Catalog - 010期正版香港挂牌 ... · Manual Hoists Geared Trolleies and ... Phone...

Catalog No.901CCatalog No.901C

Best Industrial Supply Co., Ltd

Phone +86-532-8896-8160

Fax +86-532-88968162

Email [email protected]

www.chinabestools.com

Workholding Tools Shop Supplies Machinery www.chinabestools.com

Catalog

Welcome to BESTOOL !

We will try to be best supplier from China inMeasuring Tools, Cutting Tools, Machinery andAccessories evaluated by customers.

Why should you choose BESTOOL?

Quality: Top quality, try to be error freeDelivery: Speed up our delivery and ship in timeCost: Competitive prices with marketService: Quick response to any questions and provide value added services

C1-C2C3-C4C5C5-C6C6-C7C8C8C8C9-C14C14C15C16C17C18-C21C22-C24C25C26-C28C29-C39C39C40-C41C41-C43C43C44C45-C46C46-C47C48-C49C50C50-C51C51C51C52C53C54-C55C55C56-C57C58C59-C61C62-C68C69-C70C71-C77C78

C79-C86C86-C87C87-C89C90-C93

INDEXNC Tool Holder with shank to DIN69880American Quick Change Tool Post and HoldersKDK Style Quick Change Tool Posts & Holders40-Position Quick Change Tool Posts & HoldersItalian Quick Change Tool Posts & SetsKnurling ToolsCollet StopsCollet Wrenchs5C, R8, 3C, 3AT ColletsCollet StandsTG Series Single Angle ColletsDA Series Double Angle ColletsEOC ColletsER Collets, ER Collet Chucks & SetsDIN 6343 Clamping ColletsTool Holder BushingsEnd Mill HoldersCNC End Mill HoldersRetention KnobsMilling Machine ArborsAdaptors, Sockets, SleevesReversing Type Tapping HeadsExpanding Arbors, MandrelsBoring Heads and ShankLathe CentersDrill ChucksDrill Chuck ArborsCollet FixtureEnd Mill and Drill SharpenerH&V Tool Locking FixturesPunch FormerIndexing FixturesRotary TablesMilling & Drilling and Sliding TablesBox Parallels and Angle PlatesMagnetic ChucksLathe Chucks and Back PlatesClamping Tools and KitsToggle ClampsVisesJacks and Stops

Deburring ToolsSteel StampsPunchesPliers, Wrenches, Drivers and Sockets

INDEXC94C95C96C97C98C99C100C101-C102C102C103C104-C105C106-C110C110-C111C112C112C113C114C115C116,C121C117C118-C121C122

C123C124C124-C125C125C126C127-C128C129-C130C130-C132C132C132-C135C134-C135C135C136C137C138C139C140-C142C143C143

Pin Vise, Doweling Jig, Hole Saw ArborsScrew Extractors, Hacksaw Blades & Magnetic Mirror & PenBattery and ChargersPneumatic ToolsSpray GunsManifoldsAir CompressorsMagnifier LampsWorking LightsSpotlightsRoller and Ball StandsHand Pallet TrucksLift TablesPlatform TrucksToolholder CartCarts, Tool Chest and CabinetsManual HoistsGeared Trolleies and Beam ClampsPullersHoists and FrameHydraulic JacksLifter and Carriers

Arbor Presses, Punches and NotchersSheet Metal CutterCompact BendersRollsPower Feed and Part WashersShears, Brakes and SlittersGrindersSandersLog SplittersSawsPlanner, Jointer and Wood LatheDust CollectorsDovetail JigsDrill PressesMetal Cutting SawsLathesMilling & Drilling MachinesSurface GrinderShock Proof Machine Mounts

Administrator

附注

Phone +86-532-8896-8160 www.chinabestools.com Fax +86-532-8896-8162 C79

DeDeDeDeDebbbbburururururring Bladesring Bladesring Bladesring Bladesring Blades

The mostly used blade for innerand outer Deburring

HSS blade for brass and cast iron,can be used on both directions

HSS blade for deburring thin gaugematerials inner and outer.

Heavy-duty HSS.Deburrs materials with spiral chips

HSS for materials with powdery chips.Rotates clockwise & counterclockwise

HSS for materials with spiral chips.Simultaneously deburrs the inside andoutside of holes up to 6mm/.24” thick

HSS Blades for deburring holesas small as 7/64” Diameter

HSS Blades for deburring smallholes in brass and cast

ironFor straight edge on all materials

380-0012

380-0014

380-0015

380-0026

380-0033

380-0032

380-0035

B10

B20

B30

E100

E200

E300

E101

E350

E102

380-0028

380-0027

C12

C20

C30

D40

D30

N80

Blade Order No.Specification Picture

Applications Materials

Stra

ight

Edg

e

Hol

e Ed

ge

Hol

e B

ack-

Edg

e

Hol

e In

ner

Surfa

ce

Flat

Sur

face

Stee

l

Alum

iniu

m

Cop

per

Bra

ss

Cas

t Iro

n

Stai

nles

s St

eel

Plas

tics

N80K

Cro

ss -H

ole

Both

Edg

e

Countersink for hole-edges with up to12mm/0.47” Diameter, M7



ø 5.6x30mm, triangular HSS scraper forprecision work, M5

ø 6.5x33mm, triangular HSS scraperfor precision work, M5

Double-edged, round HSS blace formassive deburring tasks on materialswith spiral chips. (Used in pairs)

380-0061

Standard blade for keyways

L3

L4

L5

L6

For sheet metal. Range 1-8 mm. Hand-Guard available upon request.Used for deburring small ridges indifficult to reach places. Range of 0-2.5 mm.To relieve corners of narrow slots from3.5 mm. Double ended blade L7 forcutting in two directions also available.

Effective corner relief. Wide range ofapplications.

Shee

t

380-0045

380-0046

380-0049

D50

D66

D25

D20ø .6x20mm, triangular HSS scraperfor precision work, M5

ø 4.0x25mm, triangular HSS scraperfor precision work, M5

ø 3.2x50mm,D1 Bladeholderwith UN handle

ø 3.2x48mm,D1 Bladeholderwith UN handle

380-0062

380-0070

380-0071

380-0079

380-0072

380-0073

380-0047

380-0075

380-0076

380-0077

380-0078

Pol

yace

tal

& P

olia

m

Excellent Good

Slo

t K

eyw

ay

Inne

r Stra

ight

Phone +86-532-8896-8160 www.chinabestools.com Fax +86-532-8896-8162C80

380-0011

380-0019

380-0022

380-0025

Holder B

Holder C

Holder D

Holder E

Order No.PictureSpecification

Holds all B blades, M5 thread

Holds D20,D25,D30,D40 blades

Holds all E blades.

Holder LDBlades are held in a 3mm square hole andtightened with 4mm set screw. Holds L,L4,L5 & L6 blades.

Holder K

Has an hexagonal cross section andM3 internal threads at both ends. HoldsN80K Blade. Marked point shouldalways point upwards during operation.

Made to hold the Mini Scraper andInternal Scraper. An M3 setscrew isholding the Blades. Allen key included.

Has an hexagonal cross section to preventrotating inside Handle. External M7 thread toaccept the countersinks:C12,C20,C30

Holder F

Holder D1

Holder BH

Holder EH

Holder F7

Holder F5Has an hexagonal cross section to preventrotating inside Handle. External M5 thread toaccept the Adapter:E,B,C & L.

Adapter E

Adapter B

Adapter D

Adapter L

Holder DH

Holds all F blades, M7 thread

Holder BECA double headed telescoping bladeholder, External M5 thread on one end,and M7 thread on the other end.

Holds all E blades.

Holds all B blades

Has an hexagonal cross section to preventrotating inside Handle. Inner M5 thread toaccept D20,D25,D30,D40 blades.

Inner M5 thread to holds all B blades

380-0031

Holder

380-0013

380-0017

380-0018

380-0020

380-0021

380-0023

380-0024

380-0034

380-0042

380-0037

380-0038

380-0063

380-0064

Inner M5 thread to holds all E blades

Inner M5 thread to holds Holds D20,D25,D30 & D40 blades

Inner M5 thread to holds Holds L3, L4,L5 & L6 blades

Made to hold the Mini scraper and D50,D66internal scraper.An M3 setscrew is holdingthe Blades. Allen key included.

DeDeDeDeDebbbbburururururring Holderring Holderring Holderring Holderring Holders & s & s & s & s & AdaAdaAdaAdaAdapterpterpterpterptersssss


Handle UN

Handle NE

Handle UNI

Handle RB

Handle EO


380-0010

Classic universal handle. Accepts allShaviv blade holders. To store spareblades inside handle, simply unscrew theback cap.

A unique Handle which can hold thetotal range of Blade holders:hexagonal cross section.

A unique handle with large storagespace for spare blades. Better grip.Saftey button for quick change ofblades.

Hexagonal aluminium painted Handle.Accept all E blades all E blades

Hexagonal plastic handle. Holds all“E” (ø 3.2 mm) Blades.

Non-telescopic handle, excellent for heavy-duty deburring tasks. All E-series blades fitdirectly into handle. To store spare bladesinside handle, simply unscrew the back cap

Handle 1 380-0009

380-0016

Handle NB

Handle SGErgonomically held handle with softgrip. Accepts both heavy and light duty“B” & “E” blades due to 2 holes.

ø 3.2 mmø 2.6 mm

Handle

Plastic Replacement HandleFit all E blades

380-0043

380-0044

380-0090

380-0092Handle B

380-0091

380-0093

Rapid deburring tool Handle. Accept100 E blade. Which is replacable.

DeDeDeDeDebbbbburururururring Handlesring Handlesring Handlesring Handlesring Handles



380-0052

Includes: E100 Blade mounted in an 8 mm Hexagonalpainted Aluminium Handle.The blade is not replaceable. Handy pocket clip.

EDGE OFF

PLASTIC EDGE OFFIncludes: E100 Blade, Plastic Handle.Holds all “E” (ø 3.2 mm) Blades.The Blade is replaceable.

PUSH SLEEVE

Includes: E100 Blade, 12 mm Hexagonal paintedAluminium Handle. Holds all “E” (ø 3.2 mm)Blades. To replace blades, push black sleeveback into handle and pull blade out.

PUSH BUTTON

380-0054

380-0039

NB BURR 1, 3, 5

Includes: NB-handle and “E” series Blade.

380-0074

NE BURR 1, 3, 5Blades can be stored in plastic handle.Accepts“E” series Blade.Blades can be easily changedby depressing locking button.

Includes: SG handle, E100 and B10 Blades.Ergonomically held handle.Accepts both heavy and light duty “E” & “B” Bladesdue to 2 holes.

SOFT GRIP ø 3.2 mmø 2.6 mm

380-0050

380-0051380-0096380-0097

380-0053

Rapid deburring tool Handle. Accept 100 Eblade. Which is replacable.

1: E100.3: E100, E200, E350.5: E100, E200, E350, E101, E102

1: E100.3: E100, E200, E350.5: E100, E200, E350, E101, E102

380-0095380-0055

DeDeDeDeDebbbbburururururring ring ring ring ring TTTTToolsoolsoolsoolsools


B UN BURR

SCRAPERDesigned for hight quality finishing & scraping.Includes: UNI-handle, telescoping blade holder,D20blade & key

SLOT EDGE CLEANERThe original deburring set with the non-telescopicblade holder. Great for heavy duty deburring of holesedges. Features a strong, built-in steel blade holderthat holds the blade close to the handle. Takes all E-sries blade

380-0029

MINI-SCRAPER

INTERNAL SCRAPER

Includes: UN-handle, D1-holder, Triangular Mini-Scraper D50.Hollow ground.

Includes: UN-handle, D1-holder, InternalScraper D66. For deburring of cross holes.

Includes: Un-handle, B-holder, one B10 Blade.


380-0057

380-0058

380-0059

380-0065

380-0066

380-0067

380-0068

380-0069

380-0080

380-0081

Includes: UNI-handle, DH-holder,D25blade & key

Includes: UNI-handle, DH-holder, D30blade & key

Includes: UNI-handle, tDH-holder, D40blade & key

Includes: Un-handle, E-holder, one E100 bladeIncludes: Un-handle, E-holder, one E200 bladeIncludes: Un-handle, E-holder, one E300 blade

Includes: Uni-handle, B-holder, one B10 Blade.

E UN BURR

B UNI BURR

E UNI BURR

380-0098Includes: Un-handle, B-holder, one B20 Blade.

380-0099380-0100

Includes: Uni-handle, B-holder, one B20 Blade. 380-0105

380-0106Includes: Uni-handle, E-holder, one E100 bladeIncludes: Uni-handle, E-holder, one E200 bladeIncludes: Uni-handle, E-holder, one E300 blade 380-0107




“V” CUTIncludes: UNI-handle, LD Blade-holder, L3 Blade.For sheet metal. Range 1-8 mm. Hand-Guard availableupon request.

MINI-CUTIncludes: UNI-handle, LD Blade-holder, L4 Blade.Used for deburring small ridges in difficult to reachplaces. Range of 0-2.5 mm.

SLOT CLEANER

Includes: UNI-handle, LD Blade-holder, L5 Blade.To relieve corners of narrow slots from 3.5 mm.Double ended blade L7 for cutting in two directionsalso available.

CORNER CLEANER

Includes: UNI-handle, LD blade-holder, L6 blade.Effective corner relief. Wide range of applications.

KEYWAY BURRIncludes: UNI-handle, K blade-holder, N80K blade.Effectively removes burrs from internaland external keyways. Range 2.4-11mm.

DOUBLE-BURR

Includes: Double burr, hand guard,2 x N80 Blades. Simultaneouslyremoves burrs from both sides of sheet metal.

380-0060

380-0089

380-0088

380-0087

380-0086

380-0085

COUNTERSINK380-0082

380-0083

380-0084

Can be locked in any position. Most useful forchamfering deep holes.Includes: Uni-handle, F7-holder, 12 mm Countersink.

Includes: Uni-handle, F7-holder, 30 mmCountersink.

Includes: Uni-handle, F7-holder, 20 mmCountersink.



Universal Deburring Set

Includes:UNI handle,M7 holder,Countersink: C12, C20, C30,Wrench

Order No. 380-0272

Includes:UNI handle,Hex inner thread Holder,Scrapers: D20, D25, D30, D40,D Wrench

Order No. 380-0273

Includes:UNI handle,M5 holder,Adapter D, Adapter L, Scraper D30,Cleaner: L3, L4, L5, L6,Hex Wrench,D Wrench

Order No. 380-0274

Universal Extra Set 1

Includes:UNI handle,M5 holder, Adapter B, Adapter E,Baldes: B10, B20, B30, E100, E200, E300,Wrench

Order No. 380-0271

Each set features the UNI handle,engineeredfor unparalleled comfort, safety and highperformance. This tools is extremely power-ful yet lightweight, Comes with the specialasapter for an extra- close grip.

Countersink Set

Features triangular blades with 3 cuttingedges and a telescopic blade holder that letsyou reach hard to access areas. Providesmaximum grip comfort when used with UNIhandle. Suggestion: Use the key supplied tosafely releade and remove blades.

Scraper Set

Edge Cleaner and Scraper Set

Each set with 3 powerful countersink tools,m o s t u s e f u l f o r c h a m f e r i n g a n dcountersinking.

Includes:UNI handle, M5 & M7 holder,Adapter L, Adapter E,Cleaners: L3, L4, L5, L6,Baldes: E100, E200,Countersink: C12, C20,Hex Wrench, D Wrench

Order No. 380-0275

Includes:UNI handle,M5 & M7 holder,Adapter: B, D, E, L,Cleaners: L3, L4, L5, L6,Baldes: B10, B20, E100, E200,Countersink: C12, C20,Scraper: D30,Hex Wrench,D Wrench

Order No. 380-0276

The complete uni kit for professionalmachinists.

The most complete uni kit for professionalmachinists. With extra scraper.

Features blades with Adapters and a tele-scopic blade holder that lets you reach hardto access areas. Provides maximum gripcomfort when used with UNI handle.Suggestion: Use the key supplied to safelyreleade and remove blades.


Universal Extra Set 2

18 Pc. Deburring Tool Set

Order No. 380-0056

Set include:one double burrone zip/burr handleone “B” holderone B-10 bladeone B-20 bladeone “E” holderone E-100 bladeone E-200 bladeone E-300 bladeone keyway blade for 1/8-1/4" wide slots

High Speed Steel Blades, Plastic Case


Set Includes:Flat diamond coated file, triangu-lar scraper, flat Scraper, roundscraper, swivel blade tool, rota-tional deburing tool with minimumhole diameter 0.08”.

6 Pcs/setOrder No.380-0160

one zip/burr “K” holderone zip/burr “c” holderone c-12 1/2”countersinkone c-20 3/4" countersinktwo zip/burr “D” holdersone D-50 HSS mini scraperone D-66 HSS internal scraper


DeDeDeDeDebbbbburururururring ring ring ring ring TTTTTools/Steel Stampsools/Steel Stampsools/Steel Stampsools/Steel Stampsools/Steel Stamps

9 Pcs/Set includes:one plastic handleone each of E100, E200, E300,B10, B20, B30 bladesone each of E holder and B holder

Order No. 380-0007


Holder B

Holder E

E100

E200

E300

B20

B30

B10

Blades can be stored in plastic handle. Blades can be easily changed by pressing collar of holder. Packed in fitted case.

4 Pcs/Set “B” includes:one plastic handle,one B holderone each of B10, B20 blades

Order No. 380-0003


B20B10

3 Pc. Rapid Deburring Tool SetRapid deburring tool with bladeE100 which is not replaceable.Includes: 3 Pcs 380-0052

Order No. 380-0352

Scraper SetIncludes:Uni-handle,D1 Blade-holder + D50 Scraper,D1 Blade-holder + D66 Scraper,Wrench

Order No. 380-0103

Includes:EO handle + E100EO handle + E102EO handle + E200EO handle + E300

Order No. 380-0104

Universal SetThe Plastic EDGE OFFSet

5 Pcs/Set “E” includes:one plastic handle,one E holderone each of E100, E200,E300 blades

Order No. 380-0006

5 Pc. Deburring Tool SetE100

E200E300

Includes:SG handle.B10 Blade (10 Pcs)E100 Blade (10 Pcs)Order No. 380-0101

Soft Grip SetIncludes:SG handle.B10 Blade (1 Pcs)E100 Blade (20 Pcs)Order No. 380-0102E100 B10

Size1/16”1/8”3/16”1/4”1/16”1/8”3/16”1/4”1/16”1/8”3/16”1/4”

Order No.835-1000835-1005835-1010835-1015835-1055835-1060835-1065835-1070835-2000835-2001835-2002835-2003

Alloy Steel, Heat Treatment 50-55 HRC

SpecificationA to Z 27PcsA to Z 27PcsA to Z 27PcsA to Z 27Pcs0 to 8 9Pcs0 to 8 9Pcs0 to 8 9Pcs0 to 8 9PcsA to Z & 0-8 36PcsA to Z & 0-8 36PcsA to Z & 0-8 36PcsA to Z & 0-8 36Pcs

Steel Stamping Letter & Number Sets

Size

1mm

1.5mm

2mm

3mm

4mm

5mm

SpecificationA-Z 27Pcs/set0-8 9Pcs/setA-Z & 0-8 36PcsA-Z 27Pcs/set0-8 9Pcs/setA-Z & 0-8 36PcsA-Z 27Pcs/set0-8 9Pcs/setA-Z & 0-8 36PcsA-Z 27Pcs/set0-8 9Pcs/setA-Z & 0-8 36PcsA-Z 27Pcs/set0-8 9Pcs/setA-Z & 0-8 36PcsA-Z 27Pcs/set0-8 9Pcs/setA-Z & 0-8 36Pcs

order No.835-3001835-3002835-3005835-3011835-3012835-3015835-3021835-3022835-3025835-3031835-3032835-3035835-3041835-3042835-3045835-3051835-3052835-3055

DescriptionHandle + 1/16” Letter Punches(835-2000 )Handle + 1/8” Letter Punches( 835-2001)Handle + 3/16” Letter Punches(835-2002)Handle + 1/4” Letter Punches( 835-2003)

Order No.830-8350830-8351830-8352830-8353

Permanently identify your belongings. Imprints wood & metal. Steel handle: 6 x 5/8”, handle only

Order No.830-8300. Complete set includes both letters

and numbers plus a 6” handle.

38 Pc. Automatic Steel Stamp Sets

Size1/16”3/32”1/8”3/16”1/4”3/8”

Order No.829-1800829-1801829-1802829-1803829-1804829-1805

A fast easy solution for multi-character marking. Now in a simple stamp you can indent a series of letters and numbers in a product or nameplate. These kits are made of special tool steel. Each character is hardened and tempered to HRC 58-62. Each kit is packed in a case and contains: type holder with a complete

selection of letters, numbers,dash, slash amok, period, comma, ampersand and spacers. Holder capacity: 8pcs or 12pcs.

Special Tool Steel for Hand or Machine Use

HolderCapacity8Pcs8Pcs8Pcs8Pcs8Pcs8Pcs

Order No.829-1700829-1701829-1702829-1703829-1704829-1705

Holder Capacity12Pcs12Pcs12Pcs12Pcs12Pcs12Pcs

112 Pc. Industrial Steel Stamp Set

Sets Includes:A A A B B C C D D EE E E F F G G H H II I J J K K L L L MM N N N O O O P P QR R R S S S T T U UU V W W X X Y Z & // - - . . . 1 1 1 11 2 2 2 2 3 3 3 4 44 4 5 5 5 6 6 6 7 77 8 8 8 9 9 9 0 0 0


Specification1/16, 3/32, 1/8, 5/32”3/16, 7/32, 1/4, 5/16”1/16, 3/32, 1/8, 5/32,3/16, 7/32, 1/4, 5/16”

Piece4Pcs4Pcs8Pcs

Order No.830-0260830-0262830-0264

Specification1.6, 2.4, 3.2, 4 mm4.8, 5.6, 6.4, 8.0mm1.6, 2.4, 3.2, 4 mm4.8, 5.6, 6.4, 8.0mm

Piece4Pcs4Pcs8Pcs

Order No.830-0290830-0292830-0294

Drive Pin Punch Sets

Individual Letters & Numbers

CharacterABCDEFGHIJKL

1/8”Order No.830-1001830-1002830-1003830-1004830-1005830-1006830-1007830-1008830-1009830-1010830-1011830-1012

1/4”Order No.830-1101830-1102830-1103830-1104830-1105830-1106830-1107830-1108830-1109830-1110830-1111830-1112

CharacterMNOPQRSTUVWX

1/8”Order No.830-1013830-1014830-1015830-1016830-1017830-1018830-1019830-1020830-1021830-1022830-1023830-1024

1/4”Order No.830-1113830-1114830-1115830-1116830-1117830-1118830-1119830-1120830-1121830-1122830-1123830-1124

CharacterYZ0123456789

1/8”Order No.830-1025830-1026830-1500830-1501830-1502830-1503830-1504830-1505830-1506830-1507830-1508830-1509

1/4”Order No.830-1125830-1126830-1600830-1601830-1602830-1603830-1604830-1605830-1606830-1607830-1608830-1609

Individual Steel Type SetsCharacterHeight1/8”1/8”1/4”1/4”

Description

Letter A-Z Number 0-9 Letter A-Z Number 0-9

Order No.830-1027830-1510830-1131830-1610

Steel SpacersSteel Type Holders

Size1/8”1/8”1/4”1/4”

Capability812812

Order No.830-0900830-0905830-0910830-0915

Stamp a series of letters or figures in a producing nameplate or metal part, with uniform legibility, in one stroke! Hand mobile type holders include threaded pin, Allen wrench and screw. Blanks must be used for spacing – or filling unused capacity of type holder.

Weight0.26 Ibs0.46 Ibs

Centers top of 3/16”-3/4” hole. Perfect hole center alignment assured. Precision ground and spring loaded. All parts made from steel & hardened. Replaces different size transfer punches.

Moveable components are made from tool steel and hardened. The point is easily removed for sharpening. The pressure of marking is controlled by ratting the dunned cap.

Screw the cap down for heavy indentations and screw the cap upward for lighter markings. Automatic heavy duty center punch. Handle Length 6”, Handle Diameter 5/8”.

PuncPuncPuncPuncPunchesheshesheshes

Steel Type & Holders

Automatic Center Punches

Order No.830-3001830-3002

DescriptionSteel HandleCopper Handle

Universal Transfer Punches & Aligners

2 in 1 Punch Scriber

Order No. 830-3003

Attachable carbide scriber head can be stored in the hollow handle for safe carrying. The punch scriber consisted of one male handle

with punch head and key ring, and one female handle with female thread used to tighten carbide scriber and male handle.

Body SizeW x H x L1/8” x 1/4” x 1”1/8” x 1/4” x 1”1/8” x 1/4” x 1”1/8” x 1/4” x 1”

Size1/8”1/4”

Order No.830-1135830-1145

Specification3/16” Dia. Punch 3-1/8” L for 1/4”-3/4” hole3/16” Dia. Punch 4-1/8” L for 1/4”-1-1/16”hole

Order No.830-0150830-0180

Center Punches

Order No.830-0211830-0212830-0213830-0214830-0215

Order No.830-0201830-0202830-0203830-0204830-0205

Point Dia.1/16”5/64”3/32”9/64”5/32”

Point Dia.1.6mm2.0mm2.4mm3.6mm4.0mm

Size1/16”, 5/64”, 3/32”, 9/64”, 5/32”1/16”, 5/64”, 3/32”

Order No.830-0200830-0210

Size1.6, 2.0, 2.4, 3.6, 4.0mm1.6,2.0, 2.4mm

Order No.830-0220830-0230

Piece53

Metric Sets

Piece53

Inch Sets

Inch Individuals Metric Individuals


SetsPlastic StandOrder No.830-4125830-4126830-4128

830-4160

Steel StandOrder No.830-4025830-4026830-4028830-4033830-4060

Description25Pcs/set 1mm to 13mm by 0.5mm26Pcs/set letters A-Z28Pcs/set 3/32” to 1/2” by 64ths plus 17/32”33Pcs/set 1/2” to 1” by 64ths60Pcs/set numbers 1 to 60

Individual PunchesSize3/32”7/64”1/8”9/64”5/32”11/64”3/16”13/64”7/32”15/64”

Order No.830-0106830-0107830-0108830-0109830-0110830-0111830-0112830-0113830-0114830-0115

Size1/4”17/64”9/32”19/64”5/16”21/64”11/32”23/64”3/8”25/64”

Order No.830-0116830-0117830-0118830-0119830-0120830-0121830-0122830-0123830-0124830-0125

Size13/32”27/64”7/16”29/64”15/32”31/64”1/2”33/64”17/32”

Order No.830-0126830-0127830-0128830-0129830-0130830-0131830-0132830-0133830-0134

Point Dia.1/8”3/16”1/4”5/16”3/8”

Order No.830-0242830-0244830-0246830-0248830-0250

Heat treated and tempered for long life. Diameters 0.0025 undersize to facilitate use. Black oxide finish.

Point Dia.3.2mm4.8mm6.4mm8.0mm9.5mm

Order No.830-0272830-0274830-0276830-0278830-0280


Size1/8”, 3/16”, 1/4”, 5/16”, 3/8”

Order No.830-0240

Piece5

Length8"

Size3.2, 4.8, 6.4,8.0, 9.5mm

Order No.830-0270

Piece5

Length200mm

Metric Sets

Inch Sets

Inch Individuals Metric Individuals

830-4028830-4033

Extra Long Drive Pin Punches

Transfer Punches

Solid Brass Grommet Kits Mandrels and anvils are coded with lines for specifying their own individual size. Black finished Mandrel, Anvil and Hole Cutters. Golden bright finished Grommets.

Size1/4"3/81/2

Order No.830-0400830-0410830-0420

Size1/4"3/81/2

Grommet24pcs24pcs24pcs

Order No.830-0500830-0510830-0520

Descriptionfor 830-0400for 830-0410for 830-0420

Grommet Kits Grommet Refills

Each size kit includes:1 Hole cutter1 Wooden block1 Mandrel1 Anvil48 grommets for 1/4”, 24 grommets for 3/8”& 1/2”

3/16”1/45/163/87/191/29/165/811/163/413/167/815/1611-1/161-1/81-3/161-1/41-5/161-3/81-7/161-1/21-9/16

Order No.830-8001830-8002830-8003830-8004830-8005830-8007830-8008830-8009830-8010830-8011830-8012830-8013830-8014830-8015830-8017830-8018830-8019830-8020830-8021830-8022830-8023830-8024830-8025

HoleSize

Dmm

Lmm

1010.512.51517192123242627293133404244464850525455

95100106106106116116116118118118120120120163165168168175185200208208

Type

AAAAAAAAAAAAAABBBBBBBBB

Hollow PunchesThese tools are used to punch holes in materials such as leather, rubber, cork,plastic, balsa wood, and thin soft metals such as brass and lead. Widely used forpunching holes as well as cutting gaskets and washers, production work, and otherclose tolerance applications.

Order No.HoleSize

Dmm

Lmm Type

1-5/8”1-11/161-3/41-13/161-7/81-15/1622-1/82-1/42-3/82-1/22-5/82-3/42-7/833-1/83-1/43-3/83-1/23-5/83-3/43-7/84

830-8026830-8027830-8028830-8029830-8030830-8031830-8032830-8033830-8034830-8035830-8036830-8037830-8038830-8039830-8040830-8041830-8042830-8043830-8044830-8045830-8046830-8047830-8048

57586163646668707578818488929699102105108112115118122

215215215218220230230230230230230230232235235235235240240250250255255

BBBBBBBBBBBBBBBBBBBBBBB

More accurate than transfer punches. Thefastest and most precise method of trans-ferring threaded holes to mating parts.Great for tool and die work and in lay out.Set consists of 1 handle and 6 screws.

7 Pc. Transfer Screw Sets

NCOrder No.830-3014830-3015830-3016830-3018830-3020830-3021830-3022830-3023830-3024830-3025830-3026830-3027830-3028830-3029830-3030830-3031830-3032

NFOrder No.830-3114830-3115830-3116830-3118830-3120830-3121830-3122830-3123830-3124830-3125830-3126830-3127830-3128830-3129830-3130830-3131830-3132

Size4-405-406-328-3210-243/16”-2412-241/4”-205/16”-183/8”-167/16”-141/2”-139/16”-125/8”-113/4”-117/8”-91”-8


Compact set of 3 takes the pace of numerous individual solid punches. Each punch expands within its range to pick up the true center of holes from

1/4" to 11/16" diameter. By turning the knurled head,

the punch body expands to the perfect fit in the bottom of the hole. A light hammer stroke on the top

of the center pin provides the desired center mark.

Fast, easy way to locate opposite centers. Whenholes do not extend through material (such as holesfor dowel pins, perforating punches, etc.) Spellmacoblind-hole spotters get the job done simply. Correctsize spotter can be used in threaded, drilled orreamed holes.Packaged six of one size in plastic tube.

Size1/8”9/64”5/32”11/64”3/16”13/64”7/32”15/64”1/4”17/64”9/32”19/64”5/16”21/64”11/32”23/64”3/8”25/64”

Order No.830-5008830-5009830-5010830-5011830-5012830-5013830-5014830-5015830-5016830-5017830-5018830-5019830-5020830-5021830-5022830-5023830-5024830-5025

Size13/32”27/64”7/16”29/64”15/32”31/64”1/2”33/64”17/32”35/64”9/16”37/64”19/32”39/64”5/8”41/64”21/32’43/64”

Order No.830-5026830-5027830-5028830-5029830-5030830-5031830-5032830-5033830-5034830-5035830-5036830-5037830-5038830-5039830-5040830-5041830-5042830-5043

Size11/16”45/64”23/32”47/64”3/4”49/64”25/32”51/64”13/16”53/64”27/32”55/64”7/8”57/64”29/64”59/64”15/16”61/64”

Order No.830-5044830-5045830-5046830-5047830-5048830-5049830-5050830-5051830-5052830-5053830-5054830-5055830-5056830-5057830-5058830-5059830-5060830-5061

Size31/32”63/64”1”3#6#7#8#10#16#20#21#25#29#30#FIPQ

Order No.830-5062830-5063830-5064830-5103830-5106830-5107830-5108830-5110830-5116830-5120830-5121830-5125830-5129830-5130830-5206830-5209830-5216830-5217

Order No. 830-8016

This set combines all the most used pin punches, all are forge hardened, heat-treated tool steel. 16 Pcs/set, includes: 5 pieces 8” extra long drive pin punches. 8 pieces 4” long drive pin punches. 5 pieces round shank center punches. 3 pieces 5/32” taper pin punches. 1 handle for pin punches. 1 piece 6”/150mm ruler. 1 piece 4” divider. Order No. 830-0024

Punch quick, accurate washers and gaskets on the job. Use on rubber, leather, copper, soft brass, and other materials. 15 Pcs/set, includes:

1-1/2, 1-3/8, 1-1/4, 1-1/8, 1, 7/8, 3/4, 5/8, 1/2, 7/16, 3/8, 5/16, and 1/4”, Handle, Plastic case. Order No. 830-2115

15 Pc. Gasket Punch Set

Blind Hole Spotters & Sets

Size6pcs each of 1/8-21/32” by 32nds6pcs each of 11/16-1” by 32nds

Order No.830-5300830-5305

Piece108 66

Sets

3 Pc. Expandable Pin Punch SetRang 1/4 to 11/16” (6-17mm)

Size1/4-5/16”(6-8mm)5/16-7/16”(8-11mm)7/16-11/16”(11-17mm)

SetOrder No.

830-0029

Individuals

IndividualOrder No. 830-0025 830-0026 830-0027

No. of Piece

3Pcs/set

Comes in a vinyl roll-up pouch. 16 Pcs/set, includes:

4 starting punches: 9-3/4”, 7-3/4”, 5-3/4”, 5-13/16”. 5 cold chisels: 8x5/8, 7x3/4, 6-3/4x5/8, 5-3/4x1/2, 5-3/4x3/8”. 1 center punch. 3 pin punches. 1 prick punch. 1 diamond point punch.

13Pc. Gunsmith Punch set

Order No. 830-0013

Set include:8pc Brass punches, one of each: 1/8,9/64, 5/32,3/16, 7/32, 1/4, 9/32, 5/162pc Steel pin punches:1/16 & 3/322pc Hard plastic punches:15/64 & 3/81pc Brass head hammer

All included in a blow molded case.

Order No. 830-8006


6 Pc. Hollow Punch SetThe fast, easy way to punch accurate holes in gasket material, light gauge sheetmetal, vinyl, leather, and more. High carbon construction with precision ground flutesand cutting edges, Easy to grip knurled shank.6 Pcs/set, includes 3/16, 1/4, 5/16, 3/8, 7/16, 1/2 punches

4” OAL. Black ni t ratefinished. Chrome alloy steel,hardened with knurled body.Includes center punch, prickpunch and pin punch inpouch.

Orser No. 830-0003

3 PC. Punch Set

24 Pc. Pin Punch Set

16 Pc. Punch & Chisel Set


PilerPilerPilerPilerPilers/Snipss/Snipss/Snipss/Snipss/Snips

Slip Joint Pliers

with Wire Cutter & GripsSize4”56810

Order No.802-0204802-0205802-0206802-0208802-0210802-02033Pcs/set,6,8 &10"

Diagonal Pliers (Polished)Size4”5675.56.57.5

Order No.802-0304*802-0305802-0306802-0307802-0355802-0365802-0375 * with Coiled Spring

Long Nose Pliers, American type, PolishedSize5”685.56.5

Order No.802-0405802-0406802-0408802-0455802-0465

with Side Cutter

Straight Jaws Locking Plierswith Wire CutterSize

4”5678910

Order No.802-0504802-0505802-0506802-0507802-0508802-0509802-0510802-05033Pcs/set,5,7 &10"

Long Nose Locking Plierswith Wire cutter

Size4”5689

Order No.802-0604802-0605802-0606802-0608802-0609

Linemen's PliersSize6”78

Plier sets

3 Piece Set:American type:Long Nose,Diagonal & Bent nose

3 Piece Set:American type:6" LongNose, 6"Diagonal & 7"Linesman

Order No. 802-0903

Order No. 802-09234 Piece Set:one each 6" Linemen, Diagonal, LongNose, Slipjoin

Order No. 802-0914

Mini Plier set

Order No.802-0616802-0617802-0618

Special Aviation Snips

German Type Aviation Snips

Aviation Snips

Left

Right

Straight

Short Cutter Type

Long Reach Type

Size10”1010

Order No.802-0157802-0158802-0159

TypeRightStraightLeft

Size10”1010

Order No.802-0160802-0161802-0162


Normal Type

Heavy Duty Type

Size9”

Order No.802-0163

TypeStraight

Size12”

Order No.802-0164

TypeStraight

Size10”1010

Order No.802-0151802-0152802-0153


Size10”1010

Order No.802-0154802-0155802-0156


Normal Type

Heavy Duty Type

Bolt Cutters American StandardSize12”141824303642

Order No.802-0112802-0114802-0118802-0124802-0130802-0136802-0142

Suitable for medium tensile and soft bolts, rods, rivets,bars and chains, etc.

Alloy Steel Blade, Steel Handle


Hacksaw Frames

SpecificationBasic Model, Fits both 10" and 12" blades BT10512" High Tension BT304Tubular frame fits both 10" or 12" blades BT319

Order No.810-5001810-5002810-5003

Order No. 839-0092

Order No. 839-0090

Order No. 839-0093

Order No. 839-0091

Heavy-duty zinc-alloy knife with multilevel locking pushbutton is special for industrial production.

Heavy-duty zinc-alloy knife, multilevel locking andmulti-pushbuttons is special for industrialproduction.

Order No. 839-0099

100pcs/box

Pipe & Pipe & Pipe & Pipe & Pipe & TTTTTubing ubing ubing ubing ubing TTTTToolsoolsoolsoolsools

Order No. 839-0022

Order No. 839-0028

Order No. 839-0005

Order No. 839-0060

Adjustable tubing cutter from 3-22mm outside diameter. Ideal for use with any soft, thin wall

metal tubing such as copper, brass, aluminum or magnesium. Cast Aluminum Frame, Alloy steel

cutting wheel

Pipe and Tubing ToolsPipe and Tubing Tools

PVC Pipe Cutter

Industrial grade aluminum die cast body. Cust up to 1-3/8” PVC pipe. Blade is heat treated, polished and chrome plated. Easy handling rachet adjusting.

7 Pc. Tubing And Flaring Kit

Tubing Cutter Cuts metal tubes from 3-28mm outside diameter. Ideal for use with any soft, thin wall metal tubing

such as copper, brass,aluminum or mangesium.

1 Adjustable tubing cutter 1/4 to 1-1/4” outside diameter. 2Pcs flaring tools,3/16 to 3/8”. 4Pcs tube benders 1/4,5/16,3/8,7/16".

Replace Blade for PVC pipe cutter(839-0005)

Order No. 839-0006

Large easy-to-spin adjusting nut allows fast setting to pipe size Jaws are made of hardened alloy steel

Size8”1014182436

Order No.800-0152800-0154800-0156800-0157800-0158800-0159800-01602Pcs 24” &36”

Aluminum Pipe Wrenches

Ideal for overhead work Lightweight is able to preform H/D tasks Hook and heel jaw are of strong alloy steel

and hardened

Size10”1418243648

Order No.800-0172800-0174800-0175800-0176800-0177800-0178800-0170800-0150

3Pcs:14,18,24"4Pcs:8'', 10'',14'' and 18''

Alloy Steel

Alloy Steel Blade

Triplet Tubing Bender

1/4,5/16,3/8,6mm,8mm. One tool bends three sizes of tubing in

annealed copper, brass, steel, aluminum, stainless steel and other metals. 8” long. Bender has calibrated makings.

Order No. 830-2000

Steel Pipe Wrenches

Cast Aluminum Frame, Alloy steel cutting wheel Includes a retractable steel reamer.

Retractable Utility Knife

ReplacementBlade (0.5mm)

Black Rubber Mallets

Weight (Ibs.)16 oz.32 oz.

Order No.810-6002810-6004

Bead Blow Hammers

Specifications1-1/2" Face, 8oz./0.5lbs1.0lbs1-3/4"Face, 1-1/2 lbs2" Face, 2 lbs2-1/4" Face, 2-1/2 lbs2-1/2" Face, 3 lbs3-1/2" Face, 11 lbs4.0lbs

Order No.810-6010810-6011810-6012810-6014810-6016810-6017810-6018810-6019

4pcs/set1-1/2,1-3/4,2 and 2-1/2"Order No. 810-6020

Hammers are ideal for an unlimited variety of industrial and construction operationsincluding manfacturing, fabrication, assembly, installation and repair


Screwdriver Sets

4 in 1 Magnetic Shaft Screwdriver, 2 Phillips & 2Slotted Steel Bits6 in 1 screwdriver ,chrome plated holder6pcs Jewelers./watchmaker,chrome plated22 Piece CrV, 9 Slotted,5 Phillips Screwdrivers, 5Torx Drivers, Scratch Awl,Tack Puller & Slotted Screwdriver w/ Screw Holder22 Piece CrV, neon handle 9 Slotted,5 Phillips Screwdrivers, 5Torx Drivers,Scratch Awl, Tack Puller & Slotted Screwdriver w/ Screw Holder26 Pcs,screwdrive & bit set, 1pcs 3way ratcheting revesible screwdriver,4pcsslotte bits,3pcs phillips bits,3pcs star bits, 1pcs bit adaptor,14pcs 1/4"sockets6 Piece, CrV 2pcs Phillips&4pcs Slotted , with hanging storage rack8 Piece, Black Handle, 1/4x1-1/2",1/4x4",3/16x3",5/16x6",3/8x8",#1x3",#2x4",#2x1-1/2" Chrome Plated Alloy Steel Blade8 Piece, Color Coded Neon Handle, 1/4x1-1/2",1/4x4",3/16x3",5/16x6",3/8x8",#1x3",#2x4",#2x1-1/2" Chrome Plated Alloy Steel Blade

Order No.803-0001 Order No.803-0006

Order No.803-0016

Order No.803-0060

Order No.803-0081

Order No.803-0001803-0006803-0016803-0022

803-0023

803-0026

803-0060803-0080

803-0081

Specification

KnifKnifKnifKnifKnife/Scre/Scre/Scre/Scre/Screeeeewwwwwdridridridridrivvvvver/Hacer/Hacer/Hacer/Hacer/Hacksaksaksaksaksaw Fw Fw Fw Fw Frrrrrames/Wames/Wames/Wames/Wames/Wrrrrrencencencencenchesheshesheshes

Order No.803-0080

7 Piece Nut Drivers Set

Order No. 803-9007

7 most popular nut driver sizes: 3/16,1/4,5/16,11/32,3/8,7/16,1/2"

Individuals

Sets

Descriptions3/8x7/16”,1/2x9/16”,5/8x11/16”1/4x5/16”,3/8x7/16”,1/2x9/16”,9/16x5/8”,11/16x13/16”,3/4x7/8”6x8,7x9,10x11,12x14,13x15,17x19mm

No.ofPiece36

6

Order No.800-0970800-0971

800-0972

Size3/8”7/16”1/2”9/16”5/8”11/16”3/4”13/16”7/8“15/16”1”1-1/16”1-1/8”1-1/4”

Order No.800-0951800-0952800-0953800-0954800-0955800-0956800-0957800-0958800-0959800-0960800-0961800-0962800-0963800-0964

Double Open Wrenches

Sets

Descriptions 6”, 8”, 10”, 12”, 15” 6”, 8”, 10”, 12”

No.ofPiece54

ChromeOrder No.800-0080800-0082

Individuals

Size6”8”10”12”15”18”24”

ChromeOrder No.800-0083800-0084800-0085800-0086800-0087800-0088800-0089

Adjustable Wrenches

BlackOrder No.800-0090800-0092

BlackOrder No.800-0093800-0094800-0095800-0096800-0097800-0098800-0099

Descriptions1/4x5/16”,3/8x7/16”,1/2x9/16”,9/16x5/8”,11/16”x13/16”,3/4x7/8”6x7,8x9,10x11,12x13,14x15,16x17mm6x7,8x9,10x11,12x13,14x15,16x17,18x19,20x22mm

Piece6Pcs

6Pcs

8Pcs

Order No.800-0977

800-0978

800-0979

Double Offset Ring Spanner Sets

Ratchet Box-End Wrench Set5 Piece 12 Point Fractional Set

Range: 1/4"-11/16"Set Include 1 Each:1/4x5/16,3/8x7/16,1/2x9/16,5/8x3/4,11/16x7/8"

Made of sturdy,light-weight chrome plated tool Requires only a 20° arc for

continuous ratcheting

Order No. 800-0305

Combination Wrench Sets

Descriptions3/8,7/16,1/2,9/16,5/8,11/16,3/4,13/16,7/8,15/16,1”3/8,7/16,1/2,9/16,5/8,11/16,3/4,13/16,7/8,15/16,1,1-1/16,1-1/8,1-1/4”1-3/8”,1-1/2”,1-5/8”,1-3/4”,1-7/8”,2”1-5/16”,1-3/8”,1-7/16”,1-1/2”,1-5/8”,1-11/16”,1-3/4”,1-13/16”1-1/16,1-3/8,1-1/2,1-5/8,1-3/4,1-7/8,2”1/4” to 3/4”3/8 to 5/8”1/4” to 1-1/4”1/4” to 1-1/4”1/4” to 1-1/2”7,8,9,10,11,12,13,14,17,19,22mm6mm to 23mm6mm to 32mm

No.ofPiece1114

610

795141620111420

Order No.800-0914800-0915

800-0917800-0918

800-0065800-0066800-0068800-0100800-0125800-0110800-0916800-0105800-0120


Order No. 318-0006

Durable wooden body holds two square honesand provides a guide for perfect edges. Aftera few light.Short strikes your jointer or planerwill be up and running.180 and 400 grit.

A "must" for fast, accurate lay-out of angles for stair stringers,roof framing and other bevel cut.Clamp to framing square for re-petitive layout such as stairs andrafters.

Order No. 830-3047

Size(mm)13151719222324273032

StandardOrder No.801-0113801-0115801-0117801-0119801-0122801-0123801-0124801-0127801-0130801-0132

Point6666666666

Size(in.)1/26/195/811/163/413/167/815/1611-1/61-1/81-1/4

StandardOrder No.801-0158801-0159801-0160801-0162801-0163

801-0164801-0165801-0166801-0167801-0168801-0170

Point666666666

DeepOrder No.801-0308801-0309801-0310801-0311801-0312801-0313801-0314801-0315801-0316

Inch

Metric

10 to 27mm, 10" Ratchet and hinge handle, 5" Extension, 10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,27mm

7/16 to 1-1/4", 10" Ratchet, flex Handle, 5" Extension, 7/16,1/2,9/16,5/8,11/16,3/4,13/16,7/8,15/16,1,1-1/16,1-1/8,1-1/4

16 Piece Set-6 Point

Drive(in.)1/43/83/81/2

Order No.801-9004801-9002*801-9006801-9008

OverallLength6”4-1/288

Drive(in.)1/43/83/81/2

Order No.801-9014801-9012*801-9016801-9018

OverallLength6”51010

Round head Flex head

* Stubby

For repair of damaged door lock apertures. Suitable for flush fitting or

recessed lock holes.

Order No. 830-3045

Size(in.)3/87/161/29/165/811/163/413/167/8

StandardOrder No.801-0204801-0206801-0208801-0209801-0210801-0211801-0212801-0213801-0214

Point666666666

Size(mm)789101112131415161719

StandardOrder No.801-0007801-0008801-0009801-0010801-0011801-0012801-0013801-0014801-0015801-0016801-0017801-0019

Point666666666666

Standard

DriDriDriDriDrivvvvver Socer Socer Socer Socer Sockkkkketsetsetsetsets

Size(in.)3/87/161/29/165/811/163/413/167/8

Point666666666

DeepOrder No.801-0256801-0257801-0258801-0259801-0260801-0261801-0262801-0263801-0264

9-19mm, CrV, one each: 8" Ratchet, 3/8" Drive,3" Extension Bar, STD&Deep10,11,12,13,14,15,17,19, extra STD 9"

3/8"-7/8", CrV,one each: 8" Ratchet, 3/8" Drive,3" Extension Bar, STD & Deep3/8,7/16,1/2,9/16,5/8,11/16,3/4,13/16, extra STD 7/8"

Size(mm)789101112131415161719

Point666666666666

DeepOrder No.801-0037801-0038801-0039801-0040801-0041801-0042801-0043

801-0045

801-0017801-0049

3/8" Drive Sockets

Deep

Deep

1/2" Drive Sockets

Descriptions Order No.

801-0079

801-0089

19Piece Set-6Point

Metric

Inch

Descriptions Order No.801-0376

801-0386

Ratchet Handles

Stair Set Gages

Door Lock Hole Reforming Tool

Knife Hone and Holder

Remove frozen or rusted nuts easilywithout damaging the bolt threads.Use the 3-3/4” splinter on nuts from 1/8” to 5/8” and the 4-3/4” splitter on nutsfrom 3/8” to 1”

Order No. 318-0005

A slight hammer tap could give you perfect cor-ners every time. Perfect for hinge plates.5/8” working depth3/8” cutting edge

Order No. 830-0000

Corner Chisel

2 Piece Nut Splitter Set

Standard


DriDriDriDriDrivvvvver Socer Socer Socer Socer Sockkkkkets/Jigsets/Jigsets/Jigsets/Jigsets/Jigs

Order No. 830-4000

This tool is an attachment for woodworking machine, It is well designedfor drilling, it could be adjusted heightbased on the height of work piece.

For removing or inserting bushings andbearings. You get 4-3/4”, 5-3/4” and 7”drivers with lock nuts and 16adapters ranging in size from 7/16” to1-3/8” O.D. and 3/8” to 1-1/4” L.D.Fitted storage case.

Order No. 209-9020

Order No. 830-3104

4 Pieces Set, includes:1 each size of0-1mm, .8-1.5mm, 1.3-3.1mm, 3-4.8mm

Pin Vise Set

Used for laying out and scribing large circles. Includes 2 trammel heads,

2 small points(6”/150mm). heads will accommodate beams

from 3/4” to 1-1/2” in width.Order No. 830-3048

Order No. 830-3008

One Step Universal Doweling Jig

3 in 1 Doweling Jig

Order No. 830-3007

Makes T and L joints, makes edge to edgejoints for 1/4" ,5/16" and 3/8" dowels.

For 1/4" ,5/16" and 3/8" dowels. this jigdrills holes at same time in bothworkpieces with accurate alignment ofmatching holes.

Automatic self-centering. Clamp onto workpieces for precise right angle drilling. Drill Sizes: 1/4” 5/16”, 3/8”, 7/16”and 1/2”. Hole sizes are permanently cast and will

no wear out. Designed to accommodate drilling for

dowel pins requiring exact alignment.

Order No. 830-3000

Bushing & Bearing Drive Set

Trammel Head Set

Doweling Jig

Doweling Jig

Handled Doweling Jigs

DescriptionAdapter for Arbors 402-0102 to 402-0105SpringHexagonal WrenchExtension Shank, 5-1/2"(140mm)Extension Shank, 10"(250mm)Extension Shank, 12"(300mm)Extension Shank, 18"(450mm)1/4" HSS Pilot Drill, 75mm Length1/4" HSS Pilot Drill, 104mm Length, Round Shank1/4" HSS Pilot Drill, 104mm Length, 1 Flat Shank1/4" HSS Pilot Drill, 104mm Length, 3 Flat Shank

Order No.402-0171402-0174402-0177402-0180402-0183402-0186402-0189402-0194402-0196402-0198402-0199

Shank Dia.1/4Round3/8Hex7/16Hex7/16Hex7/16Hex3/8Hex7/16Hex5/8Hex7/16HexSDS plusSDS plus7/16 Hex3/8 Hex7/16 Hex1/41/4

Chuck Size1/43/81/21/21/23/81/23/41/2SDSSDS1/23/81/23 Flats3 Flats

Thread1/2-20UNF1/2-20UNF1/2-20UNF5/8-18UNF5/8-18UNF5/8-18UNF5/8-18UNF5/8-18UNF1/2-20UNF1/2-20UNF5/8-18UNF5/8-18UNF5/8-18UNF5/8-18UNF1/2-20UNF5/8-18UNF

Fits to Hole Saws9/16-1-3/169/16-1-3/169/16-1-3/161-1/4-81-1/4-81-1/4-81-1/4-81-1/4-89/16-1-3/169/16-1-3/161-1/4-81-1/4-81-1/4-81-1/4-89/16-1-3/161-1/4-8

Order No.402-0102402-0105402-0108402-0111402-0114402-0117402-0120402-0123402-0126402-0129402-0132402-0135402-0138402-0142402-0146402-0150

Accessories

Hole Saw Arbors

402-0171 402-0174

402-0180

402-0194

402-0177

402-0196

402-0198

402-0199

Arbors

A complete set of pullers for light duty pulls, easily handles bushings, seals, sleeves,bearings, bronze or oilite bushings, dents and pressed in bolts.Set includes: 2 large jaws, 2 small jaws, 2 jaw pins, slide hammer (2lbs.), jaw holder,grease retainer adapter, bearing hook, body dent adapter, 1/4stud adapter, taperedscrew and carrying case.

Order No. 830-3050

14 Pc. Slide Hammer and Puller Set

0126 0129 0132 0135 0138 0142 0146 0150

0102 0105 0108 0111 0114 0117 0120 0123


The puller will not tilt bearings and damage race, re-moves all sleeve type bearings betweeen 1/2”and1-1/2”(12mm-38mm) inside diameter quickly andeasily. Use this compact puller on flywheel pilotbearings, pump bearings, autos, generator/starterbearings, trucks, and tractors. Also useful on motor-cycles and bicycle.

Order No. 830-2018

3 Jaw Pilot Bearing Puller

HacHacHacHacHacksaksaksaksaksaw Blades/Maw Blades/Maw Blades/Maw Blades/Maw Blades/Magnetic Mirgnetic Mirgnetic Mirgnetic Mirgnetic Mirrrrrror & Por & Por & Por & Por & Penenenenen

No.1#2#3#4#5#6#7#8#9#10#11#

Size Drillto Use5/64”7/64”5/32”1/4”17/64”13/32”17/32”13/16”1-1/16”1-5/16”1-17/32”

Carbon SteelOrder No.312-8901312-8902312-8903312-8904312-8905312-8906312-8907312-8908312-8909312-8910312-8911312-8900

Alloy SteelOrder No.312-8921312-8922312-8923312-8924312-8925312-8926312-8927312-8928312-8929312-8930312-8931312-8920

For removing broken screws,bolts, studs, and pipes

Screw Extractors & SetsSpiral Flute

Screw and Bolt Size3/32— 5/32"5/32— 7/32"7/32— 9/32"9/32— 3/8"3/8— 5/8"5/8-7/8"7/8— 1-1/8"1-1/8— 1-3/8"1-3/8— 2"2-1/8— 2-1/2"2-1/2— 3"

5pcs/set (#1-5) in Plastic case.

Length10"10"10"12"12"12"12"

Width1/2"1/2"1/2"1/2"1/2"1/2"1/2"

Teeth perInch18243214182432

Thickness.025".025".025".025".025".025".025"

Alloy SteelOrder No.402-8568402-8572402-8576402-8525402-8529402-8533402-8537

M2 HSSOrder No.402-7568402-7572402-7576402-7625402-7629402-7633402-7637

High Speed Hand Hacksaw Blades

High Speed Power Hacksaw BladesM2 HSS

Length12"12"14"14"14"14"17"17"17"17"18"18"18"21"21"24"24"

Width1"1"1"1"1-1/4"1-1/4"1"1"1-1/4"1-1/4"1-1/2"1-1/2"1-3/4"1-3/4"1-3/4"2"2"

Teeth perInch1014101461010146104664646

Order No.401-0123401-0126401-0141401-0144401-0147401-0149401-0172401-0175401-0177401-0179401-0180401-0183401-0185401-0212401-0215401-0244401-0247

Telescoping Magnetic Mirror & Pen

Using it get workpiece when operating pressure machine Handle length 220mm

SpecificationMirror Size: 2”x3.5”, Stem Length: 10x 550Mag. Force: 1 Lbs, Stem Length: 10x 5102Pcs Set

Order No.810-0201810-0202810-0203

Order No.810-0204810-0205810-0206

SpecificationMirror Size: 2”, Stem Length: 10x 750Mag. Force: 5 Lbs, Stem Length: 10x 6582Pcs Set

SpecificationMirror Size: 1.25”, Stem Length: 8x 502Mag. Force: 1 Lbs, Stem Length: 8x 4752Pcs Set

Order No.810-0207810-0208810-0209

Magnetic Force1.5 Lbs2 Lbs5 Lbs8Lbs10Lbs

Order No.810-0210810-0211810-0212810-0213810-0214

Size7x 6359x 53510x 61010x 61510x 615

Magnetic Force

1 Lbs

Order No.810-0215810-0216810-0217

Size8x 7107x 6509x 620

Magnetic Safe Catcher

Order No.810-0026810-0027810-0028

Magnetic Force0.7Kg/1.5Lbs2.5Kg/5.5Lbs5Kg/11Lbs

Dimension15x25mm20x25mm25x25mm


Applies a hight frequency switch alteration technique to generate AC power. 12V or 24V Input Voltage. AC220V /50Hz or AC 110V /60Hz output voltage. Input over outage and overload protection. Output overload pretection,

alarm function. Overheat protection. LED alarm indication.

OutputVoltageDC12VDC12VDC12V/24VDC12V/24VDC12V/24VDC6V/12VDC6V/12VDC6V/12VDC6V/12V

OutputCurrent6A10A10A15A30A4A6A12A20A

Inpute 110VOrder No.853-2041853-2042853-2043853-2044853-2045853-2046853-2047853-2048853-2049

Input 220VOrder No.853-2051853-2052853-2053853-2054853-2055853-2056853-2057853-2058853-2059

Input Voltage: AC220V /50Hz or AC 110V /60Hz. Over-current protection. 6V/12V or 12V/24V Selector switch. High-low/speed selector switch.

Order No.853-2042

Order No.853-2043

Order No.853-2059

DC/ADC/ADC/ADC/ADC/AC InC InC InC InC Invvvvverererererter/Bater/Bater/Bater/Bater/Batterttertterttertteryyyyy

Battery Chargers

OutputContinuous150W200W300W500W1000W1500W

Output 110VOrder No.853-2001853-2002853-2003853-2004853-2005853-2006

Output 220VOrder No.853-2011853-2012853-2013853-2014853-2015853-2016

Order No.853-2002


The DC/AC Inverter converts the car purpose DC power or other DC powers intoa standard household purpose power, suitable for the majority of AC-usingappliances, for instance, computer, fax machine, printer, monitor, cell telephone,illumating lights and audio video units.

OutputSurge200W250W400W700W1400W2000W

OutputPeak180W230W360W600W1200W1700W

DC/AC Inverters

OuputPower200W400W500W1000W

Output 110VOrder No.853-2021853-2022853-2023853-2024

Output 220VOrder No.853-2025853-2026853-2027853-2028

OutputPower550W750W1000W1200W

Output 110VOrder No.853-2031853-2032853-2033853-2034

Output 220VOrder No.853-2035853-2036853-2037853-2038

Order No.853-2033Order No.853-2026UPS Model,Dual SocketsSingle Socket

Features direct DC/AC Inverter and UPS, automatically switch to batterypower when DC power fails.

DC/AC Converts

Input Voltage: DC12V. Output Voltage: AC220V /50Hz or AC 110V /60Hz Input current limit protection, or over voltage protection. Output current limit protection. Audio alarm function.

Alkaline & Super Heavy Duty Batteries

TypeDCAAAAA9VDCAAAAA9VDCAAAAA9V

Voltages1.5V1.5V1.5V1.5V9V1.5V1.5V1.5V1.5V9V1.5V1.5V1.5V1.5V9V

QTYPer Pkg.22441224411224202012

PackingBlister-PackBlister-PackBlister-PackBlister-PackBlister-PackShrink PackShrink PackShrink PackShrink PackShrink PackShrink PackShrink PackShrink PackShrink PackShrink Pack

Order No.853-6001853-6003853-6005853-6007853-6009853-6011853-6013853-6015853-6017853-6019853-6021853-6023853-6025853-6027853-6029

TypeDDCCAAAAA9VDDCCAAAAA9V

Voltages1.5V1.5V1.5V1.5V1.5V1.5V9V1.5V1.5V1.5V1.5V1.5V1.5V9V

QTYPer Pkg.22224412222441

PackingBlister-Pack, PVC JacketBlister-Pack, Metal JacketBlister-Pack, PVC JacketBlister-Pack, Metal JacketBlister-Pack , PVC JacketBlister-Pack , PVC JacketBlister-Pack, Metal JacketShrink-Pack, PVC JacketShrink-Pack, Metal JacketShrink-Pack, PVC JacketShrink-Pack, Metal JacketShrink-Pack, PVC JacketShrink-Pack, PVC JacketShrink-Pack, Metal Jacket

Order No.853-6100853-6101853-6102853-6103853-6105853-6107853-6109853-6110853-6111853-6112853-6113853-6115853-6117853-6119

Alkaline

Super Heavy Duty

D C

AA AAA 9V

Digital Battery Testers

Large LCD display for easy readingOne 1.55V silver oxide cell batteryAuto power on/offCan test battery of full size:D, AA, AAA, and 9V 6F22Dimension: 89x27x28mmRange: 0-1.5V/0-9VWorking temp: -5-40 Degree

Order No.853-0011

Large LCD display for easy readingOne 1.55V silver oxide cell batteryAuto power on/offCan test battery of full size:C, AA, AAA, D, N, 9V 6F22 and 1.55V button cellDimension: 92x64x13mmRange: 0-1.5V/0-9VWorking temp: -5-40 DegreeStorage temp: -20-70Degree

Order No.853-0012


Order No. 106-1305

Include one of eachAir Gun, Model No.106-1090.Cleaning Spray Gun, Model No. 106-1001Tire Inflating Gun, Model No.106-1280Spray Gun-Bottom Cup StyleRubber Hose

5 Piece Gun Set

Extension Tip for hard to reach place. Applies high pressure jet of water,

detergent, or degreaser.

Order No. 106-1001

Designed for hard to reach use. Nozzle Length 65mm Fitted Plastic Handle.

Air Duster Guns

Order No. 106-1091

Solid conical tip Prevents blockage of nozzle. Nozzle Length 10mm Fitted Plastic Handle.

Order No. 106-1090

Order No. 106-1097

DescriptionWorking PressureFree Speed(rpm)No-Load AirConsumptionAccumulate TorqueNoiseCapacityWeight

Order No.199-40050.63MPA87000.38stere/min

12.74Nm/2s88dB(A)M50.85kg

DescriptionWorking PressureFree Speed(rpm)No-Load AirConsumptionAccumulate TorqueNoiseCapacityWeight

Order No.199-40070.63MPA600011L/S

50Nm/2s88dB(A)M61kg

Order No.199-40080.63MPA<=14000<=10L/S

>=25Nm/2s88dB(A)M50.96kg

Order No.199-40090.63MPA10000-140000<=10L/S

>=45Nm/2s90dB(A)M51kg

DescriptionWorking PressureFree SpeedNo-Load AirConsumptionAccumulate TorqueNoiseCapacitySide to Center DistanceWeight

Order No.199-40150.63MPA6000rpm11L/S

60Nm/2s88dB(A)M822.5mm

Order No.199-40160.63MPA10000rpm11L/S

50Nm/2s90dB(A)M822.5mm1.1kg

Designed for the measurement of tire pressure of bikes, motorcycles, cars. Measurement rang

0-140 psi, 0-10Bar

View of Press Indicator

Order No.199-40060.63MPA87007.2L/s

20Nm/2s88dB(A)M50.85kg

Pneumatic Screw DriversPneumatic Screw DriversPneumatic Screw DriversPneumatic Screw DriversPneumatic Screw Drivers

Pneumatic Screw Drivers

Pneumatic Wrenchs

Order No. 106-1280

DescriptionWorking PressureThrust Produced byTransmission TubeMaximum Press Rivet ForcePiston StrokePress Rivet Head StrokeRivet DiameterWeight

0.49MPA245kg

39200N70mm7.5mm53.3kg

Press Riveter

Order No.199-4025

DescriptionWorking PressureFree FrequencyEngraving DepthNo-Load AirConsumptionNoiseHose DiameterWeight

0.49MPA217Hz0.1-0.3mm0.33L/S

80dB(A)4.50.07kg

Engraving Stylus

Order No.19-4020

Tire Inflating Gun

Blow Guns

Order No. 397-600S

Thumb Lever Action, Short type

Duster Gun Rated Pressure: 0.2-0.4 Mpa Max. Pressure: 8 kg/cm2

This is mainly used for blowing off dust and metal particles

Air Blow Gun with 25Ft 1/4" Air Hose, (2x1/4"NPT Coupler)

Cleaning Spray Gun


Size ofSpray Nozzle 1.0mm 1.2mm 1.4mm 1.5mm 1.6mm 1.8mm 2.0mm 2.2mm 2.5mm 3.0mm 4.0mm

Bayonet LockOrder No.106-0010106-0012106-0014106-0015106-0016106-0018106-0020106-0022106-0025106-0030106-0040

Cam LockOrder No.106-0110106-0112106-0114106-0115106-0116106-0118106-0120106-0122106-0125106-0130106-0140

Size ofSpray Nozzle 1.0mm 1.2mm 1.4mm 1.5mm 1.6mm 1.8mm 2.0mm 2.2mm 2.5mm 3.0mm 4.0mm

Order No.106-0210106-0212106-0214106-0215106-0216106-0218106-0220106-0222106-0225106-0230106-0240

Spray GunsSpray GunsSpray GunsSpray GunsSpray Guns

Spray Guns-Bottom Cup Style Sprays latex, enamel lacquer stain for general purpose painting jobs. 1000cc, Bottom Cup Adjustable Spray Control. Simple and easy maintenance.

Spray Guns-Liquid Supply Hose Style Sprays latex, enamel lacquer stain for general purpose painting jobs. 8X17mm Painting Supply Rubber Hose Adjustable Spray Control. Simple and easy maintenance.

Size ofSpray Nozzl 1.2mm 1.5mm 1.8mm

Order No.106-0612106-0615106-0618

Sprays latex, enamel lacquer stain for general purpose painting jobs. 750cc. Painting Cup. Simple and easy maintenance.

Spray Guns-Bottom Cup Style

Without Adjustable Spray Control

Size ofSpray Nozzle1.25mm

Order No.106-0725

Low Pressure TypeWithout Adjustable Spray Control

Sprays latex, enamel lacquer stain for general purpose painting jobs. Simple and easy maintenance.

Spray Guns-Bottom Cup Style

Size ofSprayNozzles1.0mm1.2mm1.4mm1.5mm1.6mm1.8mm2.0mm2.2mm2.5mm3.0mm4.0mm

500cc.CupOrder No.106-0310106-0312106-0314106-0315106-0316106-0318106-0320106-0322106-0325106-0330106-0340

750cc.Cup.Order No.106-0410106-0412106-0414106-0415106-0416106-0418106-0420106-0422106-0425106-0430106-0440

1000cc.CupOrder No.106-0510106-0512106-0514106-0515106-0516106-0518106-0520106-0522106-0525106-0530106-0540

Sprays latex, enamel lacquer stain for gen-eral purpose painting jobs. Adjustable Spray Control. Simple and easy maintenance.

Spray Guns-Top Cup Style

Needle-Nozzle-Cap Sets

Accessory For Spray Guns

Size0.5mm0.7mm1.0mm1.2mm1.4mm1.5mm1.6mm1.8mm2.0mm2.2mm2.5mm3.0mm4.0mm

Order No.106-0805106-0807106-0810106-0812106-0814106-0815106-0816106-0818106-0820106-0822106-0825106-0830106-0840


Manifolds

Pneumatic & Hydraulic Applications

Designed for the distribution of air and fluids in pneumatic and hydraulicapplications. They can be used when a convenient, effective, and attractiveconnection is needed.

Manufactured from 16061 aluminum Black anodized finish All port NPT Pre-drilled mounting hols for easy installation Two inlets, one each end Pressure ratings: air 1000psi, non-shock hydraulic 3000 psi Temperature range: -10o to +200oF

No. ofOutlets222222222233333333334444444444555555555556666

InletPipeSize(in.) 1/4 1/4 3/8 3/8 3/8 3/8 1/2 1/2 1/2 1/2 1/4 1/4 3/8 3/8 3/8 3/8 1/2 1/2 1/2 1/2 1/4 1/4 3/8 3/8 3/8 3/8 1/2 1/2 1/2 1/2 1/4 1/4 3/8 3/8 3/8 3/8 1/2 1/2 1/2 1/2 1/4 1/4 3/8 3/8 3/8

OutletPipeSize(in.) 1/8 1/8 1/8 1/8 1/4 1/4 1/4 1/4 3/8 3/8 1/8 1/8 1/8 1/8 1/4 1/4 1/4 1/4 3/8 3/8 1/8 1/8 1/8 1/8 1/4 1/4 1/4 1/4 3/8 3/8 1/8 1/8 1/8 1/8 1/4 1/4 1/4 1/4 3/8 3/8 1/8 1/8 1/8 1/8 1/4

OAL1.753.252.373.252.373.252.373.252.753.252.54.753.254.753.254.753.754.753.754.753.256.254.126.254.126.254.756.254.756.2547.557.557.755.757.755.757.754.759.255.889.255.88

Ht. &W(in.)1.001.001.251.251.251.251.501.501.501.501.001.001.251.251.251.251.501.501.501.501.001.001.251.251.251.251.501.501.501.501.001.001.251.251.251.251.501.501.501.501.001.001.251.251.25

OutletsCtr. to Ctr.Dist0.751.500.881.500.881.501.001.501.001.500.751.500.881.500.881.501.001.501.001.500.751.500.881.500.881.501.001.501.001.500.751.500.881.500.881.501.001.501.001.500.751.500.881.500.88

MountingHole Size0.170.170.200.200.200.200.200.200.200.200.170.170.200.200.200.200.200.200.200.200.170.170.200.200.200.200.200.200.200.200.170.170.200.200.200.200.200.200.200.200.170.170.200.200.20

Order No.106-0911106-0912106-0913106-0914106-0915106-0916106-0917106-0918106-0919106-0920106-0921106-0922106-0923106-0924106-0925106-0926106-0927106-0928106-0929106-0930106-0931106-0932106-0933106-0934106-0935106-0936106-0937106-0938106-0939106-0940106-0941106-0942106-0943106-0944106-0945106-0946106-0947106-0948106-0949106-0950106-0951106-0952106-0953106-0955106-0954

No. ofOutlets6666667777777777888888888899999999910101010101010101010

InletPipeSize(in.)3/81/21/21/21/21/41/43/83/83/83/81/21/21/21/21/41/43/83/83/83/81/21/21/21/21/41/43/83/83/83/81/21/21/21/21/41/43/83/83/83/81/21/21/21/2

OutletPipeSize(in.) 1/4 1/4 1/4 3/8 3/8 1/8 1/8 1/8 1/8 1/4 1/4 1/4 1/4 3/8 3/8 1/8 1/8 1/8 1/8 1/4 1/4 1/4 1/4 3/8 3/8 1/8 1/8 3/8 3/8 1/4 1/4 1/4 1/4 3/8 3/8 1/8 1/8 1/8 1/8 1/4 1/4 1/4 1/4 3/8 3/8

OAL9.256.759.256.759.255.510.756.7510.756.7510.757.7510.757.7510.756.2512.257.6212.257.6212.258.7512.258.7512.25713.758.513.758.513.759.7513.759.7513.757.7515.259.3815.259.38115.310.7515.2510.7515.25

Ht. &W(in.)1.251.501.501.501.501.001.001.251.251.251.251.501.501.501.501.001.001.251.251.251.251.501.501.501.501.001.001.251.251.251.251.501.501.501.501.001.001.251.251.251.251.501.501.501.50

OutletsCtr. to Ctr.Dist1.501.001.501.001.500.751.500.881.500.881.501.001.501.001.500.751.500.881.500.881.501.001.501.001.500.751.500.881.500.881.501.001.501.001.500.751.500.881.500.881.501.001.501.001.50

MountingHole Size0.200.200.200.200.200.170.170.200.200.200.200.200.200.200.200.170.170.200.200.200.200.200.200.200.200.170.170.200.200.200.200.200.200.200.200.170.170.170.200.200.200.200.200.200.20

Order No.106-0956106-0957106-0958106-0959106-0960106-0961106-0962106-0963106-0964106-0965106-0966106-0967106-0968106-0969106-0970106-0971106-0972106-0973106-0974106-0975106-0976106-0977106-0978106-0979106-0980106-0981106-0982106-0983106-0984106-0985106-0986106-0987106-0988106-0989106-0990106-0991106-0992106-0993106-0994106-0995106-0996106-0997106-0998106-0999106-1000

ManifoldsManifoldsManifoldsManifoldsManifolds


Motor .…1.5HP; 120V; 9AMPs; Universal Type Pressure Max…..…...…………………..…115psi Tank Size……….…....2.6 Gallon Pancake Tank Capacity @ 90psi.…………........…....3.1 CFM Capacity @ 115psi...….…...…..........2.9 CFM NW./GW.……………..….....……. 12 / 13.5 Kg Packing Size .................... 400×390×480(mm)

Motor …..2.0HP; 120V; 60Hz,14AMPs; 3400RPMPressure Max…............……...……..………115psiTank Size………...........…...4.6 Gallon Twins TankCapacity @ 90psi….….…………...........5.6 CFMCapacity @ 115psi…..….………….........4.5 CFMNW./GW……….……….…………. ........24 / 26 KgPacking Size .........................480×440×465(mm)

2.6 Gallon Pancake Tank

Stack Tank

Motor …2.5HP; 120V; 60Hz,15AMPs; 3400RPMPressure Max..………......……….….……115psiTank Size………..……….….…....10 Gallon TankCapacity @ 90psi…….....…....…….....6.1CFMCapacity @ 115psi…...…..…....……....4.7CFMNW./ GW……………...….….……….….34/37 KgPacking Size (L×W×H )…....630×360×760(mm)

6.5 Gallon Hot Dog TankType 2

10 Gallon Hot Dog Tank

Motor ...2.5HP; 120V; 60Hz,15AMPs; 3400RPMPressure Max……….....……….…..………115psiTank Size……………………........6.5Gallon TankCapacity @ 90psi………..….....……....6.1CFMCapacity @115psi…..…...…........…….4.7CFMNW./ GW…………….….…....……...….27/29 KgPacking Size (L×W×H )….…630×325×700(mm)

Motor …2.0HP; 115V; 60Hz,14AMPs; 3450RPMTank Size……………....…….........4 Gallon TankCapacity @ 90psi……..……….............5.6CFMCapacity @ 115psi..……..…….............4.5CFMNW/GW……....………..........…….......23/24.5kgPacking Size ...........….… ....395×375×660(mm)

4 Gallon Pancake Tank

Oil Free Air Compressor

The exhaust of the pressure can be adjusted.

Motor ………....................1.0HP; 120V; 9AMPsPressure Max…………..........……..………125psiTank Size..……………..................4 Gallon TankCapacity @ 40psi…..…....…….............3.7CFMCapacity @ 90psi.....…....…….............2.6CFMNW/GW……................….……...….......5.3/6kgPacking Size ...........………. 385×270×285(mm)

Motor ...2.5HP; 120V; 60Hz,15AMPs; 3400RPMPressure Max……….....………….….……115psiTank Size………………………....6.5 Gallon TankCapacity @ 90 psi……....…...…….....6.0 CFMCapacity @ 115 psi……....….......…....4.6CFMNW./ GW………….……………...….….27 /29 KgPacking Size (L×W×H )….… 630×330×630(mm)

6.5 Gallon Hot Dog TankType 1

Capable of handling most pneumatic tools. Lightweight and a low center of gravity. The compressors are direct drive and have a long life against

wear and tear due to low coefficient of friction. 1/4” NPT pressure regulator. Brass and copper fittings.

Order No.199-6026

Order No.199-6046

Order No.199-6066


Order No.199-6040

Order No.199-6065

Air CompressorsAir CompressorsAir CompressorsAir CompressorsAir Compressors

Air Compressors


with 5”/127mm Round LensAC120/230V, 3 Diopter, Power is 1.75Xa 22W circular fluorescent bulbfeature lock control at the arm joint.

ColorLight GreyWhiteBlack

withoutLens CoverOrder No.854-0411854-0412854-0413

withLens CoverOrder No.854-0481854-0482854-0483



withoutLens CoverOrder No.854-0401854-0402854-0403


2-1/2” Adjustable C-Clamp 36”/920mm Arm length.


9.9lbs/4.5kg Plastic Weighted Base. 24”/600mm Arm length.

Pedestal Base Model

C-Clamp Model Ballast On Arm

C-Clamp Model Ballast In Base

Weighted Base Model

Round Head Magnifier Lamps

27”/690mm Pedestal length 32”/800mm Arm length.

AC120/230V, 3 Diopter, Power is 1.75X22W circular fluorescent bulb

C-Clamp Ballast On Arm 2-1/2” Adjustable C-Clamp 32”/800mm Arm length.

C-Clamp Ballast On Arm 2-1/2” Adjustable C-Clamp 36”/920mm Arm length.


C-ClampBallast On ArmOrder No. 854-0521 854-0522 854-0523

C-ClampBallast In BaseOrder No.854-0501854-0502854-0503

Weighted Base

9.9lbs/4.5kg Plastic Weighted Base. 24”/600mm arm length.

C-Clamp Ballast On Arm 27”/690mm Pedestal Length 32”/800mm Arm length.

WeightedBaseOrder No.854-0581854-0582854-0583

PedestalBaseOrder No.854-0571854-0572854-0573

with 5”/127mm Round Lens


Large Lens

Order No.854-0101854-0102854-0103

Single On/Off Button. 2-1/2” Adjustable C-Clamp 32”/800mm Arm length.

Small LensOrder No.854-0201854-0202854-0203

AC120/230V, 3 Diopter, Power is 1.75X. Large Lens of 7.5x6.2” (190x158mm) size rectangular feature:

Two 9W H Shape fluorescent bulb (Energy Saving Model) Small Len Size :7x5.2”, rectangular feature: Two 7W H Shape fluorescent bulb (Energy Saving Model)

C-Clamp Model

Large LensOrder No.854-0141854-0142854-0143

Weighted Base Model 9.9lbs/4.5kg Plastic Weighted Base. 24”/600mm Arm length.


Magnifier Lamps

Magnifier LampsMagnifier LampsMagnifier LampsMagnifier LampsMagnifier Lamps

Pedestal Base Model 27”/690mm Pedestal Length 32”/800mm Arm length.

Large LensOrder No.854-0131854-0132854-0133


WeightBase Model

PedestalBase Model

Handled Peach Head Magnifier Lamps

C-Clamp Ballast On Arm C-Clamp Ballast In Base


AC120/230VTwo 15W fluorescent bulbfor Electronic assembly, office and laboratoriesapplications., quality control inspection illumination.Feature weighted base, pedestal Base, clampbracket.Arms are consisted of square steel tubes withplastic coating and steel springs .

Square Ballast. 36”/920mm Arms.

32”/800mm Arms.

27”/690mm Pedestal length 32”/800mm Arm length.

Weighted Base Model

Pedestal Base Model

C-Clamp ModelBallast On Arm

C-Clamp ModelBallast In Base

9.9lbs/4.5kg Weighted Base. 32”/800mm Arms.

Include one AC-DC Adaptor & Car Adaptor

AC 110V/220V, DC 12V, 8W

Order No. 852-2081AC 110V/220V, DC 12V, 8W

Order No. 852-2080

Basic Model with Stand Model

Description30W, AC110V/220V VDE Plug30W, AC110V/220V UL Plug30W, AC110V/220V CE Plug

Order No.852-2100852-2101852-2102

VDE CEUL

Multidirectional hanging hook.

Desk Lighting

Fluorescence Working Lamps

Fluorescence Work Lights

Light GreyWhiteBlack

C-ClampBallast in BaseOrder No.

C-ClampBallast on ArmOrder No.

Weighted BaseOrder No.

PedestalBaseOrder No.

Magnifier LampsMagnifier LampsMagnifier LampsMagnifier LampsMagnifier Lamps

854-0621854-0622854-0623

854-0601854-0602854-0603

854-0641854-0642854-0643

854-0631854-0632854-0633

Color

AC120/230V, 3 Diopter, Power is 1.75X22W circular fluorescent bulb

Pedestal Base Model


9.9lbs/4.5kg Plastic Weighted Base. 24”/600mm Arm length.

27”/690mm Pedestal length 32”/800mm Am length.

C-Clamp Model

Weighted Base Model

WeightedBaseOrder No.854-0341854-0342854-0343


C-ClampOrder No.854-0301854-0302854-0303

PedestalBaseOrder No.854-0331854-0332854-0333

with 5”/127mm Round Lens

Peach Head Magnifier Lamps

Working Lights

48pcs LED LightAluminum BracketExtend from 1.10m to 1.50m3m cord with DC 12V plug

LED Working Light96pcs LED Light9.6V 2200mA NI-MH rechargeable batteryAC/DC adaptorSwivel hookExtend from 1.15m to 1.8m

Order No. 852-2096

Order No. 852-2048

1097LED Working Light28pcs LED LightNi-MH rechargeable batteryAC/DC and DC adaptorStrong Magnet

1066LED Working Light28pcs LED LightNi-MH rechargeable batteryAC/DC and DC adaptor

Order No. 852-2082

Order No. 852-2083


SpotlightsSpotlightsSpotlightsSpotlightsSpotlights

3W LED SpotlightCombined spotlight and lantern functionSealed Lead Acid rechargable batteryAC/DC and DC adaptorSwivel handle

LED Spotlights

3W LED SpotlightCombined spotlight and lantern functionWarning LED for emergency useSealed Lead Acid rechargable batteryAC/DC and DC adaptorSwivel handle

Order No. 852-0120 Order No. 852-0121

3W LED SpotlightDry battery

3W LED SpotlightSealed Lead Acid rechargable batteryAC/DC and DC adaptor

Order No. 852-0122 Order No. 852-0123

10pcs LED lightSealed Lead Acide rechargeable batteryAC/DC and DC adaptorDynamo function

Order No. 852-0124

Order No. 852-0125

Order No. 852-0126

1pc 1W LED lightSealed Lead Acide rechargeable batteryAC/DC and DC adaptorDynamo function

1pc 3W LED lightSealed Lead Acid rechargeable batteryAC/DC and DC adaptor

Combined 9pcs LED and 1pc Halogen BulbSealed Lead Acide rechargeable batteryAC/DC and DC adaptorDynamo function

Order No. 852-0127

Order No. 852-0128

Order No. 852-0129

1W LED lightSealed Lead Acide rechargeable batteryAC/DC and DC adaptorDynamo function

3W LED lightSealed Lead Acide rechargeable batteryAC/DC and DC adaptor

Include one AC-DC adaptor, car adaptor & quartz halogen bulb. 4”/100mm lens diameter. Spotlight Beam brighten up to one mile.

Description0.5Million Candlepower, 6v/25w/H31Million Candlepower, 6v/55w/H31Million Candlepower, 6v/5w Bulb, 9 LedCharger

Order No.852-1050852-1100852-1110852-1150

Rechargeable Spotlights

Order No.852-4050852-4075852-4100

Description0.5Million Candlepower, 6v/25w/H30.75Million Candlepower, 6v/35w/H31Million Candlepower, 6v/55w/H3

Description0.5Million Candlepower, 6v/25w/H30.75Million Candlepower, 6v/35w/H31Million Candlepower, 6v/55w/H3

Order No.852-3050852-3075852-3100

Include one AC-DC adaptor, car adaptor & quartz Halogen Bulb. Complete with locking switch.

Include one car adaptor & quartz Halogen bulb. Complete with locking switch.

Rechargeable Quartz Halogen Spotlights

Quartz Halogen Spotlights

1W and 3W LED lightSealed Lead Acide rechargeable batteryAC/DC and DC adaptor5V output for mobile charging

16pcs LED lightSealed Lead Acide rechargeable batteryAC/DC and DC adaptorDynamo function5V output for mobile charging

LED Spotlights

Order No. 852-0130

Order No. 852-0131


Order No.150-3010

Order No.150-3015

DescriptionDia. of RollerRollers NumberHeight(mm)Holding WeightWeight

Order No.150-301038mm1710-115045kg4.5kg

Order No.150-3016

Order No.150-3007

Order No.150-3008

Order No.150-3014

Order No.150-3002

Order No.150-3006

Order No.150-301635mm1620-105030kg5.5kg

Order No.150-300650mm1700-110080kg7kg

Order No.150-301438mm2680-110060kg8kg

Order No.150-300838mm1610-105045kg4.5kg

Order No.150-300738mm1680-1050040kg5.5kg

Order No.150-300257mm1680-110080kg9.5kg

Order No.150-301538mm2670-112050kg7.5kg

Order No.150-3020

Order No.150-3025

Order No.150-302052mm1580-970900kg20kg

Order No.150-302552mm2580-970900kg20kg

Order No.150-3005

Order No.150-3001

Order No.150-300157mm1680-114080kg9.4kg

Order No.150-300557mm5680-114080kg16.2kg

Roller StandsRoller StandsRoller StandsRoller StandsRoller Stands

Roller Stands

DescriptionDia. of RollerRollers NumberHeight(mm)Holding WeightWeight

DescriptionDia. of BallNo.of BallsHeight(mm)Max. HoldingWeight

Order No.150-303016mm8660-111080kg7.3kg

Order No.150-3035

Order No.150-303516mm8680-113080kg9.4kg

Order No.150-303725mm8660-111080kg7.6kg

Order No.150-3037

Order No.150-3030

Order No.150-3031

Order No.150-3036

Order No.150-3039

Order No.150-303116mm8700-110080kg7.3kg

Order No.150-303616mm8700-110080kg7kg

Order No.150-303925mm8700-110080kg9.4kg

Ball Stands

Order No. 150-3092

Order No.150-309216mm38mm610-105050kg6.5kg

Order No.150-309116mm57mm720-114080kg9.0kg

DescriptionDia. of BallDia. of RollerHeight(mm)Holding WeightWeight

Order No. 150-3091

Ball and Roller Stands


DescriptionDia. of BallLength of BracketNo. of BallMax. Holding WeightWeightPacking Size of 10 PCS

Order No.150-334016mm4007100kg2.2450x355x265

Order No.150-336016mm60010100kg3.3650x355x265

Order No.150-338016mm80013100kg4.4850x355x265

Dia.ofBall161616252525

Table Size(mm)1650x4921650x6921650x8921650x4921650x6921650x892

Balls ofeachBracket811166811

No.ofBrackets999999

Height(mm)690-1130690-1130690-1130690-1130690-1130690-1130

Max.HoldingWeight300kg300kg300kg300kg300kg300kg

Weight43kg52kg61kg52kg64kg77kg

Packing Size(mm)1730x520x1951730x720x1951730x920x1951730x520x1951730x720x1951730x920x195

Dia.of Ball25252525

TableSize791215

No.ofbracket9999

Table Size(mm)2000x4502000x6502000x8502000x1050

Height(mm)670-1070670-1070670-1070670-1070

Max.Holding800kg800kg800kg800kg

Weight56kg71.5kg85kg95kg

Packing Size2080x480x2302080x680x2302080x880x2302080x1080x230

DescriptionDia. of BallLength of BracketNo. of BallMax. Holding WeightWeightPacking Size of 10 PCS

Order No.150-324025mm4005500kg2.3450x380x285

Order No.150-326025mm6008500kg3.5650x380x285

Order No.150-328025mm80010500kg4.7850x380x285

Order No.150-3349150-3369150-3389150-3449150-3469150-3489

Order No.150-3145150-3165150-3185150-3205

Bolted construction easy for trans portation, assembly, and table parts replacement. Adjustable height from 690-1130mm Multi-directional feature.

Bolted construction easy for transportation, assembly, and table parts replacement. Adjustable height from 690mm-1070mm Multi-directional feature.

Ball and Bracket Sets

RRRRRoller oller oller oller oller TTTTTaaaaabbbbbleslesleslesles

Light Duty

Ball Transfer Tables

Heavy Duty

DescriptionDia. of RollerLength of RollersMax. Holding WeightWeightPacking Size of 10 PCS

Order No.150-344057mm400100kg2.5kg500X455X225

Order No.150-345057mm500100kg3.0kg600x455x225

Order No.150-346157mm600100kg3.5kg700x455x225

Order No.150-343660mm360500kg4kg455x440x225



DescriptionDia. of RollerLength of RollersMax. Holding WeightWeightPacking Size of 10 PCS

Light Duty

Heavy Duty

Light Duty Roller & Bracket Sets

Roller Tables

Order No.150-3080

SpecificationsDia. of RollerNumber of RollersHeightMax. Holding WeightWeightTable Size

57mm9680-1130mm200kg56kg173x51x17cm

60mm9650-1050mm800kg62kg208x50x21cm

SpecificationsDia. of RollerNumber of RollersHeightMax. Holding WeightWeightTable Size

Order No.150-3085

DescriptionDia. of RollerNumber of RollersHeight(mm)Max. Holding WeightWeightTable Size(cm)

Order No.150-3070

60mm4650-1100400kg52.5kg108x47x17

150-307560mm7650-1100400kg75kg205x47x17

Light Duty

Heavy Duty

Order No.150-3070


Order No.Capacity (lbs/kg)Max. Fork Height (inch) (mm)Min. Fork Height (inch) (mm)Fork Length (inch/mm)Width Overall Forks (inch/mm)

Individual Fork Width (inch/mm)

Load Roller Diameter (inch) (mm)

Steering Wheel Diameter (inch) (mm)Net Weight (lbs/kg)Quantities/20’ Container(PCS)

838-02014400/20007.9”(or7.5”)200(or 190)3.3”(or2.9”)85(or 74)45.3”/ 115021.3”/ 5406.3”/160

3.2(or2.8)” 82 (or 72)

Nylon,Polyurethane

7.9(or7.1)” 200 (or 180)

Nylon, RubberPolyurethane165/ 75180

838-02024400/20007.9”(or7.5”)200(or 190)3.3”(or2.9”)85(or 74)48”/ 122026.8”/ 6806.3”/160

3.2(or2.8)” 82 (or 72)

Nylon,Polyurethane

7.9(or7.1)” 200 (or 180)


838-02515500/25007.9”(or7.5”)200(or 190)3.3”(or2.9”)85(or 74)45.3”/ 115021.3”/ 5406.3”/160

3.2(or2.8)” 82 (or 72)

Nylon,Polyurethane

7.9(or7.1)” 200 (or 180)


838-02525500/25007.9”(or7.5”)200(or 190)3.3”(or2.9”)85(or 74)48”/ 122026.8”/ 6806.3”/160

3.2(or2.8)”¦Õ82 (or 72)Nylon,Polyurethane

7.9(or7.1)” 200 (or 180)


838-03016600/30007.9”(or7.5”)200(or 190)3.3”(or2.9”)85(or 74)45.3”/ 115021.3”/ 5406.3”/160

3.2(or2.8)” 82 (or 72)

Nylon,Polyurethane

7.9(or7.1)” 200 (or 180)


838-03026600/30007.9”(or7.5”)200(or 190)3.3”(or2.9”)85(or 74)48”/ 122026.8”/ 6806.3”/160

3.2(or2.8)” 82 (or 72)

Nylon,Polyurethane

7.9(or7.1)” 200 (or 180)


838-0221*4400/20007.9”(or7.5”)200(or 190)3.3”(or2.9”)85(or 74)45.3”/ 115021.3”/ 5406.3”/160

3.2(or2.8)” 82 (or 72)

Nylon,Polyurethane

7.9(or7.1)” 200 (or 180)


838-0222*4400/20007.9”(or7.5”)200(or 190)3.3”(or2.9”)85(or 74)48”/ 122026.8”/ 6806.3”/160

3.2(or2.8)” 82 (or 72)

Nylon,Polyurethane

7.9(or7.1)” 200 (or 180)


A built in overload valve and totally sealed hydraulic pump, seals of hydraulic pump are imported from Germany. Heavy duty 1 piece “C” section forks for greatest strength and durability, super strong frame can load Max. 3000kg. Two nylon entry and exit rollers prevent physical exertion of the operator and protect load wheels and pallet. Load Roller: Single or tandem nylon, polyurethane. steering wheel: nylon, polyurethane, rubber.

* Quick Lifting Pallet Truck : 5 pump strok to Max. fork height.

Hand PHand PHand PHand PHand Pallet allet allet allet allet TTTTTrrrrrucucucucucksksksksks

Hand Pallet Trucks

Scale Accuracy(Mettler-ToledoSensor & scale)2000kg(4400lbs)2000kg(4400lbs)2000kg(4400lbs)2000kg(4400lbs)

Capacity(kg/lbs)2000/44002000/44002000/44002000/4400

Min./Max.Fork Height(mm/inch)85/200(3.3/7.9’’)85/200(3.3/7.9’’)85/200(3.3/7.9’’)85/200(3.3/7.9’’)

Length(mm/inch)1150/45’’1150/45’’1150/45’’1150/45’’

WidthOverForks(mm/inch)548/22’’688/27’’548/22’’688/27’’

ForkWidth(mm/inch)168/6.6168/6.6168/6.6168/6.6

NetWeight(kg/lbs)85/18788/19485/18788/193

Quantities in 20’Container36 PCS32 PCS36 PCS32 PCS

Order No.838-1201838-1202838-1203838-1204

Hand Pallet Trucks with Scale

Min. Lowered Height 55mm Rollers: Steel or nylon Wheels: Nylon, Polyurethane, Rubber. Special Fork Length: 950mm

Capacity(lbs/kg)4400/20004400/2000

Min. LoweredFork Height(inch/mm)2.1”/ 55mm2.1”/ 55mm

Length(inch/mm)44.9”/ 115044.9”/ 1150

WidthOver Forks(inch/mm)21.1”/ 54026.5”/ 680

ForkWidth(inch/mm)6.2”/ 1606.2”/ 160

NetWeight(lbs/kg)158/72169/77

Quantities in20’ container180144

Order No.838-0261838-0262

Low Profile Pallet Trucks


Capacity 1500kg

Order No.CapacityLowered HeightMax. Fork HeightFork Overall WidthFork LengthLoad CentreLoad DistanceWheel BaseNet Weight (no battery)Overall LengthOverall WidthOverall HeightDimensionDimensionDimension

838-15013300lbs/1500kg3.3”/85mm8”/205mm20.5”/520mm39”/1000mm23.6”/600mm31”/795mm49”/1240mm8.5lbs/215kg64”/1635mm26”/660mm52”/1310mm8”/200mm8”/200mm59”/1500mm

838-15023300lbs/1500kg3.3”/85mm8”/205mm20.5”/520mm45”/1150mm25.6”/650mm37”/945mm55”/1390mm8.8lbs/223kg70”/1785mm26”/660mm52”/1310mm8”/200mm8”/200mm65”/1650mm

838-15033300lbs/1500kg3.3”/85mm8”/205mm27”/680mm39”/1000mm23.6”/600mm31”/795mm49”/1240mm8.9lbs/225kg64”/1635mm26.8”/680mm52”/1310mm8”/200mm14.2”/360mm59”/1500mm

838-15043300lbs/1500kg3.3”/85mm8”/205mm27”/680mm45”/1150mm25.6”/650mm37”/945mm55”/1390mm9.3lbs/235kg70”/1785mm26.8”/680mm52”/1310mm8”/200mm14.2”/360mm65”/1650mm

Frame: Heavy duty design with all-steel reinforced frame.Brake system: iIntegral electromagnetic disk brake mounted on motor shaft.Power Source: Two pieces 80AH/12V battery with separate charger. Battery weight:30kg/pc.Drive Wheel: Complete gear train mounted on ball and roller bearing in oil bathhousing. High-torque horizontally mounted motor has copper graphite brushes forexcellent commutation and fabrication motor: 660W/24V.Wheel : 250x80mmLoad Roller: Tandem or Single Polyurethane RollerTandem roller: 78x70mmSingle roller: 78x100mmTraveling Speed: With load 5km/h Without load 6.5km/h

Hand PHand PHand PHand PHand Pallet allet allet allet allet TTTTTrrrrrucucucucucksksksksks

Semi-Electric Pallet Trucks

hh2mICXY

LWHanWa

Powered Pallet Trucks

Order No.PlatformCapacity(kg)Load Center(C, mm)Max Fork Height(H,mm)Lowered Fork Height(h,mm)Fork Length(L1, mm)Overall Fork Width(B, mm)Individual Fork Width(b,mm)Wheel Base(y,mm)Turning Radius(Wa,mm)Traveling Speed with/without load(Km/h)Lifting Speed with/without load(mm/s)Lowering Speed with/without load(mm/s)Drive WheelPower Unit(Lifting motor)Traction BatteryBattery ChargerOverall Dimension(LxWxH,mm)Net Weight(without battery,kg)

Heavy Duty DesignSmooth stepless speed control made in EuropePower unit and drive wheel made in EuropePowerfull traction batteryConforms to EN1726 and EN 1175-1

Specification

838-1506Without

530

1608

1781x690x1305324

838-1507Without2000600205851150680160140616083.6/5.422/3250/551200W,Dia.250mm800W/24V24V/210Ah,185Kg25A/24V1781x690x1305329

838-1508With

530

1946

2125x690x1305338

838-1509With

680

1946

2125x690x1305343


Order No.838-2101838-2102

Capacitykg/lbs1000/22001000/2200

Max. ForkHeightmm/inch800/31.5’’800/31.5’’

ForkLengthmm/inch1150/45.3’’1150/45.3’’

Overall ForkWidth (B)mm/inch540/21.3’’680/26.8’’

NetWeightkg/lbs110/242125/275

Lift Hand Lift Hand Lift Hand Lift Hand Lift Hand TTTTTrrrrrucucucucucksksksksks

Manual High Lift Hand TrucksCapacity 1000kg (2200lbs)

Order No.Capacity (lbs/kg)Load Centre C (inch/mm)Max. Fork Height H (inch/mm)Lowered Fork Height h (inch/mm)Fork Width D (inch/mm)Fork Length L (inch/mm)Overall Fork Width E (inch/mm)Ground Clearance X (inch/mm)Min. Turning Radius (Outside) (inch/mm)Front Load Roller (inch) (mm)Steering Wheel (inch) (mm)Overall Length A (inch/mm)Overall Width B (inch/mm)Overall Height F (inch/mm)Net Weight (lbs/kg)

838-4101 2200/1000 23”/58560” /15253.5” /886.3” /16046.1” /117021.3” /5401.3” /3243.3” /1100

3.1x3” 80x75

5.9x2.2” 150x5561” /155026.8” /68080.7” /2050507 /230

838-41022200/100023” /585113.6” /28853.5” /886.3” /16046.1” /117021.3” /5401.3” /3243.3” /1100

3.1x3” 80x75

5.9x2.2” 150x5561” /155026.8” /68076.8” /1950816 /370

Compact design and strong accurate steel construction Top quality hydraulic pump and cylinder with Germany seal kit. Heavy Duty 1 piece “C” section forks for greatest strength. Top of stroke bypass valve and overload valve built in. 3 way hand control with neutral allows the operator to maneuver

the load safety and effortlessly. Advanced hand brake system , without foot brake system. It is a

proven fact that there is less likelihood of injury when the operator always has both feet firmly on the ground. Randem load rollers, steering wheels, with safety guard.

Order No. 838-4102Order No. 838-4101

Hand StackersCapacity 1000kg

Capacitykg/lbs1000/22001000/2200

Max. ForkHeightmm/inch800/31.5’’ 800/31.5’’

ForkLengthmm/inch1150/45.3’’1150/45.3’’

Overall Fork Width (B)mm/inch540/21.3’’680/26.8’’

BatteryV-AH12-6012-60

BatteryChargerV-A12-1012-10

NetWeightkg/lbs110/242125/275

Order No.838-3101838-3102

Electric High Lift Hand Trucks


Order No.Capacity (lbs/kg)C (inch/mm)I (inch/mm)X (inch/mm)S (inch/mm)X2 (inch/mm)Y (inch/mm)L2 (inch/mm)L (inch/mm)M (inch/mm)N (inch/mm)H1 (inch/mm)H3 (inch/mm)H4 (inch/mm)B (inch/mm)Wa (inch/mm)Net Weight (lbs/kg)(without battery)

838-52002640/120023.6”/60045.3”/115017.7”/4502.2”/567.5”/19048.8”/124028.7”/73074”/188021.3”/5406.3”/16082.3”/209063”/160090.6”/230033”/84059”/15001351/614

838-52013300/150023.6”/60045.3”/115017.7”/4502.2”/567.5”/19049.6”/126029.5”/75074.8”/190021.3”/5406.3”/16082.3”/209063”/160090.6”/230033”/84059.8”/15201351/614

838-52022640/120023.6”/60045.3”/115017.7”/4502.2”/567.5”/19048.8”/124028.7”/73074”/188021.3”/5406.3”/16071”/180096.5”/2450124”/315033”/84059”/15001474/670

838-52033300/150023.6”/60045.3”/115017.7”/4502.2”/567.5”/19049.6”/126029.5”/75074.8”/190021.3”/5406.3”/16071”/180096.5”/2450124”/315033”/84059.8”/15201474/670

838-52042640”/120023.6”/60045.3”/115017.7”/4502.2”/567.5”/19048.8”/124028.7”/73074”/188021.3”/5406.3”/16079.7”/2025114.2”/2900141.7”/360033”/84059”/15001522/692

838-52053300”/150023.6”/60045.3”/115017.7”/4502.2”/567.5”/19049.6”/126029.5”/75074.8”/190021.3”/5406.3”/16079.7”/2025114.2”/2900141.7”/360033”/84059.8”/15201522/692

838-52062640/120023.6”/60045.3”/115017.7”/4502.2”/567.5”/19048.8”/124028.7”/73074”/188021.3”/5406.3”/16083.7”/2125122”/3100149.6”/380042.5”/108059”/15001551/705

838-52073300/150023.6”/60045.3”/115017.7”/4502.2”/567.5”/19049.6”/126029.5”/75074.8”/190021.3”/5406.3”/16083.7”/2125122”/3100149.6”/380042.5”/108059.8”/15201551/705

838-52082640/120023.6”/60045.3”/115017.7”/4502.2”/567.5”/19048.8”/124028.7”/730174”/88021.3”/5406.3”/16087.6”/2225130”/3300157.5”/400042.5”/108059”/15001571/714

838-52093300/150023.6”/60045.3”/115017.7”/4502.2”/567.5”/19049.6”/126029.5”/75074.8”/190021.3”/5406.3”/16087.6”/2225130”/3300157.5”/400042.5”/108059.8”/15201571/714

Battery: 240AH/24V, 32kg/pcsx6pcs=192kgMotors Traveling: 0.9KW/24V(capacity: 1200kg); 1.2KW /24V(capacity: 1500kg)Motors Lifting: 2.2KW/24VFront Roller: 1200kg: 82x80(single roller)

1500kg: 82x80(tandem roller)Rear Roller: 150x50mmDrive Wheel: 250x80mm

Heavy duty design-robust and stable. High quality European electronic control system-smooth and step less moving. Powerful power pack and drive wheel are made in Europe.

Electric StacElectric StacElectric StacElectric StacElectric Stackkkkkererererersssss

Full Electric Stackers

Capacity 1200kg, 1500kg

Order No.Capacity (lbs/kg)Lifting HeightLifting Speedwith LoadLifting Speedwithout LoadPowerBatteryBattery ChargerSteering Wheel

Load Roller

Overall Dimension(LxWxH) (mm)Net Weight (lbs/kg)

838-51012200/100096.5”/ 2450mm

2.8”/s ( 72mm/s)4.3”/ s(110mm/s)

800W135AH/12V15AH/12V

7.1x2”180x50mm

3.2x3.1”82x80mm71.7x31.5x70.9”1820x800x18001014/460

838-51022200/1000112.2”/ 2850mm

2.8”/ s(72mm/s)4.3”/ s(110mm/s)

800W135AH/12V15AH/12V

7.1x2”180x50mm

3.2x3.1”82x80mm71.7x31.5x78.7”1820x800x20001080/490

838-51032200/1000122”/ 3100mm

2.8”/ s(72mm/s)4.3”/ s(110mm/s)

800W135AH/12V15AH/12V

7.1x2”180x50mm

3.2x3.1”82x80mm71.7x42.9x83.7”1820x1090x21251169/530

838-51042200/1000130”/ 3300mm

2.8”/ s(72mm/s)4.3”/ s(110mm/s)

800W135AH/12V15AH/12V

7.1x2”180x50mm

3.2x3.1”82x80mm71.7x42.9x87.6”1820x1090x22251212/550

Compact design and top quality mast construction. Safety guard on load roller and steering wheel. Light and easy manual steering system.

Capacity 1000kg, Lifting Height: 2450-3300mm

Semi-Electric Stackers


New design to meet new CE norm EN 1757-3. New hydraulic system increases safety and protects your goods,

stepless rate of lowering system remains irrespective of the weight of the load.

Lift Tables

Capacity(lbs/kg)330/150550/2501100/5001650/7502200/1000660/3001100/500

Table SizeLxW(inch/mm)27.6x17.7”/700x45032.7x19.7”/830x50039.8x20.5”/1010x52039.8x20.5”/1010x52039.8x20.5”/1010x52039.8x20.5”/1010x52039.8x20.5”/1010x520

Table HeightH(Min./Max.)inch(mm)10/30” (255/760)12.4/35.8” (315/910)16.9/39.4” (430/1000)17/39.4” (432/1000)17.3/37.8” (440/960)17.1/62.4” (435/1585)17.1/62.4” (435/1585)

HandleHeighth(inch/mm)39.4/100043.3/110044.5/113044.5/113044.5/113044.5/113044.5/1130

WheelDia.(inch/mm)3.9/1004.9/1255.9/1505.9/1505.9/1505.9/1505.9/150

OverallSizeBxC(inch/mm)17.7x37.4”/450x95019.7x39.8”/500x101020.5x49.6”/520x118520.5x49.6”/520x126020.5x49.6”/520x126020.5x49.6”/520x126020.5x49.6”/520x1260

Foot PedaltoMax. Height(inch/mm)0.6’’/161’’/251.7’’/442.2’’/553’’/752.1’’/532.7’’/68

NetWeight(lbs/kg)90/41172/78260/118264/120301/137330/150370/168

Order No.837-0015837-0025837-0050837-0075837-0100837-0030837-0051

Simple and easy operation, lifting movement via collapsible foot pedal, sensitive lowering through sinking valve, hand push drive, overload protection via pressure valve. Safe operation and secure working conditions, stable chassis with 2 frame rollers and 2 steering rollers. Long Service lift, robust construction, frame hard chromium plated, hardened chromium plated ram. Effortless movement, ball bearing rollers, polyurethane rollers. Practical drawer under the platform.

Order No.CapacityMax. Platform Height HMin. Platform Height H1Platform Length L1Platform Width WTotal Width BTotal Length LTotal Height H2Steering Rollers-Diameter DFrame Rollers-Diameter dPump Handle MovementsNet Weight

838-4321440lbs/200kg33.5”/850mm7.9”/200mm23.6”/600mm19.7”/500mm22”/560mm37”/940mm37.8”/960mm4.9”/125mm5.1”/130mm0.6”/15mm99lbs/45kg

838-4322440lbs/200kg47.2”/1200mm7.9”/200mm23.6”/600mm19.7”/500mm22”/560mm37”/940mm51.6”/1310mm4.9”/125mm5.1”/130mm0.9”/23mm110lbs/50kg

838-4341880lbs/400kg33.5”/850mm7.9”/200mm25.6”/650mm21.7”/550mm23.2”/59040.8”/1037mm37.8”/960mm5.9”/150mm5.9”/150mm1.2”/30mm145lbs/66kg

838-4342880lbs/400kg47.2”/1200mm7.9”/200mm25.6”/650mm21.7”/550mm23.2”/59040.8”/1037mm51.6”/1310mm5.9”/150mm5.9”/150mm1.8”/45mm156lbs/71kg

PlaPlaPlaPlaPlatftftftftforororororm Stacm Stacm Stacm Stacm Stackkkkkererererersssss

Platform Stackers


American Style

American styleOrder No.CapacityTable Size LxW

Min./Max. Table Height

Handle Height H3Wheel Base DOverall Size BxC

Wheel DiameterFoot Pedal to Max. HeightNet Weight

837-1300600lbs/300kgs29.1x19.3”(740x500mm)18.3x39.4”(465/1000mm)43.3”/1100mm26.2”/665mm22.8x39.4”(580x1000mm)4.9”/125mm0.6”/16mm198lbs/90kgs

837-15001100lbs/500kgs35.6x24.4”(905x620mm)19.3/44.5”(490/1130mm)43.3”/1100mm30.7”/780mm680x1100”(26.8x43.3mm)4.9”/125mm1”/25mm339lbs/154kgs

Simplifies Parts HandlingThe new Lift & Tilt Table are specifically designed to allow an operator to feedand unload parts from tote boxes or containers quickly and easily withoutlifting, bending, stretching, or reaching.When in its lift and tilt position, the unit holds totes or containers at a comfort-able working height and angle that allows operators to easily reach parts evenat the bottom of the container.The working table is elevated by means of a foot actuated hydraulic cylinder.As the table is raised, it automatically tilts to an angle of 45°at full elevation.Built-in retaining lip keeps containers in place.

European StyleOrder No.Capacity(lbs/kg)Table Size LxWTable Height of Front H1Table Height of Rear H2Handle Height H3Wheel DiameterOverall Size BxCFoot Pedal toMax. HeightNet Weight (lbs/kg)

837-1040880/40032.7x20.5”/830x520mm17/39”(435/990mm)17.1/39”(435/1550mm)44.5”/1130mm5.9”/150mm20.5x53.3”/520x1355mm2”/50mm271/123

837-10801760/80032.7x20.5”/830x520mm17.3/39.4”(440/1000mm)17.3/61.4”(440/1560mm)44.5”/1130mm5.9”/150mm20.5x53.3”/520x1355mm2.7”/68mm319/145

European Style

American Style

American StyleOrder No.Capacity (lbs/kg)Table Size LxWTable Height of Front H1Table Height of Rear H2Handle Height H3Wheel Base DOverall Size BxCWheel DiameterFoot Pedal to Max. HeightNet Weight (lbs/kg)

837-1280616/28036.2x24.2’’/920x615mm14.6/36.6’’(370/930mm)14.6/60.2’’(370/1528mm)43.3’’/1100mm30.7’’/780mm24.2x43.3’’/615x1100mm4.9’’/125mm0.9’’/23mm275/125

Lift Lift Lift Lift Lift TTTTTaaaaabbbbbleslesleslesles

Lift & Tilt Tables

837-1182400/18229.7x19.7’’/755x500mm12.8/31.5’’(325/800mm)12.8/49.6”(325/1260mm)43.3”/1100mm26.2”/665mm19.7x39.4’’/500x1000mm4.9’’/125mm0.6’’/15mm78/81

Much easier for loading and unloading operations by means of ball transfer unit.As the steel balls are raised, the goods on table are very easy to move into ormove away. As the steel balls are lowered, the goods stay on table firmly.

European Style

European styleOrder No.CapacityTable Size LxW

Min./Max. Table Height

Handle Height H3Wheel DiameterOverall Size BxC

Foot Pedal to Max. HeightNet Weight

837-1450990lbs/450kgs39.6x21.7”(1006x550mm)24.4/46.9”(620/1190mm)44.5”/1130mm5.9”/150mm22.8x46.7”(580x1185mm)1.7”/44mm153kgs

837-17001540lbs/700kgs39.6x21.7”(1006x550mm)24.5x46.9”(622x1190mm)44.5”/11305.9”/15022.8x46.7”(580x1260mm)2.2”/55mm155kgs

837-20002200lbs/1000kgs39.6x21.7”(1006x550mm)24.8x45.3”(630x1150mm)44.5”/11305.9”/15022.8x46.7”(580x1260mm)3”/75mm172kgs

Transfer Lift Tables


Order No.CapacityPlatform Size

Platform Extened

Castor/Wheel Dia.Overall Size

Net Weight

839-0150264lbs/150kgs19.7x16.5”(500x420mm)27.9x16.5”(710x420mm)3.9”/100mm27.9x16.5x37.4”(710x420x950mm)16.1Ibs/7.3kgs

839-0151264lbs/150kgs19.7x16.5”(500x420mm)27.9x16.5”(710x420mm)3.9”/100mm27.9x16.5x37.6”(710x420x955mm)17.4Ibs/7.9kgs

Aluminium Platform Trucks

Light weight Aluminiumdeck. Wrap around corner bumer.

Order No.CapacityPlatform Size

Castor/Wheel Dia.Overall Size

Net Weight

839-0153264lbs/150kgs29.5x18.5”(750x470mm)3.9”/100mm27.9x16.5x37.4”(750x470x980mm)36.4Ibs/8kgs

Stainless Platform Trolley A range of heavy duty, general purpose trolleys. All stainless steel construction. Shelf surface area, L x W: 840x535mm. 125mm Diameter heavy suty castors which are non-marking, non-staining. Finish: Grade 304 stainless steel.

Order No. 839-0202 Order No. 839-0203

Aluminium Hand Trucks

Order No.Capacity (Ibs/kg)Nose Plate (LxW)Wheel DiameterNet Weight (Ibs/kg)

839-0160660/300355x190mmSemi-pneumatic,26.8/12.2

839-0161660/300355x190mm10”/250mm26.8/12.2

Order No. 839-0160 Order No. 839-0161

Order No.Capacity (kg)Foot Plate(WxD)Handle Height(mm)Wheel DiameterOverall Size(Folded)Overall Size(Extended)Net Weight (kg)

Transport839-0210100486x2801080175490x60x820490x450x10805

Folding839-022090350x4101100150200x400x750410x400x11006

Order No. 839-0210 Order No. 839-0220

TTTTTrrrrrucucucucucksksksksks

Transport Trolley & Folding Trucks

Light, easy to transport and store. Aluminium construction with telescopic fold-down handle. PVC corner edging. 2 swivel castors and 2 fixed castors.

Order No.CapacityPlatform Size LxB

Handle Height HCastor/Wheel Dia.

Net Weight

839-0202220lbs/100kgs24.0x16.1”(610x410mm)35.4”/900mm3.9x1.2”100x3015.1Ibs/6.85kgs

839-0203220lbs/100kgs24.0x16.1”(610x410mm)35.4”/900mm3.9x1.2”100x3018.6Ibs/8.45kgs

Toolholder Cart Keep tools organized and helps protect from damage. Heavy gage steel, red baked epoxy finish. Angled tray for quick access from either side. Interlocking side panels for added strength. Nylon inserts reduce damage. Load rated at 1000lbs. Dimension: 35-1/4 long x18 wide x35” high

Tool StyleBT,CAT “V” Flange, NMTB for 40 TaperBT,CAT “V” Flange, NMTB for 50 Taper

Order No.839-0246839-0247

Tool Cap.48 Pcs36 Pcs

Weight75 lbs75 lbs


CarCarCarCarCarts & Carbinetsts & Carbinetsts & Carbinetsts & Carbinetsts & Carbinets

3-Drawer Work Center

Order No.Total Capacity (kg)Drawer Capacity (kg)Clapbord Capacity (kg)Drawer SizeOveral SizeWeel DiameterNet Weight (kg)

839-02301501015580x300x45mm950x410x870mm3”26

Include three dividable with two shelves. Use as a cart or mobile repair station. High quality, smooth extension drawers

extend 95% and have 22 Ibs. load capacity per drawer. Each mobile cabinet includes two

swivel casters with locks and two rigid casters. Indivedual srawer latches keep drawer

shut when moving

Chromed Cart

Overall Dimension: 760x410x900mmCaster: 4”(Dia 100x30mm)Load Capacity: 160kgsNet Weight: 16kgs

Overall Dimension: 760x410x900mmCaster: 4”(Dia 100x30mm)Load Capacity: 160kgsNet Weight: 21kgs

Overall Dimension: 760x410x900mmCaster: 4”(Dia 100x30mm)Load Capacity: 160kgsNet Weight: 23kgsTray Dimension: 760x410x77mmDraw Dimension: 702x385x88mm

Overall Dimension: 760x410x900mmCaster: 4”(Dia 100x30mm)Load Capacity: 160kgsNet Weight: 34kgsTray Dimension: 760x410x77mmDraw Dimension: 588x390x75mm, 588x390x99mm

Tool Chest & CabinetOverall Dimension: 660x308x253mmDraw Dimension: 2pcs: 570x272x50mm; 1pc: 570x272x75mmNet Weight: 15kgs

Overall Dimension: 660x308x320mmDraw Dimension: 2pcs: 570x272x50mm; 1pc: 570x272x75mmNet Weight: 21kgs

Overall Dimension: 660x308x380mmDraw Dimension: 3pcs: 174x272x50mm; 2pcs: 570x272x50mm; 1pc: 570x272x75mmNet Weight: 26kgs

Overall Dimension: 670x460x655mmDraw Dimension: 3pcs: 574x398x75mm; 2pcs: 574x398x153mmCaster: 5” (Dia 126x32mm)Load Capacity: 400kgsNet Weight: 47kgs

Overall Dimension: 670x460x810mmDraw Dimension: 5pcs: 574x398x75mm; 2pcs: 574x398x153mmCaster: 5” (Dia 126x32mm)Load Capacity: 400kgsNet Weight: 60kgs

Order No. 839-0240 Order No. 839-0241

Order No. 839-0242 Order No. 839-0243

Order No. 839-0301

Order No. 839-0302

Order No. 839-0303

Order No. 839-0304

Order No. 839-0305

Order No.Max. Cap.(kg/Lbs)Platform Size(mm)Upper platform heightHeight between 2 floorsLower platform heightCaster WheelNet Weight (kg)

839-0245250/550950x650x110850300150Dia.125x2627.5

Utility CartsHeavy duty plastic construction resists dents, chips and rust

839-0244250/550950x650x110850500150Dia.125x2620.5


Heavy duty and compact design to meet all pertinent world standard. Reliable disc brake and premium grade alloy load chain. Drop-forged and expertly heat treated for great strength and long wearing.

Order No.Capacity (Ton)Standard Lift(foot/m)Testing Load (KN)Effort Force to Max.Load (N)Load Chain Diameter (inch/mm)No. of Columns of Load ChainDimension a (inch/mm)Dimension b (inch/mm)Dimension c (inch/mm)Net Weight (lbs/kg)Extra Weight per Meterof Extra Lift (kg)

838-84010.58.2/2.56.32310.2”/615.2”/1315”/12710.6”/27022/100.9

838-840218.2/2.512.53090.2”/615.5”/1406.2”/15812.5”/31726/121.7

838-84031.58.2/2.518.83200.3”/816.3”/1617.4”/18715.7”/39944/202.3

838-840429.8/3253530.3”/816.3”/1613.4/0.7”(87/17)16.3”/41453/48(24/22)2.3

838-840539.8/337.5275.50.3”/826.3”/1618.3”/21018.3”/46570/323.7

838-840659.8/3754140.4”/1027.3”/18610”/25325”/636101/465.6

838-8407109.8/31254140.4”/10414.5”/3687.5”/19131.4”/798209/959.7

838-8408209.8/32508280.4”/10825.6”/6508.5”/21535”/890425/19319.40

Manual HoistsManual HoistsManual HoistsManual HoistsManual Hoists

Manual Hoists

Order No.Rated Capacity (Ton)Lifting Height (foot/Meter)Testing Load (Ton)Min. Distance Between Hook H (inch/mm)Pull on Lever to Lift Capacity (kg.f)No. of Load Chain FallsDiameter of Load Chain (inch/mm)Length of Lever(inch/mm)Dimensions(inch/mm)

Packing Size (LxHxW) (cm)Net Weight (lbs/kg)Gross Weight (lbs/kg)Extra Weight per Extra Meter (lbs/kg)

838-80750.754.9/1.51.12512.6”/ 3202110.2”/ 611”/ 2806.1”/ 1563.7”/ 945.2”/ 1321.5”/ 380.8”/ 2142x22x1917/ 7.518/ 84/ 1.7

838-810014.9/1.51.512.6”/ 3202310.2”/ 611”/ 2806.1”/ 1563.7”/ 945.2”/ 1321.5”/ 380.8”/ 2142x22x1918/ 819/ 8.54/ 1.7

838-81501.54.9/1.52.2514.1”/ 3602410.3”/ 816”/ 4106.9”/ 1764”/ 1036.4”/ 1621.7”/ 421”/ 2657x24x2124/ 1125/ 11.55/ 2.3

838-820024.9/1.5314.4”/ 3653010.3”/ 816”/ 4106.9”/ 1764”/ 1036.4”/ 1621.8”/ 451.1”/ 2857x24x2125/ 11.526/ 125/ 2.3

838-830034.9/1.54.518.5”/ 4703210.4”/ 1016”/ 4108”/ 2024.4”/ 1127.3”/ 1852”/ 501.3”/ 3263x27x2353/ 2455/ 256/ 2.7

838-860064.9/1.57.522.2”/ 5653420.4”/ 1016”/ 4108”/ 2024.4”/ 1129.1”/ 2302.6”/ 651.7”/ 4263x27x2359/ 2762/ 2812/ 5.3

Unique technology of spring clutch system, holding load at any desired height. Light hand pull and high efficiency. Upper and lower swivel hooks are drop forged and designed to bend slowly to warn of overload. Reinforced gear cover protects pivotal gear block.

Lever Blocks

DABC

E

Cautions Do not exceed working load limit. make sure that the end stop is connected to the chain. Keep the load chain lubricated at all times. Before oprating, inspect the load chain for damages. Before oprating, inspect the upper and lower swivel hooks for sings of

deformations and check that the safety latches are attached. Do not lengthen the handle with a pipe in order to exercise greater force.


Order No.Rated Load (lbs/kg)Flange Width(inch) (mm)Max.A (inch/mm)Min.B (inch/mm)Max.B (inch/mm)C (inch/mm)D (inch/mm)E (inch/mm)Max.F (inch/mm)Min.F (inch/mm)Min.G (inch/mm)H (inch/mm)Net Weight (lbs/kg)Gross Weight (lbs/kg)Packing Size (inch) (mm)

838-87112200/ 10003-8.7”75-22010.2”/ 2607.1”/ 18014.2”/ 3602.5”/ 640.2”/ 58.5”/ 2156.1”/ 1554”/ 1021”/ 250.9”/ 2210/ 4.512/ 5.516.9x3.7x6.7”430x95x170

838-87124400/ 20003-8.7”75-22010.2”/ 2607.1”/ 18014.2”/3602.9”/ 740.24”/ 68.5”/ 2156.1”/ 1554”/ 1021”/ 250.9”/ 2211/ 513/ 616.9x3.7x6.7”430x95x170

838-87136600/ 30003.1-12.6”80-32013.9”/ 3549.3”/ 23519.3”/4904.1”/ 1030.3”/ 810.2”/ 2608.9”/ 2255.5”/ 1401.8”/ 450.94”/ 2423/ 10.525/ 11.515.2x5.3x13.2”385x135x335

838-871511000/ 50003.1-12.6”80-32013.9”/ 3549.3”/ 23519.3”/4904.3”/1100.4”/ 1010.2”/ 2608.9”/ 2255.5”/ 1401.8”/ 451.1”/ 2824/ 1126/ 1215.2x5.3x13.2”385x135x335

Conforms to ANSI/ASME safety standard. Capacity 1to 5 ton. Clamp jaw is designed to reduce flange stress by

distributing load away from I-beam flange edge.

TTTTTrrrrrolleolleolleolleolley & Beam Clampy & Beam Clampy & Beam Clampy & Beam Clampy & Beam Clamp

Beam Clamps

Can be mounted easily with threaded handle. Fits a wide range of flange widths and beams. Suspension bar provides lower headroom.

Capacity(Ton)0.5

1

2

3

5

10

20

BeamFlangeWidth(inch)(mm)2.5-5.5”64-1402.5-6”64-1523-6.5”76-1653-8”76-2033.5-8”88-2034.9-8”125-2035.7-8”144-203

O5”1285.6”1436.8”1728.3”21210” 25412.6”32015.2”385

A0.9”221”251.1”271.2”311.4”361.8”462.7”68

B0.9”241.2”301.4”361.7”421.9”482.4”602.4”60

C9.1”23010”25411.6”29413.5”34414.2”36015.9”40318.7”475

D8.3”21210”25511.9”30213.5”34414.9”37817.5”44525.3”642

E2.3”583”753.5”904.3”1104.8”1225.9”1517.9”200

F3.2”824”1024.8”1225.6”1426.1”1567.4”18810.8”274

G4”1024.6”1185.4”1376.2”1576.8”1727.9”20011.8”300

H1.1”281”251.1”271.3”321.33”341.4”35a2.2”55

T1.7”442”502.4”603.1”783.5”903.7”943.7”94

R0.2”60.3”80.4”100.5”120.6”161”251.2”30

S3.7”954.6”1185.7”1457.1”1808.7”22011.2”28511.9”302

L0.6”150.6”150.8”201”261.4”351.8”452.8”70

X0.5”120.5”13.50.6”160.6”160.7”170.71”181.5”37

P1”261.1”281.3”341.5”381.7”441.9”482.4”60

N0.4”100.5”120.6”140.62”160.8”201”251.4”35

U0.9”241.2”30.51.4”361.8”452.4”603.2”824.3”110

PlainTrolleyOrder No.838-8705

838-8710

838-8720

838-8730

838-8750

838-8800

I4.5”113.54.4”112.54.4”112.55.3”1355.35”1366.3”1606”151.5

GearedTrolleyOrder No.838-8805

838-8810

838-8820

838-8830

838-8850

838-8910

838-8920

Conforms to ANSI/ASME safety standard. Double sealed ball bearings. Built in bumper guards. Adjustable to fit various sizes of flange and I-beams. Use on straight or curved track. Can be installed or removed at any point along the track.

Specifications(inch)(mm)

Plain & Geared Trolleies


Order No.W.W.L.(Vertical)Hand Effort (Max.)Lever Length CWire Roper DiameterDistance per StrokeWire Roper LengthWeight without RopeOverall Dimensions(LxB1xH)Packing Size(10pcs)Packing Weight (10pcs)

May be used in any position to lift, pull, lower or stretch heavy loads. Operated manually by engaging clutch and working the handle. Components are made of high quality alloyed steel. Aluminum alloy housing makes grip pullers light

in weight and quite portable Safety latches are standard.

837-50081760lbs/800kg62lbs/28kg29”/740mm0.3”/8.3mm2”/52mm0.8”/20mm13lbs/6kg17x2.6x10”428x65x260mm87x53x43mm209lbs/95kg

837-50163520lbs/1600kg90lbs/41kg44.1”/1120mm0.4”/11mm2.2”/55mm0.8”/20mm26lbs/12kg21.5x3.8x10.2”545x97x260mm96x64x58mm235lbs/107kg

837-50327040lbs/3200kg97lbs/44kg44.1”/1120mm0.6”/16mm1.1”/28mm0.8”/20mm26lbs/12kg26x4.6x12.6”660x116x320mm105x77x60mm594lbs/270kg

Powerful, reliable, lightweight wire roper puller. Ideal for on the spot jobs. Hooks complete with safety latches. Non-slip plastic grip. Galvanized wire rope. 1 piece Alu-alloy ratched wheel. Electro-plated steel frame.

W.L.L.Vertical(lbs/kg)1100/5001100/502200/10002200/1000

W.L.L.Horizontal(lbs/kg)2200/10002200/10004400/20004400/2000

Max. PullingLength(foot/m)7.2/2.27.2/2.26.3/2.856.3/2.85

RatchedWheelSingleDoubleSingleDouble

CableDiameter(inch/mm)0.2/50.2/50.23/60.23/6

NetWeight(lbs/kg)5/2.35.3/2.426.2/2.86.4/2.9

Packing Size/Qty(cm)/PCS58x24x34/10pcs58x24x34/10pcs71x29.5x31.5/6pcs71x29.5x31.5/6pcs

Order No.837-5150837-5151837-5200837-5201

Capacity(Ton)1

2

3

5

JawOpening(inch/mm)0-0.8”0-200-1.2”0-300-1.4”0-350-2”0-50

A0.9”231.4”351.6”40 2”50

B1.4”361.8”452”502”50

C4.9”1246”1536.9”1758.6”218

D0.2”52.4 602.4”602.6”65

E0.9”241.2”301.4”351.8”45

F8.9-10.4”225-26510-12”253-30511.7-13.9”296-35315-17.3”380-440

G1.3”331.6”401.8”452.2”57

H6.1”1557.6”1948.9”22610.2”260

I2”512.3”602.7”683”76

NetWeight(lbs/Kg)83.6136.0209.33717

GrossWeigh(lbs/Kg)94.3156.82310.34018

PackingSize(inch/mm)11.6x2.4x5.7”295x60x14513.6x3.1x7”345x80x18015.9x3.5x7.7”405x90x19517.5x4.5x9.8”445x115x250

Order No.838-8721

838-8722

838-8723

838-8725

Conforms to ANSI/ASME safety standard. Plate lifting clamps for safe handling of plates in vertical position and

turning 180 degree. Fitted with standard hoisting eye, moving in one direction. With safety-lock to provide initial pressure at near zero grip. For lifting steel plates with a surface hardness up to 37 RC (345HB)

J0.6”140.62”160.7”190.9”22

(Unit: inch/mm)

Rope PullersRope PullersRope PullersRope PullersRope Pullers

Plate Lifting Clamps

Grip Pullers

Wire Roper Pullers


Mini-electric hoists are designed with latest European technology, they are suitable for lifting or unloading goods in shops, restaurants,industry assembly lines and food industry. It is also a useful tool to lifting materials and different goods in house or apartment.

Use of HookSingle HookDouble HookSingle HookDouble HookSingle HookDouble HookSingle HookDouble HookSingle HookDouble Hook

RatedVoltage(V)110/220110/220110/220110/220110/220110/220110/220110/220110/220110/220

InputPower(W)500500650650100010001150115013001300

LiftingCapacity(lbs/kg)220/100440/200275/125550/250440/200880/400550/2501100/500600/3001320/600

LiftingSpeed(foot/M per min)32.8/1016.4/532.8/1016.4/532.8/1016.4/532.8/1016.4/532.8/1016.4/5

LiftingHeight(foot/M)39.4/1219.7/639.4/129.7/639.4/129.7/639.4/129.7/639.4/129.7/6

Packing Size(cm/2pcs)37x30x2437x30x2437x30x2437x30x2442x32x2742x32x2742x32x2742x32x2742x32x2742x32x27

G.W/N.W.(kg/2pcs)24/2224/2225/2325/2335/3335/3336/3436/3437/3537/35

Order No.838-8500838-8501838-8502838-8503838-8504838-8505838-8506838-8507838-8508838-8509

Max.Capacity(lbs/kg)550/2501320/600

Max .Length(inch/mm)43.3/110029.5/750

Packing Size(cm)86x22x2086x22x20

G.W./N.W.(kg)32/3024/22

Order No.838-8525838-8560

Electric HoistsElectric HoistsElectric HoistsElectric HoistsElectric Hoists

Mini-Electric Hoists

Rotary Hoist Frames

Single Hook Double Hook


Capacity(Ton)5.010.025.0

LiftingRangeof Foot(inch/mm)1-8”/ 25-2061-9.1”/ 25-2332.3-9.1”/ 58-233

LiftingRangeof Head(inch/mm)14.4-22.4”/ 368-57416.1-25.2”/ 413-64616.7-28.9”/ 505-740

Max.LeverForce(lbs/kg)84/3888/4088/40

NetWeight(lbs/kg)44/2062/28203/92

Order No.838-6205838-6210838-6225

CautionsTO AVOID POSSIBLE PERSONAL INJURY OR DAMAGE TO EQUIPMENT.

JacksJacksJacksJacksJacks

Hydraulic JacksHydraulic Jack is designed for repairs, maintenance and installation of heavy machines Compact and stable construction. Can be used in any position. Very low foot measuring only 25mm. Housing revolves 360 degrees.

Do not exceed the maximum load capacity of the jack. Do not add additional load to a lifted load. Do not use in unstable or hazardous positions. unit must be used on flat surfaces able to carry the load. The load must be stable during lifting (an unstable load may

cause the jack or load to slip). Do not use jack(s), if damaged, altered, or in poor condition. Do not lift people or loads with people on them. Do not lift at the end of the toe, fully engage the losd with

the toe.

Lowering speed can be accurately adjusted. Protected against overloading. Pump Lever is removable. According to US standard USA ASME/ANSI B 30.1.1986.

Conforms to ANSI/ASME safety standard

Order No.838-6416838-6420838-6421838-6432838-6440838-6450838-6480838-6500838-6520838-6525838-6560838-6561838-6600838-6601838-6650838-6700838-6701838-6900838-6901

Capacity(Ton)1.6223.2458101212.5161620202530305050

Min.Height(inch/mm)6.2/1584.7/1206.7/1707.7/1956.1/1567.8/1977.9/2008.5/2177.5/1908.9/2277.5/1909.5/2427.5/1909.6/2457.9/2007.9/20011.2/2859.4/24011.8/300

LiftingHeight(inch/mm)3.5/908.1/2057.9/2004.9/1256.5/1654.9/1254.9/1254.9/1253.9/1005.3/1353.7/955.7/1453.5/885.7/1453.9/983.9/987.1/1804.4/1127.1/180

AdjustingHeight(inch/mm)2.4/60

2.4/602.4/601.6/403.1/802.8/702.8/702.4/603.1/802.3/582.8/702.3/582.8/70

Base Plate(LxW) (mm)94x97113x150102x107103x109110x115109x116130x120135x122132x134148x136136x143158x145156x167156x167122x164152x190152x190176x218176x218

N.W.(lbs/kg)6/2.512/5.48/3.58/3.79/4.211/514/6.517/7.515/6.721/9.518/8.125/11.523/10.328/12.533/14.837/1751/2359/2775/34

G.W.(lbs/kg)6/2.914/6.39.2/4.29/4.111/5.112/5.615/718/817/7.622/1020/927/12.325/11.229/13.335/1640/18.253/2463/28.577/35

Packing Size(LxXxH)(mm)35.5x21x2152x18x1661x14x2441.5x25x2361x14x2448x15x2358x16.5x2658x16.5x2658x16x2532x18x2762x17x2536x18x2736x18x22.536x18x2738x19.5x2420x20.5x22.520.5x20x3024x22x2724x22x32

QuantitiesPcs/Pack6456544442422221111

Quantities20’ Container620428564285438635253212256822482368180020001462160613521124988750630514

Order No.838-6421

Order No.838-6440

Order No.838-6420

Order No.838-6600

Order No.838-6560

Order No.838-6520

Order No.838-6432

Order No.838-6500

Order No.838-6561

Order No.838-6701

Hydraulic Bottle Jacks


Capacity(lbs/kg)4400/20004400/20004950/22506600/30004950/22505500/25006600/3000

Min.Height(inch/mm)5.3”/1355.3”/1355.3”/1355.3”/1355.3”/1355.3”/1355.3”/135

Max.Height(inch/mm)15.2/38513.5/34215.2/38515.4/39219.3/49019.3/49019.3/490

LiftingHeight(inch/mm)9.8/2508.1/2079.8/25010/25714/35514/35514/355

SafetyStandardCE/GSCE/GSANSI/ASMECE/GSCE/GSCE/GSCE/GS

NetWeight(lbs/kg)26/1221/9.529/1342/1975/3475/3479/36

ApplicationLight DutyLight DutyLight DutyLight DutyHeavy DutyHeavy DutyHeavy Duty

Gross WeightwithColor Box(lbs/kg)29/1323/10.531/1446/2179/3679/3684/38

WithColorBoxOrder No.838-9201838-9202838-9231838-9301838-9232838-9250838-9300

Gross WeightwithPlastic Case(lbs/kg)31/1424/1133/15

WithPlasticCaseOrder No.838-9203838-9204838-9233

Net Weight……………….45kgGross Weight…………….47kgOverall Dimensions …….680x210x415mmPacking Dimensions…….700x240x340mm

High Position5000kg/11000lbs414mm/16.3”724mm28.5” Order No. 838-6150

Manufactured to conform the CE and ANSI/ASME safety standard. Upper lifting limit safety bypass. Rugged steel structure

Quick Lifting Forklift Jack

Low Position4000kg/8800lbs65mm/2.6”425mm/16.7”

CapacityMin. Lifting HeightMax. Lifting Height

SafeWorkingLoad(lbs/kg)6600/ 300011000/ 500022000/ 10000

Height ofJack Body(inch/mm)28.1”/ 72028.1”/ 72030.1”/ 792

LiftingHeight(inch/mm)13.7”/ 35011.7”/ 30011.7”/ 300

Heightof Claw inLowest Position(inch/mm)2.7”/ 692.5”/ 643.3”/ 85

NetWeight(lbs/kg)55/ 2566/ 3084/ 48

Order No.838-7032838-7052838-7102

Suitable for lifting loads of any type. For a variety of lifting points. Low expenditure of force through optimal ratio. Lifting claw adjustable in 6 positions. Lift completely usable. Large base plate.

Capacity3 ton5 ton10 ton

Position 621.8”/ 554mm21.6”/ 549mm24.2”/ 615mm

Position 518”/ 457mm17.8”/ 452mm20”/ 509mm

Position 414.2”/ 360mm14”/ 355mm15.9”/ 403mm

Position 310.4”/ 263mm10.2”/ 258mm11.7”/ 297mm

Position 26.5”/ 166mm6.3”/ 161mm7.5”/ 191mm

Position 12.7”/ 69mm2.5”/ 64mm3.3”/ 85mm


With Adjustable Lifting Claw

Suitable for lifting loads of any type. With lifting body. Safety crank with folding handle. Lifting either with fixed toe or on clawed head. All construction components standardized. Low expenditure of force through optimal ratio.

DIN 7355 Type SafeWorkingLoad(lbs/kg)3300/15006600/300011000/500022000/1000033000/1500044000/20000

HeightofJack Body(inch/mm)28.3”/ 72528.3”/ 72528.3”/ 72531.2”/ 80031.2”/ 80031.2”/ 800

LiftingHeight(inch/mm)13.7”/ 35013.7”/ 35011.7”/ 30011.7”/ 30013.3”/ 34013.3”/ 340

Heightof Claw inLowest Position(inch/mm)2.7”/ 702.9”/ 752.7”/ 703.5”/ 903.7”/ 953.7”/ 95

NetWeight(lbs/kg)26/ 1244/ 2053/ 2492/ 42128/ 58139/ 63

Order No.838-7015838-7030838-7050838-7100838-7150838-7200

Steel Jacks

Low Body Height TypeSafeWorkingLoad(lbs/kg)3300/ 15006600/ 300011000/ 500022000/ 10000

HeightofJack Body(inch/mm)22.2”/ 57022.2”/ 57023.4”/ 60025.4”/ 650

LiftingHeight(inch/mm)11.7”/ 30011.7”/ 30011.7”/ 30011.7”/ 300

Heightof Claw inLowest Position(inch/mm)2.7”/ 702.9”/ 752.7”/ 703.1”/ 80

NetWeight(lbs/kg)24/ 1140/ 1848/ 2284/ 38

Order No.838-7014838-7031838-7051838-7101

Floor Jacks


High capacity and rugged construction. Extra low pick up point and 2-position lift pad for

hard-to reach places under low profile lift trucks. Special designed hydraulic pump with Germany

seal kits and overload valve. Removable handle and compact size. Meets CE standard and ANSI standard.

Order No.CapacityMin. Lifting HeightMax. Lifting HeightWidthNet WeightGross WeightPacking Size

838-61404000kg/8800lbs60mm/2-1/3”406mm/16”203mm/8”33kg/72.6lbs35kg/77lbs740x240x480mm29.1x9.5x18.9”

838-61707000kg/15400lbs67mm/2.68”425mm/16.70”250mm/9.83”49kg/107.80lbs53kg/116.60lbs845x275x715mm33.3x10.9x28.1”


Order No.Capacity (kg)Max. Height (mm)Min. Height (mm)Lifting Height (mm)Net Weight (kg)Gross Weight (kg)Packing Size (mm)Quantity in 20’ Container

838-6320200080014066058651250x470x210220

838-6330300060013047070901460x370x300160

838-63505000560150410951151570x420x30128

838-6400100005601604001451701700x530x34098

Long Frame Floor Jacks Heavy duty design and better performance. Top quality hydraulic system with Japanese seal kits. Confirm to CE/GS and ANSI/ASME safety standard.

Order No. 838-6113 Order No. 838-6118

Provide to support forklifts and heavy machinery. Heavy duty design and wide base. Heat treated Heavy duty holding pins. Adjustable from 242mm(9-1/2”)to 406mm(16”). Sold in pairs.

Order No.Capacity(Ton)Min. Lifting HeightMax. Lifting Height

838-611313242mm/9-1/2”406mm/16”

838-611818242mm/9-1/2”406mm/16”

The weight of the load prevents the ratchet pawlfrom disengaging while under loadHeavy-duty, all steel, welded constructionSold in pairs only

Order No.Capacity (lbs/ton)Min. Height (mm)Max. Height (mm)Adjust Range (mm)Net Weight (kg)Gross Weight (kg)Packing Size (mm)

838-94024400/22784321544.85.4200X180X340

838-94036600/32864261406.57200X180X350

838-940613200/638861022213.114.1285X250X450

838-941226400/125007752753234340X390X565

Order No.838-9402

Order No.838-9412Order No.838-9406

Order No.838-9403

Jack Stands

Forklift Support Stands

Forklift Jacks


A “Must” for safely loading and unloading trailers!Meet OSHA Specification with our wide variety of Trailer Stabilizing Jacks OSHA 1910.

A. Spin-Top JackStatic capacity: 100,000lbs(45ton)Lifting capacity: 40,000lbs(18ton)Service range: 39-1/2”-51”ACME threaded screw designCap size: 8” diameterBase plate: 14” diameter x 1/2”thickWheels: heavy duty 10” semi-pneumatic transport wheelsNet weight: 125lbs(57kg)

B. Ratchet Beam JackStatic capacity: 100,000lbs(45ton)Lifting capacity: 50,000lbs(22.5ton)Service range: 39-1/2”-51”Beam size: 6” wide x 24” longBase plate: 15” triangularWheels: 8” semi-pneumatic; 4” semi-steelNet weight: 195lbs(88.63kg)

Static capacity: 50,000lbs(22.5ton)Lifting capacity: 5,000lbs(2.25ton)Height adjustment: 44-51”Top plate: 5x5”Base plate: 14” diameterNet weight: 45lbs(20.5kg)

Secures and helps keep load from shifting and falling in transit.Use between walls or floor and roof of van, truck, trailer or rail car.Push against load and expand to secure load. For the best results, use cargo bar in pairs.Cargo hoops are recommended for securing large areas, and attach easily to cargo bar.

A. One-Piece AluminumCargo Bar837-3001 is constructed of lightweight extrudedaluminum tubing that will not rust. Service rangeis 87 to 103”. Articulating footpads are located ateach end. Easy to operate locking handle securesbar into position.

B. Folding Steel Cargo Bar837-3002 consists of 1-1/2” square 14-gauge tubing forsubstantial strength. Easy-to-operate mechanical ratchet willnot slip or vibrate loose and works well in freezing and wetconditions. 4” square, rubber protected, articulating end padskeep bar in place. Adjusts from 87 to 115”. Two-piece hingedbar can be folded and stored in trailer cab to minimizepilferage.

C. Two-Piece Galvanized SteelTelescoping Cargo Bar837-3003 adjusts from 64 to 140”. Made of 1-1/2”square 14-gauge tubing. Galvanized steelconstruction is ideal for refrigeration trucks. 4”square rubber pads are vulcanized to metal endsfor a more secure fit and longer life. Articulatingpads allow angled mounting.

D. Steel Cargo Bar837-3004 steel cargo bar helps keep your cargo inplace without damaging walls. Adjusts from 82-1/2to 110” and features a heavy duty locking ratchetwith 3-3/4” square rubber footpads. One piece unitis constructed of 1-1/2”steel tube for substantialstrength.

The pallet pullers are used to pull loaded pallets, slide heavy crates, etc., to edge of dock or truck, so it can be picked up withforklift truck. Variable jaw width grabs pallet securely and automatically releases.Rugged steel construction. 2-3/4”high heads are self-cleaning and unaffected by wood particles, paint or grease. 1/4”proof coilchain included for attaching pull chain.

A. Scissor ActionOne-piece curved heads have integralspurs for gripping pallet stringers.Scissor action 30” long. 30” long chain.

B. Scissor ActionSingle scissor action allow for wider jawopening. Opens to 5-1/2”. Overall closedlength: 19-1/2”. 30”long chain.

C. Cam ActionCam closing action provides maximum grippingstrength and reduced pinch points. Safety handleenables easier positioning and removal of sepa-rated heads. Grip both metal and wood pallets withbiting action. 15-1/2”long. 7-1/2”long chain.

Order No.837-4001837-4002837-4003

Max. Palletweight5000 lbs5000 lbs5000 lbs

For stringersUp to 3”Up to 5-1/2”Up to 3-1/2”

Length30”19-1/2”15-1/2”

Net weight21 lbs12 lbs14 lbs

E. Cargo HoopsFor use with 837-3002, -3003 and -3004.837-3005 are constructed from galvanizedsteel and each measures 24” W x 36” L.Expand the retention area to secure a largearea of smaller boxes or cartons. Installationhardware is included.Sold in pairs.

Order No. 838-9501 Order No. 838-9502 Order No. 838-9503

Order No. 837-3001 Order No. 837-3004Order No. 837-3003

Order No. 837-3002 Order No. 837-3005

Order No. 837-4001

Order No. 837-4003

Order No. 837-4002

C. Economy TrailerStabilizing Jack

Jacks/Pallet PullersJacks/Pallet PullersJacks/Pallet PullersJacks/Pallet PullersJacks/Pallet Pullers

Trailers Stabilizer Jacks

Pallet Pullers

Cargo Bars and Hoops


Raises, transports, rotates, tilts and drains fully loaded drums. High strength lifting components, secured

by high strength, wear resistant chain. 55gallon(210 liters), 22-1/2”(572mm)

diameter. Net weight 110lbs(50kg). Disassembled to save freight costs.

Easily lift, transports, raise, tilts and load drums. 10’ pull-chain loop allows control from the driver’s seat. Net weight 170lbs(77kg). Full capacity: 800lbs(364kg),

Half full capacity 500lbs(227kg) Drum size: 22-1/2”(572.18mm)diameter,

55gallon(210liters).

Order No. 837-0011

Order No. 837-0017

Fork Mounted Automatically!Easily and quickly lift drums without hydraulic or electric connections. Simplyslip onto forks and screws. Heavy duty steel construction. Lifts, transportsand deposits drums without leaving the driving position. Firm pressure isautomatically applied by action of the loaded drum is firmly maintained in thesame position until deposited, it is then automatically released.

838-0015551500 lbs5-1/2x2x22”143 lbs

838-0017551500 lbs7x2-1/4x26”230 lbs

Order No.Drum GallonCapacityFork PocketsNet Weight

Max. MagneticPower toRoundworkpiece110lbs/50kg

220lbs/100kg

330lbs/150kg

Order No.625-0210

625-0220

625-0230

Max. MagneticPower toFlatworkpiece220lbs/100kg

440lbs/200kg

660lbs/300kg

SizeA x B x C x D5”x2-2/5”x2-3/5”x5-1/2” (125x62x67X140mm)6”x3-3/5”x3-3/5”x6-7/10”(152X91X91X170mm)8”x3-3/5”x3-3/5”x6-7/10”(195X91X91X170mm)

Weight6.2lbs/2.8kg

15.4lbs/7kg

22lbs/10kg

Designed for efficent, trouble free, lowmaintenance service.

Order No. 625-0210 Order No. 625-0230

Magnetic Power: 400kgLength: 205mmWidth: 135mmHeight:180mmWeight:43kg

Order No. 625-0240

Magnetic Power: 50kgLength A : 120mmWidth B : 100mmHeight C : 270mmWeight: 3kg

Order No. 625-0005

DrDrDrDrDrum Carum Carum Carum Carum Carrierrierrierrierriers/Mas/Mas/Mas/Mas/Magnetic Liftsgnetic Liftsgnetic Liftsgnetic Liftsgnetic Lifts

Drum Grabs

Heavy Duty Permanent Magnetic Lift

Hand Use Magnetic Lift

Drum Lifter Easy moves and handles open or closed head, loaded steel durms.

Allows quick, gentle loading into overpacks and keepps srums upright during lift. Readucing spills and injurise. Works easily with overhead hoist or hook from forklift. All-steel construction.

Order No. 838-0035

Order No. 838-0036

Capacity: 350kgFor lifting 210 litre steel drum.Net Weight: 9.5kg

Welded gripping hooks. Fitted with 20mm diameter steel pin for

attaching to overhead hoist or crane.

Capacity: 360kgfor lifting 210 litre Steel Drum/plastic drum with L/X ringsNet Weight: 4.5kg

Drum Carrier

Forklift Drum Carrier

Permanent Magnetic Lifts


Precision Lever Press

Arbor Presses/Hand Punches/NotchersArbor Presses/Hand Punches/NotchersArbor Presses/Hand Punches/NotchersArbor Presses/Hand Punches/NotchersArbor Presses/Hand Punches/Notchers

It is easy to punch a hole in steel plate. Punch die is interchangeable. Max. Punching Capacity :

Steel Plate Thickness 8mm punch Dia. 20mm Steel Plate Thickness 10mm punch Dia. 16mm Throat Depth: 160mm.

Capacity( Ton)1/21235

Height of Press10”13”18”23”35”

Max.WorkDiameter6-1/2”8”12”12”17”

CapOver Table4-1/2”5-1/4”8-1/2”12-1/2”18”

Ram7-1/2”9-1/2”14”18”27”

Order No.805-1005805-1010805-1020805-1030805-1050

The punch is designed to use infamily, school, small factory.The spring could make the arborreach “0” position automatically.

LargestArbor1”1-1/8”1-5/8”1-3/4”2-7/8”

TypeStandardHeavy DutyStandardHeavy Duty

Order No.805-1205805-1206805-1207805-1208

ArborsRectangularRectangularRoundRou`nd

Arbor Presses Hand Punchers

Hand Notcher

Hand Puncher

Notch6x6x90°

Stroke3/4”

TableSize12x18"

Weight210lbs

BodyHeight18-1/2”

Order No.130-5101Stand Size: 22"x20x30", Weight: 90LbsOperation Stand

Capacity( Ton)235

Height of Press18-1/2”21-1/2”34-1/2”

Max.WorkDiameter11-7/8”12”17”

CapOver Table3-1/2”12-5/8”18-1/4”

Ram13-1/2”18”27-1/2”

Order No.805-1120805-1130805-1150

LargestArbor1-7/8”2-1/2”3”

Ratchet Type

Single Leverage

Lever arm allows you to easily change positions comfortably for maximum leverage. Convenient front and side gib adjustment. 4 Position anvil. Heavy duty construction for long lasting reliability. Steel pinions and rams.

Specification

Capacity16 Gage

Order No.130-5170130-5175

Tube Diameters27-43mm(1-1/16"-1-11/16")48-61mm(1-7/8"-2-13/32")

Tube Notchers Operated on tubes with up to 3 mm wall thickness which material

range from steel or non-ferrous metal. Advantage for joining and welding of tubes at a 90 degree angel. One device covers several tube diameters. Horizontal and vertical operation. Suitable for double-connections.

Order No. 130-5105

Ratcheting presses put lever arm in most comfortable position for final application of force. Counterweight assures quick return with

hand wheel advance. Hand wheel advances ram to work.

RoundRectangular

Heavy duty notcher cuts all shearable material with ease; steel, aluminum,plastic and rubber.

Order No. 130-5100

Hand Notcher4 Ton, capacity:16 Gauge

Speicification: Capacity: 5.125" Max Diameter: 4.125" Pressure: 1/2 ton Opening(ram to column):5"x2-1/16" Hole Size: 1/4"x 2pcs Base Size: 2.875"Wide x5.5" Long Height: 7.75" Weight: 14lbs

Speicification: Capacity: 5" Throat Depth: 6" Ram Dia: 5/8" Pressure: 1/4 ton Hole Size: 1/4" x 2pcs Base Size: 5" wide x 12" long Height: 7.625"

Deep Throat Lever Press

Order No. 805-1161

Order No. 805-1162

Includes 12” x 18” ground table with front gages.The gages offer a full 6 inches of surface allowing foreasy and accurate squaring. Reversible upper bladesfor both splay and pierce cutting.


Scroll Attachment Capacity 3/16x1/2 to 3/16x1”

mild flat steel. Order No. 130-5073

Includes these round dies: 1”, 1-1/4, 1-1/2, 1-3/4, 2”, 2-1/2, and 3”.Right angle attachment. Handles telescope to 44”.Capacities:Mild stee....................................... 5/16x1-1/4 or 1/4x2”Right angle bending....................3/16x1-1/4 or 1/4x1-1/4”Center point...................1/4” thick (use1” die for greater)Solid rod .............................................1/2” (use 3” die)

Bench Model Height: 8”, base: 8.6” x 8.6” Order No. 130-5071

Twister Attachment Capacity 1/2” pickets 36” long

in hot rolled, square mild steel. Handle 25” x 1-1/4”.

Height: 33”, base: 10” x 10” Order No. 130-5070

Compact Benders

Order No. 130-5072

Notches, copes, or saddles any pipe or tube up to 2” in diameter, round orsquare. Easy set-up for angles to 45°.

Shears/Cutters/BendersShears/Cutters/BendersShears/Cutters/BendersShears/Cutters/BendersShears/Cutters/Benders

Steel Tube & Pipe Notchers

BladeLength5"681012

Round3/8"3/87/167/167/16

Plates3/32"3/321/81/81/8

Order No.130-5785130-5786130-5788130-5790130-5792

Bench Metal Shears

Blade OnlyOrder No.130-5795130-5796130-5798130-5799130-5793

Capacity

Long handle provides plenty of shearing torque. Comes with pre-drilled holes to bolt down to workbench. Replacable blades made from high grade tool steel.

Order No. 130-5111Steel StructureAluminium StructureOrder No. 130-5110

Features: For cold forming of steel and metals. Including set-up plate for table clamping. Punch and die tools are available for tool bending. The Max. Bending force is 2.5 Ton. Min. Adjustment 2.5mm. Max. Bending capacity:

Round material up to 20mm, Square material up to 18mm Flat material: 20mm(width)x18mm(Thick) 50mm(width)x11mm(Thick) 100mm(wdth)x8mm(Thick)

Form Bender

Order No. 130-5125

Plate Cutter

Order No. 130-5713

For straight and round cutting of sheet metal. No power required.

Versatile Metal Cutting Machine, Multi-purpose

Metarial GageStainless Steel...................13Steel Plate.........................12Aluminum & Copper Plate......8

Specifications

For use on mild steel. 16gage capacity.Adjustable rollers can be used for straightor curved cuts.2”Throat. Can be mountedto work bench or held in a vise. 3”x2-1/2”Base with 2 mounting holes. 11”Handle.4-3/4” overall height (less handle)

Mini Sheet Metal Cutter

Order No. 130-5115

Hand Operated Wire CutterDesigned to achieve better surface finish andlower distortion on cutting different size wires.Feature characters of light weight, simpleconstruction for easy operation and freemaintenance. Cutting capacity can be extendedby change different cutters.Capacity: up to 1/4”/6mm Dia.

Order No. 130-5117

Uses all standard hole saws upto 3” with either a 1/2-20 or 5/8-18thread mount.1/2” diameter drive shaft for usewith any 1/2” capacity drill motor.Made of heavy plated chromesteel.

The pipe clamp has ablack oxide finish. 5-1/4x3mounting plate with 3-1/4”drilled holes. Weight 9lbs.Hole saw not included.


Bends pipe and tube from 1/2” to 2”diameters, up to 180°. Bending bars areadjustable to accommodate distances of8-1/2”, 11-1/4”, 12”, 19-1/2”, and 22-1/4”.Steel frame is 4” deep, 21” high and 24”wide. Includes 12 ton jack. Weighs 120lbs.

Hydraulic Bender

Order No. 130-5120

BendersBendersBendersBendersBenders

Up to 3x16mm,shear,bender,twistformer,screw former.

Up to 5x30mm,shear,bender,twistformer,screw former.

Order No. 130-5074Order No. 130-5075

Multipurpose Metal Craft Tool SetIncludes 4 kinds of tools: a punching and shearing tool,a bending androlling, a curving tool, and a screwing tool.It is convenient to make cuch things as stand of flowerpot, stand oftelephone, legs of table, stand of candle, door, window, handrail,bounding wall and so on.

Compact Benders

Hydraulic Bender

Make 90° bends in rigid steel and rigidaluminum 1/2 to 3” capacity, 10 tonoutput. Includes steel frame & pipesupports, cast iron shoes and ahydraulic unit. Positive lock pipesupport pins and one piece frame foreasy pipe insertion and removal fromfront. Shoes included for 1/2, 3/4, 1,1-1/4, 1-1/2, 2, 2-1/2, & 3” pipe sizes. Order No. 837-6310

OrderNo.130-5010

It is designed to cut steel bar, which diameter is not more than 3/4”, and could bend the rebar to 90° maximum, by adjusting the clamp arm. Base: 12-3/64”x6” Weight: 80lbs.

Knives Only

Rebar Cutter/Bender

Order No. 130-0020

For shops, schools, and hobbyists. Clean smooth bends up to 90°. Use for heating and cooling ducts.Production runs or one timefabrication

of boxes, covers and trays.

18"x16gaugeOrder No. 130-5018

Mighty Mini Benders

30"x18gaugeOrder No. 130-5030

18” bender could bend and form up to 16 Gauge thick sheet metal. Certain applications require a cut of 1” deep slot in brake bar. 30” bender handles up to 16 Gauge

aluminum & 18 Gauge steel.

Bend Roller Fence AttachnebtHelps you make accurate beads, bends and cuts.Weight: 3 Ibs.

Capacities: Mild steel........18 gauge Throat..............15”x7/8” Dimensions.........8”x28” Weight................60lbs

Bead Roller Kit

Order No. 130-5060

Cut,form, roll beads and make perfect flanges with one benchtop tool Perfect for auto body works-make your own wheel tubs, battery trays,

dash-boards, fire walls, floor pans and other sheet metal parts and accessories.

Order No. 130-5062

For angular, roll, hoop and coil bending to produce grids, doors, gates,balcony railings, patio furniture as well as rod iron lamps, Suitable forsteel, brass, copper, and aluminum.

Bending strendth:28.5 Tons per square inch.

Capacity(steel):Round Bar: 5/8”Square Bar: 1/2”Flat Bar: 1-3/16x5/16”

Order No. 130-5045

Universal Bender

Forms wire, flat metal and tubing into clamps, handles, brackets, hooks,coils and more!Makes sharp angle bends in wire and rod up to 5/16” diameter and in flatmetal to 1” x1/8”. Steel construction, weighs 6lbs. Fits into a tool box andmounts on a bench or vise. Includes circle pins for 3/16, 1/4, 1/2” diametercircles, 1” diameter circle die, form pin follower, sharp angle die, gage andhandle.Optional edge bender kit adds edgewise bending capability for ductilematerials to 0.12” thick and 3/4” wide. Optional circle dies form perfectcircles in various diameters.

Order No. 130-5040

Universal Bender


AxisX-axisX-axisX-axisY-axisY-axisY-axisZ-axisZ-axisFeed Horizontal typeFeed Horizontal type

Volt/Frequency115V/60Hz115V/60Hz240V/50Hz115V/60Hz115V/60Hz240V/50Hz115V/60Hz240V/50Hz115V/60Hz240V/50Hz

Torque135lbs150lbs135lbs135lbs150lbs135lbs150lbs135lbs150lbs135lbs

Order No.199-1050199-1051199-1049199-1052199-1053199-1054199-1055199-1056199-1057199-1058

Power Table Feeds135 or 150lbs /inch of torque for mills with 5/8 Lead Screw Fits most Bridgeport and Bridgeport type milling machines. Speed: 4-180 RPM. Bevel Drive Gear Rate 4:8:1, Pilot light. A pivot light, on/off switch. Protective circuit breaker. Travel stop/limit, Internal Clutch, Helical Gearing. Strengthened Nylon “spiral gear”. Automatic shutoff with electric limit switches. Central knob to control speed. Push button turns motor on for rapid traverse. Single lever controls engage, disengage,

start, stop and direction of feed. Safety limit switches.

This parts washer is design for use in shops ranging from the home mechanicgarage to heavy industry. Feature: encolsed pump, seamless construction.

Order No.199-1035199-1026199-1022199-1030199-1040199-1043

Capacity3.5 gallon (portable style)6gallon20 gallon30 gallon40 gallon50 gallon

Order No. 199-1022

Order No. 199-1035

Parts Washers

Precision, high quality machinedroller forms rings out of not rolledflat stock, Metal sizes 3/16”x1” andup to 1/4” roud, Create rings from3” diameter to as large as youneed. All surface are heat-treatedand hardened for long life.

Order No.130-1111

Gear Driven Ring Roller

Capacity

12”x22Ga.24”x20Ga.36”x22Ga.50”x16Ga.

Dia.ofRolls

1”2”2”3”

Weight

37lbs140lbs280lbs570lbs

Slip RollsOrder No.130-1222130-2420130-3622130-5016

Maximum gauge capacities are applicable when using mild steel. Using galvanized steel lowers the maximum gauge capacity.

Order No. 130-5016Order No. 130-3622

Slip Rolls

Optional StandsOrder No.130-1229130-2429130-3629130-5019

Product DescriptionCapacity....50" x 16 gage.Motor.............................220V/440V, 3-PH., 1HP.Roll speed.........22 RPM.Dia. of roll...............3".Min. radius..........1.5".

Power Roll

Order No.130-5116

Performs burring, edging, elbowing, flanging, flattening and turning. Long throat makes unit highly versatile. Includes 6 rolls: 2 turning, 1 each of burring, wiring, crimping, and

ogee bead. Standard clamp for table mount operation.

Cutting Capacity.......................22GageDistance Between Shaft Centers.................................................2” (50.8mm)Depth of Throat to Frame.....7”(175mm)Net Weight....................64Lbs(29 kgs)Gross Weight..................71Lbs(32kgs)Overall Dimension (LXWXH)...............................16”x8”x16”(458x203x406mm)

Rotary Machine

Order No. 130-5400

.118”Turning

.157”Turning

.236”Burring

Wiring.236”Crimping

OGEEBead

RRRRRolls/Rolls/Rolls/Rolls/Rolls/Rotarotarotarotarotary Macy Macy Macy Macy Machine/Thine/Thine/Thine/Thine/Taaaaabbbbble Fle Fle Fle Fle Feeds/Peeds/Peeds/Peeds/Peeds/Pararararart t t t t WWWWWasherasherasherasherashersssss

Order No. 199-1043

Order No. 199-1026


498496SpecificationsWidthRolling Dia.Weight

Order No.130-120012”1-1/2”115lbs

Order No.130-240024”1-1/2”264lbs

Order No.130-300030”1-1/2”285lbs

Order No.130-400040”1-1/2”570lbs

Order No.130-523152”2”680lbs

Removable male dies with female dies. Micro adjustable set back Gauge standard equipment. One piece 24” two position handle.

3 in 1 Combination of Shear, Brake & Rolls

Hand Shear

Optional Stands 13B-0312 13B-0324 13B-0330 13B-0340 13B-0352

Order No.DimensionWeightMax Shear WidthShear Thickness

96”x29-1/2”x 41-1/3”.550lbs.78-5/8”.1/20”

130-5155

SpecificationsCapacity: 16 GaugeRange Back GaugeRange Front GaugeWeight(N.W.)

37” x 16 GaugeOrder No. 130-370037”30-3/4”35”775lbs

52” x 16 GaugeOrder No.130-520052”30-3/4”37-1/2”1,030lbs

37” & 52” x 16 Gauge Front, Side & Back Gauge. Use for mild steel, aluminum,

copper, brass, zinc, plastic and lead. Finger guards. High chrome high steel blade.

Precision Foot Shears

Blade length: 8”. Max. Cutting/ Bending length: 7-7/8”. Mounting base 9”x5”.

7-1/2" Mini Shear Brake

Order No. 130-5050

Capacities:Copper and brass...................20gaugeAluminum...............................18gauge

Dimension: 63-1/2”x23-1/2”x50”. Bends 16 gauge steel. Weight 1600lbs.

40" Bending Brake

Order No. 130-5140

Unlimited throat depth. 4” opening. 18 gage capacity. Maximum angle 135 degree.

Order No. 130-3024

24" Bending Brakes

130-101414gage(0.747")24.25"1.25"90sfm1ph115/230V1ph60Hz15.2/7.6amps2.0"2pcs4x0.5x0.75"1"460lbs

Order No.Max Cutting Cap.(Mild steel)Max Cut WidthMin Cut WidthHorsepowerVoltagePhaseCycleFull Load AmpsShaft DiameterBlades

Side Wall ThicknessWeight

130-101120gage(0.359")24.25"1.25"90sfm1/3ph115V1ph60Hz6.4amps1.25"2pcs4x0.5x0.75"0.375"215lbs

130-101216gage(0.598")24.25"1.25"90sfm3/4ph115/230V1ph60Hz11.6/5.8amps1.50"2pcs4x0.5x0.75"1"375lbs

130-101316gage(0.598")30.25"1.25"90sfm3/4ph115/230V1ph60Hz11.6/5.8amps2.0"2pcs4x0.5x0.75"1"540lbs

Specification

Power Slitter

Fully Steel construction with a machined bending edge. Both simple and complex

forming, like boxes, trays, covers, etc. Unique toggle clamp designed for quick

and positive clamping.

Specifications

WidthCapacity WeightDimension

Order No. 130-5130 Order No. 130-5135

Order No.130-5130

41”18Gage205lbs54”x40”x38-1/2”

Order No.130-5135

42”18Gage209lbs51-1/2”x38-1/2”x30-1/2”

Bending Brakes

ShearShearShearShearShears/Bending Brs/Bending Brs/Bending Brs/Bending Brs/Bending Brakakakakakes/Pes/Pes/Pes/Pes/Pooooowwwwwer Slitterer Slitterer Slitterer Slitterer Slitter


BrBrBrBrBrakakakakakeseseseses

Bending Length 97" Bends 22 gauge steel Weight 790lbs.

Bending Length 60" Bends 20gauge steel Weight 680lbs.

Order No. 130-5145

Hand Bending Brakes

Order No. 130-5150

Order No. 130-5160

Solid Finger ModelSimple, easy to set up and operate. Body sections are welded steelplate, with heavy truss rods and braces.

Capacity mild steel: 20 gage. Bending length: 48-1/4”. Max. Depth of box: 4” Max. lift of beam: 1-1/4” Ship weight: 470 lbs.

48" Hand Brake

Bolted construction.Painted steel plate

Order No. 130-4899

Brake Standfor 48"x16 & 48"x22 Pan & Box Brakes

SpecificationCapacity: Mild Steel Stainless SteelMax. Beam LiftMax. Bend LengthMin. Reverse BendFinger WidthNumber of FingersMax. Box DepthBeam Adjustment

48”x22 GaugeOrder No.130-482222 Gauge26 Gauge7/8”48-1/4”5/16”2”,3”,4”163”0-1/8”

48”x16 GaugeOrder No.130-481616 Gauge20 Gauge1-1/4”48-1/4”5/16”2”,3”,4’163”0-5/8”

Removable fingers. Maximum gauge capacities

are applicable when using mildsteel.Using galvanized steel lowersthe maximum gauge capacity.

Sheet Metal Pan & Box Brakes

Capacity: Mild Steel................................................................12 GaugeStainless Steel........................................................................16 GaugeMax. Bending Length......................................................48-1/2”/1220mmMax. Beam Lift...................................................................1-1/2”/38mmBeam Adjustment.............................................................0-1/2”(0-13mm)Net Weight...............................................................1280lbs/581kgGross Weight.........................................1587lbs/720kg

Order No. 130-4812

Heavy-Duty Floor Model, 48”x12 Gage

Pan & Box Brake

Order No. 130-3616

Universal Brakes

Max. Bending Length.........................................................................36”Capacity Mild Steel..................................................................16GaugeMax. Lift of Beam ..........................................................................3/4”Finger Width..................................................................................1~6”Max. Depth of Box.............................................................................3”Weight......................................................................................405lbs

Completely portable. Rigid cast iron. Bronze bushings. Maximum gage capacities are applicable when use mild steel. Using galvanized steel lowers the maximum gage capacity.

Mild steel up to 18 gage. Adjustable cams for bending

from 0 to 135 degree. Ground bed for clean,

straight edge forming.

Perfect for the home hobbyist and delicate forming jobs.

12" Bench Hand Brake

Order No. 130-5112


Air BearingThis air bearing is one of main attachment for Cutter Master, whichcan be used with other sharpener too.

Main Technical parameters:Max Stroke of Air Bearing Sleeve: 9"Collet Type: 5CT slot of worktable: 1/2"(12.7mm)Air Consumption: >=0.63MpaPipe Joint: Z 1/4"Swivel: 360degreeParallelism of workhole center line to the base: 0.001mm/100mmTIR of workhole center line(60mm from hole end): 0.015mm

SpecificationsMax. Grinding Dia..............................................................8-21/32”Max. Grinding Length............................................................9-1/4”Air Bearing Fixture Center Height............................................4-3/4Longitudinal Table Travel.............................................................6”Worktable Surface Dimension Longitudinal...................................................16-1/2”x5-21/32” Cross........................................................12-29/32”x5-21/32”Worktable T-Slot.......................................................1/2”x3/4”x5/16”Table Infeed Graduation.........................................................0.001Max. Wheel..................................................................5”x2”x1-1/4”Tilt Adjustment For Wheelhead............................................+30°-5°Wheel Spindle Revolution..............................................3450R.P.M.Air Bearing Stroke.................................................................9-1/4”Motor................................................................1Phase,110V/220VOverall Dimensions............................................24”x24-1/2”x19-3/4”

Order No. 287-6540

Specialized for grinding various End Mills, Countersinks, Taps,Drills and Machine Tools Simple, safe operation—anyone can learn. High-grade castings throughout, precision machined and fitted! Rapid mounting of attachments. Sliding motor mount for rapid setting and lock. Wired for 110 Volts, single-phase motor. Uses standard 5C Collets. Dovetail ways with adjustable gibs.

Cutter Master/GrindersCutter Master/GrindersCutter Master/GrindersCutter Master/GrindersCutter Master/Grinders

Cutter MasterEnd Mill Grinder

SpecificationCollet CapacityCollet Sizes

Taper AngleNegative Taper AngleRelief AngleLongitudinal TraverseMotorSpindle SpeedPowerGrinding Wheel:( DiameterxThicknessxBore)Overall Dimensions:Net Weight

1/8" to 5/8" (3 to 16mm)1/8.3/16,1/4,5/16,3/8 1/2,5/8"(3,4,5,6,8,10,12,16mm)0 to 180°0 to 52°0 to 44°5-1/2"/140mm1/4HP, 3400 RPM, Single Phase5200 RPM110V/220V4 x 2 x 3/4" /100x50x20mm

19 x 15 x 15" / 50 x 40 x 40 mm110 lbs/55 kgs

Universal Cutter Grinders

Description110V220V

Order No.287-6610287-6612

DescriptionsTwist Drill Grinding AttachmentEnd Mill Grinding Attachment (Max Cap.3-16mm/1/8-5/8")Lathe Tool Grinding Attachment (Max Cap.20x26mm/3/4x1")Grinding Wheel Balancing Stand

Order No.287-6621287-6622287-6623287-6624

Optional Accessories

Regrinding most universalcutting tools including EndMills, Drills, Tool Bits andCutters which materialsrange from high speed steelto carbide.

Order No. 287-6549

This attachment is one of main attachment for CutterMaster, which is applicable to grind ball end mills, also canbe used with other sharpeners.Main Technical Parameters:T Slot Size: 1/2"(12.7mm)Collet Type: 5CMin Feeding: 0.0005"Max Arc Radius of Grinding: 3"

Radius Attachment

Used for precision grindingof square tools with anydirection.

Universal Sharpener

Equal Dividing: 30degreeParallelism of workhole to the base: 0.02mm/60mmRadius Runout of work hole center line(60mm fromhole end): 0.015mm

Order No. 287-6613

Order No. 287-6548


Motor(Single Phase)....…1/4HP;110/220V; 60HZ,3450RPMBelt Size…….............................1”x30”Table...........................................5x5”NW/GW……....……............15.4/16.5lbsPacking Size .............370×250×250(mm)

Order No.150-3011

Grinder/RGrinder/RGrinder/RGrinder/RGrinder/Resharesharesharesharesharpener/Base Drill/Sanderpener/Base Drill/Sanderpener/Base Drill/Sanderpener/Base Drill/Sanderpener/Base Drill/Sandersssss

This dry-type knife grinder is ideal for sharpening planer and jointer knives. Castiron construction, together with large capacity makes this grinder an excellentinvestment. Heavy-duty motor is 1/2 H.P., capacitor start, 110V, with pre-

Max. Length of Grinding Blade.............630mmRotating of the Grind Head..............2880RPMCup-shaped Grinding Wheel........100x50x20mmWeight..................................67kgDist. Front of Blade............10”

Work table angle adjusts from 15° to 90° 120-grit stone included. Micro-Adjustable depth of cut. Wheel Size: 6”x1-1/2”x1/2” Weight: 55lbs.

Universal Knife Grinder

Straight Blade Grinder

Order No. 150-1000

Order No.Belt SizeDisc SizeSpeedTable SizeMain MotorTable TiltBelt TiltMachine DimensionsGross Weight (approx.)

150-04604”x36”6”3450 RPM6”x8-4/5”110V,1/3HP0-45°0-90°22”x11”x12”39lbs

Disc angle and bevel sanding. Finish edging. Belt and disc included.

Order No. 150-0460

Order No. 199-2063

Supplied with CBN wheelUsed for grinding cutting tools such as HSS, Carbide Steel and Ceramic toolsMain Technical Parameters:Grinding Capacity: Dia: 28mmWheel Dia: 150mmBack Angle of Wheel: 30 degreeTable Size: 133x280mmTable Travel: 80mmUp and down Adjustment of Table: -10 to 25 degreeLocking Block Swivel: +/-70 degreeMotor: 220V/250W/1400rpm

Easy operation for grinding ondrill web and chisel edge.Main Technical Parameters:Grinding Capacity: 2-19mmSpindle Speed: 10000rpmMotor: 220V/3.2A/250W/50Hz

Lathe Tool Grinder

Drill GrinderOrder No. 287-6014

Order No. 287-6015

Can grind twist drills with two flutesGrinding range: cutting edge and crossing edgeGrinding diameter: 3-21mmGrinding Angle: 118-150degreeSupplied with Diamond grinding wheelMotor: 220V/3.2A/1000rpm/50Hz

Precision Drill Resharpener

Can grind twist drills with two flutesGrinding range: cutting edge and crossing edgeGrinding diameter: 3-21mmGrinding Angle: 118-135degreeSupplied with Diamond grinding wheelMotor: 110V or 220V

Electr-Magnetic Base Drills

Order No. 287-6016

110VOrder No. 287-6017

SpecificationsDrill CapacityRated speedMotor powerElectromagnetMax travelWeight

Order No.199-0101Dia 23mm330rpm1000W12000N180mm30kgs

Order No.199-0102dia 25mm350rpm1100W12500N210mm32kgs




220VOrder No. 287-6019

lubricated ball bearings andruns at 3450 R.P.M.

1x30" Belt Sander

4" Belt & 6" Disc Sander

Speed: 1720 RPM. Table: 8-1/4” x17-3/8”. Table Tilts: 0-45°. Weight: 32kg/70lbs. With a powerful 1 HP, 110V motor Cast iron frame with cast

aluminum tilting table. Complete with a dust chute

and a mitre gauge. Order No. 199-9000

12" Disc Sander


Motor (Single Phase)................1/4HP; 110V/230V, 60HZ; 2850RPMBelt Size…………...................1”x30”Disc Size..................................5”Table......................................5x5”Table Tilt.................................0-45°NW/GW……....……..............19/22lbsPacking Size ...........370×250×385(mm) Order No.150-3012

1x30" Belt & 5" Disc Sander

Belt & Disc SandersBelt & Disc SandersBelt & Disc SandersBelt & Disc SandersBelt & Disc Sanders

Order No.Disc DiameterMotor

Spindle SpeedAbrasive Belt SizeTable for Abrasive BeltTable Working Surface

150-120012”1PH,1HP, 115-230V, 60HZ3600RPM6”x48”7-1/2x14-1/2”7x16-1/2”

The table for the abrasive belt can be tilted 20° one way, 45° the other. Table for 12” disc has working surface

of 7”x16-1/2” and can be tilted.

Order No. 150-1200

Stand OnlyOrder No. 150-1201

Combination 6" Belt Sander &12" Disc Grinder

Order No.Belt SizeDisc SizeSpeedTable SizeMain MotorTable TiltBelt TiltMachine DimensionsGross Weight (approx.)

150-04614”x36”6”3450 RPM6”x8-4/5”110V,1/3HP0-45°0-90°22”x11”x12”46lbs

Disc angle and bevel sanding. Finish edging. Belt and disc included.

Order No. 150-0461

4" Belt & 6" Disc Sander

Order No.

Abrasive Belt SizeDisc DiameterVoltageInput PowerMotor R.P.MTable TiltBelt TiltNet WeightGross WeightPacking Measure

150-06906”x48”9”110V/220V1 HP34500-45°0-90°48kg50kg720x350x440mm

Stand OnlyOrder No. 156-9900

This deluxe combination belt and disc sander can be used for vertical orhorizontal finishing of both metal and wood.This machine included a adjustable stand.

Order No. 150-0690

Combination 6" Belt Sander And 9" Disc Grinder

DescriptionPower of MotorWork TableWork Table TiltDia. of Grit InflatorReciprocating TravelWeight

Order No. 199-0326

Vertical Reciprocating Sander

0.37KW370x370mm0-45°51, 38, 22,

24mm30kg

DescriptionPower of MotorSpeed of Belt InflatorSize of Large Grit InflatorSize of Small Grit InflatorWeight

Order No.199-31120.75KW2900RPM4-3/4x8”3-1/8x8”95lbs.

Order No.199-31250.75KW1450RPM8-3/8x6-1/3”3-1/8x8”95lbs.

Sander Pneumatic Drums

Sanding MachineDescriptionSanding Belt SizeSanding Belt SpeedTable SizeTable TravelMin. Sanding RadiusTable Revolving AngleBelt Moving RangeMotorOverall SizeWeight

2515x152mm16mm/s840x300mm80mmR 7590° - 180°8mm1.1kw 50Hz/60Hz1320x550x1180mm150kg Order No. 150-2030

DescriptionMotorSpindle Dia.Rotating SpeedTable SizeWeight

Order No. 199-05181.5KW or 1.1KW1” or 3/4”7500RPM26”x20”264lbs

Order No. 199-05150.55KW3/4” or 1/2”7500RPM18”x15-1/2”132lbs

Tilting Spindle Shapers


Power(HP)1/41/41/31/31/21/2

RPM280034002800340028003400

WT(KG)6.76.78.29.214.615.2

Volt/ F220V/50Hz110V/60Hz220V/50Hz110V/60Hz220V/50Hz110V/60Hz

Order No.160-1010160-1025160-1110160-1125160-1210160-1225

Size of Wheel125x16mm5x5/8”150x20mm6x3/4”200x20mm8x3/4”

Heavy duty direct drive motor. Adjustable tool rests provide correct working angle. Adjustable spark deflectors. Adjustable shatter-proof eye shields for maximum safety. Fine and coarse wheels. Non-slip rubber feet and fixable hole. Removable wheel changes. Optional wire and cotton buffing

brushes available. Wide wheel spread permits

grinding longer lengths. 3 Conductor core with 3 prong plug.

Auto-on Light Grinders

Height 800mm,

Weight 10kg

Order No. 150-3060

Height 830mm,

Weight 26kg

Order No.150-3065

Grinder Stands

Motor Power: 2200WSpeed: 2950rpmBlade Size/Teeth: dia 405x30mm/40teethMin Cutting Diameter: 25mmMax Cutting Diameter: 130mmNetWeight: 36kgs

Motor Power: 2200WMax Splitting Force: 6 tonsMax Cylinder Travel: 480mmDiameter of Cylinder: 63mmHydraulic Oil Capacity: 3LSplitting Log Diameter Range: 50-320mmSplitting Length: 1040-770-520mmNet Weight: 92kgs

PM5-370Motor Power: 1500WMax Splitting Force: 5 tonsMax Cylinder Travel: 310mmDiameter of Cylinder: 60mmHydraulic Oil Capacity: 2.6LSplitting Log Diameter Range: 50-250mmMax Splitting Length: 370mmNet Weight: 43kgs

Log Saw

Vertical Log Splitter

Log Splitters

PM5-520Motor Power: 1500WMax Splitting Force: 5 tonsMax Cylinder Travel: 390mmDiameter of Cylinder: 60mmHydraulic Oil Capacity: 3.5LSplitting Log Diameter Range: 50-250mmMax Splitting Length: 520mmNet Weight: 49kgs

Order No,MotorMotor Shaft Dia.Speed

Wheel sizeWheel GritWheel MaterialWorklightWheel Dressing ToolCoolant Tray

160-13011/3hp,250W1/2"2850rpm(50Hz),3450rpm(60Hz)6x3/4"36#/60#Al.OxideYesYes

160-13021/3hp,250W1/2"2850rpm(50Hz),3450rpm(60Hz)6x3/4"36#/wireAl.Oxide/WireYesYes

160-13051hp,550W3/4"2850rpm(50Hz),3450rpm(60Hz)10x1"36#/60#Al.OxideYesYes

160-13031/2hp,370W1/2"2850rpm(50Hz),3450rpm(60Hz)7x3/4"36#/60#Al.OxideYesYes

160-13043/4hp,550W5/8"2850rpm(50Hz),3450rpm(60Hz)8x1"36#/60#Al.OxideYesYes

Bench Grinders

Order No. 199-1310

Order No. 199-1311

Order No. 199-1313

Order No. 199-1312

120V, Order No. 199-9034230V, Order No. 199-9033

Mitre SawsMotor: 230V 50Hz, 1500/1800W, 4500rpm 120V, 60Hz, 13/15A, 5000rpmBlade Size: Dia:254x15.9x2.8mm, 40TTable turning range: Left 45

o-right 45

o

Saw Body tilting range: 0-45degreeExterior size: 530x610x300mmGW: 21kgs

0075x130

Max Cutting capacity Work table tilting angle Heading tilting angle Height x width

45(right)075x90

04548x120

45(right)4555x86

45(left)4548x98


Motor: 230V, 50Hz, 1500W; 4500rpmBlade Size: Dia 254x15.9x2.8mm, 40TeethBlade Tilting Range: 0-45degreeBlade Rising Range: 0-80mmMin Cutting Capacity: 80mm(90degree), 55mm(45degree)Table Size: 638x430mmExtension Table Size (left/right): 638x260mmExtension Table Size (rear): 430x300mmNet Weight: 35.4kgs

Table Saw

Order No. 199-9007

Table Saw

Order No. 199-9006

DescriptionTable SizeVise TiltDepth of CutThroatBlade Size

Power

12”Order No.199-9012356x356mm0-45°150mm12”/305mm2082.8x3.1-12.7x0.36mm0.39kW

14”Order No.199-9014356x356mm0-45°160mm14”/340mm2400x3.1-12.7x0.36mm0.75kW

Maximum Cutting Depth at 90°: 3-1/8”. at 45°: 2-1/2”.Blade Capacity: 10”.Motor: 120V, 60HZ, 2HP, 10AMP, 4500RPM.

16”Order No.199-9026500x390mm0-45°200mm350mm2700x6-30x0.9mm1.5kW

18”Order No.199-9028500x600mm0-45°250mm430mm3300x6-30x1mm1.5kW

24”Order No.199-9032600x600mm0-45°370mm560mm4065x50x1mm3kW

20”Order No.199-9030500x390mm0-45°300mm460mm3370x10-40x1mm2.2kW

Order No. 199-9005

DescriptionTable SizeVise TiltDepth of CutThroatBlade SizePower

Delta Style

Order No. 199-9110

This bandsaw is mainly designed for cutting woods,plastics and wood like products. It can be used for bevel and contour cutting.

10" Band Saw

Table Saw

16"-24"

Features:

1/5 H.P. ball bearing induction motor with direct drive system giving high reliability and long life. The blade is moving continuously, providing high efficient cutting ability. Die cast aluminum table tilts from 0° to 45°

for bevel and contour cutting. One piece base and steel box frame section

assures strength and rigidity. Special formed guards fully enclose all

moving parts for operator safety.

Wood Cutting Band Saws

16”/18” 20”/24”


Max. Thickness of cut: 2”. Throat: 16” Blade length: 5”(pin type). Cuts/minute: 1,725(60HZ). Stroke: 3/4”. Table size: 14-1/2”x7-7/8”. Table tilt: 90-45° left. Base size: 15-7/8” x8-1/2”. LXWXH: 21-1/2”X11-1/2”X12”. Weight: 44lbs.

110V, 1/8HP Motor, Machined Table Surface

16" Scroll Saw

110V, Order No. 199-9023

220V, Order No. 199-9027

Motor: 230V, 50Hz, 1000W 2950rpmBlade size: Dia205x16x2.5mm, 20TBlade tilting range: 0-45degreeTable size: 513x400(600)mmMax cutting depth: 43mm(90degree)36mm(45degree)Extention size: 550x600x366mmGW: 23kgs


Order No.Max.Cut Depth at 0°Max.Cut Depth at 45°Table SizeTable Extent SizeDist. Front of BladeFence SizeSpeed 50HzSpeed 60HzMotor

199-23253-3/8”3-3/8”20-1/8”x27”10-1/8”x27”10”2-1/2”X33-1/8”3750-4500RPM3750-4500RPM0.75KW-1HP

199-23304-3/8”3-3/8”20-1/8”x27”10-1/8x27”12-1/2”2-1/2”X33-1/8”4500RPM3750RPM1.5KW-2HP

Wood Working Circular Saws

DescriptionTable SizeVise TiltDepth of CutThroatBlade SizePower

352x352mm0-45°6”/150mm14”/352mm2375x10x0.6mm0.55KW/3/4HP

DescriptionTable SizeVise TiltDepth of CutThroatBlade Size

Power

12.5”Order No.199-9018500x390mm0-45°160mm12.5”/305mm2240x6-20x0.6mm0.55kW

14”Order No.199-9020500x390mm0-45°180mm14”/335mm2400x6-20x0.6mm0.75kW

1 Speed & 4 Speeds

14" Wood Cutting Band Saw

2 Speeds


Order No. 199-9016

SpecificationsCutting CapacityCutting DepthCutting SpeedHorse PowerVoltageWeight

Order No. 150-06106”1/2”4600RPM3/4110V165lbs

Order No. 150-08108”7/16”4600Rpm1110V418lbs

Compare with the regular jointers, the new type jointes has the following features. Fence body could be move out of the work table, to let cutting width bigger. Work table is 1-3/8” longer than the regular 8” jointer.

Rabeting Jointers

Max. Turing Length: 37” Max. Turning Dia.: 12” Spindle Speeds: 500-850-1310-2100-3100 RPM. Spindle: MT1 Taper, 3/4-16 TPI. Tailstock: MT1 Taper. Motor: 1/2HP, 115V, 60HZ. Size of Seating Plane: 52”x14”x12”.

Order No. 130-5092

Order No. 130-5091

Comes with chuck plate, mount on work bench. Max. Cutting Length: 40” Max. Cutting Dia. : 14” Motor 110v, 1/2HP, 60HZ. Overall Size: 58”x9-1/2”x13” Rotating Speed:810-1180-1700-2480RPM

Wood Turning Lathe

Wood Lathe

SpecificationsCutting WidthCutting DepthCutting SpeedAngle RangeHorse PowerVoltageNet WeightGross WeightPacking measure

155mm (6-1/8”)2.38mm (3/32”)8000-16000 R.P.M45°1.6HP110V-240V13kgs (29lbs)15kgs (33lbs)780x350x330mm

Series Motor. Double isolation. High speed cutting.

6-1/8" Jointer Planer

Order No. 150-0608

Motor: 230V, 50Hz, 1800W; or 120V, 60Hz, 15AMin Cutting Length: 140mmMax Cutting Width: 330mmMax Cutting Depth: 3mmRange of Cutting Depth: 5-150mmFeeding Speed: 4m/min, 6m/minBlade Speed: 9000rpmNet Weight: 40kgs

230V, Order No. 199-9008

Thickness Planner

120V, Order No. 199-9009

230V, Order No. 199-9008


DescriptionKnife Spindle Dia.MotorMaterial Feed SpeedTravel of SpindleWorking DepthMax. Working WidthSpindle Speed

30mm2.2KW7.5m/min0-20mm5-80mm100mm6000RPM

DescriptionMortising WidthMax. Mortising DepthDrill Chuck CapacityTable SizeBase SizeVertical Spindle TravelSpindle to FenceChisel to TableMotor

1/4”,3/8”,1/2”3”1/2”13-1/3x6”10”x7-3/4”3”3-3/4”5”1/2 HP

DescriptionCutting Depth

Cutting WidthSlide BearingRevolving AngleMotorWeight

2”12”180°

1KW, 2800 RPM60lbs

This is a great machine for sanders, router tables, shapers and other work. Itis also portable, so you can take it to the job site where it can handle the bigjobs, a regular shop vacuum can not handle.

Motor Size: 110V/3450 RPM or 220/2850 RPMMotor Power: 1HPAir Flow: 660CFMGross Weight: 25kgNet Weight: 22kgPacking Size: 470x400x410mm

Order No.150-2020

Motor Size: 110V/3450 RPM or 220/2850 RPMMotor Power: 1HPAir Flow: 660CFMGross Weight: 40kgNet Weight: 38kgPacking Size: 770x460x500mm

Order No.150-2025Order No.199-9002

Saw Wheel Diameter..........................255mmPower.................................................75HPVoltage..........................................110/220VFrequency...................................... 60/50HzTable Size..................................570x440mmBlade Speed..................................250M/Min.Processing Scope................250x200x200mmMeat Grinder Mouth Dia. ....................110mmMeat Grinder Throat Dia. .....................55mmMachine Dimension.............600x500x1520mm

WWWWWood ood ood ood ood WWWWWorororororking Macking Macking Macking Macking Machine/Dust Collectorhine/Dust Collectorhine/Dust Collectorhine/Dust Collectorhine/Dust Collectorsssss

Mortising Machine Wood Forming Shaper

Multi-Function Cutter

Order No. 199-3620

Order No. 199-2002Order No. 199-3612

DescriptionHeightAdjustmentHose Dia.Hose Top SizeHose LengthHoseStand Feet

Order No.150-4001

680-1100102320x36

witoutSteel Plate

Order No.150-4011

680-1100102320x362200mmwithSteel Plate

Order No.150-4021

680-1100102320x36

witoutCast lron

Order No.150-4031

680-1100102320x361850mmwithCast lron

Dust Hose Stands

Dust Collectors

Fence tilts right & left 45¡ãwith positive stops at 45¡ã& 90¡ã. 8” model has steel base

and magnetic control switch.

Meat Saw And Grinder

SpecificationsCutting CapacityMax. Cutting DepthKnivesCutter Head SpeedTable SizeFence SizeMotorVoltageWeight

Order No.150-06006”1/4”34500RPM6-1/8X41-3/4”3-7/8”X34-7/16”1HP110V165lbs

Order No.150-07007”3/8”34500RPM8-1/2X42-1/2”3-7/8X34-7/16”2HP110V215lbs

Order No.150-08008”3/8”34500RPM9X52-3/4”3-7/8X34-7/16”2HP110V330lbs

Order No.150-04004”1/2”34500RPM5-1/8X35-1/2”3-11/16X24-13/16”1/2HP110V143lbs

Rabeting Jointers

Single Bag

Double Bags


DescriptionSize 24", with 1/2” Dovetail Template(150-0113)Size 18", with 1/2” Dovetail Template(150-0123)

Order No.150-0110150-0120

DescriptionStraight Shape Template for 150-01107/16" Dovetail Shape Template for 150-01101/2" Dovetail Shape Template for 150-0110Large Dovetail Shape Template for 150-0110Round Hole Template for 150-0110Straight Shape Template for 150-01207/16" Dovetail Shape Template for 150-01201/2" Dovetail Shape Template for 150-0120Large Dovetail Shape Template for 150-0120Round Hole Template for 150-0120

Order No.150-0111150-0112150-0113150-0114150-0115150-0121150-0122150-0123150-0124150-0125

Optional Templates

Size: 300x30mm.Dovetail Jig completes with a1/2” Dovetail Template(150-0131).

Order No.150-0130

Description1/2" Dovetail Template for 150-01307/16" Dovetail Template for 150-01309/16" Dovetail Template for 150-0130

Order No.150-0131150-0132150-0133

Optional Templates

Different jointing types and a working width of up to 650mm give the tool a wide range of applications. The folding template means that there is no tiresome template removal

process when positioning and changing the workpiece. The simple workpiece clamping system make sure a simple positioning of the

workpiece and the template, and the permanently accurate height setting by using the eccentric disk which leads to accurate results without the need for reworking. The Shorter setup times due to simple change between jointing types, quick

template replacement and precise rotation stop setting. Simple handling since no additional tools are required.

DoDoDoDoDovvvvvetail Jigs/Tetail Jigs/Tetail Jigs/Tetail Jigs/Tetail Jigs/Taaaaapping Macpping Macpping Macpping Macpping Machinehinehinehinehine

Multi-Function Jointing Systems Dovetail Jigs

Normal pressure 10 KN. Stroke of Slide 1-5/8”. Stroke per minute 250 S.P.M. Max. Shut Height 6”. Diameter of Stem Hole in Slide 3/4”. Bed Size (BxL) 10-1/2”x10-1/2”. Motor 110V, 0.37KW. Weight 185lbs.

Mini Punching Machine

This mini punching machine is well de-signed for small scale enterprise , It is aideal punching machine for mechanicalrepairing, model making and other use.

Order No. 199-1000

Jointing System

Order No. 150-0111 Order No. 150-0112

Order No. 150-0113 Order No. 150-0114

Order No. 150-0115

with 1/4” and 1/2” 2 in 1 dovetail template

Size: 12x1-1/4"(305x31mm).

Order No.150-0140

Dovetail Template Only1/4" and 1/2" 2 in 1 Template

Order No.150-0141

Simple to setup this sturdy and well made jig, simultaneously cut identical pinsand tail of half blind dovetail joint as many as you want.

This kind of machine also has the advantage of high precision, more function,vast use, easily operated and so on. It is ideal metal material processingequipment for small scale enterprise, model making factory and mechanicalrepairing.

Order No.130-1040

1/3”3/8”5”

1-5/8”B127-1/2”x7-1/2”2

400-800500-990110V, 0.370KW

DescriptionsMax. Tapping Dia.Steel ( Thickness >=3/8”)Cast Iron, Copper etc.Distance From Spindle Axis toColumn SurfaceSpindle TravelSpindle TaperTable SizeNo. Of Spindle SpeedSpindle Speeds (R.P.M) Tapping ReversingMotor

Dovetail Jigs Tapping Machine

Order No. 130-1040


SpecificationMotorMax drilling capacitySpindle travelSpindle taperColumn diameterSpindle speedMax distance from spindle axis to surface of columnMax distance from spindle end to surface of tableMax distance from spindle end to surface of baseTable sizeBase sizeExterior sizeGW

Order No. 125-1020

230V, 50Hz, 450WDia 20mm80mmMT2Dia 80mm12 speeds:220-2600rpm190mm725mm1220mm300x300mm500x300mm700x350x1610mm82kgs

Order No. 125-1025



Order No. 125-1016230V,50Hz, 500W

Dia 16mm50mmMT2Dia 46mm9 speeds:280-2350rpm

115mm270mm330mm170x170mm320x198mm490x220x610mm26kgs

Order No. 125-1017230V, 50Hz, 450Wor 120V, 60Hz, 6.6ADia 16mm80mmMT2Dia 70mm12 speeds:210-2220rpm16 speeds:210-3840rpm169mm390mm640mmDia 290mm250x434mm600x350x990mm56kgs

Drill PressesDrill PressesDrill PressesDrill PressesDrill Presses

Drill Presses

Order No. 125-1032


Order No. 125-1033


Order No. 125-1013230V, 50Hz,350W

Dia 13mm50mmMT2Dia 46mm5 speeds:580-2650rpm5 speeds:760-3070rpm104mm200mm290mm160x160mm314x200mm355x225x580mm20kgs

SpecificationMotor

Max drilling capacitySpindle travelSpindle taperColumn diameterSpindle speed

Max distance from spindle axis to surface of columnMax distance from spindle end to surface of tableMax distance from spindle end to surface of baseTable sizeBase sizeExterior sizeGW

Order No. 125-1018230V, 50Hz, 450W120V, 60Hz, 6.6ADia 16mm80mmMT2Dia 70mm12 speeds:210-2220rpm16 speeds:210-3840rpm169mm780mm1210mmDia 290mm273x456mm600x350x1570mm63kgs

Order No. 125-1013 Order No. 125-1016 Order No. 125-1017 Order No. 125-1018

Order No. 125-1020


This machine can be widely used for cutting various shaped material such as columnar steel, angle steel, steel pipe, band steel especially for cutting alloy steel,quenching steel, stainless steel etc. It is the ideal cutting tool for petroleum and chemical industry, construction metallurgical industry, maintenance of machinery


SpecificationsRotation RateWheel Size(mm)Motor PowerVoltage

Frequency(HZ)Dimensions(mm)Weight(Kg)Capacity: Round(mm) Rectangle Square

Order No. 150-10102242405x3x25.42.2H.P.(3)Three-Phase380/430V50(60)930x406x49090100x6100x100x1040

Order No. 150-10152242405x3x25.42.2H.P.(3)Single-Phase220/240V50(60)930x406x49093100x6100x100x1040

Order No. 150-10202242405x3x25.42.2H.P.(3)Three-Phase380/430V50(60)740x480x58060100x6100x100x1040



Band Saws/Sawing MachinesBand Saws/Sawing MachinesBand Saws/Sawing MachinesBand Saws/Sawing MachinesBand Saws/Sawing Machines

High Speed Abrasive Sawing Machines

Order No. 199-5012 Order No. 199-5018Order No. 199-5010

Order No. 199-5012114mm/100x150mm70mm/70x60mm1638x0.6x12.5mm1/2HP 60Hz 1700RPM1/2HP 50Hz 1400RPM24, 36, 61 (60Hz)20, 29, 50 (50Hz)245x178mm0-45°800x450x1000mm

DescriptionCapacity 90°(Round/Rectangle)Capacity 45°(Round/Rectangle)Blade SizeMotor

Blade Speeds(M/min)

Ver. Cutting Plate SizeVise TiltPacking Size

Order No. 199-5018180mm/180x300mm110mm/110x180mm2362x0.8x19mm3/4HP 60Hz 1700RPM1HP 50Hz 1420RPM41, 49, 69, 120 (60Hz)34, 41, 59, 98 (50Hz)

0-45°1250x445x1070mm

Order No. 199-5010105mm/100x105mm55mm/55x60mm1140x13x0.66mm1800W, 220/110V50/60Hz, 5A20-70

0-45°1250x445x1070mm

Order No. 199-5008

Order No. 199-500890mm/90x115mm65mm/65x65mm1300x12.5x0.63mm400W, 220/110V50Hz20, 29, 50

0-45°760x305x465mm

Metal Cutting Band Saws


DescriptionsMax. Swing Over BedMax. Swing of CarriageMax. Length of work pieceSpindle Speeds Range ( 9 Speed)Hole Through SpindleMetric Threads (Number) RangeInch Threads( Number) RangeModule Threads (Number) RangePower of Main MotorDimensions

Light Horizontal Lathes

Specifications:Max. Swing over Bed 400mmMax. Swing over Carriage 210mmMax. Length of Work piece 1000mmSpindle Speeds Range: 45-1800 RPM.Hole Dia. Through Spindle 58mm

DescriptionsMax. Swing Over BedMax. Swing of CarriageMax. Length of work pieceSpindle Speeds RangeHole Dia.Through SpindleMetric Threads (Number) RangeInch Threads( Number) RangeModule Threads (Number) RangeDiametral Pitch Threads ( Number) RangePower of Main MotorDimensions

Order No. 199-1400400mm240mm1500mm26-1600RPM58mm0.5-7mm4-56 TPI0.5-7mm4-56D.P.4KW2320x1160X1720mm

Order No. 199-1440400mm235mm1500mm(12) 26-1600RPM58mm(17) 0.5-9mm(36) 36-2TPI(17) 0.5-9mm

4KW2760X1000X1280MM

Order No. 199-1440

Order No. 199-1400

LathesLathesLathesLathesLathes

Precision Horizontal Machine Center

Saddle Lathes

Order No. 199-2400

Metric Threads (Number) Range (21) 0.5-7mmInch Threads(Number) Range(32) 56-4TPI.Power of Main Motor 4KW

Dimensions: 1850x 1020 x 1320

DescriptionsMax. Swing Over BedMax. Swing of CarriageMax. Length of work pieceSpindle Speeds Range ( 9 Speed)Hole Through SpindleMetric Threads (Number) RangeInch Threads( Number) RangeModule Threads (Number) RangePower of Main MotorDimensions

Order No. 199-1280280mm165mm500mm150-2060 RPM28mm(16)0.2-3mm(16) 10-46TPI

0.75KW1220x68x1100

Order No. 199-1300300mm170mm750mm60-2000RPM38mm(20) 0.25-9mm(33) 72-4(3/4) TPI(12) 0.25-3.5mm1.1KW1530x650x1160

Order No. 199-1340340mm205mm1000mm60-2000RPM38mm(20) 0.25-9mm(33) 72-4(3/4) TPI(12) 0.25-3.5mm1.1KW1740x650x1150

Order No. 199-1280

Order No. 199-1300


Universal Milling Machines

Order No.199-0202254x1270(10"x50")8504204203x164700-405

Standard:R8,Optional: ISO30/40127Standard:16 shiftgrade,65-4500(60Hz), 80-5440(50Hz),Optional:Variable:65-4500 or 65-3750three steps, 0.04/0.08/0.15 rpm2.25kW/3hp90degree45degree1516x1550x2080mm per case1550

SpecificationTable size/mmLong travel/mmCross travel/mmVertical Travel/mmT-slot No and size/mmRam travel/mmDistance from spindle nose to table surface/mmSpindle hole taper

Spindle travel/mmSpindle speed/rpm

Auto quill feed/mmSpindle motorHead swivelHead tiltingPackage size/mmWeight/kg

Order No.199-0201230x1246(9"x49")8403054003x163120-415

Standard:R8,Optional: ISO30/40127Standard:16 shiftgrade,65-4500(60Hz), 80-5440(50Hz),Optional:Variable:65-4500three steps, 0.04/0.08/0.15 rpm2.25kW/3hp90degree45degree1400x1476x2030mm per case1160

Order No.199-0203305x1370(12x54")8703804303x165000-350

Standard: ISO40

127Standard:16 shiftgrade,65-4500(60Hz),80-3750(50Hz)three steps, 0.04/0.08/0.15 rpm3.75kW/5hp90degree45degree1566x1650x2080mm per case1700

Universal Turret NC Milling Machines

Order No.199-0213305x1370305x15003x16350800900360127500014105000-410

Standard:16steps,50Hz:60-4500/60Hz:80-5440Optional: Variable, 60-3750Standard: R8/Optional:ISO405hpSwiveling:90degree

200x200x2251900

Order No.199-0211230x1067230x12463x16200550740300127500013803150-380

Standard:16steps,50Hz:60-4500/60Hz:80-5440Optional: Variable, 65-4200Standard: R8/Optional:ISO403hpSwiveling:90degree,Tilting: 45 degree165x190x2001200

Order No.199-0212254x1270254x13703x16280750850400127500014004650-400

Standard:16steps,50Hz:60-4500/60Hz:80-5440Optional: Variable, 65-4200Standard: R8/Optional:ISO403hpSwiveling:90degree,Tilting: 45 degree190x200x2231500

SpecificationTable size/mm

T slotsTable loading/kgX axis travel/mm

Y axis travel/mmZ axis travel/mmX/Y/Z axis rapid feed/mm/minX/Y/Z axis servo motor/KWKnee vertical travel/mmRam travel/mmDistance from spindle to table/mmMIlling head Spindle speed/rpm

Spindle taper Motor power/hp Head rotating

Packing Size/cmG.W./kg

Order No.199-0201Order No.199-0202Order No.199-0203

Order No.199-0211Order No.199-0212Order No.199-0213

Universal Milling Machines

Universal Turret NC Milling Machines

Universal Milling MachinesUniversal Milling MachinesUniversal Milling MachinesUniversal Milling MachinesUniversal Milling Machines


H/V Milling Machine

SpecificationMax drilling dia/mmSpindle taperMax vertical milling dia/mmMax boring dia/mmMax tapping dia/mmDistance from spindle to table surface/mmSpindle speeds range Vertical HorizontalSpindle travel/mmAutomatic spindle feeds/ mm/rTable size/mmTable travel/mmOverall dimension/mmMotor/KW vertical HorizontalGW/kg

Order No.199-022150;30MT4, R8, ISO3025120M16100-480

115-1750(8)40-1300(12)120--1120x280;1000x280600x2601400x1630x2350

0.851.5/2.21350

SpecificationSpindle TaperDistance from spindle nose to table/mmDistance from Horizontal spindle nose to table/mmDistance between spindle and column/mmVertical quill speed/rpmSpindle travel/mmFeeding of quill/mm/rMax drilling capacity of auto-feeding/mmTable size/mmTable travel Horizontal/mm Cross/mm Vertical/mmdistance from spindle axis to arm/mmFeeding range of longitudinal, cross travel/mm/minAuto-feeding of Z-axis/mm/minT-lot(No.-width-distance)/mmMain motor/KWMotor for repaid device of table/WMotor for vertical device of table/WOverall dimension/mmGW/kg

Order No.199-0223ISO4090-3700-280200-5508 steps:60-1500rpm(vertical)12 steps:40-1300rpm(horizontal)120mm3 steps:0.08,0.15,0.25mm/rdia 12mm(iron), dia 8mm(steel)1250x320mm600mm300mm280mm170mm8steps:30-740mm/min560mm/min3-14-701.5KW(V)/2.2KW(H)750W750W1700x1480x21501550kg

SpecificationMax drilling dia/mmSpindle taperMax vertical milling dia/mmMax boring dia/mmMax tapping dia/mmDistance from spindle to table surface/mmSpindle speeds range Vertical HorizontalSpindle travel/mmAutomatic spindle feeds/ mm/rTable size/mmTable travel/mmOverall dimension/mmMotor/KW vertical HorizontalGW/kg

Order No.199-022250;30MT4, R8, ISO30, ISO4025120M16140-490

60-1500(8)40-1300(12)1200.08,0.15,0.251120x280;1000x280600x2601400x1630x2650

1.52.21350

H/V Milling MachinesH/V Milling MachinesH/V Milling MachinesH/V Milling MachinesH/V Milling Machines


Max. Drilling Dia.(mm)Max. Horizontal Milling Dia.(mm)Max. Vertical Milling Dia.(mm)Max. Tapping Dia.(mm)Spindle Speeds Range( R.P.M)Distance. Spindle to Column Surface (mm)Distance. Spindle to Table Surface (mm)Spindle Travel (mm)Table Travel (mm)Table Size(mm)Motor(KW)Overall Dimensions (mm)

5012025M16230-1825320

120400x230800X240.85-1.51000X970X1650

Order No. 199-7555Specification

Milling & Drilling Machines/MountsMilling & Drilling Machines/MountsMilling & Drilling Machines/MountsMilling & Drilling Machines/MountsMilling & Drilling Machines/Mounts

Milling & Drilling Machines

SpecificationWorktable size/mmTable travel/mmVertical travel/mmVertical milling capacity/mmFace milling capacity/mmDrilling capacity/mmLongitudinal feeds travel/mm/minVertical milling spindle travel/mmSpindle nose to worktable/mmTravel of movable arm/mmVertical milling spindle taperHorizontal milling spindle taperVerical milling spindle speed/rpm

Horizontal milling spindle speedrpmVertical milling motor/KWMain motor/KWOverall size/mmGW/kg

Order No. 199-7550800x240400x230380301205024-7201200-380300ISO40--6 steps: 120-1520rpm/8steps:115-1750rpm--0.85/1.5KW--1340x1200x2360mm900kgs

Order No. 199-7551900x250500x240380301205024-7201500-380300MT4--6 steps: 120-1520rpm/8steps:115-1750rpm--1.3/1.8KW--1340x1200x2360mm900kgs

Order No. 199-7552800x230400x230380301205024-7201200-380300ISO40ISO406 steps: 120-1520rpm/8steps:115-1750rpm230-1825rpm0.85/1.5KW2.2KW1340x1200x2360mm950kgs

Order No. 199-7553900x250500x240380301205024-7201500-380300MT4MT46 steps: 120-1520rpm/8steps:115-1750rpm65-1790rpm1.3/1.8KW1.5W1340x1200x2360mm950kgs

SpecificationWorktable size/mmTable travel/mmVertical travel/mmVertical milling capacity/mmFace milling capacity/mmDrilling capacity/mmLongitudinal feeds travel/mm/minVertical milling spindle travel/mmSpindle nose to worktable/mmTravel of movable arm/mmVertical milling spindle taperHorizontal milling spindle taperVerical milling spindle speed/rpm

Horizontal milling spindle speedrpmVertical milling motor/KWMain motor/KWOverall size/mmGW/kg


Saddle Moving Surface Grinder

Manual Surface Grinder

SpecificationMax width to be ground/mmMax length to be ground/mmMax height to be ground/mmTable size/mmMagnetic chuck size/mmMax longitudinal travel/mmMax cross travel/mmMax distance from spindlecenter to table surface/mmFeed of vertical handle per rev/mm per div/mmGrinding wheel size/mmSpindle speed/ rpmPower of spindle head/kWMax load cap./kgMachine weight/kgMachine overall size/mm

199-0110220470350210x450200x400500240

450

10.005200x13x31.753450(60Hz), 2850(50Hz)1.51288001330x1150x1675

199-0111220520350200x520200x450570250

450

20.005200x20x31.753450(60Hz), 2850(50Hz)1.514011201446x1391x1766

SpecificationTable size/mmTable Travel/mmMax distance from spindle center to tableMagnetic chuck sizeSpeed of table longitudinal movementTable transverse movement Auto feed Rapid speed Feed of handwheelWheelhead vertical movement Auto feed

Rapid feed

Feed of handwheel

Grinding wheel speedGrinding wheel sizeSpindle MotorHydraulic motorCooling pump motorElevating motorCross feed motorMax load cap.of tableTotal rated powerHeight of machineFloor spaceWeight

AH Model,Order No. 199-0112

AHR Model,Order No.199-0113

AHD Model,Order No.199-0114

Extra tough rigid design,Solid rubber base, Finest quality.Extra tough support screw,Supplied with bolt nut and washer.

MountDia. x Height1-37/64x19/32" (40x15mm)3-5/32x63/64" (80x25mm)3-5/32x63/64" (80x25mm)3-5/32x63/64" (80x25mm)4-23/32x1-17/64" (120x32mm)4-23/32x1-17/64" (120x32mm)4-23/32x1-17/64" (120x32mm)4-23/32x1-17/64" (120x32mm)6-19/64x1-3/8" (160x35mm)6-19/64x1-3/8" (160x35mm)6-19/64x1-3/8" (160x35mm)6-19/64x1-3/8" (160x35mm)7-9/32x1-17/32" (185x39mm)7-9/32x1-17/32" (185x39mm)7-9/32x1-17/32" (185x39mm)9x2-1/8" (228x54mm)9x2-1/8" (228x54mm)9x2-1/8" (228x54mm)12-13/32x2-3/4" (315x70mm)12-13/32x2-3/4" (315x70mm)

RubberHardness(ShoreA)5050607050607080506070806070806070807080

MountDia. x Height2-31/64x11/16'’(63x17mm)2-31/64x11/16'’(63x17mm)3x25/32'’(76x20mm)3x25/32'’(76x20mm)3-3/8x1'’(86x25mm)3-3/8x1'’(86x25mm)4-21/64x1-7/64'’(110x28mm)4-21/64x1-7/64'’(110x28mm)5x1-3/16'’(127x30mm)5x1-3/16'’(127x30mm)5-29/32x1-19/64'’(150x33mm)5-29/32x1-19/64'’(150x33mm)6-3/4x1-3/8'’(171x35mm)6-3/4x1-3/8'’(171x35mm)

LoadCapacity 180lbs 180lbs 300lbs 300lbs 700lbs 700lbs 1200lbs 1200lbs 2000lbs 2000lbs 3300lbs 3300lbs 4500lbs 4500lbs

Bolt M10x80 M10x110 M12x100 M12x130 M12x100 M12x130 M16x120 M16x180 M16x120 M16x180 M16x160 M16x180 M16x160 M16x180

Order No.429-2005429-2006429-2010429-2011429-2015429-2016429-2020429-2021429-2025429-2026429-2030429-2031429-2035429-2036

Designed for light duty metalcutting machines and textile, food, wood process machines etc. Feature long range height adjustment.

AdjustHeight5mm8mm8mm8mm12mm12mm12mm12mm12mm12mm12mm12mm12mm12mm12mm12mm12mm12mm12mm12mm

AdjustHeight15mm15mm20mm20mm20mm20mm25mm25mm25mm25mm25mm25mm25mm25mm

Shock Proof Machine Mounts

Shock Proof Machine MountsLight Duty

Heavy Duty

LoadCapacity55lbs220lbs380lbs550lbs880lbs1220lbs1880lbs2650lbs2200lbs4190lbs5300lbs7720lbs4850lbs6840lbs9260lbs7280lbs9480lbs14330lbs16840lbs20950lbs

BoltM5x30M10x80M10x80M10x80M12x100M12x100M12x100M12x100M16x120M16x120M16x120M16x120M20x160M20x160M20x160M24x180M24x180M24x180M30x200M30x200

Order No.429-1015429-1025429-1026429-1027429-1035429-1036429-1037429-1038429-1045429-1046429-1047429-1048429-1056429-1057429-1058429-1066429-1067429-1068429-1077429-1078

250x500560x275450250x5007-25

0.1-89900.02

---(AH/AHR model)0.005/0.01-0.05 by 0.01(AHD model)---(AH model)460(AHR model)240(AHD model)0.0052850(60Hz), 3450(50Hz)200x20x31.752.20.750.04---(AH model)/0.25(AHR model)/0.5(AHD model)0.041803.716752300x16001800

Grinder and Machine MountsGrinder and Machine MountsGrinder and Machine MountsGrinder and Machine MountsGrinder and Machine Mounts


Size#80.35mm#791/64”.4mm#78.45mm#77.5mm#76#75.55mm#74.6mm#73#72.65mm#71.7mm#70#69.75mm#681/32”.8mm#67#66.85mm#65.9mm#64#63.95mm#62#611mm#60#591.05mm#58#571.1mm1.15mm#563/64”1.2mm1.25mm1.3mm

DecimalInches.0135.0138.0145.0156.0157.0160.0177.0180.0197.0200.0210.0217.0225.0236.0240.0250.0256.0260.0276.0280.0292.0295.0310.0312.0315.0320.0330.0335.0350.0354.0360.0370.0374.0380.0390.0394.0400.0410.0413.0420.0430.0433.0453.0465.0469.0472.0492.0512

Decimal EquiDecimal EquiDecimal EquiDecimal EquiDecimal Equivvvvvalents Charalents Charalents Charalents Charalents Charttttt

Decimal Equivalents Chart

Tap Drill Size(75% Prob.Thread)

Size#551.35mm#541.4mm1.45mm1.5mm#531.55mm1/16”1.6mm#521.65mm1.7mm#511.75mm#501.8mm1.85mm#491.9mm#481.95mm5/64”#472mm2.05mm#46#452.1mm2.15mm#442.2mm2.25mm#432.3mm2.35mm#423/32”2.4mm#412.45mm#402.5mm#39#382.6mm#372.7mm

DecimalInches.0520.0531.0550.0551.0571.0591.0595.0610.0625.0630.0635.0650.0669.0670.0689.0700.0709.0728.0730.0748.0760.0768.0781.0785.0787.0807.0810.0820.0827.0846.0860.0866.0886.0890.0906.0925.0935.0938.0945.0960.0965.0980.0984.0995.1015.1024.1040.1063

Size#362.75mm7/64”#352.8mm#34#332.9mm#323mm#313.1mm1/8”3.2mm3.25mm#303.3mm3.4mm#293.5mm#289/64”3.6mm#273.7mm#263.75mm#253.8mm#243.9mm#235/32”#224mm#21#204.1mm4.2mm#194.25mm4.3mm#1811/64”#174.4mm#164.5mm

DecimalInches.1065.1083.1094.1100.1102.1110.1130.1142.1160.1181.1200.1220.1250.1260.1280.1285.1299.1339.1360.1378.1405.1406.1417.1440.1457.1470.1476.1495.1496.1520.1535.1540.1562.1570.1575.1590.1610.1614.1654.1660.1673.1693.1695.1719.1730.1732.1770.1772

Size#154.6mm#14#134.7mm4.75mm3/16”4.8mm#12#114.9mm#10#95mm#85.1mm#713/64”#65.2mm#55.25mm5.3mm#45.4mm#35.5mm7/32”5.6mm#25.7mm5.75mm#15.8mm5.9mmA15/64”6mmB6.1mmC6.2mmD6.25mm6.3mmE1/4”6.4mm

DecimalInches.1800.1811.1820.1850.1850.1870.1875.1890.1890.1910.1929.1935.1960.1969.1990.2008.2010.2031.2040.2047.2055.2067.2087.2090.2126.2130.2165.2188.2205.2210.2244.2264.2280.2283.2323.2340.2344.2362.2380.2402.2420.2441.2460.2461.2480.2500.2500.2520

Size6.5mmF6.6mmG6.7mm17/64”6.75mmH6.8mm6.9mmI7mmJ7.1mmK9/32”7.2mm7.25mm7.3mmL7.4mmM7.5mm19/64”7.6mmN7.7mm7.75mm7.8mm7.9mm5/16”8mmO8.1mm8.2mmP8.25mm8.3mm21/64”8.4mmQ8.5mm8.6mmR8.7mm11/32”8.75mm8.8mm

DecimalInches.2559.2570.2598.2610.2638.2656.2657.2660.2677.2717.2720.2756.2770.2795.2810.2812.2835.2854.2874.2900.2913.2950.2953.2969.2992.3020.3031.3051.3071.3110.3125.3150.3160.3189.3228.3230.3248.3268.3281.3307.3320.3346.3386.3390.3425.3438.3445.3465

SizeS8.9mm9mmT9.1mm23/64”9.2mm9.25mm9.3mmU9.4mm9.5mm3/8”V9.6mm9.7mm9.75mm9.8mmW9.9mm25/64”10mmXY13/32”Z10.5mm27/64”11mm7/16”11.5mm29/64”15/32”12mm31/64”12.5mm1/2”13mm33/64”17/32”13.5mm35/64”14mm9/16”14.5mm37/64”15mm19/32”

DecimalInches.3480.3504.3542.3580.3583.3594.3622.3642.3661.3680.3701.3740.3750.3770.3780.3819.3839.3858.3860.3898.3906.3937.3970.4040.4062.4130.4134.4219.4331.4375.4528.4531.4688.4724.4844.4921.5000.5118.5156.5312.5315.5469.5512.5625.5709.5781.5906.5938

Size39/64”15.5mm5/8”16mm41/64”16.5mm21/32”17mm43/64”11/16”17.5mm45/64”18mm23/32”18.5mm47/64”19mm3/4”49/64”19.5mm25/32”20mm51/64”20.5mm13/16”21mm53/64”27/32”21.5mm55/64”22mm7/8”22.5mm57/64”23mm29/32”59/64”23.5mm15/16”24mm61/64”24.531/32”25mm63/64”1”

DecimalInches.6094.6102.6250.6299.6409.6496.6562.6693.6719.6875.6890.7031.7087.7188.7283.7344.7480.7500.7656.7677.7812.7874.7969.8071.8125.8268.8281.8438.8465.8594.8661.8750.8858.8906.9055.9062.9219.9252.9375.9449.9531.9646.9688.9843.98441.0000

TapSize0-80M1.6x.351-64M2x.41-722-562-64M2.5x.453-483-564-404-48M3x.55-405-44M3.5x.66-326-40M4x.78-328-3610-24

DrillSize3/641.25mm1/161/165251502.05mm5/644643424039373336333.25mm292925

TapSize10-32M5x.812-2412-28M6x11/4-201/4-285/16-185/16-24M8x1.253/8-163/8-24M10x1.57/16-147/16-20M12x1.751/2-131/2-20M14x29/16-129/16-185/8-11

DrillSize214.2mm17151083FI6.7mm5/16Q8.4mmUW13/3227/6429/6415/3231/6433/6417/32

TapSize5/8-18M16x23/4-103/4-16M20x2.57/8-97/8-14M24x31-81-121-141-1/8-71-1/8-12M30x3.51-1/4-71-1/4-121-3/8-61-3/8-12M36x41-1/2-61-1/2-12

DrillSize37/6435/6421/3211/1611/1649/6413/1653/647/859/6415/1663/641-3/641-3/64*1-7/64*1-11/64*1-7/32*1-19/64*1-1/4*1-11/32*1-27/64*

* Reaming Recommended.

Rollform Tap Drill Size(65% Prob.Thread)TapSize0-80M1.6x.351-64M2x.41-722-562-64M2.5x.453-483-564-404-48M3x.55-40

DrillSize541.45mm1.65mm1.85mm1.7mm5/642mm2.30mm432.30mm392.6mm3533

TapSize5-44M3.5x.66-326-40M4x.78-328-3610-2410-32M5x.812-2412-28M6x11/4-20

DrillSize2.9mm301/83.2mm3.7mm252411/6416145mm85.5mm1

TapSize1/4-285/16-185/16-24M8x1.253/8-163/8-24M10x1.57/16-147/16-20M12x1.751/2-131/2-20M14x29/16-12

DrillSizeA7.3mmM7.4mmST9.3mm13/3210.5mm7/1615/3231/6413mm17/32

TapSize9/16-185/8-115/8-18M16x23/4-103/4-16M20x2.57/8-97/8-141-81-12

DrillSize13.5mm15mm19/3215mm45/6423/3218.75mm.82327/3215/16.963

Pipe Tap Drill SizeTapSize1/8-271/4-183/8-181/2-143/4-141-11-1/21-1/4-11-1/21-1/2-11-1/22-11-1/22-1/2-83-8

Drill SizeNPT(Taper)R7/1637/6445/6459/641-5/321-1/21-47/642-7/322-5/83-1/4

DecimalEquivalent.3390.4375.5781.7031.92191.15621.50001.73442.21882.62503.2500

Drill SizeNPS(Straight)11/327/1637/6423/3259/641-5/321-1/21-3/42-7/322-2/32

DecimalEquivalent.3438.4375.5781.7188.91291.15621.50001.75002.21882.6562

Catalog No.901CCatalog No.901C

Best Industrial Supply Co., Ltd

Phone +86-532-8896-8160

Fax +86-532-88968162

Email [email protected]

www.chinabestools.com

Workholding Tools Shop Supplies Machinery www.chinabestools.com

Catalog

Catalog - 010期正版香港挂牌 ... · Manual Hoists Geared Trolleies and ... Phone...

Documents

Transcript of Catalog - 010期正版香港挂牌 ... · Manual Hoists Geared Trolleies and ... Phone...