car speed control using bluetooth
-
Upload
praveenshilvant -
Category
Automotive
-
view
124 -
download
0
Transcript of car speed control using bluetooth
BASAVAKALYAN ENGINEERING COLLEGE BASAVAKALYAN
MECHANICAL DEPARTMENT
Seminar topic:
“CAR SPEED CONTROL USING BLUETOOTH”
PRESENTED BY RAHUL GURJARUSN NO: 3BK12ME071
GUIDED BY : PROF. SHIVAJI
Contents Contents IntroductionAccidentEffectsStatisticsBluetooth EquipmentWorkingComponentsOperationAutomatic braking pump and valves Automatic braking systems Functions of hydraulic valvesconclusion
World is plagued by accidents.
Human errors
Need an alert for the driver
Checking the speed of the car is important
STATISTICS1 2 3
4
5
61 person dies every 6 minutes 10 are injured in the same frame Indias share of global car accidents is 10%
6% of the worlds road accident deaths happen in India.
12
34
BLUETOOTH
Bluetooth can communicate with 8 other devices simultaneously
Hence we can check the speed of 8 cars simultaneously
Range of communication is up to 100 meters of each other
100 mts
Equipment
The group of 8 devices is known as PICONET.
PICONET is a collection of master and slaves .
The frequency of 2.4GHz is shared among all the devices in the piconet.
Equipment Master is a device which controls all the devices around it.
Slave is a device which is being controlled by a master.
• Here A,B are masters and S1 to S6 are the slaves.
>100 mts.
• If the distance between two vehicle is within the 100m the Bluetooth devices get enabled.
<=100 mts.
• Short distance, low power radio operating in the unlicensed spectrum of 2.4 GHz and using a nominal antenna power of 20 dBm.
• At the 20 dB the range is 100 meters, meaning equipment must be Within 100 meters to each other (about 328 feet) to communicate using the Bluetooth standard.
• With the help of this technology we can send data to the eight devices.
Automatic braking pump and valves
A computer constantly monitors the distance between each of these cars
When its senses that the car is getting too close it moves the hydraulic valves to increase pressure on the braking circuit
It effectively increasing the braking force on the wheels
• Controls the speed of the car.
control signal controller
Travelling car braking system
start stop
AUTOMATIC BRAKING SYSTEM
FUNCTIONS OF HYDRAULIC VALVES
In position one the valve is opening ,pressure from the master cylinder is passed right through to the brake.
In position two the valve blocks the line ,isolating that brake from the master cylinder
This prevents the pressure from rising further should the driver push the brake pedal harder
In position three, the valve releases some of pressure from the brake
Advantage
It reduces the accident rate
It gives the alert to driver
Its maintenance is low
This technology gives safety
Disadvantage
Every car must and should have Bluetooth to communicate with each other
Due to the automatic braking system the throttle valve get damage
The automatic braking system is some what costlier
• The Bluetooth technology is being widely adopted by the Industry leaders.
• The possibility for new applications is very exciting with this Versatile technology.
• It provides a simple, logical answer to all the Problems-which is built a single common radio into every mobile computer.
• It neither do companies have to worry about WAN, nor do communication companies need to worry about building external cables.
CONCLUSION