Carbon Steel Check Valve Descriptions

COMPLETE REVISION March 2016

Piping

PIP PNSMV005 Carbon Steel Check Valve Descriptions

PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to minimize the cost of process industry facilities, this Practice has been prepared from the technical requirements in the existing standards of major industrial users, contractors, or standards organizations. By harmonizing these technical requirements into a single set of Practices, administrative, application, and engineering costs to both the purchaser and the manufacturer should be reduced. While this Practice is expected to incorporate the majority of requirements of most users, individual applications may involve requirements that will be appended to and take precedence over this Practice. Determinations concerning fitness for purpose and particular matters or application of the Practice to particular project or engineering situations should not be made solely on information contained in these materials. The use of trade names from time to time should not be viewed as an expression of preference but rather recognized as normal usage in the trade. Other brands having the same specifications are equally correct and may be substituted for those named. All Practices or guidelines are intended to be consistent with applicable laws and regulations including OSHA requirements. To the extent these Practices or guidelines should conflict with OSHA or other applicable laws or regulations, such laws or regulations must be followed. Consult an appropriate professional before applying or acting on any material contained in or suggested by the Practice.

This Practice is subject to revision at any time.

© Process Industry Practices (PIP), Construction Industry Institute, The University of Texas at Austin, 3925 West Braker Lane (R4500), Austin, Texas 78759. PIP Member Companies and Subscribers may copy this Practice for their internal use. Changes or modifications of any kind are not permitted within any PIP Practice without the express written authorization of PIP. Authorized Users may attach addenda or overlays to clearly indicate modifications or exceptions to specific sections of PIP Practices. Authorized Users may provide their clients, suppliers and contractors with copies of the Practice solely for Authorized Users’ purposes. These purposes include but are not limited to the procurement process (e.g., as attachments to requests for quotation/ purchase orders or requests for proposals/contracts) and preparation and issue of design engineering deliverables for use on a specific project by Authorized User’s client. PIP’s copyright notices must be clearly indicated and unequivocally incorporated in documents where an Authorized User desires to provide any third party with copies of the Practice.

PRINTING HISTORY October 1995 Issued February 1999 Complete Revision November 2003 Technical Revision March 2016 Complete Revision February 1997 Revision May 2000 Revision November 2005 Technical Revision June 1998 Revision April 2001 Revision March 2010 Complete Revision

Not printed with State funds

COMPLETE REVISION March 2016

Piping

Process Industry Practices Page 1 of 25

PIP PNSMV005 Carbon Steel Check Valve Descriptions

Table of Contents

1. Introduction ................................. 2 1.1 Purpose ............................................ 2 1.2 Scope ............................................... 2

2. References .................................. 2 2.1 Process Industry Practices ............... 2

3. Valve Designation System ......... 2

4. Notes ............................................ 2

5. Cross Reference ......................... 3

6. Valve Descriptions ...................... 4

PIP PNSMV005 COMPLETE REVISION Carbon Steel Check Valve Descriptions March 2016


1. Introduction

1.1 Purpose This Practice provides requirements for suppliers providing carbon steel check valves included in PIP Piping Line Class Material Specifications.

1.2 Scope This Practice describes the requirements for carbon steel check valves.

2. References

Applicable parts of the following Practice shall be considered an integral part of this Practice. The edition in effect on the date of contract award shall be used, except as otherwise noted. Short titles will be used herein where appropriate.

2.1 Process Industry Practices (PIP) – PIP PNCM0004 - Valve Commodity Codes Designator System

3. Valve Designation System

3.1 For a full explanation of the format used to structure the valve numbers listed within this Practice, refer to PIP PNCM0004.

3.2 This Practice provides descriptions for three types of check valves: dual plate, lift, and swing. Therefore, the first two characters in the valve numbers are CD (dual plate), CL (lift), and CS (swing).

3.3 The valves listed in Section 5 and Section 6 of this Practice are sorted by the unique valve number designation in ascending alphanumeric sequence (e.g., CD01CA500, CL03CB500, CS03CA500).

4. Notes

4.1 Occasionally, valve size ranges listed in this Practice are broader than the size ranges shown for the same valves on a piping line class material specification. While the “most common practice” has been used to specify valve size ranges on line class specifications, a purchaser may need to utilize a valve in a size outside this “common practice” choice. Thus, for reference purposes, the full size range for which a given valve is typically manufactured is shown in this Practice.

4.2 Requirements for accessories (e.g., dampeners, dash pots, slam retarders, power assists) for swing check valves are not specified in piping line specifications or valve descriptions. Purchasers shall define the requirements for such accessories in their specifications.



5. Cross Reference Valve Number Applicable Line Classes CD01CA500 1CA1S01 CD01CA501 Not Used CD01CA700 1CA1S01 CD01CA701 1CA1S01 CD01CA702 1CA1S01 CD01CB500 1CB1S01, 1CB2S01, 1CB3S01, 1CS1B02 CD01CB501

CD01CB700 1CS1B02 1CB1S01, 1CB2S01, 1CB3S01, 1CS1B01, 1CS1B02, 1CS1S01, 1CS1S02, 1CS2S01, 1SA0B01

CD01CB701 1CB1S01, 1CB2S01, 1CS1B02, 1CS1S01, 1CS1S02, 1CS2S01 CD01CB702 1CB1S01, 1CB2S01, 1CB3S01, 1CS1B02 CD01CB703 Not Used CD03CA500 3CA1S01 CD03CA700 3CA1S01 CD03CA701 3CA1S01 CD03CA702 3CA1S01 CD03CA703 Not Used CD03CB500 3CB1S01, 3CB2S01, 3CS1B01, 3CS2B01 CD03CB501

CD03CB700 3CS1B01, 3CS2B01 3CB1S01, 3CB2S01, 3CS1B01, 3CS2B01, 3CS1S01, 3CS1S02, 3CS2S01, 3SA0B01

CD03CB701 3CB1S01, 3CB2S01, 3CS1B01, 3CS2B01, 3CS1S01, 3CS1S02, 3CS2S01 CD03CB702 3CB1S01, 3CB2S01, 3CS1B01, 3CS2B01 CD03CB703 Not Used CD06CA500 6CA1S01 CD06CA700 6CA1S01 CD06CA701 6CA1S01 CD06CA702 6CA1S01 CD06CA703 Not Used CD06CB500 6CB1S01, 6CB2S01 CD06CB700 6CB1S01, 6CB2S01, 6SA0B01 CD06CB701 6CB1S01, 6CB2S01 CD06CB702 6CB1S01, 6CB2S01 CD06CB703 Not Used CD09CB500 9CB1S01, 9CB2S01 CD09CB700 9CB1S01, 9CB2S01 CD09CB701 9CB1S01, 9CB2S01 CD15CB700 15CB1S01, 15CB2S01 CD15CB701 15CB1S01, 15CB2S01 CL01CB500 1CS1B01, 1CS1B02, 1SA0B01 CL03CB500 3CS1B01, 3CS2B01, 3SA0B01 CL06CB500 6SA0B01 CL08CA300 1CA1S01, 3CA1S01, 6CA1S01 CL08CB000 Not Used CL08CB300 1CB1S01, 1CB2S01, 1CB3S01, 1CS1S01, 1CS1S02, 1CS2S01, 3CB1S01,



3CB2S01, 3CS1S01, 3CS1S02, 3CS2S01, 6CB1S01, 6CB2S01 CL08CB301 6CS1S01 CL15CB300 9CB1S01, 9CB2S01, 15CB1S01, 15CB2S01 CL15CB301 9CS1S01, 15CS1S01 CS01CA500 1CA1S01 CS01CA501 1CA1S01 CS01CB500 1CB1S01, 1CB2S01, 1CB3S01, 1CS1B01, 1CS1B02, 1CS1S01, 1CS1S02,

1CS2S01, 1SA0B01

CS01CB501 1CB1S01, 1CB2S01, 1CS1B02, 1CS1S01, 1CS1S02, 1CS2S01 CS01CB550 1CS1J01 CS03CA500 3CA1S01 CS03CA501 3CA1S01 CS03CB500 3CB1S01, 3CB2S01, 3CS1B01, 3CS2B01, 3CS1S01, 3CS1S02, 3CS2S01,

3SA0B01

CS03CB501 3CB1S01, 3CB2S01, 3CS1B01, 3CS2B01, 3CS1S01, 3CS1S02, 3CS2S01 CS03CB550 3CS1J01 CS06CA500 6CA1S01 CS06CA501 6CA1S01 CS06CB500 6CB1S01, 6CB2S01, 6SA0B01 CS06CB501 6CB1S01, 6CB2S01 CS06CB800 6CS1S01 CS06CB801 6CS1S01 CS09CB500 9CB1S01, 9CB2S01 CS09CB800 9CS1S01 CS15CB500 15CB1S01, 15CB2S01 CS15CB800 15CS1S01

6. Valve Descriptions

Description of CHECK Valve (CD01CA500): Type: . . . . . . . . . . . . . . . . . . . . . . . . Check Design Type: . . . . . . . . . . . . . . . . . . Dual Plate, Retainerless Valve Size: . . . . . . . . . . . . . . . . . . . . NPS 8 -to- NPS 24 Service: . . . . . . . . . . . . . . . . . . . . . . -46 to 343 °C (-50 to 650 °F) Class: . . . . . . . . . . . . . . . . . . . . . . . . ASME 150 Ends: . . . . . . . . . . . . . . . . . . . . . . . . Flanged RF Body: . . . . . . . . . . . . . . . . . . . . . . . . ITCS (ASTM A352-LCB or ASTM A352-LCC) Trim: . . . . . . . . . . . . . . . . . . . . . . . . . API 594 TRIM 10 Hinge Pin: . . . . . . . . . . . . . . . . . . . . 316 SS Springs: . . . . . . . . . . . . . . . . . . . . . . Inconel X-750 Stop Pin: . . . . . . . . . . . . . . . . . . . . . 316 SS Body Type: . . . . . . . . . . . . . . . . . . . . Double Flanged Installation: . . . . . . . . . . . . . . . . . . . Horizontal - Hinge Pin Vertical or Vertical - Upward The standards are: DESIGN: API 594 Type A ENDS: ASME B16.5 RATING: ASME B16.34 TESTING: API 598 DIMENSIONAL: API 594



Description of CHECK Valve (CD01CA501): Type: . . . . . . . . . . . . . . . . . . . . . . . . Check Design Type: . . . . . . . . . . . . . . . . . . Dual Plate, Retainerless Valve Size: . . . . . . . . . . . . . . . . . . . . NPS 26 -to- NPS 48 Service: . . . . . . . . . . . . . . . . . . . . . . -46 to 343 °C (-50 to 650 °F) Class: . . . . . . . . . . . . . . . . . . . . . . . . ASME 150 Ends: . . . . . . . . . . . . . . . . . . . . . . . . Flanged RF Body: . . . . . . . . . . . . . . . . . . . . . . . . ITCS (ASTM A352-LCB or ASTM A352-LCC) Trim: . . . . . . . . . . . . . . . . . . . . . . . . . API 594 TRIM 10 Hinge Pin: . . . . . . . . . . . . . . . . . . . . 316 SS Springs: . . . . . . . . . . . . . . . . . . . . . . Inconel X-750 Stop Pin: . . . . . . . . . . . . . . . . . . . . . 316 SS Body Type: . . . . . . . . . . . . . . . . . . . . Double Flanged Installation: . . . . . . . . . . . . . . . . . . . Horizontal - Hinge Pin Vertical or Vertical - Upward The standards are: DESIGN: API 594 Type A ENDS: ASME B16.47 Series B RATING: ASME B16.34 TESTING: API 598 DIMENSIONAL: API 594

Description of CHECK Valve (CD01CA700): Type: . . . . . . . . . . . . . . . . . . . . . . . . Check Design Type: . . . . . . . . . . . . . . . . . . Dual Plate, Retainerless Valve Size: . . . . . . . . . . . . . . . . . . . . NPS 2 -to- NPS 24 Service: . . . . . . . . . . . . . . . . . . . . . . -46 to 343 °C (-50 to 650 °F) Class: . . . . . . . . . . . . . . . . . . . . . . . . ASME 150 Ends: . . . . . . . . . . . . . . . . . . . . . . . . RF Body: . . . . . . . . . . . . . . . . . . . . . . . . ITCS (ASTM A352-LCB or ASTM A352-LCC) Trim: . . . . . . . . . . . . . . . . . . . . . . . . . API 594 TRIM 10 Hinge Pin: . . . . . . . . . . . . . . . . . . . . 316 SS Springs: . . . . . . . . . . . . . . . . . . . . . . Inconel X-750 Stop Pin: . . . . . . . . . . . . . . . . . . . . . 316 SS Body Type: . . . . . . . . . . . . . . . . . . . . Wafer Installation: . . . . . . . . . . . . . . . . . . . Horizontal - Hinge Pin Vertical or Vertical - Upward The standards are: DESIGN: API 594 Type A ENDS: ASME B16.5 RATING: ASME B16.34 TESTING: API 598 DIMENSIONAL: API 594

Description of CHECK Valve (CD01CA701): Type: . . . . . . . . . . . . . . . . . . . . . . . . Check Design Type: . . . . . . . . . . . . . . . . . . Dual Plate, Retainerless Valve Size: . . . . . . . . . . . . . . . . . . . . NPS 26 -to- NPS 48 Service: . . . . . . . . . . . . . . . . . . . . . . -46 to 343 °C (-50 to 650 °F) Class: . . . . . . . . . . . . . . . . . . . . . . . . ASME 150 Ends: . . . . . . . . . . . . . . . . . . . . . . . . RF Body: . . . . . . . . . . . . . . . . . . . . . . . . ITCS (ASTM A352-LCB or ASTM A352-LCC) Trim: . . . . . . . . . . . . . . . . . . . . . . . . . API 594 TRIM 10 Hinge Pin: . . . . . . . . . . . . . . . . . . . . 316 SS Springs: . . . . . . . . . . . . . . . . . . . . . . Inconel X-750 Stop Pin: . . . . . . . . . . . . . . . . . . . . . 316 SS Body Type: . . . . . . . . . . . . . . . . . . . . Wafer Installation: . . . . . . . . . . . . . . . . . . . Horizontal - Hinge Pin Vertical or Vertical - Upward The standards are: DESIGN: API 594 Type A ENDS: ASME B16.47 Series B RATING: ASME B16.34 TESTING: API 598 DIMENSIONAL: API 594



Description of CHECK Valve (CD01CA702): Type: . . . . . . . . . . . . . . . . . . . . . . . . Check Design Type: . . . . . . . . . . . . . . . . . . Dual Plate, Retainerless Valve Size: . . . . . . . . . . . . . . . . . . . . NPS 26 -to- NPS 48 Service: . . . . . . . . . . . . . . . . . . . . . . -46 to 343 °C (-50 to 650 °F) Class: . . . . . . . . . . . . . . . . . . . . . . . . ASME 150 Ends: . . . . . . . . . . . . . . . . . . . . . . . . RF Body: . . . . . . . . . . . . . . . . . . . . . . . . ITCS (ASTM A352-LCB or ASTM A352-LCC) Trim: . . . . . . . . . . . . . . . . . . . . . . . . . API 594 TRIM 10 Hinge Pin: . . . . . . . . . . . . . . . . . . . . 316 SS Springs: . . . . . . . . . . . . . . . . . . . . . . Inconel X-750 Stop Pin: . . . . . . . . . . . . . . . . . . . . . 316 SS Body Type: . . . . . . . . . . . . . . . . . . . . Lugged Installation: . . . . . . . . . . . . . . . . . . . Horizontal - Hinge Pin Vertical or Vertical - Upward The standards are: DESIGN: API 594 Type A ENDS: ASME B16.47 Series B RATING: ASME B16.34 TESTING: API 598 DIMENSIONAL: API 594

Description of CHECK Valve (CD01CB500): Type: . . . . . . . . . . . . . . . . . . . . . . . . Check Design Type: . . . . . . . . . . . . . . . . . . Dual Plate, Retainerless Valve Size: . . . . . . . . . . . . . . . . . . . . NPS 8 -to- NPS 24 Class: . . . . . . . . . . . . . . . . . . . . . . . . ASME 150 Ends: . . . . . . . . . . . . . . . . . . . . . . . . Flanged RF Body: . . . . . . . . . . . . . . . . . . . . . . . . CS (ASTM A216-WCB) Trim: . . . . . . . . . . . . . . . . . . . . . . . . . API 594 TRIM 1 Hinge Pin: . . . . . . . . . . . . . . . . . . . . 410 SS Springs: . . . . . . . . . . . . . . . . . . . . . . Inconel X-750 Stop Pin: . . . . . . . . . . . . . . . . . . . . . 410 SS Body Type: . . . . . . . . . . . . . . . . . . . . Double Flanged Installation: . . . . . . . . . . . . . . . . . . . Horizontal - Hinge Pin Vertical or Vertical - Upward The standards are: DESIGN: API 594 Type A ENDS: ASME B16.5 RATING: ASME B16.34 TESTING: API 598 DIMENSIONAL: API 594

Description of CHECK Valve (CD01CB501): Type: . . . . . . . . . . . . . . . . . . . . . . . . Check Design Type: . . . . . . . . . . . . . . . . . . Dual Plate, Retainerless Valve Size: . . . . . . . . . . . . . . . . . . . . NPS 26 -to- NPS 48 Class: . . . . . . . . . . . . . . . . . . . . . . . . ASME 150 Ends: . . . . . . . . . . . . . . . . . . . . . . . . Flanged RF Body: . . . . . . . . . . . . . . . . . . . . . . . . CS (ASTM A216-WCB) Trim: . . . . . . . . . . . . . . . . . . . . . . . . . API 594 TRIM 1 Hinge Pin: . . . . . . . . . . . . . . . . . . . . 410 SS Springs: . . . . . . . . . . . . . . . . . . . . . . Inconel X-750 Stop Pin: . . . . . . . . . . . . . . . . . . . . . 410 SS Body Type: . . . . . . . . . . . . . . . . . . . . Double Flanged Installation: . . . . . . . . . . . . . . . . . . . Horizontal - Hinge Pin Vertical or Vertical - Upward The standards are: DESIGN: API 594 Type A ENDS: ASME B16.47 Series B RATING: ASME B16.34 TESTING: API 598 DIMENSIONAL: API 594



Description of CHECK Valve (CD01CB700): Type: . . . . . . . . . . . . . . . . . . . . . . . . Check Design Type: . . . . . . . . . . . . . . . . . . Dual Plate, Retainerless Valve Size: . . . . . . . . . . . . . . . . . . . . NPS 2 -to- NPS 24 Class: . . . . . . . . . . . . . . . . . . . . . . . . ASME 150 Ends: . . . . . . . . . . . . . . . . . . . . . . . . RF Body: . . . . . . . . . . . . . . . . . . . . . . . . CS (ASTM A216-WCB) Trim: . . . . . . . . . . . . . . . . . . . . . . . . . API 594 TRIM 1 Hinge Pin: . . . . . . . . . . . . . . . . . . . . 410 SS Springs: . . . . . . . . . . . . . . . . . . . . . . Inconel X-750 Stop Pin: . . . . . . . . . . . . . . . . . . . . . 410 SS Body Type: . . . . . . . . . . . . . . . . . . . . Wafer Installation: . . . . . . . . . . . . . . . . . . . Horizontal - Hinge Pin Vertical or Vertical - Upward The standards are: DESIGN: API 594 Type A ENDS: ASME B16.5 RATING: ASME B16.34 TESTING: API 598 DIMENSIONAL: API 594

Description of CHECK Valve (CD01CB701): Type: . . . . . . . . . . . . . . . . . . . . . . . . Check Design Type: . . . . . . . . . . . . . . . . . . Dual Plate, Retainerless Valve Size: . . . . . . . . . . . . . . . . . . . . NPS 26 -to- NPS 48 Class: . . . . . . . . . . . . . . . . . . . . . . . . ASME 150 Ends: . . . . . . . . . . . . . . . . . . . . . . . . RF Body: . . . . . . . . . . . . . . . . . . . . . . . . CS (ASTM A216-WCB) Trim: . . . . . . . . . . . . . . . . . . . . . . . . . API 594 TRIM 1 Hinge Pin: . . . . . . . . . . . . . . . . . . . . 410 SS Springs: . . . . . . . . . . . . . . . . . . . . . . Inconel X-750 Stop Pin: . . . . . . . . . . . . . . . . . . . . . 410 SS Body Type: . . . . . . . . . . . . . . . . . . . . Wafer Installation: . . . . . . . . . . . . . . . . . . . Horizontal - Hinge Pin Vertical or Vertical - Upward The standards are: DESIGN: API 594 Type A ENDS: ASME B16.47 Series B RATING: ASME B16.34 TESTING: API 598 DIMENSIONAL: API 594

Description of CHECK Valve (CD01CB702): Type: . . . . . . . . . . . . . . . . . . . . . . . . Check Design Type: . . . . . . . . . . . . . . . . . . Dual Plate, Retainerless Valve Size: . . . . . . . . . . . . . . . . . . . . NPS 2 -to- NPS 24 Class: . . . . . . . . . . . . . . . . . . . . . . . . ASME 150 Ends: . . . . . . . . . . . . . . . . . . . . . . . . RF Body: . . . . . . . . . . . . . . . . . . . . . . . . CS (ASTM A216-WCB) Trim: . . . . . . . . . . . . . . . . . . . . . . . . . API 594 TRIM 1 Hinge Pin: . . . . . . . . . . . . . . . . . . . . 410 SS Springs: . . . . . . . . . . . . . . . . . . . . . . Inconel X-750 Stop Pin: . . . . . . . . . . . . . . . . . . . . . 410 SS Body Type: . . . . . . . . . . . . . . . . . . . . Lugged Installation: . . . . . . . . . . . . . . . . . . . Horizontal - Hinge Pin Vertical or Vertical - Upward The standards are: DESIGN: API 594 Type A ENDS: ASME B16.5 RATING: ASME B16.34 TESTING: API 598 DIMENSIONAL: API 594




Description of CHECK Valve (CD03CA702): Type: . . . . . . . . . . . . . . . . . . . . . . . . Check Design Type: . . . . . . . . . . . . . . . . . . Dual Plate, Retainerless Valve Size: . . . . . . . . . . . . . . . . . . . . NPS 2 -to- NPS 24 Service: . . . . . . . . . . . . . . . . . . . . . . -46 to 343 °C (-50 to 650 °F) Class: . . . . . . . . . . . . . . . . . . . . . . . . ASME 300 Ends: . . . . . . . . . . . . . . . . . . . . . . . . RF Body: . . . . . . . . . . . . . . . . . . . . . . . . ITCS (ASTM A352-LCB or ASTM A352-LCC) Trim: . . . . . . . . . . . . . . . . . . . . . . . . . API 594 TRIM 10 Hinge Pin: . . . . . . . . . . . . . . . . . . . . 316 SS Springs: . . . . . . . . . . . . . . . . . . . . . . Inconel X-750 Stop Pin: . . . . . . . . . . . . . . . . . . . . . 316 SS Body Type: . . . . . . . . . . . . . . . . . . . . Lugged Installation: . . . . . . . . . . . . . . . . . . . Horizontal - Hinge Pin Vertical or Vertical - Upward The standards are: DESIGN: API 594 Type A ENDS: ASME B16.5 RATING: ASME B16.34 TESTING: API 598 DIMENSIONAL: API 594




Description of CHECK Valve (CD03CB501): Type: . . . . . . . . . . . . . . . . . . . . . . . . Check Design Type: . . . . . . . . . . . . . . . . . . Dual Plate, Retainerless Valve Size: . . . . . . . . . . . . . . . . . . . . NPS 26 -to- NPS 48 Class: . . . . . . . . . . . . . . . . . . . . . . . . ASME 300 Ends: . . . . . . . . . . . . . . . . . . . . . . . . Flanged RF Body: . . . . . . . . . . . . . . . . . . . . . . . . CS (ASTM A216-WCB) Trim: . . . . . . . . . . . . . . . . . . . . . . . . . API 594 TRIM 1 Hinge Pin: . . . . . . . . . . . . . . . . . . . . 410 SS Springs: . . . . . . . . . . . . . . . . . . . . . . Inconel X-750 Stop Pin: . . . . . . . . . . . . . . . . . . . . . 410 SS Body Type: . . . . . . . . . . . . . . . . . . . . Double Flanged Installation: . . . . . . . . . . . . . . . . . . . Horizontal - Hinge Pin Vertical or Vertical - Upward The standards are: DESIGN: API 594 ENDS: ASME B16.47 Series B RATING: ASME B16.34 TESTING: API 598 DIMENSIONAL: API 594







Description of CHECK Valve (CD06CA702): Type: . . . . . . . . . . . . . . . . . . . . . . . . Check Design Type: . . . . . . . . . . . . . . . . . . Dual Plate, Retainerless Valve Size: . . . . . . . . . . . . . . . . . . . . NPS 2 -to- NPS 24 Service: . . . . . . . . . . . . . . . . . . . . . . -46 to 343 °C (-50 to 650 °F) Class: . . . . . . . . . . . . . . . . . . . . . . . . ASME 600 Ends: . . . . . . . . . . . . . . . . . . . . . . . . RF Body: . . . . . . . . . . . . . . . . . . . . . . . . ITCS (ASTM A352-LCB or ASTM A352-LCC) Trim: . . . . . . . . . . . . . . . . . . . . . . . . . API 594 TRIM 10 Hinge Pin: . . . . . . . . . . . . . . . . . . . . 316 SS Springs: . . . . . . . . . . . . . . . . . . . . . . Inconel X-750 Stop Pin: . . . . . . . . . . . . . . . . . . . . . 316 SS Body Type: . . . . . . . . . . . . . . . . . . . . Lugged Installation: . . . . . . . . . . . . . . . . . . . Horizontal - Hinge Pin Vertical or Vertical - Upward The standards are: DESIGN: API 594 Type A ENDS: ASME B16.5 RATING: ASME B16.34 TESTING: API 598 DIMENSIONAL: API 594




Description of CHECK Valve (CD06CB501): Type: . . . . . . . . . . . . . . . . . . . . . . . . Check Design Type: . . . . . . . . . . . . . . . . . . Dual Plate, Retainerless Valve Size: . . . . . . . . . . . . . . . . . . . . NPS 26 -to- NPS 42 Class: . . . . . . . . . . . . . . . . . . . . . . . . ASME 600 Ends: . . . . . . . . . . . . . . . . . . . . . . . . Flanged RF Body: . . . . . . . . . . . . . . . . . . . . . . . . CS (ASTM A216-WCB) Trim: . . . . . . . . . . . . . . . . . . . . . . . . . API 594 TRIM 1 Hinge Pin: . . . . . . . . . . . . . . . . . . . . 410 SS Springs: . . . . . . . . . . . . . . . . . . . . . . Inconel X-750 Stop Pin: . . . . . . . . . . . . . . . . . . . . . 410 SS Body Type: . . . . . . . . . . . . . . . . . . . . Double Flanged Installation: . . . . . . . . . . . . . . . . . . . Horizontal - Hinge Pin Vertical or Vertical - Upward The standards are: DESIGN: API 594 Type A ENDS: ASME B16.47 Series B RATING: ASME B16.34 TESTING: API 598 DIMENSIONAL: API 594





Description of CHECK Valve (CL01CB500): Type: . . . . . . . . . . . . . . . . . . . . . . . . Check Design Type: . . . . . . . . . . . . . . . . . . Piston Lift Valve Size: . . . . . . . . . . . . . . . . . . . . NPS 0.5 -to- NPS 2 Class: . . . . . . . . . . . . . . . . . . . . . . . . ASME 150 Ends: . . . . . . . . . . . . . . . . . . . . . . . . Flanged RF Body: . . . . . . . . . . . . . . . . . . . . . . . . CS (ASTM A105 or ASTM A216-WCB) Cover/Bonnet: . . . . . . . . . . . . . . . . . . CS (ASTM A105 or ASTM A216-WCB) Trim: . . . . . . . . . . . . . . . . . . . . . . . . . API 602 TRIM 8 Cover/Bonnet Type: . . . . . . . . . . . . . Bolted Body-Bonnet Gaskets: . . . . . . . . . . . SS/Graphite Body-Bonnet Bolting: . . . . . . . . . . . . Bolts: API 602 Nuts: API 602 Installation: . . . . . . . . . . . . . . . . . . . Horizontal - Cover Up The standards are: DESIGN: API 602 ENDS: ASME B16.5 RATING: API 602 TESTING: API 598 DIMENSIONAL: ASME B16.10





Description of CHECK Valve (CL08CA300): Type: . . . . . . . . . . . . . . . . . . . . . . . . Check Design Type: . . . . . . . . . . . . . . . . . . Piston Lift Valve Size: . . . . . . . . . . . . . . . . . . . . NPS 0.5 -to- NPS 2 Service: . . . . . . . . . . . . . . . . . . . . . . -46 to 343 °C (-50 to 650 °F) Class: . . . . . . . . . . . . . . . . . . . . . . . . ASME 800 Ends: . . . . . . . . . . . . . . . . . . . . . . . . SW Body: . . . . . . . . . . . . . . . . . . . . . . . . ITCS (ASTM A350-LF2-CL-1 or ASTM A352-LCB or ASTM A352-LCC) Cover/Bonnet: . . . . . . . . . . . . . . . . . . ITCS (ASTM A350-LF2-CL-1 or ASTM A352-LCB or ASTM A352-LCC) Trim: . . . . . . . . . . . . . . . . . . . . . . . . . API 602 TRIM 10 Cover/Bonnet Type: . . . . . . . . . . . . . Bolted Body-Bonnet Gaskets: . . . . . . . . . . . SS/Graphite Body-Bonnet Bolting: . . . . . . . . . . . . Bolts: API 602 Nuts: API 602 Installation: . . . . . . . . . . . . . . . . . . . Horizontal - Cover Up The standards are: DESIGN: API 602 ENDS: ASME B16.11 RATING: API 602 TESTING: API 598 DIMENSIONAL: MFG STD

Description of CHECK Valve (CL08CB000): Type: . . . . . . . . . . . . . . . . . . . . . . . . Check Design Type: . . . . . . . . . . . . . . . . . . Piston Lift Valve Size: . . . . . . . . . . . . . . . . . . . . NPS 0.5 -to- NPS 2 Class: . . . . . . . . . . . . . . . . . . . . . . . . ASME 800 Ends: . . . . . . . . . . . . . . . . . . . . . . . . Threaded Body: . . . . . . . . . . . . . . . . . . . . . . . . CS (ASTM A105 or ASTM A216-WCB) Cover/Bonnet: . . . . . . . . . . . . . . . . . . CS (ASTM A105 or ASTM A216-WCB) Trim: . . . . . . . . . . . . . . . . . . . . . . . . . API 602 TRIM 8 Cover/Bonnet Type: . . . . . . . . . . . . . Bolted Body-Bonnet Gaskets: . . . . . . . . . . . SS/Graphite Body-Bonnet Bolting: . . . . . . . . . . . . Bolts: API 602 Nuts: API 602 Installation: . . . . . . . . . . . . . . . . . . . Horizontal - Cover Up The standards are: DESIGN: API 602 ENDS: ASME B1.20.1 RATING: API 602 TESTING: API 598 DIMENSIONAL: MFG STD



Description of CHECK Valve (CL08CB300): Type: . . . . . . . . . . . . . . . . . . . . . . . . Check Design Type: . . . . . . . . . . . . . . . . . . Piston Lift Valve Size: . . . . . . . . . . . . . . . . . . . . NPS 0.5 -to- NPS 2 Class: . . . . . . . . . . . . . . . . . . . . . . . . ASME 800 Ends: . . . . . . . . . . . . . . . . . . . . . . . . SW Body: . . . . . . . . . . . . . . . . . . . . . . . . CS (ASTM A105 or ASTM A216-WCB) Cover/Bonnet: . . . . . . . . . . . . . . . . . . CS (ASTM A105 or ASTM A216-WCB) Trim: . . . . . . . . . . . . . . . . . . . . . . . . . API 602 TRIM 8 Cover/Bonnet Type: . . . . . . . . . . . . . Bolted Body-Bonnet Gaskets: . . . . . . . . . . . SS/Graphite Body-Bonnet Bolting: . . . . . . . . . . . . Bolts: API 602 Nuts: API 602 Installation: . . . . . . . . . . . . . . . . . . . Horizontal - Cover Up The standards are: DESIGN: API 602 ENDS: ASME B16.11 RATING: API 602 TESTING: API 598 DIMENSIONAL: MFG STD


Description of CHECK Valve (CL15CB300): Type: . . . . . . . . . . . . . . . . . . . . . . . . Check Design Type: . . . . . . . . . . . . . . . . . . Piston Lift Valve Size: . . . . . . . . . . . . . . . . . . . . NPS 0.5 -to- NPS 2 Class: . . . . . . . . . . . . . . . . . . . . . . . . ASME 1500 Ends: . . . . . . . . . . . . . . . . . . . . . . . . SW Body: . . . . . . . . . . . . . . . . . . . . . . . . CS (ASTM A105 or ASTM A216-WCB) Cover/Bonnet: . . . . . . . . . . . . . . . . . . CS (ASTM A105 or ASTM A216-WCB) Trim: . . . . . . . . . . . . . . . . . . . . . . . . . API 602 TRIM 8 Cover/Bonnet Type: . . . . . . . . . . . . . Bolted Body-Bonnet Gaskets: . . . . . . . . . . . SS/Graphite Body-Bonnet Bolting: . . . . . . . . . . . . Bolts: API 602 Nuts: API 602 Installation: . . . . . . . . . . . . . . . . . . . Horizontal - Cover Up The standards are: DESIGN: API 602 ENDS: ASME B16.11 RATING: ASME B16.34 TESTING: API 598 DIMENSIONAL: MFG STD




Description of CHECK Valve (CS01CA500): Type: . . . . . . . . . . . . . . . . . . . . . . . . Check Design Type: . . . . . . . . . . . . . . . . . . Swing Valve Size: . . . . . . . . . . . . . . . . . . . . NPS 2 -to- NPS 24 Service: . . . . . . . . . . . . . . . . . . . . . . -46 to 343 °C (-50 to 650 °F) Class: . . . . . . . . . . . . . . . . . . . . . . . . ASME 150 Ends: . . . . . . . . . . . . . . . . . . . . . . . . Flanged RF Body: . . . . . . . . . . . . . . . . . . . . . . . . ITCS (ASTM A352-LCB or ASTM A352-LCC) Cover/Bonnet: . . . . . . . . . . . . . . . . . . ITCS (ASTM A352-LCB or ASTM A352-LCC) Trim: . . . . . . . . . . . . . . . . . . . . . . . . . API 594 TRIM 10 Hinge Pin: . . . . . . . . . . . . . . . . . . . . 316 SS Disc Washer, Disc Nut, Cotter Pin: . 316 SS Cover/Bonnet Type: . . . . . . . . . . . . . Bolted Body-Bonnet Gaskets: . . . . . . . . . . . SS/Graphite Body-Bonnet Bolting: . . . . . . . . . . . . Bolts: MFG STD Nuts: MFG STD Installation: . . . . . . . . . . . . . . . . . . . Horizontal - Cover Up or Vertical - Upward Flow The standards are: DESIGN: API 594 Type B ENDS: ASME B16.5 RATING: ASME B16.34 TESTING: API 598 DIMENSIONAL: ASME B16.10

Description of CHECK Valve (CS01CA501): Type: . . . . . . . . . . . . . . . . . . . . . . . . Check Design Type: . . . . . . . . . . . . . . . . . . Swing Valve Size: . . . . . . . . . . . . . . . . . . . . NPS 26 -to- NPS 48 Service: . . . . . . . . . . . . . . . . . . . . . . -46 to 343 °C (-50 to 650 °F) Class: . . . . . . . . . . . . . . . . . . . . . . . . ASME 150 Ends: . . . . . . . . . . . . . . . . . . . . . . . . Flanged RF Body: . . . . . . . . . . . . . . . . . . . . . . . . ITCS (ASTM A352-LCB or ASTM A352-LCC) Cover/Bonnet: . . . . . . . . . . . . . . . . . . ITCS (ASTM A352-LCB or ASTM A352-LCC) Trim: . . . . . . . . . . . . . . . . . . . . . . . . . API 594 TRIM 10 Hinge Pin: . . . . . . . . . . . . . . . . . . . . 316 SS Disc Washer, Disc Nut, Cotter Pin: . 316 SS Cover/Bonnet Type: . . . . . . . . . . . . . Bolted Body-Bonnet Gaskets: . . . . . . . . . . . SS/Graphite Body-Bonnet Bolting: . . . . . . . . . . . . Bolts: MFG STD Nuts: MFG STD Installation: . . . . . . . . . . . . . . . . . . . Horizontal - Cover Up The standards are: DESIGN: API 594, as applicable ENDS: ASME B16.47 Series B RATING: ASME B16.34 TESTING: API 598 DIMENSIONAL: ASME B16.10 (NPS 26 -to- NPS 36) MFG STD (NPS 38 -to- NPS 48)



Description of CHECK Valve (CS01CB500): Type: . . . . . . . . . . . . . . . . . . . . . . . . Check Design Type: . . . . . . . . . . . . . . . . . . Swing Valve Size: . . . . . . . . . . . . . . . . . . . . NPS 2 -to- NPS 24 Class: . . . . . . . . . . . . . . . . . . . . . . . . ASME 150 Ends: . . . . . . . . . . . . . . . . . . . . . . . . Flanged RF Body: . . . . . . . . . . . . . . . . . . . . . . . . CS (ASTM A216-WCB) Cover/Bonnet: . . . . . . . . . . . . . . . . . . CS (ASTM A216-WCB) Trim: . . . . . . . . . . . . . . . . . . . . . . . . . API 594 TRIM 1 Hinge Pin: . . . . . . . . . . . . . . . . . . . . 410 SS Disc Washer, Disc Nut, Cotter Pin: . 410 SS Cover/Bonnet Type: . . . . . . . . . . . . . Bolted Body-Bonnet Gaskets: . . . . . . . . . . . SS/Graphite Body-Bonnet Bolting: . . . . . . . . . . . . Bolts: API 594 Nuts: API 594 Installation: . . . . . . . . . . . . . . . . . . . Horizontal - Cover Up or Vertical - Upward Flow The standards are: DESIGN: API 594 Type B ENDS: ASME B16.5 RATING: ASME B16.34 TESTING: API 598 DIMENSIONAL: ASME B16.10

Description of CHECK Valve (CS01CB501): Type: . . . . . . . . . . . . . . . . . . . . . . . . Check Design Type: . . . . . . . . . . . . . . . . . . Swing Valve Size: . . . . . . . . . . . . . . . . . . . . NPS 26 -to- NPS 48 Class: . . . . . . . . . . . . . . . . . . . . . . . . ASME 150 Ends: . . . . . . . . . . . . . . . . . . . . . . . . Flanged RF Body: . . . . . . . . . . . . . . . . . . . . . . . . CS (ASTM A216-WCB) Cover/Bonnet: . . . . . . . . . . . . . . . . . . CS (ASTM A216-WCB) Trim: . . . . . . . . . . . . . . . . . . . . . . . . . API 594 TRIM 1 Hinge Pin: . . . . . . . . . . . . . . . . . . . . 410 SS Disc Washer, Disc Nut, Cotter Pin: . 410 SS Cover/Bonnet Type: . . . . . . . . . . . . . Bolted Body-Bonnet Gaskets: . . . . . . . . . . . SS/Graphite Body-Bonnet Bolting: . . . . . . . . . . . . Bolts: API 594 Nuts: API 594 Installation: . . . . . . . . . . . . . . . . . . . Horizontal - Cover Up The standards are: DESIGN: API 594, as applicable ENDS: ASME B16.47 Series B RATING: ASME B16.34 TESTING: API 598 DIMENSIONAL: ASME B16.10 (NPS 26 -to- NPS 36) MFG STD (NPS 38 -to- NPS 48)

Description of CHECK Valve (CS01CB550): Type: . . . . . . . . . . . . . . . . . . . . . . . . Check Design Type: . . . . . . . . . . . . . . . . . . Swing Valve Size: . . . . . . . . . . . . . . . . . . . . NPS 0.5 -to- NPS 12 Class: . . . . . . . . . . . . . . . . . . . . . . . . ASME 150 Ends: . . . . . . . . . . . . . . . . . . . . . . . . Flanged RF & Oversized Reducing Flange Body: . . . . . . . . . . . . . . . . . . . . . . . . CS (ASTM A216-WCB) Cover/Bonnet: . . . . . . . . . . . . . . . . . . CS (ASTM A216-WCB) Trim: . . . . . . . . . . . . . . . . . . . . . . . . . API 594 TRIM 1 Hinge Pin: . . . . . . . . . . . . . . . . . . . . 410 SS Disc Washer, Disc Nut, Cotter Pin: . 410 SS Cover/Bonnet Type: . . . . . . . . . . . . . Bolted Jacket Type: . . . . . . . . . . . . . . . . . . . Full Jacket - PIP PNF J8750 and FNPT Connections Body-Bonnet Gaskets: . . . . . . . . . . . SS/Graphite Body-Bonnet Bolting: . . . . . . . . . . . . Bolts: MFG STD Nuts: MFG STD Installation: . . . . . . . . . . . . . . . . . . . Horizontal The standards are: DESIGN: ASME B16.34 ENDS: ASME B16.5 RATING: ASME B16.34 TESTING: API 598 DIMENSIONAL: MFG STD



Description of CHECK Valve (CS03CA500): Type: . . . . . . . . . . . . . . . . . . . . . . . . Check Design Type: . . . . . . . . . . . . . . . . . . Swing Valve Size: . . . . . . . . . . . . . . . . . . . . NPS 2 -to- NPS 24 Service: . . . . . . . . . . . . . . . . . . . . . . -46 to 343 °C (-50 to 650 °F) Class: . . . . . . . . . . . . . . . . . . . . . . . . ASME 300 Ends: . . . . . . . . . . . . . . . . . . . . . . . . Flanged RF Body: . . . . . . . . . . . . . . . . . . . . . . . . ITCS (ASTM A352-LCB or ASTM A352-LCC) Cover/Bonnet: . . . . . . . . . . . . . . . . . . ITCS (ASTM A352-LCB or ASTM A352-LCC) Trim: . . . . . . . . . . . . . . . . . . . . . . . . . API 594 TRIM 10 Hinge Pin: . . . . . . . . . . . . . . . . . . . . 316 SS Disc Washer, Disc Nut, Cotter Pin: . 316 SS Cover/Bonnet Type: . . . . . . . . . . . . . Bolted Body-Bonnet Gaskets: . . . . . . . . . . . SS/Graphite Body-Bonnet Bolting: . . . . . . . . . . . . Bolts: MFG STD Nuts: MFG STD Installation: . . . . . . . . . . . . . . . . . . . Horizontal - Cover Up or Vertical - Upward Flow The standards are: DESIGN: API 594 Type B ENDS: ASME B16.5 RATING: ASME B16.34 TESTING: API 598 DIMENSIONAL: ASME B16.10

Description of CHECK Valve (CS03CA501): Type: . . . . . . . . . . . . . . . . . . . . . . . . Check Design Type: . . . . . . . . . . . . . . . . . . Swing Valve Size: . . . . . . . . . . . . . . . . . . . . NPS 26 -to- NPS 48 Service: . . . . . . . . . . . . . . . . . . . . . . -46 to 343 °C (-50 to 650 °F) Class: . . . . . . . . . . . . . . . . . . . . . . . . ASME 300 Ends: . . . . . . . . . . . . . . . . . . . . . . . . Flanged RF Body: . . . . . . . . . . . . . . . . . . . . . . . . ITCS (ASTM A352-LCB or ASTM A352-LCC) Cover/Bonnet: . . . . . . . . . . . . . . . . . . ITCS (ASTM A352-LCB or ASTM A352-LCC) Trim: . . . . . . . . . . . . . . . . . . . . . . . . . API 594 TRIM 10 Hinge Pin: . . . . . . . . . . . . . . . . . . . . 316 SS Disc Washer, Disc Nut, Cotter Pin: . 316 SS Cover/Bonnet Type: . . . . . . . . . . . . . Bolted Body-Bonnet Gaskets: . . . . . . . . . . . SS/Graphite Body-Bonnet Bolting: . . . . . . . . . . . . Bolts: MFG STD Nuts: MFG STD Installation: . . . . . . . . . . . . . . . . . . . Horizontal - Cover Up The standards are: DESIGN: API 594, as applicable ENDS: ASME B16.47 Series B RATING: ASME B16.34 TESTING: API 598 DIMENSIONAL: ASME B16.10 (NPS 26 -to- NPS 36) MFG STD (NPS 38 -to- NPS 48)




Description of CHECK Valve (CS03CB501): Type: . . . . . . . . . . . . . . . . . . . . . . . . Check Design Type: . . . . . . . . . . . . . . . . . . Swing Valve Size: . . . . . . . . . . . . . . . . . . . . NPS 26 -to- NPS 48 Class: . . . . . . . . . . . . . . . . . . . . . . . . ASME 300 Ends: . . . . . . . . . . . . . . . . . . . . . . . . Flanged RF Body: . . . . . . . . . . . . . . . . . . . . . . . . CS (ASTM A216-WCB) Cover/Bonnet: . . . . . . . . . . . . . . . . . . CS (ASTM A216-WCB) Trim: . . . . . . . . . . . . . . . . . . . . . . . . . API 594 TRIM 1 Hinge Pin: . . . . . . . . . . . . . . . . . . . . 410 SS Disc Washer, Disc Nut, Cotter Pin: . 410 SS Cover/Bonnet Type: . . . . . . . . . . . . . Bolted Body-Bonnet Gaskets: . . . . . . . . . . . SS/Graphite Body-Bonnet Bolting: . . . . . . . . . . . . Bolts: API 594 Nuts: API 594 Installation: . . . . . . . . . . . . . . . . . . . Horizontal - Cover Up The standards are: DESIGN: API 594, as applicable ENDS: ASME B16.47 Series B RATING: ASME B16.34 TESTING: API 598 DIMENSIONAL: ASME B16.10 (NPS 26 -to- NPS 36) MFG STD (NPS 38 -to- NPS 48)

Description of CHECK Valve (CS03CB550): Type: . . . . . . . . . . . . . . . . . . . . . . . . Check Design Type: . . . . . . . . . . . . . . . . . . Swing Valve Size: . . . . . . . . . . . . . . . . . . . . NPS 0.5 -to- NPS 12 Class: . . . . . . . . . . . . . . . . . . . . . . . . ASME 300 Ends: . . . . . . . . . . . . . . . . . . . . . . . . Flanged RF & Oversized Reducing Flange Body: . . . . . . . . . . . . . . . . . . . . . . . . CS (ASTM A216-WCB) Cover/Bonnet: . . . . . . . . . . . . . . . . . . CS (ASTM A216-WCB) Trim: . . . . . . . . . . . . . . . . . . . . . . . . . API 594 TRIM 1 Hinge Pin: . . . . . . . . . . . . . . . . . . . . 410 SS Disc Washer, Disc Nut, Cotter Pin: . 410 SS Cover/Bonnet Type: . . . . . . . . . . . . . Bolted Jacket Type: . . . . . . . . . . . . . . . . . . . Full Jacket - PIP PNF J8750 and FNPT Connections Body-Bonnet Gaskets: . . . . . . . . . . . SS/Graphite Body-Bonnet Bolting: . . . . . . . . . . . . Bolts: MFG STD Nuts: MFG STD Installation: . . . . . . . . . . . . . . . . . . . Horizontal The standards are: DESIGN: ASME B16.34 ENDS: ASME B16.5 RATING: ASME B16.34 TESTING: API 598 DIMENSIONAL: MFG STD

Description of CHECK Valve (CS06CA500): Type: . . . . . . . . . . . . . . . . . . . . . . . . Check Design Type: . . . . . . . . . . . . . . . . . . Swing Valve Size: . . . . . . . . . . . . . . . . . . . . NPS 2 -to- NPS 24 Service: . . . . . . . . . . . . . . . . . . . . . . -46 to 343 °C (-50 to 650 °F) Class: . . . . . . . . . . . . . . . . . . . . . . . . ASME 600 Ends: . . . . . . . . . . . . . . . . . . . . . . . . Flanged RF Body: . . . . . . . . . . . . . . . . . . . . . . . . ITCS (ASTM A352-LCB or ASTM A352-LCC) Cover/Bonnet: . . . . . . . . . . . . . . . . . . ITCS (ASTM A352-LCB or ASTM A352-LCC) Trim: . . . . . . . . . . . . . . . . . . . . . . . . . API 594 TRIM 10 Hinge Pin: . . . . . . . . . . . . . . . . . . . . 316 SS Disc Washer, Disc Nut, Cotter Pin: . 316 SS Cover/Bonnet Type: . . . . . . . . . . . . . Bolted Body-Bonnet Gaskets: . . . . . . . . . . . SS/Graphite Body-Bonnet Bolting: . . . . . . . . . . . . Bolts: API 594 Nuts: API 594 Installation: . . . . . . . . . . . . . . . . . . . Horizontal - Cover Up or Vertical - Upward Flow The standards are: DESIGN: API 594 Type B ENDS: ASME B16.5 RATING: ASME B16.34 TESTING: API 598 DIMENSIONAL: ASME B16.10



Description of CHECK Valve (CS06CA501): Type: . . . . . . . . . . . . . . . . . . . . . . . . Check Design Type: . . . . . . . . . . . . . . . . . . Swing Valve Size: . . . . . . . . . . . . . . . . . . . . NPS 26 -to- NPS 48 Service: . . . . . . . . . . . . . . . . . . . . . . -46 to 343 °C (-50 to 650 °F) Class: . . . . . . . . . . . . . . . . . . . . . . . . ASME 600 Ends: . . . . . . . . . . . . . . . . . . . . . . . . Flanged RF Body: . . . . . . . . . . . . . . . . . . . . . . . . ITCS (ASTM A352-LCB or ASTM A352-LCC) Cover/Bonnet: . . . . . . . . . . . . . . . . . . ITCS (ASTM A352-LCB or ASTM A352-LCC) Trim: . . . . . . . . . . . . . . . . . . . . . . . . . API 594 TRIM 10 Hinge Pin: . . . . . . . . . . . . . . . . . . . . 316 SS Disc Washer, Disc Nut, Cotter Pin: . 316 SS Cover/Bonnet Type: . . . . . . . . . . . . . Bolted Body-Bonnet Gaskets: . . . . . . . . . . . SS/Graphite Body-Bonnet Bolting: . . . . . . . . . . . . Bolts: API 594 Nuts: API 594 Installation: . . . . . . . . . . . . . . . . . . . Horizontal - Cover Up The standards are: DESIGN: API 594, as applicable ENDS: ASME B16.47 Series B RATING: ASME B16.34 TESTING: API 598 DIMENSIONAL: ASME B16.10 - Long Pattern (NPS 26 -to- NPS MFG STD (NPS 38 -to- NPS 48)


Description of CHECK Valve (CS06CB501): Type: . . . . . . . . . . . . . . . . . . . . . . . . Check Design Type: . . . . . . . . . . . . . . . . . . Swing Valve Size: . . . . . . . . . . . . . . . . . . . . NPS 26 -to- NPS 48 Class: . . . . . . . . . . . . . . . . . . . . . . . . ASME 600 Ends: . . . . . . . . . . . . . . . . . . . . . . . . Flanged RF Body: . . . . . . . . . . . . . . . . . . . . . . . . CS (ASTM A216-WCB) Cover/Bonnet: . . . . . . . . . . . . . . . . . . CS (ASTM A216-WCB) Trim: . . . . . . . . . . . . . . . . . . . . . . . . . API 594 TRIM 1 Hinge Pin: . . . . . . . . . . . . . . . . . . . . 410 SS Disc Washer, Disc Nut, Cotter Pin: . 410 SS Cover/Bonnet Type: . . . . . . . . . . . . . Bolted Body-Bonnet Gaskets: . . . . . . . . . . . SS/Graphite Body-Bonnet Bolting: . . . . . . . . . . . . Bolts: API 594 Nuts: API 594 Installation: . . . . . . . . . . . . . . . . . . . Horizontal - Cover Up The standards are: DESIGN: API 594, as applicable ENDS: ASME B16.47 Series B RATING: ASME B16.34 TESTING: API 598 DIMENSIONAL: ASME B16.10 - Long Pattern (NPS 26 -to- NPS MFG STD (NPS 38 -to- NPS 48)



Description of CHECK Valve (CS06CB800): Type: . . . . . . . . . . . . . . . . . . . . . . . . Check Design Type: . . . . . . . . . . . . . . . . . . Swing Valve Size: . . . . . . . . . . . . . . . . . . . . NPS 2 -to- NPS 24 Class: . . . . . . . . . . . . . . . . . . . . . . . . ASME 600 Ends: . . . . . . . . . . . . . . . . . . . . . . . . BW, Specify Wall Thickness Body: . . . . . . . . . . . . . . . . . . . . . . . . CS (ASTM A216-WCB) Cover/Bonnet: . . . . . . . . . . . . . . . . . . CS (ASTM A216-WCB) Trim: . . . . . . . . . . . . . . . . . . . . . . . . . API 594 TRIM 5 Hinge Pin: . . . . . . . . . . . . . . . . . . . . 410 SS Disc Washer, Disc Nut, Cotter Pin: . 410 SS Cover/Bonnet Type: . . . . . . . . . . . . . Bolted Body-Bonnet Gaskets: . . . . . . . . . . . SS/Graphite Body-Bonnet Bolting: . . . . . . . . . . . . Bolts: API 594 Nuts: API 594 Installation: . . . . . . . . . . . . . . . . . . . Horizontal - Cover Up or Vertical - Upward Flow The standards are: DESIGN: API 594 Type B ENDS: ASME B16.25 RATING: ASME B16.34 TESTING: API 598 DIMENSIONAL: ASME B16.10

Description of CHECK Valve (CS06CB801): Type: . . . . . . . . . . . . . . . . . . . . . . . . Check Design Type: . . . . . . . . . . . . . . . . . . Swing Valve Size: . . . . . . . . . . . . . . . . . . . . NPS 26 -to- NPS 48 Class: . . . . . . . . . . . . . . . . . . . . . . . . ASME 600 Ends: . . . . . . . . . . . . . . . . . . . . . . . . BW, Specify Wall Thickness Body: . . . . . . . . . . . . . . . . . . . . . . . . CS (ASTM A216-WCB) Cover/Bonnet: . . . . . . . . . . . . . . . . . . CS (ASTM A216-WCB) Trim: . . . . . . . . . . . . . . . . . . . . . . . . . API 594 TRIM 5 Hinge Pin: . . . . . . . . . . . . . . . . . . . . 410 SS Disc Washer, Disc Nut, Cotter Pin: . 410 SS Cover/Bonnet Type: . . . . . . . . . . . . . Bolted Body-Bonnet Gaskets: . . . . . . . . . . . SS/Graphite Body-Bonnet Bolting: . . . . . . . . . . . . Bolts: API 594 Nuts: API 594 Installation: . . . . . . . . . . . . . . . . . . . Horizontal - Cover Up The standards are: DESIGN: API 594, as applicable ENDS: ASME B16.25 RATING: ASME B16.34 TESTING: API 598 DIMENSIONAL: ASME B16.10 - Long Pattern (NPS 26 -to- NPS MFG STD (NPS 32 -to- NPS 48)




Description of CHECK Valve (CS09CB800): Type: . . . . . . . . . . . . . . . . . . . . . . . . Check Design Type: . . . . . . . . . . . . . . . . . . Swing Valve Size: . . . . . . . . . . . . . . . . . . . . NPS 3 -to- NPS 24 Class: . . . . . . . . . . . . . . . . . . . . . . . . ASME 900 Ends: . . . . . . . . . . . . . . . . . . . . . . . . BW, Specify Wall Thickness Body: . . . . . . . . . . . . . . . . . . . . . . . . CS (ASTM A216-WCB) Cover/Bonnet: . . . . . . . . . . . . . . . . . . CS (ASTM A216-WCB) Trim: . . . . . . . . . . . . . . . . . . . . . . . . . API 594 TRIM 5 Hinge Pin: . . . . . . . . . . . . . . . . . . . . 410 SS Disc Washer, Disc Nut, Cotter Pin: . 410 SS Cover/Bonnet Type: . . . . . . . . . . . . . Pressure Seal Body-Bonnet Gaskets: . . . . . . . . . . . MFG STD Body-Bonnet Bolting: . . . . . . . . . . . . Bolts: MFG STD Nuts: MFG STD Installation: . . . . . . . . . . . . . . . . . . . Horizontal - Cover Up or Vertical - Upward Flow The standards are: DESIGN: ASME B16.34 and MSS SP-144 ENDS: ASME B16.25 RATING: ASME B16.34 TESTING: API 598 DIMENSIONAL: ASME B16.10 - Short Pattern (NPS 3 -to- NPS 16) MFG STD (NPS 18 -to- NPS 24)


Description of CHECK Valve (CS15CB800): Type: . . . . . . . . . . . . . . . . . . . . . . . . Check Design Type: . . . . . . . . . . . . . . . . . . Swing Valve Size: . . . . . . . . . . . . . . . . . . . . NPS 3 -to- NPS 24 Class: . . . . . . . . . . . . . . . . . . . . . . . . ASME 1500 Ends: . . . . . . . . . . . . . . . . . . . . . . . . BW, Specify Wall Thickness Body: . . . . . . . . . . . . . . . . . . . . . . . . CS (ASTM A216-WCB) Cover/Bonnet: . . . . . . . . . . . . . . . . . . CS (ASTM A216-WCB) Trim: . . . . . . . . . . . . . . . . . . . . . . . . . API 594 TRIM 5 Hinge Pin: . . . . . . . . . . . . . . . . . . . . 410 SS Disc Washer, Disc Nut, Cotter Pin: . 410 SS Cover/Bonnet Type: . . . . . . . . . . . . . Pressure Seal Body-Bonnet Gaskets: . . . . . . . . . . . MFG STD Body-Bonnet Bolting: . . . . . . . . . . . . Bolts: MFG STD Nuts: MFG STD Installation: . . . . . . . . . . . . . . . . . . . Horizontal - Cover Up or Vertical - Upward Flow The standards are: DESIGN: ASME B16.34 and MSS SP-144 ENDS: ASME B16.25 RATING: ASME B16.34 TESTING: API 598 DIMENSIONAL: ASME B16.10 - Short Pattern (NPS 3 -to- NPS 16) MFG STD (NPS 18 -to- NPS 24)

Carbon Steel Check Valve Descriptions

Documents

Transcript of Carbon Steel Check Valve Descriptions