CarbonSteel,StainlessSteel,NickelAlloy&AlloySteelFasteners ......206 DIN8140...

http://www.klsteel.com 1 / 23 Email: [email protected]

http://www.klsteel.commailto:[email protected]


Metals International Limited is a worldwide leading company specializing in all kinds of fastenersand accessories.

We supply bolts,screws,nuts,rods and other some nonstandard fasteners under the different standards ofGB, ANSI, DIN, BS, JIS, AS and ISO, grade of 6.8, 8.8, 10.9, 12.9, B7, B7M, L7, L7M. Our producingrange: diameter: M12-M100; Length: 25-1200MM(Bolt) and 100-6000MM(Thread Rod).

Products have been passed ISO:9001~2000 Quality System Certificate. Main production equipment: twosets heat treatment lines, three sets hot forged makers and 18 sets threading machine. Main testingmachine: 100 tons & 60tons tensile machine, charpy impact tester, crack detected machine, hardnesstester, torque tester and so on.Steel Fasteners

Forms:Stud BoltsHex BoltsSquare BoltsHex NutsT-Head BoltsFriction Grip BoltsStructural BoltsU-BoltsJ-BoltsTie BoltsEye BoltsFoundation Bolts

BoltHex HeadHeavy Hex HeadStud Bolt/Thread RodFlange HeadRound HeadHex SocketEye & lifting

NutScrewAnchorWasherRivet & Rivet NutPin& Others as per drawing and customers specifications.



Carbon Steel, Stainless Steel, Nickel Alloy & Alloy Steel FastenersStandard: ASTM A193-B7, A193-B16, A194-2H, A194-8MA, A193-B7M , A320-L7, A194-2HM, A194-3,A193-B8, A320L7M , A194-8 , A194-4，A193-B8M, A320 B8, A194-8A, A194-7Grade: B 8 (304), B 8C (SS 347), B 8M (SS 316), B 8 T (SS 321), A 2, A 4,

Standard: ASTM / ASME SB 160 / 164 / 425 / 166 / 446 / 574 / 472Material : Alloy 904L, SMO254, Alloy 20, Sanicro 28, UNS 4400 (MONEL 400), UNS 8825 (INCONEL825), UNS 6600 (INCONEL 600) / UNS 6601 (INCONEL 601), UNS 6625 (INCONEL 625), UNS 10276(HASTELLOY C 276), UNS 8020 (ALLOY 20 / 20 CB 3)Material : Duplex 2205 UNS S32205 UNS S31803 ASTM A182 F51 F60, Duplex 329 ASTM A182 F52Material : Super Duplex 2507 UNS S32750 ASTM A182 F53, UNS S32760 ASTM A182 F55 Din 1.4501Material : 22CrMo4, 24CrMo4, 25CrMo4, 26CrMo4, 34CrMo4, 42CrMo4, 34CrNiMo6, 41CrNiMo6Material : AISI 4130, SAE 4130, AISI 4140, SAE 4140, AISI 4145, SAE 4145, AISI 4340, SAE 4340Material : EN 8, EN 9, EN 19, EN 24

Heat Treatments Condition : Annealing, Solution Annealing, Normalizing, Tempered, Quenched &Tempered Black oxidizing, Phosphating, Nitriding

All the products the surface including:Coating : Bright Zinc Plated, Hot Dip Galvanised, Phosphatided, Silver, Chromated, Nickel PlatedCoatings : Yellow Zinc Plating, Blue Zinc Plating, White Zinc Plating, Black OxideCoatings : Cadmium Plating - Silver, Cadmium Plating - Yellow, XYLAN / PTFE, FluoropolymerTreatments :

Now our products are widely distributed Southeast Asia, Europe, Middle East and so on.

our corporation is always dedicated to bring our customers the products with superior quality, which hasbeen welcomed by numerous fastener distributers around the world and benefits from our dedication inthe fabrication of fasteners, stringent quality control, custom services.



Specification/ Sizes/ClassSpecification Size ClassGB 901 M16~M48GB 798 M16~M48GB 5783 M16~M48GB 70 M16~M48GB/T1228~1231 M16~M30 10.9S; 8.8SGB/T3632~3633 M16~M24 10.9SGB/T16939 M16~M64 10.9S; 9.8SGB/T10433 Ø6~Ø22GB/T5780~5786 M16~M48 4.8,8.8,10.9GB/T6170~6173 M16~M48 6; 8; 10ASTM A193/A193M 3/8"-3 1/2"/M12-M80 B7,B7M B16, B8, B8MASTM A194/A194M 3/8"-4"/M8-M100 2H,2HM,4,4L,7,7L, 7,7M,8,8M,ASTM A307 1/2" 2 1/2" A; B; CASTM A320 1/2"~1 1/2" L7,L7MASTMA325 A490 1/2"~1 1/2" A325; A490ASTMA325M A490M M16~M36 8S; 10SASTM A453 660A M16~M36ASTM A563 1/2"~1 1/2" A; C; DHASTM A563M M16~M36 8S; 10SASTM A574 M16~M36ASTM F436 M16~M36ASTM F1852 1/2"~1 1/8" A325DIN6914~6916 M16~M30 10.9DIN931,933,DIN 934,DIN 936 M10-M100 8,10,12ISO7412;4775; 7416 M10-M100 8.8; 10.9ISO4014; 4017 M10-M100 8.8JIS B 1186 M10-M100 F8T; F10T;F11TJSSⅡ 09 M10-M100 S10TBS4395 M10-M100 8.8; 10.9AS1252 M10-M100 8.8UNI 5587,5588 M10-M100UNI 5931 M10-M100UNI 5737 M10-M100SAE J995 3/8"-1 1/2" 2,5,8,10,A563-A,A563-C,A563-DH



SpecificationsItem DIN-Standard Desciption in English ISO-Standard GB-Standard1 DIN1 Taper pins ISO2339 GB1172 DIN7 Parallel pins ISO2339 GB119-863 DIN84 Slotted cheese head screws ISO1207 GB65-854 DIN85 Slotted pan head screws ISO1580 GB67-855 DIN93 Tab washers GB8546 DIN94 Split cooter pins ISO1234 GB917 DIN95 Slotted raised csk head wood screws GB1018 DIN96 Slotted round head wood screws GB999 DIN97 Slotted countersunk head wood screws GB10010 DIN125-A Plain washers ISO7089 GB97.1-8511 DIN125-B Mediun washers ISO7090 GB97.2-8512 DIN126 Plain washers ISO709113 DIN127-A Spring lock washers,tang ends GB724414 DIN127-B Spring lock washers,square ends GB93-8715 DIN128-A Single coil spring lock washers GB7245-8716 DIN137-A Curved spring washers17 DIN137-B Wave spring washers GB95518 DIN186 T-head blots with square neck GB37-8819 DIN188 T-head bolts with double nip20 DIN258 Taper pins with threaded end ISO873721 DIN261 T-head bolts22 DIN315AF Wing nuts America form23 DIN315DF Wing nuts germany form GB62-8824 DIN316AF Wing screws America form25 DIN317DF Wing screws germany form26 DIN319 Ball knobs27 DIN404 Slotted capstan screws GB832-8828 DIN417 Slotted set srews with full dog point ISO7435 GB75-8529 DIN427 Slotted set srews with chamfered end ISO2342 GB73-8530 DIN431 Pip nuts with thread GB808-8831 DIN432 External tap GB856-8832 DIN433 Washers for cheese head screws ISO7092 GB848-9533 DIN434 Square taper washers for U-section GB852-8834 DIN435 Square taper washers for I-sections GB852-8835 DIN436 Square washers36 DIN438 Slotted set with cup point ISO7436 GB74-8537 DIN439 Hexagon thin nuts ISO4035 GB6172-8638 DIN439 Hexagon thin nuts ISO8675 GB6173-8639 DIN440 Rounds washers for wood constructions ISO709440 DIN443 Sealing caps,push-in type41 DIN444 Eye bolts form B GB798-8842 DIN462 Internal tab washers43 DIN463 Washers with two taps GB855-8844 DIN464 Knurled thumb screws with collar GB834-88



45 DIN465 Slotted knurled thumb screws with collar46 DIN466 Knurled thumb nuts with collar GB806-8847 DIN467 Knurled thumb thin nuts GB807-8848 DIN470 Sealing washers49 DIN471 Retaining rings for shafts(external),circlips GB893-8650 DIN472 Retaining rings for bores(internal),circlips GB893.8651 DIN478 Square head bolts with collar52 DIN479 Square head bolts with half dog point53 DIN480 Square head bolts with collar,half dog point54 DIN508 T-slot nuts ISO29955 DIN525 Single end studs56 DIN529 Masonry bolts GB799-8857 DIN546 Slotted round nuts GB817-7658 DIN547 Round nuts with drilled holes in one face GB815-8859 DIN551 Slotted set screws with flat point ISO4776 GB73-8560 DIN553 Slotted set screws with cone point ISO7434 GB71-8561 DIN555 Hexagon nuts ISO403462 DIN557 Square nuts GB39-8863 DIN558 Hexagon screws ISO401864 DIN561 Hexagon set screws with full dog point65 DIN562 Square nuts without bevel(pressed nuts)66 DIN571 Hexgon head wood screw GB102-8667 DIN580 Lifting eye bolts ISO3266 GB825-7668 DIN582 Lifting eye nuts69 DIN601 Hexagon blots ISO401670 DIN603 Mushroom head square neck bolts(carriage

bolts)ISO8677 GB14-88

71 DIN604 Flat countersunk nib bolts72 DIN605 Flat countersunk long squareneck bolts73 DIN607 Cup head nib bolts74 DIN608 Flat countersunk short square neck bolts75 DIN609 Hexagon fitted bolts,long thread76 DIN610 Hexagon fitted bolts short thread77 DIN653 Knurled thumb screws thin type GB835-8878 DIN660 Round head rivets ISO1051 GB867-8679 DIN661 Contersunk head rivets ISO1051 GB869-8680 DIN662 Raised contersunk head rivets ISO105181 DIN674 Mushroom head rivets ISO105182 DIN703 Adjusting rings,heavy range(shafting

collars)83 DIN705 Adjusting rings,light range(shafting collars) GB816-8884 DIN741 Wire rope clips85 DIN787 T-slot screws ISO29986 DIN835 Studs-metal(end=2d) GB900-8887 DIN906 Hexagon socket pipe plugs,conical thread88 DIN908 Thread89 DIN909 Thread90 DIN910 Hexagon head screw plugs,cyl.thread



91 DIN911 Socket wrenches ISO293692 DIN912 Hexagon socket cap screws ISO4762 GB70-8593 DIN913 Hexagon socket set screws with falt point ISO4026 GB77-8594 DIN914 Hexagon socket set screws with cone point ISO4027 GB78-8595 DIN915 Hexagon socket set screws with dog point ISO4028 GB79-8596 DIN916 Hexagon socket set screws with cup point ISO4029 GB80-8597 DIN917 Hexagon cap nuts98 DIN920 Slotted short cheese head screws99 DIN921 Slotted large cheese head screws GB838-88100 DIN923 Slotted pan head screw with shoulder GB830-88101 DIN927 Slotted shoulder screws102 DIN928 Square weld nuts GB/T13680-92103 DIN929 Hexagon weld nuts GB/T13681-92104 DIN931 Hexagon head screws ISO4014 GB5782-86105 DIN933 Hexagon head screws ISO4017 GB5783-86106 DIN934 Hexagon full nuts ISO4032 GB6170-86107 DIN934 Hexagon full nuts ISO8673 GB6171-86108 DIN935 Hexagon slotted and castle nuts ISO7035 GB6178-86109 DIN936 Hexagon thin nuts ISO4035 GB6172.1-86110 DIN937 Hexagon thin slotted and caslte nuts ISO7038 GB6181-86111 DIN938 Studs metal(end=1d) GB897-88112 DIN939 Studs metal(end=1.25d) GB898-88113 DIN940 Studs metal(end=1.5d)114 DIN960 Hexagon head bolts,metric fine pitch thread ISO8765 GB5785-86115 DIN961 Hexagon head bolts,metric fine pitch thread ISO8676 GB8786-86116 DIN962 Additional shapes and versions for bolts117 DIN963 Slotted countersund head screws ISO2009 GB68-85118 DIN964 Slotted raised countersunk oval head screws ISO2010 GB69-85119 DIN965 Cross recessed countersunk head screws ISO7046 GB819-85120 DIN966 Cross recessed raised Countersunk head

screwsISO7047 GB820-85

121 DIN970 Hexagon nuts type-1122 DIN971 Hexagon nuts type-2123 DIN972 Hexagon nuts with fine thread124 DIN975 Threaded rods(studdings) ISO8674 GB6176-86125 DIN976 Threaded pins(stud bolts) GB15389-94126 DIN979 Hexagon thin slotted and castle nuts127 DIN980 Prevaillng rorque type hexagon nuts,all metal nuts128 DIN981 Locknuts ISO7199 GB6184-86129 DIN982 Prevailing rorque type hexagon nuts,heavy

type,with nylonISO2982 GB812-88

130 DIN985 Prevalling torque type hoxagon nuts,heavytype,with nylon

ISO7040 GB889.1-86

131 DIN986 Preailling torque typedomed capnuts withnylon insert

ISO10511 GB6172.2-86

132 DIN988 Shim rings133 DIN1052 Washers for timber connectors134 DIN1151 Round plain head nails135 DIN1440 Plain washers for clevis pins(A型) ISO8738



136 DIN1441 Plain washers for clevis pins137 DIN1444 Clevis pins with head ISO2341138 DIN1471 Grooved pins,taper grooved ISO8744 GB/T13829.2139 DIN1472 Grooved pins,taper grooved half length ISO8745 GB/T13829.2140 DIN1473 Grooved pins,parallel grooved full length ISO8740141 DIN1474 Grooved pins,reverve grooved half length ISO8741142 DIN1475 Grooved pins,center grooved ISO8742143 DIN1476 Grooved pins with round head ISO8746144 DIN1477 Grooved pins with countersunk head ISO8747145 DIN1479 Turnuckles(center parts),made out of

hexagon bar146 DIN1480 Turnuckles with eye bolt and hook bolt147 DIN1481 Spring pins,heavy type ISO8752 GB879-86148 DIN1587 Hexagon domed cap nuts GB802-88149 DIN1804 Slotted round nuts for hook spammer150 DIN1816 Round nuts with set holes151 DIN2093 Disc springs152 DIN3017 Hose clamps153 DIN3404 Lubricating nipples,button head154 DIN3567 Shackles for conduilts155 DIN3570 Stirrup bolts(U-bolts)156 DIN6319 Spherical washers,conical seats GB849-88157 DIN6325 Parallel pins ISO8734158 DIN6330 Hexagon nuts,1.5d GB56-88159 DIN6331 Hexagon nuts,1.5d with collar GB6177-86160 DIN6334 Hexagon nuts,3d161 DIN6797-A External teeth lock washers GB862.1-87162 DIN6797-I Internal teeth lock washers GB861.1-87163 DIN6798-A External teeth serrated lock washers GB862.2-87164 DIN6798-I Internal teeth serrated lock washers GB861.2-87165 DIN6799 Retaining rings for shafts(E-rings),circlips GB896-76166 DIN6885 Parallel keys(form A) ISO773/2491167 DIN6888 Woodruff keys ISO3912168 DIN6899 Thimbles169 DIN6900 Screws and washers assemblies170 DIN6901 Tapping screws and washer assemblies GB9074.1-17171 DIN6912 Hexagon cocket head cap screws with

hole,low headGB9074.18-23

172 DIN6914 Hexagon head bolts with large head(friction grip nolts)

173 DIN6915 Hexagon nuts with large wideth across flat(friction grip nuts)174 DIN6916 Round washers for friction grip bolts175 DIN6917 Spuare taper washers for friction grip bolts on T-176 DIN6923 Hexagon flange nuts ISO4161 GB6187-86177 DIN6925 Prevailing torque type hexagon nuts,all

metallic nutsISO7042 GB6185.1-2000

181 DIN7346 Spring pins,light type ISO13337182 DIN7349 Washers for bolts with heavy type spring



pinss183 DIN7500 Thread forming screws for ISO-metric

thread184 DIN7504 Self-drilling tapping screws185 DIN7513 Thread cutting screws186 DIN7516 Thread cutting screws cross recess187 DIN7965 Tee nuts with pronge188 DIN7968 Hexagon head fitted bolts for steel

structuresGB1228/1229/1230

189 DIN7971 Pan head tapping screws with slot ISO1481 GB5282-85190 DIN7972 countersunk flat head tapping screws with

slotISO1482 GB5283-85

191 DIN7973 Raised sountersunk oval head tappingscrews with slot

ISO1483 GB5284-85

192 DIN7976 Hexagon tapping screws ISO1479 GB5285-85193 DIN7980 Spring lock washers for screws with

cylindrical headsISO8738

194 DIN7981 Pan head tapping screws with cross recessed ISO7049 GB845-85195 DIN7982 Countersunk flat head tapping screws with

cross recessedISO7050 GB846-85

196 DIN7983 Raised countersunk oval head tappingscrews with cross

ISO7051 GB847-86

197 DIN7984 Hexagon socket head cap screwswith,reduced head

198 DIN7985 Pan head screws with cross recessed ISO7045 GB818-85199 DIN7989 Washers for steel structures GB1230-84200 DIN7990 Hexagon head bolts for steel structures GB1229-84201 DIN7991 Hexagon socket coutersunk head screws ISO10642202 DIN7993 Roundwire snap rings for shafts GB895.2-86203 DIN7995 Cross recessed raised countersunk head

wood screwsGB952-86

204 DIN7996 Cross recessed round head wood screws GB950-86205 DIN7997 Cross recessed countersunk head wood

screwsGB951-86

206 DIN8140 Ciol inserts,coarse,fine thread,silf locking207 DIN9021 Washers,outside diameter appro.3d ISO7093 GB96-85208 DIN11024 sping cotter for a bolt209 DIN13257 Belting bolts210 DIN18182 Dry wall screws211 DIN28129 Lifting nuts(eye nuts) GB63-88212 DIN70952 Tab washer for slotted round nuts GB/858-88



Stirrup bolts(U-hook)



U-bolt

Stirrup bolts(U-hook)

Masonry bolts 3

http://tjxhh.com/ProductView.asp?ID=375http://tjxhh.com/ProductView.asp?ID=348http://tjxhh.com/ProductView.asp?ID=378http://www.klsteel.commailto:[email protected]


Masonry bolts

Galvanized Nuts

http://tjxhh.com/ProductView.asp?ID=379http://tjxhh.com/ProductView.asp?ID=382http://www.klsteel.commailto:[email protected]


High-strength bolts

Fastening bolts

http://tjxhh.com/ProductView.asp?ID=387http://www.klsteel.commailto:[email protected]


Bolt 2

Bolt full map



Carriage bolt

Hexagon bolt



Expansion bolt

Flat head bolt



Studs

Stainless steel screws

http://tjxhh.com/ProductView.asp?ID=397http://www.klsteel.commailto:[email protected]


Screw chain

Tapping screws



Drilling Wire

Locknut



CAP NUT

Nut 2



Nut 3

Play mat



Washers

Gasket



Flower bar

Pins

CarbonSteel,StainlessSteel,NickelAlloy&AlloySteelFasteners ......206 DIN8140...

Documents

Transcript of CarbonSteel,StainlessSteel,NickelAlloy&AlloySteelFasteners ......206 DIN8140...