casting processes 1(modif)fkm.utm.my/~zulkepli/notescast/casting_lec2.pdf · · 2005-08-15Lecture...
Transcript of casting processes 1(modif)fkm.utm.my/~zulkepli/notescast/casting_lec2.pdf · · 2005-08-15Lecture...
1
CASTING PROCESSES I
Lecture Notesby
Zulkepli Muhamad
Solidification Processes
Starting work material is either a liquid or is in a highly plastic condition, and a part is created through solidification of the materialSolidification processes can be classified according to engineering material processed:
MetalsCeramics, specifically glassesPolymers and polymer matrix composites (PMCs)
2
Classification of solidification processes
Classification of casting processes
Metal casting processes Foundries
Expandable mold Permanent mold Single-crystal growing
CompositemoldSand
ShellExpandable patternPlasterCeramicinvestment
SlushPressureDieCentrifugalSqueezesemisolid
Single-crystal for microelectronicsSingle-crystal turbine bladeDirectional solidification
3
Casting Processes
1. Expendable mold processes – uses an expendable mold which must be destroyed to remove casting
Mold materials: sand, plaster, and similar materials, plus binders
2. Permanent mold processes – uses a permanent mold which can be used many times to produce many castings
Made of metal (or, less commonly, a ceramic refractory material
Overview of Casting Technology
Casting is usually performed in a foundry Foundry = factory equipped for making molds, melting and handling molten metal, performing the casting process, and cleaning the finished castingWorkers who perform casting are called foundrymen
4
Casting
Process in which molten metal flows by gravity or other force into a mold where it solidifies in the shape of the mold cavityThe term casting also applies to the part made in the processSteps in casting seem simple: 1. Prepare mould/die2. Melt the metal3. Pouring melt into a mould/die4. Let it solidify5. Finishing processes
Metal casting components
5
Metal casting components
Metal casting components
6
Production steps
Mold
Molding
Sand
Melting Pouring Casting Heat treatment Finishing
Pattern makingCore MakingGating system
Furnaces Solidification ShakeoutRemoval of risersand gates
Cleaning &Inspection-additioanl heattreatment-defects-dimensions
Why Castings ?
7
Capabilities and Advantages of Casting
Can create complex part geometriesCan create both external and internal shapesSome casting processes are net shape;others are near net shapeCan produce very large parts Some casting methods are suited to mass production
Parts Made by Casting
Big parts: engine blocks and heads for automotive vehicles, wood burning stoves, machine frames, railway wheels, pipes, church bells, big statues, and pump housings Small parts: dental crowns, jewelry, small statues, and frying pans All varieties of metals can be cast, ferrous and nonferrous
8
Sand Casting process
680 Kg Compressor Frame
9
10
Sand mould
Sand mould
11
Sand Moulding Processes
Sand Moulding Processes (cont.)
12
Sand Moulding Processes (cont.)
Two forms of mold: (a) open mold, simply a container in the shape of the desired part;
and (b) closed mold, in which the mold geometry is more complex and requires a
gating system (passageway) leading into the cavity
13
The Pattern
A full-sized model of the part, slightly enlarged to account for shrinkage and machining allowances in the castingPattern materials:
Wood - common material because it is easy to work, but it warps Metal - more expensive to make, but lasts much longer Plastic - compromise between wood and metal
Types of patterns used in sand casting: (a) solid pattern(b) split pattern(c) match-plate pattern(d) cope and drag pattern
14
15
The CoreFull-scale model of interior surfaces of part
It is inserted into the mold cavity prior to pouringThe molten metal flows and solidifies between the mold cavity and the core to form the casting's external and internal surfaces May require supports to hold it in position in the mold cavity during pouring, called chaplets
Core held in place in the mold cavity by chaplets
(b) possible chaplet design(c) casting with internal cavity
16
Sand Casting - Process variations
Green sand casting: the most common and the cheapest. Associated problems are that the mould has low strength and high moisture content.Dry sand: core boxes are used instead of
patterns. Expensive and time consuming.Skin-dried sand: the mould is dried to a
certain depth. Used in the casting of steels.
Sand Casting - Economic considerations
Production rates of 1-60 pieces/hour, but dependent on size.Lead time ranges from days to several weeks
depending on complexity and size of casting.Material utilization is low to moderate - 20-50% of material lost in runners and risers.Both mould material and runners and risers may
he recycled.Patterns are easy to make and set, and are
reusable.
17
Sand Casting-Economic considerations
Pattern material dependent on the number of castings required. Easy to change design during production. Economical for low production runs. Can be used for one-offs. Tooling costs are low. Equipment costs are low. Direct labour costs are moderate to high. Can be labour intensive. Finishing costs can be high. Cleaning and fettling are important before secondary processing.
Process Parameters
18
Pouring
Desirable Mold Properties and Characteristics
Strength - to maintain shape and resist erosion Permeability - to allow hot air and gases to pass through voids in sand Thermal stability - to resist cracking on contact with molten metal Collapsibility - ability to give way and allow casting to shrink without cracking the casting Reusability - can sand from broken mold be reused to make other molds?
19
SandsThe sands used may be one of the following
categories;naturally bonded (bank) - less expensive synthetic (lake) - this sand can have a variety of controlled compositions.
Types of sand include,Zircon (ZrSiO4) - low thermal expansion Olivine (Mg2SiO4) - low thermal expansion Iron Silicate (Fe2SiO4) - low thermal expansion Chromite (FeCr2O4) - high heat transfer
Foundry SandsSilica (SiO2) or silica mixed with other minerals
Good refractory properties - capacity to endure high temperatures Small grain size yields better surface finish on the cast part Large grain size is more permeable, to allow escape of gases during pouring Irregular grain shapes tend to strengthen molds due to interlocking, compared to round grains
Disadvantage: interlocking tends to reduce permeability
20
Types of Sand Mold
Green-sand molds - mixture of sand, clay, and water;
“Green" means mold contains moisture at time of pouring
Dry-sand mold - organic binders rather than clay and mold is baked to improve strength Skin-dried mold - drying mold cavity surface of a green-sand mold to a depth of 10 to 25 mm, using torches or heating lamps
Other Expendable Mold Casting Processes
Shell MoldingVacuum MoldingExpanded Polystyrene ProcessInvestment CastingPlaster Mold and Ceramic Mold Casting