Cast Iron Bollards - ESICast Iron Bollards - Information Overview Architectural Street Furnishings...
Transcript of Cast Iron Bollards - ESICast Iron Bollards - Information Overview Architectural Street Furnishings...
Cast Iron Bollards - Information
OverviewArchitectural Street Furnishings are part of a group of UK based companies that comprises ASF, WB White Foundry and SG Castings. This gives ASF complete control over all cast iron products. The group of companies specialise in all elements of engineering and architectural metalwork, ranging from simple castings and fabrications to high end, precision engineering projects.
Environmental InformationAll ASF Cast Iron Bollards are manufactured from 100% recycled materials - recycling is done on site in our own recycling plant. Cast iron is in itself extremely long lasting and durable, in normal use a cast iron bollard is expected to last in excess of 100 years. Cast iron can also be recycled indefinitely with absolutely no loss in property. The combination of this incredible lifespan and it’s complete recyclability makes it a very sustainable material.
ASF cast iron bollards manufacturing journey, from raw material to finished product, is a matter of metres as it is all done on a single manufacturing site, so the products need only transport miles on their carbon imprint.
The major by-product output from the process of casting is iron oxide which actually has a beneficial environmental impact, encouraging green growth in plants and increasing the oxygen output of seas, thus reducing greenhouse gasses.
Grades of Cast Iron
Standard Grade - engineering grade 250As standard, ASF Cast Iron Bollards are manufactured in engineering grade 250 cast iron (often higher). This grade is already much better in property than the necessary grade required for the manufacture of bollards, but as they are cast alongside high end engineering components they benefit from being manufactured from this material at the same time. Engineering grade 250 cast iron is an extremely long lasting and wear resistant material, that will, even if left unfinished and in its bare state, oxidise (turn orange) but not rust away, losing only a few microns in 100years. Once painted it should essentially last forever with minimum maintenance and repainting when necessary.
Ductile IronDuctile Iron is the common name for SG, or Spheroidal Graphite Iron - a group of materials with varying physical properties dependent on their grade. As its name suggests it has a higher level of ductility (potential elongation) than ordinary cast iron. This makes it more resistant to impact as it will behave in an elastic manner when struck. The manufacturing process is essentially the same as engineering grade 250 cast iron, but magnesium is added in the melting process. This acts as a flux that alters the molecular structure of the iron so instead of being made up of graphite flakes, it changes and is made up of graphite nodules - hence the name spheroidal graphite. This structure will not propagate a crack, hence giving ductility. Different grades offer different overall tensile strength and ductility combinations. ASF can manufacture bollards in any ductile grade, but the most common is grade 450/10, a very high and strong grade of iron that will sustain significant impacts without failure. Full structural calculations can be produced for individual projects if required, including blast resistance information if necessary.
www.asfco.co.uk [email protected] 01484 401414architectural street furnishingsA S F
485
175
145
102
5
110
GL
A S F architectural street furnishingswww.asfco.co.uk [email protected] 01484 401414
ASF 101Cast Iron Bollards |100% recycled, engineering grade 250 cast iron or any grade of ductile cast ironMaterial:
Standard Finish: Zinc rich primer and metal shield top coatBollards are available polyester powder coated. Embellishments, rings and features can be hand painted in a contrasting colour
Optional Finish:
Adaptations: Bollards supplied root fixed as standard, but can also be supplied removable or as fold down ASF 650 trough bollards
Reflective Bands: Reflective bands can be applied in white, red or yellowInternal thick walled steel sleeves can be used to provide additional ram raid resistanceRam Raid Options:Logos, embelms, coats of Arms etc. can be cast onto the side of the bollards on requestLogos / Coats of Arms:
1:15
125
140
230
100
0 3
00
185
GL
A S F architectural street furnishingswww.asfco.co.uk [email protected] 01484 401414
ASF 102Cast Iron Bollards |100% recycled, engineering grade 250 cast iron or any grade of ductile cast ironMaterial:
Standard Finish: Zinc rich primer and metal shield top coatBollards are available polyester powder coated. Embellishments, rings and features can be hand painted in a contrasting colour
Optional Finish:
Adaptations: Bollards supplied root fixed as standard, but can also be supplied removable or as fold down ASF 650 trough bollards
Reflective Bands: Reflective bands can be applied in white, red or yellowInternal thick walled steel sleeves can be used to provide additional ram raid resistanceRam Raid Options:Logos, embelms, coats of Arms etc. can be cast onto the side of the bollards on requestLogos / Coats of Arms:
1:15
95
135
55
180
805
2
65
GL
A S F architectural street furnishingswww.asfco.co.uk [email protected] 01484 401414
ASF 103Cast Iron Bollards |100% recycled, engineering grade 250 cast iron or any grade of ductile cast ironMaterial:
Standard Finish: Zinc rich primer and metal shield top coatBollards are available polyester powder coated. Embellishments, rings and features can be hand painted in a contrasting colour
Optional Finish:
Adaptations: Bollards supplied root fixed as standard, but can also be supplied removable or as fold down ASF 650 trough bollards
Reflective Bands: Reflective bands can be applied in white, red or yellowInternal thick walled steel sleeves can be used to provide additional ram raid resistanceRam Raid Options:Logos, embelms, coats of Arms etc. can be cast onto the side of the bollards on requestLogos / Coats of Arms:
1:10
130
175
360
1
000
175
GL
A S F architectural street furnishingswww.asfco.co.uk [email protected] 01484 401414
ASF 104Cast Iron Bollards |100% recycled, engineering grade 250 cast iron or any grade of ductile cast ironMaterial:
Standard Finish: Zinc rich primer and metal shield top coatBollards are available polyester powder coated. Embellishments, rings and features can be hand painted in a contrasting colour
Optional Finish:
Adaptations: Bollards supplied root fixed as standard, but can also be supplied removable or as fold down ASF 650 trough bollards
Reflective Bands: Reflective bands can be applied in white, red or yellowInternal thick walled steel sleeves can be used to provide additional ram raid resistanceRam Raid Options:Logos, embelms, coats of Arms etc. can be cast onto the side of the bollards on requestLogos / Coats of Arms:
1:10
200
470
1
050
GL
A S F architectural street furnishingswww.asfco.co.uk [email protected] 01484 401414
ASF 105Cast Iron Bollards |100% recycled, engineering grade 250 cast iron or any grade of ductile cast ironMaterial:
Standard Finish: Zinc rich primer and metal shield top coatBollards are available polyester powder coated. Embellishments, rings and features can be hand painted in a contrasting colour
Optional Finish:
Adaptations: Bollards supplied root fixed as standard, but can also be supplied removable or as fold down ASF 650 trough bollards
Reflective Bands: Reflective bands can be applied in white, red or yellowInternal thick walled steel sleeves can be used to provide additional ram raid resistanceRam Raid Options:Logos, embelms, coats of Arms etc. can be cast onto the side of the bollards on requestLogos / Coats of Arms:
1:15
120
360
8
00
GL
A S F architectural street furnishingswww.asfco.co.uk [email protected] 01484 401414
ASF 106Cast Iron Bollards |100% recycled, engineering grade 250 cast iron or any grade of ductile cast ironMaterial:
Standard Finish: Zinc rich primer and metal shield top coatBollards are available polyester powder coated. Embellishments, rings and features can be hand painted in a contrasting colour
Optional Finish:
Adaptations: Bollards supplied root fixed as standard, but can also be supplied removable or as fold down ASF 650 trough bollards
Reflective Bands: Reflective bands can be applied in white, red or yellowInternal thick walled steel sleeves can be used to provide additional ram raid resistanceRam Raid Options:Logos, embelms, coats of Arms etc. can be cast onto the side of the bollards on requestLogos / Coats of Arms:
1:10
130
105
100
85
300
9
40
120
135
100
75 125
GL
A S F architectural street furnishingswww.asfco.co.uk [email protected] 01484 401414
ASF 107Cast Iron Bollards |100% recycled, engineering grade 250 cast iron or any grade of ductile cast ironMaterial:
Standard Finish: Zinc rich primer and metal shield top coatBollards are available polyester powder coated. Embellishments, rings and features can be hand painted in a contrasting colour
Optional Finish:
Adaptations: Bollards supplied root fixed as standard, but can also be supplied removable or as fold down ASF 650 trough bollards
Reflective Bands: Reflective bands can be applied in white, red or yellowInternal thick walled steel sleeves can be used to provide additional ram raid resistanceRam Raid Options:Logos, embelms, coats of Arms etc. can be cast onto the side of the bollards on requestLogos / Coats of Arms:
1:10
330
1
050
GL
A S F architectural street furnishingswww.asfco.co.uk [email protected] 01484 401414
ASF 108Cast Iron Bollards |100% recycled, engineering grade 250 cast iron or any grade of ductile cast ironMaterial:
Standard Finish: Zinc rich primer and metal shield top coatBollards are available polyester powder coated. Embellishments, rings and features can be hand painted in a contrasting colour
Optional Finish:
Adaptations: Bollards supplied root fixed as standard, but can also be supplied removable or as fold down ASF 650 trough bollards
Reflective Bands: Reflective bands can be applied in white, red or yellowInternal thick walled steel sleeves can be used to provide additional ram raid resistanceRam Raid Options:Logos, embelms, coats of Arms etc. can be cast onto the side of the bollards on requestLogos / Coats of Arms:
1:15
165 375
1
005
GL
A S F architectural street furnishingswww.asfco.co.uk [email protected] 01484 401414
ASF 109Cast Iron Bollards |100% recycled, engineering grade 250 cast iron or any grade of ductile cast ironMaterial:
Standard Finish: Zinc rich primer and metal shield top coatBollards are available polyester powder coated. Embellishments, rings and features can be hand painted in a contrasting colour
Optional Finish:
Adaptations: Bollards supplied root fixed as standard, but can also be supplied removable or as fold down ASF 650 trough bollards
Reflective Bands: Reflective bands can be applied in white, red or yellowInternal thick walled steel sleeves can be used to provide additional ram raid resistanceRam Raid Options:Logos, embelms, coats of Arms etc. can be cast onto the side of the bollards on requestLogos / Coats of Arms:
1:15
250 145
106
0 4
00
GL
A S F architectural street furnishingswww.asfco.co.uk [email protected] 01484 401414
ASF 110Cast Iron Bollards |100% recycled, engineering grade 250 cast iron or any grade of ductile cast ironMaterial:
Standard Finish: Zinc rich primer and metal shield top coatBollards are available polyester powder coated. Embellishments, rings and features can be hand painted in a contrasting colour
Optional Finish:
Adaptations: Bollards supplied root fixed as standard, but can also be supplied removable or as fold down ASF 650 trough bollards
Reflective Bands: Reflective bands can be applied in white, red or yellowInternal thick walled steel sleeves can be used to provide additional ram raid resistanceRam Raid Options:Logos, embelms, coats of Arms etc. can be cast onto the side of the bollards on requestLogos / Coats of Arms:
1:15
320
.40
519
.60
GL
A S F architectural street furnishingswww.asfco.co.uk [email protected] 01484 401414
ASF 111Cast Iron Bollards |100% recycled, engineering grade 250 cast iron or any grade of ductile cast ironMaterial:
Standard Finish: Zinc rich primer and metal shield top coatBollards are available polyester powder coated. Embellishments, rings and features can be hand painted in a contrasting colour
Optional Finish:
Adaptations: Bollards supplied root fixed as standard, but can also be supplied removable or as fold down ASF 650 trough bollards
Reflective Bands: Reflective bands can be applied in white, red or yellowInternal thick walled steel sleeves can be used to provide additional ram raid resistanceRam Raid Options:Logos, embelms, coats of Arms etc. can be cast onto the side of the bollards on requestLogos / Coats of Arms:
1:10
240
2
95
GL
A S F architectural street furnishingswww.asfco.co.uk [email protected] 01484 401414
ASF 112Cast Iron Bollards |100% recycled, engineering grade 250 cast iron or any grade of ductile cast ironMaterial:
Standard Finish: Zinc rich primer and metal shield top coatBollards are available polyester powder coated. Embellishments, rings and features can be hand painted in a contrasting colour
Optional Finish:
Adaptations: Bollards supplied root fixed as standard, but can also be supplied removable or as fold down ASF 650 trough bollards
Reflective Bands: Reflective bands can be applied in white, red or yellowInternal thick walled steel sleeves can be used to provide additional ram raid resistanceRam Raid Options:Logos, embelms, coats of Arms etc. can be cast onto the side of the bollards on requestLogos / Coats of Arms:
1:10
115mm
125mm
430
7
60
GL
A S F architectural street furnishingswww.asfco.co.uk [email protected] 01484 401414
ASF 113Cast Iron Bollards |100% recycled, engineering grade 250 cast iron or any grade of ductile cast ironMaterial:
Standard Finish: Zinc rich primer and metal shield top coatBollards are available polyester powder coated. Embellishments, rings and features can be hand painted in a contrasting colour
Optional Finish:
Adaptations: Bollards supplied root fixed as standard, but can also be supplied removable or as fold down ASF 650 trough bollards
Reflective Bands: Reflective bands can be applied in white, red or yellowInternal thick walled steel sleeves can be used to provide additional ram raid resistanceRam Raid Options:Logos, embelms, coats of Arms etc. can be cast onto the side of the bollards on requestLogos / Coats of Arms:
1:10
180
325
9
20
GL
A S F architectural street furnishingswww.asfco.co.uk [email protected] 01484 401414
ASF 114Cast Iron Bollards |100% recycled, engineering grade 250 cast iron or any grade of ductile cast ironMaterial:
Standard Finish: Zinc rich primer and metal shield top coatBollards are available polyester powder coated. Embellishments, rings and features can be hand painted in a contrasting colour
Optional Finish:
Adaptations: Bollards supplied root fixed as standard, but can also be supplied removable or as fold down ASF 650 trough bollards
Reflective Bands: Reflective bands can be applied in white, red or yellowInternal thick walled steel sleeves can be used to provide additional ram raid resistanceRam Raid Options:Logos, embelms, coats of Arms etc. can be cast onto the side of the bollards on requestLogos / Coats of Arms:
1:10
175
300
1
015
GL
A S F architectural street furnishingswww.asfco.co.uk [email protected] 01484 401414
ASF 115Cast Iron Bollards |100% recycled, engineering grade 250 cast iron or any grade of ductile cast ironMaterial:
Standard Finish: Zinc rich primer and metal shield top coatBollards are available polyester powder coated. Embellishments, rings and features can be hand painted in a contrasting colour
Optional Finish:
Adaptations: Bollards supplied root fixed as standard, but can also be supplied removable or as fold down ASF 650 trough bollards
Reflective Bands: Reflective bands can be applied in white, red or yellowInternal thick walled steel sleeves can be used to provide additional ram raid resistanceRam Raid Options:Logos, embelms, coats of Arms etc. can be cast onto the side of the bollards on requestLogos / Coats of Arms:
1:10
100
0 3
00
200
GL
A S F architectural street furnishingswww.asfco.co.uk [email protected] 01484 401414
ASF 116Cast Iron Bollards |100% recycled, engineering grade 250 cast iron or any grade of ductile cast ironMaterial:
Standard Finish: Zinc rich primer and metal shield top coatBollards are available polyester powder coated. Embellishments, rings and features can be hand painted in a contrasting colour
Optional Finish:
Adaptations: Bollards supplied root fixed as standard, but can also be supplied removable or as fold down ASF 650 trough bollards
Reflective Bands: Reflective bands can be applied in white, red or yellowInternal thick walled steel sleeves can be used to provide additional ram raid resistanceRam Raid Options:Logos, embelms, coats of Arms etc. can be cast onto the side of the bollards on requestLogos / Coats of Arms:
1:10
150mm
100
0 4
00
GL
A S F architectural street furnishingswww.asfco.co.uk [email protected] 01484 401414
ASF 117Cast Iron Bollards |100% recycled, engineering grade 250 cast iron or any grade of ductile cast ironMaterial:
Standard Finish: Zinc rich primer and metal shield top coatBollards are available polyester powder coated. Embellishments, rings and features can be hand painted in a contrasting colour
Optional Finish:
Adaptations: Bollards supplied root fixed as standard, but can also be supplied removable or as fold down ASF 650 trough bollards
Reflective Bands: Reflective bands can be applied in white, red or yellowInternal thick walled steel sleeves can be used to provide additional ram raid resistanceRam Raid Options:Logos, embelms, coats of Arms etc. can be cast onto the side of the bollards on requestLogos / Coats of Arms:
1:10
400
1
000
GL
A S F architectural street furnishingswww.asfco.co.uk [email protected] 01484 401414
ASF 118Cast Iron Bollards |100% recycled, engineering grade 250 cast iron or any grade of ductile cast ironMaterial:
Standard Finish: Zinc rich primer and metal shield top coatBollards are available polyester powder coated. Embellishments, rings and features can be hand painted in a contrasting colour
Optional Finish:
Adaptations: Bollards supplied root fixed as standard, but can also be supplied removable or as fold down ASF 650 trough bollards
Reflective Bands: Reflective bands can be applied in white, red or yellowInternal thick walled steel sleeves can be used to provide additional ram raid resistanceRam Raid Options:Logos, embelms, coats of Arms etc. can be cast onto the side of the bollards on requestLogos / Coats of Arms:
1:10
195
150
400
1
000
GL
A S F architectural street furnishingswww.asfco.co.uk [email protected] 01484 401414
ASF 119Cast Iron Bollards |100% recycled, engineering grade 250 cast iron or any grade of ductile cast ironMaterial:
Standard Finish: Zinc rich primer and metal shield top coatBollards are available polyester powder coated. Embellishments, rings and features can be hand painted in a contrasting colour
Optional Finish:
Adaptations: Bollards supplied root fixed as standard, but can also be supplied removable or as fold down ASF 650 trough bollards
Reflective Bands: Reflective bands can be applied in white, red or yellowInternal thick walled steel sleeves can be used to provide additional ram raid resistanceRam Raid Options:Logos, embelms, coats of Arms etc. can be cast onto the side of the bollards on requestLogos / Coats of Arms:
1:10
250
9
50
GL
A S F architectural street furnishingswww.asfco.co.uk [email protected] 01484 401414
ASF 120Cast Iron Bollards |100% recycled, engineering grade 250 cast iron or any grade of ductile cast ironMaterial:
Standard Finish: Zinc rich primer and metal shield top coatBollards are available polyester powder coated. Embellishments, rings and features can be hand painted in a contrasting colour
Optional Finish:
Adaptations: Bollards supplied root fixed as standard, but can also be supplied removable or as fold down ASF 650 trough bollards
Reflective Bands: Reflective bands can be applied in white, red or yellowInternal thick walled steel sleeves can be used to provide additional ram raid resistanceRam Raid Options:Logos, embelms, coats of Arms etc. can be cast onto the side of the bollards on requestLogos / Coats of Arms:
1:10
170mm 300
9
50
GL
A S F architectural street furnishingswww.asfco.co.uk [email protected] 01484 401414
ASF 121Cast Iron Bollards |100% recycled, engineering grade 250 cast iron or any grade of ductile cast ironMaterial:
Standard Finish: Zinc rich primer and metal shield top coatBollards are available polyester powder coated. Embellishments, rings and features can be hand painted in a contrasting colour
Optional Finish:
Adaptations: Bollards supplied root fixed as standard, but can also be supplied removable or as fold down ASF 650 trough bollards
Reflective Bands: Reflective bands can be applied in white, red or yellowInternal thick walled steel sleeves can be used to provide additional ram raid resistanceRam Raid Options:Logos, embelms, coats of Arms etc. can be cast onto the side of the bollards on requestLogos / Coats of Arms:
1:10
200
300
9
00
GL
A S F architectural street furnishingswww.asfco.co.uk [email protected] 01484 401414
ASF 122Cast Iron Bollards |100% recycled, engineering grade 250 cast iron or any grade of ductile cast ironMaterial:
Standard Finish: Zinc rich primer and metal shield top coatBollards are available polyester powder coated. Embellishments, rings and features can be hand painted in a contrasting colour
Optional Finish:
Adaptations: Bollards supplied root fixed as standard, but can also be supplied removable or as fold down ASF 650 trough bollards
Reflective Bands: Reflective bands can be applied in white, red or yellowInternal thick walled steel sleeves can be used to provide additional ram raid resistanceRam Raid Options:Logos, embelms, coats of Arms etc. can be cast onto the side of the bollards on requestLogos / Coats of Arms:
1:10
300
9
00
200
GL
A S F architectural street furnishingswww.asfco.co.uk [email protected] 01484 401414
ASF 123Cast Iron Bollards |100% recycled, engineering grade 250 cast iron or any grade of ductile cast ironMaterial:
Standard Finish: Zinc rich primer and metal shield top coatBollards are available polyester powder coated. Embellishments, rings and features can be hand painted in a contrasting colour
Optional Finish:
Adaptations: Bollards supplied root fixed as standard, but can also be supplied removable or as fold down ASF 650 trough bollards
Reflective Bands: Reflective bands can be applied in white, red or yellowInternal thick walled steel sleeves can be used to provide additional ram raid resistanceRam Raid Options:Logos, embelms, coats of Arms etc. can be cast onto the side of the bollards on requestLogos / Coats of Arms:
1:10
125
175
300
1
000
GL
A S F architectural street furnishingswww.asfco.co.uk [email protected] 01484 401414
ASF 124Cast Iron Bollards |100% recycled, engineering grade 250 cast iron or any grade of ductile cast ironMaterial:
Standard Finish: Zinc rich primer and metal shield top coatBollards are available polyester powder coated. Embellishments, rings and features can be hand painted in a contrasting colour
Optional Finish:
Adaptations: Bollards supplied root fixed as standard, but can also be supplied removable or as fold down ASF 650 trough bollards
Reflective Bands: Reflective bands can be applied in white, red or yellowInternal thick walled steel sleeves can be used to provide additional ram raid resistanceRam Raid Options:Logos, embelms, coats of Arms etc. can be cast onto the side of the bollards on requestLogos / Coats of Arms:
1:10
170
300
1
000
GL
A S F architectural street furnishingswww.asfco.co.uk [email protected] 01484 401414
ASF 125Cast Iron Bollards |100% recycled, engineering grade 250 cast iron or any grade of ductile cast ironMaterial:
Standard Finish: Zinc rich primer and metal shield top coatBollards are available polyester powder coated. Embellishments, rings and features can be hand painted in a contrasting colour
Optional Finish:
Adaptations: Bollards supplied root fixed as standard, but can also be supplied removable or as fold down ASF 650 trough bollards
Reflective Bands: Reflective bands can be applied in white, red or yellowInternal thick walled steel sleeves can be used to provide additional ram raid resistanceRam Raid Options:Logos, embelms, coats of Arms etc. can be cast onto the side of the bollards on requestLogos / Coats of Arms:
1:10
180
300
9
80
GL
A S F architectural street furnishingswww.asfco.co.uk [email protected] 01484 401414
ASF 126Cast Iron Bollards |100% recycled, engineering grade 250 cast iron or any grade of ductile cast ironMaterial:
Standard Finish: Zinc rich primer and metal shield top coatBollards are available polyester powder coated. Embellishments, rings and features can be hand painted in a contrasting colour
Optional Finish:
Adaptations: Bollards supplied root fixed as standard, but can also be supplied removable or as fold down ASF 650 trough bollards
Reflective Bands: Reflective bands can be applied in white, red or yellowInternal thick walled steel sleeves can be used to provide additional ram raid resistanceRam Raid Options:Logos, embelms, coats of Arms etc. can be cast onto the side of the bollards on requestLogos / Coats of Arms:
1:10
450
1
50 GL
A S F architectural street furnishingswww.asfco.co.uk [email protected] 01484 401414
ASF 127Cast Iron Bollards |100% recycled, engineering grade 250 cast iron or any grade of ductile cast ironMaterial:
Standard Finish: Zinc rich primer and metal shield top coatBollards are available polyester powder coated. Embellishments, rings and features can be hand painted in a contrasting colour
Optional Finish:
Adaptations: Bollards supplied root fixed as standard, but can also be supplied removable or as fold down ASF 650 trough bollards
Reflective Bands: Reflective bands can be applied in white, red or yellowInternal thick walled steel sleeves can be used to provide additional ram raid resistanceRam Raid Options:Logos, embelms, coats of Arms etc. can be cast onto the side of the bollards on requestLogos / Coats of Arms:
1:10
400
1
000
GL
A S F architectural street furnishingswww.asfco.co.uk [email protected] 01484 401414
ASF 128Cast Iron Bollards |100% recycled, engineering grade 250 cast iron or any grade of ductile cast ironMaterial:
Standard Finish: Zinc rich primer and metal shield top coatBollards are available polyester powder coated. Embellishments, rings and features can be hand painted in a contrasting colour
Optional Finish:
Adaptations: Bollards supplied root fixed as standard, but can also be supplied removable or as fold down ASF 650 trough bollards
Reflective Bands: Reflective bands can be applied in white, red or yellowInternal thick walled steel sleeves can be used to provide additional ram raid resistanceRam Raid Options:Logos, embelms, coats of Arms etc. can be cast onto the side of the bollards on requestLogos / Coats of Arms:
1:10
300
1
50 GL
A S F architectural street furnishingswww.asfco.co.uk [email protected] 01484 401414
ASF 129Cast Iron Bollards |100% recycled, engineering grade 250 cast iron or any grade of ductile cast ironMaterial:
Standard Finish: Zinc rich primer and metal shield top coatBollards are available polyester powder coated. Embellishments, rings and features can be hand painted in a contrasting colour
Optional Finish:
Adaptations: Bollards supplied root fixed as standard, but can also be supplied removable or as fold down ASF 650 trough bollards
Reflective Bands: Reflective bands can be applied in white, red or yellowInternal thick walled steel sleeves can be used to provide additional ram raid resistanceRam Raid Options:Logos, embelms, coats of Arms etc. can be cast onto the side of the bollards on requestLogos / Coats of Arms:
1:10
150
6
00
GL
A S F architectural street furnishingswww.asfco.co.uk [email protected] 01484 401414
ASF 130Cast Iron Bollards |100% recycled, engineering grade 250 cast iron or any grade of ductile cast ironMaterial:
Standard Finish: Zinc rich primer and metal shield top coatBollards are available polyester powder coated. Embellishments, rings and features can be hand painted in a contrasting colour
Optional Finish:
Adaptations: Bollards supplied root fixed as standard, but can also be supplied removable or as fold down ASF 650 trough bollards
Reflective Bands: Reflective bands can be applied in white, red or yellowInternal thick walled steel sleeves can be used to provide additional ram raid resistanceRam Raid Options:Logos, embelms, coats of Arms etc. can be cast onto the side of the bollards on requestLogos / Coats of Arms:
1:10
300
8
30
100
GL
A S F architectural street furnishingswww.asfco.co.uk [email protected] 01484 401414
ASF 131Cast Iron Bollards |100% recycled, engineering grade 250 cast iron or any grade of ductile cast ironMaterial:
Standard Finish: Zinc rich primer and metal shield top coatBollards are available polyester powder coated. Embellishments, rings and features can be hand painted in a contrasting colour
Optional Finish:
Adaptations: Bollards supplied root fixed as standard, but can also be supplied removable or as fold down ASF 650 trough bollards
Reflective Bands: Reflective bands can be applied in white, red or yellowInternal thick walled steel sleeves can be used to provide additional ram raid resistanceRam Raid Options:Logos, embelms, coats of Arms etc. can be cast onto the side of the bollards on requestLogos / Coats of Arms:
1:10
300
1
000
150
GL
A S F architectural street furnishingswww.asfco.co.uk [email protected] 01484 401414
ASF 132Cast Iron Bollards |100% recycled, engineering grade 250 cast iron or any grade of ductile cast ironMaterial:
Standard Finish: Zinc rich primer and metal shield top coatBollards are available polyester powder coated. Embellishments, rings and features can be hand painted in a contrasting colour
Optional Finish:
Adaptations: Bollards supplied root fixed as standard, but can also be supplied removable or as fold down ASF 650 trough bollards
Reflective Bands: Reflective bands can be applied in white, red or yellowInternal thick walled steel sleeves can be used to provide additional ram raid resistanceRam Raid Options:Logos, embelms, coats of Arms etc. can be cast onto the side of the bollards on requestLogos / Coats of Arms:
1:10
125
110
0 3
00
GL
A S F architectural street furnishingswww.asfco.co.uk [email protected] 01484 401414
ASF 133Cast Iron Bollards |100% recycled, engineering grade 250 cast iron or any grade of ductile cast ironMaterial:
Standard Finish: Zinc rich primer and metal shield top coatBollards are available polyester powder coated. Embellishments, rings and features can be hand painted in a contrasting colour
Optional Finish:
Adaptations: Bollards supplied root fixed as standard, but can also be supplied removable or as fold down ASF 650 trough bollards
Reflective Bands: Reflective bands can be applied in white, red or yellowInternal thick walled steel sleeves can be used to provide additional ram raid resistanceRam Raid Options:Logos, embelms, coats of Arms etc. can be cast onto the side of the bollards on requestLogos / Coats of Arms:
1:10
300
1
100
GL
A S F architectural street furnishingswww.asfco.co.uk [email protected] 01484 401414
ASF 134Cast Iron Bollards |100% recycled, engineering grade 250 cast iron or any grade of ductile cast ironMaterial:
Standard Finish: Zinc rich primer and metal shield top coatBollards are available polyester powder coated. Embellishments, rings and features can be hand painted in a contrasting colour
Optional Finish:
Adaptations: Bollards supplied root fixed as standard, but can also be supplied removable or as fold down ASF 650 trough bollards
Reflective Bands: Reflective bands can be applied in white, red or yellowInternal thick walled steel sleeves can be used to provide additional ram raid resistanceRam Raid Options:Logos, embelms, coats of Arms etc. can be cast onto the side of the bollards on requestLogos / Coats of Arms:
1:10