8/4/2019 Car Record Camera Manual

1/2

User ManualThank you for using our company's

products,please read the user manualcarefully before using this product. Whenyou start to use this equipment, webelieve that you have read the usermanual carefully.

AttentionsSecure Startup: Avoid turning on

the equipment in the very dry orhumid environment, to preventdamaging of the equipment

Using qualified maintenanceservices:Only qualifiedmaintenance personnel can repairthe equipment, Pleasedo notdismantle the equipment byyourself

Connected to other devices:When connected to other

equipments, please read theusermanual of the equipment to obtaindetailed safety instructions, do notconnect to other device that theequipment not equipped with.

Backup Important data of thisequipment please do a back up, anyerror operationa l methodsresulting in paper loss,thecompany shal l not beresponsible for.

Host Interface

8/4/2019 Car Record Camera Manual

2/2

to Pposition, short press key once,the blue light flashes meas that the photoshooting is completed and has beenautomatic return to the standby mode, formore photos,please repeat the aboveoperation.

TV OUTUse the matching TV cable,connect this device with the equipmentwhich supported by AV IN, press enterinto TV OUT state. After that, pressagain then can view next file, when

viewing the video file, press key toplay the current video file. When playingvideo files, short pressonce to stop theplay and change to reverse play status,press to reverse play.

Power OffNo connect vehicle power,press key for two seconds, all the lightsare off, means that equipment has beenpower off . If you disconnect the vehiclepower, the device will automatic power offafter ten seconds.

Note: When the vehicle power connectwith this equipment,please do not turn off

by manual or Reset the equipment.

Time watermarks:Video files with timewatermarks. it can be modified, we did notadjust the time of equipments when itcomes from factory, if you found it is notaccurate , it's easy to adjust by yourself,just use the USB cable and connect theequipment to the computer, After thecomputer dispay that found the movabledisk(muse be insert identifiable TF card),run the CD-ROM, and double clik the file

"Time.bat" to run, then the equipmentautomatic change the time to thedisplay-time of computer. After that,pullout equipment from computer, thenrestart and power off once. Themodification of time is f inished.

PC Camera:Presskey and hold it,insert the computer USB, then enter thePC Camera Mode.

Charging:In the course of using, if redlight twinkling constantly, means that theelectric volume of the host is low, this