5483-F07M-HVL54-45 44th Street, Maspeth NY 11378 toll: 800.622.LOCK local: 718.392.9000 fax: 718.392.8944 www.securitech.com

DescriptionA Four-Point (3 moving bolts, 1 fixed) Lock that is concealed inside the door. Benefits of Locking Method 1. Vertically deadbolts into the top of door frame 2. Mortise lock body with latch & deadbolt 3. HOVE horizontal deadbolt 4. Fixed Hinge Side Bolt

The exterior trim is a stainless steel breakaway pull handle with plate with mortise cylinder. The cylinder is protected by a steel cap. Best IC cylinder(by others, requires the use of a C258 Cam)

The interior uses a lever trim assembly with a turnpiece.

Operation - to retract bolts simultaneously:Exterior - Insert the key, turn and pull the handle.

Interior - Panic Proof Lever; Rotating lever always retracts bolts

Door Specification and Preparation1. Vertically-stiffened Hollow Metal door is recommended for strength. 2. 1-1/4” x 8” Mortise opening (see template TMP 5483-F07M)

3. U-channel on top for elevated edge plate and lock side Hove pocket prep. (HOVE = HVL) (see template TMP 5XXXDB-HM-HD-HVL)

4. Hinge side bolt is NOT connected to the lock mechanism.

Frame Preparation1. Mortise 4-7/8” strike standard. 2. Holes for deadbolts to be drilled in field.3. Other strike plates are not required.

Door HandingOrder LH, RH, LHR or RHR.

= Hollow Metal= U-Channel

HMU

Door Styles

EXTERIOR VIEW of LH/LHR Door

1

2

3

4

Mortise Lock BodyANSI Function 07 Modified

with CVO Arm

Interior Escutcheonwith Thumbturn

Exterior Pull Platewith Cylinder Holeand Best Cylinder

Protector

Upper Vertical Rod and Bolt

Lower Hove Deadbolt Module