CARISMA - UAB "EXPOSITO"Carisma Serie CRS - High Pressure Fan Coil Units Carisma Serie CRS–ECM -...

NEWCARISMA –ECM

Fan Coil Units

Product Range

ENVIRONMENTAL COMFORTQuality management systems

ISO 9001 – Cert. n° 0545/4

ENVIRONMENTAL COMFORT

DUCK STRIP RADIANT PANELS: AEROSPATIALE TOULOUSENEW AIRBUS A380 PRODUCTION PLANT.

INSTALLATION HEIGHT: 40 m

SKYSTAR FAN COIL UNITS CASSETTE

JANUS 05 AND POLARIS AIR CONDITIONERS

Choose Sabiana, choose safety

Sabiana, the company

Choose SABIANA and you choose safety. Safetyin terms of products, performance and reliability.Safety also means a relationship based on honestyand competence.

For this reason SABIANA has kept for 80 years aleading position in the production of heating andair conditioning equipment for use in industry,trade and sports.

In 1929 SABIANA was founded by Franco Binaghiand Benvenuto Anatrella and began its activitywith the production of heating appliances. Afterhaving brilliantly overcome the war years and thepost-war period, the company adapted its rangeof products to modern requirements, introduceda modernisation and automation program forworking procedures and dedicated much attentionto its most important product, the unit heater sothat it could become a leader in Europe in thismarket.

In the Seventies SABIANA introduced the radiantstrip, which very soon demonstrated its qualitiesas the most modern and efficient heatingsystem for large areas. The design andproduction technologies, which wereadopted for the radiant strip, assured thatSABIANA became the market leader inEurope for this product.The continuous updating of the productrange has progressed with the introductionof the fan-coils, cassettes and air handlingunits, which satisfy all the needs of airtreatment, and of the stainless steel flues.

With eighty years of experience and itshigh reliability SABIANA stands up forits principal purpose: to guarantee toengineers and customers the security of a safe product and of a trustful relationship with the supplier.Thanks to this philosophy SABIANA is prepared to accept the challenges of the coming years.

Sabiana manufacturing plant in Corbetta

ualities

The new Sabiana 2 manufacturing plant in Magentafor the production of Fan Coils and Cassettes

Sabiana take part to the Eurovent programof fan coil performance certification. The official figures are publishedin the web site www.eurovent-certification.com andin the web site www.certiflash.com.

page 34

page 32

page 1page 2page 4page 5page 6page 6page 7page 7page 8page 8page 9page 9page 9page 10

InoxSabiana 25/50 - FluesInoxMono Sabiana - Flues

Duck Vap - Vacuum Steam Systems

Pulsar - Radiant PanelsDuck-Strip - Radiant PanelsAtlas - Unit HeatersHelios - Unit HeatersAtlas STP - Door Curtain UnitsAIX - Stainless Steel Unit HeaterJetstream - Induction Flow OptimizersNo-Strat - Antistratification UnitsMeltemi - Door CurtainsEnergy - Heat Recovery UnitsElectra 90 and Electramatic - Electric Unit HeatersFSE - Electric Fan ConvectorsPrimula - Fan ConvectorsComfort - Circular Unit Heaters

page 11page 12page 13page 14page 15page 16page 17page 18page 19page 19page 20

page 21

page 21page 22page 22page 23page 24page 25page 26page 27page 28page 29page 30page 31

Polaris - Air ConditionersElegant - Air ConditionersJanus 05 - Air ConditionersKrio - ChillersMistral - High Wall Fan CoilsFreeSabiana - Wireless Control SystemCarisma - Fan Coil UnitsCarisma Serie CRC - Fan Coil Units with centrifugal fanCarisma Serie CRT - Fan Coil Units with tangential fanCarisma Serie CRR - Fan Coil Units with tangential fanCarisma ECM - Fan Coil Units with inverter boardCarisma Serie CRC–ECM - Fan Coil Units with centrifugal fan and inverter boardCarisma Serie CRT–ECM - Fan Coil Units with tangential fan and inverter boardCrystall - Electronic FilterCrystall Flex System - Electronic FilterMaestro - High Pressure Fan Coil UnitsCarisma Serie CRS - High Pressure Fan Coil UnitsCarisma Serie CRS–ECM - High Pressure Fan Coil Units with inverter boardSkyStar - Cassette Fan CoilsSkyStar ECM - Cassette Fan Coils with inverter boardCoanda - One Way Cassette Fan CoilsOcean - Modular Fan Coil UnitsZeus - Air Handling UnitsVulcan Pro - Air Handling Units

HEATING

AIR CONDITIONING

GAS UNITS

FLUES

The descriptions and illustrations provided in this publication are not binding: Sabiana reserves the right, whilstmaintaining the essential characteristics of the types described and illustrated, to make, at any time, without therequirement to promptly update this piece of literature, any changes that it considers useful for the purpose ofimprovement or for any other manufacturing or commercial requirements.

1112131415

5358636974

9099108117127

71798693100

122134146158171

W/m W/m2Without insulation

W/m W/m2With insulation∆TM

°C

COOLING EMISSION

5678910

222832384347

384755647381

303743505764

5263748698110

W/m W/m2Without insulation

W/m W/m2With insulation∆TM

°C

COOLING EMISSION

∆tm = difference between the mean water temperature and the room temperature.

29282726252423222120

160153147141134128122116110104

∆TM

°CEMISSION

W/m39383736353433323130

225218211205198192185179172166

∆TM

°CEMISSION

W/m49484746454443424140

292285279272265258251245238231

∆TM

°CEMISSION

W/m59585756555453525150

362355348341334327320313306299

∆TM

°CEMISSION

W/m69686766656463626160

434427419412405398391383376369

∆TM

°CEMISSION

W/m79787776757473727170

507500492485478470463456448441

∆TM

°CEMISSION

W/m89888786858483828180

582574567559552544537529522515

∆TM

°CEMISSION

W/m

∆tm = difference between the mean water temperature and the room temperature.The emission of the Sabiana Pulsar radiant panels have been certified by the laboratory at the University of Stuttgart H.L.K.applying the harmonised European Standard EN 14037, with the report Nr. DC205 D12.2108

The SABIANA radiant panels can be described as thehygienic heating and cooling system par excellence. Thesystem does not create noise nor movement of air andtherefore dust. In addition, it avoids annoying streams ofair and the circulation of germs, dust and smeels and thusrepresents an important contribution to the prevention ofallergies and illnesses. This result is achieved with the bestdesign: the visible side is perfectly smooth, adapting to any

type of architecture and none of the peripheral walls are affected by the installation as thePULSAR radiant panel can be perfectly integrated into all types of false ceiling. Given its modulardimensions and the design of the water connections, the PULSAR panels can be installed insequence with ceiling lights, in complete compliance with the regulations on artificial lighting.The design of the PULSAR panel allows it to be installed in any building, including hospitalsand clinics. Indeed, its completely smooth visible surface allows sanitisation by spraying forcombating nosocomial illnesses in hospitals. The PULSAR radiant panels are inaccessible tothe people in the room. Therefore there is no risk of burning or electric shock in schools andparamedical environments and no risk of vandalism. In summer, the PULSAR panel can beused for cooling without creating streams of air and with a uniform temperature throughoutthe environment.

1

ConstructionPULSAR:The radiant panelsare made up of steel panel,1mm thick, on whichis fitted an oblong-shapedcopper pipe.The lengths of 1.20, 1.80,2.40 and 3.00 m ensureoptimum integration into600 x 600 mm modularceilings.As standard, the panelsare supplied in RAL 9016colour, with a satinfinish created byan epoxy-polyester coatdried at 180°C.Other RAL colours arealso available on request.

Radiant PanelsPulsar

Thermal emission in accordance to the European Standard EN 14037

Cooling emission in accordance to the european standard EN 14240

13.820.727.634.5

Weight (kg)

1195179523952995

Length (mm)

Pulsar P.1 Pulsar P.2 Pulsar P.3 Pulsar P.4

Description

Dimensions and Weight

ConstructionDUCK-STRIP:The radiant panels consistof three main components:the reflecting panel, thetubes and the insulation.We have panels with 2 tubesor 3 tubes to provide avariation of output, theseare then formed into widthsof 30 cm, 60 cm, 90 cm,120 cm, to provide a variationin coverage. The strip isprovided in modular lengthsof 4 or 6 metres thusaccomodating a total stripto the nearest 2 metres.The strip is suppliedwith 3 sections to make upa complete strip, first,intermediate and final. Thefirst and final include headersand each section is connectedto the one before it.The DUCK STRIP panels arecompletely painted in lightGREY, RAL 9002 or in WHITE,RAL 9016 with epoxy-polyesterpowder dried at 180°C.Model: standard for hotwater and special for hightemperature hot water.

On request:• Special version for steam.• Special lenghts.

Radiant Panels Duck-Strip

2

Heating by radiation means absolute silence, no air movement,a constant temperature in the whole room and no danger offire.This implies energy savings, since the radiation directly heatsthe people, the walls, the floor and only indirectly the airso that the phenomena of heat stratification is reduced to aminimum.Radiant strips are the ideal solution for the heating of industrial,commercial and sports environments.

1) Connection2) Ø 3/8 bsp connection (for drain valve)3) Ø 3/8 bsp connection (for air vent)4) Header5) Ø 1/2 diameter tube

6) Radiant panel7) Strengthening section and hanging bracket8) Mineral wool insulation9) Edging strip10) Retaining clip

11) Side reflecting skirt (optional)12) Retaining clip for side reflecting skirt13) Belled end for welding14) Make-up joint15) Make-up joint between panel and header (optional)

Modular LengthModular Width

12001100

12900800

09600500

06300200

03LA

MODEL

30323436384042444648505254555658606264656668707274767880828486889092949698100102104106108110112114116118120

818793100106112119125132139145152159162165172179186193196200207214221228235242249256263271278285292300307314322329336344351359366374381389396

144155166177189200212223235247259271283289295307319331344350356368381394406419432444457470483496509522535548561575588601614628641655668682695709

2012172332492652812973143303473643803974064154324494664844935015195375555725906086276456636817007187377557747928118308498688879069259449639831002

27029131233335537639842044246448650953154355457760062364665766969271673976378781083485888390793195598010041029105410781103112811531178120312281253127913041330

∆TM(K)

DS 2-03W/m

DS 2-06W/m

DS 2-09W/m

DS 2-12W/m

30323436384042444648505254555658606264656668707274767880828486889092949698100102104106108110112114116118120

95103110118126134141149157165174182190194198207215224232236241249258267275284293302311320329338347356365374383393402411420430439449458468477487

169182195209223237251265279293308323337345352367382397412420427442458473489504520536552568584600616632648664681697714730747763780797813830847864

24526528430432434436538540642744846949150151253455657860061162264466768971273575778080382785087389792094496899210161040106410881112113711611186121012351260

31333836338841343946549151854457159862563965268070773576377779182084887790593496399210211051108011101139116911991229125912901320135113811412144314741505153615671598

∆TM(K)

DS 3-03W/m

DS 3-06W/m

DS 3-09W/m

DS 3-12W/m

∆tm = difference between the mean water temperature and the room temperature

Heating capacitycertified by the leadingEuropean laboratories:The heating capacity valuesdeclared in the literaturehave been certified by theleading European radiantpanel certification laboratory,the University of Stuttgartin Germany. The values havebeen obtained by applyingthe harmonised Europeanstandard EN 14037,approved in 2003.In Europe there are currentlyonly four laboratoriesauthorised to perfomthe tests and issue thecertificates of conformity to the standard.As the standard makesexplicit reference to the EECdirective 89/106 relatingto building products, the CEmark on the productis compulsory by law andthe product can only be soldif certified by one of thefour authorised Europeanlaboratories.

3

Emission for each metre of the different models of the Duck-Strip radiant panelsin compliance of the new EN 14037 STANDARD

Headers and connections

WEIGHT (kg)1R 2R 3R

19

22

26

30

33

38

46

55

65

79

22

25

30

34

40

46

55

66

79

95

24

27

33

38

44

51

61

73

88

106

472

526

580

634

688

742

793

900

1010

1117

336

390

444

498

552

606

657

764

874

980

465

465

465

488

488

513

560

575

595

640

375

429

483

537

591

645

696

803

913

1020

220

220

220

220

220

220

210

210

210

210

130

130

130

130

130

130

140

140

140

140

1 1/4”

1 1/4”

1 1/4”

1 1/4”

1 1/4”

1 1/4”

1 1/2”

1 1/2”

1 1/2”

2”

A B C D E F Ø

1

2

3

4

5

6

7

8

9

10

SIZE

Thanks to its heart Sabiana is a Leader in theSales of Unit Heaters in Europe.The BATTERY of Sabiana Atlas and Helios unitheaters with steel tubes Ø 22 mm and aluminiumfins has the following advantages compared withthe copper-aluminium small diameter tubebatteries used by most of our competitors.The material used for the steel tube, which is verythick (1 mm instead of 0,3 - 0,4 mm), makes theSabiana battery extremely sturdy and long lasting.The tube big diameter reduces the water pressuredrop: this means that reduced power pumps areinstalled and a very rapid heating capacity isprovided.The Sabiana battery for unit heaters uses a reducednumber of tubes to give the same yield: thisdetermines a low resistance to the air flow andconsequently an optimum leaving air temperatureand a very high throw. The greater spacing betweenthe fins as well as their thickness facilitate cleaningand maintenance operations, which is assential tokeep the unit heater efficient.

The steel tube battery is the ideal choice forplants where all tubes and equipment are madeof steel because it avaids physical and chemicalunbalance due to the interaction of differentmetals. The special painting coat makes thebattery long lasting and increases the thermaloutput.The Sabiana battery can be used with hot waterand high temperature hot water with a wotkingpressure up to 16 bar and with steam up to 10bar. As a matter of fact each battery is submittedto two tests at 30 bars. However Sabiana inorder to meet any design and installation needcan offer a complete set of unit heaters withcooper tubes and aluminium fins. This batteryhas the same features (tube diameter, fin pitch,etc.) of the steel battery but it is built withcopper tube 0,7 mm thick, of higher quality andwith a total weight which is double comparedwith the batteries normally used for unit heaters.The wide range of products includes 10 differentsizes with 1, 2 or 3 rows each.

ATLAS-HELIOS heat exchanger

ConstructionATLAS:The main casing ismanufactured from galvanizedprepainted steel finished indove grey, and is assembledfrom three component parts.The standard motor fitted isa hermetically sealed motorwhich is maintenance free.The motor is supplied asstandard for a three phase230/400V 50Hz availablein accordance to the size at4, 6, 8 pole and at 4/8, 4/6,6/8 two speed version.A wide range of air boxesand accessories is available.The heat exchangeris manufactured fromthe highest quality steel orcopper tube. The fins arepressed from aluminiumsheet, bonded onto the tubesfacilitating the maximumtransfer contact available.The fan and motor assembly ismade up of three components:the fan, the motor and thefinger proof guard, whichalso acts as the main support.

On request:Special voltagesand special air boxes.

Unit Heaters

The ATLAS Sabiana Unit Heaters have a big ”heart”: a battery,which has been developed, studied and constructed expresslyfor heating industrial environments.The high thickness of the tubes (1 mm steel tube, 0,7 mmcopper tube), their large diameter (Ø 22 mm) and the excellentratio between the air flow and the output guarantee a longlife and a high environmental comfort.The ATLAS Unit Heaters are produced in 10 sizes from 5 to120 kW and are available with a 1-row battery for steam andhigh temperature hot water installations, a 2-row battery forhot water installations and a 3-row battery for low temperaturehot water installations.

Atlas

4

batterycopper tube

batterysteel tube

rows2

size4

motor6 pole (900 r.p.m.)

rangeAtlas-Helios

6 A-H 4 2 SX SP

-3844-

3842-

3843-

4045-

3943-

3843-

4148-

4248-

4148-

4242

LEAVINGAIR

TEMP.°C

-1117012940

-1560017700

-2385027700

-3084035260

-4060046310

-5178059380

-4420053500

-6290072700

-8140098800

-97800118600

EMISSION

W565656595959616161646464666666696969656565676767686868717171

NOISELEVEL

at 5 m.dB(A)

16701560145023702200210034003300320042503980380056005500540074007200700058005400520085007600700010600100009500125001190011400

LEAVINGAIR

m3/h

MODELREF.

VOLUMEATLAS HELIOS

MOTORSPEED

r.p.m.UNIT

SIZ

E

4 A 11 4 A 12 4 A 13 4 A 21 4 A 22 4 A 23 4 A 31 4 A 32 4 A 33 4 A 41 4 A 42 4 A 43 4 A 51 4 A 52 4 A 53 4 A 61 4 A 62 4 A 63 6 A 71 6 A 72 6 A 73 6 A 81 6 A 82 6 A 83 6 A 91 6 A 92 6 A 93 6 A 101 6 A 102 6 A 103

4 H 11 4 H 12 4 H 13 4 H 21 4 H 22 4 H 23 4 H 31 4 H 32 4 H 33 4 H 41 4 H 42 4 H 43 4 H 51 4 H 52 4 H 53 4 H 61 4 H 62 4 H 63

1400

1400

1400

1400

1400

1400

900

900

900

900

1

2

3

4

5

6

7

8

9

10

-4148-

4146-

4247-

4248-

4348-

4348-

4452-

4552-

4452-

4452

LEAVINGAIR

TEMP.°C

-85009790

-1188013390

-1794020710

-2329026630

-3091035250

-4039046430

-3710043800

-5220059700

-6760081100

-7920097300

EMISSION

W484848515151525252545454565656606060606060616161626262656565

NOISELEVEL

at 5 m.dB(A)

11401040960156014401380223021702100291027202600363035603500479046704550440041003800600055005000800075007000950088008450

LEAVINGAIR

m3/h

MODELREF.

VOLUMEATLAS HELIOS

MOTORSPEED

r.p.m.UNIT

SIZ

E

6 A 11 6 A 12 6 A 13 6 A 21 6 A 22 6 A 23 6 A 31 6 A 32 6 A 33 6 A 41 6 A 42 6 A 43 6 A 51 6 A 52 6 A 53 6 A 61 6 A 62 6 A 63 8 A 71 8 A 72 8 A 73 8 A 81 8 A 82 8 A 83 8 A 91 8 A 92 8 A 93 8 A 101 8 A 102 8 A 103

6 H 11 6 H 12 6 H 13 6 H 21 6 H 22 6 H 23 6 H 31 6 H 32 6 H 33 6 H 41 6 H 42 6 H 43 6 H 51 6 H 52 6 H 53 6 H 61 6 H 62 6 H 63

900

900

900

900

900

900

700

700

700

700

1

2

3

4

5

6

7

8

9

10

21

23

26

32

40

56

25

27

34

42

51

66

29

31

42

52

62

76

WEIGHT (kg)1R 2R 3R

486

540

594

648

702

756

A

330

384

468

492

546

600

B

477

477

477

500

500

525

C

406

460

514

568

622

676

D

1

2

3

4

5

6

SIZE

Example 6A42 SX

The HELIOS unit heaters have been designed to providethe highest standards in an appearance which we feel iscomplimentary in the “90’s”.The Helios Unit with its futuristic polished aluminium andcontoured design is rather special.This smart new concept in commercial heating units willaccommodate all architects who are looking for somethingnew and different. Available in 6 size.

ConstructionHELIOS:The main casing ismanufactured from 4angular diecast aluminiumcomponents and lateralelements made of extruded,anodized aluminiumin a silver colour. The heatexchanger is manufacturedfrom the highest qualitysteel or copper tube.The fins are pressed fromaluminium sheet and bondedonto the tubes facilitatingthe maximum transfercontact available.The fan and motor assemblyconsists of three components:the fan, the motor and thefinger proof guard, whichalso acts as the main support.The standard motor fitted isa hermetically sealed motorwhich is maintenance free.The motor is supplied asstandard for a three phase230/400V 50Hz availablein accordance to the size at4, 6, 8 pole and at 4/8, 4/6,6/8 two speed version.A wide range of air boxesand accessories is available.

On request:Special voltagesand special air boxes.

Unit HeatersHelios

5

Identification code

Performance Data 85/75°C - 80°C Mean water temperature10°C Drop - Entering air temperature 15°C

WATERCONTENTS (l) 1R 2R

WEIGHT(kg)

1R 2R26

33

45

82

30

38

51

92

1.7

2.9

5.3

8.2

2.5

4.2

5.9

12

15

25

32

40

ØN

526

636

743

1011

A

393

501

609

877

B

468

468

468

576

C

506

616

723

991

D

330

497

588

832

E

98

69.5

44.5

89.5

F

66

66

56

87

G

65

85

100

110

ØH

14

14

18

18

ØI

1/2”

1”

1 1/4”

1 1/2”

ØL

95

115

140

150

ØMMODEL

46 I 21-2246 I 41-4246 I 61-6268 I 91-92

The AIX units are available in 4 sizes and 8 models.This units heaters are suitable for low/high temperature hotwater and steam supply.The main casing in stainless steel and the heat exchangeroffer a great resistance in corrosive environment.

Dimensions

1000

1200

1400

E

696

803

913

C

123123123

N°ROWS

62707675869390104113

WEIGHTkg

4.38.212.35.811.116.67.614.521.8

WATERCONTENTS

(l)

793

900

1010

7

8

9

A=BSIZE STP

793

900

1010

D

OUTPUTAND

LEAVING AIRTEMPERATURE

AIRFLOWm3/h

DOORWIDTHL (m)

DOORHEIGHTH (m)

MOTORPOLESIZE STP

8 POLE (700 r.p.m.)6 POLE (900 r.p.m.)

Unit selection Emission - LTHW 85/70°C - EAT +15°C

32.5 kW44°C

43.6 kW44°C

58.7 kW44°C

38.4 kW53°C

50.0 kW53°C

70.4 kW53°C

-

-

-

38.4 kW43°C

52.5 kW41°C

70.7 kW42°C

46.5 kW52°C

60.7 kW48°C

85.7 kW50°C

3200

4200

6000

3 Rows

3500

4700

6400

2 Rows

3700

5100

6800

1 Row

4400

6000

8100

3 Rows

4600

6500

8500

2 Rows

5000

7300

9000

1 Row

-

-

-

7

8

9

789

SIZE STP

1.5

2.0

2.5

1.5

1.8

2.0

3.0 ÷ 4.0

3.5 ÷ 4.5

4.5 ÷ 5.5

2.5 ÷ 3.0

3.0 ÷ 3.5

3.5 ÷ 4.5

6

6

6

8

8

8

7

8

9

7

8

9

6

ConstructionAtlas STP:The main casingis manufactured fromgalvanized prepainted steelfinished in dove grey, andis assembled from threecomponent parts.The standard motor fitted isa hermetically sealed motor which is mainteinance free.The motor is supplied asstandard for a three phase230/400V 50Hz availableat 6 and 8 pole.

The ATLAS Sabiana STP Door Curtain unit with its specialfishtail diffuser is designed to provide a screen of warm airacross the door opening to restrict cold air blowing into thearea and to reduce the heated atmosphere inside the areafrom escaping out.

Atlas STP

AIXStainless Steel Unit Heater

ConstructionAIX:The main casing ismanufactured from AISI 304stainless steel, 1 mm thick.The adjustable louvres areheld firm by spring loadedpivots and they are mountedin horizontal position onthe front part of the unit.The fins are pressed fromaluminium sheet, bondedonto the AISI 304 stainlesssteel tubes facilitating themaximum transfer contact.The AIX units are suppliedwith flanged connections.The standard motor fittedis hermetically sealed motorwhich is maintenance free.The motor is 2 speeds,3 phase, single voltage,400V 50Hz, with klixonthermal protection.

dB(A)mm3/hr.p.m.

ROW

S

SIZE THROWAIR FLOWMOTOR SPEED

STEAM 6 BAR

E.A.T.+15°C

W.T.130/100°C

E.A.T.+15°C

W.T.85/75°C

E.A.T.+15°C

NOISE LEVEL

AT 5m

MODEL

1500

1400

2600

2400

4400

4100

7600

7000

2300

2100

3900

3600

6900

6300

10200

9200

950

950

950

950

950

950

700

700

1350

1350

1350

1350

1350

1350

900

900

51

51

54

54

60

60

62

62

59

59

64

64

69

69

68

68

13.8

-

22.9

-

35.9

-

70

-

16.5

-

27

-

42.7

-

79

-

∆ YkW∆ YkW

∆ YkW

2

2

4

4

6

6

9

9

1

2

1

2

1

2

1

2

-

13

-

21.1

-

36.5

-

59.2

-

10.6

-

17.2

-

29.3

-

51.4

-

18.9

-

30.2

-

53.3

-

84.1

-

15.4

-

24.7

-

43

-

74

46 I 2146 I 2246 I 4146 I 4246 I 6146 I 6268 I 9168 I 92

∆ Y

7.5

7.5

12

12

18

18

21

21

11

11

16

16

25

25

28

28

∆ Y∆ Y∆ Y

Door Curtain Units

The leaving air temperature from the units has a decisiveinfluence on hot air stratification and consequently onenergy saving: for each centigrade degree of increase intemperature there is a 1.5% increase in energy consumption.The use of the induction flow optimizer has the followingadvantages:a) energy saving: - reduced hot air stratification within the building - reduced operating time of the units with the same ambient temperature.Energy saving varies between a minimum of 5% and amaximum of 15%, with maximum assessment in two seasons.b) environment comfort advantages: - increased floor-temperature uniformity with greater comfort area - possibility to install smaller and quieter units, due to the increase of the throw.

ConstructionJETSTREAM:The JETSTREAM inductionflow optimizer is composed of a metal frame whichincorporates a set of specialshaped anodised extrudedaluminium louvres movedby a set of manuallyor motor-controlled levers.The Jetstream induction flowoptimizer can be mountedon the air outlet af all unitheater Sabiana series Heliosor Atlas (up to size 6).This equipment can alsobe installed at a later stageand can be mounted onall previously installed unitheaters.The Jetstream induction flowoptimizer increases the airspeed thanks to the specialshape of its deflectinglouvres which allowthe creation of various layersof hot air at the unit heateroutlets. The depressioncreated between the layersinduces a lateral aspirationof ambient air that mixeswith the air heated bythe unit, thus reducingthe leaving air temperatureand increasing the throw.

Induction Flow Optimizersfor Atlas and HeliosJetstream

7

No-StratThe Sabiana No-Strat is an anti-air-stratification and heatsaving appliance, which can be used on all existing industrialas well as commercial warm air heating applications.As soon as the temperature of the higher zone exceedsthe predetermined value (i.e. 20°C), the electric fan willbe actuated to guide the hot air into the lower part of theroom and to distribute it at the right level for use.

ConstructionNO-STRAT:The casing is manufacturedfrom galvanised prepaintedsteel sheet (1 mm. thick)finished in dove grey.The adjustable louvres areheld firm by spring loadedpivots. The fan assembly ismade up of the aluminiumhelicoidal fan, finger proofsupport and three phase230/400 V electric motorworking at 1400 rpm or 900rpm. A room thermostat ismounted on the unit for theautomatic on/off switchingof the motor in accordancewith the temperature underthe ceiling.

Air flow producedby a unit heater without flow optimizer

Air flow producedby a unit heater equipped with a flow optimizer

634

634

688

688

742

742

900

1010

A

mm

634

634

688

688

742

742

900

1010

B

mm

629

629

683

683

737

737

895

1005

C

mm

537

537

591

591

645

645

803

913

D

mm

488

488

488

488

513

513

575

595

E

mm

61

52

66

56

69

60

67

68

100

60

150

90

200

120

300

400

4 ÷ 7

3 ÷ 6

5 ÷ 9

4 ÷ 8

7 ÷ 12

6 ÷ 10

7 ÷ 15

8 ÷ 18

0.63

0.30

0.63

0.30

0.63

0.30

1.50

1.73

150

75

150

75

150

75

370

550

3500

2500

5500

4000

7500

5200

11000

14000

1400

900

1400

900

1400

900

900

900

NOISELEVELat 4 mdB(A)

SURFACE

m2

INSTALLAT.HEIGHT

m

AMPERE

V 400

MOTOR

W

AIR FLOW

m3/h

SPEED

r.p.m.

MODEL

DNS-450/4

DNS-450/6

DNS-500/4

DNS-500/6

DNS-550/4

DNS-550/6

DNS-650/6

DNS-750/6

Antistratificationand Heat Recovery Units

HOT WATER BATTERY - W Version (Water temperature 80/60°C - Entering air temperature +15°C)

ELECTRIC RESISTANCE - E Version

AMBIENT - A Version

MU-1500E

1900/11606.813.5

MC-1000E

2400/17006.012.0

MC-1500E

3600/23009.018.0

MU-1000E

1250/9004.59.0

Air flow m3/h 1st step emission kW 2nd step emission kW

MODEL

MU-1500W

1700/110011.3/8.7

MC-1000W

2200/152015.5/12.5

MC-1500W

3300/187023.4/17.3

MU-1000W

1150/8507.1/6.4

Air flow m3/h Emission kW

MODEL

MU-1500A

1900/1160

MC-1000A

2400/1700

MC-1500A

3600/2300

MU-1000A

1250/900 Air flow m3/h

MODEL

MC-1500

1570417280

MC-1000

1070417280

2.5 m 4 m

MU-1500

1564300200

MU-1000

1064300200

ABC

MAX HEIGHT

MODEL

ConstructionMELTEMI:• Casing made of galvanized steel with epoxy powder painting.• Two speed 230/400V motor for MU-MC models.• High performance aluminium tangential fans directly coupled to the motor.• For W version, batteries with copper pipes and aluminium fins.• For E version, stainless steel electric resistance for MU models and sealed electric resistances for MC models.

The MELTEMI Sabiana door curtains offer the bestflexibility in the protection of open doorways. Thedoor curtains are available in the air ventilationambient version, with hot water battery and withelectric resistance. The 2 sizes are supplied in 12different models with lengths from 1064 mm to

1570 mm that are suitable for door heights from 2,5 m to4 m in residential, commercial and industrial installations. Thanks to their

modularity, the door curtain units can be connected together to give a continual air barrierof the desidered length to protect doors of big dimension.

Meltemi

Heat Recovery Units

Construction ENERGY:• The structure of the unit is made of galvanised plate sandwich panels, 24 mm thick, filled with high-density polyurethane foam. Size ENY 1, on the other hand, uses both sandwich panels and self-supporting panels insulated with foam material. The side panels are easily removable, allowing the position of the air inlet and outlet to be modified, even on site.• The heat recovery units are static plate exchangers that transfer heat between two flows of air due to the temperature difference. The two flows of hot and cold air entering the heat recovery unit are sub-divided into sections that run between two plates, which carry hot air and cold air alternatively. These sections are sealed to prevent any possible contamination between the air flows. The heat is exchanged by the plates that make up the walls of the sections, with efficiency that reaches values between 50% and 75%.• Condensate collection pan with drain connection on the side.• The discharge and intake air fans are double intake with forward blades. The rotor is directly coupled to the electric motor, reducing the overall size. Single-phase motor, 230 V power supply with built-in motor protection, three speeds on all models.• Pleated cell filters, 48 mm thick, efficiency G3, with filtering media made from regenerable synthetic material, class F1.• Post-heating coil or electric post-heating coil available as optional.• Vertical version unit available.

Energy

Door Curtains

8

The ENERGY ducted units have been designed to allow energysavings in the ventilation systems of public and private environments,such as bars, restaurants, offices, shops, etc., by recovering theheat from the air discharged and trasferring it to the fresh airintroduced into the environment.The heat exchange between the discharged air and the fresh airintroduced occurs via a static cross-flow exchanger, designed to

recover over 50% of the heat.The Energy range features 6 sizes suitable for horizontal installation (1 to 6) and 5 sizes forvertical installation (2 to 6), covering a range of air flows from 400 to 3500 m³/h.

(*) Sound pressure measured in an open field at a distance of 1 metre from the fan outlet

Working static pressure = 50 Pa

Efficiency (-5°C/20°C) Leaving air temperature Efficiency (-5°C/20°C) Leaving air temperature Efficiency (-5°C/20°C) Leaving air temperature

High speed

Medium speed

Low speed

Length (B) Width (A) Height (H) Weight

mmmmmmkg

OUTSIDE DIMENSIONS ENY 1

103083028541

ENY 2

1480100042085

ENY 3

1480100048093

ENY 4

14801000480105

ENY 5

17501310540140

ENY 6

17501310540155

%°C%°C%°C

HEAT RECOVERY UNITS ENY 1

54.6 8.6 55.3 8.8 57.1 9.3

ENY 2

54.2 8.5 55.6 8.9 56.6 9.2

ENY 3

54.5 8.6 56.4 9.1 58.0 9.5

ENY 4

51.9 7.9 53.5 8.4 56.6 9.2

ENY 5

58.2 9.5 60.8 10.2 62.3 10.6

ENY 6

51.1 7.8 53.5 8.4 55.3 8.8

Air flow Sound pressure (*) Air flow Sound pressure (*) Air flow Sound pressure (*)

High speed

Medium speed

Low speed

m3/hdB(A)m3/hdB(A)m3/hdB(A)

MODEL ENY 1

620 54 535 52 365 49

ENY 2

1200 56 940 52 780 49

ENY 3

1450 58 1080 53 840 48

ENY 4

2150 62 1690 58 1040 51

ENY 5

2500 60 1630 58 1270 48

ENY 6

3800 64 2800 60 2230 56

MAIN TECHNICAL CHARACTERISTICS

360001200024000340047123.05.00.5890012050

300001200018000350042123.05.00.5890012050

24000600018000360036123.05.00.5890012050

166505550111001800448

3.04.50.409005048

11100555055501800358

3.04.50.409005048

9720324064801000446

2.54.00.409005043

Emission Step

Air flowL.A.T. (e.w.t. +15°C)

Throw Mounting heights

Helicoidal fan motor 400V 50Hz

Noise level at 5 m

6480324032401000336

2.54.00.409005043

Watt1st W2nd Wm3/h°Cm

Min mMax m

Ar.p.m.

WdB(A)

-36E

-30E

EM2424E

EM1717E

EM1111E

EM909E

EM606E

EM606E

EM909E

EM1111E

EM1717E

EM2424E

-30E

-36E

Length (mm) Height (mm) Fan ØELECTRAMATIC Weight (kg)ELECTRA 90 Weight (kg)

ELECTRAMATIC

ELECTRA 90 MODEL

5704703003230

5704703003533

6505704004341

6505704004543

7306705006058

730670500-

61

730670500-

64

ELECTRAMATIC

ELECTRA 90 MODEL

The sound pressure levels apply to the reverberant field of a 1003 room and a reverberation time of 0,5 sec.

13.0

10991420

10.0

10991420

9.5

8841205

7.0

669990

5.0

454775

20.0

669990

13.5

454775

400 V~ (3P+N)230 V~FSE 4FSE 3FSE 2FSE 1FSE 2FSE 1

Speed Air flow Emission Fan max Sound pressure B L

m3/hkWA

Lw dB(A)mmmm

MODEL

1650-

39

28005.60

47

310008.50

50

1650-

39

28005.00

47

310007.50

50

1380-

26

24804.00

33

36006.00

42

1290-

33

23602.90

38

34504.50

43

1190-

31

22401.90

36

33003.0

41

1290-

33

23602.90

38

34504.50

43

1190-

31

22401.90

36

33003.00

41

FSE 5

The ELECTRA electrical unit heaters for hot air horizontaldischarge are available in 7 sizes, with outputs from 6 to36 kW.The Sabiana ELECTRAMATIC offers a new concept in electricunit heaters as they include all the automatic controlsand overheat protections making the unit functionallyindependent.The control panel is integral in the unit, fully automaticand need only to be connected to the eletrical supply andif desired to the thermostat. Outputs from 6 to 24 kW.

Construction ELECTRA 90and ELECTRAMATIC:Outer casing: made of steelfinished in a oven driedgrey powder paint.Electric heat exchanger:is made using a tungstonelement hermetically sealedinside a steel tube woundwith spiral fins.Electric motor: three phase,400V 50Hz, single speed900 r.p.m. The unit includesinternal thermostaticprotection and terminal boardfor the electrical connections.

Electra 90and Electramatic

FSEThe FSE electrical fan convectors are designed to providecontrollable heat for residential and commercial buildings.Available in 5 sizes from 3 kW to 8.5 kW with integralelectric board with protection and safety relays, the FSEjoins safety and aestheticalappearance in a highquality product.

Electric Fan Convectors

Electric Unit Heaters

Construction FSE:• Electrical resistance: three phase 400V (all sizes) or single phase 230V (sizes 1 and 2 only).• Outer casting: made from sheet steel prepainted and easily removeable for acces to the unit.• Fan and motor assembly: the fans are dynamically and statically balanced during manufacture in order to have an extremely quiet unit. The motor is wired for single phase and has three speeds.• Electrical heat exchanger: is made using a tugnston element hermetically sealed inside a finned steel tube.• Control panel: include all the automatic controls and protections with the room thermostat and the terminal boards.

PrimulaThe PRIMULA Mini Vectors are designed to providecontrollable heat at smaller outputs for residential andcommercial buildings. Available in 4 sizes (1100-3600 Watt)for hot water and low temperature hot water; also availablewith electric resistance battery.

Fan Convectors ConstructionPRIMULA:The cabinet is manufacturedfrom heavy gauge steelsheet, finished in a mostattractive oven dried greypaint, RAL 7038.The two speed single phasemotor drives a staticallyand dynamically balancedtwin aluminium tangentialfan assembly.The heat exchanger ismade from drawn coppertube mechanically fittedto aluminium fins.

9

SD MODEL WITH HOT WATER BATTERY - PE MODEL WITH ELECTRIC BATTERY

10141621101416

5607609601160560760960

----

700/10001000/15001000/2000

1400198030253605

---

120170260310---

41160255215---

1130162024453025

---

97140210260---

30135170150---

0.150.250.400.60

---

7010015020070100150

120170260320120170260

(A)WEIGHT

(kg)OUTPUT

(W)OUTPUT

(W)WATER FLOW

(l/h)∆p DROP

(mm/H2O)OUTPUT

(W)WATER FLOW

(l/h)∆p DROP

(mm/H2O)

WATER 80/70°C (SD Mod.) (PE Mod.)WATER 70/60°C (SD Mod.)WATER

CONTENTS

(l)MIN

SPEED

AIR FLOW (m3/h)

MAX

SPEED

MODEL

10 SD15 SD25 SD30 SD10 PE15 PE20 PE

WATER CONTENT (l)

1.201.301.902.403.204.305.205.905.906.50

WEIGHT (kg)

313642525875859597106

A B C C1 F G O P Q R S Ø DN

68078078088088010801080108010801080

180180280280380380455555555605

430430530530630630705805815865

560560660700760870945104510551105

380380480480580580655755765815

460560560660660760760760760760

331331431435535539614714714765

61270270280280210051005100510051005

62626268688080808080

350421421491491755755755755755

350421421491491440440440440440

1 1/4”

1 1/4”

1 1/4”

1 1/2”

1 1/2”

2”2”2”2”2”

25252532324040404040

0123456789

SIZE

L.A.T.

°C

EMISSION

WMODEL

NOISE LEVELat 5 mdB(A)

MOTORSPEEDr.p.m.

SIZEAIR

FLOWm3/h

39

39

39

39

39

39

43

42

41

40

41

40

40

42

44

44

24.400

28.400

41.800

48.800

64.400

79.200

19.100

22.100

32.700

38.000

50.200

61.500

77.800

92.000

107.000

115.100

4Z-007

4Z-107

4Z-211

4Z-311

4Z-415

4Z-515

6Z-007

6Z-107

6Z-211

6Z-311

6Z-415

6Z-515

6Z-618

6Z-722

6Z-822

6Z-924

56

60

63

65

66

73

48

52

54

55

56

63

64

65

65

66

3.000

3.400

5.100

6.000

7.800

9.700

2.000

2.400

3.700

4.400

5.700

7.100

9.000

9.900

11.000

12.000

900

1400

0123450123456789

Dimensions, weight and water content

ConstructionCOMFORT:The casing is made of spunsteel on both top andbottom sections whichis designed to give greaterstrength and quieteroperation. The casingis then phosphatised andfinished with an epoxy,polyester powder coatingof light grey, RAL 9002.These top and bottomsections are assembled bymeans of threaded tie-rods,thus enabling the unitto be rapidly dismantledfor maintenance etc.The circular heat exchanger of the COMFORT SabianaUnit Heater is constructedof copper tubes withaluminium fins.Standard motors arethree phase, closed frame,flange mounted, pre-greasedbearings. COMFORT Sabianaunits are supplied asstandard with three phasemotors 230/400 V availableat 4 pole, 6 pole, 4/6 pole,4/8 pole, 6/8 pole.

Circular Unit Heaters

For all factory premises, either commercial or industrial, theefficient COMFORT Sabiana vertical discharge Circular UnitHeater offers a pratical and economical solution for spaceheating. They are available in nine sizes for hot water, hightemperature hot water and steam.

Comfort

Technical table:EMISSION LTHW 85/75°C,

10°C DROP, ENTERING AIR TEMPERATURE 15°CRadiallouvre “DRA”

Is the model mostcommonly used;made of eight

separately adjustablelarge louvres, shapedso as to be able

to cover the whole ofthe outlet area and therefore adaptable forminimum to maximum heights.This diffuser allows the air to be directedmore easily to the areas where it is requiredmost, or conversely, if you do not require airto one particular corner you can close downone, two or three vanes and restrictthe distribution.

Two waydiffuser “T2”

It is designedto give a twoway or corridordistribution,

suitable for corridoror gangway areas,

between storage racksetc., generally mounted at any heightdependant upon the length of corridor required.

R

laso

Tw

sor

10

Ø

1 1/4”

1 1/4”

1 1/4”

1 1/2”

1 1/2”

2”2”2”2”2”

DN

25252532324040404040

A B C C1

68078078088088010801080108010801080

180180280280380380455555555605

430430530530630630705805815865

560560660700760870945104510551105

WEIGHT (kg)

313642525875859597106

WATER CONTENT (l)

1.201.301.902.403.204.305.205.905.906.50

0123456789

SIZE

The POLARIS Air Conditioners for vertical discharge offera practical and economical solution for space heating andcooling with hot water supply or chilled water supply.

Construction POLARIS:The casing is made of spunsteel on both top and bottomsections which is designedto give greater strengthand quieter operation. Thecasing is then phosphatisedand finished with an epoxy,polyester powder coating,in light grey, RAL 9002.The lower casing is also thecondensate collection tray withappropriate drain connection.These top and bottomsections are assembled bymeans of threaded tie-rods,thus enabling the unitto be rapidly dismantledfor maintenance etc.The POLARIS circular heatexchanger is constructed ofcopper tubes with aluminiumfins. Standard motors arethree phase, closed frame,flange mountedwith pre-greased bearings.Polaris units are supplied asstandard with three phasemotors 400V, 6/8 pole.

Polaris Air Conditioners


47

46

44

44

44

44

44

46

48

47

41

40

39

38

39

39

38

40

43

42

900 r.p.m. 700 r.p.m.

15.1

17.4

25.8

30.0

39.6

48.5

61.4

72.7

84.5

90.7

17.6

20.4

30.3

35.3

46.7

57.1

72.2

85.6

99.5

106.7

900 r.p.m. 700 r.p.m.

2.7

3.5

5.4

6.6

9.5

11.9

15.0

16.5

19.0

20.6

3.1

4.0

6.2

7.5

10.9

13.6

17.2

18.9

22.0

23.7

900 r.p.m. 700 r.p.m.

COOLING: R.H. 55%E.A.T. 28°C

L.T.H.W. 11/15°CSIZE

0123456789

1.400

1.680

2.600

3.080

4.000

4.970

6.300

6.930

7.700

8.400

2.000

2.400

3.700

4.400

5.700

7.100

9.000

9.900

11.000

12.000

46

49

51

52

53

60

61

63

60

61

48

52

54

55

56

65

66

68

65

66

900 r.p.m. 700 r.p.m.

NOISE LEVEL at 5 m

dB(A)

900 r.p.m. 700 r.p.m.

AIR FLOW

m3/h

HEATING:L.T.H.W. 85/70°C - E.A.T. 15°C

kW L.A.T. °C

11

TECHNICAL CHARACTERISTICS MODEL

High speed Medium speed Low speed

High speed Medium speed Low speed

Emission High speed Medium speed Low speed

Emission High speed Medium speed Low speed

230V - 50Hz

27.123.420.3

9.88.57.5

5000400031005853494001.78

24.320.318.3

8.37.06.2

4300280022005649432751.35

20.817.915.7

7.36.45.7

3000230019005348422211.14

13.911.910.1

4.43.83.2

1650125010004943371020.52.5

17.715.212.8

6.15.34.3

2200170013005248411961.02.5

15.613.712.2

---

5300430034005853494001.78

14.012.010.8

---

4500300024005649432751.35

11.910.69.5

---

3200250021005348422211.14

10.39.18.1

---

2350185014505248411961.02.5

8.37.36.6

---

1750135011004943371020.52.5

RE11 RE21 RE31 RE41 RE51 RE12PE12

RE22PE22

RE32PE32

RE42PE42

RE52PE52

Noise level at 4 m

Air flow

Cooling

HeatingkWkWkW

kWkWkW

m3/hm3/hm3/hdB(A)dB(A)dB(A)

WAμF

Electric motor IP 44

3.53.84.04.55.0

3.53.54.04.55.0

m R = m

MAXHEIGHT

SURFACE

2.52.63.03.53.8

3.03.03.54.04.5

m R = m

MAXHEIGHT

SURFACE

kgmmWEIGHTA X A

600750750830830

2631323839

MODEL

E1E2E3E4E5

HIGH SPEED LOW SPEED

HEATING Entering air temperature: + 20°C Water temperature: + 70/60°C

ConstructionELEGANT:The casing is made of spunsteel on both top andbottom sections whichis designed to give greaterstrength and quieteroperation. The casingis then phosphatised andfinished with an epoxy,polyester powder coating,in white, RAL 9010.The lower casing is also thecondensate collection traywith appropriate condensatepump on PE models.The ELEGANT circular heatexchanger is constructedof copper tubeswith aluminium fins.Standard motorsare with closed frame,IP 44 protection, F class,3 speeds, 230V - 1Ph - 50Hzsupply.

ElegantAir Conditioners

The ELEGANT air conditioners are suitable for heating andcooling of low height environments like shops, bars, work-

shops, supermarkets, etc. They are for ceiling mountingwith central air inlet and four lateral discharges.

oThe coo

Notes:Battery working pressure: 10 barBattery testing pressure: 22 bar

The performance figures refer to the following working conditions:

COOLING Entering air temperature: + 27°C d.b. / + 19°C w.b. - R.H. 46% Water temperature: + 7/12°C

Dimensions

12

526

634

742

1010

390

498

605

874

475

400

525

650

A B C

1”

1”

1”

11/2”

376

476

576

818

78

76

83

90

71

83

83

100

D E F1 F2

58

58

58

67

L

1.9

2.9

4.3

8.4

23

30

40

75

WEIGHT (kg) WATER CONTENT (l)MODEL

46 F 23/24

46 F 43/44

68 F 63/64

68 F 93/94

SPEED AIR FLOW AIR THROWNOISE LEVEL

AT 5 mMOUNTING

HEIGHT

WATER TEMPERATURE

85/75°C - ∆t 10°CE.A.T. +15°C

WATER TEMPERATURE 11/15°C - ∆t 4°CE.A.T. +28°C

R.H. 55%

WATER TEMPERATURE

45/40°C - ∆t 5°CE.A.T. +15°C

WATER TEMPERATURE 7/12°C - ∆t 5°CE.A.T. +28°C

R.H. 55%MODEL

46F23

46F24

46F43

46F44

68F63

68F64

68F93

68F94

COOLING HEATING

L.A.T.°C kW TOTAL

L.A.T.°CkW

L.A.T.°CkWkW SENSIBLEkW TOTALdB(A)mm3/hr.p.m.m

L.A.T.°CkW SENSIBLE

-19.9

-17.9

-19.8

-17.5

-19.4

-17.2

-19.1

-17.0

-3.7-

4.4-

6.4-

7.5-

9.8-

11.3-

17.6-

20.0

44.849.552.857.544.249.252.358.248.451.256.960.149.853.257.461.9

20.416.123.318.534.526.939.729.646.340.352.044.089.575.9103.682.0

27.129.030.432.326.929.030.332.728.729.932.233.629.230.632.334.2

8.36.69.57.514.111.016.212.119.016.621.418.236.531.042.333.6

-3.6-

4.2-

6.2-

6.9-

9.2-

10.2-

16.9-

18.4

-5.3-

6.3-

9.1-

10.6-

13.8-

15.9-

25.0-

28.2

59515951645464546052605266606660

117.5107161214101814171326202418

2200150020001400380025003400215043503600400031508250625078005950

1350950135095013509501350950900700900700900700900700

-21.1

-19.6

-21.1

-19.2

-20.8

-19.0

-20.5

-18.8

-3.1-

3.5-

5.2-

5.8-

7.7-

8.5-

14.2-

15.4

2.5 - 4

2.5 - 4

3 - 4.5

3 - 4.5

3 - 5

3 - 5

3.5 - 5.5

3.5 - 5.5

ConstructionJANUS 05:The main casingis manufactured fromgalvanized prepainted steelfinished in dove grey,and is assembled fromthree component parts.The condensate collectiontray must is fittedin the unit.The standard motor fittedis a hermetically sealedmotor which is maintenancefree. The motorsare 2 speeds, 3 phase,single voltage, 400V 50Hz,with klixon thermalprotection.The heat exchangeris manufactured fromthe highest quality coppertube. The fins are pressedfrom aluminium sheet,bonded onto the tubesfacilitating the maximumtransfer contact.The fan and motor assemblyis made up of threecomponents: the fan,the motor and the fingerproof guard, which alsoacts as the main support.

Janus 05 Air Conditioners

The Sabiana JANUS 05 air conditioner provides a simple solutionto centralised Air Conditioning systems offering the followingadvantages: • simple installation • low equipment cost • lowuser runnig cost • flexibility in installation and project design• minamum space is required for the units not taking up valuablefloor space, this type of unit also dispenses with expensive andcumbersome duct work systems. The Sabiana JANUS 05 rangeof air conditioners can be matched to the Sabiana Krio rangeof indoor and outdoor chillers and heat pumps.


13

-74,8--

73,081,6

-57,0--

55,363,7

-50,5--

49,056,1

-43,0--

42,348,0

-37,1--

36,442,4

-15,4--

14,616,8

-13,2--

12,614,4

11,011,410,412,410,812,8

8,68,78,210,08,29,7

6,97,06,68,16,78,0

5,65,65,46,55,36,4

4,9-4,65,7--

-159--

154173

-138--

137153

-121--

119135

-109--

107122

-97,9--

94,9107

-86,5--

84,194,6

Three phase KS T.C.H.

Single phase KS M.C.H.

Air to water monoblock CHILLERS and HEAT PUMPS with helicoidal fans

Single phaseThree phaseThree phase

KS M.E.R.KS T.E.R.

KS T.E.R.S.

Three phase KS T.E.H.

Single phase KS M.E.H.

CoolingCoolingCoolingCoolingHeatingCoolingHeating

Type Model Emission

-38,138,1--

37,742,9

040-

32,9---

31,335,5

032-

26,4---

25,128,8

026-

21,9---

20,823,6

022-

19,3---

18,421,0

019-

15,4---

14,616,8

015-

13,2---

12,614,4

01211,011,4-

10,412,410,812,8

0108,68,7-

8,210,08,29,7

0086,97,0-

6,68,16,78,0

0075,65,6-

5,46,55,36,4

0064,9--

4,65,7--

005-

145145--

138157

145-

127127--

120136

130-

112112--

107121

115-

96,996,9--

93,9105

100-

86,886,8--

82,593,5

085-

76,076,0--

72,081,0

075-

57,057,0--

57,565,2

060-

50,550,5--

47,954,2

050-

45,145,1--

42,848,1

045-

159159--

151173

160Size

Air to water monoblock CHILLERS and HEAT PUMPS with centrifugal fans

Single phaseThree phase

KS M.C.R.KS T.C.R.

CoolingCoolingCoolingHeatingCoolingHeating

Type Model Emission075060050045040015012010008007006005 160145130115100085

Size

ConstructionKRIOSABIANA:• Air to water Chillers and Heat pumps with Ecological Gas R410a and scroll compressors.• With helicoidal fans for external installation.• With centrifugal fans for internal installation.

The range KRIO Chillers and Heat Pumps offers:1) Maximum efficiency: due to the high mechanical output of the compressors and the optimum sizing of the components of the cooling circuit we achieve high performances and low consumptions.2) Reduced noise levels: this is possible due to the electronic regulator controlling the speed of the ventilators and thanks to the optimum sizing of scroll compressors.3) High resistance against corrosion: the casing consists of galvanized prepainted steel or peraluman with stainless steel screws.4) Limited dimensions for installation in small spaces.5) Simple installation: on request a complete hydraulic kit can be supplied for all sizes.

KrioChillers

COOLING Entering air temperature 35°C Entering/Leaving cooler water temperature +7/12°C

Operating conditions:

HEATING Entering air temperature +7°C Leaving cooler water temperature 45°C

14

4362.151.822.7010.09.02445363329

6322.802.483.6016.015.02852433330

7804.003.404.9037.035.04055464339

9204.703.605.8046.044.05060514744

MI / MI-IR 1 MI /MI-IR 2 MI /MI-IR 3 MI /MI-IR 4m3/hkWkWkWkPakPaW

dB(A)dB(A)*dB(A)*dB(A)*

MODEL Air flow Cooling total emission Cooling sensible emission Heating∆p Cooling∆p Heating Fan Sound power Lw Sound pressure Lp (High speed) Sound pressure Lp (Medium speed) Sound pressure Lp (Low speed)

4501.701.282.3820.019.05053443832

6503.202.404.5138.036.56059504338

MI-IR-V 2 MI-IR-V 4m3/hkWkWkWkPakPaW

dB(A)dB(A)*dB(A)*dB(A)*

MODEL Air flow Cooling total emission Cooling sensible emission Heating∆p Cooling∆p Heating Fan Sound power Lw Sound pressure Lp (High speed) Sound pressure Lp (Medium speed) Sound pressure Lp (Low speed)

* The sound pressure levels are 9 dB(A) lower than the sound power levels and apply to the reverberant field of a 100 m3 room and a reverberation time of 0.5 sec.

MODELS WITHOUT VALVE (VALVE ON REQUEST)

MODELS WITH FITTED VALVE

ConstructionMISTRAL:• Cabinet: made from a strong plastic structure with exceptional mechanical characteristics and excellent resistance to ageing.• Fan assembly and electric motor: tangential fan with three-speed 230V ~ motor, ensuring high efficiency and minimal noise levels.• Heat exchange coil: made from copper tubes and aluminium fins; the coil has two 12 mm diameter copper pipe fittings.• Available with wall mounted control (MI units), with infra-red remote control (MI-IR units) and with infra-red remote control and 3 way fitted valves (MI-IR-V units).

Mistral High Wall Fan Coils

Technical characteristics

The Sabiana MISTRAL high wall fan coil harmonoiuslycombine the need of performance, silence, ease ofinstallation and simple maintenance.The MISTRAL are manufactured in: • 4 models for wired wall controls • 4 models with IR infra-red remote control • 2 models with 3 way fitted valves

and with IR infra-red remote control. For hot water supply and chilled water supply.

T

www.eurovent-certification.comwww.certiflash.com

15

101013131113

845845920920845920

270270298298270298

180180200200180200

MI /MI-IR 1 MI /MI-IR 2 MI /MI-IR 3 MI /MI-IR 4 MI-IR-V 2 MI-IR-V 4

MODEL WEIGHT

kgW

mmH

mmD

mm

DW

H

COOLING (summer mode)Entering air temperature + 27°C b.s., R.H. 47%Water temperature + 7/12°C

Figures at high speed

HEATING (winter mode)Entering air temperature + 20°CEntering water temperature + 50°CWater flow rate as for the cooling conditions

2-pipe units. The following standard rating conditions are used:

Control unit with support

Probe with support

Power unit

Maincomponents:• A remote control which features a button panel and LCD display and can be wall-mounted or positioned on a dedicated table support. It enables the control of all the operating variables of the fan coil units in different configurations. The control is battery powered. The temperature and the operating speed of the fan coil unit are set with two large buttons featuring user friendly graphics.• A power unit to be installed on the fan coil (fan coil interface). It controls the fan and the valves of the fan coil. The power unit is connected to the electric supply. The power unit receives the information required to control the fan coil both from the remote control and locally, such as the temperature of the coil.• A room temperature probe, which can be wallmounted or positioned on a dedicated table support. It is a battery powered device, able to measure the air temperature in the spot where it is positioned, generating temperature information which is communicated to the other devices.

FreeSabianaWireless Control System

Free Sabiana is an innovative, fully wireless,electronic system for use with fan coil units,based on radio communication.

This technology provides installation flexibilityand a more accurate measurement of the roomtemperature. The probe can be moved until themost suitable position is found, without the worry

of changes in the environment layout and of itsfurniture and also without mounting it on a wall. If a new fan coil unit is added, noelectrical wiring for the control system is required: just define the control unit andthe probe which regulates it. The improved measurement accuracy derives from thepossibility to position the probe near the typical location of the user: this enables tokeep the temperature exactly at the required value with more energy savings comparedwith a traditional measurement system.

Transmission is based on communication protocol IEE802.15.4, the most suitable wayto transmit a relatively low amount of information with very low consumption andhigh reliability.

The system has been certified by a leading independent body, officially recognized bythe EU authorities and its sale has been authorized in all the EU and EFTA countries.

Feb

mof

16

Carisma is the result of a greatcommitment of energy andresources, with the aim ofoffering an innovative productin terms of design, performance,low noise, energy saving andfunctionality.

Upon request, innovativeelectronic motors with extremelylow energy consumption, controlledby an inverter board and identifiedby ECM, are available with centrifugal andtangential fan. The ECM motors allow to decreaseelectric consumption by more than 50% compared totraditional asynchronous motors. They enable to control the airflow continuously and the ambient temperature with precision, withfurther benefits in terms of very low noise levels thanks to the reduced averageworking speed.

The 4 models (for wall and ceiling installation, with casing and concealed) and thedifferent available coils (with three or four rows for two pipe systems, one or two rowsfor four pipe systems) offer great installation flexibility and allow the use of lowtemperature hot water, in line with the development of modern boilers and heat pumps.

As a special option, the Carisma range can be fitted with a patented electronic filterfeaturing a class D rating according to Standard UNI 11254, with similar performancesto the initial ones of a traditional mechanical filter featuring a class F9 rating accordingto Standard UNI EN 779.

A full range of adjustment and control devices is available including the innovativepatented wire-less system, for rapidly obtaining correct environmental temperature andwith an investment proportional to performances, comfort and desired measurementprecision.

The Carisma model is complemented with a full range of accessories: various types of adjustmentvalves, sturdy support feet, rear covering panel for glass installation, additional electric heater,auxiliary condensate pump, fresh air intake louver, air inlet/outlet diffusers for fitted installations.

THE ULTRA QUIET FAN COIL

Electric andelectronic controls:All the controlsto be fitted on the unitof the new range havebeen totally re-designedand feature a modernand attractive design.An innovative patentedwireless control systemcalled FreeSabianaallows adjusting the roomtemperature with highprecision and highinstallation flexibility.

Carisma Fan Coil Units

djutrist

ustmentic heater,tallations.

t

ydifieifuallthaTh

ent temperature with precision, with

edugal andow to decreasean 50% compared tohey enable to control the airt t t ith i i ith Eurovent Certification

Sabiana obtainedthe Eurovent certification

in 1996. Euroventis an independent body

recognized in all Europe thatensures total reliability and

transparency of performances.


17

Air flow Cooling total emission Cooling sensible emission Heating∆p Cooling∆p Heating Fan Sound power Lw (Medium speed) Sound pressure Lp (High speed) Sound pressure Lp (Medium speed) Sound pressure Lp (Low speed)

CRC MODEL15007.606.0510.0823.219.317658554941

CRC 942201.230.971.555.64.73339363023

CRC 142951.811.382.2013.911.63240383121

CRC 243852.571.903.0711.59.24240403127

CRC 344853.122.343.7615.512.24439383024

CRC 446504.093.074.8331.325.76141393222

CRC 547604.793.605.8836.229.37846433728

CRC 649255.584.236.7127.723.710351474233

CRC 7412006.475.068.4317.514.513056514736

CRC 8415006.745.559.0624.620.917658554941

CRC 932201.030.861.392.32.03339363023

m3/hkWkWkWkPakPaW

dB(A)*dB(A)*dB(A)*dB(A)*

CRC 132951.561.242.026.55.53240383121

CRC 233852.391.802.9219.716.74140403127

CRC 334852.872.193.5627.223.14439383024

CRC 436503.642.824.5016.213.86141393222

CRC 537604.093.205.0919.816.87846433728

CRC 639255.113.956.2734.229.110351474233

CRC 7312005.824.687.6619.016.213056514736

CRC 83

COOLING Entering air temperature + 27°C d.b., + 19°C w.b.(summer mode) Water temperature + 7/12°C


CarismaSabiana CRC. 2 pipes unit. The following standard rating conditions are used:


HEATING Entering air temperature + 20°C(winter mode) Entering water temperature + 50°C Water flow rate as for the cooling conditions

Carisma CRCFan Coil Units with centrifugal fan• 9 sizes: from 220 to 1500 m3/h

• 1 battery: 3 or 4 rows

• 2 batteries: 3 or 4 rows (cooling) and 1 or 2 rows (heating)

• 5 versions: MV, MO-MVB, IV-IO

The ultra quiet fan coilThe CRC range is offered with standard 6 speed motors,3 of which connected and one static, useful up to50 Pa. It is the ideal choice for all those applicationswhere wanting to optimise price/performance ratio,though guaranteeing excellent acoustic result,contained electric consumption and a design suitable

for every modern architectural solution.c archite

630

A B

100

A

530

B

A

511

D G

G

D

MV MODEL

MO-MVB MODEL

IV-IO MODEL Vertical installation

IV-IO MODEL Horizontal installation

374474689689904904111911191119

218218218218218218218248248

123456789

225225225225225225225255255

67077098598512001200141514151415

123456789

G DSIZE

IV - IO

A BSIZE

MV - MO - MVB


18

• 6 sizes: from 90 to 945 m3/h

• 1 battery: 3 rows

• 2 batteries: 3 rows (cooling) and 1 row (heating)


• 4 sizes: from 110 to 500 m3/h


• 1 version: MV

Carisma CRT Fan Coil Units with tangential fan

Fan Coil Units with tangential fanCarisma CRR

2501.301.011.6020.016.52739363025

3601.901.532.607.87.03139363025

5002.802.053.6020.018.83640373125

1800.800.701.2011.07.02837332825

CRR 1 CRR 2 CRR 3 CRR 4m3/hkWkWkWkPakPaW



CRR MODELL 770 985 1200670

CRR 1 CRR 2 CRR 3 CRR 4MOD.


2501.240.991.664.13.31935342622

3702.041.562.5515.212.52336352722

4952.762.123.479.98.13339342822

6353.332.614.2613.811.44443413427

7804.183.235.2725.119.85343413427

2000.870.741.241.81.51736352722

CRT 23 CRT 33 CRT 53 CRT 63 CRT 73CRT 13m3/hkWkWkWkPakPaW



CRT MODEL

Low energy consumption tangential fanThe CRT range uses a 6 speed ventilating unit withextremely reduced electric consumptions. The large tangential fan (120 mm) supplies a consistent air flowwith sound pressure values at medium speed which arebelow 35 dB(A)* and at minimum speed below 28 dB(A)*on all models.Long laboratory tests have enabled obtaining a verystable and regular functioning in time, also in critical

conditions, like in situations where the filter and the batteryhave not been regularly cleaned.

The motor, with newly conceived bearings, is guaranteed for double the number ofhours compared to the previous range and stays at a particularly low functioning

temperature, even after many days of continuous functioning. It is the ideal choice for all large installations with maximum attention to consumptionsand environmental sound levels.

High comfort for small environmentsThe series CRR is designed to be equipped with a tangentialfan and the units are of smaller dimensions for smallerenvironments (depth 18 cm). Carisma is the ideal equipmentfor offices and houses, is no longer a simple technical productbut also a furnishing element that can give added value tothe aesthetics of the surrondigs.



CarismaSabiana CRR. 2 pipes unit. The following standard rating conditions are used:





CarismaSabiana CRT. 2 pipes unit. The following standard rating conditions are used:


ptemperature even after m

dgc

conhave not been reg

The motor, with newly chours compared to the

OOLING Entering air temperature 27°C d

unit. CarismaSabiana CRR. 2 pipes u

630

L 183

100

19

The ECM range makes use of the excellentexperience gained with the Cassette fancoils with inverter board, first in the worldin production since 2009, and which ishaving great success on all markets.

The innovative brushless and sensorlesstype synchronous electronic motor withpermanent magnets, is controlled by aninverter board designed and developed inItaly. The board is mounted on the unit, closedto the motor, without the need to be cooled down bythe air flow.

The air flow rate can be varied in continuous by means of a 1-10 Vsignal generated by Sabiana controls or by independent control systems. Thecontinuous air flow control improves the acoustic comfort and allows a more punctualreply to the variation of the thermal loads and a greater stability of the requestedambient temperature.

The extreme efficiency, also at low speed, makes possible a great reduction in electricconsumption (less than 50% in comparison to CRC and CRT range motor) with absorption values under normal operatingconditions that do not exceed 16 Watt for CRC−ECM models and do not exceed 8 Watt for CRT−ECM models on theentire range. The excellent values of the CRC and CRT range in terms of sound levels have been maintained in allworking conditions, without any resonance phenomenon at any frequency.

The full compliance with the Electromagnetic Compatibility Directive and with the othersevere Standards in force is certified by an independent institute.

This is the right choice for all buildings designed for achieving the highest energy class.

Carisma ECMwith inverter boardFan Coil Units

ncloled

uous by means of a 1-10 V

osedd down by

b f V

630

A B

100

A

530

B

A

511

D GG

D

MV MODEL

MO-MVB MODEL

IV-IO MODEL Vertical installation

IV-IO MODEL Horizontal installation

37447468968990490411191119

218218218218218218218248

12345679

225225225225225225225255

6707709859851200120014151415

12345679

G DSIZE

IV - IO

A BSIZE

MV - MO - MVB


IR–ECMelectronic board

CB–T–ECM control

CR–T–ECM control

20

Carisma CRC–ECM

Carisma CRT–ECM

CRC–ECM version:• 5 sizes: from 115 to 1395 m3/h

• 1 battery: 3 or 4 rows

• 2 batteries: 3 or 4 rows (cooling) and 1 or 2 rows (heating)


Electronic motor:three phase permanentmagnet brushless electronicmotor that is controlledwith current reconstructedaccording to a BLACsinusoidal wave.The inverter boardthat controls the motoroperation is powered by230 Volt, single-phase and,with a switching system,it generates a three-phasefrequency modulated,wave form power supply.The electric power supplyrequired for the machineis therefore single-phasewith voltage of 230-240Vand frequency of 50-60Hz.

fan and inverter boardFan Coil Units with tangential


The following standard rating conditions are used:

10MAX2400.990.861.482.21.810.04.039393020

10MAX6753.492.744.6315.012.126.06.046443726

10MAX4502.381.853.1219.716.016.05.042403324

10MAX3051.411.151.965.24.211.54.543403424

10MAX9004.673.656.0629.124.038.07.048473928

CRT–ECM 13 CRT–ECM 53CRT–ECM 33CRT–ECM 23 Inverter PowerSpeed Air flow Cooling total emission Cooling sensible emission Heating∆p Cooling∆p Heating Fan (High speed) Fan (Low speed) Sound power Lw (Medium speed) Sound pressure Lp (High speed) Sound pressure Lp (Medium speed) Sound pressure Lp (Low speed)

MODEL

m3/hkWkWkWkPakPaWW


CRT–ECM 73



10MAX3251.881.442.3714.812.620.57.041423221

10MAX5053.192.413.9116.113.525.06.542423321

10MAX7204.543.415.633

26.932.07.544453524

10MAX8755.344.036.5125.621

41.09.048483928

10MAX13657.145.639.3920.817

99.016.055554635

CRC 24 CRC 74CRC 64CRC 44 CRC 9410

MAX3301.611.32.136.95.720.57.041423221

10MAX8904.983.846.0932.626.841.09.048483928

10MAX7353.993.114.9519

15.732.07.544453524

10MAX5152.972.283.7428.923.925.06.542423321

10MAX13956.365.28.6922.218.599.016.055554635

CRC 23 CRC 73CRC 63CRC 43 Inverter PowerSpeed Air flow Cooling total emission Cooling sensible emission Heating∆p Cooling∆p Heating Fan (High speed) Fan (Low speed) Sound power Lw (Medium speed) Sound pressure Lp (High speed) Sound pressure Lp (Medium speed) Sound pressure Lp (Low speed)

ECM MODEL

m3/hkWkWkWkPakPaWW


CRC 93

ef d iFan Coil Units with

f d i

ed:

fan and inve

Carisma Sabiana CRT–ECM. 2 pipes unit.

Carisma Sabiana CRC–ECM. 2 pipes unit. CRT–ECM version:• 5 sizes: from 95 to 900 m3/h


• 2 batteries: 3 rows (cooling) and 1 row (heating)


fan and inverter boardFan Coil Units with centrifugal







21

Crystall Flex System is an innovative electronic filtersystem that can be easily installed downstream of thefan coils designed for horizontal concealed installation.The system minimizes the indoor diffusion of varioustypes of polluting agents found in the ducts of air

conditioning systems. The system is intended for a variety of environments such as schools, hospitalsand care homes, surgeries, hotels and all other places where indoor air quality can and should beimproved.The Crystall Flex System is an efficient, reliable and user-friendly product.Its running costs are extremely low: it does not need to be replaced and can be cleaned and sanitizedusing commonplace detergents without fear of compromising efficiency and durability.The filter unit can also be fitted on existing systems without need for significant alterations.

oco

Meeting room

Recreation areas

Industrial areas

Hospitals

Schools

Shops

Offices

12.6

12.6

18

12.6

9

9

9

63

63

63

63

45

45

36

MINIMUM AMOUNT OF EXTERNAL AIR

WITH FILTRATION PLANT (NO SMOKERS)IN m3/h PER PERSON

TYPE OF AREA

100% EXTERNAL AIR VENTILATION

(WITH SMOKERS)IN m3/h PER PERSON

DIMENSIONS (IN MICRONS) OF AIR BOURNE PARTICLES

50 20 10 5 2 1 0,5 0,2 0,1 0,05 0,02 0,01 0,005

CIGARETTE SMOKE

DUST

BACTERIA

SMOKE

POLLEN

EFFICIENCY OF THE CRYSTALL ELECTROSTATIC FILTER

Operating principle of the Crystall Sabiana electronic filter

The air is sucked in and first passes a mechanical prefilter,which keeps away particles of more than 50 μm (dust, insects, etc.)

(Phase 1).

Then the smallest particles (50÷0.01 μm) are exposedto an intensive ionic fleld and are polarized (Phase 2).

The charged particles passing through the second filter section,are pushed back by the anode and attracted to the collection

surfaces by a strong, inducted magnetic field (Phase 3).

The air which leaves the unit is free from polluting particles.

OUTLETOF CLEAN AIR

INLETOF POLLUTED AIR

PHASE3

PHASE2

PHASE 1

Collectionsurface

Inductedanode

Polarizedelectrode

Ionic field

Eliminationof the biggestparticles

Air withoutparticles < 1 μm

Air withoutparticles ≥ 50 μmPre-filter

Electrostaticfilter

The CRYSTALL SABIANA electrostatic air filter improves the airquality of any room. The filter which is fitted to a Carisma fanconvector can remove particles even smaller then 0.01 micron. Itis more than 90% efficient and has a very low power cosumption.

Energy saving example.• Meetings Rooms.• With 6 people present.• Some of whom are smokers.• Fresh air intake according to ASHRAE 6x63=378 m3/h• If the fresh air is taken through the CRYSTALL electrostatic filter the air that has to be introduced from outside is only 6x12,6=75,6 m3/h.

The CRYSTALL electronic filter matches the need for betterair conditioning with the concepts of space and design.With this filter the various stages of air treatment arecombined in one appliance.Thanks to this new patented filter, air pollutants such ascigarette smoke, dust, pollen and most biological organismsare eliminated.In addition, as fresh air is not being introduced to obtainthe best climatic conditions, there areconsequential energy savings.

External air flow recommendedaccording to ASHRAE standard 62-1981

for area ventilation

Heating, cooling,heating + purification,

cooling + purification, purification

Crystall

Crystall Flex System

Electronic Filter

Electronic Filter

ConstructionCRYSTALL:The CRYSTALL Sabianaelectrostatic filter is builtof extruded profilesin aluminium alloy andhas got a very resistantstructure.It takes up practicallyno valuable room space.It fits neatly intothe bottom of the fan coilswhich only means thatthe casing has to be raisedslightly.The positioning of the filterallows for easy and efficientmaintenance.It can be cleanedvery easily under runningwater and has an almostunlimited life.The constructionof the unit using the fanconvector instead of havingits own inbuilt fan makesit extremely competitivelypriced when compared toseparately mounted filters.When the heating or coolingsystems are switched off,the unit can still be usedjust as an air purifier.

ConstructionCRYSTALL FLEX SYSTEM:The system consists of:• a duct of adjustable length;• a Femec active electronic plate filter;• an electronic filter control device;• a high voltage cable;• a double louvre grid.

22

185035

4.543.596.414.33.612553554446

2100550

5.064.077.255.24.416057594850

3118060

5.594.588.136.25.320562635354

181035

4.393.453.974.08.612553554446

295550

4.893.914.404.810.316057594850

3112060

5.424.414.755.811.920562635354

Speed Air flow Available pressure Cooling total emission Cooling sensible emission Heating∆p Cooling∆p Heating

Fan Sound power level outlet Sound power level inlet + radiated Sound pressure level outlet Sound pressure level inlet + radiated Plenum code

Speed Air flow Available pressure Cooling total emission Cooling sensible emission Heating∆p Cooling∆p Heating

Fan Sound power level outlet Sound power level inlet + radiated Sound pressure level outlet Sound pressure level inlet + radiated Plenum code

9034200 9034200 9034220 9034230 9034240

1245035

13.4910.4518.59.58.068063675458

2300050

15.3912.1521.5412.010.282069726063

3336560

16.5313.2123.413.811.796072756366

1172035

10.087.6513.49.88.344060645155

2214050

11.679.0315.912.710.750064675558

3250060

12.8910.1317.9115.312.958067695860

1161535

8.816.8212

13.311.334059625053

2182550

9.537.4613.215.413.039063655456

3213060

10.58.3614.818.315.546065685659

1125535

6.795.289.349.98.324061635254

2139050

7.265.7110.1111.29.426063665457

3151560

7.656.0710.712.210.329066695760

m3/hPakWkWkWkPakPaW

dB(A)dB(A)dB(A)*dB(A)*

MT 54MT 14 MT 24 MT 34 MT 44MODEL

9034200 9034200 9034220 9034230 9034240

1233035

13.0410.0511.259.017.968063675458

2285050

14.8911.7012.7211.422.482069726063

3320060

16.0112.7213.3613.024.496072756366

1163535

9.727.368.259.217.244060645155

2203550

11.288.699.4612.122.150064675558

3237560

12.489.7510.3614.525.958067695860

1153535

8.526.567.0212.611.634059625053

2173550

9.227.197.5414.613.139063655456

3202360

10.188.058.1017.414.946065685659

1119035

6.565.085.579.317.324061635254

2132550

7.025.495.9210.519.326063665457

3143560

7.415.846.2111.621.029066695760

m3/hPakWkWkWkPakPaW

dB(A)dB(A)dB(A)*dB(A)*

MT 54 + 1MT 14 + 1 MT 24 + 1 MT 34 + 1 MT 44 + 1MODEL

ConstructionMAESTRO:The casing consistsof self-supporting panelsof hot dip galvanized steel,which are completelyinsulated with a 3 mm thickthermoacoustic,flame retardant lining.The fan section consistsof centrifugal fansin galvanized steelwith one or two impellersand a directly coupled,single phase, three speedmotor, 230V/50 Hz.The heat exchangeris constructed in 3/8” diaexpanded copper tubeswith aluminium finswith a pitch of 2.1 mm.The heat exchangeris mounted in a galvanizedsteel carrying frame.The coils are suppliedwith 3 or 4 rowsand with 1 or 2 rowsfor the additional coil.

High Pressure Fan Coil UnitsMaestro



MT 1MOD.1113698310

MT 21113698310

MT 31113698360

MT 41445853360

MT 51445853435

ABC







HEATING Entering air temperature + 20°C(winter mode) Entering water temperature + 70/60°C

The MAESTRO Fan Coil Units are for concealed installation and connection to a duct

system.They supply a consistent air flow withstatic pressure up to 160 Pa.The MAESTRO Fan Coil Units aremanufactured in 5 sizes for hot watersupply and chilled water supply.

MA The M

23

CRS 1431060

2.121.572.587.96.66350574148

9066363

CRS 2454060

3.592.684.3821.918.011051574248

9069222

CRS 3493065

5.494.257.0812.910.619057634854

9066368

CRS 44120060

7.375.629.3915.515.121058644955

9069224

CRS 1331060

1.911.452.3812.810.76350574148

9066363

CRS 2354060

3.242.493.9712.810.511051574248

9069222

CRS 3393065

5.094.036.5814.612.319057634854

9066368

CRS 43120060

7.055.478.8412.210.321058644955

9069224

Air flow Available pressure Cooling total emission Cooling sensible emission Heating∆p Cooling∆p Heating

Fan Sound power outlet Sound power inlet + radiated Sound pressure outlet Sound pressure inlet + radiated Plenum code

m3/hPakWkWkWkPakPaW


CRS MODEL

G

D

511




CarismaSabiana CRS. 2 pipes unit. The following standard rating conditions are used:


The Fan Coil Units are for concealed installation andconnection to a small duct system.

They supply a consistent air flow with staticpressure up to 80 Pa.The Fan Coil Units are manufactured in4 sizes for hot water supply and chilledwater supply.

High Pressure Fan Coil Units Carisma CRSConstructionCRS:• Casing: made from galvanized steel with closed cell insulation.• Fan assembly: the fans have aluminium or plastic material blades directly keyed on the motor with double aspiration and they are dynamically and statically balanced during manufacture in order to have an extremely quiet operation.• Electric motor: the motor is wired for single phase and has five speeds with always-on capacitor. The motor is fitted on sealed for life bearings and is secured on anti-vibration and self-lubricating mountings. Internal thermal protection with automatic reset, protection IP 20, class B.• Heat exchange coil: it is manufactured from drawn copper tube and the aluminium fins are mechanically bonded onto the tube by an expansion process. The main coil and the eventual additional coil have two 1/2 inch BSP internal connections. The coils are supplied with 3 or 4 rows and with 1 or 2 rows for the additional coil.


68990411191570

218248248248

SIZE

1234

DG


24

CRS–ECM 139

32565

1.981.512.4813.711.3432452584349

9066363

CRS–ECM 238

56065

3.332.574.1013.411.1643052584349

9069222

CRS–ECM 33 CRS–ECM 14 CRS–ECM 24 CRS–ECM 348.595065

5.164.106.6815.012.31025056634754

9066368

932565

2.191.642.698.57.0432452584349

9066363

856065

3.702.774.5323.019.0643052584349

9069222

8.595065

5.584.327.2113.310.91025056634754

9066368

Inverter Power Air flow Available pressure Cooling total emission Cooling sensible emission Heating∆p Cooling∆p Heating

Fan (High speed) Fan (Low speed) Sound power outlet Sound power inlet + radiated Sound pressure outlet Sound pressure inlet + radiated Plenum code

m3/hPakWkWkWkPakPaWW


MODEL

G

D

511

ConstructionCRS–ECM:• Casing: made from galvanized steel with closed cell insulation.• Fan assembly: the fans have aluminium or plastic material blades directly keyed on the motor with double aspiration and they are dynamically and statically balanced during manufacture in order to have an extremely quiet operation.• Electronic motor: three phase permanent magnet brushless electronic motor that is controlled with current reconstructed according to a BLAC sinusoidal wave. The inverter board that controls the motor operation is powered by 230 Volt, single-phase and, with a switching system, it generates a three-phase frequency modulated, wave form power supply. The electric power supply required for the machine is therefore single-phase with voltage of 230-240V and frequency of 50-60Hz.• Heat exchange coil: it is manufactured from drawn copper tube and the aluminium fins are mechanically bonded onto the tube by an expansion process. The main coil and the eventual additional coil have two 1/2 inch BSP internal connections. The coils are supplied with 3 or 4 rows and with 1 or 2 rows for the additional coil.

Carisma CRS–ECM with inverter boardHigh Pressure Fan Coils Units


Carisma Sabiana CRS–ECM. 2 pipes unit. The following standard rating conditions are used:

The innovative brushless and sensorless type synchronouselectronic motor with permanent magnets, is

controlled by an inverter board designed anddeveloped in Italy.

The air flow rate can be varied incontinuous by means of a 1-10 V signalgenerated by Sabiana controls or byindependent control systems. Thecontinuous air flow control improves the

acoustic comfort and allows a more punctualreply to the variation of the thermal loads and a greater

stability of the requested ambient temperature.

The extreme efficiency, also at low speed, makes possiblea great reduction in electric consumption.

The Fan Coil Units are for concealed installation andconnection to a small duct system.

They supply a consistent air flow with static pressure up to 80 Pa.The Fan Coil Units are manufactured in 3 sizes for hot water supply and chilled water supply.


6899041119

218248248

SIZE

123

DG





25

2-PIPE UNITS 4-PIPE UNITS

11406.344.6918.99.1021.44839312477

0.36

15007.715.8326.911.0029.9534431251200.53

15008.776.4925.08.5615.3534431251200.53

18208.896.8434.712.7038.8584939251700.74

182010.207.6832.09.8019.5584939251700.74

5202.701.988.83.4610.84536312444

0.20

7103.342.5613.44.4016.65344362468

0.32

7103.932.9510.53.359.05344362468

0.32

8803.812.9717.04.9520.55950403290

0.45

8804.533.4614.03.7911.05950403290

0.45575x575x275 820x820x303

5202.682.049.73.358.24536312444

0.20

7104.333.1815.15.2311.45344362468

0.32

8805.023.7419.76.1717.75950403290

0.45

11406.164.5921.67.7715.14839312477

0.36

15009.516.4826.910.7123.0534431251200.53

182011.108.2535.614.0030.6584939251700.74

6102.331.9013.53.0314.54940312457

0.27

6101.981.6410.02.649.04940312457

0.27820x820x303575x575x275

SK 04 SK 14 SK 24 SK 26 SK 34 SK 36 SK 44 SK 54 SK 56 SK 64 SK 66SK 02 SK 12 SK 22 SK 32 SK 42 SK 52 SK 62

Air flow Cooling total emission Cooling sensible emission∆p Cooling Heating∆p Heating Sound power Sound pressure (High speed) Sound pressure (Medium speed) Sound pressure (Low speed)

Dimensions

Fan

m3/hkWkWkPakWkPa


WA

mm

MODEL



COOLING (summer mode)Entering air temperature + 27°C d.b., + 19°C w.b.Water temperature + 7/12°C

HEATING (winter mode)Entering air temperature + 20°CWater temperature + 50°CWater flow rate as for the cooling conditions

The attractive design and the high quality of all the componentsallow the SkyStar cassette fan coil to perfectly fit in all the

enviroments, offering the quietest operational mode.The 4 smaller sizes are designed to fit into false ceilingstandard 600x600mm modules. The 3 bigger sizes have a

800x800mm dimension that offers the best solution interms of silent operation and price/performance ratio

for these high capacity units. The SkyStar range offersgreat installation flexibility and very easy maintenance.

The acces to all the most important components is from thebottom side without the need to remove any parts of the falseceiling. Every unit can have fresh air intake, the air distributionis in four directions and a remote air diffuser can be connectedto the unit. The condensate pump is integral with the unit andis easiliy accessible. The range is made of 6 sizes. Every size can

be supplied with 2 or 4 pipes and with 2 or 3 way 230 V, ON-OFF valves. The valve installationis mandatory. Different electronic remote controls are available. The TCS-DI model with micro-processor automatically selects the fan speed in accordance to the difference between room andset temperature and can control up to 10 units. The infra-red remote control is also available.



2-pipe units


HEATING (winter mode)Entering air temperature + 20°CWater temperature + 70/60°C

4-pipe units

SkyStarCassette Fan CoilsConstructionSKYSTAR:• Air inlet and air diffuser: internal grid, air diffuser and louvres are made of synthetic material of white color (RAL 9003).Other RAL coloursavailable on request.• Internal casing: made of galvanized steel with thermal and acoustic polyethylene insulation, fire-retardant rating B2 to DIN 4102.• Fan assembly: extremely quiet radial flow fan with self-lubrificating ball bearings. External rotor motor 230V / 50Hz, class 1 insulation, with integrated thermal contact for motor protection, wired to the terminal on the outside of the casing.• Condensate collection tray: polystyrene foam condensate tray, shaped in order to optimize the air diffusion, fire retardant rating B2 to DIN 4102.• Air filter: synthetic washable filter, class G1 (EN 779) easily removable.• Condensate pump: two step float switch, integral with the unit and wired to the terminal on the outside of the casing, 650 mm maximum head.• Valve set: two or three way valves, ON-OFF operation with thermostatic actuator.


great ins

ctw tenThsta

fot

The attracallow

eTs

t i

26

ConstructionSKYSTAR ECM:• Fan assembly: extremely quiet radial flow fan with self-lubrificating ball bearings.• Three phase permanent magnet brushless electronic motor that is controlled with current reconstructed according to a BLAC sinusoidal wave. The inverter board that controls the motor operation is powered by 230 Volt, single-phase and, with a switching system, it generates a three-phase frequency modulated, wave form power supply. The electric power supply required for the machine is therefore single-phase with voltage of 230-240V and frequency of 50-60Hz.

SkyStar ECM


Condensate pump absorption: 8 W* The sound pressure levels are 9 dB(A) lower than the sound power levels and apply to the reverberant field of a 100 m3 room and a reverberation time of 0.5 sec.


HEATING (winter mode)Entering air temperature + 20°CWater temperature + 50°CWater flow rate as for the cooling conditions

The SkyStar ECM series uses an innovative brushless synchronouspermanent magnet electric motor controlled by an inverter

card that is directly installed on the unit.The air flow can be varied continuously by means ofa 1-10 V signal generated by Sabiana controls or by

independent contollers. In the first case, an electronicboard installed on the unit interfaces with specifically

developed wall-mounted or infra-red controls, whereasin the second case programmable controllers should be used with

a 1-10 V output.The extreme efficiency, also at a low speed, makes possiblea great reduction in electric consumption (more than 75%less in comparison to a traditional motor) with absorptionvalues, under normal operating conditions, that are no greaterthan 10 Watt in the entire range.

The brushless motor is characterised by a constantsynchronous speed, independently of the applied load,that depends only on the motor power supply frequency,which is modulated by the inverter.It consumes less because:• The motor always works at its point of maximum efficiency.• In the brushless motor, the rotor’s permanent magnets generate the magnetising power autonomously.• The motor always operates at the synchronous speed, as a result there are no induced currents that reduce efficiency.

The main advantages are:• Large reduction in energy consumption, thanks to an optimal response to the thermal load of the environment during every moment of the day.• Operating silence at all rotation speeds.• Ability to operate at any rotation speed.



2-pipe units


HEATING (winter mode)Entering air temperature + 20°CWater temperature + 70/60°C

4-pipe units

5352,772,089,53,6211,74738302416

7103,932,9510,53,35

95445342431

8804,533,4613,13,79116051412862

11656,514,8319,89,3622,54839302433

17709,877,430,19,511857483825108

5352,752,0910,13,448,74738302416

7104,333,1815,15,2413,15445342431

8805,023,7419,76,217,76051412862

11656,334,7222,78,0119,54839302433

177010,757,9433,612,7328,857483825108

820x820x303575x575x275 575x575x275 820x820x303

SK-ECM 14SK-ECM 12 SK-ECM 26SK-ECM 22 SK-ECM 36SK-ECM 32 SK-ECM 44SK-ECM 42 SK-ECM 56SK-ECM 52

Air flow Cooling total emission Cooling sensible emission∆p Cooling Heating∆p Heating Sound power Sound pressure (High speed) Sound pressure (Medium speed) Sound pressure (Low speed) Fan

Dimensions

2-PIPE UNITS 4-PIPE UNITS

m3/hkWkWkPakWkPa


Wmm

MODEL

MOTOR ABSORPTION

= SK = SK-ECM

Cassette Fan Coilswith inverter board


in the se

tarmancaTha

de

The SkyStperm

cTa

i th

27

2801.741.312.1012.910.74941433226

CCN 143802.571.883.1212.110.24436392724

CCN 246204.022.984.7715.512.67252464332

CCN 342801.501.181.936.14.94941433226

CCN 133802.371.772.867.66.34436392724

CCN 235403.342.514.0216.213.45946433726

CCN 33 Air flow Cooling total emission Cooling sensible emission Heating∆p Cooling∆p Heating Fan Sound power Lw (Medium speed) Sound pressure Lp (High speed) Sound pressure Lp (Medium speed) Sound pressure Lp (Low speed)

COANDA MODELm3/hkWkWkWkPakPaW


CCN–ECM 14 CCN–ECM 24 CCN–ECM 34CCN–ECM 13 CCN–ECM 23 CCN–ECM 33 Inverter PowerSpeed Air flow Cooling total emission Cooling sensible emission Heating∆p Cooling∆p Heating Fan (High speed) Fan (Low speed) Sound power Lw (Medium speed) Sound pressure Lp (High speed) Sound pressure Lp (Medium speed) Sound pressure Lp (Low speed)

COANDA–ECM MODEL

m3/hkWkWkWkPakPaWW


10MAX2951.811.382.2013.911.629846463726

10MAX5403.502.604.3220.817.137846473725

10MAX6204.022.984.7815.513.0421048493927

10MAX2951.561.242.026.55.329846463726

10MAX5403.162.413.8512.610.437846473725

10MAX6203.752.834.5419.816.6421048493927

Thanks to the particular air handling section, CarismaCoanda cassette units generate an airflow with a “coanda”effect.

The unit is suitable for installation in a suspendedceiling.Air intake is from the bottom while the air supplyis parallel to the ceiling, through practical andfunctional intake and outlet grids.

The “coanda” effect creates excellent circulationof the air inside the room.

Available with ECM innovative brushless electronicmotor controlled by an inverter board designed and

developed in Italy for great saving of electric energy.

592

309

A100

s t.

ilAis fu

m

ThanksCoandaeffect

The ceiAisf

m

One Way Cassette Fan CoilsConstructionCOANDA:• Diffuser with intake grill: in prepainted metal sheet in RAL 9003 colour with intake grill that can be opened for inspection and maintenance of the filter.• Casing: made from galvanized steel with closed cell insulation.• Fan assembly: the centrifugal fans have aluminium or plastic blades directly keyed on the electric motor with six speeds, three of which are connected, 230V/1/ 50Hz.• Heat exchange coil: made from copper tubes (3/8”) and aluminium fins on a galvanized steel frame. The coils are supplied with 3 or 4 rows and with 1 or 2 rows for the additional coil.

• ECM motor: three phase permanent magnet brushless electronic motor that is controlled with current reconstructed according to a BLAC sinusoidal wave. The inverter board that controls the motor operation is powered by 230 Volt, single-phase and, with a switching system, it generates a three-phase frequency modulated, wave form power supply. The electric power supply required for the machine is therefore single-phase with voltage of 230-240V and frequency of 50-60Hz.

Coanda


5929701192

SIZE

123

A





CarismaSabiana COANDA. 2 pipes unit. The following standard rating conditions are used:




CarismaSabiana COANDA–ECM. 2 pipes unit. The following standard rating conditions are used:


28

Speed Air flow Cooling total emission Cooling sensible emission Heating∆p Cooling∆p Heating Sound pressure Fan max

MODEL 4321

6.04.42.82.0

1240015.009.9030.207.05.355

2380020.3014.0043.2013.110.061

3530024.8017.7055.1013.115.465

115009.806.5018.309.06.953

2210012.208.5023.8014.511.056

3300015.2011.0032.0024.318.561

110005.804.1012.202.62.050

215507.905.8017.604.83.755

321009.607.3022.407.45.660

16003.702.607.402.21.645

210005.203.7011.404.63.551

314006.404.7015.007.55.755

m3/hkWkWkWkPakPa

dB(A)*A

A B C D W Z ELECTROSTATICFILTER N°

ELECTROSTATICFILTER

2344

335415515515

300380480480

65404040

195300400400

8058058051355

9509509501500

840x112840x112840x1121390x112

MOD.1234

ConstructionOCEAN:The casing consistsof self-supporting panelsof hot dip galvanized,prepainted steel, which arecompletely insulated with a20 mm thick thermoacoustic,flame retardant lining.The fan sectionconsists of centrifugal fansin galvanized steel with twoimpellers and a directlycoupled, single phase, threespeed motor, 230V/50Hzwith permanently installedcondensor, insulationclass F, power 185 W.The heat exchangeris constructed in 3/8” diaexpanded copper tubeswith aluminium finswith a pitch of 2.1 mm.The steel headers have3/4” male connectionsand an extra tappingfor an air vent.The heat exchangeris mounted in a galvanizedsteel carrying frame.

Modular Fan Coil UnitsOcean Available with Crystall

electrostatic filter sectionThe Ocean Modular Fan Coil Units are constructedin four basic versions in order to satisfy anyinstallation requirements and thanks to theircompact size they can fit in narrow areas orfalse ceilings.

By the use of the same modular components, 6 vertical and 9 horizontal versions can be obtained with airflows ranging from 600 to 5300 m3/h.It is possible to mount either 2, 3, 4 or 6 row heat exchangers for water, or a 4 row heatexchanger for direct expansion.Thanks to its modular construction the unit can be easily disassembled and re-assembled onsite and the air flow direction can be changed according to the specific needs.

Accessories:• Suspension Brackets• Condensate collection tray• Humidification section• Supplementary electric element• Recessed manual speed control switch• Variable speed drive• Manual speed control and thermostat• Outlet box with circular diffusers• Inlet box with damper• Outlet grid with double louvres

With 4 row battery

* Sound pressure in open field conditions at 1 metre from front of unit.

COOLING (summer mode)Entering air temperature + 26°C b.s., R.H. 55%Water temperature + 7/12°C

HEATING (winter mode)Entering air temperature + 20°CEntering water temperature + 70/60°C



OCEAN dimensions Crystall electrostatic filter + Carbon filter

29

WATER

FLOW

l/h

LEAVING AIR

TEMPERATURE

°C

EMISSION

kWROWS

AIR FLOW

m3/h

32.3542.3749.7754.3871.2283.6676.1399.70117.1298.93129.05151.28142.40186.88219.08171.61226.34263.21

41.948.653.641.948.653.641.948.653.641.247.552.741.147.552.741.347.752.8

282837044350475362267312665587161023686881131713266125061638919211150711984923082

234234234234234234

4400

7400

10400

14000

20200

24500

50

80

110

140

200

250

MODELWATER

FLOW

l/h

SENSIBLE

EMISSION

kW

TOTAL

EMISSION

kWROWS

AIR FLOW

m3/h

17.0420.8226.6828.9335.5245.4739.9850.4663.8554.4072.1092.5078.78104.41133.95101.58126.45160.94

14.0016.4019.3623.7727.9833.0032.8539.3646.0141.6051.1062.7060.2474.0090.8075.5089.62109.09

293135812656497661097821687686801098293331236415830135161791322982174282169527612

346346346346346346

4400

7400

10400

14000

20200

24500

50

80

110

140

200

250

MODEL

Ø HEADERS

2R 3R 4R 6R1 1/4”

1 1/2”

1 1/2”

1 1/2”

2”2 1/2”

1”1 1/4”

1 1/2”

1 1/2”

2”2 1/2”

1”1 1/4”

1 1/2”

1 1/2”

2”2”

1”1”

1 1/4”

1 1/2”

1 1/2”

2”

S

74074087087011501250

H1

490490590590810810

H2

74074087087011501270

H3

350350350350400450

L

125019001900256025802780

MODEL

5080110140200250

The ZEUS Sabiana Air Handling Units have been designed anddeveloped to meet heating and air conditioning needs forindustrial, commercial and residential installations.The range is available in 6 vertical models and 6 horizontalmodels with an air flow varying from 5,000 to 25,000 m3/h.Heating outputs from 32 to 260 kW, cooling from 17 to 160 kW.

Air Handling UnitsConstructionZEUS:• Casing: aluminium holding frame and double skin sandwich panels 25 mm thick. Indoor panel made of galvanized steel, outdoor panel made of galvanized and prepainted steel in light blue colour.• Insulation: non-inflammable mineral wool insulation (fire class A1 in accordance to DIN 4102) density 90 kg/m3, thickness 25mm.• Fan: galvanized centrifugal fan with double exausting outlet, statically and dynamically balanced.• Transmission: driving pulley with varying diameter.• Motor: three phase form B3 UNEL-MEC 400V 50Hz protection IP 55, class F.• Battery: copper tubes, aluminium fins, painted steel collectors with 2, 3, 4 or 6 rows.• Filter: pleated cells type class G3, regenerating synthetic, zinc-coated frame, thickness 48 mm - front extraction.

Zeus

Dimension and coil header Diameter

Emission

E.A.T. 20°C, W.T. 70/60°C E.A.T. 27°C, R.H. 50%W.T. 7/12°C

30

3 2.5

100908070

60

50

40

30

25

20

15

10987

6

5

4

3

2

12

Air speed (m/sec)

Air

flow

-rat

e (m

3 /h

x 10

00)

100-75

125-75

125-100

200-125

175-100

200-150

250-175

300-200

350-250

400-300

500-300

650-350

MODELS

100-100

150-100

175-125

175-150

250-150

250-200

300-250

400-250

450-300

550-350

650-400

The VULCAN PRO air handling units are available in 23different sizes, in order to provide an air flow rangefrom 1.450 m3/h to 78.800 m3/h.They can satisfy any need of air conditioning, filtration,

humidification and heat recovery for any kindof enviroment: commercial, sport, residential,medical and industrial.

VULCrent 1.45can

hom

The Vdifferfrom They

ConstructionVULCAN PRO:The Vulcan Pro Air HandlingUnits are made withholding aluminium frameand with double skinsandwich panels.Thermo-acoustic insulation35mm or 50mm thick, madeof polyurethane foam orhigh density mineral wool.

Air Handling UnitsVulcan Pro

Strong construction andexcellent thermal and acoustic insulation.

Modular panel construction,with no thermal or acoustic bridges

Selection diagrams Unit Combinations

31

63.7590245

95.5750295

143.3994320

VAS 63 VAS 95 VAS 143kWAC

MODEL

ConstructionDUCK VAP:• The radiant panels is a special version of Duck Strip for steam. There are panels with 2 tubes or 3 tubes to provide a variation of output, these are then formed into widths of 30 cm, 60 cm, 90cm, to provide a variation in coverage. The strip is provided in modular lengths of 4 or 6 metres thus accomodating a total strip to the nearest 2 metres. The strip is supplied with 3 sections to make up a complete strip, first, intermediate and final. The first and final include headers and each section is connected to the one before it. The DUCK STRIP panels are completely painted in light GREY, RAL 9002 or in WHITE, RAL 9010 with epoxy- polyester powder dried at 180°C.• Sabiana VAS series steam boilers by Comitec provided in three heating outputs (63,7 - 95,5 - 143,3 kW) can be jointed in order to obtain higher emissions.• Sabiana ASA air venting device by Comitec.• Control panel QP1 and QP2 to control 1 or a series of steam generators.

Duck VapThe DUCK VAP vacuum steam join great flexibility andrecognised advantages of radiant panels with steamboilers with reduced installation costs and with thepossibility of installing the boilers outside, thereforereducing the need for a boiler room. The uniquenessof this system lies in their operation under vacuum,which allows the natural expansion of the steam andthe return of the condensation by gravity. It is there-fore a closed and sealed circuit in which there is noconsumption of steam and no refill with water. Thevacuum system furthermore generates steam at amaximum temperature of 110°C, which corresponds toa relative pressure of 0.45 bar and as a consequencethe system is not pressurised under normal operatingconditions.

Vacuum Steam Systems

32

75

115

100

150

INOXSABIANA 25/25R INOXSABIANA 50/50R Inside diameters mm Outside diameters mm Weight per linear metre, InoxSabiana kg/m Weight per linear metre, InoxSabiana -R (copper) kg/m Inner wall Rock wool insulation InoxSabiana outer wall InoxSabiana -R (copper) outer wall Pressure class with gasket Pressure class without gasket Max temperature of the flue gas with gasket °C Max temperature of the flue gas without gasket °C Gasket Thermal resistance of the wall R at 200°C m2K/W Minimum distance to combustible materials class O (flue serving a boiler on liquid or gas fuel) mm Minimum distance to combustible materials class G (flue serving a boiler on solid fuel) mm Average roughness value for the straight length Flow resistance coefficient of the insulated components Metric screw and bolts

According to EN 13384-1 : 2002According to EN 13384-1 : 2002

Stainless steel

According to EN 13384-1 : 2002According to EN 13384-1 : 2002

Stainless steel

50

75

75

115

AISI 316L steel, 2B finish, nominal thickness 0,5 mm50 mm thick - Min. density 90 kg/m3 - Toll. 0+30%

AISI 304 steel, BA finish, nominal thickness 0,5 mmAnnealed DHP copper 99,9 nominal thickness 0,6 mm

–N1 (40 Pa) negative pressure operation

–450–

AISI 316L steel, 2B finish, nominal thickness 0,5 mm25 mm thick - Min. density 90 kg/m3 - Toll. 0+30%

AISI 304 steel, BA finish, nominal thickness 0,5 mmAnnealed DHP copper 99,9 nominal thickness 0,6 mm

P2 (200 Pa)N1 (40 Pa) negative pressure operation

160450

Silicon rubber, blue0.74 0.75 0.76 0.77 0.77 0.780.34 0.36 0.36 0.37 0.37 0.38 0.39 0.39

35045017.519.5

40050019.522.0

45055022.024.5

50060024.026.5

55065026.029.0

60070028.031.5

1001504.45.1

1301805.56.2

1502006.17.0

1802307.38.3

2002507.99.0

2503009.711.0

30035011.412.9

35040013.214.9

Summary table

ConstructionINOXSABIANA 25/50:Inner lining:stainless steel AISI 316L.Thickness: 0,5 mm.Plasma welding.It is resistant to corrosiveproducts and it is free toexpand or contract as fluegas temperature changes.Outer casing:stainless steel AISI 304.Thicknees: 0,5 mm.Plasma Welding.It is weatherproof andcarries the structure load.Insulation:rockwool mineral wool.Thickness 25 mm or 50 mm,density around 90 kg/m3.Fixings and supports:stainless steel AISI 304.Minimized thermic bridgebetween inner and outercasing. Each insulated componentis single packed.

FluesInoxSabiana 25/50The system is designed for gravity flow application andit is suitable for oil and gas fired appliances as domesticand industrial boilers, stoves and heaters.

33

Diameter (mm):

Weight (kg/m per linear metre):

Steel: Inox AISI 316 L

Thickness (mm): 0.5

Max temperature of the flue gas (°C): 200 with gasket, 600 without gasket

Max rated pressure (Pa): 200 (elements with gasket)

801.1

1001.4

1201.7

1301.8

1402.0

1502.1

1602.3

1802.5

2002.8

2503.5

3004.2

The Sabiana INOXMONO series has been designed tooffer the maximum guarantee of safety and long lifein the discharge of flue gas from boilers.The male and the female ends of each element aremade together using the same belling machine, so asto ensure perfect coupling, with a minimum toleranceof ± 0.15 mm. All the elements in contact with theflue gas are made from AISI 316L stainless steel. Each element, as well as having its own locking clamp,can be supplied with a silicone gasket: this solutionis ideal for connecting the single walled flue to type Cappliances (wall hung boilers with forced draught)that may operate in conditions of overpressure.The choice of the materials, the use of the latestconstruction techniques and the care paid to everyaccessory place the product at the top of its category,reflecting the high quality of all Sabiana products.The range includes 11 different diameters (from80 to 300 mm) and a complete series of accessories

for satisfying all installation requirements.The Sabiana flues are perfectly adaptable to the latesthigh efficiency boilers, which have very low flue gastemperatures and high CO2 contents, thanks to thefollowing fundamental characteristics:• low thermal inertia with consequent immediate draught;• perfect impermeability to water vapour;• high resistance to corrosion, due to the quality of the steel used and the type of welding;• very low roughness values, so as to minimise the inside pressure drop.The single walled flues are usually installed insidedamaged existing chimneys (retubing).For outdoor installation, the bottom part of the fluemust be protected for the first two metres: nonetheless,double walled flues are recommended for these typesof installations, so as to assist the draught and decreasecondensation, which otherwise may be excessive.

FluesConstructionINOXMONO SABIANA:• AISI 316 L stainless steel wall (austenitic stainless steel 18/10 Mo with low carbon content, grade UNI X 2, CrNiMo 1712). Thickness: 0,5 mm. Properties: high resistance to intergranular corrosion and particularly aggressive products.• Silicone rubber gasket resistant to temperatures of up to 200°C.• Microplasma welding on all straight elements.• Junction on the 90° Tee piece made using the drawning process.• All the support and fastening elements are made from AISI 304 stainless steel (aluminium barge cover and wind-protection collar).• The screws supplied are in stainless steel.

InoxMono Sabiana

Summary table

element with gasket straight module microplasma welding process34


DUCK STRIP RADIANT PANELS: AEROSPATIALE TOULOUSENEW AIRBUS A380 PRODUCTION PLANT.INSTALLATION HEIGHT: 40 m

PULSAR RADIANT PANELS

DUCK STRIP RADIANT PANELS: AEROSPATIALE TOULOUSENEW AIRBUS A380 PRODUCTION PLANT.

INSTALLATION HEIGHT: 40 m

Sabiana s.p.a. • via Piave, 53 • 20011 Corbetta • Milano • Italy • phone +39.02.97203.1 r.a. / +39.02.97270429 / +39.02.97270576fax +39.02.9777282 / +39.02.9772820 • www.sabiana.it • [email protected]


GP -

E -

07/

11 C

OD. A

4000

100

G/07

/11

CARISMA - UAB "EXPOSITO"Carisma Serie CRS - High Pressure Fan Coil Units Carisma Serie CRS–ECM -...

Documents

Transcript of CARISMA - UAB "EXPOSITO"Carisma Serie CRS - High Pressure Fan Coil Units Carisma Serie CRS–ECM -...