Engineered Solutions to Maximize Performance & Safety

Authorized Agent and Distributor :

Ari

0857 2904 6754

ari@ptpgs.co.id

Contact Person Head Office :Komplek Lodan Center Blok H-11, Jakarta 14430

Jl. Lodan Raya No. 2, Ancol Pademangan

Tel : +62-21-6900656

Fax : +62-21-6900657

Development, production and global distribution of measuring equipment for:

Gas leak detection, gas concentration and gas leakage amount measurement,

warning of lack of oxygen, toxic gases and risks of explosion

Water leak detection and Pipe and cable location

Gas Water Detection

Gas leak detections outdoors Gas leak detections indoors Gas warning devices Odorisation Landfill and biogas Test gases and testing equipment

Electro-acoustic water leak detection Correlators Noise logger Tracer gas Flow analysis

Pipeline detection Object detection

Products for gas leak detection outdoors

DP-IR (Detector Pac-Infrared)

State-of-the-art

infrared measuring

technology for gas

pipeline testing

applications

VARIOTEC 480 /

460 / 450 / 400

EX

Cost-effective

combination

measuring

devices for gas

supply

Multitec 560

Combined gas warning and

measuring device for

monitoring processes and

personal safety at landfill

sites, sewage treatment

facilities and biogas plants

PORTAFID M3 /

M3K

Flame ionisation

detectors for

inspecting

underground gas

lines

Pipe location

Glass fibre probe systemDetection of non-metal pipes

Combiphon systemAcoustic location of plastic pipes

UT 830UT 830 - Reliablepipe location

UT 9000Reliable pipe location. easy always efficient

Products for electro-acoustic water leak detection

AQUAPHONElectro-acoustic water leak detection: professional flexible intelligent

Aquaphon A 100AQUAPHON A 100 receiver for electro-acoustic water leak detection

AquaTest T10Robust test rod for electro-acoustic water leak detection outdoors

SeCorrPhon AC 06Combined correlatorand electro-acoustic water leak detector

Stethophon 04Compact listening device for water leak detection Wireless headphones with digital radio

Pressure Gauge & Transmitter

Temperature Gauge &

Transmitters

Differential Pressure Gauge &

Transmitters

Pressure & temperature switch

Diaphragm Seal

RTD, Thermocouple, Thermowells

Level Gauge

Accessories

Accessories

Thermowell, valve, shyphone

Differential , Pressure and Temperature

Transmitter

Pressure Gauge WIKA

Model ; 232.50.

with or without liquid filled

Dial size ; 63mm/100mm/160mm

Material ; full ss

Accuracy ; 1.0 % fd

Connection ; Bottom / backWindows ; safety glass

Range ; 1 bar to 1000 bar or eqiv

With capillaryWith cooling

With diaphragm With alarm contact

Pressure Switch

Explosion proof

GAS DETECTOR Portable And FIX system..

Make your gas plant be safety

Model GX-2009 Model GX-8000 M2 Series

Simultaneous and real-time detection

LEL, 02, H2S & CO Large simultaneous display for 4 gases

Water and dust resistant, IP67

Loud alarm buzzer 95dB at 30cm.

Real-time detection of max. 5 ranges

Combustibles 100vol% 100%LEL, O2, H2S & CO

Large simultaneous display with auto back

lighting

3 bright LED alarm windows

Operates independent of a controller

Direct digital readout on backlit LCD

Available for LEL, H2O, CO and O2

4-20mA & digital Modbusoutputs standard

Recargeable Ni-MH battery pack Continuous operation for up to 20 H Built in shock-resistant coating RFI shielded housing Vibration alarm, Auto-calibration

ATEX Exia II CT4 approved Water and dust resistant IP67 Lithium-ion rechargeable battery Compact and light weight Ergonomic design with waist strap for

hands free

Loud alarm buzzer with 95dB

Non-intrusive calibration via magnetic wand

2 fully programmable alarm relays & fail relay

H2 specific LEL version available Infrared combustible version available Patented water repellent sensor coating

RM-5000 Series RM-6000 GH-202F

Compatible with RM-570A/580 series

Bar meter & digital multi-indication

High level of visibility Low power consumption Support RS-485

communication function

RoHS Compliant Global standard

Compact & Light weight Bar meter & Digital Multi-

indication

Simply Fixturable Two Alarm levels, trouble

alarm

Maintenance mode fuction RoHS Compliant Global standard

High visibility level meter and buzzer sound

Automatic balance circuit against background level

Automatic suction Fumigation application

SD-01 FI-21

Explosion proof housing 7 segments LED (4 digits) Signal converter Self diagnosis by

microprocessor

Electrical power saving (Max: 3W)

Capable of measurement for up to 8 kinds of gases

Gas can be selected with key operation Direct digital readout Built-in sampling pump High accurate measurement with CCD and

Fourier analysis

Datalogging stores up to 100 readings Fumigation applications

EAGLE 2 GD-70D

Monitor up tp 6 different autoranging gases PPM / LEL hydrocarbon detection PID (Photo Ionization Detector) low and

high range for VOC detection

IR Sensors available for CO2, % Vol. HC TC (Thermal Conductivity) sensor available

for % Vol. H2 or % Vol. CH4 .Plug and play,

smart toxic sensors

Hundreds of configurations. Multi-lingual (5 languages)

Powerful long-life pump up to 125 range Low flow pump shut off and alarm Methane elimination for environmental use Alkaline 16 hours or Ni-MH 18 hours capability

Common platform (Main / Sensor / Pump) for all detection methods

Universal main unit (All sensor types) Multifunctional sensor unit (New

Intelligent sensor)

No internal tubing (Main unit) / No coil (Pump)

Easy replacement of sensor and pump Large size LCD (Easily viewable) Various communication methods

available (4-20mA, NT and PoE)

Smallest mounting space Simple upgrade from existing units Environmentally friendly

Gasmet DX4040 - Portable ambient air analyzer DX4000 FTIR Gas Analyzer

Measuring principle: Fourier transform infrared, FTIR Performance: Simultaneous analysis of up to 25 gas

compounds (PDA), 50 gas compounds with optional

Calcmet software

Response time, T90: Typically < 120 Operating temperature: Ambient temperature Short

term 0 40 C, Long term 5 30 C, Non-condensing

Power supply: 115 / 230 VAC

Measuring principle : Fourier transform infrared, FTIR

Performance: Simultaneous analysis of up to 50 gas compounds

Response time, T90: Typically < 120 s Operating temperature: Short term 0 -

40C, long term 5 - 30C, non-condensing

Battery functioning time: Approximately 2.5 hour operation time with Bluetooth ON (dependant of ambient temperature).

Zero point calibration: 24 hours Zero point drift: < 2 % of measuring range per zero point calibration

interval

Power supply: 100-115 or 230 V / 50 -60 Hz Power consumption: Average 150 W, maximum 300 W Zero point calibration: 24 hours, calibration with nitrogen Zero point drift: < 2 % of measuring range per zero point

calibration interval

GASMET with FTIR Technology

Up to 50 Gases

Applications Power generation esp. using biomass

and refuse derived fuels

Waste incinerators (both municipal and hazardous)

Refineries (CFC plant, sulfur plant, waste boilers)

Aluminum plants (Perfluorocarbons, HF, SO2 monitoring)

Fertilizer and nitric acid plants ( Nox, Nitrous Oxide and Ammonia monitoring)

Cement plant

Industrial air quality Solvents Halogenated VOCs

Occupational Hygine Hospitals

Container FumigantsHAZMAT and Emergency First Response

Teams

Chemical Warfare Agents (CWA) and Toxic Industrial Chemical

Process and Environment

TW-100 Water Distribution MonitorPG-300 Portable Gas Analyzer (NOx, SO2, CO, CO2, O2, CH4)

Parameters : Turbidity, color, free chlorine, water pressure (standard); pH,

conductivity, water temperature (option)

Turbidity : 0 to 2 FTU, 0 to 4 FTU Color : 0 to 10 CU, 0 to 20 CU Free chlorine : 0 to 2 mg/L Water pressure : 0 to 1 Mpa pH : pH 2 to 12 Conductivity : 0 to 50 mS/m Water temperature : 0 to 50 C Analog output : DC 4-20 mA Automatic cleaning Sample water conditions 0 to 40 C

Repeatability : 0.5% of full scale (NOx:100ppm range / CO: 1000ppm range)

Linearity : 2.0% of full scale Response Time

(T90) : Analyzers except SO2 analyzer:

45 sec. or less (From sample inlet)

Sample Gas Flow Rate : Approx. 0.5L/min. (Approx. 1.0L/min for

CH4 100% range)

Output : DC 4-20 mA (non-insulated) / Ethernet

Power : AC 100V to 240V, 50/60 Hz

OPSA-150 Organic Pollutant MonitorVA-3000/VS-3000 Multi-component Analyzer(CO, CO2, NO, NOx, SO2, CH4, C2H4, N2O, O2 and

others)

Measurement items : UV absorbance, VIS absorbance, Converted COD level,

Converted TURB level

Principle : 2 light path 2 wavelength cell length modulation

Measurement wavelength : UV: 253.7 nm, VIS: 546.1 nm

Range : UV absorbance / VIS absorbance (0 to 0.1 Abs - 0 to 5.0

Abs)

Response time : T 90 within 1 minute (flow rate of 5 L/min)

Ambient conditions : Ambient temperature: 0 to 40C, Ambient humidity: 85% or less

Applications : CEMs Gas AnalyzerRange :

CO : Min 0-200 ppm; Max 0-100% Vol(NDIR methods)

CO2 : Min 0-100 ppm; Max 0-100% Vol(NDIR methods)

SO2 : Min 0-200 ppm; Max 0-100% Vol(NDIR methods)

N2O : Min 0-100 ppm; Max 0-500 ppm(NDIR methods)

O2 : 0-5% Vol (MPA methods)Zero drift : 2.0 full scale/weeksSpan drift : 2.0 full scale/weeksRespons time : T99 within 30 secondsOutput : DC 4-20 mA, 0-1 VEasy to read, full graphic LCDPower supply : 100-120 VAC / 200-240 VAC 50Hz

U-50 MultiparameterWater Quality Checker

ENDA-5000 series(CO, CO2, SO2, O2 & Nox Gas Analyzer)

Multiple sensors allow for the measurement of 11 parameters

simultaneously.

(pH, pH (mV), ORP, DO, COND,

Salinity, TDS, Seawater, Specific

Gravity, Temperature, Turbidity,

Water depth)

pH and ORP electrodes can be replaced individually to reduce

replacement costs.

Tough & powerful design, considering user friendly field

monitoring on site, such as rive,

ground water, drainage water, etc.

bring together feature of function

and performance, which makes

simple operation for everybody.

Application : CEMs Gas AnalyzerRange :

CO : 200-5000 ppm (NDIR Methods)

CO2 : 5-25% Vol (NDIR Methods)

SO2 : CO : 200-5000 ppm (NDIR

Methods)

O2 : 10-25% Vol (Magneto Pneumatic)

Nox : CO : 200-5000 ppm (NDIR

Methods)

Zero drift : 1 full scaleSpan drift : 2.0 full scale/weeksResponse time : 60 secondsOutput : DC 4-20 mA, 0-16 mA, DC 1-5 V

Easy to read, full graphic LCDEasy to operate, touch screen

Process and Environment

Industrial resistivity meter HE-480RAPXX-370 Ambient Air Quality Monitoring(CO, CO2, NO, NO2, Nox, SO2, O3, PM 2.5, PM 10)

Measurement method : Electrode type (2-electrode method)

Perfoemance analysis : pH, DO, ORP, Conductivity, Resistivity,

Residual Chlorine

Range : pH : 0-14; DO : 0-20 mg/L; ORP : 2.000 mV; Cond : 0-500

mS/cm; Resis : 0-100 m-cm

Contact output : 2-4 point alarm, Capacity 240 VAC/3A, 30 VDC/3A

Self check for sensitivity, response speed, standard solution and

electrode error

Transmission out : 4-20 mA/DC max 900 ohm

APNA. Application : NO2, NO and

NOX in ambient air.

Principle : Cross flow

modulation type, reduced

pressure chemiluminescence

(CLD).

Standard ranges: 0-

0.1/0.2/0.5/1.0 ppm

APSA. Application : SO2 in ambient air.

Principle : UV fluorescence

(UVF).

Standard ranges: 0-

0.05/0.1/0.2/0.5 ppm

APDA. Application : PM10.

Principle : Beta Ray

attenuation.

Range : 0-

1000/5000g/m3 Easy-to-read, full graphic

LCD

Easy-to-operate touch panels (touch screen),

User friendly, Interactive

type operation

Shows the alarm by color

APMA. Application : CO in ambient air.

Principle : Cross flow

modulation, non-dispersive

infrared (NDIR) absorption

technology.

Ranges: 0-10/20/50/100 ppm;

0-5/10/20/50 ppm

APOA. Application : O3 in ambient air.

Principle : Non dispersive ultra-

violet-absorption method

(NDUV).

Standard ranges: 0-

0.1/0.2/0.5/1.0 ppm

CODA-500 Industrial Process Water Analyzer

performance : COD Monitor Methods : ACID or Alkaline Range : 0 to

20/30/40/50/100/200/500/1000/2000

mg/L

Repeatability : 1% FS Zero and span Stability : 1% FS Measuring up to 2 point Automatic cleaning Signal output : 4-20 mA, 0-16 mA Dc

(up to 6 point)

Sample conditions : 2 to 40C

Gloss Checker

IG-410 IG-320 IG-331

For ultra high gloss measurement

Dual range gloss meter

Flexible use with its remote probe

Measuring angle 60

High precision measurement

Internal memory Average mode Measuring angle

60 Range 0-100

High efficiency measurement

Measuring angles 20and 60

Flexible use with its remote probe

Measurement area : 3 x 6mm oval Dual range 0-100 and 0-1000 Light source : LED Detector : SPD (Silicon

photodiode)

Measuring range(resolution)

range1 : 0.0 - 100.0 0.1range2 : 0 - 1000 (1)

Measurement area : 12x6mm oval Light Source : LED (wavelength:880

nm)

Detector : SPD (Silicone Photodiode) \Display range : 0mm-199.9mm

(resolution:0.1)

Range 0-100 Cost Effective Measuring area : 60 measurement

3*6mm oval

20 measurement 3*4mm oval Light source : LED (wavelength: 890 nm) Detector : SPD (silicone photodiode) Display range : 0-199 (resolution: 1)

Scientific

Water Quality Analyzer(pH, ORP, Conductivity, ION, DO, Resistivity, Salinity, TDS)

Benchtop Meter LAQUAact - Portable Meter LAQUAtwin - Compact Meter

Intuitive control with the large capacitance

touch panel.

360rotating free arm also has a full range of

vertical movement

One hand operationShock-resistantVisible LCD in dark

places

Waterproof and dustproof

Extended operation

pen sized, simple design.

Calibrate and measure at the touch of a button the Smiley face will tell

you when the result can

be read.

Customizable auto hold function for calibration and measurement

Digital memory: Maximum 2,000 sets of measurement data can be recorded

Multi-language support (Japanese, English, Chinese, Korean)

The most frequently used basic functions of "Calibration", "Measurement" and

"Data Management" can be accessed

quickly.

Easy to carryChemical resistant (Resistant to

alcohol, weak acid, bases and oil)

The built-in data memory can store 1000 items

Select from seven water quality parameters such as pH , conductivity,

various ions (Na+, K+, NO3-, Ca2+) and

salinity that suits your purpose

LAQUAtwin is fully waterproof and dustproof (IP67).

Carry case comes standard for handy portability.

Nano Partica SZ-100 Dynamic Light Scattering

Laser scattering particle size Distribution Analyzer LA 960 Series

Camsizer Dynamic Image Analysis System

Particle size, zeta potential, molecular weight, and second virial coefficient all in

one instrument

Wide range of particle sizes and concentrations from 0.1 ppm to 40 wt%

Particle diameter: 0.3nm-8.0m

The dynamic wide measurement range 0.01- 5000 microns (up to 3000

microns for wet method)

Measurement Method : Mie Scattering Theory

Measurement Range : 0.01 m to 5000 m

Size Range: 30 microns to 30 mm in one measurement with no hardware

changes required; 1000:1 dynamic

range.

Size Range: 30 m - 30mm Measurement Time: 0.5 to 3 minutes Measurements: 60 images /second with

more than 780,000 pixels.

Sample Requirement: 25g to 2.5kg per measurement,

EMIA V2 SeriesCarbon Sulfur Analyzer

SLFA Series Sulfur in Oil Analyzer

ICP-OES JY 2000-2

"Auto cleaner" mechanism

reduced

maintenance

works (Standard

for 920V, Option

for 320V2)

Principle: NDIR/ Non Dispersive Infrared Gas Anaryzer High-frequency furnace

method in oxygen flow

Range: Carbon: 0-6,0%, Sulfur: 0-1,0% Sample weight: 1,0g standard,

Sensitivity: 0,01ppm

Wide measurement range (0-9.999%), Range: 0-9,999%,

Detection Limit: 5 ppm or less

Principle: X-ray fluorescent analysis Sample: Sulfur content in petroleum

products, such as heavy oil, naphtha,

crude oil, etc

Optical design maintains the elegance and simplicity necessary to provide

maximum light throughput and still

provide excellent performance in

resolution

Typical detection limit for Pb is 5 ppb on a radial view plasma. Radial view

minimizes interferences.

Continuous wavelength coverage from 160 to 800nm as a standard with

optional extension to 120nm for UV

analysis of the halogen elements or the

use of alternative wavelengths

2020 ComboPROPortable Photoionization Detector

Micro GC FusionGas Analyzer

FEATURES AT A GLANCE

Intrinsically safeExceptionally simple calibration and operationTotal volatile organic compound (TVOC) measurement

Large, simultaneous information displayRugged design

APPLICATION

Chemical incident responseSite characterization and remediationBenzene exposure monitoringIndoor air quality

FEATURES

Rapid analysis, 13 minutes Fast temperature ramping extends analytical

capability

MEMS TCD provides 10 times more sensitive analysis than traditional TCD

Integrated touch panel display provides intuitive Instrument control and status display

Intelligent web-based GUI and Wi-Fi allows operation from any web-enabled computing device

Optional integrated sample conditioner maintains sample temperature at 100C, and reduces input pressure from up to 1000 psi.

HAPSITE* ERChemical Identification System

3000 Micro GCGas Analyzer

APPLICATIONS

Environmental assessment Chemical monitoring Emergency response

FEATURES AT A GLANCE

Fast, confirmatory results in the field directly comparable to laboratory GC/MS data

Universal interface allows for accessory expansion without a hardware change to

HAPSITE

Simple operation for even basic skill levels with minimal training

Visual confirmation of correct probe placement for optimum sample collection

Built-in GPS records exact sampling location for legally defensible data.

FEATURES AT A GLANCE

Modular design delivers maximum application flexibility and minimizes

method development leadtime

The universal thermal condductivitydetector, 10 times more sensitive than

traditional TCDs, allows you to detect

common gas components in the low

ppm range

Built-in LAN connectivity allow remote access to the instrument and its data, so

you can conduct your analysis wherever

LAN connectivity allows.

CMS5000 Monitoring SystemUnattended, On-site VOC Monitoring

Explorer Portable Gas ChromatographGas Chromatography for Specialty Applications

FEATURES

Continuous, unattended monitoring using on-board default methods

Low maintenance Robust, reliable design minimizes

consumable use

Fast, simple start-up with minimal training required

CMS IQ software Communication integrationWireless capability Can be used for air or water monitoring

TYPICAL APPLICATIONS

Drinking water distribution systemsWater source and water distribution

protection

Wastewater discharge compliance Groundwater remediation Air quality monitoring

FEATURES

Portable photoionization detection (PID) Optional electron capture detection (ECD) 8 hour battery life Backlit LCD screen Syringe injection port Refillable carrier gas cylinder

TYPICAL APPLICATIONS

Ethylene monitoring for fruit and vegetable ripening

Process system monitoring Environmental surveys Spill characterization Superfund cleanup Underground storage tanks (UST) Soil gases/Soil Vapor Extraction (SVE) systems

Product Features

Protection against chemical splash and particlesFilm laminate technology provides an outstanding barrier against a wide range of chemicals

Particle protection holds out > 99% of fibres greater than 1 micron

Strong triple stitched seams help protect against tearingHood designed for respirator use and freedom of movementEN 1073-2 approved for radioactive dust protectionSealed poly-bags for low contamination risk

Product Features

One-at-a-time dispensingAbsorbs 18% more water than other private label wipersAbsorbs water 24% faster than other private label wipersLow lint and low extractablesAlso available in 2 and 3-ply for increased absorbencyWon't scratch delicate surfaces when wetGentle texture

KIMTECH SCIENCE* KIMWIPES* Delicate Task Wipers

WYPALL* X60 Jumbo Roll Wipers

Product Features

Strong wiper construction ensures longer lasting performance, maintaining strength wet or dry.

Single-use, highly absorbent wiper minimises therisk of cross-contamination

Extremely soft and gentle in texture, especially when wet, making wiper suitable as a personal wash cloth

Versatile and economical, delivering a balance between performance and value

Very flexible, enabling you to clean in the tightest of cornersEfficient and hygienic dispensing systems allow easy access to wipers for

Immediate use, while ensuring that individual wipers are hygienically

dispensed.

Product Features

Material : Spunlace (long continous fibres like spaghetti noodle) non woven fabricSafety Standard : comply with HACCP standardRegular Duty : 12 packs x 20 sheets, 60 x 30 cmHeavy Duty : 12 x 20 sheets , 60 x 40 cmRegular Duty : Blue , Green, Red, YellowHeavy Duty : Blue & Green

WYPALL* Microfibre Cloths

JAKCSON SAFETY* G40 Latex Coated Gloves

KLEENGUARD* G10 Arctic Blue Nitrile Gloves

JAKCSON SAFETY* G80 NITRILE* Chemical Resistant Gloves

Technical Information :

Material : Polycarbonate Lens, PVC Frame, NeopreneHeadband

Standard : ANSI Z87.1+ (Impact Resistant)Case content : 6 pairsLens option : Clear Anti FogIndirect Vented GogglesClear Anti FogIntended for general eye protection from chemical (liquid) splash, impact, particles.z

JACKSON SAFETY* V80 MONOGOGGLE* XTR

Product Features :

Material : 100% polypropyleneColor : WhiteSheet Size : 40 x 50 cmCase content : 1 pack x 100 sheetsIts a sawdust/rags replacement to absorb oil leak & spill only (repel water)

Application : hydraulic machine, production area, spraying area, oil/ink tray/warehouse, offshore oil drilling, water treatment area

KLEENGUARD* A40 Liquid & Particle ProtectionCoveralls - Hooded

WYPALL* Oil Sorbent Pad

Product Features

Peformance : Minimum sample hold-up, High purity, Convenient, and Sterile

(All polypropylene can be autoclaved,

but Acrylic can not be autoclaved)

Specifications : Mixed Cellulose Esters (MCE), Cellulose Acetate,

PTFE hydrophilic, PTFE hydrophobic,

NYLON, and PES

Product Features

Application : Standard membranes for many laboratoryapplications Including filter sterilizing biological fluids, microbiology,

contamination analysis and air Monitoring

Peformance : Strong, Thermostable, Thin membrane with high

porosity, chemically and biologically clean

Specifications for Membrane Filters : Mixed Cellulose Esters(MCE),

Cellulose Acetate, Pure Nitrocellulose,

Hydrophobic PTFE, Hydrophilic PTFE, and

Polycarbonate

Membrane Filters Disposable Syringe Filter Units

Applications :

Clarify and remove precipitates Preparation for qualitative analysisGravimetric analysisEnvironmental monitoring ChromatographyElectrophoresis and blottingSeparation of heavily loaded solutes

Product Features

Peformance : Various types of pH test papers are available to cover the wide range

Specifications Type :pH Test Paper-RollsUniversal Test PaperWR Test PaperBCG Test PaperIon Test PaperspH Test Paper-BookletspH Test Paper-Strips

Analytical Filter Papers Test Papers (Litmus / pH Paper)

Product Features

Applications :Standard filter papers for a wide variety of applications

Highest particle retention of industrial filter papersIncrased surface area for higher flow rates than standard filters

For special applications requiring high wet strengthUse for Quantitative filtration analysis

Specifications Type :Specifications Type :Fine Particle Filter PapersCraped Filter PapersWet Strength Filter Papers High Purity Filter PapersHigh Viscosity Fluid Filter PapersApplication Guide for Industrial Filter Papers Industrial Filter PadsNA Standard Filter PadsNA Long-Life Filter Pads Application Guide for Industrial Filter Pads

Industrial Filter Papers &

PADSProduct Features

Polystyrene dishes suitable for culturing microorganisms on 47 mm diameter

membrane filters

Available with or without pad : 47 mm absorbent cellulose pad

(0,85 +/- 0.17 mm thick,

absorbs 1.8-2.2 mL Liquid)

Manufacture's certification of compliance available request

Petri Dishes

"EKO Instruments unique Solar Monitoring Station (SMS) is your primary reference to collect high quality

solar irradiance data on site.

This Innovative and turn-key system provides all fundamental solar radiation and meteorological parameters

needed to contribute to a successful analysis and assesment of the solar resource and PV potential. The

SMS can be freely

configured to meet all client- and market-specific demands.

Measure all parameters. Depending on its composition, the Solar Monitoring Station combines all functions

to measure radiation components (Global, Direct and Diffuse) and other meteorological parameters (Wind

speed, Wind

direction, Relative humidity, Atmospheric pressure, Temperature and Cloud cover)."

Sun Tracker STR-21G /STR-22G

From sun rise to sun set EKOs compact SunTracker guarantees

accurate sun tracking and

pointing

of the attached solar sensors.

With the built-in GPS receiver the sun tracker automatically find the solar position and will

accurately synchronize the time stamp of the SMS.

Pyrheliometer/ DNI Sensor Total Sky-imager

Turn-key

One provider one solution. The SMS combines

prequalified compatible components,

which have been optimized to create full flexibility.

The station is pre-composed, but can be freely

configured

to meet all client- and market-specific demands.

Easy to use

Research experts dont require specific expertise for installing and operating the SMS. The system data

can be easily retrieved and is compatible with most

common software programs.

High quality

Maximize the measurement accuracy. State of the

art sensors enable end users to achieve their

primary research goals.

Global Solar Monitoring Station

FEATURES AND BENEFITS :

Simultaneously measure size-segregated mass fraction concentrations corresponding to PM1,

PM2.5, Respirable, PM10 and Total PM size

fractions

STEL alarm setpointAutomatic zeroing (with optionalzero module) minimizes the effect

of zero drift

Perform in-line gravimetric analysis for custom reference calibrations

Manual and programmable data logging functions

Aerosol concentration range 0.001 to 150 mg/m3

FEATURES AND BENEFITS :

Energy-efficient, long lasting external pump for continuous, unattended, 24/7, outdoor monitoring

Applications

Measure aerosol concentrations corresponding to PM1, PM2.5, Respirable, and PM10 or size

fractions with a variety of inlet conditioners

Aerosol concentration range 0.001 to 400 mg/m3

STEL alarm setpointCloud Data Management System for efficient remote

monitoring

Heated Inlet Sample Conditioner to reduce humidity effects

DUSTTRAK II

AEROSOL

MONITOR 8530EP

DUSTTRAK DRX

AEROSOL MONITOR

8533

DUSTTRAK DRX AEROSOL

MONITOR 8534

DUSTTRAK II AEROSOL

MONITOR 8530

FEATURES AND BENEFITS :

Simultaneously measure size-segregated mass fraction concentrations corresponding to PM1, PM2.5,

Respirable, PM10 and Total PM size fractions

Lightweight and portableManual and programmable data logging functions

Single point data logging capabilityHandheld unitAerosol concentration range 0.001 to 150 mg/m3

FEATURES AND BENEFITS :

Measure aerosol concentrations corresponding to PM1, PM2.5, Respirable, PM10 or size fractions

STEL alarm setpointAutomatic zeroing (with optional zero module) minimizes the effect

of zero drift

Perform in-line gravimetric analysis for custom reference calibrations

Manual and programmable data logging functionsAerosol concentration range 0.001 to 400 mg/m3

FEATURES AND BENEFITS :

Measure aerosol concentrations corresponding to PM1, PM2.5, Respirable, or PM10 size fractions

Lightweight and portableManual and programmable data logging functionsSingle

point data logging capability

Handheld unitAerosol concentration range 0.001 to 150 mg/m3

FEATURES AND BENEFITS :

Energy-efficient, long lasting external pump for continuous, unattended,

24/7, outdoor monitoring

applications

Simultaneously measure size-segregated mass fraction concentrations

corresponding to PM1, PM2.5, Respirable, PM10 and

Total PM size fractions

DUSTTRAK II AEROSOL

MONITOR 8532

DUSTTRAK DRX AEROSOL

MONITOR 8533EP