Caravan Prospekt 2010 GB HKG

Hella Product Overview

Caravans and Motor Homes

Intensive SupportCustomized SolutionsInnovative TechnologiesOur Ideas,Your Success.

Ideas today forthe cars of tomorrow

Frontlighting

DynaView® Evo2 Page 11

Daytime running light Page 12 – 13

90 mm low beam headlights and spotlights Page 14 – 19

90 mm fog light and daytime running lights Page 20

50 mm headlights Page 21

Micro DE headlights Page 22

Indicator and position lights Page 23 – 26

Headlight cleaning systems Page 27

Rear lighting

Combination rearlights Page 29 – 39

Clearance lights Page 40 – 41

Safety stoplights Page 42 – 43

Reflectors Page 43 – 44

number plate lights Page 44 – 45

Side lighting

Side marker lights Page 47 – 48

Auxiliary indicators Page 49

Interior lighting

Ceiling lights Page 51 – 56

Orientation lights Page 57 – 59

Reading lights Page 60

Ambient lights Page 61

Accessories

Rear view camera system RVS-1 Page 63

Intelligent Battery Sensor Page 64 – 65

Switches, plugs, sockets Page 66 – 67

Battery chargers Page 66

Hazard warning lights Page 67

Hand lamps Page 67

Boxes of spare bulbs Page 67

3

Freedom without Hassle

Those who travel by caravan or motor home want to experience

independence and do their own thing.

Those who develop, design and produce these homes on

wheels have to set technological and design trends with every

new model series.

Those who have Hella on board as a partner have boundless

possibilities – as developers, manufacturers and users. Because

Hella means complete freedom – without any risky adventures.

Innovative . Modular concepts.

Technological leadership.

Hella has built up a leading global position through diligence,

creativity and precise quality. Over more than one hundred

years. Hella and modern caravanning – a permanently

successful relationship.

� More safety thanks to innovations in lighting technology e.g.

Xenon and LED.

� More effi ciency thanks to integrated electric and electronic

components.

� More equipment versions, more brand characteristics and

more trendsetting thanks to the exceptionally deep range of

products and modular systems.

� More safety in production and use thanks to Original

Equipment quality, synergies from our developments for the

international automotive industry and zero tolerance quality

management.

Local Hella support.

We don’t only see ourselves as a quality supplier, but also as a

development partner. If required, our developers and engineers

can work on the optimum solution for your application with your

0wn teams. This speeds up workfl ows and clears the way for

new standards. More technological freedom, more styling

freedom, more room for rationalisation: That is Hella.

Have a good trip to the future.

4

We are the 100% service provider for innovative individual customizing. And for 100 % reliability.

New dimensions in the lighting segment:

After decades of standard solutions, Hella continually broke new

ground – and became the Number 1 for customer-specifi c

solutions. The lead is growing. Because there are future-proof

solutions available that only Hella has to off er. We are able to

cover applications for all global brands thanks to work done in

our own lighting laboratory.

New dimensions in the fi eld of modular concepts:

Engineers, designers and controllers are equally delighted with

our modular system. It provides you with the whole spectrum of

design possibilities – from futuristic through dynamic, sporty,

business-like, elegant, classic to retro.

In our range, you will fi nd the solution no-one else can off er. At

Hella you can fall back on the entire spectrum of lighting

technology for headlights and other lights: halogen, Bi-

Halogen®, Xenon, Bi-Xenon®, LED, light guides, ellipsoid,

FreeForm FF. You tell us the installation opening and decide on

the design, we construct your module. In small series too, of

course.

New dimensions of modular speed:

We want to be faster than everyone else. An optimised Time-to-

Market process from the fi rst lines on a notebook through to

series delivery allows us to realise your individual design in no

time.

New dimensions in the fi eld of electrics and electronics:

Hella covers the whole range of possibilities. From technical

modern standard solutions to individual application

development. And we remain true to our motto “More safety and

more comfort” Hella off ers the combination of safety stoplight

and rear view camera in one solution, as well as applications for

closing and locking aids for storage compartment fl aps and

caravan doors. Also new: The switch generation with 6,000

lasering and illumination possibilities.

So take us with you on your journey to the future.

Because like you, we love real freedom.

5

1965 1973 1978 1986

Hella universal 2-chamber combination

rearlight series 1305 with lens reflectors

using bulb technology in the smallest

conceivable design.

Further development of the 3-chamber

combination rearlight series. The 1131

series is launched, in a very progressive

design for the time.

The Hella universal 3-chamber

combination rearlight series 1140 –

designed as a surface-mounted solution

for towed vehicles such as trailers –

becomes the lighting standard for

caravans.


combination rearlight series 4460 as

surface-mounted solution with lens

pattern becomes established. The

design size increases in line with the

more stringent safety requirements for

more light output.

2002 2003 2004 2005

The Caraluna success story continues.

The first Hella-specific light with pattern-

free lens for caravans and motor homes

is launched - Caraluna II for horizontal

surface-mounting.

Customer-specific multi-function light

Fendt Caravan with chrome effect thanks

to the use of a transparent lens with

high-sheen vapour-plated reflectors.

The Caraluna II success story unfolds

further: The Caraluna II with chrome

effect, with transparent lens and high-

sheen vapour-plated reflectors is

launched on the market.

Modular light series Agroluna for

individual and combined lights with

pattern-free lenses and bulb-based

technology is launched. Customer-

specific multi-function light Bürstner

and Chateau.

Quick trip to the past

As early as in the 19th century, the fi rst “touring cars” appeared. The sometimes quite luxuriously equipped predecessors of the

modern caravan were invented in Britain. Initially they were horse-drawn, but shortly after the invention of the motor vehicle the fi rst

petrol-driven coaches were hitched to the travel cars. For more than one hundred years now, there has been a close relationship

between Hella and motor vehicles, including caravans and motor homes. Here is a quick look at our most recent past.

6

1989 1996 1998 2000


combination rearlight series 6459 with

lens pattern finds its way into the

caravan industry. The light sweep allows

it to be flush-mounted near the outer

edges. This design effect gives a whole

new dimension to motor home and

caravan contours.

Birth of the first multi-function light for

the motor home and caravan branch. As

well as integrating all the light functions,

the triangular reflector required is also

integrated in horizontal installation

position. The Hella Caraluna I becomes a

sign of quality and brand recognition for

a whole branch.

The modular light series 122 mm for

individual and combined lights is

launched. The series undergoes

permanent further development in the

next few years through pattern-free lights

and LED lights.

The customer-specific multi-function light

with pattern-free lens adorns hobby

caravans.

2006 2008 2009 2010

Customer-specific developments for

hobby caravans and motor homes,

Hymer motor homes and Fendt caravans

and motor homes. Upgrade Caraluna

multi-function light series: Caraluna II

Plus with combined indicator/reverse

light.

Ongoing development of a success

story: The Caraluna family is extended by

the Caraluna Modular for vertical flush-

mounting. Pattern-free and coloured lens

with modular reflector inserts, which

allow a customised appearance,

realisation with bulb-based or LED

technology and horizontal flush-

mounting.

Upgrade round light 122 mm in LED and

extension of the Caraluna family:

Caraluna Vertical with chrome effect.

Hella matches the lighting technology

inside the light to the flowing body

design. A ring-shaped 3D body around

the edge which generates a “glowing

look” thanks to the use of forward-

looking LED technology takes over the

taillight function and gives the rear end of

the new Fendt Brilliant a unique and

unmistakable appearance.

7

Versatile technical possibilities through LEDs

Depending on product requirements or customer wishes, Hella uses LEDs in diff erent optical

lighting systems. Here are some examples of rear lights:

Direct light � Spot-like appearance

� No optical system necessary

� Max. distance between 2 LEDs =

15 mm

Fresnel systems � Suitable for all functions

� Homogeneous appearance

Refl ector with pattern/

lens without pattern

� Highly effi cient

� Brilliant-fi nish appearance

� Elongated appearance

� Homogeneous illumination

� Can be adapted to curved vehicle

contours

More design freedom through LEDs

The use of LEDs gives design engineers much greater freedom

in design. Ergonomic aspects can be implemented more easily.

8

LED indicators and the patented failure check

Legal requirement in all ECE states

In the case of vehicles approved for use on public roads, the

indicators must be monitored: the failure of an indicator must be

shown optically or acoustically in the vehicle. This applies in all

ECE states. This means possible indicator failure must be

monitored by the vehicle. Manufacturers use diff erent control

systems for this. The failure checks currently in use cannot

detect simple LED lights and indicate a fault. All Hella LED

indicators have integrated electronics for the failure check. The

indicators are self-monitoring. They generate an impulse that is

evaluated by the electronic ballast. This ballast simulates a 21 W

bulb, which makes operation with conventional fl asher units

possible.

As soon as one single LED fails, the light can be considered

faulty, the impulse is not generated. The ballast then switches

the bulb simulation off and the fl asher unit indicates a fault to the

vehicle driver.

Safe conversion to LED indicators is now possible using

patented Hella electronics.

Hella supplies electronic ballasts for all Hella LED indicators

which makes it possible to convert the indicator failure display

for various vehicles. This is necessary if the vehicle manufacturer

does not guarantee indicator bulb failure checking via the vehicle

electric system.

The method is patented by Hella. At the moment there are three

diff erent ballasts and several diff erent LED indicator types

available.

LED-light failure check and correct electrical connection

Operation of the LED light with AC voltage or synchronised

DC voltage is not permitted. The individual light functions

may only be operated with a vehicle fuse of max. 3 A.

On account of the low Watt power of LED lights, which

distinguishes them signifi cantly from fi lament bulb versions,

there can be problems with the bulb failure check during

operation on diff erent traction vehicles. As checking of the

indicators is required by law, we recommend operating the

light only in conjunction with the indicator control unit, Hella

part no. 5DS 009 552-... .

In addition, further lighting functions are detected by some

traction vehicles. This is a vehicle comfort function which is

not required by legislation and does not release drivers from

their obligation to see for themselves that the lighting

equipment is working. Here, too, faulty diagnosis can occur

on account of the low power levels involved (instrument

panel in the driver cab indicates light failure although the

function is working).

If faulty diagnoses such as the ones described above occur

during operation of your traction vehicle type, please contact

the vehicle manufacturer.

9

Frontlighting

DynaView® Evo2 Page 11

Daytime running light Page 12 – 13

90 mm low beam headlights and spotlights Page 14 – 19

90 mm fog light and daytime running lights Page 20

50 mm headlights Page 21

Micro DE headlights Page 22

Indicator and position lights Page 23 – 26

Headlight cleaning systems Page 27

10

DynaView® Evo2

A new lighting era

DynaView® Evo2 combines the safety functions cornering light

and fog light in compact round auxiliary lights which can be

installed on a large number of vehicles.

When the low beam is switched on, the right or left cornering

light is activated automatically and immediately when the

indicator is actuated or when the vehicle drives round a bend at

a speed of less than 40 km/h.

A yaw rate sensor measures the vehicle's angular acceleration

and triggers the turn-on signal when the car drives through a

curve. At the end of the curve, a dimmer softly fades the extra

light. If the reverse gear is engaged, both cornering lights are

switched on and ensure broad and bright illumination of the

areas along the left and right of the vehicle.

“The cornering light is

switched off during normal

driving situations on a straight

stretch of road”

“When turning a corner or

driving slowly through a curve

(at a speed less than 40

km/h), the cornering light is

turned on automatically.”

“When driving round a bend at

a speed of up to 40 km/h, the

respective headlight is

switched on automatically.”

“In foggy conditions, the

cornering light can be

switched on manually (both

sides) as a fog light.”

DynaView® Evo 2 inc. H7 bulb

with holding bracket, 12 V

Set inc. control electronics 1N0 009 295-801

individual left 1N0 009 295-011

individual right 1N0 009 295-021

Type approval 1951

Connector plug set

DynaView® Evo2

for 20 headlights 8JD 156 151-807

11

Fro

nt

lig

hti

ng

Daytime running light

LED daytime running light set, rectangular design

2 lights inc. harness, universal bracket,

3 high-performance LEDs per light, multi-voltage 9-33 V

12 V/max. 5.5 W, current consumption = 2.18 A

Set for surface-mounting 2PT 009 496-801

Individual light without bracket, DRL with PO

function

2PT 009 496-007

Type approval 2344

Advantages of daytime running light

Daytime running light provides a decisive safety advantage in

road traffi c and reduces the number of accidents which result in

serious injuries by 58%*.

For this reason, and long before the introduction of any legal

requirement, Hella has developed daytime running lights to

increase driving safety.

Daytime running lights provide more safety than low

beam.

The Hella daytime running lights generate a passively radiating

white signal light. Vehicles are seen more quickly and better by

other road users. Which means Hella makes the crucial

diff erence in increasing reaction time and creates a clear safety

lead.

* Study carried out by the SWOV-Institute for Road Safety Research on behalf of the EU.

Comparison of performance between low beam and daytime running light

Diesel-driven passenger carPetrol-driven passenger car

0.207

0.052

0.021

0.15

0.036

0.014

Saving and

4-times more light!90 %

Saving and

4-times more light!90 %

Low beam during the day

Daytime running light with bulbs

Daytime running light with LEDs

Source: BAST (Bundesanstalt für Straßenwesen - Federal Institute for Roadways)

12

Daytime running light

LED daytime running light set LEDayLine® with position light function

2 lights with five LED diodes per light and integrated relay for fully automatic

switch-on, inc. professional harness and attachment material, multi-voltage

9-32 V

12 V max. 5.5 W, current consumption = approx. 0.36 A


12 V, left 2PT 010 043-011

12 V, right 2PT 010 043-021

Type approval 2578

LED daytime running light LEDayFlex

Adaptation to the vehicle contour within the context of type-approved surface-

mounted systems, extremely flat module design height (Ø 30 mm, depth

22.3 mm), modern design combined with LED power, 30 x longer service life

than H7 bulbs, high-performance LEDs for best light output, lights up

automatically when ignition is switched on.

5 light modules daytime running light 2PT 010 458-801

5 light modules daytime running light/position light* 2PT 010 458-811

Type approval 5852

Vehicle-specific finisher, black

(only for daytime running light)

Suitable for Fiat Ducato, Citroen Jumper, Peugeot

Boxer. Inc. connection harness, installation material

and installation instructions.

2PT 010 043-811

LED daytime running lights set, round design

2 lights inc. harness, universal bracket,

3 high-performance LEDs per light, multi-voltage 9-33 V

12 V/max. 5.5 W, current consumption = 2.18 A


Individual light

without bracket, left 2PT 009 599-011

without bracket, right 2PT 009 599-021

without bracket, with PO function, left 2PT 009 599-031

without bracket, with PO function, right 2PT 009 599-041

Universal carrier frame 9AH 165 968-001

Type approval 2372

Find out more about further variants, legal requirements and fitting regulations at www.daytime-running-light.com or www.hella.com/lightshow.

* When LEDayFlex is used as a position light, the standard position light must be disabled in accordance with ECE-R 48.

13

Fro

nt

lig

hti

ng

Comparison between halogen and Xenon low beam

Product photo Description Light distribution

Ha

log

en

Classic

Halogen low beam

Page 18

Premium

Halogen and

Bi-Halogen®

Low beam

Page 16

Performance

Halogen low beam

Page 17

Xe

no

n

Classic

Xenon low beam

Page 18

Classic

Bi-Xenon® Low beam

Page 18

Premium

Bi-Xenon® Low beam

Page 16

14

Comparison between halogen and Xenon spotlight

Product photo Description Light distribution

Ha

log

en

Classic

Halogen spotlight

Page 18

Premium

Bi-Halogen® spotlight

Page 16

Performance

Halogen spotlight

Page 17

Xe

no

n

Classic

Xenon spotlight

Page 18

Classic

Bi-Xenon® spotlight

Page 18

Premium

Bi-Xenon® spotlight

Page 16

15

Fro

nt

lig

hti

ng

90 mm Premium

Bi-Xenon headlight

Low beam headlight and spotlight, 12 V

Xenon low beam headlight and spotlight in one lamp unit, Xenon low beam light

only permitted with headlight range adjustment and lens cleaning system.

Right-hand traffic, D2S, ECE

Right-hand traffic, D2S, ECE 1AL 009 997-001

Left-hand traffic, D2S, ECE 1LL 009 997-011

Right-hand traffic, D2S, SAE 1AL 009 997-021

Type approval 2484 and 2485

Bi-halogen headlight

Low beam headlight and spotlight, 12 V

Halogen low beam headlight and spotlight in one lamp unit.

Right-hand traffic, H7, ECE 1AL 009 998-001

Left-hand traffic, H7, ECE 1LL 009 998-011

Right-hand traffic, H9, SAE 1AL 009 998-021


Halogen low beam headlight, 12 V

Metal reflectors with clear DE lens. Ideal in combination with the

matching spotlights and fog lights. Inc. light source.

Right-hand traffic, H7, ECE 1BL 009 999-001

Left-hand traffic, H7, ECE 1ML 009 999-011

Right-hand traffic, H7, SAE 1BL 009 999-021


High-end illumination Low beam and high beam from a single headlight module, choice of Xenon or halogen technology. Pattern-free

glass cover lens. High-quality aluminium refl ector. With Xenon, waterproof ballast. Connection using 0.5 metre shielded supply cable

with detachable plug-type connection.

Would you like to combine modules of the Premium and Performance series

without having to commit yourself right at the start of the vehicle design

process?

Then use the tried-and-trusted Premium carrier frame structure as a basis.

This is compatible for the future, too.

Alongside the complete Premium range, the following modules of the

Performance series can also be used.

InformationModule attachment

90 mm spotlight with PO, 12 V bulb,

right-hand traffic

1KO 247 043-117

90 mm spotlight 12 V bulb,

right-hand traffic

1KO 247 043-127

90 mm low beam headlight with 12 V bulb,

right-hand traffic

1BL 247 042-117

Connector for H1 bulb low beam headlight 8JD 156 151-807

Connector PO for spotlight module 8JD 156 150-807

16

90 mm Performance

Optimised illumination. Modules in enhanced quality for use on long journeys.

With splashwater-proof plug-type connector.

Halogen low beam headlight, 12 V

Module headlight with aluminium reflector and clear DE lens behind pattern-free

glass cover lens

Right-hand traffic, H1 1BL 247 042-007*

1BL 247 042-001*

Left-hand traffic, H1 1BL 247 042-027*

1BL 247 042-021*

Type approval 2397

* Right-hand traffic variant can be switched from asymmetrical low beam

to symmetrical light.

Left-hand traffic variant can be switched from symmetrical to asymmetrical.

Halogen spotlight, 12 V

Module headlight with aluminium FF reflector and clear DE lens behind

pattern-free glass cover lens

with position light, H1 1K0 247 043-007

1K0 247 043-001

without position light 1K0 247 043-017

1K0 247 043-011

Type approval 2397

If you have been using Classic modules so far, you can easily upgrade these to

Performance modules.

The following Performance modules have the same module attachment as the

Classic modules and can thus be used for compatible and straightforward

replacement – without having to modify the existing Classic carrier frame

structure first.

InformationModule attachment

90 mm spotlight with PO, 12 V bulb,

right-hand traffic

1KO 247 043-157

90 mm spotlight 12 V bulb,

right-hand traffic

1KO 247 043-167

90 mm low beam headlight with 12 V bulb,

right-hand traffic

1BL 247 042-217

Connector for H1 bulb low beam headlight 8JD 156 151-807

Connector PO for spotlight module 8JD 156 150-807

17

Fro

nt

lig

hti

ng

90 mm Classic

Bi-Xenon headlight, 12 V

Low beam headlight and spotlight in one lamp unit

Module headlight with integrated ignition unit and pattern-free glass cover lens.

High-quality metal reflector. Waterproof Xenon electronic ballast. 1 metre

shielded supply cable with detachable plug-type connections.

Right-hand traffic 1AL 008 934-001*

Left-hand traffic 1LL 008 934-011*

SAE (USA) right-hand traffic 1AL 008 934-041

Type approval 1677

Accessories for Bi-Xenon

Plug for ballast 8JA 990 295-127

Plug for switching spotlight 8JD 162 211-801

* Right-hand traffic variant can be switched from asymmetrical low beam

to symmetrical light.

Left-hand traffic variant can be switched from symmetrical to asymmetrical.

Low beam headlight, 12 V

Module headlight with pattern-free glass cover lens,

magnesium reflectors and clear DE lens

Xenon low beam headlight

D2S 1BL 008 194-007

Left-hand traffic, D2S 1LL 008 194-037

D2S, USA version 1BL 008 194-047

Type approval 917

Halogen low beam headlight

H7, right-hand traffic 1BL 008 193-001

Left-hand traffic 1LL 008 193-117

H9, USA version 1BL 008 193-021

Type approval 917

Spotlight, 12 V

Module headlight with magnesium FF reflectors and pattern-free glass cover

lens

Xenon spotlight

with position light 1K0 008 192-007


Type approval 917

Halogen spotlight

with position light 1K0 008 191-001


with position light, USA version 1K0 008 191-131

without position light, USA version 1K0 008 191-051

Type approval 917

(H7)

143 (H9)

18

Actuator motors for Premium headlight range adjustment

for 12 V halogen headlights 6NM 007 282-221

for 12 V Xenon headlights 6NM 007 282-231

Classic connector plug set

H9 008 191-... and 008 193-..., for USA version


90 mm Accessories

Classic carrier frame

for low beam headlights

and spotlights

9AH 157 659-007

Rubber caps

for 90 mm halogen H7, Classic

Low beam headlight 008 193-..., non-ventilated

flat version for angled plugs 9GH 152 654-012

deep version for female connector housing 9GH 145 943-012

Rubber caps

for 90 mm halogen H7, Classic

Spotlight 008 191-... ventilated

flat version for angled plugs 9GH 152 654-007

deep version for female connector housing 9GH 145 943-001

Halogen H9:

Sealed through connector plug system, no cap required

Connector plug set

Performance and Classic spotlights with

position light

for position light, for

20 headlights

8JD 156 150-807

Connector plug set

Premium, Performance and Classic for Xenon

ballasts, halogen, bi-halogen and DynaView® Evo2


Premium carrier frame

coated black 9AH 169 580-011

Performance carrier frame

coated black 9AH 254 228-017

Actuator motors for Classic headlight range adjustment

for 12 V halogen headlights 6NM 007 282-227

for 12 V Xenon headlights 6NM 007 282-231

19

Fro

nt

lig

hti

ng

90 mm Fog and Daytime Running Light

Fog light 90 mm, 12 V

Minimum installation dimensions for a discreetly convincing lighting design.

Aluminium reflectors with clear lens. Ideal in combination with the matching

90 mm spotlights and low beam headlights.

Halogen fog light 1N0 008 582-007

Accessories: rubber cap

for fog lights 9GH 158 051-007

Type approval 1342

ECE R19 B series-02, B series-03

90 mm daytime running light

Module headlight with pattern-free glass cover lens, 12 V with P21W Longlife

bulb and Kartoval® LED

with daytime running light/position light 2BE 010 102-101

Type approval 2586


Module headlight with pattern-free glass cover lens, 12 V with H15,

55 W / 15 W bulb, with carrier frame

with daytime running light/spotlight 1F0 010 293-001

Type approval 2680


Module headlight with pattern-free glass cover lens, 12 V with H15,

55 W / 15 W bulb, with carrier frame

with daytime running light/fog light 1N0 010 294-001

Type approval 2681

20

50 mm Premium

Low beam headlight, 12 V

Installation frame for 3-point attachment, adjustable from the front and rear

Xenon

Right-hand traffic, D2S 1BL 009 071-047

Left-hand traffic, D2S 1ML 009 071-057

Halogen

Right-hand traffic, H7 1BL 009 071-007

Left-hand traffic, H7 1ML 009 071-017


Spotlight, 12 V

3-point holder, adjustable using setting screw

Xenon

rear carrier frame is not included in the scope of

supply (see accessories), D2S

1F0 008 390-317

Type approval 1120

Halogen

H9 1KL 009 486-001

Type approval 2198

Fog light, 12 V

3-point holder, adjustable using setting screw, rear carrier frame is not included

in the scope of supply (see accessories)

H7 1NL 008 090-317

Type approval 877

Carrier frame (not for halogen spotlights)

a) without LWR holder 9AH 161 786-017

a) with LWR holder 9AH 161 784-017

Plastic cap

for fog lights 6NM 007 282-227

Rubber cap

a) for halogen low beam headlights 9GH 152 654-007

b) for fog lights 9GH 147 009-007

Actuator motors for headlight range adjustment

for 12 V halogen 6NM 007 282-221

for 12 V Xenon 6NM 007 282-231

Connector plug set

Rubber cap for 20 headlights 8JD 156 150-807

H9 plug for 20 headlights 8JD 158 175-807

Accessories for 50 mm headlight modules

a) b) a) b)

21

Fro

nt

lig

hti

ng

Micro DE headlights

Micro DE Premium Edition: fog light

Fog light set

with 12 V bulbs, with remote switching system and

aluminium design finisher

1NL 008 090-871

Individual fog light

with 12 V bulbs, aluminium design finisher 1NL 008 090-301

Type approval 877, ECE R19 B series 02

Micro DE Premium Edition: Xenon spotlight

Ref. 17.5, 12 V, black housing colour, inc. D2S Xenon bulb and

electronic ballast, aluminium design finisher

Set 1F0 008 390-821

Individual 1F0 008 390-301

Type approval 1120

DE Xenon

DE spotlight set, with black decorative rings, gas discharge lamps and 12 V

ballast

Spotlight set 1F0 008 390-801

Type approval 1120

Micro DE

Fog light set

with black decorative ring 1NL 008 090-821

with universal radio remote control and

black decorative ring

1NL 008 090-831

Type approval 877, ECE R19 B series 02

22

Position lights

Position light

for horizontal surface-mounting

Black housing

with 0.5 m cable, 10–33 V 2PF 959 570-401*

with 5 m cable, 10–33 V 2PF 959 570-411*


Position light

for horizontal surface-mounting

White housing

with 0.5 m cable, 10–33 V 2PF 959 570-427*

with matching 25° adapter base, white

(order separately)

8HG 959 571-007

12 V/0.5 W, current consumption = approx. 0.04 A


Position light

for horizontal or vertical flush mounting

with 0.5 m cable, 10–33 V 2PF 959 590-401*

with 5 m cable, 10–33 V 2PF 959 590-411*



Position light

for surface-mounting, 12 V, modern night-time design and high level of safety

thanks to maximum illuminated area

6.3 mm contact pin

horizontal 2PG 343 690-107

vertical 2PG 343 690-117

500 mm cable

horizontal 2PG 343 690-301

vertical 2PG 343 690-317

Type approval 5853

with cable with 6.3 mm

contact

* Please see the note on pages 8 and 9 regarding LED indicators and LED indicator failure check.

23

Fro

nt

lig

hti

ng

Position lights

Position light with reflector

for horizontal surface-mounting, with 2 LEDs

12 V/0.3 W, current consumption = approx. 0.03 A 2PG 964 295-121*

Type approval 0301


for horizontal or vertical flush-mounting,

with pre-fitted 12 V/5 W bulb and seal

12 V 2PG 964 295-011

Position light without reflector (not shown)

for horizontal or vertical flush-mounting

12 V 2PF 964 295-021


Position light

for horizontal surface-mounting,

with 20° adapter base included loose

12 V/0.3 W, current consumption = approx. 0.03 A 2PF 964 295-257*

Type approval 817


for horizontal or vertical flush-mounting,

with pre-fitted 12 V/3 W bulb

12 V 2PF 962 964-041

Seal (order separately) 9GD 963 281-001

Grommet (order separately) 9GT 963 129-001


24

a) Chrome-plated circular finisher

for surface-mounting 8XU 008 405-031

b) Position light using LED technology

for surface-mounting


Type approval 1696

a) b)

Indicator

with fitted amber bulb 12 V/21 W 2BA 008 221-107

Position light

(not shown, design like the indicator) 2PF 008 221-011

Harness with grommet 8KA 152 134-007

Type approval 878 / 879

Indicator and position lights

Position light

for surface-mounting, clear lens, 2 x M5 fastening screws

12 V 2PF 001 259-631

Intermediate piece

for surface-mounting at 45° (order separately) 8HG 002 247-001

Type approval 21624

Position light without reflector

for flush-mounting, clear lens, black plastic housing with adhesive film for

sticking to the body. 2-pole cable, 150 mm long, open cable ends, with 2 white

LEDs


Type approval 11371


� SAE type approval for vehicles < 2,032 mm width

� SAE type approval for vehicles > 2,031 width

25

Fro

nt

lig

hti

ng

Oval light series Type approval

for horizontal or vertical surface-mounting, with grommet.

Note: Depending on the installation position, the water drain

opening must be broken out.

ECE SAE

(USA)

Indicator, without bulb

12 / 24 V 2BA 343 130-057 X � �

Indicator/position light, without bulb

12 / 24 V 2BE 343 130-007 X


Indicator and position lights




60 mm Premium lights Type approval

with clear lens ECE SAE

(USA)

Indicator with amber bulb

12 V 2BA 009 001-071 X

12 V 2BA 009 001-091 �

with silver-coloured bulb

12 V 2BA 009 001-201 X

Position light

12 V 2PF 009 001-081 X �


60 mm Premium LED light Type approval

Position light, for flush-mounting, with 12 LEDs ECE SAE

(USA)

12 V 2PF 009 001-421* X �

Type approval 12390

90 mm Type approval

ECE SAE

(USA)

Indicator with amber bulb

12 V 2BA 965 039-061 X � �

Position light

12 V 2PF 965 039-071 X � �

Type approval 10215

26

These headlight cleaning systems have ECE type approval for the following

series of Hella headlights when installed according to the installation instructions

provided.

Ø 50 mm Ø 90 mm Ø 100 mm

1BL 009 071-… 1KO 008 191-... 1BL 007 834-...

1ML 009 071-… 1KO 008 192-... 1KL 007 834-...

1F0 008 390-… 1BL 008 193-...

1BL 008 194-...

1AL 009 997-...

1LL 009 997-...

Headlight cleaning systems

Legislation prescribes the use of a lens cleaning system when

Xenon low beam headlights are used. (The system can also be

used for halogen headlights and spotlights.)

Hella cleaning systems work using the jet-water principle which

manages without wipers and brushes in that the kinetic energy

from large water drops blasts dirt particles from the lens and

rinses them away.

with fixed nozzles

12 V 8WS 008 549-001

as 8WS 008 549-001,

but with longer pipes

12 V 8WS 008 549-011

Ultrasonic headlight range adjustment (LWR)

The ultrasonic system is a universal headlight range adjustment

system for use as original equipment or for retrofi tting to

vehicles with Xenon headlights. The system sensor measures

the distance from the underside of the vehicle to the road

surface and forwards the signal to the central control unit,

which then achieves optimum setting of the Xenon headlights

via the setting motors.

See the installation instructions for more detailed information.

12 V, one sensor (passenger car) 8XX 010 315-001

12 V, two sensors (3.5 t) 8XX 010 315-101

with telescopic individual nozzles

12 V 8WT 008 549-101

with telescopic double nozzles

12 V 8WT 008 549-201

Ultrasonic system for headlight range adjustment – overview

Control unit

Rear sensor

Optional:

front sensor

LWR actuator

Adjustment cable

Parking light

Ground

27

Fro

nt

lig

hti

ng

Rear lighting

Combination rearlights Page 29 – 39

Clearance lights Page 40 – 41

Safety stoplights Page 42 – 43

Reflector Page 43 – 44

Number plate lights Page 44 – 45

28

Combination rearlight Caraluna II Plus Type approval

for horizontal flush-mounting, with 12 V bulbs, with combined

indicator and reverse light module, can also be used as an

upgrade of the basic version 2.. 343 419-...

ECE SAE

(USA)

with triangular reflector

left 2VP 343 590-017 �� X

right 2VP 343 590-027 �� X

with round reflector

left 2VP 343 590-037 �� X

right 2VP 343 590-047 �� X

Type approval 9836



� Taillight � Stoplight � Indicator � Rear fog light � Reverse light

Reflector Side-marker light with reflector � Licence plate light

Combination rearlight Caraluna II Plus Chromium Type approval

for horizontal flush-mounting, with 12 V bulbs, in brilliant

finish, with combined indicator and reverse light module, can

also be used as an upgrade of the basic version 2.. 343 419-

..., without side marker reflector light

ECE SAE

(USA)


left 2VP 343 590-057 �� X

right 2VP 343 590-067 �� X


left 2VP 343 590-077 �� X

right 2VP 343 590-087 �� X

Type approval 10217

Combination rearlight Caraluna II Chromium Type approval

for horizontal flush-mounting, with 12 V brilliant-finish bulbs,

without side marker reflector light

ECE SAE

(USA)


left 2VA 341 419-097 �� X

right 2VP 341 419-107 �� X

left 2VP 341 419-157 �� X

right 2VA 341 419-167 �� X


left 2VA 341 419-077 �� X

right 2VP 341 419-087 �� X

left 2VP 341 419-177 �� X X � �

right 2VA 341 419-187 �� X X � �

Type approval 10217

Combination rearlights

29

Re

ar

lig

hti

ng

Caraluna Vertical Type approval

for vertical flush-mounting, with 12 V bulbs ECE SAE

(USA)

Right-hand traffic

left 2SD 343 440-017 �� X

right 2SD 343 440-027 �� X

Left-hand traffic

left 2SD 343 440-037 �� X

right 2SD 343 440-047 �� X

Type approval 0501

Combination rearlight Caraluna II Type approval

for horizontal flush-mounting, with 12 V bulbs ECE SAE

(USA)


left 2VA 341 419-017 �� X

right 2VA 341 419-027 �� X

left 2VP 341 419-037 �� X

right 2VP 341 419-047 �� X

right 2VA 341 419-067 �� X


left 2VA 341 419-117 �� X

right 2VA 341 419-147 �� X

right 2VP 341 419-127 �� X X � �

left 2VP 341 419-137 �� X X � �

Type approval 9836

Caraluna Modular combination rearlight Type approval

for vertical flush-mounting, with 12 V bulbs ECE SAE

(USA)

with combined indicator and reverse light module, with

integrated red side marker light

Red lens

left 2VP 343 520-017 �� X

right 2VP 343 520-027 �� X

Clear lens

left 2VP 343 520-057 �� X

right 2VP 343 520-067 �� X

Type approval 12677


30

LED combination rearlight Type approval

12 V, for horizontal flush-mounting,

brilliant finish

ECE SAE

(USA)

red lens 2SB 008 982-307 �� X

clear lens 2SB 008 982-367 �� X

12 V/3 W, current consumption = approx. 0.25 A

clear lens 2BA 008 982-347* � X

12 V / 2 W, current consumption = approx. 0.17 A

* with impulse for indicator failure check

Type approval 10880

Accessories

for LED and bulb versions

Seal 8GD 159 740-007

Combination rearlight Type approval

12 V, for horizontal flush-mounting,

brilliant finish

ECE SAE

(USA)

2SA 008 805-007 � X X � �

for double attachment 2DA 008 805-017 � X X � �

for double attachment 2SB 008 805-027 �� X X � �

for double attachment,

with clear lens

2BA 008 805-057�

X

2NE 008 805-037 � X

2ZR 008 805-047 � X X � �

Type approval 10151

Combined taillight/stop light/indicator

for horizontal or vertical surface mounting, with 24 LEDs, clear lens, with ECE

and EMC type approval

Multi-voltage 9–32 V, with 200 mm cable and 4-pole

AMP plug 282 106-1, mating plug to be used AMP

282 088-1

2SD 343 910-017*

with integrated AMP plug 282 106-1 in the housing 2SD 343 910-027*

Taillight: 12 V / 0.5 W, current consumption = approx. 0.04 A

Stoplight: 12 V / 1 W, current consumption = approx. 0.08 A

Indicator: 12 V / 1.5 W, current consumption = approx. 0.125 A






Reflector Side-marker light with reflector � Licence plate light


31

Re

ar

lig

hti

ng

LED tail-stoplight Type approval

for surface-mounting ECE SAE

(USA)

with clear lens

Multi-voltage 9–32 V 2SB 344 200-027* �� X

with red lens

Multi-voltage 9–32 V 2SB 344 200-081* �� X

Taillight: 12 V/1 W, current consumption = approx. 0.08 A

Stoplight: 12 V/3 W, current consumption = approx. 0.25 A

Type approval 12658 and 03 4895

LED indicator Type approval

for rear surface-mounting, with patented electronics for

indicator failure check

ECE SAE

(USA)

with clear lens

Multi-voltage 9–32 V 2BA 344 200-037* � X

Indicator: 12 V / 3 W, current consumption = approx. 0.25 A


LED rear fog light Type approval


(USA)

with clear lens

Multi-voltage 9–32 V 2NE 344 200-061* � X

with red lens

Multi-voltage 9–32 V 2NE 344 200-091* � X

Rear fog light: 12 V/2 W, current consumption = approx. 0.17 A


= GGVS/ADR tested

LED tail-stop-indicator light Type approval

for surface-mounting, redesign of the 964 169 series, with

ECE, EMC and GGVS type approval, 24 LEDs, with patented

electronics for indicator failure check

ECE SAE

(USA)

with clear lens

Multi-voltage 9–32 V 2SD 344 200-001* �� X

with red/transparent lens

Multi-voltage 9–32 V 2SD 344 200-071* �� X

Indicator: 12 V / 2 W, current consumption = approx. 0.17 A

Taillight: 12 V/1 W, current consumption = approx. 0.08 A


Type approval 12371 and 12658 and 03 4895


32

LED reverse light Type approval


(USA)

with clear lens

Multi-voltage 9–32 V 2ZR 344 200-051* � X

Reverse light: 12 V/2 W, current consumption = approx. 0.17 A






Reflector Side-marker light with reflector � Number plate light


12 V, for surface or flush-mounting, brilliant finish ECE SAE

(USA)

2BA 964 169-507 653 � X X � �

2SB 964 169-537 816 �� X X � �

2ZR 964 169-517 2312 � X X � �

2NE 964 169-527 3809 � X


12 V, for surface or flush-mounting Depending on the

installation position, the water drain opening must be broken

out.

ECE SAE

(USA)

2DA 964 169-001 808 � X X � �

2BA 964 169-011 648 � X X � �

2NE 964 169-021 3808 � X X � �

2ZR 964 169-031 2311 � X X � �

2BA 964 169-041 9804 �� X

2BN 964 169-051 9801 �� X X �

2TA 964 169-061 9805 �� X X �

2BE 964 169-071* 9802 X

2SW 964 169-081 9803 �� X X �

2SA 964 169-091 810 � X X � �

2SD 964 169-111 9903 �� X

2TA 964 169-137 ��

2TA 964 169-147 ��

2SB 964 169-287 815 �� X X � �

* Indicator/position light


33

Re

ar

lig

hti

ng


12 V and 24 V, for flush-mounting

a) Taillight, red lens 2XA 008 221-021 �

with fitted bulb 12 V/5 W 2SA 008 221-127 �

Stoplight, red lens 2XA 008 221-021 �

with fitted bulb 12 V/21 W 2DA 008 221-167 �


b) Indicator 12 / 24 V, grey lens 2BA 008 221-041 �

with fitted amber bulb 12 V/21 W 2BA 008 221-147 �

Type approval 1051, 878 and 879

c) Rear fog light 12 / 24 V, red lens 2NE 008 221-031 �

with fitted bulb 12 V/21 W 2NE 008 221-137 �

Type approval 1050

d) Reverse light 12 / 24 V, grey lens 2ZR 008 221-051 �

with fitted bulb 12 V/21 W 2ZR 008 221-157 �

Type approval 1052

Accessories for light series 008 221-...

Harness with grommet 8KA 152 134-007

Grommet separate 9GT 137 236-007

a, c

b, d

1) Chrome-plated circular finisher

12 V 8XU 008 405-031

2) LED circular tail-clearance light

for flush-mounting, with 12 red LEDs, clear lens, 1.8 W

12 V 2SA 008 405-021*

LED circular tail-stoplight

for flush-mounting, with 12 red LEDs, clear lens, 2.1 W

12 V 2SB 008 405-101*

3) Circular reflector

for flush-mounting 8RA 008 405-001


Examples for combination possibilities

1) Rear lighting 2BA 008 221-041 �

and 2SA 008 405-021 �

2) Rear lighting 2XA 008 221-021 �

and 8RA 008 405-001

Accessories

Heat baffle plate

(necessary at > 50 °C ambient temperature)

9XB 161 749-007

1)

2)

3)

1)

2)


** With impulse for indicator failure check


34




Reflector Side-marker light with reflector � number plate light

60 mm Premium lights Type approval

with pre-fitted bulbs 12 V, inc. design ring ECE SAE

(USA)

Red lens 2SA 009 001-047 � X

Red lens 2DA 009 001-057 � X

Red lens 2SB 009 001-067 �� X

Grey lens 2BA 009 001-007 � X

with Silvervision bulb 2BA 009 001-191 � X

Red lens 2NE 009 001-027 � X X

Grey lens 2ZR 009 001-017 � X X

Type approval 3917, 6546, 7613 and 23255

Macro reflector

12 V, red 8RA 009 001-037 X X

Type approval 3189

12 Power TOPLED LEDs Type approval

for surface-mounting at the front,

12 V / 3 W current consumption approx. 0.25 A

ECE SAE

(USA)

12 V, clear lens 2SB 009 001-401 �� X

12 V, clear lens 2BA 009 001-411 � X

24 V, clear lens 2BA 009 001-431** � X

Type approval 12390

Design ring Ø 71.6 mm

suitable for 60 mm light modules with Ø 71.6 mm

(part number ... 009 001-... except for LED versions), perfect high-sheen finish

with one “click”

high-sheen chrome-plated 9HB 161 122-012

silver 9HB 161 122-007

Premium silver 9HB 164 168-002

Combination example

for a combination rearlight ... 009 001-...

with design ring Ø 71.6 mm high-sheen chrome-plated 9HB 161 122-012

inc. design ring

inc. design ring


35

Re

ar

lig

hti

ng

Accessories 60 mm combination rearlights

Adapter ring for frontal screw attachment for combination rearlights

Ø 60 mm

Direct attachment and attachment in the circular module

black 9XD 161 119-007

Adapter ring

for the attachment of LED lights or the reflector in the circular module

black (not shown) 9XD 161 119-017

Circular modules Type approval

available with a choice of clear or red cover lens ECE SAE

(USA)

Circular module, 12 V

Red lens 2SB 009 362-041* �� X

Clear lens 2SB 009 362-021* �� X

Red lens 8RA 009 362-001 X


Circular module without lighting function

for surface-mounting, light units with identical design

Red lens 8XU 009 362-101

Clear lens 8XU 009 362-111

Design ring Ø 118 mm

suitable for circular module 009 362

perfect high-sheen finish with one “click”

high-sheen chrome-plated 9HB 163 085-012

silver 9HB 163 085-001

Combined tail-stop-indicator light SAE Type approval

12 V / 4.8 W current consumption ca. 0.4 A , for rear flush-

mounting, clear lens, with 24 red LEDs, suitable for the light

series 009 362-..., 009 001-...

ECE SAE

(USA)

2SD 009 362-201* X � �


36

Combination rearlight Ø 90 mm Type approval

for flush-mounting, brilliant finish, screw heads not visible,

with fitted bulbs, reversing light and rear indicators with

smoked glass lens, also available as daytime running light

ECE SAE

(USA)

Attachment possible from the front using the

enclosed clips or from the rear using screws

12 V 2SA 965 039-001 � X X � �

12 V 2DA 965 039-011 � X X �

12 V 2BA 965 039-021/7 � X X �

12 V 2NE 965 039-031/7 � X X � �

12 V 2ZR 965 039-041/7 � X X � �

12 V 2SB 965 039-051/7 �� X X �

with mounted attachment clips

12 V 2SA 965 039-307 � X X � �

12 V 2DA 965 039-317 � X X �

12 V 2BA 965 039-347 � X X �

12 V 2NE 965 039-327 � X X � �

12 V 2ZR 965 039-337 � X X � �

12 V 2SB 965 039-357 �� X X �

Type approval 10217






EuroLED Type approval

1 Power-LED, for surface-mounting, cast in one piece with

the base plate, electrical connection through cable 2500 mm

long, multi-voltage 9–33 V

ECE SAE

(USA)


2SB 959 821-601* �� X

2ZR 959 820-601* � X

2BA 959 822-601* � X

* with impulse for indicator failure check, SAE versions on request


2NE 959 821-201* � X



37

Re

ar

lig

hti

ng

LED tail-stop-indicator light

only for vertical flush-mounting, with 24 LEDs, 12 red LEDs for stoplight ,

with 4-pole Deutsch plug integrated in the housing, with patented electronics for

indicator failure check, with ECE and EMC type approval

9 V / 0.9 W, current consumption = approx. 0.1 A 2SD 343 390-401*

32 V / 1.2 W, current consumption = approx. 0.04 A 2SD 343 390-407*

Type approval 11785, 12381 and 034631

"Oval" combination rearlight

for horizontal and vertical surface-mounting, clear lens, 24 LEDs, can be used

on the right and left, can be turned through 180°, 2 bodywork fastening screws

(diagonal arrangement) with 100 mm harness, multi-voltage 9–32 V

Type approval

ECE SAE

(USA)

2SD 343 390-017* �� X

12 red LEDs for stoplight:


12 red LEDs for taillight (reduced power):


12 amber LEDs for indicator (SAE version 12 red LEDs) with

patented electronics for indicator failure check:


2BA 343 390-071* � X


24 amber LEDs; (SAE version 24 red LEDs) with patented

electronics for indicator failure check

2SB 343 390-091* �� X


Taillight: 12 V/0.2 W, current consumption = approx. 0.02 A

(reduced power)


38

“Oval Light” combination rearlight Type approval

for horizontal and vertical flush-mounting, lens with stripe

pattern, housing with black edging all the way round,

completely pre-fitted, with 100 mm cable and pre-fitted

12 V bulb

ECE SAE

(USA)

left 2SA 343 400-217 823 � X

right 2SA 343 400-227 823 � X

left 2DA 343 400-237 821 � X

right 2DA 343 400-247 821 � X

left 2ZR 343 400-297 2314 � X

right 2ZR 343 400-307 2314 � X

left 2NE 343 400-277 3812 � X

right 2NE 343 400-287 3812 � X

left 2BA 343 400-257 655 � X

right 2BA 343 400-267 655 � X

left 2SB 343 400-317 822 �� X

right 2SB 343 400-327 822 �� X

“Oval” combination rearlight - brilliant-finish

appearance

Type approval

suitable for horizontal and vertical flush and surface-

mounting, right or left (= turn light through 180°), can be used

for 12 V and 24 V operation, before mounting, break out the

water drain hole and insert seal, black housing, clear cover

lens

ECE SAE

(USA)

2SB 343 130-021/7 7698 �� X � �

2BA 343 130-051/7 6550 � X � �

2NE 343 130-031/7 3919 � X

2ZR 343 130-041/7 23257 � X � �







39

Re

ar

lig

hti

ng

Clearance light

for vertical surface-mounting, red/white

with grey base plate, with 12 V bulb

left 2XS 008 479-001

right 2XS 008 479-011

red, PO function silver-coloured

left 2XS 008 479-107

right 2XS 008 479-117

left, without bulb 2XS 008 479-061

right, without bulb 2XS 008 479-071

with white base plate

left 2XS 008 479-081

right 2XS 008 479-091

Type approval 1201

Clearance light

with pre-fitted 12 V bulb and seal,

for horizontal or vertical flush-mounting

oval 2XS 964 295-031

Type approval 812

LED clearance light

for horizontal surface-mounting, 2 LEDs, 12 V

with seal and cable 5,000 mm long

oval 2TM 964 295-101*


Type approval 0302

LED clearance light

for surface-mounting, modern night-time design and high level of safety

thanks to maximum illuminated area, 12 V

6.3 mm contact pin, horizontal 2TM 343 690-157*

6.3 mm contact pin, vertical 2PG 343 690-167*

500 mm cable, horizontal 2PG 343 690-351*

500 mm cable, vertical 2PG 343 690-361*


with 6.3 mm

contact

with cable

Clearance lights

40

LED clearance light

for horizontal or vertical surface-mounting, with 2 LEDs and light guide strip in

red, 2 screw holes ø 5.4 mm for fastening screws

12 V 2XS 008 078-011*


Type approval 0515

LED clearance light

for horizontal surface-mounting, 2 LEDs, 8–28 V

500 mm cable 2XA 959 560-401*

5,000 mm cable 2XA 959 560-411*



LED clearance light

for horizontal or vertical surface-mounting, with reflector, 12 V,

2 holes for fastening screws B 4.2

500 mm cable 2TM 008 645-081*

5,000 mm cable 2TM 008 645-091*


* With horizontal surface-mounting, the LED field must point to the outer vehicle

edge. With vertical surface-mounting, the LED field may point upwards

or downwards. (Clearance light can also be used as a taillight with reflector.)


LED clearance light

for horizontal surface-mounting, 2 LEDs, 8–28 V

500 mm cable 2XA 959 790-401*

5,000 mm cable 2XA 959 790-411*



Clearance lights


41

Re

ar

lig

hti

ng

LED safety stoplight

for horizontal flush-mounting, with 12 red LEDs and connected

cable and 2-pole AMP plug

12 V, red lens 2DA 959 071-537*

12 V, clear lens 2DA 959 071-037*


Type approval 7547


for horizontal or vertical surface-mounting, with 10 red LEDs,

with 3000 mm cable, design height 9 mm

red lens

with screw attachment 2DA 343 106-007*

self-adhesive (for smooth and clean surfaces) 2DA 343 106-207*


Type approval 7696


for horizontal surface-mounting, with 12 red LEDs, in brilliant finish, with 3D

effect thanks to each LED being embedded in a separate reflector,

with 200 mm cable

red lens

12 V 2DA 343 800-007*

12 V, with rubber base 2DA 343 800-057*


Type approval 7715

Safety stoplight in combination with rear view camera, page 63

Safety stoplights


for horizontal or vertical surface-mounting, with 10 red LEDs,

with 3000 mm cable, design height 9 mm

with smoked glass lens

with screw attachment 2DA 343 106-021*

self-adhesive (for smooth and clean surfaces) 2DA 343 106-221*


Type approval 7696

42

Safety stoplight

for horizontal flush-mounting, with pre-fitted 12 V bulbs, 2.3 W

red lens

with PE foam seal, coated on both sides

with adhesive

2DA 008 136-027

Screw attachment from the front through the lens (screws

are not included in the scope)

2DA 008 136-017

Type approval 02799

Safety stoplight

for horizontal surface-mounting, with 12 V bulbs, 2.3 W

cable 146 751-00 included loose

2DA 008 136-031

Accessories (order separately):

Cable with grommet 8KA 146 751-007

Cable without grommet 8KA 144 707-007

Grommet only 9GT 146 757-007

Type approval 02799

Reflector

self-adhesive

red 8RA 002 014-081

yellow 8RA 002 014-101

white 8RA 002 014-091

Type approval 023535

Reflector

self-adhesive

red 8RA 003 326-031

yellow 8RA 003 326-041

white 8RA 003 326-051


Reflector

for horizontal or vertical surface-mounting,

self-adhesive

red 8RA 343 160-007

yellow 8RA 343 160-027

white 8RA 343 160-017

Type approval 3190


Safety stoplights and refl ectors

43

Re

ar

lig

hti

ng

Number plate light

for flush-mounting above or below the number plates 520 x 120 mm

(2 or 3 lights) and 340 x 240 mm (2 lights), 2 x M4 fastening screws, installation

depth: approx. 25 mm, clear lens

with chrome brilliant-finish edge 2KA 001 378-001

with silver-coloured edge, without fastening screws 2KA 001 378-041

with black edge and 12 V bulb 2KA 001 378-127

Type approval 12958

Number plate light

for flush-mounting above or below (2 lights) the number plate 520 x 120 mm,

2 holes for fastening screws, installation depth approx. 20 mm, clear lens

with 12 V bulb 2KA 004 331-061

Type approval 22890

Reflector

with 2 holes for fastening screws

red 8RA 343 220-017

self-adhesive, red 8RA 343 220-007


Reflector

2 holes, Ø 6 mm, for fastening screws.

red 8RA 002 020-001

Type approval 02346

Rear fog light

with integrated reflector

12 V, inc. bulb 2NE 344 610-007

12 V, without bulb 8RA 344 610-017

Type approval 5857

Refl ectors and Number plate lights

44

LED licence plate light

for surface-mounting left and right next to the licence plate 520 x 120 mm, with

2.5 m cable, bracket for mounting the light to the body, cover, fastening screws,

cover caps for screws as well as a spacer for different mounting situations,

multi-voltage 10–33 V; with 2 LEDs 0.5 W

clear lens, black housing 2KA 959 640-607*




12 V, for surface-mounting on the right or left next to the licence plate, with

4 LEDs, clear lens, housing made of black plastic, with CE and ECE type

approval, with flat plug 6.3 x 0.8


for 520 x 120 mm licence plates, only 1 light required for

illumination

2KA 010 278-321*

Type approval 2609

for 340 x 240 und 280 x 200 mm licence plates 2KA 010 278-421*

Type approval 2911


for flush-mounting above the licence plate 520 x 120 mm, 2 lights required

for illumination, with black plastic frame, with flat plug 6.3 x 0.8

12 V/1 W, current consumption = approx. 0.08 A 2KA 010 278-311*

Type approval 2609


12 V, for flush-mounting above the licence plate, with frame, with flat plug

6.3 x 0.8

for 340 x 240 and 280 x 200 mm licence plates, only 1

light required for illumination

2KA 010 278-421*

Type approval 2911

= GGVS/ADR tested


Licence plate lights

45

Re

ar

lig

hti

ng

Side lighting

Side marker lights Page 47 – 48

Auxiliary indicators Page 49

46

Side marker light

for horizontal flush-mounting, with reflector, with seal, with 12 V bulb, with ECE

and SAE type approval

12 V/5 W, amber 2PS 964 295-001

Red SMLR in accordance with SAE Page 40

Type approval 9807


Side marker light

for horizontal or vertical flush-mounting, with reflector,

with 12 V bulb, with white base plate, with ECE and SAE type approval

12 V/3 W 2PS 962 964-037

Seal (order separately) 9GD 963 281-001

Grommet (order separately) 9GT 963 129-001


LED side marker light

for horizontal surface-mounting, with 2 LEDs, with reflector,

with cable 195 mm long, with double-sided adhesive tape on the base plate and

“adapting cams”

12 V/1.0 W, current consumption = approx. 0.08 A 2PS 009 226-027*

Type approval 10236

with cable with 6.3 mm contact


for surface-mounting, modern night-time design and high level of safety

thanks to maximum illuminated area, 12 V

6.3 mm contact pin, orange frame 2PS 343 690-011*

6.3 mm contact pin, white frame 2PS 343 690-001*

6.3 mm contact pin, black frame 2PS 343 690-061*

500 mm cable, white frame 2PS 343 690-201*

Rubber seal 9GD 343 697-007

Grommet 9GT 343 697-002

Type approval 5853

Further versions on request.

Side marker lights

47

Sid

e lig

hti

ng

Side marker light set Type approval

for horizontal flush-mounting, for retrofitting to passenger

cars < 6 m, 4 units each, with LED technology

ECE SAE

(USA)

Amber lenses,

silver-grey finishers

2PS 008 138-801* X X

Grey lenses,

black finishers

2PS 008 138-821* X X

Grey lenses,

silver-grey finishers

2PS 008 138-811* X X


Type approval 9110

Side marker light set Type approval

for horizontal and vertical flush-mounting, 4 units each,

with amber 12 V / 5 W bulb

ECE SAE

(USA)

in arrow design 2PS 008 541-801* X

Type approval 1223

For vehicles < 6 m in length and/or < 3.5 t, auxiliary indicators

of category 5 are prescribed, and for vehicles > 6 m in length

and/or > 3.5 t, auxiliary indicators of category 6 are prescribed.

Information

Side marker lights


for horizontal flush-mounting, with 2 LEDs, with reflector, with seal and two

cables 500 mm long, with ECE and SAE type approval

with fastening screws 2PS 964 295-067*

self-adhesive, without seal,

with caps for the screw holes

2PS 964 295-081*


Type approval 0202

48

Auxiliary indicators

LED auxiliary indicator Type approval

for horizontal flush-mounting, category 5, simple gluing into

prepared mirror, can also be used as a universal auxiliary

indicator

ECE SAE

(USA)

2BM 008 771-007* X X



Auxiliary indicator

Category 5 for 12 V, for flush-mounting on the side

small, space-saving 2BM 003 563-111

Type approval 42621

For vehicles < 6 m in length and/or < 3.5 t, auxiliary indicators

of category 5 are prescribed, and for vehicles > 6 m in length

and/or > 3.5 t, auxiliary indicators of category 6 are prescribed.

Information

Auxiliary indicator

Category 5 and 6 for 12 V and 24 V / 21 W, for surface-mounting at the side

left 2BM 006 692-017

right 2BM 006 692-027


Auxiliary indicator

Category 6 for 12 V and 24 V / 21 W, extremely flat design, for surface-mounting

at the side

Harness for non splashwater-proof area 8KA 157 425-007

Amber lens 2BM 008 355-001

Type approval 1059

Clear lens 2BM 008 355-017

Type approval 1848




49

Sid

e lig

hti

ng

Interior lighting

Ceiling lights Page 51 – 56

Orientation lights Page 57 – 59

Reading lights Page 60

Ambient lights Page 61

50

Round LED spotlight, fi xed

Voltage: multi-voltage 10 – 31 V, clear lens, 1 white Power LED Installation:

choice of screw-type or spring-clamp fastening,

Current consumption spot at 12 V / 2.5 W = approx. 0.20 A

Flush-mounting, fixed, wide illumination (40°)

Finisher colour*:

white 2JA 344 040-701

black 2JA 344 040-711

silver 2JA 344 040-721

Flush-mounting, fixed, spot-type illumination (20°)

Finisher colour*:

white 2JA 344 040-741

black 2JA 344 040-751

silver 2JA 344 040-761

Round finisher with angled edges

black 9AB 344 057-001

white 9AB 344 057-011

silver 9AB 344 057-021

chrome 9AB 344 057-061

gold 9AB 344 057-071

Round finisher with rounded edges

chrome 9AB 344 045-061

gold 9AB 344 045-071

Metal frame, stainless polished 9AB 959 505-501

Metal frame, stainless,satin finished 9AB 959 505-561

Square finisher with anqled edges

black 9AB 344 058-001

white 9AB 344 058-011

silver 9AB 344 058-021

chrome 9AB 344 058-061

gold 9AB 344 058-071

* further finisher colours (e.g. real-wood look) or ambient Celis® light guide ring

(e. g. blue, red) on request

Round LED spotlight, adjustable

Voltage: multi-voltage 10 – 31 V, clear lens, 1 white Power LED Installation:

choice of screw-type or spring-clamp fastening, Current consumption spot at

12 V / 2.5 W = approx. 0.20 A

Flush-mounting, adjustable, wide illumination (40°)

Finisher colour*

white 2JA 343 790-301

black 2JA 343 790-311

silver 2JA 343 790-341

Flush-mounting, adjustable, spot-type illumination (20°)

Finisher colour*

white 2JA 343 790-401

black 2JA 343 790-411

silver 2JA 343 790-441

additional with white, ambient Celis® light guide ring, current consumption Celis®

light guide ring at 12 V / 0.5 W = approx. 0.04 A

Flush-mounting, adjustable, wide illumination (40°)

Finisher colour*

white 2JA 343 790-701

black 2JA 343 790-711

silver 2JA 343 790-741

Flush-mounting, adjustable, spot-type illumination (20°)

Finisher colour*

white 2JA 343 790-601

black 2JA 343 790-611

silver 2JA 343 790-641

* further trim colours (e.g. real-wood look) or ambient Celis® light guide ring

(e.g. blue, red) on request

Accessories

Finisher chrome 9AB 343 792-061

Finisher gold 9AB 343 792-071

Ceiling lights

51

Inte

rio

r lig

hts

LED spots round, fl at fl ush-mounting/surface-mounting

5 V, flush-mounting version only 14 mm /surface-mounting version only 22 mm

Individual packaging

comprising 1 LED spot, 1 coloured light frame, 1 coloured installation frame,

1 sealing ring for installation

For flush mounting,

fixed

Finisher colour*:

Standard LED

spot 1.5 W

High-Power LED spot 2.6 W

(double light power with

cooling element)

without Celis®

white 2JA 344 199-001 2JA 344 599-001

black 2JA 344 199-011 2JA 344 599-011

silver 2JA 344 199-021 2JA 344 599-021

with Celis® warm-white ambient

white 2JA 344 199-101 2JA 344 599-101

black 2JA 344 199-111 2JA 344 599-111

silver 2JA 344 199-121 2JA 344 599-121

with Celis® blue ambient

white 2JA 344 199-201 2JA 344 599-201

black 2JA 344 199-211 2JA 344 599-211

silver 2JA 344 199-221 2JA 344 599-221

with Celis® red ambient

white 2JA 344 199-301 2JA 344 599-301

black 2JA 344 199-311 2JA 344 599-311

silver 2JA 344 199-321 2JA 344 599-321

with Celis® orange ambient

white 2JA 344 199-351 2JA 344 599-351

black 2JA 344 199-361 2JA 344 599-361

silver 2JA 344 199-371 2JA 344 599-371

Accessories

Installation frame, the overall height with frame is 22 mm

chrome 9AB 344 192-061

gold 9AB 344 192-071

A control unit is required for the use of more

than one spot

for 4 Standard or High-Power spots

please use ...

5XA 344 150-001

for 8 Standard or 5 High-Power spots

please use ...

5XA 344 150-011

* further trim colours (e.g. real-wood look) available on request

Ceiling lights

Standard LED spot High-Power LED spot

52

LED spots round, fl at fl ush-mounting/surface-mounting

5 V, flush-mounting version only 14 mm /surface-mounting version only 22 mm

Set packaging

comprising 4 LED spots, 4 coloured light frames, 4 coloured installation frames,

4 sealing rings for installation, 1 central control unit

(5XA 344 150-001)

Surface-mounted,

fixed

Finisher colour*:

Standard

LED spot 1.5 W

High-Power LED spot 2.6 W

(double light power with

cooling element)

without Celis®

white 2JA 344 190-001 2JA 344 590-001

black 2JA 344 190-011 2JA 344 590-011

silver 2JA 344 190-021 2JA 344 590-021

with Celis® warm-white ambient

white 2JA 344 190-101 2JA 344 590-101

black 2JA 344 190-111 2JA 344 590-111

silver 2JA 344 190-121 2JA 344 590-121

with Celis® blue ambient

white 2JA 344 190-201

black 2JA 344 190-211

silver 2JA 344 190-221

with Celis® red ambient

white 2JA 344 190-301

black 2JA 344 190-311

silver 2JA 344 190-321

with Celis® orange ambient

white 2JA 344 190-351

black 2JA 344 190-361

silver 2JA 344 190-371

Accessories

Installation frame, the overall height with frame is 22 mm

chrome 9AB 344 192-061

gold 9AB 344 192-071

A control unit is required for the use of more

than one spot

for 4 Standard or High-Power spots

please use ...

5XA 344 150-001

for 8 Standard or 5 High-Power spots

please use ...

5XA 344 150-011

* further trim colours (e.g. real-wood look) available on request

Ceiling lights

Standard LED spot High-Power LED spot

53

Inte

rio

r lig

hts

Ceiling lights

Bulb-type spot, round

Voltage 12 V, clear lens, with 12 V / 5 W halogen bulb

Installation: either screw-type or spring-clamp fastening

Flush-mounting, fixed (not shown), mounting: screw attachment

Finisher colour*:

white 2JA 343 985-001

black 2JA 343 985-011

silver 2JA 343 985-041

Accessories

Round finisher with rounded edges

chrome 9AB 344 045-061

gold 9AB 344 045-071



Flush-mounted, adjustable

Finisher colour*:

white 2JA 343 795-001

black 2JA 343 795-011

silver 2JA 343 795-021

* further trim colours (e .g. real-wood look) available on request

Accessories

Chrome finisher 9AB 343 792-061

Gold finisher 9AB 343 792-071

EuroLED

for surface-mounting, cast in one piece with the base plate, 1 white Power-LED,

white lens, electrical connection through a cable 2,500 mm long,

multi-voltage 9 – 33 V, IP 6K6K, IP 6K7K

12 V/4 W, current consumption = approx. 0.33 A 2JA 959 820-501

EuroLED Touch

for surface-mounting, cast in one piece with the base plate, 1 white and 8 red

LEDs, white lens, electrical connection through a cable 2,500 mm long, multi-

voltage 9 – 33 V, with sensitive switch, for on/off and dimming as well as

changing between white and red light, IP 6K6K, IP 6K7K


black cover trim 2JA 959 950-031

white cover trim 2JA 959 950-041

54

Ceiling lights

= ADR / GGVS tested

Mini OvalLED

for flush-mounting, 4 white LEDs, 1 ambient LED, brilliant-finish and clear lens,

black housing, ambient lighting can be switched on, illumination for the driver or

instrument area at the side, IP 6K9K (variant without switch), temperature range

–40 °C to +60 °C


Red ambient, without frame and switch

Premium G-LED 2JA 343 570-011

Standard E-LED 2JA 343 570-031

Red ambient, with frame and switch


Standard E-LED 2JA 343 570-071

Blue ambient, without frame and switch


Blue ambient, with frame and switch


CargoLED, flush-mounting

for flush-mounting, 4 white Power LEDs, clear lens and aluminium installation

frame, electrical connection through a cable 310 mm long, multi-voltage

9 – 31 V, broader illumination at close range, ADR / GGVS tested, temperature

range –40 °C to +60 °C, IP 6K9K


Cold white LEDs 2JB 343 227-001

Warm white LEDs 2JB 343 227-041

Accessories

Installation frame grey 9XD 344 118-101

DuraLed

for surface-mounting, cast in one piece with white base plate, 36 white LEDs,

clear lens and white housing, electrical connection through a cable 2,500 mm

long, multi-voltage 9 – 33 V, broad horizontal and narrow vertical illumination


55

Inte

rio

r lig

hts

Ceiling lights

Transistor ceiling light

for surface-mounting, clear lens, with switch, compact fluorescent light, full

interference suppression

255 mm long, 7 W 2JA 007 373-001

285 mm long, 9 W 2JA 007 373-031

355 mm long, 11 W 2JA 007 373-061

440 mm long, 8 W 2JA 007 372-001

670 mm long, 13 W 2JA 007 372-041

LED lights

for surface-mounting, 355 mm long, with switch, lens and frame made of

impact-proof material, multi-voltage 10 – 30 V

12 LEDs 2JA 007 373-151

24 LEDs 2JA 007 373-161

56

LED step light

for flush-mounting, 1 LED, clear lens, electrical connection through a potted

cable 100 mm long, white cover cap, seal, attachment either using 2 screws or

with snap-on attachment, broad illumination at close range


White LEDs 2JA 998 560-017

Blue LEDs 2JA 998 560-057

LED step light

for flush-mounting, cast in one piece, 10 white LEDs, clear lens, cable

2,500 mm long, with screws, screw caps, seal and cable connector


Orientation lights

LED step light

for surface-mounting, cast in one piece with grey base plate, 10 white LEDs,

clear lens, grey cover caps, electrical connection through a cable 500 mm long,

wide illumination at close range, IP 6K9K, temperature range – 40 °C to + 60 °C


12 V, white LEDs 2JA 343 606-007

12 V, blue LEDs 2JA 343 606-201

LED step light

for surface-mounting, cast in one piece with the base plate, clear lens, grey

housing, for horizontal or vertical surface-mounting, electrical connection

through flat plug and grommet, with prism rod as light aperture body


12 V, 2 white LEDs 2JA 008 078-031

57

Inte

rio

r lig

hts

Orientation lights

Mini ThinLED

for surface-mounting, cast in one piece with grey base plate, clear lens,

electrical connection through a cable 170 mm long, wide illumination at close

range, temperature range – 40 °C to + 60 °C, IP 6K9K


12 V, 5 white LEDs 2JA 343 660-101

LED entry and awning light

for surface-mounting, for 12 V, for optimum illumination of the steps and the

area in front, with 3 tubular bulbs à 5 W, housing painted silver-coloured

12 V 2XT 008 929-001

LED entry and awning light

for surface-mounting, 4 times the light intensity of the bulb-based version, multi-

voltage 9 – 31 W, clear lens, housing painted silver-coloured, 3 High-Power

LEDs, light colour 4000 K, energy consumption: 4.5 W at 12 V

2XT 008 929-011

LED step light

for flush-mounting, 2 LEDs, clear lens, seal, fastening screws and screw caps,

dust and waterproof, with inverse polarity protection, multi-voltage 10–33 V,

electrical connection through a cable 120 mm long


White LEDs 2XT 959 510-427

Blue LEDs 2XT 959 510-657

58

Orientation lights

LED step light

Cockpit or map-reading light, emergency and night-lighting

for flush-mounting, 4 LEDs, clear lens, with white ring for covering the 3

fastening screws, with cable 120 mm long, seal and fastening screws, dust and

waterproof, with inverse polarity protection, multi-voltage 10–33 V


White LEDs 2XT 959 500-677

Blue LEDs 2XT 959 500-207

Accessories



LED step light

for flush-mounting, with 4 white LEDs, with polished steel frame

12 V 2XT 980 500-227

LED step light

for flush-mounting with polished steel frame, multi-voltage 10–33 V

1 blue LED 2XT 959 680-611

1 white LED 2XT 959 680-811

LED step light

for flush-mounting, with 4 white LEDs, with square white frame

12 V 2XT 980 580-051

12 V, High-Power 2XT 980 580-551

59

Inte

rio

r lig

hts

Spot reading light

for surface-mounting, powerful glare-free light source with flexible metal arm,

with bracket for permanent installation, inc. Xenon bulb 12 V/6 W

for fixed installation

500 mm 2AB 004 532-001

195 mm 2AB 004 532-011

with plug for cigarette lighter

160 mm 2AB 004 532-021

Reading lights

LED reading light, flexibly adjustable arm

for surface-mounting, 1 white Power-LED, lens with pattern, electrical

connection through a cable 150 mm long, multi-voltage 9–31 V, narrow

illumination, ideal for map-reading, 12 V/2.5 W, current consumption = approx.

0.20 A

Finisher colour white*

150 mm 2JA 343 720-011

400 mm 2JA 343 720-111

Finisher colour black*

150 mm 2JA 343 720-021

400 mm 2JA 343 720-121

Finisher colour silver*

150 mm 2JA 343 720-291

400 mm 2JA 343 720-191

with plug for cigarette lighter

Finisher colour white 2JA 343 720-071

Finisher colour black 2JA 343 720-081

Finisher colour silver 2JA 343 720-091

* further finisher colours on request

Reading light

for surface-mounting, halogen bulb, white lens, black housing, integrated on/off

switch in light head, rotatable (340°), pivotable (330°), cable 250 mm long, with

replaceable red lens

12 V/5 W, current consumption = approx. 0.42 A 2AB 004 532-102

60

Ambient lights

LED reading lamp

12 V, with 1 LED, clear lens, installation through fastening element, there are

3 frames (white, grey and black) for installation included in the scope of supply

LED red 2JA 344 170-001

LED blue 2JA 344 170-011

LED white 2JA 344 170-021

LED amber 2JA 344 170-031

Variant LED white with silver instead of grey frame 2JA 344 170-201

61

Inte

rio

r lig

hts

Accessories

Rear view camera system RVS-1 Page 63

Intelligent Battery Sensor Page 64 – 65

Switches, plugs, sockets Page 66 – 67

Battery chargers Page 66

Hazard warning lights Page 67

Hand lamps Page 67

Boxes of spare bulbs Page 67

You will find more accessories, relays, normally open relays, changeover

relays, sensors, actuators and worklights in our main catalogues and on the

internet.

62

Rear view camera system RVS-1 ... see what is behind

Rear view camera system RVS-1

Scope of supply: High-quality rear view camera RVC-1, inc. 5-inch TFT monitor

of the very best quality, 10 m professional harness and installation material.*

Set 5BD 009 690-001

Monitor: 034873

� High temperature resistance: -40° to

+85° C

� Variable attachment possibilities (e .g.

on tailgates, spoilers, handle strips)

� Compact TFT monitor with 12.6 cm

diagonal screen size. Also suitable for

connection to other video sources

(DVD, DVB-T etc.).

� High-grade digital image recording

1/3 inch CMOS with 250,000 pixel

� The camera can also be connected to

displays already in the vehicle

� Image signal: NTSC

� Minimum dimensions

(W x H x D with bracket:

56 x 47 x 38 mm)

� Is automatically activated when reverse

gear is engaged

� Very large visible range

92° vertical and 120° horizontal

� High night vision ability

� Extremely high vibration resistance

Representation of the situation behind the vehicle For motor homes For mobile home extensions

Surface-mounting housing

RVC-1 solo 9BG 169 974-001

RVC-1 in combination with safety stoplight 9BG 169 975-001

Rear view camera RVC-1

inc. installation material 5BD 166 175-001

Camera: 034874

* Optionally available: cinch cable adapter

for camera 8KB 169 080-001

for monitor 8KB 169 079-001

10 m supplementary cable set 8KB 166 530-001

63

Ac

ce

sso

rie

s

IBScontrol: Intelligent Battery Sensor with colour displayWhich motor home or caravan enthusiast hasn’t experienced

the problem? Shortly before the holiday starts, the caravan or

motor home battery is completely charged. The fi rst few days of

the holiday are OK, but then the battery suddenly gives up the

ghost. That's the end of it! There are a multitude of possible

reasons. For one thing, vehicles contain more and more

consumers. In addition, as batteries get older, they are no longer

able to be charged up to 100% of their nominal capacity. Hella’s

IBScontrol measures the actual battery capacity still available

and shows it clearly on a colour display.

The IBScontrol reduces battery risk to a minimum:

� Permanent monitoring of the battery

� The most important information at a glance

� Precision due to battery-specifi c adjustment

� Energy management of consumers

� Intuitive control

� Very simple mounting thanks to plug-and-play installation

1. Remaining running time

Shows the remaining running

time with current

consumption value

2. Current display

Red = discharging

Green = charging

3. Current as numerical value

Example: Current drain 0.1 A

4. Battery aging

(SOH = State of Health)

Example: The original battery

capacity has already been

reduced by 2 %

5. Charge state

(SOC = State of charge)

Current state of charge

of the battery

Example: Charge state 88 %

IBScontrol: the detailsIBScontrol: the details

� Intelligent battery sensor with colour display for

12 V vehicle electric systems

� Connection of one or two batteries possible

� Precise determination and representation of battery capacity,

aging and remaining running time.

� Convenient retrofi t energy management

� Extremely low current consumption thanks to automatic

switch-off feature

� Four switch outputs and buzzer can be programmed

individually, including hysteresis

� Battery-specifi c adjustment of the system by selecting the

respective battery characteristic curves (standard starter, gel

and AGM)

� Data logging on SD-card with simple evaluation possibility

� Surface-mounted or fl ush-mounted version

1 4

23 5

64

IBScontrol: the variants

IBScontrol Set with display for surface-mounting variant

IBScontrol display (high-sheen, black), battery sensor IBS, battery pole adapter,

completely pre-fitted harness, operating/mounting instructions (CD-ROM),

installation material (screw, cable tie, support plates depending on variant)

Surface-mounting version 6PY 178 103-811

IBScontrol Set with display for flush-mounting variant

IBScontrol display (high-sheen, black), battery sensor IBS, battery pole adapter,

completely pre-fitted harness, operating/mounting instructions (CD-ROM),

installation material (screw, cable tie, support plates depending on variant)

Flush-mounting version 6PY 178 103-831

IBScontrol extension set

Extension set to monitor second battery, battery sensor IBS, battery pole

adapter, completely pre-fitted harness

Set 6PY 178 103-841

65

Ac

ce

sso

rie

s

Accessories

Battery circuit-breaker

for flush or surface-mounting, removable side wall –

several switches can be connected together, cable

connection: 2 x M10 screws, protective rating IP 56

according to DIN 40 050, load capacity: 225 A

(permanent load) at 12 V / 24 V, max. 1000 A (10 s) at

12 V / 24 V, central contact (58L / 7) with contact pin,

load capacity: 20 A at 12 V

6EK 002 843-071

Battery circuit-breaker

max. load: 1000 A at 12 V (10 s), 500 A at 24 V

(10 s) , max. permanent load: 50 A with connected

35 mm cable

Type of protection DIN 40050, IP X2 6EK 002 843-002

Series of rocker switches

without illumination, with

orientation lighting or with

functional lighting

6EH 007 832-…

Switch with symbol for steps 6EH 354 100-…

The entire range of switches can be found in the

main Hella Electrics catalogue.

Door-contact switch

Load capacity: 0.4 A at 12 V

6ZF 007 239-001

Socket/plug

7-pole in accordance with ISO 1724, plastic

version, screw connections, 12 V

Connector socket 8JB 001 943-003

Connector 8JA 001 930-003

Cable adapter

from 13-pole socket (ISO 11 446) on the traction

vehicle to 7-pole connector (ISO 11 446) on the

trailer, with cable 250 mm long

12 V 8JA 005 952-001

Super-short adapter

from 13-pole socket (ISO 11 446) on the traction


trailer

12 V 8JA 008 969-001

Connector socket

13-pole in accordance with ISO 11 446, plastic

version, screw connections, 12 V

with rubber grommet

and rubber seal in

hinged cover

8JB 005 949-001

with rear fog light switch-

off

8JB 005 949-011

Mini-short adapter

from 7-pole socket (ISO 1724) on the traction


trailer

12 V 8JA 008 981-001

Socket

2-pole in accordance with ISO 4165, 6.3 mm male

spade connectors, load capacity:

max. 16 A, 6-24 V

a) with spring-loaded

cover

8JB 001 946-082

b) with arresting cover 8JB 001 946-092

Socket

2-pole in accordance with ISO 4165, without

cover, 6.3 mm male spade connectors, load

capacity: max. 16 A

6 – 24 V 8JB 001 946-072

Connector

13-pole in accordance with ISO 11 446, plastic

version,

screw connections, with rubber grommet

12 V 8JA 005 951-001

a) b)

66

Accessories

Hazard warning light

model 3003 ACCU

when the engine is running, the rechargeable

battery is charged through contacts in the charging

bracket. Automatic voltage switchover to match

vehicle electric system 12/24 V, operating time in

flashing mode 40 hours or 7 hours as worklight,

charging bracket and lead-gel rechargeable battery

included in the scope of supply

type-tested 2XW 007 146-011

Hand lamp

with 11 Watt PL-tube, impact-proof protective

tube, handle and cap made of oil and petrol-

resistant rubber, length 44 cm, protective rating

IP 64

Protection class II 2XM 001 974-051

Universal connector

2-pole with screwed tension relief and 8A fuse,

suitable for cigarette lighters and standard sockets

(ISO 4165), screw connection up to 2.5 mm

6 – 24 V 8JA 007 589-001

Power socket

2-pole with cover and clamping sleeve, suitable for

cigarette lighter socket, 6.3 mm male space

connectors, load capacity: max. 16 A

6 – 24 V 8JB 008 023-001

Connector

2-pole in accordance with ISO 4165

6 – 24 V 8JA 002 262-001

Hazard warning light

model 3003 ACCU

with attachment bracket (for battery operation

through 5 mono cells, not included in the scope of

supply)

type-tested 2XW 007 146-001

Surface-mounted socket

2-pole in accordance with ISO 4165, screw

connections,

load capacity: max. 16 A

6 – 24 V 8JB 004 123-001

Battery charger Turbo-Charger

CE-tested, 230 V / 50 Hz / 350 W,

normal charge 9 A, fast charge 17 A,

safe operation thanks to overload protection

8ES 004 417-031

Battery charger Power-Charger

10 automatic

CE-tested, 230 V / 50 Hz / 130 W,

normal charge 7 A, fast charge 10 A,

automatic switch-off, safe operation thanks to

overload protection

8ES 004 417-041

Battery charger Mini-Charger

automatic 6/12 V

CE-tested, 230 V / 50 Hz / 10 W, charging current at

6 V = 0.8 A or at 12 V = 0.6 A, automatic switch-

off, suitable for gel batteries, with inverse polarity

protection

8ES 006 266-011

LE'D hand lamps

Cable length 5000 mm

42 LEDs, 220 V 2XM 001 974-201

30 LEDs, 12 V 2XM 001 974-211

60 LEDs, 12 V 2XM 001 974-221

Boxes of spare bulbs

A must for every responsible camper. The

assortment contains one bulb each for the most

common lighting functions as well as various spare

fuses.

H4, 12 V 8GJ 002 525-913

H9, 12 V (not shown) 8GH 007 157-901

67

Ac

ce

sso

rie

s

© Hella KGaA Hueck & Co., Lippstadt 9Z2 999 130-037 Sch/09.10/1.7 Printed in Germany

Ideas today forthe cars of tomorrow

Hella KGaA Hueck & Co.Rixbecker Straße 7559552 Lippstadt, Germany

Tel.: +49 2941 38-0Fax: +49 2941 38-7133Internet: www.hella.com

Caravan Prospekt 2010 GB HKG

Documents

Transcript of Caravan Prospekt 2010 GB HKG