Catalog HY13-2600-700/US Variable Displacement Piston ...€¦ · 25 Variable Displacement Piston...

Parker Hannifin CorporationHydraulic Pump/Motor DivisionGreeneville, Tennessee, USA

Catalog HY13-2600-700/US

23

Variable Displacement Piston PumpsSeries P2

SAE B 2-BOLT MTG FLANGE - DIAGONAL MOUNT

SAE C 4-BOLT MOUNTING FLANGE

ISO 6149 STRAIGHTTHD O-RING PORT

M12 X 1.5 THD

ISO 6149 STRAIGHTTHD. O-RING PORT

M22 X 1.5 THD.

"B"SIDE - METRIC

PORT OPTION DRAIN PORTINLET GAUGE PORTOUTLET GAGE PORT

SIGNAL PORT

"A"SIDE - UNC

SAE-10 STRAIGHT THD.O-RING PORT7/8-14 UN THD

SAE-4 STRAIGHT THD.O-RING PORT

7/16-20 UN THD

114.5(4.51)

114.5(4.51)

PORT

GAUGEPORT

GAUGEOUTLET

INLET

12.5(.492)

127.00/126.95(5.000/4.998) 50

(1.97)

235(9.25)

223(8.78)

15(.59)

DRAIN PORTSENSITIVITY4.1 CC/TURN

30 CC MIN

MAX VOL ADJ

9.5(.37)

101.6/101.55(4.000/3.998)

81(3.19)

70(2.76)

15(.59)

50°2 PLACES

146.1(5.75)

B.C.

o/

Dimensional Data

Pump Installation - P2-060 Mounting Flange (side port)

CCW Pump willhave inlet andoutlet gauge portsreversed.


Variable Displacement Piston PumpsCatalog HY13-2600-700/US

24

Series P2Dimensional Data

Pump Installation - P2-060 Side Port

BOTTOM VIEW

THREAD SIZE SEE CHART

RIPPLE CHAMBER PLUGDO NOT REMOVE

DIFF PRESS ADJ10.7BAR (155PSI)PER TURNSENSITIVITY

OPTIONALDRAINPORTSEE CHART

LIFTING HOOK(3/8-16 THREAD)

SIGNAL PORT SEE CHART

"WEEP HOLE"WET FLANGEBOTH SIDESSEAL OPTIOND & T

126(4.96)

OUTLET PORT1" 4 BOLT FLANGEHIGH PRESSURESERIES (CODE 62)

SIDE VIEW

INLET PORT2" 4 BOLT FLANGESTANDARD PRESSURESERIES (CODE 61)

THREAD SIZE SEE CHART

ROTATIONARROW

TOP VIEW

REAR VIEW

235(9.25)

PRESS COMP ADJ52BAR (758PSI)PER TURNSENSITIVITY

RIPPLECHAMBERPLUGDO NOTREMOVE

85(3.45)

73(2.87)

163(6.41)

114(4.49)

184(7.24)

90(3.54)

109(4.29)

71(2.80)

81(3.19)

81(3.19)

78(3.07)

252(9.92)

66(2.59)

29(1.14)

264(10.39)

224(8.82)

114(4.49)

141(5.55)

144(5.67)

124(4.88)

96(3.78)

76(3.00)

52(2.05)

51(2.00)

76(3.30)

73(2.87)

49(1.93)

45(1.77)

66(2.60)

92(3.62)

73(2.87)

73(2.87)

CLOCKWISE ROTATION SHOWN

PORTINLET &

DRAIN PORT

INLET GAUGE PORT

OUTLET GAUGE PORT

SIGNAL PORT

"A"

UNC1/2-13 UNC

SAE-12 STRAIGHT THD.

O-RING PORT

7/8-14 UN

SAE-4 STRAIGHT THD.

O-RING PORT

7/16-20 UN THD

"B"

METRICM12 X 1.75

ISO 6149 STRAIGHT

THD. O-RING PORT

M22 X 1.5

ISO 6149 STRAIGHT

THD. O-RING PORT

M12 X 1.5 THD.

OUTLETTHREADSOPTION

NOTES:1. Pump shown is a clockwise rotationP2-060 series axial piston pump withload sense and maximum pressurecontrol.

2. Rotation arrow in rear coverindicates proper shaft rotation.

3. Weight of pump shown: 36.5 kg.



25

Variable Displacement Piston PumpsSeries P2Dimensional Data

Pump Installation - P2-060 Mounting Flange (rear port)

PORTGAUGE

ARROWROTATION

INLET

PAGE 9SEE TABLE

SAE B 2-BOLT MTG FLANGE - DIAGONAL MOUNT

SAE C 4-BOLT MOUNTING FLANGE

SENSITIVITY30 CC MIN

4.1 CC/TURNMAX VOL ADJ

DRAIN PORT

7/16-20 UN THDO-RING PORT

SAE-4 STRAIGHT THD.

7/8-14 UN THDO-RING PORT


SIDE - UNC"G"

INLET GAUGE PORTDRAIN PORTPORT OPTION

SIDE - METRIC"H" ISO 6149 STRAIGHT

THD. O-RING PORTM22 X 1.5 THD.


M12 X 1.5 THD

OUTLET GAUGE PORTSIGNAL PORT

211(8.31)

15(.59)

81(3.19)

101.6(4.0)

9.5(.37)

114.5(4.51)

114.5(4.51)

50°2 PLACES

15(.59)

70(2.76)

127(5.0)

12.5(.492)

146.1(5.75)B.C.




26


Pump Installation - P2-060 Rear Port

THREAD SIZESEE TABLE

INLET PORT2" 4 BOLT FLGSTD PRESS SERIES(CODE 61)

OUTLET PORT1" 4 BOLT FLGHIGH PRESS SERIES(CODE 62)

"WEEP HOLE"BOTH SIDESSEAL OPTIOND & V

OPTIONALDRAINPORT

BOTTOM VIEW

THREAD SIZESEE TABLE

SIDE VIEW

REAR VIEW

(3/8-16 UN-2B THD)LIFTING HOOK

SIGNAL PORT

OUTLETGAUGEPORT

TOP VIEWCLOCKWISE ROTATION SHOWN

PORTINLET &

DRAIN PORT

INLET GAUGE PORT

OUTLET GAUGE PORT

SIGNAL PORT

"G"

UNC1/2-13 UNC


O-RING PORT

7/8-14 UN

SAE-4 STRAIGHT THD.

O-RING PORT

7/16-20 UN THD

"H"

METRICM12 X 1.75

ISO 6149 STRAIGHT

THD. O-RING PORT

M22 x 1.5

ISO 6149 STRAIGHT

THD. O-RING PORT

M12 X 1.5 THD.

OUTLETTHREADSOPTION

50(1.97)

104(4.09)

144(5.67)

124(4.88)

96(3.78)

76(3.00)

92(3.62)

45(1.77)

66(2.60)

49(1.93)

141(5.55)

79.3(3.12)

79.3(3.12)

39(1.53)

121(4.76)

71(2.80)

109(4.29)

163(6.41)

90(3.54)

211(2.31)

252(9.92)

104(4.09)

78(3.07)

29(1.14)

114(4.89)

241(9.49)

184(7.24)

66(2.60)

101(3.98)

NOTES:1. Pump shown is a clockwise rotationP2-060 series axial piston pump withload sense and maximum pressurecontrol.

2. Counterclockwise rotation pump willhave inlet and outlet ports reversed.



27


Pump Installation - P2-060 Shaft Options and Torque Control

"C1" SHAFT OPTIONSAE "C" SPLINE14 TOOTH12/24 PITCH30° INVOLUTE SPLINEMAX INPUT TORQUE:641NM (5677 IN/LBS)

55.6(2.19)

"B2" SHAFT OPTIONSAE "B-B" SPLINE15 TOOTH16/32 PITCH30° INVOLUTE SPLINEMAX INPUT TORQUE:337NM (2987 IN/LBS)

46(1.81)

"B1" SHAFT OPTIONSAE "B" SPLINE13 TOOTH16/32 PITCH30° INVOLUTE SPLINEMAX INPUT TORQUE:209NM (1852 IN/LBS)

41.2(1.62)

"C5" SHAFT OPTIONSAE "C" KEYEDMAX INPUT TORQUE641 NM (5677 IN/LBS)

55.6(2.19)

35.2(1.38)

31.75(1.25)

7.94 (.3125)SQUARE KEY

TORQUE CONTROLOPTIONS "TA","TB","TC & "TD"200 NM (1770 IN LBS) PER TURNAPPROXIMATE SENSITIVITY

33.7(1.33)

161(6.34)



28


Pump Installation - P2-060 Thru-Shaft Option

THRU-SHAFTOPTION A B C D E

FUNC

FMETRIC

GUNC

GMETRIC

PUMPWEIGHT

A1 264(10.4)

82.626/82.575(3.252/3.250)

106.38(4.19)

N/A

SAE-A SPLINE9 TOOTH

16/32 PITCH3/8-16 UNC-2B THD M10 X 1.5 THD

N/A N/A

80 lbs

B1 297(11.7)

101.676/101.625(4.002/4.000)

146.05(5.75)

SAE-B SPLINE13 TOOTH

16/32 PITCH1/2-13 UNC-2B THD M12 X 1.75 THD 86 lbs

B2 297(11.7)

146.05(5.75)

SAE-BB SPLINE15 TOOTH

16/32 PITCH1/2-13 UNC-2B THD M12 X 1.75 THD 86 lbs

C1 C3 299(11.8)

127.076/127.025(5.002/5.000)

180.98(7.125)

SAE-C SPLINE14 TOOTH

12/24 PITCH5/8-11 UNC-2B THD M16 X 2 THD 1/2-13 UNC-2B THD M12 X 1.75 THD 89 lbs

A1 CONFIGURATION B1 & B2 CONFIGURATION

C1 & C3 CONFIGURATION

E

F

E

F

E

F

G

E

B

B

B

CD

D

C

A

264(10.39)

MAX THRU-DRIVE TORQUE IS 336NM (2980 IN/LBS)

C3 ONLY

101.676/101.625(4.002/4.000)



29


SAE C 2 BOLTMOUNTING HOLES2 PLACES.692" DIAMETER

SAE C 4 BOLTMOUNTING HOLES.565" DIAMETER

DRAIN PORT

INLET GAUGEPORT

MAX VOL ADJ4.9 CC/TURNSENSITIVITY52 CC MIN

FLANGE MOUNTING DIMENSIONS - REAR PORTED PUMP

SAE C 2 BOLTMOUNTING HOLES2 PLACES.692" DIAMETER

SAE C 4 BOLTMOUNTING HOLES.565" DIAMETER

DRAIN PORT

MAX VOL ADJ4.9 CC/TURNSENSITIVITY

INLETGAUGEPORT

OUTLETGAUGEPORT

SIDE PORTED PUMPFLANGE MOUNTING DIMENSIONS

PORT OPTION DRAIN PORT INLET GAUGE PORTOUTLET GAUGE PORT

"A"SIDE - UNC


1-1/16-12 UN THD.


7/16-20 UN THD.

"B"SIDE - METRIC


M27 X 2 THD.


M12 X 1.5 THD.

248.5(9.78)

146(5.75)

123(4.84)

88.2(3.47)

60.5(2.38)

270.5(10.65)

194(7.64)

278.5(10.96)

76(3.00)

81(3.19)

127.00 (5.00)126.95 (4.99)

146(5.75)

62(2.44)

62(2.44)

258.5(10.17)

264.5(10.41)

194(7.63)

278.5(10.96)

76(3.00)

32.4(1.28)

127.00 (5.00)126.95 (4.99)

30o

(4.51)114.5

114.5(4.51)

Dimensional Data

Pump Installation - P2-075 Mounting Flange




30



112(4.41)

DIMENSIONS WILL BE REVERSEDON A CCW PUMP

ROTATION ARROW

DIFF PRESS ADJ131PSI (9.1BAR)PER TURNSENSITIVITY

PRESS COMP ADJ921PSI (63.5BAR)PER TURNSENSITIVITY

ALTERNATEDRAIN PORT

SIDE VIEW

OUTLET PORT1" HIGH PRESSSERIES4 BOLT FLG(CODE62)

SIGNAL PORT

INLET PORT2" STD PRESS SERIES4 BOLT FLG (CODE61)

TOP VIEW

BOTTOM VIEW

REAR VIEW

"A"7/16-14 UNC

M12X1.75"B"

"B"M12X1.75

"A"1/2-13 UNC

81(3.19)

81(3.19)

292.5(11.52)

55(2.17)

52(2.05)

51(2.00)

51(2.00)

145(5.71)

123(4.84)

254(10.00)

126.5(4.98)

95(3.19)

88.2(3.47)

60.5(2.38)

90.5(3.56)

81(3.19)

77.5(3.05)

99(.390)

130(5.12)

154(6.06)

84.5(3.33)

102.5(4.04)

67.5(2.66)

201(7.91)

265(10.43)

Weep holefor D & T

RIPPLE CHAMBER PLUGDO NOT REMOVE




31


INLETGAUGEPORT

OUTLET PORT1" HIGH PRESS

SERIES4 BOLT FLG(CODE 62)

INLET PORT2" STD PRESS SERIES4 BOLT FLG(CODE 61)

OPTIONALDRAIN PORT

DIFF PRESS ADJ9.1BAR (132PSI)

PER TURNSENSITIVITY 4MM HEX

PRESS COMP ADJ63.5BAR (921PSI)/

TURN SENSITIVITY4MM HEX

SIGNAL PORT

84.5(3.33)

SIDE VIEW

TOP VIEW

BOTTOM VIEW

REAR VIEW


M12 X 1.5 THD.M12 X 1.75M12 X 1.75

"H"SIDE METRIC

SAE-4 STRAIGHT THDO-RING PORT

7/16-20 UN THD7/16-14 UNC1/2-13 UNC

"G"SIDE UNC

SIGNAL & GAUGEOUTLETINLETPORT OPTION

270.5(10.65)

248.5(9.78)

81.8(3.22)

51(2.00)

145(5.71)

52(2.04)

39(1.54)

55(2.17)

102.5(4.04)

67.5(2.66)

201(7.91)

84.5(3.33)

112(4.41)

81.8(3.22)

51(2.00)

NOTES1. The pump shown is a clockwise rotation rear-ported P2-075series axial piston pump with load sense and maximum pressurecontrol.

2. Counter clockwise rotation pumps will have inlet and outletports in opposite locations.

Dimensional Data

Pump Installation - P2-075 Rear Port



32



SHAFT OPTION "C3"SAE "C" SPLINE NO UNDERCUT14 TOOTH 12/24 PITCH30° INVOLUTEMAX INPUT TORQUE:769NM (6812 IN/LBS)

SHAFT OPTION "C1"SAE "C" SPLINE14 TOOTH 12/24 PITCH30° INVOLUTEMAX INPUT TORQUE:641NM (5677 IN/LBS)

SHAFT OPTION "C2"SAE "CC" SPLINE17 TOOTH 12/24 PITCH30° INVOLUTEMAX INPUT TORQUE:1217NM(10777 IN/LBS)

SHAFT OPTION "C5"SAE "C" KEYEDMAX INPUT TORQUE:641NM (5677 IN/LBS)

SHAFT OPTION "C6"SAE "CC" KEYEDMAX INPUT TORQUE:1217NM (10777 IN/LBS)

55.6(2.19)

62.0(2.44)

SIDE VIEW

69(2.72)

55.6(2.19)

31.9(1.25)

35.2(1.385)

7.94 (.3125)SQUARE KEY

38.1(1.50)

42.3(1.66)

62.0(2.44) 9.525 (.375)

SQUARE KEY



33



82.626/82.575 (3.252/3.250)+ 0 to + .002

SAE-A SPLINE9 TOOTH

16/32 PITCH

101.676/101.625 (4.002/4.001)

127.075/127.025 (5.003/5.001) 181 114.5

181 114.5 1/2-13 UNC-2B

F

F

* ALL SHAFT COUPLINGS 30 DEGREE INVOLUTE SPLINE

FLAT ROOT SIDE FIT

Ø

F

E

F

Ø

THRU-SHAFTOPTION A B C D E F

"A" & "G" UNCF

"B" & "H" METRIC

A1 292.5 106.3 3/8-16 UNC-2B M10 X 1.5

B1 325.5 146.1SAE-B SPLINE

13 TOOTH16/32 PITCH

1/2-13 UNC-2B M12 X 1.75

B2 325.5 146.1SAE-BB SPLINE

15 TOOTH16/32 PITCH

1/2-13 UNC-2B M12 X 1.75

C1 327.5SAE-C SPLINE

14 TOOTH12/24 PITCH

5/8-11 UNC-2B M16 X 2

C3 327.5SAE-C SPLINE

14 TOOTH12/24 PITCH

M12 X 1.75

F

A1 CONFIGURATION

B1 & B2 CONFIGURATION


Ø

Ø

127.075/127.025 (5.003/5.001)+ .001 to +.003

106.38(4.19)

C

C D

D REF

Ø

101.676/101.625 (4.002/4.001)+ .001 to +.002

88(3.46)

MAX THRU-DRIVE TORQUE IS 336 NM (2973 INLBS)

Pumps will be assembled with flange adapters as shown.Options B1, B2, C1 and C3 can be rotated 90°.

B

B

B

A



34



PORT OPTION DRAIN PORTINLET GAUGE PORT


"A"SIDE - UNC


1-1/16-12 UN-2B


7/16-20 UN THD

"B"SIDE - METRIC


M27 X 2 THD


M12 X 1.5 THD.

SHAFT OPTION "C1"SAE "C" SPLINE14 TOOTH 12/24 PITCH30° INVOLUTEMAX INPUT TORQUE:641NM (5677 IN/LBS)

SHAFT OPTION "D1"SAE "D" SPLINE13 TOOTH 8/16 PITCH30° INVOLUTEMAX INPUT TORQUE:1701NM (15057 IN/LBS)

SHAFT OPTION "C5"SAE "C" KEYEDMAX INPUT TORQUE:641NM (5677 IN/LBS)

SHAFT OPTION "C6"SAE "CC" KEYEDMAX INPUT TORQUE:1701NM (15057 IN/LBS)

55.6(2.19)

75.7(2.98)

62(2.44) 9.525(.375)

SQUARE KEY

38.1(1.5)

30°

SAE C 2-BOLTMOUNTING HOLES2 PLACES

SAE C 4-BOLTMOUNTING FLG

114.5(4.51)

194(7.64)

114.5(4.5)

146(5.75)

55.6(2.19) 7.945(.3125)

SQUARE KEY

31.75(1.25)

DRAIN PORT

MAX VOL ADJ5.65CC/TURN SENSITIVITYMIN DISP 70CC/REV

OUTLET GAUGEPORT

INLET GAUGEPORT

103(4.06) 97

(3.82)

102(4.02)

277(10.91)

95(3.74)




35





36


Pump Installation - P2-105 Torque Control



37



*** MAXIMUM THRU DRIVE TORQUE CAPABILITY ISLIMITED TO 587NM (5195 IN/LBS)

323(12.72)

AA1 CONFIGURATION

E

F

B

C

E

E


B

C

E

G

F


B

D

D

C

82.626/82.575 (3.252/3.250)

SAE-A SPLINE9 TOOTH

16/32 PITCH

101.676/101.625 (4.002/4.001)

127.075/127.025 (5.003/5.001) 181 114.5

181 114.5 1/2-13 UNC-2B

* ALL SHAFT COUPLINGS 30 DEGREE INVOLUTE SPLINE FLAT ROOT SIDE FIT

Ø

Ø

OPTION A B C D E FUNC

FMETRIC

A1 323•(12.72) 106.3 1/2-13 UNC-2B M10 X 1.5

B1 356•(14.02) 146.1

SAE-B SPLINE13 TOOTH

16/32 PITCH1/2-13 UNC-2B M12 X 1.75 N/A N/A

B2 356•(14.02) 146.1

SAE-BB SPLINE15 TOOTH

16/32 PITCH1/2-13 UNC-2B M12 X 1.75

C1 358•(14.09)


12/24 PITCH1/2-13 UNC-2B M12 X 1.75

C3 358•(14.09)


12/24 PITCHM12 X 1.75 5/8-11 UNC-2B

GUNC

GMETRIC

5/8-11 UNC-2B M16 X 2

M16 X 2

Ø

Ø

127.075/127.025 (5.003/5.001)

Ø

101.676/101.625 (4.002/4.001)



38



OUTLET GAUGE

INLET GAUGE

DRAIN PORT

MAX VOLUME ADJ7.8 CC/TURNSENSITIVIY100 CC MINIMUM

SAE C 2 BOLT MOUNTING FLANGE

SAE D 4 BOLT MOUNTING FLANGE


7/16-20 UN THD


1-1/16-12 UN THD

"A"SIDE - UNC

INLET GAUGE PORTOUTLET GAUGE PORT

SIGNAL PORT

DRAIN PORTPORT OPTION

"B"SIDE - METRIC


M27 X 1.75 THD.


M12 X 1.5 THD

161.65(6.36)

161.65(6.36)

152.40/152.35(6.000/5.998)

12.7(.50)

20(.79)

289(11.38)

90(3.54)

82(3.23)

299(11.77)

92(3.62)

12.7(.50)

112(4.41)

15(.59)

180.98(7.125)

127.00/126.95(5.000/4.998)

O

O

Note: Counter clockwise rotation pump will have inlet and outlet gauge ports reversed.



39



OPTIONAL DRAIN PORT

ROTATION ARROW

RIPPLE CHAMBERPLUGDO NOT REMOVE

OUTLET PORT1-1/4 INCH HIGH PRESSSERIES 4 BOLT FLANGE(CODE 62)

SIGNAL PORT

LIFTING HOOK3/8-16 UN-2B

PRESSURE COMPADJUSTMENT63.5 BAR(921PSI)/•TURN SENSITIVITY

DIFF PRESSUREADJUSTMENT9.1 BAR(132PSI)/TURN SENSITIVITY

OPTIONAL DIFF PRESSTEST PORT (-4 SAE)

"WEEP HOLE"BOTH SIDESSEAL OPTIOND & T

54(2.13)

INLET PORT2-1/2 INCH STD PRESSSERIES 4 BOLT FLANGE(CODE 61)

THREAD - SEE TABLE

THREAD:SEE

TABLE

TOP VIEW

SIDE VIEW

BOTTOM VIEW

REAR VIEW

PORTOPTION

INLETPORT

OUTLETPORT

DRAIN PORTINLET GAUGE PORT


"A"SIDE - UNC 1/2-13 UNC 1/2-13 UNC


1-1/16-12 UN-2B


7/16-20 UN THD

"B"SIDE - METRICM12 X 1.75 M12 X 1.75


M27 X 2 THD


M12 X 1.5 THD.

130(5.12)

299(11.77)

70(2.76)

220(8.66)

102(4.02)

110(4.33)

64(2.52)

98(3.86)

121(4.76)

302/292.5(11.89/11.52)

142(84.33)

82(3.23)

127(5.00)

207(8.15)

58(2.28)

87(3.43)

114(4.49)

181(7.13)

164(6.46)

57(2.24)

59(2.32)

100(3.94)

100(3.94)

107(4.21)

118(4.65)

109(4.29)

131(5.16)

162(6.38)

186(7.32)

284(11.18)

118(4.65)

107(4.21)

330(13.00)

NOTES:1. PUMP SHOWN IS A CLOCKWISE ROTATION P2-145 SERIES AXIAL PISTON PUMP WITH LOADSENSE AND MAXIMUM PRESSURE CONTROL2. COUNTERCLOCKWISE ROTATION PUMP WILLHAVE RIPPLE CHAMBER REVERSED.3. MASS OF PUMP SHOWN: 81.8 Kg



40



(15057 in-lbs) 1701 NmMAX INPUT TORQUE:SAE D KEYED"D3" SHAFT OPTION

SHAFT OPTIONDISPLACEMENT WITH THIS235 BAR (3408PSI) MAX AT FULLPUMP MUST BE DE-RATED TO**NOTE

(5677 in-lbs) 641 NmMAX INPUT TORQUE:30 INVOLUTE SPLINE12/24 PITCH14 TOOTHSAE C"C1" SHAFT OPTION

(15057 in-lbs) 1701 NmMAX INPUT TORQUE:30 INVOLUTE SPLINE8/16 PITCH13 TOOTH

SAE D"D1" SHAFT OPTION

(7.95)202

200 NM (1770 IN LBS)/TURNAPPROXIMATE SENSITIVIY:

OPTIONS "TA","TB","TC" & "TD"TORQUE CONTROL

(2.22) 56.5

(2.98) 75.6

(1.94) 49.4

(1.75) 44.4

(2.98) 75.6

SQUARE KEY11.11 (.4375)



41



A

(12.97)329.5

152.475/152.425 (6.003/6.001)

(5.003/5.001) 127.075/127.025

127.075/127.025 (5.003/5.001)

(5.003/5.001) 127.075/127.025

127.075/127.025 (5.003/5.001)

101.676/101.625 (4.002/4.001)

(4.002/4.001) 101.676/101.625

82.626/82.575 (3.252/3.250)

E

LIMITED TO 1217 Nm (10777 in-lbs)MAXIMUM THRU-DRIVE TORQUE CAPABILITY IS***NOTE***

194M16 X 2 THD3/4-10 UNC-2B THDN/AN/A8/16 PITCH13 TOOTHSAE-D SPLINE

161.65N/AØ375D3

185M12 X 1.75 THD1/2-13 UNC-2B THDM16 X 2 THD5/8-11 UNC-2B THD12/24 PITCH17 TOOTHSAE-CC SPLINE

114.50180.98Ø364.5C4

185M12 X 1.75 THD1/2-13 UNC-2B THDM16 X 2 THD5/8-11 UNC-2B THD12/24 PITCH14 TOOTHSAE-C SPLINE

114.50180.98Ø364.5C3

185M12 X 1.75 THD1/2-13 UNC-2B THDM16 X 2 THD5/8-11 UNC-2B THD12/24 PITCH17 TOOTHSAE-CC SPLINE

180.98Ø364.5C2

185M12 X 1.75 THD1/2-13 UNC-2B THDM16 X 2 THD5/8-11 UNC-2B THD12/24 PITCH14 TOOTHSAE-C SPLINE

180.98Ø364.5C1

182M12 X 1.75 THD1/2-13 UNC-2B THD16/32 PITCH15 TOOTHSAE-BB SPLINE

146.05Ø362.5B2

182M12 X 1.75 THD1/2-13 UNC-2B THD16/32 PITCH13 TOOTHSAE-B SPLINE

146.05Ø362.5B1

176

N/AN/A

M10 X 1.5 THD3/8-16 UNC-2B THD16/32 PITCH9 TOOTHSAE-A SPLINE

N/A

106.38Ø329.5A1

WEIGHT (LBS)PUMP

METRICG

UNCG

METRICF

UNCFEDCBAOPTION

THRU-SHAFT



42


D3 CONFIGURATION

E

G

C1, C2, C3 & C4 CONFIGURATION

E

E

E


A1 CONFIGURATION

B

D

D

C

F

G

D

D

B

C

F

B

FB

C




43

Variable Displacement Piston PumpsSeries P2Operating and Installation

Recommended Operating and Installation Instructions

Speed Minimum 600 RPMMaximum 2800 RPM P2060Maximum 2500 RPM P2075Maximum 2300 RPM P2105Maximum 2200 RPM P2145

Pressure Limited by the pressure compensator control in the pump. Maximum allowable setting 320 Bar (4640 PSI)

Flow P2060 168.0 l/min (44.4 GPM) @ 2800 RPMP2075 187.5 l/min (49.5 GPM) @ 2500 RPMP2105 241.5 l/min (63.8 GPM) @ 2300 RPMP2145 319.0 l/min (84.3 GPM) @ 2200 RPM

Inlet Not to exceed p min 0,8 bar (abs) and p max 10 bar (abs) (vacuum) atConditions maximum rate speed on petroleum based fluids. Inlet pressure not to exceed 10 Bar (145 PSI).

Filtration For maximum pump and system component life, fluid contamination should be limited to 20/18/14 accordingto ISO4406. Due to the nature of variable volume pumps, pump inlet conditions, types of fluids and dutycycles must be considered before specifying suction filtration. Contact Parker Representative for assistance.

Temperature Normal working fluid temperature in tank 0°C - 70°C (+32°F to +158°F)Range Maximum operating case drain temperature 90°C (+194°F)

Cold start temperature -40°C (-40°F)

Fluid Premium hydraulic fluid with a normal operating viscosity range between 15 - 40 cSt. Maximum viscosity is1000 cSt for short periods. Minimum viscosity is 10 cSt for short periods. Oil should have maximum anti-wear properties, rust, and oxidation inhibitors.

Case Drain In full compensation @ 320 Bar (4640 PSI) the normal case drain flow is 8 l/min (2.1 GPM) P206010 l/min (2.6 GPM) P207513 l/min (3.4 GPM) P210515 l/min (4.0 GPM) P2145

Maximum allowable back pressure is .5 Bar (7.75 PSI) continuousMaximum allowable back pressure is 2 Bar (29.0 PSI) intermittent



45

Variable Displacement Piston PumpsSeries P2Notes

Catalog HY13-2600-700/US Variable Displacement Piston ...€¦ · 25 Variable Displacement Piston...

Documents

Transcript of Catalog HY13-2600-700/US Variable Displacement Piston ...€¦ · 25 Variable Displacement Piston...