Casava Cutting Machine LNC
-
Upload
eric-matlueang -
Category
Engineering
-
view
44 -
download
3
Transcript of Casava Cutting Machine LNC
INTRODUCTION
LITERATURE REVIEW
METHODOLOGY
RESULTS
Cassava Cutting MachineCassava Cutting Machine
Most of farmer in Loeng Nok Tha district are cassava farmers.
INTRODUCTIONINTRODUCTION
The cassava products are not enough for industry.
The cassavas are lost by mistaken cutting.
Objectives of the StudyObjectives of the Study
To design and build cassava cutting machine.
To study the effectiveness of cassava cutting machine.
To investigate farmers' satisfaction on cassava cutting machine.
LimitationLimitation
Using for cutting cassava.
Studying only from October 15 – November 1, 2014.
Trying out in farm at Loeng Nok Tha district.
Trying out by the farmers from Loeng Nok Tha district.
Literature ReviewLiterature Review
Basic of motor
Basic of rotating circular saw
Basic of transmission belt
Principle in cassava farming
Categories of cassava
METHODOLOGYMETHODOLOGY
Designed and built the machine.
Tried out for the working effectiveness.
Collected satisfaction by questionnaires
METHODOLOGYMETHODOLOGY
InstrumentInstrument
Satisfaction QuestionnaireSatisfaction Questionnaire
Experiment
RESULTS
Table 1: Straight angle
Table 2: Askew angle
Working effectiveness
Be able to cut the cassava in the same results by time and quantity of 90°, 30° and 45° angles for 2,400 pieces per 60 minutes.
Satisfaction in using machine
RESULTS
Satisfaction in using machine
The total level of satisfaction is at "high" level.
Straight 90
Askew 30
Askew 45
0 500 1000 1500 2000 2500
Time(sec.)
Quantity
Time(min.)
Quantity
Figure 1: The same results by time and quantity
THANK YOU FOR YOUR ATTENTION