Caroma Technical Manual
Transcript of Caroma Technical Manual
A World of Choice
Caroma International Pty Ltd. ABN 90 35 053 413 157 Copyright Caroma USA, Inc. 2007
About the Company
Caroma USA, Caroma International, and Caroma Dorf are subsidiaries of GWA International, an Australian publicly listed company specializing in the manufacture and supply of high-end, technologically advanced building products.
Since 1941, Caroma’s leading-edge innovation has produced beautifully designed, water efficient bathroom products. Uncompromising investment in research and development and a commitment to water conservation led Caroma to become the world’s first company to commercialize development and production of dual flush toilets. Over the past 25 years, this technology has set new standards in water conservation throughout the sanitaryware industry – significantly reducing water usage in commercial and domestic bathrooms.
Caroma's dedication to staying a leader in the marketplace
Caroma’s history of design and product leadership has been achieved by a total commitment to research and development in all areas of quality, aesthetics, and technical excellence. By constantly reviewing and updating the product range as the market or fashion dictates, Caroma continually provides the most comprehensive range of reliable, quality, and fashion coordinated bathroom products.
Environment
Caroma is acutely aware of the need to conserve the world's natural resources. Through the years, Caroma has pioneered a number of significant product developments – and introduced the first, truly effective, two button dual flush toilet. In 1993, the first 1.6/0.8 gallon (6/3 liter) dual flush toilet offering water saving benefits on a scale previously unavailable anywhere in the world was introduced.
Caroma continually develops products which minimize impact on the environment, including a 1.28/0.8 gallon (4.8/3 liter) dual flush toilet, a high efficiency urinal (0.13 gallons per flush), a waterless urinal, and a high efficiency dual flush toilet with integrated sink.
Caroma is a leading manufacturer of sanitaryware. An extensive range of designs and technologically advanced products are available for commercial projects, renovations, homes, and the export market.
Caroma Inc. — Technical Manual
Index
Caroma International Pty Ltd. ABN 90 35 053 413 157 Copyright Caroma USA, Inc. 2007
Section Title Page No.
1. Warranty Warranty 1.1
2. Toilets Tanks and Bowls
Adelaide Cube 270 Round Front Plus 2.1.1
Adelaide Cube 270 Easy Height Round Front Plus 2.1.2
Adelaide Standard 270 Round Front Plus 2.1.3
Adelaide Standard 270 Easy Height Round Front Plus 2.1.4
Bondi 270 Round Front Plus 2.2.1
Bondi 270 Easy Height Round Front Plus 2.2.2
Bondi 270 Elongated 2.2.3
Bondi 270 Easy Height Elongated 2.2.4
Bondi 305 Round Front Plus 2.2.5
Bondi 305 Elongated 2.2.6
Brisbane 270 Round Front Plus 2.3.1
Caravelle 270 Round Front Plus 2.4.1
Caravelle 270 Easy Height Round Front Plus 2.4.2
Caravelle 270 Elongated 2.4.3
Caravelle 270 Easy Height Elongated 2.4.4
Caravelle 305 Round Front Plus 2.4.5
Caravelle 305 Elongated 2.4.6
Caravelle One Piece Round Front Plus 2.5.1
Caravelle One Piece Easy Height Round Front Plus 2.5.2
Colonial 270 Round Front Plus 2.6.1
Colonial 270 Easy Height Round Front Plus 2.6.2
Profile Smart 305 Round Front Plus
Royale 270 Round Front Plus 2.7.1
Royale 270 Easy Height Round Front Plus 2.7.2
Royale 270 Elongated 2.7.3
Royale 270 Easy Height Elongated 2.7.4
Royale 305 Round Front Plus 2.7.5
Royale 305 Elongated 2.7.6
Sydney Low Profile 270 Round Front Plus 2.8.1
Sydney Low Profile 270 Easy Height Round Front Plus 2.8.2
Sydney Low Profile 270 Elongated 2.8.3
Sydney Low Profile 270 Easy Height Elongated 2.8.4
Sydney Low Profile 305 Round Front Plus 2.8.5
Sydney Low Profile 305 Elongated 2.8.6
Section Title Page No.
Sydney Smart 270 Round Front Plus 2.8.7
Sydney Smart 270 Easy Height Round Front Plus 2.8.8
Sydney Smart 270 Elongated 2.8.9
Sydney Smart 270 Easy Height Elongated 2.8.10
Sydney Smart 305 Round Front Plus 2.8.11
Sydney Smart 305 Elongated 2.8.12
Sydney Smart Back Outlet
Walvit Wall Hung Round Front Plus 2.9.1
Walvit Wall Hung Elongated 2.9.2
3. Spare PartsDiagrams
Adelaide Cube 3.1
Adelaide Standard 3.2
Bondi 3.3
Brisbane 3.4
Caravelle two piece 3.5
Caravelle one piece 3.6
Colonial 3.7
Royale 3.8
Sydney 3.9
Sydney Low Profile 3.10
Sydney Smart 3.11
4. Lavatories/SinksSemi-Recessed
Brisbane 4.1
Leda Vasque 4.2
Liano 4.3
5. Lavatories/Sinks Self-Rimming
Liano 5.1
6. Lavatories/SinksUnder Counter
Liano 6.1
7. Lavatories/SinksWall Mount and Pedestal
Adelaide 7.1
Brisbane 400 7.2
Brisbane 500 7.3
Liano 7.4
8. Lavatories/SinksAbove Counter and Inset
Adelaide – Above Counter and Inset 8.1
Brisbane Above Counter 8.2
Leda Vasque Above Counter 8.3
Leda Vasque Inset 8.4
Liano Above Counter 8.5
9. Urinals Cube3 Ultra 9.1
H2Zero Waterless 9.2
Caroma International Pty Ltd. ABN 90 35 053 413 157
Guarantee of Product — North America 1.1
Caroma International Pty Ltd. ABN 90 35 053 413 157 Guarantee of Product — USA
Caroma guarantees its product for a period of 2 years (24 months) as follows:
1. Caroma Industries products are covered by warranty for materials and workmanship only (subject to any province or state laws). Caroma shall not be liable for any loss, damage, expense or inconvenience of any kind incurred, sustained, or suffered by any purchaser as a result of any defect or default in the Caroma product to which this warranty relates. In particular (but not as to affect the generality of the foregoing), Caroma shall not be liable for any loss, damage, expense, or inconvenience arising from:
a. the faulty installation of this Caroma product;
b. the combination, integration, or operation of this Caroma product with product not manufactured by Caroma, for the purpose of forming a w.c. suite;
c. where goods are used or adapted for a purpose for which they are not designed.
2. Caroma shall not be liable to replace any defective or faulty goods pursuant to Clause 1 of this warranty unless the purchaser proves to the satisfaction of Caroma that the goods were defective or faulty at the time when delivery was taken of them. Proof of purchase will be required prior to inspection.
3. No warranty condition, description or representation on the part of Caroma is given or implied by this After Sales and Service Information Sheet and any warranty condition description or representation as the state of quality or fitness for any purpose of the goods, whether expressed or implied by virtue, is hereby expressly excluded.
4. Statutory rights may vary from state to state or from province to province, in which case this warranty will not affect such statutory rights.
5. Should service be required, it is requested that a claim be made through the dealer or contractor from where the product was purchased.
Yours faithfully,Caroma Industries Ltd.
Section 02
ToiletsTanks and Bowls
�-�������� ������ ��� ��� & ������
CI/SfB(74.1) g3
DateOctober 2008
Supersedes all previous issues
2.1.1Adelaide Cube 270 Round Front Plus 1.6/0.8 gpf (6/3 l) Water Saving Dual Flush High Effi ciency Toilet (HET)
Two Piece Ultra Low Flush (ULF) Vitreous China Washdown Toilet
Caroma International Pty Ltd. ABN 90 35 053 413 157
Adelaide Cube 270 Round Front Plus 1.6/0.8 gpf (6/3 l) Dual Flush HET
Two Piece Ultra Low Flush (ULF) Vitreous China Washdown Toilet
143/8" (365mm)1"(25mm) approx.
171 /
8" (4
35m
m)
133/8" (340mm)
Offset outlet Connector
67/8" (175mm)
29 5
/8"
(753
mm
) app
rox.
31
1 /4"
(790
mm
) app
rox.
65/8
"(1
68m
m)
15"
(380
mm
)
12" (305mm)
Inlet 21/4" (55mm)
10" (255mm)
2" (50m
m)
11" (280mm)
91/2" (240mm)Inlet or overflow
(3/8
") 9m
m N
.P.S
sup
ply
10"
(255
mm
)
Offset outlet Connector
16"
(405
mm
)16
" (4
05m
m)
Inlet 21/4" (55mm)
2" (50m
m)
11" (280mm)
1" (25mm) approx.
14"
(355
mm
)B
otto
m in
let
14"
(355
mm
)B
otto
m in
let
A modern concept close coupled 1.6/0.8 gpf (6/3 l) Adelaide Cube 270 dual fl ush toilet featuring unique two button activation providing substantial water saving compared to standard toilets. Adjustable rough-in and smooth rounded contours for easy cleaning. The closet bowl has been designed with rough-in of 10" (255mm) to 12" (305mm) provided by plastic offset outlet connector option. The tank incorporates the high performance outlet valve which has been specially developed with the Adelaide Cube 270 bowl to ensure optimum reliable fl ushing performance. Due to the substantial water saving benefi ts achieved by the 1.6/0.8 gpf (6/3 l) dual fl ush system the toilet is suitable for multi-purpose applications where water conservation is important.
Closet Bowl: Adelaide Cube 270 1.6/0.8 gpf (6/3 l) full fl ush washdown closet bowl with open fl ushing rim.
Outlet: Floor mounted suitable for connection to waste outlet with offset plastic outlet connector for 10" (255mm) to 12" (305mm) rough-in.
Tank: Adelaide Cube Tank – has a free fi tting lid and is suitable for domestic and light commercial applications. Vandal Resistant Conversion Kit – A simple to install conversion is available for the standard mechanism to lock lid onto the tank, recommended for use in heavy duty commercial areas. Code No. 413276.
Weight: 101 lbs (46 kg).Water Control Valve:
Standard Bottom Entry Tank – available as left hand inlet and incorporates a super quiet water control assembly. Internal overfl ow only.
Fixing: The tank is fi xed directly to the closet bowl with a robust base fi xing system without the need for wall fi xing.
Seat: Adelaide seat Code No. 813306.Color: White.Dimensions: All dimensions are in inches and millimetres and are subject to normal manufacturing
variations. Caroma pursues a policy of continuing improvement in design and performance of its products. The right is therefore reserved to vary specifi cations without notice.
Adelaide Cube 270: Code No.
Tank LH inlet 814790
Bowl 834000
Note: All height dimensions to underside of bowl. Make allowance for bedding.
Screw fi xing: The closet bowl should be bedded with an approved silicon caulking and fi xed with corrosion resistant screws and closet bowl guard washers. Use Caroma screw fi xing kit. Code No. 601150.
�-�������� ������ ��� ��� & ������
�-�������� ������ ��� ��� & ������
CI/SfB(74.1) g3
DateOctober 2008
Supersedes all previous issues
2.1.2Adelaide Cube 270 Easy Height Round Front Plus 1.6/0.8 gpf (6/3 l) Water Saving Dual Flush High Effi ciency Toilet (HET)
Two Piece Ultra Low Flush (ULF) Vitreous China Washdown Toilet
Caroma International Pty Ltd. ABN 90 35 053 413 157
Adelaide Cube 270 Easy Height Round Front Plus 1.6/0.8 gpf (6/3 l) Dual Flush HET
Two Piece Ultra Low Flush (ULF) Vitreous China Washdown Toilet
A modern concept close coupled 1.6/0.8 gpf (6/3 l) Adelaide Cube 270 Easy Height dual fl ush washdown toilet installation designed to provide a seat height of between 17" to 19" (430 to 485mm) measured to the top of the toilet seat. The closet bowl has been designed with rough-in of 10" (255mm) to 12" (305mm) provided by plastic offset outlet connector option. The tank incorporates the high performance outlet valve which has been specially developed with the Adelaide Cube 270 Easy Height toilet to ensure optimum reliable fl ushing performance. Due to the substantial water saving benefi ts achieved by the 1.6/0.8 gpf (6/3 l) dual fl ush system, the toilet is suitable for multi-purpose applications where water conservation is important.
Closet bowl: Adelaide Cube 270 Easy Height 1.6/0.8 gpf (6/3 l) full fl ush washdown closet bowl with open fl ushing rim.
Outlet: Floor mounted suitable for connection to waste outlet with offset plastic outlet connector for 10" (255mm) to 12" (305mm) rough in.
Tank: Adelaide Cube Tank – has a free fi tting lid and is suitable for domestic and light commercial applications. Vandal Resistant Conversion Kit – A simple to install conversion is available for the standard mechanism to lock lid onto the tank, recommended for use in heavy duty commercial areas. Code No. 413276.
Weight: 101 lbs (46 kg).Water Control Valve:
Standard Bottom Entry Tank – available as left hand inlet and incorporates a super quiet water control assembly. Internal overfl ow only.
Fixing: The tank is fi xed directly to the closet bowl with a robust base fi xing system without the need for wall fi xing.
Seat: Adelaide seat Code No. 813306.Color: White.Dimensions: All dimensions are in inches and millimetres and are subject to normal manufacturing
variations. Caroma pursues a policy of continuing improvement in design and performance of its products. The right is therefore reserved to vary specifi cations without notice.
143/8" (365mm)1"(25mm) approx.
171 /
8" (4
35m
m)
133/8" (340mm)
Offset outlet Connector
67/8" (175mm)
29 5
/8"
(753
mm
) app
rox.
65/8
"(1
68m
m)
161 /
2" (4
20m
m)
12" (305mm)
Inlet 21/4" (55mm)
10" (255mm)
2" (50m
m)
11" (280mm)
91/2" (240mm)Inlet or overflow
(3/8
") 9m
m N
.P.S
sup
ply
10"
(255
mm
)
Offset outlet Connector
16"
(405
mm
)16
" (4
05m
m)
Inlet 21/4" (55mm)
2" (50m
m)
11" (280mm)
325 /
8" (8
30m
m) a
ppro
x.
151 /
2" (3
95m
m)
Bot
tom
inle
t15
1 /2"
(395
mm
)B
otto
m in
let
1" (25mm) approx.
Note: All height dimensions to underside of bowl. Make allowance for bedding.
Screw fi xing: The closet bowl should be bedded with an approved silicon caulking and fi xed with corrosion resistant screws and closet bowl guard washers. Use Caroma screw fi xing kit. Code No. 601150.
Adelaide Cube 270 Easy Height Code No.
Tank LH inlet 814790
Bowl 825500
�-�������� ������ ��� ��� & ������
�-�������� ������ ��� ��� & ������
CI/SfB(74.1) g3
DateOctober 2008
Supersedes all previous issues
2.1.3Adelaide Standard 270 Round Front Plus 1.6/0.8 gpf (6/3 l) Water Saving Dual Flush High Effi ciency Toilet (HET)
Two Piece Ultra Low Flush (ULF) Vitreous China Washdown Toilet
Caroma International Pty Ltd. ABN 90 35 053 413 157
Adelaide Standard 270 Round Front Plus 1.6/0.8 gpf (6/3 l) Dual Flush HET
Two Piece Ultra Low Flush (ULF) Vitreous China Washdown Toilet
145/8" (372mm)1"(25mm) approx.
1" (25mm) approx.
171 /
8" (4
35m
m)
133/8" (340mm)
Offset outlet Connector
67/8" (175mm)
29 5
/8"
(753
mm
) app
rox.
30
1 /2"
(775
mm
) app
rox.
63/4
"(1
72m
m)
15"
(380
mm
)
12" (305mm)
Inlet 21/4" (55mm)
10" (255mm)
2" (50m
m)
11" (280mm)
91/2" (240mm)Inlet or overflow
(3/8
") 9m
m N
.P.S
sup
ply
10"
(255
mm
)
Offset outlet Connector
153 /
8" (3
90m
m)
153 /
8" (3
90m
m)
Inlet 21/4" (55mm)
2" (50m
m)
11" (280mm)
14"
(355
mm
)B
otto
m in
let
14"
(355
mm
)B
otto
m in
let
A modern concept close coupled 1.6/0.8 gpf (6/3 l) Adelaide Standard 270 dual fl ush toilet featuring unique two button activation providing substantial water saving compared to standard toilets. Adjustable rough in and smooth rounded contours for easy cleaning. The closet bowl has been designed with rough in of 10" (255mm) to 12" (305mm) provided by plastic offset outlet connector option. The tank incorporates the high performance outlet valve which has been specially developed with the Adelaide Standard 270 toilet to ensure optimum reliable fl ushing performance. Due to the substantial water saving benefi ts achieved by the 1.6/0.8 gpf (6/3 l) dual fl ush system the toilet is suitable for multi purpose applications where water conservation is important.
Closet Bowl: Adelaide Standard 270 1.6/0.8 gpf (6/3 l) full fl ush washdown closet bowl with open fl ushing rim.
Outlet: Floor mounted suitable for connection to waste outlet with offset plastic outlet connector for 10" (255mm) to 12" (305mm) rough-in.
Tank: Adelaide Standard Tank – has a free fi tting lid and is suitable for domestic and light commercial applications. Vandal Resistant Conversion Kit – A simple to install conversion is available for the standard mechanism to lock lid onto the tank, recommended for use in heavy duty commercial areas. Code No. 413276.
Weight: 104 lbs (47 kg).
Water Control Valve:
Standard Bottom Entry Tank – available as left hand inlet and incorporates a super quiet water control assembly. Internal overfl ow only.
Fixing: The tank is fi xed directly to the closet bowl with a robust base fi xing system without the need for wall fi xing.
Seat: Adelaide seat Code No. 813306.
Color: White.
Dimensions: All dimensions are in inches and millimetres and are subject to normal manufacturing variations. Caroma pursues a policy of continuing improvement in design and performance of its products. The right is reserved to vary specifi cations without notice.
Adelaide Standard 270: Code No.
Tank LH inlet 814328
Bowl 834000
Note: All height dimensions to underside of bowl. Make allowance for bedding.
Screw fi xing: The closet bowl should be bedded with an approved silicon caulking and fi xed with corrosion resistant screws and closet bowl guard washers. Use Caroma screw fi xing kit. Code No. 601150.
�-�������� ������ ��� ��� & ������
�-�������� ������ ��� ��� & ������
CI/SfB(74.1) g3
DateOctober 2008
Supersedes all previous issues
2.1.4Adelaide Standard 270 Easy Height Round Front Plus 1.6/0.8 gpf (6/3 l) Water Saving Dual Flush High Effi ciency Toilet (HET)
Two Piece Ultra Low Flush (ULF) Vitreous China Washdown Toilet
Caroma International Pty Ltd. ABN 90 35 053 413 157
Adelaide Standard 270 Easy Height Round Front Plus 1.6/0.8 gpf (6/3 l) Dual Flush HET
Two Piece Ultra Low Flush (ULF) Vitreous China Washdown Toilet
A modern concept close coupled 1.6/0.8 gpf (6/3 l) Adelaide Standard 270 Easy Height dual fl ush washdown toilet installation designed to provide a seat height of between 17" to 19" (430 to 485mm) measured to the top of the toilet seat. The closet bowl has been designed with rough-in of 10" (255mm) to 12" (305mm) provided by plastic offset outlet connector option. The tank incorporates the high performance outlet valve which has been specially developed with the Adelaide Standard 270 bowl to ensure optimum reliable fl ushing performance. Due to the substantial water saving benefi ts achieved by the 1.6/0.8 gpf (6/3 l) dual fl ush system, the toilet is suitable for multi-purpose applications where water conservation is important.
Closet bowl: Adelaide Standard 270 Easy Height 1.6/0.8 gpf (6/3 l) full fl ush washdown closet bowl with open fl ushing rim.
Outlet: Floor mounted suitable for connection to waste outlet with offset plastic outlet connector for 10" (255mm) to 12" (305mm) rough-in.
Tank: Adelaide Standard Tank – has a free fi tting lid and is suitable for domestic and light commercial applications. Vandal Resistant Conversion Kit – A simple to install conversion is available for the standard mechanism to lock lid onto the tank, recommended for use in heavy duty commercial areas. Code No. 413276.
Weight: 104 lbs (47 kg).
Water Control Valve:
Standard Bottom Entry Tank – available as left hand inlet and incorporates a super quiet water control assembly. Internal overfl ow only.
Fixing: The tank is fi xed directly to the closet bowl with a robust base fi xing system without the need for wall fi xing.
Seat: Adelaide seat Code No. 813306.
Color: White.
Dimensions: All dimensions are in inches and millimetres and are subject to normal manufacturing variations. Caroma pursues a policy of continuing improvement in design and performance of its products. The right is therefore reserved to vary specifi cations without notice.
145/8" (372mm)1"(25mm) approx.
171 /
8" (4
35m
m)
133/8" (340mm)
Offset outlet Connector
67/8" (175mm)
29 5
/8"
(753
mm
) app
rox.
31
" (8
15m
m) a
ppro
x.
63/4
"(1
72m
m)
161 /
2" (4
20m
m)
12" (305mm)
Inlet 21/4" (55mm)
10" (255mm)
2" (50m
m)
11" (280mm)
91/2" (240mm)Inlet or overflow
(3/8
") 9m
m N
.P.S
sup
ply
10"
(255
mm
)
Offset outlet Connector
153 /
8" (3
90m
m)
153 /
8" (3
90m
m)
Inlet 21/4" (55mm)
2" (50m
m)
11" (280mm)
151 /
2" (3
95m
m)
Bot
tom
inle
t15
1 /2"
(395
mm
)B
otto
m in
let
1" (25mm) approx.
Note: All height dimensions to underside of bowl. Make allowance for bedding.
Screw fi xing: The closet bowl should be bedded with an approved silicon caulking and fi xed with corrosion resistant screws and closet bowl guard washers. Use Caroma screw fi xing kit. Code No. 601150.
Adelaide Standard 270 Easy Height Code No.
Tank LH inlet 814328
Bowl 825500
�-�������� ������ ��� ��� & ������
CI/SfB(74.1) g3
DateOctober 2008
Supersedes all previous issues
2.2.1Bondi 270 Round Front Plus 1.6/0.8 gpf (6/3 l) Water Saving Dual Flush High Effi ciency Toilet (HET)
Two Piece Ultra Low Flush (ULF) Vitreous China Washdown Toilet
�-�������� ������ ��� ��� & ������
Caroma International Pty Ltd. ABN 90 35 053 413 157
Bondi 270 Round Front Plus 1.6/0.8 gpf (6/3 l) Dual Flush HET
Two Piece Ultra Low Flush (ULF) Vitreous China Washdown Toilet
A modern concept close coupled 1.6/0.8 gpf (6/3 l) Bondi 270 dual fl ush toilet featuring unique two button activation providing substantial water saving compared to standard toilets. Adjustable rough-in and smooth rounded contours for easy cleaning. The closet bowl has been designed with rough-in of 10" (255mm) to 12" (305mm) provided by plastic offset outlet connector option. The tank incorporates the high performance outlet valve which has been specially developed with the 270 Round Front Plus bowl to ensure optimum reliable fl ushing performance. Due to the substantial water saving benefi ts achieved by the 1.6/0.8 gpf (6/3 l) dual fl ush system the toilet is suitable for multi-purpose applications where water conservation is important.
Closet Bowl: 270 Round Front Plus 1.6/0.8 gpf (6/3 l) full fl ush washdown closet bowl with open fl ushing rim.
Outlet: Floor mounted suitable for connection to waste outlet with offset plastic outlet connector for 10" (255mm) to 12" (305mm) rough-in.
Tank: Bondi Tank – has a free fi tting lid and is suitable for domestic and light commercial applications. Vandal Resistant Conversion Kit – A simple to install conversion is available for the standard mechanism to lock lid onto the tank, recommended for use in heavy duty commercial areas. Code No. 413276.
Weight: 86 lbs (39 kg).Water Control Valve:
Standard Bottom Entry Tank – available as left hand inlet and incorporates a super quiet water control assembly. Internal overfl ow only.
Fixing: The tank is fi xed directly to the closet bowl with a robust base fi xing system without the need for wall fi xing.
Seats: The following Caroma seats are recommended: Detachable Code No. 301032, Easy Closing Code No. 326222, Standard Code No. 326707, and Wooden Code No. 326606.
Colors: White and biscuit.Dimensions: All dimensions are in inches and millimetres and are subject to normal manufacturing
variations. Caroma pursues a policy of continuing improvement in design and perform-ance of its products. The right is therefore reserved to vary specifi cations without notice.
Offset outlet Connector
14" (358mm)
51/2" (140mm)
141/4" (360mm)
29"
(740
mm
) app
rox.
16"
(405
mm
)
7"(1
80m
m)
161 /
2" (4
20m
m) a
ppro
x.
15"
(380
mm
)
12" (305mm)
Offset outlet Connector
16"
(405
mm
)
Inlet 21/4" (55mm)
Inlet 21/4" (55mm)
10" (255mm)
2" (50m
m)
2" (50m
m)
3/4" (20mm) approx. 3/4" (20mm) approx.
(3/8
") 9m
m N
.P.S
sup
ply
10"
(255
mm
) 11" (280mm)
11" (280mm)
73/4" (195mm)Inlet or overflow
141 /
2" (3
70m
m)
Bot
tom
Inle
t14
1 /2"
(370
mm
)B
otto
m In
let
311 /
2" (8
00m
m) a
ppro
x.
Note: All height dimensions to underside of bowl. Make allowance for bedding.
Screw fi xing: The closet bowl should be bedded with an approved silicon caulking and fi xed with corrosion resistant screws and closet bowl guard washers. Use Caroma screw fi xing kit. Code No. 601150.
Bondi 270: Code No.
Tank LH inlet 726350
Bowl 609159
�-�������� ������ ��� ��� & ������
�-�������� ������ ��� ��� & ������
CI/SfB(74.1) g3
DateOctober 2008
Supersedes all previous issues
2.2.2Bondi 270 Easy Height Round Front Plus 1.6/0.8 gpf (6/3 l) Water Saving Dual Flush High Effi ciency Toilet (HET)
Two Piece Ultra Low Flush (ULF) Vitreous China Washdown Toilet
Caroma International Pty Ltd. ABN 90 35 053 413 157
Bondi 270 Easy Height Round Front Plus 1.6/0.8 gpf (6/3 l) Dual Flush HET
Two Piece Ultra Low Flush (ULF) Vitreous China Washdown Toilet
A modern concept close coupled 1.6/0.8 gpf (6/3 l) Bondi 270 Easy Height dual fl ush washdown toilet installation designed to provide a seat height of between 17" to 19" (430 to 485mm) measured to the top of the toilet seat. The closet bowl has been designed with rough-in of 10" (255mm) to 12" (305mm) provided by plastic offset outlet connector option. The tank incorporates the high performance outlet valve which has been specially developed with the 270 Easy Height bowl to ensure optimum reliable fl ushing performance. Due to the substantial water saving benefi ts achieved by the 1.6/0.8 gpf (6/3 l) dual fl ush system, the toilet is suitable for multi-purpose applications where water conservation is important.
Closet bowl: 270 Easy Height Round Front Plus 1.6/0.8 gpf (6/3 l) full fl ush washdown closet bowl with open fl ushing rim.
Outlet: Floor mounted suitable for connection to waste outlet with offset plastic outlet connector for 10" (255mm) to 12" (305mm) rough-in.
Tank: Bondi Tank – has a free fi tting lid and is suitable for domestic and light commercial applications. Vandal Resistant Conversion Kit – A simple to install conversion is available for the standard mechanism to lock lid onto the tank, recommended for use in heavy duty commercial areas. Code No. 413276.
Weight: 96 lbs (44 kg).Water Control Valve:
Standard Bottom Entry Tank – available as left hand inlet and incorporates a super quiet water control assembly. Internal overfl ow only.
Fixing: The tank is fi xed directly to the closet bowl with a robust base fi xing system without the need for wall fi xing.
Seats: The following Caroma seats are recommended: Detachable Code No. 301032, Easy Closing Code No. 326222, Standard Code No. 326707, and Wooden Code No. 326606.
Colors: White and biscuit.Dimensions: All dimensions are in inches and millimetres and are subject to normal manufacturing
variations. Caroma pursues a policy of continuing improvement in design and performance of its products. The right is therefore reserved to vary specifi cations without notice.
Offset outlet Connector
14" (358mm)
5 1/2" (140mm)
18" (455mm min.)
29"
(740
mm
) app
rox.
34
5 /8"
(855
mm
) app
rox.
16"
(405
mm
)
7"(1
80m
m)
161 /
2" (4
20m
m) a
ppro
x.
17"
(430
mm
)
18"
(455
mm
)
12" (305mm)
Offset outlet Connector
16"
(405
mm
)
Inlet 21/4" (55mm)
Inlet 21/4" (55mm)
10" (255mm)
2" (50m
m)
2" (50m
m)
3/4" (20mm) approx. 3/4" (20mm) approx.
(3/8
") 9m
m N
.P.S
sup
ply
10"
(255
mm
) 11" (280mm)
11" (280mm)
141/4" (360mm)
73/4" (195mm)Inlet or overflow
163
/4"
(425
mm
)B
otto
m in
let
163
/4"
(425
mm
)B
otto
m in
let
Note: All height dimensions to underside of bowl. Make allowance for bedding.
Screw fi xing: The closet bowl should be bedded with an approved silicon caulking and fi xed with corrosion resistant screws and closet bowl guard washers. Use Caroma screw fi xing kit. Code No. 601150.
Bondi 270 Easy Height Code No.
Tank LH inlet 726350
Bowl 609177
�-�������� ������ ��� ��� & ������
�-�������� ������ ��� ��� & ������
CI/SfB(74.1) g3
DateOctober 2008
Supersedes all previous issues
2.2.3Bondi 270 Elongated 1.6/0.8 gpf (6/3 l) Water Saving Dual Flush High Effi ciency Toilet (HET)
Two Piece Ultra Low Flush (ULF) Vitreous China Washdown Toilet
Caroma International Pty Ltd. ABN 90 35 053 413 157
Bondi 270 Elongated 1.6/0.8 gpf (6/3 l) Dual Flush HET
Two Piece Ultra Low Flush (ULF) Vitreous China Washdown Toilet
A modern concept close coupled 1.6/0.8 gpf (6/3 l) Bondi 270 Elongated dual fl ush toilet featuring unique two button activation providing substantial water saving compared to standard toilets. Adjustable rough-in and smooth rounded contours for easy cleaning. The closet bowl has been designed with rough-in of 10" (255mm) to 12" (305mm) provided by plastic offset outlet connector option. The tank incorporates the high performance outlet valve which has been specially developed with the 270 elongated bowl to ensure optimum reliable fl ushing performance. Due to the substantial water saving benefi ts achieved by the 1.6/0.8 gpf (6/3 l) dual fl ush system, the toilet is suitable for multi-purpose applications where water conservation is important. Closet Bowl: 270 Elongated 1.6/0.8 gpf (6/3 l) full fl ush washdown closet bowl with open fl ushing
rim.Outlet: Floor mounted suitable for connection to waste outlet with offset plastic outlet
connector for 10" (255mm) to 12" (305mm) rough-in.Tank: Bondi Tank – has a free fi tting lid and is suitable for domestic and light commercial
applications. Vandal Resistant Conversion Kit – A simple to install conversion is available for the standard mechanism to lock lid onto the tank, recommended for use in heavy duty commercial areas. Code No. 413276.
Weight: 90 lbs (41 kg).Water Control Valve:
Standard Bottom Entry Tank – available as left hand inlet and incorporates a super quiet water control assembly. Internal overfl ow only.
Fixing: The tank is fi xed directly to the closet bowl with a robust base fi xing system without the need for wall fi xing.
Seats: The following Caroma seats are recommended: Elongated Code No. 326307, Elongated Soft Close Code No.326221, and Commercial Code No. 326813.
Colors: White and biscuit.Dimensions: All dimensions are in inches and millimetres and are subject to normal manufacturing
variations. Caroma pursues a policy of continuing improvement in design and perform-ance of its products. The right is therefore reserved to vary specifi cations without notice.
Offset outlet Connector
51/2" (140mm)
14" (355mm)
311 /
4" (7
95m
m) a
ppro
x.
311 /
2" (8
10m
m) a
ppro
x.
16"
(405
mm
)
7"(1
80m
m)
181 /
2" (4
70m
m) a
ppro
x.
15"
(380
mm
)
12" (305mm)
Offset outlet Connector
16"
(405
mm
)
Inlet 21/4" (55mm)
Inlet 21/4" (55mm)
10" (255mm)
2" (50m
m)
2" (50m
m)
3/4" (20mm) approx. 3/4" (20mm) approx.
(3/8
") 9m
m N
.P.S
sup
ply
10"
(255
mm
) 11" (280mm)
11" (280mm)
14" (358mm)
73/4" (195mm)Inlet or overflow
141 /
2" (3
70m
m)
Bot
tom
inle
t 14
1 /2"
(370
mm
)B
otto
m in
let
Note: All height dimensions to underside of closet bowl. Make allowance for bedding.
Screw fi xing: The closet bowl should be bedded with an approved silicon caulking and fi xed with corrosion resistant screws and closet bowl guard washers. Use Caroma screw fi xing kit. Code No. 601150.
Bondi 270 Elongated: Code No.
Tank LH inlet 726350
Bowl 609100
�-�������� ������ ��� ��� & ������
�-�������� ������ ��� ��� & ������
CI/SfB(74.1) g3
DateOctober 2008
Supersedes all previous issues
2.2.4Bondi 270 Easy Height Elongated 1.6/0.8 gpf (6/3 l) Water Saving Dual Flush High Effi ciency Toilet (HET)
Two Piece Ultra Low Flush (ULF) Vitreous China Washdown Toilet
Caroma International Pty Ltd. ABN 90 35 053 413 157
Bondi 270 Easy Height Elongated 1.6/0.8 gpf (6/3 l) Dual Flush HET
Two Piece Ultra Low Flush (ULF) Vitreous China Washdown Toilet
A modern concept close coupled 1.6/0.8 gpf (6/3 l) Bondi 270 Easy Height Elongated dual fl ush wash-down toilet installation designed to provide a seat height of between 17" to 19" (430 to 485mm) measured to the top of the toilet seat. The closet bowl has been designed with rough-in of 10" (255mm) to 12" (305mm) provided by plastic offset outlet connector option. The tank incorporates the high performance outlet valve which has been specially developed with the 270 Easy Height elongated bowl to ensure optimum reliable fl ushing performance. Due to the substantial water saving benefi ts achieved by the 1.6/0.8 gpf (6/3 l) dual fl ush system, the toilet is suitable for multi-purpose applications where water conservation is important.Closet bowl: 270 Easy Height Elongated 1.6/0.8 gpf (6/3 l) full fl ush washdown closet bowl with
open fl ushing rim.Outlet: Floor mounted suitable for connection to waste outlet with offset plastic outlet connector
for 10" (255mm) to 12" (305mm) rough-in.Tank: Bondi Tank – has a free fi tting lid and is suitable for domestic and light commercial
applications. Vandal Resistant Conversion Kit – A simple to install conversion is available for the standard mechanism to lock lid onto the tank, recommended for use in heavy duty commercial areas. Code No. 413276.
Weight: 96 lbs (44 kg).Water Control Valve:
Standard Bottom Entry Tank – available as left hand inlet and incorporates a super quiet water control assembly. Internal overfl ow only.
Fixing: The tank is fi xed directly to the closet bowl with a robust base fi xing system without the need for wall fi xing.
Seats: The following Caroma seats are recommended: Elongated Code No. 326307, Elongated Soft Close Code No. 326221, and Commercial Code No. 326813.
Colors: White and biscuit.Dimensions: All dimensions are in inches and millimetres and are subject to normal manufacturing
variations. Caroma pursues a policy of continuing improvement in design and performance of its products. The right is therefore reserved to vary specifi cations without notice.
73/4" (195mm)Inlet or overflow
Offset outlet Connector
14" (358mm)
51/2" (140mm)
18" (455mm min.)
311 /
4" (7
95m
m) a
ppro
x.
345 /
8" (8
55m
m) a
ppro
x.
16"
(405
mm
)
7"(1
80m
m)
181 /
2" (4
70m
m) a
ppro
x.
17"
(430
mm
)
18"
(455
mm
)
12" (305mm)
Offset outlet Connector
16"
(405
mm
) 1
63/4
" (4
25m
m)
Bot
tom
inle
t
163
/4"
(425
mm
)B
otto
m in
let
Inlet 21/4" (55mm)
Inlet 21/4" (55mm)
10" (255mm)
2" (50m
m)
2" (50m
m)
3/4" (20mm) approx. 3/4" (20mm) approx.
(3/8
") 9m
m N
.P.S
sup
ply
10"
(255
mm
) 11" (280mm)
11" (280mm)
14" (355mm)
Note: All height dimensions to underside of closet bowl. Make allowance for bedding.
Screw fi xing: The closet bowl should be bedded with an approved silicon caulking and fi xed with corrosion resistant screws and closet bowl guard washers. Use Caroma screw fi xing kit. Code No. 601150.
Bondi 270 Easy Height Elongated:
Code No.
Tank LH inlet 726350
Bowl 609120
�-�������� ������ ��� ��� & ������
�-�������� ������ ��� ��� & ������
CI/SfB(74.1) g3
DateOctober 2008
Supersedes all previous issues
2.2.5Bondi 305 Round Front Plus1.6/0.8 gpf (6/3 l) Water Saving Dual Flush High Effi ciency Toilet (HET)
Two Piece Ultra Low Flush (ULF) Vitreous China Washdown Toilet
Caroma International Pty Ltd. ABN 90 35 053 413 157
Bondi 305 Round Front Plus 1.6/0.8 gpf (6/3 l) Dual Flush HET
Two Piece Ultra Low Flush (ULF) Vitreous China Washdown Toilet
A modern concept close coupled 1.6/0.8 gpf (6/3 l) Bondi 305 dual fl ush toilet featuring unique two button activation providing substantial water saving compared to standard toilets. Adjustable rough-in and smooth rounded contours for easy cleaning. The closet bowl has been designed with a 12" (305mm) outlet rough-in. The tank incorporates the high performance outlet valve which has been specially developed with the 305 Round Front Plus bowl to ensure optimum reliable fl ushing performance. Due to the substantial water saving benefi ts achieved by the 1.6/0.8 gpf (6/3 l) dual fl ush system, the toilet is suitable for multi-purpose applications where water conservation is important.
Closet Bowl: 305 Round Front Plus 1.6/0.8 gpf (6/3 l) full fl ush washdown closet bowl with open fl ushing rim.
Outlet: Floor mounted 12" (305mm) outlet connection.Tank: Bondi Tank – has a free fi tting lid and is suitable for domestic and light commercial
applications. Vandal Resistant Conversion Kit – A simple to install conversion is available for the standard mechanism to lock lid onto the tank, recommended for use in heavy duty commercial areas. Code No. 413276.
Weight: 89 lbs (40 kg).Water Control Valve:
Standard Bottom Entry Tank – available as left hand inlet and incorporates a super quiet water control assembly. Internal overfl ow only.
Fixing: The tank is fi xed directly to the closet bowl with a robust base fi xing system without the need for wall fi xing.
Seats: The following Caroma seats are recommended: Detachable Code No. 301032, Easy Closing Code No. 326222, Standard Code No. 326707, and Wooden Code No.326606.
Colors: White and biscuit.Dimensions: All dimensions are in inches and millimetres and are subject to normal manufacturing
variations. Caroma pursues a policy of continuing improvement in design and performance of its products. The right is therefore reserved to vary specifi cations without notice.
73/4" (195mm)Inlet or overflow
16"
(405
mm
)
15"
(380
mm
)
311 /
2" (8
00m
m) a
ppro
x.28
1 /2"
(725
mm
) app
rox.
14" (358mm)
141/4" (360mm)
12" (305mm)Center Line of Outlet6"(152mm)
161 /
2" (4
20m
m) a
ppro
x.7"
(180
mm
)
Bolt Fixing Centre
Bondi Cistern
1/4" (5mm) approx.
1/4" (5mm) approx.
Inlet 21/4" (55mm)
51/2" (140mm)
141 /
2" (3
70m
m)
Bot
tom
Inle
t
Bondi 305: Code No.
Tank LH inlet 726350
Bowl 609151
Note: All height dimensions to underside of closet bowl. Make allowance for bedding.
Closet bowl fi xing: The closet bowl should be bedded with an approved silicon caulking.
�-�������� ������ ��� ��� & ������
�-�������� ������ ��� ��� & ������
CI/SfB(74.1) g3
DateOctober 2008
Supersedes all previous issues
2.2.6Bondi 305 Elongated1.6/0.8 gpf (6/3 l) Water Saving Dual Flush High Effi ciency Toilet (HET)
Two Piece Ultra Low Flush (ULF) Vitreous China Washdown Toilet
Caroma International Pty Ltd. ABN 90 35 053 413 157
Bondi 305 Elongated 1.6/0.8 gpf (6/3 l) Dual Flush HET
Two Piece Ultra Low Flush (ULF) Vitreous China Washdown Toilet
A modern concept close coupled 1.6/0.8 gpf (6/3 l) Bondi 305 Elongated dual fl ush toilet featuring unique two button activation providing substantial water saving compared to standard toilets. Adjustable rough-in and smooth rounded contours for easy cleaning. The closet bowl has been designed with a 12" (305mm) outlet rough-in. The tank incorporates the high performance outlet valve which has been specially developed with the 305 elongated bowl to ensure optimum reliable fl ushing performance. Due to the substantial water saving benefi ts achieved by the 1.6/0.8 gpf (6/3 l) dual fl ush system, the toilet is suitable for multi-purpose applications where water conservation is important. Closet Bowl: 305 Elongated 1.6/0.8 gpf (6/3 l) full fl ush washdown closet bowl with open fl ushing
rim.Outlet: Floor mounted 12" (305mm) outlet connection.Tank: Bondi Tank – has a free fi tting lid and is suitable for domestic and light commercial
applications. Vandal Resistant Conversion Kit – A simple to install conversion is available for the standard mechanism to lock lid onto the tank, recommended for use in heavy duty commercial areas. Code No. 413276.
Weight: 90 lbs (41 kg).Water Control Valve:
Standard Bottom Entry Tank – available as left hand inlet and incorporates a super quiet water control assembly. Internal overfl ow only.
Fixing: The tank is fi xed directly to the closet bowl with a robust base fi xing system without the need for wall fi xing.
Seats: The following Caroma seats are recommended: Elongated Code No. 326307, Elongated Soft Close Code No. 326221, and Commercial Code No. 326813.
Colors: White and buscuit.Dimensions: All dimensions are in inches and millimetres and are subject to normal manufacturing
variations. Caroma pursues a policy of continuing improvement in design and perform-ance of its products. The right is therefore reserved to vary specifi cations without notice.
73/4" (195mm)Inlet or overflow
16"
(405
mm
)
15"
(380
mm
)
301 /
8" (7
65m
m) a
ppro
x.
14" (358mm)
14" (355mm)
12" (305mm)Center Line of Outlet6"(152mm)
181 /
2" (4
70m
m) a
ppro
x.
7"(1
80m
m)
Bolt Fixing Centre
Bondi Cistern
1/4" (5mm) approx.
1/4" (5mm) approx.
Inlet 21/4" (55mm)
51/2 "(140mm)
141 /
2" (3
70m
m)
Bot
tom
Inle
t
311 /
2" (8
00m
m) a
ppro
x.
Bondi 305 Elongated: Code No.
Tank LH inlet 726350
Bowl 609130
Note: All height dimensions to underside of closet bowl. Make allowance for bedding.
Closet bowl fi xing: The closet bowl should be bedded with an approved silicon caulking.
�-�������� ������ ��� ��� & ������
�-�������� ������ ��� ��� & ������
CI/SfB(74.1) g3
DateOctober 2008
Supersedes all previous issues
2.3.1Brisbane 270 Round Front Plus1.6/0.8 gpf (6/3 l) Water Saving Dual Flush High Effi ciency Toilet (HET)
Two Piece Ultra Low Flush (ULF) Vitreous China Washdown Toilet
Caroma International Pty Ltd. ABN 90 35 053 413 157
Brisbane 270 Round Front Plus 1.6/0.8 gpf (6/3 l) Dual Flush HET
Two Piece Ultra Low Flush (ULF) Vitreous China Washdown Toilet
331 /
4" (8
45m
m) a
ppro
x.
12" (305mm)
2" (50m
m)
11" (280mm)
2" (50m
m)
11" (280mm)
10" (255mm)
Offset outlet Connector
Offset outlet Connector
171 /
4" (4
40m
m)
171 /
4" (4
40m
m)
143 /
8" (3
65m
m)
Bot
tom
Inle
t14
3 /8"
(365
mm
)B
otto
m In
let
283 /
8" (7
20m
m)
153/4" (400mm)
151 /
2" (3
95m
m)
131/8" (335mm)
61/8
"(1
55m
m)
6"(150mm)
161 /
2" (4
20m
m)
(3/8
") 9m
m N
.P.S
sup
ply
10"
(255
mm
)
9" (230mm)Inlet or overflow
11/8" (30mm) approx.
23/4" (70mm)
23/4" (70mm)
11/8" (30mm) approx.
A modern concept close coupled 1.6/0.8 gpf (6/3 l) Brisbane 270 dual fl ush toilet featuring unique two button activation providing substantial water saving compared to standard toilets. Adjustable rough-in and smooth rounded contours for easy cleaning. The closet bowl has been designed with rough-in of 10" (255mm) to 12" (305mm) provided by plastic offset outlet connector option. The tank incorporates the high performance outlet valve which has been specially developed with the Brisbane 270 bowl to ensure optimum reliable fl ushing performance. Due to the substantial water saving benefi ts achieved by the 1.6/0.8 gpf (6/3 l) dual fl ush system, the toilet is suitable for multi-purpose applications where water conservation is important.
Closet Bowl: Brisbane 270 1.6/0.8 gpf (6/3 l) full fl ush washdown closet bowl with open fl ushing rim.
Outlet: Floor mounted suitable for connection to waste outlet with offset plastic outlet connector for 10" (255mm) to 12" (305mm) rough-in.
Tank: Brisbane Tank – has a free fi tting lid and is suitable for domestic and light commercial applications. Vandal Resistant Conversion Kit – A simple to install conversion is available for the standard mechanism to lock lid onto the tank, recommended for use in heavy duty commercial areas. Code No. 413276.
Weight: 111 lbs (50 kg).Water Control Valve:
Standard Bottom Entry Tank – available as left hand inlet and incorporates a super quiet water control assembly. Internal overfl ow only.
Fixing: The tank is fi xed directly to the closet bowl with a robust base fi xing system without the need for wall fi xing.
Seat: Brisbane seat Code No. 301033.Color: White.Dimensions: All dimensions are in inches and millimetres and are subject to normal manufacturing
variations. Caroma pursues a policy of continuing improvement in design and perform-ance of its products. The right is therefore reserved to vary specifi cations without notice.
Brisbane 270: Code No.
Tank LH inlet 810266
Bowl 833900
Note: All height dimensions to underside of bowl. Make allowance for bedding.
Screw fi xing: The closet bowl should be bedded with an approved silicon caulking and fi xed with corrosion resistant screws and closet bowl guard washers. Use Caroma screw fi xing kit. Code No. 601150.
�-�������� ������ ��� ��� & ������
�-�������� ������ ��� ��� & ������
CI/SfB(74.1) g3
DateOctober 2008
Supersedes all previous issues
2.4.1Caravelle 270 Round Front Plus1.6/0.8 gpf (6/3 l) Water Saving Dual Flush High Effi ciency Toilet (HET)
Two Piece Ultra Low Flush (ULF) Vitreous China Washdown Toilet
Caroma International Pty Ltd. ABN 90 35 053 413 157
Caravelle 270 Round Front Plus 1.6/0.8 gpf (6/3 l) Dual Flush HET
Two Piece Ultra Low Flush (ULF) Vitreous China Washdown Toilet
A modern concept close coupled 1.6/0.8 gpf (6/3 l) Caravelle 270 dual fl ush toilet featuring unique two button activation providing substantial water saving compared to standard toilets. Adjustable rough-in and smooth rounded contours for easy cleaning. The closet bowl has been designed with rough in of 10" (255mm) to 12" (305mm) provided by plastic offset outlet connector option. The tank incorporates the high performance outlet valve which has been specially developed with the 270 Round Front Plus bowl to ensure optimum reliable fl ushing performance. Due to the substantial water saving benefi ts achieved by the 1.6/0.8 gpf (6/3 l) dual fl ush system, the toilet is suitable for multi-purpose applications where water conservation is important.
Closet Bowl: 270 Round Front Plus 1.6/0.8 gpf (6/3 l) full fl ush washdown closet bowl with open fl ushing rim.
Outlet: Floor mounted suitable for connection to waste outlet with offset plastic outlet connector for 10" (255mm) to 12" (305mm) rough-in.
Tank: Caravelle Tank – has a free fi tting lid and is suitable for domestic and light commercial applications. Vandal Resistant Conversion Kit – A simple to install conversion is available for the standard mechanism to lock lid onto the tank, recommended for use in heavy duty commercial areas. Code No. 413276.
Weight: 84 lbs (38 kg).
Water Control Valve:
Standard Bottom Entry Tank – available as left hand inlet and incorporates a super quiet water control assembly. Internal overfl ow only.
Fixing: The tank is fi xed directly to the closet bowl with a robust base fi xing system without the need for wall fi xing.
Seats: The following Caroma seats are recommended: Detachable Code No. 301032, Easy Closing Code No. 326222, Standard Code No. 326707, and Wooden Code No. 326606.
Colors: White and biscuit.
Dimensions: All dimensions are in inches and millimetres and are subject to normal manufacturing variations. Caroma pursues a policy of continuing improvement in design and perform-ance of its products. The right is therefore reserved to vary specifi cations without notice.
Offset outlet Connector
143/8" (365mm)
51/2" (140mm)
141/4" (360mm)
29"
(740
mm
) app
rox.
32
7 /8"
(835
mm
) app
rox.
163 /
4" (4
25m
m)
63/4
"(1
70m
m)
161 /
2" (4
20m
m) a
ppro
x.
15"
(380
mm
)
12" (305mm)
Offset outlet Connector
163 /
4" (4
25m
m)
Inlet 21/4" (55mm)
Inlet 21/4" (55mm)
10" (255mm)
2"
(50m
m)
2"
(50m
m)
3/4" (20mm) approx. 3/4" (20mm) approx.
(3/8
") 9m
m N
.P.S
sup
ply
10"
(255
mm
) 11" (280mm)
11" (280mm)
73/4" (195mm) Inlet or overflow
141 /
2" (3
70m
m)
Bot
tom
inle
t 14
1 /2"
(370
mm
)B
otto
m in
let
Note: All height dimensions to underside of bowl. Make allowance for bedding.
Screw fi xing: The closet bowl should be bedded with an approved silicon caulking and fi xed with corrosion resistant screws and closet bowl guard washers. Use Caroma screw fi xing kit. Code No. 601150.
Caravelle 270: Code No.
Tank LH inlet 629435
Bowl 609159
�-�������� ������ ��� ��� & ������
�-�������� ������ ��� ��� & ������
CI/SfB(74.1) g3
DateOctober 2008
Supersedes all previous issues
2.4.2Caravelle 270 Easy Height Round Front Plus 1.6/0.8 gpf (6/3 l) Water Saving Dual Flush High Effi ciency Toilet (HET)
Two Piece Ultra Low Flush (ULF) Vitreous China Washdown Toilet
Caroma International Pty Ltd. ABN 90 35 053 413 157
Caravelle 270 Easy Height Round Front Plus 1.6/0.8 gpf (6/3 l) Dual Flush HET
Two Piece Ultra Low Flush (ULF) Vitreous China Washdown Toilet
A modern concept close coupled 1.6/0.8 gpf (6/3 l) Caravelle 270 Easy Height dual fl ush washdown toilet installation designed to provide a seat height of between 17" to 19" (430 to 485mm) measured to the top of the toilet seat. The closet bowl has been designed with rough-in of 10" (255mm) to 12" (305mm) provided by plastic offset outlet connector option. The tank incorporates the high performance outlet valve which has been specially developed with the 270 Easy Height Round Front Plus bowl to ensure optimum reliable fl ushing performance. Due to the substantial water saving benefi ts achieved by the 1.6/0.8 gpf (6/3 l) dual fl ush system, the toilet is suitable for multi-purpose applications where water conservation is important.
Closet bowl: 270 Easy Height Round Front Plus 1.6/0.8 gpf (6/3 l) full fl ush washdown closet bowl with open fl ushing rim.
Outlet: Floor mounted suitable for connection to waste outlet with offset plastic outlet connector for 10" (255mm) to 12" (305mm) rough-in.
Tank: Caravelle Tank – has a free fi tting lid and is suitable for domestic and light commercial applications. Vandal Resistant Conversion Kit – A simple to install conversion is available for the standard mechanism to lock lid onto the tank, recommended for use in heavy duty commercial areas. Code No.413276. High profi le buttons option for visually impaired Code No. 405067.
Weight: 94 lbs (43 kg).Water Control Valve:
Standard Bottom Entry Tank – available as left hand inlet and incorporates a super quiet water control assembly. Internal overfl ow only.
Fixing: The tank is fi xed directly to the closet bowl with a robust base fi xing system without the need for wall fi xing.
Seats: The following Caroma seats are recommended: Detachable Code No. 301032, Easy Closing Code No. 326222, Standard Code No. 326707, and Wooden Code No. 326606.
Colors: White and biscuit.Dimensions: All dimensions are in inches and millimetres and are subject to normal manufacturing varia-
tions. Caroma pursues a policy of continuing improvement in design and performance of its products. The right is therefore reserved to vary specifi cations without notice.
Offset outlet Connector
143/8" (365mm)
5 1/2" (140mm)
18" (455mm min.)
29"
(740
mm
) app
rox.
34
3 /4"
(885
mm
) app
rox.
163 /
4" (4
25m
m)
63/4
" (1
70m
m)
161 /
2" (4
20m
m) a
ppro
x.
17"
(430
mm
)
18"
(455
mm
)
12" (305mm)
Offset outlet Connector
163 /
4" (4
25m
m)
163 /
4" (4
25m
m)
Bot
tom
inle
t 16
3 /4"
(425
mm
)B
otto
m in
let
Inlet 21/4" (55mm)
Inlet 21/4" (55mm)
10" (255mm)
2"
(50m
m)
2"
(50m
m)
3/4" (20mm) approx.
3/4" (20mm) approx.
(3/8
") 9m
m N
.P.S
sup
ply
10"
(255
mm
) 11" (280mm)
11" (280mm)
141/4" (360mm)
73/4" (195mm) Inlet or overflow
Note: All height dimensions to underside of bowl. Make allowance for bedding.
Screw fi xing: The closet bowl should be bedded with an approved silicon caulking and fi xed with corrosion resistant screws and closet bowl guard washers. Use Caroma screw fi xing kit. Code No. 601150.
Caravelle Easy Height Code No.
Tank LH inlet 629435
Bowl 609177
Caroma Raised Push Button Option
�-�������� ������ ��� ��� & ������
�-�������� ������ ��� ��� & ������
CI/SfB(74.1) g3
DateOctober 2008
Supersedes all previous issues
2.4.3Caravelle 270 Elongated 1.6/0.8 gpf (6/3 l) Water Saving Dual Flush High Effi ciency Toilet (HET)
Two Piece Ultra Low Flush (ULF) Vitreous China Washdown Toilet
Caroma International Pty Ltd. ABN 90 35 053 413 157
Caravelle 270 Elongated 1.6/0.8 gpf (6/3 l) Dual Flush HET
Two Piece Ultra Low Flush (ULF) Vitreous China Washdown Toilet
A modern concept close coupled 1.6/0.8 gpf (6/3 l) Caravelle 270 Elongated dual fl ush toilet featuring unique two button activation providing substantial water saving compared to standard toilets. Adjustable rough-in and smooth rounded contours for easy cleaning. The closet bowl has been designed with rough-in of 10" (255mm) to 12" (305mm) provided by plastic offset outlet connector option. The tank incorporates the high performance outlet valve which has been specially developed with the 270 elongated bowl to ensure optimum reliable fl ushing performance. Due to the substantial water saving benefi ts achieved by the 1.6/0.8 gpf (6/3 l) dual fl ush system, the toilet is suitable for multi-purpose applications where water conservation is important. Closet Bowl: 270 Elongated 1.6/0.8 gpf (6/3 l) full fl ush washdown closet bowl with open fl ushing
rim.Outlet: Floor mounted suitable for connection to waste outlet with offset plastic outlet
connector for 10" (255mm) to 12" (305mm) rough-in.Tanks: Caravelle Tank – has a free fi tting lid and is suitable for domestic and light commercial
applications. Vandal Resistant Conversion Kit – A simple to install conversion is available for the standard mechanism to lock lid onto the tank, recommended for use in heavy duty commercial areas. Code No. 413276.
Weight: 88 lbs (40 kg).Water Control Valve:
Standard Bottom Entry Tank – available as left hand inlet and incorporates a super quiet water control assembly. Internal overfl ow only.
Fixing: The tank is fi xed directly to the closet bowl with a robust base fi xing system without the need for wall fi xing.
Seats: The following Caroma seats are recommended: Elongated Code No. 326307, Elongated Soft Close Code No. 326221, and Commercial Code No. 326813.
Colors: White and biscuit.Dimensions: All dimensions are in inches and millimetres and are subject to normal manufacturing
variations. Caroma pursues a policy of continuing improvement in design and perform-ance of its products. The right is therefore reserved to vary specifi cations without notice.
Offset outlet Connector
51/2" (140mm)
14" (355mm)
311 /
4" (7
95m
m) a
ppro
x.
327 /
8" (8
35m
m) a
ppro
x.
163 /
4" (4
25m
m)
63/4
"(1
70m
m)
181 /
2" (4
70m
m) a
ppro
x.
15"
(380
mm
)
12" (305mm)
Offset outlet Connector
163 /
4" (4
25m
m)
Inlet 21/4" (55mm)
Inlet 21/4" (55mm)
10" (255mm)
2"
(50m
m)
2"
(50m
m)
3/4" (20mm) approx. 3/4" (20mm) approx.
(3/8
") 9m
m N
.P.S
sup
ply
10"
(255
mm
) 11" (280mm)
11" (280mm)
143/8" (365mm)
73/4" (195mm) Inlet or overflow
141 /
2" (3
70m
m)
Bot
tom
inle
t 14
1 /2"
(370
mm
)B
otto
m in
let
Note: All height dimensions to underside of closet bowl. Make allowance for bedding.
Screw fi xing: The closet bowl should be bedded with an approved silicon caulking and fi xed with corrosion resistant screws and closet bowl guard washers. Use Caroma screw fi xing kit. Code No. 601150.
Caravelle 270 Elongated: Code No.
Tank LH inlet 629435
Bowl 609100
�-�������� ������ ��� ��� & ������
�-�������� ������ ��� ��� & ������
CI/SfB(74.1) g3
DateOctober 2008
Supersedes all previous issues
2.4.4Caravelle 270 Easy Height Elongated 1.6/0.8 gpf (6/3 l) Water Saving Dual Flush High Effi ciency Toilet (HET)
Two Piece Ultra Low Flush (ULF) Vitreous China Washdown Toilet
Caroma International Pty Ltd. ABN 90 35 053 413 157
Caravelle 270 Easy Height Elongated 1.6/0.8 gpf (6/3 l) Dual Flush HET
Two Piece Ultra Low Flush (ULF) Vitreous China Washdown Toilet
A modern concept close coupled 1.6/0.8 gpf (6/3 l) Caravelle 270 Easy Height Elongated dual fl ush washdown toilet installation designed to provide a seat height of between 17" to 19" (430 to 485mm) measured to the top of the toilet seat. The closet bowl has been designed with rough-in of 10" (255mm) to 12" (305mm) provided by plastic offset outlet connector option. The tank incorporates the high performance outlet valve which has been specially developed with the 270 Easy Height elongated bowl to ensure optimum reliable fl ushing performance. Due to the substantial water saving benefi ts achieved by the 1.6/0.8 gpf (6/3 l) dual fl ush system, the toilet is suitable for multi-purpose applications where water conservation is important.Closet bowl: 270 Easy Height Elongated 1.6/0.8 gpf (6/3 l) full fl ush washdown closet bowl with
open fl ushing rim.Outlet: Floor mounted suitable for connection to waste outlet with offset plastic outlet connector
for 10" (255mm) to 12" (305mm) rough-in.Tank: Caravelle Tank – has a free fi tting lid and is suitable for domestic and light commercial
applications. Vandal Resistant Conversion Kit – A simple to install conversion is available for the standard mechanism to lock lid onto the tank, recommended for use in heavy duty commercial areas Code No.413276. High profi le buttons option for visually impaired Code No. 405067.
Weight: 94 lbs (43 kg).Water Control Valve:
Standard Bottom Entry Tank – available as left hand inlet and incorporates a super quiet water control assembly. Internal overfl ow only.
Fixing: The tank is fi xed directly to the closet bowl with a robust base fi xing system without the need for wall fi xing.
Seats: The following Caroma seats are recommended: Elongated Code No. 326307, Elongated Soft Close Code No. 326221, and Commercial Code No. 326813.
Colors: White and biscuit.Dimensions: All dimensions are in inches and millimetres and are subject to normal manufacturing
variations. Caroma pursues a policy of continuing improvement in design and performance of its products. The right is therefore reserved to vary specifi cations without notice.
73/4" (195mm) Inlet or overflow
Offset outlet Connector
143/8" (365mm)
51/2" (140mm)
18" (455mm min.)
311 /
4" (7
95m
m) a
ppro
x.
347 /
8" (8
85m
m) a
ppro
x.
163 /
4" (4
25m
m)
67/8
"(1
70m
m)
181 /
2" (4
70m
m) a
ppro
x.
17"
(430
mm
)
18"
(455
mm
)
12" (305mm)
Offset outlet Connector
163 /
4" (4
25m
m)
Inlet 21/4" (55mm)
Inlet 21/4" (55mm)
10" (255mm)
2"
(50m
m)
2" (50m
m)
3/4" (20mm) approx.
3/4" (20mm) approx.
(3/8
") 9m
m N
.P.S
sup
ply
10"
(255
mm
) 11" (280mm)
11" (280mm)
14" (355mm)
163 /
4" (4
25m
m)
Bot
tom
inle
t 16
3 /4"
(425
mm
)B
otto
m in
let
Note: All height dimensions to underside of closet bowl. Make allowance for bedding.
Screw fi xing: The closet bowl should be bedded with an approved silicon caulking and fi xed with corrosion resistant screws and closet bowl guard washers. Use Caroma screw fi xing kit. Code No. 601150.
Caravelle 270 Easy Height Elongated:
Code No.
Tank LH inlet 629435
Bowl 609120
Caroma Raised Push Button Option
�-�������� ������ ��� ��� & ������
�-�������� ������ ��� ��� & ������
CI/SfB(74.1) g3
DateOctober 2008
Supersedes all previous issues
2.4.5Caravelle 305 Round Front Plus 1.6/0.8 gpf (6/3 l) Water Saving Dual Flush High Effi ciency Toilet (HET)
Two Piece Ultra Low Flush (ULF) Vitreous China Washdown Toilet
Caroma International Pty Ltd. ABN 90 35 053 413 157
Caravelle 305 Round Front Plus 1.6/0.8 gpf (6/3 l) Dual Flush HET
Two Piece Ultra Low Flush (ULF) Vitreous China Washdown Toilet
A modern concept close coupled 1.6/0.8 gpf (6/3 l) Caravelle 305 dual fl ush toilet featuring unique two button activation providing substantial water saving compared to standard toilets. Adjustable rough-in and smooth rounded contours for easy cleaning. The closet bowl has been designed with a 12" (305mm) outlet rough-in. The tank incorporates the high performance outlet valve which has been specially developed with the 305 Round Front Plus bowl to ensure optimum reliable fl ushing performance. Due to the substantial water saving benefi ts achieved by the 1.6/0.8 gpf (6/3 l) dual fl ush system, the toilet is suitable for multi-purpose applications where water conservation is important.
Closet Bowl: 305 Round Front Plus 1.6/0.8 gpf (6/3 l) full fl ush washdown closet bowl with open fl ushing rim.
Outlet: Floor mounted 12" (305mm) outlet connection.
Tank: Caravelle Tank – has a free fi tting lid and is suitable for domestic and light commercial applications. Vandal Resistant Conversion Kit – A simple to install conversion is available for the standard mechanism to lock lid onto the tank, recommended for use in heavy duty commercial areas Code No. 413276.
Weight: 87 lbs (40 kg).
Water Control Valve:
Standard Bottom Entry Tank – available as left hand inlet and incorporates a super quiet water control assembly. Internal overfl ow only.
Fixing: The tank is fi xed directly to the closet bowl with a robust base fi xing system without the need for wall fi xing.
Seats: The following Caroma seats are recommended: Detachable Code No. 301032, Easy Closing Code No. 326222, and Standard Code No. 326707.
Colors: White and biscuit.
Dimensions: All dimensions are in inches and millimetres and are subject to normal manufacturing variations. Caroma pursues a policy of continuing improvement in design and performance of its products. The right is therefore reserved to vary specifi cations without notice.
73/4" (195mm) Inlet or overflow
163 /
4" (4
25m
m)
15"
(380
mm
)
327 /
8" (8
35m
m) a
ppro
x.
281 /
2" (7
25m
m) a
ppro
x.
143/8" (365mm)
141/4" (360mm)
12" (305mm) Center Line of Outlet 6" (152mm)
161 /
2" (4
20m
m) a
ppro
x.
63/4
" (1
70m
m)
Bolt Fixing Centre
Caravelle 2000 Cistern
1/4" (5mm) approx.
1/4" (5mm) approx.
Inlet 21/4" (55mm)
51/2" (140mm)
141 /
2" (3
70m
m)
Bot
tom
inle
t
Caravelle 305: Code No.
Tank LH inlet 629435
Bowl 609151
Note: All height dimensions to underside of closet bowl. Make allowance for bedding.
Closet bowl fi xing: The closet bowl should be bedded with an approved silicon caulking.
�-�������� ������ ��� ��� & ������
�-�������� ������ ��� ��� & ������
CI/SfB(74.1) g3
DateOctober 2008
Supersedes all previous issues
2.4.6Caravelle 305 Elongated1.6/0.8 gpf (6/3 l) Water Saving Dual Flush High Effi ciency Toilet (HET)
Two Piece Ultra Low Flush (ULF) Vitreous China Washdown Toilet
Caroma International Pty Ltd. ABN 90 35 053 413 157
Caravelle 305 Elongated 1.6/0.8 gpf (6/3 l) Dual Flush HET
Two Piece Ultra Low Flush (ULF) Vitreous China Washdown Toilet
A modern concept close coupled 1.6/0.8 gpf (6/3 l) Caravelle 305 Elongated dual fl ush toilet featuring unique two button activation providing substantial water saving compared to standard toilets. Adjustable rough-in and smooth rounded contours for easy cleaning. The closet bowl has been designed with a 12" (305mm) outlet rough-in. The tank incorporates the high performance outlet valve which has been specially developed with the 305 elongated bowl to ensure optimum reliable fl ushing performance. Due to the substantial water saving benefi ts achieved by the 1.6/0.8 gpf (6/3 l) dual fl ush system, the toilet is suitable for multi-purpose applications where water conservation is important. Closet Bowl: 305 Elongated 1.6/0.8 gpf (6/3 l) full fl ush washdown closet bowl with open fl ushing
rim.Outlet: Floor mounted 12" (305mm) outlet connection.Tank: Caravelle Tank – has a free fi tting lid and is suitable for domestic and light commercial
applications. Vandal Resistant Conversion Kit – A simple to install conversion is available for the standard mechanism to lock lid onto the tank, recommended for use in heavy duty commercial areas Code No. 413276.
Weight: 88 lbs (40 kg).Water Control Valve:
Standard Bottom Entry Tank – available as left hand inlet and incorporates a super quiet water control assembly. Internal overfl ow only.
Fixing: The tank is fi xed directly to the closet bowl with a robust base fi xing system without the need for wall fi xing.
Seats: The following Caroma seats are recommended: Elongated Code No. 326307, Elongated Soft Close Code No. 326221, and Commercial Code No. 326813.
Colors: White and biscuit.Dimensions: All dimensions are in inches and millimetres and are subject to normal manufacturing
variations. Caroma pursues a policy of continuing improvement in design and perform-ance of its products. The right is therefore reserved to vary specifi cations without notice.
73/4" (195mm) Inlet or overflow
163 /
4" (4
25m
m)
15"
(380
mm
)
327 /
8" (8
35m
m) a
ppro
x.
301 /
8" (7
65m
m) a
ppro
x.
143/8" (365mm)
14" (355mm)
12" (305mm) Center Line of Outlet 6" (152mm)
181 /
2" (4
70m
m) a
ppro
x.
63 /
4"
(170
mm
)
Bolt Fixing Centre
Caravelle 2000 Cistern
1/4" (5mm) approx.
1/4" (5mm) approx.
Inlet 21/4" (55mm)
51/2 " (140mm)
141 /
2" (3
70m
m)
Bot
tom
inle
t
Caravelle 305 Elongated: Code No.
Tank LH inlet 629435
Bowl 609130
Note: All height dimensions to underside of closet bowl. Make allowance for bedding.
Closet bowl fi xing: The closet bowl should be bedded with an approved silicon caulking.
�-�������� ������ ��� ��� & ������
�-�������� ������ ��� ��� & ������
CI/SfB(74.1) g3
DateOctober 2008
Supersedes all previous issues
2.5.1Caravelle One PieceRound Front Plus1.6/0.8 gpf (6/3 l) Water Saving Dual Flush High Effi ciency Toilet (HET)
One-piece Ultra Low Flush (ULF) Vitreous China Washdown Toilet
Caroma International Pty Ltd. ABN 90 35 053 413 157
Caravelle One Piece Round Front Plus 1.6/0.8 gpf (6/3 l) Dual Flush HET
One piece Ultra Low Flush (ULF) Vitreous China Washdown Toilet
A modern concept one piece toilet featuring an integral 1.6/0.8 gpf (6/3 l) Caravelle One Piece dual fl ush tank with unique two button activation providing substantial water saving compared to standard toilets. The one piece toilet is designed with smooth rounded contours with a concealed outlet for easy cleaning and also features low profi le push buttons. The tank incorporates a dual fl ush mechanism that has been specially developed with the Caravelle One Piece toilet to ensure optimum fl ushing performance. Due to the substantial water saving benefi ts achieved by the 1.6/0.8 gpf (6/3 l) dual fl ush system, the toilet is suitable for multi-purpose applications.
Toilet: Caravelle One Piece 1.6/0.8 gpf (6/3 l) full fl ush box rim.
Outlet: Floor mounted suitable for connection to waste outlet with offset plastic outlet connector for 10" (255mm) to 12" (305mm) rough-in.
Tank: The tank is an integral part of the toilet with a free fi tting lid and is suitable for domestic and light commercial applications. Available in dual fl ush 1.6/.8 gpf (6/3 l).
Water Control Valve:
Standard Bottom Entry – available as left hand inlet which incorporates a super quiet water control assembly. Internal overfl ow only.
Weight: 92 lbs (42 kgs)
Fixing: The one piece toilet is bonded to the fl oor with an approved acetic-cured silicon caulking and fi xed with corrosion resistant screws and closet bowl guard washers.
Seats: The following Caroma seats are recommended: Detachable Code No. 301032, Easy Closing Code No. 326222, and Standard Code No. 326707.
Colors: White and biscuit.
Dimensions: All dimensions are in inches and millimetres and are subject to normal manufacturing variations. Caroma pursues a policy of continuing improvement in design and performance of its products. The right is therefore reserved to vary specifi cations without notice.
Offset outletconnector
FinishedFloor
12" (305mm)Rough in
28 1
/2"
(725
mm
) app
rox.
14 3
/4"
(375
mm
)
2"
(50m
m)
2"
(50m
m)
143/4" (375mm)
293 /
4" (7
55m
m)
65/8
"(1
70m
m)
161 /
2 "
(420
mm
)
6" (152mm)
8 1/4" (210mm)
Inlet or overflow
Offset outletconnector
FinishedFloor
10" (255mm) Rough in
11" (280mm)
11" (280mm)
3/4" (20mm) approx.
3/4" (20mm) approx.
13 1
/2"
(345
mm
)B
otto
m In
let
13 1
/2"
(345
mm
)B
otto
m In
let
Inlet 23/4" (70mm)
Inlet 23/4" (70mm)
Note: All height dimensions to underside of closet bowl. Make allowance for bedding.
Screw fi xing: The closet bowl should be bedded with an approved silicon caulking and fi xed with corrosion resistant screws and closet bowl guard washers. Use Caroma screw fi xing kit. Code No. 601150.
Caravelle One-piece Toilet: Code No.
Bottom Inlet – Internal overfl ow
S trap LH inlet 989646
�-�������� ������ ��� ��� & ������
�-�������� ������ ��� ��� & ������
CI/SfB(74.1) g3
DateOctober 2008
Supersedes all previous issues
2.5.2Caravelle One Piece Easy Height Round Front Plus1.6/0.8 gpf (6/3 l) Water Saving Dual Flush High Effi ciency Toilet (HET)
One-piece Ultra Low Flush (ULF) Vitreous China Washdown Toilet
Caroma International Pty Ltd. ABN 90 35 053 413 157
Caravelle One Piece Easy Height Round Front Plus 1.6/0.8 gpf (6/3 l) Dual Flush HET
One piece Ultra Low Flush (ULF) Vitreous China Washdown Toilet
A modern concept one piece toilet features an integral 1.6/0.8 gpf (6/3 l) Caravelle Easy Height One Piece dual fl ush washdown toilet. Installation to provide a seat height of between 17" to 19" (430 to 485mm) measured to the top of the toilet seat. The one piece toilet is designed with smooth rounded contours with a concealed outlet for easy cleaning and also features low profi le push buttons. The tank incorporates a dual fl ush mechanism that has been specially developed with the Caravelle Easy Height One Piece toilet to ensure optimum fl ushing performance. Due to the substantial water saving benefi ts achieved by the 1.6/0.8 gpf (6/3 l) dual fl ush system, the toilet is suitable for multi-purpose applications.
Toilet: Caravelle Easy Height One Piece 1.6/0.8 gpf (6/3 l) full fl ush box rim.
Outlet: Floor mounted suitable for connection to waste outlet with offset plastic outlet connector for 10" (255mm) to 12" (305mm) rough-in.
Tank: The tank is an integral part of the toilet with a free fi tting lid and is suitable for domestic and light commercial applications. Available in dual fl ush 1.6/.8 gpf (6/3 l).
Water Control Valve:
Standard Bottom Entry – available as left hand inlet which incorporates a super quiet water control assembly. Internal overfl ow only.
Weight: 99 lbs (45 kg).
Fixing: The one piece toilet is bonded to the fl oor with an approved acetic-cured silicon caulking and fi xed with corrosion resistant screws and closet bowl guard washers.
Seats: The following Caroma seats are recommended: Detachable Code No. 301032, Easy Closing Code No. 326222, and Standard Code No. 326707.
Colors: White and biscuit.
Dimensions: All dimensions are in inches and millimetres and are subject to normal manufacturing variations. Caroma pursues a policy of continuing improvement in design and performance of its products. The right is therefore reserved to vary specifi cations without notice.
Offset outletconnector
12" (305mm)Rough in
30 1
/2"
(775
mm
) app
rox.
16 1
/2"
(420
mm
)
17 1
/2"
(445
mm
)
2"
(50m
m)
143/4" (375mm)
18" (455mm min.)
293 /
4" (7
55m
m)
65/8
"(1
70m
m)
161 /
2 "
(420
mm
)
6" (152mm)
2"
(50m
m)
Offset outletconnector
FinishedFloor
10" (255mm) Rough in
11" (280mm)
11" (280mm)
3/4" (20mm) approx.
3/4" (20mm) approx.
Inlet 23/4" (70mm)
Inlet 23/4" (70mm)
8 1/4" (210mm)
Inlet or overflow
15 1
/8"
(385
mm
)B
otto
m In
let
15 1
/8"
(385
mm
)B
otto
m In
let Note: All height dimensions to underside
of bowl. Make allowance for bedding.
Screw fi xing: The closet bowl should be bedded with an approved silicon caulking and fi xed with corrosion resistant screws and closet bowl guard washers. Use Caroma screw fi xing kit. Code No. 601150.
Caravelle Easy Height One-piece Toilet: Code No.
Bottom Inlet – Internal overfl ow
S trap LH inlet 989668
�-�������� ������ ��� ��� & ������
�-�������� ������ ��� ��� & ������
CI/SfB(74.1) g3
DateOctober 2008
Supersedes all previous issues
2.6.1Colonial 270Round Front Plus 1.6/0.8 gpf (6/3 l) Water Saving Dual Flush High Effi ciency Toilet (HET)
Two Piece Ultra Low fl ush (ULF) Vitreous China Washdown Toilet
Caroma International Pty Ltd. ABN 90 35 053 413 157
Colonial 270 Round Front Plus 1.6/0.8 gpf (6/3 l) Dual Flush HET
Two Piece Ultra Low fl ush (ULF) Vitreous China Washdown Toilet
An elegant, early 1900's, period piece concept close coupled 1.6/0.8 gpf (6/3 l) Colonial 270 dual fl ush toilet featuring unique two button activation providing substantial water saving compared to standard toilets. Adjustable rough-in and smooth rounded contours for easy cleaning. The closet bowl has been designed with rough-in of 10" (255mm) to 12" (305mm) provided by plastic offset outlet connector option. The tank incorporates the high performance outlet valve which has been specially developed with the Colonial 270 Round Front Plus bowl to ensure optimum reliable fl ushing performance. Due to the substantial water saving benefi ts achieved by the 1.6/0.8 gpf (6/3 l) dual fl ush system, the toilet is suitable for multi-purpose applications where water conservation is important.
Closet Bowl: Colonial 270 1.6/0.8 gpf (6/3 l) full fl ush washdown closet bowl with open fl ushing rim.
Outlet: Floor mounted suitable for connection to waste outlet with offset plastic outlet connector for 10" (255mm) to 12" (305mm) rough-in.
Tank: Colonial Tank – has a free fi tting lid and is suitable for domestic and light commercial applications.
Weight: 88 lbs (40 kg).Water Control Valve:
Standard Bottom Entry Tank – available as left hand inlet and incorporates a super quiet water control assembly. Internal overfl ow only.
Fixing: The tank is fi xed directly to the closet bowl with a robust base fi xing system without the need for wall fi xing.
Seats: The following Caroma seats are recommended: Detachable Code No. 301032, Easy Closing Code No. 326222, Standard Code No. 326707, and Wooden Code No. 326606.
Colors: White and biscuit.Dimensions: All dimensions are in inches and millimetres and are subject to normal manufacturing
variations. Caroma pursues a policy of continuing improvement in design and performance of its products. The right is therefore reserved to vary specifi cations without notice.
FinishedFloor
12” (305mm)
Inlet Inlet 21/2"(65mm)
2" (5
0mm
)
FinishedFloor
143/8" (365mm)
Offset outlet connector
15"
(380
mm
)
341 /
4" (8
70m
m) a
ppro
x.
3 /8"
(9m
m) I
.P.S
sup
ply 41/4"
(108mm)
161 /
2" (4
20m
m)
29"
(735
mm
) app
rox.
51/2"(140mm)
153/8" (390mm)
71/4
"(1
85m
m)
10" (255mm)
3/4"approx (20mm)
Inlet 21/2"(65mm)
FinishedFloor
Offset outlet connector
11" (280mm)
11" (280mm)
2" (5
0mm
)
Note: All height dimensions to underside of closet bowl. Make allowance for bedding.
Screw fi xing: The closet bowl should be bedded with an approved silicon caulking and fi xed with corrosion resistant screws and closet bowl guard washers. Use Caroma screw fi xing kit. Code No. 601150.
Colonial 270: Code No.
Tank LH inlet 625070
Bowl 605310
�-�������� ������ ��� ��� & ������
�-�������� ������ ��� ��� & ������
CI/SfB(74.1) g3
DateOctober 2008
Supersedes all previous issues
2.6.2Colonial 270 Easy Height Round Front Plus 1.6/0.8 gpf (6/3 l) Water Saving Dual Flush High Effi ciency Toilet (HET)
Two Piece Ultra Low Flush (ULF) Vitreous China Washdown Toilet
Caroma International Pty Ltd. ABN 90 35 053 413 157
Colonial 270 Easy Height Round Front Plus 1.6/0.8 gpf (6/3 l) Dual Flush HET
Two Piece Ultra Low Flush (ULF) Vitreous China Washdown Toilet
An elegant, early 1900's, period piece concept close coupled 1.6/0.8 gpf (6/3 l) Colonial 270 Easy Height dual fl ush washdown toilet installation designed to provide a seat height of between 17" to 19" (430 to 485mm) measured to the top of the toilet seat. The closet bowl has been designed with rough-in of 10" (255mm) to 12" (305mm) provided by plastic offset outlet connector option. The tank incorporates the high performance outlet valve which has been specially developed with the Colonial 270 Easy Height Round Front Plus bowl to ensure optimum reliable fl ushing performance. Due to the substantial water saving benefi ts achieved by the 1.6/0.8 gpf (6/3 l) dual fl ush system, the toilet is suitable for multi-purpose applications where water conservation is important.
Closet bowl: Colonial 270 Easy Height 1.6/0.8 gpf (6/3 l) full fl ush washdown closet bowl with open fl ushing rim.
Outlet: Floor mounted suitable for connection to waste outlet with offset plastic outlet connector for 10" (255mm) to 12" (305mm) rough-in.
Tank: Colonial Tank – has a free fi tting lid and is suitable for domestic and light commercial applications. Vandal Resistant Conversion Kit – A simple to install conversion is available for the standard mechanism to lock lid onto the tank, recommended for use in heavy duty commercial areas. Code No. 413276.
Weight: 88 lbs (40 kg).Water Control Valve:
Standard Bottom Entry Tank – available as left hand inlet and incorporates a super quiet water control assembly. Internal overfl ow only.
Fixing: The tank is fi xed directly to the closet bowl with a robust base fi xing system without the need for wall fi xing.
Seats: The following Caroma seats are recommended: Detachable Code No. 301032, Easy Closing Code No. 326222, Standard Code No. 326707, and Wooden Code No. 326606.
Colors: White and biscuit.Dimensions: All dimensions are in inches and millimetres and are subject to normal manufacturing
variations. Caroma pursues a policy of continuing improvement in design and performance of its products. The right is therefore reserved to vary specifi cations without notice.
FinishedFloor
12” (305mm)
Inlet 21/2"(65mm)
FinishedFloor
143/8" (365mm)
Offset outlet connector
16"
(408
mm
)
351 /
2" (9
00m
m) a
ppro
x.
3 /8"
(9m
m) I
.P.S
sup
ply
161 /
2" (4
20m
m)
29"
(735
mm
) app
rox.
51/2"(140mm)
153/8" (390mm)1" (25mm) approx.
1" (25mm) approx.
71/4
"(1
85m
m)
17"
(430
mm
)B
otto
m In
let
17"
(430
mm
)B
otto
m In
let
173 /
8" (4
40m
m)
10" (255mm)
Inlet 21/2"(65mm)
21/4
"
FinishedFloor
Offset outlet connector
11" (280mm)
11" (280mm)
21/4
"
Inlet 41/4"(108mm) 17
1 /4"
(439
mm
)17
1 /4"
(439
mm
)
Note: All height dimensions to underside of bowl. Make allowance for bedding.
Screw fi xing: The closet bowl should be bedded with an approved silicon caulking and fi xed with corrosion resistant screws and closet bowl guard washers. Use Caroma screw fi xing kit. Code No. 601150.
Colonial 270 Easy Height Code No.
Tank LH inlet 625070
Bowl 605320
�-�������� ������ ��� ��� & ������
c -UPCIAPMO listed for USA & Canada
CI/SfB(74.1) g3
DateMay 2009
Supersedes all previous issues
Profile Smart 305 Round Front Plus 1.28/0.8 gpf (4.8/3 l) Water Saving Dual Flush High Efficiency Toilet (HET)
Two Piece Ultra Low Flush (ULF) Vitreous China Washdown Toilet with Integrated Sink
Caroma International Pty Ltd. ABN 90 35 053 413 157
Profile Smart 305 Round Front Plus 1.28/0.8 gpf (4.8/3 l) Dual Flush HET
Two Piece Ultra Low Flush (ULF) Vitreous China Washdown Toiletwith Integral Sink
A modern concept close coupled washdown 1.28/0.8 gpf (4.8/3 l) Profile Smart 305 dual flush high efficiency toilet (HET) featuring a screw down fitted sink with unique two button activation providing substantial water savings compared to other HET or standard toilets and smooth rounded contours for easy cleaning. The closet bowl has been designed with a 12” (305mm) outlet rough-in. The Profile tank with sink is an integrated system comprising of tank with high performance outlet valve and fitted with low profile push buttons. An innovative dual-flush push button and faucet combination that saves water by allowing the same water to be used for two purposes. Fresh water is first used for hand washing and then flows into the tank to ultimately flush the toilet.
Closet Bowl: 305 Round Front Plus 1.28/0.8 gpf (4.8/3 l) full flush washdown closet bowl with boxed flushing rim.
Outlet: Floor mounted 305 outlet connection.Tanks: Profile Smart Tank – with a screw down integrated sink. Suitable for domestic and
light commercial applications.Weight: 96 lbs (44 kg).Water Control Valve:
Standard Bottom Entry Tank – available as left hand inlet and incorporates a super quiet water control assembly. Internal overflow only.
Fixing: The tank is fixed directly to the closet bowl with a robust base fixing system without the need for wall fixing.
Seats: The following Caroma seats are recommended: Detachable Code No.301032,Colors: White only.Dimensions: All dimensions are in inches and millimetres and are subject to normal manufacturing vari-
ations. Caroma pursues a policy of continuing improvement in design and performance of its products. The right is therefore reserved to vary specifications without notice.
260 Inlet or overflow
15" (
380m
m)
357 /8
" (91
1mm
) app
rox.
421 /4
" (10
73m
m) a
ppro
x.
273 /4
" (70
5mm
) app
rox.
15 " (383mm)
141/4" (360mm)
12" (305mm)Center Line of Outlet6"(152mm)
161 /2
" (42
0mm
) app
rox.
Bolt Fixing Centre
9" (2
30m
m)
1" (25mm) approx.
51/2"(140mm)
141 /
2" (3
70m
m)
Bott
om in
let
227 /8
" (58
0mm
)
243 /4
" (63
0mm
)
95/8" (245mm)
(3 /8"
) 9m
m N
.P.S
supp
ly 1
0" (2
55m
m)
Inlet 21/4" (55mm)
Profile Smart 305: Code No.
Tank LH inlet 840420
Bowl 609151A
c -UPCIAPMO listed for USA & Canada
Note: All height dimensions to underside of closet bowl, make allowance for bedding.
Closet bowl fixing: The closet bowl should be bedded with an approved silicon caulking.
�-�������� ������ ��� ��� & ������
CI/SfB(74.1) g3
DateOctober 2008
Supersedes all previous issues
2.7.1Royale 270 Round Front Plus1.6/0.8 gpf (6/3 l) Water Saving Dual Flush High Effi ciency Toilet (HET)
Two Piece Ultra Low Flush (ULF) Vitreous China Washdown Toilet
Caroma International Pty Ltd. ABN 90 35 053 413 157
Royale 270 Round Front Plus 1.6/0.8 gpf (6/3 l) Dual Flush HET
Two Piece Ultra Low Flush (ULF) Vitreous China Washdown Toilet
A modern concept close coupled 1.6/0.8 gpf (6/3 l) Royale 270 dual fl ush toilet featuring unique two button activation providing substantial water saving compared to standard toilets. Adjustable rough-in and smooth rounded contours for easy cleaning. The closet bowl has been designed with rough-in of 10" (255mm) to 12" (305mm) provided by plastic offset outlet connector option. The tank incorporates the high performance outlet valve which has been specially developed with the 270 Round Front Plus bowl to ensure optimum reliable fl ushing performance. Due to the substantial water saving benefi ts achieved by the 1.6/0.8 gpf (6/3 l) dual fl ush system, the toilet is suitable for multi-purpose applications where water conservation is important.
Closet Bowl: 270 Round Front Plus 1.6/0.8 gpf (6/3 l) full fl ush washdown closet bowl with open fl ushing rim.
Outlet: Floor mounted suitable for connection to waste outlet with offset plastic outlet connector for 10" (255mm) to 12" (305mm) rough-in.
Tank: Royale Tank – has a free fi tting lid and is suitable for domestic and light commercial applications. Vandal Resistant Conversion Kit – A simple to install conversion is available for the standard mechanism to lock lid onto the tank, recommended for use in heavy duty commercial areas Code No. 413276.
Weight: 86 lbs (39 kg).Water Control Valve:
Standard Bottom Entry Tank – available as left hand inlet and incorporates a super quiet water control assembly. Internal overfl ow only.
Fixing: The tank is fi xed directly to the closet bowl with a robust base fi xing system without the need for wall fi xing.
Seats: The following Caroma seats are recommended: Detachable Code No. 301032, Easy Closing Code No. 326222, Standard Code No. 326707, and Wooden Code No. 326606.
Color: Biscuit.Dimensions: All dimensions are in inches and millimetres and are subject to normal manufacturing
variations. Caroma pursues a policy of continuing improvement in design and perform-ance of its products. The right is therefore reserved to vary specifi cations without notice.
51/2" (140mm)
141/4" (360mm)
161 /
2" (4
20m
m) a
ppro
x.
161 /
8" (4
10m
m)
73/4
"(1
95m
m)
161 /
8" (4
10m
m)
Inlet 23/8" (60mm)
Inlet 23/8" (60mm)
Offset outlet Connector
163/4" (425mm)
29"
(740
mm
) app
rox.
32
1 /4"
(820
mm
) app
rox.
15"
(380
mm
)
12" (305mm)
Offset outlet Connector 10" (255mm)
2" (50m
m)
2" (50m
m)
3/4" (20mm) approx. 3/4" (20mm) approx.
(3/8
") 9m
m N
.P.S
sup
ply
10"
(255
mm
) 11" (280mm)
11" (280mm)
73/4" (195mm)Inlet or overflow
141 /
2" (3
70m
m)
Bot
tom
inle
t 14
1 /2"
(370
mm
)B
otto
m in
let
Note: All height dimensions to underside of closet bowl. Make allowance for bedding.
Screw fi xing: The closet bowl should be bedded with an approved silicon caulking and fi xed with corrosion resistant screws and closet bowl guard washers. Use Caroma screw fi xing kit. Code No. 601150.
Royale 270 Code No.
Tank LH inlet 624530
Bowl 609159
�-�������� ������ ��� ��� & ������
�-�������� ������ ��� ��� & ������
CI/SfB(74.1) g3
DateOctober 2008
Supersedes all previous issues
2.7.2Royale 270 Easy Height Round Front Plus 1.6/0.8 gpf (6/3 l) Water Saving Dual Flush High Effi ciency Toilet (HET)
Two Piece Ultra Low Flush (ULF) Vitreous China Washdown Toilet
Caroma International Pty Ltd. ABN 90 35 053 413 157
Royale 270 Easy Height Round Front Plus1.6/0.8 gpf (6/3 l) Dual Flush HET
Two Piece Ultra Low Flush (ULF) Vitreous China Washdown Toilet
A modern concept close coupled 1.6/0.8 gpf (6/3 l) Royale 270 Easy Height dual fl ush washdown toilet installation designed to provide a seat height of between 17" to 19" (430 to 485mm) measured to the top of the toilet seat. The closet bowl has been designed with rough-in of 10" (255mm) to 12" (305mm) provided by plastic offset outlet connector option. The tank incorporates the high performance outlet valve which has been specially developed with the 270 Easy Height Round Front Plus bowl to ensure optimum reliable fl ushing performance. Due to the substantial water saving benefi ts achieved by the 1.6/0.8 gpf (6/3 l) dual fl ush system, the toilet is suitable for multi-purpose applications where water conservation is important.
Closet bowl: 270 Easy Height Round Front Plus 1.6/0.8 gpf (6/3 l) full fl ush washdown closet bowl with open fl ushing rim.
Outlet: Floor mounted suitable for connection to waste outlet with offset plastic outlet connector for 10" (255mm) to 12" (305mm) rough-in.
Tank: Royale Tank – has a free fi tting lid and is suitable for domestic and light commercial applications. Vandal Resistant Conversion Kit – A simple to install conversion is available for the standard mechanism to lock lid onto the tank, recommended for use in heavy duty commercial areas Code No.413276. High profi le buttons option for visually impaired Code No. 405067.
Weight: 96 lbs (44 kg).Water Control Valve:
Standard Bottom Entry Tank – available as left hand inlet and incorporates a super quiet water control assembly. Internal overfl ow only.
Fixing: The tank is fi xed directly to the closet bowl with a robust base fi xing system without the need for wall fi xing.
Seats: The following Caroma seats are recommended: Detachable Code No. 301032, Easy Closing Code No. 326222, Standard Code No. 326707, and Wooden Code No. 326606.
Color: Biscuit.Dimensions: All dimensions are in inches and millimetres and are subject to normal manufacturing
variations. Caroma pursues a policy of continuing improvement in design and performance of its products. The right is therefore reserved to vary specifi cations without notice.
Offset outlet Connector
51/2" (140mm)
18" (455mm min.)
29"
(740
mm
) app
rox.
341 /
4" (8
70m
m) a
ppro
x.
161 /
2" (4
20m
m) a
ppro
x.
17"
(430
mm
)
18"
(455
mm
)
12" (305mm)
Offset outlet Connector 10" (255mm)
2" (50m
m)
2" (50m
m)
3/4" (20mm) approx.
3/4" (20mm) approx.
(3/8
") 9m
m N
.P.S
sup
ply
10"
(255
mm
) 11" (280mm)
11" (280mm)
141/4" (360mm)
163/4" (425mm)
161 /
8" (4
10m
m)
73/4
"(1
95m
m)
161 /
8" (4
10m
m)
Inlet 23/8" (60mm)
Inlet 23/8" (60mm)
73/4" (195mm)Inlet or overflow
163 /
4" (4
25m
m)
Bot
tom
inle
t 16
3 /4"
(425
mm
)B
otto
m in
let
Note: All height dimensions to underside of closet bowl. Make allowance for bedding.
Screw fi xing: The closet bowl should be bedded with an approved silicon caulking and fi xed with corrosion resistant screws and closet bowl guard washers. Use Caroma screw fi xing kit. Code No. 601150.
Royale 270 Easy Height Code No.
Tank LH inlet 624530
Bowl 609177
Caroma Raised Push Button Option
�-�������� ������ ��� ��� & ������
�-�������� ������ ��� ��� & ������
CI/SfB(74.1) g3
DateOctober 2008
Supersedes all previous issues
2.7.3Royale 270 Elongated1.6/0.8 gpf (6/3 l) Water Saving Dual Flush High Effi ciency Toilet (HET)
Two Piece Ultra Low Flush (ULF) Vitreous China Washdown Toilet
Caroma International Pty Ltd. ABN 90 35 053 413 157
Royale 270 Elongated1.6/0.8 gpf (6/3 l) Dual Flush HET
Two Piece Ultra Low Flush (ULF) Vitreous China Washdown Toilet
A modern concept close coupled 1.6/0.8 gpf (6/3 l) Royale 270 Elongated dual fl ush toilet featuring unique two button activation providing substantial water saving compared to standard toilets. Adjustable rough-in and smooth rounded contours for easy cleaning. The closet bowl has been designed with rough-in of 10" (255mm) to 12" (305mm) provided by plastic offset outlet connector option. The tank incorporates the high performance outlet valve which has been specially developed with the 270 elongated bowl to ensure optimum reliable fl ushing performance. Due to the substantial water saving benefi ts achieved by the 1.6/0.8 gpf (6/3 l) dual fl ush system, the toilet is suitable for multi-purpose applications where water conservation is important. Closet Bowl: 270 Elongated 1.6/0.8 gpf (6/3 l) full fl ush washdown closet bowl with open fl ushing
rim.Outlet: Floor mounted suitable for connection to waste outlet with offset plastic outlet
connector for 10" (255mm) to 12" (305mm) rough-in.Tank: Royale Tank – has a free fi tting lid and is suitable for domestic and light commercial
applications. Vandal Resistant Conversion Kit – A simple to install conversion is available for the standard mechanism to lock lid onto the tank, recommended for use in heavy duty commercial areas. Code No. 413276.
Weight: 90 lbs (41 kg).Water Control Valve:
Standard Bottom Entry Tank – available as left hand inlet and incorporates a super quiet water control assembly. Internal overfl ow only.
Fixing: The tank is fi xed directly to the closet bowl with a robust base fi xing system without the need for wall fi xing.
Seats: The following Caroma seats are recommended: Elongated Code No. 326307, Elongated Soft Close Code No. 326221, and Commercial Code No. 326813.
Color: Biscuit.Dimensions: All dimensions are in inches and millimetres and are subject to normal manufacturing
variations. Caroma pursues a policy of continuing improvement in design and performance of its products. The right is therefore reserved to vary specifi cations without notice.
73/4" (195mm)Inlet or overflow
14" (355mm)
181 /
2" (4
70m
m) a
ppro
x.
Offset outlet Connector
163/4" (425mm)
51/2" (140mm)
311 /
4" (7
95m
m) a
ppro
x.32
1 /4"
(820
mm
) app
rox.
161 /
8" (4
10m
m)
73/4
"(1
95m
m)
15"
(380
mm
)
12" (305mm)
Offset outlet Connector
161 /
8" (4
10m
m)
Inlet 21/8" (60mm)
Inlet 21/8" (60mm)
10" (255mm)
2" (50m
m)
3/4" (20mm) approx.
3/4" (20mm) approx.
(3 /
8") 9
mm
N.P
.S s
uppl
y 1
0" (2
55m
m)
11" (280mm)
11" (280mm)
2" (50m
m)
141 /
2" (3
70m
m)
Bot
tom
inle
t 14
1 /2"
(370
mm
)B
otto
m in
let
Note: All height dimensions to underside of closet bowl. Make allowance for bedding.
Screw fi xing: The closet bowl should be bedded with an approved silicon caulking and fi xed with corrosion resistant screws and closet bowl guard washers. Use Caroma screw fi xing kit. Code No. 601150.
Royale 270 Elongated Code No.
Tank LH inlet 624530
Bowl 609100
�-�������� ������ ��� ��� & ������
�-�������� ������ ��� ��� & ������
CI/SfB(74.1) g3
DateOctober 2008
Supersedes all previous issues
2.7.4Royale 270 Easy Height Elongated1.6/0.8 gpf (6/3 l) Water Saving Dual Flush High Effi ciency Toilet (HET)
Two Piece Ultra Low Flush (ULF) Vitreous China Washdown Toilet
Caroma International Pty Ltd. ABN 90 35 053 413 157
Royale 270 Easy Height Elongated 1.6/0.8 gpf (6/3 l) Dual Flush HET
Two Piece Ultra Low Flush (ULF) Vitreous China Washdown Toilet
A modern concept close coupled 1.6/0.8 gpf (6/3 l) Royale 270 Easy Height Elongated dual fl ush washdown toilet designed to provide a seat height of between 17" to 19" (430 to 485mm) measured to the top of the toilet seat. The closet bowl has been designed with rough-in of 10" (255mm) to 12" (305mm) provided by plastic offset outlet connector option. The tank incorporates the high performance outlet valve which has been specially developed with the 270 Easy Height elongated bowl to ensure optimum reliable fl ushing performance. Due to the substantial water saving benefi ts achieved by the 1.6/0.8 gpf (6/3 l) dual fl ush system, the toilet is suitable for multi-purpose applications where water conservation is important.Closet bowl: 270 Easy Height Elongated 1.6/0.8 gpf (6/3 l) full fl ush washdown closet bowl with
open fl ushing rim.Outlet: Floor mounted suitable for connection to waste outlet with offset plastic outlet connector
for 10" (255mm) to 12" (305mm) rough-in.Tank: Royale Tank – has a free fi tting lid and is suitable for domestic and light commercial
applications. Vandal Resistant Conversion Kit – A simple to install conversion is available for the standard mechanism to lock lid onto the tank, recommended for use in heavy duty commercial areas Code No. 413276. High profi le buttons option for visually impaired Code No. 405067.
Weight: 96 lbs (44 kg).Water Control Valve:
Standard Bottom Entry Tank – available as left hand inlet and incorporates a super quiet water control assembly. Internal overfl ow only.
Fixing: The tank is fi xed directly to the closet bowl with a robust base fi xing system without the need for wall fi xing.
Seats: The following Caroma seats are recommended: Elongated Code No. 326307, Elongated Soft Close Code No. 326221, and Commercial Code No. 326813.
Color: Biscuit.Dimensions: All dimensions are in inches and millimetres and are subject to normal manufacturing
variations. Caroma pursues a policy of continuing improvement in design and performance of its products. The right is therefore reserved to vary specifi cations without notice.
163/4" (425mm)16
1 /8"
(410
mm
)
73/4
"(1
95m
m)
161 /
8" (4
10m
m)
Inlet 21/8" (60mm)
Inlet 21/8" (60mm)73/4" (195mm)
Inlet or overflow
Offset outlet Connector
51/2" (140mm)
18" (455mm min.)
311 /
4" (7
95m
m) a
ppro
x.
341 /
4" (8
70m
m) a
ppro
x.
181 /
2" (4
70m
m) a
ppro
x.
17"
(430
mm
)
18"
(455
mm
)
12" (305mm)
Offset outlet Connector 10" (255mm)
2" (50m
m)
2" (50m
m)
3/4" (20mm) approx.
3/4" (20mm) approx.
(3/8
") 9m
m N
.P.S
sup
ply
10"
(255
mm
) 11" (280mm)
11" (280mm)
14" (355mm)
163 /
4" (4
25m
m)
Bot
tom
inle
t 16
3 /4"
(425
mm
)B
otto
m in
let
Note: All height dimensions to underside of closet bowl. Make allowance for bedding.
Screw fi xing: The closet bowl should be bedded with an approved silicon caulking and fi xed with corrosion resistant screws and closet bowl guard washers. Use Caroma screw fi xing kit. Code No. 601150.
Royale 270 Easy Height Elongated Code No.
Tank LH inlet 624530
Bowl 609120
Caroma Raised Push Button Option
�-�������� ������ ��� ��� & ������
�-�������� ������ ��� ��� & ������
CI/SfB(74.1) g3
DateOctober 2008
Supersedes all previous issues
2.7.5Royale 305 Round Front Plus1.6/0.8 gpf (6/3 l) Water Saving Dual Flush High Effi ciency Toilet (HET)
Two Piece Ultra Low Flush (ULF) Vitreous China Washdown Toilet
Caroma International Pty Ltd. ABN 90 35 053 413 157
Royale 305 Round Front Plus 1.6/0.8 gpf (6/3 l) Dual Flush HET
Two Piece Ultra Low Flush (ULF) Vitreous China Washdown Toilet
A modern concept close coupled washdown 1.6/0.8 gpf (6/3 l) Royale 305 dual fl ush toilet featuring unique two button activation providing substantial water saving compared to standard toilets and smooth rounded contours for easy cleaning. The closet bowl has been designed with a 12" (305mm) outlet rough-in. The tank incorporates the high performance outlet valve which has been specially developed with the 305 Round Front Plus bowl to ensure optimum fl ushing performance. Due to the substantial water saving benefi ts achieved by the 1.6/0.8 gpf (6/3 l) dual fl ush system, the toilet is suitable for multi-purpose applica-tions where water conservation is important.
Closet bowl: 305 Round Front Plus 1.6/0.8 gpf (6/3 l) full fl ush washdown closet bowl with open fl ushing rim.
Outlet: Floor mounted 305 outlet connection.
Tank: Royale Tank – has a free fi tting lid and is suitable for domestic and light commercial applications. Vandal Resistant Conversion Kit – A simple to install conversion is available for the standard mechanism to lock lid onto the tank, recommended for use in heavy duty commercial areas Code No. 413276.
Weight: 89 lbs (40 kg).
Water Control Valve:
Standard Bottom Entry Tank – available as left hand inlet and incorporates a super quiet water control assembly. Internal overfl ow only.
Fixing: The tank is fi xed directly to the closet bowl with a robust base fi xing system without the need for wall fi xing.
Seats: The following Caroma seats are recommended: Detachable Code No. 301032, Easy Closing Code No. 326222, Standard Code No. 326707, and Wooden Code No. 326606.
Color: Biscuit.
Dimensions: All dimensions are in inches and millimetres and are subject to normal manufacturing variations. Caroma pursues a policy of continuing improvement in design and perform-ance of its products. The right is therefore reserved to vary specifi cations without notice.
51/2" (140mm)
163/4" (425mm)
161 /
2" (4
20m
m) a
ppro
x.
161 /
8" (4
10m
m)
1/4" (5mm) approx.
1/4" (5mm) approx.
� 141/4" (360mm)
� 15"
(380
mm
)
281 /
2" (7
25m
m) a
ppro
x.
12" (305mm)
73/4
"(1
95m
m)
Inlet 23/8" (60mm)
6"(152mm)
Bolt Fixing Centre
Inlet or overflow73/4" (195mm)
321 /
4" (8
20m
m) a
ppro
x.
141 /
2" (3
70m
m)
Bot
tom
inle
t
Note: All height dimensions to underside of closet bowl. Make allowance for bedding.
Closet bowl fi xing: The closet bowl should be bedded with an approved silicon caulking.
Royale 305 Code No.
Tank LH inlet 624530
Bowl 609151
�-�������� ������ ��� ��� & ������
�-�������� ������ ��� ��� & ������
CI/SfB(74.1) g3
DateOctober 2008
Supersedes all previous issues
2.7.6Royale 305 Elongated1.6/0.8 gpf (6/3 l) Water Saving Dual Flush High Effi ciency Toilet (HET)
Two Piece Ultra Low Flush (ULF) Vitreous China Washdown Toilet
Caroma International Pty Ltd. ABN 90 35 053 413 157
Royale 305 Elongated1.6/0.8 gpf (6/3 l) Dual Flush HET
Two Piece Ultra Low Flush (ULF) Vitreous China Washdown Toilet
A modern concept close coupled washdown 1.6/0.8 gpf (6/3 l) Royale 305 Elongated dual fl ush toilet featuring unique two button activation providing substantial water saving compared to standard toilets and smooth rounded contours for easy cleaning. The closet bowl has been designed with a 12" (305 mm) outlet rough-in. The tank incorporates the high performance outlet valve which has been specially developed with the 305 elongated bowl to ensure optimum fl ushing performance. Due to the substantial water saving benefi ts achieved by the 1.6/0.8 gpf (6/3 l) dual fl ush system, the toilet is suitable for multi-purpose applica-tions where water conservation is important.
Closet bowl: 305 Elongated 1.6/0.8 gpf (6/3 l) full fl ush washdown closet bowl with open fl ushing rim.
Outlet: Floor mounted 305 elongated outlet connection.Tank: Royale Tank – has a free fi tting lid and is suitable for domestic and light commercial
applications. Vandal Resistant Conversion Kit – A simple to install conversion is available for the standard mechanism to lock lid onto the tank, recommended for use in heavy duty commercial areas Code No. 413276.
Weight: 90 lbs (41 kg).Water Control Valve:
Standard Bottom Entry Tank – available as left hand inlet and incorporates a super quiet water control assembly. Internal overfl ow only.
Fixing: The tank is fi xed directly to the closet bowl with a robust base fi xing system without the need for wall fi xing.
Seats: The following Caroma seats are recommended: Elongated Code No. 326307, Elongated Soft Close Code No. 326221, and Commercial Code No. 326813.
Color: Biscuit.Dimensions: All dimensions are in inches and millimetres and are subject to normal manufacturing
variations. Caroma pursues a policy of continuing improvement in design and perform-ance of its products. The right is therefore reserved to vary specifi cations without notice.
73/4" (195mm)Inlet or overflow
161 /
8" (4
10m
m)
15"
(380
mm
)
321 /
4" (8
20m
m) a
ppro
x.
301 /
8" (7
65m
m) a
ppro
x.
163/4" (425mm)
14" (355mm)
12" (305mm)Center Line of Outlet6" (152mm)
181 /
2" (4
70m
m) a
ppro
x.73
/4"
(195
mm
)
Bolt Fixing Centre
RoyaleCistern
1/4" (5mm) approx.
1/4" (5mm) approx.
Inlet 23/8" (60mm)
51/2 " (140mm)
141 /
2" (3
70m
m)
Bot
tom
inle
t
Note: All height dimensions to underside of closet bowl. Make allowance for bedding.
Closet bowl fi xing: The closet bowl should be bedded with an approved silicon caulking.
Royale 305 Elongated Code No.
Tank LH inlet 624530
Bowl 609130
�-�������� ������ ��� ��� & ������
�-�������� ������ ��� ��� & ������
CI/SfB(74.1) g3
DateOctober 2008
Supersedes all previous issues
2.8.1Sydney Low Profi le 270 Round Front Plus 1.6/0.8 gpf (6/3 l) Water Saving Dual Flush High Effi ciency Toilet (HET)
Two Piece Ultra Low Flush (ULF) Vitreous China Washdown Toilet
Caroma International Pty Ltd. ABN 90 35 053 413 157
Sydney Low Profi le 270 Round Front Plus1.6/0.8 gpf (6/3 l) Dual Flush HET
Two Piece Ultra Low Flush (ULF) Vitreous China Washdown Toilet
A modern concept close coupled 1.6/0.8 gpf (6/3 l) Sydney Low Profi le 270 dual fl ush high effi ciency toilet (HET) featuring unique two button activation providing substantial water saving compared to standard toilets. Adjustable rough-in and smooth rounded contours for easy cleaning. The closet bowl has been designed with rough-in of 10" (255mm) to 12" (305mm) provided by plastic offset outlet connector option. This tank is a low profi le design for greater installation versatility which incorporates a high performance outlet valve that has been specially developed with the 270 Round Front Plus bowl to ensure optimum reliable fl ushing performance. Due to the substantial water saving benefi ts achieved by the 1.6/0.8 gpf (6/3 l) dual fl ush system, the toilet is suitable for multi-purpose applications where water conservation is important.
Closet Bowl: 270 Round Front Plus 1.6/0.8 gpf (6/3 l) full fl ush washdown closet bowl with open fl ushing rim.
Outlet: Floor mounted suitable for connection to waste outlet with offset plastic outlet connector for 10" (255mm) to 12" (305mm) rough-in.
Tank: Sydney Low Profi le Tank – has a free fi tting lid and is suitable for domestic and light commercial applications. Vandal Resistant Conversion Kit – A simple to install conversion is available for the standard mechanism to lock lid onto the tank, recommended for use in heavy duty commercial areas Code No. 750110.
Weight: 76 lbs (35 kg).Water Control Valve:
Standard Bottom Entry Tank – available as left hand inlet and incorporates a super quiet water control assembly. Internal overfl ow only.
Fixing: The tank is fi xed directly to the closet bowl with a robust base fi xing system without the need for wall fi xing.
Seats: The following Caroma seats are recommended: Detachable Code No. 301032, Easy Closing Code No. 326222 and Standard Code No. 326707.
Color: White.Dimensions: All dimensions are in inches and millimetres and are subject to normal manufacturing vari-
ations. Caroma pursues a policy of continuing improvement in design and performance of its products. The right is therefore reserved to vary specifi cations without notice.
Offset outlet Connector
51/2" (140mm)
141/4" (360mm)
29"
(740
mm
) app
rox.
161 /
2" (4
20m
m) a
ppro
x.
2"
(50m
m)
(3/8
") 9m
m N
.P.S
sup
ply
10"
(255
mm
) 11" (280mm)
73/4" (195mm) Inlet or overflow Inlet 21/4" (55mm)
67/8
"(1
75m
m)
141 /
2 "
(370
mm
)B
otto
m in
let
Sydney Low Profile Cistern
11"
(280
mm
)
18 3/4" (475mm)
15"
(380
mm
)
261 /
2" (6
75m
m) a
ppro
x.
233 /
4" (6
05m
m)
25"
(635
mm
)
103/4" (275mm)
10" (255mm)
12" (305mm)
3/4" (20mm) approx.
Note: All height dimensions to underside of bowl. Make allowance for bedding.
Screw fi xing: The closet bowl should be bedded with an approved silicon caulking and fi xed with corrosion resistant screws and closet bowl guard washers. Use Caroma screw fi xing kit. Code No. 601150.
Sydney Low Profi le 270: Code No.
Tank LH inlet 622330
Bowl 609159
�-�������� ������ ��� ��� & ������
�-�������� ������ ��� ��� & ������
CI/SfB(74.1) g3
DateOctober 2008
Supersedes all previous issues
2.8.2Sydney Low Profi le 270 Easy Height Round Front Plus 1.6/0.8 gpf (6/3 l) Water Saving Dual Flush High Effi ciency Toilet (HET)
Two Piece Ultra Low Flush (ULF) Vitreous China Washdown Toilet
Caroma International Pty Ltd. ABN 90 35 053 413 157
Sydney Low Profi le 270 Easy Height Round Front Plus 1.6/0.8 gpf (6/3 l) Dual Flush HET
Two Piece Ultra Low Flush (ULF) Vitreous China Washdown Toilet
A modern concept close coupled 1.6/0. 8gpf (6/3 l) Sydney Low Profi le 270 Easy Height dual fl ush high effi ciency toilet (HET) designed to provide a seat height of between 17" to 19" (430 to 485mm) measured to the top of the toilet seat. This tank is a low profi le design for greater installation versatility which incorporates a high performance outlet valve that has been specially developed with the 270 Easy Height Round Front Plus bowl to ensure optimum reliable fl ushing performance. Important: The Sydney Low Profi le 270 Easy Height dual fl ush washdown toilet will comply with the Americans with Disabilities Act when installed to Easy Height Standards for Accessible Design, Section 4.16 Water Closets. Further reference must be made to the relevant sections of Easy Height Standards For Accessible Design with current amendments to determine clear fl oor space, grab bar, and operation requirements. The dimensions in this sheet may change with amendments to the standards.
Closet bowl: 270 Easy Height Round Front Plus 1.6/0.8 gpf (6/3 l) full fl ush washdown closet bowl with open fl ushing rim.
Outlet: Floor mounted suitable for connection to waste outlet with offset plastic outlet connector for 10" (255mm) to 12" (305mm) rough-in.
Tank: Sydney Low Profi le Tank – has a free fi tting lid and is suitable for domestic and light commercial applications. Vandal Resistant Conversion Kit – A simple to install conversion is available for the standard mechanism to lock lid onto the tank, recommended for use in heavy duty commercial areas. Code No. 750110. The dual fl ush operating buttons comply with the requirements of Easy Height Standards for Accessible Design.
Weight: 86 lbs (39 kg).Water Control Valve:
Standard Bottom Entry Tank – available as left hand inlet and incorporates a super quiet water control assembly. Internal overfl ow only.
Fixing: The tank is fi xed directly to the closet bowl with a robust base fi xing system without the need for wall fi xing.
Seats: The following Caroma seats are recommended: Detachable Code No. 301032, Easy Closing Code No. 326222, and Standard Code No. 326707.
Color: White.Dimensions: All dimensions are in inches and millimetres and are subject to normal manufacturing
variations. Caroma pursues a policy of continuing improvement in design and performance of its products. The right is therefore reserved to vary specifi cations without notice.
73/4" (195mm)Inlet or overflow
183/4" (475mm)
17"
(430
mm
)
Inlet 21/4" (55mm)
(3/8
") 9m
m N
.P.S
sup
ply
10"
(255
mm
)
5 1/2" (140mm)
18" (455mm min.)
29"
(740
mm
) app
rox.
161 /
2" (4
20m
m) a
ppro
x.
141/4" (360mm)
Offset outlet Connector
18"
(455
mm
)
2" (50m
m)
11" (280mm)
67/8
"(1
75m
m)
163 /
4" (4
25m
m)
Bot
tom
inle
t
10" (255mm)12" (305mm)
28 3
/4"
(730
mm
)
Sydney Low ProfileCistern
11"
(280
mm
)
233 /
4" (6
05m
m)
25"
(635
mm
)
101/4" (260mm)
3/4" (20mm) approx.
Note: All height dimensions to underside of bowl. Make allowance for bedding.
Screw fi xing: The closet bowl should be bedded with an approved silicon caulking and fi xed with corrosion resistant screws and closet bowl guard washers. Use Caroma screw fi xing kit. Code No. 601150.
Sydney Low Profi le 270 Easy Height Code No.
Tank LH inlet 622330
Bowl 609177
Caroma Raised Push Button Option
�-�������� ������ ��� ��� & ������
�-�������� ������ ��� ��� & ������
CI/SfB(74.1) g3
DateOctober 2008
Supersedes all previous issues
2.8.3Sydney Low Profi le 270 Elongated 1.6/0.8 gpf (6/3 l) Water Saving Dual Flush High Effi ciency Toilet (HET)
Two Piece Ultra Low Flush (ULF) Vitreous China Washdown Toilet
Caroma International Pty Ltd. ABN 90 35 053 413 157
Sydney Low Profi le 270 Elongated 1.6/0.8 gpf (6/3 l) Dual Flush HET
Two Piece Ultra Low Flush (ULF) Vitreous China Washdown Toilet
A modern concept close coupled 1.6/0.8 gpf (6/3 l) Sydney Low Profi le 270 Elongated dual fl ush high effi ciency toilet (HET) featuring unique two button activation providing substantial water saving compared to standard toilets. Adjustable rough-in and smooth rounded contours for easy cleaning. The closet bowl has been designed with rough-in of 10" (255mm) to 12" (305mm) provided by plastic offset outlet connector option. This tank is a low profi le design for greater installation versatility which incorporates a high performance outlet valve that has been specially developed with the 270 elongated bowl to ensure optimum reliable fl ushing performance. Due to the substantial water saving benefi ts achieved by the 1.6/0.8 gpf (6/3 l) dual fl ush system, the toilet is suitable for multi-purpose applications where water conservation is important. Closet Bowl: 270 Elongated 1.6/0.8 gpf (6/3 l) full fl ush washdown closet bowl with open fl ushing
rim.Outlet: Floor mounted suitable for connection to waste outlet with offset plastic outlet connector
for 10" (255mm) to 12" (305mm) rough-in.Tank: Sydney Low Profi le Tank – has a free fi tting lid and is suitable for domestic and
light commercial applications. Vandal Resistant Conversion Kit – A simple to install conversion is available for the standard mechanism to lock lid onto the tank, recommended for use in heavy duty commercial areas. Code No. 750110.
Weight: 80 lbs (36 kg).Water Control Valve:
Standard Bottom Entry Tank – available as left hand inlet and incorporates a super quiet water control assembly. Internal overfl ow only.
Fixing: The tank is fi xed directly to the closet bowl with a robust base fi xing system without the need for wall fi xing.
Seats: The following Caroma seats are recommended: Elongated Code No. 326307, Elongated Soft Close Code No. 326221, and Commercial Code No. 326813.
Color: White.Dimensions: All dimensions are in inches and millimetres and are subject to normal manufacturing vari-
ations. Caroma pursues a policy of continuing improvement in design and performance of its products. The right is therefore reserved to vary specifi cations without notice.
Offset outlet Connector
51/2" (140mm)
14" (355mm)
311 /
4" (7
95m
m) a
ppro
x.
181 /
2" (4
70m
m) a
ppro
x.
15"
(380
mm
)
141 /
2 "
(370
mm
)B
otto
m in
let
2"
(50m
m)
(3/8
") 9m
m N
.P.S
sup
ply
10"
(255
mm
) 11" (280mm)
73/4" (195mm) Inlet or overflow
183/4" (475mm)
Inlet 21/4" (55mm)
67/8
"(1
75m
m)
233 /
4" (6
05m
m)
253 /
4" (6
55m
m)
103/4" (275mm)
263 /
4" (6
80m
m)
Sydney Low Profile Cistern
11"
(280
mm
)
10" (255mm)
12" (305mm)
3/4" (20mm) approx.
Note: All height dimensions to underside of closet bowl. Make allowance for bedding.
Screw fi xing: The closet bowl should be bedded with an approved silicon caulking and fi xed with corrosion resistant screws and closet bowl guard washers. Use Caroma screw fi xing kit. Code No. 601150.
Sydney Low Profi le 270 Elongated: Code No.
Tank LH inlet 622330
Bowl 609100
�-�������� ������ ��� ��� & ������
�-�������� ������ ��� ��� & ������
CI/SfB(74.1) g3
DateOctober 2008
Supersedes all previous issues
2.8.4Sydney Low Profi le 270Easy Height Elongated 1.6/0.8 gpf (6/3 l) Water Saving Dual Flush High Effi ciency Toilet (HET)
Two Piece Ultra Low Flush (ULF) Vitreous China Washdown Toilet
Caroma International Pty Ltd. ABN 90 35 053 413 157
Sydney Low Profi le 270 Easy Height Elongated 1.6/0.8 gpf (6/3 l) Dual Flush HET
Two Piece Ultra Low Flush (ULF) Vitreous China Washdown Toilet
A modern concept close coupled 1.6/0.8 gpf (6/3 l) Sydney Low Profi le 270 Easy Height Elongated dual fl ush high effi ciency toilet (HET) designed to provide a seat height of between 17" to 19" (430 to 485mm) measured to the top of the toilet seat. This tank is a low profi le design for greater installation versatility which incorporates a high performance outlet valve that has been specially developed with the 270 Easy Height elongated bowl to ensure optimum reliable fl ushing performance. Important: The Sydney Low Profi le 270 Easy Height Elongated dual fl ush washdown toilet will comply with the Americans with Disabilities Act when installed to Easy Height Standards for Accessible Design, Section 4.16 Water Closets. Further reference must be made to the relevant sections of Easy Height Standards For Accessible Design with current amendments to determine clear fl oor space, grab bar and operation requirements.
Closet bowl: 270 Easy Height Elongated 1.6/0.8 gpf (6/3 l) full fl ush washdown closet bowl with open fl ushing rim.
Outlet: Floor mounted suitable for connection to waste outlet with offset plastic outlet connector for 10" (255mm) to 12" (305mm) rough-in.
Tank: Sydney Low Profi le Tank – has a free fi tting lid and is suitable for domestic and light commercial applications. Vandal Resistant Conversion Kit – A simple to install conversion is available for the standard mechanism to lock lid onto the tank, recommended for use in heavy duty commercial areas Code No. 750110.
Weight: 86 lbs (39 kg).Water Control Valve:
Standard Bottom Entry Tank – available as left hand inlet and incorporates a super quiet water control assembly. Internal overfl ow only.
Fixing: The tank is fi xed directly to the closet bowl with a robust base fi xing system without the need for wall fi xing.
Seats: The following Caroma seats are recommended: Elongated Code No. 326307, Elongated Soft Close Code No. 326221, and Commercial Code No. 326813.
Color: White.Dimensions: All dimensions are in inches and millimetres and are subject to normal manufacturing
variations. Caroma pursues a policy of continuing improvement in design and performance of its products. The right is therefore reserved to vary specifi cations without notice.
Inlet 21/4" (55mm)
Offset outlet Connector
18" (455mm) min.
18"
(455
mm
)
28 3
/4"
(730
mm
)
163
/4"
(425
mm
)B
otto
m in
let
2" (50m
m)
3/4" (20mm) approx.
(3/8
" ) 9m
m N
.P.S
sup
ply
10"
(255
mm
) 11" (280mm)
73/4" (195mm)Inlet or overflow
Sydney Low Profile Cistern
11"
(280
mm
)
10" (255mm)12" (305mm)
51/2" (140mm)
311 /
4" (7
95m
m) a
ppro
x.
181 /
2" (4
70m
m) a
ppro
x.
183/4" (475mm)
14" (355mm)
233 /
4" (6
05m
m)
253 /
4" (6
55m
m)
113/8" (290mm)
17"
(430
mm
) Note: All height dimensions to underside of closet bowl. Make allowance for bedding.
Screw fi xing: The closet bowl should be bedded with an approved silicon caulking and fi xed with corrosion resistant screws and closet bowl guard washers. Use Caroma screw fi xing kit. Code No. 601150.
Sydney Low Profi le 270Easy Height Elongated Code No.
Tank LH inlet 622330
Bowl 609120
Caroma Raised Push Button Option
�-�������� ������ ��� ��� & ������
�-�������� ������ ��� ��� & ������
CI/SfB(74.1) g3
DateOctober 2008
Supersedes all previous issues
2.8.5Sydney Low Profi le 305 Round Front Plus 1.6/0.8 gpf (6/3 l) Water Saving Dual Flush High Effi ciency Toilet (HET)
Two Piece Ultra Low Flush (ULF) Vitreous China Washdown Toilet
Caroma International Pty Ltd. ABN 90 35 053 413 157
Sydney Low Profi le 305 Round Front Plus1.6/0.8 gpf (6/3 l) Dual Flush HET
Two Piece Ultra Low Flush (ULF) Vitreous China Washdown Toilet
A modern concept close coupled washdown 1.6/0.8 gpf (6/3 l) Sydney Low Profi le 305 dual fl ush high effi ciency toilet (HET) featuring unique two button activation providing substantial water saving compared to other HET or standard toilets and smooth rounded contours for easy cleaning. The closet bowl has been designed with a 12" (305mm) outlet rough-in. This tank is a low profi le design for greater installation versatility which incorporates a high performance outlet valve that has been specially developed with the 305 Round Front Plus bowl to ensure optimum reliable fl ushing performance. Due to the substantial water saving benefi ts achieved by the 1.6/0.8 gpf (6/3 l) dual fl ush system, the toilet is suitable for multi-purpose applications where water conservation is important.
Closet bowl: 305 Round Front Plus 1.6/0.8 gpf (6/3 l) full fl ush washdown closet bowl with open fl ushing rim.
Outlet: Floor mounted 305 outlet connection.
Tank: Sydney Low Profi le Tank – has a free fi tting lid and is suitable for domestic and light commercial applications. Vandal Resistant Conversion Kit – A simple to install conversion is available for the standard mechanism to lock lid onto the tank, recommended for use in heavy duty commercial areas. Code No. 750110.
Weight: 79 lbs (36 kg).
Water Control Valve:
Standard Bottom Entry Tank – available as left hand inlet and incorporates a super quiet water control assembly. Internal overfl ow only.
Fixing: The tank is fi xed directly to the closet bowl with a robust base fi xing system without the need for wall fi xing.
Seats: The following Caroma seats are recommended: Detachable Code No. 301032, Easy Closing Code No. 326222, and Standard Code No. 326707.
Color: White.
Dimensions: All dimensions are in inches and millimetres and are subject to normal manufacturing variations. Caroma pursues a policy of continuing improvement in design and performance of its products. The right is therefore reserved to vary specifi cations without notice.
73/4" (195mm)Inlet or overflow
11"
(280
mm
)
15"
(380
mm
)
261 /
2" (6
85m
m) a
ppro
x.27
3 /4"
(705
mm
) app
rox.
18 3/4" (475mm)
141/4" (360mm)approx.
12" (305mm)Center Line of Outlet6"(152mm)
161 /
2" (4
20m
m) a
ppro
x.67
/8"
(175
mm
)
Bolt Fixing Centre
Sydney Low ProfileCistern
1" (25mm) approx.
Inlet 21/4" (55mm)
51/2" (140mm)
141 /
2" (3
70m
m)
Bot
tom
Inle
t
227 /
8" (5
80m
m)
243 /
4" (6
30m
m)
95/8" (245mm)
Sydney Low Profi le 305 Code No.
Tank LH inlet 622330
Bowl 609151A
�-�������� ������ ��� ��� & ������
Note: All height dimensions to underside of closet bowl. Make allowance for bedding.
Closet bowl fi xing: The closet bowl should be bedded with an approved silicon caulking.
�-�������� ������ ��� ��� & ������
CI/SfB(74.1) g3
DateOctober 2008
Supersedes all previous issues
2.8.6Sydney Low Profi le 305 Elongated 1.6/0.8 gpf (6/3 l) Water Saving Dual Flush High Effi ciency Toilet (HET)
Two Piece Ultra Low Flush (ULF) Vitreous China Washdown Toilet
Caroma International Pty Ltd. ABN 90 35 053 413 157
Sydney Low Profi le 305 Elongated 1.6/0.8 gpf (6/3 l) Dual Flush HET
Two Piece Ultra Low Flush (ULF) Vitreous China Washdown Toilet
A modern concept close coupled washdown 1.6/0.8 gpf (6/3 l) Sydney Low Profi le 305 Elongated dual fl ush high effi ciency toilet (HET) featuring unique two button activation providing substantial water saving compared to other HET or standard toilets and smooth rounded contours for easy cleaning. The closet bowl has been designed with a 12" (305 mm) outlet rough-in. This tank is a low profi le design for greater installation versatility which incorporates a high performance outlet valve that has been specially developed with the 305 elongated bowl to ensure optimum reliable fl ushing performance. Due to the substantial water saving benefi ts achieved by the 1.6/0.8 gpf (6/3 l) dual fl ush system, the toilet is suitable for multi-purpose applications where water conservation is important. Closet bowl: 305 Elongated 1.6/0.8 gpf (6/3 l) full fl ush washdown closet bowl with open fl ushing
rim.Outlet: Floor mounted 305 elongated outlet connection.Tank: Sydney Low Profi le Tank – has a free fi tting lid and is suitable for domestic and
light commercial applications. Vandal Resistant Conversion Kit – A simple to install conversion is available for the standard mechanism to lock lid onto the tank, recommended for use in heavy duty commercial areas. Code No. 750110.
Weight: 80 lbs (36 kg).Water Control Valve:
Standard Bottom Entry Tank – available as left hand inlet and incorporates a super quiet water control assembly. Internal overfl ow only.
Fixing: The tank is fi xed directly to the closet bowl with a robust base fi xing system without the need for wall fi xing.
Seats: The following Caroma seats are recommended: Elongated Code No. 326307, Elongated Soft Close Code No. 326221, and Commercial Code No. 326813.
Color: White.Dimensions: All dimensions are in inches and millimetres and are subject to normal manufacturing vari-
ations. Caroma pursues a policy of continuing improvement in design and performance of its products. The right is therefore reserved to vary specifi cations without notice.
73/4" (195mm)Inlet or overflow
15"
(380
mm
)
301 /
8" (7
65m
m) a
ppro
x.
14" (355mm)
12" (305mm)Center Line of Outlet6"(152mm)
181 /
2" (4
70m
m) a
ppro
x.
Bolt Fixing Centre
Inlet 21/4" (55mm)
51/2 "(140mm)
141 /
2" (3
70m
m)
Bot
tom
inle
t
227 /
8" (5
80m
m)
24"
(610
mm
)
95/8" (245mm)
11"
(280
mm
)
261 /
2" (6
75m
m) a
ppro
x.
18 3/4" (475mm)
67/8
"(1
75m
m)
Sydney Low Profile Cistern
1" (25mm) approx.
Note: All height dimensions to underside of closet bowl. Make allowance for bedding.
Closet bowl fi xing: The closet bowl should be bedded with an approved silicon caulking.
Sydney Low Profi le 305 Elongated Code No.
Tank LH inlet 622330
Bowl 609130
�-�������� ������ ��� ��� & ������
�-�������� ������ ��� ��� & ������
CI/SfB(74.1) g3
DateOctober 2008
Supersedes all previous issues
2.8.7Sydney Smart 270 Round Front Plus 1.28/0.8 gpf (4.8/3 l) Water Saving Dual Flush High Effi ciency Toilet (HET)
Two Piece Ultra Low Flush (ULF) Vitreous China Washdown Toilet
Caroma International Pty Ltd. ABN 90 35 053 413 157
Sydney Smart 270 Round Front Plus1.28/0.8 gpf (4.8/3 l) Dual Flush High Effi ciency Toilet (HET)
Two Piece Ultra Low Flush (ULF) Vitreous China Washdown Toilet
A modern concept close coupled 1.28/0.8 gpf (4.8/3 l) Sydney Smart 270 dual fl ush high effi ciency toilet (HET) featuring unique two button activation providing substantial water saving compared to other HET or standard toilets. Adjustable rough-in and smooth rounded contours for easy cleaning. The closet bowl has been designed with rough-in of 10" (255mm) to 12" (305mm) provided by plastic offset outlet connector option. The tank incorporates the high performance outlet valve which has been specially developed with the 270 Round Front Plus bowl to ensure optimum reliable fl ushing performance. Due to the substantial water saving benefi ts achieved by the 1.28/0.8 gpf (4.8/3 l) dual fl ush system, the toilet is suitable for multi-purpose applications where water conservation is important.
Closet Bowl: 270 Round Front Plus 1.28/0.8 gpf (4.8/3 l) full fl ush washdown closet bowl with open fl ushing rim.
Outlet: Floor mounted suitable for connection to waste outlet with offset plastic outlet connector for 10" (255mm) to 12" (305mm) rough-in.
Tank: Sydney Smart Tank – has a free fi tting lid and is suitable for domestic and light commercial applications. Vandal Resistant Conversion Kit – A simple to install conversion is available for the standard mechanism to lock lid onto the tank, recommended for use in heavy duty commercial areas Code No. 750109.
Weight: 90 lbs (41 kg).Water Control Valve:
Standard Bottom Entry Tank – available as left hand inlet and incorporates a super quiet water control assembly. Internal overfl ow only.
Fixing: The tank is fi xed directly to the closet bowl with a robust base fi xing system without the need for wall fi xing.
Seats: The following Caroma seats are recommended: Detachable Code No. 301032, Easy Closing Code No. 326222, and Standard Code No. 326707.
Colors: White and biscuit.Dimensions: All dimensions are in inches and millimetres and are subject to normal manufacturing vari-
ations. Caroma pursues a policy of continuing improvement in design and performance of its products. The right is therefore reserved to vary specifi cations without notice.
Offset outlet Connector
183/4" (475mm)
51/2" (140mm)
141/4" (360mm)
29"
(740
mm
) app
rox.
161 /
2" (4
20m
m) a
ppro
x.
15"
(380
mm
)
2" (50m
m)
(3/8
") 9m
m N
.P.S
sup
ply
10"
(255
mm
) 11" (280mm)
73/4" (195mm)Inlet or overflow
Inlet 21/4" (55mm)
16"
(405
mm
)
67/8
"(1
75m
m)
317 /
8" (8
10m
m) a
ppro
x.
141 /
2 "
(370
mm
)B
otto
m in
let
233 /
4" (6
05m
m)
25"
(635
mm
)
103/4" (275mm)
10" (255mm)12" (305mm)
3/4" (20mm) approx.
Note: All height dimensions to underside of bowl. Make allowance for bedding.
Screw fi xing: The closet bowl should be bedded with an approved silicon caulking and fi xed with corrosion resistant screws and closet bowl guard washers. Use Caroma screw fi xing kit. Code No. 601150.
Sydney Smart 270: Code No.
Tank LH inlet 622322
Bowl 609159
�-�������� ������ ��� ��� & ������
�-�������� ������ ��� ��� & ������
CI/SfB(74.1) g3
DateOctober 2008
Supersedes all previous issues
2.8.8Sydney Smart 270 Easy Height Round Front Plus 1.28/0.8 gpf (4.8/3 l) Water Saving Dual Flush High Effi ciency Toilet (HET)
Two Piece Ultra Low Flush (ULF) Vitreous China Washdown Toilet
Caroma International Pty Ltd. ABN 90 35 053 413 157
Sydney Smart 270 Easy Height Round Front Plus 1.28/0.8 gpf (4.8/3 l) Dual Flush HET
Two Piece Ultra Low Flush (ULF) Vitreous China Washdown Toilet
A modern concept close coupled 1.28/0.8 gpf (4.8/3 l) Sydney Smart 270 Easy Height dual fl ush high effi ciency toilet (HET) designed to provide a seat height of between 17" to 19" (430 to 485mm) measured to the top of the toilet seat for disabled persons. The versatility of the Sydney Smart 270 Easy Height washdown toilet makes it ideal for use by both the ambulant persons with disabilities and wheelchair users. Important: The Sydney Smart 270 Easy Height dual fl ush washdown toilet will comply with the Americans with Disabilities Act when installed to Easy Height Standards for Accessible Design, Section 4.16 Water Closets. Further reference must be made to the relevant sections of Easy Height Standards For Accessible Design with current amendments to determine clear fl oor space, grab bar, and operation requirements. The dimensions in this sheet may change with amendments to the standards.Closet bowl: 270 Easy Height Round Front Plus 1.28/0.8 gpf (4.8/3 l) full fl ush washdown closet
bowl with open fl ushing rim.
Outlet: Floor mounted suitable for connection to waste outlet with offset plastic outlet connector for 10" (255mm) to 12" (305mm) rough-in.
Tank: Sydney Smart Tank – has a free fi tting lid and is suitable for domestic and light commercial applications. Vandal Resistant Conversion Kit – A simple to install conversion is available for the standard mechanism to lock lid onto the tank, recommended for use in heavy duty commercial areas. Code No. 750109. The dual fl ush operating buttons comply with the requirements of Easy Height Standards for Accessible Design.
Weight: 100 lbs (45 kg).Water Control Valve:
Standard Bottom Entry Tank – available as left hand inlet and incorporates a super quiet water control assembly. Internal overfl ow only.
Fixing: The tank is fi xed directly to the closet bowl with a robust base fi xing system without the need for wall fi xing.
Seats: The following Caroma seats are recommended: Detachable Code No. 301032, Easy Closing Code No. 326222, and Standard Code No. 326707.
Colors: White and biscuit.Dimensions: All dimensions are in inches and millimetres and are subject to normal manufacturing
variations. Caroma pursues a policy of continuing improvement in design and performance of its products. The right is therefore reserved to vary specifi cations without notice.
73/4" (195mm)Inlet or overflow
183/4" (475mm)
337 /
8" (8
60m
m) a
ppro
x.
17"
(430
mm
)
Inlet 21/4" (55mm)
3/4" (20mm) approx.
(3/8
") 9m
m N
.P.S
sup
ply
10"
(255
mm
)
16"
(405
mm
)
5 1/2" (140mm)
18" (455mm min.)
29"
(740
mm
) app
rox.
161 /
2" (4
20m
m) a
ppro
x.
141/4" (360mm)
Offset outlet Connector
18"
(455
mm
)
2" (50m
m)
11" (280mm)
67/8
"(1
75m
m)
163 /
4" (4
25m
m)
Bot
tom
inle
t
10" (255mm)12" (305mm)
233 /
4" (6
05m
m)
25"
(635
mm
)
101/4" (260mm)
Note: All height dimensions to underside of bowl. Make allowance for bedding.
Screw fi xing: The closet bowl should be bedded with an approved silicon caulking and fi xed with corrosion resistant screws and closet bowl guard washers. Use Caroma screw fi xing kit. Code No. 601150.
Sydney Smart 270 Easy Height Code No.
Tank LH inlet 622322
Bowl 609177
Caroma Raised Push Button Option
�-�������� ������ ��� ��� & ������
�-�������� ������ ��� ��� & ������
CI/SfB(74.1) g3
DateOctober 2008
Supersedes all previous issues
2.8.9Sydney Smart 270 Elongated 1.28/0.8 gpf (4.8/3 l) Water Saving Dual Flush High Effi ciency Toilet (HET)
Two Piece Ultra Low Flush (ULF) Vitreous China Washdown Toilet
Caroma International Pty Ltd. ABN 90 35 053 413 157
Sydney Smart 270 Elongated 1.28/0.8 gpf (4.8/3 l) Dual Flush HET
Two Piece Ultra Low Flush (ULF) Vitreous China Washdown Toilet
A modern concept close coupled 1.28/0.8 gpf (4.8/3 l) Sydney Smart 270 Elongated dual fl ush high effi ciency toilet (HET) featuring unique two button activation providing substantial water saving compared to other HET or standard toilets. Adjustable rough-in and smooth rounded contours for easy cleaning. The closet bowl has been designed with rough-in of 10" (255mm) to 12" (305mm) provided by plastic offset outlet connector option. The tank incorporates the high performance outlet valve which has been specially developed with the 270 elongated bowl to ensure optimum reliable fl ushing performance. Due to the substantial water saving benefi ts achieved by the 1.28/0.8 gpf (4.8/3 l) dual fl ush system, the toilet is suitable for multi-purpose applications where water conservation is important. Closet Bowl: 270 Elongated 1.28/0.8 gpf (4.8/3 l) full fl ush washdown closet bowl with open
fl ushing rim.Outlet: Floor mounted suitable for connection to waste outlet with offset plastic outlet connector
for 10" (255mm) to 12" (305mm) rough-in.Tank: Sydney Smart Tank – has a free fi tting lid and is suitable for domestic and light
commercial applications. Vandal Resistant Conversion Kit – A simple to install conversion is available for the standard mechanism to lock lid onto the tank, recommended for use in heavy duty commercial areas. Code No. 750109.
Weight: 94 lbs (43 kg).Water Control Valve:
Standard Bottom Entry Tank – available as left hand inlet and incorporates a super quiet water control assembly. Internal overfl ow only.
Fixing: The tank is fi xed directly to the closet bowl with a robust base fi xing system without the need for wall fi xing.
Seats: The following Caroma seats are recommended: Elongated Code No. 326307, Elongated Soft Close Code No. 326221, and Commercial Code No. 326813.
Colors: White and biscuit.Dimensions: All dimensions are in inches and millimetres and are subject to normal manufacturing vari-
ations. Caroma pursues a policy of continuing improvement in design and performance of its products. The right is therefore reserved to vary specifi cations without notice.
Offset outlet Connector
51/2" (140mm)
14" (355mm)
311 /
4" (7
95m
m) a
ppro
x.
317 /
8" (8
10m
m) a
ppro
x.
181 /
2" (4
70m
m) a
ppro
x.
15"
(380
mm
)
141 /
2 "
(370
mm
)B
otto
m in
let
2"
(50m
m)
3/4" (20mm) approx.
(3/8
") 9m
m N
.P.S
sup
ply
10"
(255
mm
) 11" (280mm)
73/4" (195mm)Inlet or overflow
183/4" (475mm)
Inlet 21/4" (55mm)
16"
(405
mm
)
67/8
"(1
75m
m)
233 /
4" (6
05m
m)
253 /
4" (6
55m
m)
103/4" (275mm)
10" (255mm)12" (305mm)
Note: All height dimensions to underside of closet bowl. Make allowance for bedding.
Screw fi xing: The closet bowl should be bedded with an approved silicon caulking and fi xed with corrosion resistant screws and closet bowl guard washers. Use Caroma screw fi xing kit. Code No. 601150.
Sydney Smart 270 Elongated:
Code No.
Tank LH inlet 622322
Bowl 609100
�-�������� ������ ��� ��� & ������
�-�������� ������ ��� ��� & ������
CI/SfB(74.1) g3
DateOctober 2008
Supersedes all previous issues
2.8.10Sydney Smart 270 Easy Height Elongated 1.28/0.8 gpf (4.8/3 l) Water Saving Dual Flush High Effi ciency Toilet (HET)
Two Piece Ultra Low Flush (ULF) Vitreous China Washdown Toilet
Caroma International Pty Ltd. ABN 90 35 053 413 157
Sydney Smart 270 Easy Height Elongated 1.28/0.8 gpf (4.8/3 l) Dual Flush HET
Two Piece Ultra Low Flush (ULF) Vitreous China Washdown Toilet
A modern concept close coupled 1.28/0.8 gpf (4.8/3 l) Sydney Smart 270 Easy Height Elongated dual fl ush high effi ciency toilet (HET) designed to provide a seat height of between 17" to 19" (430 to 485mm) measured to the top of the toilet seat for disabled persons. The versatility of the Sydney Smart 270 Easy Height Elongated washdown toilet makes it ideal for use by both the ambulant persons with disabilities and wheel-chair users. Important: The Sydney Smart 270 Easy Height Elongated dual fl ush washdown toilet will comply with the Americans with Disabilities Act when installed to Easy Height Standards for Accessible Design, Section 4.16 Water Closets. Further reference must be made to the relevant sections of Easy Height Standards For Accessible Design with current amendments to determine clear fl oor space, grab bar, and operation requirements.
Closet bowl: 270 Easy Height Elongated 1.28/0.8 gpf (4.8/3 l) full fl ush washdown closet bowl with open fl ushing rim.
Outlet: Floor mounted suitable for connection to waste outlet with offset plastic outlet connector for 10" (255mm) to 12" (305mm) rough-in.
Tank: Sydney Smart Tank – has a free fi tting lid and is suitable for domestic and light commercial applications. Vandal Resistant Conversion Kit – A simple to install conversion is available for the standard mechanism to lock lid onto the tank, recommended for use in heavy duty commercial areas Code No. 750109.
Weight: 100 lbs (45 kg).Water Control Valve:
Standard Bottom Entry Tank – available as left hand inlet and incorporates a super quiet water control assembly. Internal overfl ow only.
Fixing: The tank is fi xed directly to the closet bowl with a robust base fi xing system without the need for wall fi xing.
Seats: The following Caroma seats are recommended: Elongated Code No. 326307, Elongated Soft Close Code No. 326221, and Commercial Code No. 326813.
Colors: White and biscuit.Dimensions: All dimensions are in inches and millimetres and are subject to normal manufacturing
variations. Caroma pursues a policy of continuing improvement in design and performance of its products. The right is therefore reserved to vary specifi cations without notice.
73/4" (195mm)Inlet or overflow
Offset outlet Connector
183/4" (475mm)
51/2" (140mm)
18" (455mm min.)
311 /
4" (7
95m
m) a
ppro
x.
337 /
8" (8
60m
m) a
ppro
x.
181 /
2" (4
70m
m) a
ppro
x.
17"
(430
mm
)
18"
(455
mm
)
Inlet 21/4" (55mm)
2" (50m
m)
(3/8
") 9m
m N
.P.S
sup
ply
10"
(255
mm
) 11" (280mm)
14" (355mm)
16"
(405
mm
)16
3 /4"
(425
mm
)B
otto
m in
let
67/8
"(1
75m
m)
10" (255mm)12" (305mm)
233 /
4" (6
05m
m)
253 /
4" (6
55m
m)
113/8" (290mm)
3/4" (20mm) approx.
Note: All height dimensions to underside of closet bowl. Make allowance for bedding.
Screw fi xing: The closet bowl should be bedded with an approved silicon caulking and fi xed with corrosion resistant screws and closet bowl guard washers. Use Caroma screw fi xing kit. Code No. 601150.
Sydney Smart 270 Easy Height Elongated Code No.
Tank LH inlet 622322
Bowl 609120
Caroma Raised Push Button Option
�-�������� ������ ��� ��� & ������
�-�������� ������ ��� ��� & ������
CI/SfB(74.1) g3
DateOctober 2008
Supersedes all previous issues
2.8.11Sydney Smart 305 Round Front Plus 1.28/0.8 gpf (4.8/3 l) Water Saving Dual Flush High Effi ciency Toilet (HET)
Two Piece Ultra Low Flush (ULF) Vitreous China Washdown Toilet
Caroma International Pty Ltd. ABN 90 35 053 413 157
Sydney Smart 305 Round Front Plus 1.28/0.8 gpf (4.8/3 l) Dual Flush HET
Two Piece Ultra Low Flush (ULF) Vitreous China Washdown Toilet
A modern concept close coupled washdown 1.28/0.8 gpf (4.8/3 l) Sydney Smart 305 dual fl ush high effi ciency toilet (HET) featuring unique two button activation providing substantial water saving compared to other HET or standard toilets and smooth rounded contours for easy cleaning. The closet bowl has been designed with a 12" (305mm) outlet rough-in. The tank incorporates a high performance outlet valve which has been specially developed with the 305 Round Front Plus bowl to ensure optimum fl ushing performance. Due to the substantial water saving benefi ts achieved by the 1.28/0.8 gpf (4.8/3 l) dual fl ush system, the toilet is suitable for multi-purpose applications where water conservation is important.
Closet bowl: 305 Round Front Plus 1.28/0.8 gpf (4.8/3 l) full fl ush washdown closet bowl with open fl ushing rim.
Outlet: Floor mounted 305 outlet connection.
Tank: Sydney Smart Tank – has a free fi tting lid and is suitable for domestic and light commercial applications. Vandal Resistant Conversion Kit – A simple to install conversion is available for the standard mechanism to lock lid onto the tank, recommended for use in heavy duty commercial areas. Code No. 750109.
Weight: 93 lbs (42 kg).
Water Control Valve:
Standard Bottom Entry Tank – available as left hand inlet and incorporates a super quiet water control assembly. Internal overfl ow only.
Fixing: The tank is fi xed directly to the closet bowl with a robust base fi xing system without the need for wall fi xing.
Seats: The following Caroma seats are recommended: Detachable Code No. 301032, Easy Closing Code No. 326222, and Standard Code No. 326707.
Colors: White and biscuit.
Dimensions: All dimensions are in inches and millimetres and are subject to normal manufacturing vari-ations. Caroma pursues a policy of continuing improvement in design and performance of its products. The right is therefore reserved to vary specifi cations without notice.
73/4" (195mm) Inlet or overflow
16"
(405
mm
)
15"
(380
mm
)
317 /
8" (8
10m
m) a
ppro
x.27
3 /4"
(705
mm
) app
rox.
18 3/4" (475mm)
141/4" (360mm)
12" (305mm) Center Line of Outlet 6" (152mm)
161 /
2" (4
20m
m) a
ppro
x.
67/8
" (1
75m
m)
Bolt Fixing Centre
Sydney Cistern
Inlet 21/4" (55mm)
1" (25mm) approx.
51/2" (140mm)
141 /
2" (3
70m
m)
Bot
tom
inle
t
227 /
8" (5
80m
m)
243 /
4" (6
30m
m)
95/8" (245mm)
Sydney Smart 305 Code No.
Tank LH inlet 622322
Bowl 609151A
�-�������� ������ ��� ��� & ������
Note: All height dimensions to underside of closet bowl. Make allowance for bedding.
Closet bowl fi xing: The closet bowl should be bedded with an approved silicon caulking.
�-�������� ������ ��� ��� & ������
CI/SfB(74.1) g3
DateOctober 2008
Supersedes all previous issues
2.8.12Sydney Smart 305 Elongated1.28/0.8 gpf (4.8/3 l) Water Saving Dual Flush High Effi ciency Toilet (HET)
Two Piece Ultra Low Flush (ULF) Vitreous China Washdown Toilet
Caroma International Pty Ltd. ABN 90 35 053 413 157
Sydney Smart 305 Elongated 1.28/0.8 gpf (4.8/3 l) Dual Flush HET
Two Piece Ultra Low Flush (ULF) Vitreous China Washdown Toilet
A modern concept close coupled washdown 1.28/0.8 gpf (4.8/3 l) Sydney Smart 305 Elongated dual fl ush high effi ciency toilet (HET) featuring unique two button activation providing substantial water saving compared to other HET or standard toilets and smooth rounded contours for easy cleaning. The closet bowl has been designed with a 12" (305 mm) outlet rough-in. The tank incorporates the high perform-ance outlet valve which has been specially developed with the 305 elongated bowl to ensure optimum fl ush-ing performance. Due to the substantial water saving benefi ts achieved by the 1.28/0.8 gpf (4.8/3 l) dual fl ush system, the toilet is suitable for multi-purpose applications where water conservation is important.
Closet bowl: 305 Elongated 1.28/0.8 gpf (4.8/3 l) full fl ush washdown closet bowl with open fl ushing rim.
Outlet: Floor mounted 305 elongated outlet connection.Tank: Sydney Smart Tank – has a free fi tting lid and is suitable for domestic and light
commercial applications. Vandal Resistant Conversion Kit – A simple to install conversion is available for the standard mechanism to lock lid onto the tank, recommended for use in heavy duty commercial areas. Code No. 750109.
Weight: 94 lbs (43 kg).Water Control Valve:
Standard Bottom Entry Tank – available as left hand inlet and incorporates a super quiet water control assembly. Internal overfl ow only.
Fixing: The tank is fi xed directly to the closet bowl with a robust base fi xing system without the need for wall fi xing.
Seats: The following Caroma seats are recommended: Elongated Code No. 326307, Elongated Soft Close Code No. 326221, and Commercial Code No. 326813.
Colors: White and biscuit.Dimensions: All dimensions are in inches and millimetres and are subject to normal manufacturing vari-
ations. Caroma pursues a policy of continuing improvement in design and performance of its products. The right is therefore reserved to vary specifi cations without notice.
73/4" (195mm)Inlet or overflow
16"
(405
mm
)
15"
(380
mm
)
317 /
8" (8
10m
m) a
ppro
x.
301 /
8" (7
65m
m) a
ppro
x.
183/4" (475mm)
14" (355mm)
12" (305mm)Center Line of Outlet6"(152mm)
181 /
2" (4
70m
m) a
ppro
x.
Bolt Fixing Centre
1/4" (5mm) approx.
Inlet 21/4" (55mm)
51/2 "(140mm)
Sydney Cistern
67/8
"(1
75m
m)
141 /
2" (3
70m
m)
Bot
tom
inle
t
227 /
8" (5
80m
m)
24"
(610
mm
)
95/8" (245mm)
Note: All height dimensions to underside of closet bowl. Make allowance for bedding.
Closet bowl fi xing: The closet bowl should be bedded with an approved silicon caulking.
Sydney Smart 305 Elongated Code No.
Tank LH inlet 622322
Bowl 609130
�-�������� ������ ��� ��� & ������
�-�������� ������ ��� ��� & ������
CI/SfB(74.1) g3
DateJune 2009
Supersedes all previous issues
Sydney Smart Back Outlet Round Front Plus 1.28/0.8 gpf (4.8/3 l) Water Saving Dual Flush High Effi ciency Toilet (HET)
Two Piece Ultra Low Flush (ULF) Vitreous China Washdown Toilet
Caroma International Pty Ltd. ABN 90 35 053 413 157
Sydney Smart Back OutletRound Front Plus 1.28/0.8 gpf (4.8/3 l) Dual Flush HET
Two Piece Ultra Low Flush (ULF) Vitreous China Washdown Toilet
A modern concept close coupled washdown 1.28/0.8 gpf (4.8/3 l) Sydney Smart Back Outlet dual fl ush high effi ciency toilet (HET) featuring unique two button activation providing substantial water saving compared to other HET or standard toilets and smooth rounded contours for easy cleaning. The closet bowl has been designed with a 4" rear outlet rough-in. The tank incorporates a high performance outlet valve which has been specially developed with the Round Front Plus bowl to ensure optimum fl ushing performance. Due to the substantial water saving benefi ts achieved by the 1.28/0.8 gpf (4.8/3 l) dual fl ush system, the toilet is suitable for multi-purpose applications where water conservation is important.
Closet bowl: Back Outlet Round Front Plus 1.28/0.8 gpf (4.8/3 l) full fl ush washdown closet bowl with open fl ushing rim.
Outlet: Floor mounted rear outlet connection.
Tank: Sydney Smart Tank – has a free fi tting lid and is suitable for domestic and light commercial applications. Vandal Resistant Conversion Kit – A simple to install conversion is available for the standard mechanism to lock lid onto the tank, recommended for use in heavy duty commercial areas. Code No. 750109.
Weight: 86 lbs (39 kg).
Water Control Valve:
Standard Bottom Entry Tank – available as left hand inlet and incorporates a super quiet water control assembly. Internal overfl ow only.
Fixing: The tank is fi xed directly to the closet bowl with a robust base fi xing system without the need for wall fi xing.
Seats: The following Caroma seats are recommended: Detachable Code No. 301032 andEasy Closing Code No. 326222.
Colors: White.
Dimensions: All dimensions are in inches and millimetres and are subject to normal manufacturing vari-ations. Caroma pursues a policy of continuing improvement in design and performance of its products. The right is therefore reserved to vary specifi cations without notice.
1" (25mm) approx.
153 /
4" (4
00m
m)
235 /
8" (6
00m
m)
97/8" (250mm)
9" (230mm)Inlet or overflow
16"
(405
mm
)
151 /
2" (3
95m
m)
323 /
4" (8
33m
m) a
ppro
x.26
5 /8"
(670
mm
) app
rox.
18 3/4" (475mm)
14" (355mm)approx.
6"(150mm)
161 /
2" (4
20m
m) a
ppro
x.67
/8"
(175
mm
)
Bolt Fixing Centre
Sydney SmartCistern
Inlet 21/4" (55mm)
6"(155mm)
141 /
2" (3
70m
m)
Bot
tom
Inle
t
4" (1
02m
m)
71/4
"(1
85m
m)
Sydney Smart Back Outlet Code No.
Tank LH inlet 622322
Bowl 609450
�-�������� ������ ��� ��� & ������
Note: All height dimensions to underside of closet bowl. Make allowance for bedding.
Closet bowl fi xing: The closet bowl should be bedded with an approved silicon caulking.
�-�������� ������ ��� ��� & ������
CI/SfB(74.2) g3
DateOctober 2008
Supersedes all previous issues
2.9.1Walvit Round Front Plus Wall-Hung1.6/0.8 gpf (6/3 l) Water Saving Dual Flush High Effi ciency Toilet (HET)
Ultra Low Flush (ULF) Vitreous China Washdown Toilet
Caroma International Pty Ltd. ABN 90 35 053 413 157
Walvit Wall HungRound Front Plus1.6/0.8 gpf (6/3 l)Dual Flush HET
Ultra Low Flush (ULF) Vitreous China Washdown Toilet
A classically styled box rim wall hung closet bowl featuring smooth sculptured contours and advantages of unobstructed fl oor for easy cleaning. The closet bowl features concealed shrouded outlet and closet bowl fi xings providing optimum appearance to the wall. The Walvit closet bowl has been developed to be installed directly to the wall using the Sanifi x bracketing system. The closet bowl is suitable for domestic and com-mercial applications.
Closet Bowl: Walvit 1.6/0.8 gpf (6/3 l) full fl ush, wall hung, washdown type with box rim. Code No. 604118.
Outlet: Wall mounted outlet only, unvented.
Inlet: 2" (50mm) back inlet for concealed tank and fl ush valve installation.
Tanks: Caroma concealed tank options are available: Invisi Inwall/Induct/Inceiling Tanks. Code No. 227006.
Weight: 111 lbs (50 kg).
Fixing: Sanifi x bracket option available for fi xing the Walvit closet bowl directly to the wall:D.715 Tank Chair Bracket Code No. 687715, fi xing pack Code No. 687812.
Seats: The following Caroma seats are recommended: Detachable Code No. 301032, Easy Closing Code No. 326222, Standard Code No. 326707, and Wooden Code No. 326606.
Color: White.
Dimensions: All dimensions are in inches and millimetres and are subject to normal manufacturing variations. Caroma pursues a policy of continuing improvement in design and performance of its products. The right is therefore reserved to vary specifi cations without notice.
221 /
2 " (5
70m
m)
81/4
"(2
10m
m)
141/4" (355mm)
163 /
4" (4
25m
m)
16"
(405
mm
)
Finished floor
Walvit
57/8"(150mm)
61/4
" (1
55m
m)
13/ 8
" (4
0mm
)14
1 /2"
(365
mm
)
Nom
inal
77/8"(200mm)
Inlet
Outlet
Rough in Dimension
Bolt Hole Centres
81/4
"(2
10m
m) Wall contact
area for panmust be trueand flat
Stud secured behind the wallwith suitable Caroma bracket
Fixing assembly
Finished wallLength ofStud from
Finished Wall
Walvit Installation Detail
Seal with suitable acetic cured silicon caulking
21/4" (55mm) min.23/8" (60mm) max.
Gasket
Inlet Pipe
InletKeeSeal
Walvit Inlet Detail
FinishedWall
1" (25mm)Length of inlet
pipe fromfinished wall
�-�������� ������ ��� ��� & ������
Caroma International Pty Ltd. ABN 90 35 053 413 157
NoteThe minimum wall
thickness is dependenton the material and type
of joint used to makethe outlet connection.
16"
(405
mm
)
Finished floor
77/8" (200mm) Walvit pan fixing centre
Mounting bracket
13" (330mm)
127/8" (325mm)Cover panel
63/4
"(1
69m
m)
27"
(685
mm
)Fr
om c
entre
of i
nlet
to to
p of
the
mou
ntin
g br
acke
t
193/4" (570mm)
Structural slab
81/4
" (2
10m
m)
D715 Sanifix Cistern Chair BracketCode No. 687715
Outlet centrefrom finished floor
Cov
er
pane
l61
/4"
(155
mm
)
15/8" (40mm)
11/4" (32mm)
373 /
8" (9
55m
m) m
in.
405 /
8" (1
031m
m)
83/8"(207mm)
Compact stainless steelaccess panel and buttons
1/2" (12mm)BSP inlet connection
Stud secured behind the wall with suitable Caroma bracket
Fixing assembly
Caulk withsuitable siliconecompound
21/8" (55mm) min.
23/8" (60mm) max. Length of stud from finished wall
Finishedwall
Gasket
Ø 45/16" (110mm)
11/2" (40mm)
Structural Slab
Frame221/4" (566mm)
Invisi cistern
Walvit InvisiInwall Installation
22" (570mm)
Outlet centrefrom finished floor
81/4
"(2
10m
m)
16"
(405
mm
)
D715 Sanifix CisternChair BracketCode No.687715
Finished floor
81/8"(207mm)
Mountingbracket
Frame 221/4" (566mm)
13" (330mm)
27"
(685
mm
)Fr
om c
entre
of i
nlet
to to
p of
the
mou
ntin
g br
acke
t
Structural slabStructural Slab
77/8" (200mm) Walvit pan fixing centre
61/4
"(1
55m
m)
15/8" (40mm)
11/4" (32mm)
1/2" (12mm)BSP inlet connection
1/2" (12mm)BSP inlet connection
Invisi cistern
Remote buttons and stainless steel plate
Walvit InvisiInduct Installation
�-�������� ������ ��� ��� & ������
CI/SfB(74.1) g3
DateOctober 2008
Supersedes all previous issues
2.9.2Walvit Elongated1.6/0.8 gpf (6/3 l) Water Saving Dual Flush High Effi ciency Toilet (HET)
Ultra Low Flush (ULF) Vitreous China Washdown Toilet
Caroma International Pty Ltd. ABN 90 35 053 413 157
Walvit Wall HungElongated1.6/0.8 gpf (6/3 l)Dual Flush HET
Ultra Low Flush (ULF) Vitreous China Washdown Toilet
A classically styled box rim wall hung closet bowl featuring smooth sculptured contours and advantages of unobstructed fl oor for easy cleaning. The closet bowl features concealed shrouded outlet and closet bowl fi xings providing optimum appearance to the wall. The Walvit Elongated closet bowl has been developed to be installed directly to the wall using the Sanifi x bracketing system. The closet bowl is suitable for domestic and commercial applications.
Closet Bowl: Walvit Elongated 1.6 gal (6 l) full fl ush, wall hung, wash down type with box rim. Code No. 604119.
Outlet: Wall mounted outlet only, unvented.
Inlet: 2" (50mm) back inlet for concealed tank and fl ushvalve installation. Option top inlet S.M.O.
Tanks: Caroma Concealed Tank options are available: Invisi Inwall/Induct/Inceiling Tanks. Code No. 227006.
Weight: 116 lbs (53 kg).
Fixing: Sanifi x bracket option available for fi xing the Walvit Elongated closet bowl directly to the wall: D.715 Tank Chair Bracket Code No. 687715, fi xing pack Code No. 687812.
Seats: The following Caroma seats are recommended: Elongated Code No. 326307, Elongated Soft Close Code No. 326221, and Commercial Code No. 326813.
Color: White.
Dimensions: All dimensions are in inches and millimetres and are subject to normal manufacturing variations. Caroma pursues a policy of continuing improvement in design and performance of its products. The right is therefore reserved to vary specifi cations without notice.
243 /
8" (6
18m
m)
81/4
"(2
10m
m)
14" (360mm)
181 /
2" (4
70m
m)
16"
(405
mm
)
Finished floor
51/2" (140mm)
61/4
" (1
55m
m)
13/8
" (4
0mm
)14
1 /2"
(365
mm
)
Nom
inal
77/8" (200mm)
Inlet
Outlet
Rough in Dimension
Bolt Hole Centres
81/4
"(2
10m
m) Wall contact
area for panmust be trueand flat
Stud secured behind the wallwith suitable Caroma bracket
Fixing assembly
Finished wallLength ofStud from
Finished Wall
Walvit Installation Detail
Seal with suitable acetic cured silicon caulking
21/4" (55mm) min.23/8" (60mm) max.
Gasket
Inlet Pipe
InletKeeSeal
Walvit Inlet Detail
FinishedWall
1" (24mm)Length of inlet
pipe fromfinished wall
Walvit
�-�������� ������ ��� ��� & ������
Caroma International Pty Ltd. ABN 90 35 053 413 157
NoteThe minimum wallthickness is dependenton the material and typeof joint used to makethe outlet connection.
16"
(405
mm
)
Finished floor
243/8" (618mm)
Structural slab
81/4
" (2
10m
m)
D715 Sanifix Cistern Chair BracketCode No. 687715
Outlet centrefrom finished floor
Stud secured behind the wall with suitable Caroma bracket
Fixing assembly
Caulk withsuitable siliconecompound
21/8" (55mm) min.
23/8" (60mm) max. Length of stud from finished wall
Finishedwall
GasketØ 45/16" (110mm)
11/2" (40mm)
77/8" (200mm) Walvit pan fixing centre
Mounting bracket
13" (330mm)
127/8" (325mm)Cover panel
63/4
"(1
69m
m)
27"
(685
mm
)Fr
om c
entre
of i
nlet
to to
p of
the
mou
ntin
g br
acke
t
Cov
er
pane
l61
/4"
(155
mm
)
15/8" (40mm)
11/4" (32mm)
373 /
8" (9
55m
m) m
in.
405 /
8" (1
031m
m)
83/8"(207mm)
1/2" (12mm)BSP inletconnection
Structural Slab
Frame221/4" (566mm)
Compact stainless steelaccess panel and buttons
Invisi cistern
Walvit Elongated InvisiInwall Installation Compact Panel Kit
Caroma International Pty Ltd. ABN 90 35 053 413 157
NoteThe minimum wallthickness is dependenton the material and typeof joint used to makethe outlet connection.
Adj
usta
ble
16 –
17"
(405
– 4
30m
m)
Finished floor
77/8" (200mm) Walvit pan fixing centre
Mounting bracket
13" (330mm)
243/8" (618mm)
Structural slab
81/4
" (2
10m
m)
D715 Sanifix Cistern Chair BracketCode No. 687715
Invisi inwall cistern
Outlet centrefrom finished floor
61/4
"(1
55m
m)
15/8" (40mm)
11/4" (32mm)
Compact access S/splate with Dual flush
Mk3 push buttonsCode No.227124ST
Stud secured behind the wall with suitable Caroma bracket
Fixing assembly
Caulk withsuitable siliconecompound
21/8" (55mm) min.
23/8" (60mm) max. Length of stud from finished wall
Finishedwall
GasketØ 45/16" (110mm)
11/2" (40mm)
Structural Slab
453 /
8" (1
165m
m)
27"
(685
mm
)Fr
om c
entre
of i
nlet
to to
p of
the
mou
ntin
g br
acke
t
83/8"(207mm)
1/2" (12mm)BSP inlet connection
Walvit Elongated InvisiInwall Installation Large Panel Kit
Section 03
Spare Parts
Caroma International Pty Ltd. ABN 90 35 053 413 157
Spare Parts –Adelaide Cube Tank 3.1
Code Part description
415026C Chrome button kit
416020W Raised button and bezel kit
687040 Quietfl ow 2 bottom inlet repair kit
687144 Quietfl ow 2 inlet valve
687214 Cistern to pan foam seal
687240 Cistern to pan fi xing kit
687256 Plug/washer/nut pack
687662 Adelaide Cube lid
M5 outlet valve
687205 Cistern tail seal - 2000 Series
750017 M5 outlet valve seal
750109 Vandal resistant kit (optional)
750293 M5 outlet valve
Hi-Flow outlet valve
415056 Hi-Flow outlet valve
415297 Hi-Flow outlet valve spare parts kit
687205 Cistern tail seal - 2000 Series
800106 Vandal resistant kit (optional)
415297
415056
687205
WL
CL
687144
687040
750293
750017
Adelaide Cube tank
2 of2 of2 of2 of2 of
687240687214687256
415026C
687662
Caroma International Pty Ltd. ABN 90 35 053 413 157
Spare Parts –Adelaide Standard Tank 3.2
Code Part description
415026C Chrome button kit
416020W Raised button and bezel kit
687040 Quietfl ow 2 bottom inlet repair kit
687144 Quietfl ow 2 inlet valve
687214 Cistern to pan foam seal
687240 Cistern to pan fi xing kit
687256 Plug/washer/nut pack
687663 Adelaide Standard lid
M5 outlet valve
750017 M5 outlet valve seal
750109 Vandal resistant kit (optional)
750292 M5 outlet valve
Hi-Flow outlet valve
415056 Hi-Flow outlet valve
415297 Hi-Flow outlet valve spare parts kit
687205 Cistern tail seal - 2000 Series
800106 Vandal resistant kit (optional)
415297
415056
687205
WL
CL
687144
687040
750292
750017
Adelaide Standard tank
2 of2 of2 of2 of2 of
687240687214687256
415026C
687663W
Caroma International Pty Ltd. ABN 90 35 053 413 157
Spare Parts –Bondi Tank 3.3
415297
415056
687205
WL
CL
687144
687040
750285
750017
Bondi tank
2 of2 of2 of2 of2 of
687240687214
415026C
687256
687661
Code Part description
415026C Chrome button kit
416020W Raised button and bezel kit
687040 Quietfl ow 2 bottom inlet repair kit
687144 Quietfl ow 2 inlet valve
687214 Cistern to pan foam seal
687240 Cistern to pan fi xing kit
687256 Plug/washer/nut pack
687661 Bondi lid
M5 outlet valve
687205 Cistern tail seal - 2000 Series
750017 M5 outlet valve seal
750109 M5 vandal resistant kit (optional)
750285 M5 outlet valve
Hi-Flow outlet valve
415056 Hi-Flow outlet valve
415297 Hi-Flow outlet valve spare parts kit
687205 Cistern tail seal - 2000 Series
800106 Vandal resistant kit (optional)
Caroma International Pty Ltd. ABN 90 35 053 413 157
Spare Parts –Brisbane Tank 3.4
687205
WL
CL
687144
687040
750298
750017
Brisbane tank
687214
415026C
2 of2 of2 of2 of2 of
687240687256
687684
Code Part description
415026C Chrome button kit
416020W Raised button and bezel kit
687040 Quietfl ow 2 bottom inlet repair kit
687144 Quietfl ow 2 inlet valve
687214 Cistern to pan foam seal
687240 Cistern to pan fi xing kit
687256 Plug/washer/nut pack
687684 Brisbane lid
M5 outlet valve
687205 Cistern tail seal - 2000 Series
750017 M5 outlet valve seal
750109 M5 vandal resistant kit (optional)
750298 M5 outlet valve
Caroma International Pty Ltd. ABN 90 35 053 413 157
Spare Parts –Caravelle Two Piece Tank 3.5
415297
415043
687205
WL
CL
687144
687040
750289
750017
Caravelle two piece tank
2 of2 of2 of2 of2 of
687240687214
405167
687256
412122
687179
Code Part description
405067 Raised button and bezel kit
405167 Button and bezel kit
412122 Bezel clamp and screw
687040 Quietfl ow 2 bottom inlet repair kit
687144 Quietfl ow 2 inlet valve
687179 Caravelle lid
687214 Cistern to pan foam seal
687240 Cistern to pan fi xing kit
687256 Plug/washer/nut pack
M5 outlet valve
687205 Cistern tail seal - 2000 Series
750017 M5 outlet valve seal
750109 M5 vandal resistant kit (optional)
750289 M5 outlet valve
Hi-Flow outlet valve
415043 Hi-Flow outlet valve
415297 Hi-Flow outlet valve spare parts kit
687205 Cistern tail seal - 2000 Series
800106 Vandal resistant kit (optional)
Caroma International Pty Ltd. ABN 90 35 053 413 157
Spare Parts –Caravelle One Piece Tank 3.6
Caravelle One Piece and One Piece Easy Height - current tank model
WD05502C
687637
WD3121US
WD04900P
687256
687242
Code Part description
687242 Valve seal
687256 Plug/washer/nut pack
687637 Caravelle one piece lid
WD04900P Outlet value
WD05502C Button kit
WD3121US Inlet valve
Caroma International Pty Ltd. ABN 90 35 053 413 157
Spare Parts –Colonial Tank 3.7
415297
415043
687205
WL
CL
687144
687040
750299
750017
Colonial tank
2 of2 of2 of2 of2 of
687240687214
687266
687256
412122
687184
Code Part description
412122 Bezel clamp and screw
687040 Quietfl ow 2 bottom inlet repair kit
687144 Quietfl ow 2 inlet valve
687184 Colonial lid
687214 Cistern to pan foam seal
687240 Cistern to pan fi xing kit
687256 Plug/washer/nut pack
687266 Button and bezel kit
M5 outlet valve
687205 Cistern tail seal - 2000 Series
750017 M5 outlet valve seal
750109 M5 vandal resistant kit (optional)
750299 M5 outlet valve
Hi-Flow outlet valve
415043 Hi-Flow outlet valve
415297 Hi-Flow outlet valve spare parts kit
687205 Cistern tail seal - 2000 Series
800106 Vandal resistant kit (optional)
Caroma International Pty Ltd. ABN 90 35 053 413 157
Spare Parts –Royale Tank 3.8
415297
415042
687205
WL
CL
687144
687040
750290
750017
Royale tank
2 of2 of2 of2 of2 of
687240687214
405167
687256
687173
412122
Code Part description
405167 Button and bezel kit
412122 Bezel clamp and screw
687040 Quietfl ow 2 bottom inlet repair kit
687173 Royale lid
687144 Quietfl ow 2 inlet valve
687214 Cistern to pan foam seal
687240 Cistern to pan fi xing kit
687256 Plug/washer/nut pack
M5 outlet valve
687205 Cistern tail seal - 2000 Series
750017 M5 outlet valve seal
750109 M5 vandal resistant kit (optional)
750290 M5 outlet valve
Hi-Flow outlet valve
415042 Hi-Flow outlet valve
415297 Hi-Flow outlet valve spare parts kit
687205 Cistern tail seal - 2000 Series
800106 Vandal resistant kit (optional)
Caroma International Pty Ltd. ABN 90 35 053 413 157
Spare Parts –Sydney Tank 3.9
Code Part description
405067 Raised button and bezel kit
405167 Button and bezel kit
412122 Bezel clamp and screw
687040 Quietfl ow 2 bottom inlet repair kit
687144 Quietfl ow 2 inlet valve
687214 Cistern to pan foam seal
687240 Cistern to pan fi xing kit
687256 Plug/washer/nut pack
687660 Sydney lid
M5 outlet valve
687205 Cistern tail seal - 2000 Series
750017 M5 outlet valve seal
750109 M5 vandal resistant kit (optional)
750284 M5 outlet valve
Hi-Flow outlet valve
415047 Hi-Flow outlet valve
415297 Hi-Flow outlet valve spare parts kit
687205 Cistern tail seal - 2000 Series
800106 Vandal resistant kit (optional)
415297
415047
687205
WL
CL
687144
687040
750284
750017
2 of2 of2 of2 of2 of
687240687214
Sydney tank
405167
687256
687660
412122
Caroma International Pty Ltd. ABN 90 35 053 413 157
687205
WL
CL
687144
687040
2 of2 of2 of2 of2 of
687240687214
Sydney Low Profile tank
416278
687256
687660
412122
750017
750232
Spare Parts –Sydney Low Profi le Tank 3.10
Code Part description
405067 Raised button and bezel kit
412122 Bezel clamp and screw
416278 Button and bezel kit
687040 Quietfl ow 2 bottom inlet repair kit
687144 Quietfl ow 2 inlet valve
687214 Cistern to pan foam seal
687240 Cistern to pan fi xing kit
687256 Plug/washer/nut pack
687660 Sydney lid
M5 outlet valve
687205 Cistern tail seal - 2000 Series
750017 M5 outlet valve seal
750109 M5 vandal resistant kit (optional)
750232 M5 outlet valve
Caroma International Pty Ltd. ABN 90 35 053 413 157
Spare Parts –Sydney Smart Tank 3.11
Code Part description
405067 Raised button and bezel kit
412122 Bezel clamp and screw
416283 Button and bezel kit
687040 Quietfl ow 2 bottom inlet repair kit
687144 Quietfl ow 2 inlet valve
687214 Cistern to pan foam seal
687240 Cistern to pan fi xing kit
687256 Plug/washer/nut pack
687660 Sydney lid
M5 outlet valve
687205 Cistern tail seal - 2000 Series
750017 M5 outlet valve seal
750109 M5 vandal resistant kit (optional)
750297 M5 outlet valve
687205
WL
CL
687144
687040
750297
750017
2 of2 of2 of2 of2 of
687240687214
Sydney Smart tank
416283
687256
687660
412122
Section 04
Lavatory/SinksSemi-Recessed
CI/SfB(74.2) n6
DateOctober 2008
Supersedes all previous issues
4.1Brisbane Semi-RecessedVitreous China Lavatories/SinksNominal Size 153/4" (400mm) x 183/4" (475mm)
�-�������� ������ ��� ��� & ������
Caroma International Pty Ltd. ABN 90 35 053 413 157
BrisbaneSemi-Recessed
Vitreous China Lavatories/SinksLavatory Size: 153/4" (400mm) x 183/4" (475mm) (nominal)
A minimalist geometric designed semi-recessed vanity lavatory. The Brisbane Semi-Recessed has been designed to coordinate with other products in the Brisbane range. The lavatory is suitable for general purpose domestic and commercial applications. The lavatory is sealed to the countertop with an approved acetic cured silicon caulking.
Faucet Holes: The lavatory is available in one faucet hole Code No. 851518W and three faucet hole Code No. 851538.
Drain Outlet: Drain outlets use 11/4" (32mm) diameter drain outlet assemblies.
Bowl Capacity: 0.66 gal (2.5 l) to overfl ow.
Weight: 24 lbs (11 kg).
Overflow: Rear overflow.
Fixing: D.250 Bracket with Tie Hooks: Supplied. Recommended for domestic and general commercial use. Two D.250 brackets are fixed to the underside of the counter top to secure the tie hooks which anchor the back of the lavatory to the counter top. The lavatory must be sealed to the top and front surface of the counter with an approved acetic cured silicon caulking. Epoxy type glues must not be used. The lavatory is supplied with a template which must be used for the countertop cut-out. Important: For granite or marble tops, fi x two 1" (20mm) thick wooden blocks in the bracket position on the underside of the granite/marble with fast setting two part epoxy. When fully set screw the brackets into position on the wooden blocks. Other suitable fastening systems may be used.
Color: White.
Dimensions: All dimensions are in inches and millimetres and are subject to normal manufacturing variations. Caroma pursues a policy of continuing improvement in design and performance of its products. The right is therefore reserved to vary specifications without notice.
20mm max.apron thickness
Note: Local authorities have requirements for minimumlavatory to wall dimensions.
Tie Hook
Wing nutand Washer
D250. Fixing Bracket
73/4" (200mm)
183 /
4" (4
75m
m)
23/4
"( 70m
m)
3"( 7
7mm
)
13/4
"( 45m
m)
153/4" (400mm)
51/8
"(1
30m
m)
51/8"(130mm)
107/8" (275mm)
131/2" (345mm)
57/8
"(1
50m
m)
11/8
"(2
8mm
)
65/8
"(1
68m
m m
in)
�-�������� ������ ��� ��� & ������
�-�������� ������ ��� ��� & ������
CI/SfB(74.2) n6
DateOctober 2008
Supersedes all previous issues
4.2Leda Vasque Semi-RecessedVitreous China Lavatories/SinkNominal Size 17" (430mm) diameter
Caroma International Pty Ltd. ABN 90 35 053 413 157
Leda VasqueSemi-Recessed
Vitreous China Lavatories/Sinks Lavatory Size: 17" (430mm) diameter (nominal)
A premium designed new concept semi-recessed lavatory incorporating generous size and distinctive curved bowl area. The lavatory is sealed to the counter top with an approved acetic cured silicon caulking.
Faucet Holes: The lavatory is available in no faucet hole only, Code No. 661148.
Drain Outlet: Drain outlets use 11/4" (32mm) diameter drain outlet assemblies.
Bowl Capacity: 0.97 gal (3.7 l) to overflow.
Overflow: Rear overflow.
Weight: 16.5 lb (7.5 kg).
Fixing: An approved acetic cured silicon caulking is to be used to secure the lavatory to the counter top. Epoxy type glues must not be used. The lavatory is supplied with a template which must be used for the counter top cut-out.
Colors: White and biscuit.
Dimensions: All dimensions are in inches and millimetres and are subject to normal manufacturing variations. Caroma pursues a policy of continuing improvement in design and performance of its products. The right is therefore reserved to vary specifications without notice.
3/4" (20mm) max.apron thickness
51/8
" (13
0mm
) min
. apr
on
15" (
380m
m) m
in re
com
men
ded
Finished FloorFinished Floor
Finished Wall
77/8" (200mm)
13/8
" (36
mm
)
53/4
"(1
46m
m)
61/8
" (15
5mm
)
4" (100mm)
31/8"(80mm) - 4"(100mm)17" (430mm) dia.
13" (330mm)
43/8
"(1
10m
m)
Acetic cured silicon caulking
IMPORTANT : Epoxy type glues must not be used
�-�������� ������ ��� ��� & ������
CI/SfB(74.2) n6
DateOctober 2008
Supersedes all previous issues
4.3Liano Semi-RecessedCeramic Lavatories/SinksNominal Size 161/2" (420mm) x 181/2" (470mm)
�-�������� ������ ��� ��� & ������
Caroma International Pty Ltd. ABN 90 35 053 413 157
LianoSemi-Recessed
Ceramic Lavatories/SinksLavatory Size: 161/2" (420mm) x 181/2" (470mm) (nominal)
The Liano Semi-Recessed lavatory has been designed to meet the needs of the designer market for prestige projects. An architectural minimalist style was adopted for the square Liano incorporating a generous bowl area and distinctive tapware platform. The lavatory is sealed to the countertop with an approved acetic cured silicon caulking.
Faucet Holes: Lavatory available in one faucet hole – centre option Code No. 661218 and three faucet hole – 8" option Code No. 661238.
Drain Outlet: Drain outlets use 11/4" (32mm) diameter drain outlet assemblies.
Bowl Capacity: 1.26 gal (4.8 l) to overfl ow.
Weight: 31 lbs (14 kg).
Overflow: Rear overflow.
Fixing: D.250 Bracket with Tie Hooks: Supplied. Recommended for domestic and general commercial use. Two D.250 brackets are fixed to the underside of the counter top to secure the tie hooks which anchor the back of the lavatory to the counter top. The lavatory must be sealed to the top and front surface of the counter with an approved acetic cured silicon caulking. Epoxy type glues must not be used. The lavatory is supplied with a template which must be used for the countertop cut-out. Important: For granite or marble tops, fi x two 1" (20mm) thick wooden blocks in the bracket position on the underside of the granite/marble with fast setting two part epoxy. When fully set, screw the brackets into position on the wooden blocks. Other suitable fastening systems maybe used.
Color: White.
Dimensions: All dimensions are in inches and millimetres and are subject to normal manufacturing variations. Caroma pursues a policy of continuing improvement in design and performance of its products. The right is therefore reserved to vary specifications without notice.
5" (1
25m
m)
min
. apr
on
Tie Hook
Wing nutand Washer
D.250 Tie Bracket
10 Gauge Screws(Not Supplied)
3/4" (20mm) max.apron thickness
Variable when using D. 250 Tie Brackets.Note: Local authorities have requirements forminimum lavatory to wall dimensions.
21/8
" (55
mm
)
23/8
" (60
mm
)18
1 /2"
(470
mm
)
161/2" (420mm)11/2"
(40mm)
65/8
" (170
mm
)11
/8" (3
0mm
)
65/8"(170mm)
121/2"(320mm)
53/8
"(1
35m
m)
6" (150mm)
77/8" (200mm)
�-�������� ������ ��� ��� & ������
Section 05
Lavatory/SinksSelf-Rimming
CI/SfB(74.2) n6
DateOctober 2008
Supersedes all previous issues
5.1Liano Self-RimmingVitreous China Lavatories/SinksNominal Size 163/8" (415mm) x 163/8" (415mm)
�-�������� ������ ��� ��� & ������
Caroma International Pty Ltd. ABN 90 35 053 413 157
LianoSelf-Rimming
Vitreous China Lavatories/Sinks Lavatory Size: 163/8" (415mm) x 163/8" (415mm) (nominal)
The Liano Self-Rimming lavatory has been designed to meet the needs of the designer market for prestige projects. An architectural minimalist style was adopted for the square Liano incorporating a generous bowl area and distinctive tapware platform. The rim is sealed to the countertop with an acetic cured silicone caulking.
Faucet Holes: Lavatory available in: one faucet hole – centre option Code No. 664718 and three faucet hole 8"option Code No. 664738.
Drain Outlet: Drain outlets use 11/4" (32mm) diameter drain outlet assemblies.
Bowl Capacity: 1.26 gal (4.8 l) to overflow.
Weight: 31 lbs (14 kg).
Overflow: Rear overflow.
Fixing: The underside of the lavatory rim must be sealed to the countertop with an approved acetic cured silicon caulking. Epoxy type glues must not be used. The lavatory is supplied with a template which must be used for the countertop cut-out.
Color: White.
Dimension: All dimensions are in inches and millimetres and are subject to normal manufacturing variations. Caroma pursues a policy of continuing improvement in design and performance of its products. The right is therefore reserved to vary specifications without notice
Acetic cured silicon caulking
IMPORTANT: Epoxy type glues must not be used
65/8" (170mm)
65/8
" (17
0mm
)11
" (28
mm
)
53/8
"(1
35m
m)
77/8" (200mm)
163 /
8" (4
15m
m)
21/4
"(5
7mm
)
163/8" (415mm)
11/2"(40mm)
�-�������� ������ ��� ��� & ������
Section 06
Lavatory/SinksUnder Counter
CI/SfB(74.2) g3
DateOctober 2008
Supersedes all previous issues
6.1Liano Under CounterVitreous China Lavatories/SinksNominal Size 17" (430mm) x 17" (430mm)
�-�������� ������ ��� ��� & ������
LianoUnder Counter
Vitreous China Lavatories/SinksLavatory Size 17" (430mm) x 17" (430mm) (nominal)
The Liano Under Counter lavatory has been designed to meet the needs of the designer market for prestige projects. An architectural minimalist style was adopted for the square Liano. The lavatory is suitable for general purpose applications. The rim is sealed to the underside of the countertop with an acetic cured silicon caulking.
Faucet Holes: Available in no faucet hole Code No. 664208. The lavatory is intended for use with counter top or wall mounted tapware.
Drain Outlet: Drain outlets use 11/4" (32mm) diameter drain outlet assemblies.
Installation: The Liano Under Counter is suitable for installation under polyester, marble, natural stone, or other suitable impervious materials.
Bowl Capacity: 2.9 gal (9 l) to overflow.
Weight: 21 lbs (10 kg).
Overflow: Rear overflow.
Fixing: Aluminium Clip Bracket Code No. 813734 supplied as standard for fixing lavatory to marble or granite countertops. Alloy Bracket Code No. 811326 (not supplied) is available as an option for fixing lavatory to wooden counter tops. Four brackets are supplied with each lavatory and must be fixed to the underside of the countertop with appropriate fasteners. The rim of the lavatories must be sealed to the countertop with an approved acetic cured silicon caulking. Epoxy type glues must not be used.The lavatory is supplied with a template which must be used for the countertop cut-out.
Color: White.
Dimensions: All dimensions are in inches and millimetres and are subject to normal manufacturing variations. Caroma pursues a policy of continuing improvement in design and performance of its products. The right is therefore reserved to vary specifications without notice.
Counter top
Aluminium clip BracketCode No.813734
Cabinet Fixing
Alloy Bracket
Alloy BracketCode No.811326
Marble Top
Fix timber blocksto top with 2 part epoxy
Aluminium clip Bracket
2 x Gauge 10 pan head screws 3/4" (20mm)
Ensure fixing brackets are clear of bowl
IMPORTANTUse only an acetic
cured silicon caulkingEpoxy type glues must not be used.
LavatoryLavatory
Marble top fixing
17" (430mm)
151/8" (385mm)
1 " (25mm)
23/4" (69mm)
67/8
" (17
5mm
)
3"(77mm)
11/2" (40mm)
3 /4"
(20m
m)
17" (
430m
m)
151 /
8" (3
85m
m)
1/2"(12mm)
Caroma International Pty Ltd. ABN 90 35 053 413 157
�-�������� ������ ��� ��� & ������
Section 07
Lavatory/SinksWall Mount
and Pedestal
CI/SfB(74.2) g3
DateOctober 2008
Supersedes all previous issues
7.1Adelaide Wall Mount and PedestalVitreous China Lavatories/SinksNominal Size 197/8" (505mm) x 193/4" (500mm)
Caroma International Pty Ltd. ABN 90 35 053 413 157
AdelaideWall Mount andPedestal
Vitreous China Lavatories/Sinks Lavatory Size: 197/8" (505mm) x 193/4" (500mm) (nominal)
The Adelaide wall lavatory is crafted from high density vitreous china. It is a modern lavatory design with a European influence. The lavatory features a round bowl with smooth lines for easy cleaning. The wall lavatory can be fitted with a matching shroud to conceal the pipe work or a matching pedestal.
Faucet Holes: Lavatory available in one faucet – centre option Code No. 861818 and three faucet 8" option Code No. 861838.
Drain Outlet: Drain outlets use 11/4" (32mm) diameter drain outlet assemblies.
Pedestal: Adelaide Pedestal, Code No. 812168. Accurate setout and use of recommended traps is essential for optimum installation. S-trap – 40mm standard Caroma plastic traps.
Shroud: Adelaide Shroud, Code No. 812158. Completely conceals P-trap waste pipe fittings. Use D.210 fixing clip suitable with D.200 Lavatory Fixing Kit and 40mm Caroma plastic P-trap Code No. 102115. Note: It is essential for the installation of the shroud to the lavatory that clearance is provided for the shroud in the plumbing setout from water inlet pipes and connections.
Bowl Capacity: 0.66 gals (2.5 l) to overflow.
Weight: 35 lbs (16kg).
Overflow: Rear overflow.
Fixing: D.200 Lavatory Fixing Kit: Supplied. Bolts directly to the finished wall.
Colors: White and biscuit.
Dimensions: All dimensions are in inches and millimetres and are subject to normal manufacturing variations. Caroma pursues a policy of continuing improvement in design and performance of its products. The right is therefore reserved to vary specifications without notice.
Finished Floor
Shroud OptionCode No.812158
D.200 fixing hole centres
D.210 Concealed Fixing Clip Assemblyincluded with shroud
D.200 Lavatory Fixing Kit
Inlet positionto allow forshroud
PedestalCode No.812168
91/2
" (24
0mm
)fro
m fr
ont e
dge
of s
hrou
d
Yorkshire 1/2" x 1/2"
Number 10
300mmFlexible
coupling
Shroudinlet detail
32" (
815m
m) a
ppro
x. D
.200
Fix
ing
Cen
tre
40
117 /
8" (3
00m
m)
Hot
and
col
dw
ater
inle
t cen
tre
31/8"(80mm)
105/8" (270mm)
101/2" (265mm)
331 /
2" (8
50m
m) 11
7 /8"
(300
mm
)73
/8"
(187
mm
)
161 /
2" (4
18m
m)
197/8" (505mm)
23/8
" (65
mm
)
193 /
4" (5
00m
m)
8" (205mm)
105/8" (270mm)
107/8" (275mm)
�-�������� ������ ��� ��� & ������
CI/SfB(74.2) g3
DateOctober 2008
Supersedes all previous issues
7.2Brisbane 400 Wall Mount and PedestalVitreous China Lavatories/SinksNominal Size 153/4" (400mm) x 181/2" (470mm)
Caroma International Pty Ltd. ABN 90 35 053 413 157
Brisbane 400Wall Mount and Pedestal
Vitreous China Lavatories/SinksLavatory Size: 153/4" (400mm) x 181/2" (470mm)
A minimalist geometric designed wall lavatory incorporating a generous bowl area and distinctive tapware platform. The Brisbane 400 has been designed to coordinate with other products in the Brisbane range and is available with a pedestal or shroud. The lavatory is suitable for general purpose domestic and commercial applications.
Faucet Holes: Lavatory available in no faucet hole option Code No. 851408, one faucet hole – centre option Code No. 851418, and three 8" faucet hole option Code No. 851438.
Drain Outlet: Drain outlets use 11/4" (32mm) diameter drain outlet assemblies.
Pedestal: Brisbane pedestal, Code No. 812248. Accurate setout and use of recommended traps is essential for optimum installation. S-trap – 40mm standard Caroma plastic traps.
Shroud: Brisbane shroud, Code No. 812258. Completely conceals P-trap waste pipe fi ttings. Use concealed fi xing bracket – supplied. Note: It is essential for the installation of the shroud to the lavatory that clearance is provided for the shroud in the plumbing setout from water inlet pipes and connections.
Bowl Capacity: 0.66 gals (2.5 l) to overflow.
Weight: 25 lbs (11 kg).
Overflow: Rear overflow.
Fixing: D.200 Lavatory Fixing Kit: Supplied. Bolts directly to the finished wall.
Color: White.
Dimensions: All dimensions are in inches and millimetres and are subject to normal manufacturing variations. Caroma pursues a policy of continuing improvement in design and performance of its products. The right is therefore reserved to vary specifications without notice.
23/4
"( 70m
m)
73/4" (200mm)
73/4" (200mm)
53/4
"(1
45m
m)
107/8" (275mm)
31/8"(80mm)
87/8"(225mm)
123/4"(325mm)
21 /
2"(6
5mm
) 1
5 /8"
(42m
m)
153/4"(400mm)
15"
(380
mm
)
181
/2" (4
70m
m)
D.200 fixing hole centres
Finished Floor
33" (
840m
m) a
ppro
x. w
ith p
edes
tal
Rec
omm
ende
d 34
" (86
5mm
) w
ithou
t ped
esta
l
Concealed Fixing Bracketincluded with shroud
Plastic Cap
Fixing Stud
Plastic Sleeve
32" (
815m
m) a
ppro
x. D
.200
Fix
ing
hole
s
311 /
8" (7
90m
m) a
ppro
x. D
.200
Fix
ing
hole
s
Pedestal OptionCode No.812248
Shroud OptionCode No.812258
Inlet positionto allow forshroud
125 /
8" (3
20m
m)
Hot
and
col
dw
ater
inle
t cen
tre
281 /
2" (7
22m
m) a
ppro
x. C
once
aled
Fi
Bra
cket
Cen
tre
)
M & F1/2" brass
elbowwith
shroudonly
Flexiblecoupling
D.200 Lavatory Fixing Kit included with lavatory
�-�������� ������ ��� ��� & ������
�-�������� ������ ��� ��� & ������
CI/SfB(74.2) g3
DateOctober 2008
Supersedes all previous issues
7.3Brisbane 500 Wall Mount and PedestalVitreous China Lavatories/SinksNominal Size 195/8" (500mm) x 221/2" (570mm)
Caroma International Pty Ltd. ABN 90 35 053 413 157
Brisbane 500Wall Mount and Pedestal
Vitreous China Lavatories/SinksLavatory Size: 195/8" (500mm) x 221/2" (570mm) (nominal)
A minimalist geometric designed wall lavatory incorporating a generous bowl area and distinctive tapware platform. The Brisbane 500 has been designed to coordinate with other products in the Brisbane range and is available with a pedestal or shroud. The lavatory is suitable for general purpose domestic and commercial applications.
Faucet Holes: Lavatory available in no faucet hole option Code No. 863308, one faucet hole – centre option Code No. 863318, and three 8" faucet hole option Code No. 863338.
Drain Outlet: Drain outlets use 11/4" (32mm) diameter drain outlet assemblies.
Pedestal: Brisbane pedestal Code No. 812248. Accurate setout and use of recommended traps is essential for optimum installation. S-trap – 40mm standard Caroma plastic traps.
Shroud: Brisbane shroud Code No. 812258. Completely conceals P-trap waste pipe fi ttings. Use concealed fi xing bracket – supplied. Note: It is essential for the installation of the shroud to the lavatory that clearance is provided for the shroud in the plumbing setout from water inlet pipes and connections.
Bowl Capacity: 1.18 gals (4.5 l) to overflow.
Weight: 40 lbs (18 kg).
Overflow: Rear overflow.
Fixing: D.200 Lavatory Fixing Kit: Supplied. Bolts directly to the finished wall.
Color: White.
Dimensions: All dimensions are in inches and millimetres and are subject to normal manufacturing variations. Caroma pursues a policy of continuing improvement in design and performance of its products. The right is therefore reserved to vary specifications without notice.
Shroud OptionCode No.812258
Inlet positionto allow forshroud
281
/4" (
717m
m) a
ppro
x. C
once
aled
Fi
Bra
cket
Cen
tre
M & F1/2" brass
elbowwith
shroudonly
Flexiblecoupling
32" (
815m
m) a
ppro
x. D
.200
Fix
ing
hole
s
311 /
4" (7
95m
m) a
ppro
x. D
.200
Fix
ing
hole
s
Pedestal OptionCode No.812248
D.200 Lavatory Fixing Kit included with lavatory
73/4" (200mm)
9" (230mm)
141/2" (370mm)
21 /
2"(6
5mm
)
221
/2"
(570
mm
)
195/8" (500mm)
23/4" (70mm)
2"
(52m
m)
31/8"(80mm)
87/8"(225mm)
151 /
8" (3
85m
m)
61/4
"(1
60m
m)
121/2" (320mm)
33" (
840m
m) a
ppro
x. w
ith p
edes
tal
Rec
omm
ende
d 34
" (86
5mm
) w
ithou
t ped
esta
l
125 /
8" (3
20m
m)
Hot
and
col
dw
ater
inle
t cen
tre
Concealed Fixing Bracketincluded with shroud
Plastic Cap
Fixing Stud
Plastic Sleeve
�-�������� ������ ��� ��� & ������
�-�������� ������ ��� ��� & ������
CI/SfB(74.2) g3
DateOctober 2008
Supersedes all previous issues
7.4Liano Wall MountVitreous China Lavatories/SinksNominal Size 161/2" (420mm) x 181/2" (470mm)
Caroma International Pty Ltd. ABN 90 35 053 413 157
LianoWall Mount
Vitreous China Lavatories/SinksLavatory Size: 161/2" (420mm) x 181/2" (470mm) (nominal)
The Liano wall lavatory has been designed to meet the needs of the designer market for prestige projects. An architectural minimalist style was adopted for the square Liano incorporating a generous bowl area and distinctive tapware platform. The lavatory is suitable for general purpose domestic and commercial applications.
Faucet Holes: Lavatory available in no faucets Code No. 649308, one faucet – centre option Code No. 649318, and three faucet option Code No. 649338.
Drain Outlet: Drain outlets use 11/4" (32mm) diameter drain outlet assemblies.
Shroud: Liano shroud, Code No. 812268 completely conceals P-trap waste pipe fi ttings. Use concealed fi xing bracket – supplied. Note: It is essential for the installation of the shroud to the lavatory that clearance is provided for the shroud in the plumbing setout from water inlet pipes and connections.
Bowl Capacity: 1.26 gals (4.8 l) to overflow.
Weight: 31 lbs (14 kg).
Overflow: Rear overflow.
Fixing: D.200 Lavatory Fixing Kit: Supplied. Bolts directly to the finished wall.
Color: White.
Dimensions: All dimensions are in inches and millimetres and are subject to normal manufacturing variations. Caroma pursues a policy of continuing improvement in design and performance of its products. The right is therefore reserved to vary specifications without notice.
321 /
4" (8
20m
m)
appr
ox. D
.200
Fix
ing
Cen
tre
Finished Floor
ShroudOptionCode No.812260
34"( 8
65m
m) R
ecom
men
ded
111
/4" (2
87m
m)
from
fron
ted
ge o
f shr
oud
181 /
2" (4
70m
m)
77/8" (200mm)
77/8" (200mm)
161/2" (420mm)
161 /
2" (4
20m
m)
21/8
" (55
mm
)
23/8" (60mm)
65/8
" (170
mm
)
65/8"(170mm)
11/2"(40mm)
61/4
" (16
0mm
)
11" (280mm)
31/8"(80mm)
115 /
8" (3
20m
m)
Hot
and
col
dw
ater
inle
t cen
tre
D.200 Lavatory Fixing Kit included with lavatory
�-�������� ������ ��� ��� & ������
Section 08
Lavatory/SinksAbove Counter
and Inset
CI/SfB(74.2) g3
DateOctober 2008
Supersedes all previous issues
8.1Adelaide Above Counter/InsetVitreous China Lavatories/SinksNominal Size 173/8" (440mm) diameter
�-�������� ������ ��� ��� & ������
Caroma International Pty Ltd. ABN 90 35 053 413 157
AdelaideAbove Counter/Inset
Vitreous China Lavatories/SinksLavatory Size: 173/8" (440mm) diameter (nominal)
A contemporary designed new concept above or inset vanity lavatory features simple smooth forms for easy cleaning. The Adelaide has been designed to compliment other products in the Adelaide range. The lavatory is sealed to the countertop with an acetic cured silicon caulking.
Faucet Holes: The lavatory is available in no faucet hole.
Above Counter: Code No. 891508Inset: Code No. 891608
Drain Outlet: Drain outlets use 11/4" (32mm) diameter drain outlet assemblies.
Bowl Capacity: 0.66 gal (2.5 l) to overflow.
Weight: 18 lbs (8 kg).
Overflow: Rear overflow.
Fixing: An approved acetic cured silicon caulking is to be used to secure the lavatory to the countertop. Epoxy type glues must not be used. The lavatory is supplied with a template which must be used for the countertop cut-out.
Colors: White and biscuit.
Dimension: All dimensions are in inches and millimetres and are subject to normal manufacturing variations. Caroma pursues a policy of continuing improvement in design and performance of its products. The right is therefore reserved to vary specifications without notice.
LavatoryBasin
LavatoryBasin
Counter top
Above Counter installationInset Counter installation
IMPORTANTUse only a acetic curedsilicon caulking.Epoxy type glues must not be used.
173/8" (440mm) dia.
91/2" (240mm) 91/2" (240mm)
53/4
"(1
45m
m)
11/4
"(3
0mm
)
�-�������� ������ ��� ��� & ������
�-�������� ������ ��� ��� & ������
CI/SfB(74.2) g3
DateOctober 2008
Supersedes all previous issues
8.2Brisbane Above CounterVitreous China Lavatories/SinksNominal Size 153/4" (400mm) diameter
Caroma International Pty Ltd. ABN 90 35 053 413 157
BrisbaneAbove Counter
Vitreous China Lavatories/SinksLavatory Size: 153/4" (400mm) diameter (nominal)
A minimalist geometric designed above counter vanity lavatory. The Brisbane Above Counter lavatory has been designed to coordinate with other products in the Brisbane range. The lavatory is suitable for general purpose domestic and commercial applications. The lavatory is sealed to the countertop with an acetic cured silicon caulking.
Faucet Holes: The lavatory is available in no faucet hole only, Code No. 892608.
Drain Outlet: Drain outlets use 11/4" (32mm) diameter drain outlet assemblies.
Bowl Capacity: 0.66 gal (2.5 l) to overflow.
Weight: 18 lbs (8 kg).
Overflow: Rear overflow.
Fixing: An approved acetic cured silicon caulking is to be used to secure the lavatory to the countertop. Epoxy type glues must not be used. The lavatory is supplied with a template which must be used for the countertop cut-out.
Color: White.
Dimension: All dimensions are in inches and millimetres and are subject to normal manufacturing variations. Caroma pursues a policy of continuing improvement in design and performance of its products. The right is therefore reserved to vary specifications without notice.
Acetic cured silicon caulkingIMPORTANT : Epoxy type glues must not be used
73/4" (200mm)141/2" (370mm)
153/4" (400mm) dia.
53/4
"(1
46m
m)
5"(1
25m
m)
�-�������� ������ ��� ��� & ������
�-�������� ������ ��� ��� & ������
CI/SfB(74.2) g3
DateOctober 2008
Supersedes all previous issues
8.3Leda Vasque Above CounterVitreous China Lavatories/SinksNominal Size 17" (430mm) diameter
Caroma International Pty Ltd. ABN 90 35 053 413 157
Leda VasqueAbove Counter
Vitreous China Lavatories/Sinks Lavatory Size: 17" (430mm) diameter (nominal)
A premium designed new concept above counter lavatories incorporate generous size and distinctive curved bowl area. The lavatory is sealed to the countertop with an approved acetic cured silicon caulking.
Faucet Holes: The lavatory is available in no faucet hole only Code No. 651048.
Drain Outlet: Drain outlets use 11/4" (32mm) diameter drain outlet assemblies.
Bowl Capacity: 0.97 gal (3.7 l) to overflow.
Weight: 16.5 lbs (7.5 kg).
Overflow: Rear overflow.
Fixing: An approved acetic cured silicon caulking is to be used to secure the lavatory to the counter top. Epoxy type glues must not be used. The lavatory is supplied with a template which must be used for the countertop cut-out.
Colors: White and biscuit.
Dimension: All dimensions are in inches and millimetres and are subject to normal manufacturing variations. Caroma pursues a policy of continuing improvement in design and performance of its products. The right is therefore reserved to vary specifications without notice.
51/4
" (1
47m
m)
61/8
"(1
56m
m)
31/8
" –
4"
(80
– 10
0mm
)
10" (250mm) min.
Finished Floor Finished Floor
Finished Wall
77/8 " (200mm)
17" (430mm) dia.
Approved acetic cured silicon caulking
87/8"(225mm)
IMPORTANT : Epoxy type glues must not be used
�-�������� ������ ��� ��� & ������
c -UPCIAPMO listed for USA & Canada
CI/SfB(74.2) n6
DateOctober 2008
Supersedes all previous issues
8.4Leda Vasque InsetVitreous China Lavatories/SinksNominal Size 17" (430mm) diameter
Caroma International Pty Ltd. ABN 90 35 053 413 157
Leda VasqueInset
Vitreous China Lavatories/Sinks Lavatory Size: 17" (430mm) diameter (nominal)
A premium designed new concept inset lavatory vessel incorporating generous size and distinctive curved bowl area. The lavatory is sealed to the countertop with an approved acetic cured silicon caulking.
Faucet Holes: The lavatory is available in no faucet hole only Code No. 661048.
Drain Outlet: Drain outlets use 11/4" (32mm) diameter drain outlet assemblies.
Bowl Capacity: 0.97 gal (3.7 l) to overflow.
Weight: 16.5 lbs (7.5 kg).
Overflow: Rear overflow.
Fixing: An approved acetic cured silicon caulking is to be used to secure the lavatory to the countertop. Epoxy type glues must not be used. The lavatory is supplied with a template which must be used for the countertop cut-out.
Colors: White.
Dimension: All dimensions are in inches and millimetres and are subject to normal manufacturing variations. Caroma pursues a policy of continuing improvement in design and performance of its products. The right is therefore reserved to vary specifications without notice.
3"(7
5mm
)
61/8
"(1
55m
m)
10" (250mm) min.
Finished Floor Finished Floor
Finished Wall
77/8" (200mm)
17" (430mm) dia.
Approved acetic cured silicon caulking
127/8" (328mm)
IMPORTANT : Epoxy type glues must not be used
31/8
" –
4"(8
0 –
100m
m)
c -UPCIAPMO listed for USA & Canada
�-�������� ������ ��� ��� & ������
CI/SfB(74.2) n6
DateOctober 2008
Supersedes all previous issues
8.5Liano Above CounterVitreous China Lavatories/SinksNominal Size 161/2" (420mm) x 181/2" (470mm)
Caroma International Pty Ltd. ABN 90 35 053 413 157
LianoAbove Counter
Vitreous China Lavatories/SinksLavatory Size: 161/2" (420mm) x 181/2" (470mm) (nominal)
The Liano Above Counter lavatory has been designed to meet the needs of the designer market for prestige projects. An architectural minimalist style was adopted for the square Liano incorporating a generous bowl area and distinctive tapware platform. The rim is sealed to the countertop with an acetic cured silicon caulking.
Faucet Holes: Lavatory available in no faucet hole option Code No. 664408, one faucet hole – centre option Code No. 664418, and three faucet hole option Code No. 664438.
Drain Outlet: Drain outlets use 11/4" (32mm) diameter drain outlet assemblies.
Bowl Capacity: 1.26 gal (4.8 l) to overflow.
Weight: 31 lbs (14 kg)
Overflow: Rear overflow.
Fixing: The underside of the lavatory rim must be sealed to the countertop with an approved acetic cured silicon caulking. Epoxy type glues must not be used. The lavatory is supplied with a template which must be used for the countertop cut-out.
Color: White.
Dimension: All dimensions are in inches and millimetres and are subject to normal manufacturing variations. Caroma pursues a policy of continuing improvement in design and performance of its products. The right is therefore reserved to vary specifications without notice.
Acetic cured silicon caulking
IMPORTANT: Epoxy type glues must not be used
65/8" (170mm)
65/8
" (17
0mm
)
53/8
"(1
35m
m)
181 /
2" (4
70m
m)
77/8" (200mm)
21/8
" (55
mm
)
161/2" (420mm)
11/2"(40mm)
23/8
" (60
mm
)
�-�������� ������ ��� ��� & ������
c -UPCIAPMO listed for USA & Canada
CI/SfB(74.1) g3
DateAugust 2009
Supersedes all previous issues
9.1Cube3 Ultra 0.13 gpf (0.5 lpf) Electronic Activation Urinal SuiteSmart Demand ‘Urine Sensing’ Flushing System With Vitreous China Wall-Hung Box Rim Urinal
Caroma International Pty Ltd. ABN 90 35 053 413 157
Cube3 Ultra0.13 gpf (0.5 l)HEU
Smart Demand ‘Urine Sensing’ Flushing SystemInwall/Induct/InceilingWith Vitreous China Wall-Hung Box Rim Urinal
A contemporary design fully integrated box rim, wall mounted urinal operating with a ultra low flush of 0.13 gpf (0.5 liter). The system incorporates a fully automatic electronic smart demand ‘Urine Sensing’ urinal suite featuring hands-free operation to give a combination of superior features in optimum user hygiene, water saving and vandal resistance. Cube3 Ultra combines the new smart demand flushing system with the Cube3 Ultra urinal ensuring optimal operational standards and efficiency. The sensor is concealed behind the urinal resulting in vandal resistant installation ideal for heavy-duty applications. The sensor device is factory fitted for ease of installation.
Inlet: Back inlet for concealed nominal 3/4" (20mm) diameter (stubbed down to 1/2"/12.7mm inlet) sparge pipe and compression rubber fitting.
Outlet: The urinal trap is connected to wall waste pipe which allows for a simple push on urinal connection.
Inwall: Automatic urinal flush system suitable for minimum cavity thickness of 4"(100mm).Induct: Automatic urinal flush system.Inceiling: Automatic urinal flush system.Electronic Urinal Suite:
Wall mounted urinal suite Code No. 678650. Electronics Code No. 687278.
Flush Control Mechanism:
Smart demand ‘Urine Sensing’ operation with an integrated smart logic system, detects user and determines flush mode accordingly. The flush duration is adjustable to allow for the accurate determination of flush volume at varying pressures.Stadium operation: 5 or more uses within a time period of three minutes = 1 flush/minute. Automatically reverts to normal usage at non-peak periods.
Hygienic Flush: Hygienic flush every 24 hours prevents the trap seal from drying out.Electronic Valve:The operating voltage of the valve is 6 volts. The operation flow pressure of the valve is
43.5 to 72.5 psi (300 to 500 kPa) 981/2' to 164' (30 to 50 metres head) with a minimum flow to the valve of 5.3 gallons/minute (20 litres/minute). The valve incorporates an integral airbreak system and shut off valve.
Battery operated:
Supply voltage-transformer. Operating current 9 volts (6 x 1.5v AA batteries).
Installation: Provide conduit without kinks to connect the sensor cable to the control box. 3.5m of sensor cable supplied as standard. Minimum supply diameter of nominal 3/4" (20mm) is required to the valve.
Dimensions All dimensions are in inches and millimetres and are subject to normal manufacturing variations. Caroma pursues policy of continued improvement in design and performance of its products. The right is therefore reserved to vary specifications without notice.
Color: White.
263 /
8" (6
70m
m)
135 /
8" (3
45m
m)
101/4" (260mm)
18"
(458
mm
)
Finished Floor
D.167 Concealed Fixing Bracket(wall fixings not supplied)
Plastic Cap
FixingStud
Plastic Sleeve
Vitreous china grate
145 /
8" (3
71m
m)
P-tra
p ou
tlet c
entre
Inlet Centre 21/2" (65mm)
*
241 /
4" (6
15m
m) a
ppro
x.D
.167
Con
ceal
ed F
ixin
g B
rack
et
* 24" (610mm) recommended standard height 17" (432mm) recommended disabled height
31/8"(80mm)
c -UPCIAPMO listed for USA & Canada
Caroma International Pty Ltd. ABN 90 35 053 413 157
241 /
4" (6
15m
m) a
ppro
x.D.
167
Conc
eale
d Fi
Bra
cket
31/8"(80mm)
43/4" (121m
m)
4" (103mm
)
33/4" (95mm)43/8" (110mm)
5" (127mm)
* 24" (610mm) recommended standard height 17" (432mm) recommended disabled height
Important:Install flexible electicalconduit pipe to protectcable
Allow access for theconnection andservicing of allelectrical components
Sensor Control
Induct InstallationInwall Installation
Sensor
Sensor Control Unit
19" (
0.5m
) min
. 1
18" (
3m) m
ax.
IntegralAirbreak
SolenoidShut off valve
1/2" BSP
3/4" BSP male
COMPACTHF Urinal
SENSOR
9 volt battery power supply unit
*Finished Floor
Inceiling Installation
Sensor
SensorControlUnit
Copper flush pipeNominal 3/4" (20mm)
Copper flush pipeNominal 3/4" (20mm)(stubbed to 1/2"/13mmat inlet)
Sensor cable
Finished Floor
Sensor
SensorControlUnit
9 volt batterypower supply unit
9 volt batterypower supply unit
9 volt batterypower supply unit
Sensor cable
3/4” to 1/2” elbow(20mm-13mm)
18" (
458m
m)
145 /
8" (3
71m
m)
P-tr
ap o
utle
t cen
tre
Inlet Centre 21/2" (65mm)
2" (50mm) PVC DWV or ABS DWV
2° Slope
1" (26mm)
Nominal 1/2" (13mm)sparge brass pipe(not supplied)
35
Kee Seal supplied to suit PVC or ABS
DWV outlet connection
Caroma International Pty Ltd. ABN 90 35 053 413 157
145 /
8" (3
71m
m)
P-tra
p ou
tlet c
entre
2" (5
2mm
) 35
/8"
(92m
m)
11/2" (40mm)
3/4" (20mm)
241 /
4" (6
15m
m) a
ppro
x.D
.167
Con
ceal
ed F
ixin
g B
rack
et
Plastic Waste trap
Centre of Urinal
31/8" (80mm)
CI/SfB(74.4) g3
DateNovember 2008
Supersedes all previous issues
9.2H2Zero Waterless UrinalVitreous China Wall-Hung Urinal
Caroma International Pty Ltd. ABN 90 35 053 413 157
Caroma H2ZeroWaterless Urinal
Vitreous China Wall-Hung Urinal
A modern design wall mounted urinal providing superior waterless technology for optimum water effi ciency. The Caroma H2Zero™ waterless urinal has been designed to utilize unique cartridge technology. The patented cartridge incorporates a Bio Seal™ that opens during usage and self seals immediately after use allowing for discharge into a 2" liquid seal trap. A replaceable Bio Fresh deodorizing block maintains the aesthetics of the urinal bowl by assisting in the dissipation of uric salts and releasing a pleasant fragrance. The urinal incorporates concealed plumbing connections and easy to clean surfaces for minimum low cost maintenance. The metal grate is vandal resistant and a specially designed tool is used for the touch-free replacement of the Bio Seal and Bio Fresh deodorizing block.
Urinal: Waterless urinal Code No. 678500. Service kit Code No. 687334.
Trap: The unique one way Bio Seal opens with usage and self seals immediately allowing for discharge into a 2" liquid seal trap.
Outlet: The urinal outlet is connected to a 2" (50mm) PVC DWV drain pipe connector.
Fixing: The Caroma H2Zero waterless urinal is fi xed to the wall with the D.400 concealed fi xing bracket supplied.
Fittings: Vandal resistant metal grate supplied as standard.
Color: White.
Installation: The urinal must be installed in accordance with the American National Standard Uniform Plumbing Code. Local authorities have varying requirements.
Weight: 48 lb (22 kg).
Dimensions: All dimensions are in inches and millimetres and are subject to normal manufacturing variations. Caroma pursues a policy of continuing improvement in design and performance of its products. The right is therefore reserved to vary specifications without notice.
14"
(355
mm
)
17" (432mm)
29" (
735m
m) a
ppro
x.
D.4
00 C
once
aled
Fix
ing
Bra
cket
77/8"(200mm)
* 24" (610mm) US recommended standard height 17" US recommended ADA disabled height
291 /
4" (7
45m
m)
Plastic Cap
Plastic Sleeve
Fixing Bracket
Fixing Stud
D.400 Concealed Fixing Bracket(Wall fixings not supplied)
*
Finished Floor
D.400 ConcealedFixing Bracket
Liquid Seal Trap
2" (50mm)Drain/waste Pipe
51/4"(135mm)
151 /
2" (3
95m
m)
outle
t cen
tre w
ith5˚
slo
pe to
wal
l
Caroma International Pty Ltd. ABN 90 35 053 413 157
*
Finished Floor
D.400 ConcealedFixing Bracket
Liquid Waste Trap
2" (50mm)Drain/waste Pipe
2" (50mm)Drain/wastePipe
51/4"(135mm)
151 /
2" (3
95m
m)
outle
t cen
tre w
ith5˚
slo
pe to
wal
l
Liquid Seal Trap(Wall fixing screws not supplied)
Liquid Seal Trap
2” USA PVC KeesealCode No. 091092
Trap Bracket
13/8"(35mm)
Code No.687299
Bio Fresh DeodoriserAssembly
Vandal ResistantMetal Grate
ReplaceableBio Fresh Block
Replaceable Bio SealTM
Waste Body
Bio Fresh Deodoriser Assembly
.xorppa )m
m537( "92
tekcarB gnixiF delaecno
C 004.D
77/8"(200mm)
Liquid Seal Trap
Specially designed toolfor Bio SealTM andBio Fresh replacement
Caroma International Pty Ltd. ABN 90 35 053 413 157