Cantilever Rackingsurgestorage.co.uk/.../2018/12/CANTILEVER-RACKING-V4.pdfCantilever Racking Because...
Transcript of Cantilever Rackingsurgestorage.co.uk/.../2018/12/CANTILEVER-RACKING-V4.pdfCantilever Racking Because...
Cantilever RackingVersatile storage for long lengths and irregular shapes
Product overview
Fully tested for peace of mind
The Storax Cantilever Racking design has
been subjected to stringent metallurgical
and structural testing in the factory.
This ensures that it is manufactured to the
highest possible standards, and that safety
and performance are both guaranteed.
Storax Cantilever Racking provides bespoke storage
for materials of all shapes and sizes, in both static
and dynamic applications. It is particularly suitable
for the storage of long, bulky and irregular-shaped
items that can’t be palletised. It can be used with all
designs and makes of fork lift trucks and handling
equipment.
The full product range is available in component
form or as part of a full design and installation service,
through the Storax distribution network.
Details that count
Meeting the storage needs of long-length and awkw
The key to the system’s versatility
is its uncomplicated design.
Storax Cantilever Racking is a bolted
system, which means that on-site
assembly requires only basic lifting
equipment and everyday tools.
The adjustable arms can be fitted on a
100mm pitch, for maximum flexibility.
They are simply offered up at the
desired height and are held in place
with a security pin, which locates into
the upright slot.
Manufactured from thin gauge,
cold rolled steel, the Storax system is
light but strong. The 3 main
components – base beams, uprights
and arms - are produced in a range
of duties and sections. This allows
a tailored system to be designed for
almost any application.
You can be confident that Storax
Cantilever Racking is designed and
manufactured to the highest
engineering standards. Advice and
guidance about the product is available
from the technical staff in the Storax
office, who can also design and
cost your project to deliver the optimal
specification for your needs.
"""""
...safety in mind
At Storax we strive to combine quality products with quality service. To improve and maintain our standards, Storax is a member of both SEMA and SHEDA in the UK, and FEM in Europe, where we take an active part in the compilation of new European standards for racking products.
Strength in design...
From pipes to pianos, Cantilever racking can accommodate all
Cantilever Rackingwardly shaped goods
Cantilever racking can provide
secure storage for virtually
any items that are stored in
long lengths. You are limited
only by your available
space – not by the racking.
This makes it ideal for items
including pipes, bars, tubes
and cylinders.
Cantilever systems are also
ideal for storing bulky items
which don’t lend themselves
to being accommodated in
‘standard’ racks. Bulk timber,
plasterboard sheets,
over-sized paper, panels and
flat-pack furniture are just
some examples of products
that can be stored
efficiently and securely in
Storax Cantilever Racking.
The system also excels at
storing items that are
irregular in shape and which
need to be accommodated
within the safety of the
racking framework with
minimal wasted capacity.
The scope is limited only by
your imagination.
If you need to adjust the heights of your locations,
the arms can be quickly and easily moved.
If your warehouse operates with random locations,
or if you have a constantly changing stockholding,
cantilever racking provides excellent flexibility.
Continuous runs mean that your occupancy rates
can be maximised. You need never have something
to store that won’t fit, or empty locations which
are too short to be useful.
Adaptability
Cantilever Racking
Because Storax Cantilever Racking is engineered to be fully
scaleable, it is equally suitable for use in large applications.
Continuous, uninterrupted runs are achievable, with their total
span limited only by the space available. In addition, racks can
be designed upwards, to exploit available vertical height.
Even when fully loaded, the system’s open design provides
excellent visibility and maximises light penetration, helping to
optimise the ‘put away’ and ‘retrieve’ operations.
From a small stores area ...
...to a large warehouse
With its compact design, even the
smallest of spaces can accommodate a
Storax Cantilever Rack, to provide
valuable additional storage capacity.
Every rack is tailored to suit the available
space, the items to be stored and
the handling equipment being used.
With this integrated approach, it is
possible to achieve high-density storage
and minimum space requirement.
Experience in store
Storax SP80 can be used in its own right to provide
tailor-made racking solutions, and can also provide a
framework for other methods of pallet storage, including
Push Back Rack, Glidestock and Mobile Storage Systems.
Storax Cantilever racking is the ideal product when long
lengths need to be stored.
Storax IM50 is one of Europe’s favourite bolt-free
hand-loaded shelving systems. A range of accessories
adds to this popular product’s versatility and makes it
a logical choice for many industrial and semi-commercial
applications.
Storax Slotted Angles are still faithful to the original
Dexion designs and, used in conjunction with the normal
range of accessories, remain as flexible in their applica-
tions today as they have always been.
A subsidiary of F Ramada of Portugal – Storax Racking Supplies was formed
in 2003 to supply a wide range of Ramada products, solely through trade outlets in
the UK and elsewhere in Europe.
The founding members of Storax Racking Supplies are all ex-employees of Dexion
Ltd. Collectively we offer more than 80 years’ experience of the industrial storage
sector. Having worked in different areas of the business, our varied knowledge
and experience enable our team to provide accurate product information, technical
design advice, a prompt and efficient order-processing service and reliable customer
support from the quotation stage to completion of every order. Our warehouse
staff pride themselves on their excellent record for accurate picking and clear,
careful packing.
Working out of our Hertfordshire office and warehouse north of London, we
continuously adapt our product offering and services to respond to the changing
needs of our customers. We can offer a wide range of racking, shelving and
associated accessories from stock, and a made-to-order service from the factory in
Portugal for non-standard sizes and colours.
Range of products available... and more
SP80 Racking Dynamic Racking Mobile Racking
Cantilever Racking IM50 Shelving Slotted Angle