8/11/2019 CARGADOR DE PERFIL BAJO New.pdf

1/2

Cat

Weld-On Ground Engaging Tool System

for Underground Mining Loaders

Caterpillar. The difference counts.

Cat

Ground Engaging Tools (GET) are designed to maximize productivityand protect more expensive components such as bucket base edges. Our

new weld-on system for Underground Mining Loaders, also known as

Load, Haul, Dump machines, is no exception. This system was designed

to be more productive than the previous half-arrow system and offers more

wear material to maximize system wear life and bucket protection.

Our new weld-on system also reduces downtime. Traditionally, corners

wear faster than edge segments causing the machine to be idled twice for

maintenance. The new design was developed for an even wear rate between

corners and edge segments, allowing both to be replaced at the same time.

The new system consists of four new parts: a right and left corner

along with two lengths of center-edge segments (850 and 1150 mm long.)

Center-edge segments are offered in two lengths to minimize waste when

cutting and fitting the parts. Complete installation instructions are available

through your Cat Dealer.

Cat Dealers define world-class

product support. We offer you the

right parts and service solutions,

when and where you need them.

The Cat Dealer network of highly

trained experts keeps your ent ire

fleet up and running to maximize

your equipment investment .

8/11/2019 CARGADOR DE PERFIL BAJO New.pdf

2/2

CatWeld-On Ground Engaging Tool System

PEHJ017 3 www.cat .com Printed in USA 200 7 Caterpillar All Rights Reserved

CAT, CATERPILL AR, their respective logos, Cat erpillar Yellow and the POWER EDGE trade dress, as well as corporate and product identity used herein,are trademarks of Caterpillar and may not be used without permission.

GET Warranty

Caterpillar warrants most groundengaging tools against breakage

during normal operation. If a piece of

Caterpillar GET breaks, Caterpillar

will replace it at no charge. See your

dealer for complete warranty details.

For more information on the Cat

Weld-On Ground Engaging Tool

System for Underground Mining

Loaders, see your Cat dealer today.

For more information on Cat

Underground Mining Trucks and

Loaders, visit www.cat.com.

Increased Service Life

When you depend on your

machines to perform at their

best, you want to maximizeuptime. Additional wear

material and new corner

and edge profiles increase

the time between GET

replacements, ensuring

uninterrupted productivity.

Profile Comparisons

132-1013 vs. New Corner 6Y-2107 vs. New Corner

nOLD nNEW

nOLD nNEW

Corner

73% more wear material 95% more wear material

132-1013 vs. New Center 6Y-2107 vs. New Center

Center

14% more wear material 28% more wear material