Catalog, Allgon - Swedcom

75
T A B L E O F C O N T E N T S T A B L E O F C O N T E N T S Table of Contents Page 3 What’s Inside Allgon 1900 MHz Panel Antennas (M) Overview Page 4 Quick Reference Guide Page 5 30 Degree Beamwidth Page 6 65 Degree Beamwidth Page 7 90 Degree Beamwidth Page 9 105 Degree Beamwidth Page 12 Allgon Dual Polarized Antennas (XM,XU, ALX) Overview Page 13 Quick Reference Guide Page 14 65 Degree Beamwidth 1900 MHz Dual Polarized Page 15 90 Degree Beamwidth 1900 MHz Dual Polarized Page 16 65 Degree Beamwidth 850 MHz Dual Polarized Page 18 800 MHz Allgon Log Periodic (A) Overview Page 21 Quick Reference Guide Page 22 40 Degree Beamwidth Page 23 60 Degree Beamwidth Page 24 85 Degree Beamwidth Page 25 95 Degree Beamwidth Page 27 110 Degree Beamwidth Page 29 Allgon 800 MHz Panel Antennas (CI) Overview Page 30 Quick Reference Guide Page 31 60 Degree Beamwidth Page 32 90 Degree Beamwidth Page 35 105 Degree Beamwidth Page 38 120 Degree Beamwidth Page 41 Allgon 800 MHz Adjustable Electrical Downtilt Panel Antennas (CI-A) Overview Page 44 Quick Reference Guide Page 45 60 Degree Beamwidth Page 46 90 Degree Beamwidth Page 46 105 Degree Beamwidth Page 47 120 Degree Beamwidth Page 47 Allgon 800 MHz “Slim Panel” Antennas (U) Overview Page 48 Quick Reference Guide Page 49 65 Degree Beamwidth Page 50 90 Degree Beamwidth Page 52 Allgon Onmidirectional Antennas (O) Overview Page 54 Quick Reference Guide Page 55 800 MHz Omni Page 56 900 MHz Omni Page 56 900 MHz Electrical Downtilt Inverted Mount Page 56 900 MHz Walking Electrical Downtilt Page 57 Allgon Indoor Antennas (CO, ALIC) Overview Page 58 Quick Reference Guide Page 59 850 MHz Panel Antenna Page 60 1900 MHz Panel Antenna Page 60 Multi-Band Indoor Omni Page 60 Allgon Dual Band Solution (ALVC) Overview Page 61 Quick Reference Guide Page 62 70 Degree Beamwidth Page 63 80 Degree Beamwidth Page 64 90 Degree Beamwidth Page 65 800/1900 MHz Dual Band Filter Page 66 Mounting Brackets Page 67 Testing Procedures Page 68 Tower Top Amplifier Overview Page 69 Quick Reference Guide Page 70 Tower Top Amplifiers Page 71 We also have a wide range of 900 and 1800 MHz antennas. For more information, see our website at www.allgon.com. Digital pattern information for 800 and 1900 MHz antennas can be obtained from www.us.allgon.com.

description

Catalog, Allgon - Swedcom

Transcript of Catalog, Allgon - Swedcom

Page 1: Catalog, Allgon - Swedcom

TA

BL

E

OF

C

ON

TE

NT

ST A B L E O F C O N T E N T S

T a b l e o f C o n t e n t s P a g e 3

What’s Inside

Allgon 1900 MHz Panel Antennas (M)Overview Page 4Quick Reference Guide Page 530 Degree Beamwidth Page 665 Degree Beamwidth Page 790 Degree Beamwidth Page 9105 Degree Beamwidth Page 12

Allgon Dual Polarized Antennas (XM,XU,ALX)Overview Page 13Quick Reference Guide Page 1465 Degree Beamwidth 1900 MHz Dual Polarized Page 1590 Degree Beamwidth 1900 MHz Dual Polarized Page 1665 Degree Beamwidth 850 MHz Dual Polarized Page 18

800 MHz Allgon Log Periodic (A)Overview Page 21Quick Reference Guide Page 2240 Degree Beamwidth Page 2360 Degree Beamwidth Page 2485 Degree Beamwidth Page 2595 Degree Beamwidth Page 27110 Degree Beamwidth Page 29

Allgon 800 MHz Panel Antennas (CI)Overview Page 30Quick Reference Guide Page 3160 Degree Beamwidth Page 3290 Degree Beamwidth Page 35105 Degree Beamwidth Page 38120 Degree Beamwidth Page 41

Allgon 800 MHz Adjustable ElectricalDowntilt Panel Antennas (CI-A)Overview Page 44Quick Reference Guide Page 4560 Degree Beamwidth Page 4690 Degree Beamwidth Page 46105 Degree Beamwidth Page 47120 Degree Beamwidth Page 47

Allgon 800 MHz “Slim Panel” Antennas (U)Overview Page 48Quick Reference Guide Page 4965 Degree Beamwidth Page 5090 Degree Beamwidth Page 52

Allgon Onmidirectional Antennas (O)Overview Page 54Quick Reference Guide Page 55800 MHz Omni Page 56900 MHz Omni Page 56900 MHz Electrical Downtilt Inverted Mount Page 56900 MHz Walking Electrical Downtilt Page 57

Allgon Indoor Antennas (CO, ALIC)Overview Page 58Quick Reference Guide Page 59850 MHz Panel Antenna Page 601900 MHz Panel Antenna Page 60Multi-Band Indoor Omni Page 60

Allgon Dual Band Solution (ALVC)Overview Page 61Quick Reference Guide Page 6270 Degree Beamwidth Page 6380 Degree Beamwidth Page 6490 Degree Beamwidth Page 65800/1900 MHz Dual Band Filter Page 66

Mounting Brackets Page 67Testing Procedures Page 68

Tower Top AmplifierOverview Page 69Quick Reference Guide Page 70Tower Top Amplifiers Page 71

We also have a wide range of 900 and 1800 MHzantennas. For more information, see our websiteat www.allgon.com.

Digital pattern information for 800 and 1900 MHzantennas can be obtained fromwww.us.allgon.com.

Page 2: Catalog, Allgon - Swedcom

190

0 M

Hz P

an

el A

nte

nn

a1 9 0 0 M H z P a n e l A n t e n n a

Features

• High pattern stability over entire frequency band• 100% IM testing• Superior vertical pattern shaping for interference

reduction• 100% verified for vertical pattern performance• Mechanical design allows for thermal expansion• Aesthetically pleasing

Design Philosophy

Quality Materials

Our Metro panel antenna is designed andmanufactured by a repeatable procedure, whichallows the product to pass stringent electricaltesting in production in its “as built” configuration.The 1900 MHz panel antenna has a robust me-chanical design, which does not rely on the radomefor support. The radome, which is only used forweatherproofing, is set inside the endcaps andallows for thermal expansion.

Proper use of materials and their structure ensuresperformance integrity. In antennas the electrical per-formance is directly related to mechanical performance.The choice of radome material is crucial since it actsas a window between the radiating elements and thecoverage area. Our UV stabilized PVC radome isresistant to moisture absorption. Furthermore, ourradomes can withstand mechanical stresses, even atlow temperatures and long exposure to UV radiation.For corrosion inhibition, we use aircraft quality alumi-num alloy that is inherently resistant to corrosioncaused by the environment.

The Allgon 1900 MHz panel antennas haveverified vertical pattern performance on 100% ofthe antennas. Given the narrow mechanicalwidth and depth of the product, the offerings areunmatched in Front-to-Back Ratio for all openingangles. The 1900 MHz panel antenna hasconsistent reliable performance from frequencyto frequency and product to product.

Performance

Bracket hardware for the 1900 MHz panel antennais made of only the highest quality aircraftaluminum and galvanized stainless steel, and isavailable in non-tilt and mechanical tilt for mountingto a pipe. The 1900 MHz panel antenna can also beflush mounted with tilt or panning. For more infor-mation, please see page 67.

Brackets

B a s e S t a t i o n A n t e n n a s P a g e 4

Allgon prides itself on stringent testing require-ments with conservative, yet realistic claims ofthe performance of our product offering. Formore information on testing procedures, seepage 68. Our front-to-back ratios are specifiedfor ±20° from 180° (worst case) to 0°.

Testing

Upper & Lower Placement7/16 DIN Connector

Connectors

Page 3: Catalog, Allgon - Swedcom

B a s e S t a t i o n A n t e n n a s P a g e 5

190

0 M

Hz

Pa

ne

l A

nte

nn

aQ U I C K R E F E R E N C E G U I D E

All antennas

are designed

for 0° to 14°

electrical

downtilt.

90 Degree 1900 MHz Panel

Gain Part Number Description Page9.5 dBd

11.5 dBd

13.5 dBd

14.5 dBd

14 dBd

16 dBd

7204.15 M-1900-90-11.5i-0-D 9

7194.15 M-1900-90-13.5i-0-D 107194.07 M-1900-90-13.5i-2-D 107194.03 M-1900-90-13.5i-4-D 107194.12 M-1900-90-13.5i-10-D 10

7198.15 M-1900-90-15.5i-0-D 107198.14 M-1900-90-15.5i-2-D 107198.10 M-1900-90-15.5i-4-D 10

7184.15 M-1900-90-16.5i-0-D 117184.18 M-1900-90-16.5i-0-D-U 117184.14 M-1900-90-16.5i-2-D 117184.17 M-1900-90-16.5i-2-D-U 117184.20 M-1900-90-16.5i-3-D 117184.13 M-1900-90-16.5i-4-D 117184.07 M-1900-90-16.5i-6-D 11

7184.08 M-1900-90-16i-8-D 11

7200.05 M-1900-90-18i-0-D 117200.01 M-1900-90-18i-2-D 117200.02 M-1900-90-18i-2-D-U 117200.09 M-1900-90-18i-3-D 117200.07 M-1900-90-18i-4-D 117200.14 M-1900-90-18i-4-D-U 117200.10 M-1900-90-18i-5-D 117200.08 M-1900-90-18i-6-D 11

7200.06 M-1900-90-17.5i-10-D 11

7199.02 M-1900-90-19.5i-0-D 127199.01 M-1900-90-19.5i-2-D 12

65 Degree 1900 MHz Panel

Gain Part Number Description Page10.5 dBd

13 dBd

15 dBd

16 dBd

15.5 dBd

7205.15 M-1900-65-12.5i-0-D 7

7195.15 M-1900-65-15i-0-D 77195.03 M-1900-65-15i-4-D 77195.07 M-1900-65-15i-10-D 77195.18 M-1900-65-15i-12-D 7

7183.15 M-1900-65-17i-0-D 87183.14 M-1900-65-17i-2-D 87183.08 M-1900-65-17i-2-D-U 87183.18 M-1900-65-17i-3-D 87183.12 M-1900-65-17i-4-D 87183.16 M-1900-65-17i-6-D 87183.17 M-1900-65-17i-8-D 8

7182.15 M-1900-65-18i-0-D 87182.14 M-1900-65-18i-2-D 87182.12 M-1900-65-18i-3-D 87182.13 M-1900-65-18i-4-D 87182.16 M-1900-65-18i-4-D-U 87182.23 M-1900-65-18i-5-D 87182.25 M-1900-65-18i-6-D 87182.20 M-1900-65-18i-8-D 8

7182.21 M-1900-65-17.5i-10-D 87182.24 M-1900-65-17.5i-14-D 8

7220.08 M-1900-65-20i-0-D 97220.17 M-1900-65-20i-0-D-U 97220.14 M-1900-65-20i-2-D 97220.15 M-1900-65-20i-2-D-U 97220.10 M-1900-65-20i-4-D 97220.11 M-1900-65-20i-5-D 97220.13 M-1900-65-20i-7-D 9

7220.16 M-1900-65-19.5i-10-D 9

30 Degree 1900 MHz Panel

Gain Part Number Description Page

18 dBd

21 dBd

7185.08 M-1900-30-20i-0-D 67185.03 M-1900-30-20i-2-D 67185.04 M-1900-30-20i-2-D-U 67185.07 M-1900-30-20i-4-D 6

7221.14 M-1900-30-23i-1-D 67221.17 M-1900-30-23i-1-D-U 67221.15 M-1900-30-23i-2-D 67221.16 M-1900-30-23i-4-D 67221.13 M-1900-30-23i-7-D 6

105 Degree 1900 MHz Panel

Gain Part Number Description Page

14 dBd7208.06 M-1900-105-16i-0-D 127208.01 M-1900-105-16i-2-D 127208.05 M-1900-105-16i-6-D 12

18 dBd

17.5 dBd

15.5 dBd

17.5 dBd

1900 MHzMetroPanel

Antenna

M - 1 9 0 0 - 9 0 - 1 8 i - 0 - D7/16 DINConnector

Description Detail:

MetroFamily

FrequencyBand

HorizontalBeamwidth

Electrical DowntiltAngleGain

in dBi

A trailing U indicates connector placement on the top, no U indicates connector placement on the bottom.

Antennas may be ordered using part number or description.

Page 4: Catalog, Allgon - Swedcom

M-1900-30-20i

Electrical Specifications 7185 7221(M-1900-30-20i) (M-1900-30-23i)

B a s e S t a t i o n A n t e n n a s P a g e 6

1 9 0 0 M H z P a n e l A n t e n n a

Gain 18 dBd (20 dBi) 21 dBd (23 dBi)Polarization linear, vertical linear, verticalVSWR, 50Ω <1.3:1 (1850 MHz to 1990 MHz) <1.3:1 (1850 MHz to 1990 MHz)

Horizontal 3dB beamwidth 30° 30°Vertical 3dB beamwidth 8.5° 5°Custom electrical downtilts 0°, 2°, & 4° 1°, 2°, 4°, & 7°

40 degree cone Front-to-back ratio >30 dB >30 dBSuppression of first upper side lobe >14 dB >20 dBFirst lower null fill >-23 dB >-21 dB

Maximum CW input power 200W 400WTwo tone intermodulation 3rd order <-103 dBm for 2x10W <-103 dBm for 2x10W

(143 dBc at 2x40 dBm) (143 dBc at 2x40 dBm)

-40

-35

-30

-25

-20

-15

-10

-5

0

A poster displaying a comparison of antenna patterns has been included at the back of the catalog.

Mechanical Specifications

Connector 7/16 DIN bottom or top mount 7/16 DIN bottom or top mountHeight 39.4" (1000 mm) 74.8" (1900 mm)Width 10.4" (265 mm) 10.6" (270 mm)Depth 1.7" (43 mm) 2.76" (70 mm)

Weight 11 lbs (5 kg) 22.1 lbs (10 kg)Survival wind speed 156 mph (70 m/s) 156 mph (70 m/s)Maximum wind area 2.9 sq.ft (0.27 sq.m) 5.5 sq.ft (0.51 sq.m)Frontal wind load @100mph (C=1) 74.9 lbf (333 N) 145 lbf (646 N)

*All metallic components DC grounded for Lightning Protection

Mounting Hardware Options for Installation1) Pole mount 2165.10 2165.102) Combined pole mount/downtilt bracket 7254.10 (-1° to +22°) 7254.10 (-0.5° to +11°)

CommentsGain is typical within frequency band.Front-to-back ratio is defined within 20° from the backwards direction in any plane.Sidelobe suppression and null fill is relative to peak of main beam.Radome color is NCS 2502-B (RAL 7035)(gray).

For a complete list of released models pertaining to gain, electrical downtilt and connector placement,

please see the quick reference guide on page 5.

190

0 M

Hz P

an

el A

nte

nn

aM

-1900-30-23i

-40

-35

-30

-25

-20

-15

-10

-5

0

Typical Horizontal and Vertical 7185.08 Patterns Typical Horizontal and Vertical 7221.14 Patterns

Page 5: Catalog, Allgon - Swedcom

Electrical Specifications 7205 7195(M-1900-65-12.5i) (M-1900-65-15i)

B a s e S t a t i o n A n t e n n a s P a g e 7

1 9 0 0 M H z P a n e l A n t e n n a

Gain 10.5 dBd (12.5 dBi) 13 dBd (15 dBi)Polarization linear, vertical linear, verticalVSWR, 50Ω <1.3:1 (1850 MHz to 1990 MHz) <1.3:1 (1850 MHz to 1990 MHz)

Horizontal 3dB beamwidth 65° 65°Vertical 3dB beamwidth 27° 14°Custom electrical downtilts 0° 0°, 4°, 10°, & 12°

40 degree cone Front-to-back ratio >25 dB >27 dBSuppression of first upper side lobe N/A >18 dBFirst lower null fill N/A >-18 dB

Maximum CW input power 400W 400WTwo tone intermodulation 3rd order <-103 dBm for 2x10W <-103 dBm for 2x10W

(143 dBc at 2x40 dBm) (143 dBc at 2x40 dBm)

-40

-35

-30

-25

-20

-15

-10

-5

0

-40

-35

-30

-25

-20

-15

-10

-5

0

A poster displaying a comparison of antenna patterns has been included at the back of the catalog.

Mechanical Specifications

Connector 7/16 DIN bottom mount 7/16 DIN bottom mountHeight 15" (380 mm) 26" (660 mm)Width 5.4" (136 mm) 5.4" (136 mm)Depth 2" (50 mm) 2" (50 mm)

Weight 3.1 lbs (1.4 kg) 5.7 lbs (2.6 kg)Survival wind speed 156 mph (70 m/s) 156 mph (70 m/s)Maximum wind area .56 sq.ft (0.05 sq.m) 0.97 sq.ft (0.09 sq.m)Frontal wind load @100mph (C=1) 14.6 lbf (65 N) 25.4 lbf (113 N)

*All metallic components DC grounded for Lightning Protection

Mounting Hardware Options for Installation1) Pole mount 2165.10 2165.102) Combined pole mount/downtilt bracket 7254.10 (-2.7° to +71°) 7254.10 (-1.3° to +33°)

CommentsGain is typical within frequency band.Front-to-back ratio is defined within 20° from the backwards direction in any plane.Sidelobe suppression and null fill is relative to peak of main beam.Radome color is NCS 2502-B (RAL 7035)(gray).

For a complete list of released models pertaining to gain, electrical downtilt and connector placement,

please see the quick reference guide on page 5.

190

0 M

Hz

Pa

ne

l A

nte

nn

aM

-190

0-65

-15i

Typical Horizontal and Vertical 7205.15 Patterns Typical Horizontal and Vertical 7195.15 Patterns

M-1

900-

65-1

2.5i

Page 6: Catalog, Allgon - Swedcom

B a s e S t a t i o n A n t e n n a s P a g e 8

Electrical Specifications 7183 7182(M-1900-65-17i) (M-1900-65-18i)

1 9 0 0 M H z P a n e l A n t e n n a

Gain 15 dBd (17 dBi) 16 dBd (18 dBi)Polarization linear, vertical linear, verticalVSWR, 50Ω <1.3:1 (1850 MHz to 1990 MHz) <1.3:1 (1850 MHz to 1990 MHz)

Horizontal 3dB beamwidth 65° 65°Vertical 3dB beamwidth 9° 6.5°Custom electrical downtilts 0°, 2°, 3°, 4°, 6°, & 8° 0°, 2°, 3°, 4°, 5°, 6°, 8°, 10°, & 14°

40 degree cone Front-to-back ratio >28 dB >28 dBSuppression of first upper side lobe >18 dB >18 dBFirst lower null fill >-22 dB >-23 dB

Maximum CW input power 400W 400WTwo tone intermodulation 3rd order < -103 dBm for 2x10W < -103 dBm for 2x10W

(143 dBc at 2x40 dBm) (143 dBc at 2x40 dBm)

-40

-35

-30

-25

-20

-15

-10

-5

0

-40

-35

-30

-25

-20

-15

-10

-5

0

A poster displaying a comparison of antenna patterns has been included at the back of the catalog.

Mechanical Specifications

Connector 7/16 DIN bottom or top mount 7/16 DIN bottom or top mountHeight 39.4" (1000 mm) 51.3" (1300 mm)Width 5.4" (136 mm) 5.4" (136 mm)Depth 2" (50 mm) 2" (50 mm)

Weight 8 lbs (3.6 kg) 9.7 lbs (4.4 kg)Survival wind speed 156 mph (70 m/s) 156 mph (70 m/s)Maximum wind area 1.5 sq.ft (0.14 sq.m) 1.9 sq.ft (0.18 sq.m)Frontal wind load @100mph (C=1) 38.5 lbf (171 N) 50.0 lbf (222 N)

*All metallic components DC grounded for Lightning Protection

Mounting Hardware Options for Installation1) Pole mount 2165.10 2165.102) Combined pole mount/downtilt bracket 7254.10 (-1° to +22°) 7254.10 (-0.7° to +16°)

CommentsGain is typical within frequency band.Front-to-back ratio is defined within 20° from the backwards direction in any plane.Sidelobe suppression and null fill is relative to peak of main beam.Radome color is NCS 2502-B (RAL 7035)(gray).

For a complete list of released models pertaining to gain, electrical downtilt and connector placement,

please see the quick reference guide on page 5.

M-1900-65-17i

190

0 M

Hz P

an

el A

nte

nn

aM

-1900-65-18i

Typical Horizontal and Vertical 7183.15 Patterns Typical Horizontal and Vertical 7182.15 Patterns

Page 7: Catalog, Allgon - Swedcom

B a s e S t a t i o n A n t e n n a s P a g e 9

Electrical Specifications 7220 7204((M-1900-65-20i) (M-1900-90-11.5i)

1 9 0 0 M H z P a n e l A n t e n n a

Gain 18 dBd (20 dBi) 9.5 dBd (11.5 dBi)Polarization linear, vertical linear, verticalVSWR, 50Ω <1.3:1 (1850 MHz to 1990 MHz) <1.3:1 (1850 MHz to 1990 MHz)

Horizontal 3dB beamwidth 65° 90°Vertical 3dB beamwidth 5° 26°Custom electrical downtilts 0°, 2°, 4°, 5°, 7°, & 10° 0°

40 degree cone Front-to-back ratio >30 dB >23 dBSuppression of first upper side lobe >20 dB N/AFirst lower null fill >-20 dB N/A

Maximum CW input power 400W† 400WTwo tone intermodulation 3rd order <-103 dBm for 2x10W <-103 dBm for 2x10W

(143 dBc at 2x40 dBm) (143 dBc at 2x40 dBm)

-40

-35

-30

-25

-20

-15

-10

-5

0

-40

-35

-30

-25

-20

-15

-10

-5

0

A poster displaying a comparison of antenna patterns has been included at the back of the catalog.

Mechanical Specifications

Connector 7/16 DIN bottom or top mount 7/16 DIN bottom mountHeight 74.8" (1900 mm) 15" (380 mm)Width 5.4" (136 mm) 5.4" (136 mm)Depth 2" (50 mm) 2" (50 mm)

Weight 12.8 lbs (5.8 kg) 3.1 lbs (1.4 kg)Survival wind speed 156 mph (70 m/s) 156 mph (70 m/s)Maximum wind area 2.8 sq.ft (0.26 sq.m) 0.5 sq.ft (0.05 sq.m)Frontal wind load @100mph (C=1) 73.1 lbf (325 N) 14.6 lbf (65 N)

*All metallic components DC grounded for Lightning Protection

Mounting Hardware Options for Installation1) Pole mount 2165.11 2165.102) Combined pole mount/downtilt bracket 7254.11 (-0.5° to +11°) 7254.10 (-2.7° to +71°)

CommentsGain is typical within frequency band.Front-to-back ratio is defined within 20° from the backwards direction in any plane.Sidelobe suppression and null fill is relative to peak of main beam.Radome color is NCS 2502-B (RAL 7035)(gray).†Top connector placement is 200W.

For a complete list of released models pertaining to gain, electrical downtilt and connector placement,

please see the quick reference guide on page 5.

190

0 M

Hz

Pa

ne

l A

nte

nn

aM

-190

0-90

-11.

5i

Typical Horizontal and Vertical 7220.08 Patterns Typical Horizontal and Vertical 7204.15 Patterns

M-1

900-

65-2

0i

Page 8: Catalog, Allgon - Swedcom

Electrical Specifications 7194 7198(M-1900-90-13.5i) (M-1900-90-15.5i)

B a s e S t a t i o n A n t e n n a s P a g e 1 0

1 9 0 0 M H z P a n e l A n t e n n a

Gain 11.5 dBd (13.5 dBi) 13.5 dBd (15.5 dBi) Polarization linear, vertical linear, verticalVSWR, 50Ω <1.3:1 (1850 MHz to 1990 MHz) <1.3:1 (1850 MHz to 1990 MHz)

Horizontal 3dB beamwidth 90° 90°Vertical 3dB beamwidth 14° 9°Custom electrical downtilts 0°, 2°, 4°, & 10° 0°, 2°, & 4°

40 degree cone Front-to-back ratio >24 dB >25 dBSuppression of first upper side lobe >17 dB >18 dBFirst lower null fill >-20 dB >-22 dB

Maximum CW input power 400W 400WTwo tone intermodulation 3rd order <-103 dBm for 2x10W <-103 dBm for 2x10W

(143 dBc at 2x40 dBm) (143 dBc at 2x40 dBm)

-40

-35

-30

-25

-20

-15

-10

-5

0

-40

-35

-30

-25

-20

-15

-10

-5

0

A poster displaying a comparison of antenna patterns has been included at the back of the catalog.

Mechanical Specifications

Connector 7/16 DIN bottom mount 7/16 DIN bottom mountHeight 26" (660 mm) 39.4" (1000 mm)Width 5.4" (136 mm) 5.4" (136 mm)Depth 2" (50 mm) 2" (50 mm)

Weight 5.7 lbs (2.6 kg) 7.9 lbs (3.6 kg)Survival wind speed 156 mph (70 m/s) 156 mph (70 m/s)Maximum wind area 0.97 sq.ft (0.9 sq.m) 1.5 sq.ft (0.14 sq.m)Frontal wind load @100mph (C=1) 25.4 lbf (113 N) 38.5 lbf (171 N)

*All metallic components DC grounded for Lightning Protection

Mounting Hardware Options for Installation1) Pole mount 2165.10 2165.102) Combined pole mount/downtilt bracket 7254.10 (-1.3° to +33°) 7254.10 (-1° to +22°)

CommentsGain is typical within frequency band.Front-to-back ratio is defined within 20° from the backwards direction in any plane.Sidelobe suppression and null fill is relative to peak of main beam.Radome color is NCS 2502-B (RAL 7035)(gray).

For a complete list of released models pertaining to gain, electrical downtilt and connector placement,

please see the quick reference guide on page 5.

M-1900-90-13.5i

190

0 M

Hz P

an

el A

nte

nn

aM

-1900-90-15.5i

Typical Horizontal and Vertical 7194.15 Patterns Typical Horizontal and Vertical 7198.15 Patterns

Page 9: Catalog, Allgon - Swedcom

Electrical Specifications 7184 7200(M-1900-90-16.5i) (M-1900-90-18i)

B a s e S t a t i o n A n t e n n a s P a g e 1 1

1 9 0 0 M H z P a n e l A n t e n n a

Gain 14.5 dBd (16.5 dBi) 16 dBd (18 dBi)Polarization linear, vertical linear, verticalVSWR, 50Ω <1.3:1 (1850MHz to 1990MHz) <1.3:1 (1850MHz to 1990MHz)

Horizontal 3dB beamwidth 90° 90°Vertical 3dB beamwidth 6.5° 5°Custom electrical downtilts 0°, 2°, 3°, 4°, 6°, & 8° 0°, 2°, 3°, 4°, 5°, 6°, & 10°

40 degree cone Front-to-back ratio >25 dB >25 dBSuppression of first upper side lobe >18 dB >18 dBFirst lower null fill >-23 dB >-22 dB

Maximum CW input power 400W 400W†Two tone intermodulation 3rd order <-103 dBm for 2x10W <-103 dBm for 2x10W

(143 dBc at 2x40 dBm) (143 dBc at 2x40 dBm)

-40

-35

-30

-25

-20

-15

-10

-5

0

-40

-35

-30

-25

-20

-15

-10

-5

0

A poster displaying a comparison of antenna patterns has been included at the back of the catalog.

Mechanical Specifications

Connector 7/16 DIN bottom or top mount 7/16 DIN bottom or top mountHeight 51.2" (1300 mm) 74.8" (1900 mm)Width 5.4" (136 mm) 5.4" (136 mm)Depth 2" (50 mm) 2" (50 mm)

Weight 9.7 lbs (4.4 kg) 12.8 lbs (5.8 kg)Survival wind speed 156 mph (70 m/s) 156 mph (70 m/s)Maximum wind area 1.9 sq.ft (0.18 sq.m) 2.8 sq.ft (0.26 sq.m)Frontal wind load @100mph (C=1) 50 lbf (222 N) 73.1 lbf (325 N)

*All metallic components DC grounded for Lightning Protection

Mounting Hardware Options for Installation1) Pole mount 2165.10 2165.112) Combined pole mount/downtilt bracket 7254.10 (-0.7° to +16°) 7254.11 (-0.5° to +11°)

CommentsGain is typical within frequency band.Front-to-back ratio is defined within 20° from the backwards direction in any plane.Sidelobe suppression and null fill is relative to peak of main beam.Radome color is NCS 2502-B (RAL 7035)(gray).†Top connector placement is 200W.

For a complete list of released models pertaining to gain, electrical downtilt and connector placement,

please see the quick reference guide on page 5.

190

0 M

Hz

Pa

ne

l A

nte

nn

aM

-190

0-90

-18i

Typical Horizontal and Vertical 7184.15 Patterns Typical Horizontal and Vertical 7200.05 Patterns

M-1

900-

90-1

6.5i

Page 10: Catalog, Allgon - Swedcom

B a s e S t a t i o n A n t e n n a s P a g e 1 2

1 9 0 0 M H z P a n e l A n t e n n a

Gain 17.5 dBd (19.5 dBi) 14 dBd (16 dBi)Polarization linear, vertical linear, verticalVSWR, 50Ω <1.3:1 (1850MHz to 1990MHz) <1.3:1 (1850MHz to 1990MHz)

Horizontal 3dB beamwidth 90° 105°Vertical 3dB beamwidth 3.2° 6.5°Custom electrical downtilts 0° & 2° 0°, 2°, & 6°

40 degree cone Front-to-back ratio >26 dB >24 dBSuppression of first upper side lobe >17 dB >18 dBFirst lower null fill >-16 dB >-23 dB

Maximum CW input power 400W 400WTwo tone intermodulation 3rd order <-103 dBm for 2x10W <-103 dBm for 2x10W

(143 dBc at 2x40 dBm) (143 dBc at 2x40 dBm)

-40

-35

-30

-25

-20

-15

-10

-5

0

-40

-35

-30

-25

-20

-15

-10

-5

0

A poster displaying a comparison of antenna patterns has been included at the back of the catalog.

Mechanical Specifications

Connector 7/16 DIN bottom mount 7/16 DIN bottom mountHeight 102.4" (2600 mm) 51.2" (1300 mm)Width 5" (126 mm) 5" (126 mm)Depth 3.1" (80 mm) 3.1" (80 mm)

Weight 17.6 lbs (9.5 kg) 11.2 lbs (5.1 kg)Survival wind speed 156 mph (70 m/s) 156 mph (70 m/s)Maximum wind area 3.5 sq.ft (0.33 sq.m) 1.8 sq.ft (0.16 sq.m)Frontal wind load @100mph (C=1) 92.6 lbf (412 N) 46.3 lbf (206 N)

*All metallic components DC grounded for Lightning Protection

Mounting Hardware Options for Installation1) pole mount 2165.10 2165.102) combined pole mount/downtilt bracket 7254.10 (-0.4° to +8°) 7254.10 (-0.7° to +16°)

CommentsGain is typical within frequency band.Front-to-back ratio is defined within 20° from the backwards direction in any plane.Sidelobe suppression and null fill is relative to peak of main beam.Radome color is NCS 2502-B (RAL 7035)(gray).

For a complete list of released models pertaining to gain, electrical downtilt and connector placement,

please see the quick reference guide on page 5.

M-1900-90-19.5i

190

0 M

Hz P

an

el A

nte

nn

aM

-1900-105-16i

Electrical Specifications 7199 7208(M-1900-90-19.5i) (M-1900-105-16i)

Typical Horizontal and Vertical 7199.02 Patterns Typical Horizontal and Vertical 7208.01 Patterns

Page 11: Catalog, Allgon - Swedcom

190

0 &

80

0 M

Hz D

ua

l Po

larize

dA

nte

nn

a1 9 0 0 & 8 0 0 M H z D u a l P o l a r i z e dA n t e n n a

Features

• Slant 45 degree design to optimizeperformance

• Superior diversity performance due topatented element design

• High cross polar discrimination factor• High port to port isolation • Exact aperture angle• Minimum squint and tracking• Superior vertical pattern shaping for

interference reduction• 100% verified for vertical pattern

performance

Design Philosophy

The Allgon Dual Polarized antenna is designedwith a slant +45° configuration which has equalsignal strengths. Research has determined that thehorizontal/vertical configuration has large differ-ences in mean signal strength between the twobranches, because the horizontal component hasgreater propagation loss than the vertical. Our de-sign is backed by thorough research and testing toinsure the highest possible diversity gain, isolation,and cross polarization discrimination.

Proper use of materials and their structure ensureperformance integrity. In antennas, the electrical per-formance is directly related to mechanical structure.The choice of radome material is crucial since it actsas a window between the radiating elements and thecoverage area. Our UV stabilized PVC and extrudedfiberglass radomes have extremely low moistureabsorption. Further, our radomes withstand mechan-ical stresses, even at low temperatures and longexposure to UV radiation. For corrosion inhibition, weuse aircraft quality aluminum alloy that is inherentlyresistant to corrosion caused by the environment.

The Allgon Dual Polarized antenna has beendesigned and tested to ensure maximumperformance and reduced polarization errors.Isolation is another important aspect of dualpolarized antennas. A well designed antenna shouldhave at least 30 dB - it is a sign of quality and showshow much effort has been put into the design stage.

Performance

Bracket hardware for the Allgon Dual Polarizedantennas is made of only the highest quality aircraftaluminum and galvanized stainless steel, and isavailable in non-tilt and mechanical tilt for mountingto a pipe. The 800 & 1900 MHz Dual Polarizedantennas can also be flush mounted with tilt or pan-ning. For more information, please see page 67.

Brackets

Quality Materials

B a s e S t a t i o n A n t e n n a s P a g e 1 3

Allgon prides itself on stringent testing require-ments with conservative, yet realistic claims ofthe performance of our product offering. Formore information on testing procedures, seepage 68. Our front-to-back ratios are specifiedfor ±20° from 180° (worst case) to 0° in a totalpower configuration.

Testing

Connectors

7/16 DIN ConnectorType “N” Connector

Page 12: Catalog, Allgon - Swedcom

B a s e S t a t i o n A n t e n n a s P a g e 1 4

190

0 &

80

0 M

Hz

Du

al

Po

lari

zed

An

ten

na

Q U I C K R E F E R E N C E G U I D E

65 Degree 800 MHz Dual Polarized

Gain Part Number Description Page10.5 dBd

13 dBd

12.5 dBd

14.5 dBd

7282.03 XU-800-65-12.5i-4-D 18

7263.01 XU-800-65-15i-0-D 197263.02 XU-800-65-15i-0-N 19

7263.04 XU-800-65-14.5i-6-D 197263.05 XU-800-65-14.5i-6-N 19

7281.02 XU-800-65-16.5i-0-D 19

8.5 dBd

11.5 dBd

13 dBd

7390.00 ALX-800-90-10.5i-0-D 20

7391.00 ALX-800-90-13.5i-0-D 207391.06 ALX-800-90-13.5i-6-D 20

7392.00 ALX-800-90-15i-0-D 207392.06 ALX-800-65-15i-6-D 20

90 Degree 800 MHz Dual Polarized

Gain Part Number Description Page

90 Degree 1900 MHz Dual Polarized

Gain Part Number Description Page11.5 dBd

14 dBd

15.5 dBd

7301.02 XM-1900-90-13.5i-0-D 16

7262.01 XM-1900-90-16i-0-D 177262.02 XM-1900-90-16i-2-D 177262.03 XM-1900-90-16i-4-D 17

7251.02 XM-1900-90-17.5i-0-D 177251.01 XM-1900-90-17.5i-2-D 177251.05 XM-1900-90-17.5i-2-D-U 177251.03 XM-1900-90-17.5i-4-D 177251.04 XM-1900-90-17.5i-6-D 17

65 Degree 1900 MHz Dual Polarized

Gain Part Number Description Page

16.5 dBd7250.02 XM-1900-65-18.5i-0-D 157250.03 XM-1900-65-18.5i-2-D 157250.04 XM-1900-65-18.5i-4-D 15

1900 MHzDual

PolarizedAntenna

X M - 1 9 0 0 - 9 0 - 1 6 i - 0 - D7/16 DINConnector

Description Detail:

CrossPolarizedMetroFamily

FrequencyBand

HorizontalBeamwidth

Electrical DowntiltAngleGain

in dBi

A trailing U indicates connector placement on the top, no U indicates connector placement on the bottom.

Antennas may be ordered using part number or description.

Future Product Offerings in this Family

Page 13: Catalog, Allgon - Swedcom

Electrical Specifications 7250(XM-1900-65-18.5i)

B a s e S t a t i o n A n t e n n a s P a g e 1 5

1 9 0 0 & 8 0 0 M H z D u a lP o l a r i z e d A n t e n n a

Gain 16.5 dBd (18.5 dBi) Polarization linear, dual slant 45VSWR, 50Ω <1.3:1 (1850 MHz to 1990 MHz)Horizontal 3dB beamwidth 65°Vertical 3dB beamwidth 5.5°Custom electrical downtilts 0°, 2°, & 4°40 degree cone Front-to-back ratio >25 dB co-polar, >20 dB total power Cross-polar discrimination, boresite >20 dBPolarization Quality Ratio 20 dB (3dB beamwidth)/10 dB (forward sector)Suppression of first upper side lobe >20 dBFirst lower null fill N/AMaximum CW input power 500W total at 250W per inputTwo tone intermodulation 3rd order <-110 dBm for 2x10W (150 dBc at 2x40 dBm)Isolation between ports >30 dB

-40

-35

-30

-25

-20

-15

-10

-5

0

A poster displaying a comparison of antenna patterns has been included at the back of the catalog.

Typical Horizontal and Vertical 7250.02 Patterns

Mechanical Specifications

Connector 7/16 DIN bottom mountHeight 61.3" (1560 mm)Width 6.3" (160 mm)Depth 2.2" (55 mm)Weight 15.4 lbs (7 kg)Survival wind speed 156 mph (70 m/s)Maximum wind area 2.74 sq.ft (0.25 sq.m)Frontal wind load @100mph (C=1) 71.9 lbf (320 N)

*All feed network components DC grounded for Lightning Protection

Mounting Hardware Options for Installation1) Pole mount 2165.102)Combined pole mount/downtilt bracket 7254.10 (-0.6° to +13°)

CommentsGain is typical within frequency band.Beamwidths are defined using total power.Cross-polar discrimination is defined within -3 dB beamwidth.Front-to-back ratio is defined within 20° from the backwards direction in any plane.Sidelobe suppression and null fill is relative to peak of main beam.Maximum input power is total input power, divided arbitrarily between inputs.Radome color is NCS 2502-B (RAL 7035)(gray).

For a complete list of released models pertaining to gain, electrical downtilt and connector placement,

please see the quick reference guide on page 14.

XM

-1900-65-18.5i19

00

& 8

00

MH

z Du

al P

ola

rized

Page 14: Catalog, Allgon - Swedcom

Electrical Specifications 7301(XM-1900-90-13.5i)

B a s e S t a t i o n A n t e n n a s P a g e 1 6

1 9 0 0 & 8 0 0 M H z D u a lP o l a r i z e d A n t e n n a

Gain 11.5 dBd (13.5 dBi) Polarization linear, dual slant 45VSWR, 50Ω <1.3:1 (1850 MHz to 1990 MHz)Horizontal 3dB beamwidth 90°Vertical 3dB beamwidth 15°Custom electrical downtilts 0°40 degree cone Front-to-back ratio > 24 dB co-polar, > 20 dB total powerCross-polar discrimination, boresite >15 dBPolarization Quality Ratio 15 dB (3 dB beamwidth)/10 dB (forward sector)Suppression of first upper side lobe >20 dBFirst lower null fill N/AMaximum CW input power 500W total at 250W per inputTwo tone intermodulation 3rd order <-110 dBm for 2x10W (150 dBc at 2x40 dBm)Isolation between ports >30 dB

-40

-35

-30

-25

-20

-15

-10

-5

0

A poster displaying a comparison of antenna patterns has been included at the back of the catalog.

Typical Horizontal and Vertical 7301.02 Patterns

Mechanical Specifications

Connector 7/16 DIN bottom mountHeight 25.6" (650 mm)Width 5" (126 mm)Depth 3.2" (80 mm)Weight 6.6 lbs (3 kg)Survival wind speed 156 mph (70 m/s)Maximum wind area 0.9 sq.ft (0.08 sq.m)Frontal wind load @100mph (C=1) 23.2 lbf (103 N)*All feed network components DC grounded for Lightning Protection

Mounting Hardware Options for Installation1) Pole mount 2165.102)Combined pole mount/downtilt bracket 7254.10 (-1.5° to +35°)

CommentsGain is typical within frequency band.Beamwidths are defined using total power.Cross-polar discrimination is defined within -3 dB beamwidth.Front-to-back ratio is defined within 20° from the backwards direction in any plane.Sidelobe suppression and null fill is relative to peak of main beam.Maximum input power is total input power, divided arbitrarily between inputs.Radome color is NCS 2502-B (RAL 7035)(gray).

For a complete list of released models pertaining to gain, electrical downtilt and connector placement,

please see the quick reference guide on page 14.

XM

-190

0-90

-13.

5i19

00

& 8

00

MH

z D

ua

l P

ola

rize

dA

nte

nn

a

Page 15: Catalog, Allgon - Swedcom

Electrical Specifications 7262 7251(XM-1900-90-16i) (XM-1900-90-17.5i)

B a s e S t a t i o n A n t e n n a s P a g e 1 7

1 9 0 0 & 8 0 0 M H z D u a lP o l a r i z e d A n t e n n a

Gain 14 dBd (16 dBi) 15.5 dBd (17.5 dBi)Polarization linear, dual slant 45 linear, dual slant 45VSWR, 50Ω <1.3:1 (1850 MHz to 1990 MHz) <1.3:1 (1850 MHz to 1990 MHz)Horizontal 3dB beamwidth 90° 90°Vertical 3dB beamwidth 7.5° 5°Custom electrical downtilts 0°, 2°, & 4° 0°, 2°, 4° & 6°40 degree cone Front-to-back ratio >24 dB co-polar, >20 dB total power >24 dB co-polar, >20 dB total powerCross-polar discrimination, boresite >15 dB >15 dBPolarization Quality Ratio 15 dB (3 dB beamwidth)/10 dB (forward sector) 15 dB (3 dB beamwidth)/10 dB (forward sector)Suppression of first upper side lobe > 17 dB >20 dBFirst lower null fill > -18 dB N/AMaximum CW input power 500W total at 250W per input 500W total at 250W per inputTwo tone intermodulation 3rd order< -110 dBm for 2x10W (150 dBc at 2x40 dBm) <-110 dBm for 2x10W (150 dBc at 2x40 dBm)Isolation between ports >30 dB >30 dB

-40

-35

-30

-25

-20

-15

-10

-5

0

A poster displaying a comparison of antenna patterns has been included at the back of the catalog.

Typical Horizontal and Vertical 7251.02 Patterns

-40

-35

-30

-25

-20

-15

-10

-5

0

Typical Horizontal and Vertical 7262.01 Patterns

Mechanical Specifications

Connector 7/16 DIN bottom and top mount 7/16 DIN bottom mountHeight 51.2" (1300 mm) 74.8" (1900 mm)Width 5" (126 mm) 5" (126 mm)Depth 3.2" (80 mm) 3.2" (80 mm)Weight 10.8 lbs (4.9 kg) 17.6 lbs (8 kg)Survival wind speed 156 mph (70 m/s) 156 mph (70 m/s)Maximum wind area 1.8 sq.ft (0.16 sq.m) 2.6 sq.ft (0.24 sq.m)Frontal wind load @100mph (C=1) 46.2 lbf (206 N) 67.7 lbf (301 N)*All feed network components DC grounded for Lightning Protection

Mounting Hardware Options for Installation1) Pole mount 2165.10 2165.102) Combined pole mount/downtilt bracket 7254.10 (-0.7° to +16°) 7254.10 (-0.5° to +11°)

CommentsGain is typical within frequency band.Beamwidths are defined using total power.Cross-polar discrimination is defined within -3 dB beamwidth.Front-to-back ratio is defined within 20° from the backwards direction in any plane.Sidelobe suppression and null fill is relative to peak of main beam.Maximum input power is total input power, divided arbitrarily between inputs.Radome color is NCS 2502-B (RAL 7035)(gray).

For a complete list of released models pertaining to gain, electrical downtilt and connector placement,

please see the quick reference guide on page 14.

190

0 &

80

0 M

Hz D

ua

l Po

larize

dA

nte

nn

aX

M-1900-90-17.5i

XM

-1900-90-16i

Page 16: Catalog, Allgon - Swedcom

XU

-800

-65-

12.5

i

Electrical Specifications 7282(XU-800-65-12.5i)

B a s e S t a t i o n A n t e n n a s P a g e 1 8

1 9 0 0 & 8 0 0 M H z D u a lP o l a r i z e d A n t e n n a

Gain 10.5 dBd (12.5 dBi)Polarization linear, dual slant 45VSWR, 50Ω <1.4:1 (824 MHz to 869 MHz)VSWR, 50Ω <1.3:1 (869 MHz to 896 MHz)Horizontal 3dB beamwidth 65°Vertical 3dB beamwidth 25°Custom electrical downtilts 4°40 degree cone Front-to-back ratio >22 dB co-polar, >18 dB total powerCross-polar discrimination, boresite >20 dBPolarization Quality Ratio 20 dB (3 dB beamwidth)/10 dB (forward sector)Suppression of first upper side lobe >19 dBMaximum CW input power 500W total at 250W per inputTwo tone intermodulation 3rd order< -107 dBm for 2x20W (150 dBc at 2x43 dBm)Isolation between ports >30 dB

-40

-35

-30

-25

-20

-15

-10

-5

0

A poster displaying a comparison of antenna patterns has been included at the back of the catalog.

Typical Horizontal and Vertical 7282.04 Patterns

Mechanical Specifications

Connector 7/16 DIN bottom mountHeight 25.9" (659 mm)Width 10.1" (256 mm)Depth 2" (50 mm)Weight 8.8 lbs (4kg)Survival wind speed 123 mph (55 m/s)Maximum wind area 1.8 sq.ft (0.17 sq.m)Frontal wind load @100mph (C=1) 47.7 lbf (212 N)*All feed network components DC grounded for Lightning Protection

Mounting Hardware Options for Installation1) Pole mount 2165.102) Combined pole mount/downtilt bracket 7254.10 (-1.5° to +35°)

CommentsGain is typical within frequency band.Beamwidths are defined using total power.Cross-polar discrimination is defined within -3 dB beamwidth.Front-to-back ratio is defined within 20° from the backwards direction in any plane.Sidelobe suppression and null fill is relative to peak of main beam.Maximum input power is total input power, divided arbitrarily between inputs.Radome color is NCS 2502-B (RAL 7035)(gray).

For a complete list of released models pertaining to gain, electrical downtilt and connector placement,

please see the quick reference guide on page 14.

190

0 &

80

0 M

Hz

Du

al

Po

lari

zed

An

ten

na

Page 17: Catalog, Allgon - Swedcom

Electrical Specifications 7263 7281(XU-800-65-15i) (XU-800-65-16.5i)

B a s e S t a t i o n A n t e n n a s P a g e 1 9

1 9 0 0 & 8 0 0 M H z D u a lP o l a r i z e d A n t e n n a

Gain 13 dBd (15 dBi) Polarization linear, dual slant 45VSWR, 50Ω <1.4:1 (824 MHz to 869 MHz)VSWR, 50Ω <1.3:1 (869 MHz to 896 MHz)Horizontal 3dB beamwidth 65°Vertical 3dB beamwidth 13°Custom electrical downtilts 0° & 6°40 degree cone Front-to-back ratio >22 dB co-polar, >20 dB total powerCross-polar discrimination, boresite >18 dBPolarization Quality Ratio 18 dB (3dB beamwidth)/10 dB (forward sector)Suppression of first upper side lobe >14 dBMaximum CW input power 500W total at 250W per inputTwo tone intermodulation 3rd order <-107 dBm for 2x20W (150 dBc at 2x43 dBm)Isolation between ports >30 dB

-40

-35

-30

-25

-20

-15

-10

-5

0

-40

-35

-30

-25

-20

-15

-10

-5

0

A poster displaying a comparison of antenna patterns has been included at the back of the catalog.

Typical Horizontal and Vertical 7263.01 Patterns Typical Horizontal and Vertical 7281.02 Patterns

Mechanical Specifications

Connector 7/16 DIN or Type N bottom mount 7/16 DIN bottom mountHeight 52" (1320 mm) 76.3" (1939 mm)Width 10.4" (256 mm) 10.1" (256 mm)Depth 2" (50 mm) 2" (50 mm)Weight 16.5 lbs (7.5 kg) 19.8 lbs (9 kg)Survival wind speed 123 mph (55 m/s) 123 mph (55 m/s)Maximum wind area 3.6 sq. ft (0.33 sq.m) 5.4 sq. ft (0.50 sq.m)Frontal wind load @100mph (C=1) 94.1 lbf (419 N) 140 lbf (625 N)*All feed network components DC grounded for Lightning Protection

Mounting Hardware Options for Installation1) Pole mount 2165.10 2165.10 2)Combined pole mount/downtilt bracket 7254.10 (-0.7° to +16°) 7254.10 (-0.5° to +11°)

CommentsGain is typical within frequency band.Beamwidths are defined using total power.Cross-polar discrimination is defined within -3 dB beamwidth.Front-to-back ratio is defined within 20° from the backwards direction in any plane.Sidelobe suppression and null fill is relative to peak of main beam.Maximum input power is total input power, divided arbitrarily between inputs.Radome color is NCS 2502-B (RAL 7035)(gray).

For a complete list of released models pertaining to gain, electrical downtilt and connector placement,

please see the quick reference guide on page 14.

14.5 dBd (16.5 dBi)linear, dual slant 45

<1.4:1 (824 MHz to 869 MHz)<1.4:1 (869 MHz to 896 MHz)

65°9°0°

>24 dB co-polar, >20 dB total power>20 dB

20dB (3 dB beamwidth) /10 dB (forward sector)>15 dB

500W total at 250W per input<-107 dBm for 2x20W (150 dBc at 2x43 dBm)

>30 dB

190

0 &

80

0 M

Hz D

ua

l Po

larize

dA

nte

nn

aX

U-800-65-16.5i

XU

-800-65-15i

Page 18: Catalog, Allgon - Swedcom

Future Product Offerings in this Family

ALX

-800

-90-

13.5

i

Preliminary Electrical Specifications 7391(ALX-800-90-13.5i)

B a s e S t a t i o n A n t e n n a s P a g e 2 0

1 9 0 0 & 8 0 0 M H z D u a lP o l a r i z e d A n t e n n a

Gain 11.5 dBd (13.5 dBi)Polarization linear, dual slant 45VSWR, 50Ω <1.5:1 (806 MHz to 869 MHz)VSWR, 50Ω <1.4:1 (869 MHz to 896 MHz)Horizontal 3dB beamwidth 90°Vertical 3dB beamwidth 14°Custom electrical downtilts 0° & 6°40 degree cone Front-to-back ratio >24 dB co-polar, >20 dB total powerCross-polar discrimination, boresite >20 dBPolarization Quality Ratio 13 dB (3 dB beamwidth)/13 dB (forward sector)Suppression of first upper side lobe >16 dBFirst lower null fill >-19 dBMaximum CW input power 500W total at 250W per inputTwo tone intermodulation 3rd order< -107 dBm for 2x20W (150 dBc at 2x43 dBm)Isolation between ports >30 dB

-40

-35

-30

-25

-20

-15

-10

-5

0

A poster displaying a comparison of antenna patterns has been included at the back of the catalog.

Typical Horizontal and Vertical 7391.00 Patterns

Preliminary Mechanical Specifications

Connector 7/16 DIN bottom mountHeight 53" (1350 mm)Width 11" (280 mm)Depth 4.9" (125 mm)Weight 18.7 lbs (8.5 kg)Survival wind speed 156 mph (70 m/s)Maximum wind area 4.1 sq.ft (0.38 sq.m)Frontal wind load @100mph (C=1) 107 lbf (476 N)*All feed network components DC grounded for Lightning Protection

Mounting Hardware Options for Installation1) Pole mount 2165.102) Combined pole mount/downtilt bracket 7254.10 (-0.6° to +15°)

CommentsGain is typical within frequency band.Beamwidths are defined using total power.Cross-polar discrimination is defined within -3 dB beamwidth.Front-to-back ratio is defined within 20° from the backwards direction in any plane.Sidelobe suppression and null fill is relative to peak of main beam.Maximum input power is total input power, divided arbitrarily between inputs.Radome color is NCS 2502-B (RAL 7035)(gray).

For a complete list of released models pertaining to gain, electrical downtilt and connector placement,

please see the quick reference guide on page 14.

190

0 &

80

0 M

Hz

Du

al

Po

lari

zed

An

ten

na

7390.00 ALX-800-90-10.5i-0-D710 x 280 x 125 mm

7392.00 ALX-800-90-15i-0-D1990 x 280 x 125 mm

7392.06 ALX-800-65-15i-6-D1990 x 280 x 125 mm

Page 19: Catalog, Allgon - Swedcom

80

0 M

Hz A

llgo

n Lo

gP

erio

dic A

nte

nn

a8 0 0 M H z A l l g o n L o g P e r i o d i c A n t e n n a

Features

• Industry norm• Wide band performance covering iDEN™,

AMPS, CDMA 800, TDMA 800• Proven 10 year track record • Workhorse of the cellular industry• World-class manufacturing• Problem-free design• Trail blazer of front-to-back• Used as the F/B figure of merit• Used in : Europe, Asia, North America,

Central America, and South America.

Design Philosophy

Our log periodic is designed in a highly repeatableprocess that is so precise that absolutely no tuning isrequired. No adjustments are made because withAllgon quality built in by design, no adjustments arenecessary. For long life and problem free performance,Allgon uses a robust mechanical design. Two highstrength plates of aircraft quality aluminum arefastened together to form an extremely rugged pack-age. The mechanical strength is independent of theradome, which acts only to physically protect andform a weather shield for the elements.

Proper use of materials and their structure ensuresperformance integrity. In antennas the electricalperformance is directly related to mechanicalperformance. The choice of radome material iscrucial as it acts as a window between theradiating elements and the coverage area. Our UVstabilized PVC radome is resistant to moistureabsorption. Further, our radomes can withstandmechanical stresses, even at low temperaturesand long exposure to UV radiation. For corrosioninhibition, we use aircraft quality aluminum alloythat is inherently resistant to corrosion that mightbe caused by the environment.

The Allgon Log Periodic is known to be the mostconsistent performing antenna on the markettoday. While others have only a select few modelswith high Front-to-Back, Allgon’s high Front-to-Back ratio is exhibited over a complete selection ofgains and azimuth opening angles.

Performance

Bracket hardware for the Allgon Log Periodicantennas is made of only the highest quality aircraftaluminum and galvanized stainless steel, and isavailable in non tilt and mechanical tilt for mountingto a pipe. For more information please see page 67.

Brackets

B a s e S t a t i o n A n t e n n a s P a g e 2 1

Allgon prides itself on stringent testing require-ments with conservative, yet realistic claims of theperformance of our product offering. For moreinformation on testing procedures, see page 68.Our front-to-back ratios are specified for ±20°from 180° (worst case) to 0°.

Testing

Quality Materials

7/16 DIN Connector, Type “N” Connector

Connectors

Page 20: Catalog, Allgon - Swedcom

B a s e S t a t i o n A n t e n n a s P a g e 2 2

80

0 M

Hz

All

go

n L

og

Pe

rio

dic

An

ten

na

Q U I C K R E F E R E N C E G U I D E

95 Degree 800 MHz ALP

Gain Part Number Description Page

9 dBd

12 dBd

14 dBd

7130.14.33.00 A-800-95-11i-0-D 277130.14.05.00 A-800-95-11i-0-N 27

7130.16.33.00 A-800-95-14i-0-D 287130.16.05.00 A-800-95-14i-0-N 287130.16.33.06 A-800-95-14i-6-D 28

7130.18.33.00 A-800-95-16i-0-D 287130.18.05.00 A-800-95-16i-0-N 28

60 Degree 800 MHz ALP

Gain Part Number Description Page

11 dBd

14 dBd

16 dBd

7125.14.33.00 A-800-60-13i-0-D 247125.14.05.00 A-800-60-13i-0-N 24

7125.16.33.00 A-800-60-16i-0-D 247125.16.05.00 A-800-60-16i-0-N 247125.16.33.06 A-800-60-16i-6-D 24

7125.18.33.00 A-800-60-18i-0-D 257125.18.05.00 A-800-60-18i-0-N 25

40 Degree 800 MHz ALP

Gain Part Number Description Page

12 dBd

14 dBd

85 Degree 800 MHz ALP

7131.30.33.00 A-800-40-14i-15-D 237131.30.05.00 A-800-40-14i-15-N 23

7131.20.33.00 A-800-40-16i-0-D 237131.20.05.00 A-800-40-16i-0-N 23

7131.16.33.00 A-800-40-18i-0-D 237131.16.05.00 A-800-40-18i-0-N 2316 dBd

Gain Part Number Description Page7 dBd

9 dBd

10 dBd

11 dBd

13 dBd

7129.12.33.00 A-800-85-9i-0-D 25

7129.14.33.00 A-800-85-11i-0-D 267129.14.05.00 A-800-85-11i-0-N 26

7129.32.33.00 A-800-85-12i-10-D 267129.32.05.00 A-800-85-12i-10-N 26

7129.20.33.00 A-800-85-13i-0-D 267129.20.05.00 A-800-85-13i-0-N 26

7129.16.33.00 A-800-85-15i-0-D 277129.16.05.00 A-800-85-15i-0-N 27

110 Degree 800 MHz ALP

Gain Part Number Description Page9 dBd

11 dBd

7120.20.05.00 A-800-110-11i-0-N 29

7120.16.33.00 A-800-110-13i-0-D 297120.16.05.00 A-800-110-13i-0-N 29

800 MHzAllgon

LogPeriodic

Antenna

A - 8 0 0 - 9 5 - 1 4 i - 0 - D7/16 DINConnector

Description Detail:

AllgonLogPeriodicFamily

FrequencyBand

HorizontalBeamwidth

Electrical DowntiltAngleGain

in dBi

Antennas may be ordered using part number or description.

Page 21: Catalog, Allgon - Swedcom

A-800-40-16i

Electrical Specifications 7131.30 & 7131.20 7131.16(A-800-40-16i) (A-800-40-18i)

B a s e S t a t i o n A n t e n n a s P a g e 2 3

8 0 0 M H z A l l g o n L o g P e r i o d i c A n t e n n a

Gain 14 dBd (16 dBi) 16 dBd (18 dBi)Polarization linear, vertical linear, verticalVSWR, 50Ω <1.5:1 (806 MHz to 824 MHz) <1.5:1 (806 MHz to 824 MHz)VSWR, 50Ω <1.4:1 (824 MHz to 896 MHz) <1.4:1 (824 MHz to 896 MHz)Horizontal 3dB beamwidth 40° 40°Vertical 3dB beamwidth 25° 15°Custom electrical downtilts 0° & 15° 0°40 degree cone Front-to-back ratio >30 dB >30 dBSuppression of first upper side lobe >17 dB >17 dBMaximum CW input power 500W 500WTwo tone intermodulation 3rd order <-103 dBm for 2x20W <-103 dBm for 2x20W

(146 dBc at 2x43 dBm) (146 dBc at 2x43 dBm)

-40

-35

-30

-25

-20

-15

-10

-5

0

-40

-35

-30

-25

-20

-15

-10

-5

0

A poster displaying a comparison of antenna patterns has been included at the back of the catalog.

Typical Horizontal and Vertical 7131.20 Patterns Typical Horizontal and Vertical 7131.16 Patterns

Mechanical Specifications

Connector 7/16 DIN or Type N side mountedHeight 31.5" (800 mm) 52" (1320 mm)Width 23.2" (590 mm) 23.2" (590 mm)Depth 13.8" (350 mm) 13.8" (350 mm)Weight 15.4 lbs (7kg) 23.2 lbs (11 kg)Survival wind speed 156 mph (70 m/s) 156 mph (70 m/s)Maximum wind area 4 sq.ft (0.37 sq.m) 6.5 sq.ft (0.60 sq.m)Maximum wind load @100mph 105 lbf (477 N) 171 lbf (760 N)*All metallic components DC grounded for Lightning Protection

Mounting Hardware Options for Installation1) Pole mount 2165.10 2165.10 2) Combined pole mount/downtilt bracket 7254.10 (-1.5° to +34°) 7254.10 (-1° to +24°)

CommentsGain is typical within frequency band.Front-to-back ratio is defined within 20° from the backwards direction in any plane.Sidelobe suppression and null fill is relative to peak of main beam.Radome color is NCS 2502-B (RAL 7035)(gray).

For a complete list of released models pertaining to gain, electrical downtilt and connector placement,

please see the quick reference guide on page 22.

80

0 M

Hz A

llgo

n Lo

g P

erio

dic

An

ten

na

A-800-40-18i

Page 22: Catalog, Allgon - Swedcom

A-8

00-6

0-16

i

B a s e S t a t i o n A n t e n n a s P a g e 2 4

8 0 0 M H z A l l g o n L o g P e r i o d i c A n t e n n a

-40

-35

-30

-25

-20

-15

-10

-5

0

-40

-35

-30

-25

-20

-15

-10

-5

0

A poster displaying a comparison of antenna patterns has been included at the back of the catalog.

Typical Horizontal and Vertical 7125.14 Patterns Typical Horizontal and Vertical 7125.16 Patterns

For a complete list of released models pertaining to gain, electrical downtilt and connector placement,

please see the quick reference guide on page 22.

80

0 M

Hz

All

go

n L

og

Pe

rio

dic

An

ten

na

A-8

00-6

0-13

i

Electrical Specifications 7125.14 7125.16(A-800-60-13i) (A-800-60-16i)

Gain 11 dBd (13 dBi) 14 dBd (16 dBi)Polarization linear, vertical linear, verticalVSWR, 50Ω <1.5:1 (806 MHz to 824 MHz) <1.5:1 (806 MHz to 824 MHz)VSWR, 50Ω <1.4:1 (824 MHz to 896 MHz) <1.4:1 (824 MHz to 896 MHz)Horizontal 3dB beamwidth 60° 60°Vertical 3dB beamwidth 30° 15°Custom electrical downtilts 0° 0° & 6°40 degree cone Front-to-back ratio >30 dB >30 dBSuppression of first upper side lobe >15 dB >17 dBMaximum CW input power 500W 500WTwo tone intermodulation 3rd order <-103 dBm for 2x20W <-103 dBm for 2x20W

(146 dBc at 2x43 dBm) (146 dBc at 2x43 dBm)

Mechanical Specifications

Connector 7/16 DIN or Type N side mountedHeight 26.8" (680 mm) 52" (1320 mm)Width 17.3" (440 mm) 17.3" (440 mm)Depth 11.4" (290 mm) 11.4" (290 mm)Weight 11 lbs (5 kg) 18.9 lbs (8.6 kg)Survival wind speed 156 mph (70 m/s) 156 mph (70 m/s)Maximum wind area 2.3 sq.ft (0.21 sq.m) 5.4 sq.ft (0.50 sq.m)Maximum wind load @100mph 60.4 lbf (269 N) 142 lbf (631 N)*All metallic components DC grounded for Lightning Protection

Mounting Hardware Options for Installation1) Pole mount 2165.10 2165.102) Combined pole mount/downtilt bracket 7254.10 (-2° to +49°) 7254.10 (-1° to +24°)

CommentsGain is typical within frequency band.Front-to-back ratio is defined within 20° from the backwards direction in any plane.Sidelobe suppression and null fill is relative to peak of main beam.Radome color is NCS 2502-B (RAL 7035)(gray).

Page 23: Catalog, Allgon - Swedcom

A-800-60-18i

Electrical Specifications 7125.18 7129.12(A-800-60-18i) (A-800-85-9i)

B a s e S t a t i o n A n t e n n a s P a g e 2 5

8 0 0 M H z A l l g o n L o g P e r i o d i c A n t e n n a

Gain 16 dBd (18 dBi) 7 dBd (9 dBi)Polarization linear, vertical linear, verticalVSWR, 50Ω <1.5:1 (806 MHz to 824 MHz) <1.5:1 (806 MHz to 824 MHz)VSWR, 50Ω <1.4:1 (824 MHz to 896 MHz) <1.4:1 (824 MHz to 896 MHz)Horizontal 3dB beamwidth 60° 85°Vertical 3dB beamwidth 8° 60°Custom electrical downtilts 0° 0°40 degree cone Front-to-back ratio >30 dB >30 dBSuppression of first upper side lobe >17 dB >20 dBMaximum CW input power 500W 300WTwo tone intermodulation 3rd order <-103 dBm for 2x20W <-103 dBm for 2x20W

(146 dBc at 2x43 dBm) (146 dBc at 2x43 dBm)

-40

-35

-30

-25

-20

-15

-10

-5

0

A poster displaying a comparison of antenna patterns has been included at the back of the catalog.

Typical Horizontal and Vertical 7125.18 Patterns

Mechanical Specifications

Connector 7/16 DIN or Type N side mounted 7/16 DIN side mountedHeight 102" (2600 mm) 14.2" (360 mm)Width 17.3" (440 mm) 13" (330 mm)Depth 12.6" (320 mm) 11.4" (290 mm)Weight 38.5 lbs (17.5 kg) 4.4 lbs (2 kg)Survival wind speed 156 mph (70 m/s) 156 mph (70 m/s)Maximum wind area 10.2 sq.ft (0.95 sq.m) 1.2 sq.ft (0.11 sq.m)Maximum wind load @100mph 268 lbf (1190 N) 31.5 lbf (138 N)*All metallic components DC grounded for Lightning Protection

Mounting Hardware Options for Installation1) Pole mount 2165.10 2165.10 2) Combined pole mount/downtilt bracket 7254.10 (-0.5° to +12°) N/A

CommentsGain is typical within frequency band.Front-to-back ratio is defined within 20° from the backwards direction in any plane.Sidelobe suppression and null fill is relative to peak of main beam.Radome color is NCS 2502-B (RAL 7035)(gray).

For a complete list of released models pertaining to gain, electrical downtilt and connector placement,

please see the quick reference guide on page 22.

80

0 M

Hz A

llgo

n Lo

g P

erio

dic

An

ten

na

-40

-35

-30

-25

-20

-15

-10

-5

0

Typical Horizontal and Vertical 7129.12 Patterns

A-800-85-9i

Page 24: Catalog, Allgon - Swedcom

A-8

00-8

5-13

i

B a s e S t a t i o n A n t e n n a s P a g e 2 6

8 0 0 M H z A l l g o n L o g P e r i o d i c A n t e n n a

-40

-35

-30

-25

-20

-15

-10

-5

0

A poster displaying a comparison of antenna patterns has been included at the back of the catalog.

Typical Horizontal and Vertical 7129.14 Patterns

For a complete list of released models pertaining to gain, electrical downtilt and connector placement,

please see the quick reference guide on page 22.

80

0 M

Hz

All

go

n L

og

Pe

rio

dic

An

ten

na

Electrical Specifications 7129.14 7129.32 & 7129.20(A-800-85-11i) (A-800-85-13i)

Gain 9 dBd (11 dBi) 11 dBd (13 dBi)Polarization linear, vertical linear, verticalVSWR, 50Ω <1.5:1 (806 MHz to 824 MHz) <1.5:1 (806 MHz to 824 MHz)VSWR, 50Ω <1.4:1 (824 MHz to 896 MHz) <1.4:1 (824 MHz to 896 MHz)Horizontal 3dB beamwidth 85° 110°Vertical 3dB beamwidth 30° 25°Custom electrical downtilts 0° 0° & 10°40 degree cone Front-to-back ratio >30 dB >30 dBSuppression of first upper side lobe >15 dB >17 dBMaximum CW input power 500W 500WTwo tone intermodulation 3rd order <-103 dBm for 2x20W <-103 dBm for 2x20W

(146 dBc at 2x43 dBm) (146 dBc at 2x43 dBm)

Mechanical Specifications

Connector 7/16 DIN or Type N side mountedHeight 26.8" (680 mm) 31.5" (800 mm)Width 13" (330 mm) 13" (330 mm)Depth 11.4" (290 mm) 11.4" (290 mm)Weight 9.9 lbs (4.5 kg) 11.2 lbs (5.1 kg)Survival wind speed 156 mph (70 m/s) 156 mph (70 m/s)Maximum wind area 2.1 sq.ft (0.20 sq.m) 2.7 sq.ft (0.25 sq.m)Maximum wind load @100mph 55.2 lbf (246 N) 70.9 lbf (316 N)*All metallic components DC grounded for Lightning Protection

Mounting Hardware Options for Installation1) Pole mount 2165.10 2165.102) Combined pole mount/downtilt bracket 7254.10 (-2° to +49°) 7254.10 (-1.5° to +34°)

CommentsGain is typical within frequency band.Front-to-back ratio is defined within 20° from the backwards direction in any plane.Sidelobe suppression and null fill is relative to peak of main beam.Radome color is NCS 2502-B (RAL 7035)(gray).

-40

-35

-30

-25

-20

-15

-10

-5

0

Typical Horizontal and Vertical 7129.32 Patterns

A-8

00-8

5-11

i

Page 25: Catalog, Allgon - Swedcom

Electrical Specifications 7129.16 7130.14(A-800-85-15i) (A-800-95-11i)

B a s e S t a t i o n A n t e n n a s P a g e 2 7

8 0 0 M H z A l l g o n L o g P e r i o d i c A n t e n n a

Gain 13 dBd (15 dBi) 9 dBd (11 dBi)Polarization linear, vertical linear, verticalVSWR, 50Ω <1.5:1 (806 MHz to 824 MHz) <1.5:1 (806 MHz to 824 MHz)VSWR, 50Ω <1.4:1 (824 MHz to 896 MHz) <1.4:1 (824 MHz to 896 MHz)Horizontal 3dB beamwidth 85° 95°Vertical 3dB beamwidth 15° 30°Custom electrical downtilts 0° 0°40 degree cone Front-to-back ratio >30 dB >28 dBSuppression of first upper side lobe >17 dB >15 dB

Maximum CW input power 500W 500WTwo tone intermodulation 3rd order <-103 dBm for 2x20W <-103 dBm for 2x20W

(146 dBc at 2x43 dBm) (146 dBc at 2x43 dBm)

-40

-35

-30

-25

-20

-15

-10

-5

0

A poster displaying a comparison of antenna patterns has been included at the back of the catalog.

Typical Horizontal and Vertical 7129.16 Patterns

Mechanical Specifications

Connector 7/16 DIN or Type N side mountedHeight 52" (1320 mm) 26.8" (680 mm)Width 13" (330 mm) 11.4" (290 mm)Depth 11.4" (290 mm) 11.4" (290 mm)Weight 17.6 lbs (8 kg) 9.9 lbs (4.5 kg)Survival wind speed 156 mph (70 m/s) 156 mph (70 m/s)Maximum wind area 4.5 sq.ft (0.42 sq.m) 1.7 sq.ft (0.16 sq.m)Maximum wind load @100mph 118 lbf (526 N) 44.6 lbf (199 N)*All metallic components DC grounded for Lightning Protection

Mounting Hardware Options for Installation1) Pole mount 2165.10 2165.102) Combined pole mount/downtilt bracket 7254.10 (-1° to +24°) 7254.10 (-2° to +49°)

CommentsGain is typical within frequency band.Front-to-back ratio is defined within 20° from the backwards direction in any plane.Sidelobe suppression and null fill is relative to peak of main beam.Radome color is NCS 2502-B (RAL 7035)(gray).

For a complete list of released models pertaining to gain, electrical downtilt and connector placement,

please see the quick reference guide on page 22.

80

0 M

Hz A

llgo

n Lo

g P

erio

dic

An

ten

na

A-800-85-15i

-40

-35

-30

-25

-20

-15

-10

-5

0

Typical Horizontal and Vertical 7130.14 Patterns

A-800-95-11i

Page 26: Catalog, Allgon - Swedcom

B a s e S t a t i o n A n t e n n a s P a g e 2 8

8 0 0 M H z A l l g o n L o g P e r i o d i c A n t e n n a

-40

-35

-30

-25

-20

-15

-10

-5

0

A poster displaying a comparison of antenna patterns has been included at the back of the catalog.

Typical Horizontal and Vertical 7130.16 Patterns

For a complete list of released models pertaining to gain, electrical downtilt and connector placement, please

see the quick reference guide on page 22.

80

0 M

Hz

All

go

n L

og

Pe

rio

dic

An

ten

na

Electrical Specifications 7130.16 7130.18(A-800-95-14i) (A-800-95-16i)

Gain 12 dBd (14 dBi) 14 dBd (16 dBi)Polarization linear, vertical linear, verticalVSWR, 50Ω <1.5:1 (806 MHz to 824 MHz) <1.5:1 (806 MHz to 824 MHz)VSWR, 50Ω <1.4:1 (824 MHz to 896 MHz) <1.4:1 (824 MHz to 896 MHz)Horizontal 3dB beamwidth 95° 95°Vertical 3dB beamwidth 15° 8°Custom electrical downtilts 0° & 6° 0°40 degree cone Front-to-back ratio >28 dB >28 dBSuppression of first upper side lobe >17 dB >20 dBMaximum CW input power 500W 500WTwo tone intermodulation 3rd order <-103 dBm for 2x20W <-103 dBm for 2x20W

(146 dBc at 2x43 dBm) (146 dBc at 2x43 dBm)

Mechanical Specifications

Connector 7/16 DIN or Type N side mountedHeight 52" (1320 mm) 102.4" (2600 mm)Width 11.4" (290 mm) 11.4" (290 mm)Depth 11.4" (290 mm) 11.4" (290 mm)Weight 17.6 lbs (8 kg) 35.2 lbs (16 kg)Survival wind speed 156 mph (70 m/s) 156 mph (70 m/s)Maximum wind area 3.9 sq.ft (0.36 sq.m) 8.1 sq.ft (0.75 sq.m)Maximum wind load @100mph 103 lbf (456 N) 213 lbf (947 N)*All metallic components DC grounded for Lightning Protection

Mounting Hardware Options for Installation1) Pole mount 2165.10 2165.102) Combined pole mount/downtilt bracket 7254.10 (-1° to +24°) 7254.10 (-0.5° to +12°)

CommentsGain is typical within frequency band.Front-to-back ratio is defined within 20° from the backwards direction in any plane.Sidelobe suppression and null fill is relative to peak of main beam.Radome color is NCS 2502-B (RAL 7035)(gray).

-40

-35

-30

-25

-20

-15

-10

-5

0

Typical Horizontal and Vertical 7130.18 Patterns

A-8

00-9

5-16

iA

-800

-95-

14i

Page 27: Catalog, Allgon - Swedcom

A-800-110-11.5i

B a s e S t a t i o n A n t e n n a s P a g e 2 9

8 0 0 M H z A l l g o n L o g P e r i o d i c A n t e n n a

-40

-35

-30

-25

-20

-15

-10

-5

0

-40

-35

-30

-25

-20

-15

-10

-5

0

A poster displaying a comparison of antenna patterns has been included at the back of the catalog.

Typical Horizontal and Vertical 7120.20 Patterns Typical Horizontal and Vertical 7120.16 Patterns

For a complete list of released models pertaining to gain, electrical downtilt and connector placement, please

see the quick reference guide on page 22.

80

0 M

Hz A

llgo

n Lo

g P

erio

dic

An

ten

na

Electrical Specifications 7120.20 7120.16(A-800-110-11.5i) (A-800-110-13i)

Gain 9 dBd (11 dBi) 11 dBd (13 dBi)Polarization linear, vertical linear, verticalVSWR, 50Ω <1.5:1 (806 MHz to 824 MHz) <1.5:1 (806 MHz to 824 MHz)VSWR, 50Ω <1.4:1 (824 MHz to 896 MHz) <1.4:1 (824 MHz to 896 MHz)Horizontal 3dB beamwidth 110° 110°Vertical 3dB beamwidth 25° 15°Custom electrical downtilts 0° 0°40 degree cone Front-to-back ratio >25 dB >25 dBSuppression of first upper side lobe >17 dB >18 dBMaximum CW input power 500W 500WTwo tone intermodulation 3rd order <-103 dBm for 2x20W <-103 dBm for 2x20W

(146 dBc at 2x43 dBm) (146 dBc at 2x43 dBm)

Mechanical Specifications

Connector 7/16 DIN or Type N side mountedHeight 31.5" (800 mm) 52" (1320 mm)Width 7.9" (200 mm) 7.9" (200 mm)Depth 11.4" (290 mm) 11.4" (290 mm)Weight 10.1 lbs (4.6 kg) 15.4 lbs (7 kg)Survival wind speed 156 mph (70 m/s) 156 mph (70 m/s)Maximum wind area 2.3 sq.ft (0.21 sq.m) 3.7 sq.ft (0.34 sq.m)Maximum wind load @100mph 60.4 lbf (269 N) 97.2 lbf (433 N)*All metallic components DC grounded for Lightning Protection

Mounting Hardware Options for Installation1) Pole mount 2165.10 2165.102) Combined pole mount/downtilt bracket 7254.10 (-1.5° to +34°) 7254.10 (-1° to +24°)

CommentsGain is typical within frequency band.Front-to-back ratio is defined within 20° from the backwards direction in any plane.Sidelobe suppression and null fill is relative to peak of main beam.Radome color is NCS 2502-B (RAL 7035)(gray).

A-800-110-13i

Page 28: Catalog, Allgon - Swedcom

80

0 M

Hz C

ity P

an

el A

nte

nn

a8 0 0 M H z C i t y P a n e l A n t e n n a

Features

• Unique structure providing a high front-to-back ratio

• Used in: Europe, Africa, Middle East, Asia,South America, and North America.

• Pattern shaping to define Upper LobeSuppression and Lower Null Fill

• Helped pioneer the wide spread use ofvertical pattern shaping for enhancedsystem performance

Design Philosophy

Quality Materials

The Allgon City Panel Antenna has a robustdesign, which yields the same Front-to-Back per-formance as a log periodic through uniquegeometric configuration. The pattern shaping inthe upper lobe suppression and lower null fill isunique and ensures maximum coverage andcontainment. The Allgon City antenna has helpedpioneer the wide spread use of pattern shaping forenhanced system performance.

The Allgon City Panel antenna is composed of UVstabilized PVC radome because of its homoge-neous properties. The City is almost entirelytransparent to RF and yields consistent perfor-mance. The City antenna is made with a heavygauge double back plane, and is assembled bymeans of gas-tight rivets, which reduces assemblytimes and costs. The riveted joints are lesssensitive to vibrations. The radiating elements,structure, and rivets are made of “aircraft" qualityaluminum which provides good conductivity with-out being magnetic. Common alloy selectionfurther ensures good IM suppression.

The City antenna is characterized by well definedvertical opening angles and high gain. Its uniquestructure provides a high Front-to-Back ratio (ashigh as a log periodic) at all opening angles. UpperSide Lobe Suppression is addressed in the Cityantenna design through pattern shaping to reducethe energy going towards the horizon and containthe energy in the desired coverage area. The Cityalso uses Null Fill to ensure coverage below theantenna.

Performance

Bracket hardware for the 800 MHz panel antenna ismade of only the highest quality aircraft aluminumand galvanized stainless steel and is available in nontilt and mechanical tilt for mounting to a pipe. Thewall mounting bracket is integral to the antennaconstruction. For more information, see page 67.

Brackets

7/16 DIN Connector, Type “N” Connector

Connectors

B a s e S t a t i o n A n t e n n a s P a g e 3 0

Allgon prides itself on stringent testing requirementswith conservative, yet realistic claims of the perfor-mance of our product offering. For more informa-tion on testing procedures, see page 68. Our front-to-back ratios are specified for ± 20° from 180°(worst case) compared to 0°.

Testing

Page 29: Catalog, Allgon - Swedcom

B a s e S t a t i o n A n t e n n a s P a g e 3 1

80

0 M

Hz

Cit

y P

an

el

An

ten

na Q U I C K R E F E R E N C E G U I D E

90 Degree 800 MHz Panel

Gain Part Number Description Page

6.5 dBd

9 dBd

10.5 dBd

12 dBd

13 dBd

14.5 dBd

7144.21.33.00 CI-800-90-8.5i-0-D 357144.21.05.00 CI-800-90-8.5i-0-N 35

7144.22.33.00 CI-800-90-11i-0-D 357144.22.05.00 CI-800-90-11i-0-D 35

7144.23.33.00 CI-800-90-12.5i-0-D 367144.23.05.00 CI-800-90-12.5i-0-N 36

7144.24.33.00 CI-800-90-14i-0-D 367144.24.05.00 CI-800-90-14i-0-N 36

7144.26.33.00 CI-800-90-15i-0-D 377144.26.34.00 CI-800-90-15i-0-D-B 37

7144.26.34.00.2 7144.26.34.00 + 37Jumper Cable

7144.26.05.00 CI-800-90-15i-0-N 377144.26.05.10 CI-800-90-15i-10-N 377144.26.33.04 CI-800-90-15i-4-D 377144.26.05.04 CI-800-90-15i-4-N 377144.26.05.06 CI-800-90-15i-6-N 377144.26.33.08 CI-800-90-15i-8-D 377144.26.05.08 CI-800-90-15i-8-N 377144.26.05.09 CI-800-90-15i-9-N 37

7144.48.33.00 CI-800-90-16.5i-0-D 377144.48.05.00 CI-800-90-16.5i-0-N 377144.48.33.02 CI-800-90-16.5i-2-D 377144.48.05.02 CI-800-90-16.5i-2-N 377144.48.33.05 CI-800-90-16.5i-5-D 377144.48.05.05 CI-800-90-16.5i-5-N 37

60 Degree 800 MHz Panel

Gain Part Number Description Page

8 dBd

11 dBd

12 dBd

13.5 dBd

15 dBd

16 dBd

7143.21.33.00 CI-800-60-10i-0-D 327143.21.05.00 CI-800-60-10i-0-N 32

7143.22.33.00 CI-800-60-13i-0-D 327143.22.05.00 CI-800-60-13i-0-N 32

7143.23.33.00 CI-800-60-14i-0-D 337143.23.05.00 CI-800-60-14i-0-N 33

7143.24.33.00 CI-800-60-15.5i-0-D 337143.24.05.00 CI-800-60-15.5i-0-N 337143.24.05.05 CI-800-60-15.5i-5-N 337143.24.05.06 CI-800-60-15.5i-6-N 337143.24.05.09 CI-800-60-15.5i-9-N 33

7143.26.33.00 CI-800-60-17i-0-D 347143.26.34.00 CI-800-60-17i-0-D-B 34

7143.26.34.00.2 7143.26.34.00.2 + 34Jumper Cable

7143.26.05.00 CI-800-60-17i-0-N 347143.26.33.04 CI-800-60-17i-4-D 347143.26.05.04 CI-800-60-17i-4-N 347143.26.05.06 CI-800-60-17i-6-N 347143.26.33.08 CI-800-60-17i-8-D 347143.26.05.08 CI-800-60-17i-8-N 347143.26.05.09 CI-800-60-17i-9-N 34

7143.48.33.00 CI-800-60-18i-0-D 347143.48.05.00 CI-800-60-18i-0-N 347143.48.33.02 CI-800-60-18i-2-D 347143.48.05.02 CI-800-60-18i-2-N 347143.48.33.05 CI-800-60-18i-5-D 347143.48.05.05 CI-800-60-18i-5-N 347143.48.33.06 CI-800-60-18i-6-D 347143.48.05.06 CI-800-60-18i-6-N 34

105 Degree 800 MHz Panel

Gain Part Number Description Page

6 dBd

9 dBd

10.5 dBd

11.5 dBd

12.5 dBd

14 dBd

7145.21.33.00 CI-800-105-8i-0-D 387145.21.05.00 CI-800-105-8i-0-N 38

7145.22.33.00 CI-800-105-11i-0-D 387145.22.05.00 CI-800-105-11i-0-N 38

7145.23.33.00 CI-800-105-12.5i-0-D 397145.23.05.00 CI-800-105-12.5i-0-N 39

7145.24.33.00 CI-800-105-13.5i-0-D 397145.24.05.00 CI-800-105-13.5i-0-N 39

7145.26.33.00 CI-800-105-14.5i-0-D 407145.26.05.00 CI-800-105-14.5i-0-N 40

7145.48.33.00 CI-800-105-16i-0-D 407145.48.05.00 CI-800-105-16i-0-N 407145.48.33.05 CI-800-105-16i-5-D 407145.48.05.05 CI-800-105-16i-5-N 40

120 Degree 800 MHz Panel

Gain Part Number Description Page

5.5 dBd

8.5 dBd

9.5 dBd

10.5 dBd

12.5 dBd

12 dBd

13.5 dBd

7146.21.33.00 CI-800-120-7.5i-0-D 417146.21.05.00 CI-800-120-7.5i-0-N 41

7146.22.33.00 CI-800-120-10.5i-0-D 417146.22.05.00 CI-800-120-10.5i-0-N 41

7146.23.33.00 CI-800-120-11.5i-0-D 427146.23.05.00 CI-800-120-11.5i-0-N 42

7146.24.33.00 CI-800-120-12.5i-0-D 427146.24.05.00 CI-800-120-12.5i-0-N 42

7146.26.33.00 CI-800-120-14.5i-0-D 437146.26.05.00 CI-800-120-14.5i-0-N 437146.26.34.00 CI-800-120-14.5i-0-D-B 437146.26.33.02 CI-800-120-14.5i-2-D 43

7146.26.33.06 CI-800-120-14i-6-D 437146.26.05.06 CI-800-120-14i-6-N 437146.26.33.08 CI-800-120-14i-8-D 437146.26.05.08 CI-800-120-14i-8-N 43

7146.48.33.00 CI-800-120-15.5i-0-D 437146.48.05.00 CI-800-120-15.5i-0-N 437146.48.34.00 CI-800-120-15.5i-0-D-B

C I - 8 0 0 - 9 0 - 1 4 i - 0 - D7/16 DINConnector

Description Detail:

CityPanelFamily

FrequencyBand

HorizontalBeamwidth

Electrical DowntiltAngleGain

in dBi

A trailing B indicates connector placement on the back panel, no B indicates connector placement on the bottom.

Antennas may be ordered using part number or description.

Page 30: Catalog, Allgon - Swedcom

B a s e S t a t i o n A n t e n n a s P a g e 3 2

8 0 0 M H z C i t y P a n e l A n t e n n a

-40

-35

-30

-25

-20

-15

-10

-5

0

-40

-35

-30

-25

-20

-15

-10

-5

0

A poster displaying a comparison of antenna patterns has been included at the back of the catalog.

Typical Horizontal and Vertical 7143.21 Patterns Typical Horizontal and Vertical 7143.22 Patterns

For a complete list of released models pertaining to gain, electrical downtilt and connector placement,

please see the quick reference guide on page 31.

80

0 M

Hz C

ity P

an

el A

nte

nn

aCI-800-60-13i

Electrical Specifications 7143.21 7143.22(CI-800-60-10i) (CI-800-60-13i)

Gain 8 dBd (10 dBi) 11 dBd ( 13 dBi ) Polarization linear, vertical linear, verticalVSWR, 50Ω <1.4:1 (806 MHz to 869 MHz) <1.4:1 (806 MHz to 869 MHz)VSWR, 50Ω <1.2:1 (869 MHz to 896 MHz) <1.2:1 (869 MHz to 896 MHz)Horizontal 3dB beamwidth 60° 60°

Vertical 3dB beamwidth 65° 30°Custom electrical downtilts 0° 0°40 degree cone Front-to-back ratio >30 dB >30 dBSuppression of first upper side lobe N/A >16Maximum CW input power 300W 500WTwo tone intermodulation 3rd order <-103 dBm for 2x20W <-103 dBm for 2x20W

(146 dBc at 2x43 dBm) (146 dBc at 2x43 dBm)

Mechanical Specifications

Connector 7/16 DIN or Type N on bottomHeight 11.8" (300 mm) 23.6" (600 mm)Width 11.8" (300 mm) 11.8" (300 mm)Depth 5.1" (130 mm) 5.1" (130 mm)Weight 5.1 lbs (2.3 kg) 11.1 lbs (5 kg)Survival wind speed 156 mph (70 m/s) 156 mph (70 m/s)Maximum wind area 0.97 sq.ft (0.09 sq.m) 1.9 sq.ft (0.18 sq.m)Frontal wind load @100mph (C=1) 25.5 lbf (113 N) 50.9 lbf (227 N)*All metallic components DC grounded for Lightning Protection

Mounting Hardware Options for Installation1) Pole mount 2165.10 2165.102) Combined pole mount/downtilt bracket 7254.10 (-2.5° to +64°) 7254.10 (-1.4° to +32°)

CommentsGain is typical within frequency band.Front-to-back ratio is defined within 20° from the backwards direction in any plane.Sidelobe suppression and null fill is relative to peak of main beam.Radome color is NCS 2502-B (RAL 7035)(gray).

CI-800-60-10i

Page 31: Catalog, Allgon - Swedcom

CI-8

00-6

0-14

i

B a s e S t a t i o n A n t e n n a s P a g e 3 3

8 0 0 M H z C i t y P a n e l A n t e n n a

A poster displaying a comparison of antenna patterns has been included at the back of the catalog.

For a complete list of released models pertaining to gain, electrical downtilt and connector placement,

please see the quick reference guide on page 31.

80

0 M

Hz

Cit

y P

an

el

An

ten

na

CI-8

00-6

0-15

.5i

-40

-35

-30

-25

-20

-15

-10

-5

0

-40

-35

-30

-25

-20

-15

-10

-5

0

Typical Horizontal and Vertical 7143.23 Patterns Typical Horizontal and Vertical 7143.24 Patterns

Electrical Specifications 7143.23 7143.24(CI-800-60-14i) (CI-800-60-15.5i)

Gain 12 dBd (14 dBi) 13.5 dBd (15.5 dBi)Polarization linear, vertical linear, verticalVSWR, 50Ω <1.4:1 (806 MHz to 869 MHz) <1.4:1 (806 MHz to 869 MHz)VSWR, 50Ω <1.2:1 (869 MHz to 896 MHz) <1.2:1 (869 MHz to 896 MHz)Horizontal 3dB beamwidth 60° 60°Vertical 3dB beamwidth 24° 16°Custom electrical downtilts 0° 0°, 5°, 6°, & 9°40 degree cone Front-to-back ratio >30 dB >30 dBSuppression of first upper side lobe >18 dB >18 dBFirst lower null fill >-28 dB >-21 dBMaximum CW input power 500W 500WTwo tone intermodulation 3rd order <-103 dBm for 2x20W <-103 dBm for 2x20W

(146 dBc at 2x43 dBm) (146 dBc at 2x43 dBm)

Mechanical Specifications

Connector 7/16 DIN or Type N on bottomHeight 35.4" (900 mm) 47.2" (1200 mm)Width 11.8" (300 mm) 11.8" (300 mm)Depth 5.1" (130 mm) 5.1" (130 mm)Weight 15.9 lbs (7.2 kg) 21 lbs (9.5 kg)Survival wind speed 156 mph (70 m/s) 156 mph (70 m/s)Maximum wind area 2.9 sq.ft (0.27 sq.m) 3.9 sq.ft (0.36 sq.m)Frontal wind load @100mph (C=1) 76.4 lbf (340 N) 102 lbf (453 N)*All metallic components DC grounded for Lightning Protection

Mounting Hardware Options for Installation1) Pole mount 2165.10 2165.102) Combined pole mount/downtilt bracket 7254.10 (-1° to +22°) 7254.10 (-0.7° to +16°)

CommentsGain is typical within frequency band.Front-to-back ratio is defined within 20° from the backwards direction in any plane.Sidelobe suppression and null fill is relative to peak of main beam.Radome color is NCS 2502-B (RAL 7035)(gray).

Page 32: Catalog, Allgon - Swedcom

CI-800-60-17i

B a s e S t a t i o n A n t e n n a s P a g e 3 4

8 0 0 M H z C i t y P a n e l A n t e n n a

-40

-35

-30

-25

-20

-15

-10

-5

0

-40

-35

-30

-25

-20

-15

-10

-5

0

A poster displaying a comparison of antenna patterns has been included at the back of the catalog.

Typical Horizontal and Vertical 7143.26 Patterns Typical Horizontal and Vertical 7143.48 Patterns

For a complete list of released models pertaining to gain, electrical downtilt and connector placement,

please see the quick reference guide on page 31.

80

0 M

Hz C

ity P

an

el A

nte

nn

aCI-800-60-18i

Electrical Specifications 7143.26 7143.48(CI-800-60-17i) (CI-800-60-18i)

Gain 15 dBd (17 dBi) 16 dBd (18 dBi)Polarization linear, vertical linear, verticalVSWR, 50Ω <1.4:1 (806 MHz to 869 MHz) <1.4:1 (806 MHz to 869 MHz)VSWR, 50Ω <1.2:1 (869 MHz to 896 MHz) <1.2:1 (869 MHz to 896 MHz)Horizontal 3dB beamwidth 60° 60°Vertical 3dB beamwidth 11° 7°Custom electrical downtilts 0°, 4°, 6°, 8°, & 9° 0°, 2°, 5°, & 6°40 degree cone Front-to-back ratio >30 dB >30 dBSuppression of first upper side lobe >18 dB >17 dBFirst lower null fill >-12 dB N/AMaximum CW input power 500W 500WTwo tone intermodulation 3rd order <-103 dBm for 2x20W <-103 dBm for 2x20W

(146 dBc at 2x43 dBm) (146 dBc at 2x43 dBm)

Mechanical Specifications

Connector 7/16 DIN or Type N on bottom/or 7/16 DIN on back 7/16 DIN or Type N on bottomHeight 70.9" (1800 mm) 90.5" (2300 mm)Width 11.8" (300 mm) 11.8" (300 mm)Depth 5.1" (130 mm) 5.1" (130 mm)Weight 30.9 lbs (14 kg) 37.5 lbs (17 kg)Survival wind speed 156 mph (70 m/s) 156 mph (70 m/s)Maximum wind area 5.8 sq.ft (0.54 sq.m) 7.4 sq.ft (0.69 sq.m)Frontal wind load @100mph (C=1) 153 lbf (680 N) 195 lbf (868 N)*All metallic components DC grounded for Lightning Protection

Mounting Hardware Options for Installation1) Pole mount 2165.10 2165.102) Combined pole mount/downtilt bracket 7254.10 (-0.5° to +11°) 7254.10 (-0.4° to +8°)

CommentsGain is typical within frequency band.Front-to-back ratio is defined within 20° from the backwards direction in any plane.Sidelobe suppression and null fill is relative to peak of main beam.Radome color is NCS 2502-B (RAL 7035)(gray).

Page 33: Catalog, Allgon - Swedcom

CI-8

00-9

0-8.

5i

B a s e S t a t i o n A n t e n n a s P a g e 3 5

8 0 0 M H z C i t y P a n e l A n t e n n a

A poster displaying a comparison of antenna patterns has been included at the back of the catalog.

For a complete list of released models pertaining to gain, electrical downtilt and connector placement,

please see the quick reference guide on page 31.

80

0 M

Hz

Cit

y P

an

el

An

ten

na

CI-8

00-9

0-11

i

-40

-35

-30

-25

-20

-15

-10

-5

0

-40

-35

-30

-25

-20

-15

-10

-5

0

Typical Horizontal and Vertical 7144.21 Patterns Typical Horizontal and Vertical 7144.22 Patterns

Electrical Specifications 7144.21 7144.22(CI-800-90-8.5i) (CI-800-90-11i)

Gain 6.5 dBd (8.5 dBi) 9 dBd (11 dBi)Polarization linear, vertical linear, verticalVSWR, 50Ω <1.4:1 (806 MHz to 869 MHz) <1.4:1 (806 MHz to 869 MHz)VSWR, 50Ω <1.2:1 (869 MHz to 896 MHz) <1.2:1 (869 MHz to 896 MHz)Horizontal 3dB beamwidth 90° 90°Vertical 3dB beamwidth 65° 30°Custom electrical downtilts 0° 0°40 degree cone Front-to-back ratio >28 dB >28 dBSuppression of first upper side lobe N/A >16 dBMaximum CW input power 300W 500WTwo tone intermodulation 3rd order <-103 dBm for 2x20W <-103 dBm for 2x20W

(146 dBc at 2x43 dBm) (146 dBc at 2x43 dBm)

Mechanical Specifications

Connector 7/16 DIN or Type N on bottomHeight 11.8" (300 mm) 23.6" (600 mm)Width 11.8" (300 mm) 11.8" (300 mm)Depth 5.1" (130 mm) 5.1" (130 mm)Weight 5.1 lbs (2.3 kg) 11 lbs (5 kg)Survival wind speed 156 mph (70 m/s) 156 mph (70 m/s)Maximum wind area 0.97 sq.ft (0.09 sq.m) 1.9 sq.ft (0.18 sq.m)Frontal wind load @100mph (C=1) 25.5 lbf (113 N) 50.9 lbf (227 N)*All metallic components DC grounded for Lightning Protection

Mounting Hardware Options for Installation1) Pole mount 2165.10 2165.102) Combined pole mount/downtilt bracket 7254.10 (-2.5° to +64°) 7254.10 (-1.4° to +32°)

CommentsGain is typical within frequency band.Front-to-back ratio is defined within 20° from the backwards direction in any plane.Sidelobe suppression and null fill is relative to peak of main beam.Radome color is NCS 2502-B (RAL 7035)(gray).

Page 34: Catalog, Allgon - Swedcom

CI-800-90-12.5i

B a s e S t a t i o n A n t e n n a s P a g e 3 6

8 0 0 M H z C i t y P a n e l A n t e n n a

-40

-35

-30

-25

-20

-15

-10

-5

0

-40

-35

-30

-25

-20

-15

-10

-5

0

A poster displaying a comparison of antenna patterns has been included at the back of the catalog.

Typical Horizontal and Vertical 7144.23 Patterns Typical Horizontal and Vertical 7144.24 Patterns

For a complete list of released models pertaining to gain, electrical downtilt and connector placement,

please see the quick reference guide on page 31.

80

0 M

Hz C

ity P

an

el A

nte

nn

aCI-800-90-14i

Electrical Specifications 7144.23 7144.24(CI-800-90-12.5i) (CI-800-90-14i)

Gain 10.5 dBd (12.5 dBi) 12 dBd (14 dBi)Polarization linear, vertical linear, verticalVSWR, 50Ω <1.4:1 (806 MHz to 869 MHz) <1.4:1 (806 MHz to 869 MHz)VSWR, 50Ω <1.2:1 (869 MHz to 896 MHz) <1.2:1 (869 MHz to 896 MHz)Horizontal 3dB beamwidth 90° 90°Vertical 3dB beamwidth 24° 16°Custom electrical downtilts 0° 0°40 degree cone Front-to-back ratio >28 dB >28 dBSuppression of first upper side lobe >18 dB >18 dBFirst lower null fill >-28 dB >-21 dBMaximum CW input power 500W 500WTwo tone intermodulation 3rd order < -103 dBm for 2x20W <-103 dBm for 2x20W

(146 dBc at 2x43 dBm) (146 dBc at 2x43 dBm)

Mechanical Specifications

Connector 7/16 DIN or Type N on bottomHeight 35.4" (900 mm) 47.2" (1200 mm)Width 11.8" (300 mm) 11.8" (300 mm)Depth 5.1" (130 mm) 5.1" (130 mm)Weight 15.9 lbs (7.2 kg) 21 lbs (9.5 kg)Survival wind speed 156 mph (70 m/s) 156 mph (70 m/s)Maximum wind area 2.9 sq.ft (0.27 sq.m) 3.9 sq.ft (0.36 sq.m)Frontal wind load @100mph (C=1) 76.4 lbf (340 N) 102 lbf (453 N)*All metallic components DC grounded for Lightning Protection

Mounting Hardware Options for Installation1) Pole mount 2165.10 2165.102) Combined pole mount/downtilt bracket 7254.10 (-1° to +22°) 7254.10 (-0.7° to +16°)

CommentsGain is typical within frequency band.Front-to-back ratio is defined within 20° from the backwards direction in any plane.Sidelobe suppression and null fill is relative to peak of main beam.Radome color is NCS 2502-B (RAL 7035)(gray).

Page 35: Catalog, Allgon - Swedcom

CI-8

00-9

0-15

i

B a s e S t a t i o n A n t e n n a s P a g e 3 7

8 0 0 M H z C i t y P a n e l A n t e n n a

A poster displaying a comparison of antenna patterns has been included at the back of the catalog.

For a complete list of released models pertaining to electrical downtilt and connector placement,

please see the quick reference guide on page 31.

80

0 M

Hz

Cit

y P

an

el

An

ten

na

CI-8

00-9

0-16

.5i

-40

-35

-30

-25

-20

-15

-10

-5

0

-40

-35

-30

-25

-20

-15

-10

-5

0

Typical Horizontal and Vertical 7144.26 Patterns Typical Horizontal and Vertical 7144.48 Patterns

Electrical Specifications 7144.26 7144.48(CI-800-90-15i) (CI-800-90-16.5i)

Gain 13 dBd (15 dBi) 14.5 dBd (16.5 dBi) Polarization linear, vertical linear, verticalVSWR, 50Ω <1.4:1 (806 MHz to 869 MHz) <1.4:1 (806 MHz to 869 MHz)VSWR, 50Ω <1.2:1 (869 MHz to 896 MHz) <1.2:1 (869 MHz to 896 MHz)Horizontal 3dB beamwidth 90° 90°Vertical 3dB beamwidth 11° 7°Custom electrical downtilts 0°, 4°, 6°, 8°, 9°, & 10° 0°, 2°, & 5°40 degree cone Front-to-back ratio >28 dB >28 dBSuppression of first upper side lobe >18 dB >17 dBFirst lower null fill >-12 dB N/AMaximum CW input power 500W 500WTwo tone intermodulation 3rd order <-103 dBm for 2x20W <-103 dBm for 2x20W

(146 dBc at 2x43 dBm) (146 dBc at 2x43 dBm)

Mechanical Specifications

Connector 7/16 DIN or Type N on bottom/or 7/16 DIN on back 7/16 DIN or Type N on bottomHeight 70.9" (1800 mm) 90.5" (2300 mm)Width 11.8" (300 mm) 11.8" (300 mm)Depth 5.1" (130 mm) 5.1" (130 mm)Weight 30.9 lbs (14 kg) 37.5 lbs (17 kg)Survival wind speed 156 mph (70 m/s) 156 mph (70 m/s)Maximum wind area 5.8 sq.ft (0.54 sq.m) 7.4 sq.ft (0.69 sq.m)Frontal wind load @100mph (C=1) 153 lbf (680 N) 195 lbf (868 N)*All metallic components DC grounded for Lightning Protection

Mounting Hardware Options for Installation1) Pole mount 2165.10 2165.102) Combined pole mount/downtilt bracket 7254.10 (-0.5° to +11°) 7254.10 (-0.4° to +8°)

CommentsGain is typical within frequency band.Front-to-back ratio is defined within 20° from the backwards direction in any plane.Sidelobe suppression and null fill is relative to peak of main beam.Radome color is NCS 2502-B (RAL 7035)(gray).

Page 36: Catalog, Allgon - Swedcom

B a s e S t a t i o n A n t e n n a s P a g e 3 8

8 0 0 M H z C i t y P a n e l A n t e n n a

-40

-35

-30

-25

-20

-15

-10

-5

0

-40

-35

-30

-25

-20

-15

-10

-5

0

A poster displaying a comparison of antenna patterns has been included at the back of the catalog.

Typical Horizontal and Vertical 7145.21 Patterns Typical Horizontal and Vertical 7145.22 Patterns

For a complete list of released models pertaining to gain, electrical downtilt and connector placement,

please see the quick reference guide on page 31.

80

0 M

Hz C

ity P

an

el A

nte

nn

aCI-800-105-11i

Electrical Specifications 7145.21 7145.22(CI-800-105-8i) (CI-800-105-11i)

Gain 6 dBd (8 dBi) 9 dBd (11 dBi)Polarization linear, vertical linear, verticalVSWR, 50Ω <1.4:1 (806 MHz to 869 MHz) <1.4:1 (806 MHz to 869 MHz)VSWR, 50Ω <1.2:1 (869 MHz to 896 MHz) <1.2:1 (869 MHz to 896 MHz)Horizontal 3dB beamwidth 105° 105°Vertical 3dB beamwidth 65° 30°Custom electrical downtilts 0° 0°40 degree cone Front-to-back ratio >25 dB >25 dBSuppression of first upper side lobe N/A >16 dBMaximum CW input power 300W 500WTwo tone intermodulation 3rd order <-103 dBm for 2x20W <-103 dBm for 2x20W

(146 dBc at 2x43 dBm) (146 dBc at 2x43 dBm)

Mechanical Specifications

Connector 7/16 DIN or Type N on bottomHeight 11.8" (300 mm) 23.6" (600 mm)Width 11.8" (300 mm) 11.8" (300 mm)Depth 5.1" (130 mm) 5.1" (130 mm)Weight 5.1 lbs (2.3 kg) 11.1 lbs (5 kg)Survival wind speed 156 mph (70 m/s) 156 mph (70 m/s)Maximum wind area 0.97 sq.ft (0.09 sq.m) 1.9 sq.ft (0.18 sq.m)Frontal wind load @100mph (C=1) 25.5 lbf (113 N) 50.9 lbf (227 N)*All metallic components DC grounded for Lightning Protection

Mounting Hardware Options for Installation1) Pole mount 2165.10 2165.102) Combined pole mount/downtilt bracket 7254.10 (-2.5° to +64°) 7254.10 (-1.4° to +32°)

CommentsGain is typical within frequency band.Front-to-back ratio is defined within 20° from the backwards direction in any plane.Sidelobe suppression and null fill is relative to peak of main beam.Radome color is NCS 2502-B (RAL 7035)(gray).

CI-800-105-8i

Page 37: Catalog, Allgon - Swedcom

CI-8

00-1

05-1

2.5i

B a s e S t a t i o n A n t e n n a s P a g e 3 9

8 0 0 M H z C i t y P a n e l A n t e n n a

A poster displaying a comparison of antenna patterns has been included at the back of the catalog.

For a complete list of released models pertaining to gain, electrical downtilt and connector placement,

please see the quick reference guide on page 31.

80

0 M

Hz

Cit

y P

an

el

An

ten

na

CI-8

00-1

05-1

3.5i

-40

-35

-30

-25

-20

-15

-10

-5

0

-40

-35

-30

-25

-20

-15

-10

-5

0

Typical Horizontal and Vertical 7145.23 Patterns Typical Horizontal and Vertical 7145.24 Patterns

Electrical Specifications 7145.23 7145.24(CI-800-105-12.5i) (CI-800-105-13.5i)

Gain 10.5 dBd (12.5 dBi) 11.5 dBd (13.5 dBi) Polarization linear, vertical linear, verticalVSWR, 50Ω <1.4:1 (806 MHz to 869 MHz) <1.4:1 (806 MHz to 869 MHz)VSWR, 50Ω <1.2:1 (869 MHz to 896 MHz) <1.2:1 (869 MHz to 896 MHz)Horizontal 3dB beamwidth 105° 105°Vertical 3dB beamwidth 24° 16°Custom electrical downtilts 0° 0°40 degree cone Front-to-back ratio >25 dB >25 dBSuppression of first upper side lobe >18 dB >18 dBFirst lower null fill >-28 dB >-21 dBMaximum CW input power 500W 500WTwo tone intermodulation 3rd order <-103 dBm for 2x20W <-103 dBm for 2x20W

(146 dBc at 2x43 dBm) (146 dBc at 2x43 dBm)

Mechanical Specifications

Connector 7/16 DIN or Type N on bottomHeight 35.4" (900 mm) 47.2" (1200 mm)Width 11.8" (300 mm) 11.8" (300 mm)Depth 5.1" (130 mm) 5.1" (130 mm)Weight 15.9 lbs (7.2 kg) 21 lbs (9.5 kg)Survival wind speed 156 mph (70 m/s) 156 mph (70 m/s)Maximum wind area 2.9 sq.ft (0.27 sq.m) 3.9 sq.ft (0.36 sq.m)Frontal wind load @100mph (C=1) 76.4 lbf (340 N) 102 lbf (453 N)*All metallic components DC grounded for Lightning Protection

Mounting Hardware Options for Installation1) Pole mount 2165.10 2165.102) Combined pole mount/downtilt bracket 7254.10 (-1° to +22°) 7254.10 (-0.7° to +16°)

CommentsGain is typical within frequency band.Front-to-back ratio is defined within 20° from the backwards direction in any plane.Sidelobe suppression and null fill is relative to peak of main beam.Radome color is NCS 2502-B (RAL 7035)(gray).

Page 38: Catalog, Allgon - Swedcom

B a s e S t a t i o n A n t e n n a s P a g e 4 0

8 0 0 M H z C i t y P a n e l A n t e n n a

-40

-35

-30

-25

-20

-15

-10

-5

0

-40

-35

-30

-25

-20

-15

-10

-5

0

A poster displaying a comparison of antenna patterns has been included at the back of the catalog.

Typical Horizontal and Vertical 7145.26 Patterns Typical Horizontal and Vertical 7145.48 Patterns

For a complete list of released models pertaining to gain, electrical downtilt and connector placement,

please see the quick reference guide on page 31.

Electrical Specifications 7145.26 7145.48(CI-800-105-14.5i) (CI-800-105-16i)

Gain 12.5 dBd (14.5 dBi) 14 dBd (16 dBi) Polarization linear, vertical linear, verticalVSWR, 50Ω <1.4:1 (806 MHz to 869 MHz) <1.4:1 (806 MHz to 869 MHz)VSWR, 50Ω <1.2:1 (869 MHz to 896 MHz) <1.2:1 (869 MHz to 896 MHz)Horizontal 3dB beamwidth 105° 105°Vertical 3dB beamwidth 11° 7°Custom electrical downtilts 0° 0° & 5°40 degree cone Front-to-back ratio >25 dB >25 dBSuppression of first upper side lobe >18 dB >17 dBFirst lower null fill >-12 dB N/AMaximum CW input power 500W 500WTwo tone intermodulation 3rd order <-103 dBm for 2x20W <-103 dBm for 2x20W

(146 dBc at 2x43 dBm) (146 dBc at 2x43 dBm)

Mechanical Specifications

Connector 7/16 DIN or Type N on bottomHeight 70.9" (1800 mm) 90.5" (2300 mm)Width 11.8" (300 mm) 11.8" (300 mm)Depth 5.1" (130 mm) 5.1" (130 mm)Weight 30.9 lbs (14 kg) 37.5 lbs (17 kg)Survival wind speed 156 mph (70 m/s) 156 mph (70 m/s)Maximum wind area 5.8 sq.ft (0.54 sq.m) 7.4 sq.ft (0.69 sq.m)Frontal wind load @100mph (C=1) 153 lbf (680 N) 195 lbf (868 N)*All metallic components DC grounded for Lightning Protection

Mounting Hardware Options for Installation1) Pole mount 2165.10 2165.102) Combined pole mount/downtilt bracket 7254.10 (-0.5° to +11°) 7254.10 (-0.4° to +8°)

CommentsGain is typical within frequency band.Front-to-back ratio is defined within 20° from the backwards direction in any plane.Sidelobe suppression and null fill is relative to peak of main beam.Radome color is NCS 2502-B (RAL 7035)(gray).

80

0 M

Hz C

ity P

an

el A

nte

nn

aCI-800-105-16i

CI-800-105-14.5i

Page 39: Catalog, Allgon - Swedcom

B a s e S t a t i o n A n t e n n a s P a g e 4 1

8 0 0 M H z C i t y P a n e l A n t e n n a

A poster displaying a comparison of antenna patterns has been included at the back of the catalog.

For a complete list of released models pertaining to gain, electrical downtilt and connector placement,

please see the quick reference guide on page 31.

-40

-35

-30

-25

-20

-15

-10

-5

0

-40

-35

-30

-25

-20

-15

-10

-5

0

Typical Horizontal and Vertical 7146.21 Patterns Typical Horizontal and Vertical 7146.22 Patterns

Electrical Specifications 7146.21 7146.22(CI-800-120-7.5i) (CI-800-120-10.5i)

Gain 5.5 dBd (7.5 dBi) 8.5 dBd (10.5 dBi)Polarization linear, vertical linear, verticalVSWR, 50Ω <1.4:1 (806 MHz to 869 MHz) <1.4:1 (806 MHz to 869 MHz)VSWR, 50Ω <1.2:1 (869 MHz to 896 MHz) <1.2:1 (869 MHz to 896 MHz)Horizontal 3dB beamwidth 120° 120°Vertical 3dB beamwidth 65° 30°Custom electrical downtilts 0° 0°40 degree cone Front-to-back ratio >25 dB >25 dBSuppression of first upper side lobe N/A >16 dBMaximum CW input power 300W 500WTwo tone intermodulation 3rd order <-103 dBm for 2x20W <-103 dBm for 2x20W

(146 dBc at 2x43 dBm) (146 dBc at 2x43 dBm)

Mechanical Specifications

Connector 7/16 DIN or Type N on bottomHeight 11.8" (300 mm) 23.6" (600 mm)Width 11.8" (300 mm) 11.8" (300 mm)Depth 5.1" (130 mm) 5.1" (130 mm)Weight 5.1 lbs (2.3 kg) 11 lbs (5 kg)Survival wind speed 156 mph (70 m/s) 156 mph (70 m/s)Maximum wind area 0.97 sq.ft (0.09 sq.m) 1.9 sq.ft (0.09 sq.m)Frontal wind load @100mph (C=1) 25.5 lbf (113 N) 50.9 lbf (227 N)*All metallic components DC grounded for Lightning Protection

Mounting Hardware Options for Installation1) pole mount 2165.10 2165.102) combined pole mount/downtilt bracket 7254.10 (-2.5° to +64°) 7254.10 (-1.4° to +32°)

CommentsGain is typical within frequency band.Front-to-back ratio is defined within 20° from the backwards direction in any plane.Sidelobe suppression and null fill is relative to peak of main beam.Radome color is NCS 2502-B (RAL 7035)(gray).

CI-8

00-1

20-7

.5i

80

0 M

Hz

Cit

y P

an

el

An

ten

na

CI-8

00-1

20-1

0.5i

Page 40: Catalog, Allgon - Swedcom

B a s e S t a t i o n A n t e n n a s P a g e 4 2

8 0 0 M H z C i t y P a n e l A n t e n n a

-40

-35

-30

-25

-20

-15

-10

-5

0

-40

-35

-30

-25

-20

-15

-10

-5

0

A poster displaying a comparison of antenna patterns has been included at the back of the catalog.

Typical Horizontal and Vertical 7146.23 Patterns Typical Horizontal and Vertical 7146.24 Patterns

For a complete list of released models pertaining to gain, electrical downtilt and connector placement,

please see the quick reference guide on page 31.

80

0 M

Hz C

ity P

an

el A

nte

nn

aCI-800-120-12.5i

Electrical Specifications 7146.23 7146.24(CI-800-120-11.5i) (CI-800-120-12.5i)

Gain 9.5 dBd (11.5 dBi) 10.5 dBd (12.5 dBi)Polarization linear, vertical linear, verticalVSWR, 50Ω <1.4:1 (806 MHz to 869 MHz) <1.4:1 (806 MHz to 869 MHz)VSWR, 50Ω <1.2:1 (869 MHz to 896 MHz) <1.2:1 (869 MHz to 896 MHz)Horizontal 3dB beamwidth 120° 120°Vertical 3dB beamwidth 24° 16°Custom electrical downtilts 0° 0°40 degree cone Front-to-back ratio >25 dB >25 dBSuppression of first upper side lobe >18 dB >18 dBFirst lower null fill >-28 dB >-21 dBMaximum CW input power 500W 500WTwo tone intermodulation 3rd order <-103 dBm for 2x20W <-103 dBm for 2x20W

(146 dBc at 2x43 dBm) (146 dBc at 2x43 dBm)

Mechanical Specifications

Connector 7/16 DIN or Type N on bottomHeight 35.4" (900 mm) 47.2" (1200 mm)Width 11.8" (300 mm) 11.8" (300 mm)Depth 5.1" (130 mm) 5.1" (130 mm)Weight 15.9 lbs (7.2 kg) 21 lbs (9.5 kg)Survival wind speed 156 mph (70 m/s) 156 mph (70 m/s)Maximum wind area 2.9 sq.ft (0.27 sq.m) 3.9 sq.ft (0.36 sq.m)Frontal wind load @100mph (C=1) 76.4 lbf (340 N) 102 lbf (453 N)*All metallic components DC grounded for Lightning Protection

Mounting Hardware Options for Installation1) Pole mount 2165.10 2165.102) Combined pole mount/downtilt bracket 7254.10 (-1° to +22°) 7254.10 (-0.7° to +16°)

CommentsGain is typical within frequency band.Front-to-back ratio is defined within 20° from the backwards direction in any plane.Sidelobe suppression and null fill is relative to peak of main beam.Radome color is NCS 2502-B (RAL 7035)(gray).

CI-800-120-11.5i

Page 41: Catalog, Allgon - Swedcom

B a s e S t a t i o n A n t e n n a s P a g e 4 3

8 0 0 M H z C i t y P a n e l A n t e n n a

A poster displaying a comparison of antenna patterns has been included at the back of the catalog.

For a complete list of released models pertaining to gain, electrical downtilt and connector placement,

please see the quick reference guide on page 31.

-40

-35

-30

-25

-20

-15

-10

-5

0

-40

-35

-30

-25

-20

-15

-10

-5

0

Typical Horizontal and Vertical 7146.26 Patterns Typical Horizontal and Vertical 7146.48 Patterns

Electrical Specifications 7146.26 7146.48(CI-800-120-14.5i) (CI-800-120-15.5i)

Gain 12.5 dBd (14.5 dBi) 13.5 dBd (15.5 dBi)Polarization linear, vertical linear, verticalVSWR, 50Ω <1.4:1 (806 MHz to 869 MHz) <1.4:1 (806 MHz to 869 MHz)VSWR, 50Ω <1.2:1 (869 MHz to 896 MHz) <1.2:1 (869 MHz to 896 MHz)Horizontal 3dB beamwidth 120° 120°Vertical 3dB beamwidth 11° 7°Custom electrical downtilts 0°, 6°, & 8° 0°40 degree cone Front-to-back ratio >25 dB > 25 dBSuppression of first upper side lobe >18 dB >17 dBFirst lower null fill >-12 dB N/AMaximum CW input power 500W 500WTwo tone intermodulation 3rd order <-103 dBm for 2x20W <-103 dBm for 2x20W

(146 dBc at 2x43 dBm) (146 dBc at 2x43 dBm)

Mechanical Specifications

Connector 7/16 DIN or Type N on bottom/or 7/16 DIN on backHeight 70.9" (1800 mm) 90.5" (2300 mm)Width 11.8" (300 mm) 11.8" (300 mm)Depth 5.1" (130 mm) 5.1" (130 mm)Weight 30.9 lbs (14 kg) 37.5 lbs (17 kg)Survival wind speed 156 mph (70 m/s) 156 mph (70 m/s)Maximum wind area 5.8 sq.ft (0.54 sq.m) 7.4 sq.ft (0.69 sq.m)Frontal wind load @100mph (C=1) 153 lbf (680 N) 195 lbf (868 N)*All metallic components DC grounded for Lightning Protection

Mounting Hardware Options for Installation1) Pole mount 2165.10 2165.102) Combined pole mount/downtilt bracket 7254.10 (-0.5° to +11°) 7254.10 (-0.4° to + 8°)

CommentsGain is typical within frequency band.Front-to-back ratio is defined within 20° from the backwards direction in any plane.Sidelobe suppression and null fill is relative to peak of main beam.Radome color is NCS 2502-B (RAL 7035)(gray).

CI-8

00-1

20-1

4.5i

80

0 M

Hz

Cit

y P

an

el

An

ten

na

CI-8

00-1

20-1

5.5i

Page 42: Catalog, Allgon - Swedcom

80

0 M

Hz A

dju

stab

le Ele

ctrical

Do

wn

tilt City

Pa

ne

l An

ten

na

8 0 0 M H z A d j u s t a b l e E l e c t r i c a lD o w n t i l t C i t y P a n e l A n t e n n a

B a s e S t a t i o n A n t e n n a s P a g e 4 4

Features

• Field adjustable from 0 to 17 degrees in one degree increments

• Can be implemented without downtilt brackets – improved aesthetics

• Innovative patented design

• Aesthetically pleasing to address zoning issues

Design Philosophy

Quality Materials

The Allgon Adjustable Electrical DowntiltAntenna has a robust design, which yields thesame Front-to-Back performance as a log periodicthrough unique geometric configuration. Thepattern shaping in the upper lobe suppression isunique and ensures maximum coverage andcontainment. The Allgon 800 MHz panel antennahas helped pioneer the wide spread use of patternshaping for enhanced system performance.

The Allgon City AEDT Panel antenna is composedof UV stabilized PVC radome because of its ho-mogenous properties. The radome is almostentirely transparent to RF and yields consistentperformance. The City antenna is made with aheavy gauge double back plane, and is assembledby means of gas-tight rivets, which reducesassembly times and costs. The riveted joints areless sensitive to vibrations. The radiating element,structure and rivets are made of “Aircraft" qualityaluminum which provides good conductivity with-out being magnetic. Common alloy furtherensures good IM suppression.

The City AEDT antenna is characterized by welldefined vertical opening angles and high gain. Itsunique structure provides a high Front-to-Backratio (as high as a log periodic) at all openingangles. Upper Side Lobe Suppression is addressedin the City antenna design through patternshaping to reduce the energy going towards thehorizon and contain the energy in the desiredcoverage area.

Performance

Bracket hardware for the 800 MHz panelantenna is made of only the highest qualityaircraft aluminum and galvanized stainless steel,and is available for non-tilt and mechanical tilt formounting to a pipe. The wall mounting bracket isintegral to the antenna construction. For more in-formation, see page 67.

Brackets

7/16 DIN Connector, Type “N” Connector

Connectors

Allgon prides itself on stringent testing require-ments with conservative, yet realistic claims of theperformance of our product offering. For more in-formation on testing procedures, see page 68.Our front-to-back ratios are specified for ±20° from180° (worst case) to 0°.

Testing

Page 43: Catalog, Allgon - Swedcom

80

0 M

Hz

Ad

just

ab

le E

lect

rica

lD

ow

nti

lt C

ity

Pa

ne

l A

nte

nn

a Q U I C K R E F E R E N C E G U I D E

B a s e S t a t i o n A n t e n n a s P a g e 4 5

60 Degree Adjustable ElectricalDowntilt Panel

Gain Part Number Description Page

13 dBd7143.24.33.50 CI-800-60-15i-A-D 467143.24.34.50 CI-800-60-15i-A-D-B 467143.24.05.50 CI-800-60-15i-A-N 46

90 Degree Adjustable ElectricalDowntilt Panel

Gain Part Number Description Page

11.5 dBd7144.24.33.50 CI-800-90-13.5i-A-D 467144.24.34.50 CI-800-90-13.5i-A-D-B 467144.24.05.50 CI-800-90-13.5i-A-N 46

105 Degree Adjustable ElectricalDowntilt Panel

Gain Part Number Description Page

11 dBd7145.24.33.50 CI-800-105-13i-A-D 477145.24.34.50 CI-800-105-13i-A-D-B 477145.24.05.50 CI-800-105-13i-A-N 47

120 Degree Adjustable ElectricalDowntilt Panel

Gain Part Number Description Page

10 dBd7146.24.33.50 CI-800-120-12i-A-D 477146.24.34.50 CI-800-120-12i-A-D-B 477146.24.05.50 CI-800-120-12i-A-N 47

800 MHzAdjustable

Electrical DowntiltCity Panel Antenna

C I - 8 0 0 - 9 0 - 1 3 . 5 i - A - D7/16 DINConnector

Description Detail:

CityPanelFamily

FrequencyBand

HorizontalBeamwidth

AdjustableElectrical DowntiltGain

in dBi

A trailing B indicates connector placement on the back panel, no B indicates connector placement on the bottom.

Antennas may be ordered using part number or description.

Gain varies depending on electrical downtilt setting.Rating is for an average peak gain.

Page 44: Catalog, Allgon - Swedcom

CI-800-90-13.5i

B a s e S t a t i o n A n t e n n a s P a g e 4 6

8 0 0 M H z A d j u s t a b l e E l e c t r i c a lD o w n t i l t C i t y P a n e l A n t e n n a

-40

-35

-30

-25

-20

-15

-10

-5

0

-40

-35

-30

-25

-20

-15

-10

-5

0

A poster displaying a comparison of antenna patterns has been included at the back of the catalog.

Typical Horizontal and Vertical 7143.24 Patterns at an Extreme Tilt Angle

Typical Horizontal and Vertical 7144.24 Patterns at an Extreme Tilt Angle

For a complete list of released models pertaining to gain and connector placement, please see the

quick reference guide on page 45.

80

0 M

Hz A

dju

stab

le Ele

ctrical

Do

wn

tilt City

Pa

ne

l An

ten

na

CI-800-60-15i

Electrical Specifications 7143.24 7144.24(CI-800-60-15i) (CI-800-90-13.5i)

Gain 13 dBd (15 dBi) 11.5 dBd (13.5 dBi)Polarization linear, vertical linear, verticalVSWR, 50Ω <1.5:1 (806 MHz to 869 MHz) <1.5:1 (806 MHz to 869 MHz)VSWR, 50Ω <1.3:1 (869 MHz to 896 MHz) <1.3:1 (869 MHz to 896 MHz)Horizontal 3dB beamwidth 60° 90°Vertical 3dB beamwidth 16° 16°Custom electrical downtilts 0° to 17° in one degree steps 0° to 17° in one degree steps40 degree cone Front-to-back ratio >25 dB >25 dBSuppression of first upper side lobe >13 dB >13 dBMaximum CW input power 500W 500WTwo tone intermodulation 3rd order <-103 dBm for 2x20W <-103 dBm for 2x20W

(146 dBc at 2x43 dBm) (146 dBc at 2x43 dBm)

Mechanical Specifications

Connector 7/16 DIN or Type N on bottom/or 7/16 DIN on backHeight 47.2" (1200 mm) 47.2" (1200 mm)Width 11.8" (300 mm) 11.8" (300 mm)Depth 5.1" (130 mm) 5.1" (130 mm)Weight 21 lbs (9.5 kg) 21 lbs (9.5 kg)Survival wind speed 156 mph (70 m/s) 156 mph (70 m/s)Maximum wind area 3.9 sq.ft (0.36 sq.m) 3.9 sq.ft (0.36 sq.m)Frontal wind load @100mph (C=1) 102 lbf (453 N) 102 lbf (453 N)*All metallic components DC grounded for Lightning Protection

Mounting Hardware Options for Installation1) Pole mount 2165.10 2165.102) Combined pole mount/downtilt bracket 7254.10 (-0.7° to +16°) 7254.10 (-0.7° to +16°)

CommentsGain is typical within frequency band.Front-to-back ratio is defined within 20° from the backwards direction in any plane.Sidelobe suppression and null fill is relative to peak of main beam.Radome color is NCS 2502-B (RAL 7035)(gray).

Page 45: Catalog, Allgon - Swedcom

CI-8

00-1

05-1

3i

B a s e S t a t i o n A n t e n n a s P a g e 4 7

8 0 0 M H z A d j u s t a b l e E l e c t r i c a lD o w n t i l t C i t y P a n e l A n t e n n a

A poster displaying a comparison of antenna patterns has been included at the back of the catalog.

For a complete list of released models pertaining to gain and connector placement, please see the

quick reference guide on page 45.

80

0 M

Hz

Ad

just

ab

le E

lect

rica

l D

ow

nti

lt C

ity

Pa

ne

l A

nte

nn

aCI

-800

-120

-12i

-40

-35

-30

-25

-20

-15

-10

-5

0

-40

-35

-30

-25

-20

-15

-10

-5

0

Typical Horizontal and Vertical 7145.24 Patterns at anExtreme Tilt Angle

Typical Horizontal and Vertical 7146.24 Patterns at anExtreme Tilt Angle

Electrical Specifications 7145.24 7146.24(CI-800-105-13i) (CI-800-120-12i)

Gain 11 dBd (13 dBi) 10 dBd (12 dBi)Polarization linear, vertical linear, verticalVSWR, 50Ω <1.5:1 (806 MHz to 869 MHz) <1.5:1 (806 MHz to 869 MHz)VSWR, 50Ω <1.3:1 (869 MHz to 896 MHz) <1.3:1 (869 MHz to 896 MHz)Horizontal 3dB beamwidth 105° 120°Vertical 3dB beamwidth 16° 16°Custom electrical downtilts 0° to 17° in one degree steps 0° to 17° in one degree steps40 degree cone Front-to-back ratio >20 dB >20 dBSuppression of first upper side lobe >13 dB >13 dBMaximum CW input power 500W 500WTwo tone intermodulation 3rd order <-103 dBm for 2x20W <-103 dBm for 2x20W

(146 dBc at 2x43 dBm) (146 dBc at 2x43 dBm)

Mechanical Specifications

Connector 7/16 DIN or Type N on bottom or 7/16 DIN on backHeight 47.2" (1200 mm) 47.2" (1200 mm)Width 11.8" (300 mm) 11.8" (300 mm)Depth 5.1" (130 mm) 5.1" (130 mm)Weight 21 lbs (9.5 kg) 21 lbs (9.5 kg)Survival wind speed 156 mph (70 m/s) 156 mph (70 m/s)Maximum wind area 3.9 sq.ft (0.36 sq.m) 3.9 sq.ft (0.36 sq.m)Frontal wind load @100mph (C=1) 102 lbf (453 N) 102 lbf (453 N)*All metallic components DC grounded for Lightning Protection

Mounting Hardware Options for Installation1) Pole mount 2165.10 2165.102) Combined pole mount/downtilt bracket 7254.10 (-0.7° to +16°) 7254.10 (-0.7° to +16°)

CommentsGain is typical within frequency band.Front-to-back ratio is defined within 20° from the backwards direction in any plane.Sidelobe suppression and null fill is relative to peak of main beam.Radome color is NCS 2502-B (RAL 7035)(gray).

Page 46: Catalog, Allgon - Swedcom

8 0 0 M H z U r b a n “ S l i m P a n e l ” A n t e n n a

B a s e S t a t i o n A n t e n n a s P a g e 4 8

80

0 M

Hz U

rba

n

“Slim

Pa

ne

l” An

ten

na

Features

Design Philosophy

Quality Materials

The Allgon “Slim Panel” Antenna is designed in arepeatable procedure which requires no tuning ormodification, with the specification being thesame from product to product. The Urban “SlimPanel” antenna has a robust mechanical designwhich does not rely on the radome for support. Theradome, which is only for weatherproofing, is setinside the endcaps and allows for thermalexpansion. Proper use of materials and their structure ensures

performance integrity. In antennas, the electricalperformance is directly related to mechanicalperformance. The choice of radome materials iscrucial since it acts as a window between theradiating elements and the coverage area. Our UVstabilized PVC radome is resistant to moistureabsorption. Furthermore, our radomes canwithstand mechanical stresses, even at lowtemperatures and long exposure to UV radiation.For corrosion inhibition, we use aircraft qualityaluminum alloy that is inherently resistant tocorrosion caused by the environment.

The Allgon “Slim Panel” antennas have verifiedvertical pattern performance on 100% of theantennas. The product line has a better than 1.4:1VSWR receive and 1.3:1 transmit. The “SlimPanel” antenna has consistent, reliableperformance from frequency to frequency andproduct to product.

Performance

Bracket hardware for the 800 MHz “Slim Panel”antenna is made of only the highest qualityaircraft aluminum and galvanized stainless steel,and is available in non-tilt and mechanical tilt formounting to a pipe. The 800 MHz “Slim Panel”antenna can also be flush mounted with tilt onpanning. For more information, see page 67.

Brackets

7/16 DIN Connector, Type “N” Connector

Connectors

Allgon prides itself on stringent testing require-ments with conservative, yet realistic claims of theperformance of our product offering. For more in-formation on testing procedures, see page 68. Ourfront-to-back ratios are specified for ±20° from 180°(worst case) to 0°.

Testing

• Same pattern across the entire frequencyband

• 100% VSWR testing• Superior vertical pattern shaping for

interference reduction• 100% verified for vertical pattern

performance• Mechanical design allows for thermal

expansion• Aesthetically pleasing

Page 47: Catalog, Allgon - Swedcom

B a s e S t a t i o n A n t e n n a s P a g e 4 9

80

0 M

Hz

Urb

an

“S

lim

Pa

ne

l” A

nte

nn

aQ U I C K R E F E R E N C E G U I D E

90 Degree 800 MHz Flat Panel65 Degree 800 MHz Flat Panel

Gain Part Number Description Page

10.5 dBd

13.5 dBd

14.5 dBd

7270.02 U-800-65-12.5i-0-D 507270.01 U-800-65-12.5i-0-N 50

7271.02 U-800-65-15.5i-0-D 507271.01 U-800-65-15.5i-0-N 507271.03 U-800-65-15.5i-5-D 50

7272.02 U-800-65-16.5i-0-D 517272.01 U-800-65-16.5i-0-N 51

7273.01 U-800-65-17.5i-0-N 517273.02 U-800-65-17.5i-0-D 517273.03 U-800-65-17.5i-4-D 51

15.5 dBd

Gain Part Number Description Page

9.5 dBd

12 dBd

13 dBd

7275.02 U-800-90-11.5i-0-D 527275.01 U-800-90-11.5i-0-N 52

7276.02 U-800-90-14i-0-D 527276.01 U-800-90-14i-0-N 52

7277.02 U-800-90-15i-0-D 537277.01 U-800-90-15i-0-N 53

7278.02 U-800-90-16i-0-D 537278.01 U-800-90-16i-0-N 53

14 dBd

800 MHzUrban “SlimPanel”Antenna

U - 8 0 0 - 9 0 - 1 4 i - 0 - D7/16 DINConnector

Description Detail:

UrbanFamily

FrequencyBand

HorizontalBeamwidth

Electrical DowntiltAngleGain

in dBi

Antennas may be ordered using part number or description.

Page 48: Catalog, Allgon - Swedcom

B a s e S t a t i o n A n t e n n a s P a g e 5 0

8 0 0 M H z U r b a n “ S l i m P a n e l ” A n t e n n a

-40

-35

-30

-25

-20

-15

-10

-5

0

-40

-35

-30

-25

-20

-15

-10

-5

0

A poster displaying a comparison of antenna patterns has been included at the back of the catalog.

Typical Horizontal and Vertical 7270.02 Patterns Typical Horizontal and Vertical 7271.02 Patterns

For a complete list of released models pertaining to gain, electrical downtilt and connector placement,

please see the quick reference guide on page 49.

80

0 M

Hz U

rba

n

“Slim

Pa

ne

l” An

ten

na

U-800-65-15.5i

Electrical Specifications 7270 7271(U-800-65-12.5i) (U-800-65-15.5i)

Gain 10.5 dBd (12.5 dBi) 13.5 dBd (15.5 dBi)Polarization linear, vertical linear, verticalVSWR, 50Ω <1.4:1 (824 MHz to 869 MHz) <1.4:1 (824 MHz to 869 MHz)VSWR, 50Ω <1.3:1 (869 MHz to 896 MHz) <1.3:1 (869 MHz to 896 MHz)Horizontal 3dB beamwidth 65° 65°Vertical 3dB beamwidth 28° 14°Custom electrical downtilts 0° 0°40 degree cone Front-to-back ratio >24 dB >24 dBSuppression of first upper side lobe >10 dB >17 dBMaximum CW input power 300W 500WTwo tone intermodulation 3rd order <-107dBm for 2x20W <-107 dBm for 2x20W

(150dBc at 2x43 dBm) (150 dBc at 2x43 dBm)

Mechanical Specifications

Connector 7/16 DIN or Type N bottom mountedHeight 26" (660 mm) 52" (1320 mm)Width 10.1" (256 mm) 10.1" (256 mm)Depth 2" (50 mm) 2" (50 mm)Weight 8.8 lbs (4 kg) 15.4 lbs (7 kg)Survival wind speed 123 mph (55 m/s) 123 mph (55 m/s)Maximum wind area 1.8 sq.ft (0.17 sq.m) 3.6 sq.ft (0.34 sq.m)Frontal wind load @100mph (C=1) 47.8 lbf (213 N) 95.6 lbf (376 N)*All metallic components DC grounded for Lightning Protection

Mounting Hardware Options for Installation1) Pole mount 2165.10 2165.102) Combined pole mount/downtilt bracket 7254.10 (-1.3° to 31°) 7254.10 (-0.6° to 15°)

CommentsGain is typical within frequency band.Front-to-back ratio is defined within 20° from the backwards direction in any plane.Sidelobe suppression and null fill is relative to peak of main beam.Radome color is NCS 2502-B (RAL 7035)(gray).

U-800-65-12.5i

Page 49: Catalog, Allgon - Swedcom

U-8

00-6

5-16

.5i

B a s e S t a t i o n A n t e n n a s P a g e 5 1

8 0 0 M H z U r b a n “ S l i m P a n e l ” A n t e n n a

A poster displaying a comparison of antenna patterns has been included at the back of the catalog.

For a complete list of released models pertaining to gain, electrical downtilt and connector placement,

please see the quick reference guide on page 49.

80

0 M

Hz

Urb

an

“S

lim

Pa

ne

l” A

nte

nn

aU

-800

-65-

17.5

i

-40

-35

-30

-25

-20

-15

-10

-5

0

-40

-35

-30

-25

-20

-15

-10

-5

0

Typical Horizontal and Vertical 7272.02 Patterns Typical Horizontal and Vertical 7273.02 Patterns

Electrical Specifications 7272 7273(U-800-65-16.5i) (U-800-65-17.5i)

Gain 14.5 dBd (16.5 dBi) 15.5 dBd (17.5 dBi)Polarization linear, vertical linear, verticalVSWR, 50Ω <1.4:1 (824 MHz to 869 MHz ) <1.4:1 (824 MHz to 869 MHz)VSWR, 50Ω <1.3:1 (869 MHz to 896 MHz ) <1.3:1 (869 MHz to 896 MHz)Horizontal 3dB beamwidth 65° 65°Vertical 3dB beamwidth 9.5° 7°Custom electrical downtilts 0° 0°40 degree cone Front-to-back ratio >24 dB >24 dBSuppression of first upper side lobe >18 dB >18 dBFirst lower null fill >-13 dB >-22 dBMaximum CW input power 500W 500WTwo tone intermodulation 3rd order <-107 dBm for 2x20W <-107 dBm for 2x20W

(150 dBc at 2x43 dBm) (150 dBc at 2x43 dBm)

Mechanical Specifications

Connector 7/16 DIN or Type N bottom mountedHeight 76.4" (1940 mm) 102" (2580 mm)Width 10.1" (256 mm) 10.1" (256 mm)Depth 2" (50 mm) 2" (50 mm)Weight 23.2 lbs (11 kg) 30.9 lbs (14 kg)Survival wind speed 123 mph (55 m/s) 123 mph (55 m/s)Maximum wind area 5.3 sq.ft (0.50 sq.m) 7.1 sq.ft (0.66 sq.m)Frontal wind load @100mph (C=1) 140 lbf (625 N) 187 lbf (831 N)*All metallic components DC grounded for Lightning Protection

1) Pole mount 2165.10 2165.112) Combined pole mount/downtilt bracket 7254.10 (-0.4° to 10°) 7254.11 (-0.4° to 8°)

CommentsGain is typical within frequency band.Front-to-back ratio is defined within 20° from the backwards direction in any plane.Sidelobe suppression and null fill is relative to peak of main beam.Radome color is NCS 2502-B (RAL 7035)(gray).

Page 50: Catalog, Allgon - Swedcom

B a s e S t a t i o n A n t e n n a s P a g e 5 2

8 0 0 M H z U r b a n “ S l i m P a n e l ” A n t e n n a

-40

-35

-30

-25

-20

-15

-10

-5

0

-40

-35

-30

-25

-20

-15

-10

-5

0

A poster displaying a comparison of antenna patterns has been included at the back of the catalog.

Typical Horizontal and Vertical 7275.02 Patterns Typical Horizontal and Vertical 7276.02 Patterns

For a complete list of released models pertaining to gain, electrical downtilt and connector placement,

please see the quick reference guide on page 49.

80

0 M

Hz U

rba

n

“Slim

Pa

ne

l” An

ten

na

U-800-90-14i

Electrical Specifications 7275 7276(U-800-90-11.5i) (U-800-90-14i)

Gain 9.5 dBd (11.5 dBi) 12 dBd (14 dBi) Polarization linear, vertical linear, verticalVSWR, 50Ω <1.4:1 (824 MHz to 869 MHz) <1.4:1 (824 MHz to 869 MHz)VSWR, 50Ω <1.3:1 (869 MHz to 896 MHz) <1.3:1 (869 MHz to 896 MHz)Horizontal 3dB beamwidth 90° 90°Vertical 3dB beamwidth 28° 14.5°Custom electrical downtilts 0° 0°40 degree cone Front-to-back ratio >20 dB >20 dBSuppression of first upper side lobe >12 dB >17 dBMaximum CW input power 300W 500WTwo tone intermodulation 3rd order <-107 dBm for 2x20W <-107 dBm for 2x20W

(150 dBc at 2x43 dBm) (150 dBc at 2x43 dBm)

Mechanical Specifications

Connector 7/16 DIN or Type N bottom mountedHeight 27.4" (695 mm) 52" (1320 mm)Width 6.3" (160 mm) 6.3" (160 mm)Depth 2.2" (55 mm) 2.2" (55 mm)Weight 6.6 lbs (3 kg) 13.2 lbs (6 kg)Survival wind speed 123 mph (55 m/s) 123 mph (55 m/s)Maximum wind area 1.2 sq.ft (0.11 sq.m) 2.3 sq.ft (0.21 sq.m)Frontal wind load @100mph (C=1) 31.4 lbf (140 N) 74.9 lbf (333 N)*All metallic components DC grounded for Lightning Protection

1) Pole mount 2165.10 2165.102) Combined pole mount/downtilt bracket 7254.10 (-1.3° to 31°) 7254.10 (-0.6° to 15°)

CommentsGain is typical within frequency band.Front-to-back ratio is defined within 20° from the backwards direction in any plane.Sidelobe suppression and null fill is relative to peak of main beam.Radome color is NCS 2502-B (RAL 7035)(gray).

U-800-90-11.5i

Page 51: Catalog, Allgon - Swedcom

U-8

00-9

0-15

i

B a s e S t a t i o n A n t e n n a s P a g e 5 3

8 0 0 M H z U r b a n “ S l i m P a n e l ” A n t e n n a

A poster displaying a comparison of antenna patterns has been included at the back of the catalog.

For a complete list of released models pertaining to gain, electrical downtilt and connector placement,

please see the quick reference guide on page 49.

80

0 M

Hz

Urb

an

“S

lim

Pa

ne

l” A

nte

nn

aU

-800

-90-

16i

-40

-35

-30

-25

-20

-15

-10

-5

0

-40

-35

-30

-25

-20

-15

-10

-5

0

Typical Horizontal and Vertical 7277.02 Patterns Typical Horizontal and Vertical 7278.02 Patterns

Electrical Specifications 7277 7278(U-800-90-15i) (U-800-90-16i)

Gain 13 dBd (15 dBi) 14 dBd (16 dBi)Polarization linear, vertical linear, verticalVSWR, 50Ω <1.4:1 (824 MHz to 869 MHz) <1.4:1 (824 MHz to 869 MHz)VSWR, 50Ω <1.3:1 (869 MHz to 896 MHz) <1.3:1 (869 MHz to 896 MHz)Horizontal 3dB beamwidth 90° 90°Vertical 3dB beamwidth 9.5° 7°Custom electrical downtilts 0° 0°40 degree cone Front-to-back ratio >21 dB >21 dBSuppression of first upper side lobe >17 dB >17 dBFirst lower null fill >-15 dB >-22 dBMaximum CW input power 500W 500WTwo tone intermodulation 3rd order <-107 dBm for 2x20W <-107 dBm for 2x20W

(150 dBc at 2x43 dBm) (150 dBc at 2x43 dBm)

Mechanical Specifications

Connector 7/16 DIN or Type N bottom mountedHeight 76.4" (1940 mm) 102" (2580 mm)Width 6.3" (160 mm) 6.3" (160 mm)Depth 2.2" (55 mm) 2.2" (55 mm)Weight 19.8 lbs (9 kg) 23.2 lbs (11 kg)Survival wind speed 123 mph (55 m/s) 123 mph (55 m/s)Maximum wind area 3.3 sq.ft (0.31 sq.m) 4.4 sq.ft (0.41 sq.m)Frontal wind load @100mph (C=1) 87.8 lbf (391 N) 117 lbf (519 N)*All metallic components DC grounded for Lightning Protection

1) Pole mount 2165.10 2165.112) Combined pole mount/downtilt bracket 7254.10 (-0.4° to 10°) 7254.11 (-0.4° to 8°)

CommentsGain is typical within frequency band.Front-to-back ratio is defined within 20° from the backwards direction in any plane.Sidelobe suppression and null fill is relative to peak of main beam.Radome color is NCS 2502-B (RAL 7035)(gray).

Page 52: Catalog, Allgon - Swedcom

8 0 0 & 9 0 0 M H z O m n i d i r e c t i o n a l A n t e n n a

Features

• Extremely rugged

• Minimized tip deflector

• Feed path yields consistent RF path and IM performance

• Able to manage high wind speeds

• Good power handling

• No hygroscopic materials

• Easily adaptive to customer requirements

• Electrical downtilt available

Design Philosophy

Our Omnidirectional antenna is designed in arepeatable procedure which requires no tuning ormodification, with the specification being the samefrom product to product. The Omni has a some-what larger diameter allowing room for individualfeed of the radiating elements, easy control of theamplitude and phase, and cables of sufficientdimensions for the current. Also, the larger diameterallows for the extruded internal support pipe whichgives the Omni its robust and rigid design, a greatersurvival wind speed, and allows for a radome ofextruded PVC plastics, thus avoiding fiberglass.

The Omni antenna is designed to provide goodpower handling with low intermodulation. It cansurvive in wind speed of 156 mph, and also haslow deflection of <1° at 156 mph wind speed.

Performance

Bracket hardware for the Omni is made of onlythe highest quality acid-proof stainless steel andis available in non-tilt mounting to a pipe. Foradditional information, see page 67.

Brackets

B a s e S t a t i o n A n t e n n a s P a g e 5 4

Allgon prides itself on stringent testing require-ments with conservative, yet realistic claims ofthe performance of our product offering. Formore information on testing procedures, seepage 68.

Testing

7/16 DIN Connector, Type “N” Connector

Connectors

Proper use of materials and their structureensures performance integrity. In antennas, theelectrical performance is directly related tomechanical performance. The choice of radomematerial is crucial since it acts as a windowbetween the radiating elements and thecoverage area. The Omni antenna is made ofsilverplated brass with an allydyne treatment toresist corrosion. Also, the dielectric insulators aremade of teflon. Our UV stabilized PVC radome isresistant to moisture absorption and can with-stand mechanical stresses, even at low tempera-tures and long exposure to UV radiation.

Quality Materials

80

0 &

90

0 M

Hz O

mn

idire

ction

al

An

ten

na

Page 53: Catalog, Allgon - Swedcom

B a s e S t a t i o n A n t e n n a s P a g e 5 5

Q U I C K R E F E R E N C E G U I D E

900 MHz Omni ElectricalDowntilt Inverted Mount

Gain Part Number Description Page

9 dBd

4168.11.33.52 O-900-360-11i+2-D 564168.11.05.52 O-900-360-11i+2-N 564168.11.33.53 O-900-360-11i+3-D 564168.11.05.53 O-900-360-11i+3-N 56

900 MHz Omni

Gain Part Number Description Page

9 dBd

4168.11.33.00 O-900-360-11i-0-D 564168.11.05.00 O-900-360-11i-0-N 564168.11.33.02 O-900-360-11i-2-D 564168.11.05.02 O-900-360-11i-2-N 564168.11.33.03 O-900-360-11i-3-D 564168.11.05.03 O-900-360-11i-3-N 564168.11.33.06 O-900-360-11i-6-D 564168.11.05.06 O-900-360-11i-6-N 56

800 MHz Omni

Gain Part Number Description Page

9 dBd

4168.21.33.00 O-800-360-11i-0-D 564168.21.05.00 O-800-360-11i-0-N 564168.21.33.03 O-800-360-11i-3-D 564168.21.05.03 O-800-360-11i-3-N 564168.21.33.07 O-800-360-11i-7-D 564168.21.05.07 O-800-360-11i-7-N 56

800 MHzOmnidirectional

Antenna

O - 8 0 0 - 3 6 0 - 1 1 i - 0 - D7/16 DINConnector

Description Detail:

OmniFamily

FrequencyBand

HorizontalBeamwidth

Electrical DowntiltAngleGain

in dBi

80

0 &

90

0 M

Hz

Om

nid

ire

ctio

na

l A

nte

nn

a

Antennas may be ordered using part number or description.

Page 54: Catalog, Allgon - Swedcom

B a s e S t a t i o n A n t e n n a s P a g e 5 6

8 0 0 & 9 0 0 M H z O m n i d i r e c t i o n a l A n t e n n a

-40

-35

-30

-25

-20

-15

-10

-5

0

-40

-35

-30

-25

-20

-15

-10

-5

0

A poster displaying a comparison of antenna patterns has been included at the back of the catalog.

Typical Horizontal and Vertical 4168.11 Patterns Typical Horizontal and Vertical 4168.21 Patterns

For a complete list of released models pertaining to gain, electrical downtilt and mounting orientation,

please see the quick reference guide on page 55.

80

0 &

90

0 M

Hz O

mn

idire

ction

al

An

ten

na

Electrical Specifications 4168.11 4168.21(O-900-360-11i) (O-800-360-11i)

Gain 9 dBd (11 dBi) 9 dBd (11 dBi)Polarization linear linearVSWR, 50Ω <1.4:1 (872 MHz to 960 MHz) <1.5:1 (824 MHz to 896 MHz)Horizontal 3dB beamwidth 360° 360°Vertical 3dB beamwidth 6.5° 6.5°Custom electrical downtilts 0°, 2°, 3°, 6°, +2°, & +3° 0°, 3°, & 7°Maximum CW input power 500W 500WTwo tone intermodulation 3rd order <-103 dBm for 2x20W <-103 dBm for 2x20W

(146 dBc at 2x43 dBm) (146 dBc at 2x43 dBm)

Mechanical Specifications

Connector 7/16 DIN or Type N bottom mount/inverted mount 7/16 DIN or Type N bottom mountHeight 123.6" (3140 mm) 123.6" (3140 mm)Diameter 3.1" (078 mm) 3.1" (078 mm)Weight 31 lbs (14 kg) 31 lbs (14 kg)Survival wind speed 156 mph (70 m/s) 156 mph (70 m/s)Maximum wind area 2.7 sq.ft (0.25 sq.m) 2.7 sq.ft (0.25 sq.m)Frontal wind load @112mph 56 lbf (250 N) 56 lbf (250 N)

*All metallic components DC grounded for Lightning Protection

CommentsGain is typical within frequency band.Front-to-back ratio is defined within 20° from the backwards direction in any plane.Sidelobe suppression and null fill is relative to peak of main beam.Radome color is NCS 2502-B (RAL 7035)(gray).

U-800-360-11i

O-900-360-11i

Page 55: Catalog, Allgon - Swedcom

Ind

oo

r Pa

ne

l An

ten

na

I n d o o r P a n e l A n t e n n a

B a s e S t a t i o n A n t e n n a s P a g e 5 8

Features

• Perfect for indoor coverage

• Sleek design

• Easy to install

• Feed path yields consistent RF path and IM performance

• Easily adaptive to customer requirements

Design Philosophy

Our Indoor panel antenna is designed in a repeatableprocedure which requires no tuning or modification,with the specification being the same from productto product. The Indoor panel antenna is designed toblend into a wall or roof inside a building.

The Indoor panel antenna is designed for goodaesthetics with a very low profile. The depth is only1.6 inches.

Performance

Bracket hardware for the Indoor panel antenna isfor mounting to a wall inside a building. It ismade for easy installation.

Brackets

Allgon prides itself on stringent testing require-ments with conservative, yet realistic claims of theperformance of our product offering. The antennais tested for VSWR, intermodulation, powerhandling and gain.

Testing

Type “N” Connector, SMA

Connectors

Proper use of materials and their structure ensuresperformance integrity. In antennas, the electricalperformance is directly related to mechanicalperformance. The choice of radome material iscrucial since it acts as a window between theradiating elements and the coverage area. TheIndoor panel antenna is made with aircraft qualityaluminum. Also, the dielectric insulators are madeof teflon. Our UV stabilized PVC radome is verysleek and thin for an indoor environment.

Quality Materials

Page 56: Catalog, Allgon - Swedcom

B a s e S t a t i o n A n t e n n a s P a g e 5 9

Q U I C K R E F E R E N C E G U I D E

Multiband (800 MHz/900 MHz/1800MHz/1900 MHz/2100 MHz) Omni

Gain Part Number Description Page1 dBd 7336.00 ALIC-8/9/18/19/2100-360-3i-O-N 56

1800/1900 MHz Panel

Gain Part Number Description Page8 dBd 7193.01 CO-1800/1900-65-10i-O-N 56

800 MHz Panel

Gain Part Number Description Page6.5 dBd 7190.01 CO-850-74-8.5i-O-S 56

IndoorPanel

Antenna

C O - 8 5 0 - 7 4 - 8 . 5 i - 0 - SSMAConnector

Description Detail:

IndoorPanelFamily

FrequencyBand

HorizontalBeamwidth

Electrical DowntiltAngleGain

in dBi

Ind

oo

r P

an

el

An

ten

na

Antennas may be ordered using part number or description.

Page 57: Catalog, Allgon - Swedcom

CO

-1800/1900-65-10i-O

-NA

LIC-8/9/18/19/

2100-360-3i-O-N

B a s e S t a t i o n A n t e n n a s P a g e 6 0

I n d o o r P a n e l A n t e n n a

A poster displaying a comparison of antenna patterns has been included at the back of the catalog.

Ind

oo

r Pa

ne

l An

ten

na

Electrical Specifications 7190.01 7193.01(CO-850-74-8.5i-O-S) (CO-1800/1900-65-10i-O-N)

Gain 6.5 dBd (8.5 dBi) 8 dBd (10 dBi)Polarization linear linearVSWR, 50Ω <1.35:1 (806 MHz to 896 MHz) <1.3:1 (1710 MHz to 1990 MHz)Horizontal 3dB beamwidth 74° 65°Vertical 3dB beamwidth 60° 63°40 degree cone Front-to-back ratio >18 dB >20 dBMaximum CW input power 20W 100WTwo tone intermodulation 3rd order <-103 dBm for 2x6W <-103 dBm for 2x10W

(141 dBc at 2x38 dBm) (143 dBc at 2x40 dBm)

Mechanical Specifications

Connector SMA back internal Type N back internalHeight 10.5" (265 mm) 10.5" (265 mm)Width 9.2" (230 mm) 9.2" (230 mm)Depth 1.6" (40 mm) 1.6" (40 mm)Weight 1.1 lbs (0.5 kg) 1.1 lbs (0.5 kg)

Electrical Specifications 7336.00(ALIC-8/9/18/19/2100-360-3i-O-N)

Gain 0 to 2 dBi (806-960 MHz) 2 to 6 dBi (1420-2400 MHz)VSWR, 50Ω, typical† 1.5:1 (806-960 MHz & 1420-2400 MHz)Horizontal 3dB beamwidth 360°Vertical 3dB beamwidth 180°Maximum CW input power 40WTwo tone intermodulation 3rd order < -107 dBm for 2x20W (150 dBc at 2x43 dBm)

Mechanical Specifications

Connector Type N centerWidth 7.3" (185 mm)Depth 2.6" (65 mm)Weight 0.5 lbs (0.2 kg)

CommentsGain is typical within frequency band.Front-to-back ratio is defined within 20° from the backwards direction in any plane.Sidelobe suppression and null fill is relative to peak of main beam.Radome color is NCS 2502-B (RAL 7035)(gray) for 7190.01 and 7193.01; white for 7336.00.†VSWR, 50Ω, worst case, <2:1 ( near the band edges at 806 MHz and 960 MHz )

CO

-850-74-8.5i-O

-S

Page 58: Catalog, Allgon - Swedcom

Allgon DualBand Filter

800 MHz BTS 1900 MHz BTS

800MHz

1900MHz

1900MHz

800MHz

Tower Top

Within theShelter

Allgon DualBand Filter

Allgon DualBand Filter

Allgon DualBand Filter

Feeder Cables

Allgon DualBand Filter

800 MHz BTS 1900 MHz BTS

800MHz

DualPolarized

1900MHz

800MHz

Tower Top

Within theShelter

Allgon DualBand Filter

Allgon DualBand Filter

Allgon DualBand Filter

Feeder Cables

Allgon DualBand Filter

Allgon DualBand Filter

800 MHz BTS 1900 MHz BTS

Tower Top

Within theShelter

AllgonDualBand

Antenna

AllgonDualBand

Antenna

FeederCables

Allgon DualBand Filter

Allgon DualBand Filter

800 MHz BTS 1900 MHz BTS

Tower Top

Within theShelter

AllgonDualBand

Antenna

AllgonDualBand

Antenna

FeederCables

DualPolarized

800MHz

Page 59: Catalog, Allgon - Swedcom

80

0/19

00

MH

z Du

al B

an

d S

olu

tion

8 0 0 / 1 9 0 0 M H z D u a l B a n d S o l u t i o n

B a s e S t a t i o n A n t e n n a s P a g e 6 1

Features

• Stable pattern across eachfrequency band

• 100% IM testing

• Superior vertical pattern shapingfor interference reduction

• 100% verified for vertical patternperformance

• Mechanical design allows forthermal expansion

• Aesthetically pleasing

Installation Advantages

• Save money on cable

• Reduce wind load on theinstallation

• Reduce weight

Design

The Allgon Dual Band Antenna utilizes adual band feed network to excite the dualband radiating elements. The Allgon DualBand Antenna and Dual Band Filter can beused together to cut the amount of cableneeded in half.

Using three Allgon Dual Band Antennasper sector face, in-band duplexing is notrequired. You utilize existing Feedercables. It allows for future 1900 MHzdeployment without another tower climb.These can be reduced to two antennasper sector face in full duplex operation(for high environmental impact sites).Using four single band antennas persector face, you need only two feedercables per sector. The four single bandantennas per sector face allow for ease ofmechanical downtilt optimizationbetween bands. You may reduce thissetup to three antennas per sector faceusing a dual polarized 1900 MHzantenna.

Benefits

Page 60: Catalog, Allgon - Swedcom

B a s e S t a t i o n A n t e n n a s P a g e 6 2

Q U I C K R E F E R E N C E G U I D E

70° Dual Band Panel

DualBand

Antenna

A L V C - 8 0 0 / 1 9 0 0 - 7 0 - 1 4 . 5 i / 1 7 . 5 i - 0 D

Description Detail:

DualBandFamily

FrequencyBands

HorizontalBeamwidth

7/16 DIN Connector

Gainin dBi800 MHz

Gainin dBi1900 MHz

ElectricalDowntiltAngle

80

0/1

90

0 M

Hz

Du

al B

an

d S

olu

tio

n

Antennas may be ordered using part number or description.

Gain Part Number Description Page

80° Dual Band Panel

Gain Part Number Description Page

90° Dual Band Panel

Gain Part Number Description Page

12.5 dBd15.5 dBd

10 dBd13 dBd

12 dBd15 dBd

9.5 dBd12.5 dBd

11.5 dBd14.5 dBd

9 dBd12 dBd

7333.00 ALVC-800/1900-70-14.5/17.5-0D 637333.06 ALVC-800/1900-70-14.5/17.5-6D 63

7337.00 ALVC-800/1900-70-12/15-0D 63

7334.00 ALVC-800/1900-90-13.5/16.5-0D 657334.06 ALVC-800/1900-90-13.5/16.5-6D 65

7339.00 ALVC-800/1900-90-11/14-0D 65

Dual Band Filter

Part Number Page9215.03 66

7332.00 ALVC-800/1900-80-14/17-0D 647332.02 ALVC-800/1900-80-14/17-2D 647332.06 ALVC-800/1900-80-14/17-6D 64

7338.00 ALVC-800/1900-80-11.5/14.5-0D 64

Page 61: Catalog, Allgon - Swedcom

Connector 7/16 DIN bottom mounted 7/16 DIN bottom mountedHeight 53.1" (1350 mm) 28.7" (720 mm)Width 11" (280 mm) 11" (280 mm)Depth 4.9" (125 mm) 4.9" (125 mm)Weight 20.7 lbs (9.4 kg) 10.7 lbs (4.9 kg)Survival wind speed 156 mph (70 m/s) 156 mph (70 m/s)Maximum wind area 4.1 sq.ft (0.38 sq.m) 2.2 sq.ft (0.2 sq.m)Frontal wind load @100 mph (C=1) 107 lbf (476 N) 57 lbf (254 N)

*All feed network components DC grounded for Lightning Protection

Mounting Hardware Options for Installation1) Pole mount 2165.10 2165.102) Combined pole mount and downtilt bracket 7254.10 (-0.6° to 15°) 7254.10 (-1.3° to 31°)

CommentsGain is typical within frequency band.Front-to-back ratio is defined within 20° from the backwards direction in any plane.Sidelobe suppression and null fill is relative to peak of main beam.Radome color is NCS 2502-B (RAL 7035)(gray).

ALV

C-800/1900-70-14.5/17.5

B a s e S t a t i o n A n t e n n a s P a g e 6 3

8 0 0 / 1 9 0 0 M H z D u a l B a n d A n t e n n a

A poster displaying a comparison of antenna patterns has been included at the back of the catalog.

For a complete list of released modelspertaining to gain and electrical downtilt,

please see the quick reference guide onpage 62.

80

0/19

00

MH

z Du

al B

an

d A

nten

na

ALV

C-800/1900-70-12.0/15.0

Preliminary Electrical Specifications 7333 7337(ALVC-800/1900-70-14.5/17.5) (ALVC-800/1900-70-12.0/15.0)

Gain 12.5 dBd (14.5 dBi) 806 to 896 MHz 10 dBd (12 dBi) 806 to 896 MHz15.5 dBd (17.5 dBi) 1850 to 1990 MHz 13 dBd (15 dBi) 1850 to 1990 MHz

Polarization linear, vertical linear, verticalVSWR, 50Ω <1.4:1 <1.4:1Horizontal 3dB beamwidth 70° 70°Vertical 3dB beamwidth 15° (806 MHz-896 MHz) 30° (806 to 896 MHz)

7° (1850 MHz-1990 MHz) 14° (1850 to 1990 MHz)Custom electrical downtilts 0° & 6° (same tilt angle for both bands) 0° (same tilt angle for both bands)40 degree cone Front-to-back ratio >28 dB > 27 dBSuppression of first upper side lobe >16 dB > 16 dBFirst lower null fill N/A (806 to 896 MHz) N/A (806 to 896 MHz)

>-17 dB (1850 to 1990 MHz) > -17 dB (1850 to 1990 MHz)Maximum CW input power, per band 600W (806 to 896 MHz) 600W (806 to 896 MHz)

350W (1850 to 1990 MHz) 350W (1850 to 1990 MHz)Typical maximum combined input power 300W (806 to 896 MHz) 300W (806 to 896 MHz)

175W (1850 to 1990 MHz) 175W (1850 to 1990 MHz)Two tone intermodulation 3rd order (800 MHz) <-107 dBm for 2x20 W <-107 dBm for 2x20 W

(150 dBc at 2x43 dBm ) (150 dBc at 2x43 dBm)Two tone intermodulation 3rd order (1900 MHz) <-104 dBm for 2x20 W <-104 dBm for 2x20 W

(147 dBc at 2x43 dBm) (147 dBc at 2x43 dBm)

Preliminary Mechanical Specifications

-40-35-30-25-20-15-10-50

Typical Horizontal and Vertical 7333.00 Patterns at 800 MHz

-40-35

-30

-25

-20

-15

-10

-5

0

Typical Horizontal and Vertical 7333.00 Patterns at 1900 MHz

Scheduled to be released in year 2000

Page 62: Catalog, Allgon - Swedcom

Connector 7/16 DIN bottom mounted 7/16 DIN bottom mountedHeight 53.1" (1350 mm) 28.7" (720 mm)Width 11" (280 mm) 11" (280 mm)Depth 4.9" (125 mm) 4.9" (125 mm)Weight 20.7 lbs (9.4 kg) 10.7 lbs (4.9 kg)Survival wind speed 156 mph (70 m/s) 156 mph (70 m/s)Maximum wind area 4.1 sq.ft (0.38 sq.m) 2.2 sq.ft (0.2 sq.m)Frontal wind load @100mph (C=1) 107 lbf (476 N) 57 lbf (254 N)*All feed network components DC grounded for Lightning Protection

Mounting Hardware Options for Installation1) Pole mount 2165.10 2165.102) Combined pole mount and downtilt bracket 7254.10 (-0.6° to 15°) 7254.10 (-1.3° to 31°)

CommentsGain is typical within frequency band.Front-to-back ratio is defined within 20° from the backwards direction in any plane.Sidelobe suppression and null fill is relative to peak of main beam.Radome color is NCS 2502-B (RAL 7035)(gray)

ALV

C-80

0/19

00-

80-1

4/17

B a s e S t a t i o n A n t e n n a s P a g e 6 4

8 0 0 / 1 9 0 0 M H z D u a l B a n d A n t e n n a

A poster displaying a comparison of antenna patterns has been included at the back of the catalog.

80

0/1

90

0 M

Hz

Du

al B

an

d A

nte

nn

a

Electrical Specifications 7332 7338(ALVC-800/1900-80-14/17) (ALVC-800/1900-80-11.5/14.5)

Gain 12 dBd (14 dBi) 806-896 MHz 9.5 dBd (11.5 dBi) 806 to 896 MHz15 dBd (17 dBi) 1850-1990 MHz 12.5 dBd (14.5 dBi) 1850 to 1990 MHz

Polarization linear, vertical linear, verticalVSWR, 50Ω <1.4:1 <1.4:1Horizontal 3dB beamwidth 80° 80°Vertical 3dB beamwidth 15° (806 MHz-896 MHz) 30° (806 to 896 MHz)

7° (1850 MHz-1990 MHz) 14° (1850 to 1990 MHz)Custom electrical downtilts 0°, 2°, & 6° (same tilt angle for both bands) 0° (same tilt angle for both bands)40 degree cone Front-to-back ratio > 27 dB > 26 dBSuppression of first upper side lobe > 16 dB > 16 dBFirst lower null fill N/A (806 to 896 MHz) N/A (806 to 896 MHz)

> -17 dB (1850 MHz-1990 MHz) > -17 dB (1850 to 1990 MHz)Maximum CW input power per band 600W (800 MHz) 600W (806 to 896 MHz)

350W (1990 MHz) 350W (1850 to 1990 MHz)Typical maximum combined input power 300W (806 to 896 MHz) 300W (806 to 896 MHz)

175W (1850 to 1990 MHz) 175W (1850 to 1990 MHz)Two tone intermodulation 3rd order (800 MHz) <-107 dBm for 2x20 W < -107 dBm for 2x20 W

(150 dBc at 2x43 dBm) (150 dBc at 2x43 dBm)Two tone intermodulation 3rd order (1900 MHz) <-104 dBm for 2x20 W < -104 dBm for 2x20 W

(147 dBc at 2x43 dBm) (147 dBc at 2x43 dBm)

Mechanical Specifications

For a complete list of released modelspertaining to gain and electrical

downtilt, please see the quickreference guide on page 62.

-40-35-30-25-20-15-10-50

Typical Horizontal and Vertical 7332.00 Patterns at 800 MHz

-40-35-30-25-20-15-10-50

Typical Horizontal and Vertical 7332.00 Patterns at 1900 MHz

ALV

C-80

0/19

00-

80-1

1.5/

14.5

Scheduled to be released in year 2000

Page 63: Catalog, Allgon - Swedcom

ALV

C-800/1900-90-13.5/16.5

B a s e S t a t i o n A n t e n n a s P a g e 6 5

8 0 0 / 1 9 0 0 M H z D u a l B a n d A n t e n n a

A poster displaying a comparison of antenna patterns has been included at the back of the catalog.

For a complete list of released models pertainingto gain and electrical downtilt , please see the

quick reference guide on page 62.

80

0/19

00

MH

z Du

al B

an

d A

nten

na

ALV

C-800/1900-90-11/14

Electrical Specifications 7334 7339(ALVC-800/1900-90-13.5/16.5) (ALVC-800/1900-90-11/14)

Gain 11.5 dBd (13.5 dBi) 806 to 896 MHz 9 dBd (11 dBi) 806 to 896 MHz14.5 dBd (16.5 dBi) 1850 to 1990 MHz 12 dBd (14 dBi) 1850 to 1990 MHz

Polarization linear, vertical linear, verticalVSWR, 50W <1.4:1 <1.4:1Horizontal 3dB beamwidth 90° 90°Vertical 3dB beamwidth 15° (806 MHz-896 MHz) 30° (806 to 896 MHz)

7° (1850 MHz-1990 MHz) 14° (1850 to 1990 MHz)Custom electrical downtilts 0° & 6° (same tilt angle for both bands) 0° (same tilt angle for both bands)40 degree cone Front-to-back ratio >26 dB > 25 dBSuppression of first upper side lobe >16 dB > 16 dBFirst lower null fill N/A (806 to 896 MHz) N/A (806 to 896 MHz)

>-17 dB (1850 to 1990 MHz) > -17 dB (1850 to 1990 MHz)Maximum CW input power, per band 600W (806 to 896 MHz) 600W (806 to 896 MHz)

350W (1850 to 1990 MHz) 350W (1850 to 1990 MHz)Typical maximum combined input power 300W (806 to 896 MHz) 300W (806 to 896 MHz)

175W (1850 to 1990 MHz) 175W (1850 to 1990 MHz)Two tone intermodulation 3rd order (800 MHz) <-107 dBm for 2x20 W <-107 dBm for 2x20W

(150 dBc at 2x43 dBm ) (150 dBc at 2x43 dBm)Two tone intermodulation 3rd order (1900 MHz) <-104 dBm for 2x20W <-104 dBm for 2x20W

(147 dBc at 2x43 dBm) (147 dBc at 2x43 dBm)

Mechanical Specifications

Connector 7/16 DIN bottom mounted 7/16 DIN bottom mountedHeight 53.1" (1350 mm) 28.7" (720 mm)Width 11" (280 mm) 11" (280 mm)Depth 4.9" (125 mm) 4.9" (125 mm)Weight 20.7 lbs (9.4 kg) 10.7 lbs (4.9 kg)Survival wind speed 156 mph (70 m/s) 156 mph (70 m/s)Maximum wind area 4.1 sq.ft (0.38 sq.m) 2.2 sq.ft (0.2 sq.m)Frontal wind load @100 mph (C=1) 107 lbf (476 N) 57 lbf (254 N)

*All feed network components DC grounded for Lightning Protection

Mounting Hardware Options for Installation1) Pole mount 2165.10 2165.102) Combined pole mount and downtilt bracket 7254.10 (-0.6° to 15°) 7254.10 (-1.3° to 31°)

CommentsGain is typical within frequency band.Front-to-back ratio is defined within 20° from the backwards direction in any plane.Sidelobe suppression and null fill is relative to peak of main beam.Radome color is NCS 2502-B (RAL 7035)(gray).

-40-35-30-25-20-15-10-50

Typical Horizontal and Vertical 7334.00 Patterns at 800 MHz

-40

-35

-30

-25

-20

-15

-10

-5

0

Typical Horizontal and Vertical 7334.00 Patterns at 1900 MHz

Scheduled to be released in year 2000

Page 64: Catalog, Allgon - Swedcom

Connector 7/16 DIN plug all three portsHeight 2" (50 mm)Width 7.5" (190 mm)Depth 2.4" (60 mm) excluding connectorsWeight 3.1 lbs (1.4 kg)Housing IP 65Temperature Range, Operational -40°C to +55°CTemperature Range, Storage -45°C to +85°C

D u a l B a n d F i l t e r P a g e 6 6

8 0 0 / 1 9 0 0 M H z D u a l B a n d F i l t e r8

00

/19

00

MH

z D

ua

l B

an

d F

ilte

r

Preliminary Electrical Specifications 9215.03

Frequency Range 806-894 MHz and 1850-1990 MHzIsolation > 50 dB between the single band portsInsertion Loss, 800 MHz < 0.2 dB between the combined and 800 MHz portInsertion Loss, 1900 MHz < 0.3 dB between the combined and 1900 MHz portReturn Loss > 20 dB all portsMaximum Average Power 500W (800 MHz) or 250W (1900 MHz)Typical Combined Maximum Average Power 250W (800 MHz) and 125W (1900 MHz)Two tone intermodulation 3rd order < -110 dBm for 2x20W (153 dBc at 2x43 dBm)Lightning Protection IEC 1312-1 and IEC 1000-4-5Note: Electrical specifications under normal operating conditions with an antenna Return Loss betterthan 14 dB, 1.5:1 VSWR.

Preliminary Mechanical Specifications

9215.03 Filter Curves

-70

-60

-50

-40

-30

-20

-10

0

800 920 1040 1160 1280 1400 1520 1640 1760 1880 2000Frequency [MHz]

800 MHz port toCombined port

800 MHz port to1900 MHz port

1900 MHz port toCombined port

Scheduled to be released in year 2000In

sert

ion

Loss

(dB

)

Page 65: Catalog, Allgon - Swedcom

Mo

un

ting

Bra

cke

tsM o u n t i n g B r a c k e t s

Allgon Mounting Brackets are made with only the highest quality acid proof stainless steel. They will easilywithstand the most severe environments.

The tilt and panning sets are designed to be used as an integral part of the antenna. The end caps of each antennaare design to mount directly to the panning or tilting bracket without the use of intermediate parts. This simplifieddesign gives ease of use as well as increased performance and reliability. The performance of our mountingconfigurations and settings, including panning and tilting brackets, are verified through vibration testing.

Our Antennas can be mounted in three ways:1. Vertically, using heavy-duty clamps2. Vertically, using heavy-duty clamps and tilt brackets3. Vertically, using heavy-duty clamps, panning brackets and tilt brackets

B a s e S t a t i o n A n t e n n a s P a g e 6 7

Bracket Options

Bracket Type2165.102165.117254.107254.112201.102201.112190.10

2187.0000

Pole/Wall bracket for 2 mounting pointsPole/Wall bracket for 3 mounting pointsCombined pole mount and tilt bracket for 2 mounting pointsCombined pole mount and tilt bracket for 3 mounting pointsPanning bracket for 2165.10 and 7254.10Panning bracket for 2165.11 and 7254.11Hose clamp kit for pole diameter 40-100Upside-down kit for Omni

2201.10 & 7254.10 2165.10 7254.10

7254.10 Omni Mounting 7254.10

Page 66: Catalog, Allgon - Swedcom

T e s t i n g P r o c e d u r e s

Performance

Reliability

Allgon prides itself on stringent testing requirements with conservative, yet realistic claims of the performance of ourproduct offering. Our antennas are evaluated on performance and reliability.

Electrical performance can be subdivided into a set of parameters/tests that characterizes the antennas ability tofunction well; however, good performance is also the sign of good quality and that a lot of effort has been put into the an-tenna at the design stage. Every Allgon antenna is verified with the following list of parameters:

Radiation PatternHorizontal Beamwidth Electrical tilt angleElevational beamwidth Front-to-Back RatioFirst upper sidelobe suppression First null fill below horizon

Intermodulation ProductsGainPower HandlingReturn LossLightning ProtectionDurability

The mechanical stability of an antenna directly effects its electrical performance, therefore our antennas are designed towithstand the harshest conditions and still perform appropriately. Allgon antennas are mechanically verified by the fol-lowing sequence:

Vibration IEC 68-2-2, test Fc, 5-150 Hz, displacement +0.5 mm or 2 g, 1 octave/min, 1.5 hours atresonance frequency, test in three directions

Coldness IEC 68-2-1, test Ab, 16 hours at -55°C +3°CHeat IEC 68-2-2, test Bb, 16 hours at +75°C +2°CTemperatureChanges IEC 68-2-14, test Nb, -40°C+ 2°C to + 70°C+ 5°C, 10 cycles at 2+2 hoursSalt Mist IEC 68-2-11, test Ka, neutral salt mist for 96 hoursHumidity IEC 68-2-30, test Db, 10 cycles at 24 hours in 90% - 98% rel. humidity at 25°C +3°C to

40°C +2°CRain IEC 68-2-18 , test Rb 2.2, 30 min, 60° spray angleUV Radiation IEC 68-2-5, test Sa, procedure C, 56 days at + 40°CInput Power input power 200 W for 1 hourLightningProtection LEMP test with 100 kV/m field strength, 1.2/50 µs pulse. Current discharge with 170 kA

peak current.Drop 6 drop tests from 41 cm and 4 drop tests from 56 cm onto a flat steel surface. The 41 cm

drops are oriented onto edges and corners in 10 angles. The 56 cm drops are orientedwith point of equilibrium straight about the point of impact. No damage allowed onproduct.

Compression Load between two plane-parallel plates at 3 sides. The load is 7.0 kN, 5.1 kN and 0.4 kNon sides according to size, without damages on the product.

Vibration 120 min. random vibration in two axes simultaneously at a calibrated acceleration of 1.0 g. Frequency range 1-64 Hz. One hour in main direction and two other directions. Nodamage allowed on the product.

Shock 8 impacts in the horizontal direction. Acceleration 7.5 g, pulse 50 µs. No damage al-lowed on the product.

B a s e S t a t i o n A n t e n n a s P a g e 6 8

Test

ing

Pro

ced

ure

s

Page 67: Catalog, Allgon - Swedcom

Tow

er To

p A

mp

lifier

T o w e r T o p A m p l i f i e r

T o w e r T o p A m p l i f i e r P a g e 6 9

Features

• Ultra low weight and volume

• Low noise figure

• Customer adaptable band selection

• Fail safe automatic silicon based bypassand alarm

• Receive and duplex available

• Customized Alarm and Power DistributionUnit

• Optimized for Allgon Base Station Antennas

• Easy mounting

• Lightning protection

The Allgon TTA system consists of the TTA,mounted in close proximity to the antenna, and anAlarm and Power Distribution Unit (APDU)situated in or near the BTS. The APDU alsofacilitates an alarm and control function thatindicates malfunction and bypass in the TTA. TheAPDU will indicate an alarm if either one, or bothof the transistors in the LNA balanced pair has amalfunction. If one transistor fails, it is consideredas a minor alarm. If both transistors fail, it is amajor alarm and the TTA will go to bypass mode.The bypass can also be controlled manually via theAPDU front panel.

The APDU provides DC-power to six TTA’s byinjecting current onto the associated antennafeeder connected to each TTA. The supply currentis fed onto the feeders by means of the currentinjector (CI) which is placed in Receive and/orTransmit- signal path. The CI has a low loss RF-connection to the connector opposite to the cableentry on the CI. The DC-power is connected to theoutput connector, and isolated from the BTS sideof the unit. The DC-signal is low-pass filteredbefore leaving the unit at the DC-connector. The CIis also lightning protected.

System Configuration

The Allgon Tower Top Amplifier (TTA) for PCSapplications, is a small and lightweight productintended for systems where the operator wants toincrease the sensitivity in the up-link transmission.The TTA will enhance the system noise figure and,hence, make it possible either to increase the cellsite area coverage, or for the terminals to back offoutput power.

The TTA is especially useful in cell sites where longfeeders are used, i.e. where high cable lossdecreases the performance. The front end of theTTA is a PCS 35 MHz receive band filter, followedby a balanced pair of Low Noise Amplifiers(LNA´s). The TTA also features an automaticbypass in case of malfunction. Certain TTA modelsare designed without the bypass function toachieve a lower noise figure. The TTA is designedto withstand lightning.

Application

Page 68: Catalog, Allgon - Swedcom

Tower Top Amplifiers

8473.01 TTA 1900 MHz DUPLEX 35 MHz BW Rx 1850-1885/Tx 1930-1965 MHz PCS-ADB Band

8473.02 TTA 1900 MHz DUPLEX 25 MHz BW Rx 1885-1910/Tx 1965-1990 MHz PCS-EFC Band

8473.06 TTA 1900 MHz DUPLEX 30 MHz BW Rx 1865-1895/Tx 1945-1975 MHz PCS-DEF Band

8474.01 TTA 1900 MHz Rx only 35 MHz BW Rx 1850-1885 MHz PCS-ADB Band

8474.02 TTA 1900 MHz Rx only 25 MHz BW Rx 1885-1910 MHz PCS-EFC Band

8474.06 TTA 1900 MHz Rx only 30 MHz BW 1865-1895 MHz PCS-DEF Band

Alarm and Power Distribution Units8479.04 Indoor Alarm and Power Distribution Unit

9183.01 Outdoor Alarm and Power Distribution Unit

Current InjectorsIndoor Current Injector

Product Connectorsnumber ANT port BTS port

9221.01 7/16 male 7/16 female9221.02 N male N female9221.03 7/16 female 7/16 male9221.04 N female N male8484.01 7/16 female 7/16 male(6-port)

Outdoor Current Injector

Product Connectorsnumber ANT port BTS port

9184.01 7/16 male 7/16 female9184.03 N female N male9184.04 N male N female9184.05 7/16 female 7/16 male9184.06 7/16 female N male9184.07 N male N female9184.08 N female N male

T o w e r T o p A m p l i f i e r P a g e 7 0

Q U I C K R E F E R E N C E G U I D EO

fferin

gs fo

r the

Tow

er To

p A

mp

lifier

Accessories for Indoor Alarm & PowerDistribution Units8488.01 DC-cable, from APDU to Strip plate, Dsub-9

male to filtered Dsub-9 female, 1500 mm8489.01 DC-cable, from Strip plate to CI-6,

Dsub-9 male to Dsub-9 female, 800 mm8489.02 DC-cable, from Strip plate to CI-6,

Dsub-9 male to Dsub-9 female, 1600 mm8490.01 Alarm cable, from APDU to BTS,

Dsub-9 female to Euro, 1500 mm8496.01 DC-cable (octopus), from Strip plate to 6 x CI

Dsub-9 male to 6 x SMA male, 1500 mm8496.02 DC-cable (octopus), from Strip plate to 6 x CI

Dsub-9 male to 6 x SMA male, 2500 mm8496.03 DC-cable (octopus), from Strip plate to 6 x CI

Dsub-9 male to 6 x SMA male, 5000 mm8496.04 DC-cable (octopus), from Strip plate to 6 x CI

Dsub-9 male to 6 x SMA male, 7620 mm8497.01 Alarm cable, from APDU to Strip plate Dsub-

9 female to filtered Dsub-9 male, 1500 mm8498.01 Alarm cable, from Strip plate to open end

Dsub-9 female to open, 1300 mm8499.01 Strip plate9196.01 DC extension cable, from Strip plate to CI-6

(4 ) + 2 x CI, Dsub-9 male to Dsub-9 female, 50 mm, + 2 x SMA male, 6000 mm

Accessories for Outdoor Alarm & PowerDistribution Units9188.01 Alarm cable, from outdoor APDU

to BTS Framatom 8 pole female to Dsub-25 male, 3 m

9188.02 Alarm cable, from outdoor APDUto BTS Framatom 8 pole female to Dsub-25 male, 5 m

9195 .02 DC-cable, from outdoor APDU to Outdoor CI Open to Binder 718, 3 pole female, 10 m

Miscellaneous Hardware9173.01 Grounding strap for TTA, 400 mm9174.01 Grounding strap for CI, 150 mm9174.02 Grounding strap for CI, 400 mm9180.01 TTA wall mounting kit9253.02 DC power cable for CI, 500 mm

Page 69: Catalog, Allgon - Swedcom

T o w e r T o p A m p l i f i e r P a g e 7 1

T o w e r T o p A m p l i f i e rTo

we

r To

p A

mp

lifi

er

Specifications 8473 Duplexed TTA 1900 MHz Rx/Tx 8474 TTA 1900 MHz Rx only

TTA Reliability MTBF According to MIL-HDBK-217F, Ground Fixed (45 °C) > 140,000 hrTTA Return Loss for a 50 ohm system

Normal Operation: > 18 dB Rx and Tx > 18 dB RxBypass Operation: > 12 dB Rx > 18 dB Tx > 14 dB Rx

Band Rejection >95 dB Rx Branch >45 dB Tx Branch > 65 dB RxMaximum Input Power Without Damage +20 dBm Rx +49 dBm TxIntermodulation @ 2 -40 dBm in Receive Band, 2 +43 dBm in Transmit Band

BTS Port: <-97 dBm Rx <-70 dBm Tx <-110 dBm RxAntenna Port: <-110 dBm Rx <-70 dBm Tx <-110 dBm Rx

Gain 13 ±0.5 dB 12 ±0.5 dBBypass Insertion Loss < 2.5 dB, typical < 2.1 dB < 1.8 dBNoise Figure < 1.65 dB @ 20°C (no bypass) < 2.1 dB @ 20°C (with bypass)

< 1.80 dB @ 20°C (with bypass)3rd Order Input Intercept Point (IIP3) > +10 dBm1 dB Compression Point at Output +8 dBmCurrent Consumption Ino = 130 ±15 mAVoltage Nominal: 12 VDC Full Operation: 8-17 VDCPower Consumption < 2 WDimensions, Including Cover 8 inches x 7.5 inches x 3.9 inches (203 mm 190 mm 100 mm)Weight, Including Cover < 8 lbs (< 3.6 kg) < 6.9 lbs (< 3.1 kg)Wind Load < 18.9 lbs (84N) @ 93 mph (150 km/hr) all sidesStorage Class T1.2 in accordance with ETS 300 019-1-1Transportation Class T2.3 in accordance with ETS 300 019-1-2Operation Class T4.1 in accordance with ETS 300 019-1-4 in non-weather protected environmentsHousing IP 65Lightning Protection According to IEC 1312-1 and IEC 1000-4-5, protection class 4

9184 Outdoor Current Injector 9221 Indoor Current Injector

Insertion Loss < 0.2 dB [ 820-1000 MHz, 1700 - 1990 MHz]Maximum Continuous Tx Power 4 x 40 dBm 2 x 43 dBm, or 1 x 50 dBm [820 - 1990 MHz]Return Loss > 20 dB [ 820-1000 MHz, 1700 - 1990 MHz] (with opposite port terminated)Intermodulation Products <-110 dBm Rx and <-70 dBm Tx (with 4 x 40 dBm carriers in Tx band)Dimensions 4.2 inches x 2.3 inches x 1.6 inches 4.2 inches x 2.3 inches x 1.4 inches

(107 mm x 60 mm x 40 mm) (107 mm x 60 mm x 36 mm) (including connectors) (including connectors)

Weight < 1.3 lbs (<0.6 kg) < 1.1 lbs (<0.5 kg)Storage Class T1.2 in accordance with ETS 300 019-1-1Transportation Class T2.3 in accordance with ETS 300 019-1-2Operation Class T4.1 in accordance Class T3.3 in accordance

with ETS 300 019-1-4 with ETS 300 019-1-3in non-weather protected environments in weather protected environments

Housing IP 66 IP 44Lightning Protection According to IEC 1000-4-5 and IEC 1312-1, protections class 4.

Specifications

Page 70: Catalog, Allgon - Swedcom

Tow

er To

p A

mp

lifier

T o w e r T o p A m p l i f i e r

T o w e r T o p A m p l i f i e r P a g e 7 2

9183 Outdoor Alarm 8479 Indoor Alarm and Power Distribution Unit and Power Distribution Unit

Input Voltage -20 to -70 VDC ±34 to ±72 VDCInput Current < 2 A < 2 AInput Protection Fuse, 2 A slow Reversed voltage diode protection Fuse, 2 A slow Reversed voltage diode protectionOutput Voltage 12 VDC +3 to -0.5 VDC 12 VDC +3 to -0.5 VDCOutput Protection Fuse, 500 mA slow Reverse voltage diode protection Fuse, 500 mA slow Reverse voltage diode protectionOutput Current, each DC output Normal operation: Ino =130±15 mA Normal operation: Ino =130±15 mA

One transistor fail: 180 mA <IMi < 250 mA One transistor fail: 180 mA <IMi < 250 mATwo transistor fail: IMa >250 mA Two transistor fail: IMa >250 mA

Dimensions 7.9 inches x 11.8 inches x 5.9 inches 1.7 inches x 19 inches x 6.7 inches(200 mm x 300 mm x 150 mm) (44 mm x 483 mm x 170 mm)

Weight <13.2 lbs (< 6 kg ) <5.8 lbs (< 2.6 kg)Storage Class T1.2 in accordance with ETS 300 019-1-1 Class T1.2 in accordance with ETS 300 019-1-1Transportation Class T2.3 in accordance with ETS 300 019-1-2 Class T2.3 in accordance with ETS 300 019-1-2

in non-weather protected environments in non-weather protected environmentsOperation Class T4.1 in accordance Class T3.3 in accordance

with ETS 300 019-1-4 with ETS 300 019-1-3in non-weather protected environments in weather protected environments

Housing IP 65 Mounting is designed for a standard 19 inch rack

Two-Sector Site Configuration

Specifications

Page 71: Catalog, Allgon - Swedcom

2165.10 BRACKET KIT 2 MNTPOINTS 672165.11 BRACKET KIT 3 MNTPOINTS 672187.0000 UPSIDE-DOWN KIT OMNI 672190.10 HOSE CLIPS 2x40-110 672201.10 PANNING WALLBRACKET 2MNTPOINTS 672201.11 PANNING WALLBRACKET 3MNTPOINTS 674168.11.05.00 O-900-360-11i-0-N 564168.11.05.02 O-900-360-11i-2-N 564168.11.05.03 O-900-360-11i-3-N 564168.11.05.06 O-900-360-11i-6-N 564168.11.05.52 O-900-360-11i+2-N 564168.11.05.53 O-900-360-11i+3-N 564168.11.33.00 O-900-360-11i-0-D 564168.11.33.02 O-900-360-11i-2-D 564168.11.33.03 O-900-360-11i-3-D 564168.11.33.06 O-900-360-11i-6-D 564168.11.33.52 O-900-360-11i+2-D 564168.11.33.53 O-900-360-11i+3-D 564168.21.05.00 O-800-360-11i-0-N 564168.21.05.03 O-800-360-11i-3-N 564168.21.05.07 O-800-360-11i-7-N 564168.21.33.00 O-800-360-11i-0-D 564168.21.33.03 O-800-360-11i-3-D 564168.21.33.07 O-800-360-11i-7-D 564168.31.05.03 O-900-360-10i-0<3-N 574168.31.33.03 O-900-360-10i-0<3-D 577120.16.05.00 A-800-110-13i-0-N 297120.16.33.00 A-800-110-13i-0-D 297120.20.05.00 A-800-110-11i-0-N 297125.14.05.00 A-800-60-13i-0-N 247125.14.33.00 A-800-60-13i-0-D 247125.16.05.00 A-800-60-16i-0-N 247125.16.33.00 A-800-60-16i-0-D 247125.16.33.06 A-800-60-16i-6-D 247125.18.05.00 A-800-60-18i-0-N 257125.18.33.00 A-800-60-18i-0-D 257129.12.33.00 A-800-85-9i-0-D 257129.14.05.00 A-800-85-11i-0-N 267129.14.33.00 A-800-85-11i-0-D 267129.16.05.00 A-800-85-15i-0-N 277129.16.33.00 A-800-85-15i-0-D 277129.20.05.00 A-800-85-13i-0-N 267129.20.33.00 A-800-85-13i-0-D 267129.32.05.00 A-800-85-12i-10-N 267129.32.33.00 A-800-85-12i-10-D 267130.14.05.00 A-800-95-11i-0-N 277130.14.33.00 A-800-95-11i-0-D 277130.16.05.00 A-800-95-14i-0-N 287130.16.33.00 A-800-95-14i-0-D 287130.16.33.06 A-800-95-14i-6-D 287130.18.05.00 A-800-95-16i-0-N 287130.18.33.00 A-800-95-16i-0-D 287131.16.05.00 A-800-40-18i-0-N 237131.16.33.00 A-800-40-18i-0-D 237131.20.05.00 A-800-40-16i-0-N 237131.20.33.00 A-800-40-16i-0-D 237131.30.05.00 A-800-40-14i-15-N 237131.30.33.00 A-800-40-14i-15-D 237143.21.05.00 CI-800-60-10i-0-N 327143.21.33.00 CI-800-60-10i-0-D 327143.22.05.00 CI-800-60-13i-0-N 327143.22.33.00 CI-800-60-13i-0-D 327143.23.05.00 CI-800-60-14i-0-N 337143.23.33.00 CI-800-60-14i-0-D 337143.24.05.00 CI-800-60-15.5i-0-N 337143.24.05.05 CI-800-60-15.5i-5-N 337143.24.05.06 CI-800-60-15.5i-6-N 337143.24.05.09 CI-800-60-15.5i-9-N 337143.24.05.50 CI-800-60-15i-A-N 467143.24.33.00 CI-800-60-15.5i-0-D 337143.24.33.06 CI-800-60-15.5i-6-D 337143.24.33.09 CI-800-60-15.5i-9-D 337143.24.33.50 CI-800-60-15i-A-D 467143.24.34.50 CI-800-60-15i-A-D-B 467143.26.05.00 CI-800-60-17i-0-N 34

7143.26.05.04 CI-800-60-17i-4-N 347143.26.05.06 CI-800-60-17i-6-N 347143.26.05.08 CI-800-60-17i-8-N 347143.26.05.09 CI-800-60-17i-9-N 347143.26.33.00 CI-800-60-17i-0-D 347143.26.33.04 CI-800-60-17i-4-D 347143.26.33.06 CI-800-60-17i-6-D 347143.26.33.08 CI-800-60-17i-8-D 347143.26.34.00 CI-800-60-17i-0-D-B 347143.26.34.00.2 CI-7143.26.34.00+Jumper Cable 347143.48.05.00 CI-800-60-18i-0-N 347143.48.05.02 CI-800-60-18i-2-N 347143.48.05.05 CI-800-60-18i-5-N 347143.48.05.06 CI-800-60-18i-6-N 347143.48.33.00 CI-800-60-18i-0-D 347143.48.33.02 CI-800-60-18i-2-D 347143.48.33.05 CI-800-60-18i-5-D 347143.48.33.06 CI-800-60-18i-6-D 347144.21.05.00 CI-800-90-8.5i-0-N 357144.21.33.00 CI-800-90-8.5i-0-D 357144.22.05.00 CI-800-90-11i-0-N 357144.22.33.00 CI-800-90-11i-0-D 357144.23.05.00 CI-800-90-12.5i-0-N 367144.23.33.00 CI-800-90-12.5i-0-D 367144.24.05.00 CI-800-90-14i-0-N 367144.24.05.50 CI-800-90-13.5i-A-N 467144.24.33.00 CI-800-90-14i-0-D 367144.24.33.50 CI-800-90-13.5i-A-D 467144.24.34.50 CI-800-90-13.5i-A-D-B 467144.26.05.00 CI-800-90-15i-0-N 377144.26.05.04 CI-800-90-15i-4-N 377144.26.05.06 CI-800-90-15i-6-N 377144.26.05.08 CI-800-90-15i-8-N 377144.26.05.09 CI-800-90-15i-9-N 377144.26.05.10 CI-800-90-15i-10-N 377144.26.33.00 CI-800-90-15i-0-D 377144.26.33.04 CI-800-90-15i-4-D 377144.26.33.08 CI-800-90-15i-8-D 377144.26.34.00 CI-800-90-15i-0-D-B 377144.26.34.00.2 CI-7144.26.34.00+Jumper Cable 377144.48.05.00 CI-800-90-16.5i-0-N 377144.48.05.02 CI-800-90-16.5i-2-N 377144.48.05.05 CI-800-90-16.5i-5-N 377144.48.33.00 CI-800-90-16.5i-0-D 377144.48.33.02 CI-800-90-16.5i-2-D 377144.48.33.05 CI-800-90-16.5i-5-D 377145.21.05.00 CI-800-105-8i-0-N 387145.21.33.00 CI-800-105-8i-0-D 387145.22.05.00 CI-800-105-11i-0-N 387145.22.33.00 CI-800-105-11i-0-D 387145.23.05.00 CI-800-105-12.5i-0-N 397145.23.33.00 CI-800-105-12.5i-0-D 397145.24.05.00 CI-800-105-13.5i-0-N 397145.24.05.50 CI-800-105-13i-A-N 477145.24.33.00 CI-800-105-13.5i-0-D 397145.24.33.50 CI-800-105-13i-A-D 477145.24.34.50 CI-800-105-13i-A-D-B 477145.26.05.00 CI-800-105-14.5i-0-N 407145.26.33.00 CI-800-105-14.5i-0-D 407145.48.05.00 CI-800-105-16i-0-N 407145.48.05.05 CI-800-105-16i-5-N 407145.48.33.00 CI-800-105-16i-0-D 407145.48.33.05 CI-800-105-16i-5-D 407146.21.05.00 CI-800-120-7.5i-0-N 417146.21.33.00 CI-800-120-7.5i-0-D 417146.22.05.00 CI-800-120-10.5i-0-N 417146.22.33.00 CI-800-120-10.5i-0-D 417146.23.05.00 CI-800-120-11.5i-0-N 427146.23.33.00 CI-800-120-11.5i-0-D 427146.24.05.00 CI-800-120-12.5i-0-N 427146.24.05.50 CI-800-120-12i-A-N 477146.24.33.00 CI-800-120-12.5i-0-D 427146.24.33.50 CI-800-120-12i-A-D 477146.24.34.50 CI-800-120-12i-A-D-B 477146.26.05.00 CI-800-120-14.5i-0-N 437146.26.05.06 CI-800-120-14i-6-N 437146.26.05.08 CI-800-120-14i-8-N 437146.26.33.00 CI-800-120-14.5i-0-D 437146.26.33.02 CI-800-120-14.5i-2-D 437146.26.33.06 CI-800-120-14i-6-D 437146.26.33.08 CI-800-120-14i-8-D 437146.26.34.00 CI-800-120-14.5i-0-D-B 437146.48.05.00 CI-800-120-15.5i-0-N 43

Part Number Product Description Page Part Number Product Description Page

I n d e x P a g e 7 7

Organized by Part Number

Page 72: Catalog, Allgon - Swedcom

7146.48.33.00 CI-800-120-15.5i-0-D 437146.48.34.00 CI-800-120-15.5i-0-D-B 437182.12 M-1900-65-18i-3-D 87182.13 M-1900-65-18i-4-D 87182.14 M-1900-65-18i-2-D 87182.15 M-1900-65-18i-0-D 87182.16 M-1900-65-18i-4-D-U 87182.20 M-1900-65-18i-8-D 87182.21 M-1900-65-17.5i-10-D 87182.23 M-1900-65-18i-5-D 87182.25 M-1900-65-18i-6-D 87183.08 M-1900-65-17i-2-D-U 87183.12 M-1900-65-17i-4-D 87183.14 M-1900-65-17i-2-D 87183.15 M-1900-65-17i-0-D 87183.16 M-1900-65-17i-6-D 87183.17 M-1900-65-17i-8-D 87183.18 M-1900-65-17i-3-D 87184.07 M-1900-90-16.5i-6-D 117184.13 M-1900-90-16.5i-4-D 117184.14 M-1900-90-16.5i-2-D 117184.15 M-1900-90-16.5i-0-D 117184.17 M-1900-90-16.5i-2-D-U 117184.18 M-1900-90-16.5i-0-D-U 117184.20 M-1900-90-16.5i-3-D 117185.03 M-1900-30-20i-2-D 67185.04 M-1900-30-20i-2-D-U 67185.07 M-1900-30-20i-4-D 67185.08 M-1900-30-20i-0-D 67190.01 CO-850-74-8.5i-0-S 567193.01 CO-1800/1900-65-10i-0-N 567194.03 M-1900-90-13.5i-4-D 107194.07 M-1900-90-13.5i-2-D 107194.12 M-1900-90-13.5i-10-D 107194.15 M-1900-90-13.5i-0-D 107195.03 M-1900-65-15i-4-D 77195.07 M-1900-65-15i-10-D 77195.15 M-1900-65-15i-0-D 77195.18 M-1900-65-15i-12-D 77198.10 M-1900-90-15.5i-4-D 107198.14 M-1900-90-15.5i-2-D 107198.15 M-1900-90-15.5i-0-D 107199.01 M-1900-90-19.5i-2-D 127199.02 M-1900-90-19.5i-0-D 127200.01 M-1900-90-18i-2-D 117200.02 M-1900-90-18i-2-D-U 117200.05 M-1900-90-18i-0-D 117200.07 M-1900-90-18i-4-D-U 117200.07 M-1900-90-18i-4-D 117200.08 M-1900-90-18i-6-D 117200.09 M-1900-90-18i-3-D 117200.10 M-1900-90-18i-5-D 117204.15 M-1900-90-11.5i-0-D 97205.15 M-1900-65-12.5i-0-D 77208.01 M-1900-105-16i-2-D 127208.05 M-1900-105-16i-6-D 127208.06 M-1900-105-16i-0-D 127220.08 M-1900-65-20i-0-D 97220.10 M-1900-65-20i-4-D 97220.11 M-1900-65-20i-5-D 97220.13 M-1900-65-20i-7-D 97220.14 M-1900-65-20i-2-D 97220.15 M-1900-65-20i-2-D-U 97220.16 M-1900-65-19.5i-10-D 97220.17 M-1900-65-20i-0-D-U 97221.13 M-1900-30-23i-7-D 67221.14 M-1900-30-23i-1-D 67221.15 M-1900-30-23i-2-D 67221.16 M-1900-30-23i-4-D 67221.17 M-1900-30-23i-1-D-U 67250.02 XM-1900-65-18.5i-0-D 157250.03 XM-1900-65-18.5i-2-D 157250.04 XM-1900-65-18.5i-4-D 157251.01 XM-1900-90-17.5i-2-D 177251.02 XM-1900-90-17.5i-0-D 177251.03 XM-1900-90-17.5i-4-D 177251.04 XM-1900-90-17.5i-6-D 177251.05 XM-1900-90-17.5i-2-D-U 177254.10 TILTBRACKET 2 MNTPOINTS 677254.11 TILTBRACKET 3 MNTPOINTS 677262.01 XM-1900-90-16i-0-D 177262.02 XM-1900-90-16i-2-D 177262.03 XM-1900-90-16i-4-D 17

7263.01 XU-800-65-15i-0-D 197263.02 XU-800-65-15i-0-N 197263.04 XU-800-65-14.5i-6-D 197263.05 XU-800-65-14.5i-6-N 197270.01 U-800-65-12.5i-0-N 507270.02 U-800-65-12.5i-0-D 507271.01 U-800-65-15.5i-0-N 507271.02 U-800-65-15.5i-0-D 507271.03 U-800-65-15.5i-5-D 507272.01 U-800-65-16.5i-0-N 517272.02 U-800-65-16.5i-0-D 517273.01 U-800-65-18i-0-N 517273.02 U-800-65-18i-0-D 517273.03 U-800-65-17.5i-4-D 517275.01 U-800-90-11.5i-0-N 527275.02 U-800-90-11.5i-0-D 527276.01 U-800-90-14i-0-N 527276.02 U-800-90-14i-0-D 527277.01 U-800-90-15i-0-N 537277.02 U-800-90-15i-0-D 537278.01 U-800-90-16i-0-N 537278.02 U-800-90-16i-0-D 537281.02 XU-800-65-16.5i-0-D 197282.03 XU-800-65-12.5i-4-D 187282.04 XU-800-65-12.5i-4-N 187301.02 XM-1900-90-13.5i-0-D 167332.00 ALVC-800/1900-80-14.0/17.0-0D 647332.02 ALVC-800/1900-80-14.0/17.0-2D 647332.06 ALVC-800/1900-80-14.0/17.0-6D 647333.00 ALVC-800/1900-70-14.5/17.5-0D 637333.06 ALVC-800/1900-70-14.5/17.5-6D 637334.00 ALVC-800/1900-90-13.5/16.5-0D 657334.06 ALVC-800/1900-90-13.5/16.5-6D 657336.00 ALIC-8/9/18/19/2100-360-3i-0-N 567337.00 ALVC-800/1900-70-12.0/15.0-0D 637338.00 ALVC-800/1900-80-11.5/14.5-0D 647339.00 ALVC-800/1900-90-11.0/14.0-0D 65739x.00 ALX-800-90-xx.xi-0-D 20739x.06 ALX-800-90-xx.xi-6-D 208473.01 TTA PCS Duplex 718473.02 TTA PCS Duplex 718473.06 TTA PCS Duplex 718474.01 TTA PCS Receive 718474.02 TTA PCS Receive 718474.06 TTA PCS Receive 718479.02 APDU without Allgon logo (LPA) 728479.04 APDU without Allgon logo (USA) 728484.01 Current injector 6-port, Indoor 708490.01 CABLE ALARM 708496.01 CABLE OCTOPUS 708496.02 CABLE OCTOPUS 708496.03 CABLE OCTOPUS 708496.04 CABLE OCTOPUS 709173.01 CABLE EARTH STRAP L=400 709174.01 CABLE EARTH STRAP L=150 709174.02 CABLE EARTH STRAP L=400 709183.01 APDU outdoor 729183.02 APDU outdoor 729184.01 Current injector 1-port, Outdoor 719184.03 Current injector 1-port, Outdoor 719184.04 Current injector 1-port, Outdoor 719184.05 Current injector 1-port, Outdoor 719184.06 Current injector 1-port, Outdoor 719184.07 Current injector 1-port, Outdoor 719184.08 Current injector 1-port, Outdoor 719221.01 Current Injector indoor 7/16 719221.02 Current Injector indoor N 719221.03 Current injector 1-port, Indoor 719221.04 Current injector 1-port, Indoor 719254.01 CI 48V/4A - PCN-PCS-GSM 759254.02 CI 48V/4A - PCN-PCS-GSM 759254.03 CI 48V/4A - PCN-PCS-GSM 759254.04 CI 48V/4A - PCN-PCS-GSM 759256.01 TTPA PCS 1900 759256.02 TTPA PCS 1900 75ALVC => Allgon Vertical CombinedALX => Allgon Cross polarizedA => Allgon log periodicCI => City M => MetroO => OmniU => UrbanXM => Cross polarized MetroXU => Cross polarized Urban

Part Number Product Description Page Part Number Product Description Page

I n d e x P a g e 7 8

Organized by Part Number

Page 73: Catalog, Allgon - Swedcom

7336.00 ALIC-8/9/18/19/2100-360-3i-0-N 567333.00 ALVC-800/1900-70-14.5/17.5-0D 637333.06 ALVC-800/1900-70-14.5/17.5-6D 637337.00 ALVC-800/1900-70-12.0/15.0-0D 637332.00 ALVC-800/1900-80-14.0/17.0-0D 647332.02 ALVC-800/1900-80-14.0/17.0-2D 647332.06 ALVC-800/1900-80-14.0/17.0-6D 647338.00 ALVC-800/1900-80-11.5/14.5-0D 647334.00 ALVC-800/1900-90-13.5/16.5-0D 657334.06 ALVC-800/1900-90-13.5/16.5-6D 657339.00 ALVC-800/1900-90-11.0/14.0-0D 65739x.00 ALX-800-90-xx.xi-0-D 20739x.06 ALX-800-90-xx.xi-6-D 207131.20.33.00 A-800-40-16i-0-D 237131.20.05.00 A-800-40-16i-0-N 23 7131.30.33.00 A-800-40-14i-15-D 237131.30.05.00 A-800-40-14i-15-N 237131.16.33.00 A-800-40-18i-0-D 237131.16.05.00 A-800-40-18i-0-N 237125.14.33.00 A-800-60-13i-0-D 247125.14.05.00 A-800-60-13i-0-N 247125.16.33.00 A-800-60-16i-0-D 247125.16.05.00 A-800-60-16i-0-N 247125.16.33.06 A-800-60-16i-6-D 247125.18.33.00 A-800-60-18i-0-D 257125.18.05.00 A-800-60-18i-0-N 257129.12.33.00 A-800-85-9i-0-D 257129.14.33.00 A-800-85-11i-0-D 267129.14.05.00 A-800-85-11i-0-N 267129.20.33.00 A-800-85-13i-0-D 267129.20.05.00 A-800-85-13i-0-N 267129.32.33.00 A-800-85-12i-10-D 267129.32.05.00 A-800-85-12i-10-N 267129.16.33.00 A-800-85-15i-0-D 277129.16.05.00 A-800-85-15i-0-N 277130.14.33.00 A-800-95-11i-0-D 277130.14.05.00 A-800-95-11i-0-N 277130.16.33.00 A-800-95-14i-0-D 287130.16.05.00 A-800-95-14i-0-N 287130.16.33.06 A-800-95-14i-6-D 287130.18.33.00 A-800-95-16i-0-D 287130.18.05.00 A-800-95-16i-0-N 287120.20.05.00 A-800-110-11i-0-N 297120.16.33.00 A-800-110-13i-0-D 297120.16.05.00 A-800-110-13i-0-N 297143.21.33.00 CI-800-60-10i-0-D 327143.21.05.00 CI-800-60-10i-0-N 327143.22.33.00 CI-800-60-13i-0-D 327143.22.05.00 CI-800-60-13i-0-N 327143.23.33.00 CI-800-60-14i-0-D 337143.23.05.00 CI-800-60-14i-0-N 337143.24.33.50 CI-800-60-15i-A-D 467143.24.34.50 CI-800-60-15i-A-D-B 467143.24.05.50 CI-800-60-15i-A-N 467143.24.33.00 CI-800-60-15.5i-0-D 337143.24.05.00 CI-800-60-15.5i-0-N 337143.24.05.05 CI-800-60-15.5i-5-N 337143.24.33.06 CI-800-60-15.5i-6-D 337143.24.05.06 CI-800-60-15.5i-6-N 337143.24.33.09 CI-800-60-15.5i-9-D 337143.24.05.09 CI-800-60-15.5i-9-N 337143.26.33.00 CI-800-60-17i-0-D 347143.26.34.00 CI-800-60-17i-0-D-B 347143.26.34.00.2 CI-7143.26.34.00+Jumper Cable 347143.26.05.00 CI-800-60-17i-0-N 347143.26.33.04 CI-800-60-17i-4-D 347143.26.05.04 CI-800-60-17i-4-N 347143.26.33.06 CI-800-60-17i-6-D 347143.26.05.06 CI-800-60-17i-6-N 347143.26.33.08 CI-800-60-17i-8-D 347143.26.05.08 CI-800-60-17i-8-N 347143.26.05.09 CI-800-60-17i-9-N 347143.48.33.00 CI-800-60-18i-0-D 347143.48.05.00 CI-800-60-18i-0-N 347143.48.33.02 CI-800-60-18i-2-D 347143.48.05.02 CI-800-60-18i-2-N 347143.48.33.05 CI-800-60-18i-5-D 347143.48.05.05 CI-800-60-18i-5-N 34

7143.48.33.06 CI-800-60-18i-6-D 347143.48.05.06 CI-800-60-18i-6-N 347144.21.33.00 CI-800-90-8.5i-0-D 357144.21.05.00 CI-800-90-8.5i-0-N 357144.22.33.00 CI-800-90-11i-0-D 357144.22.05.00 CI-800-90-11i-0-N 357144.23.33.00 CI-800-90-12.5i-0-D 367144.23.05.00 CI-800-90-12.5i-0-N 367144.24.33.50 CI-800-90-13.5i-A-D 467144.24.34.50 CI-800-90-13.5i-A-D-B 467144.24.05.50 CI-800-90-13.5i-A-N 467144.24.33.00 CI-800-90-14i-0-D 367144.24.05.00 CI-800-90-14i-0-N 367144.26.33.00 CI-800-90-15i-0-D 377144.26.34.00 CI-800-90-15i-0-D-B 377144.26.34.00.2 CI-7144.26.34.00+Jumper Cable 377144.26.05.00 CI-800-90-15i-0-N 377144.26.33.04 CI-800-90-15i-4-D 377144.26.05.04 CI-800-90-15i-4-N 377144.26.05.06 CI-800-90-15i-6-N 377144.26.33.08 CI-800-90-15i-8-D 377144.26.05.08 CI-800-90-15i-8-N 377144.26.05.09 CI-800-90-15i-9-N 377144.26.05.10 CI-800-90-15i-10-N 377144.48.33.00 CI-800-90-16.5i-0-D 377144.48.05.00 CI-800-90-16.5i-0-N 377144.48.33.02 CI-800-90-16.5i-2-D 377144.48.05.02 CI-800-90-16.5i-2-N 377144.48.33.05 CI-800-90-16.5i-5-D 377144.48.05.05 CI-800-90-16.5i-5-N 377145.21.33.00 CI-800-105-8i-0-D 387145.21.05.00 CI-800-105-8i-0-N 387145.22.05.00 CI-800-105-11i-0-N 387145.22.33.00 CI-800-105-11i-0-D 387145.23.05.00 CI-800-105-12.5i-0-N 397145.23.33.00 CI-800-105-12.5i-0-D 397145.24.33.50 CI-800-105-13i-A-D 477145.24.34.50 CI-800-105-13i-A-D-B 477145.24.05.50 CI-800-105-13i-A-N 477145.24.33.00 CI-800-105-13.5i-0-D 397145.24.05.00 CI-800-105-13.5i-0-N 397145.26.33.00 CI-800-105-14.5i-0-D 407145.26.05.00 CI-800-105-14.5i-0-N 407145.48.33.00 CI-800-105-16i-0-D 407145.48.05.00 CI-800-105-16i-0-N 407145.48.33.05 CI-800-105-16i-5-D 407145.48.05.05 CI-800-105-16i-5-N 407146.21.33.00 CI-800-120-7.5i-0-D 417146.21.05.00 CI-800-120-7.5i-0-N 417146.22.33.00 CI-800-120-10.5i-0-D 417146.22.05.00 CI-800-120-10.5i-0-N 417146.23.33.00 CI-800-120-11.5i-0-D 427146.23.05.00 CI-800-120-11.5i-0-N 427146.24.33.50 CI-800-120-12i-A-D 477146.24.34.50 CI-800-120-12i-A-D-B 477146.24.05.50 CI-800-120-12i-A-N 477146.24.33.00 CI-800-120-12.5i-0-D 427146.24.05.00 CI-800-120-12.5i-0-N 427146.26.33.00 CI-800-120-14.5i-0-D 437146.26.34.00 CI-800-120-14.5i-0-D-B 437146.26.05.00 CI-800-120-14.5i-0-N 437146.26.33.02 CI-800-120-14.5i-2-D 437146.26.33.06 CI-800-120-14i-6-D 437146.26.05.06 CI-800-120-14i-6-N 437146.26.33.08 CI-800-120-14i-8-D 437146.26.05.08 CI-800-120-14i-8-N 437146.48.33.00 CI-800-120-15.5i-0-D 437146.48.34.00 CI-800-120-15.5i-0-D-B 437146.48.05.00 CI-800-120-15.5i-0-N 437190.01 CO-850-74-8.5i-0-S 567193.01 CO-1800/1900-65-10i-0-N 567185.08 M-1900-30-20i-0-D 67185.03 M-1900-30-20i-2-D 67185.04 M-1900-30-20i-2-D-U 67185.07 M-1900-30-20i-4-D 67221.14 M-1900-30-23i-1-D 67221.17 M-1900-30-23i-1-D-U 67221.15 M-1900-30-23i-2-D 67221.16 M-1900-30-23i-4-D 67221.13 M-1900-30-23i-7-D 67205.15 M-1900-65-12.5i-0-D 77195.15 M-1900-65-15i-0-D 7

Part Number Product Description Page Part Number Product Description Page

I n d e x P a g e 7 9

Organized by Product Description

Page 74: Catalog, Allgon - Swedcom

7195.07 M-1900-65-15i-10-D 77195.18 M-1900-65-15i-12-D 77195.03 M-1900-65-15i-4-D 77183.15 M-1900-65-17i-0-D 87183.14 M-1900-65-17i-2-D 87183.08 M-1900-65-17i-2-D-U 87183.18 M-1900-65-17i-3-D 87183.12 M-1900-65-17i-4-D 87183.16 M-1900-65-17i-6-D 87183.17 M-1900-65-17i-8-D 87182.15 M-1900-65-18i-0-D 87182.14 M-1900-65-18i-2-D 87182.12 M-1900-65-18i-3-D 87182.13 M-1900-65-18i-4-D 87182.16 M-1900-65-18i-4-D-U 87182.23 M-1900-65-18i-5-D 87182.25 M-1900-65-18i-6-D 87182.20 M-1900-65-18i-8-D 87182.21 M-1900-65-17.5i-10-D 87220.08 M-1900-65-20i-0-D 97220.17 M-1900-65-20i-0-D-U 97220.14 M-1900-65-20i-2-D 97220.15 M-1900-65-20i-2-D-U 97220.10 M-1900-65-20i-4-D 97220.11 M-1900-65-20i-5-D 97220.13 M-1900-65-20i-7-D 97220.16 M-1900-65-19.5i-10-D 97204.15 M-1900-90-11.5i-0-D 97194.15 M-1900-90-13.5i-0-D 107194.12 M-1900-90-13.5i-10-D 107194.07 M-1900-90-13.5i-2-D 107194.03 M-1900-90-13.5i-4-D 107198.15 M-1900-90-15.5i-0-D 107198.14 M-1900-90-15.5i-2-D 107198.10 M-1900-90-15.5i-4-D 107184.15 M-1900-90-16.5i-0-D 117184.18 M-1900-90-16.5i-0-D-U 117184.14 M-1900-90-16.5i-2-D 117184.17 M-1900-90-16.5i-2-D-U 117184.20 M-1900-90-16.5i-3-D 117184.13 M-1900-90-16.5i-4-D 117184.07 M-1900-90-16.5i-6-D 117200.05 M-1900-90-18i-0-D 117200.01 M-1900-90-18i-2-D 117200.02 M-1900-90-18i-2-D-U 117200.09 M-1900-90-18i-3-D 117200.07 M-1900-90-18i-4-D 117200.07 M-1900-90-18i-4-D-U 117200.10 M-1900-90-18i-5-D 117200.08 M-1900-90-18i-6-D 117199.02 M-1900-90-19.5i-0-D 127199.01 M-1900-90-19.5i-2-D 127208.06 M-1900-105-16i-0-D 127208.01 M-1900-105-16i-2-D 127208.05 M-1900-105-16i-6-D 124168.21.33.00 O-800-360-11i-0-D 564168.21.05.00 O-800-360-11i-0-N 564168.21.33.03 O-800-360-11i-3-D 564168.21.05.03 O-800-360-11i-3-N 564168.21.33.07 O-800-360-11i-7-D 564168.21.05.07 O-800-360-11i-7-N 564168.11.33.00 O-900-360-11i-0-D 564168.11.05.00 O-900-360-11i-0-N 564168.11.33.02 O-900-360-11i-2-D 564168.11.05.02 O-900-360-11i-2-N 564168.11.33.03 O-900-360-11i-3-D 564168.11.05.03 O-900-360-11i-3-N 564168.11.33.06 O-900-360-11i-6-D 564168.11.05.06 O-900-360-11i-6-N 564168.11.33.52 O-900-360-11i+2-D 564168.11.05.52 O-900-360-11i+2-N 564168.11.33.53 O-900-360-11i+3-D 564168.11.05.53 O-900-360-11i+3-N 564168.31.33.03 O-900-360-10i-0<3-D 574168.31.05.03 O-900-360-10i-0<3-N 577270.02 U-800-65-12.5i-0-D 507270.01 U-800-65-12.5i-0-N 507271.02 U-800-65-15.5i-0-D 507271.01 U-800-65-15.5i-0-N 507271.03 U-800-65-15.5i-5-D 507272.02 U-800-65-16.5i-0-D 517272.01 U-800-65-16.5i-0-N 517273.02 U-800-65-18i-0-D 51

7273.01 U-800-65-18i-0-N 517273.03 U-800-65-17.5i-4-D 517275.02 U-800-90-11.5i-0-D 527275.01 U-800-90-11.5i-0-N 527276.02 U-800-90-14i-0-D 527276.01 U-800-90-14i-0-N 527277.02 U-800-90-15i-0-D 537277.01 U-800-90-15i-0-N 537278.02 U-800-90-16i-0-D 537278.01 U-800-90-16i-0-N 537250.02 XM-1900-65-18.5i-0-D 157250.03 XM-1900-65-18.5i-2-D 157250.04 XM-1900-65-18.5i-4-D 157301.02 XM-1900-90-13.5i-0-D 167262.01 XM-1900-90-16i-0-D 177262.02 XM-1900-90-16i-2-D 177262.03 XM-1900-90-16i-4-D 177251.02 XM-1900-90-17.5i-0-D 177251.01 XM-1900-90-17.5i-2-D 177251.05 XM-1900-90-17.5i-2-D-U 177251.03 XM-1900-90-17.5i-4-D 177251.04 XM-1900-90-17.5i-6-D 177282.03 XU-800-65-12.5i-4-D 187282.04 XU-800-65-12.5i-4-N 187263.04 XU-800-65-14.5i-6-D 197263.05 XU-800-65-14.5i-6-N 197263.01 XU-800-65-15i-0-D 197263.02 XU-800-65-15i-0-N 197281.02 XU-800-65-16.5i-0-D 19

Antenna Mounting Hardware2165.10 BRACKET KIT 2 MNTPOINTS 672165.11 BRACKET KIT 3 MNTPOINTS 672187.0000 UPSIDE-DOWN KIT OMNI 672190.10 HOSE CLIPS 2x40-110 672201.10 PANNING WALLBRACKET 2MNTPOINTS 672201.11 PANNING WALLBRACKET 3MNTPOINTS 67

7254.10 TILTBRACKET 2 MNTPOINTS 677254.11 TILTBRACKET 3 MNTPOINTS 67

Tower Top Amplifiers/Power Amplifiers8479.02 APDU without Allgon logo (LPA) 728479.04 APDU without Allgon logo (USA) 729183.01 APDU outdoor 729183.02 APDU outdoor 728484.01 6-port Current Injector 709184.01 1-port, Outdoor 719184.03 1-port, Outdoor 71

9184.04 1-port, Outdoor 719184.05 1-port, Outdoor 719184.06 1-port, Outdoor 719184.07 1-port, Outdoor 719184.08 1-port, Outdoor 719221.01 Current Injector indoor 7/16 719221.02 Current Injector indoor N 719221.03 Current injector 1-port, Indoor 719221.04 Current injector 1-port, Indoor 719254.01 CI 48V/4A - PCN-PCS-GSM 759254.02 CI 48V/4A - PCN-PCS-GSM 759254.03 CI 48V/4A - PCN-PCS-GSM 759254.04 CI 48V/4A - PCN-PCS-GSM 758490.01 CABLE ALARM 708496.01 CABLE OCTOPUS 708496.02 CABLE OCTOPUS 708496.03 CABLE OCTOPUS 708496.04 CABLE OCTOPUS 709173.01 CABLE EARTH STRAP L=400 709174.01 CABLE EARTH STRAP L=150 709174.02 CABLE EARTH STRAP L=400 708473.01 TTA PCS Duplex 718473.02 TTA PCS Duplex 718473.06 TTA PCS Duplex 718474.01 TTA PCS Receive 718474.02 TTA PCS Receive 718474.06 TTA PCS Receive 719256.01 TTPA PCS 1900 759256.02 TTPA PCS 1900 75ALVC =>Allgon Vertical CombinedALX =>Allgon Cross polarizedA =>Allgon log periodicCI =>City M =>MetroO =>OmniU =>UrbanXM =>Cross polarized MetroXU =>Cross polarized Urban

Part Number Product Description Page Part Number Product Description Page

I n d e x P a g e 8 0

Organized by Product Description

Page 75: Catalog, Allgon - Swedcom

Future on Demand.

Brazil

Allgon Telecom LtdaRua Alexandre Dumas 2220 conj. 42Chacara Santo Antonio04717-004 Sao Paulo-SPTel: +55 11 5181 1088

China

Allgon System BeijingRm 1823, Tower 2Bright China Changan BuildingNo. 7, Jianguomennei AvenueDongcheng District 100005 BeijingTel: +86 10 6510 2018Fax: +86 10 6510 2017

Allgon Limited23/F, Tai Yau Building181 Johnston Road,Wanchai, Hong KongTel: +852 2512 6123Fax: +852 2575 4860

Germany

Allgon System Handels GmbHGewerbestrasse 29, 21279 HollenstedtTel: +49 4165 2197 0Fax: +49 4165 2197 [email protected]

Sweden

Allgon System ABAntennvagen 6SE-187 80 TabyTel: +46 540 834 80Fax: +46 540 824 [email protected]

United Kingdom

Allgon Systems UKUnit 2Clayfield CloseMoulton Park Industrial EstateNorthampton NN3 6QFTel: +44 1604 494132Fax: +44 1604 790484

USA

Allgon Telecom Ltd.7317 Jack Newell Blvd. NorthFort Worth, TX 76118Tel: +1 817 595 5999Fax: +1 817 595 [email protected]

www.allgon.comALGPC0026