Car Care leaflet
Transcript of Car Care leaflet
Car Care
The technology of the surfactants applied to the care of your vehicle
Automatic Wash Manual Wash Drying-aids High Pressure Cleaning Complementary Cleaning
GGuuiiddeelliinnee ffoorrmmuullaarryy
Kao Corporation, S.A. Puig dels Tudons, 10
E-08210 Barberà del Vallès (Barcelona) Spain
Tel: +34 93 7399-300 Fax: +34 93 7399-377
e-mail:[email protected]
Kao Chemicals GmbH Kupferstrasse 1
D-46446 Emmerich, Germany Tel: +49(0)2822711-0
Fax: +49(0)2822 711-201 e-mail: [email protected]
KKaaoo CChheemmiiccaallss EEuurrooppee www.kaochemicals-eu.com
Our Chemicals, Your Business
Our mission is “to strive for the wholehearted satisfaction and enrichment of the lives of people globally” through the Company’s core domain of value added chemicals. Fully committed do this mission, all members of the Kao Group work together with passion to provide products of excellent value created from customer’s perspective. In so
doing, we “share joy with the customer”.
Mission
Vision
TThhee KKaaoo WWaayy
We aim to be “a global group of companies that is closest to the customer in each market”, earning the respect and trust of all stakeholders and contributing to the sustainable
development of society.
Guideline Formulations
5 rim cleaner
During the first step most of the grime, road-film and large dirt particles are removed from the paintwork by spraying a high alkaline solution over the car in combination with the high pressure effect. The solution contains chemicals that begin loosening the roughest dirt which will be later removed entirely by means of the products applied in later steps , together with the action of the brushes. After the pre-wash, the surface of the car is wet down and prepared for the application of the detergents. The cleaning power required for the pre-wash is highly dependent on the degree and nature of dirt, which varies among different geographical zones, seasons and type of
vehicle to be washed.
The combination of foam-forming surfactants, water and air creates a dense lather that covers the paintwork entirely, acting intensively during this period. Active foam ensures an outstanding cleaning action, while gently breaking down the dirt which has been left behind, carrying it away from the surface. The dirt is kept in suspension, which facilitates rinsing later. The chemical mixture typically contains some coloring agent, to make the
foam more obvious and pleasing to the eye.
This chemical blend, thanks to its hydrophobic character, reduces the surface tension of the water remaining from the rinse-off detergents; which creates an instantaneous water layer break. The water shrinks, forming large drops that are easily carried away from the paintwork by the effect of the blower. An efficient rinse-aid agent helps to reduce spotting and minimum wipe-down time can be achieved.
The shampoo plays an important role. Besides cleaning, it softens the surface of the paintwork, thereby maximizing the mechanical action of the brushes and protecting it from scratching. After applying the shampoo, the surface takes the acidic
character, which necessary for the optimal performance of the rinse-aid agent.
active foam 2
3 shampoo
1 pre-wash
This cleaning sequence can be applied to both automatic tunnels and roll-overs. However, these can take
different configurations and may offer more complex cleaning programs than the explained here.
Polishing is usually optional in most carwash tunnels. The objective of this step is to cover the scratches that the paintwork might have, providing an even surface. This process, apart from protecting, leaves the surface in better physical condition for applying the
rinse-aid and protection waxes.
polishing 4
Guideline Formulations the washing process
rinse-aid 6
Rims are particularly prone to dirt from the abrasive wear of the braking system. The rims should therefore be cleaned regularly, not only from an aesthetic point of view, but also because of the possible damage that can be caused by abrasion particles “burning” into the rims. The effect of the wheel brushes in standard automatic carwashes, are generally
not efficient. A specific chemical cleaner is often required.
blower
Formulation Components
% Active Matter Appearance at 20ºC Chemical Description Trademark
Sodium Laureth Sulfate Sodium Laureth Sulfate Dodecylbenzene Sulfonic Acid
Sodium α-Olefin Sulfonate Laureth-6 Carboxylic Acid
Sodium Cumen Sulfonate
EMAL® 227 E or 228D EMAL® 270 E or 270D SULFONAX® ALFANOX® 46 AKYPO® RLM 45 CA
MELIOSOL® CU-40
≈ 27
≈ 70 95 min.
≈ 37
≈ 92
40
Liquid Paste Liquid Liquid Liquid
Liquid
aanniioonniicc ssuurrffaaccttaannttss
% Active Matter Appearance at 20ºC Chemical Description Trademark
Isotrideceth-9
Glycerides, C8-10, Ethoxylated(7) Cocamidopropylamine Oxide
Laureth-4 / Myreth-4 PEG-40 Castor Oil Cetyl Octanoate Deceth-6
FINDET 13/21
EMANON XLF
OXIDET L-75 C
FINDET 1214N/16
FINDET AR/52
EXCEPARL HO
FINDET 10/18
≈ 100
≈ 100
≈ 33
≈ 100
≈ 100
≈ 100
≈ 100
Opaque paste Liquid Liquid Liquid Viscous liquid Liquid
Liquid
nnoonn--iioonniicc ssuurrffaaccttaannttss
% Active Matter Appearance at 20ºC Chemical Description Trademark
Cocamidopropyl Betaine BETADET HR ≈ 30 Liquid
aammpphhootteerriicc ssuurrffaaccttaannttss
% Active Matter Appearance at 20ºC Chemical Description Trademark
Steartrimonium Chloride
Oleic TEA quat Alkyl Trimethyl Ammonium Methosulfate
QUARTAMIN TH-V
TETRANYL CAR/AO
TETRANYL DM-24
≈ 50
≈ 90
≈ 30
Liquid Liquid
Liquid
ccaattiioonniicc ssuurrffaaccttaannttss
% Active Matter Appearance at 20ºC Chemical Description Trademark
Non-ionic surfactants Anionic Surfactants and Polymers Waxes, Polymers and Non-ionic
..Surfactants
DANOX DB-1
AKYPO GENE KTS
EMULSION AF-400
≈ 78
≈ 31
≈ 33
Liquid Opaque Liquid
Opaque Liquid
bblleennddss
all surfactants are Readily Biodegradable according to European regulation 648/2004/EC
All formulations have been submitted succesfully at 1month stability at 5ºC/RT/40ºC.
www.kaochemicals-eu.com
pre-wash
Guideline Formulations automatic washing
active foam
3300 –– 5500 mmLL
11::5500
1100 –– 1155 mmLL
11::550000
5 4/S 3
1/S 2/S 6/S
0
Alkaline D-137 (*)
3.0 2.0 5.0 3.2 3.0 e.q.
up to 100%
AKYPO® RLM 45 CA FINDET® 13/21 MELIOSOL® CU-40 TRILON M (40%) TPPNa NaOH (50%)
Deionized water
12.0 – 12.5 pH
Regular Wash
6/S 5 4
7/S 2
3/S 1/S
0
Alkaline D-138
3.0 3.0 2.1 e.q. 4.0 3.0 3.0
up to 100%
DANOX® DB-1 FINDET® 13/21 TETRANYL® DM-24 NaOH (50%) TRILON M (40%) TPPNa Na2SiO3·5H2O
Deionized water
≈ 13.0 pH
Energic Wash
For the toughest grime, D-138 offers the most outstanding solution. Containing DANOX® DB-1, the emulsifying properties are enhanced and the cleaning power of the formulation makes it a secure option for all kinds of dirt. D-137 is the ideal choice for a lower level of demand, without renouncing the quality of surfactants. Dilution for manual application can range from 0.5% to 5%. For automatic wash, regulate the pump flow to have the same concentration as in manual. Leave the dilution in contact with the surface for two or three minutes, and rinse it off completely with water.
2 3
1/S 4
5/S 0
Neutral D-141
30.0 10.0 4.0 e.q. e.q.
up to 100%
EMAL® 227E or 228D ALFANOX® 46 EDTA·2Na NaOH (50%) Dye(s) Deionized water
≈ 7.0 pH
Cheap & Effective
When it comes to generating foam, the mixture of anionic surfactants is an effective and low-priced alternative (D-141). A more sophisticated foam, with higher quality and cleaning properties, can be achieved with the formulation D-143 thanks to the effect of the cocamidopropyl betaine. By adjusting the air/water ratio of the dossification pump, the foam volume ca be controlled.
3 4
1/S 2
5/S 6/S
0
Alkaline D-143
20.0 10.0 10.0 5.0 0.2 e.q.
up to 100%
ALFANOX® 46 BETADET® HR TRILON M (40%) TEA (100%) NaOH (50%) Dye(s)
Deionized water
12.0 – 12.5 pH
Premium Quality
Guideline Formulations automatic washing
other formulations
2200 –– 4400 mmLL
11::33 –– 11::55
6 7 2 5 1
4/8 2/S
3
Alkaline D-151
5.0 4.0 4.0 3.0 11.0 e.q. 3.0
up to 100%
ALFANOX® 46 FINDET® 13/21 AKYPO® RLM 45 BG TRILON M (40%) NaOH (50%) TPPNa
Deionized water
11.0 – 11.5
pH
High-Pressure
The application method for high pressure is the same as described in the pre-wash process.
3300 –– 5500 mmLL
11::5500
1 3 4
5/S
0
Acidic D-150
2.0 2.0 e.q. 2.0
up to 100%
FINDET® 13/21 QUARTAMIN® TH-V H3PO4 (85%) MELIOSOL® CU-40
Deionized water
< 1.0 pH
Rim Cleaner
Apply the dilution at high pressure over the rim surface, wait one to two minutes and rinse it off.
BG Butyl glycol BDG Butyl di-glycol PnB Propylene glycol n-buthyl ether NTA Nitrilotriacetic acid NTA·3Na Sodium nitrilotriacetate TPPNa Sodium tripolyphosphate NaOH Sodium hydroxide TEA Triethanolamine Silicone rinse1 DC-245 Silicone rinse2 DC-536 H3PO4 Phosphoric acid Na2SiO3·5H2O S odium methasilicate
ABBREVIATIONS
3300 –– 5500 mmLL
11::5500
formula consumption per car
formula dilution for application
(*) order of addition – S:stir
Guideline Formulations automatic washing
rinse-aid
shampoo 55 –– 1100 mmLL
11::11000000
88 –– 2200 mmLL
11::550000
3 4 1/S 2 5/S 0
Neutral D-139
10.0 5.0 5.0 2.0 e.q.
up to 100%
EMAL® 227E or 228D BETADET® HR TRILON M (40%) BDG Citric acid (50%) Deionized water
6.0 – 6.5
pH
Soft Shampoo
3 2 1 5/S 4 0
Acidic D-140
5.0 2.0 4.0 e.q. e.q.
up to 100%
AKYPO® RLM 45 CA SULFONAX® BDG H3PO4 (85%) Citric acid (50%) Deionized water
< 1
pH
Ready for drying
Should it become necessary to compensate a high pH of the waste water resulting from previous steps, an acidic shampoo has to be used (D-140). It also leaves the surface in the optimal condition for the rinse-aid application. If there are no pH restrictions, D-139 becomes a good alternative.
6
3 4 5 - 1 2
7
5
3 4 - 1 2 -
6
Deionized water up to 100%
continuous
stirring
14.0 8.0 1.0 -
5.0 7.5
1.0
D-145 D-146 D-145 D-146
13.3 4.0 -
10.5 3.5 -
1.0
TETRANYL® CAR/AO EXCEPARL® HO TETRANYL® DM-24 BG BDG PnB
Acetic acid (80%)
2-3 2-3 pH
Silicone and Oil free
7
3 4 - 5 1 2 - 8 -
6
9
3 4 5 - - 1 2 8 6
7
up to 100% Deionized water
continuous
stirring
14.0 7.0 2.4 - -
5.0 7.5 1.0 1.0
2.2
D-147 D-148 D-147 D-148
12.0 4.0 - 1 8.0 3.0 -
1.0 -
2.0
TETRANYL® CAR/AO EXCEPARL® HO TETRANYL® DM-24 FINDET® AR/52 BG BDG PnB Acetic acid (80%) Limonene
Silicone rinse1
2-3 2-3 pH
Oil free - Top Quality
The oleic esterquat offers an excellent hydrophobicity, assuring the transparency of the formulation at the same time. It is usually formulated in combination with the fatty ester (EXCEPARL® HO). D-145 is a simple but well performing formulation for the needs of certain tunnels. Formulation D-146, is recommended if a higher concentration of hydrophobics is required. D-170 is a premium rinse-aid formulation.
3 4 5 6 1 2 7 8 9
10/S
Acidic D-144
15.0 7.0 1.0 4.0 5.0 7.5 1.0 1.0 2.2
up to 100%
TETRANYL® CAR/AO EXCEPARL® HO TETRANYL® DM-24 QUARTAMIN® TH-V BDG PnB Acetic acid (80%) Limonene Silicone rinse1
Deionized water
2-3 pH
Foaming Wax
Guideline Formulations manual washing
manual washing
AKYPO® GENE KTS is a mixture of an ether carboxylate and a polymer that has a good cleaning action. Within a short time it dries into hard, solid needles that can easily be removed with a rag or by vacumming. It can be applied with a propellant, becoming an ideal product for the upholstery cleaning.
Carnauba wax is widely known for its surface protection properties. It also has a leveling effect, giving a glossy and new apperance to the surface.
2 3 4 5 6/S 0
1/S
Best care D-142
8.6 2.9 6.0 2.5 e.q. 4.0
up to 100%
SULFONAX® EMAL® 270E or 270D EMANON® XLF OXIDET® L-75 C NaOH (50%) TRILON M (40%)
Deionized water
8.0 pH
Manual Shampoo
D-142 combines an excellent foam volume with a very high degreasing power, enhanced by the presence of EMANON® XLF, a last generation surfactant. The almost neutral pH assures maximum protection of the paintwork and the skin.
1 2/S 3 4/S 5
0
Carnauba Wax D-153
25.0 5.0 e.q e.q e.q
up to 100%
EMULSION® AF-400 FINDET® 10/18 Preservative Fragrance Dye(s)
Deionized water
Wax Protection
1 2
3/S
D-152
20.0 79.5
0.5
AKYPO® GENE KTS Deionized water Na2.Hydrogen
Phosphate·2H2O
Up-holstery Cleaner
11::110000
3 4 5 1 2 8 6 7
D-170
14.0 7.0 1.0 5.0 6.5 1.0 3.0 42 40 18
up to 100%
TETRANYL® CAR/AO EXCEPARL® HO TETRANYL® DM-24 BDG PnB Acetic acid (80%) Premix A
Silicone rinse2 BDG Oleic fatty acid
Deionized water
2-3 pH
Premium Rinse-aid
Guideline Formulations automatic washing
rinse-aid
shampoo 55 –– 1100 mmLL
11::11000000
88 –– 2200 mmLL
11::550000
3 4 1/S 2 5/S 0
Neutral D-139
10.0 5.0 5.0 2.0 e.q.
up to 100%
EMAL® 227E or 228D BETADET® HR TRILON M (40%) BDG Citric acid (50%) Deionized water
6.0 – 6.5
pH
Soft Shampoo
3 2 1 5/S 4 0
Acidic D-140
5.0 2.0 4.0 e.q. e.q.
up to 100%
AKYPO® RLM 45 CA SULFONAX® BDG H3PO4 (85%) Citric acid (50%) Deionized water
< 1
pH
Ready for drying
Should it become necessary to compensate a high pH of the waste water resulting from previous steps, an acidic shampoo has to be used (D-140). It also leaves the surface in the optimal condition for the rinse-aid application. If there are no pH restrictions, D-139 becomes a good alternative.
6
3 4 5 - 1 2
7
5
3 4 - 1 2 -
6
Deionized water up to 100%
continuous
stirring
14.0 8.0 1.0 -
5.0 7.5
1.0
D-145 D-146 D-145 D-146
13.3 4.0 -
10.5 3.5 -
1.0
TETRANYL® CAR/AO EXCEPARL® HO TETRANYL® DM-24 BG BDG PnB
Acetic acid (80%)
2-3 2-3 pH
Silicone and Oil free
7
3 4 - 5 1 2 - 8 -
6
9
3 4 5 - - 1 2 8 6
7
up to 100% Deionized water
continuous
stirring
14.0 7.0 2.4 - -
5.0 7.5 1.0 1.0
2.2
D-147 D-148 D-147 D-148
12.0 4.0 - 1 8.0 3.0 -
1.0 -
2.0
TETRANYL® CAR/AO EXCEPARL® HO TETRANYL® DM-24 FINDET® AR/52 BG BDG PnB Acetic acid (80%) Limonene
Silicone rinse1
2-3 2-3 pH
Oil free - Top Quality
The oleic esterquat offers an excellent hydrophobicity, assuring the transparency of the formulation at the same time. It is usually formulated in combination with the fatty ester (EXCEPARL® HO). D-145 is a simple but well performing formulation for the needs of certain tunnels. Formulation D-146, is recommended if a higher concentration of hydrophobics is required. D-170 is a premium rinse-aid formulation.
3 4 5 6 1 2 7 8 9
10/S
Acidic D-144
15.0 7.0 1.0 4.0 5.0 7.5 1.0 1.0 2.2
up to 100%
TETRANYL® CAR/AO EXCEPARL® HO TETRANYL® DM-24 QUARTAMIN® TH-V BDG PnB Acetic acid (80%) Limonene Silicone rinse1
Deionized water
2-3 pH
Foaming Wax
Guideline Formulations manual washing
manual washing
AKYPO® GENE KTS is a mixture of an ether carboxylate and a polymer that has a good cleaning action. Within a short time it dries into hard, solid needles that can easily be removed with a rag or by vacumming. It can be applied with a propellant, becoming an ideal product for the upholstery cleaning.
Carnauba wax is widely known for its surface protection properties. It also has a leveling effect, giving a glossy and new apperance to the surface.
2 3 4 5 6/S 0
1/S
Best care D-142
8.6 2.9 6.0 2.5 e.q. 4.0
up to 100%
SULFONAX® EMAL® 270E or 270D EMANON® XLF OXIDET® L-75 C NaOH (50%) TRILON M (40%)
Deionized water
8.0 pH
Manual Shampoo
D-142 combines an excellent foam volume with a very high degreasing power, enhanced by the presence of EMANON® XLF, a last generation surfactant. The almost neutral pH assures maximum protection of the paintwork and the skin.
1 2/S 3 4/S 5
0
Carnauba Wax D-153
25.0 5.0 e.q e.q e.q
up to 100%
EMULSION® AF-400 FINDET® 10/18 Preservative Fragrance Dye(s)
Deionized water
Wax Protection
1 2
3/S
D-152
20.0 79.5
0.5
AKYPO® GENE KTS Deionized water Na2.Hydrogen
Phosphate·2H2O
Up-holstery Cleaner
11::110000
3 4 5 1 2 8 6 7
D-170
14.0 7.0 1.0 5.0 6.5 1.0 3.0 42 40 18
up to 100%
TETRANYL® CAR/AO EXCEPARL® HO TETRANYL® DM-24 BDG PnB Acetic acid (80%) Premix A
Silicone rinse2 BDG Oleic fatty acid
Deionized water
2-3 pH
Premium Rinse-aid
www.kaochemicals-eu.com
pre-wash
Guideline Formulations automatic washing
active foam
3300 –– 5500 mmLL
11::5500
1100 –– 1155 mmLL
11::550000
5 4/S 3
1/S 2/S 6/S
0
Alkaline D-137 (*)
3.0 2.0 5.0 3.2 3.0 e.q.
up to 100%
AKYPO® RLM 45 CA FINDET® 13/21 MELIOSOL® CU-40 TRILON M (40%) TPPNa NaOH (50%)
Deionized water
12.0 – 12.5 pH
Regular Wash
6/S 5 4
7/S 2
3/S 1/S
0
Alkaline D-138
3.0 3.0 2.1 e.q. 4.0 3.0 3.0
up to 100%
DANOX® DB-1 FINDET® 13/21 TETRANYL® DM-24 NaOH (50%) TRILON M (40%) TPPNa Na2SiO3·5H2O
Deionized water
≈ 13.0 pH
Energic Wash
For the toughest grime, D-138 offers the most outstanding solution. Containing DANOX® DB-1, the emulsifying properties are enhanced and the cleaning power of the formulation makes it a secure option for all kinds of dirt. D-137 is the ideal choice for a lower level of demand, without renouncing the quality of surfactants. Dilution for manual application can range from 0.5% to 5%. For automatic wash, regulate the pump flow to have the same concentration as in manual. Leave the dilution in contact with the surface for two or three minutes, and rinse it off completely with water.
2 3
1/S 4
5/S 0
Neutral D-141
30.0 10.0 4.0 e.q. e.q.
up to 100%
EMAL® 227E or 228D ALFANOX® 46 EDTA·2Na NaOH (50%) Dye(s) Deionized water
≈ 7.0 pH
Cheap & Effective
When it comes to generating foam, the mixture of anionic surfactants is an effective and low-priced alternative (D-141). A more sophisticated foam, with higher quality and cleaning properties, can be achieved with the formulation D-143 thanks to the effect of the cocamidopropyl betaine. By adjusting the air/water ratio of the dossification pump, the foam volume ca be controlled.
3 4
1/S 2
5/S 6/S
0
Alkaline D-143
20.0 10.0 10.0 5.0 0.2 e.q.
up to 100%
ALFANOX® 46 BETADET® HR TRILON M (40%) TEA (100%) NaOH (50%) Dye(s)
Deionized water
12.0 – 12.5 pH
Premium Quality
Guideline Formulations automatic washing
other formulations
2200 –– 4400 mmLL
11::33 –– 11::55
6 7 2 5 1
4/8 2/S
3
Alkaline D-151
5.0 4.0 4.0 3.0 11.0 e.q. 3.0
up to 100%
ALFANOX® 46 FINDET® 13/21 AKYPO® RLM 45 BG TRILON M (40%) NaOH (50%) TPPNa
Deionized water
11.0 – 11.5
pH
High-Pressure
The application method for high pressure is the same as described in the pre-wash process.
3300 –– 5500 mmLL
11::5500
1 3 4
5/S
0
Acidic D-150
2.0 2.0 e.q. 2.0
up to 100%
FINDET® 13/21 QUARTAMIN® TH-V H3PO4 (85%) MELIOSOL® CU-40
Deionized water
< 1.0 pH
Rim Cleaner
Apply the dilution at high pressure over the rim surface, wait one to two minutes and rinse it off.
BG Butyl glycol BDG Butyl di-glycol PnB Propylene glycol n-buthyl ether NTA Nitrilotriacetic acid NTA·3Na Sodium nitrilotriacetate TPPNa Sodium tripolyphosphate NaOH Sodium hydroxide TEA Triethanolamine Silicone rinse1 DC-245 Silicone rinse2 DC-536 H3PO4 Phosphoric acid Na2SiO3·5H2O S odium methasilicate
ABBREVIATIONS
3300 –– 5500 mmLL
11::5500
formula consumption per car
formula dilution for application
(*) order of addition – S:stir
Guideline Formulations
5 rim cleaner
During the first step most of the grime, road-film and large dirt particles are removed from the paintwork by spraying a high alkaline solution over the car in combination with the high pressure effect. The solution contains chemicals that begin loosening the roughest dirt which will be later removed entirely by means of the products applied in later steps , together with the action of the brushes. After the pre-wash, the surface of the car is wet down and prepared for the application of the detergents. The cleaning power required for the pre-wash is highly dependent on the degree and nature of dirt, which varies among different geographical zones, seasons and type of
vehicle to be washed.
The combination of foam-forming surfactants, water and air creates a dense lather that covers the paintwork entirely, acting intensively during this period. Active foam ensures an outstanding cleaning action, while gently breaking down the dirt which has been left behind, carrying it away from the surface. The dirt is kept in suspension, which facilitates rinsing later. The chemical mixture typically contains some coloring agent, to make the
foam more obvious and pleasing to the eye.
This chemical blend, thanks to its hydrophobic character, reduces the surface tension of the water remaining from the rinse-off detergents; which creates an instantaneous water layer break. The water shrinks, forming large drops that are easily carried away from the paintwork by the effect of the blower. An efficient rinse-aid agent helps to reduce spotting and minimum wipe-down time can be achieved.
The shampoo plays an important role. Besides cleaning, it softens the surface of the paintwork, thereby maximizing the mechanical action of the brushes and protecting it from scratching. After applying the shampoo, the surface takes the acidic
character, which necessary for the optimal performance of the rinse-aid agent.
active foam 2
3 shampoo
1 pre-wash
This cleaning sequence can be applied to both automatic tunnels and roll-overs. However, these can take
different configurations and may offer more complex cleaning programs than the explained here.
Polishing is usually optional in most carwash tunnels. The objective of this step is to cover the scratches that the paintwork might have, providing an even surface. This process, apart from protecting, leaves the surface in better physical condition for applying the
rinse-aid and protection waxes.
polishing 4
Guideline Formulations the washing process
rinse-aid 6
Rims are particularly prone to dirt from the abrasive wear of the braking system. The rims should therefore be cleaned regularly, not only from an aesthetic point of view, but also because of the possible damage that can be caused by abrasion particles “burning” into the rims. The effect of the wheel brushes in standard automatic carwashes, are generally
not efficient. A specific chemical cleaner is often required.
blower
Formulation Components
% Active Matter Appearance at 20ºC Chemical Description Trademark
Sodium Laureth Sulfate Sodium Laureth Sulfate Dodecylbenzene Sulfonic Acid
Sodium α-Olefin Sulfonate Laureth-6 Carboxylic Acid
Sodium Cumen Sulfonate
EMAL® 227 E or 228D EMAL® 270 E or 270D SULFONAX® ALFANOX® 46 AKYPO® RLM 45 CA
MELIOSOL® CU-40
≈ 27
≈ 70 95 min.
≈ 37
≈ 92
40
Liquid Paste Liquid Liquid Liquid
Liquid
aanniioonniicc ssuurrffaaccttaannttss
% Active Matter Appearance at 20ºC Chemical Description Trademark
Isotrideceth-9
Glycerides, C8-10, Ethoxylated(7) Cocamidopropylamine Oxide
Laureth-4 / Myreth-4 PEG-40 Castor Oil Cetyl Octanoate Deceth-6
FINDET 13/21
EMANON XLF
OXIDET L-75 C
FINDET 1214N/16
FINDET AR/52
EXCEPARL HO
FINDET 10/18
≈ 100
≈ 100
≈ 33
≈ 100
≈ 100
≈ 100
≈ 100
Opaque paste Liquid Liquid Liquid Viscous liquid Liquid
Liquid
nnoonn--iioonniicc ssuurrffaaccttaannttss
% Active Matter Appearance at 20ºC Chemical Description Trademark
Cocamidopropyl Betaine BETADET HR ≈ 30 Liquid
aammpphhootteerriicc ssuurrffaaccttaannttss
% Active Matter Appearance at 20ºC Chemical Description Trademark
Steartrimonium Chloride
Oleic TEA quat Alkyl Trimethyl Ammonium Methosulfate
QUARTAMIN TH-V
TETRANYL CAR/AO
TETRANYL DM-24
≈ 50
≈ 90
≈ 30
Liquid Liquid
Liquid
ccaattiioonniicc ssuurrffaaccttaannttss
% Active Matter Appearance at 20ºC Chemical Description Trademark
Non-ionic surfactants Anionic Surfactants and Polymers Waxes, Polymers and Non-ionic
..Surfactants
DANOX DB-1
AKYPO GENE KTS
EMULSION AF-400
≈ 78
≈ 31
≈ 33
Liquid Opaque Liquid
Opaque Liquid
bblleennddss
all surfactants are Readily Biodegradable according to European regulation 648/2004/EC
All formulations have been submitted succesfully at 1month stability at 5ºC/RT/40ºC.
Car Care
The technology of the surfactants applied to the care of your vehicle
Automatic Wash Manual Wash Drying-aids High Pressure Cleaning Complementary Cleaning
GGuuiiddeelliinnee ffoorrmmuullaarryy
Kao Corporation, S.A. Puig dels Tudons, 10
E-08210 Barberà del Vallès (Barcelona) Spain
Tel: +34 93 7399-300 Fax: +34 93 7399-377
e-mail:[email protected]
Kao Chemicals GmbH Kupferstrasse 1
D-46446 Emmerich, Germany Tel: +49(0)2822711-0
Fax: +49(0)2822 711-201 e-mail: [email protected]
KKaaoo CChheemmiiccaallss EEuurrooppee www.kaochemicals-eu.com
Our Chemicals, Your Business
Our mission is “to strive for the wholehearted satisfaction and enrichment of the lives of people globally” through the Company’s core domain of value added chemicals. Fully committed do this mission, all members of the Kao Group work together with passion to provide products of excellent value created from customer’s perspective. In so
doing, we “share joy with the customer”.
Mission
Vision
TThhee KKaaoo WWaayy
We aim to be “a global group of companies that is closest to the customer in each market”, earning the respect and trust of all stakeholders and contributing to the sustainable
development of society.