Carmel Process Solutions Presentation

17
Carmel Process Solutions Carmel Process Solutions Capabilities Key Personnel Engineering Capabilities Skid Fabrication Vendor Representation Affiliations

description

 

Transcript of Carmel Process Solutions Presentation

Page 1: Carmel Process Solutions Presentation

Carmel Process Solutions

Carmel Process Solutions Capabilities Key Personnel Engineering CapabilitiesSkid FabricationVendor RepresentationAffiliations

Page 2: Carmel Process Solutions Presentation

System Integration Services Process & CIP System Design Package including;

All Equipment SpecificationsPlan View/Isometric Piping Detail Design Complete Installation Drawings

Automation/Control System Design/FabricationProject Management

Equipment checkout FAT and PAT of process & CIP equipment Equipment installation review process Software simulation or software FAT

Utility Load Calculations for Process & CIP EquipmentComplete Installation Services Documentation Commissioning, & Start Up ServicesCompetitive bidding of ALL Processing Equipment

Page 3: Carmel Process Solutions Presentation

Key PersonnelDonald J. Audia: 17 years of food, dairy, beverage, and pharmaceutical industry experience having an emphasis towards project management and implementation procedures

Equipment Specifications, Service, & SalesVendor RelationshipsTechnical SupportEquipment & Instrument Specifications Modular Systems design & fabrication assistanceOn Site Installation & Supervision

Page 4: Carmel Process Solutions Presentation

Key Personnel continued

James A. Williams, P.E.: Thirty (34) years of experience in the food, nutritional, and pharmaceutical process design, including mechanical & electrical design as well as project management.

Colby Powder – INFANT FORMULA POWDER BLENDINGInvolved in all aspects of this project from the preliminary engineering, and cost estimation, to process design for a grassroots infant formula powder blending and packaging facility, located near Bangkok, Thailand. This facility utilitized modular construction for the process and packaging operation.

Eli Lilly & Company, Inc. – HIGH PURITY WATER SYSTEMInvolved in all aspects of this project from the preliminary engineering, and cost estimation, to process design and weld documentation for the installation of new stainless steel for high purity water piping system for two large research laboratory buildings.

Mead Johnson & Company - INFANT FORMULA PROCESS FACILITYProject engineer for new liquid infant formula concentrate process facility. Responsible for all process and electrical design, equipment specifications and procurement, installation and commissioning.

Page 5: Carmel Process Solutions Presentation

Welding TrainingMember AWS James A.

Williams, P.E.

Member of D18.1 Welding Committee

Responsible for the development of AWS standards for welded products requiring a high degree of clean ability. Applications include the dairy and other food processing industries and also nonfood processing applications where clean ability is a primary consideration.

Page 6: Carmel Process Solutions Presentation

Key Personnel continued

Bryan C. Wood: 29 years in the Controls/Automation Industry for Food & Dairy

Past ExperiencesDirector of Engineering for APV AMERICAS

Managing in house Process EngineeringAutomation and ACAD Design groups and sales presentations Annual turnover of approximately US$50 million dollars worldwideResponsible for preparation of Automation quotations and the review of all Process Engineering quotations.

APV New Zealand Limited - Auckland New ZealandAppointed Engineering Manager for APV New Zealand Food Systems SectorResponsible for all Automation sales and engineering for AustralasiaProcess and CAD engineering for New Zealand Division

Page 7: Carmel Process Solutions Presentation

Electrical Engineering

Page 8: Carmel Process Solutions Presentation

Panel Fabrication

Panel Design, Layout, and Fabrication

Motor Control Center Design and Fabrication

Page 9: Carmel Process Solutions Presentation

Equipment Layout

Page 10: Carmel Process Solutions Presentation

High Purity Skid Fabrication

RO Pump Distribution Skid

Ozone & Conductivity Sensors UV Disinfection SystemDiaphragm ValvesSample Valves

Page 11: Carmel Process Solutions Presentation

Modular Systems

HQ WaterMulti Stream BlendingBatch/Continuous BlendingStarch Processing

Product StandardizationCIP UnitsThermal Process SystemsHigh Shear Mixing

Page 12: Carmel Process Solutions Presentation

Utility SkidsPre-fabbed Utility Skids

Boiler SystemsAir Compressor Ice Builder PackageHot Water SetsHeat Recovery Systems

Page 13: Carmel Process Solutions Presentation

Process Piping Installation

Our installers meet high standards and comply with FDA, USDA, 3A, ASME, & B31.1 BPE quality guidelines.Capable of providing a 40-50 man crew for extended periodsHigh Purity & Sanitary Tube fabrication Equipment setting, hook-up, and start-upConfined Space Entry Fort Lift & Aerial Lift certified

Page 14: Carmel Process Solutions Presentation

Providing Equipment from Partial Listing

Waukesha Cherry- BurrellAdmixAlfa LavalAccuRate SystemsMicroMotionAmpco Pump CompanySundyne CorpCesco MagnetsLabel-AireRubberfab

Page 15: Carmel Process Solutions Presentation

Customers Present & Past

KrogerPepsi – Quaker OatsOtto & Sons, Inc.Hills Pet NutritionIams Pet FoodsRose Acre FarmsHeinzMorgan Foods

Sysmex AmericaMenza FoodsSiebert EngineeringAmerican LicoriceSmith-Wayne DairyReadington FarmsVan Drunen Farms

Page 16: Carmel Process Solutions Presentation

Affiliations

Page 17: Carmel Process Solutions Presentation

Carmel Process Solutions

Thank you for the opportunity!!Visit us at

www.carmelprocess.com