C&I BESS Solution
15
C&I BESS Solution Extreme safety, flexible and efficient
Transcript of C&I BESS Solution
C&I BESS SolutionExtreme safety, flexible and efficient
Our mission is to promote the use of clean
energy and ultimately achieve carbon neutrality
3e Smart energy storage system solutionsE-Block-based 3e smart energy storage solution, designed by device layer, link layer and data management hierarchical zoning, core products include energy block eBlock, energy chain eLink and energy cloud eMind.The "3e intelligent energy storage solution" can achieve fully building block efficient safety design from small 100 kWh energy storage units to large energy storage power station of class GWh
Power Grid
Energy metering Cluster control
High speedcommunication
Intelligent charging
Photovoltaicpower station
Wind power plant Commercialpremises
Data center Smartfactory
Charging Pile
E-Mind
eLink
eBlock-172 eBlock-200 eBlock-372
Scheduletranslations
AI-BasedBMS
IntelligentOperations
EconomicEvaluation
Design of energy storage equipment layer eBlock, link layer-eLink and clouddata layer eMind hierarchical partition
Product introduction
Advantages
Using the design concept of "ALL in one", the PCS-1000, active safety system of long-life battery, high-performance converter system of BMS intelligent power distribution system and heat management system are integrated into a single standardized outdoor cabinet, forming an integrated plug-and-play smart energy block product
Standardized cabinets realize the safety isolation of energy storage system partition, level 9 active safety monitoring and early warning design, and PACK level immersion proprietary fire control technology to ensure the safety and control of the system
Single battery pack string design, efficient multi-level topology and minimum loss frequency conversion modulation technology, optimal air duct design and intelligent ambient temperature control technology, PCS and battery pack string make the system conversion efficiency> 91%
Integrate all the energy storage system compo-nents, whose output can be directly connected to the wind power and photovoltaic systems.Single cabinet can be fully self-consistent control, multi-cabinets can realize the infinite expansion of the energy storage system in parallel, and truly realize the plug and play of the energy storage system
Various operation control modes such as peak filling, demand management, optical storage control, storage and charging control and high-speed scheduling, which are applicable to almost all application scenarios; operation data can be connected to the eMind, of singu-larity energy cloud through WIFI, 5G, LAN and realized unattended
Safe andreliable
Costeffective
Plug andplay
Smart andfriendly
Circuit block diagram
Fuse
External comm
unication interface
Air conditioning Firefighting controlGas monitoring Temperature and humidity
Performance parameter
ModelDC battery parameters
Cell type
Battery Pack configuration
Battery system configuration
Battery voltage range
Number of temperature tests
AC rating
Maximum AC power
Distortion rate of AC current
DC component
Rated grid voltage
Power factor
Power factor adjustable range
Rated grid frequency
Maximum system power
Charge&discharge ratio
Depth of discharge
Cycle life
Charge&discharge switching time
Communication interface
Level of protection
Type of cooling Forced air cooling
without condensation
Aerosolid and water immersion
Operating temperature
Relative humidity
Noise
Size（L*W*H）
Fire fighting system
Weight
AC side Parameters
System parameter
Product introductionUsing the design concept of "ALL in one", the PCS-2000, active safety system of long-life battery, BMS, high-performance converter system of battery management system, intelligent power distribution system and heat management system are integrated into a single standardized outdoor cabinet, forming an integrated plug-and-play smart energy block product
Standardized cabinets realize the safety isolation of energy storage system partition, level 9 active safety monitoring and early warning design, and level PACK immersion proprietary fire control technology to ensure the safety and control of the system
Single battery pack string design, efficient multi-level topology and minimum loss frequency conversion modulation technology, optimal air duct design and intelligent ambient temperature control technology, PCS and battery pack string make the system conversion efficiency> 91%
Integrating all energy storage system compo-nents, 690V and 800V AC output provides direct access to wind and PV systems.Single cabinet can be fully self-consistent control, multi-cabi-nets can realize the infinite expansion of the energy storage system in parallel, and truly realize the plug and play of the energy storage system
Various operation control modes such as peak filling, demand management, optical storage control, storage and charging control and high-speed scheduling, which are applicable to almost all application scenarios; operation data can be connected to the eMind, of singu-larity energy cloud through WIFI, 5G, LAN and realized unattended
Safe andreliable
Costeffective
Plug andplay
Smart andfriendly
Circuit block diagram
Fuse
External comm
unication interface
Air conditioning Firefighting controlGas monitoring Temperature and humidity
Performance parameter
Model
Cell type
Battery Pack configuration
Battery system configuration
Battery voltage range
Number of temperature tests
AC rating
Maximum AC power
Distortion rate of AC current
DC component
Rated grid voltage
Power factor
Power factor adjustable range
Rated grid frequency
Forced air cooling
without condensation
Aerosolid and water immersion
Maximum system power
Charge&discharge ratio
Depth of discharge
System voltage SY
Cycle life
Charge&discharge switching time
Communication interface
Level of protection
Type of cooling
Operating temperature
Relative humidity
Noise
Size（L*W*H）
Fire fighting system
Weight
DC battery parameters
AC side Parameters
System parameter
Product introduction Advantages
Highlyintegrated
Quickscheduling
Scaleflexibility
Circuit block diagram
Link unit of the energy flow and data flow of the energy storage system
Connect downward energy block eBlock, upward to connect the user distribution system, complete the conflu-ence of output AC power, control protection, measure-ment, and realize the two -way link and management of energy flow
At the same time, it also serves as a connecting bridge between eBlock and smart energy cloud eMind, and it realizes the high-speed communication connection between local and cloud data, and provides a reliable data collection, storage and control management platform for eMind
The fusion design of intelligent power distribution and high-speed control realizes the highly integrated design of system energy flow and data flow
DSP+ARM+FPGA control platform and 1GHz bus speed enable response to <20mS power output
The eLink control system can be flexibly extend-ed through the 2 cascade to realize the rapid collaborative control of super thousand energy blocks of GWh power station
Remote RTU system
Ethernet
EtherCAT
RS485、DI/DO RS485、DI/DO
E-link central control unit
1#Array
Ringmonitoring
Boxtransformer
control
Ringmonitoring
Boxtransformer
control
N#Array
EMS server BMS Server
E-link square array controller
E-link square array controller
PCS 1#
PCS N#
CAN
BMU 1# BMU N#
PCS 1#
PCS N#
CAN
BMU 1# BMU N#
Energy cloud eMind product is a collection of application services such as data aggregation display, strategy control, opera-tion analysis, big data mining and other energy storage system. Based on the micro-service architecture, it can be flexibly deployed on the public or private cloud
With a storage mode based on the timing database, the energy cloud eMind has the ability to display and store each cell voltage and temperature of the energy storage system, and can support operation data traceability and fault breakpoint recording at any past period of the energy storage power station
Through the statistical analysis of big data, the mining and analysis of the thermal management operation data and battery health of the energy storage equipment are realized, which enables the decision-making judgment and risk prediction of the energy storage power stations, so that the energy storage power stations can be truly realized unattended
Product introduction
Operation andmaintenance management
Business Services
Run schedule
eMind-App eMind-Web
Relationaldatabase
Data acquisition Wire transmission
Transformer Photovoltaic powergeneration
wind powergeneration Grid
Wireless transmission
Sequentialdatabase
Distributeddata storage
Risk controlearly warning
Data analysisand miningData access
Data store
Perceived transmission
Mechanical floor
Detailed to the voltage and temperature of each battery, comprehensive and no omission display, store the operation data of the energy storage power station
It can automatically record the breakpoint data at the fault time to query and trace the operation process of the energy storage power station
Automatically realize battery calibration main-tenance, power station operation report output
Through the analysis of battery operation data, it has the data of energy storage system and battery system
Advantages
Panorama monitoring Process backtracing Intelligent operationand maintenance
Data mining
Commercial and industry energy storage
Application Scenarios
Distributed energy block energy storage products can be flexibly deployed in various industrial and commercial parks.By peak shaving and reducing capacity, users can save electricity costs, improve electricity quality, and provide emergency power preparation services for important loads
The fire fighting device directly connects to each battery tank to ensure safe control of electrochemi-cal energy storage
Single cabinet covers a small area, can be scattered deployment, centralized scheduling, convenient for flexible placement
All data of the energy storage power station operation is connected to the cloud, which can be monitored in real time to realize unattended operation
Project advantage
Extreme security Flexible deployment Operational convenience
Optical storage and charge fusion application
Distributed energy block energy storage products can be integrated and applied with photovoltaic systems and charging pile systems. Through the two-way adjustment ability of energy storage equipment to electric energy, the spontaneous self-utili-zation rate of photovoltaic power generation is improved, and the impact of high-power electrical equipment such as charging piles on the load of transformers is reduced, so as to achieve peak capacity expansion and meet the charging demand to the greatest extent
According to the charging pile power and photovoltaic power, the energy storage capacity can be flexibly adapted
Combined with the on-site environment, flexible deploy-ment,Easy to install
The whole system has self-consis-tent control, scattered deployment and centralized scheduling to avoid power reverse current and trans-former load
Project advantage
Flexible fit Easy to deploy Flexible scheduling
New energy storage station-energy block
The distributed energy block energy storage system can be used in conjunction with wind and solar power stations. Stabilize the fluctuation of new energy power generation, reduce the rate of abandonment of wind and solar, respond to AGC dispatch, and realize the power grid Electric power auxiliary services such as peak shaving and frequency modulation
Project advantage
Produced energy storage products bring a standardized energy storage system design scheme to simplify the design of energy storage power station
The energy block energy storage system can flexibly supplement the power, avoid the rearrangement of the battery system, and support the mixing of old and new batteries
Modular product design can greatly simplify the on-site operation and maintenance process, avoid experts standing, automatic battery calibration, plug and play of spare parts, and save operation and main-tenance costs
Standard design Elastic expansion Extremely operation
Company Address:
Intelligent Manufacturing Base , Xianyang , Shaanxi , PRC .
Tel: (+86) 029-38367888
Web: www.cfenergygroup.com
E-mail:[email protected]
CF Energy Co., Ltd.
English Language
Felix Wang，Mob/Whatsapp/Wechat:0086-13717762770
Chris Wu，Mob/Whatsapp/Wechat:0086-18661316123
Erica Hu，Mob/Whatsapp/Wechat:0086-15222393724
Adeline Chen，Mob/Whatsapp/Wechat:0086-18303014060
Jerry Li，Mob/Whatsapp/Wechat:0086-18800427504
Spanish Language
Silvia Yan，Mob/Whatsapp/Wechat:0086-15701699087
E-mail:[email protected]
Web: www.icnbm.com; www.cnbmsolar.com
CNBM INTERNATIONAL CORPORATION
First-class power battery system supplier First-class supplier of energy storage and microgrid
Fortune Global 500Global Exclusive Distributor
C&I BESS Solution Version 1.3
