CAT M5

1
ELMEX CONTROLS PVT. LTD. ELMEX ELECTRIC PVT. LTD. Rail Mounted Terminal Blocks : Melamine Range Of Terminals : Stud Type Terminal : CAT M5 Type of Connection Stud - Screw Driver Operated Insulating Material Melamine Terminal Pitch 13 mm ( 0.51 Inch) Terminal Width 46 mm ( 1.79 Inch) Terminal Height 42 mm ( 1.64 Inch) Rated Cross Section 16 sq mm Wire Stripping Length -- mm Screw Size M5 Connection Possibility Stranded wire Max : 16 sq mm Min : 2.5 sq mm Solid wire Max : 16 sq mm Min : 2.5 sq mm Ratings IEC Voltage 800 V Current 76 A Conductor Size 16 sq mm Tightening Torque 2 Nm Terminal Accessories End Plate EPS4 Protection Cover PCCM26, PCCM39, PCC3 End Clamp SCS, SCSN, SCUN, SCUSL, SCUDD Comb-type Shorting Link ADSL - 2W, ADSLR-2W Marking Label LABEL KN8 Group Marking Carrier SCUNMLH, GMC Terminal Colours KHAKHI, RED, YELLOW, BLUE, BLACK Mounting Channel CHS10, CHS3, CHS5 * Technical specifications may change in line with technical advances and industry standards.

description

elmex

Transcript of CAT M5

  • ELMEX CONTROLS PVT. LTD.ELMEX ELECTRIC PVT. LTD.

    Rail Mounted Terminal Blocks : Melamine Range Of Terminals : Stud Type Terminal : CAT M5

    Type of Connection Stud - Screw Driver Operated Insulating Material Melamine Terminal Pitch 13 mm ( 0.51 Inch) Terminal Width 46 mm ( 1.79 Inch) Terminal Height 42 mm ( 1.64 Inch) Rated Cross Section 16 sq mm Wire Stripping Length -- mm Screw Size M5

    Connection Possibility

    Stranded wire Max : 16 sq mm Min : 2.5 sq mm

    Solid wire Max : 16 sq mm Min : 2.5 sq mm

    Ratings IEC Voltage 800 V

    Current 76 A

    Conductor Size 16 sq mm

    Tightening Torque 2 Nm

    Terminal Accessories

    End Plate EPS4

    Protection Cover PCCM26, PCCM39, PCC3

    End Clamp SCS, SCSN, SCUN, SCUSL, SCUDD

    Comb-type Shorting Link ADSL - 2W, ADSLR-2W

    Marking Label LABEL KN8

    Group Marking Carrier SCUNMLH, GMC

    Terminal Colours KHAKHI, RED, YELLOW, BLUE, BLACK

    Mounting Channel CHS10, CHS3, CHS5

    * Technical specifications may change in line with technical advances and industry standards.