Canon EOS 40D Shutter Assembly Replacement · Schritt 1 — Shutter Assembly Get the Canon 40D...
Transcript of Canon EOS 40D Shutter Assembly Replacement · Schritt 1 — Shutter Assembly Get the Canon 40D...
Canon EOS 40D Shutter AssemblyReplacement
An Error 99 is an non specific error which means that camera doesn't know or have a code for theproblem. In my case the shutter assembly needed replacing.
Geschrieben von: leggman7
Canon EOS 40D Shutter Assembly Replacement
© iFixit — CC BY-NC-SA de.iFixit.com Seite 1 von 6
EINLEITUNG
An Error 99 is an non specific error which means that camera doesn't know or have a code for theproblem. In my case the shutter assembly needed replacing. This was a fairly involved process for abeginner such as myself.
This is not a comprehensive guide but should be used in conjunction with the Canon Service Manualand youtube videos. I hope that some of the pictures I took along the way might help you identify orremember how each step works.
WERKZEUGE:small philips screwdriver (1)
Soldering Station (1)
Canon EOS 40D Shutter Assembly Replacement
© iFixit — CC BY-NC-SA de.iFixit.com Seite 2 von 6
Schritt 1 — Shutter Assembly
Get the Canon 40D Service RepairManual
Have a clean and organizedworkspace. I labelled plastic trays bystep number and put all items foreach step in a separate tray.
Watch a couple Youtube videos onthis process
Schritt 2
Peel off rubber grips
Canon EOS 40D Shutter Assembly Replacement
© iFixit — CC BY-NC-SA de.iFixit.com Seite 3 von 6
Schritt 3
take off front piece
Schritt 4
take off rear
connectors disconnect by flipping black/brown tab up and sliding plastic tab out.
Canon EOS 40D Shutter Assembly Replacement
© iFixit — CC BY-NC-SA de.iFixit.com Seite 4 von 6
Schritt 5
Take off top cover
Schritt 6
take off bottom plate
disconnect and remove bottom board
Canon EOS 40D Shutter Assembly Replacement
© iFixit — CC BY-NC-SA de.iFixit.com Seite 5 von 6
To reassemble your device, follow these instructions in reverse order.
Dieses Dokument wurde zuletzt angelegt am 2018-01-15 12:01:30 PM.
Schritt 7
remove CMOS assembly
Schritt 8
remove metal back
remove and replace shutterassembly, transfering componentsthat aren't on the new one
Canon EOS 40D Shutter Assembly Replacement
© iFixit — CC BY-NC-SA de.iFixit.com Seite 6 von 6