting with large grit and acid etching)
Higher bone-to-implant contact. Faster bone formation on the surface.
In vivo test
-
7/26/2019 Catalog Implantium
5/128
-
7/26/2019 Catalog Implantium
6/128
SuperLine & Implantium Product Catalog06
SuperLine Characteristics
"Immediate Implantation with Excellent Bone Response"
Higher stabilization in extraction socket
Early loading in upper posterior
Harmony with anatomy
Sharp & fast insertion
A
D
B
C
Platform
Body
Abutment
G/H
FixtureLength
Selection Guideline
Ideal emergence profile for each tooth
Bevel
Abutment
AbutmentHeight
-
7/26/2019 Catalog Implantium
7/128
SuperLine & Implantium Product Catalog 07
SuperLine Characteristics
B
The conical hex connection between implant and
abutment interface ensures hermetic sealing.
The biologic connection distributes the load to the
fixture evenly. Therefore it helps minimize
micro-movement and marginal bone loss.
All implant diameters share the same internal hex.
Biological Connection C-1
Increased thread height helps increase the initial stability.
Double thread may decrease the chair time of implantation
Double Thread & Thread Height
D Prosthesis
One abutment screw fits all abutments and fixture platforms.
Single abutment connection is used for all implant diameters.
One hex screw driver fits all abutment screws
The greater distance between
the threads may promote early
osseointegration
C-2 Osseointegration
Dual Milling Angled Direct Screw
A Tapered Design
Tapered load distribution may achieve excellent
bone response.
Tapered design may harmonize with surrounding
bone anatomically.
The large surface area helps provide excellent
initial stability with sinus augmentation.
-
7/26/2019 Catalog Implantium
8/128
SuperLine & Implantium Product Catalog08
SuperLineColor Coding by Diameter
Color Coding by Diameter
Cap Color
Fixture
SuperLine
(Mount Free)
Fixture
Platform
Diameter
(Unit: mm)
Platform
Cover screw is not included.
L : 7
Fixture
Bevel
Height
Fixture
Body
Diameter
Body
Bevel
Yellow Green Blue Red Orange Violet
3.7 4.0 4.5 5.0 6.0 7.0
3.6 4.0 4.5 5.0 5.0 5.8
1.5 1.5 1.5 1.5 1.5 1.5
0 0.1 0.3 0.4 0.7 1.0
L : 8, 10,
12, 14
Fixture
Bevel
Height
Bevel
-
7/26/2019 Catalog Implantium
9/128
SuperLine & Implantium Product Catalog 09
SuperLine FixtureUnit: mm, Scale 1 : 1.5 / mm
3.7
L
L
3.6
4.0
4.0
Platform5.0 | Body 5.0
Platform4.5 | Body 4.508 10 12 14
4.5
L
L
4.5
5.0
5.0
L Art. No.
7 FXS 45 07
8 FXS 45 08
10 FXS 45 10
12 FXS 45 12
14 FXS 45 14
L Art. No.
7 FXS 50 07
8 FXS 50 08
10 FXS 50 10
12 FXS 50 12
14 FXS 50 14
070.3 0.3 0.3 0.3
1.5
08 10 12 14070.4 0.4 0.4 0.41.5
08 10 12 14070.1 0.1 0.1 0.1
08 10 12 1407
Platform4.0 | Body 4.0
L Art. No.
7 FXS 40 07
8 FXS 40 08
10 FXS 40 10
12 FXS 40 12
14 FXS 40 14
Platform3.7 | Body 3.6
L Art. No.
7 FXS 36 07
8 FXS 36 08
10 FXS 36 10
12 FXS 36 12
14 FXS 36 14
Note: 1) To prevent damage to the Implant driver or fixture, do not over torque during fixture insertion
1.5
1.5
-
7/26/2019 Catalog Implantium
10/128
SuperLine & Implantium Product Catalog10
SuperLine FixtureUnit: mm, Scale 1 : 1.5 / mm
1.0
Platform7.0 | Body 5.8 7.0
L
5.8
Platform6.0 | Body 5.0
L
5.0
6.008 10 1207
1.5
08 10 12071.5
0.70.70.7
1.01.0
L Art. No.
7 FXS 60 07
8 FXS 60 08
10 FXS 60 10
12 FXS 60 12
L Art. No.
7 FXS 70 07
8 FXS 70 08
10 FXS 70 10
12 FXS 70 12
-
7/26/2019 Catalog Implantium
11/128
-
7/26/2019 Catalog Implantium
12/128
SuperLine & Implantium Product Catalog12
Implantium Characteristics
Selection Guideline
Ideal emergence profile for each tooth
E
G
A
D
B
C
F
Platform
Body
Final Drill
Neck
Bevel
Abutment
G/H
AbutmentHeight
FixtureLength
3
Maximum
Reduction Line
Abutment
-
7/26/2019 Catalog Implantium
13/128
SuperLine & Implantium Product Catalog 13
Implantium Characteristics
G Maintained Compatibility
Prosthetic componentsand Surgical Kit 100%
compatible with the existing ImplantiumImplant System
C Biological Connection
The conical hex connection between implant and abutment
interface ensures hermetic sealing.
The biologic connection distributes the load to the fixture
evenly. Therefore it helps minimize micro-movement and
marginal bone loss.
All implant diameters share the same internal hex.
Quadruple & Double thread Design
Chair time decreased through faster fixture placement
E
F Optimal Fixation Threads
Greater advantage for Immediate and Early Loading
Enhanced initial stability through longer and sharper
threading
Biological Thread
Thread platform design creates excellent bone to
implant contact.
Threads engage and penetrate bone with ease.
D
Longer and Upgraded Cutting
EdgeA
Improved self-tapping ability
Allows more control over the depth of
fixture placement
Alleviates the occurrence of over-torque
during placement in dense bone
Bacteria Resistant Bevel
The tapered bevel platform design may make bone
profiling unnecessary at 1st, 2nd surgery.
B
-
7/26/2019 Catalog Implantium
14/128
SuperLine & Implantium Product Catalog14
Implantium Color Coding by Diameter
Color Coding by Diameter
Cap Color
Fixture
Implantium
(Mount Free)
Fixture
Platform
Diameter
(Unit: mm)
Platform
Cover screw is not included.
Fixture
Body
Diameter
Body
Yellow Green Blue Red
3.6 4.0 4.5 5.0
3.6 4.0 4.5 5.0
Fixture
Bevel
Height
Bevel
0.15 0.11 0.25 0.4
-
7/26/2019 Catalog Implantium
15/128
SuperLine & Implantium Product Catalog 15
Implantium FixtureUnit: mm, Scale 1 : 1.5 / mm
08 10 12 143.6
L
3.6
Platform3.6 | Body 3.6
L Art. No.
8 FXI 36 08
10 FXI 36 10
12 FXI 36 12
14 FXI 36 14
4.0
L
4.0
4.5
L
4.5
5.0
L
5.0
08 10 12 14
Platform4.0 | Body 4.0
L Art. No.
8 FXI 40 08
10 FXI 40 10
12 FXI 40 12
14 FXI 40 14
08 10 12 14
Platform4.5 | Body 4.5
L Art. No.
8 FXI 45 08
10 FXI 45 10
12 FXI 45 12
14 FXI 45 14
08 10 12 14
Platform5.0 | Body 5.0
L Art. No.
8 FXI 50 08
10 FXI 50 10
12 FXI 50 12
14 FXI 50 14
Note: 1) To prevent damage to the Implant driver or fixture, do not over torque during fixture insertion
-
7/26/2019 Catalog Implantium
16/128
SuperLine & Implantium Product Catalog16
Healing Abutment
Cover ScrewUnit: mm, Scale 1 : 1.5 / mm
Unit: mm, Scale 1 : 1.5 / mm
Hex driver: Use no more than 5Ncm torque when screwing a cover screw to a fixture.
If hex is worn, slot on the head of the product can be used to rotate it.
Color: Green 3.6
Art. No. CS36
CS36 andFXS4510
4.5
3.6
Single use only
Single use only4.5
G/H 3.0H 5.0
HAB453050L andFXS4510
-
7/26/2019 Catalog Implantium
17/128
SuperLine & Implantium Product Catalog 17
3.8
2.0
Hex driver: Use no more than 10Ncm of torque when screwing a healing abutment to a fixture.
If hex is worn, slot on the head of the product can be used to rotate it.
Diameter 4.0
Diameter 3.3 / 3.8
G/H H Art. No.
2.0 2.0 HAB 40 20 20 L
2.0 3.5 HAB 40 20 35 L
3.0 5.0 HAB 40 30 50 L
4.0 7.0 HAB 40 40 70 L
G/H Art. No.
3.5 GBHAB 33 35
0.5 GBHAB 38 05
2.0 GBHAB 38 20
6.56.5
6.5
3.52.0
5.03.0
7.04.0
4.04.0 4.0
3.52.0
5.03.0
7.04.0
4.54.5
4.5
3.5 5.0
3.0
7.04.0
5.55.5
5.5
3.52.0
5.03.0
7.04.0
7.5
5.03.0
4.0
2.0
3.5
0.52.0
4.5
5.5
6.5
Diameter 4.5
G/H H Art. No.
2.0 2.0 HAB 45 20 20 L
2.0 3.5 HAB 45 20 35 L
3.0 5.0 HAB 45 30 50 L
4.0 7.0 HAB 45 40 70 L
Diameter 5.5
G/H H Art. No.
2.0 2.0 HAB 55 20 20 L
2.0 3.5 HAB 55 20 35 L
3.0 5.0 HAB 55 30 50 L
4.0 7.0 HAB 55 40 70 L
Diameter 6.5
G/H H Art. No.
2.0 2.0 HAB 65 20 20 L
2.0 3.5 HAB 65 20 35 L
3.0 5.0 HAB 65 30 50 L
4.0 7.0 HAB 65 40 70 L
Diameter 7.5 / 8.5 / 9.5
G/H H Art. No.
3.0 5.0 HAB 75 30 50 L
3.0 5.0 HAB 85 30 50 L
3.0 5.0 HAB 95 30 50 L
8.5
5.03.0
9.5
5.03.0
2.02.0
2.0
2.0
3.8
-
7/26/2019 Catalog Implantium
18/128
SuperLine & Implantium Product Catalog18
Prosthetic Procedure 1
Dual / Combi Abutment
Closed Tray Technique
Cemented Restoration
Modification
Abutment Level Impression
Burn-out Cylinder
Impression Coping
Transfer (Snap on)4.5 / 5.5 / 6.5
Page22
Analog
Long 4.5 / 5.5 / 6.5
Page22
Analog
Short 4.5 / 5.5 / 6.5
Page22
Bridge
Rotational
4.5 / 5.5 / 6.5
Page22
Single
Non-rotational
4.5 / 5.5 / 6.5
Page22
Dual Abutment
Hex / Non-hex 4.5 / 5.5 / 6.5
Page20, 21
Combi Abutment
4.5 / 5.5 / 6.5
Page19
Impression Technique and Restoration Selection
-
7/26/2019 Catalog Implantium
19/128
SuperLine & Implantium Product Catalog 19
Combi AbutmentUnit: mm, Scale 1 : 1 / mm
G/H 3.5
5.5
5.5
1.5
CAB5535L andFXS4510
G/H 3.5
4.0
5.5
CAB5535SL andFXS4510
1.0 1.5 2.5 3.5 4.5 5.5
1.5 2.5 3.5 4.5 5.5
G/H Art. No. Art. No
1.0 CAB 45 10 SL CAB 45 10 L
1.5 CAB 45 15 SL CAB 45 15 L
2.5 CAB 45 25 SL CAB 45 25 L
3.5 CAB 45 35 SL CAB 45 35 L 4.5 CAB 45 45 SL CAB 45 45 L
5.5 CAB 45 55 SL CAB 45 55 L
Diameter 4.5
Type
Short
Type
Long
G/H Art. No. Art. No
1.5 CAB 55 15 SL CAB 55 15 L
2.5 CAB 55 25 SL CAB 55 25 L
3.5 CAB 55 35 SL CAB 55 35 L
4.5 CAB 55 45 SL CAB 55 45 L
5.5 CAB 55 55 SL CAB 55 55 L
Diameter 5.5
Type
Short
Type
Long
1.5 2.5 3.5 4.5 5.5
G/H Art. No. Art. No
1.5 CAB 65 15 SL CAB 65 15 L
2.5 CAB 65 25 SL CAB 65 25 L
3.5 CAB 65 35 SL CAB 65 35 L
4.5 CAB 65 45 SL CAB 65 45 L
5.5 CAB 65 55 SL CAB 65 55 L
Diameter 6.5
Type
Short
Type
Long
G/H
G/H
G/H
5.5
4.0
G/H
G/H
Note: 1) If the Implantium fixture with size of 3.4 body is used, abutment height after assembly will become 0.5mm longer
than other sized fixtures.
2) It is recommended to keep the torque level at 25~30 Ncm to tighten the combi abutment with fixture.
5.5
4.0
G/H
G/H
5.5
4.0
G/H
G/H
-
7/26/2019 Catalog Implantium
20/128
SuperLine & Implantium Product Catalog20
Dual Abutment [Hex]Unit: mm, Scale 1 : 1.5 / mm
G/H 3.5
5.5
5.5
1.5
G/H Art. No.
1.0 DAB 45 10 HL
1.5 DAB 45 15 HL
2.5 DAB 45 25 HL 3.5 DAB 45 35 HL
4.5 DAB 45 45 HL
5.5 DAB 45 55 HL
1.0 1.5 2.5 3.5 4.5 5.5
Diameter4.5 | Hex
G/H Art. No.
1.5 DAB 55 15 HL
2.5 DAB 55 25 HL
3.5 DAB 55 35 HL
4.5 DAB 55 45 HL
5.5 DAB 55 55 HL
1.5 2.5 3.5 4.5 5.5
Diameter5.5 | Hex
DAB5535HL andFXS4510
G/H Art. No.
1.5 DAB 65 15 HL
2.5 DAB 65 25 HL
3.5 DAB 65 35 HL
4.5 DAB 65 45 HL
5.5 DAB 65 55 HL
1.5 2.5 3.5 4.5 5.5
Diameter6.5 | Hex
G/H
G/H
G/H
G/H
5.5
G/H
5.5
G/H
5.5
Abutment screw is included.
Note: 1) If the Implantium fixture with size of 3.4 body is used, abutment height after assembly will become 0.5mm longer
than other sized fixtures.
2) It is recommended to keep the torque level at 25~30 Ncm to tighten the dual abutment with fixture.
-
7/26/2019 Catalog Implantium
21/128
SuperLine & Implantium Product Catalog 21
Dual Abutment [Non-hex]Unit: mm, Scale 1 : 1.5 / mm
G/H 3.5
5.5
5.5
1.5
G/H Art. No.
1.0 DAB 45 10 NL
1.5 DAB 45 15 NL
2.5 DAB 45 25 NL 3.5 DAB 45 35 NL
4.5 DAB 45 45 NL
5.5 DAB 45 55 NL
1.0 1.5 2.5 3.5 4.5 5.5
Diameter 4.5 | Non-hex
G/H Art. No.
1.5 DAB 55 15 NL
2.5 DAB 55 25 NL
3.5 DAB 55 35 NL
4.5 DAB 55 45 NL
5.5 DAB 55 55 NL
1.5 2.5 3.5 4.5 5.5
Diameter 5.5 | Non-hex
DAB5535NL andFXS4510
G/H Art. No.
1.5 DAB 65 15 NL
2.5 DAB 65 25 NL
3.5 DAB 65 35 NL
4.5 DAB 65 45 NL
5.5 DAB 65 55 NL
1.5 2.5 3.5 4.5 5.5
Diameter 6.5 | Non-hex
G/H
G/H
G/H
G/H
5.5
G/H
5.5
G/H
5.5
Abutment screw is included.
Note: 1) If the Implantium fixture with size of 3.4 body is used, abutment height after assembly will become 0.5mm longer
than other sized fixtures.
2) It is recommended to keep the torque level at 25~30 Ncm to tighten the dual abutment with fixture.
-
7/26/2019 Catalog Implantium
22/128
SuperLine & Implantium Product Catalog22
Abutment Level Impression Components
Unit: mm, Scale 1 : 1 / mm
4.5 5.5 6.5 Diameter Art. No.
4.5 CIC 45 L
5.5 CIC 55 L
6.5 CIC 65 L
Impression Coping
Comfort Cap | Snap on
4.5 5.5 6.5
4.8
Type Diameter Art. No.
4.5 CCC 45 CS
Short 5.5 CCC 55 CS
6.5 CCC 65 CS
4.5 CCC 45 C
Long 5.5 CCC 55 C
6.5 CCC 65 C
6.8
10.4
Lab Analog
Type Diameter Art. No.
4.5 CAN 45 SL
Short 5.5 CAN 55 SL
6.5 CAN 65 SL
4.5 CAN 45 LL
Long 5.5 CAN 55 LL
6.5 CAN 65 LL
Burn-out Cylinder
Type Diameter Art. No.
4.5 CBC 45 SL
Single 5.5 CBC 55 SL
6.5 CBC 65 SL
4.5 CBC 45 BL
Bridge 5.5 CBC 55 BL
6.5 CBC 65 BL
4.5 5.5 6.5
4.0
12.0
5.5
12.0
4.5 5.5 6.5
12.8
12.8
-
7/26/2019 Catalog Implantium
23/128
SuperLine & Implantium Product Catalog 23
Restorative Kit
Lab. Components
Comfort Cap Impression Coping Analog Burn-out Cylinder
XSDAB 45 S CCC 45 CSCIC 45L
CAN 45 SLCBC 45 SL CBC 45 BL
XSDAB 45 CCC 45 C CAN 45 LL
XSDAB 55 S CCC 55 CSCIC 55L
CAN55 SLCBC 55 SL CBC 55 BL
XSDAB 55 CCC 55 C CAN 55 LL
XSDAB 65 S CCC 65 CSCIC 65L
CAN 65 SLCBC 65 SL CBC 65 BL
XSDAB 65 CCC 65 C CAN 65 LL
Combi & Dual Abutment
Art. No
-
7/26/2019 Catalog Implantium
24/128
SuperLine & Implantium Product Catalog24
Prosthetic Procedure 2
Dual / Custom / Dual Milling / Angled / Direct-Casting /
Metal-Casting / Temporary (Plastic & Ti) Abutment
Fixture Level Impression
Impression Coping Transfer
Closedtray technique (Simple case)
4.0 / 4.5 / 5.5 / 6.5
Page26
Hex Non-hex
Screw-Retained
Restoration
Modification
Modification
DualAbutment
Hex / Non-hex
4.5 / 5.5 / 6.5
Page20, 21
CustomAbutment
Hex / Non-hex
4.5 / 5.5
Page27
Dual MillingAbutmentHex / Non-hex
4.0 / 4.5
5.5 / 6.5 / 7.5
Page28, 30
Analog
DAN 34 / DANSE
Page25, 26
Impression Technique and Restoration Selection
Cemented
Restoration
AngledAbutmentHex / Non-hex
15 / 25
4.5 / 5.5
Page32, 33, 34, 35
Direct-CastingAbutment
Hex / Non-hex
4.5
Page36
Metal-CastingAbutment
Hex / Non-hex
4.5
Page36
TemporaryAbutment
Hex / Non-hex
4.5 / 5.5 / 6.5
Page37
Hex Non-hex
Impression Coping Pick-up
Opentray technique (Complicated case)
4.0 / 4.5 / 5.5 / 6.5
Page25
-
7/26/2019 Catalog Implantium
25/128
SuperLine & Implantium Product Catalog 25
Unit: mm, Scale 1 : 1.5 / mm
Fixture Level Impression Components
Impression coping screw is included with Impression coping.
Size Art. No.
Short DPS 11
Long DPS 15
Impression Coping Pick-up Screw
Long
Short
Impression Coping Pick-up 4.0
Size Type Art. No.
Short Hex DPU 4011 HL
Short Non-hex DPU 4011 NL
Long Hex DPU 4015 HL
Long Non-hex DPU 4015 NL
4.0 4.0 4.0 4.0
Impression Coping Pick-up 4.5
Size Type Art. No.
Short Hex DPU 4511 HL
Short Non-hex DPU 4511 NL
Long Hex DPU 4515 HL
Long Non-hex DPU 4515 NL
Impression Coping Pick-up 5.5
Size Type Art. No.
Short Hex DPU 5511 HL
Short Non-hex DPU 5511 NL
Long Hex DPU 5515 HL
Long Non-hex DPU 5515 NL
Impression Coping Pick-up 6.5
Size Type Art. No.
Short Hex DPU 6511 HL
Short Non-hex DPU 6511 NL
Long Hex DPU 6515 HL
Long Non-hex DPU 6515 NL
Hex Non-hex Hex Non-hex
17.0 17.0 21.0 21.0
4.5 4.5 4.5 4.5
Hex Non-hex Hex Non-hex
17.0 17.0 21.0 21.0
5.5 5.5 5.5 5.5
Hex Non-hex Hex Non-hex
17.0 17.0 21.0 21.0
6.5 6.5 6.5 6.5
Hex Non-hex Hex Non-hex
17.0 17.0 21.0 21.0
23.0
27.0
12.0
4.0
12.0
4.5
Application (Body) Art. No.
3.4(Only Implantium) DAN 34
3.4 / 3.8 / 4.3 / 4.8 / 5.8 DANSE
Analog
-
7/26/2019 Catalog Implantium
26/128
SuperLine & Implantium Product Catalog26
Unit: mm, Scale 1 : 1.5 / mm
Fixture Level Impression Components
Impression coping screw is included with Impression coping.
Size Art. No.
Short DTS 11
Long DTS 15
Impression Coping Transfer Screw
Impression Coping Transfer 4.0
Size Type Art. No.
Short Hex DTF 4011 HL
Short Non-hex DTF 4011 NL
Long Hex DTF 4015 HL
Long Non-hex DTF 4015 NL
Impression Coping Transfer 4.5
Size Type Art. No.
Short Hex DTF 4511 HL
Short Non-hex DTF 4511 NL
Long Hex DTF 4515 HL
Long Non-hex DTF 4515 NL
Impression Coping Transfer 5.5
Size Type Art. No.
Short Hex DTF 5511 HL
Short Non-hex DTF 5511 NL
Long Hex DTF 5515 HL
Long Non-hex DTF 5515 NL
Impression Coping Transfer 6.5
Size Type Art. No.
Short Hex DTF 6511 HL
Short Non-hex DTF 6511 NL
Long Hex DTF 6515 HL
Long Non-hex DTF 6515 NL
4.0 4.0 4.0 4.0
Hex Non-hex Hex Non-hex
11.0 11.0 15.015.0
4.5 4.5 4.5 4.5
Hex Non-hex Hex Non-hex
11.0 11.015.0 15.0
5.5 5.5 5.5 5.5
Hex Non-hex Hex Non-hex
11.0 11.0 15.0 15.0
6.5 6.5 6.5 6.5
Hex Non-hex Hex Non-hex
11.0 11.0 15.0 15.0
Long
Short
17.0
21.0
12.0
4.0
Application (Body) Art. No.
3.4 (Only Implantium) DAN 34
3.4 / 3.8 / 4.3 / 4.8 / 5.8 DANSE
Analog
12.0
4.5
-
7/26/2019 Catalog Implantium
27/128
SuperLine & Implantium Product Catalog 27
Unit: mm, Scale 1 : 1.5 / mm
Custom Abutment Abutment screw is included.
G/H 1.0
5.5
CDAB5510H andFXS4510
Diameter 4.5
G/H Type Art. No.
0.5 Hex CDAB 45 05 H
0.5 Non-hex CDAB 45 05 N
1.5 Hex CDAB 45 15 H
1.5 Non-hex CDAB 45 15 N
5.5
Note: 1) If the Implantium fixture with size of 3.4 body is used, abutment height after assembly will become 0.5mm longer
than other sized fixtures.
2) It is recommended to keep the torque level at 25~30 Ncm to tighten the custom abutment with fixture.
4.5
Hex
4.5
Non-hex
4.5
Hex
4.5
Non-hex
Diameter 5.5
G/H Type Art. No.
1.0 Hex CDAB 55 10 H
1.0 Non-hex CDAB 55 10 N
2.0 Hex CDAB 55 20 H
2.0 Non-hex CDAB 55 20 N
1.5 1.50.50.5
5.5
Hex
5.5
Non-hex
5.5
Hex
5.5
Non-hex
2.0 2.01.01.0
Top view
5.5
4.5
-
7/26/2019 Catalog Implantium
28/128
SuperLine & Implantium Product Catalog28
Dual Milling Abutment [Ti-G4]Unit:mm, Scale 1: 1.5 / mm Abutment screw is included.
G/H 1.5
12
DAB55157HL andFXS4510
Diameter4.0
Diameter4.5
Diameter5.5
G/H Type Art. No.
1.0 Hex DAB 40 105 HL
1.0 Non-hex DAB 40 105 NL
G/H Type Art. No.
1.5 Hex DAB 45 156 HL
1.5 Non-hex DAB 45 156 NL
G/H Type Art. No.
1.5 Hex DAB 55 157 HL
1.5 Non-hex DAB 55 157 NL
2.5 Hex DAB 55 257 HL
2.5 Non-hex DAB 55 257 NL
4.0
1.0 1.0
Hex
5.5
Note: 1) If the Implantium fixture with size of 3.4 body is used, abutment height after assembly will become 0.5mm longer
than other sized fixtures.
2) It is recommended to keep the torque level at 25~30 Ncm to tighten the dual milling abutment with fixture.
4.0
Non-hex
4.5
1.5
1.5 1.5 2.5 2.5
1.5
Hex
4.5
Non-hex
5.5
Hex
5.5
Non-hex
5.5
Hex
5.5
Non-hex
-
7/26/2019 Catalog Implantium
29/128
SuperLine & Implantium Product Catalog 29
Dual Milling Abutment [Ti-G4]Unit:mm, Scale 1: 1.5 / mm Abutment screw is included.
Diameter 6.5
G/H Type Art. No.
1.5 Hex DAB 65 158 HL
1.5 Non-hex DAB 65 158 NL
2.5 Hex DAB 65 258 HL
2.5 Non-hex DAB 65 258 NL
3.5 Hex DAB 65 358 HL
3.5 Non-hex DAB 65 358 NL
Note: 1) If the Implantium fixture with size of 3.4 body is used, abutment height after assembly will become 0.5mm longer
than other sized fixtures.
2) It is recommended to keep the torque level at 25~30 Ncm to tighten the dual milling abutment with fixture.
Diameter 7.5
G/H Type Art. No.
2.5 Hex DAB 75 259 HL
2.5 Non-hex DAB 75 259 NL
3.5 Hex DAB 75 359 HL
3.5 Non-hex DAB 75 359 NL
6.5
Hex
6.5
Non-hex
6.5
Hex
6.5
Non-hex
6.5
Hex
6.5
Non-hex
7.5
Hex
7.5
Non-hex
7.5
Hex
7.5
Non-hex
1.5 1.5 2.5 2.5
3.5 3.5
2.5 2.53.5 3.5
-
7/26/2019 Catalog Implantium
30/128
SuperLine & Implantium Product Catalog30
Dual Milling Abutment [Ti-G2]Unit: mm, Scale 1 : 1.5 / mm Abutment screw is included.
Note: 1) If the Implantium fixture with size of 3.4 body is used, abutment height after assembly will become 0.5mm longer
than other sized fixtures.
2) It is recommended to keep the torque level at 25~30 Ncm to tighten the dual milling abutment with fixture.
Diameter4.0
Diameter4.5
Diameter5.5
G/H Type Art. No.
1.0 Hex DAB 40 105 HG
1.0 Non-hex DAB 40 105 NG
G/H Type Art. No.
1.5 Hex DAB 45 156 HG
1.5 Non-hex DAB 45 156 NG
G/H Type Art. No.
1.5 Hex DAB 55 157 HG
1.5 Non-hex DAB 55 157 NG
2.5 Hex DAB 55 257 HG
2.5 Non-hex DAB 55 257 NG
4.0
1.0 1.0
Hex
4.0
Non-hex
4.5
1.5 1.5
Hex
4.5
Non-hex
1.5 1.5 2.5 2.5
5.5
Hex
5.5
Non-hex
5.5
Hex
5.5
Non-hex
G/H 1.5
12
DAB55157HG andFXS4510
5.5
-
7/26/2019 Catalog Implantium
31/128
SuperLine & Implantium Product Catalog 31
Unit: mm, Scale 1 : 1.5 / mm
Dual Milling Abutment [Ti-G2]Abutment screw is included.
Note: 1) If the Implantium fixture with size of 3.4 body is used, abutment height after assembly will become 0.5mm longer
than other sized fixtures.
2) It is recommended to keep the torque level at 25~30 Ncm to tighten the dual milling abutment with fixture.
Diameter 6.5
G/H Type Art. No.
1.5 Hex DAB 65 158 HG
1.5 Non-hex DAB 65 158 NG
2.5 Hex DAB 65 258 HG
2.5 Non-hex DAB 65 258 NG
3.5 Hex DAB 65 358 HG
3.5 Non-hex DAB 65 358 NG
Diameter 7.5
G/H Type Art. No.
2.5 Hex DAB 75 259 HG
2.5 Non-hex DAB 75 259 NG
3.5 Hex DAB 75 359 HG
3.5 Non-hex DAB 75 359 NG
6.5
Hex
6.5
Non-hex
6.5
Hex
6.5
Non-hex
6.5
Hex
6.5
Non-hex
1.5 1.5 2.5 2.5
3.5 3.5
7.5
Hex
7.5
Non-hex
7.5
Hex
7.5
Non-hex
2.5 2.53.5 3.5
-
7/26/2019 Catalog Implantium
32/128
SuperLine & Implantium Product Catalog32
Non-hex
2.5
5.5
4.5
Angled Abutment [Ti-G4 / 15]Unit: mm, Scale 1 : 1.5 / mm Abutment screw is included.
G/H 1.5
10.5
15
Hex
Diameter4.5 | Angled 15
AAB154515HL andFXS4510
Diameter5.5 | Angled 15
1.5
4.5
Note: 1) If the Implantium fixture with size of 3.4 body is used, abutment height after assembly will become 0.5mm longer
than other sized fixtures.
2) It is recommended to keep the torque level at 25~30 Ncm to tighten the angled abutment with fixture.
Non-hex
1.5
4.5
Hex
2.5
4.5
Non-hex
2.5
4.5
Hex
3.5
4.5
Non-hex
3.5
4.5
Hex
1.5
5.5
Non-hex
1.5
5.5
Hex
2.5
5.5
Hex
3.5
5.5
Non-hex
3.5
5.5
G/H Type Art. No.
1.5 Hex AAB 15 45 15 HL
1.5 Non-hex AAB 15 45 15 NL
2.5 Hex AAB 15 45 25 HL
2.5 Non-hex AAB 15 45 25 NL
3.5 Hex AAB 15 45 35 HL
3.5 Non-hex AAB 15 45 35 NL
G/H Type Art. No.
1.5 Hex AAB 15 55 15 HL
1.5 Non-hex AAB 15 55 15 NL
2.5 Hex AAB 15 55 25 HL
2.5 Non-hex AAB 15 55 25 NL
3.5 Hex AAB 15 55 35 HL
3.5 Non-hex AAB 15 55 35 NL
-
7/26/2019 Catalog Implantium
33/128
SuperLine & Implantium Product Catalog 33
Unit: mm, Scale 1 : 1.5 / mm
Angled Abutment [Ti-G4 / 25] Abutment screw is included.
Non-hex
2.5
5.5
4.5
G/H 1.5
10.5
25
Hex
Diameter 4.5 | Angled 25
AAB254515HL andFXS4510
Diameter 5.5 | Angled 25
1.5
4.5
Non-hex
1.5
4.5
Hex
2.5
4.5
Non-hex
2.5
4.5
Hex
3.5
4.5
Non-hex
3.5
4.5
Hex
1.5
5.5
Non-hex
1.5
5.5
Hex
2.5
5.5
Hex
3.5
5.5
Non-hex
3.5
5.5
Note: 1) If the Implantium fixture with size of 3.4 body is used, abutment height after assembly will become 0.5mm longer
than other sized fixtures.
2) It is recommended to keep the torque level at 25~30 Ncm to tighten the angled abutment with fixture.
G/H Type Art. No.
1.5 Hex AAB 25 45 15 HL
1.5 Non-hex AAB 25 45 15 NL
2.5 Hex AAB 25 45 25 HL
2.5 Non-hex AAB 25 45 25 NL
3.5 Hex AAB 25 45 35 HL
3.5 Non-hex AAB 25 45 35 NL
G/H Type Art. No.
1.5 Hex AAB 25 55 15 HL
1.5 Non-hex AAB 25 55 15 NL
2.5 Hex AAB 25 55 25 HL
2.5 Non-hex AAB 25 55 25 NL
3.5 Hex AAB 25 55 35 HL
3.5 Non-hex AAB 25 55 35 NL
-
7/26/2019 Catalog Implantium
34/128
SuperLine & Implantium Product Catalog34
Unit: mm, Scale 1 : 1.5 / mm
Angled Abutment [Ti-G2 / 15] Abutment screw is included.
Non-hex
2.5
5.5
4.5
G/H 1.5
10.5
15
Hex
Diameter4.5 | Angled 15
AAB154515HGandFXS4510
Diameter5.5 | Angled 15
1.5
4.5
Note: 1) If the Implantium fixture with size of 3.4 body is used, abutment height after assembly will become 0.5mm longer
than other sized fixtures.
2) It is recommended to keep the torque level at 25~30 Ncm to tighten the angled abutment with fixture.
Non-hex
1.5
4.5
Hex
2.5
4.5
Non-hex
2.5
4.5
Hex
3.5
4.5
Non-hex
3.5
4.5
Hex
1.5
5.5
Non-hex
1.5
5.5
Hex
2.5
5.5
Hex
3.5
5.5
Non-hex
3.5
5.5
G/H Type Art. No.
1.5 Hex AAB 15 45 15 HG
1.5 Non-hex AAB 15 45 15 NG
2.5 Hex AAB 15 45 25 HG
2.5 Non-hex AAB 15 45 25 NG
3.5 Hex AAB 15 45 35 HG
3.5 Non-hex AAB 15 45 35 NG
G/H Type Art. No.
1.5 Hex AAB 15 55 15 HG
1.5 Non-hex AAB 15 55 15 NG
2.5 Hex AAB 15 55 25 HG
2.5 Non-hex AAB 15 55 25 NG
3.5 Hex AAB 15 55 35 HG
3.5 Non-hex AAB 15 55 35 NG
-
7/26/2019 Catalog Implantium
35/128
SuperLine & Implantium Product Catalog 35
Unit: mm, Scale 1 : 1.5 / mm
Angled Abutment [Ti-G2 / 25] Abutment screw is included.
Non-hex
3.5
4.5
Non-hex
2.5
5.5
4.5
G/H 1.5
10.5
25
Hex
Diameter 4.5 | Angled 25
AAB254515HG andFXS4510
Diameter 5.5 | Angled 25
1.5
4.5
Non-hex
1.5
4.5
Hex
2.5
4.5
Non-hex
2.5
4.5
Hex
3.5
4.5
Hex
1.5
5.5
Non-hex
1.5
5.5
Hex
2.5
5.5
Hex
3.5
5.5
Non-hex
3.5
5.5
Note: 1) If the Implantium fixture with size of 3.4 body is used, abutment height after assembly will become 0.5mm longer
than other sized fixtures.
2) It is recommended to keep the torque level at 25~30 Ncm to tighten the angled abutment with fixture.
G/H Type Art. No.
1.5 Hex AAB 25 45 15 HG
1.5 Non-hex AAB 25 45 15 NG
2.5 Hex AAB 25 45 25 HG
2.5 Non-hex AAB 25 45 25 NG
3.5 Hex AAB 25 45 35 HG
3.5 Non-hex AAB 25 45 35 NG
G/H Type Art. No.
1.5 Hex AAB 25 55 15 HG
1.5 Non-hex AAB 25 55 15 NG
2.5 Hex AAB 25 55 25 HG
2.5 Non-hex AAB 25 55 25 NG
3.5 Hex AAB 25 55 35 HG
3.5 Non-hex AAB 25 55 35 NG
-
7/26/2019 Catalog Implantium
36/128
SuperLine & Implantium Product Catalog36
4.5
Unit: mm, Scale 1 : 1.5 / mm
Direct-Casting Abutment / Metal-Casing Abutment
Abutment screw is included.
G/H 1.0
12
4.5
Direct-Casting Abutment | Gold
RAB45GH andFXS4510
4.5G/H 1.0
12
4.5
RAB45CH andFXS4510
Hex
G/H Type Art. No. 1.0 Hex RAB 45 GH
1.0 Non-hex RAB 45 GN
4.5
4.5
12
1.0
Metal-Casting Abutment | Co-Cr
G/H Type Art. No.
1.0 Hex RAB 45 CH
1.0 Non-hex RAB 45 CN
Note: 1) If the Implantium fixture with size of 3.4 body is used, abutment height after assembly will become 0.5mm longer than other
sized fixtures.
2) It is recommended to keep the torque level at 25~30 Ncm to tighten the direct-casting / metal-casing abutment with fixture.
Non-hex
4.5
4.5
12
1.0
Hex
4.5
4.5
12
1.0
Non-hex
4.5
4.5
12
1.0
-
7/26/2019 Catalog Implantium
37/128
SuperLine & Implantium Product Catalog 37
Unit: mm, Scale 1 : 1.5 / mm
Temporary Abutment Abutment screw is included.
G/H 1.0
10 8
4.5
RAB45THG andFXS4510
G/H 2.0
4.5
RAB4520PHL andFXS4510
Plastic Temporary Abutment
Diameter G/H Type Art. No.
4.5 1.0 Hex RAB 45 THG
4.5 1.0 Non-hex RAB 45 TNG
Ti-Temporary Abutment
Diameter G/H Type Art. No.
4.5 2.0 hex RAB 45 20 PHL 4.5 2.0 Non-hex RAB 45 20 PNL
5.5 2.0 hex RAB 55 20 PHL
5.5 2.0 Non-hex RAB 55 20 PNL
6.5 2.0 hex RAB 65 20 PHL
6.5 2.0 Non-hex RAB 65 20 PNL
Hex
4.5
10
1.0
4.54.5
8.0
2.0
Note: 1) If the Implantium fixture with size of 3.4 body is used, abutment height after assembly will become 0.5mm longer
than other sized fixtures.
2) It is recommended to keep the torque level at 25~30 Ncm to tighten the temporary abutment with fixture.
Non-hexhex
Non-hex
4.5
10
1.0
5.55.5
8.0
2.0
Non-hexhex
6.56.5
8.0
2.0
Non-hexhex
-
7/26/2019 Catalog Implantium
38/128
SuperLine & Implantium Product Catalog38
Prosthetic Procedure 3
Screw Abutment
Open Tray Technique Closed Tray Technique
Screw-Retained Restoration
Abutment Level Impression
Screw Abutment
4.5 / 5.5
Page39
Angled Screw Abutment
4.5 / 5.5
Page40
Analog
4.5/5.5
Page42
Impression Coping Transfer
Bridge / Single 4.5 / 5.5
Page41
Polishing Protector
4.5 / 5.5
Page42
Ti-Retaining Screw
Page42
Impression Technique and Restoration Selection
Impression Coping Pick-up
Bridge / Single 4.5 / 5.5
Page41
Metal Cylinder4.5 / 5.5
Page43
Gold Cylinder
4.5 / 5.5
Page43
Burn-out Cylinder
4.5 / 5.5
Page43
Bridge
(Non-hex)
Single
(Hex)
Temporary Restoration
Titanium Cylinder
4.5 / 5.5
Page43
Single
(Hex)
Bridge
(Non-hex)
Bridge
(Non-hex)
Single
(Hex)
Bridge
(Non-hex)
Single
(Hex)
-
7/26/2019 Catalog Implantium
39/128
SuperLine & Implantium Product Catalog 39
Screw Abutment
Diameter 4.5
Delivery Holder
G/H 3.5
5.5
SAB5535L andFXS4510
G/H Art. No.
1.0 SAB45 10 L
1.5 SAB45 15 L
2.5 SAB45 25 L
3.5 SAB45 35 L
4.5 SAB45 45 L
5.5 SAB45 55 L
1.0 1.5 2.5 3.5 4.5 5.5
1.5 2.5 3.5 4.5 5.5
Diameter 5.5
G/H Art. No.
1.5 SAB55 15 L
2.5 SAB55 25 L
3.5 SAB55 35 L
4.5 SAB55 45 L
5.5 SAB55 55 L
G/H
G/H
G/H
G/H
Note: 1) The Implantium fixture with size of 3.4 body is not recommended to use with the screw abutment. Should they be
used together, abutment height after assembly will become 0.5mm longer than the other sized fixtures.
2) It is recommended to keep the torque level at 25~30 Ncm to tighten the screw abutment with fixture.
Unit: mm, Scale 1 : 1.5 / mm
-
7/26/2019 Catalog Implantium
40/128
SuperLine & Implantium Product Catalog40
Unit: mm, Scale 1 : 1.5 / mm
Angled Screw Abutment
G/H 1.5
5.5 5.5
ASA55151518N andFXS4510
15
G/H 1.5
ASA55301518N andFXS4510
30
Note: 1) The Implantium fixture with size of 3.4 body is not recommended to use with the screw abutment. Should they be
used together, abutment height after assembly will become 0.5mm longer than the other sized fixtures.
2) It is recommended to keep the torque level at 25~30 Ncm to tighten the screw abutment with fixture.
ASASC 20 23
Angled Screw Abutment Screw
2.0
2.3
7.3
Delivery Holder
15
1.0
2.0
Non-hex
30
1.0
2.0
Non-hex
15
1.0
2.0
Hex
30
1.0
2.0
Hex
15
1.5
3.0
Non-hex
15
1.5
3.0
Hex
30
1.5
3.0
Non-hex
30
1.5
3.0
Hex
Angled Screw Abutment 4.5
G/H Type Art. No.
1.0 Hex ASA 45 1510 18 H
1.0 Non-hex ASA 45 1510 18 N
1.0 Hex ASA 45 3010 18 H
1.0 Non-hex ASA 45 3010 18 N
2.0 Hex ASA 45 1520 18 H
2.0 Non-hex ASA 45 1520 18 N
2.0 Hex ASA 45 3020 18 H
2.0 Non-hex ASA 45 3020 18 N
Angled Screw Abutment 5.5
G/H Type Art. No.
1.5 Hex ASA 55 1515 18 H
1.5 Non-hex ASA 55 1515 18 N
1.5 Hex ASA 55 3015 18 H
1.5 Non-hex ASA 55 3015 18 N
3.0 Hex ASA 55 1530 18 H
3.0 Non-hex ASA 55 1530 18 N
3.0 Hex ASA 55 3030 18 H
3.0 Non-hex ASA 55 3030 18 N
-
7/26/2019 Catalog Implantium
41/128
SuperLine & Implantium Product Catalog 41
Unit: mm, Scale 1 : 1.5 / mm
Screw Abutment Impression Components
Impression Coping Pick-up4.54.5
5.55.5
Impression Coping Transfer
4.5
4.5
5.55.5
Diameter Type Art. No.
4.5 Single Hex SPU 45SL
4.5 Bridge Non-hex SPU 45BL
5.5 Single Hex SPU 55SL
5.5 Bridge Non-hex SPU 55BL
Diameter Type Art. No.
4.5 Single Hex STF 45SL
4.5 Bridge Non-hex STF 45BL
5.5 Single Hex STF 55SL
5.5 Bridge Non-hex STF 55BL
Type Art. No.
Pick-up SPS 09
Transfer STS 09
Impression Coping Screw
15.0
9.0
Bridge (Non-hex)Single (Hex)
Bridge (Non-hex)Single (Hex)
Bridge (Non-hex)Single (Hex)
Bridge (Non-hex)Single (Hex)
-
7/26/2019 Catalog Implantium
42/128
SuperLine & Implantium Product Catalog42
Diameter Art. No. 4.5 SAN 45L
5.5 SAN 55L
5.5Analog
4.5
5.5
Polishing Protector
4.5
SRS 18 T
Ti-Retaining Screw
Diameter Art. No.
4.5 SPP 45L
5.5 SPP 55L
5.5
Comfort Cap
4.5 Diameter Art. No.
4.5 SCC 45 L
5.5 SCC 55 L
5.0 5.0
12.0 12.0
1.8
2.3
5.55.5
Ti-Cylinder4.54.5
Diameter Type Art. No.
4.5 Single Hex STC 45SG
4.5 Bridge Non-hex STC 45BG
5.5 Single Hex STC 55SG
5.5 Bridge Non-hex STC 55BGBridge (Non-hex)Single (Hex)
Bridge (Non-hex)Single (Hex)
8.7
3.3
8.7
3.3
8.7
3.3
8.7
3.3
1.8
1.8
2.3
2.3
Screw Abutment Impression Components
Unit: mm, Scale 1 : 1.5 / mm
-
7/26/2019 Catalog Implantium
43/128
SuperLine & Implantium Product Catalog 43
Unit: mm, Scale 1 : 1.5 / mm
Screw Abutment Impression Components
Gold Cylinder4.54.5
5.55.5
5.55.5
Burn-out Cylinder4.54.5
Diameter Type Art. No.
4.5 Single Hex SGC 45SL
4.5 Bridge Non-hex SGC 45BL
5.5 Single Hex SGC 55SL
5.5 Bridge Non-hex SGC 55BL
Diameter Type Art. No.
4.5 Single Hex SBC 45SL
4.5 Bridge Non-hex SBC 45BL
5.5 Single Hex SBC 55SL
5.5 Bridge Non-hex SBC 55BL
Bridge (Non-hex)Single (Hex)
Bridge (Non-hex)Single (Hex)
Bridge (Non-hex)Single (Hex)
Bridge (Non-hex)Single (Hex)
12.0 12.0
12.0 12.0
12.0 12.0
12.0 12.0
1.8
1.8
1.8
1.8
2.3
2.3
Metal Cylinder | Co-Cr4.54.5
5.55.5
Diameter Type Art. No.
4.5 Single Hex SGC 45CSL
4.5 Bridge Non-hex SGC 45CBL 5.5 Single Hex SGC 55CSL
5.5 Bridge Non-hex SGC 55CBLBridge (Non-hex)Single (Hex)
Bridge (Non-hex)Single (Hex)
12.0 12.0
12.0 12.0
1.8
1.8
2.3
2.3
2.3
2.3
-
7/26/2019 Catalog Implantium
44/128
SuperLine & Implantium Product Catalog44
Impression Technique and Restoration Type
Overdenture Procedure
Positioner / Mini Ball / Magnetic Attachment
Mini Ball Abutment3.5
Page47
Abutment Level Impression
Magnetic Attachment
for Overdenture
Implant Keeper4.5 / 5.5
Page48
Magnetic Assay
Page48
Implant Keeper4.5 / 5.5
Page49
Magnetic Assay
Page49
Mini Ball and Socket Attachment
for Overdenture
Positioner Attachment
for Overdenture
Mini Ball Impression Coping
Page47
Mini Ball Analog
Page47
Socket Spacer
Page47
Mini Denture Socket and O-ring
Page47
Positioner Abutment3.5
Page45
Positioner Impression Coping
Page45
Positioner Analog
Page45
Block Out Spacer
Page46
Positioner Metal Socket
/ Plastic Socket
Page46
Prosthetic Procedure 4
-
7/26/2019 Catalog Implantium
45/128
SuperLine & Implantium Product Catalog 45
Positioner
6.0 7.0
3.5 3.5
12.4
Unit: mm, Scale 1 : 1.5 / mm
FSMH andPAB3520 andFXS4510
G/H 2.00.4
2.3
5.2
Positioner Abutment
G/H Art. No.
1.0 PAB 35 10
2.0 PAB 35 20
3.0 PAB 35 30
4.0 PAB 35 40
5.0 PAB 35 50
6.0 PAB 35 60
7.0 PAB 35 70
Positioner Impression Coping
PIC
Positioner Analog
PAN
4.5
4.5
G/H 1.0 2.03.0 4.0 5.0
3.5 3.5 3.5 3.5 3.5
Note: 1) The Implantium fixture with size of 3.4 body is not recommended to use with the positioner abutment. Should they
be used together, abutment height after assembly will become 0.5mm longer than the other sized fixtures.
2) It is recommended to keep the torque level at 25~30 Ncm to tighten the ball abutment with fixture.
-
7/26/2019 Catalog Implantium
46/128
SuperLine & Implantium Product Catalog46
PositionerUnit: mm, Scale 1 : 1.5 / mm
Positioner Core Tool
XPCTArt. No.
Positioner Plastic Socket
Positioner Metal Socket
Positioner Socket Set
MSHP (Blue)
MSMP (Orange)
MSLP (Ivory)
MSOP (White)
FSMH
Retention Force 100gf 300gf 500gf 1,000gf
Art. No.
Tilting Type
10
Application
Art. No.
FSMHS(Tilting Type 10)Art. No.
2.3
5.2
Positioner Block Out Spacer
PBOSArt. No.0.5
6.5
MSHPN (Blue)
MSMPN (Orange)
MSLPN (Ivory)
MSOP (White)
Retention Force 100gf 300gf 500gf 1,000gfNon Tilting Type
5
FSMHSN(Non Tilting Type 5)
Metal Socket Plastic Socket Block Out spacer
-
7/26/2019 Catalog Implantium
47/128
SuperLine & Implantium Product Catalog 47
Mini Ball AttachmentUnit: mm, Scale 1 : 1.5 / mm
GICA
Mini Ball Impression Coping
BANL
Mini Ball Analog
BPF3 andBAB352018 andFXS4510
Note: 1) The Implantium fixture with size of 3.4 body is not recommended to use with the ball abutment. Should they be used
together, abutment height after assembly will become 0.5mm longer than the other sized fixtures.
2) It is recommended to keep the torque level at 25~30 Ncm to tighten the ball abutment with fixture.
Female Socket
G/H 2.0
2.9
4.05
Mini Ball Abutment
G/H Art. No.
0 BAB 35 0018
1.0 BAB 35 1018
2.0 BAB 35 2018
3.0 BAB 35 3018
4.0 BAB 35 4018 5.0 BAB 35 5018
4.0
1.8
3.5
3.0
1.8
3.5
2.0
1.8
3.5
1.0
1.8
3.5
1.8
3.3
5.0
1.8
3.5
Socket Spacer
5
4.0
(BFS3) (BNO1) (BFS2) (BNO2)
4.05 4.85
2.9 3.3Art. No.
BPF3(300~500gf)
BPF2 (500~700gf)
(300~500gf) (500~700gf)
Art. No.
GBIC3L
GBIC2L
-
7/26/2019 Catalog Implantium
48/128
SuperLine & Implantium Product Catalog48
Unit: mm, Scale 1 : 1.5 / mm
Magnetic Attachment [Dome Type]
Magnetic Assay
G/H 2.0
4.5
2.0
MGT4520D andMKP4520D andFXS4510
Retention Force 350gf
2.0 4.0
Application Diameter H Art. No.
MKP45D 4.5 2.0 MGT 45 20 D
MKP55D 5.5 2.0 MGT 55 20 D
Retention Force 700gf
2.5 2.0
2.0
4.5
5.5
2.5
0.5
6.0
G/H Art. No.
1.0 MKP 45 10 D
2.0 MKP 45 20 D
3.0 MKP 45 30 D
4.0 MKP 45 40 D
5.0 MKP 45 50 D
6.0 MKP 45 60 D
Implant Keeper Diameter 4.5
1.0 3.0 5.0
G/H
G/H Art. No.
1.0 MKP 55 10 D
2.0 MKP 55 20 D
3.0 MKP 55 30 D
4.0 MKP 55 40 D
5.0 MKP 55 50 D
6.0 MKP 55 60 D
Implant Keeper Diameter 5.5
G/H
2.0 4.0 6.01.0 3.0 5.0
G/H
G/H
Note: 1) The Implantium fixture with size of 3.4 body is not recommended to use with the magnetic abutment. Should they be
used together, abutment height after assembly will become 0.5mm longer than the other sized fixtures.
2) It is recommended to keep the torque level at 25~30 Ncm to tighten the magnetic abutment with fixture.
-
7/26/2019 Catalog Implantium
49/128
SuperLine & Implantium Product Catalog 49
Unit: mm, Scale 1 : 1.5 / mm
Magnetic Attachment [Flat Type]
G/H 2.0
4.5
1.5
MGT4515 andMKP4520 andFXS4510
Retention Force 400gf
Retention Force 450gf
Retention Force 700gf
Retention Force 750gf
1.5
2.0
1.5
2.0
4.5
4.5
5.5
5.5
Magnetic Assay
Application Diameter H Art. No.
MKP45 4.5 1.5 MGT 45 15
MKP45 4.5 2.0 MGT 45 20
MKP55 5.5 1.5 MGT 55 15
MKP55 5.5 2.0 MGT 55 20
2.0 4.0 6.0
G/H Art. No.
1.0 MKP 45 10
2.0 MKP 45 20
3.0 MKP 45 30
4.0 MKP 45 40
5.0 MKP 45 50
6.0 MKP 45 60
Implant Keeper Diameter 4.5
1.0 3.0 5.0
G/H
G/H Art. No.
1.0 MKP 55 10
2.0 MKP 55 20
3.0 MKP 55 30
4.0 MKP 55 40
5.0 MKP 55 50
6.0 MKP 55 60
Implant Keeper Diameter 5.5
G/H
2.0 4.0 6.01.0 3.0 5.0
G/H
G/H
Note: 1) The Implantium fixture with size of 3.4 body is not recommended to use with the magnetic abutment. Should they be
used together, abutment height after assembly will become 0.5mm longer than the other sized fixtures.
2) It is recommended to keep the torque level at 25~30 Ncm to tighten the magnetic abutment with fixture.
-
7/26/2019 Catalog Implantium
50/128
SuperLine & Implantium Product Catalog50
Surgical Kit [Full]
UXIF
Kit Contents
Countersink XCS 3629 SW
XCS 4029 SW
XCS 4529 SW
XCS 5029 SW
XCS 6029 SW
XCS 7029 SW
Hand-piece adapter
Ratchet adapter
Parallel pin x4
Path pin x2
Depth gauge
Hex driver
Ratchet
Drill extension
XPP 162220 T
XID 27 H
XID 32 H
XID 26 W
XID 32 W
XMFPA2
XHD 26T
XDE
XDGL
XRCA1
Final drill (Stopper) XFD 3435
XFD 3835
Final drill XFD 3429
XFD 3829
XFD 4329
XFD 4829
XFD 5831
First guide drill XLD 2229
XLD 2629Second guide drill
XLD 2235
XLD 2635
(Stopper)
(Stopper)
XFD 4335
XFD 4835
-
7/26/2019 Catalog Implantium
51/128
SuperLine & Implantium Product Catalog 51
Surgical Kit [Standard]
UXIFN
Kit Contents
Hand-piece adapter
Ratchet adapter
Countersink
Parallel pin
MF path pin x2
Hex driver
Ratchet
Drill extension
XCS 3629 SW
XCS 4029 SW
XCS 4529 SW
XCS 5029 SW
XPP 162220 T
XPP 162226 T
XID 30 H
XID 26 W
XMFPA2
XHD 26T
XDE
XRCA1
First guide drillXLD 2231
XLD 2631Second guide drill
XCS 6029 SW
XCS 7029 SW
Final drill XFD 3431
XFD 3831
XFD 4331
XFD 4831
XFD 5831
XHD 25 H
-
7/26/2019 Catalog Implantium
52/128
SuperLine & Implantium Product Catalog52
Surgical Kit [Short Implant]
Hand-piece adapter
Ratchet adapter
Parallel pin 2
MF path pin x2
Hex driver
Ratchet
XPP 162212
XID 27 H
XID 26 W
XMFPA2
XHD 26T
XRCA1
First guide drill XLD 2207
XLD 2607Second guide drill
Final drill XFC 3607
XFC 4007
XFC 4507
XFC 5007
XFC 6007
XFC 7007
XHD 25 H
XSIK
Kit Contents
-
7/26/2019 Catalog Implantium
53/128
SuperLine & Implantium Product Catalog 53
Drill Stopper Kit
XDS
Kit Contents
Guide drill stopper / First, Second
XLD 2235
XLD 2635
Final drill stopper/ 34, 38
XFD 34 35
XFD 38 35
Stopper-first guide drill, second guide drill
Stopper-final drill / 34, 38
XLDST 14 XLDST 12 XLDST 10 XLDST 08 XLDST 06
XFDST 14 XFDST 12 XFDST 10 XFDST 08 XFDST 06
Final drill stopper/ 43, 48
XFD 43 35
XFD 48 35
Stopper-final drill / 43, 48
XFDST 14L XFDST 12L XFDST 10L XFDST 08L XFDST 06L
-
7/26/2019 Catalog Implantium
54/128
SuperLine & Implantium Product Catalog54
Drill
Guide Drill
33
1.5
28
Diameter L Art. No.
1.5 20 XGD 15 20
1.5 28 XGD 15 28
1.5
20
33
First Guide Drill
Diameter L Art. No.
2.2 26 XLD 22 07
2.2 29 XLD 22 29
2.2 31 XLD 22 31
2.2 33 XLD 22 33
2.2 35 XLD 22 35
2.2 41 XLD 22 41
Second Guide Drill
Diameter L Art. No.
2.6 26 XLD 26 07
2.6 29 XLD 26 29
2.6 31 XLD 26 31
2.6 33 XLD 26 33
2.6 35 XLD 26 35
2.6 41 XLD 26 41
Note: Drill speed 1,000rpm, 30~45Ncm with irrigation.
First Drill
2.0
29
Diameter L Art. No.
2.0 29 XFD 20 29
2.0 33 XFD 20 33
2.352.6
1.72.2
1.72.2 Stopper
35
2.352.6 Stopper
29
1.72.2
29
2.352.6
26
1.72.2
26
2.352.6
31
1.72.2
31
2.352.6
8 10 12 14 16
2.0
33
Unit: mm, Scale 1 : 1 / mm
41
1.72.2
41
2.352.6
35
-
7/26/2019 Catalog Implantium
55/128
SuperLine & Implantium Product Catalog 55
DrillUnit: mm, Scale 1 : 1 / mm
Note: Drill speed 1,000rpm, 30~45Ncm with irrigation.
Diameter L Art. No.
2.9 29 XFD 3429
3.35 29 XFD 3829
3.85 29 XFD 4329
4.4 29 XFD 4829
5.4 29 XFD 5829SW
Final Drill | Length-29mm 12
29
Diameter L Art. No.
2.9 31 XFD 3431
3.35 31 XFD 3831
3.85 31 XFD 4331
4.4 31 XFD 4831
5.4 31 XFD 5831
Final Drill | Length-31mm2.9
3.35
3.85
14
4.4
5.4
31
2.9
3.35
3.85
4.4
5.4
Diameter L Art. No.
3.6 27 XFC 3607
4.0 27 XFC 4007
4.5 27 XFC 4507
5.0 27 XFC 5007
6.0 27 XFC 6007
7.0 27 XFC 7007
Final Drill | For Short Implant
7.0
27
3.6
Pilot Drill
1.93.0
30
Diameter L Art. No.
3.0 30 XPD 20 30
2.85
4.0 3.3
4.5 3.85
5.0 4.4
4.46.0
7.0 5.4
-
7/26/2019 Catalog Implantium
56/128
SuperLine & Implantium Product Catalog56
Drill
Note: Drill speed 1,000rpm, 30~45Ncm with irrigation.
Diameter L Art. No.
2.9 33 XFD 3433
3.35 33 XFD 3833
3.85 33 XFD 4333
4.4 33 XFD 4833
Final Drill | Length-33mm 16
33
2.9
3.35
3.85
4.4
Unit: mm, Scale 1 : 1 / mm
Diameter L Art. No.
2.9 35 XFD 3435
3.35 35 XFD 3835
3.85 35 XFD 4335
4.4 35 XFD 4835
Final Drill | Length-35mm | Stopper
35
Diameter L Art. No.
2.9 41 XFD 3441
3.35 41 XFD 3841
3.85 41 XFD 4341
4.4 41 XFD 4841
Final Drill | Length-41mm2.9
3.35
3.85
4.4
16
41
2.9
3.35
3.85
4.4
-
7/26/2019 Catalog Implantium
57/128
SuperLine & Implantium Product Catalog 57
Note: Drill speed 1,000rpm, 30~45Ncm with irrigation.
DrillUnit: mm, Scale 1 : 1 / mm
Diameter L Art. No.
2.85 35 XFH 3435
3.3 35 XFH 3835
3.85 35 XFH 4335
4.4 35 XFH 4835
Harvest Drill | Length-35mm | Stopper
35
2.85
3.3
3.85
4.4
2.0
3.0
3.6
4.0
4.5
5.0
29
Countersink
6.0
7.0
Round Bur
27
Diameter L Art. No.
2.0 33 XRB 2033
3.0 33 XRB 3033
Diameter L Art. No.
3.6 29 XCS 3629 SW
4.0 29 XCS 4029 SW
4.5 29 XCS 4529 SW
5.0 29 XCS 5029 SW
6.0 27 XCS 6029 SW
7.0 27 XCS 7029 SW
-
7/26/2019 Catalog Implantium
58/128
SuperLine & Implantium Product Catalog58
StopperUnit: mm, Scale 1 : 1 / mm
Drilling Depth L Art. No.
14 4.6 XLDST 14
12 6.6 XLDST 12
10 8.6 XLDST 10
08 10.6 XLDST 08
06 12.6 XLDST 06
04 14.6 XLDST 04
02 16.6 XLDST 02
XLDST14
Stopper | For first guide drill, second guide drill
XLDST12XLDST10
XLDST08
XLDST06
4.45 4.45 4.45 4.45 4.45
12.610.68.66.6
4.6
Drilling Depth L Art. No.
14 4.6 XFDST 14
12 6.6 XFDST 12
10 8.6 XFDST 10
08 10.6 XFDST 08
06 12.6 XFDST 06
04 14.6 XFDST 04
02 16.6 XFDST 02
Stopper | For final drill 3435, 3835
14.6 16.6
4.45 4.45
XFDST14XFDST12
XFDST10
XFDST08
XFDST06
5.14 5.14 5.14 5.14 5.14
12.610.68.66.6
4.6
14.6 16.6
5.14 5.14
XLDST04 XLDST02
XFDST04 XFDST02
Drilling Depth L Art. No.
14 4.6 XFDST 14L
12 6.6 XFDST 12L
10 8.6 XFDST 10L
08 10.6 XFDST 08L
06 12.6 XFDST 06L 04 14.6 XFDST 04L
02 16.6 XFDST 02L
Stopper | For final drill 4335, 4835
XFDST14L
XFDST12L
XFDST10L
XFDST08L
XFDST06L
6.14 6.14 6.14 6.14 6.14
12.610.68.66.6
4.6
14.6 16.6
6.14 6.14
XFDST04L XFDST02L
-
7/26/2019 Catalog Implantium
59/128
SuperLine & Implantium Product Catalog 59
Unit: mm, Scale 1 : 1 / mm
Instrument
Parallel Pin | For first guide drill, second guide drill
Diameter Art. No.
1.6 XPP 162212
1.6 XPP 162220T
1.6 XPP 162226T
Path Pin
20
26
1.6
15.5
1.6
1.6
L Art. No.
18.6 XMFPA218.6
Adapter | Hex 1.28mm
Type L Art. No.
27 XID 27H
Hand-piece 30 XID 30H
32 XID 32H
24 XID 24W
26 XID 26W
29 XID 29W
29 XID 32W
32
32
29
26
24
27
30
Ratchet
-
7/26/2019 Catalog Implantium
60/128
SuperLine & Implantium Product Catalog60
Instrument
Hex Driver | Hex 1.28mm
Slot Driver
Type L Art. No.
Hand-piece 25 XHD 25H
21 XHD 21W
25 XHD 25W
27 XHD 27W
26 XHD 26T
30 XHD 30TManual
Type Art. No.
SDA 17R
SDA 25R
25
30
26
25
17
Driver | Manual
Type Art. No.
Manual XHDHT
21
12
Drill Extension
XDE
26
Unit: mm, Scale 1 : 1 / mm
Ratchet
27
25
Ratchet
-
7/26/2019 Catalog Implantium
61/128
SuperLine & Implantium Product Catalog 61
InstrumentUnit: mm
Adapter | For screw & ball abutment | Scale 1 : 1 / mm
Ratchet
XRCA1
Torque Wrench | Scale 1 : 0.7 / mm
XNTW
Depth Gauge
XDGL
Note: One side of Depth Gauge measures the
osteotomy depth and the other side
measures the gingival height from the
top of the implant.
Type Art. No.
Hand-piece XMAA1
Ratchet XMA 21W
20
21
Tissue Punch | Scale 1 : 1 / mm
XTS40
Punching size : 4.0
Adapter | For mini ball abutment | Scale 1 : 1 / mm
IPST21W21
-
7/26/2019 Catalog Implantium
62/128
SuperLine & Implantium Product Catalog62
DASK [Dentium Advanced Sinus Kit]
DASK
Kit Contents
DASK drill XRT332035
XED331035D
XRT372035
XRT064025
XRT084025
XST083025
Stopper
XFDST 08 XFDST 06 XFDST 04 XFDST 02
Sinus elevation instrumentXSE1L
XSE2L
XSE3L
XSE4L
-
7/26/2019 Catalog Implantium
63/128
SuperLine & Implantium Product Catalog 63
Sinus Bur Kit / Sinus Kit
SDK
Kit Contents
DASK drill XRT332035
XED331035D
XRT372035
XRT064025
XRT084025
XST083025
StopperXFDST 08 XFDST 06 XFDST 04 XFDST 02
(XSE1L)
(XSE2L)
(XSE3L)
(XSE4L)
XSKL
Sinus Kit
-
7/26/2019 Catalog Implantium
64/128
SuperLine & Implantium Product Catalog64
DASK / Sinus Bur Kit / Sinus Kit
XRT332035
XED331035D
3.3
24681012
3.31.6
0
24681012 1 0
XRT372035 3.7
24681012 0
XRT064025
DASK Drill | Scale 1 : 1.2 / mm
XRT084025
XST083025
6.0
4.0
8.0
8.0
1.51.5
XFDST08
XFDST06
XFDST04
5.145.14 5.14 5.14
14.612.610.6
16.6
XFDST02
Drilling Depth L Art.No.
08 10.6 XFDST 08
06 12.6 XFDST 06
04 14.6 XFDST 04
02 16.6 XFDST 02
Stopper | For XRT332035, XRT372035, XED331035D | Scale 1 : 1 / mm
6.6
Sinus Elevation Instrument | Scale 1 : 0.45 / mm
XSE1L
XSE2L
XSE3L
XSE4L
Note: Drill speed 800 to 1,200rpm, 30~45Ncm with irrigation.
Crestal
Approach
DASK Drill #
DASK Drill #1
DASK Drill #2
DASK Drill #3
DASK Drill #4
DASK Drill #5
DASK Drill #6
Art.No.
XRT 332035
XRT 372035
XED 331035D
XRT 064025
XRT 084025
XST 083025
Type
Lateral
Approach
4.0
Unit: mm
-
7/26/2019 Catalog Implantium
65/128
SuperLine & Implantium Product Catalog 65
Osteotome Kit
A B
Osteotome Kit
Osteotome compresses the bone laterally, providing denser bony interface
rather than removing valuable bone from the surgical site.
Osteotome Kit
XOF 20 A1
XOF 34 A1
XOF 38 A1
XOF 43 A1
XOF 48 A1
XOF 20 B1
XOF 34 B1
XOF 38 B1
XOF 43 B1
XOF 48 B1
Osteotome | Final drill type | Scale 1 : 0.4 / mm
Unit: mm
Type Art.No. A B
XOF 20A1 1.7 2.8
XOF 34A1 2.3 2.8
XOF 38A1 2.7 3.2
XOF 43A1 2.8 3.8
XOF 48A1 3.0 4.3
XOF 20 B1 1.7 2.8 XOF 34 B1 2.3 2.8
XOF 38 B1 2.7 3.2
XOF 43 B1 2.8 3.8
XOF 48 B1 3.0 4.3
TypeB
TypeA
A B
XOFBK
TypeA
(Convex)
Type B
(Concave)
(Convex)
(Concave)
XOFK
XOFK (TypeA)
XOFBK (TypeB)
-
7/26/2019 Catalog Implantium
66/128
SuperLine & Implantium Product Catalog66
Trephine Kit
Trephine Bur
Excellent fine cutting
Strong engagement when attaching the trephine to cortical bone
Cut-outs facilitates ease of harvest retrieval
5 scale marks on the Trephine drill from 2mm to 10mm
Easy harvesting
Outer InnerDiameter Diameter
3.0 2.3 XTP 24 03
4.0 3.3 XTP 34 04
5.0 4.2 XTP 44 05
6.0 5.2 XTP 54 06
7.0 6.1 XTP 64 07
8.0 7.1 XTP 74 08
9.0 8.0 XTP 84 09
10.0 9.0 XTP 94 10
Art. No.
Trephine Bur | Scale 1 : 0.5 / mm 3.0
2.3
5.0
4.2
7.0
6.1
9.0
8.0
4.0
3.3
6.0
5.2
8.0
7.1
10.0
9.0
XIT
Trephine Kit
Outer
Inner
Outer
Inner
Outer
Inner
Outer
Inner
Outer
Inner
Outer
Inner
Outer
Inner
Outer
Inner
37
23
14108642
Unit: mm
-
7/26/2019 Catalog Implantium
67/128
SuperLine & Implantium Product Catalog 67
Prosthetic Kit
Hex Driver S/T | Scale 1 : 1 / mm
Torque Wrench | Scale 1 : 0.5 / mm
Slot Driver | Scale 1 : 1 / mm
Hex Driver T/W | Scale 1 : 1 / mm
Hex Driver L/T | Scale 1 : 1 / mm
Mount Adapter | Scale 1 : 1 / mm
T/W Adapter | Scale 1 : 1 / mm
XHD 15
SDA 25 R
XHD 25 W
XNTW
XHD 30T
XMAA1
XMA 21 W
XIP
Mini Ball Adapter | Scale 1 : 1 / mm
IPST 21 W
-
7/26/2019 Catalog Implantium
68/128
SuperLine & Implantium Product Catalog68
Unit: mm, Scale 1 : 1 / mm
Planning Kit
XPK
Kit Contents
Diameter 4.5 | Combi & Dual abutment
G/H Art.No.
1.5 PDAB 45 15
2.5 PDAB 45 25
3.5 PDAB 45 35
4.5 PDAB 45 45
5.5 PDAB 45 55
Diameter 5.5 | Combi & Dual abutment
G/H Art.No.1.5 PDAB 55 15
2.5 PDAB 55 25
3.5 PDAB 55 35
4.5 PDAB 55 45
5.5 PDAB 55 55
Angled 15 | Angled abutment
Diameter G/H Art.No.
4.5 2.0 PAAB 15 45 20
4.5 4.0 PAAB 15 45 40
5.5 2.0 PAAB 15 55 20
5.5 4.0 PAAB 15 55 40
Angled 25 | Angled abutment
Diameter G/H Art.No.
4.5 2.0 PAAB 25 45 20
4.5 4.0 PAAB 25 45 40
5.5 2.0 PAAB 25 55 20
5.5 4.0 PAAB 25 55 40
Diameter 6.5 | Combi & Dual abutment
G/H Art.No.1.5 PDAB 65 15
2.5 PDAB 65 25
3.5 PDAB 65 35
4.5 PDAB 65 45
5.5 PDAB 65 55
1.5
G/H
2.53.5 4.5
5.5
5.5
1.52.5
3.54.5
5.5
152.0
G/H
152.0
154.0
154.0 25
2.0
252.0
254.0
254.0
G/H G/H
1.52.5
3.54.5
G/H
-
7/26/2019 Catalog Implantium
69/128
SuperLine & Implantium Product Catalog 69
Prosthetic and Laboratory Instrument
Unit: mm
Reamer Guide for Screw Abutment | Scale 1 : 1 / mm
Diameter Art. No.
4.5 CRG 45 L
5.5 CRG 55 L
6.5 CRG 65 L
Reamer Guide for Combi/Dual Abutment | Scale 1 : 1 / mm
4.5
5.5
6.5
Bridge
Single
Hex Driver | Hex 1.28 mm | Scale 1 : 1 / mm
L Art. No.
13 XHD 13
15 XHD 15
21 XHD 21
28 XHD 28
Type Art. No.
Bridge SRG BL
Single SRG SL
13 15
2128
Hex 1.28
-
7/26/2019 Catalog Implantium
70/128
SuperLine & Implantium Product Catalog70
Prosthetic and Laboratory Instrument
CRH
Reamer Handle | Scale 1 : 0.5 / mm
XHW
Hand Wrench | Scale 1 : 1 / mm
CRM
Reamer (Combi/Dual Abutment) | Scale 1 : 1 / mm
SRM
Reamer (Screw Abutment) | Scale 1 : 1 / mm
-
7/26/2019 Catalog Implantium
71/128
SuperLine & Implantium Product Catalog 71
Help Kit
XIH
Unit: mm
Screw Remover | Scale 1 : 1 / mm
L Art. No
25 XRFS2S
33 XRFS2
Abutment Hex Remover | Scale 1 : 1 / mm
L Art. No
20 XRHR20
25 XRHR25
Screw Tap Repair | Scale 1 : 1 / mm
Type Art. No Tap XRSTR
11 Guide XRSG11
8 Guide XRSG8
Cover & Abutment Screw Remover| Scale 1 : 1 / mm
L Art. No
25 XRRHD
Fixture Remover | Scale 1 : 1 / mm
Type Art. No XRFRT
Remover XRFRTF
XRFRTO
Wrench XRFRW
25
33
25
11
8
2025
25 25 25
11 8
75
25
-
7/26/2019 Catalog Implantium
72/128
SuperLine & Implantium Product Catalog72
SURGICAL MANUAL
Surgical Drill Sequence I 73
Surgical Drill Sequence II 75
Drilling Depth Guide 77
Fixture Connection 79
Installation Procedure & Warnings 80Surgical Kit Maintenance 81
-
7/26/2019 Catalog Implantium
73/128
SuperLine & Implantium Product Catalog 73
Surgical Drill Sequence I
Drilling Sequence Guide (Final Drill)
3.6 4.0 4.5
7.04.5 5.0 6.0 7.0
Final Drill
Countersink
FirstGuide Drill
SecondGuide Drill
5.0
4.03.6
2.9 3.35 3.85 4.4
3.6 4.0 4.5 5.0 6.0 5.4 7.0
2.2 2.6
8 10 12 14 16
Platform: 3.6
Platform: 4.0
Platform: 4.5
Platform: 5.0
Platform: 6.0
Platform: 7.0
-
7/26/2019 Catalog Implantium
74/128
SuperLine & Implantium Product Catalog74
Determination of Fixture Top Level
Top level of fixture needs to be located 0.5mm below
the marginal crestal bone level to minimize bone loss
after implantation. However, only for the fixture of
7mm length, top level of fixture should be located
0.5mm above the marginal crestal bone level.
Depth Indication
Use the depth gauge after first drill / First guide drill to check depth of drilling.
Place the depth gauge against the wall of the osteotomy.
Depth
Gauge
During Fixture Insertion, 30 ~ 45Ncm Torque at 20rpm is Recommended
Countersink drill is used in cases with dense cortical bone.
If the bone density is D1~D3, it is recommended to countersink after final drill.
The actual diameter of the Countersink drill is 0.1mm larger than the fixture platform.
+0.5mm
7mm
10mm
CrestalBone-0.5mm
Length 7mm
-
7/26/2019 Catalog Implantium
75/128
SuperLine & Implantium Product Catalog 75
Surgical Drill Sequence II
Drilling Sequence Guide (Havrest Drill)
3.4 3.8 4.3
7.04.5 5.0 6.0 7.0
Harvest Drill
Countersink
FirstGuide Drill
SecondGuide Drill
4.8
4.03.6
2.85 3.3 3.85 4.4
3.6 4.0 4.5 5.0 6.0 5.4 7.0
2.2 2.6
8 10 12 14 16
Platform: 3.6
Platform: 4.0
Platform: 4.5
Platform: 5.0
Platform: 6.0
Platform: 7.0
: During the 4.3/4.8 fixture insertion into the bone density of D3~D4, the 3.4/3.8 harvest drilling process can be skipped.
Final Drill
-
7/26/2019 Catalog Implantium
76/128
SuperLine & Implantium Product Catalog76
Harvest Drill
Simultaneous and effective autogenous bone collection during the final drilling procedure using a
specially designed drill
Sharp pointed tip design of the drill prevents drill chatter and helps guide drill path.
Available drill stopper helps control drill depth for safe and efficient bone collection, especially in the buccal sideof ridge.
Recommended drill speed of less than 100rpm/50Ncm helps preserve the vital autogenous bone.
Excellent clinical results may be achieved when harvested autogenous bone is combined with OSTEON II .
First / Second guide drill
1000rpm / 30~45Nm with irrigation
Harvest drill
30~100rpm / 30~50Nm without irrigation
Bone Collection in the Buccal Side of Ridge: 50~200rpm / 30~50Ncm
Stopper
Locking with drill stopper for bone collection
4.0
-
7/26/2019 Catalog Implantium
77/128
SuperLine & Implantium Product Catalog 77
Drilling Depth Guide
D1~D2
D3~D4 Drilling depth of the countersink depends on the patient's bone quality.
If the bone density is D1~D2, it is recommended to drill up to the top line ( I ) oflaser mark on the countersink.
If the bone density is D3~D4, it is recommended to drill up to the bottom line ( II )of laser mark on the countersink.
Countersink Depth Guide
( I )
( II )
Final drill
3.6
10mm
Countersink
3.6
Second
guide drill
First
guide drill
Final drill
3.6
10mm
Final drill
4.0
Countersink
4.0
Second
guide drill
First
guide drill
Final drill
3.6
10mm
Final drill
4.0
Final drill
4.5
Countersink
4.5
Second
guide drill
First
guide drill
0.5mm
0.5mm
0.5mm
Platform: 3.6 / Body:3.4 (1000rpm / 30~45Ncm)
Platform: 4.0 / Body:3.8 (1000rpm / 30~45Ncm)
Platform: 4.5 / Body:4.3 (1000rpm / 30~45Ncm)
FX 3410
3.4
3.6
FXS 3610
3.6
3.7
FX 3810
3.8
4.0
FXS 4010
4.0
4.0
FX4310
4.3
4.5
FXS4510
4.5
4.5
-
7/26/2019 Catalog Implantium
78/128
SuperLine & Implantium Product Catalog78
Final drill
3.6
10mm
Final drill
4.0
Final drill
4.5
Final drill
5.0
Countersink
5.0
Second
guide drill
First
guide drill
Final drill
3.6
10mm
Final drill
4.0
Final drill
4.5
Final drill
5.0
Countersink
6.0
Second
guide drill
First
guide drill
Final drill
3.6
10mm
Final drill
4.0
Final drill
4.5
Final drill
5.0
Countersink
6.0
Final drill
7.0
Countersink
7.0
Second
guide drill
First
guide drill
FXS 6010
FXS 7010
5.0
6.0
5.8
7.0
0.5mm
0.5mm
0.5mm
Platform: 7.0 / Body:5.8 (1000rpm / 30~45Ncm)
Platform: 5.0 / Body:4.8 (1000rpm / 30~45Ncm)
Platform: 6.0 / Body:4.8 (1000rpm / 30~45Ncm)
FX 4810
4.8
5.0
FXS 5010
5.0
5.0
-
7/26/2019 Catalog Implantium
79/128
SuperLine & Implantium Product Catalog 79
Fixture Connection
Caution_When opening the fixture pack,
hold the fixture container upward
and engage the adapter into the
fixture.
By hand-piece20rpm / 35Ncm
By ratchet
Directions Using the Hand-piece / Ratchet Adapter
The Hand-piece Adapter/Ratchet Adapter must be connected firmly
together with the internal hex inside the fixture
Connection
Hand-piece
Adapter
Ratchet
Adapter
-
7/26/2019 Catalog Implantium
80/128
SuperLine & Implantium Product Catalog80
Installation Procedure & Warnings
Cover Screw
Warnings
Dental Implant surgery and restoration involve complex dental procedures. Appropriate and adequate training in proper
technique is strongly recommended prior to use.
Improper medical examination and/or treatment plan can result in implant failure and/or loss of supportive bone.
Improper initial stability and/or excessive occlusal forces during healing period may lead to osseointergration failure.
Excessive insertion torque may lead to mechanical failure or implant biologic failure due to bone compression and necrosis.
When forces or loads are greater than its design, implant or abutment fracture could happen. Therefore clinicians should
make careful decisions with regards to clinical treatment planning to minimize the risk of fracture. Appropriate implant
quantity, occlusal interface and a nightguard are essential. Potential excessive loading conditions may include the following:
01 Inadequate number of implants are placed.
02 Implant width and/or length are inappropriate for a treatment site.
03 Prosthesis which has excessive cantilever length due to inadequate biomechanical design
04 Continuous occlusal force are generated by incomplete connection between implant and abutment and/or abutment
screw loosening.
05 Direct Casting Abutment angles are greater than 30 from the vertical axis of the implant.
Direct Abutments are not for angulation.
06 Occlusal interferences causing excessive lateral forces
07 Patient parafunctions such as bruxism
08 Inadequate dental laboratory casting procedures
09 Improper prosthesis fit
10 Trauma from patient habits or accidents11 Excessive marginal bone loss caused by inadequate bone width and/or advanced periimplantitis
Healing Abutment
By Hex Driver Cover Screw (CS36)connection
Healing Abutment connectionBy Hex Driver Healing Abutment (HAB402020L)connection in thin gingiva
-
7/26/2019 Catalog Implantium
81/128
SuperLine & Implantium Product Catalog 81
Surgical Kit Maintenance
Sterilization and Instrument Care Procedures
Please follow legal regulations, as well as hygienic guidelines to prevent contamination and infection through prevention.
Please remember that you are responsible for the maintenance and sterilization of your medical / dental products /device.It is important to use and follow proper cleaning, disinfection and sterilization procedures.
It is also important to follow the manufactures recommendation on the usage of drills.Please keep a log as to how many times the drills are used.
Drills are used per implant placed not per patient. Bone density determines the life of the drills.
Replace white and red o-rings on adapters and hex drivers, if worn and dried out.
Drills should be considered for replacement around 20 uses based on bone density.
01 All instruments immediately after use must be pre-soaked for a few minutes in a germicidal bath to loosen andprevent debris from attaching to instruments. Do not soak over-night.
02 Scrub with a soft brush to remove any debris.
03 For internal irrigation drills use a reamer or small gauge needle to cleanout drill internally.
04 If using an ultrasonic cleaner, wrap drills in a 2 2 to prevent rubbing against each other.
05 Rinse thoroughly under warm water.
06 Clean all instrument trays with a germicidal cleaner prior to replacing instruments in kit.
07 Dry completely and place back into kit.
08 Always check for damage or corrosion after rinsing and drying.
09 Seal the tray in a sterilization pouch.
10 Sterilize using a steam autoclave at 121C / 250for 30 minutes or refer to manufacture's recommendations.
11 Store in a dry area at room temperature.
Maintenance Period for Surgical Drills
All surgical drills shall be replaced after approximately 40 uses based on bone
density.
Countersink DrillDepending on bone density,
the rpm could be adjusted.
Final Drill
1000rpm, 30~45Ncm with Irrigation
Guide Drill (First / Second)
1000rpm, 30~45Ncm with Irrigation
-
7/26/2019 Catalog Implantium
82/128
SuperLine & Implantium Product Catalog82
PROSTHESIS MANUAL
ProstheticIntroduction
Understanding the Implant and Prosthesis 83
Types of Abutment 84
Dual Abutment 85
Combi Abutment 86
Dual Milling / Anged / Temporay /Direct-Casting / Metal-Casting Abutment 87
Screw Abutment / Angled Screw Abutment 89
Points to Consider in Abutment Selection 90
Minimum Height Requirement forSuperLine Prosthetic Abutment 91
Prosthetic Procedure 1 92
Abutment Level- Dual Abutment 93
Abutment Level- Combi Abutment 96
Prosthetic Procedure 2 98
Fixture Level [Pick-up Type]- Dual Abutment 99
Fixture Level [Transfer Type]- Dual Abutment 102
Fixture Level [Transfer Type]- Dual Milling Abutment 105
Fixture Level [Pick-up Type]- Angled Abutment 107Fixture Level- Direct-Casting Abutment 109
Fixture Level- Metal-Casting Abutment 110
Fixture Level [Pick-up Type]- Temporary Abutment 111
Prosthetic Procedure 3 112
Abutment Level [Transfer Type]- Screw Abutment 113
Cementation Repair Method (SCRP) 116
Prosthetic Procedure 4 118Positioner 119
Ball Attachment 121
Magnetic Attachment 122
-
7/26/2019 Catalog Implantium
83/128
SuperLine & Implantium Product Catalog 83
Understanding the Implant and Prosthesis
Biological Connection
The tapered conical hex connection between implantand abutment interface provides hermetic sealing.
The biological connection distributes the load to thefixture evenly. Therefore it may minimize bone loss.
All implant diameters share the same internal connection.One abutment screw fits all abutments and fixtures.
Types of Abutment (Abutments are available in various diameters & gingival heights)
Dual Abutment
Combi Abutment
Dual Abutment
Dual Milling Abutment
Angled Abutment (15/25)
Direct-Casting Abutment
Metal-Casting Abutment
Temporary Abutment (Plastic & Titanium)
Screw AbutmentAngled Screw Abutment (15/ 30)
Positioner Attachment
Ball Attachment
Magnetic Attachment
Abutment level
Fixture level
For denture use
Screw retained (Abutment level)
-
7/26/2019 Catalog Implantium
84/128
SuperLine & Implantium Product Catalog84
Angled Abutment
Abutment Level
Dual Milling AbutmentCombi Abutment Dual Abutment
One-Piece Two-Pieces
Temporary Abutment
Direct-Casting Abutment
Types of Abutment
Straight abutments are Dual and Combi Abutment.
Depending on the insertion angle and position of the fixture, the Angled or Direct / Metal - Casting Abutment may be used.
The Screw Abutment can be used when prosthesis retrieval is anticipated.
Cylinder
Hex Non-hex
Screw Abutment
Hex Non-hex
Non-hex
Hex
Non-hex Hex
Hex Non-hex
PlasticTitanium
Non-hexHex Non-hex
Selection Guideline
Ideal emergence profile for each tooth
(15) (25)
Hex Non-hex Non-hex
Metal-Casting Abutment
HexHex
(15) (30)
Fixture Level
-
7/26/2019 Catalog Implantium
85/128
SuperLine & Implantium Product Catalog 85
Hex Non-hex
Positioning Jig Unnecessary Required
Radiograph Required Unnecessary
Dual Abutment
Dual Abutment (Hex / Non-hex)
Diameter G/H Vertical Angle
4.5 1.0mm, 1.5mm, 2.5mm, 3.5mm, 4.5mm, 5.5mm 5
5.5 1.0mm, 1.5mm, 2.5mm, 3.5mm, 4.5mm, 5.5mm 6
6.5 1.0mm, 1.5mm, 2.5mm, 3.5mm, 4.5mm, 5.5mm 7
Hex / Non-hex
Non-hexHex
Dual Abutment
It is possible to take an impression at both fixture level and abutment level.
(A Dual Abutment may be interchanged with a Combi Abutment)
For abutment level impressions, the same prosthetic procedures apply to both Dual and Combi Abutments.
For fixture level impressions, the abutment selection takes place on the master model.
For fixture level impressions, a precise positioning jig for abutment may be required.
Either hex or non-hex abutments may be used, according to operator's preference.
* If a cement retained restoration requires retrieval, cutting a hole in the occlusal surface would allow access to the screw to permit removal.
A
-
7/26/2019 Catalog Implantium
86/128
SuperLine & Implantium Product Catalog86
Combi Abutment
Combi Abutment Line Up
Diameter G/H Vertical Angle
4.5 1.0mm, 1.5mm, 2.5mm, 3.5mm, 4.5mm, 5.5mm 5
5.5 1.0mm, 1.5mm, 2.5mm, 3.5mm, 4.5mm, 5.5mm 6
6.5 1.0mm, 1.5mm, 2.5mm, 3.5mm, 4.5mm, 5.5mm 7
The Combi Abutment is used when the implant position is optimal.
If the abutment selection is made in the mouth, gauge the thickness of mucosa with the depth gauge to measure the
gingival height thus allowing the appropriate abutment height.
The Impression is taken with the snap cap.
When using the Combi Abutment, it remains in the mouth after the impression is taken.
(Do not remove or change its position)
Tighten abutment screw to 25 - 35 Ncm. (retighten again before seating final prosthesis)
* If the Combi Abutment is too long it can be adjusted 1.5mm to the bottom of the laser mark on the vertical stack of
the abutment. The Combi Abutment has a short analog for the 1.5mm adjustment.
* A resin jig can be made to record the reduction if reduced more the 1.5mm.
Prosthetic part
Transmucosal part
Fixture connection partMargin of prosthetic element:
Sub-gingival, equilibrium,
supra-gingival
A
-
7/26/2019 Catalog Implantium
87/128
SuperLine & Implantium Product Catalog 87
Dual Milling / Angled / Temporary /
Direct-Casting Abutment / Metal-Casting Abutment
Dual Milling Abutment
Impression is taken at fixture level.
When using a non-hex abutment a precise seating jig should be used.
Either hex or non-hex abutments may be used, according to operators preference.
* If a cement retained restoration requires retrieval, cutting a hole in the occlusal surface would allow access to thescrew for removal.
Direct-Casting Abutment
Excellent for either single or bridgework
Used as an esthetic custom made abutment.
Used when angulation is not ideal and a standard abutment cannot be used.
Used when there is inadequate inter-arch distance and a standard abutment cannot be used. A fixture level impression is taken, and the soft tissue contours can be supported.
Angled Abutment
The Angled Abutment is recommended when the restoration path ofinsertion is unfavorable in either anterior or posterior sites.
Retention force can be increased through milling process.
Hex Non-hex Hex Non-hex
Hex Non-hexNon-hex Non-hexHex
(15)
Hex Non-hex
(25)
Hex Hex Non-hex
Dual Milling Abutment
Temporary Abutment Metal-Casting Abutment
Angled Abutment
Direct-Casting Abutment
-
7/26/2019 Catalog Implantium
88/128
SuperLine & Implantium Product Catalog88
X
Dual Milling / Angled / Temporary /
Direct-Casting Abutment / Metal-Casting Abutment
Temporary Abutment
Temporary Abutments are available with titanium or plastic.
The titanium abutment comes in both hex and non-hex with a gingival height of 1.0mm.
The plastic abutment comes in diameters (4.5, 5.5, 6.5) with a gingival height of 2.0mm.
Abutment Diameter G/H Angle
Dual Milling
Hex Non-hex
Hex Non-hex
Hex Non-hex
Fixture Level Abutment (Hex / Non-hex)
Hex Non-hex
Metal-Casting Abutment
Equivalent results for a fraction of the price
Our highly affordable metal alloy replaces expensive gold to alleviate financial burden to all.
Angled
Direct-Casting
Abutment
4.0
4.5
5.5
6.5
7.5
1.0mm
1.5mm
1.5 / 2.5mm
1.5 / 2.5 / 3.5mm
2.5 / 3.5mm
4.5
5.5
1.5mm
2.5mm
3.5mm
1.5mm
2.5mm
3.5mm
15 / 25
15 / 25
4.5 1.0mm X
Hex Non-hex
Metal-Casting
Abutment4.5 1.0mm X
Hex Non-hex
Ti-Temporary 4.5 1.0mm X
Hex Non-hex
Plastic
Temporary
4.5
5.5
6.5
2.0mm X
-
7/26/2019 Catalog Implantium
89/128
SuperLine & Implantium Product Catalog 89
Screw Abutment
If prosthesis repair is anticipated, use of a Screw Abutment retained prosthesis enables easy
retrieval.
Useful for connecting multiple units or when there is a preference for a screw retained prosthesis.
Useful when respective long axes of implants differ. Each side tapers by 30 and this permits up to 60
divergence between two abutments.
Useful when the prognosis of an adjacent restoration is not ideal thus permitting easy retrieval and modification