catalog for pdf - chbullco.com5.5 8055M 8055MD 8055UM 8055MMG 6 806M 806MD 806UM 806MMG 7 807M 807MD...
Transcript of catalog for pdf - chbullco.com5.5 8055M 8055MD 8055UM 8055MMG 6 806M 806MD 806UM 806MMG 7 807M 807MD...
-
PRODUCT
CATALOG
-
IMPACT SOCKETS . . . . . . . . . . 2
AIR TOOLS . . . . . . . . . . . . . . 44
HAND TOOLS . . . . . . . . . . . . 76
SPECIALTY TOOLS. . . . . . . . . 92
LIFTING EQUIPMENT . . . . . . 102
SHOP EQUIPMENT. . . . . . . . 120SUNEX TOOLS 1
TABLE OF CONTENTS
-
IMPACT SOCKETSGIVING YOU THE POWER
TO MAKE AN IMPACT ON STUBBORN FASTENERS
No doubt, the strongest impact socket line
around. Sunex Tools® impact sockets tackle the
toughest jobs with a chrome molybdenum alloy
steel grip that won’t let go. With solid durability
that keeps them driving through job after job, we've
got sizes and styles enough to fulfi ll any need.
-
4 SUNEX TOOLS
1/4" DRIVE IMPACT SOCKETS
1/4" DRIVE STANDARD10 PIECE SAEIMPACT SOCKET SET> CR-MO alloy steel for long life> Fully guaranteed> Heavy molded storage tray
1810
INCLUDES:
3/16" 7/32" 1/4"
9/32" 5/16" 11/32"
3/8" 7/16" 1/2"
9/16"
1/4" DRIVE STANDARD9 PIECE METRICIMPACT SOCKET SET> CR-MO alloy steel for long life> Fully guaranteed> Heavy molded storage tray
1809
INCLUDES:
5.5mm 6mm 7mm
8mm 9mm 10mm
11mm 12mm 13mm
1/4" DRIVE DEEP10 PIECE SAEIMPACT SOCKET SET> CR-MO alloy steel for long life> Fully guaranteed> Heavy molded storage tray
1811
INCLUDES:
3/16" 7/32" 1/4"
9/32" 5/16" 11/32"
3/8" 7/16" 1/2"
9/16"
1/4" DRIVE DEEP9 PIECE METRICIMPACT SOCKET SET> CR-MO alloy steel for long life> Fully guaranteed> Heavy molded storage tray
1812
INCLUDES:
5.5mm 6mm 7mm
8mm 9mm 10mm
11mm 12mm 13mm
-
SUNEX TOOLS 5Note: For full warranty information, see page 144.
1/4" DRIVE IMPACT SOCKETS
Radius corner design causes the socket to grab the sturdy wall, or fl at, of the fastener instead of grabbing the corners, resulting in less corner wear on the fastener.
1/4" DRIVE UNIVERSAL 6 PIECE SAE IMPACT SOCKET SET > CR-MO alloy steel for long life > Fully guaranteed > Heavy molded storage tray
1813
INCLUDES:
1/4" 5/16" 3/8"
7/16" 1/2" 9/16"
1/4" DRIVE UNIVERSAL 12 PIECE METRIC IMPACT SOCKET SET > CR-MO alloy steel for long life > Fully guaranteed > Heavy molded storage tray
1814
INCLUDES:
5mm 5.5mm 6mm
7mm 8mm 9mm
10mm 11mm 12mm
13mm 14mm 15mm
1/4" DRIVE MASTER MAGNETIC 23 PIECE SAE & METRIC IMPACT SOCKET SET > Magnetized to hold fasteners securely during installation and removal > CR-MO alloy steel for long life > Fully guaranteed > Heavy duty blow mold case
1818
INCLUDES:
9 SAE Sockets:
3/16" 7/32" 1/4"
9/32" 5/16" 11/32"
3/8" 7/16" 1/2"
12 Metric Sockets:
5mm 5.5mm 6mm
7mm 8mm 9mm
10mm 11mm 12mm
13mm 14mm 15mm
Universal Joint
2" Extension
-
6 SUNEX TOOLS
1/4" DRIVE IMPACT SOCKETS
All sockets are also available individually
1/4" DRIVE MASTER74 PIECE SAE & METRICIMPACT SOCKET SET> CR-MO alloy steel for long life> Fully guaranteed> Heavy duty blow mold case> Sockets included: Standard SAE: 3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 7/16", 1/2" & 9/16" Standard Metric: 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13, 14 & 15mm Deep SAE: 3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8" 7/16", 1/2" & 9/16" Deep Metric: 5.5, 6, 7, 8, 9, 10, 11, 12, 13, 14 & 15mm Universal SAE: 1/4", 5/16", 3/8", 7/16", 1/2" & 9/16" Universal Metric: 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13, 14 & 15mm Internal Star: T10, T15, T20, T25, T27 & T30 Extension Bar: 2", 4" & 6" Universal Joint 3/8" Adapter (Adapters not under warranty)
1874
INCLUDES:
10 Standard SAE Sockets
14 Standard Metric Sockets
10 Deep SAE Sockets
11 Deep Metric Sockets
6 Universal SAE Sockets
12 Universal Metric Sockets
6 Internal Star Sockets
3 Extension Bars
Universal Joint
1/4"(F) x 3/8"(M) Adapter
1/4", 3/8" & 1/2" DRIVE12 PIECE INTERNAL STARIMPACT SOCKET SET> CR-MO alloy steel for long life> Fully guaranteed> Heavy duty blow mold case
1820S
INCLUDES:
1/4" Drive:
T10 T15 T20
T25 T27 T30
3/8" Drive:
T40 T45 T47
T50 T55
1/2" Drive:
T60
1/4" DRIVE INDIVIDUALINTERNAL STAR SOCKETS Size Model #
T10 1820S1
T15 1820S2
T20 1820S3
T25 1820S4
T27 1820S5
T30 1820S6
-
SUNEX TOOLS 7Note: For full warranty information, see page 144.
1/4" DRIVE IMPACT SOCKETS
1/4" DRIVE INDIVIDUAL SAE SOCKETS
Size Standard Deep Universal Magnetic
Inches Model# Model# Model# Model#
3/16 806 806D 806MG
7/32 807 807D 807MG
1/4 808 808D 808U 808MG
9/32 809 809D 809MG
5/16 810 810D 810U 810MG
11/32 811 811D 811MG
3/8 812 812D 812U 812MG
7/16 814 814D 814U 814MG
1/2 816 816D 816U 816MG
9/16 818 818D 818U
1/4" DRIVE INDIVIDUAL METRIC SOCKETSSize Standard Deep Universal Magnetic
mm Model# Model# Model# Model#
4 804M
4.5 8045M
5 805M 805UM 805MMG
5.5 8055M 8055MD 8055UM 8055MMG
6 806M 806MD 806UM 806MMG
7 807M 807MD 807UM 807MMG
8 808M 808MD 808UM 808MMG
9 809M 809MD 809UM 809MMG
10 810M 810MD 810UM 810MMG
11 811M 811MD 811UM 811MMG
12 812M 812MD 812UM 812MMG
13 813M 813MD 813UM 813MMG
14 814M 814MD 814UM 814MMG
15 815M 815MD 815UM 815MMG
1/4" DRIVE INDIVIDUAL ADAPTERSItem Model #
1/4"(F) x 3/8"(M) 1801
3/8"(F) x 1/4"(M) 1805
1/4" DRIVE INDIVIDUAL EXTENSIONSItem Model #
2" Extension 1802
4" Extension 1804
6" Extension 1806
1/4" DRIVE INDIVIDUAL UNIVERSAL JOINTItem Model #
Universal Joint 1800
Standard Deep
Universal Magnetic
Standard Deep
Universal Magnetic
-
8 SUNEX TOOLS
3/8" DRIVE IMPACT SOCKETS
3325
INCLUDES:
12 Standard Sockets:
5/16" 3/8" 7/16" 1/2"
9/16" 5/8" 11/16" 3/4"
13/16" 7/8" 15/16" 1"
12 Deep Sockets:
5/16" 3/8" 7/16" 1/2"
9/16" 5/8" 11/16" 3/4"
13/16" 7/8" 15/16" 1"
Universal Joint
3/8" DRIVE MASTER25 PIECE SAEIMPACT SOCKET SET> CR-MO alloy steel for long life> Fully guaranteed> Heavy duty blow mold case
3650
INCLUDES:
5/16" 3/8" 7/16" 1/2"
9/16" 5/8" 11/16" 3/4"
3/8" DRIVE STANDARD8 PIECE SAEIMPACT SOCKET SET> CR-MO alloy steel for long life> Fully guaranteed> Heavy molded storage tray
3360
INCLUDES:
5/16" 3/8" 7/16" 1/2"
9/16" 5/8" 11/16" 3/4"
13/16" 7/8" 15/16" 1"
3/8" DRIVE STANDARD12 PIECE SAEIMPACT SOCKET SET> CR-MO alloy steel for long life> Fully guaranteed> Heavy molded storage tray
-
SUNEX TOOLS 9Note: For full warranty information, see page 144.
3/8" DRIVE IMPACT SOCKETS
3329
INCLUDES:
14 Standard Sockets:
8mm 9mm 10mm 11mm
12mm 13mm 14mm 15mm
16mm 17mm 18mm 19mm
21mm 22mm
14 Deep Sockets:
8mm 9mm 10mm 11mm
12mm 13mm 14mm 15mm
16mm 17mm 18mm 19mm
21mm 22mm
Universal Joint
3/8" DRIVE MASTER 29 PIECE METRIC IMPACT SOCKET SET > CR-MO alloy steel for long life > Fully guaranteed > Heavy duty blow mold case
3651
INCLUDES:
9mm 10mm 11mm 13mm
14mm 15mm 17mm 18mm
19mm
3/8" DRIVE STANDARD 8 PIECE METRIC IMPACT SOCKET SET > CR-MO alloy steel for long life > Fully guaranteed > Heavy molded storage tray
3358
INCLUDES:
7mm 8mm 9mm 10mm
11mm 12mm 13mm 14mm
15mm 16mm 17mm 18mm
19mm
3/8" DRIVE STANDARD 13 PIECE METRIC IMPACT SOCKET SET > CR-MO alloy steel for long life > Fully guaranteed > Heavy molded storage tray
-
10 SUNEX TOOLS
3/8" DRIVE IMPACT SOCKETS
3/8" DRIVE MASTER DEEP28 PIECE SAE & METRICIMPACT SOCKET SET> CR-MO alloy steel for long life> Fully guaranteed (excluding adapter)> Heavy duty blow mold case (replacement part # RS97201)
3652
INCLUDES:
5/16" 3/8" 7/16" 1/2"
9/16" 5/8" 11/16" 3/4"
3/8" DRIVE DEEP8 PIECE SAEIMPACT SOCKET SET> CR-MO alloy steel for long life> Fully guaranteed> Heavy molded storage tray
3361
INCLUDES:
5/16" 3/8" 7/16" 1/2"
9/16" 5/8" 11/16" 3/4"
13/16" 7/8" 15/16" 1"
3/8" DRIVE DEEP12 PIECE SAEIMPACT SOCKET SET> CR-MO alloy steel for long life> Fully guaranteed> Heavy molded storage tray
3360DD
INCLUDES:
12 Deep SAE Sockets:
5/16" 3/8" 7/16" 1/2"
9/16" 5/8" 11/16" 3/4"
13/16" 7/8" 15/16" 1"
14 Deep Metric Sockets:
8mm 9mm 10mm 11mm
12mm 13mm 14mm 15mm
16mm 17mm 18mm 19mm
21mm 22mm
1/2"(F) x 3/8"(M) Adapter
3" Extension
-
SUNEX TOOLS 11Note: For full warranty information, see page 144.
3/8" DRIVE IMPACT SOCKETS
3664
SIZES INCLUDED:
9 SAE Sockets:
1/4" 9/32" 5/16"
3/8" 7/16" 1/2"
9/16" 5/8" 11/16"
3/4"
13 Metric Sockets:
7mm 8mm 9mm
10mm 11mm 12mm
13mm 14mm 15mm
16mm 17mm 18mm
19mm
Universal Joint
3" Extension
3653
INCLUDES:
9mm 10mm 11mm 13mm
14mm 15mm 17mm 19mm
3/8" DRIVE DEEP 8 PIECE METRIC IMPACT SOCKET SET > CR-MO alloy steel for long life > Fully guaranteed > Heavy molded storage tray
3359
INCLUDES:
7mm 8mm 9mm 10mm
11mm 12mm 13mm 14mm
15mm 16mm 17mm 18mm
19mm
3/8" DRIVE DEEP 13 PIECE METRIC IMPACT SOCKET SET > CR-MO alloy steel for long life > Fully guaranteed > Heavy molded storage tray
3/8" DRIVE MASTER MAGNETIC 24 PIECE SAE & METRIC IMPACT SOCKET SET > Magnetized to hold fasteners securely during installation and removal > CR-MO alloy steel for long life > Fully guaranteed > Heavy duty blow mold case
-
12 SUNEX TOOLS
3/8" DRIVE IMPACT SOCKETS
3682
INCLUDES:
7mm 8mm 9mm 10mm
11mm 12mm 13mm 14mm
15mm 16mm 17mm 18mm
19mm
3/8" DRIVE 12 POINT DEEP13 PIECE METRICIMPACT SOCKET SET> CR-MO alloy steel for long life> Fully guaranteed> Heavy duty blow case> Ideal for working in tight areas> Reduces wear on fasteners
3654
INCLUDES:
3/8" 7/16" 1/2" 9/16"
5/8" 11/16" 3/4"
3/8" DRIVE UNIVERSAL7 PIECE SAEIMPACT SOCKET SET> CR-MO alloy steel for long life> Fully guaranteed> Heavy molded storage tray
3655
INCLUDES:
10mm 13mm 14mm 15mm
16mm 17mm 18mm
3/8" DRIVE UNIVERSAL7 PIECE METRICIMPACT SOCKET SET> CR-MO alloy steel for long life> Fully guaranteed> Heavy molded storage tray
3680
INCLUDES:
5/16" 3/8" 7/16" 1/2"
9/16" 5/8" 11/16" 3/4"
13/16" 7/8" 15/16" 1"
3/8" DRIVE 12 POINT DEEP12 PIECE SAEIMPACT SOCKET SET> CR-MO alloy steel for long life> Fully guaranteed> Heavy duty blow mold case> Ideal for working in tight areas> Reduces wear on fasteners
-
SUNEX TOOLS 13Note: For full warranty information, see page 144.
3/8" DRIVE IMPACT SOCKETS
3657
INCLUDES:
10mm 11mm 12mm 13mm
14mm 15mm 16mm 17mm
18mm 19mm
3/8" DRIVE UNIVERSAL 10 PIECE METRIC IMPACT SOCKET SET > CR-MO alloy steel for long life > Fully guaranteed > Heavy molded storage tray
3670S
INCLUDES:
T20 T25 T27 T30
T40 T45 T47 T50
T55
3/8" DRIVE INTERNAL STAR 9 PIECE IMPACT SOCKET SET > CR-MO alloy steel for long life > Fully guaranteed > Heavy duty blow mold case
3656
INCLUDES:
3/8" 7/16" 1/2" 9/16"
5/8" 11/16" 3/4"
3/8" DRIVE DEEP UNIVERSAL 7 PIECE SAE IMPACT SOCKET SET > CR-MO alloy steel for long life > Fully guaranteed > Heavy molded storage tray
3660
INCLUDES:
10mm 11mm 12mm 13mm
14mm 15mm 16mm 17mm
18mm 19mm
3/8" DRIVE DEEP UNIVERSAL 10 PIECE METRIC IMPACT SOCKET SET > CR-MO alloy steel for long life > Fully guaranteed > Heavy molded storage tray
-
14 SUNEX TOOLS
3/8" DRIVE IMPACT SOCKETS
3670SE
INCLUDES:
E5 E6 E7 E8
E10 E11 E12 E14
E16
3/8" DRIVE EXTERNAL STAR9 PIECEIMPACT SOCKET SET> CR-MO alloy steel for long life> Fully guaranteed> Heavy duty blow mold case
3647
INCLUDES:
3/16" 7/32" 1/4" 5/16"
3/8" 7/16" 1/2"
3/8" DRIVE HEX7 PIECE SAEIMPACT SOCKET SET> CR-MO alloy steel for long life> Fully guaranteed> Heavy duty blow mold case
3648
INCLUDES:
4mm 5mm 6mm 7mm
8mm 10mm 12mm
3/8" DRIVE HEX7 PIECE METRICIMPACT SOCKET SET> CR-MO alloy steel for long life> Fully guaranteed> Heavy duty blow mold case
3658
INCLUDES:
3/16" 7/32" 1/4" 5/16"
3/8" 7/16" 1/2"
3/8" DRIVE UNIVERSAL HEX7 PIECE SAEIMPACT SOCKET SET> CR-MO alloy steel for long life> Fully guaranteed> Heavy duty blow mold case
-
SUNEX TOOLS 15Note: For full warranty information, see page 144.
3/8" DRIVE IMPACT SOCKETS
All sockets are also available individually
3659
INCLUDES:
4mm 5mm 6mm 7mm
8mm 10mm 12mm
3/8" DRIVE UNIVERSAL HEX 7 PIECE METRIC IMPACT SOCKET SET > CR-MO alloy steel for long life > Fully guaranteed > Heavy duty blow mold case
3500
INCLUDES:
3" 5" 10" 15"
3/8" DRIVE EXTENSIONS 4 PIECE IMPACT SET > CR-MO alloy steel for long life > Fully guaranteed > Heavy molded storage tray
3305
INCLUDES:
3/8" Dr. Universal Joint
3/8"(F) x 1/2"(M) Adapter
1/2" Universal Joint
1/2"(F) x 3/8"(M) Adapter
1/2"(F) x 3/4"(M) Adapter
3/8" & 1/2" DRIVE ADAPTER & UNIVERSAL JOINT 5 PIECE IMPACT SET > CR-MO alloy steel for long life > Fully guaranteed (except adapters) > Heavy duty blow mold case
-
16 SUNEX TOOLS
3/8" DRIVE IMPACT SOCKETS
Standard Deep
Universal
Magnetic
Deep Universal
Hex
Universal Hex 12 Point
Standard Deep
Universal
Magnetic
Deep Universal
Hex
Universal Hex 12 Point
3/8" DRIVE INDIVIDUAL SAE SOCKETS
Size Standard Deep Universal Deep Univ. Magnetic Hex Hex Univ. 12 Point
Inches Model# Model# Model# Model# Model# Model# Model# Model#
3/16 36471 365802
7/32 36472 365804
1/4 308MG 36473 365806
5/16 310 310D 310U 310UD 310MG 36474 365808 36801
3/8 312 312D 312U 312UD 312MG 36475 365810 36802
7/16 314 314D 314U 314UD 314MG 36476 365812 36803
1/2 316 316D 316U 316UD 316MG 36477 365814 36804
9/16 318 318D 318U 318UD 318MG 36478 36805
5/8 320 320D 320U 320UD 320MG 36479 36806
11/16 322 322D 322U 322UD 322MG 36807
3/4 324 324D 324U 324UD 324MG 36808
13/16 326 326D 326U 326UD 36809
7/8 328 328D 368010
15/16 330 330D 368011
1 332 332D 368012
3/8" DRIVE INDIVIDUAL METRICSOCKETS
Size Standard Deep Universal Deep Univ. Magnetic Hex Hex Univ. 12 Point
mm Model# Model# Model# Model# Model# Model# Model# Model#
4 36481 365904
5 36482 365905
6 36483 365906
7 307M 307MD 307MMG 36484 365907 368207
8 308M 308MD 308MMG 36485 365908 368208
9 309M 309MD 309MMG 36486 368209
10 310M 310MD 310UM 310UMD 310MMG 36487 365910 368210
11 311M 311MD 311UM 311UMD 311MMG 368211
12 312M 312MD 312UM 312UMD 312MMG 36488 365912 368212
13 313M 313MD 313UM 313UMD 313MMG 368213
14 314M 314MD 314UM 314UMD 314MMG 36489 368214
15 315M 315MD 315UM 315UMD 315MMG 368215
16 316M 316MD 316UM 316UMD 316MMG 364810 368216
17 317M 317MD 317UM 317UMD 317MMG 364811 368217
18 318M 318MD 318UM 318UMD 318MMG 368218
19 319M 319MD 319UM 319UMD 319MMG 368219
21 321M 321MD
22 322M 322MD 322UM
3/8" DRIVE SPECIALTY SOCKET Item Model #
12mm 12 Point Universal
for Ford Driveshafts
312ZUM
-
SUNEX TOOLS 17Note: For full warranty information, see page 144.
3/8" DRIVE IMPACT SOCKETS
3/8" DRIVE INDIVIDUAL ADAPTERSItem Model #
3/8"(F) x 1/2"(M) 3300
1/2"(F) x 3/8"(M) 2301
3/8" DRIVE INDIVIDUAL EXTENSIONSItem Model #
3" 3503
5" 3505
10" 3510
15" 3515
3/8" DRIVE INDIVIDUAL UNIVERSAL JOINTItem Model #
Universal Joint 3301
3/8" DRIVE INDIVIDUAL INTERNAL STAR SOCKETS
Size Model #
T20 3670S1
T25 3670S2
T27 3670S3
T30 3670S4
T40 3670S5
T45 3670S6
T47 3670S7
T50 3670S8
T55 3670S9
3/8" DRIVE INDIVIDUAL EXTERNAL STAR SOCKETSSize Model #
E4 304SE
E5 3670SE1
E6 3670SE2
E7 3670SE3
E8 3670SE4
E10 3670SE5
E11 3670SE6
E12 3670SE7
E14 3670SE8
E16 3670SE9
-
18 SUNEX TOOLS
1/2" DRIVE IMPACT SOCKETS
2668
INCLUDES:
19 Standard Sockets:
3/8" 7/16" 1/2" 9/16"
5/8" 11/16" 3/4" 13/16"
7/8" 15/16" 1" 1-1/16"
1-1/8" 1-3/16" 1-1/4" 1-5/16"
1-3/8" 1-7/16" 1-1/2"
19 Deep Sockets:
3/8" 7/16" 1/2" 9/16"
5/8" 11/16" 3/4" 13/16"
7/8" 15/16" 1" 1-1/16"
1-1/8" 1-3/16" 1-1/4" 1-5/16"
1-3/8" 1-7/16" 1-1/2"
Universal Joint
1/2" DRIVE MASTER39 PIECE SAEIMPACT SOCKET SET> CR-MO alloy steel for long life> Fully guaranteed> Heavy duty blow mold case
2669
INCLUDES:
19 Standard Sockets:
9mm 10mm 11mm 12mm
13mm 14mm 15mm 16mm
17mm 18mm 19mm 20mm
21mm 22mm 23mm 24mm
26mm 27mm 30mm
19 Deep Sockets:
9mm 10mm 11mm 12mm
13mm 14mm 15mm 16mm
17mm 18mm 19mm 20mm
21mm 22mm 23mm 24mm
26mm 27mm 30mm
Universal Joint
1/2" DRIVE MASTER39 PIECE METRICIMPACT SOCKET SET> CR-MO alloy steel for long life> Fully guaranteed> Heavy duty blow mold case
-
SUNEX TOOLS 19Note: For full warranty information, see page 144.
1/2" DRIVE IMPACT SOCKETS
2650
INCLUDES:
7/16" 1/2" 9/16" 5/8"
11/16" 3/4" 13/16" 7/8"
15/16" 1" 1-1/16" 1-1/8"
1-1/4"
1/2" DRIVE STANDARD 13 PIECE SAE IMPACT SOCKET SET > CR-MO alloy steel for long life > Fully guaranteed > Heavy molded storage tray
2652
INCLUDES:
10mm 11mm 12mm 13mm
14mm 15mm 16mm 17mm
18mm 19mm 21mm 22mm
26mm 27mm
1/2" DRIVE STANDARD 14 PIECE METRIC IMPACT SOCKET SET > CR-MO alloy steel for long life > Fully guaranteed > Heavy molded storage tray
2651
INCLUDES:
7/16" 1/2" 9/16" 5/8"
11/16" 3/4" 13/16" 7/8"
15/16" 1" 1-1/16" 1-1/8"
1-1/4"
1/2" DRIVE DEEP 13 PIECE SAE IMPACT SOCKET SET > CR-MO alloy steel for long life > Fully guaranteed > Heavy molded storage tray
2653
INCLUDES:
10mm 11mm 12mm 13mm
14mm 15mm 16mm 17mm
18mm 19mm 21mm 22mm
26mm 27mm
1/2" DRIVE DEEP 14 PIECE METRIC IMPACT SOCKET SET > CR-MO alloy steel for long life > Fully guaranteed > Heavy molded storage tray
-
20 SUNEX TOOLS
1/2" DRIVE IMPACT SOCKETS
2672
INCLUDES:
10mm 11mm 12mm 13mm
14mm 15mm 16mm 17mm
18mm 19mm 20mm 21mm
22mm 23mm 24mm
1/2" DRIVE 12 POINT DEEP15 PIECE METRICIMPACT SOCKET SET> CR-MO alloy steel for long life> Fully guaranteed> Heavy duty blow mold case> Ideal for working in tight areas> Reduces wear on fasteners
2670
INCLUDES:
3/8" 7/16" 1/2" 9/16"
5/8" 11/16" 3/4" 13/16"
7/8" 15/16" 1" 1-1/16"
1-1/8" 1-3/16" 1-1/4"
1/2" DRIVE 12 POINT DEEP15 PIECE SAEIMPACT SOCKET SET> CR-MO alloy steel for long life> Fully guaranteed> Heavy duty blow mold case> Ideal for working in tight areas> Reduces wear on fasteners
2678
INCLUDES:
7/16" 1/2" 9/16" 5/8"
11/16" 3/4" 13/16" 7/8"
15/16" 1" 1-1/16" 1-1/8"
1-3/16" 1-1/4"
1/2" DRIVE 12 POINT14 PIECE SAEIMPACT SOCKET SET> CR-MO alloy steel for long life> Fully guaranteed> Heavy molded storage tray> Ideal for working in tight areas> Reduces wear on fasteners
2679
INCLUDES:
10mm 11mm 12mm 13mm
14mm 15mm 16mm 17mm
18mm 19mm 21mm 22mm
24mm
1/2" DRIVE 12 POINT13 PIECE METRICIMPACT SOCKET SET> CR-MO alloy steel for long life> Fully guaranteed> Heavy molded storage tray> Ideal for working in tight areas> Reduces wear on fasteners
-
SUNEX TOOLS 21Note: For full warranty information, see page 144.
1/2" DRIVE IMPACT SOCKETS
5153DD
INCLUDES:
13 Deep SAE Sockets:
7/16" 1/2" 9/16" 5/8"
11/16" 3/4" 13/16" 7/8"
15/16" 1" 1-1/16" 1-1/8"
1-1/4"
14 Deep Metric Sockets:
10mm 11mm 12mm 13mm
14mm 15mm 16mm 17mm
18mm 19mm 21mm 22mm
26mm 27mm
2 Deep Flip Sockets:
3/4" x 13/16 19mm x 21mm
1/2" DRIVE DEEP MASTER 29 PIECE SAE & METRIC IMPACT SOCKET SET > CR-MO alloy steel for long life > Fully guaranteed > Heavy duty blow mold case (replacement part #RS97301)
2845
INCLUDES:
1" 1-1/16" 1-1/8" 1-1/4"
1-5/16"
1/2" DRIVE EXTRA LONG 5 PIECE SAE IMPACT SOCKET SET > CR-MO alloy steel for long life > Fully guaranteed > Heavy duty blow mold case
2848
INCLUDES:
1/2" 9/16" 5/8" 11/16"
3/4" 13/16" 7/8" 15/16"
1/2" DRIVE EXTRA LONG 8 PIECE SAE IMPACT SOCKET SET > CR-MO alloy steel for long life > Fully guaranteed > Heavy duty blow mold case
-
22 SUNEX TOOLS
1/2" DRIVE IMPACT SOCKETS
2654
INCLUDES:
1/2" 9/16" 5/8" 11/16"
3/4" 13/16" 7/8"
1/2" DRIVE UNIVERSAL7 PIECE SAEIMPACT SOCKET SET> CR-MO alloy steel for long life> Fully guaranteed> Heavy molded storage tray
2849
INCLUDES:
6 SAE Sockets:
3/4" (light green) 13/16" (purple)
7/8" (green) 15/16" (brown)
1" (silver) 1-1/16" (black)
3 Metric Sockets:
17mm (blue) 19mm (yellow)
21mm (red)
1/2" DRIVE EXTRA THIN WALL9 PIECE SAE & METRICWHEEL PROTECTORIMPACT SOCKET SET> Durable outer sleeve and insert protects high polished wheels and lug nuts from damage> CR-MO alloy steel for long life> Fully guaranteed> Heavy duty blow mold case
2724
INCLUDES:
3/4" x 13/16" Flip Socket
7/8" x 15/16" Flip Socket
19mm x 21mm Flip Socket
3" Extension
1/2" DRIVE DEEP THIN WALL4 PIECE SAE & METRICIMPACT FLIP SOCKET SET> CR-MO alloy steel for long life> Fully guaranteed> Heavy duty blow mold case
2611
INCLUDES:
5 SAE Sockets:
3/4" 13/16" 7/8" 1"
1-1/16"
5 Metric Sockets:
17mm 19mm 21mm 22mm
23mm
3" Extension
1/2" DRIVE EXTRA THIN WALL DEEP11 PIECE SAE & METRICIMPACT SOCKET SET> CR-MO alloy steel for long life> Heavy duty blow mold case
-
SUNEX TOOLS 23Note: For full warranty information, see page 144.
1/2" DRIVE IMPACT SOCKETS
2655
INCLUDES:
13mm 14mm 15mm 16mm
17mm 18mm 19mm
1/2" DRIVE UNIVERSAL 7 PIECE METRIC IMPACT SOCKET SET > CR-MO alloy steel for long life > Fully guaranteed > Heavy molded storage tray
2657
INCLUDES:
7/16" 1/2" 9/16" 5/8"
11/16" 3/4" 13/16" 7/8"
15/16"
1/2" DRIVE UNIVERSAL 9 PIECE SAE IMPACT SOCKET SET > CR-MO alloy steel for long life > Fully guaranteed > Heavy molded storage tray
2659
INCLUDES:
3/8" 7/16" 1/2" 9/16"
5/8" 11/16" 3/4" 13/16"
7/8" 15/16"
1/2" DRIVE DEEP UNIVERSAL 10 PIECE SAE IMPACT SOCKET SET > CR-MO alloy steel for long life > Fully guaranteed > Heavy molded storage tray
2658
INCLUDES:
10mm 11mm 12mm 13mm
14mm 15mm 16mm 17mm
18mm 19mm
1/2" DRIVE DEEP UNIVERSAL 10 PIECE METRIC IMPACT SOCKET SET > CR-MO alloy steel for long life > Fully guaranteed > Heavy molded storage tray
-
24 SUNEX TOOLS
1/2" DRIVE IMPACT SOCKETS
1/2" DRIVE MASTER MAGNETIC25 PIECE SAE & METRICIMPACT SOCKET SET> CR-MO alloy steel for long life> Fully guaranteed> Heavy duty blow mold case> Magnetized to hold fasteners securely during installation and removal
2680
SIZES INCLUDED:
11 SAE sockets:
3/8" 7/16" 1/2" 9/16"
5/8" 11/16" 3/4" 13/16"
7/8" 15/16" 1"
12 Metric sockets:
10mm 11mm 12mm
13mm 14mm 15mm
16mm 17mm 18mm
19mm 20mm 21mm
Universal Joint
3" Extension
2839
INCLUDES:
29mm 30mm 32mm 34mm
35mm 36mm 38mm
1/2" DRIVE DEEP SPINDLE NUT7 PIECE METRICIMPACT SOCKET SET> Deep design for GM & Chrysler spindle nut applications> CR-MO alloy steel for long life> Fully guaranteed> Heavy duty blow mold case
2838
INCLUDES:
30mm 32mm 34mm 36mm
1/2" DRIVE DEEP SPINDLE NUT4 PIECE METRICIMPACT SOCKET SET> Deep design for GM & Chrysler spindle nut applications> CR-MO alloy steel for long life> Fully guaranteed> Heavy duty blow mold case (replacement part #RS97101)
-
SUNEX TOOLS 25Note: For full warranty information, see page 144.
1/2" DRIVE IMPACT SOCKETS
2690S
INCLUDES:
T30 T40 T45 T47
T50 T55 T60 T70
1/2" DRIVE INTERNAL STAR 8 PIECE IMPACT SOCKET SET > CR-MO alloy steel for long life > Fully guaranteed > Heavy duty blow mold case
2690SE
INCLUDES:
E10 E11 E12 E14
E16 E18 E20 E22
E24
1/2" DRIVE EXTERNAL STAR 9 PIECE IMPACT SOCKET SET > CR-MO alloy steel for long life > Fully guaranteed > Heavy duty blow mold case
1/2" DRIVE WHEEL LOCK REMOVAL KIT > CR-MO alloy steel for long life > Fully guaranteed > Heavy duty blow mold case
2840
Included:
GM Hubcap Lock Remover
GM Sprocket Hubcap Remover
Ford & Chrysler Hubcap Lock Remover
Large Univ. Locking Lug Nut Remover
Large Wheel Cover Lock Remover
Remover for Stripped 18mm Lug Nuts
Oversize Wheel Lock Remover
GM “M” & “F” Body Wheel Lock Remover
Lug Nut Remover Punch
2648
INCLUDES:
1/4" 5/16" 3/8" 7/16"
1/2" 9/16" 5/8" 3/4"
1/2" DRIVE HEX 8 PIECE SAE IMPACT SOCKET SET > CR-MO alloy steel for long life > Fully guaranteed > Heavy duty blow mold case
-
26 SUNEX TOOLS
1/2" DRIVE IMPACT SOCKETS
2649
INCLUDES:
6mm 7mm 8mm 10mm
12mm 14mm 17mm 19mm
1/2" DRIVE HEX8 PIECE METRICIMPACT SOCKET SET> CR-MO alloy steel for long life> Fully guaranteed> Heavy duty blow mold case
2748
INCLUDES:
1/4" 5/16" 3/8" 7/16"
1/2" 9/16" 5/8" 3/4"
1/2" DRIVE UNIVERSAL HEX8 PIECE SAEIMPACT SOCKET SET> CR-MO alloy steel for long life> Fully guaranteed> Heavy duty blow mold case
2749
INCLUDES:
6mm 7mm 8mm 10mm
12mm 14mm 17mm 19mm
1/2" DRIVE UNIVERSAL HEX8 PIECE METRICIMPACT SOCKET SET> CR-MO alloy steel for long life> Fully guaranteed> Heavy duty blow mold case
2500
INCLUDES:
3" 5" 10" 15"
1/2" DRIVE EXTENSIONS4 PIECE IMPACT SET> Steel ball retainer on male end> CR-MO alloy steel for long life> Fully guaranteed> Heavy molded storage tray
-
SUNEX TOOLS 27Note: For full warranty information, see page 144.
1/2" DRIVE IMPACT SOCKETS
Radius corner design causes the socket to grab the sturdy wall, or fl at, of the fastener instead of grabbing the corners, resulting in less corner wear on the fastener.
All sockets are also available individually
Size Standard DeepExtra Long Universal
Deep Universal 12 Point
12 Point Deep
Extra Thin-Wall Deep Magnetic Hex
Universal Hex
Wheel Protect.
Inches Model# Model# Model# Model# Model# Model# Model# Model # Model# Model# Model# Model#
1/4 26481 274806
5/16 210XD 26482 274808
3/8 212 212D 212XD 212UD 26701 212MG 26483 274810
7/16 214 214D 214XD 214U 214UD 214Z 26702 214MG 26484 274812
1/2 216 216D 216XD 216U 216UD 216Z 26703 216MG 26485 274814
9/16 218 218D 218XD 218U 218UD 218Z 26704 218MG 26486 274816
5/8 220 220D 220XD 220U 220UD 220Z 26705 220MG 26487 274818
11/16 222 222D 222XD 222U 222UD 222Z 26706 222MG 26488
3/4 224 224D 224XD 224U 224UD 224Z 26707 2624 224MG 26489 274820 28492
13/16 226 226D 226XD 226U 226UD 226Z 26708 2626 226MG 264810 28494
7/8 228 228D 228XD 228U 228UD 228Z 26709 2628 228MG 28496
15/16 230 230D 230XD 230U 230UD 230Z 267010 230MG 28498
1 232 232D 232XD 232Z 267011 2632 232MG 284910
1-1/16 234 234D 234XD 234Z 267012 2634 284912
1-1/8 236 236D 236XD 236Z 267013
1-3/16 238 238D 238XD 238Z 267014
1-1/4 240 240D 240XD 240Z 267015
1-5/16 242 242D 242XD
1-3/8 244 244D 244XD
1-7/16 246 246D 246XD
1-1/2 248 248D 248XD
1/2" DRIVE INDIVIDUAL SAE
SOCKETS
-
28 SUNEX TOOLS
1/2" DRIVE IMPACT SOCKETS
1/2" DRIVE INDIVIDUAL METRICSOCKETS
Size Standard Deep UniversalDeep Universal 12 Point
12 Point Deep
Extra Thin-Wall Deep Magnetic Hex
Universal Hex
Wheel Protect.
mm Model# Model# Model# Model# Model# Model# Model# Model# Model# Model#
6 26491 274906
7 26492 274907
8 26493 274908
9 209M 209MD 26494
10 210M 210MD 210UMD 210ZM 267210 210MMG 26495 274910
11 211M 211MD 211UMD 211ZM 267211 211MMG
12 212M 212MD 212UMD 212ZM 267212 212MMG 26496 274912
13 213M 213MD 213UM 213UMD 213ZM 267213 213MMG
14 214M 214MD 214UM 214UMD 214ZM 267214 214MMG 26497 274914
15 215M 215MD 215UM 215UMD 215ZM 267215 215MMG 264912
16 216M 216MD 216UM 216UMD 216ZM 267216 216MMG 26498
17 217M 217MD 217UM 217UMD 217ZM 267217 2617 217MMG 26499 274917 284917
18 218M 218MD 218UM 218UMD 218ZM 267218 218MMG 264913
19 219M 219MD 219UM 219UMD 219ZM 267219 2619 219MMG 264910 274919 284919
20 220M 220MD 220UMD 267220 220MMG
21 221M 221MD 221UM 221UMD 221ZM 267221 2621 221MMG 264911 284921
22 222M 222MD 222UM 222UMD 222ZM 267222 2622
23 223M 223MD 223UMD 267223 2623
24 224M 224MD 224UMD 224ZM 267224
26 226M 226MD
27 227M 227MD
30 230M 230MD 230ZMD
32 232MD 232ZMD
34 234ZMD
-
SUNEX TOOLS 29Note: For full warranty information, see page 144.
1/2" DRIVE IMPACT SOCKETS
1/2" DRIVE INDIVIDUAL ADAPTERSItem Model #
1/2"(F) x 3/8"(M) 2301
1/2"(F) x 3/4"(M) 2302
1/2" DRIVE INDIVIDUAL EXTENSIONSItem Model #
3" 2503
5" 2505
10" 2510
15" 2515
24" 2524
36" 2536
36" for Transmissions1/2"(F) x 3/8"(M)
2536T
1/2" DRIVE INDIVIDUALUNIVERSAL JOINTItem Model #
Universal Joint 2300
1/2" DRIVE INDIVIDUALINTERNAL STAR SOCKETSSize Model #
T30 2690S1
T40 2690S2
T45 2690S3
T47 2690S4
T50 2690S5
T55 2690S6
T60 2690S7
T70 2690S8
1/2" DRIVE INDIVIDUALEXTERNAL STAR SOCKETSSize Model #
E10 2690SE1
E11 2690SE2
E12 2690SE3
E14 2690SE4
E16 2690SE5
E18 2690SE6
E20 2690SE7
E22 2690SE8
E24 2690SE9
-
30 SUNEX TOOLS
1/2" DRIVE IMPACT SOCKETS
Deep Spindle Nut
Heavy Duty Deep
Tie Rod
Hubcap Lock Removers
Extractor Punch
Lug Nut Remover
1/2" DRIVE INDIVIDUALSPECIALTY SOCKETS Size Model #
29mm Deep Spindle Nut 2830
30mm Deep Spindle Nut 2800
32mm Deep Spindle Nut 2832
34mm Deep Spindle Nut 2834
35mm Deep Spindle Nut 2806
36mm Deep Spindle Nut 2802
38mm Deep Spindle Nut 2803
Tie Rod Socket 2801
1-1/4" Heavy Duty Deep 240HDD
1/2" DRIVE INDIVIDUALWHEEL LOCK REMOVAL Size Model #
Ford & Chrysler Hubcap Locks 28401
Ford Wheel Locks & 18mm Lug Nuts 28402
Corvette, GM “M” & “F” Hubcap Locks 28403
Oversize McGard Wheel Locks 28404
McGard Wheel Locks and GM Hubcap Locks 28405
Extractor Punch 28406
Chrysler Hubcap Locks 28407
GM Hubcap Locks 28408
GM Spline Hubcap Locks 28409
1/2" DRIVE INDIVIDUALFLIP SOCKETS Size Model #
3/4" x 13/16" 2700
3/4" x 13/16" Deep 2701
3/4" x 13/16" Deep Thin Wall 2706
7/8" x 15/16" Thin Wall 2710
1" x 1-1/16" Deep Thin Wall 2712
17mm x 19mm 2707
17mm x 21mm Deep 2705
19mm x 21mm 2702
3/4" x 13/16" with 3" Extension Bar 2703
19mm x 21mm Deep 2704
19mm x 21mm Deep Extra Thin Wall 2708
-
SUNEX TOOLS 31Note: For full warranty information, see page 144.
3/4" DRIVE IMPACT SOCKETS
4680
INCLUDES:
1" 1-1/16" 1-1/8" 1-1/4"
1-5/16" 1-3/8" 1-7/16" 1-1/2"
3/4" DRIVE STANDARD 8 PIECE SAE IMPACT SOCKET SET > CR-MO alloy steel for long life > Fully guaranteed > Industrial strength, double latch blow mold case (replacement case available: RS4680BMC)
4681
INCLUDES:
1" 1-1/16" 1-1/8" 1-1/4"
1-5/16" 1-3/8" 1-7/16" 1-1/2"
3/4" DRIVE DEEP 8 PIECE SAE IMPACT SOCKET SET > CR-MO alloy steel for long life > Fully guaranteed > Industrial strength, double latch blow mold case (replacement case available: RS4681BMC)
4682
INCLUDES:
10 Standard Sockets:
3/4" 13/16" 7/8" 15/16"
1" 1-1/16" 1-1/8" 1-3/16"
1-1/4" 1-1/2"
1 Square Socket:
13/16"
3/4" DRIVE TRUCK SERVICE 11 PIECE SAE IMPACT SOCKET SET > CR-MO alloy steel for long life > Fully guaranteed > Industrial strength, double latch blow mold case (replacement case available: RS4682BMC)
4011M
INCLUDES:
8 Deep Sockets:
27mm 30mm 32mm 33mm
35mm 36mm 38mm 41mm
3 Square Sockets:
17mm 20mm 21mm
3/4" DRIVE DEEP TRUCK SERVICE 11 PIECE METRIC IMPACT SOCKET SET > CR-MO alloy steel for long life > Fully guaranteed > Industrial strength, double latch blow mold case (replacement case available: RS4011MBMC)
-
32 SUNEX TOOLS
3/4" DRIVE IMPACT SOCKETS
4070M
INCLUDES:
5 Deep Sockets:
27mm 30mm 33mm 35mm
41mm
2 Square Sockets:
17mm 21mm
3/4" DRIVE DEEP TRUCK SERVICE7 PIECE METRICIMPACT SOCKET SET> CR-MO alloy steel for long life> Fully guaranteed> Industrial strength, double latch blow mold case (replacement case available: RS4070MBMC)
3/4" DRIVE 4 PIECE COMBINATION BUDD WHEELIMPACT SOCKET SET> CR-MO alloy steel for long life> Fully guaranteed> Industrial strength, double latch blow mold case (replacement case available: RS4626BMC)
4626
INCLUDES:
3 Square Budd Wheel Sockets:
1-1/2" x 13/16"
35mm x 17mm 41mm x 21mm
1 Deep Socket
33mm
4050
INCLUDES:
4 Deep Sockets:
1-1/16" 1-1/4" 1-1/2" 33mm
1 Square Socket:
13/16"
3/4" DRIVE WHEEL SERVICE5 PIECE SAE & METRICIMPACT SOCKET SET> CR-MO alloy steel for long life> Fully guaranteed> Industrial strength, double latch blow mold case (replacement case available: RS4050BMC)
4050M
INCLUDES:
2 Standard Sockets:
27mm 30mm
2 Deep Sockets:
33mm 35mm
1 Square Socket:
17mm
3/4" DRIVE WHEEL SERVICE5 PIECE METRICIMPACT SOCKET SET> CR-MO alloy steel for long life> Fully guaranteed> Industrial strength, double latch blow mold case (replacement case available: RS4050MBMC)
-
SUNEX TOOLS 33Note: For full warranty information, see page 144.
3/4" DRIVE IMPACT SOCKETS
4683
INCLUDES:
1" 1-1/16" 1-1/8" 1-3/16"
1-1/4" 1-5/16" 1-3/8" 1-7/16"
1-1/2" 1-9/16" 1-5/8" 1-11/16"
1-3/4" 1-13/16" 1-7/8" 1-15/16"
2"
3/4" DRIVE HEAVY DUTY 17 PIECE SAE IMPACT SOCKET SET > CR-MO alloy steel for long life > Fully guaranteed > Ideal for work in tight spaces > Reduces wear on fasteners > Industrial strength, double latch blow mold case (replacement case available: RS4683BMC)
4687
INCLUDES:
3/4" 13/16" 7/8" 15/16"
1" 1-1/16" 1-1/8" 1-3/16"
1-1/4"
3/4" DRIVE 12 POINT THIN WALL 9 PIECE SAE IMPACT SOCKET SET > CR-MO alloy steel for long life > Fully guaranteed > Ideal for work in tight spaces > Reduces wear on fasteners > Industrial strength, double latch blow mold case (replacement case available: RS4687BMC)
4506
INCLUDES:
3/4" 7/8" 1" 1-1/8"
1-1/4"
3/4" DRIVE HEX 5 PIECE SAE IMPACT SOCKET SET > CR-MO alloy steel for long life > Fully guaranteed > Heavy duty blow mold case (replacement case available: RS4506BMC)
4507
INCLUDES:
14mm 17mm 19mm 22mm
24mm
3/4" DRIVE HEX 5 PIECE METRIC IMPACT SOCKET SET > CR-MO alloy steel for long life > Fully guaranteed > Heavy duty blow mold case (replacement case available: RS4507BMC)
-
34 SUNEX TOOLS
3/4" DRIVE IMPACT SOCKETS
Square Heavy Duty Square
Deep Thin Wall
Limited Depth Budd Wheel
Combination Budd Wheel
Extra Long
Deep Hex Budd Wheel
Square Heavy Duty Square
Combination Budd Wheel
Extra Long
Deep Hex Budd Wheel
3/4" & 1" DRIVE 5 PIECE ADAPTER & UNIVERSAL JOINTIMPACT SET> CR-MO alloy steel for long life> Fully guaranteed (except reducers and adapters)> Heavy duty blow mold case
4405
INCLUDES:
3/4" Dr. Universal Joint
3/4" Dr. 1/2" Reducer
3/4" Dr. 1" Adapter
1" Dr. 3/4" Reducer
1" Dr. Universal Joint
3/4" DRIVE INDIVIDUALSAE SPECIALTY SOCKETS
Size Square
Heavy Duty Square
Deep Thin Wall
Comb. Budd Wheel
Limited Depth Budd Wheel
Deep Hex Budd Wheel
Extra Long
Inches Model# Model# Model# Model# Model# Model# Model#
13/16 426S 426HDS 426XL
15/16 430S
1-1/16 434DT 434XL
1-1/8 436DT 436XL
1-1/4 440DT 440XL
1-1/2 448LD 448DH 448XL
1-1/2 x
13/16
4826C
3/4" DRIVE INDIVIDUAL METRIC SPECIALTY SOCKETS Size Square
Double Square
Comb. Budd Wheel Extra Long
mm Model# Model# Model# Model#
17 417MSS
19 419MS
20 420MS
21 421MSS
33 433MXL
35 X 17 43517B
41 X 21 4121C
-
SUNEX TOOLS 35Note: For full warranty information, see page 144.
3/4" DRIVE IMPACT SOCKETS
All sockets are also available individually
Standard Deep
Hex 12 Point Thin Wall
3/4" DRIVE INDIVIDUAL SAE SOCKETS
Size Standard Deep Hex 12 Point Thin Wall
Inches Model# Model# Model# Model#
5/8 420 420D 420ZT
11/16 422 422D 422ZT
3/4 424 424D 45061 424ZT
13/16 426 426D 426ZT
7/8 428 428D 45062 428ZT
15/16 430 430D 430ZT
1 432 432D 45063 432ZT
1-1/16 434 434D 434ZT
1-1/8 436 436D 45064 436ZT
1-3/16 438 438D 438ZT
1-1/4 440 440D 45065 440ZT
1-5/16 442 442D
1-3/8 444 444D 444ZT
1-7/16 446 446D
1-1/2 448 448D 448ZT
1-9/16 450 450D
1-5/8 452 452D 452ZT
1-11/16 454 454D
1-3/4 456 456D 456ZT
1-13/16 458 458D
1-7/8 460 460D 460ZT
1-15/16 462 462D
2 464 464D
2-1/16 466 466D
2-1/8 468 468D
2-3/16 470 470D
2-1/4 472 472D
2-5/16 474 474D
2-3/8 476 476D
2-7/16 478 478D
2-1/2 480 480D
2-9/16 482 482D
2-5/8 484 484D
2-11/16 486 486D
2-3/4 488 488D
2-13/16 490 490D
2-7/8 492 492D
2-15/16 494 494D
3 496 496D
-
36 SUNEX TOOLS
3/4" DRIVE IMPACT SOCKETS
Standard Deep
Hex 12 Point Thin Wall
3/4" DRIVE INDIVIDUALMETRIC SOCKETS
Size Standard Deep Hex 12 Point Thin Wall
mm Model# Model# Model# Model#
14 450714
15 415MZT
16 416MZT
17 450717 417MZT
18 418MZT
19 419M 419MD 450719 419MZT
20 420M 420MD 420MZT
21 421M 421MD 421MZT
22 422M 422MD 450722 422MZT
23 423M 423MD 423MZT
24 424M 424MD 450724 424MZT
25 425M 425MD 425MZT
26 426M 426MD 426MZT
27 427M 427MD 427MZT
28 428M 428MD 428MZT
29 429M 429MD 429MZT
30 430M 430MD 430MZT
32 432M 432MD 432MZT
33 433M 433MD 433MZT
35 435M 435MD 435MZT
36 436M 436MD 426MZT
38 438M 438MD 438MZT
40 440M 440MD 440MZT
41 441M 441MD
42 442M 442MD
43 443M 443MD
44 444M 444MD
45 445M
46 446M 446MD
47 447M 447MD
48 448M 448MD
49 449M 449MD
50 450M 450MD
52 452M 452MD
54 454M
55 455M 455MD
56 456M
60 460M 460MD
63 463M
65 465M 465MD
-
SUNEX TOOLS 37Note: For full warranty information, see page 144.
3/4" DRIVE IMPACT SOCKETS
Rugged metal latch for secure closure clasp
Removable pin hinge provides durability and optional lid removal
Plastic side latchesprovides additionalstability
Impact resistant heavy duty blow mold case
3/4" DRIVE INDIVIDUAL ADAPTERSItem Model #
3/4"(F) x 1"(M) 4300
3/4"(F) x 1/2"(M) 4301
3/4" DRIVE INDIVIDUAL EXTENSIONSItem Model #
6" 4302
10" 4310
13" 4313
3/4" DRIVE INDIVIDUAL UNIVERSAL JOINTItem Model #
Universal Joint 4304
3/4" DRIVE INDIVIDUAL RETAINING PIN & RING SETItem Model #
Pin & Ring Set 4303
-
38 SUNEX TOOLS
1" DRIVE IMPACT SOCKETS
5699
INCLUDES:
1" 1-1/8" 1-1/4" 1-3/8"
1-1/2" 1-5/8" 1-3/4" 1-7/8"
2"
1" DRIVE JUMBO STANDARD9 PIECE SAEIMPACT SOCKET SET> CR-MO alloy steel for long life> Fully guaranteed> Industrial strength, double latch blow mold case (replacement case available: RS5699BMC)
5681
INCLUDES:
7/8" 15/16" 1" 1-1/16"
1-1/8" 1-3/16" 1-1/4" 1-1/2"
1" DRIVE DEEP8 PIECE SAEIMPACT SOCKET SET> CR-MO alloy steel for long life> Fully guaranteed> Industrial strength, double latch blow mold case (replacement case available: RS5681BMC)
5697M
INCLUDES:
5 Deep Sockets:
27mm 33mm 35mm 36mm
41mm
2 Square Sockets:
17mm 21mm
1" DRIVE DEEP7 PIECE METRICIMPACT SOCKET SET> CR-MO alloy steel for long life> Fully guaranteed> Industrial strength, double latch blow mold case (replacement case available: RS5697MBMC)
5690A
INCLUDES:
4 Deep Sockets:
1" 1-3/16" 1-3/4" 33mm
3 Deep Thin Wall Sockets:
1-1/16" 1-1/8" 1-1/4"
2 Square Sockets:
13/16" 15/16"
1 Controlled Depth Socket:
1-1/2"
1" DRIVE HEAVY DUTY WHEEL10 PIECE SAE & METRICIMPACT SOCKET SET> CR-MO alloy steel for long life> Fully guaranteed> Industrial strength, double latch blow mold case (replacement case available: RS5690ABMC)
-
SUNEX TOOLS 39Note: For full warranty information, see page 144.
1" DRIVE IMPACT SOCKETS
5685
INCLUDES:
2 Deep Sockets:
1-1/2" 33mm
2 Deep Thin Wall Sockets:
1-1/8" 1-1/4"
1 Square Socket:
13/16"
1" DRIVE WHEEL SERVICE 5 PIECE SAE & METRIC IMPACT SOCKET SET > CR-MO alloy steel for long life > Fully guaranteed > Industrial strength, double latch blow mold case (replacement case available: RS5685BMC)
5688
INCLUDES:
3 Standard Sockets:
7/8" 1" 33mm
3 Deep Thin Wall Sockets:
1-1/16" 1-1/8" 1-1/4"
1 Square Socket:
13/16"
1 Controlled Depth Socket:
1-1/2"
1" DRIVE WHEEL SERVICE 8 PIECE SAE & METRIC IMPACT SOCKET SET > CR-MO alloy steel for long life > Fully guaranteed > Industrial strength, double latch blow mold case (replacement case available: RS5688BMC)
5626
INCLUDES:
4 Square Budd Wheel Sockets:
1-1/2" x 13/16" 35mm x 17mm
38mm x 20mm 41mm x 21mm
1 Deep Socket:
33mm
1" DRIVE COMBINATION BUDD WHEEL 5 PIECE SAE & METRIC IMPACT SOCKET SET > CR-MO alloy steel for long life > Fully guaranteed > Industrial strength, double latch blow mold case (replacement case available: RS5626BMC)
-
40 SUNEX TOOLS
1" DRIVE IMPACT SOCKETS
Standard Deep
Square
Heavy Duty Square
Deep Thin Wall
Controlled DepthCombination Budd Wheel
Extra Long
Extra Deep
1" DRIVE INDIVIDUAL SAE SOCKETS
Size Standard Deep
Inches Model# Model#
3/4 524 524D
13/16 526D
7/8 528 528D
15/16 530 530D
1 532 532D
1-1/16 534 534D
1-1/8 536 536D
1-3/16 538 538D
1-1/4 540 540D
1-5/16 542 542D
1-3/8 544 544D
1-7/16 546 546D
1-1/2 548 548D
1-9/16 550 550D
1-5/8 552 552D
1-11/16 554 554D
1-3/4 556 556D
1-13/16 558 558D
1-7/8 560 560D
1-15/16 562 562D
2 564 564D
2-1/16 566 566D
2-1/8 568 568D
2-3/16 570 570D
Size Standard Deep
Inches Model# Model#
2-1/4 572 572D
2-5/16 574 574D
2-3/8 576 576D
2-7/16 578 578D
2-1/2 580 580D
2-9/16 582 582D
2-5/8 584 584D
2-11/16 586 586D
2-3/4 588 588D
2-13/16 590 590D
2-7/8 592 592D
2-15/16 594 594D
3 596 596D
3-1/8 5100 5100D
3-1/4 5104 5104D
3-3/8 5108 5108D
3-1/2 5112 5112D
3-5/8 5116 5116D
3-3/4 5120 5120D
3-7/8 5124 5124D
4 5128 5128D
4-1/8 5132 5132D
4-1/4 5136 5136D
4-1/2 5140 5140D
1" DRIVE INDIVIDUAL SAE SPECIALTY SOCKETS
Size Square
Deep Thin Wall
Extra Long
Comb. Budd Wheel
Cont. Depth
Heavy Duty Square
Extra Deep
Inches Model# Model# Model# Model# Model# Model# Model#
13/16 526S 526HDS
15/16 530S
1-1/16 534DT
1-1/8 536DT
1-1/4 540DT 540EL
1-5/16 542DT
1-1/2 548DT 548CDS
1-3/4 556XD
1-1/2 x 13/16
5826C
-
SUNEX TOOLS 41Note: For full warranty information, see page 144.
1" DRIVE IMPACT SOCKETS
Radius corner design causes the socket to grab the sturdy wall, or fl at, of the fastener instead of grabbing the corners, resulting in less corner wear on the fastener.
All sockets are also available individually
Standard Deep
Square Heavy Duty Square
Deep Thin Wall
Combination Budd Wheel
Extra Long
1" DRIVE INDIVIDUAL METRIC SOCKETS
Size Standard Deep
mm Model# Model#
19 519M 519MD
21 521M 521MD
22 522M 522MD
23 523M 523MD
24 524M 524MD
25 525M 525MD
26 526M 526MD
27 527M 527MD
28 528M
29 529M 529MD
30 530M 530MD
32 532M 532MD
33 533M 533MD
35 535M 535MD
36 536M 536MD
Size Standard Deep
mm Model# Model#
38 538M 538MD
40 540M 540MD
41 541M 541MD
42 542M 542MD
46 546M 546MD
50 550M
52 552M
54 554M
55 555M
56 556M
58 558M
60 560M
65 565M
70 570M
1" DRIVE INDIVIDUAL METRIC SPECIALTY SOCKETS
Size SquareDouble Square
Deep Thin Wall Extra Long
Comb. Budd Wheel
mm Model# Model# Model# Model# Model#
17 517MSS
19 519MS
20 520MS
21 521MSS
33 533MEL
41 541MDT
35 x 17 53517
38 x 20 53820
41 x 21 54121
-
42 SUNEX TOOLS
1" DRIVE IMPACT SOCKETS
1" DRIVE INDIVIDUALADAPTERS Item Model #
1"(F) x 3/4"(M) w/ ball ret. 5303
1"(F) x 1-1/2"(M) w/ pin hole 5306
1-1/2"(F) x 1"(M) w/ pin hole 6332
1" DRIVE INDIVIDUALEXTENSIONS Item Model #
6" 5300
10" 5310
13" 5313
1" DRIVE INDIVIDUALUNIVERSAL JOINT Item Model #
Universal Joint 5304
1" DRIVE INDIVIDUALRETAINING PIN & RING SETS Item Model #
1-11/16" Pin & Ring Set 5301
1-3/4" Pin & 1-7/8" Ring 5302
#5 SPLINE DRIVE INDIVIDUAL ADAPTERS Item Model #
#5(F) x 3/4"(M) w/ pin hole 5524
#5(F) x 1"(M) w/ ball ret. 5531
#5 SPLINE DRIVE INDIVIDUAL EXTENSIONS Item Model #
8" 5608
15" 5615
-
SUNEX TOOLS 43Note: For full warranty information, see page 144.
#5 SPLINE DRIVE IMPACT SOCKETS
Standard Deep
Standard Deep
Square Heavy Duty Square
Deep Thin Wall
Extra Deep Hex
Thin Wall
Controlled Depth
#5 SPLINE DRIVE INDIVIDUAL SAE SOCKETS
Size Standard Deep
Inches Model# Model#
7/8 5500S
15/16 5525
1-1/16 5526
1-1/8 5502
1-3/16 5504
1-1/4 5503
1-5/16 5534
1-3/8 5533
1-7/16 5535
1-1/2 5505 5548D
1-5/8 5506 5552D
1-3/4 5507 5556D
Size Standard Deep
Inches Model# Model#
1-13/16 5536
1-7/8 5508
1-15/16 5537
2 5509
2-1/8 5568
2-1/4 5572
2-3/8 5576
2-1/2 5580
2-5/8 5584
2-3/4 5588
3 5596
3-1/8 5600
#5 SPLINE DRIVE INDIVIDUAL METRIC SOCKETS
Size Standard Deep
mm Model# Model#
22 5522M
24 5524M
25 5525M
27 5527M
29 5529M
30 5530M
32 5532M
Size Standard Deep
mm Model# Model#
33 5533M 5533MD
35 5535M
36 5536MD
38 5538M
40 5540M
41 5541M
46 5546M
#5 SPLINE DRIVE INDIVIDUALSAE & METRIC
SPECIALTY SOCKETSSize Square
Heavy Duty Square Thin Wall
Deep Thin Wall
Cont. Depth
Extra Deep Hex
Model# Model# Model# Model# Model# Model#
13/16" 5532 5532HDS
7/8" 5500S
15/16" 5510
1-1/16" 5527
1-1/8" 5528
1-1/4" 5529
1-5/16 5542DT
1-1/2" 5548DT 5548CDS 5548XDH
1-1/2" x
13/16"
5530 5826C
17mm 5517MSS
21mm 5521MSS
35mm 5535MDT
41mm 5541MDT
-
The tools you need to get it done — whether
drilling, driving, grinding, cutting, sanding,
spraying or hammering, Sunex Tools® air tools
supply you with power, fl exibility and exceptional
value. When you need performance, you need
Sunex Tools® air tools.
AIR TOOLSTHE BEST TOOLS
FOR WORKINGUNDER PRESSURE
-
46 SUNEX TOOLS
AIR TOOLS
Comfort and performance
can fi nally coexist. Sunex
Tools® new line of super duty
air tools delivers the quality you
demand–coupled with comfort
grips that help you work as long
and hard as your air tool. After
using one of our new, super
duty air tools, anything else will
feel plain ordinary.
Locking throttlefor safety
Directional rear exhaust can be rotated a full 360º
Built-in speed regulator adds versatility and
control
Comfort grip housing improves grip
and decreases vibration
SUPERDUTY
-
SUNEX TOOLS 47
AIR TOOLS
3" UTILITYCUT-OFF TOOL> Durable comfort grip> Twin bearing spindle> Built-in speed regulator> Locking throttle lever for safety> High-torque motor for maximum efficiency> 360˚ adjustable rear exhaust directs air away from work
SXC208
Wheel Size (In.) 3
Length (In.) 7.6
Maximum Speed (RPM) 21,000
Air Inlet (In.) 1/4
Minimum Hose Diameter (In.) 3/8
Avg. Air Consumption (CFM) 3
Weight (Lbs.) 1.8
2" ANGLE GRINDER> Durable comfort grip> 90˚ angle head for restricted areas> Built-in speed regulator> Locking throttle lever for safety> High-torque motor for maximum efficiency> 360˚ adjustable rear exhaust directs air away from work
SXC606
Wheel Size (In.) 2
Length (In.) 7.4
Maximum Speed (RPM) 15,000
Air Inlet (In.) 1/4
Minimum Hose Diameter (In.) 3/8
Avg. Air Consumption (CFM) 3
Weight (Lbs.) 1.6
4.5" ANGLE GRINDER> Durable comfort grip> Built-in speed regulator> 100˚ angle head for restricted areas> Locking throttle lever for safety> 360˚ adjustable rear exhaust directs air away from work> High-torque motor for maximum efficiency
SXC610
Wheel Size (In.) 4.5
Length (In.) 9.6
Maximum Speed (RPM) 10,000
Air Inlet (In.) 1/4
Minimum Hose Diameter (In.) 3/8
Avg. Air Consumption (CFM) 5
Weight (Lbs.) 3.3
-
48 SUNEX TOOLS
1/4" MINIDIE GRINDER> Durable comfort grip> Twin bearing spindle increases precision and decreases vibration> 360˚ adjustable rear exhaust directs air away from work> Built-in speed regulator> Locking throttle lever for safety
1/4" MEDIUMDIE GRINDER> Durable comfort grip> Twin bearing spindle increases precision and decreases vibration> 360˚ adjustable rear exhaust directs air away from work> Built-in speed regulator> Locking throttle lever for safety
AIR TOOLS
2" ANGLE SANDER> Durable comfort grip> Ideal for sanding in tight areas> High torque motor for maximum efficiency> 90˚ angle head for restricted areas> 360˚ adjustable rear exhaust directs air away from work> Built-in speed regulator> Locking throttle lever for safety
SXC605
Pad Diameter (In.) 2
Length (In.) 7.8
Maximum Speed (RPM) 15,000
Air Inlet (In.) 1/4
Minimum Hose Diameter (In.) 3/8
Avg. Air Consumption (CFM) 3
Weight (Lbs.) 1.6
SXC205
Collet Size (In.) 1/4
Length (In.) 7
Maximum Speed (RPM) 22,000
Air Inlet (In.) 1/4
Minimum Hose Diameter (In.) 3/8
Avg. Air Consumption (CFM) 3
Weight (Lbs.) 1.3
SXC201
Collet Size (In.) 1/4
Length (In.) 6.1
Maximum Speed (RPM) 25,000
Air Inlet (In.) 1/4
Minimum Hose Diameter (In.) 3/8
Avg. Air Consumption (CFM) 2.1
Weight (Lbs.) 0.9
-
SUNEX TOOLS 49
AIR TOOLS
1/4" MINIANGLE DIE GRINDER> Durable comfort grip> 90˚ angle head for restricted areas> Twin bearing spindle increases precision and decreases vibration> Built-in speed regulator> 360˚ adjustable rear exhaust directs air away from work> Locking throttle lever for safety
1/4" RIGHT ANGLEDIE GRINDER> Durable comfort grip> Twin bearing spindle increases precision and decreases vibration> 90˚ angle head for restricted areas> Built-in speed regulator> 360˚ adjustable rear exhaust directs air away from work> Locking throttle lever for safety
TIRE BUFFER> Durable comfort grip> Accepts most standard buffing wheels> High torque motor for maximum efficiency> 360˚ adjustable rear exhaust directs air away from work> Built-in speed regulator> Buffing wheel not included
SXC602
Chuck Size (In.) 7/16
Length (In.) 8.9
Maximum Speed (RPM) 2,600
Air Inlet (In.) 1/4
Minimum Hose Diameter (In.) 3/8
Avg. Air Consumption (CFM) 3
Spindle Thread 3/8"-24
Weight (Lbs.) 1.9
SXC202
Collet Size (In.) 1/4
Length (In.) 6.1
Maximum Speed (RPM) 20,000
Air Inlet (In.) 1/4
Minimum Hose Diameter (In.) 3/8
Avg. Air Consumption (CFM) 2.1
Weight (Lbs.) 1.1
SXC206
Collet Size (In.) 1/4
Length (In.) 7
Maximum Speed (RPM) 18,000
Air Inlet (In.) 1/4
Minimum Hose Diameter (In.) 3/8
Avg. Air Consumption (CFM) 3
Weight (Lbs.) 1.7
-
AIR TOOLS
50 SUNEX TOOLS
1/4" DR. MINI AIR RATCHET WRENCH> Lever throttle for positive speed control
> Ball detent socket retainer
> Rear exhaust
> Also available: 1/4" head kit - part # RSRHK106B
SX106B
Free Speed (RPM) @ 90PSI 230
Torque (ft.lbs.) @ 90PSI 25
Square Drive (In.) 1/4
Air Inlet (NPT) 1/4
Min. Hose Size (I.D.) 3/8
Recommended Air Pressure (PSI) 90
Average Air Consumption (CFM) 3
Sound Level (dBA) 87
Length (In.) 8
Shipping Weight (Lbs.) 1.4
1/4" DR. CLOSED HEAD RATCHET> Closed head design prevents yoke spread under heavy
torque application
> Ergonomic comfort grip insulates and reduces vibration
> 360° adjustable rear exhaust
> 4-Setting air regulator collar for convenience
> Also available: 1/4" head kit - part # RSRHK112
SX112
Free Speed (RPM) @ 90PSI 250
Torque (ft.lbs.) @ 90PSI 30
Square Drive (In.) 1/4
Air Inlet (NPT) 1/4
Min. Hose Size (I.D.) 3/8
Recommended Air Pressure (PSI) 90
Average Air Consumption (CFM) 5
Length (In.) 8.5
Shipping Weight (Lbs.) 1.63
3/8" DR.AIR RATCHET WRENCH> Ball detent socket retainer
> Ribbed handle for positive grip
> 150 rpm for quick run down
> Outstanding value
> Also available: 3/8" ratchet head kit - part # RSRHK100
SX108A
Free Speed (RPM) @ 90PSI 150
Torque (ft.lbs.) @ 90PSI 45
Square Drive (In.) 3/8
Air Inlet (NPT) 1/4
Min. Hose Size (I.D.) 3/8
Recommended Air Pressure (PSI) 90
Average Air Consumption (CFM) 4
Sound Level (dBA) 88
Length (In.) 10.5
Shipping Weight (Lbs.) 2.8
-
AIR TOOLS
SUNEX TOOLS 51
3/8" DR. AIR RATCHET WRENCH > 45 ft. lbs. torque
> Provides both performance and value
> Ball detent socket retainer
> 150 rpm for quick run down
> Both ball and needle bearing construction for smooth operation
> Also available: 3/8" Head kit - part # RSRHK100C
SX113
Free Speed (RPM) @ 90PSI 150
Torque (ft.lbs.) @ 90PSI 45
Square Drive (In.) 3/8
Air Inlet (NPT) 1/4
Min. Hose Size (I.D.) 3/8
Recommended Air Pressure (PSI) 90
Average Air Consumption (CFM) 4
Sound Level (dBA) 110
Length (In.) 10.5
Shipping Weight (Lbs.) 2.7
3/8" DR. HEAVY DUTY AIR RATCHET WRENCH > Full 60 ft. lbs. torque
> Comfortable ergonomic grip
> Adjustable button trigger
> Rotary exhaust collar
> Large FWD/REV switch
> Automatic oiler for long life
> Also available: 3/8" Head kit - part # RSRHK114
SX114
Free Speed (RPM) @ 90PSI 200
Torque (ft.lbs.) @ 90PSI 60
Square Drive (In.) 3/8
Air Inlet (NPT) 1/4
Min. Hose Size (I.D.) 3/8
Recommended Air Pressure (PSI) 90
Average Air Consumption (CFM) 4
Sound Level (dBA) 88
Length (In.) 11
Shipping Weight (Lbs.) 2.7
SX116
Max. Free Speed (RPM @90PSI) 200
Max. Torque (ft.lbs. @90PSI) 80
Working Torque (ft.lbs. @90 PSI) 10-65
Air Inlet (NPT) 1/4
Min. Hose Size (I.D.) 3/8"
Avg. Air Consumption (CFM) 4
Recommended Air Pressure (PSI) 90
Sound Level (dBA) 92.5
Length (In.) 10.3
Shipping Weight (Lbs) 2.5
3/8" DR. SUPER DUTY AIR RATCHET > High performance motor delivers 20% more power than
standard ratchets
> Self-lubricating rotor blades
> 360° Adjustable exhaust
> Contoured handle
> CR-MO alloy steel yoke prevents spreading
> Also available: 3/8" Head kit - part # RSRHK638
-
1/2" DR. HEAVY DUTY AIR RATCHET WRENCH> Ideal for high torque fasteners in limited work areas
> With overall length of 14-1/2", this true 1/2" ratchet provides 90 ft. lbs. of torque for increased leverage on tough jobs in tight work areas
> Fast rundown to speed up tightening operations
> Ball and needle bearing construction for long life
> Ball detent socket retainer
> Also available: 1/2" head kit - part # RSRHK109
SX109
Free Speed (RPM) @ 90PSI 150
Torque (ft.lbs.) @ 90PSI 90
Square Drive (In.) 1/2
Air Inlet (NPT) 1/4
Min. Hose Size (I.D.) 3/8
Recommended Air Pressure (PSI) 90
Average Air Consumption (CFM) 5
Sound Level (dBA) 92
Length (In.) 14.5
Shipping Weight (Lbs.) 4.75
AIR TOOLS
52 SUNEX TOOLS
SX111
Square Drive (In.) 3/8
Max. Torque (ft.lbs. @90PSI) 75
Working Torque (ft.lbs.) 30-60
Free Speed (RPM @90PSI) 10,000
Air Inlet (NPT) 1/4
Recommended Air Pressure (PSI) 90
Avg. Air Consumption (CFM) 4
Sound Level (dBA) 110
Length (In.) 6.25
Shipping Weight (Lbs) 2.2
3/8" DR. PALM GRIP IMPACT WRENCH> Ring retainer for positive socket retention
> Compact, lightweight design
> Butterfl y throttle for directional control
> Built-in regulator for speed control
SX821A
Square Drive (In.) 3/8
Max. Torque (ft.lbs. @90PSI) 75
Working Torque (ft.lbs.) 30-60
Free Speed (RPM@90PSI) 10,000
Air Inlet (NPT) 1/4
Recommended Air Pressure (PSI) 90
Average Air Consumption (CFM) 4
Sound Level (dBA) 84
Length (In.) 5
Shipping Weight (Lbs.) 2.8
3/8" DR. PISTOL GRIP IMPACT WRENCH> Ring socket retainer for rapid socket changes
> Front bumper for added protection
> Built-in regulator for added protection
> Reliable dog clutch mechanism for dependable service
-
3/8" DR. HEAVY DUTY IMPACT WRENCH > Most powerful and compact “size to power” ratio in its class
> Bias motor for maximum take off power
> Twin hammer impact mechanism
> Forged steel hammer housing
> Variable speed trigger
> 6-position speed regulator
SX978
Square Drive (In.) 3/8
Max. Torque (ft.lbs. @90PSI) 300
Working Torque (ft.lbs.) 90-260
Free Speed (RPM@90PSI) 12,500
Blows Per Minute: 1,400
Air Inlet (NPT) 1/4
Recommended Air Pressure (PSI) 90
Average Air Consumption (CFM) 4
Sound Level (dBA) 97
Length (In.) 5.7
Shipping Weight (Lbs.) 3.3
AIR TOOLS
SUNEX TOOLS 53
SX634CZ
Square Drive (In.) 1/2
Max. Torque (ft.lbs. @90PSI) 220
Working Torque (ft.lbs.) 50-190
Free Speed (RPM@90PSI) 7,000
Air Inlet (NPT) 1/4
Recommended Air Pressure (PSI) 90
Average Air Consumption (CFM) 4
Sound Level (dBA) 103
Length (In.) 7
Shipping Weight (Lbs.) 5.5
1/2" DR. HEAVY DUTY IMPACT WRENCH > High-powered pin clutch delivers over 450 ft. lbs. of
maximum torque
> Working torque range 25-350 ft. lbs.
> Rear knob regulator and variable speed trigger allow precise speed control
> Cushion grip design for comfort and control
SX959A
Square Drive (In.) 1/2
Max. Torque (ft.lbs. @90PSI) 450
Working Torque (ft.lbs.) 25-350
Free Speed (RPM@90PSI) 7,000
Air Inlet (NPT) 1/4
Recommended Air Pressure (PSI) 90
Average Air Consumption (CFM) 4
Sound Level (dBA) 103
Length (In.) 7.4
Shipping Weight (Lbs.) 5.75
1/2" DR. IMPACT WRENCH > Rocking dog clutch mechanism
> Built-in regulator for positive speed control
> Balanced design for ease of handling
> Protective PVC rubber cover
> Our most economical 1/2" impact wrench
-
SX959A-2
Square Drive (In.) 1/2
Max. Torque (ft.lbs. @90PSI) 430
Working Torque (ft.lbs.) 25-330
Free Speed (RPM@90PSI) 7,000
Air Inlet (NPT) 1/4
Recommended Air Pressure (PSI) 90
Average Air Consumption (CFM) 4
Sound Level (dBA) 103
Length (In.) 9.5
Shipping Weight (Lbs.) 5.95
1/2" DR.HEAVY DUTY IMPACT WRENCHWITH 2" EXTENDED ANVIL> High-powered pin clutch delivers over 430 ft. lbs. of
maximum torque
> Working torque range 25-330 ft. lbs.
> Rear knob regulator and variable speed trigger allow precise speed control
> Cushion grip design for comfort and control
AIR TOOLS
54 SUNEX TOOLS
SX855A
Square Drive (In.) 3/4
Max. Torque (ft.lbs. @90PSI) 1,200
Working Torque (ft.lbs.) 100-800
Free Speed (RPM@90PSI)) 4,500
Air Inlet (NPT) 3/8
Recommended Air Pressure (PSI) 90
Average Air Consumption (CFM) 6
Sound Level (dBA) 92
Length (In.) 10
Shipping Weight (Lbs.) 12.5
SX670A
Square Drive (In.) 3/4
Max. Torque (ft.lbs. @90PSI) 740
Working Torque (ft.lbs.) 400-600
Free Speed (RPM@90PSI) 4,500
Air Inlet (NPT) 1/4
Recommended Air Pressure (PSI) 90
Average Air Consumption (CFM) 6.4
Sound Level (dBA) 90
Length (In.) 9.6
Shipping Weight (Lbs.) 10.4
3/4" DR.IMPACT WRENCH> Protective nose cap and rear bumper ring> Slide bar forward and reverse> Ring socket retainer for rapid socket changes> Built-in regulator for positive speed> Pin clutch mechanism delivers 700 ft.lbs. of torque> Balanced pistol grip design
3/4" DR.SUPER DUTY IMPACT WRENCH> One of the most powerful, full featured super duty 3/4" impact
wrenches in its class
> Pin clutch develops 1,200 ft. lbs. of ultimate torque
> Internally molded comfort grip handle for safer, more controlled handling
> Patented Miracle X muffl er provides up to 10% sound reduction with no loss in power
> Rear handle regulator and variable speed trigger allow precise speed control
-
AIR TOOLS
SUNEX TOOLS 55
SX998-6A
Square Drive (In.) 1
Max. Torque (ft.lbs. @90PSI) 1,500
Working Torque (ft.lbs.) 150-1,200
Free Speed (RPM@90PSI)) 3,800
Air Inlet (NPT) 1/2
Recommended Air Pressure (PSI) 90
Average Air Consumption (CFM) 9
Sound Level (dBA) 97
Length (In.) 19.5
Shipping Weight (Lbs.) 18.5
1" DR. MINI SUPER DUTY IMPACT WRENCH WITH 6" EXTENDED ANVIL > One of the lightest, yet most powerful super duty, 1" extended anvil impact wrenches in its class– ultimate torque of 1,500 ft. lbs. at 90 psi
> Weighs just 18-1/2 lbs., yet packs all the power you will ever need
> Designed for extended use in professional truck tire service work
> Bottom handle regulator and variable speed trigger allow precise speed control
> Auxiliary side handle for ease of control
SX505A-8
Square Drive (In.) 1
Max. Torque (ft.lbs. @90PSI) 1,460
Working Torque (ft.lbs.) 600-1200
Free Speed (RPM@90PSI)) 4,000
Air Inlet (NPT) 1/2
Recommended Air Pressure (PSI) 115
Average Air Consumption (CFM) 13.4
Sound Level (dBA) 87
Length (In.) 21.7
Shipping Weight (Lbs.) 30.9
1" DR. HEAVY DUTY IMPACT WRENCH WITH 8" EXTENDED ANVIL > Heavy duty dog clutch for reliable service and long life
> Max. torque 1,460 ft. lbs at 90 psi
> Supported ring socket retainer
> Auxiliary side handle for control
> Easy access reverse lever
> Ideal wrench for heavy duty truck tire service work
> 6-position power regulator
SX223
Free Speed (RPM) @ 90PSI 1,800
Maximum Capacity (In.) 3/8
Air Inlet (NPT) 1/4
Min. Hose Size (I.D.) 3/8
Recommended Air Pressure (PSI) 90
Average Air Consumption (CFM) 4
Sound Level (dBA) 83.3
Length (In.) 7.6
Shipping Weight (Lbs.) 2.42
3/8" DR. REVERSIBLE AIR DRILL WITH CHUCK > Provides both high performance and value
> One fi nger forward/reverse lever
> Triple planetary gearing for heavy duty use
> Muffl ed handle exhaust for quiet operation
> 3/8" Jacobs® chuck and key included
> Also available individually: 3/8" Jacobs® chuck with key - part # RS87106
-
SX228A
Free Speed (RPM) @ 90PSI 2,600
Maximum Capacity (In.) 3/8
Air Inlet (NPT) 1/4
Min. Hose Size (I.D.) 3/8
Recommended Air Pressure (PSI) 90
Average Air Consumption (CFM) 4
Sound Level (dBA) 83
Length (In.) 7.5
Shipping Weight (Lbs.) 2.4
3/8" DR.AIR DRILL WITH CHUCK> Planetary gearing for heavy duty use
> Muffl ed handle exhaust for quiet operation
> Positive action trigger for speed control
> 3/8" Jacobs® chuck and key included
> Also available individually: 3/8" Jacobs® chuck with key - part # RS87106
AIR TOOLS
56 SUNEX TOOLS
SX495
Free Speed (RPM) @ 90PSI 1,800
Maximum Capacity (In.) 3/8
Air Inlet (NPT) 1/4
Min. Hose Size (I.D.) 3/8
Recommended Air Pressure (PSI) 90
Average Air Consumption (CFM) 4
Sound Level (dBA) 94
Length (In.) 7
Shipping Weight (Lbs.) 2.5
3/8" DR.HEAVY DUTY REVERSIBLE AIR DRILL WITH KEYLESS CHUCK> Heavy duty gearing for high performance jobs
> Muffl ed handle exhaust for extra quiet operation
> Reversible for added versatility
> 3/8" Jacobs® keyless chuck included
> Also available individually: 3/8" Jacobs® keyless chuck - part # RS79535
3/8" DR.REVERSIBLE AIR DRILL WITH CHUCK> Reversible for added versatility
> Positive action trigger for speed control
> Planetary gearing for heavy duty use
> Muffl ed handle exhaust for quiet operation
> 3/8" Jacobs® chuck and key included
> Also available individually, 3/8" Jacobs® chuck with key - part # RS87106
SX225B
Free Speed (RPM) @ 90PSI 1,800
Maximum Capacity (In.) 3/8
Air Inlet (NPT) 1/4
Min. Hose Size (I.D.) 3/8
Recommended Air Pressure (PSI) 90
Average Air Consumption (CFM) 4
Sound Level dBA) 85
Length (In.) 7.5
Shipping Weight (Lbs.) 2.75
-
AIR TOOLS
SUNEX TOOLS 57
SX545B
Free Speed (RPM) @ 90PSI 1,600
Maximum Capacity (In.) 3/8
Air Inlet (NPT) 1/4
Min. Hose Size (I.D.) 3/8
Recommended Air Pressure (PSI) 90
Average Air Consumption (CFM) 4
Sound Level (dBA) 94
Length (In.) 8
Shipping Weight (Lbs.) 2.75
3/8" DR. REVERSIBLE RIGHT ANGLE AIR DRILL WITH CHUCK > Reversible for added versatility
> 90° angle design for use in restricted areas
> Variable speed lever throttle
> Ribbed handle for positive grip
> Ball bearing construction for long life
> 3/8" Jacobs® chuck and key included
> Also available individually: 3/8" Jacobs® chuck with key - part # RS87106
1/2" DR. REVERSIBLE AIR DRILL WITH CHUCK > Planetary gearing for heavy duty use
> Reversible for added versatility
> Positive action trigger for speed control
> Heavy duty side handle for added control
> Muffl ed handle exhaust for quiet operation
> 1/2" Jacobs® chuck and key included
> Also available individually: 1/2" Jacobs® chuck with key - part # RS87109
1/2" DR. HEAVY DUTY REVERSIBLE AIR DRILL WITH KEYLESS CHUCK > Heavy duty gearing for high performance jobs
> Muffl ed handle exhaust for extra quiet operation
> Heavy duty side handle for added control
> Reversible for added versatility
> 1/2" Jacobs® keyless chuck included
> Also available individually: 1/2" Jacobs® keyless chuck - part # RS79437N
SX221B
Free Speed (RPM) @ 90PSI 500
Maximum Capacity (In.) 1/2
Air Inlet (NPT) 1/4
Min. Hose Size (I.D.) 3/8
Recommended Air Pressure (PSI) 90
Average Air Consumption (CFM) 4
Sound Level (dBA) 89
Length (In.) 9.25
Shipping Weight (Lbs.) 4.5
SX494
Free Speed (RPM) @ 90PSI 700
Maximum Capacity (In.) 1/2
Air Inlet (NPT) 1/4
Min. Hose Size (I.D.) 3/8
Recommended Air Pressure (PSI) 90
Average Air Consumption (CFM) 4
Sound Level (dBA) 92
Length (In.) 7.5
Shipping Weight (Lbs.) 4.5
-
AIR TOOLS
58 SUNEX TOOLS
SX265B
Free Speed (RPM) 16,000
Air Inlet (NPT) 1/4
Min. Hose Size (I.D.) 3/8
Recommended Air Pressure (PSI) 90
Average Air Consumption (CFM) 5
Sound Level (dBA) 102
Pad Size (In.) 5.5
Height (In.) 2
Length (In.) 8.25
Shipping Weight (Lbs.) 2.6
5" HIGH SPEED SANDER> Built-in regulator for positive speed control
> Compact, lightweight for ease of handling
> Contoured trigger housing for extra control
> Includes 3 backing pads: 3", 4-1/2" & 5-1/2"
> Also available in set: 3", 4-1/2" & 5-1/2" backing pads - part # RS265B31
SX203N
Free Speed (RPM) 10,000
Air Inlet (NPT) 1/4
Min. Hose Size (I.D.) 3/8
Recommended Air Pressure (PSI) 90
Average Air Consumption (CFM) 4
Sound Level (dBA) 91
Pad Size (In.) 6
Height (In.) 5.15
Length (In.) 10
Shipping Weight (Lbs.) 4.5
6" QUIET DUAL ACTION SANDER> Motor insulated housing allows quiet operation
> Built-in regulator for positive speed control
> Ball bearing construction for vibration-free performance
> Variable speed lever throttle
> 6" pad standard
> Also available individually: 5" pad - part # RS87511; 6" pad - part # RS87513
SX294-6
Free Speed (RPM) 10,000
Air Inlet (NPT) 1/4
Min. Hose Size (I.D.) 3/8
Recommended Air Pressure (PSI) 90
Average Air Consumption (CFM) 4
Sound Level (dBA) 86
Pad Size (In.) 6
Height (In.) 5
Length (In.) 10
Shipping Weight (Lbs.) 5
6" HEAVY DUTY DUAL ACTION SANDER> Positive grip handle
> Built-in regulator for positive speed control
> Ball bearing construction for long life
> Balanced counterweight design provides orbital or rotary action
> Automatic release lever throttle
> 6" pad standard
> Also available individually, 5" pad - part # RS87511;6" pad - part # RS87513
-
AIR TOOLS
SUNEX TOOLS 59
SX288C
Free Speed (RPM) 2,500
Air Inlet (NPT) 1/4
Min. Hose Size (I.D.) 3/8
Recommended Air Pressure (PSI) 90
Average Air Consumption (CFM) 8
Sound Level (dBA) 93
Pad Size (In.) 16 x 2.5
Height (In.) 6.15
Length (In.) 16
Shipping Weight (Lbs.) 7
DUAL PISTON STRAIGHT LINE SANDER > Balanced design provides vibration free performance
> Automatic release trigger for positive stop action
> Twin piston design provides stall-free performance
> 100% needle bearing construction for longer life
> Quick action paper clamps
> 2,500 reciprocating strokes per minute to ensure fast, effective performance
> Also available: pad assembly - part # RS28635A
SX296C
Free Speed (RPM) 8,000
Air Inlet (NPT) 1/4
Min. Hose Size (I.D.) 3/8
Recommended Air Pressure (PSI) 90
Average Air Consumption (CFM) 5
Sound Level (dBA) 84
Pad Size (In.) 3.5 x 7.75
Height (In.) 5
Length (In.) 8
Shipping Weight (Lbs.) 4.4
ORBITAL JITTERBUG SANDER > Muffl ed rear exhaust for quiet operation
> Four post motor housing support
> Automatic release lever throttle
> H.D. positive locking clamps for positive paper retention
> Ball bearing construction for long life
> Built-in regulator for positive speed control
> Also available individually: sanding pad - part # RS296C44
SX214A
Free Speed (RPM) 4,500
Air Inlet (NPT) 1/4
Min. Hose Size (I.D.) 3/8
Recommended Air Pressure (PSI) 90
Average Air Consumption (CFM) 5
Sound Level (dBA) 97
Pad Size (In.) 7
Height (In.) 3.75
Length (In.) 16
Shipping Weight (Lbs.) 5
HORIZONTAL AIR SANDER > Ball bearing construction provides
vibration free performance
> Muffl ed exhaust for quiet operation
> Positive grip handle for complete control
> Dead handle mounts for right or left hand operation
> Lever throttle for positive speed control
> Built-in regulator
> 7" backing pad included
> Also available individually: 7" backing pad - part # RS21440; pad nut - part # RS21441
-
AIR TOOLS
60 SUNEX TOOLS
SX215A
Free Speed (RPM) @ 90PSI 2,500
Air Inlet (NPT) 1/4
Min. Hose Size (I.D.) 3/8
Recommended Air Pressure (PSI) 90
Average Air Consumption (CFM) 9
Sound Level (dBA) 95
Pad Size (In.) 7
Height (In.) 3.75
Length (In.) 12.25
Shipping Weight (Lbs.) 6
7" HORIZONTAL AIR POLISHER> Speed controlled for polishing applications
> Lever throttle for positive speed control
> Dead handle mounts for right or left hand operation
> Built-in regulator
> Ball bearing construction provides vibration-free performance
> Muffl ed exhaust for quiet operation
> 7" backing pad included
> Also available individually: 7" backing pad - part # RS21440;
Pad nut - part # RS21441
SX210Model 0000
Free Speed (RPM) @ 90PSI 11,000
Air Inlet (NPT) 1/4
Min. Hose Size (I.D.) 3/8
Recommended Air Pressure (PSI) 90
Average Air Consumption (CFM) 5
Sound Level (dBA) 85
Pad Size (In.) 4
Height (In.) 3.5
Length (In.) 8
Shipping Weight (Lbs.) 4
4" MINI ANGLE GRINDER> Lots of power in compact size
> Lightweight design for ease of operation
> Grinder head guard standard
> Auxiliary side handle for greater operator control
> New mini size is great when working in tight areas
> Also available: disc wheel - part # RS21134
SX211A
Free Speed (RPM) @ 90PSI 11,000
Air Inlet (NPT) 1/4
Min. Hose Size (I.D.) 3/8
Recommended Air Pressure (PSI) 90
Average Air Consumption (CFM) 6
Sound Level (dBA) 86
Pad Size (In.) 4
Height (In.) 3.5
Length (In.) 9.5
Shipping Weight (Lbs.) 4
4" HEAVY DUTY ANGLE GRINDER> High torque motor for heavy duty performance
> Safety lever throttle
> Grinder head guard standard
> Compact design for ease of handling
> Auxiliary side handle for greater operator control
> Grinding wheel standard
> Also available individually: disc wheel - part # RS21134
-
SX230B
Free Speed (RPM) @ 90PSI 22,000
Collet Size (In.) 1/4
Air Inlet (NPT) 1/4
Min. Hose Size (I.D.) 3/8
Recommended Air Pressure (PSI) 90
Average Air Consumption (CFM) 4
Sound Level (dBA) 93
Length (In.) 7
Shipping Weight (Lbs.) 1.25
1/4" DR. AIR DIE GRINDER > Rear exhaust directs air away from work
> Built-in regulator
> Safety lever throttle for positive speed control
> Ball bearing construction for long life
AIR TOOLS
SUNEX TOOLS 61
SX231B
Free Speed (RPM) @ 90PSI 25,000
Collet Size (In.) 1/4
Air Inlet (NPT) 1/4
Min. Hose Size (I.D.) 3/8
Recommended Air Pressure (PSI) 90
Average Air Consumption (CFM) 4
Sound Level (dBA) 94.5
Length (In.) 4.92
Shipping Weight (Lbs.) 0.72
1/4" DR. MINI AIR DIE GRINDER > Front exhaust keeps grinding surface clean for visibility
> Built-in air inlet allows for greater access in restricted areas
> Safety lever throttle for positive speed control
> Built-in speed regulator
> Ball bearing construction for long tool life
SX245K
Free Speed (RPM) @ 90PSI 54,000
Collet Size (In.) 1/8
Air Inlet (NPT) 1/4
Min. Hose Size (I.D.) 3/16
Recommended Air Pressure (PSI) 90
Average Air Consumption (CFM) 5.3
Sound Level (dBA) 72
Length (In.) 5.25
Shipping Weight (Lbs.) 2
PENCIL DIE GRINDER SET > Incudes: 1 SX245 - 54,000 RPM Pencil Die Grinder
10 - 1/8" Shank stones
2 - 9mm Wrenches
1 - 1/4" Coupler
1 Air tool oil bottle
1 Oiler
> Convenient blow mold storage case
> Built in regulator
-
SX240B
Free Speed (RPM) @ 90PSI 20,000
Collet Size (In.) 1/4
Air Inlet (NPT) 1/4
Min. Hose Size (I.D.) 3/8
Recommended Air Pressure (PSI) 90
Average Air Consumption (CFM) 4
Sound Level (dBA) 87.2
Length (In.) 11.14
Shipping Weight (Lbs.) 1.43
1/4" DR. EXTENDED DIE GRINDER> Ideal for work in deep crevices
> Lever throttle for positive speed control
> Rear exhaust minimizes chip fl y back
> Ball bearing construction for long tool life
AIR TOOLS
62 SUNEX TOOLS
SX264
Free Speed (RPM) @ 90PSI 20,000
Collet Size (In.) 1/4
Air Inlet (NPT) 1/4
Min. Hose Size (I.D.) 3/8
Recommended Air Pressure (PSI) 90
Average Air Consumption (CFM) 44
Sound Level (dBA) 93.2
Length (In.) 5.5
Shipping Weight (Lbs.) 1.03
1/4" DR. MINI RIGHT ANGLE DIE GRINDER> Built-in speed regulator
> Safety throttle lever for positive speed control
> Ball bearing construction for long tool life
SX264KModel 0000
Free Speed (RPM) @ 90PSI 20,000
Collet Size (In.) 1/4
Air Inlet (NPT) 1/4
Min. Hose Size (I.D.) 3/8
Recommended Air Pressure (PSI) 90
Average Air Consumption (CFM) 44
Sound Level (dBA) 93.2
Length (In.) 5.5
Shipping Weight (Lbs.) 3
1/4" DR. MINI RIGHT ANGLE DIE GRINDER KIT> Built-in speed regulator
> Safety throttle lever for positive speed control
> Ball bearing construction for long tool life
> Includes:
1 pc. SX264 Mini Right Angle Die Grinder
2 spanner wrenches
1/8" (3mm) collet
5 pc. 1/8" (3mm) shank grinding stones
5 pc. 1/4" (6mm) shank grinding stones
1 each: 2" & 3" backing pad
4 each: 2" & 3" abrasive discs
2 screw posts
Blow mold case
-
AIR TOOLS
SUNEX TOOLS 63
SX232B
Free Speed (RPM) @ 90PSI 20,000
Collet Size (In.) 1/4
Air Inlet (NPT) 1/4
Min. Hose Size (I.D.) 3/8
Recommended Air Pressure (PSI) 90
Average Air Consumption (CFM) 4
Sound Level (dBA) 93.6
Length (In.) 6.2
Shipping Weight (Lbs.) 1.11
1/4" DR. ANGLE DIE GRINDER > 90° angle head for restricted areas
> Built-in regulator
> Safety lever throttle for positive speed control
> Rear exhaust directs air away from work
> Ball bearing construction
SX235KTB
Blows Per Minute 4,500
Bore (In.) 11/16
Stroke (In.) 1-5/8
Air Inlet (NPT) 1/4
Min. Hose Size (I.D.) 3/8
Recommended Air Pressure (PSI) 90
Average Air Consumption (CFM) 4
Sound Level (dBA) 105
Length (In.) 5.5
Shipping Weight (Lbs.) 3.6
SHORT AIR HAMMER > Built-in regulator
> Accepts .401" Parker taper shank chisels
> Ideal for standard duty applications
> 3 pc. chisel set included
> Quick change retainer spring
> Also available individually: quick change retainer spring - part # RS87301
SX275B
Blows Per Minute 3,000
Bore (In.) 11/16
Stroke (In.) 2-5/8
Air Inlet (NPT) 1/4
Min. Hose Size (I.D.) 3/8
Recommended Air Pressure (PSI) 90
Average Air Consumption (CFM) 4
Sound Level (dBA) 105
Length (In.) 6.75
Shipping Weight (Lbs.) 3.5
MEDIUM DUTY AIR HAMMER > Built-in regulator
> Accepts .401" Parker taper shank chisels
> An excellent general purpose hammer
> Quick change retainer spring
> Also available individually, quick change retainer spring - part # RS87301
-
AIR TOOLS
64 SUNEX TOOLS
SX241B
Blows Per Minute 2,000
Bore (In.) 11/16
Stroke (In.) 3-5/8
Air Inlet (NPT) 1/4
Min. Hose Size (I.D.) 3/8
Recommended Air Pressure (PSI) 90
Average Air Consumption (CFM) 4
Sound Level (dBA) 91
Length (In.) 9
Shipping Weight (Lbs.) 4.2
LONG BARREL AIR HAMMER> Built-in regulator
> Accepts .401" Parker taper shank chisels
> Aluminum housing with hardened steel barrel
> Longer stroke piston to handle those tough cutting jobs
> Great for front end jobs
> Quick change retainer spring
> Also available individually: quick change retainer spring - part # RS87301
SX243
Blows Per Minute 2,200
Bore (In.) 3/4
Stroke (In.) 3-3/4
Air Inlet (NPT) 1/4
Min. Hose Size (I.D) 3/8
Recommended Air Pressure (PSI) 90
Average Air Consumption (CFM) 4
Sound Level (dBA) 110
Length (In.) 10.63
Shipping Weight (Lbs.) 5.7
HEAVY DUTY LONG BARREL AIR HAMMER> Long barrel design with 2,200 BPM
> Aluminum alloy housing with ergonomic comfort grip
> Hardened steel barrel for maximum durability
> Built-in regulator knob for easy adjustment
> Quick change chisel retainer included- also available individually: part # RS248025
PISTOL GRIP NEEDLE SCALER> Perfect for surface prep work involving the removal of rust,
paint, weld slag, etc.
> Lightweight aluminum housing
> Hardened steel barrel
> Pistol design for comfort and control
> Also available individually:
replacement needles # RS24623 (tool requires 19)
SX246
Needle Quantity 19
Needle Diameter (mm) 3
Blows Per Minute 3,000
Stroke (In.) 1-5/8
Air Inlet (NPT) 1/4
Min. Hose Size (I.D.) 3/8
Recommended Air Pressure (PSI) 90
Average Air Consumption (CFM) 10
Sound Level (dBA) 97
Length (In.) 11
Shipping Weight (Lbs.) 5.7
-
AIR TOOLS
SUNEX TOOLS 65
SX247
Needle Quantity 19
Needle Diameter (mm) 3.2
Blows Per Minute 4,50