Capacitance Calculation for Medium Voltage Single and Double Bushing Capacitors
description
Transcript of Capacitance Calculation for Medium Voltage Single and Double Bushing Capacitors
Capacitance Calculation
This web page can be used to calculate the capacitance of a single phase single or double bushingcapacitor commonly used on medium and high voltage capacitor banks. Use Table one when thecapacitor frequency and capacitive reactance is known. Use table two when the capacitor frequency,
kvar, and voltage rating are known.
Table 1 - Calculation of Capacitance
Known Variables: Capacitor Frequency and Capacitive Reactance at frequency "f"
Input capacitor frequency (Hertz)
Input Capacitor Reactance (Ohms)
Calculated Capacitance (Micro-Farads)
Table 2 - Calculation of Capacitance
Known Variables: Capacitor Voltage, kvar, and frequency rating
Input capacitor voltage rating (kv)
Input capacitor kvar rating (kvar)
Input Capacitor Frequency Rating (Hertz)
Calculated Capacitance (Micro-Farads)
Northeast Power Systems, Inc.
66 Carey RoadQueensbury, New York 12804
Phone: 518-792-4776
Fax: 518-792-5767
E-mail: [email protected]: www.nepsi.com
Copyright © 1999 - 2009 Northeast Power Systems, Inc.
Capacitance Calculation for Medium Voltage Single and Double Bushin... http://www.nepsi.com/cap_calculation.htm
1 of 1 7/9/2012 10:43 PM