Case Study - DRAX Ecostore Biomass Conversion - Kingfisher · Case Study - DRAX Ecostore Biomass...
1
Case Study - DRAX Ecostore Biomass Conversion Kingfisher were sub contracted the project worth a circa of £3m, to manufacture and install the dust emmision system and pneumatic trans- fer lines on the Drax Biomass Ecostore Project. Project included a full turnkey service provision consisting of: Design and fabrication of wear resistant • pneumatic conveying system, bridges, trestles & extraction ducting Confined space working • Onsite assembly of access platforms • Erection of gantries, bridges, trestles & pipe work • Kingfisher can undertake a 100% supply and erection of steel structures, fabrication , pipe work both (lined and unlined) utilising our owninternal resources and have demonstrated this at U.K. power stations over the last 20 years. Fully qualified to fabricate and manufacture steel structure’s to both ISO 3834 - 2 & ISO 1090 - 1 Protecting Industry Worldwide www.kingfisher-industrial.com
Transcript of Case Study - DRAX Ecostore Biomass Conversion - Kingfisher · Case Study - DRAX Ecostore Biomass...
Case Study - DRAX Ecostore Biomass Conversion
Kingfisher were sub contracted the project worth a circa of £3m, to manufacture and install the dust emmision system and pneumatic trans-fer lines on the Drax Biomass Ecostore Project.Project included a full turnkey service provision consisting of:
Design and fabrication of wear resistant • pneumatic conveying system, bridges, trestles & extraction ducting
Confined space working• Onsite assembly of access platforms• Erection of gantries, bridges, trestles & pipe work•
Kingfisher can undertake a 100% supply and erection of steel structures, fabrication , pipe work both (lined and unlined) utilising our owninternal resources and have demonstrated this at U.K. power stations over the last 20 years.
Fully qualified to fabricate and manufacture steel structure’s to both ISO 3834 - 2 & ISO 1090 - 1
Protecting Industry Worldwide
www.kingfisher-industrial.com
