Car  Locksmith:  How  to  Open  a  Locked  Car  without  Your  Keys    

This method may save you lots of money. Learn how to unlock a car when the keys are inside, now!

There are times when we get so busy and preoccupied with life that we forget simple things that we do daily every now and then, like taking the keys from the ignition before locking the car. With even just a millisecond of brain lapse, getting locked out of your car can definitely ruin your entire day. Imagine all the frustrations and worries that may go through your mind, not to mention the money that you’ll need to spend for calling for a car locksmith. However, there are steps on how to escape this stressful ordeal. Knowing how to unlock your car door when the keys are inside will make the situation more bearable and will save you lots of money by not having to break any windows. Here’s how to open a locked car without your keys: Steps

1. Straighten a wire coat hanger from its original form. Unbend it as straight as possible.

2. Bend a loop at the hook end of the hanger. This step may apply to cars that have pull up locks situated by the window. If your car has a pull-up lock, skip to step 4 after accomplishing this step. If your car has a pull out lock or unlocks when the inside door handle is pulled, proceed to step 3.

3. Bend a smaller hook at the end of the hanger that will be easier to manipulate.

4. Sneak the reshaped wire coat hanger in between the top of your car door and the roof. Be careful not to tear the rubber insulation that will be in your way by easily inching the modified wire coat hanger. Since cars were not designed to be unlocked from the outside, getting the hanger through may need good amounts of patience and finesse.

5. Drive the reshaped coat hanger down until the loop reaches the lock. Navigating the coat hanger is complicated, so pay close attention on how the hanger reacts when you turn and twist it. Maneuver the hanger into position with the lock.

6. Position the loop over the top of the lock. This step applies to cars with pull up locks. If your car has a pull out lock or unlocks when the inside door handle is pulled, skip to step 8.

7. As you position the loop over the top of the lock, twist it so it will not slip off when you pull the hanger up. Once the loop is securely in position, pull the hanger up and see if the lock pops up.

8. Fit the hook under the lock or under the handle, if your car door unlocks by pulling the inside door handle. Once the hook is in place, pull the hanger until the hook pushes the lock in the unlocked position, or until the handle is pulled to open the door.

9. If all attempts fail, contact a professional car locksmith. Since the prices and skills of locksmiths may vary, finding one that fits your needs will be simple. But be sure to only work with a qualified locksmith. Locksmith Sutton, for instance, can help you solve the incredibly frustrating problem of being locked out of your own car at very affordable prices. When looking for a locksmith, Epsom is a good place to search for one.