Card Template - Pattern #4

Stampin’ Card Template - #4 Beau5fully Aligned A rectangle, a square, and a pop of white. Basic Supplies Needed •5 1/2” ” x 8 1/2” cardstock base, scored at 4 1/4” •3 1/4” x 1 1/2” Basic White CS or a neutral color •2 3/4” x 5" patterned paper •3” square coordinating patterned paper •Scraps for accent images Directions 1. Stamp the greeting image on the 3 1/4” x 1 1/2” Basic White cardstock piece. 2. Attach the 2 3/4” x 5" piece of patterned paper on the front of the card base along the right side so that there is an even border of card front showing on the top, bottom and side. You will have about 1/4” of the card base showing on those three sides. 3. Then attach the 3” square piece of patterned paper over the Lirst piece. Align the square along the left side of the card front leaving a 1/4” border, and about 3/4” to 1” from the top of the card front. Try to choose patterns that coordinate with each other in color with patterns that complement each other. 4. Pop up the Basic White greeting piece with dimensionals and attach. This piece should butt up to the right edge of the card front and centered vertically within the 3” square. 5. Punch or die cut one or two accent images to arrange around the greeting focal point and attach to the card front. The perfect location for this accent image is in a position that is one third down from the top of the card and 1/3 over from one of the sides AND overlaps all three pieces. 6. Add any extra embellishments. Ways to Step-Up the Template • Make the Basic White piece into a tag and add coordinating ribbon. • Use the Tailored Tags dies to create a decorative tag. • Add extra layers of cardstock to matte the patterned paper. • 5 1/4” x 3” for matting the large piece • 3 1/4” square for the square piece. • Use a shaped punch or die to create the greeting piece ReallyRobinStamps.com

Upload
others
Category

Documents
view
3
download
0

Embed Size (px):

Transcript of Card Template - Pattern #4

Directions1. Stampthegreetingimageonthe31/4”x11/2”BasicWhitecardstockpiece.2. Attachthe23/4”x5"pieceofpatternedpaperonthefrontofthecardbasealongtherightsidesothatthereisanevenborderofcardfrontshowingonthetop,bottomandside.Youwillhaveabout1/4”ofthecardbaseshowingonthosethreesides.

3. Thenattachthe3”squarepieceofpatternedpaperovertheLirstpiece.Alignthesquarealongtheleftsideofthecardfrontleavinga1/4”border,andabout3/4”to1”fromthetopofthecardfront.Trytochoosepatternsthatcoordinatewitheachotherincolorwithpatternsthatcomplementeachother.

4. PopuptheBasicWhitegreetingpiecewithdimensionalsandattach.Thispieceshouldbuttuptotherightedgeofthecardfrontandcenteredverticallywithinthe3”square.

5. Punchordiecutoneortwoaccentimagestoarrangearoundthegreetingfocalpointandattachtothecardfront.Theperfectlocationforthisaccentimageisinapositionthatisonethirddownfromthetopofthecardand1/3overfromoneofthesidesANDoverlapsallthreepieces.

6. Addanyextraembellishments.

WaystoStep-UptheTemplate• MaketheBasicWhitepieceintoatagandaddcoordinatingribbon.• UsetheTailoredTagsdiestocreateadecorativetag.• Addextralayersofcardstocktomattethepatternedpaper.

• 51/4”x3”formattingthelargepiece• 31/4”squareforthesquarepiece.

• Useashapedpunchordietocreatethegreetingpiece

ReallyRobinStamps.com