cara Mill CAM 5 smart Strategieoptionen / Strategy …...cara Mill CAM 5 smart –Strategieoptionen...
Transcript of cara Mill CAM 5 smart Strategieoptionen / Strategy …...cara Mill CAM 5 smart –Strategieoptionen...
Giving a hand to oral health.
cara Mill CAM 5 smart
Strategieoptionen / Strategy options
Version 2017/09
cara Mill CAM 5 smart – Strategieoptionen / Strategy options
Kulzer GmbH • Leipzigerstr. 2 • D-63450 Hanau Tel: +49 (0) 6181 413 9999 • Email: [email protected]
2017/09, W19357 2
cara Mill CAM 5 smart – Strategieoptionen / Strategy options
Kulzer GmbH • Leipzigerstr. 2 • D-63450 Hanau Tel: +49 (0) 6181 413 9999 • Email: [email protected]
Objekttypen und ihre Strategien
• Die einzelnen Objekttypen, die beim Einfügen eines Jobs in iCAM V5 zur Auswahl stehen, besitzen unterschiedliche Strategieoptionen
• Diese Anleitung soll eine Übersicht über die Unterschiede geben und erklären wie die einzelnen Strategieoptionen genutzt werden
2017/09, W19357 3
Object types and their Strategies
• The different object types, which you can choose whileinserting jobs into iCAM V5, have unique strategy options
• This manual will give an overview on the differences andexplain how to use individual strategy options
cara Mill CAM 5 smart – Strategieoptionen / Strategy options
Kulzer GmbH • Leipzigerstr. 2 • D-63450 Hanau Tel: +49 (0) 6181 413 9999 • Email: [email protected]
Unterschiede der Objekttypen
2017/09, W19357 4
Differences of the object types
Hinterschnitte in Schiene undercuts in splint
kl. Bereiche okklusal 1mm small areas occlusal 1mm
kl. Bereiche in Schieneokklusal 0,6mm
small areas in splint occlusal 0,6mm
Sec Richtung okklusal sec direction occlusal
Hinterschnitte okklusal undercuts occlusal
Fissuren 0,6mm fissures 0,6mm
Fissuren partiell 0,6mm fissures partial 0,6mm
Kavität 0,6mm cavity 0,6mm
Fissuren 0,3mm fissures 0,3mm
Fissuren partiell 0,3mm fissures partial 0,3mm
1,5mm Shaft Werkzeug 1,5mm shaft tool
Kavität 5-achsig cavity 5-axis
Kavität 3+2-achsig cavity 3+2-axis
cara Mill CAM 5 smart – Strategieoptionen / Strategy options
Kulzer GmbH • Leipzigerstr. 2 • D-63450 Hanau Tel: +49 (0) 6181 413 9999 • Email: [email protected]
Strategieoptionen
1. 2,5mm Schruppen
2. 4,0mm Schruppen
3. Fräsen von Hinterschnitten in der Schiene
4. Okklusal kleine Bereiche mit 1mm Werkzeug
5. Kleine Bereiche in der Schiene mit 0,6mm Werkzeug
6. Sec Einschubrichtung von okklusal
7. Hinterschnitte fräsen von okklusal
8. Fissuren fein mit 0,6mm Werkzeug
9. Fissuren fein partiell mit 0,6mm Werkzeug
10. In der Kavität mit 0,6mm Werkzeug
11. Fissuren extra fein mit 0,3mm Werkzeug
12. Fissuren extra fein partiell mit 0,3mm Werkzeug
13. Fräsen mit 1,5mm Shaft Werkzeug
14. Haltestifte bearbeiten
1. 2,5mm roughing
2. 4,0mm roughing
3. Milling undercuts inside bite splints
4. Occlusal small areas with 1mm tool
5. Small areas inside bite splints with 0,6mm tool
6. Sec direction from occlusal
7. Milling undercuts from occlusal
8. Fissures fine with 0,6mm tool
9. Fissures fine partial with 0,6mm tool
10. Inside cavity with 0,6mm
11. Fissures extra fine with 0,3mm
12. Fissures extra fine partial with 0,3mm tool
13. Milling with 1,5mm shaft tool
14. Edit holders
2017/09, W19357 5
Strategy options
cara Mill CAM 5 smart – Strategieoptionen / Strategy options
Kulzer GmbH • Leipzigerstr. 2 • D-63450 Hanau Tel: +49 (0) 6181 413 9999 • Email: [email protected]
• Auswahl zwischen 4mm (T30) oder 2,5mm Werkzeug zum Schruppen
• Dies Auswahl gibt es nur bei PMMA, PEEK und Wachs
• T30 nur mit 6mm Schaft
• Vorteil T30: kürzere Fräszeit
• Selection between 4mm (T30) and 2,5mm tool to use forroughing
• This selection exists only for PMMA, PEEK and Wax
• T30 is with 6mm shaft
• Pro T30: less milling time
2017/09, W19357 6
1. 2,5mm roughing
2. 4,0mm roughing
1. 2,5mm roughing
2. 4,0mm roughing
cara Mill CAM 5 smart – Strategieoptionen / Strategy options
Kulzer GmbH • Leipzigerstr. 2 • D-63450 Hanau Tel: +49 (0) 6181 413 9999 • Email: [email protected]
3. Fräsen von Hinterschnitten in der Schiene
• Benutzen Sie die Option für Arbeiten, bei denen Hinterschnitteauf der Innenseite (Passungsseite) vorhanden sind
• Diese Auswahl gibt es nur bei PMMA, PEEK und Wachs
• Use this function for jobs which have undercuts on the inside(fitting)
• This selection exists only for PMMA, PEEK and Wax
2017/09, W19357 7
3. Milling undercuts inside bite splints
cara Mill CAM 5 smart – Strategieoptionen / Strategy options
Kulzer GmbH • Leipzigerstr. 2 • D-63450 Hanau Tel: +49 (0) 6181 413 9999 • Email: [email protected]
4. Okklusal kleine Bereiche mit 1mm Werkzeug
• Hier werden feine Bereiche auf der Oberseite bearbeitet, die der 2,5mm Fräser nicht erreichen konnte
• Diese Auswahl gibt es nur bei PMMA, PEEK und Wachs
• Fine areas on the outside will be processed which the 2,5mm burr could not reach
• This selection exists only for PMMA, PEEK and Wax
2017/09, W19357 8
4. Occlusal small areas with 1mm tool
cara Mill CAM 5 smart – Strategieoptionen / Strategy options
Kulzer GmbH • Leipzigerstr. 2 • D-63450 Hanau Tel: +49 (0) 6181 413 9999 • Email: [email protected]
5. Kleine Bereiche in der Schiene mit 0,6mm Werkzeug
• Hier werden feine Bereiche auf der Innenseite (Passungsseite) bearbeitet, die der 1mm Fräser nicht erreichen konnte
• Diese Auswahl gibt es nur bei PMMA, PEEK und Wachs
• Fine areas on the inside (fitting) will be processed which the1mm burr could not reach
• This selection exists only for PMMA, PEEK and Wax
2017/09, W19357 9
5. Small areas in the bite splint with 0,6mm tool
cara Mill CAM 5 smart – Strategieoptionen / Strategy options
Kulzer GmbH • Leipzigerstr. 2 • D-63450 Hanau Tel: +49 (0) 6181 413 9999 • Email: [email protected]
6. Sec Einschubrichtung von okklusal
• Benutzen Sie diese Option für Arbeiten, bei denen sich ein Sekundäreinschub von okklusal ermitteln lässt
• Achsen A und B werden in sekundäre Einschubrichtung angestellt
• Achsen X, Y und Z arbeiten simultan
• Use this option for jobs for which you can determine a secondary insert direction from occlusal
• Axes A and B will be set to the secondary insert direction
• Axes X, Y and Z will work simultaneously
2017/09, W19357 10
6. Sec insert direction from occlusal
cara Mill CAM 5 smart – Strategieoptionen / Strategy options
Kulzer GmbH • Leipzigerstr. 2 • D-63450 Hanau Tel: +49 (0) 6181 413 9999 • Email: [email protected]
7. Hinterschnitte fräsen von okklusal
• Benutzen Sie diese Option für Arbeiten, bei denen Hinterschnitte auf der Außenseite vorhanden sind
• Use this option for jobs which have undercuts on the outside
2017/09, W19357 11
7. Milling undercuts from occlusal
cara Mill CAM 5 smart – Strategieoptionen / Strategy options
Kulzer GmbH • Leipzigerstr. 2 • D-63450 Hanau Tel: +49 (0) 6181 413 9999 • Email: [email protected]
8. Fissuren fein mit 0,6mm Werkzeug
• Hier werden feine Bereiche auf der Oberseite bearbeitet, die der 1mm Fräser nicht erreichen konnte
• Fine areas on the outside are processed which the 1mm millcould not reach
2017/09, W19357 12
8. Fissures fine with 0,6mm tool
cara Mill CAM 5 smart – Strategieoptionen / Strategy options
Kulzer GmbH • Leipzigerstr. 2 • D-63450 Hanau Tel: +49 (0) 6181 413 9999 • Email: [email protected]
9. Fissuren fein partiell mit 0,6mm Werkzeug
• Hier werden feine Bereiche auf der Oberseite bearbeitet, die der 1mm Fräser nicht erreichen konnte
• Hier muss zusätzlich mit einem Lasso der zu bearbeitende Bereich markiert werden
• Fine areas on the outside are processed which the 1mm millcould not reach
• The area to be processed has to be defined by an extra spline
2017/09, W19357 13
9. Fissures fine partial with 0,6mm tool
cara Mill CAM 5 smart – Strategieoptionen / Strategy options
Kulzer GmbH • Leipzigerstr. 2 • D-63450 Hanau Tel: +49 (0) 6181 413 9999 • Email: [email protected]
10. In der Kavität mit 0,6mm Werkzeug
• Hier werden feine Bereiche in der Kavität bearbeitet, die der 1mm Fräser nicht erreichen konnte
• Fine areas in the cavity are processed which the 1mm millcould not reach
2017/09, W19357 14
10. Inside cavity with 0,6mm tool
cara Mill CAM 5 smart – Strategieoptionen / Strategy options
Kulzer GmbH • Leipzigerstr. 2 • D-63450 Hanau Tel: +49 (0) 6181 413 9999 • Email: [email protected]
11. Fissuren extra fein mit 0,3mm Werkzeug
• Hier werden feine Bereiche auf der Oberseite bearbeitet, die der 0.6mm Fräser nicht erreichen konnte
• Fine areas on the outside are processed which the 0.6mm millcould not reach
2017/09, W19357 15
11. Fissures extra fine with 0,3mm tool
cara Mill CAM 5 smart – Strategieoptionen / Strategy options
Kulzer GmbH • Leipzigerstr. 2 • D-63450 Hanau Tel: +49 (0) 6181 413 9999 • Email: [email protected]
12. Fissuren extra fein partiell mit 0,3mm Werkzeug
• Hier werden feine Bereiche auf der Oberseite bearbeitet, die der 0.6mm Fräser nicht erreichen konnte
• Hier muss zusätzlich mit einem Lasso der zu bearbeitende Bereich markiert werden
• Fine areas on the outside are processed which the 0.6mm millcould not reach
• The area to be processed has to be defined by an extra spline
2017/09, W19357 16
12. Fissures extra fine partial with 0,3mm tool
cara Mill CAM 5 smart – Strategieoptionen / Strategy options
Kulzer GmbH • Leipzigerstr. 2 • D-63450 Hanau Tel: +49 (0) 6181 413 9999 • Email: [email protected]
13. Fräsen mit 1,5mm Shaft Werkzeug
• Benutzen Sie diese Option für Arbeiten bei denen sich 90°Stufen (Innenwinkel) am Interface befinden.
• Use this option for jobs with 90° steps (interior angles) on theinterface
2017/09, W19357 17
13. Milling with 1,5mm shaft tool
cara Mill CAM 5 smart – Strategieoptionen / Strategy options
Kulzer GmbH • Leipzigerstr. 2 • D-63450 Hanau Tel: +49 (0) 6181 413 9999 • Email: [email protected]
14. Haltestifte bearbeiten
• Grüne Haltestifte werden ganz abgetrennt
• Rote Haltestifte werden nur angetrennt
• Green sprues will be cut of completely
• Red sprues will be cut partially
2017/09, W19357 18
14. Edit holders